reinit the tree, so we can have metadata

4 files changed, 304 insertions, 0 deletions

diff --git a/net-dialup/ueagle4-atm/Manifest b/net-dialup/ueagle4-atm/Manifest
new file mode 100644
index 000000000000..5af27bf1d589
--- /dev/null
+++ b/net-dialup/ueagle4-atm/Manifest
@@ -0,0 +1,6 @@
+AUX README 8682 SHA256 f2a6ec2f20670e6bef283f032c7c8d63d5fc6868aabcc5a5547b4f45b3ef0b3f SHA512 4441464519b518d3b666df88323624a6ca4ce746b75dcd2d8ba638d0a3b953d9d5a34344e6acdb400b5a4fe5ccd9fec49202bb357a6d9c76b49dd8e0accb265c WHIRLPOOL 2218d6c830bf876f0fa0315df6b6c88ec859c4ca45496ba9d2c1be79625a447d29e69c549cfc13f1ab140534233ef5109dd8dc84eea44573b69faa1f241cc2b9
+DIST ueagle4-data-1.0.tar.gz 217512 SHA256 1e3547821d69b9f576add1e35223df159aadfd9e3dae913b6429a1cbbe1a3691 SHA512 3d47150eb288865432e7201390669262e0d12239f5d45d194da8abe535e69cabcb53ef6b8757ab7e3c495394ecd74b781ac724635918b70c479a1219b3bcaa74 WHIRLPOOL 69926d2f8d4606db044f08f16c0cc274ed3b139db2415773a67b0857ac614f7632d85362c8bbcd189f2394355211d8c26112f1d7214717e6a6b4b41c63a3976f
+EBUILD ueagle4-atm-1.0.ebuild 1673 SHA256 0f1731c6b2bbc1bbba84cac588054c0b574b70693a615d03047a7197a01722e5 SHA512 f6b5c31eb8193aa2812229943f37b48ad8868ec4a692d30cb8a067b0904ea5ce774e4d3b94c633295afae40f868b5449bffb84995b09d56c3535dac9fbc1114d WHIRLPOOL b9a853878bb891f7a98e2622c1891dda3f1cf5edc424e4a4570b974906b3f4fdbc2912b40aeeb9fcb76096371b42042dabed294ec62573824815bd1d0a89189e
+MISC ChangeLog 2874 SHA256 5dd797cc6add40b495be83f8115d02b0a922a9c9406b10b6cc2404ef56bbfacf SHA512 d797d373cde021936f77a762dd5329b1f0d44861ff4e6cd99916ff443ae3f8b2617143241955eb610b45ff0110ee968bdb2c594930e8b397c1572ad92e4d4dd8 WHIRLPOOL 7ca24c755d8532e17382320e33a9a86f10583657f558f739ff7dd802dba72cb77720b32e2c2267a43aeb8f88a93575c4d7839545cbff37231e27cb013b3e0f1d
+MISC ChangeLog-2015 561 SHA256 290c5e1b430fb94c317caee171c37f90d5846413f9822cb2532a753bb63341f0 SHA512 89011834d180773cc8fd1731d9fe73bbbbdef06c1140360aa5c4cd4573d820d88cd187863d4f83a7194f4365c59b988f208ef046ba8393066919caca779b23d0 WHIRLPOOL 66455e50f2c199f58e160880c414816f02ad7847c1225b001106942fd66dfe83c189e807025167a12fb980c19ce606eb5de5878607abb6e7dff6a103540e56a3
+MISC metadata.xml 313 SHA256 c3d37e08ccf7ac07585bdf49c8f50c50808542729ca62d949bb63eac5b0e6683 SHA512 5e82ee1abcd89c42e7519966aae253537495a2b471b479a75a0aa0f9d5c11b57772a0138223abd3edd29c7393f0ad198bd8e7da9c3035660e441c11f21641458 WHIRLPOOL 5c08b8bbbe9f8c1319a35c9335259da452cd6a7dfe6cf23716ef69c47feea0cf7cc50a209038dfc938a0f4cd6275e3bd3aea815b425471f0c74ee346f4469a81
diff --git a/net-dialup/ueagle4-atm/files/README b/net-dialup/ueagle4-atm/files/README
new file mode 100644
index 000000000000..20067824f303
--- /dev/null
+++ b/net-dialup/ueagle4-atm/files/README
@@ -0,0 +1,235 @@
+Introduction
+============
+
+This ebuild installs firmware files necessary for Eagle USB E4 ADSL 
+Modem driver which first appeared in kernel 2.6.16.
