summaryrefslogtreecommitdiff
path: root/app-emulation/xen
diff options
context:
space:
mode:
Diffstat (limited to 'app-emulation/xen')
-rw-r--r--app-emulation/xen/Manifest21
-rw-r--r--app-emulation/xen/xen-4.7.2-r1.ebuild192
-rw-r--r--app-emulation/xen/xen-4.7.3.ebuild192
-rw-r--r--app-emulation/xen/xen-4.8.2.ebuild192
-rw-r--r--app-emulation/xen/xen-4.9.0.ebuild (renamed from app-emulation/xen/xen-4.8.2-r1.ebuild)7
5 files changed, 9 insertions, 595 deletions
diff --git a/app-emulation/xen/Manifest b/app-emulation/xen/Manifest
index d57ddb7e937d..bd4611133d4c 100644
--- a/app-emulation/xen/Manifest
+++ b/app-emulation/xen/Manifest
@@ -1,17 +1,8 @@
-AUX xen-4.6-efi.patch 1954 SHA256 6ac4fc1fc99e89a16838a54c8b0657a84caa296d739d1ce9443bf4f10cbe57db SHA512 361af33159cf49626e92d2815fd4422ea5b1d696a32ce2695ce75205fbbfb89d96b64a8af7332fffdc4a4390000bf52d3730403dfc2334af0da0bea59d58b689 WHIRLPOOL 2a2a306e8ab6c57c169b2adc46ac9e00208e8adf294e5da407406e392da0177c47e84bd21832147e665135ec618e2dd161f6f32c280d82c7f4583ff39bc532e2
-DIST xen-4.7.2-upstream-patches-0.tar.xz 45944 SHA256 e7783bc9adc939167eaef91e96fda506d2d52815f709b31952229891357e6b67 SHA512 6d4e23fb5a63fd191f893e31194b6397a394956846f356ae0119c656a92e7e22296e728286a98109b64a5736241b2317969f54915e7b487b4d7a64aae534614c WHIRLPOOL e185ce40085559d00a302eae8814b4c013817a5e4c0a2a9c56a6b4983b38e7103e44d0407fa78ea79fdbe8eefde346b994812851d8b4bad0bf08cb5721507c37
-DIST xen-4.7.2.tar.gz 20714281 SHA256 61494a56d9251e2108080f95b0dc8e3d175f1ba4da34603fc07b91cfebf358d5 SHA512 8f447e7feffec81fea5b5a4098968b8b8cebc6989e7b6a845413317644d5d328d6f12181d09266366200878ab6a29ab34c7235c1af7b55463a3fdaea40ee1500 WHIRLPOOL 27f3fd88846724e03bf9bb53133046cb79139950c9162dd9c9a85798e169259f73dc2fe4212e750ce9a8fd1d0abd99f1f76108faceb7bf1934ce0495377ee756
-DIST xen-4.7.3.tar.gz 20722625 SHA256 5b5385b476e59e4cf31ecc6dd605df38814b83432b8e8d917f18c8edfdfb708f SHA512 df596bef7f0f0e7f35246fb025913721dae5aa91da27f1b47a49256e9faa8f7dcb80e8c4679345c19614093c02059b6ced54fc51e6900a372b0e76b4ad827126 WHIRLPOOL 9e88db149e216651711cd56830fba33d587de60d57d53fd3ab3db231319f74e4e88222bf1b2bb9b20fea68739bccd4b26304c73a0ae25aad6dbbac64681e3a62
-DIST xen-4.8.2-upstream-patches-0.tar.xz 7540 SHA256 d4bd4ce76097c49ebbad67a64814b9b41af0528b390ade15814cf0fb144e5e77 SHA512 34118ac114773cfc01a464de2a93b14905d3fb5edd62ae093f6cb40758f89c7fdc8449d0b7e9bfbaaee812b6f32b0c21860adeebb609376a22ce231e405b0837 WHIRLPOOL 0ff8c2fe3c349e6dc85e98644a813dd590c42bc78c6bbf98cdf77ed516e73fe5ca72a44935eae77f6ff9dcba8fef5d24c181d24b63b15bc470e7ed59098d5808
-DIST xen-4.8.2-upstream-patches-1.tar.xz 29608 SHA256 7b1833eede01b7c8ae607614afd35c66ff009518cca972e2653d5828fb632aa6 SHA512 3ea002c37a0e2189f1846548a4aa607c42041cf093ec9a57509692dabe5c0b718151d183f5714443403d5cf8d4ab010a8f3893207bebf81cb85793282c30b457 WHIRLPOOL 0659a56e419918cb091ff0d87bf69a03464d2a0a0b4c6bad87521e83c40b48e210582d5fab2d9686b22b4ba839041be6e8aa39ab306a86ce18461d99c36be439
+AUX xen-4.6-efi.patch 1954 BLAKE2B c027aff764e83eef957241827980559ccfeec5525bf0ce6b6b2d38db565fd0f24b21609c1d497934ef823d42116eaf96799b45314f11f57a9238ab21f1255a00 SHA512 361af33159cf49626e92d2815fd4422ea5b1d696a32ce2695ce75205fbbfb89d96b64a8af7332fffdc4a4390000bf52d3730403dfc2334af0da0bea59d58b689
