diff options
Diffstat (limited to 'profiles/default/linux')
118 files changed, 12066 insertions, 0 deletions
diff --git a/profiles/default/linux/amd64/17.0/musl/clang/deprecated b/profiles/default/linux/amd64/17.0/musl/clang/deprecated new file mode 100644 index 000000000000..f4c5ed652f3e --- /dev/null +++ b/profiles/default/linux/amd64/17.0/musl/clang/deprecated @@ -0,0 +1,104 @@ +default/linux/amd64/23.0/split-usr/musl/llvm + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/amd64/17.0/musl/deprecated b/profiles/default/linux/amd64/17.0/musl/deprecated new file mode 100644 index 000000000000..fb300c26f9ab --- /dev/null +++ b/profiles/default/linux/amd64/17.0/musl/deprecated @@ -0,0 +1,104 @@ +default/linux/amd64/23.0/split-usr/musl + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/amd64/17.0/musl/hardened/deprecated b/profiles/default/linux/amd64/17.0/musl/hardened/deprecated new file mode 100644 index 000000000000..20c9fedaf0a9 --- /dev/null +++ b/profiles/default/linux/amd64/17.0/musl/hardened/deprecated @@ -0,0 +1,104 @@ +default/linux/amd64/23.0/split-usr/musl/hardened + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/amd64/17.0/musl/hardened/selinux/deprecated b/profiles/default/linux/amd64/17.0/musl/hardened/selinux/deprecated new file mode 100644 index 000000000000..d11cd2c3257f --- /dev/null +++ b/profiles/default/linux/amd64/17.0/musl/hardened/selinux/deprecated @@ -0,0 +1,104 @@ +default/linux/amd64/23.0/split-usr/musl/hardened/selinux + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/arm/17.0/musl/armv6j/deprecated b/profiles/default/linux/arm/17.0/musl/armv6j/deprecated new file mode 100644 index 000000000000..5d36c73cd850 --- /dev/null +++ b/profiles/default/linux/arm/17.0/musl/armv6j/deprecated @@ -0,0 +1,104 @@ +default/linux/arm/23.0/split-usr/armv6j_hf/musl + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/arm/17.0/musl/armv6j/hardened/deprecated b/profiles/default/linux/arm/17.0/musl/armv6j/hardened/deprecated new file mode 100644 index 000000000000..de12cbfb2272 --- /dev/null +++ b/profiles/default/linux/arm/17.0/musl/armv6j/hardened/deprecated @@ -0,0 +1,104 @@ +default/linux/arm/23.0/split-usr/armv6j_hf/musl/hardened + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/arm/17.0/musl/armv6j/hardened/selinux/deprecated b/profiles/default/linux/arm/17.0/musl/armv6j/hardened/selinux/deprecated new file mode 100644 index 000000000000..32c22267e806 --- /dev/null +++ b/profiles/default/linux/arm/17.0/musl/armv6j/hardened/selinux/deprecated @@ -0,0 +1,104 @@ +default/linux/arm/23.0/split-usr/armv6j_hf/musl/hardened/selinux + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/arm/17.0/musl/armv7a/deprecated b/profiles/default/linux/arm/17.0/musl/armv7a/deprecated new file mode 100644 index 000000000000..6fc6daceb3ca --- /dev/null +++ b/profiles/default/linux/arm/17.0/musl/armv7a/deprecated @@ -0,0 +1,104 @@ +default/linux/arm/23.0/split-usr/armv7a_hf/musl + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/arm/17.0/musl/armv7a/hardened/deprecated b/profiles/default/linux/arm/17.0/musl/armv7a/hardened/deprecated new file mode 100644 index 000000000000..b06f94740d02 --- /dev/null +++ b/profiles/default/linux/arm/17.0/musl/armv7a/hardened/deprecated @@ -0,0 +1,104 @@ +default/linux/arm/23.0/split-usr/armv7a_hf/musl/hardened + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/arm/17.0/musl/armv7a/hardened/selinux/deprecated b/profiles/default/linux/arm/17.0/musl/armv7a/hardened/selinux/deprecated new file mode 100644 index 000000000000..05defdaa7231 --- /dev/null +++ b/profiles/default/linux/arm/17.0/musl/armv7a/hardened/selinux/deprecated @@ -0,0 +1,104 @@ +default/linux/arm/23.0/split-usr/armv7a_hf/musl/hardened/selinux + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/arm64/17.0/musl/deprecated b/profiles/default/linux/arm64/17.0/musl/deprecated new file mode 100644 index 000000000000..96ea042000bf --- /dev/null +++ b/profiles/default/linux/arm64/17.0/musl/deprecated @@ -0,0 +1,104 @@ +default/linux/arm64/23.0/split-usr/musl + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/arm64/17.0/musl/hardened/deprecated b/profiles/default/linux/arm64/17.0/musl/hardened/deprecated new file mode 100644 index 000000000000..7a1a18659361 --- /dev/null +++ b/profiles/default/linux/arm64/17.0/musl/hardened/deprecated @@ -0,0 +1,104 @@ +default/linux/arm64/23.0/split-usr/musl/hardened + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/arm64/17.0/musl/hardened/selinux/deprecated b/profiles/default/linux/arm64/17.0/musl/hardened/selinux/deprecated new file mode 100644 index 000000000000..da1bf7ef3770 --- /dev/null +++ b/profiles/default/linux/arm64/17.0/musl/hardened/selinux/deprecated @@ -0,0 +1,104 @@ +default/linux/arm64/23.0/split-usr/musl/hardened/selinux + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/arm64/17.0/musl/llvm/deprecated b/profiles/default/linux/arm64/17.0/musl/llvm/deprecated new file mode 100644 index 000000000000..8e6ae643caf1 --- /dev/null +++ b/profiles/default/linux/arm64/17.0/musl/llvm/deprecated @@ -0,0 +1,104 @@ +default/linux/arm64/23.0/split-usr/musl/llvm + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/m68k/17.0/musl/deprecated