diff options
Diffstat (limited to 'net-misc/dahdi-tools/files')
10 files changed, 0 insertions, 769 deletions
diff --git a/net-misc/dahdi-tools/files/dahdi-autoconf.conf2 b/net-misc/dahdi-tools/files/dahdi-autoconf.conf2 deleted file mode 100644 index a46545231911..000000000000 --- a/net-misc/dahdi-tools/files/dahdi-autoconf.conf2 +++ /dev/null @@ -1,40 +0,0 @@ -# Global settings -# Set this to your country code. -DAHDI_ZONE=za -DAHDI_ECHOCAN=oslec # mg2,jpah,kb1,sec,sec2 (there may be more, we recommend oslec) - -# Settings for analog -#Analog signal types, one of: -# ks - KewlStart (recommended, default) -# ls - LoopStart -# gs - GroundStart - -# Signalling to be used on FXO ports -DAHDI_FXO_SIGNALLING=ks - -# Signalling to be used on FXS ports -DAHDI_FXS_SIGNALLING=ks - -# Whether or not to echocan: -DAHDI_FXO_ECHOCAN=yes -DAHDI_FXS_ECHOCAN=yes - -# These settings will be used for BRI cards. -# Known options: B8ZS,AMI,HDB3 -DAHDI_BRI_CODING=AMI - -# Known options: ESF,D4,CCS,CRC4 -DAHDI_BRI_FRAMING=CCS - -# Our experience is that it's not required (still defaults to yes) -DAHDI_BRI_NT_ECHOCAN=yes -DAHDI_BRI_TE_ECHOCAN=yes - -# These settings are for PRI cards. Note that only E1 currently supported. -DAHDI_E1_CPE_ECHOCAN=yes -DAHDI_E1_NET_ECHOCAN=yes - -# PRI will default to CPE mode (remote end provides signalling). -# If you really want to provide signalling set the appropriate spans -# here (eg, set span 1 to NET mode). -#PRI_SPAN_1_NET=yes diff --git a/net-misc/dahdi-tools/files/dahdi-autoconf.init-3.1.0-r4 b/net-misc/dahdi-tools/files/dahdi-autoconf.init-3.1.0-r4 deleted file mode 100644 index 73ab07b8904f..000000000000 --- a/net-misc/dahdi-tools/files/dahdi-autoconf.init-3.1.0-r4 +++ /dev/null @@ -1,271 +0,0 @@ -#!/sbin/openrc-run -# Copyright 1999-2011 Ultimate Linux Solutions CC -# Distributed under the terms of the GNU General Public License v2 - -depend() { - before dahdi -} - -dahdi_load_modules() { - local hwlist loc status mod mod_vname pciid desc - - hwlist=$(/usr/sbin/dahdi_hardware) - - if [ -z "${hwlist}" ]; then - einfo "No digium hardware found." - ebegin "Loading module dahdi_dummy" - /sbin/modprobe dahdi_dummy - eend $? - return - fi - - echo "${hwlist}" | while read loc mod pciid desc; do - status="${mod:${#mod}-1:1}" - mod="${mod%[+-]}" - mod_vname="mod_${mod}" - - einfo "Found $desc at $loc (module: $mod)" - - if [ "${status}" = "-" -a "${!mod_vname-notloaded}" = "notloaded" ]; then - ebegin "Loading module $mod" - /sbin/modprobe $mod - eend - - [ $? -eq 0 ] && eval "$mod_vname=loaded" - fi - done -} - -dahdi_module_unload() { - local mod=$1 s - [ -d /sys/module/${mod} ] || return 0 - - for s in $(find /sys/module/${mod}/holders -type l); do - dahdi_module_unload $(basename $s) - done - - ebegin "Removing dahdi module: $mod" - /sbin/rmmod $mod - eend $? -} - -dahdi_gen_fxo_config() { - local port=$1 - - echo "fxs${DAHDI_FXO_SIGNALLING-ks}=${port}" - [ "${DAHDI_FXO_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${port}" -} - -dahdi_gen_fxs_config() { - local port=$1 - - echo "fxo${DAHDI_FXO_SIGNALLING-ks}=${port}" - [ "${DAHDI_FXS_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${port}" -} - -dahdi_gen_bri_te_config() { - span=$1 - port=$2 - basechan=$3 - - echo "span=${span},${port},0,${DAHDI_BRI_FRAMING-CSS},${DAHDI_BRI_CODING-AMI}" - echo "bchan=${basechan}-$(( basechan + 1 ))" - echo "hardhdlc=$(( basechan + 2 ))" - [ "${DAHDI_BRI_TE_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${basechan}-$(( basechan + 1 ))" -} - -dahdi_gen_bri_nt_config() { - span=$1 - port=$2 - basechan=$3 - - echo "span=${span},0,0,${DAHDI_BRI_FRAMING-CSS},${DAHDI_BRI_CODING-AMI}" - echo "bchan=${basechan}-$(( basechan + 1 ))" - echo "hardhdlc=$(( basechan + 2 ))" - [ "${DAHDI_BRI_NT_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${basechan}-$(( basechan + 1 ))" -} - -dahdi_gen_e1_cpe_config() { - span=$1 - port=$2 - basechan=$3 - - echo "span=${span},${port},0,${DAHDI_E1_FRAMING-CCS},${DAHDI_E1_CODING-HDB3,CRC4}" - bchans="${basechan}-$(( basechan + 14 )),$(( basechan + 16 ))-$(( basechan + 30 ))" - echo "bchan=${bchans}" - echo "dchan=$(( basechan + 15 ))" - [ "${DAHDI_E1_CPE_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${bchans}" -} - -dahdi_gen_e1_net_config() { - span=$1 - port=$2 - basechan=$3 - - echo "span=${span},0,0,${DAHDI_E1_FRAMING-CCS},${DAHDI_E1_CODING-HDB3,CRC4}" - bchans="${basechan}-$(( basechan + 14 )),$(( basechan + 16 ))-$(( basechan + 30 ))" - echo "bchan=${bchans}" - echo "dchan=$(( basechan + 15 ))" - [ "${DAHDI_E1_NET_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${bchans}" -} - -dahdi_gen_t1_cpe_config() { - span=$1 - port=$2 - basechan=$3 - - echo "span=${span},${port},0,${DAHDI_T1_FRAMING-ESF},${DAHDI_T1_CODING-B8ZS}" - bchans="${basechan}-$(( basechan + 22 ))" - echo "bchan=${bchans}" - echo "dchan=$(( basechan + 23 ))" - [ "${DAHDI_T1_CPE_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${bchans}" -} - -dahdi_gen_t1_net_config() { - span=$1 - port=$2 - basechan=$3 - - echo "span=${span},0,0,${DAHDI_T1_FRAMING-ESF},${DAHDI_T1_CODING-B8ZS}" - bchans="${basechan}-$(( basechan + 22 ))" - echo "bchan=${bchans}" - echo "dchan=$(( basechan + 23 ))" - [ "${DAHDI_T1_NET_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${bchans}" -} - -dahdi_conf_span() { - local span=$1 - local type=$2 - local desc=$3 - local port=$4 - local basechan=$5 - local vname="PRI_SPAN_${span}_NET" - local cfunc="dahdi_gen_" - - # Analog we need to deal with on a port-by-port basis. - [ "${type}" = "analog" ] && return 0 - - echo "" - echo "# ${desc}" - - case "${type}" in - digital-TE) - cfunc="${cfunc}bri_te" - ;; - digital-NT) - cfunc="${cfunc}bri_nt" - ;; - digital-[TE]1) - cfunc="${cfunc}$(echo "${type##*-}" | tr 'TE' 'te')" - # Use CPE by default. Unfortunately there is no easy - # way to detect CPE vs NET as far as I know and