gentoo resync : 14.12.2020

2 files changed, 291 insertions, 0 deletions

diff --git a/net-print/hplip/Manifest b/net-print/hplip/Manifest
index 9ee43fbe88fb..8177f1d61532 100644
--- a/net-print/hplip/Manifest
+++ b/net-print/hplip/Manifest
@@ -1,11 +1,14 @@
 DIST hplip-3.18.12-patches-1.tar.xz 12032 BLAKE2B 33e6e4e1e0e5b4f998459073cf0742b7c56929b23e6c1cc3ba9df4eafb8007273a5a2e7f27af0d2d4a3a97ebb9cfe462b74dcddd7149088980893b2c66113b7c SHA512 3b0e2b4f7d8da257c6fcf12f2e049276d059426f2d1c626324982ce862efa2323cbb191a373c53fea7880e3b6e44ec62e584091676556d97e6a456edea4c44cf
 DIST hplip-3.19.12.tar.gz 25676247 BLAKE2B 1373aa70a2307071c28a22b0ae85e242c3e6bec614ef7490c1ecc0e5e745b81b6c2097948fbd062b5e72e10714cdc8d6f9145aacafc0fedeafde375909cb2cb6 SHA512 5552cd717ae082ee55cdb77d79e8d035d8ecb7cf23c79d659fda43468d8ed414a33c4d869eab4ab83dee836f0d1cceb74c3c4a249e26f904a5ab2350e08a5677
+DIST hplip-3.20.11-patches-1.tar.xz 17876 BLAKE2B 39514399b4b43c668c38f7fe570fc53f50547598fc86ddf383b237a6992e9c24e3aab524bee0c7055003e766f8fea67cbe7c86ab4c23911d31ade0ad4766b181 SHA512 eabc26feca22e2d6dbafb9f40df5d61fde1fd08ac0cfb17751b0e179ecd6cc3ce6c4434746293aa372d9cca0bdc9b5d6bc96af9e199aeab5b3621e2c584fedc1
+DIST hplip-3.20.11.tar.gz 26301441 BLAKE2B 14667f33cc50b2887c8434ada7327a82e16b9acbcdc75d3a50c0261ec9aef3fada9be81e6c0cbdfb4d29914630799c6406893644386db99c0ce86245cca38cc2 SHA512 f583fb4140a29c5e21956c3e51fe3620baa65d33b40447af419d7fc61473a1148a1873216a84e89be785b155ee8e9aebd5e3eb19d2ded82b8415b1a35de1b55d
 DIST hplip-3.20.5-patches-1.tar.xz 12716 BLAKE2B 982480185b2decb9f4e857336b474dab585d64aa44a9f0da70ba568e20488f451507aae3bd1427aef4274d36db93dd9bcb1d906f7b393939dfc43c81a1f9a9db SHA512 ae46a6f490253a1112838b08d56199c6257d33911569619483d925798b54a8bc9fe57afd1e86dedb9482d89d42f44bec81db215f37cbcd8fb5982596c80c1117
 DIST hplip-3.20.6-patches-2.tar.xz 14308 BLAKE2B b9982387364344e90d87769f4f5da2eae06ca9a21685d8d17aa8a0ac446285f806f8fdbc9c0aa3a7fdf6a2daee6440955974c2c34053d3e160931e327a2681da SHA512 e611be1eba5bc0d9c53b0563b5c42e2a06e73031431a40db9c360dc28106736eafa645be7fca86bbcfddf54efe6885369548cea508d51d03125f1807c18a62e3
 DIST hplip-3.20.6.tar.gz 25908476 BLAKE2B cd70d00081ff41d36b566d6f6f546b2cddabb46427afafcd2d04ea7769ce5114feff74612e58ffa83dde4e817ffa2804dbf41411187d9cd15ed7b888b87658ad SHA512 ccd82112afb5ee73f5d027819ab89ba8f52ec36a4b061d314565f95d288be24e045050c3368332eeae50c0fb170f8cb015fdd8dde4b32a08e3758f0f0f4e8e96
 DIST hplip-3.20.9-patches-2.tar.xz 18040 BLAKE2B f218703f5e6f319306b6cd178eb9f91981eed0d0c06b14c6846ad8a79b1d92b66176856f7b8bb272d0fa20194d4150fecf066c11fff5996f32b6fd71e1d6237d SHA512 5aa16f9c4e829774ea9266f30f6cd9d78556ea4ed36abc57cb11975c097c8bfdc44f139f5b1236af79859355ef715ec27d47f187d330541b29361e779d972fff
 DIST hplip-3.20.9.tar.gz 26141198 BLAKE2B 3aa353343ee79ae04dbe94cb9e135469586a50c2052a21ffcff6907be40522a1605f1174b0b8891dea25abb83a3b836350e1e6c9d12ab2798aa826f1d3ce4069 SHA512 d2981cf51f6d893a576c51808710ac9815aa6ac5fdc617d95cc372518731a48b0aca09af721c1792e1531df6cf8fc0ebf5ebd7e9c96950602a830ceed3d441ae
 EBUILD hplip-3.19.12-r1.ebuild 7744 BLAKE2B e19803ef105c70237b7c88d7d45f756a219195f3f0d01ad7040676226f0acba81bb9dc94de2d8ea20081e420155297414a87a303e779bca2d03d5ed82685d1dd SHA512 b15681bbf4f396df4abd145d02a7ddca006cff7619a852b5cbdbcd5fd89d6cf34534aadf5e33114f47a8ab1443453b03f6dac71c71a80ba6740418bd699280b0