b/profiles/default/linux/m68k/17.0/musl/deprecated new file mode 100644 index 000000000000..d9c8615f02bd --- /dev/null +++ b/profiles/default/linux/m68k/17.0/musl/deprecated @@ -0,0 +1,104 @@ +default/linux/m68k/23.0/split-usr/musl + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/mipsel/multilib/n32/deprecated b/profiles/default/linux/mips/17.0/mipsel/multilib/n32/deprecated new file mode 100644 index 000000000000..a88072d79600 --- /dev/null +++ b/profiles/default/linux/mips/17.0/mipsel/multilib/n32/deprecated @@ -0,0 +1,104 @@ +default/linux/mips/23.0/split-usr/mipsel/multilib/n32 + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/mipsel/multilib/n32/systemd/merged-usr/deprecated b/profiles/default/linux/mips/17.0/mipsel/multilib/n32/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..91dd79c36c49 --- /dev/null +++ b/profiles/default/linux/mips/17.0/mipsel/multilib/n32/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/mips/23.0/mipsel/multilib/n32/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/mipsel/multilib/n64/deprecated b/profiles/default/linux/mips/17.0/mipsel/multilib/n64/deprecated new file mode 100644 index 000000000000..d30a7d94ed9e --- /dev/null +++ b/profiles/default/linux/mips/17.0/mipsel/multilib/n64/deprecated @@ -0,0 +1,104 @@ +default/linux/mips/23.0/split-usr/mipsel/multilib/n64 + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/mipsel/multilib/n64/systemd/merged-usr/deprecated b/profiles/default/linux/mips/17.0/mipsel/multilib/n64/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..546f2481518e --- /dev/null +++ b/profiles/default/linux/mips/17.0/mipsel/multilib/n64/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/mips/23.0/mipsel/multilib/n64/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/mipsel/multilib/o32/deprecated b/profiles/default/linux/mips/17.0/mipsel/multilib/o32/deprecated new file mode 100644 index 000000000000..0b4da443b64e --- /dev/null +++ b/profiles/default/linux/mips/17.0/mipsel/multilib/o32/deprecated @@ -0,0 +1 @@ +default/linux/mips/17.0/mipsel/o32 diff --git a/profiles/default/linux/mips/17.0/mipsel/n32/deprecated b/profiles/default/linux/mips/17.0/mipsel/n32/deprecated new file mode 100644 index 000000000000..e8ef1fd920dd --- /dev/null +++ b/profiles/default/linux/mips/17.0/mipsel/n32/deprecated @@ -0,0 +1,104 @@ +default/linux/mips/23.0/split-usr/mipsel/n32 + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/mipsel/n32/systemd/merged-usr/deprecated b/profiles/default/linux/mips/17.0/mipsel/n32/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..d98cd50d4944 --- /dev/null +++ b/profiles/default/linux/mips/17.0/mipsel/n32/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/mips/23.0/mipsel/n32/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/mipsel/n64/deprecated b/profiles/default/linux/mips/17.0/mipsel/n64/deprecated new file mode 100644 index 000000000000..d27ee875a2ba --- /dev/null +++ b/profiles/default/linux/mips/17.0/mipsel/n64/deprecated @@ -0,0 +1,104 @@ +default/linux/mips/23.0/split-usr/mipsel/n64 + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/mipsel/n64/musl/deprecated b/profiles/default/linux/mips/17.0/mipsel/n64/musl/deprecated new file mode 100644 index 000000000000..085b11b8d942 --- /dev/null +++ b/profiles/default/linux/mips/17.0/mipsel/n64/musl/deprecated @@ -0,0 +1,104 @@ +default/linux/mips/23.0/split-usr/mipsel/n64/musl + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/mipsel/n64/systemd/merged-usr/deprecated b/profiles/default/linux/mips/17.0/mipsel/n64/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..0f1d3637239e --- /dev/null +++ b/profiles/default/linux/mips/17.0/mipsel/n64/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/mips/23.0/mipsel/n64/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/mipsel/o32/deprecated b/profiles/default/linux/mips/17.0/mipsel/o32/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/mips/17.0/mipsel/o32/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/mipsel/o32/musl/deprecated b/profiles/default/linux/mips/17.0/mipsel/o32/musl/deprecated new file mode 100644 index 000000000000..970442e531a0 --- /dev/null +++ b/profiles/default/linux/mips/17.0/mipsel/o32/musl/deprecated @@ -0,0 +1,104 @@ +default/linux/mips/23.0/split-usr/mipsel/o32/musl + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/mipsel/o32/systemd/merged-usr/deprecated b/profiles/default/linux/mips/17.0/mipsel/o32/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/mips/17.0/mipsel/o32/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/multilib/n32/deprecated b/profiles/default/linux/mips/17.0/multilib/n32/deprecated new file mode 100644 index 000000000000..a4a9ed800704 --- /dev/null +++ b/profiles/default/linux/mips/17.0/multilib/n32/deprecated @@ -0,0 +1,104 @@ +default/linux/mips/23.0/split-usr/multilib/n32 + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/multilib/n32/systemd/merged-usr/deprecated b/profiles/default/linux/mips/17.0/multilib/n32/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..372276d3f1aa --- /dev/null +++ b/profiles/default/linux/mips/17.0/multilib/n32/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/mips/23.0/multilib/n32/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/multilib/n64/deprecated