reinit the tree, so we can have metadata

6 files changed, 637 insertions, 0 deletions

diff --git a/app-emulation/xen/Manifest b/app-emulation/xen/Manifest
new file mode 100644
index 000000000000..14897278bd30
--- /dev/null
+++ b/app-emulation/xen/Manifest
@@ -0,0 +1,13 @@
+AUX xen-4.6-efi.patch 1954 SHA256 6ac4fc1fc99e89a16838a54c8b0657a84caa296d739d1ce9443bf4f10cbe57db SHA512 361af33159cf49626e92d2815fd4422ea5b1d696a32ce2695ce75205fbbfb89d96b64a8af7332fffdc4a4390000bf52d3730403dfc2334af0da0bea59d58b689 WHIRLPOOL 2a2a306e8ab6c57c169b2adc46ac9e00208e8adf294e5da407406e392da0177c47e84bd21832147e665135ec618e2dd161f6f32c280d82c7f4583ff39bc532e2
+DIST xen-4.7.2-upstream-patches-0.tar.xz 45944 SHA256 e7783bc9adc939167eaef91e96fda506d2d52815f709b31952229891357e6b67 SHA512 6d4e23fb5a63fd191f893e31194b6397a394956846f356ae0119c656a92e7e22296e728286a98109b64a5736241b2317969f54915e7b487b4d7a64aae534614c WHIRLPOOL e185ce40085559d00a302eae8814b4c013817a5e4c0a2a9c56a6b4983b38e7103e44d0407fa78ea79fdbe8eefde346b994812851d8b4bad0bf08cb5721507c37
+DIST xen-4.7.2.tar.gz 20714281 SHA256 61494a56d9251e2108080f95b0dc8e3d175f1ba4da34603fc07b91cfebf358d5 SHA512 8f447e7feffec81fea5b5a4098968b8b8cebc6989e7b6a845413317644d5d328d6f12181d09266366200878ab6a29ab34c7235c1af7b55463a3fdaea40ee1500 WHIRLPOOL 27f3fd88846724e03bf9bb53133046cb79139950c9162dd9c9a85798e169259f73dc2fe4212e750ce9a8fd1d0abd99f1f76108faceb7bf1934ce0495377ee756
+DIST xen-4.7.3.tar.gz 20722625 SHA256 5b5385b476e59e4cf31ecc6dd605df38814b83432b8e8d917f18c8edfdfb708f SHA512 df596bef7f0f0e7f35246fb025913721dae5aa91da27f1b47a49256e9faa8f7dcb80e8c4679345c19614093c02059b6ced54fc51e6900a372b0e76b4ad827126 WHIRLPOOL 9e88db149e216651711cd56830fba33d587de60d57d53fd3ab3db231319f74e4e88222bf1b2bb9b20fea68739bccd4b26304c73a0ae25aad6dbbac64681e3a62
+DIST xen-4.8.2-upstream-patches-0.tar.xz 7540 SHA256 d4bd4ce76097c49ebbad67a64814b9b41af0528b390ade15814cf0fb144e5e77 SHA512 34118ac114773cfc01a464de2a93b14905d3fb5edd62ae093f6cb40758f89c7fdc8449d0b7e9bfbaaee812b6f32b0c21860adeebb609376a22ce231e405b0837 WHIRLPOOL 0ff8c2fe3c349e6dc85e98644a813dd590c42bc78c6bbf98cdf77ed516e73fe5ca72a44935eae77f6ff9dcba8fef5d24c181d24b63b15bc470e7ed59098d5808
+DIST xen-4.8.2.tar.gz 22522336 SHA256 cb1cc2f0985e3d8651215e5d24c1fcc3036994fa7cc495a5091a2c85ece2aff9 SHA512 7805531f73d23ecfff3439770e62d387f4254a444875670d53a0a739323e5d4d8f8fcc478f8936ee1ae8aff3e0229549e47c01c606365a8ce060dd5c503e87da WHIRLPOOL 8e54e79219f89640162673da471a02ee8a39bb884e2376a79a09226462903185b49a771fef51ceca54c4dd42a110ee1214db6dbf94235a156a17d6c597634c3d
+DIST xen-security-patches-26.tar.xz 8276 SHA256 2a21ec429f8952875f7d95f24697600e606326f1a16d5622cee73628cd0401c1 SHA512 f54fc7e720a70258263d29cc482b8269386818ad75792de87b0d0357fdb6af81f2102e5983100db47563435fa28f875a84e8c6d73d44797aadaf0c469d9fb0ec WHIRLPOOL b31667d8415dc1fbcd60160fdbc2fe0ad4de9bd2171fda875f5585b8d7821c4c035b029dbf382abacf4b6be745aeeb708f419fdcabdd86f78ff1c13703802e3f
+EBUILD xen-4.7.2-r1.ebuild 5385 SHA256 4378b88ad0cbc515f40c2cf1151281a77678799c96d932e25b75682510c93e99 SHA512 8eb417f766c4c07c80ec3ff53734f3c24d703ef3ce99dad0052dbd5b63232cf66e22470b9779e45ee6662e4057c78d13a3b01d9d7e5e7d8203bf78452cc08f3b WHIRLPOOL 90fd34819474f35141be31efc48f11a7838058cfe9b323ab46d0164bf7b5bca4ecd51694e7b2765a6e72b62b3dad8d4620252996263959ea4ba203ac74e1ae1e