+EBUILD hplip-3.20.11.ebuild 8366 BLAKE2B 96dccc122bf601652dbea92ec13b48425f44a4d020ccb49d117a83bdaa9fa4c56a69296216dc4f045676016f7b90ec7c9fea7f8f479d07fc1946d2b4ab86aedb SHA512 a075b9bd4e0ce160480996dc6fead5304884662206cbcbb274699670df85634d88696a4a6bd75cc8b53cc20f347c5cf70ca295a5596a7b1848ccac73d3f35eef
 EBUILD hplip-3.20.6-r1.ebuild 7913 BLAKE2B 0d991ff1f5d52716cbfa089c0eb4c0c18340168eec8742b588769f9cee575ece1ad38351db7066a1bddc3fdada1bffdfc6dac42580298811db6dbca128af52eb SHA512 2b7d729e4cb51d1e278eeabf57d18a379bb4545407e468290dc30a7bc7963be84bd54607b75c58b899176d3490066738fe7811e9b5fa0dcb64ecfac4f05de71f
 EBUILD hplip-3.20.6-r3.ebuild 7860 BLAKE2B f214152b4af58e6ae3ec5921705669fba5b450717038e1a11a07fbb4681d95fe84ebb6ce172505e6e31cb5cfea559253c4a913d0481ed15ed181f7c4780407bc SHA512 d9db5ce52c87b9c13187a7a6cf9c3b119ce579f0b5e35525bbdd516c0c0909cb89e5aa7462c41c09bf4c5092de6fa21d76547ce7a0bfcb5c9a4abadd490b8843
 EBUILD hplip-3.20.9-r3.ebuild 7929 BLAKE2B ca7fad7a4eef708d5ac46691dcf39ea2d81037058e748ede78e0086c2998c73e8b2684c26bcd2a6e63e23490c7ac687d0d538ea1a32059bdb377cb63dedb961c SHA512 f2c93711956ca9acd38ab6f3575d3d9090366fe481b2a57a1743a65789b4a04dbd20b404c520cf7bbe7ec66a5bd77b0a58d6c12e9699d679287a13f02a3f1a47
diff --git a/net-print/hplip/hplip-3.20.11.ebuild b/net-print/hplip/hplip-3.20.11.ebuild
new file mode 100644
index 000000000000..b56b77c24785
--- /dev/null
+++ b/net-print/hplip/hplip-3.20.11.ebuild
@@ -0,0 +1,288 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+PYTHON_COMPAT=( python3_{6,7,8} )
+PYTHON_REQ_USE="threads(+),xml"
+
+# 14 and 15 spit out a lot of warnings about subdirs
+WANT_AUTOMAKE="1.13"
+
+inherit autotools linux-info python-single-r1 readme.gentoo-r1 udev
+
+DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools"
+HOMEPAGE="https://developers.hp.com/hp-linux-imaging-and-printing"
+SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
+		https://dev.gentoo.org/~billie/distfiles/${PN}-3.20.11-patches-1.tar.xz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~arm ~arm64 ~ppc ~ppc64 ~x86"
+
+IUSE="doc fax +hpcups hpijs kde libnotify libressl -libusb0 minimal parport policykit qt5 scanner +snmp static-ppds X"
+
+COMMON_DEPEND="
+	net-print/cups
+	sys-apps/dbus
+	virtual/jpeg:0
+	hpijs? ( net-print/cups-filters[foomatic] )
+	!libusb0? ( virtual/libusb:1 )
+	libusb0? ( virtual/libusb:0 )
+	${PYTHON_DEPS}
+	!minimal? (
+		scanner? (
+			media-gfx/sane-backends
+		)
+		snmp? (
+			!libressl? ( dev-libs/openssl:0= )
+			libressl? ( dev-libs/libressl:= )
+			net-analyzer/net-snmp:=
+			$(python_gen_cond_dep 'net-dns/avahi[dbus,${PYTHON_MULTI_USEDEP}]')
+		)
+	)
+"
+BDEPEND="
+	virtual/pkgconfig
+"
+DEPEND="
+	${COMMON_DEPEND}
+"
+RDEPEND="
+	${COMMON_DEPEND}
+	app-text/ghostscript-gpl
+	!minimal? (
+		$(python_gen_cond_dep 'dev-python/pygobject:3[${PYTHON_MULTI_USEDEP}]' 'python3*')
+		kernel_linux? ( virtual/udev )
+		$(python_gen_cond_dep '
+			>=dev-python/dbus-python-1.2.0-r1[${PYTHON_MULTI_USEDEP}]
+			dev-python/distro[${PYTHON_MULTI_USEDEP}]
+			fax? ( dev-python/reportlab[${PYTHON_MULTI_USEDEP}] )
+			qt5? (
+				>=dev-python/PyQt5-5.5.1[dbus,gui,widgets,${PYTHON_MULTI_USEDEP}]
+				libnotify? ( dev-python/notify2[${PYTHON_MULTI_USEDEP}] )
+			)
+			scanner? (