b/profiles/default/linux/mips/17.0/multilib/n64/deprecated new file mode 100644 index 000000000000..a086d5b8f3f3 --- /dev/null +++ b/profiles/default/linux/mips/17.0/multilib/n64/deprecated @@ -0,0 +1,104 @@ +default/linux/mips/23.0/split-usr/multilib/n64 + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/multilib/o32/deprecated b/profiles/default/linux/mips/17.0/multilib/o32/deprecated new file mode 100644 index 000000000000..98ce3606a057 --- /dev/null +++ b/profiles/default/linux/mips/17.0/multilib/o32/deprecated @@ -0,0 +1 @@ +default/linux/mips/17.0/o32 diff --git a/profiles/default/linux/mips/17.0/n32/deprecated b/profiles/default/linux/mips/17.0/n32/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/mips/17.0/n32/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/n32/systemd/merged-usr/deprecated b/profiles/default/linux/mips/17.0/n32/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/mips/17.0/n32/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/n64/deprecated b/profiles/default/linux/mips/17.0/n64/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/mips/17.0/n64/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/n64/musl/deprecated b/profiles/default/linux/mips/17.0/n64/musl/deprecated new file mode 100644 index 000000000000..4f0f9630cede --- /dev/null +++ b/profiles/default/linux/mips/17.0/n64/musl/deprecated @@ -0,0 +1,104 @@ +default/linux/mips/23.0/split-usr/n64/musl + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/n64/systemd/merged-usr/deprecated b/profiles/default/linux/mips/17.0/n64/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/mips/17.0/n64/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/o32/deprecated b/profiles/default/linux/mips/17.0/o32/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/mips/17.0/o32/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/o32/musl/deprecated b/profiles/default/linux/mips/17.0/o32/musl/deprecated new file mode 100644 index 000000000000..0eadddb9a36b --- /dev/null +++ b/profiles/default/linux/mips/17.0/o32/musl/deprecated @@ -0,0 +1,104 @@ +default/linux/mips/23.0/split-usr/o32/musl + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/mips/17.0/o32/systemd/merged-usr/deprecated b/profiles/default/linux/mips/17.0/o32/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/mips/17.0/o32/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/powerpc/ppc64/17.0/32bit-userland/deprecated b/profiles/default/linux/powerpc/ppc64/17.0/32bit-userland/deprecated new file mode 100644 index 000000000000..4b91a95b3766 --- /dev/null +++ b/profiles/default/linux/powerpc/ppc64/17.0/32bit-userland/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc/23.0/split-usr + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/powerpc/ppc64/17.0/32bit-userland/desktop/deprecated b/profiles/default/linux/powerpc/ppc64/17.0/32bit-userland/desktop/deprecated new file mode 100644 index 000000000000..0159d2926b31 --- /dev/null +++ b/profiles/default/linux/powerpc/ppc64/17.0/32bit-userland/desktop/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc/23.0/split-usr/desktop + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/powerpc/ppc64/17.0/32bit-userland/desktop/gnome/deprecated b/profiles/default/linux/powerpc/ppc64/17.0/32bit-userland/desktop/gnome/deprecated new file mode 100644 index 000000000000..0c3059bbec6b --- /dev/null +++ b/profiles/default/linux/powerpc/ppc64/17.0/32bit-userland/desktop/gnome/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc/23.0/split-usr/desktop/gnome + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/powerpc/ppc64/17.0/32bit-userland/desktop/gnome/systemd/merged-usr/deprecated b/profiles/default/linux/powerpc/ppc64/17.0/32bit-userland/desktop/gnome/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..78c077397232 --- /dev/null +++ b/profiles/default/linux/powerpc/ppc64/17.0/32bit-userland/desktop/gnome/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc/23.0/desktop/gnome + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/powerpc/ppc64/17.0/32bit-userland/developer/deprecated b/profiles/default/linux/powerpc/ppc64/17.0/32bit-userland/developer/deprecated new file mode 100644 index 000000000000..4b91a95b3766 --- /dev/null +++ b/profiles/default/linux/powerpc/ppc64/17.0/32bit-userland/developer/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc/23.0/split-usr + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc/17.0/deprecated b/profiles/default/linux/ppc/17.0/deprecated new file mode 100644 index 000000000000..4b91a95b3766 --- /dev/null +++ b/profiles/default/linux/ppc/17.0/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc/23.0/split-usr + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc/17.0/desktop/deprecated b/profiles/default/linux/ppc/17.0/desktop/deprecated new file mode 100644 index 000000000000..0159d2926b31 --- /dev/null +++ b/profiles/default/linux/ppc/17.0/desktop/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc/23.0/split-usr/desktop + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc/17.0/desktop/gnome/deprecated b/profiles/default/linux/ppc/17.0/desktop/gnome/deprecated new file mode 100644 index 