diff options
Diffstat (limited to 'sci-libs/plplot/files')
7 files changed, 0 insertions, 325 deletions
diff --git a/sci-libs/plplot/files/plplot-5.15.0-QPainterPath-include.patch b/sci-libs/plplot/files/plplot-5.15.0-QPainterPath-include.patch deleted file mode 100644 index 3c6b85b1714e..000000000000 --- a/sci-libs/plplot/files/plplot-5.15.0-QPainterPath-include.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/include/qt.h -+++ b/include/qt.h -@@ -67,6 +67,7 @@ - #include <QMainWindow> - #include <QPicture> - #include <QMutex> -+#include <QPainterPath> - - #include "plDevs.h" - #include "plplotP.h" diff --git a/sci-libs/plplot/files/plplot-5.15.0-configure-clang16.patch b/sci-libs/plplot/files/plplot-5.15.0-configure-clang16.patch deleted file mode 100644 index 1f72da24ffb0..000000000000 --- a/sci-libs/plplot/files/plplot-5.15.0-configure-clang16.patch +++ /dev/null @@ -1,18 +0,0 @@ -https://bugs.gentoo.org/898258 -https://sourceforge.net/p/plplot/patches/37/ - -Avoid implicitly declaring exit. Future compilers will not support -implicit function declarations, so this cmake probe will always fail. - ---- a/cmake/modules/TestForHighBitCharacters.c -+++ b/cmake/modules/TestForHighBitCharacters.c -@@ -17,6 +17,6 @@ int - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) -- exit(1); -- exit (0); -+ return 1; -+ return 0; - } - diff --git a/sci-libs/plplot/files/plplot-5.15.0-ieee.patch b/sci-libs/plplot/files/plplot-5.15.0-ieee.patch deleted file mode 100644 index 065f59a52dfd..000000000000 --- a/sci-libs/plplot/files/plplot-5.15.0-ieee.patch +++ /dev/null @@ -1,19 +0,0 @@ -diff -up plplot-plplot-a9d9500c732d4eae47ed7fca687e02ec8a48d02c/cmake/modules/csiro.cmake.ieee plplot-plplot-a9d9500c732d4eae47ed7fca687e02ec8a48d02c/cmake/modules/csiro.cmake ---- plplot-plplot-a9d9500c732d4eae47ed7fca687e02ec8a48d02c/cmake/modules/csiro.cmake.ieee 2018-09-19 20:31:11.333168883 -0600 -+++ plplot-plplot-a9d9500c732d4eae47ed7fca687e02ec8a48d02c/cmake/modules/csiro.cmake 2018-09-19 20:31:56.323728783 -0600 -@@ -27,15 +27,6 @@ option(WITH_CSA "Enable use of the csa l - # expanded to a lot more cases as we gain platform experience. - set(NAN_CFLAGS ${CMAKE_C_FLAGS}) - if(PL_HAVE_QHULL OR WITH_CSA) -- if(CMAKE_SYSTEM_PROCESSOR MATCHES "i[0-9]86" AND NOT CMAKE_C_COMPILER MATCHES "gcc") -- set(NAN_CFLAGS "${NAN_CFLAGS} -mieee-fp") -- elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "alpha.*") -- if(CMAKE_C_COMPILER MATCHES "gcc") -- set(NAN_CFLAGS "${NAN_CFLAGS} -mieee") -- else(CMAKE_C_COMPILER MATCHES "gcc") -- set(NAN_CFLAGS "${NAN_CFLAGS} -ieee") -- endif(CMAKE_C_COMPILER MATCHES "gcc") -- endif(CMAKE_SYSTEM_PROCESSOR MATCHES "i[0-9]86" AND NOT CMAKE_C_COMPILER MATCHES "gcc") - if(NOT DEFINED NaNAwareCCompiler) - message(STATUS "Check for NaN awareness in C compiler") - try_run(RUN_RESULT COMPILE_RESULT diff --git a/sci-libs/plplot/files/plplot-5.15.0-multiarch.patch b/sci-libs/plplot/files/plplot-5.15.0-multiarch.patch deleted file mode 100644 index 4fc5b0b43d9e..000000000000 --- a/sci-libs/plplot/files/plplot-5.15.0-multiarch.patch +++ /dev/null @@ -1,56 +0,0 @@ -diff -up plplot-5.15.0/examples/c/Makefile.examples.in.multiarch plplot-5.15.0/examples/c/Makefile.examples.in ---- plplot-5.15.0/examples/c/Makefile.examples.in.multiarch 2019-09-17 21:47:24.535984257 -0600 -+++ plplot-5.15.0/examples/c/Makefile.examples.in 2019-09-17 21:50:37.029009186 -0600 -@@ -23,9 +23,6 @@ SHELL = @SH_EXECUTABLE@ - CC = @CC@ - EXEEXT = @EXEEXT@ - --PKG_CONFIG_ENV = @PKG_CONFIG_ENV@ --install_tree_c_RPATHCMD = @install_tree_c_RPATHCMD@ -- - @extXdrawable_true@extXdrawable_EXECUTABLES_list = \ - @extXdrawable_true@ extXdrawable_demo$(EXEEXT) - -diff -up plplot-5.15.0/examples/c++/Makefile.examples.in.multiarch plplot-5.15.0/examples/c++/Makefile.examples.in ---- plplot-5.15.0/examples/c++/Makefile.examples.in.multiarch 2019-09-17 21:47:24.536984262 -0600 -+++ plplot-5.15.0/examples/c++/Makefile.examples.in 2019-09-17 21:50:18.672911449 -0600 -@@ -23,15 +23,10 @@ SHELL = @SH_EXECUTABLE@ - CXX = @CXX@ - EXEEXT = @EXEEXT@ - --PKG_CONFIG_ENV = @PKG_CONFIG_ENV@ --install_tree_cxx_RPATHCMD = @install_tree_cxx_RPATHCMD@ -- --@wxwidgets_true@install_tree_wxwidgets_RPATHCMD = @install_tree_wxwidgets_RPATHCMD@ - @wxwidgets_true@PLPLOTWXWIDGETS_EXECUTABLES_list = \ - @wxwidgets_true@ @wxdemo_name@$(EXEEXT) - - @qt_gui_true@QT_MOC_EXECUTABLE = @QT_MOC_EXECUTABLE@ --@qt_gui_true@install_tree_qt_RPATHCMD = @install_tree_qt_RPATHCMD@ - @qt_gui_true@qt_gui_EXECUTABLES_list = \ - @qt_gui_true@ qt_example$(EXEEXT) - -diff -up plplot-5.15.0/examples/fortran/Makefile.examples.in.multiarch plplot-5.15.0/examples/fortran/Makefile.examples.in ---- plplot-5.15.0/examples/fortran/Makefile.examples.in.multiarch 2019-09-17 21:47:24.537984268 -0600 -+++ plplot-5.15.0/examples/fortran/Makefile.examples.in 2019-09-17 21:48:01.062178741 -0600 -@@ -24,7 +24,6 @@ SHELL = @SH_EXECUTABLE@ - Fortran = @FC@ - EXEEXT = @EXEEXT@ - --PKG_CONFIG_ENV = @PKG_CONFIG_ENV@ - install_tree_fortran_RPATHCMD = @install_tree_fortran_RPATHCMD@ - - EXECUTABLES_list = \ -diff -up plplot-5.15.0/examples/tk/Makefile.examples.in.multiarch plplot-5.15.0/examples/tk/Makefile.examples.in ---- plplot-5.15.0/examples/tk/Makefile.examples.in.multiarch 2019-09-17 21:47:24.538984273 -0600 -+++ plplot-5.15.0/examples/tk/Makefile.examples.in 2019-09-17 21:50:00.816816375 -0600 -@@ -24,9 +24,6 @@ SHELL = @SH_EXECUTABLE@ - CC = @CC@ - EXEEXT = @EXEEXT@ - --PKG_CONFIG_ENV = @PKG_CONFIG_ENV@ --install_tree_tk_RPATHCMD = @install_tree_tk_RPATHCMD@ -- - EXECUTABLES_list = xtk01$(EXEEXT) - # Second and fourth examples depend on itk. - @itk_true@itk_EXECUTABLES_list = xtk02$(EXEEXT) xtk04$(EXEEXT) diff --git a/sci-libs/plplot/files/plplot-5.15.0-ocaml-rpath.patch b/sci-libs/plplot/files/plplot-5.15.0-ocaml-rpath.patch deleted file mode 100644 index f3fe04d84a7c..000000000000 --- a/sci-libs/plplot/files/plplot-5.15.0-ocaml-rpath.patch +++ /dev/null @@ -1,166 +0,0 @@ -commit 6b215267e7baeae83906bec8dab72a549aeda6c8 -Author: Alan W. Irwin <airwin@users.sourceforge.net> -Date: Mon Sep 23 17:39:31 2019 -0700 - - Build system: Fix ocaml examples core build for -DUSE_RPATH=OFF case - - Thanks to Orion Poplawski for reporting this issue which is that the - *core build_tree* rpath manipulations for the ocaml examples were - being (incorrectly) skipped for the -DUSE_RPATH=OFF case. The fix for - this issue required non-trivial CMake logic changes so was extensively - tested (see below). - - Tested by: Alan W. Irwin <airwin@users.sourceforge.net> on Linux - (Debian Buster = Stable) with the following steps: - - # Choose these prefixes to assure that the source, build, and install - # trees have blanks in their pathnames (to test those cases during - # this comprehensive test) - COMPREHENSIVE_TEST_PREFIX="/home/software/plplot/HEAD/comprehensive_test_disposeable blank" - SOURCE_PREFIX="/home/software/plplot/HEAD/plplot blank .git" - - # Set CMAKE_PREFIX_PATH to access local versions of lua and libLASi to - # avoid important bugs in the Debian Testing versions of those - # packages. Also access a local version of libqhull to test that - # additional rpath possibility. - - # Put a local build of CMake-3.15.20190829-g3ec986c first on the PATH to thoroughly - # test our build system for a locally built CMake version that includes an - # essential fix so that D language support works properly for the ldc2 and dmd compilers. - - # For this particular test use the gdc D compiler if D enabled (which it was not, see below). - - # Use the -DUSE_INCRTCL_VERSION_4=ON option to help CMake find Tcl/Tk - # components. (This step will not be necessary as soon as the PLplot - # build system is modified to make Tcl/Tk/Itcl/Itk/Iwidgets finding - # more robust.) - - # Use -DSWIG_EXECUTABLE=/home/software/swig/install/bin/swig to test - # swig-4.0.0 that I built for myself. - - # To save time, constrain the test to just the ocaml binding and svg device. - - # To save a lot of babysitting of this test, constrain the test by dropping - # the interactive component. - - time (nice -19 env CMAKE_PREFIX_PATH=/home/software/lua/install-5.3.5:/home/software/lasi_svn/install:/home/software/qhull/install PATH=/home/software/cmake/install-3ec986ce8e/bin:"$PATH" DC=gdc "$SOURCE_PREFIX"/scripts/comprehensive_test.sh --prefix "$COMPREHENSIVE_TEST_PREFIX" --cmake_added_options "-DUSE_INCRTCL_VERSION_4=ON -DSWIG_EXECUTABLE=/home/software/swig/install/bin/swig -DDEFAULT_NO_BINDINGS=ON -DENABLE_ocaml=ON -DDEFAULT_NO_DEVICES=ON -DPLD_svg=ON " --build_command "make -j18" --ctest_command "ctest -j18" --do_test_interactive no) - - The time result on my Ryzen 7 1700 system with 16 hardware threads was - - real 4m12.625s - user 4m22.128s - sys 0m58.076s - - The above test was repeated with the following changes: - - # Specify LD_LIBRARY_PATH to workaround the lack of special rpath - # support for external local versions of software - - # Use the -DUSE_RPATH=OFF cmake option to drop all install-tree - # rpath support (and to ignore any special rpath support for - # external local versions of software). - - # Further constrain the test to be performed just for the core build tree - # since -DUSE_RPATH=OFF will obviously give bad results for the install - # tree for this non-standard installation location. - - time (nice -19 env CMAKE_PREFIX_PATH=/home/software/lua/install-5.3.5:/home/software/lasi_svn/install:/home/software/qhull/install PATH=/home/software/cmake/install-3ec986ce8e/bin:"$PATH" DC=gdc LD_LIBRARY_PATH=/home/software/lasi_svn/install/lib:/home/software/qhull/install/lib "$SOURCE_PREFIX"/scripts/comprehensive_test.sh --prefix "$COMPREHENSIVE_TEST_PREFIX" --cmake_added_options "-DUSE_INCRTCL_VERSION_4=ON -DSWIG_EXECUTABLE=/home/software/swig/install/bin/swig -DDEFAULT_NO_BINDINGS=ON -DENABLE_ocaml=ON -DDEFAULT_NO_DEVICES=ON -DPLD_svg=ON -DUSE_RPATH=OFF" --build_command "make -j18" --ctest_command "ctest -j18" --do_test_interactive no --do_test_install_tree no --do_test_traditional_install_tree no) - - The time result on my Ryzen 7 1700 system with 16 hardware threads was - - real 1m57.888s - user 1m42.156s - sys 0m26.478s - - Both these comprehensive tests (one which tests that the default - -DUSE_RPATH=ON still works for the ocaml case and one similar to - Orion's test case which tests that -DUSER_RPATH=OFF works for the - ocaml case in the core build tree) ran without issues (e.g., there - were no hangs or other obvious errors) and was followed up by the - evaluation procedure documented in doc/wiki_source/Testing_PLplot. - Those evaluations showed no configure, build, or obvious run-time - errors (i.e., no non-zero return codes for any of the steps in these - comprehensive tests), and the difference test results (done with the - default svg device) were perfect as well. - -diff --git a/examples/CMakeLists.txt b/examples/CMakeLists.txt -index 93cb01b..5bcbceb 100644 ---- a/examples/CMakeLists.txt -+++ b/examples/CMakeLists.txt -@@ -343,27 +343,24 @@ if(CORE_BUILD) - # Extra layer of -Wl indirection required for the nagfor compiler - string(REPLACE "-Wl," "-Wl,-Wl,," install_tree_fortran_RPATHCMD ${install_tree_fortran_RPATHCMD}) - endif(install_tree_fortran_RPATHCMD AND CMAKE_Fortran_COMPILER MATCHES "nagfor") -+ endif(USE_RPATH AND NOT WIN32_OR_CYGWIN) -+ -+ # ocaml is a special case not handled by the above logic for other languages -+ # because the (unofficial) CMake language support is -+ # implemented with low-level add_custom commands/targets so that rpath -+ # must be specified for 3 cases (the traditional build of the installed -+ # examples, and the CMake-based build of the build-tree and install-tree examples). -+ # Furthermore, the rpath syntax is different for ocaml. -+ if(ENABLE_ocaml) -+ set(language ocaml) - -- # ocaml is a special case because the (unofficial) CMake language support is -- # implemented with low-level add_custom commands/targets so that rpath -- # must be specified for 3 cases (the traditional build of the installed -- # examples, and the CMake-based build of the build-tree and install-tree examples). -- # Furthermore, the rpath syntax is different for ocaml. -- if(ENABLE_ocaml) -- set(language ocaml) -+ if(USE_RPATH AND NOT WIN32_OR_CYGWIN) - # Each of the installed examples that are built depend on a library installed in ${LIB_DIR}. - set(install_tree_${language}_RPATH ${LIB_DIR}) -- # The ocaml examples depend on the plplot library -+ # The ocaml examples depend on the plplot library so use INSTALL_RPATH -+ # property of that library target. - set(tll_arguments PLPLOT::plplot) - process_rpath(install_tree_${language}_RPATH "${tll_arguments}") -- -- # Special case of the ocaml build-tree examples. -- # Must be done before ${install_tree_${language}_RPATH gets transformed -- # from official CMake list to colon-separated form. -- set(build_tree_${language}_RPATH ${install_tree_${language}_RPATH}) -- list(REMOVE_ITEM