summaryrefslogtreecommitdiff
path: root/sys-kernel/linux-sources-redcore/files
diff options
context:
space:
mode:
Diffstat (limited to 'sys-kernel/linux-sources-redcore/files')
-rw-r--r--sys-kernel/linux-sources-redcore/files/0001-Revert-x86-ACPI-cstate-Allow-ACPI-C1-FFH-MWAIT-use-o.patch29
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-0001-MultiQueue-Skiplist-Scheduler-version-0.192-linux-hardened.patch10577
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-0002-Fix-Werror-build-failure-in-tools.patch25
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-0003-Make-preemptible-kernel-default.patch4653
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-0004-Expose-vmsplit-for-our-poor-32-bit-users.patch48
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-0005-Create-highres-timeout-variants-of-schedule_timeout-.patch153
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-0006-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch49
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-0007-Convert-msleep-to-use-hrtimers-when-active.patch54
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-0008-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch995
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-0009-Replace-all-calls-to-schedule_timeout_interruptible-.patch311
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-0010-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch160
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-0011-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch69
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-0012-Make-threaded-IRQs-optionally-the-default-which-can-.patch67
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-0013-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch81
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-0014-Swap-sucks.patch25
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-Unknow-SSD-HFM128GDHTNG-8310B-QUIRK_NO_APST.patch19
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-acpi-use-kern_warning_even_when_error.patch18
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-amd64.config (renamed from sys-kernel/linux-sources-redcore/files/redcore-amd64.config)2039
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-ata-fix-NCQ-LOG-strings-and-move-to-debug.patch (renamed from sys-kernel/linux-sources-redcore/files/ata-fix-NCQ-LOG-strings-and-move-to-debug.patch)0
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-drop_ancient-and-wrong-msg.patch (renamed from sys-kernel/linux-sources-redcore/files/drop_ancient-and-wrong-msg.patch)0
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-enable_alx_wol.patch (renamed from sys-kernel/linux-sources-redcore/files/enable_alx_wol.patch)0
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-fix-acpi_dbg_level.patch12
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-linux-hardened.patch (renamed from sys-kernel/linux-sources-redcore/files/linux-hardened.patch)791
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-mute-pps_state_mismatch.patch (renamed from sys-kernel/linux-sources-redcore/files/mute-pps_state_mismatch.patch)0
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-radeon_dp_aux_transfer_native-no-ratelimited_debug.patch (renamed from sys-kernel/linux-sources-redcore/files/radeon_dp_aux_transfer_native-no-ratelimited_debug.patch)0
-rw-r--r--sys-kernel/linux-sources-redcore/files/5.1-uksm-linux-hardened.patch (renamed from sys-kernel/linux-sources-redcore/files/uksm-for-linux-hardened.patch)272
-rw-r--r--sys-kernel/linux-sources-redcore/files/nouveau-pascal-backlight.patch11
-rw-r--r--sys-kernel/linux-sources-redcore/files/revert-patches-causing-instant-reboot.patch314
-rw-r--r--sys-kernel/linux-sources-redcore/files/workaround-BIOS-bugs-on-CCP-SVE-ryzen-TR.patch85
29 files changed, 19000 insertions, 1857 deletions
diff --git a/sys-kernel/linux-sources-redcore/files/0001-Revert-x86-ACPI-cstate-Allow-ACPI-C1-FFH-MWAIT-use-o.patch b/sys-kernel/linux-sources-redcore/files/0001-Revert-x86-ACPI-cstate-Allow-ACPI-C1-FFH-MWAIT-use-o.patch
deleted file mode 100644
index e8f3bfda..00000000
--- a/sys-kernel/linux-sources-redcore/files/0001-Revert-x86-ACPI-cstate-Allow-ACPI-C1-FFH-MWAIT-use-o.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From f912ead404ffa24db7f4aee527aff411db39262a Mon Sep 17 00:00:00 2001
-From: Gabriel Craciunescu <crazy@frugalware.org>
-Date: Wed, 11 Apr 2018 17:17:06 +0200
-Subject: [PATCH] Revert "x86/ACPI/cstate: Allow ACPI C1 FFH MWAIT use on AMD systems"
-
-This reverts commit 5209654a46ee71137ad9b06da99d4ef2794475af.
-Please see: https://community.amd.com/thread/224000
-
----
- arch/x86/kernel/acpi/cstate.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
-diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
-index dde437f5d14f..8233a630280f 100644
---- a/arch/x86/kernel/acpi/cstate.c
-+++ b/arch/x86/kernel/acpi/cstate.c
-@@ -167,8 +167,7 @@ static int __init ffh_cstate_init(void)
- {
- struct cpuinfo_x86 *c = &boot_cpu_data;
-
-- if (c->x86_vendor != X86_VENDOR_INTEL &&
-- c->x86_vendor != X86_VENDOR_AMD)
-+ if (c->x86_vendor != X86_VENDOR_INTEL)
- return -1;
-
- cpu_cstate_entry = alloc_percpu(struct cstate_entry);
---
-2.17.0
-
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-0001-MultiQueue-Skiplist-Scheduler-version-0.192-linux-hardened.patch b/sys-kernel/linux-sources-redcore/files/5.1-0001-MultiQueue-Skiplist-Scheduler-version-0.192-linux-hardened.patch
new file mode 100644
index 00000000..392477d4
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-0001-MultiQueue-Skiplist-Scheduler-version-0.192-linux-hardened.patch
@@ -0,0 +1,10577 @@
+diff -Nur a/arch/alpha/Kconfig b/arch/alpha/Kconfig
+--- a/arch/alpha/Kconfig 2019-06-25 04:34:56.000000000 +0100
++++ b/arch/alpha/Kconfig 2019-07-07 09:17:41.251241479 +0100
+@@ -670,6 +670,8 @@
+ default 1200 if HZ_1200
+ default 1024
+
++source "kernel/Kconfig.MuQSS"
++
+ config SRM_ENV
+ tristate "SRM environment through procfs"
+ depends on PROC_FS
+diff -Nur a/arch/arm/Kconfig b/arch/arm/Kconfig
+--- a/arch/arm/Kconfig 2019-06-25 04:34:56.000000000 +0100
++++ b/arch/arm/Kconfig 2019-07-07 09:17:41.251241479 +0100
+@@ -1308,6 +1308,8 @@
+ MultiThreading at a cost of slightly increased overhead in some
+ places. If unsure say N here.
+
++source "kernel/Kconfig.MuQSS"
++
+ config HAVE_ARM_SCU
+ bool
+ help
+diff -Nur a/arch/arm64/Kconfig b/arch/arm64/Kconfig
+--- a/arch/arm64/Kconfig 2019-07-07 09:08:19.122347611 +0100
++++ b/arch/arm64/Kconfig 2019-07-07 09:17:41.251241479 +0100
+@@ -825,6 +825,8 @@
+ MultiThreading at a cost of slightly increased overhead in some
+ places. If unsure say N here.
+
++source "kernel/Kconfig.MuQSS"
++
+ config NR_CPUS
+ int "Maximum number of CPUs (2-4096)"
+ range 2 4096
+diff -Nur a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
+--- a/arch/powerpc/Kconfig 2019-06-25 04:34:56.000000000 +0100
++++ b/arch/powerpc/Kconfig 2019-07-07 09:17:41.251241479 +0100
+@@ -820,6 +820,8 @@
+ when dealing with POWER5 cpus at a cost of slightly increased
+ overhead in some places. If unsure say N here.
+
++source "kernel/Kconfig.MuQSS"
++
+ config PPC_DENORMALISATION
+ bool "PowerPC denormalisation exception handling"
+ depends on PPC_BOOK3S_64
+diff -Nur a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
+--- a/arch/powerpc/platforms/cell/spufs/sched.c 2019-06-25 04:34:56.000000000 +0100
++++ b/arch/powerpc/platforms/cell/spufs/sched.c 2019-07-07 09:17:41.251241479 +0100
+@@ -65,11 +65,6 @@
+ static struct timer_list spuloadavg_timer;
+
+ /*
+- * Priority of a normal, non-rt, non-niced'd process (aka nice level 0).
+- */
+-#define NORMAL_PRIO 120
+-
+-/*
+ * Frequency of the spu scheduler tick. By default we do one SPU scheduler
+ * tick for every 10 CPU scheduler ticks.
+ */
+diff -Nur a/arch/x86/Kconfig b/arch/x86/Kconfig
+--- a/arch/x86/Kconfig 2019-07-07 09:08:19.122347611 +0100
++++ b/arch/x86/Kconfig 2019-07-07 09:17:41.251241479 +0100
+@@ -1017,6 +1017,22 @@
+ config SCHED_SMT
+ def_bool y if SMP
+
++config SMT_NICE
++ bool "SMT (Hyperthreading) aware nice priority and policy support"
++ depends on SCHED_MUQSS && SCHED_SMT
++ default y
++ ---help---
++ Enabling Hyperthreading on Intel CPUs decreases the effectiveness
++ of the use of 'nice' levels and different scheduling policies
++ (e.g. realtime) due to sharing of CPU power between hyperthreads.
++ SMT nice support makes each logical CPU aware of what is running on
++ its hyperthread siblings, maintaining appropriate distribution of
++ CPU according to nice levels and scheduling policies at the expense
++ of slightly increased overhead.
++
++ If unsure say Y here.
++
++
+ config SCHED_MC
+ def_bool y
+ prompt "Multi-core scheduler support"
+@@ -1047,6 +1063,8 @@
+
+ If unsure say Y here.
+
++source "kernel/Kconfig.MuQSS"
++
+ config UP_LATE_INIT
+ def_bool y
+ depends on !SMP && X86_LOCAL_APIC
+diff -Nur a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
+--- a/Documentation/admin-guide/kernel-parameters.txt 2019-07-07 09:08:19.122347611 +0100
++++ b/Documentation/admin-guide/kernel-parameters.txt 2019-07-07 09:17:41.241241144 +0100
+@@ -4149,6 +4149,14 @@
+ Memory area to be used by remote processor image,
+ managed by CMA.
+
++ rqshare= [X86] Select the MuQSS scheduler runqueue sharing type.
++ Format: <string>
++ smt -- Share SMT (hyperthread) sibling runqueues
++ mc -- Share MC (multicore) sibling runqueues
++ smp -- Share SMP runqueues
++ none -- So not share any runqueues
++ Default value is mc
++
+ rw [KNL] Mount root device read-write on boot
+
+ S [KNL] Run init in single mode
+diff -Nur a/Documentation/scheduler/sched-BFS.txt b/Documentation/scheduler/sched-BFS.txt
+--- a/Documentation/scheduler/sched-BFS.txt 1970-01-01 01:00:00.000000000 +0100
++++ b/Documentation/scheduler/sched-BFS.txt 2019-07-07 09:17:41.241241144 +0100
+@@ -0,0 +1,351 @@
++BFS - The Brain Fuck Scheduler by Con Kolivas.
++
++Goals.
++
++The goal of the Brain Fuck Scheduler, referred to as BFS from here on, is to
++completely do away with the complex designs of the past for the cpu process
++scheduler and instead implement one that is very simple in basic design.
++The main focus of BFS is to achieve excellent desktop interactivity and
++responsiveness without heuristics and tuning knobs that are difficult to
++understand, impossible to model and predict the effect of, and when tuned to
++one workload cause massive detriment to another.
++
++
++Design summary.
++
++BFS is best described as a single runqueue, O(n) lookup, earliest effective
++virtual deadline first design, loosely based on EEVDF (earliest eligible virtual
++deadline first) and my previous Staircase Deadline scheduler. Each component
++shall be described in order to understand the significance of, and reasoning for
++it. The codebase when the first stable version was released was approximately
++9000 lines less code than the existing mainline linux kernel scheduler (in
++2.6.31). This does not even take into account the removal of documentation and
++the cgroups code that is not used.
++
++Design reasoning.
++
++The single runqueue refers to the queued but not running processes for the
++entire system, regardless of the number of CPUs. The reason for going back to
++a single runqueue design is that once multiple runqueues are introduced,
++per-CPU or otherwise, there will be complex interactions as each runqueue will
++be responsible for the scheduling latency and fairness of the tasks only on its
++own runqueue, and to achieve fairness and low latency across multiple CPUs, any
++advantage in throughput of having CPU local tasks causes other disadvantages.
++This is due to requiring a very complex balancing system to at best achieve some
++semblance of fairness across CPUs and can only maintain relatively low latency
++for tasks bound to the same CPUs, not across them. To increase said fairness
++and latency across CPUs, the advantage of local runqueue locking, which makes
++for better scalability, is lost due to having to grab multiple locks.
++
++A significant feature of BFS is that all accounting is done purely based on CPU
++used and nowhere is sleep time used in any way to determine entitlement or
++interactivity. Interactivity "estimators" that use some kind of sleep/run
++algorithm are doomed to fail to detect all interactive tasks, and to falsely tag
++tasks that aren't interactive as being so. The reason for this is that it is
++close to impossible to determine that when a task is sleeping, whether it is
++doing it voluntarily, as in a userspace application waiting for input in the
++form of a mouse click or otherwise, or involuntarily, because it is waiting for
++another thread, process, I/O, kernel activity or whatever. Thus, such an
++estimator will introduce corner cases, and more heuristics will be required to
++cope with those corner cases, introducing more corner cases and failed
++interactivity detection and so on. Interactivity in BFS is built into the design
++by virtue of the fact that tasks that are waking up have not used up their quota
++of CPU time, and have earlier effective deadlines, thereby making it very likely
++they will preempt any CPU bound task of equivalent nice level. See below for
++more information on the virtual deadline mechanism. Even if they do not preempt
++a running task, because the rr interval is guaranteed to have a bound upper
++limit on how long a task will wait for, it will be scheduled within a timeframe
++that will not cause visible interface jitter.
++
++
++Design details.
++
++Task insertion.
++
++BFS inserts tasks into each relevant queue as an O(1) insertion into a double
++linked list. On insertion, *every* running queue is checked to see if the newly
++queued task can run on any idle queue, or preempt the lowest running task on the
++system. This is how the cross-CPU scheduling of BFS achieves significantly lower
++latency per extra CPU the system has. In this case the lookup is, in the worst
++case scenario, O(n) where n is the number of CPUs on the system.
++
++Data protection.
++
++BFS has one single lock protecting the process local data of every task in the
++global queue. Thus every insertion, removal and modification of task data in the
++global runqueue needs to grab the global lock. However, once a task is taken by
++a CPU, the CPU has its own local data copy of the running process' accounting
++information which only that CPU accesses and modifies (such as during a
++timer tick) thus allowing the accounting data to be updated lockless. Once a
++CPU has taken a task to run, it removes it from the global queue. Thus the
++global queue only ever has, at most,
++
++ (number of tasks requesting cpu time) - (number of logical CPUs) + 1
++
++tasks in the global queue. This value is relevant for the time taken to look up
++tasks during scheduling. This will increase if many tasks with CPU affinity set
++in their policy to limit which CPUs they're allowed to run on if they outnumber
++the number of CPUs. The +1 is because when rescheduling a task, the CPU's
++currently running task is put back on the queue. Lookup will be described after
++the virtual deadline mechanism is explained.
++
++Virtual deadline.
++
++The key to achieving low latency, scheduling fairness, and "nice level"
++distribution in BFS is entirely in the virtual deadline mechanism. The one
++tunable in BFS is the rr_interval, or "round robin interval". This is the
++maximum time two SCHED_OTHER (or SCHED_NORMAL, the common scheduling policy)
++tasks of the same nice level will be running for, or looking at it the other
++way around, the longest duration two tasks of the same nice level will be
++delayed for. When a task requests cpu time, it is given a quota (time_slice)
++equal to the rr_interval and a virtual deadline. The virtual deadline is
++offset from the current time in jiffies by this equation:
++
++ jiffies + (prio_ratio * rr_interval)
++
++The prio_ratio is determined as a ratio compared to the baseline of nice -20
++and increases by 10% per nice level. The deadline is a virtual one only in that
++no guarantee is placed that a task will actually be scheduled by this time, but
++it is used to compare which task should go next. There are three components to
++how a task is next chosen. First is time_slice expiration. If a task runs out
++of its time_slice, it is descheduled, the time_slice is refilled, and the
++deadline reset to that formula above. Second is sleep, where a task no longer
++is requesting CPU for whatever reason. The time_slice and deadline are _not_
++adjusted in this case and are just carried over for when the task is next
++scheduled. Third is preemption, and that is when a newly waking task is deemed
++higher priority than a currently running task on any cpu by virtue of the fact
++that it has an earlier virtual deadline than the currently running task. The
++earlier deadline is the key to which task is next chosen for the first and
++second cases. Once a task is descheduled, it is put back on the queue, and an
++O(n) lookup of all queued-but-not-running tasks is done to determine which has
++the earliest deadline and that task is chosen to receive CPU next.
++
++The CPU proportion of different nice tasks works out to be approximately the
++
++ (prio_ratio difference)^2
++
++The reason it is squared is that a task's deadline does not change while it is
++running unless it runs out of time_slice. Thus, even if the time actually
++passes the deadline of another task that is queued, it will not get CPU time
++unless the current running task deschedules, and the time "base" (jiffies) is
++constantly moving.
++
++Task lookup.
++
++BFS has 103 priority queues. 100 of these are dedicated to the static priority
++of realtime tasks, and the remaining 3 are, in order of best to worst priority,
++SCHED_ISO (isochronous), SCHED_NORMAL, and SCHED_IDLEPRIO (idle priority
++scheduling). When a task of these priorities is queued, a bitmap of running
++priorities is set showing which of these priorities has tasks waiting for CPU
++time. When a CPU is made to reschedule, the lookup for the next task to get
++CPU time is performed in the following way:
++
++First the bitmap is checked to see what static priority tasks are queued. If
++any realtime priorities are found, the corresponding queue is checked and the
++first task listed there is taken (provided CPU affinity is suitable) and lookup
++is complete. If the priority corresponds to a SCHED_ISO task, they are also
++taken in FIFO order (as they behave like SCHED_RR). If the priority corresponds
++to either SCHED_NORMAL or SCHED_IDLEPRIO, then the lookup becomes O(n). At this
++stage, every task in the runlist that corresponds to that priority is checked
++to see which has the earliest set deadline, and (provided it has suitable CPU
++affinity) it is taken off the runqueue and given the CPU. If a task has an
++expired deadline, it is taken and the rest of the lookup aborted (as they are
++chosen in FIFO order).
++
++Thus, the lookup is O(n) in the worst case only, where n is as described
++earlier, as tasks may be chosen before the whole task list is looked over.
++
++
++Scalability.
++
++The major limitations of BFS will be that of scalability, as the separate
++runqueue designs will have less lock contention as the number of CPUs rises.
++However they do not scale linearly even with separate runqueues as multiple
++runqueues will need to be locked concurrently on such designs to be able to
++achieve fair CPU balancing, to try and achieve some sort of nice-level fairness
++across CPUs, and to achieve low enough latency for tasks on a busy CPU when
++other CPUs would be more suited. BFS has the advantage that it requires no
++balancing algorithm whatsoever, as balancing occurs by proxy simply because
++all CPUs draw off the global runqueue, in priority and deadline order. Despite
++the fact that scalability is _not_ the prime concern of BFS, it both shows very
++good scalability to smaller numbers of CPUs and is likely a more scalable design
++at these numbers of CPUs.
++
++It also has some very low overhead scalability features built into the design
++when it has been deemed their overhead is so marginal that they're worth adding.
++The first is the local copy of the running process' data to the CPU it's running
++on to allow that data to be updated lockless where possible. Then there is
++deference paid to the last CPU a task was running on, by trying that CPU first
++when looking for an idle CPU to use the next time it's scheduled. Finally there
++is the notion of cache locality beyond the last running CPU. The sched_domains
++information is used to determine the relative virtual "cache distance" that
++other CPUs have from the last CPU a task was running on. CPUs with shared
++caches, such as SMT siblings, or multicore CPUs with shared caches, are treated
++as cache local. CPUs without shared caches are treated as not cache local, and
++CPUs on different NUMA nodes are treated as very distant. This "relative cache
++distance" is used by modifying the virtual deadline value when doing lookups.
++Effectively, the deadline is unaltered between "cache local" CPUs, doubled for
++"cache distant" CPUs, and quadrupled for "very distant" CPUs. The reasoning
++behind the doubling of deadlines is as follows. The real cost of migrating a
++task from one CPU to another is entirely dependant on the cache footprint of
++the task, how cache intensive the task is, how long it's been running on that
++CPU to take up the bulk of its cache, how big the CPU cache is, how fast and
++how layered the CPU cache is, how fast a context switch is... and so on. In
++other words, it's close to random in the real world where we do more than just
++one sole workload. The only thing we can be sure of is that it's not free. So
++BFS uses the principle that an idle CPU is a wasted CPU and utilising idle CPUs
++is more important than cache locality, and cache locality only plays a part
++after that. Doubling the effective deadline is based on the premise that the
++"cache local" CPUs will tend to work on the same tasks up to double the number
++of cache local CPUs, and once the workload is beyond that amount, it is likely
++that none of the tasks are cache warm anywhere anyway. The quadrupling for NUMA
++is a value I pulled out of my arse.
++
++When choosing an idle CPU for a waking task, the cache locality is determined
++according to where the task last ran and then idle CPUs are ranked from best
++to worst to choose the most suitable idle CPU based on cache locality, NUMA
++node locality and hyperthread sibling business. They are chosen in the
++following preference (if idle):
++
++* Same core, idle or busy cache, idle threads
++* Other core, same cache, idle or busy cache, idle threads.
++* Same node, other CPU, idle cache, idle threads.
++* Same node, other CPU, busy cache, idle threads.
++* Same core, busy threads.
++* Other core, same cache, busy threads.
++* Same node, other CPU, busy threads.
++* Other node, other CPU, idle cache, idle threads.
++* Other node, other CPU, busy cache, idle threads.
++* Other node, other CPU, busy threads.
++
++This shows the SMT or "hyperthread" awareness in the design as well which will
++choose a real idle core first before a logical SMT sibling which already has
++tasks on the physical CPU.
++
++Early benchmarking of BFS suggested scalability dropped off at the 16 CPU mark.
++However this benchmarking was performed on an earlier design that was far less
++scalable than the current one so it's hard to know how scalable it is in terms
++of both CPUs (due to the global runqueue) and heavily loaded machines (due to
++O(n) lookup) at this stage. Note that in terms of scalability, the number of
++_logical_ CPUs matters, not the number of _physical_ CPUs. Thus, a dual (2x)
++quad core (4X) hyperthreaded (2X) machine is effectively a 16X. Newer benchmark
++results are very promising indeed, without needing to tweak any knobs, features
++or options. Benchmark contributions are most welcome.
++
++
++Features
++
++As the initial prime target audience for BFS was the average desktop user, it
++was designed to not need tweaking, tuning or have features set to obtain benefit
++from it. Thus the number of knobs and features has been kept to an absolute
++minimum and should not require extra user input for the vast majority of cases.
++There are precisely 2 tunables, and 2 extra scheduling policies. The rr_interval
++and iso_cpu tunables, and the SCHED_ISO and SCHED_IDLEPRIO policies. In addition
++to this, BFS also uses sub-tick accounting. What BFS does _not_ now feature is
++support for CGROUPS. The average user should neither need to know what these
++are, nor should they need to be using them to have good desktop behaviour.
++
++rr_interval
++
++There is only one "scheduler" tunable, the round robin interval. This can be
++accessed in
++
++ /proc/sys/kernel/rr_interval
++
++The value is in milliseconds, and the default value is set to 6 on a
++uniprocessor machine, and automatically set to a progressively higher value on
++multiprocessor machines. The reasoning behind increasing the value on more CPUs
++is that the effective latency is decreased by virtue of there being more CPUs on
++BFS (for reasons explained above), and increasing the value allows for less
++cache contention and more throughput. Valid values are from 1 to 1000
++Decreasing the value will decrease latencies at the cost of decreasing
++throughput, while increasing it will improve throughput, but at the cost of
++worsening latencies. The accuracy of the rr interval is limited by HZ resolution
++of the kernel configuration. Thus, the worst case latencies are usually slightly
++higher than this actual value. The default value of 6 is not an arbitrary one.