+EBUILD xen-4.7.3.ebuild 5386 SHA256 74a72af9515f3ead828cc0906f754572a0a2b3fd5afefad45cdec4ac0508e744 SHA512 4f9b09496d2c6aafe5e5a6a50b8e3cc926856398ae46149e05a451f8ee2f615640fa3d2fb444d3a95ff3b00210f3249cd8828ec168b61e2466656ae5e7eb5a58 WHIRLPOOL f7d88913e532714664fa1f9eea03855b3bffcf5926bc0ba9401fa401c78fc2a9a056428886300a5d0549cad30c0cc35028bb386e92dfcf593af4ffc02d3610c8
+EBUILD xen-4.8.2.ebuild 5379 SHA256 78930fde5e11e655cf854cc23739e074b350e0b931716309e6c5aa48394db511 SHA512 79edc5c83b563b69851112afa2971f21ad2971fe62f4e7a5feafe3cb31abc866e8cb4156cf83ceb17a6f033fc5c23789be47f2cc5ebe7ce1a76d6db3e60dad01 WHIRLPOOL b0c85962342bef988cdeb945250d1f847c08c9b68c1a1fcb882eb0846e73b6ea2356fedad265aef5d6abc7776aaa0530dff4b02b179805fcc4ff05a749d46f38
+MISC ChangeLog 19246 SHA256 ae107ab371c71d67ccbbb373a29add15e6203ecd6e42fbbce8d37ece1b186fc9 SHA512 b51269964858e15797062599b5b0329686c202da6aeeefeb3f72bec596f35080221ce7591db7a662d973eb1e17d80af8de953a27e1df70e365b9538e1d311bef WHIRLPOOL 72136dd18b3e3341e0fdad7abe3d75f633588c800c647a7a165c5a11741d6c98e492d22eaae4da40ce1d105c96db4ee9071ed0955ef2c376bb0d2e4415581339
+MISC ChangeLog-2015 39538 SHA256 43b9fcb224880329df3962d7a0a5f67469d8a29677e9dcbc002e5e5d45b488df SHA512 0a23ab62077924f2daad976e7cb9a3f16de0c7b5eee9be874e4606168b495fe6d9a06245c7c6a375e93b411776f09b4c176de8f7f05ab9eef578b677f179e27d WHIRLPOOL 48ba9ac7cf44b1522d3846df5b917bfbe36839b60d9bee3b151aaad7ade953af73c2bb852c7b7181be8eff26a34ceddad5d97c323b9bd014ecb160daf53c5261
+MISC metadata.xml 417 SHA256 ac72572b8c5d519f16fa2b5d99c9a6f251e3e47137715d6e66995c459999d7a4 SHA512 2708f84b8a1508eebc96539993ae1bde4b921d4401229c221e2bee9a0cd643fdf1f854fcbba6033ed68667d0efb00c25222f4c68535a96f2200084d8d8759946 WHIRLPOOL 26d40c14a50ef9616878047f05ff6eb607cc1f67505f457020e84a69147e22e1fcc55c353c68cb5232db27573151cd53b4e89a5bd1d47554586f98178f5f4599
diff --git a/app-emulation/xen/files/xen-4.6-efi.patch b/app-emulation/xen/files/xen-4.6-efi.patch
new file mode 100644
index 000000000000..bf888def7d90
--- /dev/null
+++ b/app-emulation/xen/files/xen-4.6-efi.patch
@@ -0,0 +1,36 @@
+diff --git a/xen/Makefile b/xen/Makefile
+index 4c54e9b..a5cdccd 100644
+--- a/xen/Makefile
++++ b/xen/Makefile
+@@ -41,9 +41,15 @@ _install: Z=$(CONFIG_XEN_INSTALL_SUFFIX)
+ _install: $(TARGET)$(CONFIG_XEN_INSTALL_SUFFIX)
+ 	[ -d $(D)$(BOOT_DIR) ] || $(INSTALL_DIR) $(D)$(BOOT_DIR)
+ 	$(INSTALL_DATA) $(TARGET)$(Z) $(D)$(BOOT_DIR)/$(T)-$(XEN_FULLVERSION)$(Z)
+-	ln -f -s $(T)-$(XEN_FULLVERSION)$(Z) $(D)$(BOOT_DIR)/$(T)-$(XEN_VERSION).$(XEN_SUBVERSION)$(Z)
+-	ln -f -s $(T)-$(XEN_FULLVERSION)$(Z) $(D)$(BOOT_DIR)/$(T)-$(XEN_VERSION)$(Z)
+-	ln -f -s $(T)-$(XEN_FULLVERSION)$(Z) $(D)$(BOOT_DIR)/$(T)$(Z)
++	if [ 'x$(EFI_VENDOR)' == 'x' ]; then \
++		ln -f -s $(T)-$(XEN_FULLVERSION)$(Z) $(D)$(BOOT_DIR)/$(T)-$(XEN_VERSION).$(XEN_SUBVERSION)$(Z); \
++		ln -f -s $(T)-$(XEN_FULLVERSION)$(Z) $(D)$(BOOT_DIR)/$(T)-$(XEN_VERSION)$(Z); \
++		ln -f -s $(T)-$(XEN_FULLVERSION)$(Z) $(D)$(BOOT_DIR)/$(T)$(Z); \
++	else \
