diff options
Diffstat (limited to 'sys-libs/uclibc-ng/uclibc-ng-1.0.29.ebuild')
-rw-r--r-- | sys-libs/uclibc-ng/uclibc-ng-1.0.29.ebuild | 401 |
1 files changed, 0 insertions, 401 deletions
diff --git a/sys-libs/uclibc-ng/uclibc-ng-1.0.29.ebuild b/sys-libs/uclibc-ng/uclibc-ng-1.0.29.ebuild deleted file mode 100644 index 3b31357d8044..000000000000 --- a/sys-libs/uclibc-ng/uclibc-ng-1.0.29.ebuild +++ /dev/null @@ -1,401 +0,0 @@ -# Copyright 1999-2018 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -EAPI="6" - -inherit flag-o-matic multilib savedconfig toolchain-funcs versionator - -if [[ ${PV} == "9999" ]] ; then - EGIT_REPO_URI="git://uclibc-ng.org/git/uclibc-ng" - inherit git-r3 - MY_P=uclibc-ng-${PV} -else - MY_P=uClibc-ng-${PV} -fi - -DESCRIPTION="C library for developing embedded Linux systems" -HOMEPAGE="https://uclibc-ng.org/" -if [[ ${PV} != "9999" ]] ; then - PATCH_VER="" - SRC_URI="https://downloads.uclibc-ng.org/releases/${PV}/${MY_P}.tar.bz2" - KEYWORDS="-* ~amd64 ~arm ~mips ~ppc ~x86" -fi - -LICENSE="LGPL-2" -SLOT="0" -IUSE="debug hardened iconv ipv6 symlink-compat headers-only" -RESTRICT="strip" - -# 1) We can't upgrade from uclibc to uclibc-ng via a soft blocker since portage -# will delete the ld.so sym link prematurely and break the system. So we -# will hard block and give manual migration instructions. -# 2) Currently uclibc and uclibc-ng's iconv are in bad shape. We've been using -# the breakout library. The disadvantage here is that we have to sprinkle -# LDFAGS=-liconv on build systems that need to link against libiconv. -RDEPEND=" - !!sys-libs/uclibc - iconv? ( dev-libs/libiconv )" - -S=${WORKDIR}/${MY_P} - -export CBUILD=${CBUILD:-${CHOST}} -export CTARGET=${CTARGET:-${CHOST}} -if [[ ${CHOST} == ${CTARGET} ]] ; then - if [[ ${CATEGORY} == cross-* ]] ; then - export CTARGET=${CATEGORY#cross-} - fi -fi - -is_crosscompile() { - [[ ${CHOST} != ${CTARGET} ]] -} - -alt_build_kprefix() { - if [[ ${CBUILD} == ${CHOST} && ${CHOST} == ${CTARGET} ]] ; then - echo /usr/include - else - echo /usr/${CTARGET}/usr/include - fi -} - -just_headers() { - use headers-only && is_crosscompile -} - -uclibc_endian() { - # XXX: this wont work for a toolchain which is bi-endian, but we - # dont have any such thing at the moment, so not a big deal - touch "${T}"/endian.s - $(tc-getAS ${CTARGET}) "${T}"/endian.s -o "${T}"/endian.o - case $(file "${T}"/endian.o) in - *" MSB "*) echo "BIG";; - *" LSB "*) echo "LITTLE";; - *) echo "NFC";; - esac - rm -f "${T}"/endian.