repo cleanup...drop old ebuilds, drop ebuilds already in portage tree

1 files changed, 0 insertions, 174 deletions

diff --git a/sys-kernel/compat-drivers/compat-drivers-3.8.ebuild b/sys-kernel/compat-drivers/compat-drivers-3.8.ebuild
deleted file mode 100644
index ab7c1a96..00000000
--- a/sys-kernel/compat-drivers/compat-drivers-3.8.ebuild
+++ /dev/null
@@ -1,174 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: $
-
-EAPI="5"
-
-# USE_EXPAND categories
-CPD_USE_EXPAND="wifi ethernet various"
-# These are officially supported
-CPD_USE_EXPAND_wifi="ath5k ath9k ath9k_ap ath9k_htc ath6kl b43 brcmsmac brcmfmac carl9170 rt2x00 wil6210 wl1251 wl12xx zd1211rw"
-
-# These are officially supported
-CPD_USE_EXPAND_ethernet="alx atl1 atl1c atl1e atl2"
-
-# These are officially supported
-CPD_USE_EXPAND_various="i915"
-
-inherit linux-mod linux-info versionator eutils compat-drivers-3.8-r1
-
-# upstream versioning, ex.: 3.7-rc1-6
-UPSTREAM_PVR="${PV//_/-}" && UPSTREAM_PVR="${UPSTREAM_PVR/-p/-}"
-# ex.: 3.7-rc1
-UPSTREAM_PV=${UPSTREAM_PVR%-*}
-
-DESCRIPTION="Stable kernel pre-release wifi subsystem backport"
-HOMEPAGE="http://backports.wiki.kernel.org"
-SRC_URI="mirror://kernel/linux/kernel/projects/backports/stable/v${UPSTREAM_PVR}/${PN}-${UPSTREAM_PVR}-1-u.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS=""
-
-IUSE="atheros_obey_crda debugfs debug-driver full-debug injection livecd loadmodules noleds pax_kernel"
-
-DEPEND="!net-wireless/compat-wireless-builder
-	!net-wireless/compat-wireless"
-RDEPEND="${DEPEND}
-	>=sys-kernel/linux-firmware-20110219
-	virtual/udev"
-
-S="${WORKDIR}/${PN}-${UPSTREAM_PVR}-1-u"
-
-RESTRICT="strip"
-
-CONFIG_CHECK="!DYNAMIC_FTRACE"
-
-pkg_setup() {
-	CONFIG_CHECK="~NET_SCHED"
-	CONFIG_CHECK="~IPW2200_PROMISCUOUS"
-	linux-mod_pkg_setup
-	kernel_is -lt 2 6 27 && die "kernel 2.6.27 or higher is required for compat drivers to be installed"
-	kernel_is -gt $(get_version_component_range 1) $(get_version_component_range 2) $(get_version_component_range 3) && die "The version of compat drivers you are trying to install contains older modules than your kernel. Failing before downgrading your system."
-
-	#these things are not optional
-	linux_chkconfig_module MAC80211 || die "CONFIG_MAC80211 must be built as a _module_ !"
-	linux_chkconfig_module CFG80211 || die "CONFIG_CFG80211 must be built as a _module_ !"
-	linux_chkconfig_module LIBIPW || ewarn "CONFIG_LIBIPW really should be set or there will be no WEXT compat"
-
-	if use compat_drivers_wifi_b43; then
-		linux_chkconfig_module SSB || die "You need to enable CONFIG_SSB or USE=-b43"
-	fi
-}
-
-src_prepare() {
-	if use pax_kernel; then
-		for gpatch in "${FILESDIR}"/3.8-grsec/*; do
-			epatch "${gpatch}"
-		done
-	fi
-	# upstream might want to see this
-	epatch "${FILESDIR}"/${PN}-3.8-bt_tty.patch
-	epatch "${FILESDIR}"/${PN}-3.8-ath6kl.patch
-
-	#mcgrof said prep for inclusion in compat-wireless.git but this causes issues
-	#find "${S}" -name Makefile | xargs sed -i -e 's/export CONFIG_/export CONFIG_COMPAT_/' -e 's/COMPAT_COMPAT_/COMPAT_/' -e 's/CONFIG_COMPAT_CHECK/CONFIG_CHECK/'
-	#sed -i -e 's/export CONFIG_/export CONFIG_COMPAT_/' -e 's/COMPAT_COMPAT_/COMPAT_/' "${S}"/config.mk
-
-	# CONFIG_CFG80211_REG_DEBUG=y
-	sed -i '/CFG80211_REG_DEBUG/s/^# *//' "${S}"/config.mk
-
-	#this patch ignores the regulatory settings of an atheros card and uses what CRDA thinks is right
-	if use atheros_obey_crda; then
-		ewarn "You have enabled atheros_obey_crda which doesn't do what you think."
