gentoo auto-resync : 01:12:2024 - 02:06:42

3 files changed, 0 insertions, 373 deletions

diff --git a/sci-libs/linux-gpib/Manifest b/sci-libs/linux-gpib/Manifest
index 2b3207817fb1..24df964eb3dd 100644
--- a/sci-libs/linux-gpib/Manifest
+++ b/sci-libs/linux-gpib/Manifest
@@ -1,8 +1,5 @@
 AUX linux-gpib-4.3.0-perl.patch 546 BLAKE2B 9695c1a9f48a2a8bcb5f5998c40eb909e6b1b3624defe87a08bc4b91b34f53e8176531678dff3d4810b0b85b811eb477795c0dffe0275b864c0e4d4bac9b0ea9 SHA512 21bf64366d4b68dcfc2f4fa932480f8ff6af62bf792fe90c0dd0330606c3b95c073040dfa87bd1e277391a02ad324612d58b6d618d83c637b3df60c638289d06
 DIST gpib_firmware-2008-08-10.tar.gz 173004 BLAKE2B 05fcde09de5246b86004c263c733d64316511bdb0b84dfbd9b94cb78e2909c0d191ff21ee0d77e7f0947e9231bd4cd62d6348e8f9beefd6d201b473732ff23d2 SHA512 f2a0ee3316b75ac36ed88568e45ca4c69935a6d10783c65582003ab39686f2a69d3002901866065f4f5efa9fdd4c779e038d1d7ce24bba266a619c164d5ac10d
-DIST linux-gpib-4.3.5.tar.gz 1462624 BLAKE2B fff30ed1a7abc18cd4317e8f8979ef4014a532baab8c014f9a2eaa3338a2e8e8b672214d3f2b3f44066be15f432861a3fe3d67652f6966e73e561d99ff1e1566 SHA512 018cc255922a6335f8d28418b0a0808c3a369506470d9c81432ac7183ae255217d938a419e10ba2b0c44205a9d901405ce00ad5bdd968db2721cedd83baa2f76
 DIST linux-gpib-4.3.6.tar.gz 1433121 BLAKE2B 64e2b19106d0531df990b1338f82a71707e54f448d652f6379eb9cd71feb84637090ed8fdfb0264248aa6879d5b9a1dc50e75c21a2c22a31397120eea5903e98 SHA512 a8005c71bfddb854ecbe4df0a81530e44378150242508b10df58c61d039c6d329020407608e31f1ef360de0c83169e76b793c032256e732d229bfd2da4cbaa35
-EBUILD linux-gpib-4.3.5.ebuild 4998 BLAKE2B 58df8bb468d2902ff2cfd10b5b1d70bdca6da62a5abae0e9d70e462de077667be0bd85236a6c97fb30c77b0f4f0eb1be8ffd8cae5c2ea64e82f6fda89168d698 SHA512 52f525242338765586e3a25ba39a830357d9717badb8be6202a0a37a5e4155daaaeaa8f4f5d33225ac5a1182586cbf7f6e9f7b9a268c00a2176fa801ed12451e
 EBUILD linux-gpib-4.3.6-r100.ebuild 5029 BLAKE2B 23cc0f14adb5db702da20076172422640b9e6f99115a27a0a17d8528fac14c69588e31202ca765ec8b237bbd27fa6110349f3bb3f2284459040f37c12988bf4e SHA512 e0eefdaeec929db676c26982bb884cd85e58b8a121f4f80c1ea202f65afeb9c173d71dbeadb86b4c5c4abd38ff680df4d4c79c3bca4088d501f6c538eab99769
-EBUILD linux-gpib-4.3.6-r3.ebuild 5105 BLAKE2B 69d0c1d530c7520a105d35f70d53195346181e52a539c92be2ae93c27e930475c89c8ad619b67ab4e4d053189df2a8517f1724a08532d6e564e057e7aa118271 SHA512 9d227039921307f310ecc48ba83717fc73847069de4a6a3e9b114e133ef2bfa7405e9796a643c0682cfd0bc0fdbf52991b82c831147cb1c9fdeb4611e727c93f
 MISC metadata.xml 548 BLAKE2B c976143b910efb6a8920f064f35fdac9cb325ff272aca8a7644511300f4dfe9232c280577a90eae225ca4f88bc2b4cd09d175d4190bc13513d89457f57c9bb52 SHA512 c611a420ab28d623b5b9167bd59c04c2fe27404a7fd85de72a555f99ef8bad4383702482ae808d4eb66014a9e63ca057aa7195748f9c230f0778fcbde07fb71f
diff --git a/sci-libs/linux-gpib/linux-gpib-4.3.5.ebuild b/sci-libs/linux-gpib/linux-gpib-4.3.5.ebuild
deleted file mode 100644
index ec3f2baf9002..000000000000
--- a/sci-libs/linux-gpib/linux-gpib-4.3.5.ebuild
+++ /dev/null
@@ -1,181 +0,0 @@
-# Copyright 1999-2024 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-PYTHON_COMPAT=( python3_{10..11} )
