gentoo resync : 13.09.2019

1 files changed, 0 insertions, 342 deletions

diff --git a/sys-apps/lm_sensors/files/lm_sensors-3.4.0-sensors-detect-gentoo.patch b/sys-apps/lm_sensors/files/lm_sensors-3.4.0-sensors-detect-gentoo.patch
deleted file mode 100644
index dd77d66c0855..000000000000
--- a/sys-apps/lm_sensors/files/lm_sensors-3.4.0-sensors-detect-gentoo.patch
+++ /dev/null
@@ -1,342 +0,0 @@
-From d8603c540cfccda5e011060083108de8f1b820ab Mon Sep 17 00:00:00 2001
-From: Thomas Deutschmann <whissi@gentoo.org>
-Date: Tue, 9 Aug 2016 01:19:16 +0200
-Subject: [PATCH 1/3] sensors-detect: Add sd_boot detection
-
-We need to know in write_config function wether the system is using systemd
-or not.
----
- prog/detect/sensors-detect | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
-diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect
-index 057cd96..e29ab4c 100755
---- a/prog/detect/sensors-detect
-+++ b/prog/detect/sensors-detect
-@@ -2746,7 +2746,7 @@ sub isa_read_i5d6
- # AUTODETECTION #
- #################
- 
--use vars qw($dev_i2c $sysfs_root $systemd_systemctl $systemd_system_dir);
-+use vars qw($dev_i2c $sysfs_root $systemd_is_booted $systemd_systemctl $systemd_system_dir);
- 
- sub initialize_conf
- {
-@@ -2820,6 +2820,10 @@ sub initialize_conf
- 	} elsif (-d "/lib/systemd/system") {
- 		$systemd_system_dir = "/lib/systemd/system";
- 	}
-+
-+	# Check whether the system was booted using systemd.
-+	# See: man sd_booted
-+	$systemd_is_booted = -d '/run/systemd/system';
- }
- 
- # [0] -> VERSION
--- 
-2.9.3
-
-
-From 14376e837c4a666fe2088bc7b7fbb90a4520f387 Mon Sep 17 00:00:00 2001
-From: Thomas Deutschmann <whissi@gentoo.org>
-Date: Tue, 9 Aug 2016 01:25:52 +0200
-Subject: [PATCH 2/3] sensors-detect: write_config function adjusted for Gentoo
- environment
-
-Bug: https://bugs.gentoo.org/480018
----
- prog/detect/sensors-detect | 133 +++++++++++++++++++++------------------------
- 1 file changed, 62 insertions(+), 71 deletions(-)
-
-diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect
-index e29ab4c..bb5ae0f 100755
---- a/prog/detect/sensors-detect
-+++ b/prog/detect/sensors-detect
-@@ -7079,6 +7079,9 @@ sub write_config
- {
- 	my ($configfile, $bus_modules, $hwmon_modules) = @_;
- 
-+	my $have_conffiles_created = 0;
-+
-+	# /etc/modprobe.d handling
- 	if (defined $configfile) {
- 		my $have_modprobe_d = -d '/etc/modprobe.d';
- 		printf "Do you want to \%s /etc/modprobe.d/lm_sensors.conf? (\%s): ",
-@@ -7087,96 +7090,84 @@ sub write_config
- 		$_ = read_answer();
- 		if (($have_modprobe_d and not m/^\s*n/i) or m/^\s*y/i) {
- 			unless ($have_modprobe_d) {
--				mkdir('/etc/modprobe.d', 0777)
-+				mkdir('/etc/modprobe.d', 0755)
- 					or die "Sorry, can't create /etc/modprobe.d ($!)";
- 			}
--			open(local *MODPROBE_D, ">/etc/modprobe.d/lm_sensors.conf")
-+			open(local *MODPROBE_D, ">", $have_modprobe_d . '/lm_sensors.conf')
- 				or die "Sorry, can't create /etc/modprobe.d/lm_sensors.conf ($!)";
- 			print MODPROBE_D "# Generated by sensors-detect on " . scalar localtime() . "\n";
- 			print MODPROBE_D $configfile;
- 			close(MODPROBE_D);
-+			$have_conffiles_created++;
- 		} else {
- 			print "To make the sensors modules behave correctly, add these lines to\n".
