gentoo resync : 16.06.2019

1 files changed, 0 insertions, 131 deletions

diff --git a/mail-filter/mimedefang/files/mimedefang.conf b/mail-filter/mimedefang/files/mimedefang.conf
deleted file mode 100644
index 49ccef7be077..000000000000
--- a/mail-filter/mimedefang/files/mimedefang.conf
+++ /dev/null
@@ -1,131 +0,0 @@
-# Additional options for MIMEDefang.
-# read man pages mimedefang(8) for additional informations.
-
-# Locale should be set to "C" for generating valid date headers
-LC_ALL=C
-export LC_ALL
-
-# The settings which follow are defaults.  You can override them by
-# placing assignments in /etc/mail/mimedefang.conf
-
-# The socket used by mimedefang to communicate with sendmail
-# SOCKET=$SPOOLDIR/mimedefang.sock
-
-# Run the multiplexor and filters as this user, not root.  RECOMMENDED
-MX_USER=defang
-
-# Syslog facility
-# SYSLOG_FACILITY=mail
-
-# If you want to keep spool directories around if the filter fails,
-# set the next one to yes
-# KEEP_FAILED_DIRECTORIES=no
-
-# "yes" turns on the multiplexor relay checking function
-# MX_RELAY_CHECK=no
-
-# "yes" turns on the multiplexor HELO checking function
-# MX_HELO_CHECK=no
-
-# "yes" turns on the multiplexor sender checking function
-# MX_SENDER_CHECK=no
-
-# "yes" turns on the multiplexor recipient checking function
-# MX_RECIPIENT_CHECK=no
-
-# Set to yes if you want the multiplexor to log events to syslog
-MX_LOG=yes
-
-# Set to yes if you want to use an embedded Perl interpreter
-# MX_EMBED_PERL=yes
-
-# Set to full path of socket for Sendmail's SOCKETMAP map, if you
-# want to use it with MIMEDefang
-# MX_MAP_SOCKET=$SPOOLDIR/map.sock
-
-# The multiplexor does not start all slaves at the same time.  Instead,
-# it starts one slave every MX_SLAVE_DELAY seconds when the system is idle.
-# (If the system is busy, the multiplexor starts slaves as incoming mail
-# requires attention.)
-# MX_SLAVE_DELAY=3
-
-# The next setting is an absolute limit on slave activation.  The multiplexor
-# will NEVER activate a slave within MX_MIN_SLAVE_DELAY seconds of another.
-# The default of zero means that the multiplexor will activate slaves as
-# quickly as necessary to keep up with incoming mail.
-# MX_MIN_SLAVE_DELAY=0
-
-# Set to yes if you want the multiplexor to log stats in
-# /var/log/mimedefang/stats  The /var/log/mimedefang directory must
-# exist and be writable by the user you're running MIMEDefang as.
-# MX_STATS=no
-
-# Number of slaves reserved for connections from loopback.  Use -1
-# for default behaviour, 0 to allow loopback connections to queue,
-# or >0 to reserve slaves for loopback connections
-LOOPBACK_RESERVED_CONNECTIONS=-1
-
-# Set to yes if you want the stats file flushed after each entry
-# MX_FLUSH_STATS=no
-
-# Set to yes if you want the multiplexor to log stats to syslog
-# MX_STATS_SYSLOG=no
-
-# The socket used by the multiplexor
-# MX_SOCKET=$SPOOLDIR/mimedefang-multiplexor.sock
-
-# Maximum # of requests a process handles
-# MX_REQUESTS=200
-
-# Minimum number of processes to keep.  The default of 0 is probably
-# too low; we suggest 2 instead.
-MX_MINIMUM=2
-
-# Maximum number of processes to run (mail received while this many
-# processes are running is rejected with a temporary failure, so be
-# wary of how many emails you receive at a time).  This applies only
-# if you DO use the multiplexor.  The default value of 2 is probably
-# too low; we suggest 10 instead
-MX_MAXIMUM=10
-
-# Uncomment to log slave status; it will be logged every
-# MX_LOG_SLAVE_STATUS_INTERVAL seconds
-# MX_LOG_SLAVE_STATUS_INTERVAL=30
-
-# Uncomment next line to have busy slaves send status updates to the
-# multiplexor.  NOTE: Consumes one extra file descriptor per slave, plus
-# a bit of CPU time.
-# MX_STATUS_UPDATES=yes
-
-# Limit slave processes' resident-set size to this many kilobytes.  Default
-# is unlimited.
-# MX_MAX_RSS=10000
-
-# Limit total size of slave processes' memory space to this many kilobytes.
-# Default is unlimited.
-# MX_MAX_AS=30000
-
-# If you want to use the "notification" facility, set the appropriate port.
-# See the mimedefang-notify man page for details.
-# MX_NOTIFIER=inet:4567
-
-# Number of seconds a process should be idle before checking for
-# minimum number and killed
-# MX_IDLE=300
-
-# Number of seconds a process is allowed to scan an email before it is
-# considered dead.  The default is 30 seconds; we suggest 600.
-MX_BUSY=600
-
-# Extra sendmail macros to pass.  Actually, you can add any extra
-# mimedefang options here...
-# MD_EXTRA="-a auth_author"
-
-# Multiplexor queue size -- default is 0 (no queueing)
-# MX_QUEUE_SIZE=10
-
-# Multiplexor queue timeout -- default is 30 seconds
-# MX_QUEUE_TIMEOUT=30
-
-# SUBFILTER specifies which filter rules file to use
-# SUBFILTER=/etc/mail/mimedefang-filter