DIST xen-4.8.2-upstream-patches-2.tar.xz 38852 SHA256 12c1f1fd2adba22b923d2ee944e6e66794701393966f9e9e2079961e202f6d64 SHA512 536823eabf03e92585a8c5cde90ce502672dd1ec080b28b39411d6a778b899436a57bfb633f11c94d48d2f963848b7771e469f5ea53e84b580976f631f69cc5d WHIRLPOOL 5baf92709da895eccbe8b154c1d1cdf4c2f0faf5166ef2e4bbf32ca6899d8b88aa67ccd765a15a2f9a6d5200d4a1eb832775891d41c00a950855e5d1d4358e35
DIST xen-4.8.2.tar.gz 22522336 SHA256 cb1cc2f0985e3d8651215e5d24c1fcc3036994fa7cc495a5091a2c85ece2aff9 SHA512 7805531f73d23ecfff3439770e62d387f4254a444875670d53a0a739323e5d4d8f8fcc478f8936ee1ae8aff3e0229549e47c01c606365a8ce060dd5c503e87da WHIRLPOOL 8e54e79219f89640162673da471a02ee8a39bb884e2376a79a09226462903185b49a771fef51ceca54c4dd42a110ee1214db6dbf94235a156a17d6c597634c3d
-DIST xen-security-patches-26.tar.xz 8276 SHA256 2a21ec429f8952875f7d95f24697600e606326f1a16d5622cee73628cd0401c1 SHA512 f54fc7e720a70258263d29cc482b8269386818ad75792de87b0d0357fdb6af81f2102e5983100db47563435fa28f875a84e8c6d73d44797aadaf0c469d9fb0ec WHIRLPOOL b31667d8415dc1fbcd60160fdbc2fe0ad4de9bd2171fda875f5585b8d7821c4c035b029dbf382abacf4b6be745aeeb708f419fdcabdd86f78ff1c13703802e3f
-EBUILD xen-4.7.2-r1.ebuild 5385 SHA256 4378b88ad0cbc515f40c2cf1151281a77678799c96d932e25b75682510c93e99 SHA512 8eb417f766c4c07c80ec3ff53734f3c24d703ef3ce99dad0052dbd5b63232cf66e22470b9779e45ee6662e4057c78d13a3b01d9d7e5e7d8203bf78452cc08f3b WHIRLPOOL 90fd34819474f35141be31efc48f11a7838058cfe9b323ab46d0164bf7b5bca4ecd51694e7b2765a6e72b62b3dad8d4620252996263959ea4ba203ac74e1ae1e
-EBUILD xen-4.7.3.ebuild 5386 SHA256 74a72af9515f3ead828cc0906f754572a0a2b3fd5afefad45cdec4ac0508e744 SHA512 4f9b09496d2c6aafe5e5a6a50b8e3cc926856398ae46149e05a451f8ee2f615640fa3d2fb444d3a95ff3b00210f3249cd8828ec168b61e2466656ae5e7eb5a58 WHIRLPOOL f7d88913e532714664fa1f9eea03855b3bffcf5926bc0ba9401fa401c78fc2a9a056428886300a5d0549cad30c0cc35028bb386e92dfcf593af4ffc02d3610c8
-EBUILD xen-4.8.2-r1.ebuild 4938 SHA256 a45afb7fe85030bca1fb612d19d2c23172c82d4f975ece4a76c2256601cc1f66 SHA512 b343f5eeca869ce79bf5e63cd23711f5a974e7d498dd46805934dd7dda1f6e174dfdcca0f2259d6734bf912ef7e194c812e54a7b59778bf8d6fd853c8701c1c6 WHIRLPOOL a3443bd8c9bfe7ea10a4e65a2a8304881fa67b41d63a8ace9a25bf5ea7cd56dfdd00a2e36168dfeb1175a5f5e5f6a76a73709f117d34fa63d89513699bd50f17
-EBUILD xen-4.8.2-r2.ebuild 4933 SHA256 fb6581b3596436242c970fa044359735500c9e1732ba5a0ab3ba9e5e2dad64c4 SHA512 ce0551c26ed51598405eab862b42c872bccfe05e2064b2dd589e56c34828820356f4f39ffbffaf78cd07408e91569091de947cfe0cc0602faa3503063d3a7fa1 WHIRLPOOL f39164e4181af6292ff9939d0968699127889929652bb8d9726801fb1d1383e195ad6f5f4027ee615714c408dd295a4442ea3796db4e1c390333239a9f6f6d98
-EBUILD xen-4.8.2.ebuild 5379 SHA256 78930fde5e11e655cf854cc23739e074b350e0b931716309e6c5aa48394db511 SHA512 79edc5c83b563b69851112afa2971f21ad2971fe62f4e7a5feafe3cb31abc866e8cb4156cf83ceb17a6f033fc5c23789be47f2cc5ebe7ce1a76d6db3e60dad01 WHIRLPOOL b0c85962342bef988cdeb945250d1f847c08c9b68c1a1fcb882eb0846e73b6ea2356fedad265aef5d6abc7776aaa0530dff4b02b179805fcc4ff05a749d46f38
-MISC ChangeLog 19246 SHA256 ae107ab371c71d67ccbbb373a29add15e6203ecd6e42fbbce8d37ece1b186fc9 SHA512 b51269964858e15797062599b5b0329686c202da6aeeefeb3f72bec596f35080221ce7591db7a662d973eb1e17d80af8de953a27e1df70e365b9538e1d311bef WHIRLPOOL 72136dd18b3e3341e0fdad7abe3d75f633588c800c647a7a165c5a11741d6c98e492d22eaae4da40ce1d105c96db4ee9071ed0955ef2c376bb0d2e4415581339