specifying - # in a config that you want NET mode seems the sanest way. - if yesno "${vname}"; then - cfunc="${cfunc}_net" - else - cfunc="${cfunc}_cpe" - fi - ;; - *) - echo "# Don't know how to configure this (type=${type})." - echo "# Please file a bug on bugs.gentoo.org and add jaco@uls.co.za as CC." - return 1 - ;; - esac - - "${cfunc}_config" "${span}" "${port}" "${basechan}" -} - -dahdi_gen_config() { - local type manufacturer devicetype basechan aport atype - local span= - local tfile="$(mktemp)" - local sfile="$(mktemp)" - local plocation="" - local isdnport=0 - - /usr/sbin/dahdi_scan > "${sfile}" - exec 3<"${sfile}" - exec 4>"${tfile}" - - echo "# Automatically dahdi-autoconf generated file ($(date))." >&4 - echo "# This file WILL get regenerated whenever you restart dahdi-autoconf." >&4 - - while read LINE <&3; do - case "$LINE" in - \[*\]) - if [ -n "${span}" ]; then - ebegin "Configuring ${manufacturer} ${devicetype} (${name})" - dahdi_conf_span "${span}" "${type}" "${manufacturer} ${devicetype} (${name})" "${isdnport}" "${basechan}" >&4 - eend $? - fi - span="${LINE%?}" - span="${span#?}" - ;; - type=*|manufacturer=*|devicetype=*|basechan=*|name=*) - eval "${LINE%%=*}='${LINE#*=}'" - ;; - location=*) - eval "${LINE%%=*}='${LINE#*=}'" - if [ "${location}" = "${plocation}" ]; then - isdnport=$(( isdnport + 1 )) - else - plocation="${location}" - isdnport=1 - fi - ;; - port=*) - # For analog cards only. - aport="${LINE#*=}"; aport="${aport%,*}" - atype="${LINE#*,}" - if [ "${aport}" -eq "${basechan}" ]; then - echo "" >&4 - echo "# ${manufacturer} ${devicetype} (${name})" >&4 - fi - case "${atype}" in - FXO) - dahdi_gen_fxo_config $aport >&4 - ;; - FXS) - dahdi_gen_fxs_config $aport >&4 - ;; - esac - ;; - esac - done - - if [ -n "${span}" ]; then - ebegin "Configuring ${manufacturer} ${devicetype} (${name})" - dahdi_conf_span "${span}" "${type}" "${manufacturer} ${devicetype} (${name})" "${isdnport}" "${basechan}" >&4 - eend $? - fi - - echo "" >&4 - echo "loadzone = ${DAHDI_ZONE}" >&4 - echo "defaultzone = ${DAHDI_ZONE}" >&4 - echo "## END OF AUTOCONFIGURED FILE ##" >&4 - - exec 3<&- - exec 4<&- - - rm -f "${sfile}" - [ -r /etc/dahdi/system.conf ] && mv /etc/dahdi/system.conf /etc/dahdi/system.conf.bck - mv "${tfile}" /etc/dahdi/system.conf -} - -start() { - dahdi_load_modules - - if [ ! -r /dev/dahdi/ctl ]; then - eerror "No DAHDI compatible cards detected." - return 1 - fi - - ebegin "Generating DAHDI Configuration" - dahdi_gen_config - eend $? -} - -stop() { - dahdi_module_unload dahdi -} diff --git a/net-misc/dahdi-tools/files/dahdi-autoconf.init2 b/net-misc/dahdi-tools/files/dahdi-autoconf.init2 deleted file mode 100644 index 9e3de84bac26..000000000000 --- a/net-misc/dahdi-tools/files/dahdi-autoconf.init2 +++ /dev/null @@ -1,225 +0,0 @@ -#!