diff options
author | V3n3RiX <venerix@koprulu.sector> | 2023-03-07 05:56:17 +0000 |
---|---|---|
committer | V3n3RiX <venerix@koprulu.sector> | 2023-03-07 05:56:17 +0000 |
commit | 32f67cc4163d5c6e094345e920ada52367df5f5f (patch) | |
tree | 76cbc37c2db56951b580f369bd3a6f0b807582f5 /sys-kernel/mips-sources/mips-sources-5.4.214.ebuild | |
parent | f704f050bfdcc3bad4cd597edcce143ca6133848 (diff) |
gentoo auto-resync : 07:03:2023 - 05:56:17
Diffstat (limited to 'sys-kernel/mips-sources/mips-sources-5.4.214.ebuild')
-rw-r--r-- | sys-kernel/mips-sources/mips-sources-5.4.214.ebuild | 344 |
1 files changed, 0 insertions, 344 deletions
diff --git a/sys-kernel/mips-sources/mips-sources-5.4.214.ebuild b/sys-kernel/mips-sources/mips-sources-5.4.214.ebuild deleted file mode 100644 index a5221ea90099..000000000000 --- a/sys-kernel/mips-sources/mips-sources-5.4.214.ebuild +++ /dev/null @@ -1,344 +0,0 @@ -# Copyright 1999-2022 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -# EAPI Version -EAPI="8" - -#//------------------------------------------------------------------------------ - -# Version Data -GENPATCHREV="7" # Tarball revision for patches - -# Directories -S="${WORKDIR}/linux-${OKV}" -MIPS_PATCHES="${WORKDIR}/mips-patches" - -# Kernel-2 Vars -K_SECURITY_UNSUPPORTED="yes" -K_NOUSENAME="yes" -K_NOSETEXTRAVERSION="yes" -K_NOUSEPR="yes" -K_BASE_VER="5.3" -K_FROM_GIT="yes" -ETYPE="sources" - -# Inherit Eclasses -inherit kernel-2 -detect_version - -# Version Data -F_KV="${PVR}" -BASE_KV="$(ver_cut 1-2)" -[[ "${EXTRAVERSION}" = -rc* ]] && KVE="${EXTRAVERSION}" - -# Portage Vars -HOMEPAGE="https://wiki.gentoo.org/wiki/Project:MIPS" -KEYWORDS="-* ~mips" -IUSE="experimental ip27 ip28 ip30 symlink" - -# Specify any patches or patch familes to NOT apply here. -# Use only the 4-digit number followed by a '*'. -P_EXCLUDE="" - -# Machine Support Control Variables -DO_IP22="test" # If "yes", enable IP22 support (SGI Indy, Indigo2 R4x00) -DO_IP27="yes" # IP27 support (SGI Origin) -DO_IP28="no" # IP28 support (SGI Indigo2 Impact R10000) -DO_IP30="yes" # IP30 support (SGI Octane) -DO_IP32="yes" # IP32 support (SGI O2, R5000/RM5200 Only) - -# Machine Stable Version Variables -SV_IP22="" # If set && DO_IP22 == "no", indicates last "good" IP22 version -SV_IP27="" # DO_IP27 == "no", IP27 -SV_IP28="4.19.x" # DO_IP28 == "no", IP28 -SV_IP30="" # DO_IP30 == "no", IP30 -SV_IP32="" # DO_IP32 == "no", IP32 - -DESCRIPTION="Kernel.org sources for MIPS-based machines" -SRC_URI="${KERNEL_URI} - https://dev.gentoo.org/~kumba/distfiles/${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz" - -#//------------------------------------------------------------------------------ - -err_disabled_mach() { - # Get args - local m_name="${1}" - local m_abbr="${2}" - local m_use="${3}" - local is_test="${4}" - - # Get stable version, if exists - local stable_ver="SV_${m_abbr}" - stable_ver="${!stable_ver}" - - # See if this machine needs a USE passed or skip dying - local has_use - [[ "${m_use}" != "skip" ]] \ - && has_use="USE=\"${m_use}\" " - - # Print error && (maybe) die - echo -e "" - if [[ "${is_test}" != "test" ]]; then - eerror "${m_name} Support has been disabled in this ebuild" - eerror "revision. If you wish to merge ${m_name} sources, then" - eerror "run ${has_use}emerge =mips-sources-${stable_ver}" - [[ "${m_use}" != "skip" ]] \ - && die "${m_name} Support disabled." - else - ewarn "${m_name} Support has been marked as needing testing in this" - ewarn "ebuild revision. This usually means that any patches to support" - ewarn "${m_name} have been forward ported and maybe even compile-tested," - ewarn "but not yet booted on real hardware, possibly due to a lack of access" - ewarn "to such hardware. If you happen to boot this kernel and have no" - ewarn "problems at all, then please inform the maintainer. Otherwise, if" - ewarn "experience a bug, an oops/panic, or some other oddity, then please" - ewarn "file a bug at bugs.gentoo.org, and assign it to the mips team." - fi - - return 0 -} - -err_only_one_mach_allowed() { - echo -e "" - eerror "A patchset for a specific machine-type has already been selected." - eerror "No other patches for machines-types are permitted. You will need a" - eerror "separate copy of the kernel sources for each different machine-type" - eerror "you want to build a kernel for." - die "Only one machine-type patchset allowed" -} - -fkv_to_machtype() { - # For any machines that use external patches, we rename the source - # tree to match the machine type. - local fkv="${F_KV%-*}" - local v="${fkv}" - for x in {ip27,ip28,ip30}; do - use ${x} && v="${v}.