-		ewarn "This use flag will cause the eeprom of the card to be ignored and force"
-		ewarn "world roaming on the device until crda provides a valid regdomain."
-		ewarn "Short version, this is not a way to break the law, this will automatically"
-		ewarn "make your card less functional unless you set a proper regdomain with iw/crda."
-		epatch "${FILESDIR}"/ath_regd_optional.patch
-	fi
-
-	if use injection; then
-		epatch "${FILESDIR}"/4002_mac80211-2.6.29-fix-tx-ctl-no-ack-retry-count.patch
-		epatch "${FILESDIR}"/4004_zd1211rw-2.6.28.patch
-	#	epatch "${FILESDIR}"/mac80211.compat08082009.wl_frag+ack_v1.patch
-	#	epatch "${FILESDIR}"/4013-runtime-enable-disable-of-mac80211-packet-injection.patch
-		epatch "${FILESDIR}"/ipw2200-inject.3.4.6.patch
-	fi
-	if use noleds; then
-		sed -ir 's/^\(export CONFIG_.*_LEDS=\)y$/\1n/' config.mk
-		epatch "${FILESDIR}/leds-disable-strict-${PV}.patch"
-	fi
-	use debug-driver && sed -i '/DEBUG=y/s/^# *//' "${S}"/config.mk
-	use debugfs && sed -i '/DEBUGFS/s/^# *//' "${S}"/config.mk
-	if use full-debug; then
-		if use debug-driver ; then
-			sed -i '/CONFIG=/s/^# *//' "${S}"/config.mk
-		else
-			ewarn "Enabling full-debug includes debug-driver."
-			sed -i '/DEBUG=/s/^# *//' "${S}"/config.mk
-		fi
-	fi
-
-	#avoid annoying ACCESS DENIED sandbox errors
-	sed -i "s/\${MAKE} -C \${KLIB_BUILD} kernelversion/echo ${KV_FULL}/g" compat/scripts/gen-compat-config.sh || die "sed failed"
-	sed -i "s/shell \$(MAKE) -C \$(KLIB_BUILD) kernelversion/echo ${KV_FULL}/g" config.mk || die "sed failed"
-	sed -i "s/make -C \$KLIB_BUILD kernelversion/echo ${KV_FULL}/g" scripts/gen-compat-autoconf.sh || die "sed failed"
-
-	# replace scripts/driver-select
-	# TODO: convince upstream to adopt this script
-	cp "${FILESDIR}/${PF}-driver-select" scripts/driver-select || \
-		die "Replacing driver-select failed"
-}
-
-src_compile() {
-	addpredict "${KERNEL_DIR}"
-	set_arch_to_kernel
-	emake KLIB_BUILD="${DESTDIR}"/lib/modules/"${KV_FULL}"/build || die "emake failed"
-}
-
-src_install() {
-	for file in $(find -name \*.ko); do
-		insinto "/lib/modules/${KV_FULL}/updates/$(dirname ${file})"
-		doins "${file}"
-	done
-	dosbin scripts/athenable scripts/b43load scripts/iwl-enable \
-		scripts/madwifi-unload scripts/athload scripts/iwl-load \
-		scripts/b43enable scripts/unload.sh
-
-	dodir /usr/lib/compat-wireless
-	exeinto /usr/lib/compat-wireless
-	doexe scripts/modlib.sh
-
-	dodoc README.md
-	dodir /$(get_libdir)/udev/rules.d/
-	insinto /$(get_libdir)/udev/rules.d/
-	doins udev/50-compat_firmware.rules
-	exeinto /$(get_libdir)/udev/
-	doexe udev/compat_firmware.sh
-}
-
-pkg_postinst() {
-	update_depmod
-	update_moduledb
-
-	if use !livecd; then
-		if use loadmodules; then
-			einfo "Attempting to unload modules..."
-			/usr/sbin/unload.sh 2>&1 | grep -E FATAL && ewarn "Unable to remove running modules, system may be unhappy, reboot HIGHLY recommended!"
-			einfo "Triggering automatic reload of needed modules..."
-			/sbin/udevadm trigger
-			einfo "We have attempted to load your new modules for you, this may fail horribly, or may just cause a network hiccup."
-			einfo "If you experience any issues reboot is the simplest course of action."
-		fi
-	fi
-	if use !loadmodules; then
-		einfo "You didn't USE=loadmodules but you can still attempt to switch to the new drivers without reboot."
-		einfo "Run 'unload.sh' then 'udevadm trigger' to cause udev to load the	needed drivers."
-		einfo "If unload.sh fails for some reason you should be able to simply reboot to fix everything and load the new modules."
-	fi
-}
-
-pkg_postrm() {
-	remove_moduledb
-}