diff options
Diffstat (limited to 'net-analyzer/zabbix/files/3.0/zabbix_agentd.conf')
| -rw-r--r-- | net-analyzer/zabbix/files/3.0/zabbix_agentd.conf | 390 |
1 files changed, 0 insertions, 390 deletions
diff --git a/net-analyzer/zabbix/files/3.0/zabbix_agentd.conf b/net-analyzer/zabbix/files/3.0/zabbix_agentd.conf deleted file mode 100644 index 5ff17ce33d65..000000000000 --- a/net-analyzer/zabbix/files/3.0/zabbix_agentd.conf +++ /dev/null @@ -1,390 +0,0 @@ -# This is a configuration file for Zabbix agent daemon (Unix) -# To get more information about Zabbix, visit http://www.zabbix.com - -############ GENERAL PARAMETERS ################# - -### Option: PidFile -# Name of PID file. -# -# Mandatory: no -# Default: -# PidFile=/tmp/zabbix_agentd.pid -PidFile=/run/zabbix/zabbix_agentd.pid - -### Option: LogType -# Specifies where log messages are written to: -# system - syslog -# file - file specified with LogFile parameter -# console - standard output -# -# Mandatory: no -# Default: -# LogType=file - -### Option: LogFile -# Log file name for LogType 'file' parameter. -# -# Mandatory: no -# Default: -# LogFile= - -LogFile=/var/log/zabbix/zabbix_agentd.log - -### Option: LogFileSize -# Maximum size of log file in MB. -# 0 - disable automatic log rotation. -# -# Mandatory: no -# Range: 0-1024 -# Default: -# LogFileSize=1 -LogFileSize=128 - -### Option: DebugLevel -# Specifies debug level: -# 0 - basic information about starting and stopping of Zabbix processes -# 1 - critical information -# 2 - error information -# 3 - warnings -# 4 - for debugging (produces lots of information) -# 5 - extended debugging (produces even more information) -# -# Mandatory: no -# Range: 0-5 -# Default: -# DebugLevel=3 - -### Option: SourceIP -# Source IP address for outgoing connections. -# -# Mandatory: no -# Default: -# SourceIP= - -### Option: EnableRemoteCommands -# Whether remote commands from Zabbix server are allowed. -# 0 - not allowed -# 1 - allowed -# -# Mandatory: no -# Default: -# EnableRemoteCommands=0 - -### Option: LogRemoteCommands -# Enable logging of executed shell commands as warnings. -# 0 - disabled -# 1 - enabled -# -# Mandatory: no -# Default: -# LogRemoteCommands=0 - -##### Passive checks related - -### Option: Server -# List of comma delimited IP addresses (or hostnames) of Zabbix servers. -# Incoming connections will be accepted only from the hosts listed here. -# If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally. -# -# Mandatory: no -# Default: -# Server= - -Server=127.0.0.1 - -### Option: ListenPort -# Agent will listen on this port for connections from the server. -# -# Mandatory: no -# Range: 1024-32767 -# Default: -# ListenPort=10050 - -### Option: ListenIP -# List of comma delimited IP addresses that the agent should listen on. -# First IP address is sent to Zabbix server if connecting to it to retrieve list of active checks. -# -# Mandatory: no -# Default: -# ListenIP=0.0.0.0 - -### Option: StartAgents -# Number of pre-forked instances of zabbix_agentd that process passive checks. -# If set to 0, disables passive checks and the agent will not listen on any TCP port. -# -# Mandatory: no -# Range: 0-100 -# Default: -# StartAgents=3 - -##### Active checks related - -### Option: ServerActive -# List of comma delimited IP:port (or hostname:port) pairs of Zabbix servers for active checks. -# If port is not specified, default port is used. -# IPv6 addresses must be enclosed in square brackets if port for that host is specified. -# If port is not specified, square brackets for IPv6 addresses are optional. -# If this parameter is not specified, active checks are disabled. -# Example: ServerActive=127.0.0.1:20051,zabbix.domain,[::1]:30051,::1,[12fc::1] -# -# Mandatory: no -# Default: -# ServerActive= - -ServerActive=127.0.0.1 - -### Option: Hostname -# Unique, case sensitive hostname. -# Required for active checks and must match hostname as configured on the server. -# Value is acquired from HostnameItem if undefined. -# -# Mandatory: no -# Default: -# Hostname= - -Hostname=Zabbix server - -### Option: HostnameItem -# Item used for generating Hostname if it is undefined. Ignored if Hostname is defined. -# Does not support UserParameters or aliases. -# -# Mandatory: no -# Default: -# HostnameItem=system.hostname - -### Option: HostMetadata -# Optional parameter that defines host metadata. -# Host metadata is used at host auto-registration process. -# An agent will issue an error and not start if the value is over limit of 255 characters. -# If not defined, value will be acquired from HostMetadataItem. -# -# Mandatory: no -# Range: 0-255 characters -# Default: -# HostMetadata= - -### Option: HostMetadataItem -# Optional parameter that defines an item used for getting host metadata. -# Host metadata is used at host auto-registration process. -# During an auto-registration request an agent will log a warning message if -# the value returned by specified item is over limit of 255 characters. -# This option is only used when HostMetadata is not defined. -# -# Mandatory: no -# Default: -# HostMetadataItem= - -### Option: RefreshActiveChecks -# How often list of active checks is refreshed, in seconds. -# -# Mandatory: no -# Range: 60-3600 -# Default: -# RefreshActiveChecks=120 - -### Option: BufferSend -# Do not keep data longer than N seconds in buffer. -# -# Mandatory: no -# Range: 1-3600 -# Default: -# BufferSend=5 - -### Option: BufferSize -# Maximum number of