{s,o} -} - -kconfig_q_opt() { - local flag=$1; shift - case ${flag} in - y|n) ;; - *) flag=$(usex ${flag} y n) ;; - esac - - local var="defs_${flag}" - eval "${var}+=( $* )" -} - -get_opt() { - ( - unset ${1} - . ${2:-"${S}"/.config} - echo ${!1} - ) -} - -make_oldconfig() { - yes "" 2>/dev/null | emake -s oldconfig >/dev/null -} - -make_config() { - restore_config .config - if [ -f .config ]; then - make_oldconfig - return 0 - else - ewarn "Could not locate user configfile, so we will save a default one" - fi - - emake ARCH=$1 defconfig >/dev/null - - local defs_{y,n} - - # These are forced off - defs_n=( - DOASSERTS - DODEBUG_PT - HAS_NO_THREADS - PROPOLICE_BLOCK_ABRT - SSP_QUICK_CANARY - SUPPORT_LD_DEBUG_EARLY - UCLIBC_HAS_CTYPE_UNSAFE - UCLIBC_HAS_LOCALE - LDSO_SAFE_RUNPATH - ) - - # These are forced on - defs_y=( - DO_C99_MATH - DO_XSI_MATH - FORCE_SHAREABLE_TEXT_SEGMENTS - LDSO_GNU_HASH_SUPPORT - LDSO_PRELOAD_FILE_SUPPORT - LDSO_RUNPATH - LDSO_RUNPATH_OF_EXECUTABLE - LDSO_STANDALONE_SUPPORT - PROPOLICE_BLOCK_SEGV - PTHREADS_DEBUG_SUPPORT - UCLIBC_HAS_ARC4RANDOM - UCLIBC_HAS_BACKTRACE - UCLIBC_HAS_BSD_RES_CLOSE - UCLIBC_HAS_CONTEXT_FUNCS - UCLIBC_HAS_CTYPE_CHECKED - UCLIBC_HAS_EXTRA_COMPAT_RES_STATE - UCLIBC_HAS_FENV - UCLIBC_HAS_FOPEN_CLOSEEXEC_MODE - UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE - UCLIBC_HAS_FOPEN_LARGEFILE_MODE - UCLIBC_HAS_FTS - UCLIBC_HAS_FTW - UCLIBC_HAS_GETPT - UCLIBC_HAS_GLIBC_CUSTOM_PRINTF - UCLIBC_HAS_GLIBC_CUSTOM_STREAMS - UCLIBC_HAS_GNU_GLOB - UCLIBC_HAS_HEXADECIMAL_FLOATS - UCLIBC_HAS_LIBUTIL - UCLIBC_HAS_NFTW - UCLIBC_HAS_OBSOLETE_BSD_SIGNAL - UCLIBC_HAS_PRINTF_M_SPEC - UCLIBC_HAS_PROGRAM_INVOCATION_NAME - UCLIBC_HAS_RESOLVER_SUPPORT - UCLIBC_HAS_SHA256_CRYPT_IMPL - UCLIBC_HAS_SHA512_CRYPT_IMPL - UCLIBC_HAS_SSP - UCLIBC_HAS_STUBS - UCLIBC_HAS_SYS_ERRLIST - UCLIBC_HAS_SYS_SIGLIST - UCLIBC_HAS_THREADS_NATIVE - UCLIBC_HAS_TZ_FILE_READ_MANY - UCLIBC_HAS_UTMP - UCLIBC_HAS_UTMPX - UCLIBC_HAS_WCHAR - UCLIBC_HAS_WORDEXP - UCLIBC_NTP_LEGACY - UCLIBC_SUPPORT_AI_ADDRCONFIG - UCLIBC_SUSV2_LEGACY - UCLIBC_SUSV3_LEGACY - UCLIBC_SUSV3_LEGACY_MACROS - UCLIBC_SUSV4_LEGACY - UCLIBC_USE_NETLINK - ) - - sed -i -e '/ARCH_.*_ENDIAN/d' .config - kconfig_q_opt y "ARCH_WANTS_$(uclibc_endian)_ENDIAN" - - kconfig_q_opt debug DODEBUG - kconfig_q_opt debug SUPPORT_LD_DEBUG - kconfig_q_opt debug UCLIBC_HAS_PROFILING - - kconfig_q_opt ipv6 UCLIBC_HAS_IPV6 - - kconfig_q_opt hardened UCLIBC_BUILD_NOEXECSTACK - kconfig_q_opt hardened UCLIBC_BUILD_NOW - kconfig_q_opt hardened UCLIBC_BUILD_PIE - kconfig_q_opt hardened UCLIBC_BUILD_RELRO - kconfig_q_opt hardened UCLIBC_BUILD_SSP - - local count def - for count in 1 2 ; do - # Run twice as some config opts depend on others being enabled first. - for def in ${defs_y[@]} ; do - sed -i -e "s|.*\<${def}\>.