diff options
Diffstat (limited to 'www-servers/boa/files/boa.conf')
-rw-r--r-- | www-servers/boa/files/boa.conf | 191 |
1 files changed, 191 insertions, 0 deletions
diff --git a/www-servers/boa/files/boa.conf b/www-servers/boa/files/boa.conf new file mode 100644 index 000000000000..a888ffc5427b --- /dev/null +++ b/www-servers/boa/files/boa.conf @@ -0,0 +1,191 @@ +# Boa v0.94 configuration file +# File format has not changed from 0.93 +# File format has changed little from 0.92 +# version changes are noted in the comments +# +# The Boa configuration file is parsed with a lex/yacc or flex/bison +# generated parser. If it reports an error, the line number will be +# provided; it should be easy to spot. The syntax of each of these +# rules is very simple, and they can occur in any order. Where possible +# these directives mimic those of NCSA httpd 1.3; I saw no reason to +# introduce gratuitous differences. + +# The "ServerRoot" is not in this configuration file. It can be compiled +# into the server (see defines.h) or specified on the command line with +# the -c option, for example: +# +# boa -c /usr/local/boa + + +# Port: The port Boa runs on. The default port for http servers is 80. +# If it is less than 1024, the server must be started as root. + +Port 80 + +# Listen: the Internet address to bind(2) to. If you leave it out, +# it takes the behavior before 0.93.17.2, which is to bind to all +# addresses (INADDR_ANY). You only get one "Listen" directive, +# if you want service on multiple IP addresses, you have three choices: +# 1. Run boa without a "Listen" directive +# a. All addresses are treated the same; makes sense if the addresses +# are localhost, ppp, and eth0. +# b. Use the VirtualHost directive below to point requests to different +# files. Should be good for a very large number of addresses (web +# hosting clients). +# 2. Run one copy of boa per IP address, each has its own configuration +# with a "Listen" directive. No big deal up to a few tens of addresses. +# Nice separation between clients. +# The name you provide gets run through inet_aton(3), so you have to use dotted +# quad notation. This configuration is too important to trust some DNS. + +#Listen 192.68.0.5 + +# User: The name or UID the server should run as. +# Group: The group name or GID the server should run as. + +User nobody +Group nogroup + +# ServerAdmin: The email address where server problems should be sent. +# Note: this is not currently used, except as an environment variable +# for CGIs. + +#ServerAdmin root@localhost + +# ErrorLog: The location of the error log file. If this does not start +# with /, it is considered relative to the server root. +# Set to /dev/null if you don't want errors logged. +# If unset, defaults to /dev/stderr + +ErrorLog /var/log/boa/error_log +# Please NOTE: Sending the logs to a pipe ('|'), as shown below, +# is somewhat experimental and might fail under heavy load. +# "Usual libc implementations of printf will stall the whole +# process if the receiving end of a pipe stops reading." +#ErrorLog "|/usr/sbin/cronolog --symlink=/var/log/boa/error_log /var/log/boa/error-%Y%m%d.log" + +# AccessLog: The location of the access log file. If this does not +# start with /, it is considered relative to the server root. +# Comment out or set to /dev/null (less effective) to disable +# Access logging. + +AccessLog /var/log/boa/access_log +# Please NOTE: Sending the logs to a pipe ('|'), as shown below, +# is somewhat experimental and might fail under heavy load. +# "Usual libc implementations of printf will stall the whole +# process if the receiving end of a pipe stops reading." +#AccessLog "|/usr/sbin/cronolog --symlink=/var/log/boa/access_log /var/log/boa/access-%Y%m%d.log" + +# UseLocaltime: Logical switch. Uncomment to use localtime +# instead of UTC time +#UseLocaltime + +# VerboseCGILogs: this is just a logical switch. +# It simply notes the start and stop times of cgis in the error log +# Comment out to disable. + +#VerboseCGILogs + +# ServerName: the name of this server that should be sent back to +# clients if different than that returned by gethostname + gethostbyname + +#ServerName www.your.org.here + +# VirtualHost: a logical switch. +# Comment out to disable. +# Given DocumentRoot /var/www, requests on interface 'A' or IP 'IP-A' +# become /var/www/IP-A. +# Example: http://localhost/ becomes /var/www/127.0.0.1 +# +# Not used until version 0.93.17.2. This "feature" also breaks commonlog +# output rules, it prepends the interface number to each access_log line. +# You are expected to fix that problem with a postprocessing script. + +#VirtualHost + +# DocumentRoot: The root directory of the HTML documents. +# Comment out to disable server non user files. + +DocumentRoot /var/www/localhost/htdocs + +# UserDir: The name of the directory which is appended onto a user's home +# directory if a ~user request is recieved. + +UserDir public_html + +# DirectoryIndex: Name of the file to use as a pre-written HTML +# directory index. Please MAKE AND USE THESE FILES. On the +# fly creation of directory indexes can be _slow_. +# Comment out to always use DirectoryMaker + +DirectoryIndex index.html + +# DirectoryMaker: Name of program used to create a directory listing. +# Comment out to disable directory listings. If both this and +# DirectoryIndex are commented out, accessing a directory will give +# an error (though accessing files in the directory are still ok). + +DirectoryMaker /usr/lib/boa/boa_indexer + +# DirectoryCache: If DirectoryIndex doesn't exist, and DirectoryMaker +# has been commented out, the the on-the-fly indexing of Boa can be used +# to generate indexes of directories. Be warned that the output is +# extremely minimal and can cause delays when slow disks are used. +# Note: The DirectoryCache must be writable by the same user/group that +# Boa runs as. + +# DirectoryCache /var/spool/boa/dircache + +# KeepAliveMax: Number of KeepAlive requests to allow per connection +# Comment out, or set to 0 to disable keepalive processing + +KeepAliveMax 1000 + +# KeepAliveTimeout: seconds to wait before keepalive connection times out + +KeepAliveTimeout 10 + +# MimeTypes: This is the file that is used to generate mime type pairs +# and Content-Type fields for boa. +# Comment out to avoid loading mime.types (better use AddType!) + +MimeTypes /etc/boa/mime.types + +# DefaultType: MIME type used if the file extension is unknown, or there +# is no file extension. + +DefaultType text/plain + +# AddType: adds types without editing mime.types +# Example: AddType type extension [extension ...] + +# Uncomment the next line if you want .cgi files to execute from anywhere +#AddType application/x-httpd-cgi cgi + +# Redirect, Alias, and ScriptAlias all have the same semantics -- they +# match the beginning of a request and take appropriate action. Use +# Redirect for other servers, Alias for the same server, and ScriptAlias +# to enable directories for script execution. + +# Redirect allows you to tell clients about documents which used to exist in +# your server's namespace, but do not anymore. This allows you to tell the +# clients where to look for the relocated document. +# Example: Redirect /bar http://elsewhere/feh/bar + +# Aliases: Aliases one path to another. +# Example: Alias /path1/bar /path2/foo + +Alias /doc /usr/share/doc +Alias /icons /var/www/localhost/icons + +# ScriptAlias: Maps a virtual path to a directory for serving scripts +# Example: ScriptAlias /htbin/ /www/htbin/ + +ScriptAlias /cgi-bin/ /var/www/localhost/cgi-bin/ + +# Do not remove this line if you are using sys-apps/OpenRC to manage the +# boa server. +# A PidFile setting is needed in order for OpenRC to stop boa, and it +# must match the setting in the service script. + +PidFile /run/boa.pid |