gentoo resync : 20.03.2022

5 files changed, 0 insertions, 727 deletions

diff --git a/sys-fs/cryptsetup/files/1.6.7-dmcrypt.confd b/sys-fs/cryptsetup/files/1.6.7-dmcrypt.confd
deleted file mode 100644
index 642ff087078b..000000000000
--- a/sys-fs/cryptsetup/files/1.6.7-dmcrypt.confd
+++ /dev/null
@@ -1,111 +0,0 @@
-# /etc/conf.d/dmcrypt
-
-# For people who run dmcrypt on top of some other layer (like raid),
-# use rc_need to specify that requirement.  See the runscript(8) man
-# page for more information.
-
-#--------------------
-# Instructions
-#--------------------
-
-# Note regarding the syntax of this file.  This file is *almost* bash,
-# but each line is evaluated separately.  Separate swaps/targets can be
-# specified.  The init-script which reads this file assumes that a
-# swap= or target= line starts a new section, similar to lilo or grub
-# configuration.
-
-# Note when using gpg keys and /usr on a separate partition, you will
-# have to copy /usr/bin/gpg to /bin/gpg so that it will work properly
-# and ensure that gpg has been compiled statically.
-# See http://bugs.gentoo.org/90482 for more information.
-
-# Note that the init-script which reads this file detects whether your
-# partition is LUKS or not. No mkfs is run unless you specify a makefs
-# option.
-
-# Global options:
-#----------------
-
-# How long to wait for each timeout (in seconds).
-dmcrypt_key_timeout=1
-
-# Max number of checks to perform (see dmcrypt_key_timeout).
-#dmcrypt_max_timeout=300
-
-# Number of password retries.
-dmcrypt_retries=5
-
-# Arguments:
-#-----------
-# target=<name>                      == Mapping name for partition.
-# swap=<name>                        == Mapping name for swap partition.
-# source='<dev>'                     == Real device for partition.
-#                                    Note: You can (and should) specify a tag like UUID
-#                                    for blkid (see -t option).  This is safer than using
-#                                    the full path to the device.
-# key='</path/to/keyfile>[:<mode>]'  == Fullpath from / or from inside removable media.
-# remdev='<dev>'                     == Device that will be assigned to removable media.
-# gpg_options='<opts>'               == Default are --quiet --decrypt
-# options='<opts>'                   == cryptsetup, for LUKS you can only use --readonly
-# loop_file='<file>'                 == Loopback file.
-#                                    Note: If you omit $source, then a free loopback will
-#                                    be looked up automatically.
-# pre_mount='cmds'                   == commands to execute before mounting partition.
-# post_mount='cmds'                  == commands to execute after mounting partition.
-#-----------
-# Supported Modes
-# gpg					== decrypt and pipe key into cryptsetup.
-#						Note: new-line character must not be part of key.
-#						Command to erase \n char: 'cat key | tr -d '\n' > cleanKey'
-
-#--------------------
-# dm-crypt examples
-#--------------------
-
-## swap
-# Swap partitions. These should come first so that no keys make their
-# way into unencrypted swap.
-# If no options are given, they will default to: -c aes -h sha1 -d /dev/urandom
-# If no makefs is given then mkswap will be assumed
-#swap=crypt-swap
-#source='/dev/hda2'
-
-## /home with passphrase
-#target=crypt-home
-#source='/dev/hda5'
-
-## /home with regular keyfile
-#target=crypt-home
-#source='/dev/hda5'
-#key='/full/path/to/homekey'
-
-## /home with gpg protected key
-#target=crypt-home
-#source='/dev/hda5'
-#key='/full/path/to/homekey:gpg'
-
-## /home with regular keyfile on removable media(such as usb-stick)
-#target=crypt-home
-#source='/dev/hda5'
-#key='/full/path/to/homekey'
-#remdev='/dev/sda1'
-
-## /home with gpg protected key on removable media(such as usb-stick)
-#target=crypt-home
-#source='/dev/hda5'
-#key='/full/path/to/homekey:gpg'
-#remdev='/dev/sda1'
-
-## /tmp with regular keyfile
-#target=crypt-tmp
-#source='/dev/hda6'
-#key='/full/path/to/tmpkey'
-#pre_mount='/sbin/mkreiserfs -f -f ${dev}'
-#post_mount='chown root:root ${mount_point}; chmod 1777 ${mount_point}'
-
-## Loopback file example
-#target='crypt-loop-home'
-#source='/dev/loop0'
-#loop_file='/mnt/crypt/home'
-
-# The file must be terminated by a newline.  Or leave this comment last.
