gentoo resync : 29.06.2021

2 files changed, 112 insertions, 0 deletions

diff --git a/net-analyzer/fprobe/files/conf.d-fprobe-r1 b/net-analyzer/fprobe/files/conf.d-fprobe-r1
new file mode 100644
index 000000000000..ca7aff4e4341
--- /dev/null
+++ b/net-analyzer/fprobe/files/conf.d-fprobe-r1
@@ -0,0 +1,72 @@
+# Config file for /etc/init.d/fprobe
+
+# Do we want the interface in promiscous mode [yes/no]
+#PROMISC=no
+
+# Interface
+IFACE=eth0
+
+# required: only capture packets matching this tcpdump expression
+# default is all IP + IPv6
+FILTER="ip or ip6"
+
+# Flow state timers
+#TIMER_EXPIRED=5
+#TIMER_FRAGMENTED=30
+#TIMER_IDLE=60
+#TIMER_ACTIVE=300
+
+# This is the default and should be left unless you know what you are doing
+#FLOW_VER=5
+
+# local ip. if configured fprobe will use this as the source IP for sending ALL flow data
+# If you want to specify a specific source address per collecter, customize it below
+#LOCALIP=
+
+# SNMP iface id
+SNMP_IFACE="${IFACE#eth}"
+
+# Maximum number of concurrent flows to track
+# using a specified amount of memory
+#MEMBULK=10000
+#MEMLIMIT=
+
+# Pending queue
+#PENDING=100
+
+# Kernel capture buffer size (kB)
+#KERNBUF=1024
+
+# Realtime priority [0=disabled, 1..99]
+#RTPRIO=0
+
+# Delay N nanoseconds after each B bytes
+#DELAY="0:0"
+
+# How much of the start of each packet to grab
+#SNAPLEN=256
+
+# chroot() to this location after startup
+CHROOT="/var/empty"
+
+# User to run as. must have perms to the pidfile directory /var/run/fprobe/
+USER=nobody
+
+# logging level for syslog (0=EMERG, ..., 6=INFO, 7=DEBUG)
+#LOGLEVEL=6
+
+# If you want to run multiple instances of fprobe,
+# You MUST set this variable to a unique INTEGER for each one!
+PIDFILE_ID=''
+
+# remote ip. this is where we send flows
+REMOTEIP=127.0.0.1
+# port to listen on
+PORT=2055
+# Collector type, see the manpage for valid types
+TYPE=''
+
+# If you want multiple collectors, just specify each one here
+COLLECTORS="${REMOTEIP}:${PORT}/${LOCALIP}/${TYPE}"
+
+# vim:ft=gentoo-conf-d:
diff --git a/net-analyzer/fprobe/files/init.d-fprobe-r1 b/net-analyzer/fprobe/files/init.d-fprobe-r1
new file mode 100644
index 000000000000..2dc84b8bfbe9
--- /dev/null
+++ b/net-analyzer/fprobe/files/init.d-fprobe-r1
@@ -0,0 +1,40 @@
+#!/sbin/openrc-run
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+depend() {
+	need net
+}
+
+BIN=/usr/sbin/fprobe
+PIDFILE_EXTRA=""
+[ -n "$PIDFILE_ID" ] && PIDFILE_EXTRA="[$PIDFILE_ID]"
+PIDFILE="/var/run/fprobe$PIDFILE_EXTRA.pid"
+
+start() {
+	ebegin "Starting fprobe"
+	local OPTS=""
+	[ "${PROMISC}" = "yes" ] || OPTS="${OPTS} -p"
+	for optname in i:IFACE s:TIMER_EXPIRED g:TIME_FRAGMENTED d:TIMER_IDLE \
+		e:TIMER_ACTIVE n:FLOW_VER a:LOCALIP x:SNMP_IFACE b:MEMBULK \
+		m:MEMLIMIT q:PENDING B:KERNBUF r:RTPRIO t:DELAY S:SNAPLEN \
+		c:CHROOT u:USER v:LOGLEVEL ; do
+	    opt="${optname%:*}"	optvar="${optname#*:}"
+	    eval optvalue='$'$optvar
+	    [ -n "$optvalue" ] && OPTS="${OPTS} -${opt} ${optvalue}"
+	done
+	OPTS="${OPTS} -l 1:${PIDFILE_ID} ${COLLECTORS}"
+	start-stop-daemon --start --exec $BIN \
+		--pidfile ${PIDFILE} \
+		-- -f "${FILTER}" ${OPTS}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping fprobe"
+	start-stop-daemon --stop --quiet --exec $BIN \
+		--pidfile ${PIDFILE}
+	eend $?
+}
+
+# vim:ft=gentoo-init-d: