gentoo resync : 29.10.2017

2 files changed, 0 insertions, 218 deletions

diff --git a/net-wireless/hostapd/Manifest b/net-wireless/hostapd/Manifest
index 9a9f7efd7815..3f0ab43bf71d 100644
--- a/net-wireless/hostapd/Manifest
+++ b/net-wireless/hostapd/Manifest
@@ -10,7 +10,6 @@ AUX hostapd-init.d 739 SHA256 3678565083106e698ca30c305c4561152a2b043fe894b8b773
 AUX hostapd.service 213 SHA256 16f0612c192fb5d7e7de716f25fdfc2ccecc35a00ff745ae67e02d7292558d8f SHA512 4d1a1619c49ad0272f360d2c9d79f2fd30503786fe8f22dd3fc4abcc39176029fe907c79d22f168c100b0d7b4ac969b5f4b5815d5ebe6805db5881dda69eef29 WHIRLPOOL 3e415fa8068aa429cb37c7957d396d5e261b5843ae06eb81370728be36573e59e90707c7047b336eb82562e98017608e712ceb28afe2bae385b2821e1cdbd856
 DIST hostapd-2.6.tar.gz 1822341 SHA256 01526b90c1d23bec4b0f052039cc4456c2fd19347b4d830d1d58a0a6aea7117d SHA512 e60baaa092786250b8de9935f5417c7626f5d749210cce9f83d776b65c19fc92a8141f41923389f05c16295d482a15ae8d8b744f4667425040c99e3c2f5b1bda WHIRLPOOL fa093c371a66f3aa834d44060330259dc20e3a1937ffacc4450c5c645291c2bd4b31bbe1827f7d27bfca724c5e26f53ea59f2e3aa69a4c87177212bb491b119a
 EBUILD hostapd-2.6-r1.ebuild 6385 SHA256 877d3d7ae0db1a37d581b763e6ec66a2fa45b129c23dc7613d4902e7cdc71704 SHA512 bae75fa20068a5b6e4458d36e4b931bfd467775fa782c630f2a6c9940b16faa0dc0df90ff43f23851b50fd4cb4ae5c560764703afe33c69190af6883796a1461 WHIRLPOOL e0c2826ce75abe4ac3ff9c6786831ccf718fdeb0c9a1d58bcae8ca7a28a48d3f991ff01f5e97a5152e4fd5086e23b2cea2618d428a097cb461e1eef49235a66e
-EBUILD hostapd-2.6.ebuild 5605 SHA256 16afa0cfed68e19f323fad2fbe0936941a236124061a4497de1cfc670c8e5faf SHA512 d73ae79008ed99fa3bac557b43aedda6a8ae225998f3c6820668cc22585bf5efaa66a6c6674244a1656cf5639cf4edf6dc46ca8f787908253dd5fe0ff2271fc5 WHIRLPOOL cfec9547b3d6df34449ccad13cf8e380587c9375c9ebee18589e317603f25e81036a0bfaf453fd79c5914f6a971cf68974432480dea0c1cb4eb5c756c98e4ac8
 MISC ChangeLog 6816 SHA256 5d5d77e87c7e2d1a5eb966cff140f01772fcc993ecd16528d046d9a4fc5ac772 SHA512 548dab0b9d7843847c2ebccb36551fde405e1de5422d1579570d3f16c3073a7e25b5d3bb6813c8e01becb8ba81eebbe482c2639b810ca67b4ecaf3e7fb77e52a WHIRLPOOL aa9919ca20fffb5d9b647fb7bff2066a7c6363d7fdc47db7a6876fc2f1351b9cdb913cc76e1d8dad967688673821fa77903a62fa142c16516dcf039df7cb6c9b
 MISC ChangeLog-2015 28569 SHA256 3ba81aa1723ad809f53045b2c8712d882108a7178b603e3edcfdcc55f1b679b2 SHA512 c569a575176d90ea119280751ccec7b0bc1cf8b405e0d757aca8692ce13d27f5d26152613b28d5b845dacd45e72807cc8e79b4078c63c1e4990f7561e0f7d4e9 WHIRLPOOL 113bfd63779a7d79c63a3537e0585b827b167f4b0ebd194de864bee7118681dedd000cf263bac109fe98ae95df11d1e4dc3b5c141f5cd69ab131f3cf085c9d22
 MISC metadata.xml 803 SHA256 1da3a09cc6e259123e1ab88bfb0bbdad458764141abfb22073482e5d73a19ea4 SHA512 1622b5584f14b0fdea3836a6902ef7562bea4e03cf526fdd68d4e0995354cae2036136a68b1c5ee2439d47c5cf28a73cc9754c8b1be56efb4ad84aec0c073c87 WHIRLPOOL a113189f955b206b2caad18c76cfa6888f3c3f2a1ff98caa033120cb5b32af23312d5f6c1d48f7a4f6b07303d71ccf480db750ec621b3bb578b5e6ab618ce008
diff --git a/net-wireless/hostapd/hostapd-2.6.ebuild b/net-wireless/hostapd/hostapd-2.6.ebuild
