diff options
Diffstat (limited to 'sys-fs/lvm2/lvm2-2.02.184-r3.ebuild')
-rw-r--r-- | sys-fs/lvm2/lvm2-2.02.184-r3.ebuild | 269 |
1 files changed, 269 insertions, 0 deletions
diff --git a/sys-fs/lvm2/lvm2-2.02.184-r3.ebuild b/sys-fs/lvm2/lvm2-2.02.184-r3.ebuild new file mode 100644 index 000000000000..7c49fed05952 --- /dev/null +++ b/sys-fs/lvm2/lvm2-2.02.184-r3.ebuild @@ -0,0 +1,269 @@ +# Copyright 1999-2019 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=6 +inherit autotools linux-info multilib systemd toolchain-funcs udev flag-o-matic + +DESCRIPTION="User-land utilities for LVM2 (device-mapper) software" +HOMEPAGE="https://sourceware.org/lvm2/" +SRC_URI="ftp://sourceware.org/pub/lvm2/${PN/lvm/LVM}.${PV}.tgz + ftp://sourceware.org/pub/lvm2/old/${PN/lvm/LVM}.${PV}.tgz" + +LICENSE="GPL-2" +SLOT="0" +KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-linux ~x86-linux" +IUSE="readline static static-libs systemd lvm2create_initrd sanlock selinux +udev +thin device-mapper-only" +REQUIRED_USE="device-mapper-only? ( !lvm2create_initrd !sanlock !thin ) + systemd? ( udev )" + +DEPEND_COMMON=" + dev-libs/libaio[static-libs?] + static? ( dev-libs/libaio[static-libs] ) + !static? ( dev-libs/libaio[static-libs?] ) + readline? ( sys-libs/readline:0= ) + sanlock? ( sys-cluster/sanlock ) + systemd? ( >=sys-apps/systemd-205:0= ) + udev? ( >=virtual/libudev-208:=[static-libs?] )" +# /run is now required for locking during early boot. /var cannot be assumed to +# be available -- thus, pull in recent enough baselayout for /run. +# This version of LVM is incompatible with cryptsetup <1.1.2. +RDEPEND="${DEPEND_COMMON} + >=sys-apps/baselayout-2.2 + !<sys-apps/openrc-0.11 + !<sys-fs/cryptsetup-1.1.2 + !!sys-fs/lvm-user + >=sys-apps/util-linux-2.16 + lvm2create_initrd? ( sys-apps/makedev ) + thin? ( >=sys-block/thin-provisioning-tools-0.3.0 )" +# note: thin- 0.3.0 is required to avoid --disable-thin_check_needs_check +# USE 'static' currently only works with eudev, bug 520450 +DEPEND="${DEPEND_COMMON} + virtual/pkgconfig + >=sys-devel/binutils-2.20.1-r1 + sys-devel/autoconf-archive + static? ( + selinux? ( sys-libs/libselinux[static-libs] ) + udev? ( >=sys-fs/eudev-3.1.2[static-libs] ) + >=sys-apps/util-linux-2.16[static-libs] + )" + +S=${WORKDIR}/${PN/lvm/LVM}.${PV} + +PATCHES=( + # Gentoo specific modification(s): + "${FILESDIR}"/${PN}-2.02.178-example.conf.in.patch + + # For upstream -- review and forward: + "${FILESDIR}"/${PN}-2.02.63-always-make-static-libdm.patch + "${FILESDIR}"/${PN}-2.02.56-lvm2create_initrd.patch + "${FILESDIR}"/${PN}-2.02.67-createinitrd.patch #301331 + "${FILESDIR}"/${PN}-2.02.99-locale-muck.patch #330373 + "${FILESDIR}"/${PN}-2.02.178-asneeded.patch # -Wl,--as-needed + "${FILESDIR}"/${PN}-2.02.178-dynamic-static-ldflags.patch #332905 + "${FILESDIR}"/${PN}-2.02.178-static-pkgconfig-libs.patch #370217, #439414 + blkid + "${FILESDIR}"/${PN}-2.02.176-pthread-pkgconfig.patch #492450 + "${FILESDIR}"/${PN}-2.02.171-static-libm.patch #617756 + "${FILESDIR}"/${PN}-2.02.166-HPPA-no-O_DIRECT.patch #657446 + #"${FILESDIR}"/${PN}-2.02.145-mkdev.patch #580062 # Merged upstream + "${FILESDIR}"/${PN}-2.02.184-dmeventd-no-idle-exit.patch +) + +pkg_setup() { + local