++It is based on the fact that humans can detect jitter at approximately 7ms, so
++aiming for much lower latencies is pointless under most circumstances. It is
++worth noting this fact when comparing the latency performance of BFS to other
++schedulers. Worst case latencies being higher than 7ms are far worse than
++average latencies not being in the microsecond range.
++
++Isochronous scheduling.
++
++Isochronous scheduling is a unique scheduling policy designed to provide
++near-real-time performance to unprivileged (ie non-root) users without the
++ability to starve the machine indefinitely. Isochronous tasks (which means
++"same time") are set using, for example, the schedtool application like so:
++
++ schedtool -I -e amarok
++
++This will start the audio application "amarok" as SCHED_ISO. How SCHED_ISO works
++is that it has a priority level between true realtime tasks and SCHED_NORMAL
++which would allow them to preempt all normal tasks, in a SCHED_RR fashion (ie,
++if multiple SCHED_ISO tasks are running, they purely round robin at rr_interval
++rate). However if ISO tasks run for more than a tunable finite amount of time,
++they are then demoted back to SCHED_NORMAL scheduling. This finite amount of
++time is the percentage of _total CPU_ available across the machine, configurable
++as a percentage in the following "resource handling" tunable (as opposed to a
++scheduler tunable):
++
++ /proc/sys/kernel/iso_cpu
++
++and is set to 70% by default. It is calculated over a rolling 5 second average
++Because it is the total CPU available, it means that on a multi CPU machine, it
++is possible to have an ISO task running as realtime scheduling indefinitely on
++just one CPU, as the other CPUs will be available. Setting this to 100 is the
++equivalent of giving all users SCHED_RR access and setting it to 0 removes the
++ability to run any pseudo-realtime tasks.
++
++A feature of BFS is that it detects when an application tries to obtain a
++realtime policy (SCHED_RR or SCHED_FIFO) and the caller does not have the
++appropriate privileges to use those policies. When it detects this, it will
++give the task SCHED_ISO policy instead. Thus it is transparent to the user.
++Because some applications constantly set their policy as well as their nice
++level, there is potential for them to undo the override specified by the user
++on the command line of setting the policy to SCHED_ISO. To counter this, once
++a task has been set to SCHED_ISO policy, it needs superuser privileges to set
++it back to SCHED_NORMAL. This will ensure the task remains ISO and all child
++processes and threads will also inherit the ISO policy.
++
++Idleprio scheduling.
++
++Idleprio scheduling is a scheduling policy designed to give out CPU to a task
++_only_ when the CPU would be otherwise idle. The idea behind this is to allow
++ultra low priority tasks to be run in the background that have virtually no
++effect on the foreground tasks. This is ideally suited to distributed computing
++clients (like setiathome, folding, mprime etc) but can also be used to start
++a video encode or so on without any slowdown of other tasks. To avoid this
++policy from grabbing shared resources and holding them indefinitely, if it
++detects a state where the task is waiting on I/O, the machine is about to
++suspend to ram and so on, it will transiently schedule them as SCHED_NORMAL. As
++per the Isochronous task management, once a task has been scheduled as IDLEPRIO,
++it cannot be put back to SCHED_NORMAL without superuser privileges. Tasks can
++be set to start as SCHED_IDLEPRIO with the schedtool command like so:
++
++ schedtool -D -e ./mprime
++
++Subtick accounting.
++
++It is surprisingly difficult to get accurate CPU accounting, and in many cases,
++the accounting is done by simply determining what is happening at the precise
++moment a timer tick fires off. This becomes increasingly inaccurate as the
++timer tick frequency (HZ) is lowered. It is possible to create an application
++which uses almost 100% CPU, yet by being descheduled at the right time, records
++zero CPU usage. While the main problem with this is that there are possible
++security implications, it is also difficult to determine how much CPU a task
++really does use. BFS tries to use the sub-tick accounting from the TSC clock,
++where possible, to determine real CPU usage. This is not entirely reliable, but
++is far more likely to produce accurate CPU usage data than the existing designs
++and will not show tasks as consuming no CPU usage when they actually are. Thus,
++the amount of CPU reported as being used by BFS will more accurately represent
++how much CPU the task itself is using (as is shown for example by the 'time'
++application), so the reported values may be quite different to other schedulers.
++Values reported as the 'load' are more prone to problems with this design, but
++per process values are closer to real usage. When comparing throughput of BFS
++to other designs, it is important to compare the actual completed work in terms
++of total wall clock time taken and total work done, rather than the reported
++"cpu usage".
++
++
++Con Kolivas <kernel@kolivas.org> Fri Aug 27 2010
+diff -Nur a/Documentation/scheduler/sched-MuQSS.txt b/Documentation/scheduler/sched-MuQSS.txt
+--- a/Documentation/scheduler/sched-MuQSS.txt 1970-01-01 01:00:00.000000000 +0100
++++ b/Documentation/scheduler/sched-MuQSS.txt 2019-07-07 09:17:41.241241144 +0100
+@@ -0,0 +1,373 @@
++MuQSS - The Multiple Queue Skiplist Scheduler by Con Kolivas.
++
++MuQSS is a per-cpu runqueue variant of the original BFS scheduler with
++one 8 level skiplist per runqueue, and fine grained locking for much more
++scalability.
++
++
++Goals.
++
++The goal of the Multiple Queue Skiplist Scheduler, referred to as MuQSS from
++here on (pronounced mux) is to completely do away with the complex designs of
++the past for the cpu process scheduler and instead implement one that is very
++simple in basic design. The main focus of MuQSS is to achieve excellent desktop
++interactivity and responsiveness without heuristics and tuning knobs that are
++difficult to understand, impossible to model and predict the effect of, and when
++tuned to one workload cause massive detriment to another, while still being
++scalable to many CPUs and processes.
++
++
++Design summary.
++
++MuQSS is best described as per-cpu multiple runqueue, O(log n) insertion, O(1)
++lookup, earliest effective virtual deadline first tickless design, loosely based
++on EEVDF (earliest eligible virtual deadline first) and my previous Staircase
++Deadline scheduler, and evolved from the single runqueue O(n) BFS scheduler.
++Each component shall be described in order to understand the significance of,
++and reasoning for it.
++
++
++Design reasoning.
++
++In BFS, the use of a single runqueue across all CPUs meant that each CPU would
++need to scan the entire runqueue looking for the process with the earliest
++deadline and schedule that next, regardless of which CPU it originally came
++from. This made BFS deterministic with respect to latency and provided
++guaranteed latencies dependent on number of processes and CPUs. The single
++runqueue, however, meant that all CPUs would compete for the single lock
++protecting it, which would lead to increasing lock contention as the number of
++CPUs rose and appeared to limit scalability of common workloads beyond 16
++logical CPUs. Additionally, the O(n) lookup of the runqueue list obviously
++increased overhead proportionate to the number of queued proecesses and led to
++cache thrashing while iterating over the linked list.
++
++MuQSS is an evolution of BFS, designed to maintain the same scheduling
++decision mechanism and be virtually deterministic without relying on the
++constrained design of the single runqueue by splitting out the single runqueue
++to be per-CPU and use skiplists instead of linked lists.
++
++The original reason for going back to a single runqueue design for BFS was that
++once multiple runqueues are introduced, per-CPU or otherwise, there will be
++complex interactions as each runqueue will be responsible for the scheduling
++latency and fairness of the tasks only on its own runqueue, and to achieve
++fairness and low latency across multiple CPUs, any advantage in throughput of
++having CPU local tasks causes other disadvantages. This is due to requiring a
++very complex balancing system to at best achieve some semblance of fairness
++across CPUs and can only maintain relatively low latency for tasks bound to the
++same CPUs, not across them. To increase said fairness and latency across CPUs,
++the advantage of local runqueue locking, which makes for better scalability, is
++lost due to having to grab multiple locks.
++
++MuQSS works around the problems inherent in multiple runqueue designs by
++making its skip lists priority ordered and through novel use of lockless
++examination of each other runqueue it can decide if it should take the earliest
++deadline task from another runqueue for latency reasons, or for CPU balancing
++reasons. It still does not have a balancing system, choosing to allow the
++next task scheduling decision and task wakeup CPU choice to allow balancing to
++happen by virtue of its choices.
++
++As a further evolution of the design, MuQSS normally configures sharing of
++runqueues in a logical fashion for when CPU resources are shared for improved
++latency and throughput. By default it shares runqueues and locks between
++multicore siblings. Optionally it can be configured to run with sharing of
++SMT siblings only, all SMP packages or no sharing at all. Additionally it can
++be selected at boot time.
++
++
++Design details.
++
++Custom skip list implementation:
++
++To avoid the overhead of building up and tearing down skip list structures,
++the variant used by MuQSS has a number of optimisations making it specific for
++its use case in the scheduler. It uses static arrays of 8 'levels' instead of
++building up and tearing down structures dynamically. This makes each runqueue
++only scale O(log N) up to 64k tasks. However as there is one runqueue per CPU
++it means that it scales O(log N) up to 64k x number of logical CPUs which is
++far beyond the realistic task limits each CPU could handle. By being 8 levels
++it also makes the array exactly one cacheline in size. Additionally, each
++skip list node is bidirectional making insertion and removal amortised O(1),
++being O(k) where k is 1-8. Uniquely, we are only ever interested in the very
++first entry in each list at all times with MuQSS, so there is never a need to
++do a search and thus look up is always O(1). In interactive mode, the queues
++will be searched beyond their first entry if the first task is not suitable
++for affinity or SMT nice reasons.
++
++Task insertion:
++
++MuQSS inserts tasks into a per CPU runqueue as an O(log N) insertion into
++a custom skip list as described above (based on the original design by William
++Pugh). Insertion is ordered in such a way that there is never a need to do a
++search by ordering tasks according to static priority primarily, and then
++virtual deadline at the time of insertion.
++
++Niffies:
++
++Niffies are a monotonic forward moving timer not unlike the "jiffies" but are
++of nanosecond resolution. Niffies are calculated per-runqueue from the high
++resolution TSC timers, and in order to maintain fairness are synchronised
++between CPUs whenever both runqueues are locked concurrently.
++
++Virtual deadline:
++
++The key to achieving low latency, scheduling fairness, and "nice level"
++distribution in MuQSS is entirely in the virtual deadline mechanism. The one
++tunable in MuQSS is the rr_interval, or "round robin interval". This is the
++maximum time two SCHED_OTHER (or SCHED_NORMAL, the common scheduling policy)
++tasks of the same nice level will be running for, or looking at it the other
++way around, the longest duration two tasks of the same nice level will be
++delayed for. When a task requests cpu time, it is given a quota (time_slice)
++equal to the rr_interval and a virtual deadline. The virtual deadline is
++offset from the current time in niffies by this equation:
++
++ niffies + (prio_ratio * rr_interval)
++
++The prio_ratio is determined as a ratio compared to the baseline of nice -20
++and increases by 10% per nice level. The deadline is a virtual one only in that
++no guarantee is placed that a task will actually be scheduled by this time, but
++it is used to compare which task should go next. There are three components to
++how a task is next chosen. First is time_slice expiration. If a task runs out
++of its time_slice, it is descheduled, the time_slice is refilled, and the
++deadline reset to that formula above. Second is sleep, where a task no longer
++is requesting CPU for whatever reason. The time_slice and deadline are _not_
++adjusted in this case and are just carried over for when the task is next
++scheduled. Third is preemption, and that is when a newly waking task is deemed
++higher priority than a currently running task on any cpu by virtue of the fact
++that it has an earlier virtual deadline than the currently running task. The
++earlier deadline is the key to which task is next chosen for the first and
++second cases.
++
++The CPU proportion of different nice tasks works out to be approximately the
++
++ (prio_ratio difference)^2
++
++The reason it is squared is that a task's deadline does not change while it is
++running unless it runs out of time_slice. Thus, even if the time actually
++passes the deadline of another task that is queued, it will not get CPU time
++unless the current running task deschedules, and the time "base" (niffies) is
++constantly moving.
++
++Task lookup:
++
++As tasks are already pre-ordered according to anticipated scheduling order in
++the skip lists, lookup for the next suitable task per-runqueue is always a
++matter of simply selecting the first task in the 0th level skip list entry.
++In order to maintain optimal latency and fairness across CPUs, MuQSS does a
++novel examination of every other runqueue in cache locality order, choosing the
++best task across all runqueues. This provides near-determinism of how long any
++task across the entire system may wait before receiving CPU time. The other
++runqueues are first examine lockless and then trylocked to minimise the
++potential lock contention if they are likely to have a suitable better task.
++Each other runqueue lock is only held for as long as it takes to examine the
++entry for suitability. In "interactive" mode, the default setting, MuQSS will
++look for the best deadline task across all CPUs, while in !interactive mode,
++it will only select a better deadline task from another CPU if it is more
++heavily laden than the current one.
++
++Lookup is therefore O(k) where k is number of CPUs.
++
++
++Latency.
++
++Through the use of virtual deadlines to govern the scheduling order of normal
++tasks, queue-to-activation latency per runqueue is guaranteed to be bound by
++the rr_interval tunable which is set to 6ms by default. This means that the
++longest a CPU bound task will wait for more CPU is proportional to the number
++of running tasks and in the common case of 0-2 running tasks per CPU, will be
++under the 7ms threshold for human perception of jitter. Additionally, as newly
++woken tasks will have an early deadline from their previous runtime, the very
++tasks that are usually latency sensitive will have the shortest interval for
++activation, usually preempting any existing CPU bound tasks.
++
++Tickless expiry:
++
++A feature of MuQSS is that it is not tied to the resolution of the chosen tick
++rate in Hz, instead depending entirely on the high resolution timers where
++possible for sub-millisecond accuracy on timeouts regarless of the underlying
++tick rate. This allows MuQSS to be run with the low overhead of low Hz rates
++such as 100 by default, benefiting from the improved throughput and lower
++power usage it provides. Another advantage of this approach is that in
++combination with the Full No HZ option, which disables ticks on running task
++CPUs instead of just idle CPUs, the tick can be disabled at all times
++regardless of how many tasks are running instead of being limited to just one
++running task. Note that this option is NOT recommended for regular desktop
++users.
++
++
++Scalability and balancing.
++
++Unlike traditional approaches where balancing is a combination of CPU selection
++at task wakeup and intermittent balancing based on a vast array of rules set
++according to architecture, busyness calculations and special case management,
++MuQSS indirectly balances on the fly at task wakeup and next task selection.
++During initialisation, MuQSS creates a cache coherency ordered list of CPUs for
++each logical CPU and uses this to aid task/CPU selection when CPUs are busy.
++Additionally it selects any idle CPUs, if they are available, at any time over
++busy CPUs according to the following preference:
++
++ * Same thread, idle or busy cache, idle or busy threads
++ * Other core, same cache, idle or busy cache, idle threads.
++ * Same node, other CPU, idle cache, idle threads.
++ * Same node, other CPU, busy cache, idle threads.
++ * Other core, same cache, busy threads.
++ * Same node, other CPU, busy threads.
++ * Other node, other CPU, idle cache, idle threads.
++ * Other node, other CPU, busy cache, idle threads.
++ * Other node, other CPU, busy threads.
++
++Mux is therefore SMT, MC and Numa aware without the need for extra
++intermittent balancing to maintain CPUs busy and make the most of cache
++coherency.
++
++
++Features
++
++As the initial prime target audience for MuQSS was the average desktop user, it
++was designed to not need tweaking, tuning or have features set to obtain benefit
++from it. Thus the number of knobs and features has been kept to an absolute
++minimum and should not require extra user input for the vast majority of cases.
++There are 3 optional tunables, and 2 extra scheduling policies. The rr_interval,
++interactive, and iso_cpu tunables, and the SCHED_ISO and SCHED_IDLEPRIO
++policies. In addition to this, MuQSS also uses sub-tick accounting. What MuQSS
++does _not_ now feature is support for CGROUPS. The average user should neither
++need to know what these are, nor should they need to be using them to have good
++desktop behaviour. However since some applications refuse to work without
++cgroups, one can enable them with MuQSS as a stub and the filesystem will be
++created which will allow the applications to work.
++
++rr_interval:
++
++ /proc/sys/kernel/rr_interval
++
++The value is in milliseconds, and the default value is set to 6. Valid values
++are from 1 to 1000 Decreasing the value will decrease latencies at the cost of
++decreasing throughput, while increasing it will improve throughput, but at the
++cost of worsening latencies. It is based on the fact that humans can detect
++jitter at approximately 7ms, so aiming for much lower latencies is pointless
++under most circumstances. It is worth noting this fact when comparing the
++latency performance of MuQSS to other schedulers. Worst case latencies being
++higher than 7ms are far worse than average latencies not being in the
++microsecond range.
++
++interactive:
++
++ /proc/sys/kernel/interactive
++
++The value is a simple boolean of 1 for on and 0 for off and is set to on by
++default. Disabling this will disable the near-determinism of MuQSS when
++selecting the next task by not examining all CPUs for the earliest deadline
++task, or which CPU to wake to, instead prioritising CPU balancing for improved
++throughput. Latency will still be bound by rr_interval, but on a per-CPU basis
++instead of across the whole system.
++
++Runqueue sharing.
++
++By default MuQSS chooses to share runqueue resources (specifically the skip
++list and locking) between multicore siblings. It is configurable at build time
++to select between None, SMT, MC and SMP, corresponding to no sharing, sharing
++only between simultaneous mulithreading siblings, multicore siblings, or
++symmetric multiprocessing physical packages. Additionally it can be se at
++bootime with the use of the rqshare parameter. The reason for configurability
++is that some architectures have CPUs with many multicore siblings (>= 16)
++where it may be detrimental to throughput to share runqueues and another
++sharing option may be desirable. Additionally, more sharing than usual can
++improve latency on a system-wide level at the expense of throughput if desired.
++
++The options are:
++none, smt, mc, smp
++
++eg:
++ rqshare=mc
++
++Isochronous scheduling:
++
++Isochronous scheduling is a unique scheduling policy designed to provide
++near-real-time performance to unprivileged (ie non-root) users without the
++ability to starve the machine indefinitely. Isochronous tasks (which means
++"same time") are set using, for example, the schedtool application like so:
++
++ schedtool -I -e amarok
++
++This will start the audio application "amarok" as SCHED_ISO. How SCHED_ISO works
++is that it has a priority level between true realtime tasks and SCHED_NORMAL
++which would allow them to preempt all normal tasks, in a SCHED_RR fashion (ie,
++if multiple SCHED_ISO tasks are running, they purely round robin at rr_interval
++rate). However if ISO tasks run for more than a tunable finite amount of time,
++they are then demoted back to SCHED_NORMAL scheduling. This finite amount of
++time is the percentage of CPU available per CPU, configurable as a percentage in
++the following "resource handling" tunable (as opposed to a scheduler tunable):
++
++iso_cpu:
++
++ /proc/sys/kernel/iso_cpu
++
++and is set to 70% by default. It is calculated over a rolling 5 second average
++Because it is the total CPU available, it means that on a multi CPU machine, it
++is possible to have an ISO task running as realtime scheduling indefinitely on
++just one CPU, as the other CPUs will be available. Setting this to 100 is the
++equivalent of giving all users SCHED_RR access and setting it to 0 removes the
++ability to run any pseudo-realtime tasks.
++
++A feature of MuQSS is that it detects when an application tries to obtain a
++realtime policy (SCHED_RR or SCHED_FIFO) and the caller does not have the
++appropriate privileges to use those policies. When it detects this, it will
++give the task SCHED_ISO policy instead. Thus it is transparent to the user.
++
++
++Idleprio scheduling:
++
++Idleprio scheduling is a scheduling policy designed to give out CPU to a task
++_only_ when the CPU would be otherwise idle. The idea behind this is to allow
++ultra low priority tasks to be run in the background that have virtually no
++effect on the foreground tasks. This is ideally suited to distributed computing
++clients (like setiathome, folding, mprime etc) but can also be used to start a
++video encode or so on without any slowdown of other tasks. To avoid this policy
++from grabbing shared resources and holding them indefinitely, if it detects a
++state where the task is waiting on I/O, the machine is about to suspend to ram
++and so on, it will transiently schedule them as SCHED_NORMAL. Once a task has
++been scheduled as IDLEPRIO, it cannot be put back to SCHED_NORMAL without
++superuser privileges since it is effectively a lower scheduling policy. Tasks
++can be set to start as SCHED_IDLEPRIO with the schedtool command like so:
++
++schedtool -D -e ./mprime
++
++Subtick accounting:
++
++It is surprisingly difficult to get accurate CPU accounting, and in many cases,
++the accounting is done by simply determining what is happening at the precise
++moment a timer tick fires off. This becomes increasingly inaccurate as the timer
++tick frequency (HZ) is lowered. It is possible to create an application which
++uses almost 100% CPU, yet by being descheduled at the right time, records zero
++CPU usage. While the main problem with this is that there are possible security
++implications, it is also difficult to determine how much CPU a task really does
++use. Mux uses sub-tick accounting from the TSC clock to determine real CPU
++usage. Thus, the amount of CPU reported as being used by MuQSS will more
++accurately represent how much CPU the task itself is using (as is shown for
++example by the 'time' application), so the reported values may be quite
++different to other schedulers. When comparing throughput of MuQSS to other
++designs, it is important to compare the actual completed work in terms of total
++wall clock time taken and total work done, rather than the reported "cpu usage".
++
++Symmetric MultiThreading (SMT) aware nice:
++
++SMT, a.k.a. hyperthreading, is a very common feature on modern CPUs. While the
++logical CPU count rises by adding thread units to each CPU core, allowing more
++than one task to be run simultaneously on the same core, the disadvantage of it
++is that the CPU power is shared between the tasks, not summating to the power
++of two CPUs. The practical upshot of this is that two tasks running on
++separate threads of the same core run significantly slower than if they had one
++core each to run on. While smart CPU selection allows each task to have a core
++to itself whenever available (as is done on MuQSS), it cannot offset the
++slowdown that occurs when the cores are all loaded and only a thread is left.
++Most of the time this is harmless as the CPU is effectively overloaded at this
++point and the extra thread is of benefit. However when running a niced task in
++the presence of an un-niced task (say nice 19 v nice 0), the nice task gets
++precisely the same amount of CPU power as the unniced one. MuQSS has an
++optional configuration feature known as SMT-NICE which selectively idles the
++secondary niced thread for a period proportional to the nice difference,
++allowing CPU distribution according to nice level to be maintained, at the
++expense of a small amount of extra overhead. If this is configured in on a
++machine without SMT threads, the overhead is minimal.
++
++
++Con Kolivas <kernel@kolivas.org> Sat, 29th October 2016
+diff -Nur a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
+--- a/Documentation/sysctl/kernel.txt 2019-07-07 09:08:19.122347611 +0100
++++ b/Documentation/sysctl/kernel.txt 2019-07-07 09:17:41.251241479 +0100
+@@ -41,6 +41,7 @@
+ - hung_task_check_interval_secs
+ - hung_task_warnings
+ - hyperv_record_panic_msg
++- iso_cpu
+ - kexec_load_disabled
+ - kptr_restrict
+ - l2cr [ PPC only ]
+@@ -77,6 +78,7 @@
+ - randomize_va_space
+ - real-root-dev ==> Documentation/admin-guide/initrd.rst
+ - reboot-cmd [ SPARC only ]
++- rr_interval
+ - rtsig-max
+ - rtsig-nr
+ - sched_energy_aware
+@@ -101,6 +103,7 @@
+ - unknown_nmi_panic
+ - watchdog
+ - watchdog_thresh
++- yield_type
+ - version
+
+ ==============================================================
+@@ -439,6 +442,16 @@
+
+ ==============================================================
+
++iso_cpu: (MuQSS CPU scheduler only).
