gentoo auto-resync : 19:09:2024 - 12:11:50

5 files changed, 307 insertions, 0 deletions

diff --git a/sci-libs/Manifest.gz b/sci-libs/Manifest.gz
index 4e0238ea671d..77eacd417465 100644
--- a/sci-libs/Manifest.gz
+++ b/sci-libs/Manifest.gz
diff --git a/sci-libs/linux-gpib/Manifest b/sci-libs/linux-gpib/Manifest
index bfd9e7a638c1..af10eefbd0b9 100644
--- a/sci-libs/linux-gpib/Manifest
+++ b/sci-libs/linux-gpib/Manifest
@@ -3,5 +3,6 @@ DIST gpib_firmware-2008-08-10.tar.gz 173004 BLAKE2B 05fcde09de5246b86004c263c733
 DIST linux-gpib-4.3.5.tar.gz 1462624 BLAKE2B fff30ed1a7abc18cd4317e8f8979ef4014a532baab8c014f9a2eaa3338a2e8e8b672214d3f2b3f44066be15f432861a3fe3d67652f6966e73e561d99ff1e1566 SHA512 018cc255922a6335f8d28418b0a0808c3a369506470d9c81432ac7183ae255217d938a419e10ba2b0c44205a9d901405ce00ad5bdd968db2721cedd83baa2f76
 DIST linux-gpib-4.3.6.tar.gz 1433121 BLAKE2B 64e2b19106d0531df990b1338f82a71707e54f448d652f6379eb9cd71feb84637090ed8fdfb0264248aa6879d5b9a1dc50e75c21a2c22a31397120eea5903e98 SHA512 a8005c71bfddb854ecbe4df0a81530e44378150242508b10df58c61d039c6d329020407608e31f1ef360de0c83169e76b793c032256e732d229bfd2da4cbaa35
 EBUILD linux-gpib-4.3.5.ebuild 4998 BLAKE2B 58df8bb468d2902ff2cfd10b5b1d70bdca6da62a5abae0e9d70e462de077667be0bd85236a6c97fb30c77b0f4f0eb1be8ffd8cae5c2ea64e82f6fda89168d698 SHA512 52f525242338765586e3a25ba39a830357d9717badb8be6202a0a37a5e4155daaaeaa8f4f5d33225ac5a1182586cbf7f6e9f7b9a268c00a2176fa801ed12451e
+EBUILD linux-gpib-4.3.6-r100.ebuild 5030 BLAKE2B c8413eab2fa8182d0eb143b284291dcc021344309f5d8e1968774bbb67db6c99247f9e2a282ee53ecb2efa7ee45f934fe59646a7883650321b6c46f24dc2e3a5 SHA512 29bb81d27ea873811be6bd2f8aed3f122ea91c0081a085f8b6e5698e4efabf1a490e57630b37e5c2d3e529e52fa39cbd2e403b47598f9e073b2da4e2169f341e
 EBUILD linux-gpib-4.3.6-r3.ebuild 5105 BLAKE2B 69d0c1d530c7520a105d35f70d53195346181e52a539c92be2ae93c27e930475c89c8ad619b67ab4e4d053189df2a8517f1724a08532d6e564e057e7aa118271 SHA512 9d227039921307f310ecc48ba83717fc73847069de4a6a3e9b114e133ef2bfa7405e9796a643c0682cfd0bc0fdbf52991b82c831147cb1c9fdeb4611e727c93f
 MISC metadata.xml 548 BLAKE2B c976143b910efb6a8920f064f35fdac9cb325ff272aca8a7644511300f4dfe9232c280577a90eae225ca4f88bc2b4cd09d175d4190bc13513d89457f57c9bb52 SHA512 c611a420ab28d623b5b9167bd59c04c2fe27404a7fd85de72a555f99ef8bad4383702482ae808d4eb66014a9e63ca057aa7195748f9c230f0778fcbde07fb71f
diff --git a/sci-libs/linux-gpib/linux-gpib-4.3.6-r100.ebuild b/sci-libs/linux-gpib/linux-gpib-4.3.6-r100.ebuild
new file mode 100644
index 000000000000..7950a9d28862
--- /dev/null
+++ b/sci-libs/linux-gpib/linux-gpib-4.3.6-r100.ebuild
@@ -0,0 +1,190 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+GUILE_COMPAT=( 2-2 3-0 )
+PYTHON_COMPAT=( python3_{10..12} )
+
+inherit readme.gentoo-r1 autotools guile-single perl-functions python-single-r1 udev
+
+# Check for latest firmware version on bump
+FW_PV="2008-08-10"
+
+DESCRIPTION="Driver library for GPIB (IEEE 488.2) hardware"
+HOMEPAGE="https://linux-gpib.sourceforge.io/"
+SRC_URI="https://downloads.sourceforge.net/linux-gpib/${P}.tar.gz
+	firmware? ( https://linux-gpib.sourceforge.io/firmware/gpib_firmware-${FW_PV}.tar.gz )
+"
+S="${WORKDIR}/${PN}-user-${PV}"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~arm ~x86"
+IUSE="pcmcia static guile perl php python tcl doc firmware"
+REQUIRED_USE="
+	guile? ( ${GUILE_REQUIRED_USE} )