++		$(INSTALL_DATA) $(TARGET)$(Z) $(D)$(BOOT_DIR)/$(T)-$(XEN_VERSION).$(XEN_SUBVERSION)$(Z); \
++		$(INSTALL_DATA) $(TARGET)$(Z) $(D)$(BOOT_DIR)/$(T)-$(XEN_VERSION)$(Z); \
++		$(INSTALL_DATA) $(TARGET)$(Z) $(D)$(BOOT_DIR)/$(T)$(Z); \
++	fi;
+ 	[ -d "$(D)$(DEBUG_DIR)" ] || $(INSTALL_DIR) $(D)$(DEBUG_DIR)
+ 	$(INSTALL_DATA) $(TARGET)-syms $(D)$(DEBUG_DIR)/$(T)-syms-$(XEN_FULLVERSION)
+ 	if [ -r $(TARGET).efi -a -n '$(EFI_DIR)' ]; then \
+diff --git a/xen/arch/x86/Makefile b/xen/arch/x86/Makefile
+index 5f24951..4ec0ee2 100644
+--- a/xen/arch/x86/Makefile
++++ b/xen/arch/x86/Makefile
+@@ -116,7 +116,7 @@ $(TARGET)-syms: prelink.o xen.lds $(BASEDIR)/common/symbols-dummy.o
+ 	    $(@D)/.$(@F).1.o -o $@
+ 	rm -f $(@D)/.$(@F).[0-9]*
+ 
+-EFI_LDFLAGS = $(patsubst -m%,-mi386pep,$(LDFLAGS)) --subsystem=10
++EFI_LDFLAGS = -mi386pep $(patsubst -m%,-mi386pep,$(LDFLAGS)) --subsystem=10
+ EFI_LDFLAGS += --image-base=$(1) --stack=0,0 --heap=0,0 --strip-debug
+ EFI_LDFLAGS += --section-alignment=0x200000 --file-alignment=0x20
+ EFI_LDFLAGS += --major-image-version=$(XEN_VERSION)
diff --git a/app-emulation/xen/metadata.xml b/app-emulation/xen/metadata.xml
new file mode 100644
index 000000000000..f69cd9e4d539
--- /dev/null
+++ b/app-emulation/xen/metadata.xml
@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
+<pkgmetadata>
+	<maintainer type="project">
+		<email>xen@gentoo.org</email>
+		<name>Gentoo Xen Project</name>
+	</maintainer>
+	<use>
+		<flag name="flask">Enable the Flask XSM module from NSA</flag>
+		<flag name="efi">Adds efi boot support, requires LDFLAG -melf_x86_64 for amd64</flag>
+	</use>
+</pkgmetadata>
diff --git a/app-emulation/xen/xen-4.7.2-r1.ebuild b/app-emulation/xen/xen-4.7.2-r1.ebuild
new file mode 100644
index 000000000000..ae2733f74967
--- /dev/null
+++ b/app-emulation/xen/xen-4.7.2-r1.ebuild
@@ -0,0 +1,192 @@
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=5
+
+PYTHON_COMPAT=( python2_7 )
+
+inherit eutils multilib mount-boot flag-o-matic python-any-r1 toolchain-funcs
+
+MY_PV=${PV/_/-}
+MY_P=${PN}-${PV/_/-}
+
+if [[ $PV == *9999 ]]; then
+	inherit git-r3
+	KEYWORDS="amd64 x86"
+	EGIT_REPO_URI="git://xenbits.xen.org/xen.git"
+	SRC_URI=""
+else
+	KEYWORDS="amd64 ~arm x86"
+	UPSTREAM_VER=0
+	SECURITY_VER=26
+	GENTOO_VER=
+
+	[[ -n ${UPSTREAM_VER} ]] && \
+		UPSTREAM_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${P}-upstream-patches-${UPSTREAM_VER}.tar.xz"
+	[[ -n ${SECURITY_VER} ]] && \
+		SECURITY_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${PN}-security-patches-${SECURITY_VER}.tar.xz"
+	[[ -n ${GENTOO_VER} ]] && \
+		GENTOO_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${PN}-gentoo-patches-${GENTOO_VER}.tar.xz"
+	SRC_URI="http://bits.xensource.com/oss-xen/release/${MY_PV}/${MY_P}.tar.gz
+		${UPSTREAM_PATCHSET_URI}
+		${SECURITY_PATCHSET_URI}
+		${GENTOO_PATCHSET_URI}"
+fi
+
+DESCRIPTION="The Xen virtual machine monitor"
+HOMEPAGE="http://xen.org/"
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="custom-cflags debug efi flask"
+
+DEPEND="${PYTHON_DEPS}
+	efi? ( >=sys-devel/binutils-2.22[multitarget] )
+	!efi? ( >=sys-devel/binutils-2.22 )"
+RDEPEND=""
+PDEPEND="~app-emulation/xen-tools-${PV}"
+