*set|${def}=y|g" .config - done - for def in ${defs_n[@]} ; do - sed -i -e "s|${def}=y|# ${def} is not set|g" .config - done - make_oldconfig - done - - einfo "Enabled options:" - for def in ${defs_y[@]} ; do - einfo " " $(grep "^${def}=y" .config || echo "could not find ${def}") - done - einfo "Disabled options:" - for def in ${defs_n[@]} ; do - einfo " " $(grep "^# ${def} is not set" .config || echo "could not find ${def}") - done - - # setup build and run paths - sed -i \ - -e "/^CROSS_COMPILER_PREFIX/s|=.*|=\"${CTARGET}-\"|" \ - -e "/^KERNEL_HEADERS/s|=.*|=\"$(alt_build_kprefix)\"|" \ - -e "/^SHARED_LIB_LOADER_PREFIX/s|=.*|=\"/$(get_libdir)\"|" \ - -e "/^DEVEL_PREFIX/s|=.*|=\"/usr\"|" \ - -e "/^RUNTIME_PREFIX/s|=.*|=\"/\"|" \ - -e "/^UCLIBC_EXTRA_CFLAGS/s|=.*|=\"${UCLIBC_EXTRA_CFLAGS}\"|" \ - .config || die - - make_oldconfig -} - -pkg_setup() { - # Make sure our CHOST is a uclibc toolchain for native compiling - if [[ ${CHOST} == ${CTARGET} ]]; then - case ${CHOST} in - *-uclinux*|*-uclibc*) ;; - *) die "Use sys-devel/crossdev to build a uclibc toolchain" ;; - esac - fi - - # uClibc-ng doesn't carry old Linux threads, and since we force - # threading our only choice is NPTL which requires i486 and later. - [[ ${CTARGET} == i386* ]] && die "i386 can't support Native Posix Threads (NPTL)." -} - -src_prepare() { - local version subversion extraversion - - # uclibc-ng tries to create a two sym link with ld.so, - # ld-uClibc.so.{0,MAJOR_VERSION} -> ld-uClibc-<version>.so - # where MAJOR_VERSION != 0 indicates the ABI verison. - # We want to get rid of this and just have ABI = 0. - eapply "${FILESDIR}"/uclibc-compat-r1.patch - - # We need to change the major.minor.sublevel of uclibc-ng. - # Upstream sets MAJOR_VERSION = 1 which breaks runtime linking. - # If we really want the ABI bump, we'll have to hack the gcc - # spec file and change the '*link:' rule. - version=( $(get_version_components) ) - if [[ -z ${version[1]} ]]; then - subversion=0 - extraversion=0 - else - subversion=${version[1]} - if [[ -z ${version[2]} ]]; then - extraversion=0 - else - extraversion=.${version[2]} - fi - fi - - sed -i \ - -e "/^MAJOR_VERSION/s|:=.*|:= 0|" \ - -e "/^MINOR_VERSION/s|:=.*|:= ${version[0]}|" \ - -e "/^SUBLEVEL/s|:=.*|:= ${subversion}|" \ - -e "/^EXTRAVERSION/s|:=.*|:= ${extraversion}|" \ - Rules.mak || die - - eapply_user -} - -src_configure() { - # Map our toolchain arch name to the name expected by uClibc-ng. - local target=$(tc-arch) - case ${target} in - amd64) target="x86_64";; - arm) target="arm";; - mips) target="mips";; - ppc) target="powerpc";; - x86) target="i386";; - esac - - # Do arch specific configuration by changing the defaults in - # extra/Configs/Config.