diff --git a/sys-fs/cryptsetup/files/1.6.7-dmcrypt.rc b/sys-fs/cryptsetup/files/1.6.7-dmcrypt.rc
deleted file mode 100644
index cdd20ba929d4..000000000000
--- a/sys-fs/cryptsetup/files/1.6.7-dmcrypt.rc
+++ /dev/null
@@ -1,339 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-depend() {
-	before checkfs fsck
-
-	if grep -qs ^swap= "${conf_file}" ; then
-		before swap
-	fi
-}
-
-# We support multiple dmcrypt instances based on $SVCNAME
-conf_file="/etc/conf.d/${SVCNAME}"
-
-# Get splash helpers if available.
-if [ -e /sbin/splash-functions.sh ] ; then
-	. /sbin/splash-functions.sh
-fi
-
-# Setup mappings for an individual target/swap
-# Note: This relies on variables localized in the main body below.
-dm_crypt_execute() {
-	local dev ret mode foo
-
-	if [ -z "${target}" -a -z "${swap}" ] ; then
-		return
-	fi
-
-	# Set up default values.
-	: ${dmcrypt_key_timeout:=1}
-	: ${dmcrypt_max_timeout:=300}
-	: ${dmcrypt_retries:=5}
-
-	# Handle automatic look up of the source path.
-	if [ -z "${source}" -a -n "${loop_file}" ] ; then
-		source=$(losetup --show -f "${loop_file}")
-	fi
-	case ${source} in
-	*=*)
-		source=$(blkid -l -t "${source}" -o device)
-		;;
-	esac
-	if [ -z "${source}" ] || [ ! -e "${source}" ] ; then
-		ewarn "source \"${source}\" for ${target} missing, skipping..."
-		return
-	fi
-
-	if [ -n "${target}" ] ; then
-		# let user set options, otherwise leave empty
-		: ${options:=' '}
-	elif [ -n "${swap}" ] ; then
-		if cryptsetup isLuks ${source} 2>/dev/null ; then
-			ewarn "The swap you have defined is a LUKS partition. Aborting crypt-swap setup."
-			return
-		fi
-		target=${swap}
-		# swap contents do not need to be preserved between boots, luks not required.
-		# suspend2 users should have initramfs's init handling their swap partition either way.
-		: ${options:='-c aes -h sha1 -d /dev/urandom'}
-		: ${pre_mount:='mkswap ${dev}'}
-	fi
-
-	if [ -n "${loop_file}" ] ; then
-		dev="/dev/mapper/${target}"
-		ebegin "  Setting up loop device ${source}"
-		losetup ${source} ${loop_file}
-	fi
-
-	# cryptsetup:
-	# open   <device> <name>      # <device> is $source
-	# create <name>   <device>    # <name>   is $target
-	local arg1="create" arg2="${target}" arg3="${source}"
-	if cryptsetup isLuks ${source} 2>/dev/null ; then
-		arg1="open"
-		arg2="${source}"
-		arg3="${target}"
-	fi
-
-	# Older versions reported:
-	#	${target} is active:
-	# Newer versions report:
-	#	${target} is active[ and is in use.]