${x}" && break - done - - echo "${v}" -} - -pkg_postinst() { - if ! use symlink; then - return 0 - fi - - local kern_sym="/usr/src/linux" - - # Check that /usr/src/linux is safe to overwrite - if [[ -e "${kern_sym}" && ! -L "${kern_sym}" ]]; then - die "${kern_sym} already exists, but is not a symbolic link" - fi - - # Symlink /usr/src/linux as appropriate - local kern_ver=$(fkv_to_machtype) - ln -snf "linux-${kern_ver}" "${kern_sym}" -} - -pkg_setup() { - local arch_is_selected="no" - local m_ip m_enable m_name - - # Exclusive machine patchsets - # These are not allowed to be mixed together, thus only one of them may be applied - # to a tree per merge. - for x in \ - "ip27 SGI Origin 200/2000" \ - "ip28 SGI Indigo2 Impact R10000" \ - "ip30 SGI Octane" - do - set -- ${x} # Set positional params - m_ip="${1}" # Grab the first param (HW IP for SGI) - shift # Shift the positions - m_name="${*}" # Get the rest (Name) - - if ! use ${m_ip}; then - continue - fi - - # Fetch the value indiciating if the machine is enabled or not - m_enable="DO_${m_ip/ip/IP}" - m_enable="${!m_enable}" - - # Make sure only one of these exclusive machine patches is selected - [[ "${arch_is_selected}" = "no" ]] \ - && arch_is_selected="yes" \ - || err_only_one_mach_allowed - - # Is the machine support disabled or marked as needing testing? - case "${m_enable}" in - "test") err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" "test" ;; - "no") err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" ;; - esac - - # Show relevant information about the machine - show_${m_ip}_info - done - - # All other systems that don't have a USE flag go here - # These systems have base-line support included in linux-mips git, so - # instead of failing, if disabled, we simply warn the user - if [[ "${arch_is_selected}" = "no" ]]; then - [[ "${DO_IP22}" = "no" ]] \ - && err_disabled_mach "SGI Indy/Indigo2 R4x00" "IP22" "skip" \ - || show_ip22_info - [[ "${DO_IP32}" = "no" ]] \ - && err_disabled_mach "SGI O2" "IP32" "skip" \ - || show_ip32_info - - fi -} - -show_ip22_info() { - echo -e "" - einfo "IP22 systems with an R5000 processor should work with this release." - einfo "The R4x00 series of processors tend to be rather flaky, especially the" - einfo "R4600. If you have to run an R4x00 processor, then try to use an R4400." - einfo "" - einfo "Some Notes:" - einfo "\t- The only supported graphics card right is Newport (XL)." - einfo "\t- There is no driver for Extreme (XZ)." - echo -e "" -} - -show_ip27_info() { - echo -e "" - ewarn "IP27 Origin 2k/Onyx2 systems may be prone to sudden hard lockups." - ewarn "The exact trigger is unknown at this time." - echo -e "" -} - -show_ip28_info() { - echo -e "" - einfo "Support for the Indigo2 Impact R10000 is now in the mainline kernel. However," - einfo "due to the R10000 Speculative Execution issue that exists with this machine," - einfo "nothing is guaranteed to work correctly. Consider enabling ${HILITE}CONFIG_KALLSYMS${NORMAL}" - einfo "in your kernel so that if the machine Oopes, you'll be able to provide valuable" - einfo "feedback that can be used to trace down the crash." - echo -e "" -} - -show_ip30_info() { - echo -e "" - eerror "Things that DON'T work:" - eerror "\t- Do not use CONFIG_SLUB, otherwise, you'll get errors when booting" - eerror "\t\040\040regarding duplicate /sys/kernel/slab/* entries in sysfs." - eerror "\t- Impact (MGRAS) Xorg driver no longer functions due to severe bitrot." - eerror "\t- Octane is limited to a maximum of 2GB of memory right now due to a" - eerror "\t\040\040hardware quirk in the BRIDGE PCI chip that limits BRIDGE DMA" - eerror "\t\040\040addresses to 31-bits when converted into physical addresses." - echo -e "" - ewarn "Things that might work, but have problems, or are unknown:" - ewarn "\t- Serial support on the Octane uses a very basic UART driver that drives" - ewarn "\t\040\040the 16550A chip on the IOC3 directly. It does not use interrupts," - ewarn "\t\040\040only a polling routine on a timer, which makes it slow and CPU-" - ewarn "\t\040\040intensive. The baud rate is limited to no more than 38.4kbps on" - ewarn "\t\040\040this driver. Patches for getting the Altix IOC3 serial driver to" - ewarn "\t\040\040work (which uses DMA and supports faster baud rates) are welcome." - ewarn "\t- MENET boards