-MISC ChangeLog-2015 39538 SHA256 43b9fcb224880329df3962d7a0a5f67469d8a29677e9dcbc002e5e5d45b488df SHA512 0a23ab62077924f2daad976e7cb9a3f16de0c7b5eee9be874e4606168b495fe6d9a06245c7c6a375e93b411776f09b4c176de8f7f05ab9eef578b677f179e27d WHIRLPOOL 48ba9ac7cf44b1522d3846df5b917bfbe36839b60d9bee3b151aaad7ade953af73c2bb852c7b7181be8eff26a34ceddad5d97c323b9bd014ecb160daf53c5261
-MISC metadata.xml 417 SHA256 ac72572b8c5d519f16fa2b5d99c9a6f251e3e47137715d6e66995c459999d7a4 SHA512 2708f84b8a1508eebc96539993ae1bde4b921d4401229c221e2bee9a0cd643fdf1f854fcbba6033ed68667d0efb00c25222f4c68535a96f2200084d8d8759946 WHIRLPOOL 26d40c14a50ef9616878047f05ff6eb607cc1f67505f457020e84a69147e22e1fcc55c353c68cb5232db27573151cd53b4e89a5bd1d47554586f98178f5f4599
+DIST xen-4.9.0-upstream-patches-0.tar.xz 58780 SHA256 f3539c0f620d168e4dcfc4c11f895bd6850c1c566d53a9d3366907662c2960e3 SHA512 98c601d791661a306e3dce5befb37b80de8a71cdd1759f3da00b199d48e3b9468efd1332e26ae044ad616b41a02771ad07a1c96972103b7e0aa39b93fb556999 WHIRLPOOL 711d3a5bcc9bd9afded35252b2efc0d4ba39ab9edb595328e4ebd808513c863e447e3554600328982a440fe936b7f68baf0b925f9d8ef8d17965439eed35d98b
+DIST xen-4.9.0.tar.gz 23361741 SHA256 cade643fe3310d4d6f97d0c215c6fa323bc1130d7e64d7e2043ffaa73a96f33b SHA512 97f8075c49ef9ec0adbe95106c0cff4f9379578fd568777697565476c3fd948335d72ddcacf8be65fd9db219c0a35dcdc007f355f7e5874dd950fd4c0a0f966f WHIRLPOOL 354527ea01f69c6ab632cffe8f50ca93721d9a89cbc4d84886d24b53fabdb7f62132b80e36189c30c0c9fae66b367eec7e00bb4df5f7af054ec27cec912ecf47
+EBUILD xen-4.8.2-r2.ebuild 4933 BLAKE2B bb5a4b58eb2820d1aaf50d395fca36192fbda8c0bb337771f22745591e41fb405798f53e8994771fad1a9c6598cc7c71864aa7c5f97d053847636af3227684df SHA512 ce0551c26ed51598405eab862b42c872bccfe05e2064b2dd589e56c34828820356f4f39ffbffaf78cd07408e91569091de947cfe0cc0602faa3503063d3a7fa1
+EBUILD xen-4.9.0.ebuild 4907 BLAKE2B 79f07a9604c8d3d20903d9da5f410d2ce1b85fd0b888d8f0b2ff8d768941abf0f18a006bd1748cb480beac6c9cd7c1434a0005b15e6d33c4bfc0e81905009498 SHA512 a70419e05a800da71ef24b097a950b7eea338c467fb0313d69fae25e7f6555b8ffdc3c7c27f18b11081625e315f5a90858668a56fe863cc21fe7c94357c08e57
+MISC metadata.xml 417 BLAKE2B 5713c8e5f27d56714938b7d2bed096c3b3f9fbb0ad9bce2bb3240e4a8556134cfc88efe0e2c7feb2e9cc722c11800e8433afa0d03746b05998909dd976230225 SHA512 2708f84b8a1508eebc96539993ae1bde4b921d4401229c221e2bee9a0cd643fdf1f854fcbba6033ed68667d0efb00c25222f4c68535a96f2200084d8d8759946
diff --git a/app-emulation/xen/xen-4.7.2-r1.ebuild b/app-emulation/xen/xen-4.7.2-r1.ebuild
deleted file mode 100644
index ae2733f74967..000000000000
--- a/app-emulation/xen/xen-4.7.2-r1.ebuild
+++ /dev/null
@@ -1,192 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-PYTHON_COMPAT=( python2_7 )
-
-inherit eutils multilib mount-boot flag-o-matic python-any-r1 toolchain-funcs
-
-MY_PV=${PV/_/-}
-MY_P=${PN}-${PV/_/-}
-
-if [[ $PV == *9999 ]]; then
- inherit git-r3
- KEYWORDS="amd64 x86"
- EGIT_REPO_URI="git://xenbits.xen.org/xen.git"
- SRC_URI=""
-else
- KEYWORDS="amd64 ~arm x86"
- UPSTREAM_VER=0
- SECURITY_VER=26
- GENTOO_VER=
-
- [[ -n ${UPSTREAM_VER} ]] && \
- UPSTREAM_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${P}-upstream-patches-${UPSTREAM_VER}.tar.xz"
- [[ -n ${SECURITY_VER} ]] && \
- SECURITY_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${PN}-security-patches-${SECURITY_VER}.tar.xz"
- [[ -n ${GENTOO_VER} ]] && \
- GENTOO_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${PN}-gentoo-patches-${GENTOO_VER}.tar.xz"
