diff options
Diffstat (limited to 'net-misc/dahdi-tools/files/dahdi-autoconf.conf2')
| -rw-r--r-- | net-misc/dahdi-tools/files/dahdi-autoconf.conf2 | 40 |
1 files changed, 0 insertions, 40 deletions
diff --git a/net-misc/dahdi-tools/files/dahdi-autoconf.conf2 b/net-misc/dahdi-tools/files/dahdi-autoconf.conf2 deleted file mode 100644 index a46545231911..000000000000 --- a/net-misc/dahdi-tools/files/dahdi-autoconf.conf2 +++ /dev/null @@ -1,40 +0,0 @@ -# Global settings -# Set this to your country code. -DAHDI_ZONE=za -DAHDI_ECHOCAN=oslec # mg2,jpah,kb1,sec,sec2 (there may be more, we recommend oslec) - -# Settings for analog -#Analog signal types, one of: -# ks - KewlStart (recommended, default) -# ls - LoopStart -# gs - GroundStart - -# Signalling to be used on FXO ports -DAHDI_FXO_SIGNALLING=ks - -# Signalling to be used on FXS ports -DAHDI_FXS_SIGNALLING=ks - -# Whether or not to echocan: -DAHDI_FXO_ECHOCAN=yes -DAHDI_FXS_ECHOCAN=yes - -# These settings will be used for BRI cards. -# Known options: B8ZS,AMI,HDB3 -DAHDI_BRI_CODING=AMI - -# Known options: ESF,D4,CCS,CRC4 -DAHDI_BRI_FRAMING=CCS - -# Our experience is that it's not required (still defaults to yes) -DAHDI_BRI_NT_ECHOCAN=yes -DAHDI_BRI_TE_ECHOCAN=yes - -# These settings are for PRI cards. Note that only E1 currently supported. -DAHDI_E1_CPE_ECHOCAN=yes -DAHDI_E1_NET_ECHOCAN=yes - -# PRI will default to CPE mode (remote end provides signalling). -# If you really want to provide signalling set the appropriate spans -# here (eg, set span 1 to NET mode). -#PRI_SPAN_1_NET=yes |