+# no tests are available for the hypervisor
+# prevent the silliness of /usr/lib/debug/usr/lib/debug files
+# prevent stripping of the debug info from the /usr/lib/debug/xen-syms
+RESTRICT="test splitdebug strip"
+
+# Approved by QA team in bug #144032
+QA_WX_LOAD="boot/xen-syms-${PV}"
+
+REQUIRED_USE="arm? ( debug )"
+
+S="${WORKDIR}/${MY_P}"
+
+pkg_setup() {
+	python-any-r1_pkg_setup
+	if [[ -z ${XEN_TARGET_ARCH} ]]; then
+		if use amd64; then
+			export XEN_TARGET_ARCH="x86_64"
+		elif use arm; then
+			export XEN_TARGET_ARCH="arm32"
+		elif use arm64; then
+			export XEN_TARGET_ARCH="arm64"
+		else
+			die "Unsupported architecture!"
+		fi
+	fi
+
+	if use flask ; then
+		export "XSM_ENABLE=y"
+		export "FLASK_ENABLE=y"
+	fi
+}
+
+src_prepare() {
+	# Upstream's patchset
+	if [[ -n ${UPSTREAM_VER} ]]; then
+		EPATCH_SUFFIX="patch" \
+		EPATCH_FORCE="yes" \
+		EPATCH_OPTS="-p1" \
+			epatch "${WORKDIR}"/patches-upstream
+	fi
+
+	# Security patchset
+	if [[ -n ${SECURITY_VER} ]]; then
+	einfo "Try to apply Xen Security patch set"
+		# apply main xen patches
+		# Two parallel systems, both work side by side
+		# Over time they may concdense into one. This will suffice for now
+		EPATCH_SUFFIX="patch"
+		EPATCH_FORCE="yes"
+
+		source "${WORKDIR}"/patches-security/${PV}.conf
+
+		for i in ${XEN_SECURITY_MAIN}; do
+			epatch "${WORKDIR}"/patches-security/xen/$i
+		done
+	fi
+
+	# Gentoo's patchset
+	if [[ -n ${GENTOO_VER} ]]; then
+		EPATCH_SUFFIX="patch" \
+		EPATCH_FORCE="yes" \
+			epatch "${WORKDIR}"/patches-gentoo
+	fi
+
+	epatch "${FILESDIR}"/${PN}-4.6-efi.patch
+
+	# Drop .config
+	sed -e '/-include $(XEN_ROOT)\/.config/d' -i Config.mk || die "Couldn't	drop"
+
+	if use efi; then
+		export EFI_VENDOR="gentoo"
+		export EFI_MOUNTPOINT="boot"
+	fi
+
+	# if the user *really* wants to use their own custom-cflags, let them
+	if use custom-cflags; then
+		einfo "User wants their own CFLAGS - removing defaults"
+		# try and remove all the default custom-cflags
+		find "${S}" -name Makefile -o -name Rules.mk -o -name Config.mk -exec sed \
+			-e 's/CFLAGS\(.*\)=\(.*\)-O3\(.*\)/CFLAGS\1=\2\3/' \
+			-e 's/CFLAGS\(.*\)=\(.*\)-march=i686\(.*\)/CFLAGS\1=\2\3/' \
+			-e 's/CFLAGS\(.*\)=\(.*\)-fomit-frame-pointer\(.*\)/CFLAGS\1=\2\3/' \
+			-e 's/CFLAGS\(.*\)=\(.*\)-g3*\s\(.*\)/CFLAGS\1=\2 \3/' \
+			-e 's/CFLAGS\(.*\)=\(.*\)-O2\(.*\)/CFLAGS\1=\2\3/' \
+			-i {} \; || die "failed to re-set custom-cflags"
+	fi
+
+	# remove -Werror for gcc-4.6's sake
+	find "${S}" -name 'Makefile*' -o -name '*.mk' -o -name 'common.make' | \
+		xargs sed -i 's/ *-Werror */ /'
+	# not strictly necessary to fix this
+	sed -i 's/, "-Werror"//' "${S}/tools/python/setup.py" || die "failed to re-set setup.py"
+
+	# Bug #575868 converted to a sed statement, typo of one char
+	sed -e "s:granter’s:granter's:" -i xen/include/public/grant_table.h || die
+
+	epatch_user
+}
+
+src_configure() {
+	use arm && myopt="${myopt} CONFIG_EARLY_PRINTK=sun7i"
+
+	use debug && myopt="${myopt} debug=y"
+
+	if use custom-cflags; then
+		filter-flags -fPIE -fstack-protector
+		replace-flags -O3 -O2
+	else
+		unset CFLAGS
+		unset LDFLAGS
+		unset ASFLAGS
+	fi
+}
+
+src_compile() {