-	if cryptsetup status ${target} | egrep -q ' is active' ; then
-		einfo "dm-crypt mapping ${target} is already configured"
-		return
-	fi
-	splash svc_input_begin ${SVCNAME} >/dev/null 2>&1
-
-	# Handle keys
-	if [ -n "${key}" ] ; then
-		read_abort() {
-			# some colors
-			local ans savetty resettty
-			[ -z "${NORMAL}" ] && eval $(eval_ecolors)
-			einfon "  $1? (${WARN}yes${NORMAL}/${GOOD}No${NORMAL}) "
-			shift
-			# This is ugly as s**t.  But POSIX doesn't provide `read -t`, so
-			# we end up having to implement our own crap with stty/etc...
-			savetty=$(stty -g)
-			resettty='stty ${savetty}; trap - EXIT HUP INT TERM'
-			trap 'eval "${resettty}"' EXIT HUP INT TERM
-			stty -icanon
-			stty min 0 time "$(( $2 * 10 ))"
-			ans=$(dd count=1 bs=1 2>/dev/null) || ans=''
-			eval "${resettty}"
-			if [ -z "${ans}" ] ; then
-				printf '\r'
-			else
-				echo
-			fi
-			case ${ans} in
-				[yY]) return 0;;
-				*) return 1;;
-			esac
-		}
-
-		# Notes: sed not used to avoid case where /usr partition is encrypted.
-		mode=${key##*:} && ( [ "${mode}" = "${key}" ] || [ -z "${mode}" ] ) && mode=reg
-		key=${key%:*}
-		case "${mode}" in
-		gpg|reg)
-			# handle key on removable device
-			if [ -n "${remdev}" ] ; then
-				# temp directory to mount removable device
-				local mntrem="${RC_SVCDIR}/dm-crypt-remdev.$$"
-				if [ ! -d "${mntrem}" ] ; then
-					if ! mkdir -p "${mntrem}" ; then
-						ewarn "${source} will not be decrypted ..."
-						einfo "Reason: Unable to create temporary mount point '${mntrem}'"
-						return
-					fi
-				fi
-				i=0
-				einfo "Please insert removable device for ${target}"
-				while [ ${i} -lt ${dmcrypt_max_timeout} ] ; do
-					foo=""
-					if mount -n -o ro "${remdev}" "${mntrem}" 2>/dev/null >/dev/null ; then
-						# keyfile exists?
-						if [ ! -e "${mntrem}${key}" ] ; then
-							umount -n "${mntrem}"
-							rmdir "${mntrem}"
-							einfo "Cannot find ${key} on removable media."
-							read_abort "Abort" ${dmcrypt_key_timeout} && return
-						else
-							key="${mntrem}${key}"
-							break
-						fi
-					else
-						[ -e "${remdev}" ] \
-							&& foo="mount failed" \
-							|| foo="mount source not found"
-					fi
-					: $((i += 1))
-					read_abort "Stop waiting after $i attempts (${foo})" -t 1 && return
-				done
-			else    # keyfile ! on removable device
-				if [ ! -e "${key}" ] ; then
-					ewarn "${source} will not be decrypted ..."
-					einfo "Reason: keyfile ${key} does not exist."
-					return
-				fi
-			fi
-			;;
-		*)
-			ewarn "${source} will not be decrypted ..."
-			einfo "Reason: mode ${mode} is invalid."
-			return
-			;;
-		esac
-	else
-		mode=none
-	fi
-	ebegin "  ${target} using: ${options} ${arg1} ${arg2} ${arg3}"
-	if [ "${mode}" = "gpg" ] ; then
-		: ${gpg_options:='-q -d'}
-		# gpg available ?
-		if command -v gpg >/dev/null ; then
-			i=0
-			while [ ${i} -lt ${dmcrypt_retries} ] ; do
-				# paranoid, don't store key in a variable, pipe it so it stays very little in ram unprotected.
-				# save stdin stdout stderr "values"
-				timeout ${dmcrypt_max_timeout} gpg ${gpg_options} ${key} 2>/dev/null | \
-					cryptsetup --key-file - ${options} ${arg1} ${arg2} ${arg3}
-				ret=$?
-				# The timeout command exits 124 when it times out.