- SRC_URI="http://bits.xensource.com/oss-xen/release/${MY_PV}/${MY_P}.tar.gz
- ${UPSTREAM_PATCHSET_URI}
- ${SECURITY_PATCHSET_URI}
- ${GENTOO_PATCHSET_URI}"
-fi
-
-DESCRIPTION="The Xen virtual machine monitor"
-HOMEPAGE="http://xen.org/"
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="custom-cflags debug efi flask"
-
-DEPEND="${PYTHON_DEPS}
- efi? ( >=sys-devel/binutils-2.22[multitarget] )
- !efi? ( >=sys-devel/binutils-2.22 )"
-RDEPEND=""
-PDEPEND="~app-emulation/xen-tools-${PV}"
-
-# no tests are available for the hypervisor
-# prevent the silliness of /usr/lib/debug/usr/lib/debug files
-# prevent stripping of the debug info from the /usr/lib/debug/xen-syms
-RESTRICT="test splitdebug strip"
-
-# Approved by QA team in bug #144032
-QA_WX_LOAD="boot/xen-syms-${PV}"
-
-REQUIRED_USE="arm? ( debug )"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
- python-any-r1_pkg_setup
- if [[ -z ${XEN_TARGET_ARCH} ]]; then
- if use amd64; then
- export XEN_TARGET_ARCH="x86_64"
- elif use arm; then
- export XEN_TARGET_ARCH="arm32"
- elif use arm64; then
- export XEN_TARGET_ARCH="arm64"
- else
- die "Unsupported architecture!"
- fi
- fi
-
- if use flask ; then
- export "XSM_ENABLE=y"
- export "FLASK_ENABLE=y"
- fi
-}
-
-src_prepare() {
- # Upstream's patchset
- if [[ -n ${UPSTREAM_VER} ]]; then
- EPATCH_SUFFIX="patch" \
- EPATCH_FORCE="yes" \
- EPATCH_OPTS="-p1" \
- epatch "${WORKDIR}"/patches-upstream
- fi
-
- # Security patchset
- if [[ -n ${SECURITY_VER} ]]; then
- einfo "Try to apply Xen Security patch set"
- # apply main xen patches
- # Two parallel systems, both work side by side
- # Over time they may concdense into one. This will suffice for now
- EPATCH_SUFFIX="patch"
- EPATCH_FORCE="yes"
-
- source "${WORKDIR}"/patches-security/${PV}.conf
-
- for i in ${XEN_SECURITY_MAIN}; do
- epatch "${WORKDIR}"/patches-security/xen/$i
- done
- fi
-
- # Gentoo's patchset
- if [[ -n ${GENTOO_VER} ]]; then
- EPATCH_SUFFIX="patch" \
- EPATCH_FORCE="yes" \
- epatch "${WORKDIR}"/patches-gentoo
- fi
-
- epatch "${FILESDIR}"/${PN}-4.6-efi.patch
-
- # Drop .config
- sed -e '/-include $(XEN_ROOT)\/.config/d' -i Config.mk || die "Couldn't drop"
-
- if use efi; then
- export EFI_VENDOR="gentoo"
- export EFI_MOUNTPOINT="boot"
- fi
-
- # if the user *really* wants to use their own custom-cflags, let them
- if use custom-cflags; then
- einfo "User wants their own CFLAGS - removing defaults"
- # try and remove all the default custom-cflags
- find "${S}" -name Makefile -o -name Rules.mk -o -name Config.mk -exec sed \
- -e 's/CFLAGS\(.*\)=\(.*\)-O3\(.*\)/CFLAGS\1=\2\3/' \
- -e 's/CFLAGS\(.*\)=\(.*\)-march=i686\(.*\)/CFLAGS\1=\2\3/' \
- -e 's/CFLAGS\(.*\)=\(.*\)-fomit-frame-pointer\(.*\)/CFLAGS\1=\2\3/' \
- -e 's/CFLAGS\(.*\)=\(.*\)-g3*\s\(.*\)/CFLAGS\1=\2 \3/' \
- -e 's/CFLAGS\(.*\)=\(.*\)-O2\(.*\)/CFLAGS\1=\2\3/' \
- -i {} \; || die "failed to re-set custom-cflags"
- fi
-
- # remove -Werror for gcc-4.6's sake
- find "${S}" -name 'Makefile*' -o -name '*.mk' -o -name 'common.make' | \
- xargs sed -i 's/ *-Werror */ /'
- # not strictly necessary to fix this
- sed -i 's/, "-Werror"//' "${S}/tools/python/setup.py" || die "failed to re-set setup.py"
-
- # Bug #575868 converted to a sed statement, typo of one char
- sed -e "s:granter’s:granter's:" -i xen/include/public/grant_table.h || die
-
- epatch_user
-}
-
-src_configure() {
- use arm && myopt="${myopt} CONFIG_EARLY_PRINTK=sun7i"
-