+	# Send raw LDFLAGS so that --as-needed works
+	emake V=1 CC="$(tc-getCC)" LDFLAGS="$(raw-ldflags)" LD="$(tc-getLD)" -C xen ${myopt}
+}
+
+src_install() {
+	local myopt
+	use debug && myopt="${myopt} debug=y"
+
+	# The 'make install' doesn't 'mkdir -p' the subdirs
+	if use efi; then
+		mkdir -p "${D}"${EFI_MOUNTPOINT}/efi/${EFI_VENDOR} || die
+	fi
+
+	emake LDFLAGS="$(raw-ldflags)" DESTDIR="${D}" -C xen ${myopt} install
+
+	# make install likes to throw in some extra EFI bits if it built
+	use efi || rm -rf "${D}/usr/$(get_libdir)/efi"
+}
+
+pkg_postinst() {
+	elog "Official Xen Guide and the unoffical wiki page:"
+	elog " https://wiki.gentoo.org/wiki/Xen"
+	elog " http://en.gentoo-wiki.com/wiki/Xen/"
+
+	use efi && einfo "The efi executable is installed in boot/efi/gentoo"
+
+	elog "You can optionally block the installation of /boot/xen-syms by an entry"
+	elog "in folder /etc/portage/env using the portage's feature INSTALL_MASK"
+	elog "e.g. echo ${msg} > /etc/portage/env/xen.conf"
+}
diff --git a/app-emulation/xen/xen-4.7.3.ebuild b/app-emulation/xen/xen-4.7.3.ebuild
new file mode 100644
index 000000000000..c9c4f37aa171
--- /dev/null
+++ b/app-emulation/xen/xen-4.7.3.ebuild
@@ -0,0 +1,192 @@
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=5
+
+PYTHON_COMPAT=( python2_7 )
+
+inherit eutils multilib mount-boot flag-o-matic python-any-r1 toolchain-funcs
+
+MY_PV=${PV/_/-}
+MY_P=${PN}-${PV/_/-}
+
+if [[ $PV == *9999 ]]; then
+	inherit git-r3
+	KEYWORDS="amd64 x86"
+	EGIT_REPO_URI="git://xenbits.xen.org/xen.git"
+	SRC_URI=""
+else
+	KEYWORDS="amd64 ~arm ~x86"
+	UPSTREAM_VER=
+	SECURITY_VER=
+	GENTOO_VER=
+
+	[[ -n ${UPSTREAM_VER} ]] && \
+		UPSTREAM_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${P}-upstream-patches-${UPSTREAM_VER}.tar.xz"
+	[[ -n ${SECURITY_VER} ]] && \
+		SECURITY_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${PN}-security-patches-${SECURITY_VER}.tar.xz"
+	[[ -n ${GENTOO_VER} ]] && \
+		GENTOO_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${PN}-gentoo-patches-${GENTOO_VER}.tar.xz"
+	SRC_URI="https://downloads.xenproject.org/release/xen/${MY_PV}/${MY_P}.tar.gz
+		${UPSTREAM_PATCHSET_URI}
+		${SECURITY_PATCHSET_URI}
+		${GENTOO_PATCHSET_URI}"
+fi
+
+DESCRIPTION="The Xen virtual machine monitor"
+HOMEPAGE="http://xen.org/"
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="custom-cflags debug efi flask"
+
+DEPEND="${PYTHON_DEPS}
+	efi? ( >=sys-devel/binutils-2.22[multitarget] )
+	!efi? ( >=sys-devel/binutils-2.22 )"
+RDEPEND=""
+PDEPEND="~app-emulation/xen-tools-${PV}"
+
+# no tests are available for the hypervisor
+# prevent the silliness of /usr/lib/debug/usr/lib/debug files
+# prevent stripping of the debug info from the /usr/lib/debug/xen-syms
+RESTRICT="test splitdebug strip"
+
+# Approved by QA team in bug #144032
+QA_WX_LOAD="boot/xen-syms-${PV}"
+
+REQUIRED_USE="arm? ( debug )"
+
+S="${WORKDIR}/${MY_P}"
+
+pkg_setup() {
+	python-any-r1_pkg_setup
+	if [[ -z ${XEN_TARGET_ARCH} ]]; then
+		if use amd64; then
+			export XEN_TARGET_ARCH="x86_64"
+		elif use arm; then
+			export XEN_TARGET_ARCH="arm32"
+		elif use arm64; then
+			export XEN_TARGET_ARCH="arm64"
+		else
+			die "Unsupported architecture!"