/sbin/openrc-run -# Copyright 1999-2011 Ultimate Linux Solutions CC -# Distributed under the terms of the GNU General Public License v2 - -depend() { - before dahdi -} - -dahdi_load_modules() { - local hwlist loc status mod mod_vname pciid desc - - hwlist=$(/usr/sbin/dahdi_hardware) - - if [ -z "${hwlist}" ]; then - einfo "No digium hardware found." - ebegin "Loading module dahdi_dummy" - /sbin/modprobe dahdi_dummy - eend $? - return - fi - - echo "${hwlist}" | while read loc mod pciid desc; do - status="${mod:${#mod}-1:1}" - mod="${mod%[+-]}" - mod_vname="mod_${mod}" - - einfo "Found $desc at $loc (module: $mod)" - - if [ "${status}" = "-" -a "${!mod_vname-notloaded}" = "notloaded" ]; then - ebegin "Loading module $mod" - /sbin/modprobe $mod - eend - - [ $? -eq 0 ] && eval "$mod_vname=loaded" - fi - done -} - -dahdi_module_unload() { - local mod=$1 s - [ -d /sys/module/${mod} ] || return 0 - - for s in $(find /sys/module/${mod}/holders -type l); do - dahdi_module_unload $(basename $s) - done - - ebegin "Removing dahdi module: $mod" - /sbin/rmmod $mod - eend $? -} - -dahdi_gen_fxo_config() { - local port=$1 - - echo "fxs${DAHDI_FXO_SIGNALLING-ks}=${port}" - [ "${DAHDI_FXO_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${port}" -} - -dahdi_gen_fxs_config() { - local port=$1 - - echo "fxo${DAHDI_FXO_SIGNALLING-ks}=${port}" - [ "${DAHDI_FXS_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${port}" -} - -dahdi_gen_bri_te_config() { - span=$1 - port=$2 - basechan=$3 - - echo "span=${span},${port},0,${DAHDI_BRI_FRAMING-CSS},${DAHDI_BRI_CODING-AMI}" - echo "bchan=${basechan}-$(( basechan + 1 ))" - echo "hardhdlc=$(( basechan + 2 ))" - [ "${DAHDI_BRI_TE_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${basechan}-$(( basechan + 1 ))" -} - -dahdi_gen_bri_nt_config() { - span=$1 - port=$2 - basechan=$3 - - echo "span=${span},0,0,${DAHDI_BRI_FRAMING-CSS},${DAHDI_BRI_CODING-AMI}" - echo "bchan=${basechan}-$(( basechan + 1 ))" - echo "hardhdlc=$(( basechan + 2 ))" - [ "${DAHDI_BRI_NT_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${basechan}-$(( basechan + 1 ))" -} - -dahdi_gen_e1_cpe_config() { - span=$1 - port=$2 - basechan=$3 - - echo "span=${span},${port},0,${DAHDI_E1_FRAMING-CCS},${DAHDI_E1_CODING-HDB3,CRC4}" - bchans="${basechan}-$(( basechan + 14 )),$(( basechan + 16 ))-$(( basechan + 30 ))" - echo "bchan=${bchans}" - echo "dchan=$(( basechan + 15 ))" - [ "${DAHDI_E1_CPE_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${bchans}" -} - -dahdi_gen_e1_net_config() { - span=$1 - port=$2 - basechan=$3 - - echo "span=${span},0,0,${DAHDI_E1_FRAMING-CCS},${DAHDI_E1_CODING-HDB3,CRC4}" - bchans="${basechan}-$(( basechan + 14 )),$(( basechan + 16 ))-$(( basechan + 30 ))" - echo "bchan=${bchans}" - echo "dchan=$(( basechan + 15 ))" - [ "${DAHDI_E1_NET_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${bchans}" -} - -dahdi_conf_span() { - local span=$1 - local type=$2 - local desc=$3 - local port=$4 - local basechan=$5 - local vname="" - - # Analog we need to deal with on a port-by-port basis. - [ "${type}" = "analog" ] && return 