gentoo resync : 14.07.2018

3 files changed, 0 insertions, 297 deletions

diff --git a/app-admin/tripwire/files/tripwire b/app-admin/tripwire/files/tripwire
deleted file mode 100644
index 8f0f23f3e2d5..000000000000
--- a/app-admin/tripwire/files/tripwire
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-HOST_NAME=`uname -n`
-if [ ! -e /var/lib/tripwire/${HOST_NAME}.twd ] ; then
-	echo "****    Error: Tripwire database for ${HOST_NAME} not found.  ****"
-	echo "**** Check tripwire.txt file for instructions or install      ****"
-	echo "**** app-admin/mktwpol package (if you used the \"tools\"  ****"
-	echo "**** USE flag, this has been done for you already.            ****"
-else
-        test -f /etc/tripwire/tw.cfg &&  /usr/sbin/tripwire --check --quiet
-fi
diff --git a/app-admin/tripwire/files/tripwire.txt b/app-admin/tripwire/files/tripwire.txt
deleted file mode 100644
index 4f47f8bd8196..000000000000
--- a/app-admin/tripwire/files/tripwire.txt
+++ /dev/null
@@ -1,272 +0,0 @@
-tripwire.txt					v. 11 Sept 2013
-
-Introduction to Tripwire, with Gentoo-specific installation information
-
-Tripwire software can monitor the integrity of critical system files and
-directories by identifying specified changes made to selected system
-files and directories. Configure Tripwire software to monitor your
-system in the way that is best for you.
-
-Tripwire software works by comparing files and directories against a
-defined baseline, stored in a tripwire-created database. Tripwire
-generates the baseline by taking a "snapshot" of specified files and
-directories. Tripwire software then compares the current system against
-the baseline and reports modifications, additions, or deletions. Use
-Tripwire software for system security, intrusion detection, damage
-assessment, and recovery forensics.
-
-
-To set-up Tripwire Configuration
-
-The Tripwire tarball installs the basic program files needed to run the
-software.  However, this installation does not prepare the configuration
-files that Tripwire needs to perform correctly. After you install the
-tripwire executable files and example configuration, you must:
-
-1. Review and perhaps edit the plain-text tripwire configuration file
-   (/etc/tripwire/twcfg.txt) with a text editor, if desired.
-
-2. Either run a configuration script (twsetup.sh from Gentoo's mktwpol
-   package, or tripwire-setup-keyfiles from Red Hat, or deprecated
-   twinstall.sh, also from Red Hat), or run the program `twadmin` with
-   the correct command line switches to make key files and encrypt/sign
-   the tripwire configuration file.
-
-   Make site key file
-   ------------------
-   `twadmin --generate-keys -S /etc/tripwire/site.key`
-
-   Make local key file
-   -------------------
-   `twadmin --generate-keys -L /etc/tripwire/$HOSTNAME-local.key`
-
-   Make mandatory signed tripwire configuration file (tw.cfg)
-   ----------------------------------------------------------
-   `twadmin --create-cfgfile -S /etc/tripwire/site.key /etc/tripwire/twcfg.txt`
-
-Note: Once encrypted/signed, the configuration file, tw.cfg, must not be
-renamed or moved.  The plain-text tripwire configuration file (twcfg.txt)
-should be deleted.  It can be recreated with `twadmin --print-cfgfile`
-
-3. Make a plain-text policy file.  The use of the name twpol.txt is
-   common, but the name of this file is not defined or used by Tripwire,
-   other than preparation of the encrypted/signed policy file.
-
-   To make the plain-text policy file, either run a policy file generator
-   (for example, mktwpol.sh from Gentoo's mktwpol package), or edit the
-   plain-text policy file (twpol-GENERIC.txt, or twpol.txt, or similar)
-   with a text editor.  The plain-text policy file should not refer to
-   any non-existent file or directory.
-
-   If you edit twpol-GENERIC.txt to act as your plain-text policy file,
-   provide your system's HOSTNAME at line 61.  If you don't provide
-   the correct HOSTNAME, a tripwire inspection of the target computer's
-   filesystem will fail to check the tripwire database file for changes.