++
++This sets the percentage cpu that the unprivileged SCHED_ISO tasks can
++run effectively at realtime priority, averaged over a rolling five
++seconds over the -whole- system, meaning all cpus.
++
++Set to 70 (percent) by default.
++
++==============================================================
++
+ l2cr: (PPC only)
+
+ This flag controls the L2 cache of G3 processor boards. If
+@@ -882,6 +895,20 @@
+
+ ==============================================================
+
++rr_interval: (MuQSS CPU scheduler only)
++
++This is the smallest duration that any cpu process scheduling unit
++will run for. Increasing this value can increase throughput of cpu
++bound tasks substantially but at the expense of increased latencies
++overall. Conversely decreasing it will decrease average and maximum
++latencies but at the expense of throughput. This value is in
++milliseconds and the default value chosen depends on the number of
++cpus available at scheduler initialisation with a minimum of 6.
++
++Valid values are from 1-1000.
++
++==============================================================
++
+ rtsig-max & rtsig-nr:
+
+ The file rtsig-max can be used to tune the maximum number
+@@ -1164,3 +1191,13 @@
+ tunable to zero will disable lockup detection altogether.
+
+ ==============================================================
++
++yield_type: (MuQSS CPU scheduler only)
++
++This determines what type of yield calls to sched_yield will perform.
++
++ 0: No yield.
++ 1: Yield only to better priority/deadline tasks. (default)
++ 2: Expire timeslice and recalculate deadline.
++
++==============================================================
+diff -Nur a/fs/proc/base.c b/fs/proc/base.c
+--- a/fs/proc/base.c 2019-06-25 04:34:56.000000000 +0100
++++ b/fs/proc/base.c 2019-07-07 09:17:41.251241479 +0100
+@@ -463,7 +463,7 @@
+ seq_puts(m, "0 0 0\n");
+ else
+ seq_printf(m, "%llu %llu %lu\n",
+- (unsigned long long)task->se.sum_exec_runtime,
++ (unsigned long long)tsk_seruntime(task),
+ (unsigned long long)task->sched_info.run_delay,
+ task->sched_info.pcount);
+
+diff -Nur a/include/linux/init_task.h b/include/linux/init_task.h
+--- a/include/linux/init_task.h 2019-06-25 04:34:56.000000000 +0100
++++ b/include/linux/init_task.h 2019-07-07 09:17:41.251241479 +0100
+@@ -47,7 +47,11 @@
+ #define INIT_CPU_TIMERS(s)
+ #endif
+
++#ifdef CONFIG_SCHED_MUQSS
++#define INIT_TASK_COMM "MuQSS"
++#else
+ #define INIT_TASK_COMM "swapper"
++#endif
+
+ /* Attach to the init_task data structure for proper alignment */
+ #ifdef CONFIG_ARCH_TASK_STRUCT_ON_STACK
+diff -Nur a/include/linux/ioprio.h b/include/linux/ioprio.h
+--- a/include/linux/ioprio.h 2019-06-25 04:34:56.000000000 +0100
++++ b/include/linux/ioprio.h 2019-07-07 09:17:41.251241479 +0100
+@@ -53,6 +53,8 @@
+ */
+ static inline int task_nice_ioprio(struct task_struct *task)
+ {
++ if (iso_task(task))
++ return 0;
+ return (task_nice(task) + 20) / 5;
+ }
+
+diff -Nur a/include/linux/sched/nohz.h b/include/linux/sched/nohz.h
+--- a/include/linux/sched/nohz.h 2019-06-25 04:34:56.000000000 +0100
++++ b/include/linux/sched/nohz.h 2019-07-07 09:17:41.251241479 +0100
+@@ -6,7 +6,7 @@
+ * This is the interface between the scheduler and nohz/dynticks:
+ */
+
+-#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON)
++#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON) && !defined(CONFIG_SCHED_MUQSS)
+ extern void cpu_load_update_nohz_start(void);
+ extern void cpu_load_update_nohz_stop(void);
+ #else
+@@ -21,7 +21,7 @@
+ static inline void nohz_balance_enter_idle(int cpu) { }
+ #endif
+
+-#ifdef CONFIG_NO_HZ_COMMON
++#if defined(CONFIG_NO_HZ_COMMON) && !defined(CONFIG_SCHED_MUQSS)
+ void calc_load_nohz_start(void);
+ void calc_load_nohz_stop(void);
+ #else
+diff -Nur a/include/linux/sched/prio.h b/include/linux/sched/prio.h
+--- a/include/linux/sched/prio.h 2019-06-25 04:34:56.000000000 +0100
++++ b/include/linux/sched/prio.h 2019-07-07 09:17:41.251241479 +0100
+@@ -20,8 +20,20 @@
+ */
+
+ #define MAX_USER_RT_PRIO 100
++
++#ifdef CONFIG_SCHED_MUQSS
++/* Note different MAX_RT_PRIO */
++#define MAX_RT_PRIO (MAX_USER_RT_PRIO + 1)
++
++#define ISO_PRIO (MAX_RT_PRIO)
++#define NORMAL_PRIO (MAX_RT_PRIO + 1)
++#define IDLE_PRIO (MAX_RT_PRIO + 2)
++#define PRIO_LIMIT ((IDLE_PRIO) + 1)
++#else /* CONFIG_SCHED_MUQSS */
+ #define MAX_RT_PRIO MAX_USER_RT_PRIO
+
++#endif /* CONFIG_SCHED_MUQSS */
++
+ #define MAX_PRIO (MAX_RT_PRIO + NICE_WIDTH)
+ #define DEFAULT_PRIO (MAX_RT_PRIO + NICE_WIDTH / 2)
+
+diff -Nur a/include/linux/sched/rt.h b/include/linux/sched/rt.h
+--- a/include/linux/sched/rt.h 2019-06-25 04:34:56.000000000 +0100
++++ b/include/linux/sched/rt.h 2019-07-07 09:17:41.251241479 +0100
+@@ -24,8 +24,10 @@
+
+ if (policy == SCHED_FIFO || policy == SCHED_RR)
+ return true;
++#ifndef CONFIG_SCHED_MUQSS
+ if (policy == SCHED_DEADLINE)
+ return true;
++#endif
+ return false;
+ }
+
+diff -Nur a/include/linux/sched/task.h b/include/linux/sched/task.h
+--- a/include/linux/sched/task.h 2019-06-25 04:34:56.000000000 +0100
++++ b/include/linux/sched/task.h 2019-07-07 09:17:41.251241479 +0100
+@@ -82,7 +82,7 @@
+ extern void free_task(struct task_struct *tsk);
+
+ /* sched_exec is called by processes performing an exec */
+-#ifdef CONFIG_SMP
++#if defined(CONFIG_SMP) && !defined(CONFIG_SCHED_MUQSS)
+ extern void sched_exec(void);
+ #else
+ #define sched_exec() {}
+diff -Nur a/include/linux/sched.h b/include/linux/sched.h
+--- a/include/linux/sched.h 2019-06-25 04:34:56.000000000 +0100
++++ b/include/linux/sched.h 2019-07-07 09:17:41.251241479 +0100
+@@ -30,6 +30,9 @@
+ #include <linux/mm_types_task.h>
+ #include <linux/task_io_accounting.h>
+ #include <linux/rseq.h>
++#ifdef CONFIG_SCHED_MUQSS
++#include <linux/skip_list.h>
++#endif
+
+ /* task_struct member predeclarations (sorted alphabetically): */
+ struct audit_context;
+@@ -605,9 +608,11 @@
+ unsigned int flags;
+ unsigned int ptrace;
+
++#if defined(CONFIG_SMP) || defined(CONFIG_SCHED_MUQSS)
++ int on_cpu;
++#endif
+ #ifdef CONFIG_SMP
+ struct llist_node wake_entry;
+- int on_cpu;
+ #ifdef CONFIG_THREAD_INFO_IN_TASK
+ /* Current CPU: */
+ unsigned int cpu;
+@@ -632,10 +637,25 @@
+ int static_prio;
+ int normal_prio;
+ unsigned int rt_priority;
++#ifdef CONFIG_SCHED_MUQSS
++ int time_slice;
++ u64 deadline;
++ skiplist_node node; /* Skip list node */
++ u64 last_ran;
++ u64 sched_time; /* sched_clock time spent running */
++#ifdef CONFIG_SMT_NICE
++ int smt_bias; /* Policy/nice level bias across smt siblings */
++#endif
++#ifdef CONFIG_HOTPLUG_CPU
++ bool zerobound; /* Bound to CPU0 for hotplug */
++#endif
++ unsigned long rt_timeout;
++#else /* CONFIG_SCHED_MUQSS */
+
+ const struct sched_class *sched_class;
+ struct sched_entity se;
+ struct sched_rt_entity rt;
++#endif
+ #ifdef CONFIG_CGROUP_SCHED
+ struct task_group *sched_task_group;
+ #endif
+@@ -791,6 +811,10 @@
+ u64 utimescaled;
+ u64 stimescaled;
+ #endif
++#ifdef CONFIG_SCHED_MUQSS
++ /* Unbanked cpu time */
++ unsigned long utime_ns, stime_ns;
++#endif
+ u64 gtime;
+ struct prev_cputime prev_cputime;
+ #ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
+@@ -1217,6 +1241,40 @@
+ */
+ };
+
++#ifdef CONFIG_SCHED_MUQSS
++#define tsk_seruntime(t) ((t)->sched_time)
++#define tsk_rttimeout(t) ((t)->rt_timeout)
++
++static inline void tsk_cpus_current(struct task_struct *p)
++{
++}
++
++void print_scheduler_version(void);
++
++static inline bool iso_task(struct task_struct *p)
++{
++ return (p->policy == SCHED_ISO);
++}
++#else /* CFS */
++#define tsk_seruntime(t) ((t)->se.sum_exec_runtime)
++#define tsk_rttimeout(t) ((t)->rt.timeout)
++
++static inline void tsk_cpus_current(struct task_struct *p)
++{
++ p->nr_cpus_allowed = current->nr_cpus_allowed;
++}
++
++static inline void print_scheduler_version(void)
++{
++ printk(KERN_INFO "CFS CPU scheduler.\n");
++}
++
++static inline bool iso_task(struct task_struct *p)
++{
++ return false;
++}
++#endif /* CONFIG_SCHED_MUQSS */
++
+ static inline struct pid *task_pid(struct task_struct *task)
+ {
+ return task->thread_pid;
+diff -Nur a/include/linux/skip_list.h b/include/linux/skip_list.h
+--- a/include/linux/skip_list.h 1970-01-01 01:00:00.000000000 +0100
++++ b/include/linux/skip_list.h 2019-07-07 09:17:41.251241479 +0100
+@@ -0,0 +1,33 @@
++#ifndef _LINUX_SKIP_LISTS_H
++#define _LINUX_SKIP_LISTS_H
++typedef u64 keyType;
++typedef void *valueType;
++
++typedef struct nodeStructure skiplist_node;
++
++struct nodeStructure {
++ int level; /* Levels in this structure */
++ keyType key;
++ valueType value;
++ skiplist_node *next[8];
++ skiplist_node *prev[8];
++};
++
++typedef struct listStructure {
++ int entries;
++ int level; /* Maximum level of the list
++ (1 more than the number of levels in the list) */
++ skiplist_node *header; /* pointer to header */
++} skiplist;
++
++void skiplist_init(skiplist_node *slnode);
++skiplist *new_skiplist(skiplist_node *slnode);
++void free_skiplist(skiplist *l);
++void skiplist_node_init(skiplist_node *node);
++void skiplist_insert(skiplist *l, skiplist_node *node, keyType key, valueType value, unsigned int randseed);
++void skiplist_delete(skiplist *l, skiplist_node *node);
++
++static inline bool skiplist_node_empty(skiplist_node *node) {
++ return (!node->next[0]);
++}
++#endif /* _LINUX_SKIP_LISTS_H */
+diff -Nur a/include/uapi/linux/sched.h b/include/uapi/linux/sched.h
+--- a/include/uapi/linux/sched.h 2019-06-25 04:34:56.000000000 +0100
++++ b/include/uapi/linux/sched.h 2019-07-07 09:17:41.251241479 +0100
+@@ -37,9 +37,16 @@
+ #define SCHED_FIFO 1
+ #define SCHED_RR 2
+ #define SCHED_BATCH 3
+-/* SCHED_ISO: reserved but not implemented yet */
++/* SCHED_ISO: Implemented on MuQSS only */
+ #define SCHED_IDLE 5
++#ifdef CONFIG_SCHED_MUQSS
++#define SCHED_ISO 4
++#define SCHED_IDLEPRIO SCHED_IDLE
++#define SCHED_MAX (SCHED_IDLEPRIO)
++#define SCHED_RANGE(policy) ((policy) <= SCHED_MAX)
++#else /* CONFIG_SCHED_MUQSS */
+ #define SCHED_DEADLINE 6
++#endif /* CONFIG_SCHED_MUQSS */
+
+ /* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
+ #define SCHED_RESET_ON_FORK 0x40000000
+diff -Nur a/init/init_task.c b/init/init_task.c
+--- a/init/init_task.c 2019-06-25 04:34:56.000000000 +0100
++++ b/init/init_task.c 2019-07-07 09:17:41.251241479 +0100
+@@ -68,9 +68,17 @@
+ .stack = init_stack,
+ .usage = REFCOUNT_INIT(2),
+ .flags = PF_KTHREAD,
++#ifdef CONFIG_SCHED_MUQSS
++ .prio = NORMAL_PRIO,
++ .static_prio = MAX_PRIO-20,
++ .normal_prio = NORMAL_PRIO,
++ .deadline = 0,
++ .time_slice = 1000000,
++#else
+ .prio = MAX_PRIO - 20,
+ .static_prio = MAX_PRIO - 20,
+ .normal_prio = MAX_PRIO - 20,
++#endif
+ .policy = SCHED_NORMAL,
+ .cpus_allowed = CPU_MASK_ALL,
+ .nr_cpus_allowed= NR_CPUS,
+@@ -79,6 +87,7 @@
+ .restart_block = {
+ .fn = do_no_restart_syscall,
+ },
++#ifndef CONFIG_SCHED_MUQSS
+ .se = {
+ .group_node = LIST_HEAD_INIT(init_task.se.group_node),
+ },
+@@ -86,6 +95,7 @@
+ .run_list = LIST_HEAD_INIT(init_task.rt.run_list),
+ .time_slice = RR_TIMESLICE,
+ },
++#endif
+ .tasks = LIST_HEAD_INIT(init_task.tasks),
+ #ifdef CONFIG_SMP
+ .pushable_tasks = PLIST_NODE_INIT(init_task.pushable_tasks, MAX_PRIO),
+diff -Nur a/init/Kconfig b/init/Kconfig
+--- a/init/Kconfig 2019-07-07 09:08:19.142348283 +0100
++++ b/init/Kconfig 2019-07-07 09:17:41.251241479 +0100
+@@ -64,6 +64,18 @@
+
+ menu "General setup"
+
++config SCHED_MUQSS
++ bool "MuQSS cpu scheduler"
++ select HIGH_RES_TIMERS
++ ---help---
++ The Multiple Queue Skiplist Scheduler for excellent interactivity and
++ responsiveness on the desktop and highly scalable deterministic
++ low latency on any hardware.
++
++ Say Y here.
++ default y
++
++
+ config BROKEN
+ bool
+
+@@ -703,6 +715,7 @@
+ depends on ARCH_SUPPORTS_NUMA_BALANCING
+ depends on !ARCH_WANT_NUMA_VARIABLE_LOCALITY
+ depends on SMP && NUMA && MIGRATION
++ depends on !SCHED_MUQSS
+ help
+ This option adds support for automatic NUMA aware memory/task placement.
+ The mechanism is quite primitive and is based on migrating memory when
+@@ -810,9 +823,13 @@
+ help
+ This feature lets CPU scheduler recognize task groups and control CPU
+ bandwidth allocation to such task groups. It uses cgroups to group
+- tasks.
++ tasks. In combination with MuQSS this is purely a STUB to create the
++ files associated with the CPU controller cgroup but most of the
++ controls do nothing. This is useful for working in environments and
++ with applications that will only work if this control group is
++ present.
+
+-if CGROUP_SCHED
++if CGROUP_SCHED && !SCHED_MUQSS
+ config FAIR_GROUP_SCHED
+ bool "Group scheduling for SCHED_OTHER"
+ depends on CGROUP_SCHED
+@@ -919,6 +936,7 @@
+
+ config CGROUP_CPUACCT
+ bool "Simple CPU accounting controller"
++ depends on !SCHED_MUQSS
+ help
+ Provides a simple controller for monitoring the
+ total CPU consumed by the tasks in a cgroup.
+@@ -1037,6 +1055,7 @@
+
+ config SCHED_AUTOGROUP
+ bool "Automatic process group scheduling"
++ depends on !SCHED_MUQSS
+ select CGROUPS
+ select CGROUP_SCHED
+ select FAIR_GROUP_SCHED
+diff -Nur a/init/main.c b/init/main.c
+--- a/init/main.c 2019-06-25 04:34:56.000000000 +0100
++++ b/init/main.c 2019-07-07 09:17:41.251241479 +0100
+@@ -1083,6 +1083,8 @@
+
+ rcu_end_inkernel_boot();
+
++ print_scheduler_version();
++
+ if (ramdisk_execute_command) {
+ ret = run_init_process(ramdisk_execute_command);
+ if (!ret)
+diff -Nur a/kernel/delayacct.c b/kernel/delayacct.c
+--- a/kernel/delayacct.c 2019-06-25 04:34:56.000000000 +0100
++++ b/kernel/delayacct.c 2019-07-07 09:17:41.251241479 +0100
+@@ -115,7 +115,7 @@
+ */
+ t1 = tsk->sched_info.pcount;
+ t2 = tsk->sched_info.run_delay;
+- t3 = tsk->se.sum_exec_runtime;
++ t3 = tsk_seruntime(tsk);
+
+ d->cpu_count += t1;
+
+diff -Nur a/kernel/exit.c b/kernel/exit.c
+--- a/kernel/exit.c 2019-06-25 04:34:56.000000000 +0100
++++ b/kernel/exit.c 2019-07-07 09:17:41.251241479 +0100
+@@ -130,7 +130,7 @@
+ sig->curr_target = next_thread(tsk);
+ }
+
+- add_device_randomness((const void*) &tsk->se.sum_exec_runtime,
++ add_device_randomness((const void*) &tsk_seruntime(tsk),
+ sizeof(unsigned long long));
+
+ /*
+@@ -151,7 +151,7 @@
+ sig->inblock += task_io_get_inblock(tsk);
+ sig->oublock += task_io_get_oublock(tsk);
+ task_io_accounting_add(&sig->ioac, &tsk->ioac);
+- sig->sum_sched_runtime += tsk->se.sum_exec_runtime;
++ sig->sum_sched_runtime += tsk_seruntime(tsk);
+ sig->nr_threads--;
+ __unhash_process(tsk, group_dead);
+ write_sequnlock(&sig->stats_lock);
+diff -Nur a/kernel/Kconfig.MuQSS b/kernel/Kconfig.MuQSS
+--- a/kernel/Kconfig.MuQSS 1970-01-01 01:00:00.000000000 +0100
++++ b/kernel/Kconfig.MuQSS 2019-07-07 09:17:41.251241479 +0100
+@@ -0,0 +1,89 @@
++choice
++ prompt "CPU scheduler runqueue sharing"
++ default RQ_MC if SCHED_MUQSS
++ default RQ_NONE
++
++config RQ_NONE
++ bool "No sharing"
++ help
++ This is the default behaviour where the CPU scheduler has one runqueue
++ per CPU, whether it is a physical or logical CPU (hyperthread).
++
++ This can still be enabled runtime with the boot parameter
++ rqshare=none
++
++ If unsure, say N.
++
++config RQ_SMT
++ bool "SMT (hyperthread) siblings"
++ depends on SCHED_SMT && SCHED_MUQSS
++
++ help
++ With this option enabled, the CPU scheduler will have one runqueue
++ shared by SMT (hyperthread) siblings. As these logical cores share
++ one physical core, sharing the runqueue resource can lead to decreased
++ overhead, lower latency and higher throughput.
++
++ This can still be enabled runtime with the boot parameter
++ rqshare=smt
++
++ If unsure, say N.
++
++config RQ_MC
++ bool "Multicore siblings"
++ depends on SCHED_MC && SCHED_MUQSS
++ help
++ With this option enabled, the CPU scheduler will have one runqueue
++ shared by multicore siblings in addition to any SMT siblings.
++ As these physical cores share caches, sharing the runqueue resource
++ will lead to lower latency, but its effects on overhead and throughput
++ are less predictable. As a general rule, 6 or fewer cores will likely
++ benefit from this, while larger CPUs will only derive a latency
++ benefit. If your workloads are primarily single threaded, this will
++ possibly worsen throughput. If you are only concerned about latency
++ then enable this regardless of how many cores you have.
++
++ This can still be enabled runtime with the boot parameter
++ rqshare=mc
++
++ If unsure, say Y.
++
++config RQ_SMP
++ bool "Symmetric Multi-Processing"
++ depends on SMP && SCHED_MUQSS
++ help
++ With this option enabled, the CPU scheduler will have one runqueue
++ shared by all physical CPUs unless they are on separate NUMA nodes.
++ As physical CPUs usually do not share resources, sharing the runqueue
++ will normally worsen throughput but improve latency. If you only
++ care about latency enable this.
++
++ This can still be enabled runtime with the boot parameter
++ rqshare=smp
++
++ If unsure, say N.
++
++config RQ_ALL
++ bool "NUMA"
++ depends on SMP && SCHED_MUQSS
++ help
++ With this option enabled, the CPU scheduler will have one runqueue
++ regardless of the architecture configuration, including across NUMA
++ nodes. This can substantially decrease throughput in NUMA
++ configurations, but light NUMA designs will not be dramatically
++ affected. This option should only be chosen if latency is the prime
++ concern.
++
++ This can still be enabled runtime with the boot parameter
++ rqshare=all
++
++ If unsure, say N.
++endchoice
++
++config SHARERQ
++ int
++ default 0 if RQ_NONE
++ default 1 if RQ_SMT
++ default 2 if RQ_MC
++ default 3 if RQ_SMP
++ default 4 if RQ_ALL
+diff -Nur a/kernel/kthread.c b/kernel/kthread.c
+--- a/kernel/kthread.c 2019-06-25 04:34:56.000000000 +0100
++++ b/kernel/kthread.c 2019-07-07 09:17:41.261241813 +0100
+@@ -431,6 +431,34 @@
+ }
+ EXPORT_SYMBOL(kthread_bind);
+
++#if defined(CONFIG_SCHED_MUQSS) && defined(CONFIG_SMP)
++extern void __do_set_cpus_allowed(struct task_struct *p, const struct cpumask *new_mask);
++
++/*
++ * new_kthread_bind is a special variant of __kthread_bind_mask.
++ * For new threads to work on muqss we want to call do_set_cpus_allowed
++ * without the task_cpu being set and the task rescheduled until they're
++ * rescheduled on their own so we call __do_set_cpus_allowed directly which
++ * only changes the cpumask. This is particularly important for smpboot threads
++ * to work.
++ */
++static void new_kthread_bind(struct task_struct *p, unsigned int cpu)
++{
++ unsigned long flags;
++
++ if (WARN_ON(!wait_task_inactive(p, TASK_UNINTERRUPTIBLE)))
++ return;
++
++ /* It's safe because the task is inactive. */
++ raw_spin_lock_irqsave(&p->pi_lock, flags);
++ __do_set_cpus_allowed(p, cpumask_of(cpu));
++ p->flags |= PF_NO_SETAFFINITY;
++ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
++}
++#else
++#define new_kthread_bind(p, cpu) kthread_bind(p, cpu)
++#endif
++
+ /**
+ * kthread_create_on_cpu - Create a cpu bound kthread
+ * @threadfn: the function to run until signal_pending(current).