-				[ ${ret} -eq 0 -o ${ret} -eq 124 ] && break
-				: $(( i += 1 ))
-			done
-			eend ${ret} "failure running cryptsetup"
-		else
-			ewarn "${source} will not be decrypted ..."
-			einfo "Reason: cannot find gpg application."
-			einfo "You have to install app-crypt/gnupg first."
-			einfo "If you have /usr on its own partition, try copying gpg to /bin ."
-		fi
-	else
-		if [ "${mode}" = "reg" ] ; then
-			cryptsetup ${options} -d ${key} ${arg1} ${arg2} ${arg3}
-			ret=$?
-			eend ${ret} "failure running cryptsetup"
-		else
-			cryptsetup ${options} ${arg1} ${arg2} ${arg3}
-			ret=$?
-			eend ${ret} "failure running cryptsetup"
-		fi
-	fi
-	if [ -d "${mntrem}" ] ; then
-		umount -n ${mntrem} 2>/dev/null >/dev/null
-		rmdir ${mntrem} 2>/dev/null >/dev/null
-	fi
-	splash svc_input_end ${SVCNAME} >/dev/null 2>&1
-
-	if [ ${ret} -ne 0 ] ; then
-		cryptfs_status=1
-	else
-		if [ -n "${pre_mount}" ] ; then
-			dev="/dev/mapper/${target}"
-			eval ebegin \""    pre_mount: ${pre_mount}"\"
-			eval "${pre_mount}" > /dev/null
-			ewend $? || cryptfs_status=1
-		fi
-	fi
-}
-
-# Lookup optional bootparams
-get_bootparam_val() {
-	# We're given something like:
-	#    foo=bar=cow
-	# Return the "bar=cow" part.
-	case $1 in
-	*=*)
-		echo "${1#*=}"
-		;;
-	esac
-}
-
-start() {
-	local header=true cryptfs_status=0
-	local gpg_options key loop_file target targetline options pre_mount post_mount source swap remdev
-
-	local x
-	for x in $(cat /proc/cmdline) ; do
-		case "${x}" in
-		key_timeout=*)
-			dmcrypt_key_timeout=$(get_bootparam_val "${x}")
-			;;
-		esac
-	done
-
-	while read targetline <&3 ; do
-		case ${targetline} in
-		# skip comments and blank lines
-		""|"#"*) continue ;;
-		# skip service-specific openrc configs #377927
-		rc_*) continue ;;
-		esac
-
-		${header} && ebegin "Setting up dm-crypt mappings"
-		header=false
-
-		# check for the start of a new target/swap
-		case ${targetline} in
-		target=*|swap=*)
-			# If we have a target queued up, then execute it
-			dm_crypt_execute
-
-			# Prepare for the next target/swap by resetting variables
-			unset gpg_options key loop_file target options pre_mount post_mount source swap remdev
-			;;
-
-		gpg_options=*|remdev=*|key=*|loop_file=*|options=*|pre_mount=*|post_mount=*|source=*)
-			if [ -z "${target}${swap}" ] ; then
-				ewarn "Ignoring setting outside target/swap section: ${targetline}"
-				continue
-			fi
-			;;
-
-		dmcrypt_*=*)
-			# ignore global options
-			continue
-			;;
-
-		*)
-			ewarn "Skipping invalid line in ${conf_file}: ${targetline}"
-			;;
-		esac
-
-		# Queue this setting for the next call to dm_crypt_execute
-		eval "${targetline}"
-	done 3< ${conf_file}
-
-	# If we have a target queued up, then execute it
-	dm_crypt_execute
-
-	ewend ${cryptfs_status} "Failed to setup dm-crypt devices"
-}
-
-stop() {
-	local line header
-
-	# Break down all mappings
-	header=true
-	egrep "^(target|swap)=" ${conf_file} | \
-	while read line ; do
-		${header} && einfo "Removing dm-crypt mappings"
-		header=false
-
-		target= swap=
-		eval ${line}
-
-		[ -n "${swap}" ] && target=${swap}
-		if [ -z "${target}" ] ; then
-			ewarn "invalid line in ${conf_file}: ${line}"
-			continue
-		fi
-
-		ebegin "  ${target}"
-		cryptsetup remove ${target}
-		eend $?