values in a memory buffer. The agent will send -# all collected data to Zabbix Server or Proxy if the buffer is full. -# -# Mandatory: no -# Range: 2-65535 -# Default: -# BufferSize=100 - -### Option: MaxLinesPerSecond -# Maximum number of new lines the agent will send per second to Zabbix Server -# or Proxy processing 'log' and 'logrt' active checks. -# The provided value will be overridden by the parameter 'maxlines', -# provided in 'log' or 'logrt' item keys. -# -# Mandatory: no -# Range: 1-1000 -# Default: -# MaxLinesPerSecond=20 - -############ ADVANCED PARAMETERS ################# - -### Option: Alias -# Sets an alias for an item key. It can be used to substitute long and complex item key with a smaller and simpler one. -# Multiple Alias parameters may be present. Multiple parameters with the same Alias key are not allowed. -# Different Alias keys may reference the same item key. -# For example, to retrieve the ID of user 'zabbix': -# Alias=zabbix.userid:vfs.file.regexp[/etc/passwd,^zabbix:.:([0-9]+),,,,\1] -# Now shorthand key zabbix.userid may be used to retrieve data. -# Aliases can be used in HostMetadataItem but not in HostnameItem parameters. -# -# Mandatory: no -# Range: -# Default: - -### Option: Timeout -# Spend no more than Timeout seconds on processing -# -# Mandatory: no -# Range: 1-30 -# Default: -# Timeout=3 - -### Option: AllowRoot -# Allow the agent to run as 'root'. If disabled and the agent is started by 'root', the agent -# will try to switch to the user specified by the User configuration option instead. -# Has no effect if started under a regular user. -# 0 - do not allow -# 1 - allow -# -# Mandatory: no -# Default: -# AllowRoot=0 - -### Option: User -# Drop privileges to a specific, existing user on the system. -# Only has effect if run as 'root' and AllowRoot is disabled. -# -# Mandatory: no -# Default: -# User=zabbix - -### Option: Include -# You may include individual files or all files in a directory in the configuration file. -# Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time. -# -# Mandatory: no -# Default: -# Include= - -# Include=/usr/local/etc/zabbix_agentd.userparams.conf -# Include=/usr/local/etc/zabbix_agentd.conf.d/ -# Include=/usr/local/etc/zabbix_agentd.conf.d/*.conf - -####### USER-DEFINED MONITORED PARAMETERS ####### - -### Option: UnsafeUserParameters -# Allow all characters to be passed in arguments to user-defined parameters. -# The following characters are not allowed: -# \ ' " ` * ? [ ] { } ~ $ ! & ; ( ) < > | # @ -# Additionally, newline characters are not allowed. -# 0 - do not allow -# 1 - allow -# -# Mandatory: no -# Range: 0-1 -# Default: -# UnsafeUserParameters=0 - -### Option: UserParameter -# User-defined parameter to monitor. There can be several user-defined parameters. -# Format: UserParameter=<key>,<shell command> -# See 'zabbix_agentd' directory for examples. -# -# Mandatory: no -# Default: -# UserParameter= - -####### LOADABLE MODULES ####### - -### Option: LoadModulePath -# Full path to location of agent modules. -# Default depends on compilation options. -# -# Mandatory: no -# Default: -# LoadModulePath=${libdir}/modules - -### Option: LoadModule -# Module to load at agent startup. Modules are used to extend functionality of the agent. -# Format: LoadModule=<module.so> -# The modules must be located in directory specified by LoadModulePath. -# It is allowed to include multiple LoadModule parameters. -# -# Mandatory: no -# Default: -# LoadModule= - -####### TLS-RELATED PARAMETERS ####### - -### Option: TLSConnect -# How the agent should connect to server or proxy. Used for active checks. -# Only one value can be specified: -# unencrypted - connect without encryption -# psk - connect using TLS and a pre-shared key -# cert - connect using TLS and a certificate -# -# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection) -# Default: -# TLSConnect=unencrypted - -### Option: TLSAccept -# What incoming connections to accept. -# Multiple values can be specified, separated by comma: -# unencrypted - accept connections without encryption -# psk - accept connections secured with TLS and a pre-shared key -# cert - accept connections secured with TLS and a certificate -# -# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection) -# Default: -# TLSAccept=unencrypted - -### Option: TLSCAFile -# Full pathname of a file containing the top-level CA(s) certificates for -# peer certificate verification. -# -# Mandatory: no -# Default: -# TLSCAFile= - -### Option: TLSCRLFile -# Full pathname of a file containing revoked certificates. -# -# Mandatory: no -# Default: -# TLSCRLFile= - -### Option: TLSServerCertIssuer -# Allowed server certificate issuer. -# -# Mandatory: no -# Default: -# TLSServerCertIssuer= - -### Option: TLSServerCertSubject -# Allowed server certificate subject. -# -# Mandatory: no -# Default: -# TLSServerCertSubject= - -### Option: TLSCertFile -# Full pathname of a file containing the agent certificate or certificate chain. -# -# Mandatory: no -# Default: -# TLSCertFile= - -### Option: TLSKeyFile -# Full pathname of a file containing the agent private key. -# -# Mandatory: no -# Default: -# TLSKeyFile= - -### Option: TLSPSKIdentity -# Unique, case sensitive string used to identify the pre-shared key. -# -# Mandatory: no -# Default: -# TLSPSKIdentity= - -### Option: TLSPSKFile -# Full pathname of a file containing the pre-shared key. -# -# Mandatory: no -# Default: -# TLSPSKFile= |