+@@ -452,7 +480,7 @@
+ cpu);
+ if (IS_ERR(p))
+ return p;
+- kthread_bind(p, cpu);
++ new_kthread_bind(p, cpu);
+ /* CPU hotplug need to bind once again when unparking the thread. */
+ set_bit(KTHREAD_IS_PER_CPU, &to_kthread(p)->flags);
+ to_kthread(p)->cpu = cpu;
+diff -Nur a/kernel/livepatch/transition.c b/kernel/livepatch/transition.c
+--- a/kernel/livepatch/transition.c 2019-06-25 04:34:56.000000000 +0100
++++ b/kernel/livepatch/transition.c 2019-07-07 09:17:41.261241813 +0100
+@@ -298,7 +298,7 @@
+ static bool klp_try_switch_task(struct task_struct *task)
+ {
+ struct rq *rq;
+- struct rq_flags flags;
++ struct rq_flags rf;
+ int ret;
+ bool success = false;
+ char err_buf[STACK_ERR_BUF_SIZE];
+@@ -314,7 +314,7 @@
+ * functions. If all goes well, switch the task to the target patch
+ * state.
+ */
+- rq = task_rq_lock(task, &flags);
++ rq = task_rq_lock(task, &rf);
+
+ if (task_running(rq, task) && task != current) {
+ snprintf(err_buf, STACK_ERR_BUF_SIZE,
+@@ -333,7 +333,7 @@
+ task->patch_state = klp_target_state;
+
+ done:
+- task_rq_unlock(rq, task, &flags);
++ task_rq_unlock(rq, task, &rf);
+
+ /*
+ * Due to console deadlock issues, pr_debug() can't be used while
+diff -Nur a/kernel/Makefile b/kernel/Makefile
+--- a/kernel/Makefile 2019-06-25 04:34:56.000000000 +0100
++++ b/kernel/Makefile 2019-07-07 09:17:41.251241479 +0100
+@@ -10,7 +10,7 @@
+ extable.o params.o \
+ kthread.o sys_ni.o nsproxy.o \
+ notifier.o ksysfs.o cred.o reboot.o \
+- async.o range.o smpboot.o ucount.o
++ async.o range.o smpboot.o ucount.o skip_list.o
+
+ obj-$(CONFIG_MODULES) += kmod.o
+ obj-$(CONFIG_MULTIUSER) += groups.o
+diff -Nur a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
+--- a/kernel/sched/cpufreq_schedutil.c 2019-06-25 04:34:56.000000000 +0100
++++ b/kernel/sched/cpufreq_schedutil.c 2019-07-07 09:17:41.261241813 +0100
+@@ -175,6 +175,12 @@
+ return cpufreq_driver_resolve_freq(policy, freq);
+ }
+
++#ifdef CONFIG_SCHED_MUQSS
++#define rt_rq_runnable(rq_rt) rt_rq_is_runnable(rq)
++#else
++#define rt_rq_runnable(rq_rt) rt_rq_is_runnable(&rq->rt)
++#endif
++
+ /*
+ * This function computes an effective utilization for the given CPU, to be
+ * used for frequency selection given the linear relation: f = u * f_max.
+@@ -201,7 +207,7 @@
+ unsigned long dl_util, util, irq;
+ struct rq *rq = cpu_rq(cpu);
+
+- if (type == FREQUENCY_UTIL && rt_rq_is_runnable(&rq->rt))
++ if (type == FREQUENCY_UTIL && rt_rq_runnable(rq))
+ return max;
+
+ /*
+@@ -635,7 +641,11 @@
+ struct task_struct *thread;
+ struct sched_attr attr = {
+ .size = sizeof(struct sched_attr),
++#ifdef CONFIG_SCHED_MUQSS
++ .sched_policy = SCHED_RR,
++#else
+ .sched_policy = SCHED_DEADLINE,
++#endif
+ .sched_flags = SCHED_FLAG_SUGOV,
+ .sched_nice = 0,
+ .sched_priority = 0,
+diff -Nur a/kernel/sched/cpupri.h b/kernel/sched/cpupri.h
+--- a/kernel/sched/cpupri.h 2019-06-25 04:34:56.000000000 +0100
++++ b/kernel/sched/cpupri.h 2019-07-07 09:17:41.261241813 +0100
+@@ -17,9 +17,11 @@
+ int *cpu_to_pri;
+ };
+
++#ifndef CONFIG_SCHED_MUQSS
+ #ifdef CONFIG_SMP
+ int cpupri_find(struct cpupri *cp, struct task_struct *p, struct cpumask *lowest_mask);
+ void cpupri_set(struct cpupri *cp, int cpu, int pri);
+ int cpupri_init(struct cpupri *cp);
+ void cpupri_cleanup(struct cpupri *cp);
+ #endif
++#endif
+diff -Nur a/kernel/sched/cputime.c b/kernel/sched/cputime.c
+--- a/kernel/sched/cputime.c 2019-06-25 04:34:56.000000000 +0100
++++ b/kernel/sched/cputime.c 2019-07-07 09:17:41.261241813 +0100
+@@ -265,26 +265,6 @@
+ return accounted;
+ }
+
+-#ifdef CONFIG_64BIT
+-static inline u64 read_sum_exec_runtime(struct task_struct *t)
+-{
+- return t->se.sum_exec_runtime;
+-}
+-#else
+-static u64 read_sum_exec_runtime(struct task_struct *t)
+-{
+- u64 ns;
+- struct rq_flags rf;
+- struct rq *rq;
+-
+- rq = task_rq_lock(t, &rf);
+- ns = t->se.sum_exec_runtime;
+- task_rq_unlock(rq, t, &rf);
+-
+- return ns;
+-}
+-#endif
+-
+ /*
+ * Accumulate raw cputime values of dead tasks (sig->[us]time) and live
+ * tasks (sum on group iteration) belonging to @tsk's group.
+@@ -662,7 +642,7 @@
+ void task_cputime_adjusted(struct task_struct *p, u64 *ut, u64 *st)
+ {
+ struct task_cputime cputime = {
+- .sum_exec_runtime = p->se.sum_exec_runtime,
++ .sum_exec_runtime = tsk_seruntime(p),
+ };
+
+ task_cputime(p, &cputime.utime, &cputime.stime);
+diff -Nur a/kernel/sched/idle.c b/kernel/sched/idle.c
+--- a/kernel/sched/idle.c 2019-06-25 04:34:56.000000000 +0100
++++ b/kernel/sched/idle.c 2019-07-07 09:17:41.261241813 +0100
+@@ -224,6 +224,8 @@
+ static void do_idle(void)
+ {
+ int cpu = smp_processor_id();
++ bool pending = false;
++
+ /*
+ * If the arch has a polling bit, we maintain an invariant:
+ *
+@@ -234,7 +236,10 @@
+ */
+
+ __current_set_polling();
+- tick_nohz_idle_enter();
++ if (unlikely(softirq_pending(cpu)))
++ pending = true;
++ else
++ tick_nohz_idle_enter();
+
+ while (!need_resched()) {
+ check_pgt_cache();
+@@ -272,7 +277,8 @@
+ * an IPI to fold the state for us.
+ */
+ preempt_set_need_resched();
+- tick_nohz_idle_exit();
++ if (!pending)
++ tick_nohz_idle_exit();
+ __current_clr_polling();
+
+ /*
+@@ -353,6 +359,7 @@
+ do_idle();
+ }
+
++#ifndef CONFIG_SCHED_MUQSS
+ /*
+ * idle-task scheduling class.
+ */
+@@ -465,3 +472,4 @@
+ .switched_to = switched_to_idle,
+ .update_curr = update_curr_idle,
+ };
++#endif /* CONFIG_SCHED_MUQSS */
+diff -Nur a/kernel/sched/Makefile b/kernel/sched/Makefile
+--- a/kernel/sched/Makefile 2019-06-25 04:34:56.000000000 +0100
++++ b/kernel/sched/Makefile 2019-07-07 09:17:41.261241813 +0100
+@@ -16,15 +16,23 @@
+ CFLAGS_core.o := $(PROFILING) -fno-omit-frame-pointer
+ endif
+
++ifdef CONFIG_SCHED_MUQSS
++obj-y += MuQSS.o clock.o cputime.o
++obj-y += idle.o
++obj-y += wait.o wait_bit.o swait.o completion.o
++
++obj-$(CONFIG_SMP) += topology.o
++else
+ obj-y += core.o loadavg.o clock.o cputime.o
+ obj-y += idle.o fair.o rt.o deadline.o
+ obj-y += wait.o wait_bit.o swait.o completion.o
+
+ obj-$(CONFIG_SMP) += cpupri.o cpudeadline.o topology.o stop_task.o pelt.o
+ obj-$(CONFIG_SCHED_AUTOGROUP) += autogroup.o
+-obj-$(CONFIG_SCHEDSTATS) += stats.o
+ obj-$(CONFIG_SCHED_DEBUG) += debug.o
+ obj-$(CONFIG_CGROUP_CPUACCT) += cpuacct.o
++endif
++obj-$(CONFIG_SCHEDSTATS) += stats.o
+ obj-$(CONFIG_CPU_FREQ) += cpufreq.o
+ obj-$(CONFIG_CPU_FREQ_GOV_SCHEDUTIL) += cpufreq_schedutil.o
+ obj-$(CONFIG_MEMBARRIER) += membarrier.o
+diff -Nur a/kernel/sched/MuQSS.c b/kernel/sched/MuQSS.c
+--- a/kernel/sched/MuQSS.c 1970-01-01 01:00:00.000000000 +0100
++++ b/kernel/sched/MuQSS.c 2019-07-07 09:17:41.261241813 +0100
+@@ -0,0 +1,7496 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * kernel/sched/MuQSS.c, was kernel/sched.c
++ *
++ * Kernel scheduler and related syscalls
++ *
++ * Copyright (C) 1991-2002 Linus Torvalds
++ *
++ * 1996-12-23 Modified by Dave Grothe to fix bugs in semaphores and
++ * make semaphores SMP safe
++ * 1998-11-19 Implemented schedule_timeout() and related stuff
++ * by Andrea Arcangeli
++ * 2002-01-04 New ultra-scalable O(1) scheduler by Ingo Molnar:
++ * hybrid priority-list and round-robin design with
++ * an array-switch method of distributing timeslices
++ * and per-CPU runqueues. Cleanups and useful suggestions
++ * by Davide Libenzi, preemptible kernel bits by Robert Love.
++ * 2003-09-03 Interactivity tuning by Con Kolivas.
++ * 2004-04-02 Scheduler domains code by Nick Piggin
++ * 2007-04-15 Work begun on replacing all interactivity tuning with a
++ * fair scheduling design by Con Kolivas.
++ * 2007-05-05 Load balancing (smp-nice) and other improvements
++ * by Peter Williams
++ * 2007-05-06 Interactivity improvements to CFS by Mike Galbraith
++ * 2007-07-01 Group scheduling enhancements by Srivatsa Vaddagiri
++ * 2007-11-29 RT balancing improvements by Steven Rostedt, Gregory Haskins,
++ * Thomas Gleixner, Mike Kravetz
++ * 2009-08-13 Brainfuck deadline scheduling policy by Con Kolivas deletes
++ * a whole lot of those previous things.
++ * 2016-10-01 Multiple Queue Skiplist Scheduler scalable evolution of BFS
++ * scheduler by Con Kolivas.
++ */
++
++#include <linux/sched/isolation.h>
++#include <linux/sched/loadavg.h>
++
++#include <linux/binfmts.h>
++#include <linux/blkdev.h>
++#include <linux/compat.h>
++#include <linux/context_tracking.h>
++#include <linux/cpuset.h>
++#include <linux/delayacct.h>
++#include <linux/init_task.h>
++#include <linux/kcov.h>
++#include <linux/kprobes.h>
++#include <linux/mmu_context.h>
++#include <linux/module.h>
++#include <linux/nmi.h>
++#include <linux/prefetch.h>
++#include <linux/profile.h>
++#include <linux/rcupdate_wait.h>
++#include <linux/sched.h>
++#include <linux/security.h>
++#include <linux/skip_list.h>
++#include <linux/syscalls.h>
++#include <linux/tick.h>
++#include <linux/wait_bit.h>
++
++#include <asm/irq_regs.h>
++#include <asm/switch_to.h>
++#include <asm/tlb.h>
++
++#include "../workqueue_internal.h"
++#include "../smpboot.h"
++
++#define CREATE_TRACE_POINTS
++#include <trace/events/sched.h>
++
++#include "MuQSS.h"
++
++#define rt_prio(prio) unlikely((prio) < MAX_RT_PRIO)
++#define rt_task(p) rt_prio((p)->prio)
++#define batch_task(p) (unlikely((p)->policy == SCHED_BATCH))
++#define is_rt_policy(policy) ((policy) == SCHED_FIFO || \
++ (policy) == SCHED_RR)
++#define has_rt_policy(p) unlikely(is_rt_policy((p)->policy))
++
++#define is_idle_policy(policy) ((policy) == SCHED_IDLEPRIO)
++#define idleprio_task(p) unlikely(is_idle_policy((p)->policy))
++#define task_running_idle(p) unlikely((p)->prio == IDLE_PRIO)
++
++#define is_iso_policy(policy) ((policy) == SCHED_ISO)
++#define iso_task(p) unlikely(is_iso_policy((p)->policy))
++#define task_running_iso(p) unlikely((p)->prio == ISO_PRIO)
++
++#define rq_idle(rq) ((rq)->rq_prio == PRIO_LIMIT)
++
++#define ISO_PERIOD (5 * HZ)
++
++#define STOP_PRIO (MAX_RT_PRIO - 1)
++
++/*
++ * Some helpers for converting to/from various scales. Use shifts to get
++ * approximate multiples of ten for less overhead.
++ */
++#define APPROX_NS_PS (1073741824) /* Approximate ns per second */
++#define JIFFIES_TO_NS(TIME) ((TIME) * (APPROX_NS_PS / HZ))
++#define JIFFY_NS (APPROX_NS_PS / HZ)
++#define JIFFY_US (1048576 / HZ)
++#define NS_TO_JIFFIES(TIME) ((TIME) / JIFFY_NS)
++#define HALF_JIFFY_NS (APPROX_NS_PS / HZ / 2)
++#define HALF_JIFFY_US (1048576 / HZ / 2)
++#define MS_TO_NS(TIME) ((TIME) << 20)
++#define MS_TO_US(TIME) ((TIME) << 10)
++#define NS_TO_MS(TIME) ((TIME) >> 20)
++#define NS_TO_US(TIME) ((TIME) >> 10)
++#define US_TO_NS(TIME) ((TIME) << 10)
++#define TICK_APPROX_NS ((APPROX_NS_PS+HZ/2)/HZ)
++
++#define RESCHED_US (100) /* Reschedule if less than this many μs left */
++
++void print_scheduler_version(void)
++{
++ printk(KERN_INFO "MuQSS CPU scheduler v0.192 by Con Kolivas.\n");
++}
++
++#define RQSHARE_NONE 0
++#define RQSHARE_SMT 1
++#define RQSHARE_MC 2
++#define RQSHARE_SMP 3
++#define RQSHARE_ALL 4
++
++/*
++ * This determines what level of runqueue sharing will be done and is
++ * configurable at boot time with the bootparam rqshare =
++ */
++static int rqshare __read_mostly = CONFIG_SHARERQ; /* Default RQSHARE_MC */
++
++static int __init set_rqshare(char *str)
++{
++ if (!strncmp(str, "none", 4)) {
++ rqshare = RQSHARE_NONE;
++ return 0;
++ }
++ if (!strncmp(str, "smt", 3)) {
++ rqshare = RQSHARE_SMT;
++ return 0;
++ }
++ if (!strncmp(str, "mc", 2)) {
++ rqshare = RQSHARE_MC;
++ return 0;
++ }
++ if (!strncmp(str, "smp", 3)) {
++ rqshare = RQSHARE_SMP;
++ return 0;
++ }
++ if (!strncmp(str, "all", 3)) {
++ rqshare = RQSHARE_ALL;
++ return 0;
++ }
++ return 1;
++}
++__setup("rqshare=", set_rqshare);
++
++/*
++ * This is the time all tasks within the same priority round robin.
++ * Value is in ms and set to a minimum of 6ms.
++ * Tunable via /proc interface.
++ */
++int rr_interval __read_mostly = 6;
++
++/*
++ * Tunable to choose whether to prioritise latency or throughput, simple
++ * binary yes or no
++ */
++int sched_interactive __read_mostly = 1;
++
++/*
++ * sched_iso_cpu - sysctl which determines the cpu percentage SCHED_ISO tasks
++ * are allowed to run five seconds as real time tasks. This is the total over
++ * all online cpus.
++ */
++int sched_iso_cpu __read_mostly = 70;
++
++/*
++ * sched_yield_type - Choose what sort of yield sched_yield will perform.
++ * 0: No yield.
++ * 1: Yield only to better priority/deadline tasks. (default)
++ * 2: Expire timeslice and recalculate deadline.
++ */
++int sched_yield_type __read_mostly = 1;
++
++/*
++ * The relative length of deadline for each priority(nice) level.
++ */
++static int prio_ratios[NICE_WIDTH] __read_mostly;
++
++
++/*
++ * The quota handed out to tasks of all priority levels when refilling their
++ * time_slice.
++ */
++static inline int timeslice(void)
++{
++ return MS_TO_US(rr_interval);
++}
++
++DEFINE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
++
++#ifdef CONFIG_SMP
++/*
++ * Total number of runqueues. Equals number of CPUs when there is no runqueue
++ * sharing but is usually less with SMT/MC sharing of runqueues.
++ */
++static int total_runqueues __read_mostly = 1;
++
++static cpumask_t cpu_idle_map ____cacheline_aligned_in_smp;
++
++struct rq *cpu_rq(int cpu)
++{
++ return &per_cpu(runqueues, (cpu));
++}
++#define cpu_curr(cpu) (cpu_rq(cpu)->curr)
++
++/*
++ * For asym packing, by default the lower numbered cpu has higher priority.
++ */
++int __weak arch_asym_cpu_priority(int cpu)
++{
++ return -cpu;
++}
++
++int __weak arch_sd_sibling_asym_packing(void)
++{
++ return 0*SD_ASYM_PACKING;
++}
++
++#ifdef CONFIG_SCHED_SMT
++DEFINE_STATIC_KEY_FALSE(sched_smt_present);
++EXPORT_SYMBOL_GPL(sched_smt_present);
++#endif
++
++#else
++struct rq *uprq;
++#endif /* CONFIG_SMP */
++
++#include "stats.h"
++
++/*
++ * All common locking functions performed on rq->lock. rq->clock is local to
++ * the CPU accessing it so it can be modified just with interrupts disabled
++ * when we're not updating niffies.
++ * Looking up task_rq must be done under rq->lock to be safe.
++ */
++
++/*
++ * RQ-clock updating methods:
++ */
++
++#ifdef HAVE_SCHED_AVG_IRQ
++static void update_irq_load_avg(struct rq *rq, long delta);
++#else
++static inline void update_irq_load_avg(struct rq *rq, long delta) {}
++#endif
++
++static void update_rq_clock_task(struct rq *rq, s64 delta)
++{
++/*
++ * In theory, the compile should just see 0 here, and optimize out the call
++ * to sched_rt_avg_update. But I don't trust it...
++ */
++ s64 __maybe_unused steal = 0, irq_delta = 0;
++#ifdef CONFIG_IRQ_TIME_ACCOUNTING
++ irq_delta = irq_time_read(cpu_of(rq)) - rq->prev_irq_time;
++
++ /*
++ * Since irq_time is only updated on {soft,}irq_exit, we might run into
++ * this case when a previous update_rq_clock() happened inside a
++ * {soft,}irq region.
++ *
++ * When this happens, we stop ->clock_task and only update the
++ * prev_irq_time stamp to account for the part that fit, so that a next
++ * update will consume the rest. This ensures ->clock_task is
++ * monotonic.
++ *
++ * It does however cause some slight miss-attribution of {soft,}irq
++ * time, a more accurate solution would be to update the irq_time using
++ * the current rq->clock timestamp, except that would require using
++ * atomic ops.
++ */
++ if (irq_delta > delta)
++ irq_delta = delta;
++
++ rq->prev_irq_time += irq_delta;
++ delta -= irq_delta;
++#endif
++#ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING
++ if (static_key_false((&paravirt_steal_rq_enabled))) {
++ steal = paravirt_steal_clock(cpu_of(rq));
++ steal -= rq->prev_steal_time_rq;
++
++ if (unlikely(steal > delta))
++ steal = delta;
++
++ rq->prev_steal_time_rq += steal;
++ delta -= steal;
++ }
++#endif
++ rq->clock_task += delta;
++
++#ifdef CONFIG_HAVE_SCHED_AVG_IRQ
++ if (irq_delta + steal)
++ update_irq_load_avg(rq, irq_delta + steal);
++#endif
++}
++
++static inline void update_rq_clock(struct rq *rq)
++{
++ s64 delta = sched_clock_cpu(cpu_of(rq)) - rq->clock;
++
++ if (unlikely(delta < 0))
++ return;
++ rq->clock += delta;
++ update_rq_clock_task(rq, delta);
++}
++
++/*
++ * Niffies are a globally increasing nanosecond counter. They're only used by
++ * update_load_avg and time_slice_expired, however deadlines are based on them
++ * across CPUs. Update them whenever we will call one of those functions, and
++ * synchronise them across CPUs whenever we hold both runqueue locks.
++ */
++static inline void update_clocks(struct rq *rq)
++{
++ s64 ndiff, minndiff;
++ long jdiff;
++
++ update_rq_clock(rq);
++ ndiff = rq->clock - rq->old_clock;
++ rq->old_clock = rq->clock;
++ jdiff = jiffies - rq->last_jiffy;
++
++ /* Subtract any niffies added by balancing with other rqs */
++ ndiff -= rq->niffies - rq->last_niffy;
++ minndiff = JIFFIES_TO_NS(jdiff) - rq->niffies + rq->last_jiffy_niffies;
++ if (minndiff < 0)
++ minndiff = 0;
++ ndiff = max(ndiff, minndiff);
++ rq->niffies += ndiff;
++ rq->last_niffy = rq->niffies;
++ if (jdiff) {
++ rq->last_jiffy += jdiff;
++ rq->last_jiffy_niffies = rq->niffies;
++ }
++}
++
++/*
++ * Any time we have two runqueues locked we use that as an opportunity to
++ * synchronise niffies to the highest value as idle ticks may have artificially
++ * kept niffies low on one CPU and the truth can only be later.
++ */
++static inline void synchronise_niffies(struct rq *rq1, struct rq *rq2)
++{
++ if (rq1->niffies > rq2->niffies)
++ rq2->niffies = rq1->niffies;
++ else
++ rq1->niffies = rq2->niffies;
++}
++
++/*
++ * double_rq_lock - safely lock two runqueues
++ *
++ * Note this does not disable interrupts like task_rq_lock,
++ * you need to do so manually before calling.
++ */
++
++/* For when we know rq1 != rq2 */
++static inline void __double_rq_lock(struct rq *rq1, struct rq *rq2)
++ __acquires(rq1->lock)
++ __acquires(rq2->lock)
++{
++ if (rq1 < rq2) {
++ raw_spin_lock(rq1->lock);
++ raw_spin_lock_nested(rq2->lock, SINGLE_DEPTH_NESTING);
++ } else {
++ raw_spin_lock(rq2->lock);
++ raw_spin_lock_nested(rq1->lock, SINGLE_DEPTH_NESTING);
++ }
++}
++
++static inline void double_rq_lock(struct rq *rq1, struct rq *rq2)
++ __acquires(rq1->lock)
++ __acquires(rq2->lock)
++{
++ BUG_ON(!irqs_disabled());
++ if (rq1->lock == rq2->lock) {
++ raw_spin_lock(rq1->lock);
++ __acquire(rq2->lock); /* Fake it out ;) */
++ } else
++ __double_rq_lock(rq1, rq2);
++ synchronise_niffies(rq1, rq2);
++}
++
++/*
++ * double_rq_unlock - safely unlock two runqueues
++ *
++ * Note this does not restore interrupts like task_rq_unlock,
++ * you need to do so manually after calling.