-	done
-
-	# Break down loop devices
-	header=true
-	grep '^source=./dev/loop' ${conf_file} | \
-	while read line ; do
-		${header} && einfo "Detaching dm-crypt loop devices"
-		header=false
-
-		source=
-		eval ${line}
-
-		ebegin "  ${source}"
-		losetup -d "${source}"
-		eend $?
-	done
-
-	return 0
-}
diff --git a/sys-fs/cryptsetup/files/cryptsetup-2.0.4-fix-static-pwquality-build.patch b/sys-fs/cryptsetup/files/cryptsetup-2.0.4-fix-static-pwquality-build.patch
deleted file mode 100644
index 39524ec3114b..000000000000
--- a/sys-fs/cryptsetup/files/cryptsetup-2.0.4-fix-static-pwquality-build.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/src/Makemodule.am	2018-07-31 14:32:46.000000000 +0200
-+++ b/src/Makemodule.am	2018-08-12 17:13:26.000000000 +0200
-@@ -64,6 +64,7 @@
- 	$(veritysetup_LDADD)	\
- 	@CRYPTO_STATIC_LIBS@	\
- 	@DEVMAPPER_STATIC_LIBS@	\
-+	@PWQUALITY_STATIC_LIBS@ \
- 	@UUID_LIBS@
- endif
- endif
-@@ -93,6 +94,7 @@
- 	$(integritysetup_LDADD)	\
- 	@CRYPTO_STATIC_LIBS@	\
- 	@DEVMAPPER_STATIC_LIBS@	\
-+	@PWQUALITY_STATIC_LIBS@ \
- 	@UUID_LIBS@
- endif
- endif
diff --git a/sys-fs/cryptsetup/files/cryptsetup-2.4.1-external-tokens.patch b/sys-fs/cryptsetup/files/cryptsetup-2.4.1-external-tokens.patch
deleted file mode 100644
index 1777a02652ce..000000000000
--- a/sys-fs/cryptsetup/files/cryptsetup-2.4.1-external-tokens.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From a1b577c085cc9ef6b95c4556ec8815070828ee6c Mon Sep 17 00:00:00 2001
-From: Hector Martin <marcan@marcan.st>
-Date: Fri, 17 Sep 2021 05:44:18 +0000
-Subject: [PATCH] Do not attempt to unload external tokens if
- USE_EXTERNAL_TOKENS is disabled.
-
-This allows building a static binary as long as --disable-external-tokens is used
----
- lib/luks2/luks2_token.c | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/lib/luks2/luks2_token.c b/lib/luks2/luks2_token.c
-index d34cebf5..88d84418 100644
---- a/lib/luks2/luks2_token.c
-+++ b/lib/luks2/luks2_token.c
-@@ -245,6 +245,7 @@ int crypt_token_register(const crypt_token_handler *handler)
- 
- void crypt_token_unload_external_all(struct crypt_device *cd)
- {
-+#if USE_EXTERNAL_TOKENS
- 	int i;
- 
- 	for (i = LUKS2_TOKENS_MAX - 1; i >= 0; i--) {
-@@ -258,6 +259,7 @@ void crypt_token_unload_external_all(struct crypt_device *cd)
- 		if (dlclose(CONST_CAST(void *)token_handlers[i].u.v2.dlhandle))
- 			log_dbg(cd, "%s", dlerror());
- 	}
-+#endif
- }
- 
- static const void
--- 
-GitLab
-
diff --git a/sys-fs/cryptsetup/files/cryptsetup-2.4.1-fix-static-pwquality-build.patch b/sys-fs/cryptsetup/files/cryptsetup-2.4.1-fix-static-pwquality-build.patch
deleted file mode 100644
index f39e88507ffd..000000000000
--- a/sys-fs/cryptsetup/files/cryptsetup-2.4.1-fix-static-pwquality-build.patch
+++ /dev/null
@@ -1,225 +0,0 @@
-From 26cc1644b489578c76ec6f576614ca885c00a35d Mon Sep 17 00:00:00 2001
-From: Milan Broz <gmazyland@gmail.com>
-Date: Wed, 6 Oct 2021 12:27:25 +0200
-Subject: [PATCH 1/2] Do not link integritysetup and veritysetup with
- pwquality.