+
+Configuration
+=============
+
+Most ADSL modems are connected via the ATM protocol, rather
+than Ethernet. For ATM, run the following:
+   euse -E atm && emerge net-dialup/ppp net-dialup/ueagle-atm
+
+It is necessary to choose an interface number for the connection. This
+is arbitrary - the only requirement is that the connection number is
+not already in use. The first available number is 0, and it is usual to
+choose the lowest unused number. For the purposes of this document, 0
+will be chosen.
+
+Add the following lines from the appropriate section below to
+/etc/conf.d/net, then customize them as per the inline comments.
+
+
+a) PPPoATM configuration:
+
+config_ppp0='ppp'  # Runs /lib/rcscripts/net/pppd.sh
+# The 2 numbers represent the VPI & VCI of your ISP, and they are separated
+# by a dot. Ask your ISP about those numbers.
+link_ppp0='0.38'
+plugins_ppp0='pppoa' 
+# 'man pppd' shows other options. Compression is disabled because it is
+# rarely taken advantage of, and may interfere with the connection.
+# Add option 'usepeerdns' to populate /etc/resolv.conf
+pppd_ppp0='updetach noauth debug defaultroute noaccomp nobsdcomp noccp
+	nodeflate nopcomp novj novjccomp child-timeout 60'
+username_ppp0='username@isp.com'  # ADSL login, assigned by your ISP
+password_ppp0='password'  # ADSL password, assigned by your ISP
+
+# If the kernel modules are not built-in, then they must be loaded
+# before starting the PPP daemon:
+function preup() {
+	if [[ "$1" = "ppp0" ]] ; then
+		modprobe -q ueagle-atm
+		return 0
+	fi
+}
+
+
+b) PPPoE configuration:
+
+# Configure first the RFC2684 bridge interface 
+config_nas0='null'
+# Use "-e 0" for LLC mux or "-e 1" for VC mux.
+# The 2 numbers after "-a" represent the VPI & VCI of your ISP, and
+# they are separated by a dot. Ask your ISP about those numbers.
+br2684ctl_nas0='-e 0 -a 0.38'
+
+config_ppp0='ppp'  # Runs /lib/rcscripts/net/pppd.sh
+link_ppp0='nas0' # The name of the RFC2684 bridge interface
+plugins_ppp0='pppoe'
+# 'man pppd' shows other options. Compression is disabled because it is
+# rarely taken advantage of, and may interfere with the connection.
+# Add option 'usepeerdns' to populate /etc/resolv.conf
+pppd_ppp0='updetach noauth debug defaultroute noaccomp nobsdcomp noccp
+	nodeflate nopcomp novj novjccomp child-timeout 60'
+username_ppp0='username@isp.com'  # ADSL login, assigned by your ISP
+password_ppp0='password'  # ADSL password, assigned by your ISP
+
+depend_ppp0() {
+    need net.nas0
+}
+
+# If the kernel modules are not built-in, then they must be loaded
+# before starting the RFC2684 bridge:
+function preup() {
+	if [[ "$1" = "nas0" ]] ; then
+		modprobe -q ueagle-atm
+		return 0
+	fi
+}
+
+
+Configuration continued
+=======================
+
+Create a symlink for the new network interface, for it to be enabled by
+baselayout:
+  cd /etc/init.d && ln -sfn net.lo net.ppp0
+If you use PPPoE, you should also create the symlink for the RFC2684
+bridge interface:
+  cd /etc/init.d && ln -sfn net.lo net.nas0
+
+The "debug" option adds some extra commentary from pppd regarding the
+connection to /var/log/messages, e.g.:
+"sent [LCP ConfReq id=0x1 <magic 0x7bea6ef1>]". It is wise to keep the
+option on permanently, due to its usefulness when debugging.
+
+Set RC_NET_STRICT_CHECKING="yes" in /etc/conf.d/rc, to prevent Internet
+services in /etc/init.d/ from starting before the Internet connection
+is established. Other options are to start/stop programs in
+/etc/ppp/ip-{up,down}.local, and to customize initscript dependencies
+as described in:
+  http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=2&chap=4
+
+
+Starting the Connection
+=======================
+
+To start manually, with the modem connected:
+  /etc/init.d/net.ppp0 start
+
+To start automatically when the PC boots:
+  rc-update add net.ppp0 default
+
+
+Kernel Configuration
+====================
+
+The ebuild, during an emerge, checks that the required kernel modules
+are present.
