diff options
author | V3n3RiX <venerix@redcorelinux.org> | 2017-10-09 18:53:29 +0100 |
---|---|---|
committer | V3n3RiX <venerix@redcorelinux.org> | 2017-10-09 18:53:29 +0100 |
commit | 4f2d7949f03e1c198bc888f2d05f421d35c57e21 (patch) | |
tree | ba5f07bf3f9d22d82e54a462313f5d244036c768 /sys-boot/raspberrypi-firmware/files |
reinit the tree, so we can have metadata
Diffstat (limited to 'sys-boot/raspberrypi-firmware/files')
3 files changed, 84 insertions, 0 deletions
diff --git a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-cmdline.txt b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-cmdline.txt new file mode 100644 index 000000000000..39112a2dba61 --- /dev/null +++ b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-cmdline.txt @@ -0,0 +1 @@ +ipv6.disable=0 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=noop rootwait diff --git a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-config.txt b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-config.txt new file mode 100644 index 000000000000..9401530925de --- /dev/null +++ b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-config.txt @@ -0,0 +1,81 @@ +#from archlinux arm sdcard image +# uncomment if you get no picture on HDMI for a default "safe" mode +#hdmi_safe=1 + +# uncomment this if your display has a black border of unused pixels visible +# and your display can output without overscan +#disable_overscan=1 + +# uncomment the following to adjust overscan. Use positive numbers if console +# goes off screen, and negative if there is too much border +#overscan_left=16 +#overscan_right=16 +#overscan_top=16 +#overscan_bottom=16 + +# uncomment to force a console size. By default it will be display's size minus +# overscan. +#framebuffer_width=1280 +#framebuffer_height=720 + +# uncomment if hdmi display is not detected and composite is being output +#hdmi_force_hotplug=1 + +# uncomment to force a specific HDMI mode (this will force VGA) +#hdmi_group=1 +#hdmi_mode=1 + +# uncomment to force a HDMI mode rather than DVI. This can make audio work in +# DMT (computer monitor) modes +#hdmi_drive=2 + +# uncomment to increase signal to HDMI, if you have interference, blanking, or +# no display +#config_hdmi_boost=4 + +# uncomment for composite PAL +#sdtv_mode=2 + +#uncomment to overclock the arm. 700 MHz is the default. +#arm_freq=800 + +# for more options see http://elinux.org/RPi_config.txt + +## Some over clocking settings, govenor already set to ondemand + +##None +#arm_freq=700 +#core_freq=250 +#sdram_freq=400 +#over_voltage=0 + +##Modest +#arm_freq=800 +#core_freq=300 +#sdram_freq=400 +#over_voltage=0 + +##Medium +#arm_freq=900 +#core_freq=333 +#sdram_freq=450 +#over_voltage=2 + +##High +#arm_freq=950 +#core_freq=450 +#sdram_freq=450 +#over_voltage=6 + +##Turbo +#arm_freq=1000 +#core_freq=500 +#sdram_freq=500 +#over_voltage=6 + +gpu_mem_512=316 +gpu_mem_256=128 +cma_lwm=16 +cma_hwm=32 +cma_offline_start=16 + diff --git a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-envd b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-envd new file mode 100644 index 000000000000..22ed09320464 --- /dev/null +++ b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-envd @@ -0,0 +1,2 @@ +CONFIG_PROTECT="/boot/config.txt /boot/cmdline.txt" + |