000000000000..0c3059bbec6b --- /dev/null +++ b/profiles/default/linux/ppc/17.0/desktop/gnome/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc/23.0/split-usr/desktop/gnome + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc/17.0/desktop/gnome/systemd/merged-usr/deprecated b/profiles/default/linux/ppc/17.0/desktop/gnome/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..4c39f7d0e8e4 --- /dev/null +++ b/profiles/default/linux/ppc/17.0/desktop/gnome/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc/23.0/desktop/gnome/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc/17.0/developer/deprecated b/profiles/default/linux/ppc/17.0/developer/deprecated new file mode 100644 index 000000000000..4b91a95b3766 --- /dev/null +++ b/profiles/default/linux/ppc/17.0/developer/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc/23.0/split-usr + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc/17.0/musl/deprecated b/profiles/default/linux/ppc/17.0/musl/deprecated new file mode 100644 index 000000000000..e719c6300283 --- /dev/null +++ b/profiles/default/linux/ppc/17.0/musl/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc/23.0/split-usr/musl + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc/17.0/musl/hardened/deprecated b/profiles/default/linux/ppc/17.0/musl/hardened/deprecated new file mode 100644 index 000000000000..4f477a5098aa --- /dev/null +++ b/profiles/default/linux/ppc/17.0/musl/hardened/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc/23.0/split-usr/musl/hardened + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc/17.0/systemd/merged-usr/deprecated b/profiles/default/linux/ppc/17.0/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..030e189b867f --- /dev/null +++ b/profiles/default/linux/ppc/17.0/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc/23.0/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64/17.0/deprecated b/profiles/default/linux/ppc64/17.0/deprecated new file mode 100644 index 000000000000..d41b17886ec4 --- /dev/null +++ b/profiles/default/linux/ppc64/17.0/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64/23.0/split-usr + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64/17.0/desktop/deprecated b/profiles/default/linux/ppc64/17.0/desktop/deprecated new file mode 100644 index 000000000000..d76d864e182e --- /dev/null +++ b/profiles/default/linux/ppc64/17.0/desktop/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64/23.0/split-usr/desktop + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64/17.0/desktop/gnome/deprecated b/profiles/default/linux/ppc64/17.0/desktop/gnome/deprecated new file mode 100644 index 000000000000..5140905bc84b --- /dev/null +++ b/profiles/default/linux/ppc64/17.0/desktop/gnome/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64/23.0/split-usr/desktop/gnome + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64/17.0/desktop/gnome/systemd/merged-usr/deprecated b/profiles/default/linux/ppc64/17.0/desktop/gnome/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..8dd6e72c370d --- /dev/null +++ b/profiles/default/linux/ppc64/17.0/desktop/gnome/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64/23.0/desktop/gnome/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64/17.0/developer/deprecated b/profiles/default/linux/ppc64/17.0/developer/deprecated new file mode 100644 index 000000000000..d41b17886ec4 --- /dev/null +++ b/profiles/default/linux/ppc64/17.0/developer/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64/23.0/split-usr + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64/17.0/musl/deprecated b/profiles/default/linux/ppc64/17.0/musl/deprecated new file mode 100644 index 000000000000..7b217795bc28 --- /dev/null +++ b/profiles/default/linux/ppc64/17.0/musl/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64/23.0/split-usr/musl + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64/17.0/musl/hardened/deprecated b/profiles/default/linux/ppc64/17.0/musl/hardened/deprecated new file mode 100644 index 000000000000..254125d4eb92 --- /dev/null +++ b/profiles/default/linux/ppc64/17.0/musl/hardened/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64/23.0/split-usr/musl/hardened + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64/17.0/systemd/merged-usr/deprecated b/profiles/default/linux/ppc64/17.0/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..dfa8e211fd84 --- /dev/null +++ b/profiles/default/linux/ppc64/17.0/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64/23.0/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64le/17.0/deprecated b/profiles/default/linux/ppc64le/17.0/deprecated new file mode 100644 index 000000000000..ee7320f6f7c6 --- /dev/null +++ b/profiles/default/linux/ppc64le/17.0/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64le/23.0/split-usr + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64le/17.0/desktop/deprecated b/profiles/default/linux/ppc64le/17.0/desktop/deprecated new file mode 100644 index 000000000000..a4ec403f1ad0 --- /dev/null +++ b/profiles/default/linux/ppc64le/17.0/desktop/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64le/23.0/split-usr/desktop + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64le/17.0/desktop/gnome/deprecated