-
-These tools do not read passphrases, no need to link to these libraries.
-
-Just move the helper code that introduced this dependence as a side-effect.
-
-Fixes: #677
----
- src/Makemodule.am    |  6 -----
- src/utils_password.c | 56 --------------------------------------------
- src/utils_tools.c    | 56 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 56 insertions(+), 62 deletions(-)
-
-diff --git a/src/Makemodule.am b/src/Makemodule.am
-index a6dc50cf..f2b896bf 100644
---- a/src/Makemodule.am
-+++ b/src/Makemodule.am
-@@ -52,7 +52,6 @@ veritysetup_SOURCES =		\
- 	src/utils_arg_names.h	\
- 	src/utils_arg_macros.h	\
- 	src/utils_tools.c	\
--	src/utils_password.c	\
- 	src/veritysetup.c	\
- 	src/veritysetup_args.h	\
- 	src/veritysetup_arg_list.h	\
-@@ -61,8 +60,6 @@ veritysetup_SOURCES =		\
- veritysetup_LDADD = $(LDADD)	\
- 	libcryptsetup.la	\
- 	@POPT_LIBS@		\
--	@PWQUALITY_LIBS@	\
--	@PASSWDQC_LIBS@		\
- 	@BLKID_LIBS@
- 
- sbin_PROGRAMS += veritysetup
-@@ -91,7 +88,6 @@ integritysetup_SOURCES =	\
- 	src/utils_arg_names.h	\
- 	src/utils_arg_macros.h	\
- 	src/utils_tools.c	\
--	src/utils_password.c	\
- 	src/utils_blockdev.c	\
- 	src/integritysetup.c	\
- 	src/integritysetup_args.h \
-@@ -101,8 +97,6 @@ integritysetup_SOURCES =	\
- integritysetup_LDADD = $(LDADD)	\
- 	libcryptsetup.la	\
- 	@POPT_LIBS@		\
--	@PWQUALITY_LIBS@	\
--	@PASSWDQC_LIBS@		\
- 	@UUID_LIBS@		\
- 	@BLKID_LIBS@
- 
-diff --git a/src/utils_password.c b/src/utils_password.c
-index 58f3a7b3..65618b9c 100644
---- a/src/utils_password.c
-+++ b/src/utils_password.c
-@@ -318,59 +318,3 @@ void tools_passphrase_msg(int r)
- 	else if (r == -ENOENT)
- 		log_err(_("No usable keyslot is available."));
- }
--
--int tools_read_mk(const char *file, char **key, int keysize)
--{
--	int fd = -1, r = -EINVAL;
--
--	if (keysize <= 0 || !key)
--		return -EINVAL;
--
--	*key = crypt_safe_alloc(keysize);
--	if (!*key)
--		return -ENOMEM;
--
--	fd = open(file, O_RDONLY);
--	if (fd == -1) {
--		log_err(_("Cannot read keyfile %s."), file);
--		goto out;
--	}
--
--	if (read_buffer(fd, *key, keysize) != keysize) {
--		log_err(_("Cannot read %d bytes from keyfile %s."), keysize, file);
--		goto out;
--	}
--	r = 0;
--out:
--	if (fd != -1)
--		close(fd);
--
--	if (r) {
--		crypt_safe_free(*key);
--		*key = NULL;
--	}
--
--	return r;
--}
--
--int tools_write_mk(const char *file, const char *key, int keysize)
--{
--	int fd, r = -EINVAL;
--
--	if (keysize <= 0 || !key)
--		return -EINVAL;
--
--	fd = open(file, O_CREAT|O_EXCL|O_WRONLY, S_IRUSR);
--	if (fd < 0) {
--		log_err(_("Cannot open keyfile %s for write."), file);