0 - - echo -e "\n# ${desc}" - case "${type}" in - digital-TE) - dahdi_gen_bri_te_config "${span}" "${port}" "${basechan}" - ;; - digital-NT) - dahdi_gen_bri_nt_config "${span}" "${port}" "${basechan}" - ;; - digital-E1) - # Use CPE by default. Unfortunately there is no easy - # way to detect CPE vs NET as far as I know and specifying - # in a config that you want NET mode seems the sanest way. - vname="PRI_SPAN_${span}_NET" - if [[ "${!vname}" = [Yy][Ee][Ss] ]]; then - dahdi_gen_e1_net_config "${span}" "${port}" "${basechan}" - else - dahdi_gen_e1_cpe_config "${span}" "${port}" "${basechan}" - fi - ;; - *) - echo "# Don't know how to configure this (type=${type})." - echo "# Please file a bug on bugs.gentoo.org and add jaco@uls.co.za as CC." - ;; - esac -} - -dahdi_gen_config() { - local type manufacturer devicetype basechan aport atype - local span= - local tfile="$(mktemp)" - local sfile="$(mktemp)" - local plocation="" - local isdnport=0 - - /usr/sbin/dahdi_scan > "${sfile}" - exec 3<"${sfile}" - - echo "# Automatically dahdi-autoconf generated file ($(date))." >> "${tfile}" - echo "# This file WILL get regenerated whenever you restart dahdi-autoconf." >> "${tfile}" - - while read LINE <&3; do - case "$LINE" in - [[]*[]]) - [ -n "${span}" ] && dahdi_conf_span "${span}" "${type}" "${manufacturer} ${devicetype} (${name})" "${isdnport}" "${basechan}" >> "${tfile}" - span="${LINE%?}" - span="${span#?}" - ;; - type=*|manufacturer=*|devicetype=*|basechan=*|name=*) - eval "${LINE%%=*}='${LINE#*=}'" - ;; - location=*) - eval "${LINE%%=*}='${LINE#*=}'" - if [ "${location}" == "${plocation}" ]; then - (( ++isdnport )) - else - plocation="${location}" - isdnport=1 - fi - ;; - port=*) - # For analog cards only. - aport="${LINE#*=}"; aport="${aport%,*}" - atype="${LINE#*,}" - [ "${aport}" -eq "${basechan}" ] && echo -e "\n# ${manufacturer} ${devicetype} (${name})" >> "${tfile}" - case "${atype}" in - FXO) - dahdi_gen_fxo_config $aport >> "${tfile}" - ;; - FXS) - dahdi_gen_fxs_config $aport >> "${tfile}" - ;; - esac - ;; - esac - done - - [ -n "${span}" ] && dahdi_conf_span "${span}" "${type}" "${manufacturer} ${devicetype} (${name})" "${isdnport}" "${basechan}" >> "${tfile}" - - echo -e "\nloadzone = ${DAHDI_ZONE}\ndefaultzone = ${DAHDI_ZONE}\n## END OF AUTOCONFIGURED FILE ##" >> "${tfile}" - - exec 3<&- - - rm -f "${sfile}" - mv /etc/dahdi/system.conf /etc/dahdi/system.conf.bck - mv "${tfile}" /etc/dahdi/system.conf -} - -start() { - dahdi_load_modules - - if [ ! -r /dev/dahdi/ctl ]; then - eerror "No DAHDI compatible cards detected." - return 1 - fi - - ebegin "Generating DAHDI Configuration" - dahdi_gen_config - eend $? -} - -stop() { - dahdi_module_unload dahdi -} diff --git a/net-misc/dahdi-tools/files/dahdi-nondigium-blacklist.patch b/net-misc/dahdi-tools/files/dahdi-nondigium-blacklist.patch deleted file mode 100644 index 3df8f166a56c..000000000000 --- a/net-misc/dahdi-tools/files/dahdi-nondigium-blacklist.