diff options
author | V3n3RiX <venerix@redcorelinux.org> | 2018-07-14 20:12:15 +0100 |
---|---|---|
committer | V3n3RiX <venerix@redcorelinux.org> | 2018-07-14 20:12:15 +0100 |
commit | 3f7826d8856457be233edea5999a25e374f54625 (patch) | |
tree | 7b49d251a79cf55d5e29ceb9af99308b5f037628 /backup/amanda/amanda-3.4.5.ebuild | |
parent | 6deea6f9112b20068bdb8e82f049e28508efac83 (diff) |
gentoo resync : 14.07.2018
Diffstat (limited to 'backup/amanda/amanda-3.4.5.ebuild')
-rw-r--r-- | backup/amanda/amanda-3.4.5.ebuild | 484 |
1 files changed, 484 insertions, 0 deletions
diff --git a/backup/amanda/amanda-3.4.5.ebuild b/backup/amanda/amanda-3.4.5.ebuild new file mode 100644 index 000000000000..aec64fedec3e --- /dev/null +++ b/backup/amanda/amanda-3.4.5.ebuild @@ -0,0 +1,484 @@ +# Copyright 1999-2017 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +EAPI=6 +inherit autotools perl-module user systemd + +DESCRIPTION="The Advanced Maryland Automatic Network Disk Archiver" +HOMEPAGE="http://www.amanda.org/" +SRC_URI="mirror://sourceforge/amanda/${P}.tar.gz" + +LICENSE="HPND BSD BSD-2 GPL-2+ GPL-3+" +SLOT="0" +IUSE="curl gnuplot ipv6 kerberos minimal nls readline s3 samba systemd xfs" + +KEYWORDS="~amd64 ~ppc ~ppc64 ~sparc ~x86" +RDEPEND="sys-libs/readline:= + virtual/awk + app-arch/tar + dev-lang/perl:= + app-arch/dump + net-misc/openssh + >=dev-libs/glib-2.26.0 + dev-perl/JSON + dev-perl/Encode-Locale + nls? ( virtual/libintl ) + s3? ( >=net-misc/curl-7.10.0 ) + !s3? ( curl? ( >=net-misc/curl-7.10.0 ) ) + samba? ( net-fs/samba:= ) + kerberos? ( app-crypt/mit-krb5 ) + xfs? ( sys-fs/xfsdump ) + !minimal? ( + dev-perl/XML-Simple + virtual/mailx + app-arch/mt-st:= + sys-block/mtx + gnuplot? ( sci-visualization/gnuplot ) + app-crypt/aespipe + app-crypt/gnupg + )" + +DEPEND="${RDEPEND} + virtual/pkgconfig + nls? ( sys-devel/gettext ) + >=app-text/docbook-xsl-stylesheets-1.72.0 + app-text/docbook-xml-dtd + dev-libs/libxslt + dev-lang/swig + " + +MYFILESDIR="${T}/files" +ENVDIR="/etc/env.d" +ENVDFILE="97amanda" +TMPENVFILE="${T}/${ENVDFILE}" + +# This is a complete list of Amanda settings that the ebuild takes from the +# build environment. This allows users to alter the behavior of the package as +# upstream intended, but keeping with Gentoo style. We store a copy of them in +# /etc/env.d/97amanda during the install, so that they are preserved for future +# installed. This variable name must not start with AMANDA_, as we do not want +# it captured into the env file. +ENV_SETTINGS_AMANDA=" +AMANDA_GROUP_GID AMANDA_GROUP_NAME +AMANDA_USER_NAME AMANDA_USER_UID AMANDA_USER_SH AMANDA_USER_HOMEDIR AMANDA_USER_GROUPS +AMANDA_SERVER AMANDA_SERVER_TAPE AMANDA_SERVER_TAPE_DEVICE AMANDA_SERVER_INDEX +AMANDA_TAR_LISTDIR AMANDA_TAR +AMANDA_PORTS_UDP AMANDA_PORTS_TCP AMANDA_PORTS_BOTH AMANDA_PORTS +AMANDA_CONFIG_NAME AMANDA_TMPDIR" + +amanda_variable_setup() { + + # Setting vars + local currentamanda + + # Grab the current settings + currentamanda="$(set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' | xargs)" + + # First we set the defaults + [[ -z "${AMANDA_GROUP_GID}" ]] && AMANDA_GROUP_GID=87 + [[ -z "${AMANDA_GROUP_NAME}" ]] && AMANDA_GROUP_NAME=amanda + [[ -z "${AMANDA_USER_NAME}" ]] && AMANDA_USER_NAME=amanda + [[ -z "${AMANDA_USER_UID}" ]] && AMANDA_USER_UID=87 + [[ -z "${AMANDA_USER_SH}" ]] && AMANDA_USER_SH=/bin/bash + [[ -z "${AMANDA_USER_HOMEDIR}" ]] && AMANDA_USER_HOMEDIR=/var/spool/amanda + [[ -z "${AMANDA_USER_GROUPS}" ]] && AMANDA_USER_GROUPS="${AMANDA_GROUP_NAME}" + + # This