build_tree_${language}_RPATH ${LIB_DIR}) -- list(APPEND build_tree_${language}_RPATH ${CMAKE_BINARY_DIR}/src) -- - # Transform from semicolon- to colon-separated list. (Quotes - # for last argument required to process whole argument as string - # containing semicolons rather than as the concatanated elements -@@ -372,19 +369,30 @@ if(CORE_BUILD) - # install- and build-tree versions of CMake-based build of ocaml - # examples - string(REGEX REPLACE ";" ":" install_tree_${language}_RPATH "${install_tree_${language}_RPATH}") -- string(REGEX REPLACE ";" ":" build_tree_${language}_RPATH "${build_tree_${language}_RPATH}") - string(REPLACE " " "\\ " install_tree_${language}_RPATH_ESCAPED "${install_tree_${language}_RPATH}") -- string(REPLACE " " "\\ " build_tree_${language}_RPATH_ESCAPED "${build_tree_${language}_RPATH}") -- - # install_tree_ocaml_RPATHCMD needed in configured traditional - # Makefile for the ocaml subdirectory. - # Ocaml compiler requires -ccopt in front of every -Wl option: - set(install_tree_${language}_RPATHCMD "-ccopt -Wl,-rpath -ccopt -Wl,\"${install_tree_${language}_RPATH_ESCAPED}\"") -+ endif(USE_RPATH AND NOT WIN32_OR_CYGWIN) - -- endif(ENABLE_ocaml) -+ # Special case of the ocaml build-tree examples. -+ # Follow above process_rpath logic but with some changes -+ # appropriate for the core build of the ocaml examples. -+ set(build_tree_${language}_RPATH ${CMAKE_BINARY_DIR}/src) -+ set(tll_arguments PLPLOT::plplot) -+ process_rpath(build_tree_${language}_RPATH "${tll_arguments}") - -+ # Get rid of any mention of ${LIB_DIR} for the core build version -+ # of the examples. -+ # Must be done before ${build_tree_${language}_RPATH gets transformed -+ # from official CMake list to colon-separated form. -+ list(REMOVE_ITEM build_tree_${language}_RPATH ${LIB_DIR}) - -- endif(USE_RPATH AND NOT WIN32_OR_CYGWIN) -+ string(REGEX REPLACE ";" ":" build_tree_${language}_RPATH "${build_tree_${language}_RPATH}") -+ string(REPLACE " " "\\ " build_tree_${language}_RPATH_ESCAPED "${build_tree_${language}_RPATH}") -+ -+ endif(ENABLE_ocaml) - - # Install Chloe.pgm in installed examples directory so that all implementations - # of example 20 in the various examples subdirectories can conveniently diff --git a/sci-libs/plplot/files/plplot-5.15.0-ocaml.patch b/sci-libs/plplot/files/plplot-5.15.0-ocaml.patch deleted file mode 100644 index 6f0827f334e5..000000000000 --- a/sci-libs/plplot/files/plplot-5.15.0-ocaml.patch +++ /dev/null @@ -1,43 +0,0 @@ -diff -up plplot-plplot-a9d9500c732d4eae47ed7fca687e02ec8a48d02c/bindings/ocaml/CMakeLists.txt.ocaml plplot-plplot-a9d9500c732d4eae47ed7fca687e02ec8a48d02c/bindings/ocaml/CMakeLists.txt ---- plplot-plplot-a9d9500c732d4eae47ed7fca687e02ec8a48d02c/bindings/ocaml/CMakeLists.txt.ocaml 2018-09-19 17:38:53.000000000 -0600 -+++ plplot-plplot-a9d9500c732d4eae47ed7fca687e02ec8a48d02c/bindings/ocaml/CMakeLists.txt 2018-09-19 20:32:29.884146436 -0600 -@@ -326,11 +326,11 @@ if(ENABLE_ocaml) - ${CMAKE_CURRENT_BINARY_DIR}/plplot.cmo - ) - -- # ocamlc -a -custom builds a *.cma library from *.cmo -+ # ocamlc -a builds a *.cma library from *.cmo - add_custom_command( - OUTPUT - ${CMAKE_CURRENT_BINARY_DIR}/plplot.cma -- COMMAND ${OCAMLC} -a -custom -o plplot.cma