++ */
++static inline void double_rq_unlock(struct rq *rq1, struct rq *rq2)
++ __releases(rq1->lock)
++ __releases(rq2->lock)
++{
++ raw_spin_unlock(rq1->lock);
++ if (rq1->lock != rq2->lock)
++ raw_spin_unlock(rq2->lock);
++ else
++ __release(rq2->lock);
++}
++
++static inline void lock_all_rqs(void)
++{
++ int cpu;
++
++ preempt_disable();
++ for_each_possible_cpu(cpu) {
++ struct rq *rq = cpu_rq(cpu);
++
++ do_raw_spin_lock(rq->lock);
++ }
++}
++
++static inline void unlock_all_rqs(void)
++{
++ int cpu;
++
++ for_each_possible_cpu(cpu) {
++ struct rq *rq = cpu_rq(cpu);
++
++ do_raw_spin_unlock(rq->lock);
++ }
++ preempt_enable();
++}
++
++/* Specially nest trylock an rq */
++static inline bool trylock_rq(struct rq *this_rq, struct rq *rq)
++{
++ if (unlikely(!do_raw_spin_trylock(rq->lock)))
++ return false;
++ spin_acquire(&rq->lock->dep_map, SINGLE_DEPTH_NESTING, 1, _RET_IP_);
++ synchronise_niffies(this_rq, rq);
++ return true;
++}
++
++/* Unlock a specially nested trylocked rq */
++static inline void unlock_rq(struct rq *rq)
++{
++ spin_release(&rq->lock->dep_map, 1, _RET_IP_);
++ do_raw_spin_unlock(rq->lock);
++}
++
++/*
++ * cmpxchg based fetch_or, macro so it works for different integer types
++ */
++#define fetch_or(ptr, mask) \
++ ({ \
++ typeof(ptr) _ptr = (ptr); \
++ typeof(mask) _mask = (mask); \
++ typeof(*_ptr) _old, _val = *_ptr; \
++ \
++ for (;;) { \
++ _old = cmpxchg(_ptr, _val, _val | _mask); \
++ if (_old == _val) \
++ break; \
++ _val = _old; \
++ } \
++ _old; \
++})
++
++#if defined(CONFIG_SMP) && defined(TIF_POLLING_NRFLAG)
++/*
++ * Atomically set TIF_NEED_RESCHED and test for TIF_POLLING_NRFLAG,
++ * this avoids any races wrt polling state changes and thereby avoids
++ * spurious IPIs.
++ */
++static bool set_nr_and_not_polling(struct task_struct *p)
++{
++ struct thread_info *ti = task_thread_info(p);
++ return !(fetch_or(&ti->flags, _TIF_NEED_RESCHED) & _TIF_POLLING_NRFLAG);
++}
++
++/*
++ * Atomically set TIF_NEED_RESCHED if TIF_POLLING_NRFLAG is set.
++ *
++ * If this returns true, then the idle task promises to call
++ * sched_ttwu_pending() and reschedule soon.
++ */
++static bool set_nr_if_polling(struct task_struct *p)
++{
++ struct thread_info *ti = task_thread_info(p);
++ typeof(ti->flags) old, val = READ_ONCE(ti->flags);
++
++ for (;;) {
++ if (!(val & _TIF_POLLING_NRFLAG))
++ return false;
++ if (val & _TIF_NEED_RESCHED)
++ return true;
++ old = cmpxchg(&ti->flags, val, val | _TIF_NEED_RESCHED);
++ if (old == val)
++ break;
++ val = old;
++ }
++ return true;
++}
++
++#else
++static bool set_nr_and_not_polling(struct task_struct *p)
++{
++ set_tsk_need_resched(p);
++ return true;
++}
++
++#ifdef CONFIG_SMP
++static bool set_nr_if_polling(struct task_struct *p)
++{
++ return false;
++}
++#endif
++#endif
++
++static bool __wake_q_add(struct wake_q_head *head, struct task_struct *task)
++{
++ struct wake_q_node *node = &task->wake_q;
++
++ /*
++ * Atomically grab the task, if ->wake_q is !nil already it means
++ * its already queued (either by us or someone else) and will get the
++ * wakeup due to that.
++ *
++ * In order to ensure that a pending wakeup will observe our pending
++ * state, even in the failed case, an explicit smp_mb() must be used.
++ */
++ smp_mb__before_atomic();
++ if (unlikely(cmpxchg_relaxed(&node->next, NULL, WAKE_Q_TAIL)))
++ return false;
++
++ /*
++ * The head is context local, there can be no concurrency.
++ */
++ *head->lastp = node;
++ head->lastp = &node->next;
++ return true;
++}
++
++/**
++ * wake_q_add() - queue a wakeup for 'later' waking.
++ * @head: the wake_q_head to add @task to
++ * @task: the task to queue for 'later' wakeup
++ *
++ * Queue a task for later wakeup, most likely by the wake_up_q() call in the
++ * same context, _HOWEVER_ this is not guaranteed, the wakeup can come
++ * instantly.
++ *
++ * This function must be used as-if it were wake_up_process(); IOW the task
++ * must be ready to be woken at this location.
++ */
++void wake_q_add(struct wake_q_head *head, struct task_struct *task)
++{
++ if (__wake_q_add(head, task))
++ get_task_struct(task);
++}
++
++/**
++ * wake_q_add_safe() - safely queue a wakeup for 'later' waking.
++ * @head: the wake_q_head to add @task to
++ * @task: the task to queue for 'later' wakeup
++ *
++ * Queue a task for later wakeup, most likely by the wake_up_q() call in the
++ * same context, _HOWEVER_ this is not guaranteed, the wakeup can come
++ * instantly.
++ *
++ * This function must be used as-if it were wake_up_process(); IOW the task
++ * must be ready to be woken at this location.
++ *
++ * This function is essentially a task-safe equivalent to wake_q_add(). Callers
++ * that already hold reference to @task can call the 'safe' version and trust
++ * wake_q to do the right thing depending whether or not the @task is already
++ * queued for wakeup.
++ */
++void wake_q_add_safe(struct wake_q_head *head, struct task_struct *task)
++{
++ if (!__wake_q_add(head, task))
++ put_task_struct(task);
++}
++
++void wake_up_q(struct wake_q_head *head)
++{
++ struct wake_q_node *node = head->first;
++
++ while (node != WAKE_Q_TAIL) {
++ struct task_struct *task;
++
++ task = container_of(node, struct task_struct, wake_q);
++ BUG_ON(!task);
++ /* Task can safely be re-inserted now */
++ node = node->next;
++ task->wake_q.next = NULL;
++
++ /*
++ * wake_up_process() executes a full barrier, which pairs with
++ * the queueing in wake_q_add() so as not to miss wakeups.
++ */
++ wake_up_process(task);
++ put_task_struct(task);
++ }
++}
++
++static inline void smp_sched_reschedule(int cpu)
++{
++ if (likely(cpu_online(cpu)))
++ smp_send_reschedule(cpu);
++}
++
++/*
++ * resched_task - mark a task 'to be rescheduled now'.
++ *
++ * On UP this means the setting of the need_resched flag, on SMP it
++ * might also involve a cross-CPU call to trigger the scheduler on
++ * the target CPU.
++ */
++void resched_task(struct task_struct *p)
++{
++ int cpu;
++#ifdef CONFIG_LOCKDEP
++ /* Kernel threads call this when creating workqueues while still
++ * inactive from __kthread_bind_mask, holding only the pi_lock */
++ if (!(p->flags & PF_KTHREAD)) {
++ struct rq *rq = task_rq(p);
++
++ lockdep_assert_held(rq->lock);
++ }
++#endif
++ if (test_tsk_need_resched(p))
++ return;
++
++ cpu = task_cpu(p);
++ if (cpu == smp_processor_id()) {
++ set_tsk_need_resched(p);
++ set_preempt_need_resched();
++ return;
++ }
++
++ if (set_nr_and_not_polling(p))
++ smp_sched_reschedule(cpu);
++ else
++ trace_sched_wake_idle_without_ipi(cpu);
++}
++
++/*
++ * A task that is not running or queued will not have a node set.
++ * A task that is queued but not running will have a node set.
++ * A task that is currently running will have ->on_cpu set but no node set.
++ */
++static inline bool task_queued(struct task_struct *p)
++{
++ return !skiplist_node_empty(&p->node);
++}
++
++static void enqueue_task(struct rq *rq, struct task_struct *p, int flags);
++static inline void resched_if_idle(struct rq *rq);
++
++/* Dodgy workaround till we figure out where the softirqs are going */
++static inline void do_pending_softirq(struct rq *rq, struct task_struct *next)
++{
++ if (unlikely(next == rq->idle && local_softirq_pending() && !in_interrupt()))
++ do_softirq_own_stack();
++}
++
++static inline bool deadline_before(u64 deadline, u64 time)
++{
++ return (deadline < time);
++}
++
++/*
++ * Deadline is "now" in niffies + (offset by priority). Setting the deadline
++ * is the key to everything. It distributes cpu fairly amongst tasks of the
++ * same nice value, it proportions cpu according to nice level, it means the
++ * task that last woke up the longest ago has the earliest deadline, thus
++ * ensuring that interactive tasks get low latency on wake up. The CPU
++ * proportion works out to the square of the virtual deadline difference, so
++ * this equation will give nice 19 3% CPU compared to nice 0.
++ */
++static inline u64 prio_deadline_diff(int user_prio)
++{
++ return (prio_ratios[user_prio] * rr_interval * (MS_TO_NS(1) / 128));
++}
++
++static inline u64 task_deadline_diff(struct task_struct *p)
++{
++ return prio_deadline_diff(TASK_USER_PRIO(p));
++}
++
++static inline u64 static_deadline_diff(int static_prio)
++{
++ return prio_deadline_diff(USER_PRIO(static_prio));
++}
++
++static inline int longest_deadline_diff(void)
++{
++ return prio_deadline_diff(39);
++}
++
++static inline int ms_longest_deadline_diff(void)
++{
++ return NS_TO_MS(longest_deadline_diff());
++}
++
++static inline bool rq_local(struct rq *rq);
++
++#ifndef SCHED_CAPACITY_SCALE
++#define SCHED_CAPACITY_SCALE 1024
++#endif
++
++static inline int rq_load(struct rq *rq)
++{
++ return rq->nr_running;
++}
++
++/*
++ * Update the load average for feeding into cpu frequency governors. Use a
++ * rough estimate of a rolling average with ~ time constant of 32ms.
++ * 80/128 ~ 0.63. * 80 / 32768 / 128 == * 5 / 262144
++ * Make sure a call to update_clocks has been made before calling this to get
++ * an updated rq->niffies.
++ */
++static void update_load_avg(struct rq *rq, unsigned int flags)
++{
++ long us_interval, load;
++ unsigned long curload;
++
++ us_interval = NS_TO_US(rq->niffies - rq->load_update);
++ if (unlikely(us_interval <= 0))
++ return;
++
++ curload = rq_load(rq);
++ load = rq->load_avg - (rq->load_avg * us_interval * 5 / 262144);
++ if (unlikely(load < 0))
++ load = 0;
++ load += curload * curload * SCHED_CAPACITY_SCALE * us_interval * 5 / 262144;
++ rq->load_avg = load;
++
++ rq->load_update = rq->niffies;
++ update_irq_load_avg(rq, 0);
++ if (likely(rq_local(rq)))
++ cpufreq_trigger(rq, flags);
++}
++
++#ifdef HAVE_SCHED_AVG_IRQ
++/*
++ * IRQ variant of update_load_avg below. delta is actually time in nanoseconds
++ * here so we scale curload to how long it's been since the last update.
++ */
++static void update_irq_load_avg(struct rq *rq, long delta)
++{
++ long us_interval, load;
++ unsigned long curload;
++
++ us_interval = NS_TO_US(rq->niffies - rq->irq_load_update);
++ if (unlikely(us_interval <= 0))
++ return;
++
++ curload = NS_TO_US(delta) / us_interval;
++ load = rq->irq_load_avg - (rq->irq_load_avg * us_interval * 5 / 262144);
++ if (unlikely(load < 0))
++ load = 0;
++ load += curload * curload * SCHED_CAPACITY_SCALE * us_interval * 5 / 262144;
++ rq->irq_load_avg = load;
++
++ rq->irq_load_update = rq->niffies;
++}
++#endif
++
++/*
++ * Removing from the runqueue. Enter with rq locked. Deleting a task
++ * from the skip list is done via the stored node reference in the task struct
++ * and does not require a full look up. Thus it occurs in O(k) time where k
++ * is the "level" of the list the task was stored at - usually < 4, max 8.
++ */
++static void dequeue_task(struct rq *rq, struct task_struct *p, int flags)
++{
++ skiplist_delete(rq->sl, &p->node);
++ rq->best_key = rq->node->next[0]->key;
++ update_clocks(rq);
++
++ if (!(flags & DEQUEUE_SAVE)) {
++ sched_info_dequeued(rq, p);
++ psi_dequeue(p, flags & DEQUEUE_SLEEP);
++ }
++ rq->nr_running--;
++ if (rt_task(p))
++ rq->rt_nr_running--;
++ update_load_avg(rq, flags);
++}
++
++#ifdef CONFIG_PREEMPT_RCU
++static bool rcu_read_critical(struct task_struct *p)
++{
++ return p->rcu_read_unlock_special.b.blocked;
++}
++#else /* CONFIG_PREEMPT_RCU */
++#define rcu_read_critical(p) (false)
++#endif /* CONFIG_PREEMPT_RCU */
++
++/*
++ * To determine if it's safe for a task of SCHED_IDLEPRIO to actually run as
++ * an idle task, we ensure none of the following conditions are met.
++ */
++static bool idleprio_suitable(struct task_struct *p)
++{
++ return (!(task_contributes_to_load(p)) && !(p->flags & (PF_EXITING)) &&
++ !signal_pending(p) && !rcu_read_critical(p) && !freezing(p));
++}
++
++/*
++ * To determine if a task of SCHED_ISO can run in pseudo-realtime, we check
++ * that the iso_refractory flag is not set.
++ */
++static inline bool isoprio_suitable(struct rq *rq)
++{
++ return !rq->iso_refractory;
++}
++
++/*
++ * Adding to the runqueue. Enter with rq locked.
++ */
++static void enqueue_task(struct rq *rq, struct task_struct *p, int flags)
++{
++ unsigned int randseed, cflags = 0;
++ u64 sl_id;
++
++ if (!rt_task(p)) {
++ /* Check it hasn't gotten rt from PI */
++ if ((idleprio_task(p) && idleprio_suitable(p)) ||
++ (iso_task(p) && isoprio_suitable(rq)))
++ p->prio = p->normal_prio;
++ else
++ p->prio = NORMAL_PRIO;
++ } else
++ rq->rt_nr_running++;
++ /*
++ * The sl_id key passed to the skiplist generates a sorted list.
++ * Realtime and sched iso tasks run FIFO so they only need be sorted
++ * according to priority. The skiplist will put tasks of the same
++ * key inserted later in FIFO order. Tasks of sched normal, batch
++ * and idleprio are sorted according to their deadlines. Idleprio
++ * tasks are offset by an impossibly large deadline value ensuring
++ * they get sorted into last positions, but still according to their
++ * own deadlines. This creates a "landscape" of skiplists running
++ * from priority 0 realtime in first place to the lowest priority
++ * idleprio tasks last. Skiplist insertion is an O(log n) process.
++ */
++ if (p->prio <= ISO_PRIO) {
++ sl_id = p->prio;
++ } else {
++ sl_id = p->deadline;
++ if (idleprio_task(p)) {
++ if (p->prio == IDLE_PRIO)
++ sl_id |= 0xF000000000000000;
++ else
++ sl_id += longest_deadline_diff();
++ }
++ }
++ /*
++ * Some architectures don't have better than microsecond resolution
++ * so mask out ~microseconds as the random seed for skiplist insertion.
++ */
++ update_clocks(rq);
++ if (!(flags & ENQUEUE_RESTORE)) {
++ sched_info_queued(rq, p);
++ psi_enqueue(p, flags & ENQUEUE_WAKEUP);
++ }
++
++ randseed = (rq->niffies >> 10) & 0xFFFFFFFF;
++ skiplist_insert(rq->sl, &p->node, sl_id, p, randseed);
++ rq->best_key = rq->node->next[0]->key;
++ if (p->in_iowait)
++ cflags |= SCHED_CPUFREQ_IOWAIT;
++ rq->nr_running++;
++ update_load_avg(rq, cflags);
++}
++
++/*
++ * Returns the relative length of deadline all compared to the shortest
++ * deadline which is that of nice -20.
++ */
++static inline int task_prio_ratio(struct task_struct *p)
++{
++ return prio_ratios[TASK_USER_PRIO(p)];
++}
++
++/*
++ * task_timeslice - all tasks of all priorities get the exact same timeslice
++ * length. CPU distribution is handled by giving different deadlines to
++ * tasks of different priorities. Use 128 as the base value for fast shifts.
++ */
++static inline int task_timeslice(struct task_struct *p)
++{
++ return (rr_interval * task_prio_ratio(p) / 128);
++}
++
++#ifdef CONFIG_SMP
++/* Entered with rq locked */
++static inline void resched_if_idle(struct rq *rq)
++{
++ if (rq_idle(rq))
++ resched_task(rq->curr);
++}
++
++static inline bool rq_local(struct rq *rq)
++{
++ return (rq->cpu == smp_processor_id());
++}
++#ifdef CONFIG_SMT_NICE
++static const cpumask_t *thread_cpumask(int cpu);
++
++/* Find the best real time priority running on any SMT siblings of cpu and if
++ * none are running, the static priority of the best deadline task running.
++ * The lookups to the other runqueues is done lockless as the occasional wrong
++ * value would be harmless. */
++static int best_smt_bias(struct rq *this_rq)
++{
++ int other_cpu, best_bias = 0;
++
++ for_each_cpu(other_cpu, &this_rq->thread_mask) {
++ struct rq *rq = cpu_rq(other_cpu);
++
++ if (rq_idle(rq))
++ continue;
++ if (unlikely(!rq->online))
++ continue;
++ if (!rq->rq_mm)
++ continue;
++ if (likely(rq->rq_smt_bias > best_bias))
++ best_bias = rq->rq_smt_bias;
++ }
++ return best_bias;
++}
++
++static int task_prio_bias(struct task_struct *p)
++{
++ if (rt_task(p))
++ return 1 << 30;
++ else if (task_running_iso(p))
++ return 1 << 29;
++ else if (task_running_idle(p))
++ return 0;
++ return MAX_PRIO - p->static_prio;
++}
++
++static bool smt_always_schedule(struct task_struct __maybe_unused *p, struct rq __maybe_unused *this_rq)
++{
++ return true;
++}
++
++static bool (*smt_schedule)(struct task_struct *p, struct rq *this_rq) = &smt_always_schedule;
++
++/* We've already decided p can run on CPU, now test if it shouldn't for SMT
++ * nice reasons. */
++static bool smt_should_schedule(struct task_struct *p, struct rq *this_rq)
++{
++ int best_bias, task_bias;
++
++ /* Kernel threads always run */
++ if (unlikely(!p->mm))
++ return true;
++ if (rt_task(p))
++ return true;
++ if (!idleprio_suitable(p))
++ return true;
++ best_bias = best_smt_bias(this_rq);
++ /* The smt siblings are all idle or running IDLEPRIO */
++ if (best_bias < 1)
++ return true;
++ task_bias = task_prio_bias(p);
++ if (task_bias < 1)
++ return false;
++ if (task_bias >= best_bias)
++ return true;
++ /* Dither 25% cpu of normal tasks regardless of nice difference */
++ if (best_bias % 4 == 1)
++ return true;
++ /* Sorry, you lose */
++ return false;
++}
++#else /* CONFIG_SMT_NICE */
++#define smt_schedule(p, this_rq) (true)
++#endif /* CONFIG_SMT_NICE */
++
++static inline void atomic_set_cpu(int cpu, cpumask_t *cpumask)
++{
++ set_bit(cpu, (volatile unsigned long *)cpumask);
++}
++
++/*
++ * The cpu_idle_map stores a bitmap of all the CPUs currently idle to
++ * allow easy lookup of whether any suitable idle CPUs are available.
++ * It's cheaper to maintain a binary yes/no if there are any idle CPUs on the
++ * idle_cpus variable than to do a full bitmask check when we are busy. The
++ * bits are set atomically but read locklessly as occasional false positive /
++ * negative is harmless.
++ */
++static inline void set_cpuidle_map(int cpu)
++{
++ if (likely(cpu_online(cpu)))
++ atomic_set_cpu(cpu, &cpu_idle_map);
++}
++
++static inline void atomic_clear_cpu(int cpu, cpumask_t *cpumask)
++{
++ clear_bit(cpu, (volatile unsigned long *)cpumask);
++}
++
++static inline void clear_cpuidle_map(int cpu)
++{
++ atomic_clear_cpu(cpu, &cpu_idle_map);
++}
++
++static bool suitable_idle_cpus(struct task_struct *p)
++{
++ return (cpumask_intersects(&p->cpus_allowed, &cpu_idle_map));
++}
++
++/*
++ * Resched current on rq. We don't know if rq is local to this CPU nor if it
++ * is locked so we do not use an intermediate variable for the task to avoid
++ * having it dereferenced.
++ */
++static void resched_curr(struct rq *rq)
++{
++ int cpu;
++
++ if (test_tsk_need_resched(rq->curr))
++ return;
++
++ rq->preempt = rq->curr;
++ cpu = rq->cpu;
++
++ /* We're doing this without holding the rq lock if it's not task_rq */
++
++ if (cpu == smp_processor_id()) {
++ set_tsk_need_resched(rq->curr);
++ set_preempt_need_resched();
++ return;
++ }
++
++ if (set_nr_and_not_polling(rq->curr))
++ smp_sched_reschedule(cpu);
++ else
++ trace_sched_wake_idle_without_ipi(cpu);
++}
++
++#define CPUIDLE_DIFF_THREAD (1)
++#define CPUIDLE_DIFF_CORE (2)
++#define CPUIDLE_CACHE_BUSY (4)
++#define CPUIDLE_DIFF_CPU (8)
++#define CPUIDLE_THREAD_BUSY (16)
++#define CPUIDLE_DIFF_NODE (32)
++
++/*
++ * The best idle CPU is chosen according to the CPUIDLE ranking above where the
++ * lowest value would give the most suitable CPU to schedule p onto next. The
++ * order works out to be the following:
++ *
++ * Same thread, idle or busy cache, idle or busy threads
++ * Other core, same cache, idle or busy cache, idle threads.
++ * Same node, other CPU, idle cache, idle threads.
++ * Same node, other CPU, busy cache, idle threads.
++ * Other core, same cache, busy threads.
++ * Same node, other CPU, busy threads.
++ * Other node, other CPU, idle cache, idle threads.
++ * Other node, other CPU, busy cache, idle threads.
++ * Other node, other CPU, busy threads.