b/profiles/default/linux/ppc64le/17.0/desktop/gnome/deprecated new file mode 100644 index 000000000000..32232b7ffd72 --- /dev/null +++ b/profiles/default/linux/ppc64le/17.0/desktop/gnome/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64le/23.0/split-usr/desktop/gnome + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64le/17.0/desktop/gnome/systemd/merged-usr/deprecated b/profiles/default/linux/ppc64le/17.0/desktop/gnome/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..1b0374bba685 --- /dev/null +++ b/profiles/default/linux/ppc64le/17.0/desktop/gnome/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64le/23.0/desktop/gnome/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64le/17.0/desktop/plasma/deprecated b/profiles/default/linux/ppc64le/17.0/desktop/plasma/deprecated new file mode 100644 index 000000000000..7d25eb99fd37 --- /dev/null +++ b/profiles/default/linux/ppc64le/17.0/desktop/plasma/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64le/23.0/split-usr/desktop/plasma + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64le/17.0/desktop/plasma/systemd/merged-usr/deprecated b/profiles/default/linux/ppc64le/17.0/desktop/plasma/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..225eb9579cba --- /dev/null +++ b/profiles/default/linux/ppc64le/17.0/desktop/plasma/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64le/23.0/desktop/plasma/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64le/17.0/desktop/systemd/merged-usr/deprecated b/profiles/default/linux/ppc64le/17.0/desktop/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..31f5006e0ca7 --- /dev/null +++ b/profiles/default/linux/ppc64le/17.0/desktop/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64le/23.0/desktop/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64le/17.0/developer/deprecated b/profiles/default/linux/ppc64le/17.0/developer/deprecated new file mode 100644 index 000000000000..ee7320f6f7c6 --- /dev/null +++ b/profiles/default/linux/ppc64le/17.0/developer/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64le/23.0/split-usr + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64le/17.0/ieee-long-double/deprecated b/profiles/default/linux/ppc64le/17.0/ieee-long-double/deprecated new file mode 100644 index 000000000000..ee7320f6f7c6 --- /dev/null +++ b/profiles/default/linux/ppc64le/17.0/ieee-long-double/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64le/23.0/split-usr + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64le/17.0/musl/deprecated b/profiles/default/linux/ppc64le/17.0/musl/deprecated new file mode 100644 index 000000000000..f439ee75b0df --- /dev/null +++ b/profiles/default/linux/ppc64le/17.0/musl/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64le/23.0/split-usr/musl + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64le/17.0/musl/hardened/deprecated b/profiles/default/linux/ppc64le/17.0/musl/hardened/deprecated new file mode 100644 index 000000000000..41718e4bc2b7 --- /dev/null +++ b/profiles/default/linux/ppc64le/17.0/musl/hardened/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64le/23.0/split-usr/musl/hardened + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/ppc64le/17.0/systemd/merged-usr/deprecated b/profiles/default/linux/ppc64le/17.0/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..e4eebc79b279 --- /dev/null +++ b/profiles/default/linux/ppc64le/17.0/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/ppc64le/23.0/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64/deprecated new file mode 100644 index 000000000000..e49def3f4967 --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/split-usr/lp64 + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/deprecated new file mode 100644 index 000000000000..6c2be8c5f679 --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/split-usr/lp64/desktop + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/gnome/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/gnome/deprecated new file mode 100644 index 000000000000..fb525dece1c2 --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/gnome/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/split-usr/lp64/desktop/gnome + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/gnome/systemd/merged-usr/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/gnome/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..b9f28caee6ad --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/gnome/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/lp64/desktop/gnome/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/plasma/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/plasma/deprecated new file mode 100644 index 000000000000..8d8c0756f87d --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/plasma/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/split-usr/lp64/desktop/plasma + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/plasma/systemd/merged-usr/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/plasma/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..beb2580f569e --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/plasma/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/lp64/desktop/plasma/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/systemd/merged-usr/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..338c8842c0f0 --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64/desktop/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/lp64/desktop/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64/musl/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64/musl/deprecated new file mode 100644 index 000000000000..892b778d212c --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64/musl/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/split-usr/lp64/musl + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64/systemd/merged-usr/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..b7fc6f92311e --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/lp64/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64d/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/deprecated new file mode 100644 index 000000000000..540d5a7a8b20 --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/split-usr/lp64d + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/deprecated new file mode 100644 index 000000000000..5e2131dd0c9b --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/split-usr/lp64d/desktop + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/gnome/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/gnome/deprecated new file mode 100644 index 000000000000..2364215f9525 --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/gnome/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/split-usr/lp64d/desktop/gnome + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/gnome/systemd/merged-usr/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/gnome/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..bb4966dda923 --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/gnome/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/lp64d/desktop/gnome/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/plasma/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/plasma/deprecated new file mode 100644 index 000000000000..41bf9a8a889c --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/plasma/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/split-usr/lp64d/desktop/plasma + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/plasma/systemd/merged-usr/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/plasma/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..a6e661c9749b --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/plasma/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/lp64d/desktop/plasma/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/systemd/merged-usr/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..b551ec79fb17 --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/desktop/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/lp64d/desktop/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64d/musl/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/musl/deprecated new file mode 100644 index 000000000000..d7c4a35e16c3 --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/musl/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/split-usr/lp64d/musl + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/lp64d/systemd/merged-usr/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..cb41936251b2 --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/lp64d/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/lp64d/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/multilib/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/multilib/deprecated new file mode 100644 index 000000000000..a4771c0b41b7 --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/multilib/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/split-usr/multilib + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/riscv/20.0/rv64gc/multilib/systemd/merged-usr/deprecated b/profiles/default/linux/riscv/20.0/rv64gc/multilib/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..80d5cdfc4ead --- /dev/null +++ b/profiles/default/linux/riscv/20.0/rv64gc/multilib/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/riscv/23.0/rv64/multilib/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/s390/17.0/deprecated b/profiles/default/linux/s390/17.0/deprecated new file mode 100644 index 000000000000..61ac072431c1 --- /dev/null +++ b/profiles/default/linux/s390/17.0/deprecated @@ -0,0 +1,104 @@ +default/linux/s390/23.0/split-usr + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/s390/17.0/s390x/deprecated b/profiles/default/linux/s390/17.0/s390x/deprecated new file mode 100644 index 000000000000..c11e580933f3 --- /dev/null +++ b/profiles/default/linux/s390/17.0/s390x/deprecated @@ -0,0 +1,104 @@ +default/linux/s390/23.0/split-usr/s390x + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/s390/17.0/s390x/systemd/merged-usr/deprecated b/profiles/default/linux/s390/17.0/s390x/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..c0dbaaa46ccf --- /dev/null +++ b/profiles/default/linux/s390/17.0/s390x/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/s390/23.0/s390x/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/s390/17.0/systemd/merged-usr/deprecated