-
-	TWDB=/var/lib/tripwire/YOUR_HOSTNAME.twd;
-
-4. Convert the plain-text policy file into the encrypted/signed form
-   that tripwire will refer to as it examines the files on the target
-   computer's filesystem.  The default filename for the encrypted/signed
-   policy file is defined in the tripwire configuration file (tw.cfg)
-   and is usually tw.pol.  The encryption/signing of plain-text twpol.txt
-   is done with yet another `twadmin` command line.
-
-   Make mandatory encrypted/signed system inspection policy file
-   --------------------------------------------------------------
-   `twadmin -m P -c /etc/tripwire/tw.cfg /etc/tripwire/twpol.txt`
-
-Note: If you modify the plain-text policy file after running the
-configuration script, you must re-sign the plain-text policy file before
-initializing the database file.  Tripwire baseline database creation and
-inspections refer to the encrypted/signed policy file, not to the
-plain-text policy file.
-
-Note: The plain-text tripwire policy file (twpol.txt) should be deleted.
-It can be recreated with `twadmin --print-polfile`
-
-5. Initialize the Tripwire database file.
-
-   Record current file attributes in the tripwire database
-   -------------------------------------------------------
-   `tripwire --init -c /etc/tripwire/tw.cfg`
-
-Note: Tripwire might issue some "Warning: File system error" errors,
-and appear to hang.  But as long as it follows with "### Continuing...",
-it is still working.
-
-6. Run the first integrity check.
-
-   `tripwire --check -c /etc/tripwire/tw.cfg`
-
-Note: The use of "-c /etc/tripwire/tw.cfg" is not required if Tripwire
-uses the default tripwire configuration directory and file names.  If
-you defer to tripwire default filenames, then updating a text policy
-file into a tripwire database, and running an integrity check, can be
-done with these commands:
-
-   `twadmin --create-polfile /etc/tripwire/twpol.txt`
-   `tripwire --init`
-   `tripwire --check`
-
-Modifying the Policy File
-
-How Tripwire software checks your system is specified in the Tripwire
-plain-text policy file (twpol.txt).  A default policy file is included in
-the Tripwire software installation.  This policy file should be tailored
-to fit your particular system.  Tailoring the policy file is necessary
-to take advantage of Tripwire software's ability to monitor changes on
-your system.
-
-The plain-text policy file is usually located at /etc/tripwire/twpol.txt.
-An example policy file (located at /etc/tripwire/twpol-GENERIC.txt, or
-at /usr/share/doc/tripwire-VER#-REL#/policyguide.txt) is included to
-help you learn the policy language.  Read the sample policy files and
-the comments in the sample policy file to learn the policy language.
-
-After you modify the plain-text policy file, don't forget!
-
- encrypt/sign using `twadmin --create-polfile /etc/tripwire/twpol.txt`
-
-
-Selecting Passphrases
-
-Tripwire files are encrypted/signed using site or local keys. These keys
-are protected by passphrases. When selecting passphrases, the following
-recommendations apply:
-
-Use at least eight alphanumeric and symbolic characters for each
-passphrase. The maximum length of a passphrase is 1023 characters.
-Quotes should not be used as passphrase characters.
-
-Assign a unique passphrase for the site key. The site key passphrase
-protects the site key, which is used to sign Tripwire software
-configuration and policy files. Assign a unique passphrase for the local
-key. The local key signs the Tripwire baseline database file. The local
-key may sign the Tripwire report files also.
-
-Store the passphrases in a secure location. There is no way to remove
-encryption from a signed file if you forget your passphrase and lost the
-key files.  If you forget the passphrases, the files are unusable. In
-that case you must create new key files and the baseline database.
-
-
-Initializing the Database
-
-In Database Initialization mode, Tripwire software builds a database of
-filesystem objects based on the rules in the policy file. This database
-serves as the baseline for integrity checks. The syntax for Database
-Initialization mode is:
-
-  `tripwire --init -c /etc/tripwire/tw.cfg`
-
-
-Running an Integrity Check
-
-The Integrity Check mode compares the current file system objects with
-their properties recorded in the Tripwire database. Violations are
-printed to stdout. The report file is saved and can later be accessed by
-twprint. An email option enables you to send email. The syntax for
-Integrity Check mode is:
-
-  `tripwire --check -c /etc/tripwire/tw.cfg`
-
-
-Printing Reports - twprint Print Report Mode
-
-The twprint --print-report mode prints the contents of a Tripwire
-report. If you do not specify a report with the --twrfile or -r
-command-line argument, the default report file specified by the
-configuration file REPORTFILE variable is used.