+				>=dev-python/reportlab-3.2[${PYTHON_MULTI_USEDEP}]
+				>=dev-python/pillow-3.1.1[${PYTHON_MULTI_USEDEP}]
+				X? (
+					|| (
+						kde? ( kde-misc/skanlite )
+						media-gfx/xsane
+						media-gfx/sane-frontends
+					)
+				)
+			)
+		')
+	)
+	policykit? ( sys-auth/polkit )
+"
+
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+PATCHES=(
+	"${WORKDIR}/patches"
+)
+
+CONFIG_CHECK="~PARPORT ~PPDEV"
+ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)."
+
+#DISABLE_AUTOFORMATTING="yes"
+DOC_CONTENTS="
+For more information on setting up your printer please take
+a look at the hplip section of the gentoo printing guide:
+https://wiki.gentoo.org/wiki/Printing
+"
+
+pkg_setup() {
+	python-single-r1_pkg_setup
+
+	use scanner && ! use X && ewarn "You need USE=X for the scanner GUI."
+
+	use parport && linux-info_pkg_setup
+
+	if use minimal ; then
+		ewarn "Installing driver portions only, make sure you know what you are doing."
+		ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver"
+		ewarn "is installed. If both USE flags are set hpijs overrides hpcups."
+		ewarn "This also disables fax, network, scanner and gui support!"
+	fi
+
+	if ! use hpcups && ! use hpijs ; then
+		ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
+		ewarn "which is probably not what you want."
+		ewarn "You will almost certainly not be able to print."
+	fi
+}
+
+src_prepare() {
+	default
+
+	python_fix_shebang .
+
+	# Make desktop files follow the specification
+	# Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680
+	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324
+	sed -i -e '/^Categories=/s/Application;//' \
+		-e '/^Encoding=.*/d' hplip.desktop.in || die
+	sed -i -e '/^Categories=/s/Application;//' \
+		-e '/^Version=.*/d' \
+		-e '/^Comment=.*/d' hplip-systray.desktop.in || die
+
+	# Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725
+	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847,
+	# https://bugs.launchpad.net/hplip/+bug/500086
+	local udevdir=$(get_udevdir)
+	sed -i -e "s|/etc/udev|${udevdir}|g" \
+		$(find . -type f -exec grep -l /etc/udev {} +) || die
+
+	# Force recognition of Gentoo distro by hp-check
+	sed -i \
+		-e "s:file('/etc/issue', 'r').read():'Gentoo':" \
+		installer/core_install.py || die
+
+	eautoreconf
+}
+
+src_configure() {
+	local drv_build minimal_build
+
+	if use hpcups ; then
+		drv_build="$(use_enable hpcups hpcups-install)"
+		if use static-ppds ; then
+			drv_build="${drv_build} --enable-cups-ppd-install"
+			drv_build="${drv_build} --disable-cups-drv-install"
+		else
+			drv_build="${drv_build} --enable-cups-drv-install"
+			drv_build="${drv_build} --disable-cups-ppd-install"
+		fi
+	else
+		drv_build="--disable-hpcups-install"
+		drv_build="${drv_build} --disable-cups-drv-install"
+		drv_build="${drv_build} --disable-cups-ppd-install"
+	fi
+
+	if use hpijs ; then
+		drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
+		if use static-ppds ; then
+			drv_build="${drv_build} --enable-foomatic-ppd-install"
+			drv_build="${drv_build} --disable-foomatic-drv-install"
+		else
+			drv_build="${drv_build} --enable-foomatic-drv-install"
+			drv_build="${drv_build} --disable-foomatic-ppd-install"
+		fi
+	else
+		drv_build="${drv_build} --disable-hpijs-install"
+		drv_build="${drv_build} --disable-foomatic-drv-install"