- use debug && myopt="${myopt} debug=y"
-
- if use custom-cflags; then
- filter-flags -fPIE -fstack-protector
- replace-flags -O3 -O2
- else
- unset CFLAGS
- unset LDFLAGS
- unset ASFLAGS
- fi
-}
-
-src_compile() {
- # Send raw LDFLAGS so that --as-needed works
- emake V=1 CC="$(tc-getCC)" LDFLAGS="$(raw-ldflags)" LD="$(tc-getLD)" -C xen ${myopt}
-}
-
-src_install() {
- local myopt
- use debug && myopt="${myopt} debug=y"
-
- # The 'make install' doesn't 'mkdir -p' the subdirs
- if use efi; then
- mkdir -p "${D}"${EFI_MOUNTPOINT}/efi/${EFI_VENDOR} || die
- fi
-
- emake LDFLAGS="$(raw-ldflags)" DESTDIR="${D}" -C xen ${myopt} install
-
- # make install likes to throw in some extra EFI bits if it built
- use efi || rm -rf "${D}/usr/$(get_libdir)/efi"
-}
-
-pkg_postinst() {
- elog "Official Xen Guide and the unoffical wiki page:"
- elog " https://wiki.gentoo.org/wiki/Xen"
- elog " http://en.gentoo-wiki.com/wiki/Xen/"
-
- use efi && einfo "The efi executable is installed in boot/efi/gentoo"
-
- elog "You can optionally block the installation of /boot/xen-syms by an entry"
- elog "in folder /etc/portage/env using the portage's feature INSTALL_MASK"
- elog "e.g. echo ${msg} > /etc/portage/env/xen.conf"
-}
diff --git a/app-emulation/xen/xen-4.7.3.ebuild b/app-emulation/xen/xen-4.7.3.ebuild
deleted file mode 100644
index c9c4f37aa171..000000000000
--- a/app-emulation/xen/xen-4.7.3.ebuild
+++ /dev/null
@@ -1,192 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-PYTHON_COMPAT=( python2_7 )
-
-inherit eutils multilib mount-boot flag-o-matic python-any-r1 toolchain-funcs
-
-MY_PV=${PV/_/-}
-MY_P=${PN}-${PV/_/-}
-
-if [[ $PV == *9999 ]]; then
- inherit git-r3
- KEYWORDS="amd64 x86"
- EGIT_REPO_URI="git://xenbits.xen.org/xen.git"
- SRC_URI=""
-else
- KEYWORDS="amd64 ~arm ~x86"
- UPSTREAM_VER=
- SECURITY_VER=
- GENTOO_VER=
-
- [[ -n ${UPSTREAM_VER} ]] && \
- UPSTREAM_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${P}-upstream-patches-${UPSTREAM_VER}.tar.xz"
- [[ -n ${SECURITY_VER} ]] && \
- SECURITY_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${PN}-security-patches-${SECURITY_VER}.tar.xz"
- [[ -n ${GENTOO_VER} ]] && \
- GENTOO_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${PN}-gentoo-patches-${GENTOO_VER}.tar.xz"
- SRC_URI="https://downloads.xenproject.org/release/xen/${MY_PV}/${MY_P}.tar.gz
- ${UPSTREAM_PATCHSET_URI}
- ${SECURITY_PATCHSET_URI}
- ${GENTOO_PATCHSET_URI}"
-fi
-
-DESCRIPTION="The Xen virtual machine monitor"
-HOMEPAGE="http://xen.org/"
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="custom-cflags debug efi flask"
-
-DEPEND="${PYTHON_DEPS}
- efi? ( >=sys-devel/binutils-2.22[multitarget] )
- !efi? ( >=sys-devel/binutils-2.22 )"
-RDEPEND=""
-PDEPEND="~app-emulation/xen-tools-${PV}"
-
-# no tests are available for the hypervisor
-# prevent the silliness of /usr/lib/debug/usr/lib/debug files
-# prevent stripping of the debug info from the /usr/lib/debug/xen-syms
-RESTRICT="test splitdebug strip"
-
-# Approved by QA team in bug #144032
-QA_WX_LOAD="boot/xen-syms-${PV}"
-
-REQUIRED_USE="arm? ( debug )"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
- python-any-r1_pkg_setup
- if [[ -z ${XEN_TARGET_ARCH} ]]; then
- if use amd64; then
- export XEN_TARGET_ARCH="x86_64"
- elif use arm; then
- export XEN_TARGET_ARCH="arm32"
- elif use arm64; then
- export XEN_TARGET_ARCH="arm64"
- else
- die "Unsupported architecture!"