++ */
++static int best_mask_cpu(int best_cpu, struct rq *rq, cpumask_t *tmpmask)
++{
++ int best_ranking = CPUIDLE_DIFF_NODE | CPUIDLE_THREAD_BUSY |
++ CPUIDLE_DIFF_CPU | CPUIDLE_CACHE_BUSY | CPUIDLE_DIFF_CORE |
++ CPUIDLE_DIFF_THREAD;
++ int cpu_tmp;
++
++ if (cpumask_test_cpu(best_cpu, tmpmask))
++ goto out;
++
++ for_each_cpu(cpu_tmp, tmpmask) {
++ int ranking, locality;
++ struct rq *tmp_rq;
++
++ ranking = 0;
++ tmp_rq = cpu_rq(cpu_tmp);
++
++ locality = rq->cpu_locality[cpu_tmp];
++#ifdef CONFIG_NUMA
++ if (locality > 3)
++ ranking |= CPUIDLE_DIFF_NODE;
++ else
++#endif
++ if (locality > 2)
++ ranking |= CPUIDLE_DIFF_CPU;
++#ifdef CONFIG_SCHED_MC
++ else if (locality == 2)
++ ranking |= CPUIDLE_DIFF_CORE;
++ else if (!(tmp_rq->cache_idle(tmp_rq)))
++ ranking |= CPUIDLE_CACHE_BUSY;
++#endif
++#ifdef CONFIG_SCHED_SMT
++ if (locality == 1)
++ ranking |= CPUIDLE_DIFF_THREAD;
++ if (!(tmp_rq->siblings_idle(tmp_rq)))
++ ranking |= CPUIDLE_THREAD_BUSY;
++#endif
++ if (ranking < best_ranking) {
++ best_cpu = cpu_tmp;
++ best_ranking = ranking;
++ }
++ }
++out:
++ return best_cpu;
++}
++
++bool cpus_share_cache(int this_cpu, int that_cpu)
++{
++ struct rq *this_rq = cpu_rq(this_cpu);
++
++ return (this_rq->cpu_locality[that_cpu] < 3);
++}
++
++/* As per resched_curr but only will resched idle task */
++static inline void resched_idle(struct rq *rq)
++{
++ if (test_tsk_need_resched(rq->idle))
++ return;
++
++ rq->preempt = rq->idle;
++
++ set_tsk_need_resched(rq->idle);
++
++ if (rq_local(rq)) {
++ set_preempt_need_resched();
++ return;
++ }
++
++ smp_sched_reschedule(rq->cpu);
++}
++
++static struct rq *resched_best_idle(struct task_struct *p, int cpu)
++{
++ cpumask_t tmpmask;
++ struct rq *rq;
++ int best_cpu;
++
++ cpumask_and(&tmpmask, &p->cpus_allowed, &cpu_idle_map);
++ best_cpu = best_mask_cpu(cpu, task_rq(p), &tmpmask);
++ rq = cpu_rq(best_cpu);
++ if (!smt_schedule(p, rq))
++ return NULL;
++ rq->preempt = p;
++ resched_idle(rq);
++ return rq;
++}
++
++static inline void resched_suitable_idle(struct task_struct *p)
++{
++ if (suitable_idle_cpus(p))
++ resched_best_idle(p, task_cpu(p));
++}
++
++static inline struct rq *rq_order(struct rq *rq, int cpu)
++{
++ return rq->rq_order[cpu];
++}
++#else /* CONFIG_SMP */
++static inline void set_cpuidle_map(int cpu)
++{
++}
++
++static inline void clear_cpuidle_map(int cpu)
++{
++}
++
++static inline bool suitable_idle_cpus(struct task_struct *p)
++{
++ return uprq->curr == uprq->idle;
++}
++
++static inline void resched_suitable_idle(struct task_struct *p)
++{
++}
++
++static inline void resched_curr(struct rq *rq)
++{
++ resched_task(rq->curr);
++}
++
++static inline void resched_if_idle(struct rq *rq)
++{
++}
++
++static inline bool rq_local(struct rq *rq)
++{
++ return true;
++}
++
++static inline struct rq *rq_order(struct rq *rq, int cpu)
++{
++ return rq;
++}
++
++static inline bool smt_schedule(struct task_struct *p, struct rq *rq)
++{
++ return true;
++}
++#endif /* CONFIG_SMP */
++
++static inline int normal_prio(struct task_struct *p)
++{
++ if (has_rt_policy(p))
++ return MAX_RT_PRIO - 1 - p->rt_priority;
++ if (idleprio_task(p))
++ return IDLE_PRIO;
++ if (iso_task(p))
++ return ISO_PRIO;
++ return NORMAL_PRIO;
++}
++
++/*
++ * Calculate the current priority, i.e. the priority
++ * taken into account by the scheduler. This value might
++ * be boosted by RT tasks as it will be RT if the task got
++ * RT-boosted. If not then it returns p->normal_prio.
++ */
++static int effective_prio(struct task_struct *p)
++{
++ p->normal_prio = normal_prio(p);
++ /*
++ * If we are RT tasks or we were boosted to RT priority,
++ * keep the priority unchanged. Otherwise, update priority
++ * to the normal priority:
++ */
++ if (!rt_prio(p->prio))
++ return p->normal_prio;
++ return p->prio;
++}
++
++/*
++ * activate_task - move a task to the runqueue. Enter with rq locked.
++ */
++static void activate_task(struct task_struct *p, struct rq *rq, int flags)
++{
++ resched_if_idle(rq);
++
++ /*
++ * Sleep time is in units of nanosecs, so shift by 20 to get a
++ * milliseconds-range estimation of the amount of time that the task
++ * spent sleeping:
++ */
++ if (unlikely(prof_on == SLEEP_PROFILING)) {
++ if (p->state == TASK_UNINTERRUPTIBLE)
++ profile_hits(SLEEP_PROFILING, (void *)get_wchan(p),
++ (rq->niffies - p->last_ran) >> 20);
++ }
++
++ p->prio = effective_prio(p);
++ if (task_contributes_to_load(p))
++ rq->nr_uninterruptible--;
++
++ enqueue_task(rq, p, flags);
++ p->on_rq = TASK_ON_RQ_QUEUED;
++}
++
++/*
++ * deactivate_task - If it's running, it's not on the runqueue and we can just
++ * decrement the nr_running. Enter with rq locked.
++ */
++static inline void deactivate_task(struct task_struct *p, struct rq *rq, int flags)
++{
++ if (task_contributes_to_load(p))
++ rq->nr_uninterruptible++;
++
++ p->on_rq = 0;
++ if (!(flags & DEQUEUE_SAVE)) {
++ sched_info_dequeued(rq, p);
++ psi_dequeue(p, flags & DEQUEUE_SLEEP);
++ }
++}
++
++#ifdef CONFIG_SMP
++void set_task_cpu(struct task_struct *p, unsigned int new_cpu)
++{
++ struct rq *rq;
++
++ if (task_cpu(p) == new_cpu)
++ return;
++
++ /* Do NOT call set_task_cpu on a currently queued task as we will not
++ * be reliably holding the rq lock after changing CPU. */
++ BUG_ON(task_queued(p));
++ rq = task_rq(p);
++
++#ifdef CONFIG_LOCKDEP
++ /*
++ * The caller should hold either p->pi_lock or rq->lock, when changing
++ * a task's CPU. ->pi_lock for waking tasks, rq->lock for runnable tasks.
++ *
++ * Furthermore, all task_rq users should acquire both locks, see
++ * task_rq_lock().
++ */
++ WARN_ON_ONCE(debug_locks && !(lockdep_is_held(&p->pi_lock) ||
++ lockdep_is_held(rq->lock)));
++#endif
++
++ trace_sched_migrate_task(p, new_cpu);
++ rseq_migrate(p);
++ perf_event_task_migrate(p);
++
++ /*
++ * After ->cpu is set up to a new value, task_rq_lock(p, ...) can be
++ * successfully executed on another CPU. We must ensure that updates of
++ * per-task data have been completed by this moment.
++ */
++ smp_wmb();
++
++ p->wake_cpu = new_cpu;
++
++ if (task_running(rq, p)) {
++ /*
++ * We should only be calling this on a running task if we're
++ * holding rq lock.
++ */
++ lockdep_assert_held(rq->lock);
++
++ /*
++ * We can't change the task_thread_info CPU on a running task
++ * as p will still be protected by the rq lock of the CPU it
++ * is still running on so we only set the wake_cpu for it to be
++ * lazily updated once off the CPU.
++ */
++ return;
++ }
++
++#ifdef CONFIG_THREAD_INFO_IN_TASK
++ WRITE_ONCE(p->cpu, new_cpu);
++#else
++ WRITE_ONCE(task_thread_info(p)->cpu, new_cpu);
++#endif
++ /* We're no longer protecting p after this point since we're holding
++ * the wrong runqueue lock. */
++}
++#endif /* CONFIG_SMP */
++
++/*
++ * Move a task off the runqueue and take it to a cpu for it will
++ * become the running task.
++ */
++static inline void take_task(struct rq *rq, int cpu, struct task_struct *p)
++{
++ struct rq *p_rq = task_rq(p);
++
++ dequeue_task(p_rq, p, DEQUEUE_SAVE);
++ if (p_rq != rq) {
++ sched_info_dequeued(p_rq, p);
++ sched_info_queued(rq, p);
++ }
++ set_task_cpu(p, cpu);
++}
++
++/*
++ * Returns a descheduling task to the runqueue unless it is being
++ * deactivated.
++ */
++static inline void return_task(struct task_struct *p, struct rq *rq,
++ int cpu, bool deactivate)
++{
++ if (deactivate)
++ deactivate_task(p, rq, DEQUEUE_SLEEP);
++ else {
++#ifdef CONFIG_SMP
++ /*
++ * set_task_cpu was called on the running task that doesn't
++ * want to deactivate so it has to be enqueued to a different
++ * CPU and we need its lock. Tag it to be moved with as the
++ * lock is dropped in finish_lock_switch.
++ */
++ if (unlikely(p->wake_cpu != cpu))
++ WRITE_ONCE(p->on_rq, TASK_ON_RQ_MIGRATING);
++ else
++#endif
++ enqueue_task(rq, p, ENQUEUE_RESTORE);
++ }
++}
++
++/* Enter with rq lock held. We know p is on the local cpu */
++static inline void __set_tsk_resched(struct task_struct *p)
++{
++ set_tsk_need_resched(p);
++ set_preempt_need_resched();
++}
++
++/**
++ * task_curr - is this task currently executing on a CPU?
++ * @p: the task in question.
++ *
++ * Return: 1 if the task is currently executing. 0 otherwise.
++ */
++inline int task_curr(const struct task_struct *p)
++{
++ return cpu_curr(task_cpu(p)) == p;
++}
++
++#ifdef CONFIG_SMP
++/*
++ * wait_task_inactive - wait for a thread to unschedule.
++ *
++ * If @match_state is nonzero, it's the @p->state value just checked and
++ * not expected to change. If it changes, i.e. @p might have woken up,
++ * then return zero. When we succeed in waiting for @p to be off its CPU,
++ * we return a positive number (its total switch count). If a second call
++ * a short while later returns the same number, the caller can be sure that
++ * @p has remained unscheduled the whole time.
++ *
++ * The caller must ensure that the task *will* unschedule sometime soon,
++ * else this function might spin for a *long* time. This function can't
++ * be called with interrupts off, or it may introduce deadlock with
++ * smp_call_function() if an IPI is sent by the same process we are
++ * waiting to become inactive.
++ */
++unsigned long wait_task_inactive(struct task_struct *p, long match_state)
++{
++ int running, queued;
++ struct rq_flags rf;
++ unsigned long ncsw;
++ struct rq *rq;
++
++ for (;;) {
++ rq = task_rq(p);
++
++ /*
++ * If the task is actively running on another CPU
++ * still, just relax and busy-wait without holding
++ * any locks.
++ *
++ * NOTE! Since we don't hold any locks, it's not
++ * even sure that "rq" stays as the right runqueue!
++ * But we don't care, since this will return false
++ * if the runqueue has changed and p is actually now
++ * running somewhere else!
++ */
++ while (task_running(rq, p)) {
++ if (match_state && unlikely(p->state != match_state))
++ return 0;
++ cpu_relax();
++ }
++
++ /*
++ * Ok, time to look more closely! We need the rq
++ * lock now, to be *sure*. If we're wrong, we'll
++ * just go back and repeat.
++ */
++ rq = task_rq_lock(p, &rf);
++ trace_sched_wait_task(p);
++ running = task_running(rq, p);
++ queued = task_on_rq_queued(p);
++ ncsw = 0;
++ if (!match_state || p->state == match_state)
++ ncsw = p->nvcsw | LONG_MIN; /* sets MSB */
++ task_rq_unlock(rq, p, &rf);
++
++ /*
++ * If it changed from the expected state, bail out now.
++ */
++ if (unlikely(!ncsw))
++ break;
++
++ /*
++ * Was it really running after all now that we
++ * checked with the proper locks actually held?
++ *
++ * Oops. Go back and try again..
++ */
++ if (unlikely(running)) {
++ cpu_relax();
++ continue;
++ }
++
++ /*
++ * It's not enough that it's not actively running,
++ * it must be off the runqueue _entirely_, and not
++ * preempted!
++ *
++ * So if it was still runnable (but just not actively
++ * running right now), it's preempted, and we should
++ * yield - it could be a while.
++ */
++ if (unlikely(queued)) {
++ ktime_t to = NSEC_PER_SEC / HZ;
++
++ set_current_state(TASK_UNINTERRUPTIBLE);
++ schedule_hrtimeout(&to, HRTIMER_MODE_REL);
++ continue;
++ }
++
++ /*
++ * Ahh, all good. It wasn't running, and it wasn't
++ * runnable, which means that it will never become
++ * running in the future either. We're all done!
++ */
++ break;
++ }
++
++ return ncsw;
++}
++
++/***
++ * kick_process - kick a running thread to enter/exit the kernel
++ * @p: the to-be-kicked thread
++ *
++ * Cause a process which is running on another CPU to enter
++ * kernel-mode, without any delay. (to get signals handled.)
++ *
++ * NOTE: this function doesn't have to take the runqueue lock,
++ * because all it wants to ensure is that the remote task enters
++ * the kernel. If the IPI races and the task has been migrated
++ * to another CPU then no harm is done and the purpose has been
++ * achieved as well.
++ */
++void kick_process(struct task_struct *p)
++{
++ int cpu;
++
++ preempt_disable();
++ cpu = task_cpu(p);
++ if ((cpu != smp_processor_id()) && task_curr(p))
++ smp_sched_reschedule(cpu);
++ preempt_enable();
++}
++EXPORT_SYMBOL_GPL(kick_process);
++#endif
++
++/*
++ * RT tasks preempt purely on priority. SCHED_NORMAL tasks preempt on the
++ * basis of earlier deadlines. SCHED_IDLEPRIO don't preempt anything else or
++ * between themselves, they cooperatively multitask. An idle rq scores as
++ * prio PRIO_LIMIT so it is always preempted.
++ */
++static inline bool
++can_preempt(struct task_struct *p, int prio, u64 deadline)
++{
++ /* Better static priority RT task or better policy preemption */
++ if (p->prio < prio)
++ return true;
++ if (p->prio > prio)
++ return false;
++ if (p->policy == SCHED_BATCH)
++ return false;
++ /* SCHED_NORMAL and ISO will preempt based on deadline */
++ if (!deadline_before(p->deadline, deadline))
++ return false;
++ return true;
++}
++
++#ifdef CONFIG_SMP
++
++static inline bool is_per_cpu_kthread(struct task_struct *p)
++{
++ if (!(p->flags & PF_KTHREAD))
++ return false;
++
++ if (p->nr_cpus_allowed != 1)
++ return false;
++
++ return true;
++}
++
++/*
++ * Per-CPU kthreads are allowed to run on !active && online CPUs, see
++ * __set_cpus_allowed_ptr().
++ */
++static inline bool is_cpu_allowed(struct task_struct *p, int cpu)
++{
++ if (!cpumask_test_cpu(cpu, &p->cpus_allowed))
++ return false;
++
++ if (is_per_cpu_kthread(p))
++ return cpu_online(cpu);
++
++ return cpu_active(cpu);
++}
++
++/*
++ * Check to see if p can run on cpu, and if not, whether there are any online
++ * CPUs it can run on instead. This only happens with the hotplug threads that
++ * bring up the CPUs.
++ */
++static inline bool sched_other_cpu(struct task_struct *p, int cpu)
++{
++ if (likely(cpumask_test_cpu(cpu, &p->cpus_allowed)))
++ return false;
++ if (p->nr_cpus_allowed == 1) {
++ cpumask_t valid_mask;
++
++ cpumask_and(&valid_mask, &p->cpus_allowed, cpu_online_mask);
++ if (unlikely(cpumask_empty(&valid_mask)))
++ return false;
++ }
++ return true;
++}
++
++static inline bool needs_other_cpu(struct task_struct *p, int cpu)
++{
++ if (cpumask_test_cpu(cpu, &p->cpus_allowed))
++ return false;
++ return true;
++}
++
++#define cpu_online_map (*(cpumask_t *)cpu_online_mask)
++
++static void try_preempt(struct task_struct *p, struct rq *this_rq)
++{
++ int i, this_entries = rq_load(this_rq);
++ cpumask_t tmp;
++
++ if (suitable_idle_cpus(p) && resched_best_idle(p, task_cpu(p)))
++ return;
++
++ /* IDLEPRIO tasks never preempt anything but idle */
++ if (p->policy == SCHED_IDLEPRIO)
++ return;
++
++ cpumask_and(&tmp, &cpu_online_map, &p->cpus_allowed);
++
++ for (i = 0; i < num_possible_cpus(); i++) {
++ struct rq *rq = this_rq->cpu_order[i];
++
++ if (!cpumask_test_cpu(rq->cpu, &tmp))
++ continue;
++
++ if (!sched_interactive && rq != this_rq && rq_load(rq) <= this_entries)
++ continue;
++ if (smt_schedule(p, rq) && can_preempt(p, rq->rq_prio, rq->rq_deadline)) {
++ /* We set rq->preempting lockless, it's a hint only */
++ rq->preempting = p;
++ resched_curr(rq);
++ return;
++ }
++ }
++}
++
++static int __set_cpus_allowed_ptr(struct task_struct *p,
++ const struct cpumask *new_mask, bool check);
++#else /* CONFIG_SMP */
++static inline bool needs_other_cpu(struct task_struct *p, int cpu)
++{
++ return false;
++}
++
++static void try_preempt(struct task_struct *p, struct rq *this_rq)
++{
++ if (p->policy == SCHED_IDLEPRIO)
++ return;
++ if (can_preempt(p, uprq->rq_prio, uprq->rq_deadline))
++ resched_curr(uprq);
++}
++
++static inline int __set_cpus_allowed_ptr(struct task_struct *p,
++ const struct cpumask *new_mask, bool check)
++{
++ return set_cpus_allowed_ptr(p, new_mask);
++}
++#endif /* CONFIG_SMP */
++
++/*
++ * wake flags
++ */
++#define WF_SYNC 0x01 /* waker goes to sleep after wakeup */
++#define WF_FORK 0x02 /* child wakeup after fork */
++#define WF_MIGRATED 0x04 /* internal use, task got migrated */
++
++static void
++ttwu_stat(struct task_struct *p, int cpu, int wake_flags)
++{
++ struct rq *rq;
++
++ if (!schedstat_enabled())
++ return;
++
++ rq = this_rq();
++
++#ifdef CONFIG_SMP
++ if (cpu == rq->cpu) {
++ __schedstat_inc(rq->ttwu_local);
++ } else {
++ struct sched_domain *sd;
++
++ rcu_read_lock();
++ for_each_domain(rq->cpu, sd) {
++ if (cpumask_test_cpu(cpu, sched_domain_span(sd))) {
++ __schedstat_inc(sd->ttwu_wake_remote);
++ break;
++ }
++ }
++ rcu_read_unlock();
++ }
++
++#endif /* CONFIG_SMP */
++
++ __schedstat_inc(rq->ttwu_count);
++}
++
++static inline void ttwu_activate(struct rq *rq, struct task_struct *p, int en_flags)
++{
++ activate_task(p, rq, en_flags);
++
++ /* if a worker is waking up, notify the workqueue */
++ if (p->flags & PF_WQ_WORKER)
++ wq_worker_waking_up(p, cpu_of(rq));
++}
++
++/*
++ * Mark the task runnable and perform wakeup-preemption.
++ */
++static void ttwu_do_wakeup(struct rq *rq, struct task_struct *p, int wake_flags)
++{
++ /*
++ * Sync wakeups (i.e. those types of wakeups where the waker
++ * has indicated that it will leave the CPU in short order)
++ * don't trigger a preemption if there are no idle cpus,
++ * instead waiting for current to deschedule.
++ */
++ if (wake_flags & WF_SYNC)
++ resched_suitable_idle(p);
++ else
++ try_preempt(p, rq);
++ p->state = TASK_RUNNING;
++ trace_sched_wakeup(p);
++}
++
++static void
++ttwu_do_activate(struct rq *rq, struct task_struct *p, int wake_flags)
++{
++ int en_flags = ENQUEUE_WAKEUP;
++
++ lockdep_assert_held(rq->lock);
++
++#ifdef CONFIG_SMP
++ if (p->sched_contributes_to_load)
++ rq->nr_uninterruptible--;
++
++ if (wake_flags & WF_MIGRATED)
++ en_flags |= ENQUEUE_MIGRATED;
++#endif
++
++ ttwu_activate(rq, p, en_flags);
++ ttwu_do_wakeup(rq, p, wake_flags);
++}
++
++/*
++ * Called in case the task @p isn't fully descheduled from its runqueue,
++ * in this case we must do a remote wakeup. Its a 'light' wakeup though,
++ * since all we need to do is flip p->state to TASK_RUNNING, since
++ * the task is still ->on_rq.
++ */
++static int ttwu_remote(struct task_struct *p, int wake_flags)
++{
++ struct rq *rq;
++ int ret = 0;
++
++ rq = __task_rq_lock(p, NULL);
++ if (likely(task_on_rq_queued(p))) {
++ ttwu_do_wakeup(rq, p, wake_flags);
++ ret = 1;
++ }
++ __task_rq_unlock(rq, NULL);
++
++ return ret;
++}
++
++#ifdef CONFIG_SMP
++void sched_ttwu_pending(void)
++{
++ struct rq *rq = this_rq();
++ struct llist_node *llist = llist_del_all(&rq->wake_list);
++ struct task_struct *p, *t;
++ struct rq_flags rf;
++
++ if (!llist)
++ return;
++
++ rq_lock_irqsave(rq, &rf);
++
++ llist_for_each_entry_safe(p, t, llist, wake_entry)
++ ttwu_do_activate(rq, p, 0);
++
++ rq_unlock_irqrestore(rq, &rf);
++}
++
++void scheduler_ipi(void)
++{
++ /*
++ * Fold TIF_NEED_RESCHED into the preempt_count; anybody setting
++ * TIF_NEED_RESCHED remotely (for the first time) will also send
++ * this IPI.
++ */
++ preempt_fold_need_resched();
++
++ if (llist_empty(&this_rq()->wake_list) && (!idle_cpu(smp_processor_id()) || need_resched()))
++ return;
++
++ /*
++ * Not all reschedule IPI handlers call irq_enter/irq_exit, since
++ * traditionally all their work was done from the interrupt return
++ * path. Now that we actually do some work, we need to make sure
++ * we do call them.
++ *
++ * Some archs already do call them, luckily irq_enter/exit nest
++ * properly.
++ *
++ * Arguably we should visit all archs and update all handlers,
++ * however a fair share of IPIs are still resched only so this would
++ * somewhat pessimize the simple resched case.