+
+Note that in the list below, "[*]" means that the option is compiled
+into the kernel, whereas "[M]" means that the option can either be
+compiled into the kernel, or as a module. Compiling them into the
+kernel is recommended, to guarantee that the modules are already loaded
+when they are needed, and it will improve the bootup time by a couple
+of seconds.
+
+In "make menuconfig", you can press "/" and search on e.g. "eagle"
+to see exactly where an option is - the location of an option and its
+dependencies can change between kernel versions.
+
+Check that the following kernel options are configured as shown (this
+list includes the prerequisites, e.g. USB_UEAGLEATM depends on USB):
+
+ Code maturity level options  --->
+  [*] Prompt for development and/or incomplete code/drivers
+        - CONFIG_EXPERIMENTAL
+
+ Device Drivers  --->
+  Generic Driver Options  --->
+   [ ] Select only drivers that don't need compile-time external
+        firmware (*unselected*) - CONFIG_STANDALONE
+   [*] Hotplug firmware loading support - CONFIG_FW_LOADER
+
+ Networking  --->
+   [*] Networking support - CONFIG_NET
+   Networking options  --->
+    [*] Packet socket - CONFIG_PACKET
+    [M] Asynchronous Transfer Mode (ATM) - CONFIG_ATM
+    [M] RFC1483/2684 Bridged protocols - CONFIG_ATM_BR2684 (only needed for PPPoE)
+   
+ Device Drivers  --->
+  Network device support  --->
+   [*] Network device support - CONFIG_NETDEVICES
+   [*] PPP (point-to-point protocol) support - CONFIG_PPP
+   [M] PPP Deflate compression - CONFIG_PPP_DEFLATE (only useful if
+        compression is supported - rare)
+   [M] PPP BSD-Compress compression - CONFIG_PPP_BSDCOMP (only useful
+        if compression is supported - rare)
+   [M] PPP over Ethernet - CONFIG_PPPOE (only needed for PPPoE)
+   [M] PPP over ATM - CONFIG_PPPOATM (only needed for PPPoATM)
+  USB support  --->
+   [*] Support for Host-side USB - CONFIG_USB
+   [*] USB device filesystem - CONFIG_USB_DEVICEFS
+   [M] (O or U)HCI HCD support
+   USB DSL modem support  ---> 
+    [M] USB DSL modem support - CONFIG_USB_ATM
+    [M] ADI 930 and eagle USB DSL modem - CONFIG_USB_UEAGLEATM
+
+
+
+Troubleshooting
+===============
+
+Try "emerge ueagle-atm" again, because the ebuild checks that the
+required kernel modules are present (showing a warning message if
+appropriate), and creates the firmware files in /lib/firmware/ueagle-atm.
+
+If the modem is unresponsive, then run "/etc/init.d/net.ppp0 stop" and
+unplug the modem for 30 seconds, to drain its memory. Then reconnect
+the modem to the PC and run "/etc/init.d/net.ppp0 start"
+
+To check the modem's connection progress, run:
+  tail -f /var/log/messages
+/var/log/messages should show e.g.:
+
+pppd[nnn]: Plugin pppoatm.so loaded.
+pppd[nnn]: pppd n.n.n started by root, uid 0
+pppd[nnn]: Using interface ppp0
+pppd[nnn]: Connect: ppp0 <--> n.nn
+ADSL line is synchronising
+DSL line goes up
+ADSL line is up (nnn Kib/s down | nnn Kib/s up)
+pppd[nnn]: CHAP authentication succeeded
+pppd[nnn]: local  IP address nnn.nnn.nnn.nnn
+pppd[nnn]: remote IP address nnn.nnn.nnn.nnn
+
+
+If the authentification fails, then check username_ppp0 and
+password_ppp0.
+
+If the ADSL connection is not established, then check the options in
+pppd_ppp0. "man pppd" explains all the options in that file.
+
+If the ADSL connection seems to have worked, but no websites can be
+contacted, then check that /etc/resolv.conf is populated, and possibly
+add the "usepeerdns" option (to use the ISP's DNS) to pppd_ppp0 in
+/etc/conf.d/net .