+	python? ( ${PYTHON_REQUIRED_USE} )
+"
+
+COMMONDEPEND="
+	sys-libs/readline:=
+	tcl? ( dev-lang/tcl:0= )
+	guile? ( ${GUILE_DEPS} )
+	perl? ( dev-lang/perl:= )
+	php? ( dev-lang/php:= )
+	python? ( ${PYTHON_DEPS} )
+	firmware? ( sys-apps/fxload )
+"
+RDEPEND="${COMMONDEPEND}
+	acct-group/gpib
+	~sci-libs/linux-gpib-modules-${PV}
+"
+DEPEND="${COMMONDEPEND}"
+BDEPEND="
+	virtual/pkgconfig
+	doc? ( app-text/docbook-sgml-utils )
+"
+
+PATCHES=(
+	"${FILESDIR}"/${PN}-4.3.0-perl.patch
+)
+
+pkg_setup() {
+	use guile && guile-single_pkg_setup
+	use perl && perl_set_version
+	use python && python_setup
+}
+
+src_unpack() {
+	default
+	unpack "${WORKDIR}/${P}/${PN}-user-${PV}.tar.gz"
+}
+
+src_prepare() {
+	default
+
+	use guile && guile_bump_sources
+
+	# We have to use --root instead of --prefix for setup.py.
+	# Otherwise the python files are not installed properly into site-packages.
+	sed -i -e \
+		's/--prefix=$(DESTDIR)$(prefix)/--root=$(DESTDIR)/g' \
+		language/python/Makefile.am || die
+
+	eautoreconf
+}
+
+src_configure() {
+	econf \
+		$(use_enable static) \
+		$(use_enable guile guile-binding) \
+		$(use_enable perl perl-binding) \
+		$(use_enable php php-binding) \
+		$(use_enable python python-binding) \
+		$(use_enable tcl tcl-binding) \
+		$(use_enable doc documentation)
+}
+
+src_install() {
+	# PYTHONDONTWRITEBYTECODE=0 is required, otherwise
+	# installation of the python files is skipped
+	FIRM_DIR="${EPREFIX}"/usr/share/usb
+	emake \
+		DESTDIR="${ED}" \
+		INSTALL_MOD_PATH="${ED}" \
+		HOTPLUG_USB_CONF_DIR=/etc/hotplug/usb \
+		UDEV_RULES_DIR="$(get_udevdir)"/rules.d \
+		USB_FIRMWARE_DIR=${FIRM_DIR} \
+		PYTHONDONTWRITEBYTECODE=0 \
+		docdir="/usr/share/doc/${PF}/html" install
+
+	use guile && guile_unstrip_ccache
+
+	if use perl; then
+		einfo "Installing perl module"
+		cd "${S}"/language/perl || die
+		emake DESTDIR="${ED}" install
+		perl_fix_packlist
+		perl_delete_emptybsdir
+		cd "${S}" || die
+	fi
+
+	echo "KERNEL==\"gpib[0-9]*\",	MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules || die
+	udev_dorules 99-gpib.rules
+
+	dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS
+
+	insinto /etc
+	newins util/templates/gpib.conf gpib.conf
+	newins util/templates/gpib.conf gpib.conf.example
+
+	if use pcmcia; then
+		insinto /etc/pcmcia
+		doins "${S}"/etc/pcmcia/*
+	fi
+
+	# remove .la files
+	find "${ED}" -name '*.la' -delete || die
+
+	DOC_CONTENTS="
+As the udev rules were changed and refactored in this release it is
+necessary to remove any manually installed pre-4.3.0 gpib udev rules files
+in /etc/udev/rules.d/. The files to remove are:
+\n
+	99-agilent_82357a.rules\n
+	99-gpib-generic.rules\n
+	99-ni_usb_gpib.rules\n
+\n
+You need to run the 'gpib_config' utility to setup the driver before
+you can use it. In order to do it automatically you can add to your
+start script something like this (supposing the appropriate driver
+is loaded on the startup):
+\n
+		gpib_config --minor 0
+\n
+To give a user access to the computer's gpib board you will have to add
+them to the group 'gpib' or, you could change the permissions on the device
+files /dev/gpib[0-15] to something you like better, using 'chmod'
+\n
+Edit /etc/gpib.conf to match your interface board, and any devices you wish
+to open via ibfind().  See the documentation in /usr/share/linux-gpib/html for
+more information.