CONFIG_CHECK="~SYSVIPC" + + if use udev; then + local WARNING_SYSVIPC="CONFIG_SYSVIPC:\tis not set (required for udev sync)\n" + if linux_config_exists; then + local uevent_helper_path=$(linux_chkconfig_string UEVENT_HELPER_PATH) + if [ -n "${uevent_helper_path}" ] && [ "${uevent_helper_path}" != '""' ]; then + ewarn "It's recommended to set an empty value to the following kernel config option:" + ewarn "CONFIG_UEVENT_HELPER_PATH=${uevent_helper_path}" + fi + fi + fi + + check_extra_config + + # 1. Genkernel no longer copies /sbin/lvm blindly. + if use static; then + elog "Warning, we no longer overwrite /sbin/lvm and /sbin/dmsetup with" + elog "their static versions. If you need the static binaries," + elog "you must append .static to the filename!" + fi +} + +src_prepare() { + default + + sed -i \ + -e "1iAR = $(tc-getAR)" \ + -e "s:CC ?= @CC@:CC = $(tc-getCC):" \ + make.tmpl.in || die #444082 + + sed -i -e '/FLAG/s:-O2::' configure{.ac,} || die #480212 + + if use udev && ! use device-mapper-only; then + sed -i -e '/use_lvmetad =/s:0:1:' conf/example.conf.in || die #514196 + elog "Notice that \"use_lvmetad\" setting is enabled with USE=\"udev\" in" + elog "/etc/lvm/lvm.conf, which will require restart of udev, lvm, and lvmetad" + elog "if it was previously disabled." + fi + + sed -i -e "s:/usr/bin/true:$(type -P true):" scripts/blk_availability_systemd_red_hat.service.in || die #517514 + + # Without thin-privision-tools, there is nothing to install for target install_man7: + if ! use thin ; then + sed -i -e '/^install_lvm2/s:install_man7::' man/Makefile.in || die + fi + + eautoreconf +} + +src_configure() { + filter-flags -flto + local myeconfargs=() + + # Most of this package does weird stuff. + # The build options are tristate, and --without is NOT supported + # options: 'none', 'internal', 'shared' + myeconfargs+=( + $(use_enable !device-mapper-only dmfilemapd) + $(use_enable !device-mapper-only dmeventd) + $(use_enable !device-mapper-only cmdlib) + $(use_enable !device-mapper-only applib) + $(use_enable !device-mapper-only fsadm) + $(use_enable !device-mapper-only lvmetad) + $(use_enable !device-mapper-only lvmpolld) + $(usex device-mapper-only --disable-udev-systemd-background-jobs '') + + # This only causes the .static versions to become available + $(usex static --enable-static_link '') + + # dmeventd requires mirrors to be internal, and snapshot available + # so we cannot disable them + --with-mirrors="$(usex device-mapper-only none internal)" + --with-snapshots="$(usex device-mapper-only none internal)" + + # disable O_DIRECT support on hppa, breaks pv detection (#99532) + $(usex hppa --disable-o_direct '') + ) + + if use thin; then + myeconfargs+=( --with-thin=internal --with-cache=internal ) + local texec + for texec in check dump repair restore; do + myeconfargs+=( --with-thin-${texec}="${EPREFIX}"/sbin/thin_${texec} ) + myeconfargs+=( --with-cache-${texec}="${EPREFIX}"/sbin/cache_${texec} ) + done + else + myeconfargs+=( --with-thin=none --with-cache=none ) + fi + + myeconfargs+=( --with-clvmd=none --with-cluster=none ) + + myeconfargs+=( + $(use_enable readline) + $(use_enable selinux) + --enable-pkgconfig + --with-confdir="${EPREFIX}"/etc + --exec-prefix="${EPREFIX}" + --sbindir="${EPREFIX}/sbin" + --with-staticdir="${EPREFIX}"/sbin + --libdir="${EPREFIX}/$(get_libdir)" + --with-usrlibdir="${EPREFIX}/usr/$(get_libdir)" + --with-default-dm-run-dir=/run + --with-default-run-dir=/run/lvm + --with-default-locking-dir=/run/lock/lvm + --with-default-pid-dir=/run + $(use_enable udev udev_rules) + $(use_enable udev udev_sync) + $(use_with udev udevdir "$(get_udevdir)"/rules.d) + $(use_enable sanlock lvmlockd-sanlock) + $(use_enable systemd udev-systemd-background-jobs) + $(use_enable systemd notify-dbus) + --with-systemdsystemunitdir="$(systemd_get_systemunitdir)" + CLDFLAGS="${LDFLAGS}" + ) + econf "${myeconfargs[@]}" +} + +src_compile() { + pushd include >/dev/null + emake + popd >/dev/null + + if use device-mapper-only ; then + emake device-mapper + else + emake + emake CC="$(tc-getCC)" -C scripts lvm2_activation_generator_systemd_red_hat + fi +} + +src_install() { + local inst INSTALL_TARGETS + INSTALL_TARGETS=( install install_tmpfiles_configuration ) + # install systemd related files only when requested, bug #522430 + use systemd && INSTALL_TARGETS+=( install_systemd_units install_systemd_generators ) + use device-mapper-only && INSTALL_TARGETS=( install_device-mapper ) + for inst in ${INSTALL_TARGETS[@]}; do + emake DESTDIR="${D}" ${inst} + done + + newinitd "${FILESDIR}"/device-mapper.rc-2.02.105-r2 device-mapper + newconfd "${FILESDIR}"/device-mapper.conf-1.02.22-r3 device-mapper + + if use !device-mapper-only ; then + newinitd "${FILESDIR}"/dmeventd.initd-2.02.184-r2 dmeventd + newinitd "${FILESDIR}"/lvm.rc-2.02.184-r3 lvm + newconfd "${FILESDIR}"/lvm.confd-2.02.184-r3 lvm + if ! use udev ; then + # We keep the variable but remove udev from it. + sed -r -i \ + -e '/^rc_need=/s/\<udev\>//g' \ + "${ED}/etc/conf.d/lvm" || die "Could not drop udev from rc_need" + fi + + newinitd "${FILESDIR}"/lvm-monitoring.initd-2.02.105-r2 lvm-monitoring + newinitd "${FILESDIR}"/lvmetad.initd-2.02.116-r3 lvmetad + newinitd "${FILESDIR}"/lvmpolld.initd-2.02.183 lvmpolld + fi + + if use sanlock; then + newinitd "${FILESDIR}"/lvmlockd.initd-2.02.166-r1 lvmlockd + fi + + if use static-libs; then + dolib.a libdm/ioctl/libdevmapper.a + dolib.a libdaemon/client/libdaemonclient.a #462908 + #gen_usr_ldscript libdevmapper.so + dolib.a daemons/dmeventd/libdevmapper-event.a + #gen_usr_ldscript libdevmapper-event.so + else + rm -f "${ED%/}"/usr/$(get_libdir)/{libdevmapper-event,liblvm2cmd,liblvm2app,libdevmapper}.a + fi + + if use lvm2create_initrd; then + dosbin scripts/lvm2create_initrd/lvm2create_initrd + doman scripts/lvm2create_initrd/lvm2create_initrd.8 + newdoc scripts/lvm2create_initrd/README README.lvm2create_initrd + fi + + insinto /etc + doins "${FILESDIR}"/dmtab + + dodoc README VERSION* WHATS_NEW WHATS_NEW_DM doc/*.{c,txt} conf/*.conf +} + +pkg_postinst() { + ewarn "Make sure the \"lvm\" init script is in the runlevels:" + ewarn "# rc-update add lvm boot" + ewarn + ewarn "Make sure to enable lvmetad in /etc/lvm/lvm.conf if you want" + ewarn "to enable lvm autoactivation and metadata caching." +} + +src_test() { + einfo "Tests are disabled because of device-node mucking, if you want to" + einfo "run tests, compile the package and see ${S}/tests" +} |