+
+If the problem is still not resolved, post to the Gentoo Forums at 
+http://forums.gentoo.org/ and ultimately, if there is no answer, 
+file a bug at http://bugs.gentoo.org/ .
+
+
+Compression
+===========
+
+Some ISPs require compression to be disabled in order for the
+connection to work, so the default configuration described above
+disables compression. Few ISPs support ADSL compression anyway. If you
+are lucky enough to have an ISP which *does* support compression
+(Google is your best friend for determining this), then compression can
+be enabled by following these steps:
+
+* Compile the kernel modules CONFIG_PPP_DEFLATE and CONFIG_PPP_BSDCOMP
+(only one is strictly necessary - pppd prefers "deflate" compression).
+Add them to /etc/modules.autoload.d/kernel-2.6 or /etc/conf.d/net above
+the "pppoatm" line, if they are not built-in.
+* Remove the following options in pppd_ppp0:
+  noaccomp nobsdcomp noccp nodeflate nopcomp novj novjccomp
+* Ensure that "debug" is in the pppd_ppp0 options, to check that
+compression is being utilized. Note that "module registered" in
+/var/log/messages only confirms that the kernel module is loaded - 
+it does not indicate that the connection is compressed.
diff --git a/net-dialup/ueagle4-atm/metadata.xml b/net-dialup/ueagle4-atm/metadata.xml
new file mode 100644
index 000000000000..331b50f53b69
--- /dev/null
+++ b/net-dialup/ueagle4-atm/metadata.xml
@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
+<pkgmetadata>
+	<!-- maintainer-needed -->
+	<longdescription>Firmware and configuration instructions for Eagle USB E4 ADSL Modem driver
+available in kernels &gt;= 2.6.16.</longdescription>
+</pkgmetadata>
diff --git a/net-dialup/ueagle4-atm/ueagle4-atm-1.0.ebuild b/net-dialup/ueagle4-atm/ueagle4-atm-1.0.ebuild
new file mode 100644
index 000000000000..80b2ba00625b
--- /dev/null
+++ b/net-dialup/ueagle4-atm/ueagle4-atm-1.0.ebuild
@@ -0,0 +1,56 @@
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=6
+
+inherit eutils linux-info
+
+DESCRIPTION="Firmware and configuration instructions for Eagle USB E4 ADSL Modem driver"
+HOMEPAGE="https://gna.org/projects/ueagleatm/"
+SRC_URI="http://eagle-usb.org/ueagle-atm/non-free/ueagle4-data-${PV}.tar.gz"
+
+LICENSE="Ikanos"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+
+DEPEND=""
+RDEPEND="net-dialup/ppp
+	!sys-kernel/linux-firmware"
+
+S="${WORKDIR}/ueagle4-data-${PV}"
+
+src_install() {
+	# Copy to the firmware directory
+	insinto /lib/firmware/ueagle-atm
+	doins *
+
+	# Documentation necessary to complete the setup
+	dodoc "${FILESDIR}/README"
+}
+
+pkg_postinst() {
+	# Check kernel configuration
+	local CONFIG_CHECK="~FW_LOADER ~NET ~PACKET ~ATM ~NETDEVICES ~USB_DEVICEFS ~USB_ATM ~USB_UEAGLEATM \
+		~PPP ~PPPOATM ~PPPOE ~ATM_BR2684"
+	local WARNING_PPPOATM="CONFIG_PPPOATM:\t is not set (required for PPPoA links)"
+	local WARNING_PPPOE="CONFIG_PPPOE:\t is not set (required for PPPoE links)"
+	local WARNING_ATM_BR2684="CONFIG_ATM_BR2684:\t is not set (required for PPPoE links)"
+	check_extra_config
+	echo
+
+	# Check user-space for PPPoA support
+	if ! has_version net-dialup/ppp[atm] ; then
+		ewarn "Run the following command if connecting via PPPoA protocol:"
+		ewarn "   euse -E atm && emerge net-dialup/ppp"
+		echo
+	fi
+	# Check user-space for PPPoE support
+	if ! has_version net-dialup/linux-atm ; then
+		ewarn "Run the following command if connecting via PPPoE protocol:"
+		ewarn "   emerge net-dialup/linux-atm"
+		echo
+	fi
+
+	ewarn "To complete the installation, you must read the documentation in"
+	ewarn "   ${ROOT}usr/share/doc/${PF}"
+}