- fi
- fi
-
- if use flask ; then
- export "XSM_ENABLE=y"
- export "FLASK_ENABLE=y"
- fi
-}
-
-src_prepare() {
- # Upstream's patchset
- if [[ -n ${UPSTREAM_VER} ]]; then
- EPATCH_SUFFIX="patch" \
- EPATCH_FORCE="yes" \
- EPATCH_OPTS="-p1" \
- epatch "${WORKDIR}"/patches-upstream
- fi
-
- # Security patchset
- if [[ -n ${SECURITY_VER} ]]; then
- einfo "Try to apply Xen Security patch set"
- # apply main xen patches
- # Two parallel systems, both work side by side
- # Over time they may concdense into one. This will suffice for now
- EPATCH_SUFFIX="patch"
- EPATCH_FORCE="yes"
-
- source "${WORKDIR}"/patches-security/${PV}.conf
-
- for i in ${XEN_SECURITY_MAIN}; do
- epatch "${WORKDIR}"/patches-security/xen/$i
- done
- fi
-
- # Gentoo's patchset
- if [[ -n ${GENTOO_VER} ]]; then
- EPATCH_SUFFIX="patch" \
- EPATCH_FORCE="yes" \
- epatch "${WORKDIR}"/patches-gentoo
- fi
-
- epatch "${FILESDIR}"/${PN}-4.6-efi.patch
-
- # Drop .config
- sed -e '/-include $(XEN_ROOT)\/.config/d' -i Config.mk || die "Couldn't drop"
-
- if use efi; then
- export EFI_VENDOR="gentoo"
- export EFI_MOUNTPOINT="boot"
- fi
-
- # if the user *really* wants to use their own custom-cflags, let them
- if use custom-cflags; then
- einfo "User wants their own CFLAGS - removing defaults"
- # try and remove all the default custom-cflags
- find "${S}" -name Makefile -o -name Rules.mk -o -name Config.mk -exec sed \
- -e 's/CFLAGS\(.*\)=\(.*\)-O3\(.*\)/CFLAGS\1=\2\3/' \
- -e 's/CFLAGS\(.*\)=\(.*\)-march=i686\(.*\)/CFLAGS\1=\2\3/' \
- -e 's/CFLAGS\(.*\)=\(.*\)-fomit-frame-pointer\(.*\)/CFLAGS\1=\2\3/' \
- -e 's/CFLAGS\(.*\)=\(.*\)-g3*\s\(.*\)/CFLAGS\1=\2 \3/' \
- -e 's/CFLAGS\(.*\)=\(.*\)-O2\(.*\)/CFLAGS\1=\2\3/' \
- -i {} \; || die "failed to re-set custom-cflags"
- fi
-
- # remove -Werror for gcc-4.6's sake
- find "${S}" -name 'Makefile*' -o -name '*.mk' -o -name 'common.make' | \
- xargs sed -i 's/ *-Werror */ /'
- # not strictly necessary to fix this
- sed -i 's/, "-Werror"//' "${S}/tools/python/setup.py" || die "failed to re-set setup.py"
-
- # Bug #575868 converted to a sed statement, typo of one char
- sed -e "s:granter’s:granter's:" -i xen/include/public/grant_table.h || die
-
- epatch_user
-}
-
-src_configure() {
- use arm && myopt="${myopt} CONFIG_EARLY_PRINTK=sun7i"
-
- use debug && myopt="${myopt} debug=y"
-
- if use custom-cflags; then
- filter-flags -fPIE -fstack-protector
- replace-flags -O3 -O2
- else
- unset CFLAGS
- unset LDFLAGS
- unset ASFLAGS
- fi
-}
-
-src_compile() {
- # Send raw LDFLAGS so that --as-needed works
- emake V=1 CC="$(tc-getCC)" LDFLAGS="$(raw-ldflags)" LD="$(tc-getLD)" -C xen ${myopt}
-}
-
-src_install() {
- local myopt
- use debug && myopt="${myopt} debug=y"
-
- # The 'make install' doesn't 'mkdir -p' the subdirs
- if use efi; then
- mkdir -p "${D}"${EFI_MOUNTPOINT}/efi/${EFI_VENDOR} || die