deleted file mode 100644
index deae4e47f998..000000000000
--- a/net-wireless/hostapd/hostapd-2.6.ebuild
+++ /dev/null
@@ -1,217 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="6"
-
-inherit toolchain-funcs eutils systemd
-
-# bogus commit to force manifest regeneration #596462
-
-DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
-HOMEPAGE="http://hostap.epitest.fi"
-SRC_URI="http://hostap.epitest.fi/releases/${P}.tar.gz"
-
-LICENSE="|| ( GPL-2 BSD )"
-SLOT="0"
-KEYWORDS="amd64 ~arm ~mips ppc x86"
-IUSE="ipv6 logwatch netlink sqlite +ssl +wps +crda"
-
-DEPEND="ssl? ( dev-libs/openssl:*[-bindist] )
-	kernel_linux? (
-		dev-libs/libnl:3
-		crda? ( net-wireless/crda )
-	)
-	netlink? ( net-libs/libnfnetlink )
-	sqlite? ( >=dev-db/sqlite-3 )"
-
-RDEPEND="${DEPEND}"
-
-S="${S}/${PN}"
-
-src_prepare() {
-	# Allow users to apply patches to src/drivers for example,
-	# i.e. anything outside ${S}/${PN}
-	pushd ../ >/dev/null || die
-	default
-	popd >/dev/null || die
-
-	sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \
-		"${S}/hostapd.conf" || die
-}
-
-src_configure() {
-	local CONFIG="${S}/.config"
-
-	# toolchain setup
-	echo "CC = $(tc-getCC)" > ${CONFIG}
-
-	# EAP authentication methods
-	echo "CONFIG_EAP=y" >> ${CONFIG}
-	echo "CONFIG_ERP=y" >> ${CONFIG}
-	echo "CONFIG_EAP_MD5=y" >> ${CONFIG}
-
-	if use ssl; then
-		# SSL authentication methods
-		echo "CONFIG_EAP_FAST=y" >> ${CONFIG}
-		echo "CONFIG_EAP_TLS=y" >> ${CONFIG}
-		echo "CONFIG_EAP_TTLS=y" >> ${CONFIG}
-		echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG}
-		echo "CONFIG_EAP_PEAP=y" >> ${CONFIG}
-		echo "CONFIG_TLSV11=y" >> ${CONFIG}
-		echo "CONFIG_TLSV12=y" >> ${CONFIG}
-	fi
-
-	if use wps; then
-		# Enable Wi-Fi Protected Setup
-		echo "CONFIG_WPS=y" >> ${CONFIG}
-		echo "CONFIG_WPS2=y" >> ${CONFIG}
-		echo "CONFIG_WPS_UPNP=y" >> ${CONFIG}
-		echo "CONFIG_WPS_NFC=y" >> ${CONFIG}
-		einfo "Enabling Wi-Fi Protected Setup support"
-	fi
-
-	echo "CONFIG_EAP_IKEV2=y" >> ${CONFIG}
-	echo "CONFIG_EAP_TNC=y" >> ${CONFIG}
-	echo "CONFIG_EAP_GTC=y" >> ${CONFIG}
-	echo "CONFIG_EAP_SIM=y" >> ${CONFIG}
-	echo "CONFIG_EAP_AKA=y" >> ${CONFIG}
-	echo "CONFIG_EAP_AKA_PRIME=y" >> ${CONFIG}
-	echo "CONFIG_EAP_EKE=y" >> ${CONFIG}
-	echo "CONFIG_EAP_PAX=y" >> ${CONFIG}
-	echo "CONFIG_EAP_PSK=y" >> ${CONFIG}
-	echo "CONFIG_EAP_SAKE=y" >> ${CONFIG}
-	echo "CONFIG_EAP_GPSK=y" >> ${CONFIG}
-	echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG}
-	echo "CONFIG_EAP_PWD=y" >> ${CONFIG}
-
-	einfo "Enabling drivers: "
-
-	# drivers
-	echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG}
-	einfo "  HostAP driver enabled"
-	echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG}
-	einfo "  Wired driver enabled"
-	echo "CONFIG_DRIVER_PRISM54=y" >> ${CONFIG}
-	einfo "  Prism54 driver enabled"
-	echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG}
-	einfo "  None driver enabled"
-
-	einfo "  nl80211 driver enabled"
-	echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG}
-
-	# epoll
-	echo "CONFIG_ELOOP_EPOLL=y" >> ${CONFIG}