-
-inherit readme.gentoo-r1 autotools perl-functions python-single-r1 udev
-
-# Check for latest firmware version on bump
-FW_PV="2008-08-10"
-
-DESCRIPTION="Driver library for GPIB (IEEE 488.2) hardware"
-HOMEPAGE="https://linux-gpib.sourceforge.io/"
-SRC_URI="https://downloads.sourceforge.net/linux-gpib/${P}.tar.gz
-	firmware? ( https://linux-gpib.sourceforge.io/firmware/gpib_firmware-${FW_PV}.tar.gz )
-"
-S="${WORKDIR}/${PN}-user-${PV}"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~arm ~x86"
-IUSE="pcmcia static guile perl php python tcl doc firmware"
-REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )"
-
-COMMONDEPEND="
-	sys-libs/readline:=
-	tcl? ( dev-lang/tcl:0= )
-	guile? ( dev-scheme/guile:12 )
-	perl? ( dev-lang/perl:= )
-	php? ( dev-lang/php:= )
-	python? ( ${PYTHON_DEPS} )
-	firmware? ( sys-apps/fxload )
-"
-RDEPEND="${COMMONDEPEND}
-	acct-group/gpib
-	~sci-libs/linux-gpib-modules-${PV}
-"
-DEPEND="${COMMONDEPEND}"
-BDEPEND="
-	virtual/pkgconfig
-	doc? ( app-text/docbook-sgml-utils )
-	perl? ( virtual/perl-ExtUtils-MakeMaker )
-"
-
-PATCHES=(
-	"${FILESDIR}"/${PN}-4.3.0-perl.patch
-)
-
-pkg_setup() {
-	use perl && perl_set_version
-	use python && python_setup
-}
-
-src_unpack() {
-	default
-	unpack "${WORKDIR}/${P}/${PN}-user-${PV}.tar.gz"
-}
-
-src_prepare() {
-	default
-
-	# We have to use --root instead of --prefix for setup.py.
-	# Otherwise the python files are not installed properly into site-packages.
-	sed -i -e \
-		's/--prefix=$(DESTDIR)$(prefix)/--root=$(DESTDIR)/g' \
-		language/python/Makefile.am || die
-
-	eautoreconf
-}
-
-src_configure() {
-	econf \
-		$(use_enable static) \
-		$(use_enable guile guile-binding) \
-		$(use_enable perl perl-binding) \
-		$(use_enable php php-binding) \
-		$(use_enable python python-binding) \
-		$(use_enable tcl tcl-binding) \
-		$(use_enable doc documentation)
-}
-
-src_install() {
-	# PYTHONDONTWRITEBYTECODE=0 is required, otherwise
-	# installation of the python files is skipped
-	FIRM_DIR=/usr/share/usb
-	emake \
-		DESTDIR="${ED}" \
-		INSTALL_MOD_PATH="${ED}" \
-		HOTPLUG_USB_CONF_DIR=/etc/hotplug/usb \
-		UDEV_RULES_DIR="$(get_udevdir)"/rules.d \
-		USB_FIRMWARE_DIR=${FIRM_DIR} \
-		PYTHONDONTWRITEBYTECODE=0 \
-		docdir="/usr/share/doc/${PF}/html" install
-
-	if use perl; then
-		einfo "Installing perl module"
-		cd "${S}"/language/perl || die
-		emake DESTDIR="${ED}" install
-		perl_fix_packlist
-		perl_delete_emptybsdir
-		cd "${S}" || die
-	fi
-
-	echo "KERNEL==\"gpib[0-9]*\",	MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules
-	udev_dorules 99-gpib.rules
-
-	dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS
-
-	insinto /etc
-	newins util/templates/gpib.conf gpib.conf
-	newins util/templates/gpib.conf gpib.conf.example
-
-	if use pcmcia; then
-		insinto /etc/pcmcia
-		doins "${S}"/etc/pcmcia/*
-	fi
-
-	# fix rules files
-	local f
-	find "${ED}$(get_udevdir)"/rules.d -type f -print0 | while read -rd '' f ; do
-		grep -q "${ED}" "${f}" && einfo "File ${f} contains a temporary path, fixing."