--		return r;
--	}
--
--	if (write_buffer(fd, key, keysize) == keysize)
--		r = 0;
--	else
--		log_err(_("Cannot write to keyfile %s."), file);
--
--	close(fd);
--	return r;
--}
-diff --git a/src/utils_tools.c b/src/utils_tools.c
-index dbd83695..cf66e4c4 100644
---- a/src/utils_tools.c
-+++ b/src/utils_tools.c
-@@ -493,3 +493,59 @@ int tools_reencrypt_progress(uint64_t size, uint64_t offset, void *usrptr)
- 
- 	return r;
- }
-+
-+int tools_read_mk(const char *file, char **key, int keysize)
-+{
-+	int fd = -1, r = -EINVAL;
-+
-+	if (keysize <= 0 || !key)
-+		return -EINVAL;
-+
-+	*key = crypt_safe_alloc(keysize);
-+	if (!*key)
-+		return -ENOMEM;
-+
-+	fd = open(file, O_RDONLY);
-+	if (fd == -1) {
-+		log_err(_("Cannot read keyfile %s."), file);
-+		goto out;
-+	}
-+
-+	if (read_buffer(fd, *key, keysize) != keysize) {
-+		log_err(_("Cannot read %d bytes from keyfile %s."), keysize, file);
-+		goto out;
-+	}
-+	r = 0;
-+out:
-+	if (fd != -1)
-+		close(fd);
-+
-+	if (r) {
-+		crypt_safe_free(*key);
-+		*key = NULL;
-+	}
-+
-+	return r;
-+}
-+
-+int tools_write_mk(const char *file, const char *key, int keysize)
-+{
-+	int fd, r = -EINVAL;
-+
-+	if (keysize <= 0 || !key)
-+		return -EINVAL;
-+
-+	fd = open(file, O_CREAT|O_EXCL|O_WRONLY, S_IRUSR);
-+	if (fd < 0) {
-+		log_err(_("Cannot open keyfile %s for write."), file);
-+		return r;
-+	}
-+
-+	if (write_buffer(fd, key, keysize) == keysize)
-+		r = 0;
-+	else
-+		log_err(_("Cannot write to keyfile %s."), file);
-+
-+	close(fd);
-+	return r;
-+}
--- 
-GitLab
-
-
-From d20beacba060f34e3ab0d71d191f59434031e98f Mon Sep 17 00:00:00 2001
-From: Milan Broz <gmazyland@gmail.com>
-Date: Wed, 6 Oct 2021 12:45:20 +0200
-Subject: [PATCH 2/2] Remove redundant link to uuid lib for static build.
-
-Veritysetup does not need to link this library at all, for others
-we have link already in flags.
----
- src/Makemodule.am | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
-diff --git a/src/Makemodule.am b/src/Makemodule.am
-index f2b896bf..49e0c5aa 100644
---- a/src/Makemodule.am
-+++ b/src/Makemodule.am
-@@ -71,8 +71,7 @@ veritysetup_static_LDFLAGS = $(AM_LDFLAGS) -all-static
- veritysetup_static_LDADD =	\
- 	$(veritysetup_LDADD)	\
- 	@CRYPTO_STATIC_LIBS@	\
--	@DEVMAPPER_STATIC_LIBS@	\
--	@UUID_LIBS@
-+	@DEVMAPPER_STATIC_LIBS@
- endif
- endif
- 
-@@ -109,8 +108,7 @@ integritysetup_static_LDFLAGS = $(AM_LDFLAGS) -all-static
- integritysetup_static_LDADD =	\
- 	$(integritysetup_LDADD)	\
- 	@CRYPTO_STATIC_LIBS@	\
--	@DEVMAPPER_STATIC_LIBS@	\
--	@UUID_LIBS@
-+	@DEVMAPPER_STATIC_LIBS@
- endif
- endif
- 
--- 
-GitLab
-