+\n
+"
+
+	if use pcmcia; then
+		DOC_CONTENTS+='
+For PCMCIA cards:\n
+All files needed for a PCMCIA board were copied to /etc/pcmcia.
+You may wish to edit the options passed to the gpib_config call in the
+/etc/pcmcia/linux-gpib-pcmcia script.
+You may need to send a SIGHUP signal to the cardmgr daemon to force it
+to reload the files in /etc/pcmcia \(alternatively you could use your
+pcmcia init.d script to restart the cardmgr, or you could just reboot\).
+The driver module will be loaded as needed by the cardmgr.
+
+'
+	fi
+
+	if use firmware; then
+		DOC_CONTENTS+='
+For Agilent \(HP\) 82341C and 82341D cards:
+The firmware for these boards is uploaded by passing the appropriate
+firmware file from /usr/share/linux-gpib/hp_82341 directory to
+gpib_config using the -I or --init-data command line option. Example:\n
+gpib_config --minor 0 --init-data /usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin
+'
+	fi
+
+	readme.gentoo_create_doc
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+	udev_reload
+}
+
+pkg_postrm() {
+	udev_reload
+}
diff --git a/sci-libs/nlopt/Manifest b/sci-libs/nlopt/Manifest
index c934bade1311..47c1eccd6664 100644
--- a/sci-libs/nlopt/Manifest
+++ b/sci-libs/nlopt/Manifest
@@ -1,4 +1,5 @@
 DIST nlopt-2.7.1.tar.gz 2044180 BLAKE2B 6d459f94a26ee6dd7f72c73c48992bd047150aa525bc4ad088c8516127afc5c7843f6fbb6726c2f845271b87934c13e0892a063362ab50df51f92e81979111fb SHA512 e23cb522fc696010574c14b72be85acc0f8ccf0bf208bf2b8789c57d6c5a6e6d419ee10330581518b1c1567018ae909b626ce7761d4fbd5bf112916871e420e2
 EBUILD nlopt-2.7.1-r1.ebuild 2158 BLAKE2B 88b1e4398b00988e964a7c5278a23eae12325464a8f8b89ad35b7bf69649d426b86ea14911a478ef96fd7f253cc09a90c080749e272f47a92a87443705edd084 SHA512 cdc065b3160bd91c75c5ebd90a34d6e8664ee615b275345935fe55ab217afdc4f3d1dc6953af8a202a19a560e0dadf692d8fff3dddcf1cd85953d503b511df18
+EBUILD nlopt-2.7.1-r100.ebuild 2302 BLAKE2B fbd71e1ab20ae0266cc2e3969f760f53365e521ee2a58c7e1bebc53d129f7b13d6d471642fe4a39b929e10f83266fdc3898465b2d6561729899bb59f0a2f84c3 SHA512 b3789c954b01fe71b9d8aa1a6b2a38dba5e2d57fea451e98c36acc97405127bd8d41a4bcdc48beaae0b1237667292507a319d1cc4b3fe1441ac65a57940a16cb
 EBUILD nlopt-2.7.1-r2.ebuild 2179 BLAKE2B e53e1ba5ce1a66366777a57a73343ff5a120e17a5ed553a2abda4a609ffa8b3d06336b22634405a5a6e0d1fef3e87af68938c8d475fd606dcbf6b7979e74659a SHA512 064c39c1e414d5267e294b2e2ece192b9b6d6e22f2fa8f2ca2f1a29d54bf5e0140b99e500074a5e2dad18fd74cd00ccede1e9d530a1d4bf7516d8d76fa3d3d85
 MISC metadata.xml 1203 BLAKE2B 305f090b1ca48c29668381d625cf3b6615e053fe25bdf66a0f15ca46069bc2e103a01bd0fbc6bd31788969b47e84316f00f7cf063b0d689c8b612ac5f97f63ea SHA512 c83b1388af4335dea54d8d227a044d9dcfc0389e7cd5204b502bda6c7a961601dfba8f828b1516d3c2576ea190a6384b9766997af1dc7ffa2a98353a26db1437