b/profiles/default/linux/s390/17.0/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..7f3fc08d2879 --- /dev/null +++ b/profiles/default/linux/s390/17.0/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/s390/23.0/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/sparc/17.0/64ul/deprecated b/profiles/default/linux/sparc/17.0/64ul/deprecated new file mode 100644 index 000000000000..74bb6bf3aef0 --- /dev/null +++ b/profiles/default/linux/sparc/17.0/64ul/deprecated @@ -0,0 +1,104 @@ +default/linux/sparc/23.0/split-usr/64ul + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/sparc/17.0/64ul/desktop/deprecated b/profiles/default/linux/sparc/17.0/64ul/desktop/deprecated new file mode 100644 index 000000000000..18cc090c46ed --- /dev/null +++ b/profiles/default/linux/sparc/17.0/64ul/desktop/deprecated @@ -0,0 +1,104 @@ +default/linux/sparc/23.0/split-usr/64ul/desktop + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/sparc/17.0/64ul/developer/deprecated b/profiles/default/linux/sparc/17.0/64ul/developer/deprecated new file mode 100644 index 000000000000..74bb6bf3aef0 --- /dev/null +++ b/profiles/default/linux/sparc/17.0/64ul/developer/deprecated @@ -0,0 +1,104 @@ +default/linux/sparc/23.0/split-usr/64ul + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/sparc/17.0/64ul/systemd/merged-usr/deprecated b/profiles/default/linux/sparc/17.0/64ul/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..a1b8be4d89d4 --- /dev/null +++ b/profiles/default/linux/sparc/17.0/64ul/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/sparc/23.0/64ul/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/sparc/17.0/deprecated b/profiles/default/linux/sparc/17.0/deprecated new file mode 100644 index 000000000000..60588d75d06b --- /dev/null +++ b/profiles/default/linux/sparc/17.0/deprecated @@ -0,0 +1,104 @@ +default/linux/sparc/23.0/split-usr + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/sparc/17.0/desktop/deprecated b/profiles/default/linux/sparc/17.0/desktop/deprecated new file mode 100644 index 000000000000..954e06165107 --- /dev/null +++ b/profiles/default/linux/sparc/17.0/desktop/deprecated @@ -0,0 +1,104 @@ +default/linux/sparc/23.0/split-usr/desktop + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/sparc/17.0/developer/deprecated b/profiles/default/linux/sparc/17.0/developer/deprecated new file mode 100644 index 000000000000..60588d75d06b --- /dev/null +++ b/profiles/default/linux/sparc/17.0/developer/deprecated @@ -0,0 +1,104 @@ +default/linux/sparc/23.0/split-usr + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/sparc/17.0/systemd/merged-usr/deprecated b/profiles/default/linux/sparc/17.0/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..f43dfd7a92d6 --- /dev/null +++ b/profiles/default/linux/sparc/17.0/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ +default/linux/sparc/23.0/systemd + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/x86/17.0/deprecated b/profiles/default/linux/x86/17.0/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/x86/17.0/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/x86/17.0/desktop/deprecated b/profiles/default/linux/x86/17.0/desktop/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/x86/17.0/desktop/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/x86/17.0/desktop/gnome/deprecated b/profiles/default/linux/x86/17.0/desktop/gnome/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/x86/17.0/desktop/gnome/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/x86/17.0/desktop/gnome/systemd/merged-usr/deprecated b/profiles/default/linux/x86/17.0/desktop/gnome/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/x86/17.0/desktop/gnome/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/x86/17.0/desktop/plasma/deprecated b/profiles/default/linux/x86/17.0/desktop/plasma/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/x86/17.0/desktop/plasma/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/x86/17.0/desktop/plasma/systemd/merged-usr/deprecated b/profiles/default/linux/x86/17.0/desktop/plasma/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/x86/17.0/desktop/plasma/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/x86/17.0/developer/deprecated b/profiles/default/linux/x86/17.0/developer/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/x86/17.0/developer/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/x86/17.0/hardened/deprecated b/profiles/default/linux/x86/17.0/hardened/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/x86/17.0/hardened/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/x86/17.0/hardened/selinux/deprecated b/profiles/default/linux/x86/17.0/hardened/selinux/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/x86/17.0/hardened/selinux/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/x86/17.0/musl/deprecated b/profiles/default/linux/x86/17.0/musl/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/x86/17.0/musl/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/x86/17.0/musl/selinux/deprecated b/profiles/default/linux/x86/17.0/musl/selinux/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/x86/17.0/musl/selinux/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/x86/17.0/selinux/deprecated