- fi
-
- emake LDFLAGS="$(raw-ldflags)" DESTDIR="${D}" -C xen ${myopt} install
-
- # make install likes to throw in some extra EFI bits if it built
- use efi || rm -rf "${D}/usr/$(get_libdir)/efi"
-}
-
-pkg_postinst() {
- elog "Official Xen Guide and the unoffical wiki page:"
- elog " https://wiki.gentoo.org/wiki/Xen"
- elog " http://en.gentoo-wiki.com/wiki/Xen/"
-
- use efi && einfo "The efi executable is installed in boot/efi/gentoo"
-
- elog "You can optionally block the installation of /boot/xen-syms by an entry"
- elog "in folder /etc/portage/env using the portage's feature INSTALL_MASK"
- elog "e.g. echo ${msg} > /etc/portage/env/xen.conf"
-}
diff --git a/app-emulation/xen/xen-4.8.2.ebuild b/app-emulation/xen/xen-4.8.2.ebuild
deleted file mode 100644
index 924c8cb2fb94..000000000000
--- a/app-emulation/xen/xen-4.8.2.ebuild
+++ /dev/null
@@ -1,192 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-PYTHON_COMPAT=( python2_7 )
-
-inherit eutils multilib mount-boot flag-o-matic python-any-r1 toolchain-funcs
-
-MY_PV=${PV/_/-}
-MY_P=${PN}-${PV/_/-}
-
-if [[ $PV == *9999 ]]; then
- inherit git-r3
- KEYWORDS=""
- EGIT_REPO_URI="git://xenbits.xen.org/xen.git"
- SRC_URI=""
-else
- KEYWORDS="~amd64 ~arm -x86"
- UPSTREAM_VER=0
- SECURITY_VER=
- GENTOO_VER=
-
- [[ -n ${UPSTREAM_VER} ]] && \
- UPSTREAM_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${P}-upstream-patches-${UPSTREAM_VER}.tar.xz"
- [[ -n ${SECURITY_VER} ]] && \
- SECURITY_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${PN}-security-patches-${SECURITY_VER}.tar.xz"
- [[ -n ${GENTOO_VER} ]] && \
- GENTOO_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${PN}-gentoo-patches-${GENTOO_VER}.tar.xz"
- SRC_URI="https://downloads.xenproject.org/release/xen/${MY_PV}/${MY_P}.tar.gz
- ${UPSTREAM_PATCHSET_URI}
- ${SECURITY_PATCHSET_URI}
- ${GENTOO_PATCHSET_URI}"
-fi
-
-DESCRIPTION="The Xen virtual machine monitor"
-HOMEPAGE="http://xen.org/"
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="custom-cflags debug efi flask"
-
-DEPEND="${PYTHON_DEPS}
- efi? ( >=sys-devel/binutils-2.22[multitarget] )
- !efi? ( >=sys-devel/binutils-2.22 )"
-RDEPEND=""
-PDEPEND="~app-emulation/xen-tools-${PV}"
-
-# no tests are available for the hypervisor
-# prevent the silliness of /usr/lib/debug/usr/lib/debug files
-# prevent stripping of the debug info from the /usr/lib/debug/xen-syms
-RESTRICT="test splitdebug strip"
-
-# Approved by QA team in bug #144032
-QA_WX_LOAD="boot/xen-syms-${PV}"
-
-REQUIRED_USE="arm? ( debug )"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
- python-any-r1_pkg_setup
- if [[ -z ${XEN_TARGET_ARCH} ]]; then
- if use amd64; then
- export XEN_TARGET_ARCH="x86_64"
- elif use arm; then
- export XEN_TARGET_ARCH="arm32"
- elif use arm64; then
- export XEN_TARGET_ARCH="arm64"
- else
- die "Unsupported architecture!"