-
-	# misc
-	echo "CONFIG_DEBUG_FILE=y" >> ${CONFIG}
-	echo "CONFIG_PKCS12=y" >> ${CONFIG}
-	echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG}
-	echo "CONFIG_IAPP=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211R=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211W=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211N=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211AC=y" >> ${CONFIG}
-	echo "CONFIG_PEERKEY=y" >> ${CONFIG}
-	echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG}
-	echo "CONFIG_INTERWORKING=y" >> ${CONFIG}
-	echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> ${CONFIG}
-	echo "CONFIG_HS20=y" >> ${CONFIG}
-	echo "CONFIG_WNM=y" >> ${CONFIG}
-	echo "CONFIG_FST=y" >> ${CONFIG}
-	echo "CONFIG_FST_TEST=y" >> ${CONFIG}
-	echo "CONFIG_ACS=y" >> ${CONFIG}
-
-	if use netlink; then
-		# Netlink support
-		echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG}
-	fi
-
-	if use ipv6; then
-		# IPv6 support
-		echo "CONFIG_IPV6=y" >> ${CONFIG}
-	fi
-
-	if use sqlite; then
-		# Sqlite support
-		echo "CONFIG_SQLITE=y" >> ${CONFIG}
-	fi
-
-	# If we are using libnl 2.0 and above, enable support for it
-	# Removed for now, since the 3.2 version is broken, and we don't
-	# support it.
-	if has_version ">=dev-libs/libnl-3.2"; then
-		echo "CONFIG_LIBNL32=y" >> .config
-	fi
-
-	# TODO: Add support for BSD drivers
-
-	default_src_configure
-}
-
-src_compile() {
-	emake V=1
-
-	if use ssl; then
-		emake V=1 nt_password_hash
-		emake V=1 hlr_auc_gw
-	fi
-}
-
-src_install() {
-	insinto /etc/${PN}
-	doins ${PN}.{conf,accept,deny,eap_user,radius_clients,sim_db,wpa_psk}
-
-	fperms -R 600 /etc/${PN}
-
-	dosbin ${PN}
-	dobin ${PN}_cli
-
-	use ssl && dobin nt_password_hash hlr_auc_gw
-
-	newinitd "${FILESDIR}"/${PN}-init.d ${PN}
-	newconfd "${FILESDIR}"/${PN}-conf.d ${PN}
-	systemd_dounit "${FILESDIR}"/${PN}.service
-
-	doman ${PN}{.8,_cli.1}
-
-	dodoc ChangeLog README
-	use wps && dodoc README-WPS
-
-	docinto examples
-	dodoc wired.conf
-
-	if use logwatch; then
-		insinto /etc/log.d/conf/services/
-		doins logwatch/${PN}.conf
-
-		exeinto /etc/log.d/scripts/services/
-		doexe logwatch/${PN}
-	fi
-}
-
-pkg_postinst() {
-	einfo
-	einfo "If you are running openRC you need to follow this instructions:"
-	einfo "In order to use ${PN} you need to set up your wireless card"
-	einfo "for master mode in /etc/conf.d/net and then start"
-	einfo "/etc/init.d/${PN}."
-	einfo
-	einfo "Example configuration:"
-	einfo
-	einfo "config_wlan0=( \"192.168.1.1/24\" )"
-	einfo "channel_wlan0=\"6\""
-	einfo "essid_wlan0=\"test\""
-	einfo "mode_wlan0=\"master\""
-	einfo
-	#if [ -e "${KV_DIR}"/net/mac80211 ]; then
-	#	einfo "This package now compiles against the headers installed by"
-	#	einfo "the kernel source for the mac80211 driver. You should "
-	#	einfo "re-emerge ${PN} after upgrading your kernel source."
-	#fi
-
-	if use wps; then
-		einfo "You have enabled Wi-Fi Protected Setup support, please"
-		einfo "read the README-WPS file in /usr/share/doc/${P}"
-		einfo "for info on how to use WPS"
-	fi
-}