appear to have the four ethernet ports detected, however" - ewarn "\t\040\040the six serial ports don't appear to get picked up by the IOC3" - ewarn "\t\040\040UART driver. The NIC part number is also not read correctly" - ewarn "\t\040\040from the four Number-In-a-Cans." - ewarn "\t- Other XIO-based devices, like various Impact addons, remain untested" - ewarn "\t\040\040and are not guaranteed to work." - ewarn "\t- Upon rebooting, Octane may not return to the PROM. Holding down the" - ewarn "\t\040\040reset button for up to ten seconds, releasing, then pressing it" - ewarn "\t\040\040again for one or two seconds may trigger the system to return" - ewarn "\t\040\040to the PROM. Please wait at least five seconds after each attempt" - ewarn "\t\040\040to see if the machine responds. As a last resort, unplugging the" - ewarn "\t\040\040power cord for 30 seconds will also work, but be aware the power" - ewarn "\t\040\040supplies on these systems will not appreciate this due to their" - ewarn "\t\040\040relative old age." - echo -e "" - einfo "Things that DO work:" - einfo "\t- SMP support." - einfo "\t- Impact (MGRAS), console only." - einfo "\t- VPro (Odyssey), console only." - einfo "\t- PCI card cages (showbox) should work for many devices, except certain" - einfo "\t\040\040types such as PCI-to-PCI bridges (USB hubs, USB flash card readers)." - einfo "\t- SCSI, RTC, basic PCI, IOC3 Ethernet, keyboard, and mouse. Please" - einfo "\t\040\040report any problems with these devices." - einfo "\t- SGI AceNIC/Tigon II gigabit cards will work in the PCI card cage/shoebox." - echo -e "" -} - -show_ip32_info() { - echo -e "" - einfo "IP32 systems function well, however there are some notes:" - einfo "\t- A sound driver now exists for IP32." - einfo "\t- Framebuffer console is limited to 4MB. Anything greater" - einfo "\t\040\040specified when building the kernel will oops or" - einfo "\t\040\040panic the kernel." - echo -e "" - eerror "IP32 Systems may be unstable and prone to lockups under a 5.4.x LTS kernel." - eerror "The cause is unknown at this time." - echo -e "" - - einfo "To Build 64bit kernels for SGI O2 (IP32) or SGI Indy/Indigo2 R4x00 (IP22)" - einfo "systems, you need to use the ${GOOD}vmlinux.32${NORMAL} make target." - einfo "Once done, boot the ${GOOD}vmlinux.32${NORMAL} file (NOT vmlinux)." -} - -src_unpack() { - # Unpack the kernel sources, update to the latest rev (if needed), - # and apply the latest patch from linux-mips git. - kernel-2_src_unpack - - # Unpack the mips-sources patchset to ${WORKDIR}/mips-patches-${BASE_KV}. - echo -e "" - cd "${WORKDIR}" - unpack "${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz" - - # Create a new folder called 'patch-symlinks' and create symlinks to - # all mips-patches in there. If we want to exclude a patch, we'll - # just delete the symlink instead of the actual patch. - mkdir patch-symlinks - cd patch-symlinks - for x in ../mips-patches-${BASE_KV}/*.patch; do - ln -s "${x}" "${x##../mips-patches-*/}" - done - - # With symlinks created, setup the variables referencing external - # machine patches and if a machine USE flag is enabled, then unset - # its corresponding variable. - # See 0000_README for the patch numbers and their meanings. - local p_generic="51*" - local p_ip27="52*" p_ip28="53*" p_ip30="54*" - local p_xp="80*" - use ip27 && unset p_generic p_ip27 - use ip28 && unset p_ip28 - use ip30 && unset p_generic p_ip30 - use experimental && unset p_xp - - # Remove symlinks for any patches that we don't want applied. We - # do this by looping through all the above variables, and deleting - # matching symlinks that point to the corresponding patches. - # The remaining symlinks will be applied to the kernel source. - # - # $P_EXCLUDE is a new var that can be set in an ebuild to exclude - # specific patches by wildcarding the patch number. - local patchlist="${p_generic} ${p_ip27} ${p_ip28} ${p_ip30} ${p_xp} ${P_EXCLUDE}" - for x in $patchlist; - do rm -f "./${x}" - done - - # Rename the source tree, if needed. - local old="${WORKDIR}/linux-${F_KV%-*/_/-}" - local new="${WORKDIR}/linux-$(fkv_to_machtype)" - if [[ "${old}" != "${new}" ]]; then - mv "${old}" "${new}" || die - fi - S="${new}" - - # Set the EXTRAVERSION to linux-VERSION-mipsgit-GITDATE - EXTRAVERSION="${EXTRAVERSION}-gentoo-mips" - unpack_set_extraversion -} - -src_prepare() { - # Apply patches to the kernel tree. - eapply "${WORKDIR}/patch-symlinks"/ - - eapply_user -} |