-		sed -i -e "s:${ED}:/:g" "${f}"
-	done
-
-	DOC_CONTENTS="
-As the udev rules were changed and refactored in this release it is
-necessary to remove any manually installed pre-4.3.0 gpib udev rules files
-in /etc/udev/rules.d/. The files to remove are:
-\n
-	99-agilent_82357a.rules\n
-	99-gpib-generic.rules\n
-	99-ni_usb_gpib.rules\n
-\n
-You need to run the 'gpib_config' utility to setup the driver before
-you can use it. In order to do it automatically you can add to your
-start script something like this (supposing the appropriate driver
-is loaded on the startup):
-\n
-		gpib_config --minor 0
-\n
-To give a user access to the computer's gpib board you will have to add
-them to the group 'gpib' or, you could change the permissions on the device
-files /dev/gpib[0-15] to something you like better, using 'chmod'
-\n
-Edit /etc/gpib.conf to match your interface board, and any devices you wish
-to open via ibfind().  See the documentation in /usr/share/linux-gpib/html for
-more information.
-\n
-"
-
-	if use pcmcia; then
-		DOC_CONTENTS+='
-For PCMCIA cards:\n
-All files needed for a PCMCIA board were copied to /etc/pcmcia.
-You may wish to edit the options passed to the gpib_config call in the
-/etc/pcmcia/linux-gpib-pcmcia script.
-You may need to send a SIGHUP signal to the cardmgr daemon to force it
-to reload the files in /etc/pcmcia \(alternatively you could use your
-pcmcia init.d script to restart the cardmgr, or you could just reboot\).
-The driver module will be loaded as needed by the cardmgr.
-
-'
-	fi
-
-	if use firmware; then
-		DOC_CONTENTS+='
-For Agilent \(HP\) 82341C and 82341D cards:
-The firmware for these boards is uploaded by passing the appropriate
-firmware file from /usr/share/linux-gpib/hp_82341 directory to
-gpib_config using the -I or --init-data command line option. Example:\n
-gpib_config --minor 0 --init-data /usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin
-'
-	fi
-
-	readme.gentoo_create_doc
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-}
diff --git a/sci-libs/linux-gpib/linux-gpib-4.3.6-r3.ebuild b/sci-libs/linux-gpib/linux-gpib-4.3.6-r3.ebuild
deleted file mode 100644
index d42907d639c7..000000000000
--- a/sci-libs/linux-gpib/linux-gpib-4.3.6-r3.ebuild
+++ /dev/null
@@ -1,189 +0,0 @@
-# Copyright 1999-2024 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-PYTHON_COMPAT=( python3_{10..12} )
-
-inherit readme.gentoo-r1 autotools perl-functions python-single-r1 udev
-
-# Check for latest firmware version on bump
-FW_PV="2008-08-10"
-
-DESCRIPTION="Driver library for GPIB (IEEE 488.2) hardware"
-HOMEPAGE="https://linux-gpib.sourceforge.io/"
-SRC_URI="https://downloads.sourceforge.net/linux-gpib/${P}.tar.gz
-	firmware? ( https://linux-gpib.sourceforge.io/firmware/gpib_firmware-${FW_PV}.tar.gz )
-"
-S="${WORKDIR}/${PN}-user-${PV}"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~arm ~x86"
-IUSE="pcmcia static guile perl php python tcl doc firmware"
-REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )"
-
-COMMONDEPEND="
-	sys-libs/readline:=
-	tcl? ( dev-lang/tcl:0= )
-	guile? ( dev-scheme/guile:12 )
-	perl? ( dev-lang/perl:= )
-	php? ( dev-lang/php:= )
-	python? ( ${PYTHON_DEPS} )
-	firmware? ( sys-apps/fxload )
-"
-RDEPEND="${COMMONDEPEND}
-	acct-group/gpib
-	~sci-libs/linux-gpib-modules-${PV}
-"
-DEPEND="${COMMONDEPEND}"
-BDEPEND="
-	virtual/pkgconfig
-	doc? ( app-text/docbook-sgml-utils )
-	perl? ( virtual/perl-ExtUtils-MakeMaker )
-"
-
-PATCHES=(
-	"${FILESDIR}"/${PN}-4.3.0-perl.patch
-)
-
-pkg_setup() {
-	use perl && perl_set_version
-	use python && python_setup
-}
-
-src_unpack() {
-	default
-	unpack "${WORKDIR}/${P}/${PN}-user-${PV}.tar.gz"
-}
-
-src_prepare() {
-	default
-
-	# We have to use --root instead of --prefix for setup.py.