+		fi
+	fi
+
+	if use flask ; then
+		export "XSM_ENABLE=y"
+		export "FLASK_ENABLE=y"
+	fi
+}
+
+src_prepare() {
+	# Upstream's patchset
+	if [[ -n ${UPSTREAM_VER} ]]; then
+		EPATCH_SUFFIX="patch" \
+		EPATCH_FORCE="yes" \
+		EPATCH_OPTS="-p1" \
+			epatch "${WORKDIR}"/patches-upstream
+	fi
+
+	# Security patchset
+	if [[ -n ${SECURITY_VER} ]]; then
+	einfo "Try to apply Xen Security patch set"
+		# apply main xen patches
+		# Two parallel systems, both work side by side
+		# Over time they may concdense into one. This will suffice for now
+		EPATCH_SUFFIX="patch"
+		EPATCH_FORCE="yes"
+
+		source "${WORKDIR}"/patches-security/${PV}.conf
+
+		for i in ${XEN_SECURITY_MAIN}; do
+			epatch "${WORKDIR}"/patches-security/xen/$i
+		done
+	fi
+
+	# Gentoo's patchset
+	if [[ -n ${GENTOO_VER} ]]; then
+		EPATCH_SUFFIX="patch" \
+		EPATCH_FORCE="yes" \
+			epatch "${WORKDIR}"/patches-gentoo
+	fi
+
+	epatch "${FILESDIR}"/${PN}-4.6-efi.patch
+
+	# Drop .config
+	sed -e '/-include $(XEN_ROOT)\/.config/d' -i Config.mk || die "Couldn't	drop"
+
+	if use efi; then
+		export EFI_VENDOR="gentoo"
+		export EFI_MOUNTPOINT="boot"
+	fi
+
+	# if the user *really* wants to use their own custom-cflags, let them
+	if use custom-cflags; then
+		einfo "User wants their own CFLAGS - removing defaults"
+		# try and remove all the default custom-cflags
+		find "${S}" -name Makefile -o -name Rules.mk -o -name Config.mk -exec sed \
+			-e 's/CFLAGS\(.*\)=\(.*\)-O3\(.*\)/CFLAGS\1=\2\3/' \
+			-e 's/CFLAGS\(.*\)=\(.*\)-march=i686\(.*\)/CFLAGS\1=\2\3/' \
+			-e 's/CFLAGS\(.*\)=\(.*\)-fomit-frame-pointer\(.*\)/CFLAGS\1=\2\3/' \
+			-e 's/CFLAGS\(.*\)=\(.*\)-g3*\s\(.*\)/CFLAGS\1=\2 \3/' \
+			-e 's/CFLAGS\(.*\)=\(.*\)-O2\(.*\)/CFLAGS\1=\2\3/' \
+			-i {} \; || die "failed to re-set custom-cflags"
+	fi
+
+	# remove -Werror for gcc-4.6's sake
+	find "${S}" -name 'Makefile*' -o -name '*.mk' -o -name 'common.make' | \
+		xargs sed -i 's/ *-Werror */ /'
+	# not strictly necessary to fix this
+	sed -i 's/, "-Werror"//' "${S}/tools/python/setup.py" || die "failed to re-set setup.py"
+
+	# Bug #575868 converted to a sed statement, typo of one char
+	sed -e "s:granter’s:granter's:" -i xen/include/public/grant_table.h || die
+
+	epatch_user
+}
+
+src_configure() {
+	use arm && myopt="${myopt} CONFIG_EARLY_PRINTK=sun7i"
+
+	use debug && myopt="${myopt} debug=y"
+
+	if use custom-cflags; then
+		filter-flags -fPIE -fstack-protector
+		replace-flags -O3 -O2
+	else
+		unset CFLAGS
+		unset LDFLAGS
+		unset ASFLAGS
+	fi
+}
+
+src_compile() {
+	# Send raw LDFLAGS so that --as-needed works
+	emake V=1 CC="$(tc-getCC)" LDFLAGS="$(raw-ldflags)" LD="$(tc-getLD)" -C xen ${myopt}
+}
+
+src_install() {
+	local myopt
+	use debug && myopt="${myopt} debug=y"
+
+	# The 'make install' doesn't 'mkdir -p' the subdirs
+	if use efi; then
+		mkdir -p "${D}"${EFI_MOUNTPOINT}/efi/${EFI_VENDOR} || die