- fi
- fi
-
- if use flask ; then
- export "XSM_ENABLE=y"
- export "FLASK_ENABLE=y"
- fi
-}
-
-src_prepare() {
- # Upstream's patchset
- if [[ -n ${UPSTREAM_VER} ]]; then
- EPATCH_SUFFIX="patch" \
- EPATCH_FORCE="yes" \
- EPATCH_OPTS="-p1" \
- epatch "${WORKDIR}"/patches-upstream
- fi
-
- # Security patchset
- if [[ -n ${SECURITY_VER} ]]; then
- einfo "Try to apply Xen Security patch set"
- # apply main xen patches
- # Two parallel systems, both work side by side
- # Over time they may concdense into one. This will suffice for now
- EPATCH_SUFFIX="patch"
- EPATCH_FORCE="yes"
-
- source "${WORKDIR}"/patches-security/${PV}.conf
-
- for i in ${XEN_SECURITY_MAIN}; do
- epatch "${WORKDIR}"/patches-security/xen/$i
- done
- fi
-
- # Gentoo's patchset
- if [[ -n ${GENTOO_VER} ]]; then
- EPATCH_SUFFIX="patch" \
- EPATCH_FORCE="yes" \
- epatch "${WORKDIR}"/patches-gentoo
- fi
-
- epatch "${FILESDIR}"/${PN}-4.6-efi.patch
-
- # Drop .config
- sed -e '/-include $(XEN_ROOT)\/.config/d' -i Config.mk || die "Couldn't drop"
-
- if use efi; then
- export EFI_VENDOR="gentoo"
- export EFI_MOUNTPOINT="boot"
- fi
-
- # if the user *really* wants to use their own custom-cflags, let them
- if use custom-cflags; then
- einfo "User wants their own CFLAGS - removing defaults"
- # try and remove all the default custom-cflags
- find "${S}" -name Makefile -o -name Rules.mk -o -name Config.mk -exec sed \
- -e 's/CFLAGS\(.*\)=\(.*\)-O3\(.*\)/CFLAGS\1=\2\3/' \
- -e 's/CFLAGS\(.*\)=\(.*\)-march=i686\(.*\)/CFLAGS\1=\2\3/' \
- -e 's/CFLAGS\(.*\)=\(.*\)-fomit-frame-pointer\(.*\)/CFLAGS\1=\2\3/' \
- -e 's/CFLAGS\(.*\)=\(.*\)-g3*\s\(.*\)/CFLAGS\1=\2 \3/' \
- -e 's/CFLAGS\(.*\)=\(.*\)-O2\(.*\)/CFLAGS\1=\2\3/' \
- -i {} \; || die "failed to re-set custom-cflags"
- fi
-
- # remove -Werror for gcc-4.6's sake
- find "${S}" -name 'Makefile*' -o -name '*.mk' -o -name 'common.make' | \
- xargs sed -i 's/ *-Werror */ /'
- # not strictly necessary to fix this
- sed -i 's/, "-Werror"//' "${S}/tools/python/setup.py" || die "failed to re-set setup.py"
-
- # Bug #575868 converted to a sed statement, typo of one char
- sed -e "s:granter’s:granter's:" -i xen/include/public/grant_table.h || die
-
- epatch_user
-}
-
-src_configure() {
- use arm && myopt="${myopt} CONFIG_EARLY_PRINTK=sun7i"
-
- use debug && myopt="${myopt} debug=y"
-
- if use custom-cflags; then
- filter-flags -fPIE -fstack-protector
- replace-flags -O3 -O2
- else
- unset CFLAGS
- unset LDFLAGS
- unset ASFLAGS
- fi
-}
-
-src_compile() {
- # Send raw LDFLAGS so that --as-needed works
- emake V=1 CC="$(tc-getCC)" LDFLAGS="$(raw-ldflags)" LD="$(tc-getLD)" -C xen ${myopt}
-}
-
-src_install() {
- local myopt
- use debug && myopt="${myopt} debug=y"
-
- # The 'make install' doesn't 'mkdir -p' the subdirs
- if use efi; then
- mkdir -p "${D}"${EFI_MOUNTPOINT}/efi/${EFI_VENDOR} || die
- fi
-
- emake LDFLAGS="$(raw-ldflags)" DESTDIR="${D}" -C xen ${myopt} install
-
- # make install likes to throw in some extra EFI bits if it built
- use efi || rm -rf "${D}/usr/$(get_libdir)/efi"
-}
-
-pkg_postinst() {
- elog "Official Xen Guide and the unoffical wiki page:"
- elog " https://wiki.gentoo.org/wiki/Xen"
- elog " http://en.gentoo-wiki.com/wiki/Xen/"
-
- use efi && einfo "The efi executable is installed in boot/efi/gentoo"
-
- elog "You can optionally block the installation of /boot/xen-syms by an entry"
- elog "in folder /etc/portage/env using the portage's feature INSTALL_MASK"
- elog "e.g. echo ${msg} > /etc/portage/env/xen.conf"
-}
diff --git a/app-emulation/xen/xen-4.8.2-r1.ebuild b/app-emulation/xen/xen-4.9.0.ebuild
index fe53cdc62719..b9ad6439bc4a 100644
--- a/app-emulation/xen/xen-4.8.2-r1.ebuild
+++ b/app-emulation/xen/xen-4.9.0.ebuild
@@ -12,12 +12,12 @@ MY_P=${PN}-${MY_PV}
if [[ $PV == *9999 ]]; then
inherit git-r3
- KEYWORDS="amd64"
+ KEYWORDS=""
EGIT_REPO_URI="git://xenbits.xen.org/xen.git"
SRC_URI=""
else
- KEYWORDS="amd64 ~arm -x86"
- UPSTREAM_VER=1
+ KEYWORDS="~amd64 ~arm -x86"
+ UPSTREAM_VER=0
SECURITY_VER=
GENTOO_VER=
@@ -34,7 +34,6 @@ else
fi
DESCRIPTION="The Xen virtual machine monitor"
-HOMEPAGE="http://xen.org/"
HOMEPAGE="https://www.xenproject.org"
LICENSE="GPL-2"
SLOT="0"
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 17:33:18 +0000