-
-Example: On a machine named LIGHTHOUSE, the command could be:
-
-  `twprint -m r --twrfile LIGHTHOUSE-19990622-021212.twr`
-
-
-Updating the Database after an Integrity Check
-
-Database Update mode enables you to update the Tripwire database after
-an integrity check if you determine that the violations discovered are
-valid. This update process saves time by enabling you to update the
-database without having to re-initialize it. It also enables selective
-updating, which cannot be done through re-initialization. The syntax for
-Database Update mode is:
-
-  `tripwire --update`
-
-
-Updating the Policy File
-
-Change the way that Tripwire software scans the system by changing the
-rules in the policy file.  You can then update the database without a
-complete re-initialization. This saves a significant amount of time and
-preserves security by keeping the policy file synchronized with the
-database it uses.  The syntax for Policy Update mode is:
-
-  `tripwire  --update-policy`
-
-
-Testing email functions
-
-Test mode tests the software's email notification system, using the
-settings currently specified in the configuration file. The syntax for
-Email Test Reporting mode is:
-
-  `tripwire  --test`
-
-
-Tripwire Components
-
-The policy file begins as a text file containing comments, rules,
-directives, and variables. These dictate the way Tripwire software
-checks your system. Each rule in the policy file specifies a system
-object to be monitored. Rules also describe which changes to the object
-to report, and which to ignore.
-
-System objects are the files and directories you wish to monitor. Each
-object is identified by an object name. A property refers to a single
-characteristic of an object that Tripwire software can monitor.
-Directives control conditional processing of sets of rules in a policy
-file. During installation, the text policy file is encrypted/signed and
-renamed, and becomes the active policy file.
-
-The database file is an important component of Tripwire software. When
-first installed, Tripwire software uses the policy file rules to create
-the database file. The database file is a baseline "snapshot" of the
-system in a known secure state. Tripwire software compares this baseline
-against the current system to determine what changes have occurred. This
-is an integrity check.
-
-When you perform an integrity check, Tripwire software produces report
-files. Report files summarize any changes that violated the policy file
-rules during the integrity check. You can view the report file in a
-variety of formats, at varying levels of detail.
-
-The Tripwire configuration file stores system-specific information, such
-as the location of Tripwire data files. Tripwire software generates some
-of the configuration file information during installation. The system
-administrator can change parameters in the configuration file at any
-time. The configuration file variables POLFILE, DBFILE, REPORTFILE,
-SITEKEYFILE, and LOCALKEYFILE specify where the policy file, database
-file, report files, and site and local key files reside. These variables
-must be defined or the configuration file is invalid. If any of these
-variables are undefined, an error occurs on execution of Tripwire
-software and the program exits.
-
-
-Tripwire Help
-
-All Tripwire commands support the help arguments.
-
-Example: To get help with Create Configuration File mode, type:
-
-  `twadmin --help --create-cfgfile`
-
-  -?			Display usage and version information
-  --help		Display all command modes
-  --help all		Display help for all command modes
-  --help [mode]		Display help for current command mode
-  --version		Display version information
-
-We recommend you read the Tripwire Release Notes and README file.
diff --git a/app-admin/tripwire/files/twcfg.txt b/app-admin/tripwire/files/twcfg.txt
deleted file mode 100644
index 9cf39bcc01e4..000000000000
--- a/app-admin/tripwire/files/twcfg.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-ROOT                   =/usr/sbin
-POLFILE                =/etc/tripwire/tw.pol
-DBFILE                 =/var/lib/tripwire/$(HOSTNAME).twd
-REPORTFILE             =/var/lib/tripwire/report/$(HOSTNAME)-$(DATE).twr
-SITEKEYFILE            =/etc/tripwire/site.key
-LOCALKEYFILE           =/etc/tripwire/$(HOSTNAME)-local.key
-EDITOR                 =/bin/nano
-LATEPROMPTING          =false
-LOOSEDIRECTORYCHECKING =false
-MAILNOVIOLATIONS       =true
-EMAILREPORTLEVEL       =3
-REPORTLEVEL            =3
-MAILMETHOD             =SENDMAIL
-SYSLOGREPORTING        =false
-MAILPROGRAM            =/usr/lib/sendmail -oi -t