<arch>. If these are not overridden - # by an save .config, they will be selected by default. - - # For i386, i486, i586 and i686 - local cpu - if [[ ${target} == "i386" ]]; then - [[ ${CTARGET} == i[456]86* ]] && cpu="${CTARGET:1:1}86" - sed -i -e "s|default CONFIG_686|default CONFIG_${cpu:-486}|" \ - extra/Configs/Config.i386 || die - fi - - # For arm - if [[ ${target} == "arm" ]]; then - sed -i -e '/Build for EABI/a \\tdefault y' extra/Configs/Config.arm - fi - - # We set HOSTCC to the proper tuple rather than just 'gcc' - sed -i -e "s|^HOSTCC.*=.*|HOSTCC=$(tc-getBUILD_CC)|" Rules.mak - - make_config ${target} - - einfo - einfo "Runtime Prefix: /" - einfo "Devel Prefix: /usr" - einfo "Kernel Prefix: $(alt_build_kprefix)" - einfo "CBUILD: ${CBUILD}" - einfo "CHOST: ${CHOST}" - einfo "CTARGET: ${CTARGET}" - einfo "ABI: ${ABI}" - einfo "ENDIAN: $(uclibc_endian)" - einfo -} - -src_compile() { - emake headers - just_headers && return 0 - - emake - if is_crosscompile ; then - emake -C utils hostutils - else - emake utils - fi -} - -src_test() { - is_crosscompile && return 0 - - # assert test fails on pax/grsec enabled kernels - # normal vfork test fails in sandbox (both glibc/uclibc) - emake UCLIBC_ONLY=1 check -} - -src_install() { - local sysroot=${D} - is_crosscompile && sysroot+="/usr/${CTARGET}" - - local target="install" - just_headers && target="install_headers" - emake DESTDIR="${sysroot}" ${target} - - save_config .config - - # remove files coming from kernel-headers - rm -rf "${sysroot}"/usr/include/{linux,asm*} - - # Make sure we install the sys-include symlink so that when - # we build a 2nd stage cross-compiler, gcc finds the target - # system headers correctly. See gcc/doc/gccinstall.info - if is_crosscompile ; then - dosym usr/include /usr/${CTARGET}/sys-include - if ! just_headers && [[ -n $(get_opt HAVE_SHARED) ]] ; then - newbin utils/ldconfig.host ${CTARGET}-ldconfig - newbin utils/ldd.host ${CTARGET}-ldd - fi - return 0 - fi - - if use symlink-compat; then - dosym libc.so.0 "${DESTDIR}"/lib/libcrypt.so.0 - dosym libc.so.0 "${DESTDIR}"/lib/libdl.so.0 - dosym libc.so.0 "${DESTDIR}"/lib/libm.so.0 - dosym libc.so.0 "${DESTDIR}"/lib/libpthread.so.0 - dosym libc.so.0 "${DESTDIR}"/lib/librt.so.0 - dosym libc.so.0 "${DESTDIR}"/lib/libresolv.so.0 - dosym libc.so.0 "${DESTDIR}"/lib/libubacktrace.so.0 - dosym libc.so.0 "${DESTDIR}"/lib/libutil.so.0 - fi - - emake DESTDIR="${D}" install_utils - dobin extra/scripts/getent - dodoc README docs/*.txt -} - -pkg_postinst() { - is_crosscompile && return 0 - - if [ ! -e "${ROOT}"/etc/TZ ] ; then - ewarn "Please remember to set your timezone in /etc/TZ" - mkdir -p "${ROOT}"/etc - echo "UTC" > "${ROOT}"/etc/TZ - fi - [ "${ROOT}" != "/" ] && return 0 - # update cache before reloading init - ldconfig - # reload init ... - /sbin/telinit U 2>/dev/null -} |