plplot_core.cmo plplot.cmo -dllib -lplplot_stubs -ccopt -L. -cclib -lplplot_stubs -ccopt -L${CAMLIDL_LIB_DIR} -cclib -lcamlidl ${ocaml_LIBRARIES_FLAGS} -+ COMMAND ${OCAMLC} -a -o plplot.cma plplot_core.cmo plplot.cmo -dllib -lplplot_stubs -ccopt -L. -cclib -lplplot_stubs -ccopt -L${CAMLIDL_LIB_DIR} -cclib -lcamlidl ${ocaml_LIBRARIES_FLAGS} - DEPENDS - ${CMAKE_CURRENT_BINARY_DIR}/plplot_core.cmo - ${CMAKE_CURRENT_BINARY_DIR}/plplot.cmo -@@ -341,7 +341,7 @@ if(ENABLE_ocaml) - add_custom_command( - OUTPUT - ${CMAKE_CURRENT_BINARY_DIR}/installed_plplot.cma -- COMMAND ${OCAMLC} -a -custom -o installed_plplot.cma plplot_core.cmo plplot.cmo -dllib -lplplot_stubs -ccopt -L. -cclib -lplplot_stubs -ccopt -L${CAMLIDL_LIB_DIR} -cclib -lcamlidl ${installed_ocaml_LIBRARIES_FLAGS} -+ COMMAND ${OCAMLC} -a -o installed_plplot.cma plplot_core.cmo plplot.cmo -dllib -lplplot_stubs -ccopt -L. -cclib -lplplot_stubs -ccopt -L${CAMLIDL_LIB_DIR} -cclib -lcamlidl ${installed_ocaml_LIBRARIES_FLAGS} - DEPENDS - ${CMAKE_CURRENT_BINARY_DIR}/plplot_core.cmo - ${CMAKE_CURRENT_BINARY_DIR}/plplot.cmo -diff -up plplot-plplot-a9d9500c732d4eae47ed7fca687e02ec8a48d02c/bindings/ocaml/plcairo/CMakeLists.txt.ocaml plplot-plplot-a9d9500c732d4eae47ed7fca687e02ec8a48d02c/bindings/ocaml/plcairo/CMakeLists.txt ---- plplot-plplot-a9d9500c732d4eae47ed7fca687e02ec8a48d02c/bindings/ocaml/plcairo/CMakeLists.txt.ocaml 2018-09-19 20:32:29.884146436 -0600 -+++ plplot-plplot-a9d9500c732d4eae47ed7fca687e02ec8a48d02c/bindings/ocaml/plcairo/CMakeLists.txt 2018-09-19 20:33:18.389750080 -0600 -@@ -91,11 +91,11 @@ if(ENABLE_ocaml AND OCAML_HAS_CAIRO) - ${CMAKE_CURRENT_BINARY_DIR}/plcairo.ml - ) - -- # ocamlc -a -custom builds a *.cma library from *.cmo -+ # ocamlc -a builds a *.cma library from *.cmo - add_custom_command( - OUTPUT - ${CMAKE_CURRENT_BINARY_DIR}/plcairo.cma -- COMMAND ${OCAMLC} -a -custom -o ${CMAKE_CURRENT_BINARY_DIR}/plcairo.cma -I ${PATH_TO_PLPLOT_CMA} plplot.cma ${CMAKE_CURRENT_BINARY_DIR}/plcairo.cmo -dllib -lplcairo_stubs -ccopt -L${CMAKE_CURRENT_BINARY_DIR} -cclib -lplcairo_stubs -ccopt -L${CMAKE_BINARY_DIR}/src -cclib -l${WRITEABLE_TARGET}plplot -dllpath ${CMAKE_BINARY_DIR}/src -+ COMMAND ${OCAMLC} -a -o ${CMAKE_CURRENT_BINARY_DIR}/plcairo.cma -I ${PATH_TO_PLPLOT_CMA} plplot.cma ${CMAKE_CURRENT_BINARY_DIR}/plcairo.cmo -dllib -lplcairo_stubs -ccopt -L${CMAKE_CURRENT_BINARY_DIR} -cclib -lplcairo_stubs -ccopt -L${CMAKE_BINARY_DIR}/src -cclib -l${WRITEABLE_TARGET}plplot -dllpath ${CMAKE_BINARY_DIR}/src - DEPENDS - ${CMAKE_CURRENT_BINARY_DIR}/plcairo.cmo - WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR} diff --git a/sci-libs/plplot/files/plplot-5.9.6-python.patch b/sci-libs/plplot/files/plplot-5.9.6-python.patch deleted file mode 100644 index d62ece2ec416..000000000000 --- a/sci-libs/plplot/files/plplot-5.9.6-python.patch +++ /dev/null @@ -1,13 +0,0 @@ -diff --git a/examples/python/CMakeLists.txt b/examples/python/CMakeLists.txt -index 7599164..8457490 100644 ---- a/examples/python/CMakeLists.txt -+++ b/examples/python/CMakeLists.txt -@@ -214,7 +214,7 @@ if(CORE_BUILD) - @ONLY - ) - -- set(python_location1 ${PYTHON_INSTDIR}) -+ set(python_location1) - set(python_location2) - set(python_location3) - set(python_location4) |