--			      "/etc/modprobe.conf:\n\n";
-+			      "/etc/modprobe.d/lm_sensors.conf:\n\n";
- 			print "#----cut here----\n".
- 			      $configfile.
- 			      "#----cut here----\n\n";
- 		}
- 	}
- 
--	my $have_sysconfig = -d '/etc/sysconfig';
--	printf "Do you want to \%s /etc/sysconfig/lm_sensors? (\%s): ",
--	       (-e '/etc/sysconfig/lm_sensors' ? 'overwrite' : 'generate'),
--	       ($have_sysconfig ? 'YES/no' : 'yes/NO');
--	$_ = read_answer();
--	if (($have_sysconfig and not m/^\s*n/i) or m/^\s*y/i) {
--		unless ($have_sysconfig) {
--			mkdir('/etc/sysconfig', 0777)
--				or die "Sorry, can't create /etc/sysconfig ($!)";
--		}
--		open(local *SYSCONFIG, ">/etc/sysconfig/lm_sensors")
--			or die "Sorry, can't create /etc/sysconfig/lm_sensors ($!)";
--		print SYSCONFIG "# Generated by sensors-detect on " . scalar localtime() . "\n";
--		print SYSCONFIG <<'EOT';
--# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
--# be loaded/unloaded.
--#
--# The format of this file is a shell script that simply defines variables:
--# HWMON_MODULES for hardware monitoring driver modules, and optionally
--# BUS_MODULES for any required bus driver module (for example for I2C or SPI).
--
--EOT
--		print SYSCONFIG "BUS_MODULES=\"", join(" ", @{$bus_modules}), "\"\n"
--			if @{$bus_modules};
--		print SYSCONFIG "HWMON_MODULES=\"", join(" ", @{$hwmon_modules}), "\"\n";
--		close(SYSCONFIG);
--
--		if ($systemd_systemctl && $systemd_system_dir) {
--			if (-f "$systemd_system_dir/lm_sensors.service") {
--				system($systemd_systemctl, "enable", "lm_sensors.service");
--				system($systemd_systemctl, "start", "lm_sensors.service");
--				# All done, don't check for /etc/init.d/lm_sensors
--			} else {
--				print "Copy prog/init/lm_sensors.service to $systemd_system_dir\n".
--				      "and run 'systemctl enable lm_sensors.service'\n".
--				      "for initialization at boot time.\n";
--			}
--			return;
-+	# /etc/modules-load.d handling
-+	my $modulesload_filedir = '/etc/modules-load.d';
-+	my $modulesload_file = $modulesload_filedir . '/lm_sensors.conf';
-+	my $modulesload_cfg = "# Generated by sensors-detect on " . scalar localtime() . "\n"
-+		. join("\n", (@{$bus_modules}, @{$hwmon_modules})) . "\n";
-+
-+	my $have_modulesload_file = -f $modulesload_file;
-+	printf "Do you want to \%s '$modulesload_file'? (\%s): ",
-+		($have_modulesload_file ? 'overwrite' : 'generate'),
-+		($have_modulesload_file ? 'yes/NO' : 'YES/no');
-+
-+	my $input = read_answer();
-+	chomp($input);
-+	if ($input eq '' && $have_modulesload_file) {
-+		$input = 'no';
-+	}
-+	elsif ($input eq '' && !$have_modulesload_file) {
-+		$input = 'yes';
-+	}
-+
-+	if ($input =~ m/^\s*y/i) {
-+		unless (-d $modulesload_filedir) {
-+			mkdir($modulesload_filedir, 0755)
-+				or die "Sorry, can't create '$modulesload_filedir' ($!)";
- 		}
- 
--		print "Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors\n".