++ */
++ irq_enter();
++ sched_ttwu_pending();
++ irq_exit();
++}
++
++static void ttwu_queue_remote(struct task_struct *p, int cpu, int wake_flags)
++{
++ struct rq *rq = cpu_rq(cpu);
++
++ if (llist_add(&p->wake_entry, &cpu_rq(cpu)->wake_list)) {
++ if (!set_nr_if_polling(rq->idle))
++ smp_sched_reschedule(cpu);
++ else
++ trace_sched_wake_idle_without_ipi(cpu);
++ }
++}
++
++void wake_up_if_idle(int cpu)
++{
++ struct rq *rq = cpu_rq(cpu);
++ struct rq_flags rf;
++
++ rcu_read_lock();
++
++ if (!is_idle_task(rcu_dereference(rq->curr)))
++ goto out;
++
++ if (set_nr_if_polling(rq->idle)) {
++ trace_sched_wake_idle_without_ipi(cpu);
++ } else {
++ rq_lock_irqsave(rq, &rf);
++ if (likely(is_idle_task(rq->curr)))
++ smp_sched_reschedule(cpu);
++ /* Else cpu is not in idle, do nothing here */
++ rq_unlock_irqrestore(rq, &rf);
++ }
++
++out:
++ rcu_read_unlock();
++}
++
++static int valid_task_cpu(struct task_struct *p)
++{
++ cpumask_t valid_mask;
++
++ if (p->flags & PF_KTHREAD)
++ cpumask_and(&valid_mask, &p->cpus_allowed, cpu_all_mask);
++ else
++ cpumask_and(&valid_mask, &p->cpus_allowed, cpu_active_mask);
++
++ if (unlikely(!cpumask_weight(&valid_mask))) {
++ /* We shouldn't be hitting this any more */
++ printk(KERN_WARNING "SCHED: No cpumask for %s/%d weight %d\n", p->comm,
++ p->pid, cpumask_weight(&p->cpus_allowed));
++ return cpumask_any(&p->cpus_allowed);
++ }
++ return cpumask_any(&valid_mask);
++}
++
++/*
++ * For a task that's just being woken up we have a valuable balancing
++ * opportunity so choose the nearest cache most lightly loaded runqueue.
++ * Entered with rq locked and returns with the chosen runqueue locked.
++ */
++static inline int select_best_cpu(struct task_struct *p)
++{
++ unsigned int idlest = ~0U;
++ struct rq *rq = NULL;
++ int i;
++
++ if (suitable_idle_cpus(p)) {
++ int cpu = task_cpu(p);
++
++ if (unlikely(needs_other_cpu(p, cpu)))
++ cpu = valid_task_cpu(p);
++ rq = resched_best_idle(p, cpu);
++ if (likely(rq))
++ return rq->cpu;
++ }
++
++ for (i = 0; i < num_possible_cpus(); i++) {
++ struct rq *other_rq = task_rq(p)->cpu_order[i];
++ int entries;
++
++ if (!other_rq->online)
++ continue;
++ if (needs_other_cpu(p, other_rq->cpu))
++ continue;
++ entries = rq_load(other_rq);
++ if (entries >= idlest)
++ continue;
++ idlest = entries;
++ rq = other_rq;
++ }
++ if (unlikely(!rq))
++ return task_cpu(p);
++ return rq->cpu;
++}
++#else /* CONFIG_SMP */
++static int valid_task_cpu(struct task_struct *p)
++{
++ return 0;
++}
++
++static inline int select_best_cpu(struct task_struct *p)
++{
++ return 0;
++}
++
++static struct rq *resched_best_idle(struct task_struct *p, int cpu)
++{
++ return NULL;
++}
++#endif /* CONFIG_SMP */
++
++static void ttwu_queue(struct task_struct *p, int cpu, int wake_flags)
++{
++ struct rq *rq = cpu_rq(cpu);
++
++#if defined(CONFIG_SMP)
++ if (!cpus_share_cache(smp_processor_id(), cpu)) {
++ sched_clock_cpu(cpu); /* Sync clocks across CPUs */
++ ttwu_queue_remote(p, cpu, wake_flags);
++ return;
++ }
++#endif
++ rq_lock(rq);
++ ttwu_do_activate(rq, p, wake_flags);
++ rq_unlock(rq);
++}
++
++/***
++ * try_to_wake_up - wake up a thread
++ * @p: the thread to be awakened
++ * @state: the mask of task states that can be woken
++ * @wake_flags: wake modifier flags (WF_*)
++ *
++ * Put it on the run-queue if it's not already there. The "current"
++ * thread is always on the run-queue (except when the actual
++ * re-schedule is in progress), and as such you're allowed to do
++ * the simpler "current->state = TASK_RUNNING" to mark yourself
++ * runnable without the overhead of this.
++ *
++ * Return: %true if @p was woken up, %false if it was already running.
++ * or @state didn't match @p's state.
++ */
++static int
++try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags)
++{
++ unsigned long flags;
++ int cpu, success = 0;
++
++ /*
++ * If we are going to wake up a thread waiting for CONDITION we
++ * need to ensure that CONDITION=1 done by the caller can not be
++ * reordered with p->state check below. This pairs with mb() in
++ * set_current_state() the waiting thread does.
++ */
++ raw_spin_lock_irqsave(&p->pi_lock, flags);
++ smp_mb__after_spinlock();
++ /* state is a volatile long, どうして、分からない */
++ if (!((unsigned int)p->state & state))
++ goto out;
++
++ trace_sched_waking(p);
++
++ /* We're going to change ->state: */
++ success = 1;
++ cpu = task_cpu(p);
++
++ /*
++ * Ensure we load p->on_rq _after_ p->state, otherwise it would
++ * be possible to, falsely, observe p->on_rq == 0 and get stuck
++ * in smp_cond_load_acquire() below.
++ *
++ * sched_ttwu_pending() try_to_wake_up()
++ * STORE p->on_rq = 1 LOAD p->state
++ * UNLOCK rq->lock
++ *
++ * __schedule() (switch to task 'p')
++ * LOCK rq->lock smp_rmb();
++ * smp_mb__after_spinlock();
++ * UNLOCK rq->lock
++ *
++ * [task p]
++ * STORE p->state = UNINTERRUPTIBLE LOAD p->on_rq
++ *
++ * Pairs with the LOCK+smp_mb__after_spinlock() on rq->lock in
++ * __schedule(). See the comment for smp_mb__after_spinlock().
++ */
++ smp_rmb();
++ if (p->on_rq && ttwu_remote(p, wake_flags))
++ goto stat;
++
++#ifdef CONFIG_SMP
++ /*
++ * Ensure we load p->on_cpu _after_ p->on_rq, otherwise it would be
++ * possible to, falsely, observe p->on_cpu == 0.
++ *
++ * One must be running (->on_cpu == 1) in order to remove oneself
++ * from the runqueue.
++ *
++ * __schedule() (switch to task 'p') try_to_wake_up()
++ * STORE p->on_cpu = 1 LOAD p->on_rq
++ * UNLOCK rq->lock
++ *
++ * __schedule() (put 'p' to sleep)
++ * LOCK rq->lock smp_rmb();
++ * smp_mb__after_spinlock();
++ * STORE p->on_rq = 0 LOAD p->on_cpu
++ *
++ * Pairs with the LOCK+smp_mb__after_spinlock() on rq->lock in
++ * __schedule(). See the comment for smp_mb__after_spinlock().
++ */
++ smp_rmb();
++
++ /*
++ * If the owning (remote) CPU is still in the middle of schedule() with
++ * this task as prev, wait until its done referencing the task.
++ *
++ * Pairs with the smp_store_release() in finish_task().
++ *
++ * This ensures that tasks getting woken will be fully ordered against
++ * their previous state and preserve Program Order.
++ */
++ smp_cond_load_acquire(&p->on_cpu, !VAL);
++
++ p->sched_contributes_to_load = !!task_contributes_to_load(p);
++ p->state = TASK_WAKING;
++
++ if (p->in_iowait) {
++ delayacct_blkio_end(p);
++ atomic_dec(&task_rq(p)->nr_iowait);
++ }
++
++ cpu = select_best_cpu(p);
++ if (task_cpu(p) != cpu) {
++ wake_flags |= WF_MIGRATED;
++ psi_ttwu_dequeue(p);
++ set_task_cpu(p, cpu);
++ }
++
++#else /* CONFIG_SMP */
++
++ if (p->in_iowait) {
++ delayacct_blkio_end(p);
++ atomic_dec(&task_rq(p)->nr_iowait);
++ }
++
++#endif /* CONFIG_SMP */
++
++ ttwu_queue(p, cpu, wake_flags);
++stat:
++ ttwu_stat(p, cpu, wake_flags);
++out:
++ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
++
++ return success;
++}
++
++/**
++ * try_to_wake_up_local - try to wake up a local task with rq lock held
++ * @p: the thread to be awakened
++ *
++ * Put @p on the run-queue if it's not already there. The caller must
++ * ensure that rq is locked and, @p is not the current task.
++ * rq stays locked over invocation.
++ */
++static void try_to_wake_up_local(struct task_struct *p)
++{
++ struct rq *rq = task_rq(p);
++
++ if (WARN_ON_ONCE(rq != this_rq()) ||
++ WARN_ON_ONCE(p == current))
++ return;
++
++ lockdep_assert_held(rq->lock);
++
++ if (!raw_spin_trylock(&p->pi_lock)) {
++ /*
++ * This is OK, because current is on_cpu, which avoids it being
++ * picked for load-balance and preemption/IRQs are still
++ * disabled avoiding further scheduler activity on it and we've
++ * not yet picked a replacement task.
++ */
++ rq_unlock(rq);
++ raw_spin_lock(&p->pi_lock);
++ rq_lock(rq);
++ }
++
++ if (!(p->state & TASK_NORMAL))
++ goto out;
++
++ trace_sched_waking(p);
++
++ if (!task_on_rq_queued(p)) {
++ if (p->in_iowait) {
++ delayacct_blkio_end(p);
++ atomic_dec(&rq->nr_iowait);
++ }
++ ttwu_activate(rq, p, ENQUEUE_WAKEUP);
++ }
++
++ ttwu_do_wakeup(rq, p, 0);
++ ttwu_stat(p, smp_processor_id(), 0);
++out:
++ raw_spin_unlock(&p->pi_lock);
++}
++
++/**
++ * wake_up_process - Wake up a specific process
++ * @p: The process to be woken up.
++ *
++ * Attempt to wake up the nominated process and move it to the set of runnable
++ * processes.
++ *
++ * Return: 1 if the process was woken up, 0 if it was already running.
++ *
++ * This function executes a full memory barrier before accessing the task state.
++ */
++int wake_up_process(struct task_struct *p)
++{
++ return try_to_wake_up(p, TASK_NORMAL, 0);
++}
++EXPORT_SYMBOL(wake_up_process);
++
++int wake_up_state(struct task_struct *p, unsigned int state)
++{
++ return try_to_wake_up(p, state, 0);
++}
++
++static void time_slice_expired(struct task_struct *p, struct rq *rq);
++
++/*
++ * Perform scheduler related setup for a newly forked process p.
++ * p is forked by current.
++ */
++int sched_fork(unsigned long __maybe_unused clone_flags, struct task_struct *p)
++{
++ unsigned long flags;
++
++#ifdef CONFIG_PREEMPT_NOTIFIERS
++ INIT_HLIST_HEAD(&p->preempt_notifiers);
++#endif
++
++#ifdef CONFIG_COMPACTION
++ p->capture_control = NULL;
++#endif
++
++ /*
++ * We mark the process as NEW here. This guarantees that
++ * nobody will actually run it, and a signal or other external
++ * event cannot wake it up and insert it on the runqueue either.
++ */
++ p->state = TASK_NEW;
++
++ /*
++ * The process state is set to the same value of the process executing
++ * do_fork() code. That is running. This guarantees that nobody will
++ * actually run it, and a signal or other external event cannot wake
++ * it up and insert it on the runqueue either.
++ */
++
++ /* Should be reset in fork.c but done here for ease of MuQSS patching */
++ p->on_cpu =
++ p->on_rq =
++ p->utime =
++ p->stime =
++ p->sched_time =
++ p->stime_ns =
++ p->utime_ns = 0;
++ skiplist_node_init(&p->node);
++
++ /*
++ * Revert to default priority/policy on fork if requested.
++ */
++ if (unlikely(p->sched_reset_on_fork)) {
++ if (p->policy == SCHED_FIFO || p->policy == SCHED_RR) {
++ p->policy = SCHED_NORMAL;
++ p->normal_prio = normal_prio(p);
++ }
++
++ if (PRIO_TO_NICE(p->static_prio) < 0) {
++ p->static_prio = NICE_TO_PRIO(0);
++ p->normal_prio = p->static_prio;
++ }
++
++ /*
++ * We don't need the reset flag anymore after the fork. It has
++ * fulfilled its duty:
++ */
++ p->sched_reset_on_fork = 0;
++ }
++
++ /*
++ * Silence PROVE_RCU.
++ */
++ raw_spin_lock_irqsave(&p->pi_lock, flags);
++ set_task_cpu(p, smp_processor_id());
++ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
++
++#ifdef CONFIG_SCHED_INFO
++ if (unlikely(sched_info_on()))
++ memset(&p->sched_info, 0, sizeof(p->sched_info));
++#endif
++ init_task_preempt_count(p);
++
++ return 0;
++}
++
++#ifdef CONFIG_SCHEDSTATS
++
++DEFINE_STATIC_KEY_FALSE(sched_schedstats);
++static bool __initdata __sched_schedstats = false;
++
++static void set_schedstats(bool enabled)
++{
++ if (enabled)
++ static_branch_enable(&sched_schedstats);
++ else
++ static_branch_disable(&sched_schedstats);
++}
++
++void force_schedstat_enabled(void)
++{
++ if (!schedstat_enabled()) {
++ pr_info("kernel profiling enabled schedstats, disable via kernel.sched_schedstats.\n");
++ static_branch_enable(&sched_schedstats);
++ }
++}
++
++static int __init setup_schedstats(char *str)
++{
++ int ret = 0;
++ if (!str)
++ goto out;
++
++ /*
++ * This code is called before jump labels have been set up, so we can't
++ * change the static branch directly just yet. Instead set a temporary
++ * variable so init_schedstats() can do it later.
++ */
++ if (!strcmp(str, "enable")) {
++ __sched_schedstats = true;
++ ret = 1;
++ } else if (!strcmp(str, "disable")) {
++ __sched_schedstats = false;
++ ret = 1;
++ }
++out:
++ if (!ret)
++ pr_warn("Unable to parse schedstats=\n");
++
++ return ret;
++}
++__setup("schedstats=", setup_schedstats);
++
++static void __init init_schedstats(void)
++{
++ set_schedstats(__sched_schedstats);
++}
++
++#ifdef CONFIG_PROC_SYSCTL
++int sysctl_schedstats(struct ctl_table *table, int write,
++ void __user *buffer, size_t *lenp, loff_t *ppos)
++{
++ struct ctl_table t;
++ int err;
++ int state = static_branch_likely(&sched_schedstats);
++
++ if (write && !capable(CAP_SYS_ADMIN))
++ return -EPERM;
++
++ t = *table;
++ t.data = &state;
++ err = proc_dointvec_minmax(&t, write, buffer, lenp, ppos);
++ if (err < 0)
++ return err;
++ if (write)
++ set_schedstats(state);
++ return err;
++}
++#endif /* CONFIG_PROC_SYSCTL */
++#else /* !CONFIG_SCHEDSTATS */
++static inline void init_schedstats(void) {}
++#endif /* CONFIG_SCHEDSTATS */
++
++static void update_cpu_clock_switch(struct rq *rq, struct task_struct *p);
++
++static void account_task_cpu(struct rq *rq, struct task_struct *p)
++{
++ update_clocks(rq);
++ /* This isn't really a context switch but accounting is the same */
++ update_cpu_clock_switch(rq, p);
++ p->last_ran = rq->niffies;
++}
++
++bool sched_smp_initialized __read_mostly;
++
++static inline int hrexpiry_enabled(struct rq *rq)
++{
++ if (unlikely(!cpu_active(cpu_of(rq)) || !sched_smp_initialized))
++ return 0;
++ return hrtimer_is_hres_active(&rq->hrexpiry_timer);
++}
++
++/*
++ * Use HR-timers to deliver accurate preemption points.
++ */
++static inline void hrexpiry_clear(struct rq *rq)
++{
++ if (!hrexpiry_enabled(rq))
++ return;
++ if (hrtimer_active(&rq->hrexpiry_timer))
++ hrtimer_cancel(&rq->hrexpiry_timer);
++}
++
++/*
++ * High-resolution time_slice expiry.
++ * Runs from hardirq context with interrupts disabled.
++ */
++static enum hrtimer_restart hrexpiry(struct hrtimer *timer)
++{
++ struct rq *rq = container_of(timer, struct rq, hrexpiry_timer);
++ struct task_struct *p;
++
++ /* This can happen during CPU hotplug / resume */
++ if (unlikely(cpu_of(rq) != smp_processor_id()))
++ goto out;
++
++ /*
++ * We're doing this without the runqueue lock but this should always
++ * be run on the local CPU. Time slice should run out in __schedule
++ * but we set it to zero here in case niffies is slightly less.
++ */
++ p = rq->curr;
++ p->time_slice = 0;
++ __set_tsk_resched(p);
++out:
++ return HRTIMER_NORESTART;
++}
++
++/*
++ * Called to set the hrexpiry timer state.
++ *
++ * called with irqs disabled from the local CPU only
++ */
++static void hrexpiry_start(struct rq *rq, u64 delay)
++{
++ if (!hrexpiry_enabled(rq))
++ return;
++
++ hrtimer_start(&rq->hrexpiry_timer, ns_to_ktime(delay),
++ HRTIMER_MODE_REL_PINNED);
++}
++
++static void init_rq_hrexpiry(struct rq *rq)
++{
++ hrtimer_init(&rq->hrexpiry_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
++ rq->hrexpiry_timer.function = hrexpiry;
++}
++
++static inline int rq_dither(struct rq *rq)
++{
++ if (!hrexpiry_enabled(rq))
++ return HALF_JIFFY_US;
++ return 0;
++}
++
++/*
++ * wake_up_new_task - wake up a newly created task for the first time.
++ *
++ * This function will do some initial scheduler statistics housekeeping
++ * that must be done for every newly created context, then puts the task
++ * on the runqueue and wakes it.
++ */
++void wake_up_new_task(struct task_struct *p)
++{
++ struct task_struct *parent, *rq_curr;
++ struct rq *rq, *new_rq;
++ unsigned long flags;
++
++ parent = p->parent;
++
++ raw_spin_lock_irqsave(&p->pi_lock, flags);
++ p->state = TASK_RUNNING;
++ /* Task_rq can't change yet on a new task */
++ new_rq = rq = task_rq(p);
++ if (unlikely(needs_other_cpu(p, task_cpu(p)))) {
++ set_task_cpu(p, valid_task_cpu(p));
++ new_rq = task_rq(p);
++ }
++
++ double_rq_lock(rq, new_rq);
++ rq_curr = rq->curr;
++
++ /*
++ * Make sure we do not leak PI boosting priority to the child.
++ */
++ p->prio = rq_curr->normal_prio;
++
++ trace_sched_wakeup_new(p);
++
++ /*
++ * Share the timeslice between parent and child, thus the
++ * total amount of pending timeslices in the system doesn't change,
++ * resulting in more scheduling fairness. If it's negative, it won't
++ * matter since that's the same as being 0. rq->rq_deadline is only
++ * modified within schedule() so it is always equal to
++ * current->deadline.
++ */
++ account_task_cpu(rq, rq_curr);
++ p->last_ran = rq_curr->last_ran;
++ if (likely(rq_curr->policy != SCHED_FIFO)) {
++ rq_curr->time_slice /= 2;
++ if (rq_curr->time_slice < RESCHED_US) {
++ /*
++ * Forking task has run out of timeslice. Reschedule it and
++ * start its child with a new time slice and deadline. The
++ * child will end up running first because its deadline will
++ * be slightly earlier.
++ */
++ __set_tsk_resched(rq_curr);
++ time_slice_expired(p, new_rq);
++ if (suitable_idle_cpus(p))
++ resched_best_idle(p, task_cpu(p));
++ else if (unlikely(rq != new_rq))
++ try_preempt(p, new_rq);
++ } else {
++ p->time_slice = rq_curr->time_slice;
++ if (rq_curr == parent && rq == new_rq && !suitable_idle_cpus(p)) {
++ /*
++ * The VM isn't cloned, so we're in a good position to
++ * do child-runs-first in anticipation of an exec. This
++ * usually avoids a lot of COW overhead.
++ */
++ __set_tsk_resched(rq_curr);
++ } else {
++ /*
++ * Adjust the hrexpiry since rq_curr will keep
++ * running and its timeslice has been shortened.
++ */
++ hrexpiry_start(rq, US_TO_NS(rq_curr->time_slice));
++ try_preempt(p, new_rq);
++ }
++ }
++ } else {
++ time_slice_expired(p, new_rq);
++ try_preempt(p, new_rq);
++ }
++ activate_task(p, new_rq, 0);
++ double_rq_unlock(rq, new_rq);
++ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
++}
++
++#ifdef CONFIG_PREEMPT_NOTIFIERS
++
++static DEFINE_STATIC_KEY_FALSE(preempt_notifier_key);
++
++void preempt_notifier_inc(void)
++{
++ static_branch_inc(&preempt_notifier_key);
++}
++EXPORT_SYMBOL_GPL(preempt_notifier_inc);
++
++void preempt_notifier_dec(void)
++{
++ static_branch_dec(&preempt_notifier_key);
++}
++EXPORT_SYMBOL_GPL(preempt_notifier_dec);
++
++/**
++ * preempt_notifier_register - tell me when current is being preempted & rescheduled
++ * @notifier: notifier struct to register
++ */
++void preempt_notifier_register(struct preempt_notifier *notifier)
++{
++ if (!static_branch_unlikely(&preempt_notifier_key))
++ WARN(1, "registering preempt_notifier while notifiers disabled\n");
++
++ hlist_add_head(&notifier->link, &current->preempt_notifiers);
++}
++EXPORT_SYMBOL_GPL(preempt_notifier_register);
++
++/**
++ * preempt_notifier_unregister - no longer interested in preemption notifications
++ * @notifier: notifier struct to unregister
++ *
++ * This is *not* safe to call from within a preemption notifier.
++ */
++void preempt_notifier_unregister(struct preempt_notifier *notifier)
++{
++ hlist_del(&notifier->link);
++}
++EXPORT_SYMBOL_GPL(preempt_notifier_unregister);
++
++static void __fire_sched_in_preempt_notifiers(struct task_struct *curr)
++{
++ struct preempt_notifier *notifier;
++
++ hlist_for_each_entry(notifier, &curr->preempt_notifiers, link)
++ notifier->ops->sched_in(notifier, raw_smp_processor_id());
++}
++
++static __always_inline void fire_sched_in_preempt_notifiers(struct task_struct *curr)
++{
++ if (static_branch_unlikely(&preempt_notifier_key))
++ __fire_sched_in_preempt_notifiers(curr);
++}
++
++static void
++__fire_sched_out_preempt_notifiers(struct task_struct *curr,
++ struct task_struct *next)
++{
++ struct preempt_notifier *notifier;
++
++ hlist_for_each_entry(notifier, &curr->preempt_notifiers, link)
++ notifier->ops->sched_out(notifier, next);
++}
++
++static __always_inline void
++fire_sched_out_preempt_notifiers(struct task_struct *curr,
++ struct task_struct *next)
++{
++ if (static_branch_unlikely(&preempt_notifier_key))
++ __fire_sched_out_preempt_notifiers(curr, next);
++}
++
++#else /* !CONFIG_PREEMPT_NOTIFIERS */
++
++static inline void fire_sched_in_preempt_notifiers(struct task_struct *curr)
++{
++}
++
++static inline void
++fire_sched_out_preempt_notifiers(struct task_struct *curr,
++ struct task_struct *next)
++{
++}
++
++#endif /* CONFIG_PREEMPT_NOTIFIERS */
++
++static inline void prepare_task(struct task_struct *next)
++{
++ /*
++ * Claim the task as running, we do this before switching to it
++ * such that any running task will have this set.
++ */
++ next->on_cpu = 1;
++}
++
++static inline void finish_task(struct task_struct *prev)
++{
++#ifdef CONFIG_SMP
++ /*
++ * After ->on_cpu is cleared, the task can be moved to a different CPU.
++ * We must ensure this doesn't happen until the switch is completely
++ * finished.
++ *
++ * In particular, the load of prev->state in finish_task_switch() must
++ * happen before this.
++ *
++ * Pairs with the smp_cond_load_acquire() in try_to_wake_up().