+	fi
+
+	emake LDFLAGS="$(raw-ldflags)" DESTDIR="${D}" -C xen ${myopt} install
+
+	# make install likes to throw in some extra EFI bits if it built
+	use efi || rm -rf "${D}/usr/$(get_libdir)/efi"
+}
+
+pkg_postinst() {
+	elog "Official Xen Guide and the unoffical wiki page:"
+	elog " https://wiki.gentoo.org/wiki/Xen"
+	elog " http://en.gentoo-wiki.com/wiki/Xen/"
+
+	use efi && einfo "The efi executable is installed in boot/efi/gentoo"
+
+	elog "You can optionally block the installation of /boot/xen-syms by an entry"
+	elog "in folder /etc/portage/env using the portage's feature INSTALL_MASK"
+	elog "e.g. echo ${msg} > /etc/portage/env/xen.conf"
+}
diff --git a/app-emulation/xen/xen-4.8.2.ebuild b/app-emulation/xen/xen-4.8.2.ebuild
new file mode 100644
index 000000000000..924c8cb2fb94
--- /dev/null
+++ b/app-emulation/xen/xen-4.8.2.ebuild
@@ -0,0 +1,192 @@
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=5
+
+PYTHON_COMPAT=( python2_7 )
+
+inherit eutils multilib mount-boot flag-o-matic python-any-r1 toolchain-funcs
+
+MY_PV=${PV/_/-}
+MY_P=${PN}-${PV/_/-}
+
+if [[ $PV == *9999 ]]; then
+	inherit git-r3
+	KEYWORDS=""
+	EGIT_REPO_URI="git://xenbits.xen.org/xen.git"
+	SRC_URI=""
+else
+	KEYWORDS="~amd64 ~arm -x86"
+	UPSTREAM_VER=0
+	SECURITY_VER=
+	GENTOO_VER=
+
+	[[ -n ${UPSTREAM_VER} ]] && \
+		UPSTREAM_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${P}-upstream-patches-${UPSTREAM_VER}.tar.xz"
+	[[ -n ${SECURITY_VER} ]] && \
+		SECURITY_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${PN}-security-patches-${SECURITY_VER}.tar.xz"
+	[[ -n ${GENTOO_VER} ]] && \
+		GENTOO_PATCHSET_URI="https://dev.gentoo.org/~dlan/distfiles/${PN}-gentoo-patches-${GENTOO_VER}.tar.xz"
+	SRC_URI="https://downloads.xenproject.org/release/xen/${MY_PV}/${MY_P}.tar.gz
+		${UPSTREAM_PATCHSET_URI}
+		${SECURITY_PATCHSET_URI}
+		${GENTOO_PATCHSET_URI}"
+fi
+
+DESCRIPTION="The Xen virtual machine monitor"
+HOMEPAGE="http://xen.org/"
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="custom-cflags debug efi flask"
+
+DEPEND="${PYTHON_DEPS}
+	efi? ( >=sys-devel/binutils-2.22[multitarget] )
+	!efi? ( >=sys-devel/binutils-2.22 )"
+RDEPEND=""
+PDEPEND="~app-emulation/xen-tools-${PV}"
+
+# no tests are available for the hypervisor
+# prevent the silliness of /usr/lib/debug/usr/lib/debug files
+# prevent stripping of the debug info from the /usr/lib/debug/xen-syms
+RESTRICT="test splitdebug strip"
+
+# Approved by QA team in bug #144032
+QA_WX_LOAD="boot/xen-syms-${PV}"
+
+REQUIRED_USE="arm? ( debug )"
+
+S="${WORKDIR}/${MY_P}"
+
+pkg_setup() {
+	python-any-r1_pkg_setup
+	if [[ -z ${XEN_TARGET_ARCH} ]]; then
+		if use amd64; then
+			export XEN_TARGET_ARCH="x86_64"
+		elif use arm; then
+			export XEN_TARGET_ARCH="arm32"
+		elif use arm64; then
+			export XEN_TARGET_ARCH="arm64"
+		else
+			die "Unsupported architecture!"