-	# Otherwise the python files are not installed properly into site-packages.
-	sed -i -e \
-		's/--prefix=$(DESTDIR)$(prefix)/--root=$(DESTDIR)/g' \
-		language/python/Makefile.am || die
-
-	eautoreconf
-}
-
-src_configure() {
-	econf \
-		$(use_enable static) \
-		$(use_enable guile guile-binding) \
-		$(use_enable perl perl-binding) \
-		$(use_enable php php-binding) \
-		$(use_enable python python-binding) \
-		$(use_enable tcl tcl-binding) \
-		$(use_enable doc documentation)
-}
-
-src_install() {
-	# PYTHONDONTWRITEBYTECODE=0 is required, otherwise
-	# installation of the python files is skipped
-	FIRM_DIR=/usr/share/usb
-	emake \
-		DESTDIR="${ED}" \
-		INSTALL_MOD_PATH="${ED}" \
-		HOTPLUG_USB_CONF_DIR=/etc/hotplug/usb \
-		UDEV_RULES_DIR="$(get_udevdir)"/rules.d \
-		USB_FIRMWARE_DIR=${FIRM_DIR} \
-		PYTHONDONTWRITEBYTECODE=0 \
-		docdir="/usr/share/doc/${PF}/html" install
-
-	if use perl; then
-		einfo "Installing perl module"
-		cd "${S}"/language/perl || die
-		emake DESTDIR="${ED}" install
-		perl_fix_packlist
-		perl_delete_emptybsdir
-		cd "${S}" || die
-	fi
-
-	echo "KERNEL==\"gpib[0-9]*\",	MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules
-	udev_dorules 99-gpib.rules
-
-	dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS
-
-	insinto /etc
-	newins util/templates/gpib.conf gpib.conf
-	newins util/templates/gpib.conf gpib.conf.example
-
-	if use pcmcia; then
-		insinto /etc/pcmcia
-		doins "${S}"/etc/pcmcia/*
-	fi
-
-	# fix rules files
-	local f
-	find "${ED}$(get_udevdir)"/rules.d -type f -print0 | while read -rd '' f ; do
-		grep -q "${ED}" "${f}" && einfo "File ${f} contains a temporary path, fixing."
-		sed -i -e "s:${ED}:/:g" "${f}"
-	done
-
-	# remove .la files
-	find "${ED}" -name '*.la' -delete || die
-
-	DOC_CONTENTS="
-As the udev rules were changed and refactored in this release it is
-necessary to remove any manually installed pre-4.3.0 gpib udev rules files
-in /etc/udev/rules.d/. The files to remove are:
-\n
-	99-agilent_82357a.rules\n
-	99-gpib-generic.rules\n
-	99-ni_usb_gpib.rules\n
-\n
-You need to run the 'gpib_config' utility to setup the driver before
-you can use it. In order to do it automatically you can add to your
-start script something like this (supposing the appropriate driver
-is loaded on the startup):
-\n
-		gpib_config --minor 0
-\n
-To give a user access to the computer's gpib board you will have to add
-them to the group 'gpib' or, you could change the permissions on the device
-files /dev/gpib[0-15] to something you like better, using 'chmod'
-\n
-Edit /etc/gpib.conf to match your interface board, and any devices you wish
-to open via ibfind().  See the documentation in /usr/share/linux-gpib/html for
-more information.
-\n
-"
-
-	if use pcmcia; then
-		DOC_CONTENTS+='
-For PCMCIA cards:\n
-All files needed for a PCMCIA board were copied to /etc/pcmcia.
-You may wish to edit the options passed to the gpib_config call in the
-/etc/pcmcia/linux-gpib-pcmcia script.
-You may need to send a SIGHUP signal to the cardmgr daemon to force it
-to reload the files in /etc/pcmcia \(alternatively you could use your
-pcmcia init.d script to restart the cardmgr, or you could just reboot\).
-The driver module will be loaded as needed by the cardmgr.
-
-'
-	fi
-
-	if use firmware; then
-		DOC_CONTENTS+='
-For Agilent \(HP\) 82341C and 82341D cards:
-The firmware for these boards is uploaded by passing the appropriate
-firmware file from /usr/share/linux-gpib/hp_82341 directory to
-gpib_config using the -I or --init-data command line option. Example:\n
-gpib_config --minor 0 --init-data /usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin
-'
-	fi
-
-	readme.gentoo_create_doc
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-	udev_reload
-}
-
-pkg_postrm() {
-	udev_reload
-}