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff -uNr dahdi-tools-2.8.0.ORIG/blacklist.sample dahdi-tools-2.8.0/blacklist.sample ---- dahdi-tools-2.8.0/blacklist.sample.ORIG 2009-04-02 10:34:32.000000000 +0200 -+++ dahdi-tools-2.8.0/blacklist.sample 2010-05-24 20:46:05.000000000 +0200 -@@ -14,6 +14,8 @@ - blacklist wcb4xxp - blacklist wcaxx - blacklist wcte43x -+blacklist wcopenpci -+blacklist zaphfc - - # Some mISDN drivers may try to attach to cards supported by DAHDI. If you - # have a card which is *not* supported by DAHDI but supported by one of the diff --git a/net-misc/dahdi-tools/files/dahdi-tools-3.1.0-cplusplusexternc.patch b/net-misc/dahdi-tools/files/dahdi-tools-3.1.0-cplusplusexternc.patch deleted file mode 100644 index 37d1402c404f..000000000000 --- a/net-misc/dahdi-tools/files/dahdi-tools-3.1.0-cplusplusexternc.patch +++ /dev/null @@ -1,26 +0,0 @@ -diff --git a/./dahdi-tools-3.1.0/xpp/hexfile.h.o b/./dahdi-tools-3.1.0/xpp/hexfile.h -index 33ff50d..3d03f98 100644 ---- a/xpp/hexfile.h -+++ b/xpp/hexfile.h -@@ -70,7 +70,9 @@ struct hexdata { - }; - - --__BEGIN_DECLS -+#ifdef __cpluplus -+extern "C" { -+#endif - - typedef void (*parse_hexfile_report_func_t)(int level, const char *msg, ...) - #ifdef __GNUC__ -@@ -86,6 +88,9 @@ int dump_hexfile2(struct hexdata *hexdata, const char *outfile, uint8_t maxwidth - void dump_binary(struct hexdata *hexdata, const char *outfile); - void gen_hexline(const uint8_t *data, uint16_t addr, size_t len, FILE *output); - int bsd_checksum(struct hexdata *hexdata); --__END_DECLS -+ -+#ifdef __cpluplus -+} -+#endif - - #endif diff --git a/net-misc/dahdi-tools/files/dahdi-tools-3.1.0-execinfo.patch b/net-misc/dahdi-tools/files/dahdi-tools-3.1.0-execinfo.patch deleted file mode 100644 index b222a85d8cb9..000000000000 --- a/net-misc/dahdi-tools/files/dahdi-tools-3.1.0-execinfo.patch +++ /dev/null @@ -1,40 +0,0 @@ ---- a/configure.ac 2020-03-28 22:28:35.614340050 +0200 -+++ b/configure.ac 2020-03-28 22:28:55.084181570 +0200 -@@ -161,6 +161,7 @@ - # Checks for header files. - AC_CHECK_HEADERS([sys/soundcard.h linux/soundcard.h]) - AC_CHECK_HEADERS([arpa/inet.h fcntl.h limits.h netinet/in.h stdint.h stdlib.h string.h sys/ioctl.h sys/param.h sys/socket.h sys/time.h syslog.h unistd.h]) -+AC_CHECK_HEADERS([execinfo.h]) - - # Checks for typedefs, structures, and compiler characteristics. - AC_C_INLINE ---- a/xpp/xtalk/debug.c 2020-03-28 22:41:43.507810560 +0200 -+++ b/xpp/xtalk/debug.c 2020-03-28 22:41:10.538087608 +0200 -@@ -27,8 +27,10 @@ - #include <stdarg.h> - #include <syslog.h> --#include <execinfo.h> - #include <xtalk/debug.h> - #include <autoconfig.h> -+#ifdef HAVE_EXECINFO_H -+#include <execinfo.h> -+#endif - - int verbose = LOG_INFO; - int debug_mask; -@@ -61,6 +63,7 @@ - /* from glibc info(1) */ - void print_backtrace(FILE *fp) - { -+#ifdef HAVE_EXECINFO_H - void *array[10]; - size_t size; - char **strings; -@@ -71,4 +74,7 @@ - for (i = 0; i < size; i++) - fprintf(fp, "%s\n", strings[i]); - free(strings); -+#else -+ fprintf(fp, "backtrace information only available if execinfo.h is available.