+		fi
+	fi
+
+	if use flask ; then
+		export "XSM_ENABLE=y"
+		export "FLASK_ENABLE=y"
+	fi
+}
+
+src_prepare() {
+	# Upstream's patchset
+	if [[ -n ${UPSTREAM_VER} ]]; then
+		EPATCH_SUFFIX="patch" \
+		EPATCH_FORCE="yes" \
+		EPATCH_OPTS="-p1" \
+			epatch "${WORKDIR}"/patches-upstream
+	fi
+
+	# Security patchset
+	if [[ -n ${SECURITY_VER} ]]; then
+	einfo "Try to apply Xen Security patch set"
+		# apply main xen patches
+		# Two parallel systems, both work side by side
+		# Over time they may concdense into one. This will suffice for now
+		EPATCH_SUFFIX="patch"
+		EPATCH_FORCE="yes"
+
+		source "${WORKDIR}"/patches-security/${PV}.conf
+
+		for i in ${XEN_SECURITY_MAIN}; do
+			epatch "${WORKDIR}"/patches-security/xen/$i
+		done
+	fi
+
+	# Gentoo's patchset
+	if [[ -n ${GENTOO_VER} ]]; then
+		EPATCH_SUFFIX="patch" \
+		EPATCH_FORCE="yes" \
+			epatch "${WORKDIR}"/patches-gentoo
+	fi
+
+	epatch "${FILESDIR}"/${PN}-4.6-efi.patch
+
+	# Drop .config
+	sed -e '/-include $(XEN_ROOT)\/.config/d' -i Config.mk || die "Couldn't	drop"
+
+	if use efi; then
+		export EFI_VENDOR="gentoo"
+		export EFI_MOUNTPOINT="boot"
+	fi
+
+	# if the user *really* wants to use their own custom-cflags, let them
+	if use custom-cflags; then
+		einfo "User wants their own CFLAGS - removing defaults"
+		# try and remove all the default custom-cflags
+		find "${S}" -name Makefile -o -name Rules.mk -o -name Config.mk -exec sed \
+			-e 's/CFLAGS\(.*\)=\(.*\)-O3\(.*\)/CFLAGS\1=\2\3/' \
+			-e 's/CFLAGS\(.*\)=\(.*\)-march=i686\(.*\)/CFLAGS\1=\2\3/' \
+			-e 's/CFLAGS\(.*\)=\(.*\)-fomit-frame-pointer\(.*\)/CFLAGS\1=\2\3/' \
+			-e 's/CFLAGS\(.*\)=\(.*\)-g3*\s\(.*\)/CFLAGS\1=\2 \3/' \
+			-e 's/CFLAGS\(.*\)=\(.*\)-O2\(.*\)/CFLAGS\1=\2\3/' \
+			-i {} \; || die "failed to re-set custom-cflags"
+	fi
+
+	# remove -Werror for gcc-4.6's sake
+	find "${S}" -name 'Makefile*' -o -name '*.mk' -o -name 'common.make' | \
+		xargs sed -i 's/ *-Werror */ /'
+	# not strictly necessary to fix this
+	sed -i 's/, "-Werror"//' "${S}/tools/python/setup.py" || die "failed to re-set setup.py"
+
+	# Bug #575868 converted to a sed statement, typo of one char
+	sed -e "s:granter’s:granter's:" -i xen/include/public/grant_table.h || die
+
+	epatch_user
+}
+
+src_configure() {
+	use arm && myopt="${myopt} CONFIG_EARLY_PRINTK=sun7i"
+
+	use debug && myopt="${myopt} debug=y"
+
+	if use custom-cflags; then
+		filter-flags -fPIE -fstack-protector
+		replace-flags -O3 -O2
+	else
+		unset CFLAGS
+		unset LDFLAGS
+		unset ASFLAGS
+	fi
+}
+
+src_compile() {
+	# Send raw LDFLAGS so that --as-needed works
+	emake V=1 CC="$(tc-getCC)" LDFLAGS="$(raw-ldflags)" LD="$(tc-getLD)" -C xen ${myopt}
+}
+
+src_install() {
+	local myopt
+	use debug && myopt="${myopt} debug=y"
+
+	# The 'make install' doesn't 'mkdir -p' the subdirs
+	if use efi; then
+		mkdir -p "${D}"${EFI_MOUNTPOINT}/efi/${EFI_VENDOR} || die
+	fi
+
+	emake LDFLAGS="$(raw-ldflags)" DESTDIR="${D}" -C xen ${myopt} install
+
+	# make install likes to throw in some extra EFI bits if it built
+	use efi || rm -rf "${D}/usr/$(get_libdir)/efi"
+}
+
+pkg_postinst() {
+	elog "Official Xen Guide and the unoffical wiki page:"
+	elog " https://wiki.gentoo.org/wiki/Xen"
+	elog " http://en.gentoo-wiki.com/wiki/Xen/"
+
+	use efi && einfo "The efi executable is installed in boot/efi/gentoo"
+
+	elog "You can optionally block the installation of /boot/xen-syms by an entry"
+	elog "in folder /etc/portage/env using the portage's feature INSTALL_MASK"
+	elog "e.g. echo ${msg} > /etc/portage/env/xen.conf"
+}