--		      "for initialization at boot time.\n"
--			unless -f "/etc/init.d/lm_sensors";
-+		open(my $fh, '>', $modulesload_file)
-+			or die "Sorry, can't open '$modulesload_file' for writing! ($!)";
- 
--		if (-x "/sbin/insserv" && -f "/etc/init.d/lm_sensors") {
--			system("/sbin/insserv", "/etc/init.d/lm_sensors");
--		} elsif (-x "/sbin/chkconfig" && -f "/etc/init.d/lm_sensors") {
--			system("/sbin/chkconfig", "lm_sensors", "on");
--			if (-x "/sbin/service") {
--				system("/sbin/service", "lm_sensors", "start");
--			}
-+		print $fh $modulesload_cfg;
-+		close($fh);
-+
-+		$have_conffiles_created++;
-+	}
-+	else {
-+		print "\nPlease create '$modulesload_file' with the following content\n"
-+			. "to allow modules-load service to autoload modules on boot:\n\n";
-+		print "#----cut here----\n"
-+			. "# Generated by sensors-detect on " . scalar localtime() . "\n"
-+			. join("\n", (@{$bus_modules}, @{$hwmon_modules})) . "\n"
-+			. "#----cut here----\n\n";
-+	}
-+
-+	if ($have_conffiles_created) {
-+		printf "\nNote: You only have created the required configuration to autoload the\n"
-+			. "required modules to use your sensors on boot. If you want to start using\n"
-+			. "your sensors right now you have to either load them now once manually, to\n"
-+			. "reboot this system or to execute the following command(s):\n\n";
-+
-+		if ($systemd_is_booted) {
-+			print "  # systemctl restart systemd-modules-load\n\n"
- 		} else {
--			print "You should now start the lm_sensors service to load the required\n".
--			      "kernel modules.\n\n";
--		}
--	} else {
--		print "To load everything that is needed, add this to one of the system\n".
--		      "initialization scripts (e.g. /etc/rc.d/rc.local):\n\n";
--		print "#----cut here----\n";
--		if (@{$bus_modules}) {
--			print "# Adapter drivers\n";
--			print "modprobe $_\n" foreach (@{$bus_modules});
-+			print "  # /etc/init.d/modules-load restart\n\n"
- 		}
--		print "# Chip drivers\n";
--		print "modprobe $_\n" foreach (@{$hwmon_modules});
--		print((-e '/usr/bin/sensors' ?
--		       "/usr/bin/sensors -s\n" :
--		       "/usr/local/bin/sensors -s\n").
--		      "#----cut here----\n\n");
--
--		print "You really should try these commands right now to make sure everything\n".
--		      "is working properly. Monitoring programs won't work until the needed\n".
--		      "modules are loaded.\n\n";
-+	}
-+	else {
-+		print "\nNote: Please make sure the following modules are loaded when you\n"
-+			. "want to make use of your sensors:\n\n";
-+
-+		print "  " . join(" ", (@{$bus_modules}, @{$hwmon_modules})) . "\n\n";
- 	}
- }
- 
--- 
-2.9.3
-
-
-From 59680d1fd41402efb547ca75ad8397089df2e059 Mon Sep 17 00:00:00 2001
-From: Thomas Deutschmann <whissi@gentoo.org>
-Date: Mon, 29 Aug 2016 12:47:50 +0200
-Subject: [PATCH 3/3] sensors-detect: Add Gentoo config file protection
-
-Per default we don't modify live config file. Instead we create
-"._cfg0000_<filename>" files known from emerge when using CONFIG PROTECT.
-
-See CONFIGURATION FILES section of emerge(1) man page for details.
-
-Can be disabled using the "--no-gentoo-config-protect" parameter.