\n"); -+#endif - } diff --git a/net-misc/dahdi-tools/files/dahdi-tools-3.1.0-fno-common.patch b/net-misc/dahdi-tools/files/dahdi-tools-3.1.0-fno-common.patch deleted file mode 100644 index 3ca5bd2aa09b..000000000000 --- a/net-misc/dahdi-tools/files/dahdi-tools-3.1.0-fno-common.patch +++ /dev/null @@ -1,39 +0,0 @@ -diff --git a/xpp/mpptalk.c b/xpp/mpptalk.c -index fdb34f1..8fb3687 100644 ---- a/xpp/mpptalk.c -+++ b/xpp/mpptalk.c -@@ -237,7 +237,7 @@ union XTALK_PDATA(MPP) { - MEMBER(MPP, TWS_PORT_GET_REPLY); - MEMBER(MPP, TWS_PWR_GET); - MEMBER(MPP, TWS_PWR_GET_REPLY); --} PACKED members; -+} PACKED; - - /* - * Statuses -diff --git a/xpp/xtalk/xtalk_raw.c b/xpp/xtalk/xtalk_raw.c -index 49e47d5..251a502 100644 ---- a/xpp/xtalk/xtalk_raw.c -+++ b/xpp/xtalk/xtalk_raw.c -@@ -48,7 +48,7 @@ CMD_DEF(XTALK, ACK, - - union XTALK_PDATA(XTALK) { - MEMBER(XTALK, ACK); --} PACKED members; -+} PACKED; - - const struct xtalk_protocol xtalk_raw_proto = { - .name = "XTALK-RAW", -diff --git a/xpp/xtalk/xtalk_sync.c b/xpp/xtalk/xtalk_sync.c -index 18a5cad..ffa79d2 100644 ---- a/xpp/xtalk/xtalk_sync.c -+++ b/xpp/xtalk/xtalk_sync.c -@@ -60,7 +60,7 @@ union XTALK_PDATA(XTALK) { - MEMBER(XTALK, ACK); - MEMBER(XTALK, PROTO_GET); - MEMBER(XTALK, PROTO_GET_REPLY); --} PACKED members; -+} PACKED; - - const struct xtalk_protocol xtalk_sync_proto = { - .name = "XTALK-SYNC", diff --git a/net-misc/dahdi-tools/files/dahdi-tools-3.1.0-parallel-make-no-config.patch b/net-misc/dahdi-tools/files/dahdi-tools-3.1.0-parallel-make-no-config.patch deleted file mode 100644 index 9575966435e7..000000000000 --- a/net-misc/dahdi-tools/files/dahdi-tools-3.1.0-parallel-make-no-config.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- dahdi-tools-3.1.0/Makefile.am.o 2020-01-09 12:23:37.943059915 +0200 -+++ dahdi-tools-3.1.0/Makefile.am 2020-01-09 12:23:58.863036654 +0200 -@@ -1,7 +1,7 @@ - ACLOCAL_AMFLAGS = -I m4 - - LEGACY_MAKE = \ -- $(MAKE) -f $(srcdir)/Makefile.legacy \ -+ +$(MAKE) -f $(srcdir)/Makefile.legacy \ - top_srcdir=$(top_srcdir) \ - srcdir=$(srcdir) - -@@ -131,7 +131,6 @@ - install -m644 init.conf.sample $(DESTDIR)$(dahdiconfdir)/init.conf - install -m644 blacklist.sample $(DESTDIR)$(sysconfdir)/modprobe.d/dahdi-blacklist.conf - install -m644 modprobe.conf.sample $(DESTDIR)$(sysconfdir)/modprobe.d/dahdi.conf -- $(LEGACY_MAKE) config - - dahdiconfdir = @sysconfdir@/dahdi - dahdiconf_DATA = \ diff --git a/net-misc/dahdi-tools/files/dahdi-tools-3.2.0-lto.patch b/net-misc/dahdi-tools/files/dahdi-tools-3.2.0-lto.patch deleted file mode 100644 index 75f6c1a93eee..000000000000 --- a/net-misc/dahdi-tools/files/dahdi-tools-3.2.0-lto.patch +++ /dev/null @@ -1,61 +0,0 @@ -From bc45d96413902e0ded093908bc3a02410d799e24 Mon Sep 17 00:00:00 2001 -From: Jaco Kroon <jaco@uls.co.za> -Date: Thu, 11 May 2023 17:28:02 +0200 -Subject: [PATCH] Fix compilation with LTO. - ---- - xpp/echo_loader.c | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -diff --git a/xpp/echo_loader.c b/xpp/echo_loader.c -index 827f6ef..adfb1f4 100644 ---- a/xpp/echo_loader.c -+++ b/xpp/echo_loader.c -@@ -409,7 +409,7 @@ UINT32 Oct6100UserGetTime(tPOCT6100_GET_TIME f_pTime) - struct timeval tv; - unsigned long long total_usecs; - unsigned int mask = ~0; -- -+ - gettimeofday(&tv, 0); - total_usecs = (((unsigned long long)(tv.tv_sec)) * 1000000) + - (((unsigned long long)(tv.tv_usec))); -@@ -564,7 +564,7 @@ UINT32 Oct6100UserDriverReadBurstApi(tPOCT6100_READ_BURST_PARAMS f_pBurstParams) - return cOCT6100_ERR_OK; - } - --inline int get_ver(struct astribank *astribank) -+static inline int get_ver(struct astribank *astribank) - { - return spi_send(astribank, 0, 0, 1, 1); - } -@@ -647,7 +647,7 @@ UINT32 init_octasic(char *filename, struct astribank *astribank, struct span_spe - /* General parameters */ - OpenChip.fEnableChannelRecording = TRUE; - -- /* Chip ID.*/ -+ /* Chip ID.*/ - OpenChip.ulUserChipId = 1; - - /* Set the max number of accesses to 1024 to speed things up */ -@@ -775,7 +775,7 @@ UINT32 init_octasic(char *filename, struct astribank *astribank, struct span_spe - ChannelOpen.VqeConfig.fRinDcOffsetRemoval = TRUE; - ChannelOpen.VqeConfig.fSinDcOffsetRemoval = TRUE; - -- ChannelOpen.VqeConfig.ulComfortNoiseMode = cOCT6100_COMFORT_NOISE_NORMAL; -+ ChannelOpen.VqeConfig.ulComfortNoiseMode = cOCT6100_COMFORT_NOISE_NORMAL; - /* cOCT6100_COMFORT_NOISE_NORMAL - cOCT6100_COMFORT_NOISE_EXTENDED, - cOCT6100_COMFORT_NOISE_OFF, -@@ -824,7 +824,7 @@ UINT32 init_octasic(char *filename, struct astribank *astribank, struct span_spe - ChannelOpen.VqeConfig.fRinDcOffsetRemoval = TRUE; - ChannelOpen.VqeConfig.fSinDcOffsetRemoval = TRUE; - -- ChannelOpen.VqeConfig.ulComfortNoiseMode = cOCT6100_COMFORT_NOISE_NORMAL; -+ ChannelOpen.VqeConfig.ulComfortNoiseMode = cOCT6100_COMFORT_NOISE_NORMAL; - /* cOCT6100_COMFORT_NOISE_NORMAL - cOCT6100_COMFORT_NOISE_EXTENDED, - cOCT6100_COMFORT_NOISE_OFF, --- -2.39.3 - diff --git a/net-misc/dahdi-tools/files/dahdi.init2 b/net-misc/dahdi-tools/files/dahdi.init2 deleted file mode 100644 index d3abf3c4e61e..000000000000 --- a/net-misc/dahdi-tools/files/dahdi.init2 +++ /dev/null @@ -1,36 +0,0 @@ -#!/sbin/openrc-run -# Copyright 1999-2008 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -depend() { - need net -} - -checkconfig() { - if [ ! -f /etc/dahdi/system.conf ]; then - eerror "/etc/dahdi/system.conf not found. Nothing to do." - return 1 - fi - - return 0 -} - -start() { - checkconfig || return 1 - - ebegin "Starting DAHDI" - /usr/sbin/dahdi_cfg - eend $? - - if [ $? -eq 0 -a -r /etc/fxotune.conf ]; then - ebegin "Loading DAHDI fxotune.conf" - /usr/sbin/fxotune -s - eend $? - fi -} - -stop() { - ebegin "Stopping DAHDI" - /usr/sbin/dahdi_cfg -s - eend -} |