diff --git a/sci-libs/nlopt/nlopt-2.7.1-r100.ebuild b/sci-libs/nlopt/nlopt-2.7.1-r100.ebuild
new file mode 100644
index 000000000000..55bc5573894b
--- /dev/null
+++ b/sci-libs/nlopt/nlopt-2.7.1-r100.ebuild
@@ -0,0 +1,115 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+GUILE_COMPAT=( 2-2 3-0 )
+PYTHON_COMPAT=( python3_{10..12} )
+FORTRAN_NEEDED="test"
+
+inherit python-r1 cmake guile-single fortran-2
+
+DESCRIPTION="Non-linear optimization library"
+HOMEPAGE="https://github.com/stevengj/nlopt"
+SRC_URI="https://github.com/stevengj/nlopt/archive/v${PV}.tar.gz -> ${P}.tar.gz"
+
+LICENSE="LGPL-2.1 MIT"
+KEYWORDS="~amd64 ~arm64 ~ppc ~ppc64 ~riscv ~x86 ~amd64-linux ~x86-linux"
+SLOT="0"
+IUSE="cxx guile octave python test"
+REQUIRED_USE="guile? ( ${GUILE_REQUIRED_USE} ) python? ( ${PYTHON_REQUIRED_USE} )"
+RESTRICT="!test? ( test )"
+
+RDEPEND="
+	guile? ( ${GUILE_DEPS} )
+	octave? ( >=sci-mathematics/octave-6:= )
+	python? (
+		${PYTHON_DEPS}
+		dev-python/numpy[${PYTHON_USEDEP}]
+	)
+	"
+DEPEND="${RDEPEND}"
+BDEPEND="python? ( dev-lang/swig )"
+
+src_prepare() {
+	cmake_src_prepare
+
+	use guile && guile_bump_sources
+	use python && python_copy_sources
+}
+
+src_configure() {
+	# MATLAB detection causes problems (as in bug 826774) if we don't
+	# explicitly disable it.
+	local mycmakeargs=(
+		-DNLOPT_CXX=$(usex cxx)
+		-DNLOPT_FORTRAN=$(usex test)
+		-DNLOPT_GUILE=$(usex guile)
+		-DNLOPT_OCTAVE=$(usex octave)
+		-DNLOPT_MATLAB=OFF
+		-DNLOPT_PYTHON=OFF
+		-DNLOPT_SWIG=$(usex python)
+		-DNLOPT_TESTS=$(usex test)
+	)
+
+	cmake_src_configure
+
+	if use python; then
+		python_configure() {
+			local mycmakeargs=(
+				${mycmakeargs[@]}
+				-DNLOPT_PYTHON=ON
+				-DINSTALL_PYTHON_DIR="$(python_get_sitedir)"
+			)
+
+			cmake_src_configure
+		}
+
+		python_foreach_impl run_in_build_dir python_configure
+	fi
+}
+
+src_compile() {
+	cmake_src_compile
+
+	if use python; then
+		python_foreach_impl run_in_build_dir cmake_src_compile
+	fi
+}
+
+src_test() {
+	do_test() {
+		local a f
+		cd "${BUILD_DIR}"/test
+		for a in {1..$(usex cxx 9 7)}; do
+			for f in {5..9}; do
+				./testopt -a $a -o $f || die "algorithm $a function $f failed"
+			done
+		done
+	}
+
+	do_test
+
+	if use python; then
+		python_foreach_impl run_in_build_dir do_test
+	fi
+}
+
+nlopt_install() {
+	cmake_src_install
+	python_optimize
+}
+
+src_install() {
+	cmake_src_install
+
+	guile_unstrip_ccache
+	if use python; then
+		python_foreach_impl run_in_build_dir nlopt_install
+	fi
+
+	local r
+	for r in */README; do
+		newdoc ${r} README.$(dirname ${r})
+	done
+}