installs Amanda, with the server. However, it could be a client, + # just specify an alternate server name in AMANDA_SERVER. + [[ -z "${AMANDA_SERVER}" ]] && AMANDA_SERVER="${HOSTNAME}" + [[ -z "${AMANDA_SERVER_TAPE}" ]] && AMANDA_SERVER_TAPE="${AMANDA_SERVER}" + [[ -z "${AMANDA_SERVER_TAPE_DEVICE}" ]] && AMANDA_SERVER_TAPE_DEVICE="/dev/nst0" + [[ -z "${AMANDA_SERVER_INDEX}" ]] && AMANDA_SERVER_INDEX="${AMANDA_SERVER}" + [[ -z "${AMANDA_TAR_LISTDIR}" ]] && AMANDA_TAR_LISTDIR=${AMANDA_USER_HOMEDIR}/tar-lists + [[ -z "${AMANDA_CONFIG_NAME}" ]] && AMANDA_CONFIG_NAME=DailySet1 + [[ -z "${AMANDA_TMPDIR}" ]] && AMANDA_TMPDIR=/var/tmp/amanda + [[ -z "${AMANDA_DBGDIR}" ]] && AMANDA_DBGDIR="$AMANDA_TMPDIR" + # These are left empty by default + [[ -z "${AMANDA_PORTS_UDP}" ]] && AMANDA_PORTS_UDP= + [[ -z "${AMANDA_PORTS_TCP}" ]] && AMANDA_PORTS_TCP= + [[ -z "${AMANDA_PORTS_BOTH}" ]] && AMANDA_PORTS_BOTH= + [[ -z "${AMANDA_PORTS}" ]] && AMANDA_PORTS= + + # What tar to use + [[ -z "${AMANDA_TAR}" ]] && AMANDA_TAR=/bin/tar + + # Now pull in the old stuff + if [[ -f "${EROOT}${ENVDIR}/${ENVDFILE}" ]]; then + # We don't just source it as we don't want everything in there. + eval $(egrep "^AMANDA_" "${EROOT}${ENVDIR}/${ENVDFILE}" | grep -v '^AMANDA_ENV_SETTINGS') + fi + + # Re-apply the new settings if any + [ -n "${currentamanda}" ] && eval $(echo "${currentamanda}") + +} + +pkg_setup() { + amanda_variable_setup + + # If USE=minimal, give out a warning, if AMANDA_SERVER is not set to + # another host than HOSTNAME. + if use minimal && [ "${AMANDA_SERVER}" = "${HOSTNAME}" ] ; then + elog "You are installing a client-only version of Amanda." + elog "You should set the variable \$AMANDA_SERVER to point at your" + elog "Amanda-tape-server, otherwise you will have to specify its name" + elog "when using amrecover on the client." + elog "For example: Use something like" + elog "AMANDA_SERVER=\"myserver\" emerge amanda" + elog + fi + + enewgroup "${AMANDA_GROUP_NAME}" "${AMANDA_GROUP_GID}" + enewuser "${AMANDA_USER_NAME}" "${AMANDA_USER_UID}" "${AMANDA_USER_SH}" "${AMANDA_USER_HOMEDIR}" "${AMANDA_USER_GROUPS}" +} + +src_unpack() { + # we do not want the perl src_unpack + default_src_unpack +} + +src_prepare() { + # gentoo bug #331111 + sed -i '/^check-local: check-perl$/d' "${S}"/config/automake/scripts.am || die + sed -i '/^check-local:/s,syntax-check,,g' "${S}"/perl/Makefile.am || die + + # bug with glibc-2.16.0 + sed -i -e '/gets is a security/d' "${S}"/gnulib/stdio.in.h || die + + eautoreconf + + # places for us to work in + mkdir -p "${MYFILESDIR}" || die + # Now we store the settings we just created + set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' > "${TMPENVFILE}" || die + + # Prepare our custom files + einfo "Building custom configuration files" + local i # our iterator + local sedexpr # var for sed expr + sedexpr='' + for i in ${ENV_SETTINGS_AMANDA} ; do + local val + eval "val=\"\${${i}}\"" + sedexpr="${sedexpr}s|__${i}__|${val}|g;" + done + + # now apply the sed expr + for i in "${FILESDIR}"/amanda-* ; do + sed -re "${sedexpr}" <"${i}" >"${MYFILESDIR}/`basename ${i}`" || die + done + + if use minimal; then + cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1 > "${T}"/amandahosts || die + else + sed -i -e 's:^\(my $amandahomedir\)=.