----
- prog/detect/sensors-detect | 51 +++++++++++++++++++++++++++++++++++++++++++---
- 1 file changed, 48 insertions(+), 3 deletions(-)
-
-diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect
-index bb5ae0f..2cc8f88 100755
---- a/prog/detect/sensors-detect
-+++ b/prog/detect/sensors-detect
-@@ -7093,7 +7093,7 @@ sub write_config
- 				mkdir('/etc/modprobe.d', 0755)
- 					or die "Sorry, can't create /etc/modprobe.d ($!)";
- 			}
--			open(local *MODPROBE_D, ">", $have_modprobe_d . '/lm_sensors.conf')
-+			open(local *MODPROBE_D, ">", gentoo_get_protected_file($have_modprobe_d . '/lm_sensors.conf'))
- 				or die "Sorry, can't create /etc/modprobe.d/lm_sensors.conf ($!)";
- 			print MODPROBE_D "# Generated by sensors-detect on " . scalar localtime() . "\n";
- 			print MODPROBE_D $configfile;
-@@ -7134,7 +7134,7 @@ sub write_config
- 				or die "Sorry, can't create '$modulesload_filedir' ($!)";
- 		}
- 
--		open(my $fh, '>', $modulesload_file)
-+		open(my $fh, '>', gentoo_get_protected_file($modulesload_file))
- 			or die "Sorry, can't open '$modulesload_file' for writing! ($!)";
- 
- 		print $fh $modulesload_cfg;
-@@ -7152,10 +7152,17 @@ sub write_config
- 	}
- 
- 	if ($have_conffiles_created) {
-+		if (!$opt{no_gentoo_config_protect}) {
-+			print "\n * IMPORTANT: At least $have_conffiles_created config file(s) in '/etc' need updating.\n"
-+				. " * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS\n"
-+				. " * sections of the emerge man page to learn how to update config files.\n";
-+		}
-+
- 		printf "\nNote: You only have created the required configuration to autoload the\n"
- 			. "required modules to use your sensors on boot. If you want to start using\n"
- 			. "your sensors right now you have to either load them now once manually, to\n"
--			. "reboot this system or to execute the following command(s):\n\n";
-+			. "reboot this system or to execute the following command(s)\%s:\n\n",
-+			($opt{no_gentoo_config_protect} ? "" : " _AFTER_\nyou have updated your config files");
- 
- 		if ($systemd_is_booted) {
- 			print "  # systemctl restart systemd-modules-load\n\n"
-@@ -7171,6 +7178,32 @@ sub write_config
- 	}
- }
- 
-+sub gentoo_get_protected_file
-+{
-+	my ($file) = @_;
-+
-+	if ($opt{no_gentoo_config_protect}) {
-+		return $file;
-+	}
-+
-+	my $basename = basename($file);
-+	my $dirname  = dirname($file);
-+
-+	my $protected_file;
-+	for (my $prot_num = 0; $prot_num <= 9999; $prot_num++) {
-+		$protected_file = sprintf('%s/._cfg%s_%s',
-+			$dirname,
-+			sprintf("%0*d", 4, $prot_num),
-+			$basename);
-+
-+		if (! -f $protected_file) {
-+			return $protected_file;
-+		}
-+	}
-+
-+	die "Running out of files -- cannot create protected file '$file'"
-+}
-+
- sub main
- {
- 	my ($input, $superio_features);
-@@ -7181,6 +7214,8 @@ sub main
- 			$opt{stat} = 1;
- 		} elsif ($ARGV[0] eq "--auto") {
- 			$opt{auto} = 1;
-+		} elsif ($ARGV[0] eq "--no-gentoo-config-protect") {
-+			$opt{no_gentoo_config_protect} = 1;
- 		} else {
- 			print STDERR "Error: unknown option $ARGV[0]\n";
- 			exit 1;
-@@ -7234,6 +7269,16 @@ sub main
- 		      "unless you know what you're doing.\n\n";
- 	}
- 
-+	if (!$opt{no_gentoo_config_protect}) {
-+		print "Gentoo config file protection is active. Every file this program will\n",
-+			"modify must be merged before the change will become active using\n",
-+			"default Gentoo tools such as dispatch-conf, cfg-update, and etc-update.\n\n";
-+	}
-+	else {
-+		print "Gentoo config file protection is _disabled_. This program will modify\n",
-+			"your active configuration without backups.\n\n";
-+	}
-+
- 	print "Some south bridges, CPUs or memory controllers contain embedded sensors.\n".
- 	      "Do you want to scan for them? This is totally safe. (YES/no): ";
- 	$input = read_answer();
--- 
-2.9.3
-