+		drv_build="${drv_build} --disable-foomatic-ppd-install"
+	fi
+
+	if use minimal ; then
+		if use hpijs ; then
+			minimal_build="--enable-hpijs-only-build"
+		else
+			minimal_build="--disable-hpijs-only-build"
+		fi
+		if use hpcups ; then
+			minimal_build="${minimal_build} --enable-hpcups-only-build"
+		else
+			minimal_build="${minimal_build} --disable-hpcups-only-build"
+		fi
+		minimal_build="${minimal_build} --disable-fax-build"
+		minimal_build="${minimal_build} --disable-network-build"
+		minimal_build="${minimal_build} --disable-scan-build"
+		minimal_build="${minimal_build} --disable-gui-build"
+	else
+		if use fax ; then
+			minimal_build="${minimal_build} --enable-fax-build"
+		else
+			minimal_build="${minimal_build} --disable-fax-build"
+		fi
+		if use snmp ; then
+			minimal_build="${minimal_build} --enable-network-build"
+		else
+			minimal_build="${minimal_build} --disable-network-build"
+		fi
+		if use scanner ; then
+			minimal_build="${minimal_build} --enable-scan-build"
+		else
+			minimal_build="${minimal_build} --disable-scan-build"
+		fi
+		if use qt5 ; then
+			minimal_build="${minimal_build} --enable-qt5"
+			minimal_build="${minimal_build} --enable-gui-build"
+		else
+			minimal_build="${minimal_build} --disable-gui-build"
+			minimal_build="${minimal_build} --disable-qt5"
+		fi
+	fi
+
+	# disable class driver for now
+	econf \
+		--disable-class-driver \
+		--disable-foomatic-rip-hplip-install \
+		--disable-cups11-build \
+		--disable-lite-build \
+		--disable-shadow-build \
+		--disable-qt3 \
+		--disable-qt4 \
+		--disable-udev_sysfs_rules \
+		--with-cupsbackenddir=$(cups-config --serverbin)/backend \
+		--with-cupsfilterdir=$(cups-config --serverbin)/filter \
+		--with-docdir=/usr/share/doc/${PF} \
+		--with-htmldir=/usr/share/doc/${PF}/html \
+		--enable-hpps-install \
+		--enable-dbus-build \
+		${drv_build} \
+		${minimal_build} \
+		$(use_enable doc doc-build) \
+		$(use_enable libusb0 libusb01_build) \
+		$(use_enable parport pp-build) \
+		$(use_enable policykit)
+
+	# hpijs ppds are created at configure time but are not installed (3.17.11)
+
+	# Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
+	# The hpcups driver does not use foomatic-rip
+	#local i
+	#for i in ppd/hpijs/*.ppd.gz ; do
+	#	rm -f ${i}.temp || die
+	#	gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \
+	#		gzip > ${i}.temp || die
+	#	mv ${i}.temp ${i} || die
+	#done
+}
+
+src_install() {
+	# Disable parallel install
+	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018
+	emake -j1 DESTDIR="${D}" install
+	einstalldocs
+	# default
+
+	# Installed by sane-backends
+	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023
+	rm -f "${ED}"/etc/sane.d/dll.conf || die
+
+	# Remove desktop and autostart files
+	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=638770
+	use qt5 || {
+		rm -Rf "${ED}"/usr/share/applications "${ED}"/etc/xdg
+	}
+
+	rm -f "${ED}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die
+	rmdir --ignore-fail-on-non-empty "${ED}"/usr/share/doc/${PF}/ || die
+
+	# Remove hal fdi files
+	rm -rf "${ED}"/usr/share/hal || die
+
+	find "${D}" -name '*.la' -delete || die
+
+	python_optimize "${ED}"/usr/share/hplip
+
+	readme.gentoo_create_doc
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+}