*:\1 = $localstatedir;:' \ + server-src/am{addclient,serverconfig}.pl || die + cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1 > "${T}"/amandahosts || die + fi + + eapply_user +} + +src_configure() { + # fix bug #36316 + addpredict /var/cache/samba/gencache.tdb + # fix bug #376169 + addpredict /run/blkid + addpredict /etc/blkid.tab + + [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" + source "${TMPENVFILE}" + local myconf + + einfo "Using ${AMANDA_SERVER_TAPE} for tape server." + myconf="${myconf} --with-tape-server=${AMANDA_SERVER_TAPE}" + einfo "Using ${AMANDA_SERVER_TAPE_DEVICE} for tape server." + myconf="${myconf} --with-tape-device=${AMANDA_SERVER_TAPE_DEVICE}" + einfo "Using ${AMANDA_SERVER_INDEX} for index server." + myconf="${myconf} --with-index-server=${AMANDA_SERVER_INDEX}" + einfo "Using ${AMANDA_USER_NAME} for amanda user." + myconf="${myconf} --with-user=${AMANDA_USER_NAME}" + einfo "Using ${AMANDA_GROUP_NAME} for amanda group." + myconf="${myconf} --with-group=${AMANDA_GROUP_NAME}" + einfo "Using ${AMANDA_TAR} as Tar implementation." + myconf="${myconf} --with-gnutar=${AMANDA_TAR}" + einfo "Using ${AMANDA_TAR_LISTDIR} as tar listdir." + myconf="${myconf} --with-gnutar-listdir=${AMANDA_TAR_LISTDIR}" + einfo "Using ${AMANDA_CONFIG_NAME} as default config name." + myconf="${myconf} --with-config=${AMANDA_CONFIG_NAME}" + einfo "Using ${AMANDA_TMPDIR} as Amanda temporary directory." + myconf="${myconf} --with-tmpdir=${AMANDA_TMPDIR}" + + if [ -n "${AMANDA_PORTS_UDP}" ] && [ -n "${AMANDA_PORTS_TCP}" ] && [ -z "${AMANDA_PORTS_BOTH}" ] ; then + eerror "If you want _both_ UDP and TCP ports, please use only the" + eerror "AMANDA_PORTS environment variable for identical ports, or set" + eerror "AMANDA_PORTS_BOTH." + die "Bad port setup!" + fi + if [ -n "${AMANDA_PORTS_UDP}" ]; then + einfo "Using UDP ports ${AMANDA_PORTS_UDP/,/-}" + myconf="${myconf} --with-udpportrange=${AMANDA_PORTS_UDP}" + fi + if [ -n "${AMANDA_PORTS_TCP}" ]; then + einfo "Using TCP ports ${AMANDA_PORTS_TCP/,/-}" + myconf="${myconf} --with-tcpportrange=${AMANDA_PORTS_TCP}" + fi + if [ -n "${AMANDA_PORTS}" ]; then + einfo "Using ports ${AMANDA_PORTS/,/-}" + myconf="${myconf} --with-portrange=${AMANDA_PORTS}" + fi + + # Extras + # Speed option + myconf="${myconf} --with-buffered-dump" + # "debugging" in the configuration is NOT debug in the conventional sense. + # It is actually just useful output in the application, and should remain + # enabled. There are some cases of breakage with MTX tape changers as of + # 2.5.1p2 that it exposes when turned off as well. + myconf="${myconf} --with-debugging" + # Where to put our files + myconf="${myconf} --localstatedir=${AMANDA_USER_HOMEDIR}" + + # Samba support + myconf="${myconf} $(use_with samba smbclient /usr/bin/smbclient)" + + # Support for BSD, SSH, BSDUDP, BSDTCP security methods all compiled in by + # default + myconf="${myconf} --with-bsd-security" + myconf="${myconf} --with-ssh-security" + myconf="${myconf} --with-bsdudp-security" + myconf="${myconf} --with-bsdtcp-security" + + # kerberos-security mechanism version 5 + myconf="${myconf} $(use_with kerberos krb5-security)" + + # Amazon S3 support + myconf="${myconf} `use_enable s3 s3-device`" + + # libcurl is required for S3 but otherwise optional + if ! use s3; then + myconf="${myconf} $(use_with curl libcurl)" + fi + + # Client only, as requested in bug #127725 + if use minimal ; then + myconf="${myconf} --without-server" + else + # amplot + myconf="${myconf} $(use_with gnuplot)" + fi + + # IPv6 fun. + myconf="${myconf} `use_with ipv6`" + # This is to prevent the IPv6-is-working test + # As the test fails on binpkg build hosts with no IPv6. + use ipv6 && export amanda_cv_working_ipv6=yes + + # I18N + myconf="${myconf} `use_enable nls`" + + # Bug #296634: Perl location + perl_set_version + myconf="${myconf} --with-amperldir=${VENDOR_LIB}" + + # Bug 296633: --disable-syntax-checks + # Some tests are not safe for production systems + myconf="${myconf} --disable-syntax-checks" + + # build manpages + myconf="${myconf} --enable-manpage-build" + + # bug #483120 + tc-export AR + + econf \ + $(use_with readline) \ + ${myconf} +} + +src_compile() { + # Again, do not want the perl-module src_compile + default_src_compile +} + +src_install() { + [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" + source ${TMPENVFILE} + + einfo "Doing stock install" + emake DESTDIR="${D}" install || die + + # Build the envdir file + # Don't forget this.. + einfo "Building environment file" + ( + echo "# These settings are what was present in the environment when this" + echo "# Amanda was compiled. Changing anything below this comment will" + echo "# have no effect on your application, but it merely exists to" + echo "# preserve them for your next emerge of Amanda" + cat "${TMPENVFILE}" | sed "s,=\$,='',g" + ) >> "${MYFILESDIR}/${ENVDFILE}" + + # Env.d + einfo "Installing environment config file" + doenvd "${MYFILESDIR}/${ENVDFILE}" + + # Lock down next section (up until docs). + insopts -m0640 + # Installing Amanda Xinetd Services Definition + einfo "Installing xinetd service file" + insinto /etc/xinetd.d + if use minimal ; then + newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-client amanda + else + newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-server amanda + fi + + if ! use minimal; then + einfo "Installing Sample Daily Cron Job for Amanda" + insinto /etc/cron.daily + newins "${MYFILESDIR}/amanda-cron" amanda + fi + + einfo "Installing systemd service and socket files for Amanda" + systemd_dounit "${FILESDIR}"/amanda.socket || die + systemd_newunit "${FILESDIR}"/amanda.service 'amanda@.service' || die + + insinto /etc/amanda + einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user" + doins "${T}/amandahosts" + fperms 600 /etc/amanda/amandahosts + + dosym /etc/amanda/amandahosts "${AMANDA_USER_HOMEDIR}/.amandahosts" + insinto "${AMANDA_USER_HOMEDIR}" + einfo "Installing .profile for ${AMANDA_USER_NAME} user" + newins "${MYFILESDIR}/amanda-profile" .profile + + insinto /etc/amanda + doins "${S}/example/amanda-client.conf" + if ! use minimal ; then + insinto "/etc/amanda/${AMANDA_CONFIG_NAME}" + doins "${S}/example/amanda.conf" + doins "${S}/example/disklist" + keepdir "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}/index" + fi + + keepdir "${AMANDA_TAR_LISTDIR}" + keepdir "${AMANDA_USER_HOMEDIR}/amanda" + keepdir "${AMANDA_TMPDIR}/dumps" + # Just make sure it exists for XFS to work... + use xfs && keepdir /var/xfsdump/inventory + + local i + for i in "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \ + "${AMANDA_TMPDIR}" /etc/amanda; do + einfo "Securing directory (${i})" + fowners -R ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} ${i} + done + # Do NOT use -R + fperms 0700 \ + "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \ + "${AMANDA_TMPDIR}" "${AMANDA_TMPDIR}/dumps" \ + "${AMANDA_USER_HOMEDIR}/amanda" \ + /etc/amanda + + if ! use minimal ; then + fperms 0700 \ + "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}" \ + /etc/amanda/${AMANDA_CONFIG_NAME} + fi + + einfo "Setting setuid permissions" + amanda_permissions_fix "${D}" + + # Relax permissions again + insopts -m0644 + + # docs + einfo "Installing documentation" + dodoc AUTHORS ChangeLog DEVELOPING NEWS README ReleaseNotes UPGRADING + # our inetd sample + einfo "Installing standard inetd sample" + newdoc "${MYFILESDIR}/amanda-inetd.amanda.sample-2.6.0_p2-r2" amanda-inetd.amanda.sample + # Amanda example configs + einfo "Installing example configurations" + rm "${D}"/usr/share/amanda/{COPYRIGHT,ChangeLog,NEWS,ReleaseNotes} + mv "${D}/usr/share/amanda/example" "${D}/usr/share/doc/${PF}/" + docinto example1 + newdoc "${FILESDIR}/example_amanda.conf" amanda.conf + newdoc "${FILESDIR}/example_disklist-2.5.1_p3-r1" disklist + newdoc "${FILESDIR}/example_global.conf" global.conf + + einfo "Cleaning up dud .la files" + perl_set_version + find "${D}"/"${VENDOR_LIB}" -name '*.la' -print0 |xargs -0 rm -f +} + +pkg_postinst() { + [ ! -f "${TMPENVFILE}" -a "$MERGE_TYPE" == "binary" ] && \ + TMPENVFILE="${ROOT}${ENVDIR}/${ENVDFILE}" + [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" + source "${TMPENVFILE}" + + # Migration of amandates from /etc to $localstatedir/amanda + if [ -f "${ROOT}/etc/amandates" -a \ + ! -f "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" ]; then + einfo "Migrating amandates from /etc/ to ${AMANDA_USER_HOMEDIR}/amanda" + einfo "A backup is also placed at /etc/amandates.orig" + cp -dp "${ROOT}/etc/amandates" "${ROOT}/etc/amandates.orig" + mkdir -p "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/" + cp -dp "${ROOT}/etc/amandates" "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" + fi + if [ -f "${ROOT}/etc/amandates" ]; then + einfo "If you have migrated safely, please delete /etc/amandates" + fi + + einfo "Checking setuid permissions" + amanda_permissions_fix "${ROOT}" + + elog "You should configure Amanda in /etc/amanda now." + elog + elog "If you use xinetd, Don't forget to check /etc/xinetd.d/amanda" + elog "and restart xinetd afterwards!" + elog + elog "Otherwise, please look at /usr/share/doc/${PF}/inetd.amanda.sample" + elog "as an example of how to configure your inetd." + elog + elog "systemd-users: enable and start amanda.socket or the relevant services" + elog "regarding what auth method you use." + elog + elog "NOTICE: If you need raw access to partitions you need to add the" + elog "amanda user to the 'disk' group." + elog + elog "NOTICE: If you have a tape changer, you need to add the amanda user" + elog "to the 'tape' group." + elog + elog "If you use localhost in your disklist your restores may break." + elog "You should replace it with the actual hostname!" + elog "Please also see the syntax changes to amandahosts." + elog "The only exception is when you use the authentication method 'local'." + elog + elog "Please note that this package no longer explicitly depends on" + elog "virtual/inetd, as it supports modes where an inetd is not needed" + elog "(see bug #506028 for details)." +} + +# We have had reports of amanda file permissions getting screwed up. +# Losing setuid, becoming too lax etc. +# ONLY root and users in the amanda group should be able to run these binaries! +amanda_permissions_fix() { + local root="$1" + [ -z "${root}" ] && die "Failed to pass root argument to amanda_permissions_fix!" + local le="/usr/libexec/amanda" + for i in /usr/sbin/amcheck "${le}"/calcsize "${le}"/killpgrp \ + "${le}"/rundump "${le}"/runtar "${le}"/dumper \ + "${le}"/planner ; do + chown root:${AMANDA_GROUP_NAME} "${root}"/${i} + chmod u=srwx,g=rx,o= "${root}"/${i} + done +} + +# We do not want the perl-module tests. +src_test() { + default_src_test +} |