b/profiles/default/linux/x86/17.0/selinux/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/x86/17.0/selinux/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work diff --git a/profiles/default/linux/x86/17.0/systemd/merged-usr/deprecated b/profiles/default/linux/x86/17.0/systemd/merged-usr/deprecated new file mode 100644 index 000000000000..063fe9af04c0 --- /dev/null +++ b/profiles/default/linux/x86/17.0/systemd/merged-usr/deprecated @@ -0,0 +1,104 @@ + + +A profile upgrade to version 23.0 is available for your architecture. +The new 23.0 profiles enable some toolchain hardening features and +performance enhancements by default, and standardize settings. +You can find the list of changes on the wiki tracking page [1]. + +Upgrade instructions + +Note 1: If you have manually changed your CHOST to a value different from +what the stages and profiles set, you may have to do that in the future too. +In that case you should know what you are doing, hopefully; please read the +instructions with a critical eye then. + +Note 2: In case you are already familiar with binary packages, you should be +able to add "--getbinpkg" to the emerge calls to speed things up. +The use of binary packages is completely optional though, and also not +as much tested as the source-based upgrade path yet. + +1. Ensure your system backups are up to date. Please also update + your system fully and depclean before proceeding. + glibc older than 2.36 and musl older than 1.2.4 is not supported anymore. + +2. If you are still using one of the long-deprecated amd64 17.0 profiles + (other than x32 or musl), then first complete the migration to the + corresponding 17.1 profile. Instructions can be found at [3]. + +3. If you are currently using systemd in a split-usr configuration, then first + complete the migration to the corresponding merged-usr profile of the + same profile version. Details on how to do this can be found in the news + item [4]. + If you are currently using openrc, migrate to 23.0 first, keeping your disk + layout. If you want to move from split-usr to merged-usr, do that afterwards. + +4. Run "emerge --info" and note down the value of the CHOST variable. + +5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable, + remove it. Also delete all lines defining CHOST_... variables. + +6. Select the 23.0 profile corresponding to your current profile, either using + "eselect profile" or by manually setting the profile symlink. + Note that old profiles are by default split-usr and the 23.0 profiles by + default merged-usr. Do NOT change directory scheme now, since this will + mess up your system! + Instead, make sure that the new profile has the same property: for example, + OLD default/linux/amd64/17.1 + ==> NEW default/linux/amd64/23.0/split-usr + (added "split-usr") + OLD default/linux/amd64/17.1/systemd/merged-usr + ==> NEW default/linux/amd64/23.0/systemd + (removed "merged-usr") + A detailed table of the upgrade paths can be found at [5]. Please consult it. + In some cases (hppa, x86) the table will tell you to pick between two choices. + What you need should be obvious from your *old* CHOST value (from step 4). + +7. Delete the contents of your binary package cache at ${PKGDIR} + rm -r /var/cache/binpkgs/* + +8. In the file or directory /etc/portage/binrepos.conf (if existing), update + the URI in all configuration such that they point to 23.0 profile binhost + directories. The exact paths can be found in the table at [5], too. + +9. Rebuild or reinstall from binary (if available) the following packages in + this order, with the same version as already active: + emerge --ask --oneshot sys-devel/binutils + (you may have to run binutils-config and re-select your binutils now) + emerge --ask --oneshot sys-devel/gcc + (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do + that; instead, abort and try again with --nodeps added to the command line.) + (you may have to run gcc-config and re-select your gcc now) + and the C library, i.e. for glibc-based systems + emerge --ask --oneshot sys-libs/glibc + or for musl-based systems + emerge --ask --oneshot sys-libs/musl + +10. Re-run "emerge --info" and check if CHOST has changed compared to step 4. + +If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, + +11. Recheck with binutils-config and gcc-config that valid installed versions + of binutils and gcc are selected. + +12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that + refer to the *OLD* CHOST value, and remove them. + Examples how to do this can be found in the similar procedure at [6]. + +13. Run env-update && source /etc/profile + +14. Re-emerge libtool: + emerge --ask --oneshot libtool + +15. Just for safety, delete the contents of your binary package cache at + ${PKGDIR} again: + rm -r /var/cache/binpkgs/* + +16. Rebuild world: + emerge --ask --emptytree @world + +[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition +[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline +[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html +[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html +[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table +[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work |