++ */
++ smp_store_release(&prev->on_cpu, 0);
++#endif
++}
++
++static inline void
++prepare_lock_switch(struct rq *rq, struct task_struct *next)
++{
++ /*
++ * Since the runqueue lock will be released by the next
++ * task (which is an invalid locking op but in the case
++ * of the scheduler it's an obvious special-case), so we
++ * do an early lockdep release here:
++ */
++ spin_release(&rq->lock->dep_map, 1, _THIS_IP_);
++#ifdef CONFIG_DEBUG_SPINLOCK
++ /* this is a valid case when another task releases the spinlock */
++ rq->lock->owner = next;
++#endif
++}
++
++static inline void finish_lock_switch(struct rq *rq, struct task_struct *prev)
++{
++ /*
++ * If we are tracking spinlock dependencies then we have to
++ * fix up the runqueue lock - which gets 'carried over' from
++ * prev into current:
++ */
++ spin_acquire(&rq->lock->dep_map, 0, 0, _THIS_IP_);
++
++#ifdef CONFIG_SMP
++ /*
++ * If prev was marked as migrating to another CPU in return_task, drop
++ * the local runqueue lock but leave interrupts disabled and grab the
++ * remote lock we're migrating it to before enabling them.
++ */
++ if (unlikely(task_on_rq_migrating(prev))) {
++ sched_info_dequeued(rq, prev);
++ /*
++ * We move the ownership of prev to the new cpu now. ttwu can't
++ * activate prev to the wrong cpu since it has to grab this
++ * runqueue in ttwu_remote.
++ */
++#ifdef CONFIG_THREAD_INFO_IN_TASK
++ prev->cpu = prev->wake_cpu;
++#else
++ task_thread_info(prev)->cpu = prev->wake_cpu;
++#endif
++ raw_spin_unlock(rq->lock);
++
++ raw_spin_lock(&prev->pi_lock);
++ rq = __task_rq_lock(prev, NULL);
++ /* Check that someone else hasn't already queued prev */
++ if (likely(!task_queued(prev))) {
++ enqueue_task(rq, prev, 0);
++ prev->on_rq = TASK_ON_RQ_QUEUED;
++ /* Wake up the CPU if it's not already running */
++ resched_if_idle(rq);
++ }
++ raw_spin_unlock(&prev->pi_lock);
++ }
++#endif
++ rq_unlock(rq);
++
++ do_pending_softirq(rq, current);
++
++ local_irq_enable();
++}
++
++#ifndef prepare_arch_switch
++# define prepare_arch_switch(next) do { } while (0)
++#endif
++#ifndef finish_arch_switch
++# define finish_arch_switch(prev) do { } while (0)
++#endif
++#ifndef finish_arch_post_lock_switch
++# define finish_arch_post_lock_switch() do { } while (0)
++#endif
++
++/**
++ * prepare_task_switch - prepare to switch tasks
++ * @rq: the runqueue preparing to switch
++ * @next: the task we are going to switch to.
++ *
++ * This is called with the rq lock held and interrupts off. It must
++ * be paired with a subsequent finish_task_switch after the context
++ * switch.
++ *
++ * prepare_task_switch sets up locking and calls architecture specific
++ * hooks.
++ */
++static inline void
++prepare_task_switch(struct rq *rq, struct task_struct *prev,
++ struct task_struct *next)
++{
++ kcov_prepare_switch(prev);
++ sched_info_switch(rq, prev, next);
++ perf_event_task_sched_out(prev, next);
++ rseq_preempt(prev);
++ fire_sched_out_preempt_notifiers(prev, next);
++ prepare_task(next);
++ prepare_arch_switch(next);
++}
++
++/**
++ * finish_task_switch - clean up after a task-switch
++ * @rq: runqueue associated with task-switch
++ * @prev: the thread we just switched away from.
++ *
++ * finish_task_switch must be called after the context switch, paired
++ * with a prepare_task_switch call before the context switch.
++ * finish_task_switch will reconcile locking set up by prepare_task_switch,
++ * and do any other architecture-specific cleanup actions.
++ *
++ * Note that we may have delayed dropping an mm in context_switch(). If
++ * so, we finish that here outside of the runqueue lock. (Doing it
++ * with the lock held can cause deadlocks; see schedule() for
++ * details.)
++ *
++ * The context switch have flipped the stack from under us and restored the
++ * local variables which were saved when this task called schedule() in the
++ * past. prev == current is still correct but we need to recalculate this_rq
++ * because prev may have moved to another CPU.
++ */
++static void finish_task_switch(struct task_struct *prev)
++ __releases(rq->lock)
++{
++ struct rq *rq = this_rq();
++ struct mm_struct *mm = rq->prev_mm;
++ long prev_state;
++
++ /*
++ * The previous task will have left us with a preempt_count of 2
++ * because it left us after:
++ *
++ * schedule()
++ * preempt_disable(); // 1
++ * __schedule()
++ * raw_spin_lock_irq(rq->lock) // 2
++ *
++ * Also, see FORK_PREEMPT_COUNT.
++ */
++ if (WARN_ONCE(preempt_count() != 2*PREEMPT_DISABLE_OFFSET,
++ "corrupted preempt_count: %s/%d/0x%x\n",
++ current->comm, current->pid, preempt_count()))
++ preempt_count_set(FORK_PREEMPT_COUNT);
++
++ rq->prev_mm = NULL;
++
++ /*
++ * A task struct has one reference for the use as "current".
++ * If a task dies, then it sets TASK_DEAD in tsk->state and calls
++ * schedule one last time. The schedule call will never return, and
++ * the scheduled task must drop that reference.
++ *
++ * We must observe prev->state before clearing prev->on_cpu (in
++ * finish_task), otherwise a concurrent wakeup can get prev
++ * running on another CPU and we could rave with its RUNNING -> DEAD
++ * transition, resulting in a double drop.
++ */
++ prev_state = prev->state;
++ vtime_task_switch(prev);
++ perf_event_task_sched_in(prev, current);
++ finish_task(prev);
++ finish_lock_switch(rq, prev);
++ finish_arch_post_lock_switch();
++ kcov_finish_switch(current);
++
++ fire_sched_in_preempt_notifiers(current);
++ /*
++ * When switching through a kernel thread, the loop in
++ * membarrier_{private,global}_expedited() may have observed that
++ * kernel thread and not issued an IPI. It is therefore possible to
++ * schedule between user->kernel->user threads without passing though
++ * switch_mm(). Membarrier requires a barrier after storing to
++ * rq->curr, before returning to userspace, so provide them here:
++ *
++ * - a full memory barrier for {PRIVATE,GLOBAL}_EXPEDITED, implicitly
++ * provided by mmdrop(),
++ * - a sync_core for SYNC_CORE.
++ */
++ if (mm) {
++ membarrier_mm_sync_core_before_usermode(mm);
++ mmdrop(mm);
++ }
++ if (unlikely(prev_state == TASK_DEAD)) {
++ /*
++ * Remove function-return probe instances associated with this
++ * task and put them back on the free list.
++ */
++ kprobe_flush_task(prev);
++
++ /* Task is done with its stack. */
++ put_task_stack(prev);
++
++ put_task_struct(prev);
++ }
++}
++
++/**
++ * schedule_tail - first thing a freshly forked thread must call.
++ * @prev: the thread we just switched away from.
++ */
++asmlinkage __visible void schedule_tail(struct task_struct *prev)
++{
++ /*
++ * New tasks start with FORK_PREEMPT_COUNT, see there and
++ * finish_task_switch() for details.
++ *
++ * finish_task_switch() will drop rq->lock() and lower preempt_count
++ * and the preempt_enable() will end up enabling preemption (on
++ * PREEMPT_COUNT kernels).
++ */
++
++ finish_task_switch(prev);
++ preempt_enable();
++
++ if (current->set_child_tid)
++ put_user(task_pid_vnr(current), current->set_child_tid);
++
++ calculate_sigpending();
++}
++
++/*
++ * context_switch - switch to the new MM and the new thread's register state.
++ */
++static __always_inline void
++context_switch(struct rq *rq, struct task_struct *prev,
++ struct task_struct *next)
++{
++ struct mm_struct *mm, *oldmm;
++
++ prepare_task_switch(rq, prev, next);
++
++ mm = next->mm;
++ oldmm = prev->active_mm;
++ /*
++ * For paravirt, this is coupled with an exit in switch_to to
++ * combine the page table reload and the switch backend into
++ * one hypercall.
++ */
++ arch_start_context_switch(prev);
++
++ /*
++ * If mm is non-NULL, we pass through switch_mm(). If mm is
++ * NULL, we will pass through mmdrop() in finish_task_switch().
++ * Both of these contain the full memory barrier required by
++ * membarrier after storing to rq->curr, before returning to
++ * user-space.
++ */
++ if (!mm) {
++ next->active_mm = oldmm;
++ mmgrab(oldmm);
++ enter_lazy_tlb(oldmm, next);
++ } else
++ switch_mm_irqs_off(oldmm, mm, next);
++
++ if (!prev->mm) {
++ prev->active_mm = NULL;
++ rq->prev_mm = oldmm;
++ }
++ prepare_lock_switch(rq, next);
++
++ /* Here we just switch the register state and the stack. */
++ switch_to(prev, next, prev);
++ barrier();
++
++ finish_task_switch(prev);
++}
++
++/*
++ * nr_running, nr_uninterruptible and nr_context_switches:
++ *
++ * externally visible scheduler statistics: current number of runnable
++ * threads, total number of context switches performed since bootup.
++ */
++unsigned long nr_running(void)
++{
++ unsigned long i, sum = 0;
++
++ for_each_online_cpu(i)
++ sum += cpu_rq(i)->nr_running;
++
++ return sum;
++}
++
++static unsigned long nr_uninterruptible(void)
++{
++ unsigned long i, sum = 0;
++
++ for_each_online_cpu(i)
++ sum += cpu_rq(i)->nr_uninterruptible;
++
++ return sum;
++}
++
++/*
++ * Check if only the current task is running on the CPU.
++ *
++ * Caution: this function does not check that the caller has disabled
++ * preemption, thus the result might have a time-of-check-to-time-of-use
++ * race. The caller is responsible to use it correctly, for example:
++ *
++ * - from a non-preemptible section (of course)
++ *
++ * - from a thread that is bound to a single CPU
++ *
++ * - in a loop with very short iterations (e.g. a polling loop)
++ */
++bool single_task_running(void)
++{
++ struct rq *rq = cpu_rq(smp_processor_id());
++
++ if (rq_load(rq) == 1)
++ return true;
++ else
++ return false;
++}
++EXPORT_SYMBOL(single_task_running);
++
++unsigned long long nr_context_switches(void)
++{
++ int i;
++ unsigned long long sum = 0;
++
++ for_each_possible_cpu(i)
++ sum += cpu_rq(i)->nr_switches;
++
++ return sum;
++}
++
++/*
++ * Consumers of these two interfaces, like for example the cpufreq menu
++ * governor are using nonsensical data. Boosting frequency for a CPU that has
++ * IO-wait which might not even end up running the task when it does become
++ * runnable.
++ */
++
++unsigned long nr_iowait_cpu(int cpu)
++{
++ return atomic_read(&cpu_rq(cpu)->nr_iowait);
++}
++
++/*
++ * IO-wait accounting, and how its mostly bollocks (on SMP).
++ *
++ * The idea behind IO-wait account is to account the idle time that we could
++ * have spend running if it were not for IO. That is, if we were to improve the
++ * storage performance, we'd have a proportional reduction in IO-wait time.
++ *
++ * This all works nicely on UP, where, when a task blocks on IO, we account
++ * idle time as IO-wait, because if the storage were faster, it could've been
++ * running and we'd not be idle.
++ *
++ * This has been extended to SMP, by doing the same for each CPU. This however
++ * is broken.
++ *
++ * Imagine for instance the case where two tasks block on one CPU, only the one
++ * CPU will have IO-wait accounted, while the other has regular idle. Even
++ * though, if the storage were faster, both could've ran at the same time,
++ * utilising both CPUs.
++ *
++ * This means, that when looking globally, the current IO-wait accounting on
++ * SMP is a lower bound, by reason of under accounting.
++ *
++ * Worse, since the numbers are provided per CPU, they are sometimes
++ * interpreted per CPU, and that is nonsensical. A blocked task isn't strictly
++ * associated with any one particular CPU, it can wake to another CPU than it
++ * blocked on. This means the per CPU IO-wait number is meaningless.
++ *
++ * Task CPU affinities can make all that even more 'interesting'.
++ */
++
++unsigned long nr_iowait(void)
++{
++ unsigned long i, sum = 0;
++
++ for_each_possible_cpu(i)
++ sum += nr_iowait_cpu(i);
++
++ return sum;
++}
++
++unsigned long nr_active(void)
++{
++ return nr_running() + nr_uninterruptible();
++}
++
++/* Variables and functions for calc_load */
++static unsigned long calc_load_update;
++unsigned long avenrun[3];
++EXPORT_SYMBOL(avenrun);
++
++/**
++ * get_avenrun - get the load average array
++ * @loads: pointer to dest load array
++ * @offset: offset to add
++ * @shift: shift count to shift the result left
++ *
++ * These values are estimates at best, so no need for locking.
++ */
++void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
++{
++ loads[0] = (avenrun[0] + offset) << shift;
++ loads[1] = (avenrun[1] + offset) << shift;
++ loads[2] = (avenrun[2] + offset) << shift;
++}
++
++/*
++ * calc_load - update the avenrun load estimates every LOAD_FREQ seconds.
++ */
++void calc_global_load(unsigned long ticks)
++{
++ long active;
++
++ if (time_before(jiffies, READ_ONCE(calc_load_update)))
++ return;
++ active = nr_active() * FIXED_1;
++
++ avenrun[0] = calc_load(avenrun[0], EXP_1, active);
++ avenrun[1] = calc_load(avenrun[1], EXP_5, active);
++ avenrun[2] = calc_load(avenrun[2], EXP_15, active);
++
++ calc_load_update = jiffies + LOAD_FREQ;
++}
++
++/**
++ * fixed_power_int - compute: x^n, in O(log n) time
++ *
++ * @x: base of the power
++ * @frac_bits: fractional bits of @x
++ * @n: power to raise @x to.
++ *
++ * By exploiting the relation between the definition of the natural power
++ * function: x^n := x*x*...*x (x multiplied by itself for n times), and
++ * the binary encoding of numbers used by computers: n := \Sum n_i * 2^i,
++ * (where: n_i \elem {0, 1}, the binary vector representing n),
++ * we find: x^n := x^(\Sum n_i * 2^i) := \Prod x^(n_i * 2^i), which is
++ * of course trivially computable in O(log_2 n), the length of our binary
++ * vector.
++ */
++static unsigned long
++fixed_power_int(unsigned long x, unsigned int frac_bits, unsigned int n)
++{
++ unsigned long result = 1UL << frac_bits;
++
++ if (n) {
++ for (;;) {
++ if (n & 1) {
++ result *= x;
++ result += 1UL << (frac_bits - 1);
++ result >>= frac_bits;
++ }
++ n >>= 1;
++ if (!n)
++ break;
++ x *= x;
++ x += 1UL << (frac_bits - 1);
++ x >>= frac_bits;
++ }
++ }
++
++ return result;
++}
++
++/*
++ * a1 = a0 * e + a * (1 - e)
++ *
++ * a2 = a1 * e + a * (1 - e)
++ * = (a0 * e + a * (1 - e)) * e + a * (1 - e)
++ * = a0 * e^2 + a * (1 - e) * (1 + e)
++ *
++ * a3 = a2 * e + a * (1 - e)
++ * = (a0 * e^2 + a * (1 - e) * (1 + e)) * e + a * (1 - e)
++ * = a0 * e^3 + a * (1 - e) * (1 + e + e^2)
++ *
++ * ...
++ *
++ * an = a0 * e^n + a * (1 - e) * (1 + e + ... + e^n-1) [1]
++ * = a0 * e^n + a * (1 - e) * (1 - e^n)/(1 - e)
++ * = a0 * e^n + a * (1 - e^n)
++ *
++ * [1] application of the geometric series:
++ *
++ * n 1 - x^(n+1)
++ * S_n := \Sum x^i = -------------
++ * i=0 1 - x
++ */
++unsigned long
++calc_load_n(unsigned long load, unsigned long exp,
++ unsigned long active, unsigned int n)
++{
++ return calc_load(load, fixed_power_int(exp, FSHIFT, n), active);
++}
++
++DEFINE_PER_CPU(struct kernel_stat, kstat);
++DEFINE_PER_CPU(struct kernel_cpustat, kernel_cpustat);
++
++EXPORT_PER_CPU_SYMBOL(kstat);
++EXPORT_PER_CPU_SYMBOL(kernel_cpustat);
++
++#ifdef CONFIG_PARAVIRT
++static inline u64 steal_ticks(u64 steal)
++{
++ if (unlikely(steal > NSEC_PER_SEC))
++ return div_u64(steal, TICK_NSEC);
++
++ return __iter_div_u64_rem(steal, TICK_NSEC, &steal);
++}
++#endif
++
++#ifndef nsecs_to_cputime
++# define nsecs_to_cputime(__nsecs) nsecs_to_jiffies(__nsecs)
++#endif
++
++/*
++ * On each tick, add the number of nanoseconds to the unbanked variables and
++ * once one tick's worth has accumulated, account it allowing for accurate
++ * sub-tick accounting and totals. Use the TICK_APPROX_NS to match the way we
++ * deduct nanoseconds.
++ */
++static void pc_idle_time(struct rq *rq, struct task_struct *idle, unsigned long ns)
++{
++ u64 *cpustat = kcpustat_this_cpu->cpustat;
++ unsigned long ticks;
++
++ if (atomic_read(&rq->nr_iowait) > 0) {
++ rq->iowait_ns += ns;
++ if (rq->iowait_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->iowait_ns);
++ cpustat[CPUTIME_IOWAIT] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->iowait_ns %= JIFFY_NS;
++ }
++ } else {
++ rq->idle_ns += ns;
++ if (rq->idle_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->idle_ns);
++ cpustat[CPUTIME_IDLE] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->idle_ns %= JIFFY_NS;
++ }
++ }
++ acct_update_integrals(idle);
++}
++
++static void pc_system_time(struct rq *rq, struct task_struct *p,
++ int hardirq_offset, unsigned long ns)
++{
++ u64 *cpustat = kcpustat_this_cpu->cpustat;
++ unsigned long ticks;
++
++ p->stime_ns += ns;
++ if (p->stime_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(p->stime_ns);
++ p->stime_ns %= JIFFY_NS;
++ p->stime += (__force u64)TICK_APPROX_NS * ticks;
++ account_group_system_time(p, TICK_APPROX_NS * ticks);
++ }
++ p->sched_time += ns;
++ account_group_exec_runtime(p, ns);
++
++ if (hardirq_count() - hardirq_offset) {
++ rq->irq_ns += ns;
++ if (rq->irq_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->irq_ns);
++ cpustat[CPUTIME_IRQ] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->irq_ns %= JIFFY_NS;
++ }
++ } else if (in_serving_softirq()) {
++ rq->softirq_ns += ns;
++ if (rq->softirq_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->softirq_ns);
++ cpustat[CPUTIME_SOFTIRQ] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->softirq_ns %= JIFFY_NS;
++ }
++ } else {
++ rq->system_ns += ns;
++ if (rq->system_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->system_ns);
++ cpustat[CPUTIME_SYSTEM] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->system_ns %= JIFFY_NS;
++ }
++ }
++ acct_update_integrals(p);
++}
++
++static void pc_user_time(struct rq *rq, struct task_struct *p, unsigned long ns)
++{
++ u64 *cpustat = kcpustat_this_cpu->cpustat;
++ unsigned long ticks;
++
++ p->utime_ns += ns;
++ if (p->utime_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(p->utime_ns);
++ p->utime_ns %= JIFFY_NS;
++ p->utime += (__force u64)TICK_APPROX_NS * ticks;
++ account_group_user_time(p, TICK_APPROX_NS * ticks);
++ }
++ p->sched_time += ns;
++ account_group_exec_runtime(p, ns);
++
++ if (this_cpu_ksoftirqd() == p) {
++ /*
++ * ksoftirqd time do not get accounted in cpu_softirq_time.
++ * So, we have to handle it separately here.
++ */
++ rq->softirq_ns += ns;
++ if (rq->softirq_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->softirq_ns);
++ cpustat[CPUTIME_SOFTIRQ] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->softirq_ns %= JIFFY_NS;
++ }
++ }
++
++ if (task_nice(p) > 0 || idleprio_task(p)) {
++ rq->nice_ns += ns;
++ if (rq->nice_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->nice_ns);
++ cpustat[CPUTIME_NICE] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->nice_ns %= JIFFY_NS;
++ }
++ } else {
++ rq->user_ns += ns;
++ if (rq->user_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->user_ns);
++ cpustat[CPUTIME_USER] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->user_ns %= JIFFY_NS;
++ }
++ }
++ acct_update_integrals(p);
++}
++
++/*
++ * This is called on clock ticks.
++ * Bank in p->sched_time the ns elapsed since the last tick or switch.
++ * CPU scheduler quota accounting is also performed here in microseconds.
++ */
++static void update_cpu_clock_tick(struct rq *rq, struct task_struct *p)
++{
++ s64 account_ns = rq->niffies - p->last_ran;
++ struct task_struct *idle = rq->idle;
++
++ /* Accurate tick timekeeping */
++ if (user_mode(get_irq_regs()))
++ pc_user_time(rq, p, account_ns);
++ else if (p != idle || (irq_count() != HARDIRQ_OFFSET)) {
++ pc_system_time(rq, p, HARDIRQ_OFFSET, account_ns);
++ } else
++ pc_idle_time(rq, idle, account_ns);
++
++ /* time_slice accounting is done in usecs to avoid overflow on 32bit */
++ if (p->policy != SCHED_FIFO && p != idle)
++ p->time_slice -= NS_TO_US(account_ns);
++
++ p->last_ran = rq->niffies;
++}
++
++/*
++ * This is called on context switches.
++ * Bank in p->sched_time the ns elapsed since the last tick or switch.
++ * CPU scheduler quota accounting is also performed here in microseconds.
++ */
++static void update_cpu_clock_switch(struct rq *rq, struct task_struct *p)
++{
++ s64 account_ns = rq->niffies - p->last_ran;
++ struct task_struct *idle = rq->idle;
++
++ /* Accurate subtick timekeeping */
++ if (p != idle)
++ pc_user_time(rq, p, account_ns);
++ else
++ pc_idle_time(rq, idle, account_ns);
++
++ /* time_slice accounting is done in usecs to avoid overflow on 32bit */
++ if (p->policy != SCHED_FIFO && p != idle)
++ p->time_slice -= NS_TO_US(account_ns);
++}
++
++/*
++ * Return any ns on the sched_clock that have not yet been accounted in
++ * @p in case that task is currently running.
++ *
++ * Called with task_rq_lock(p) held.
++ */
++static inline u64 do_task_delta_exec(struct task_struct *p, struct rq *rq)
++{
++ u64 ns = 0;
++
++ /*
++ * Must be ->curr _and_ ->on_rq. If dequeued, we would
++ * project cycles that may never be accounted to this
++ * thread, breaking clock_gettime().
++ */
++ if (p == rq->curr && task_on_rq_queued(p)) {
++ update_clocks(rq);
++ ns = rq->niffies - p->last_ran;
++ }
++
++ return ns;
++}
++
++/*
++ * Return accounted runtime for the task.
++ * Return separately the current's pending runtime that have not been
++ * accounted yet.
++ *
++ */
++unsigned long long task_sched_runtime(struct task_struct *p)
++{
++ struct rq_flags rf;
++ struct rq *rq;
++ u64 ns;
++
++#if defined(CONFIG_64BIT) && defined(CONFIG_SMP)
++ /*
++ * 64-bit doesn't need locks to atomically read a 64-bit value.
++ * So we have a optimisation chance when the task's delta_exec is 0.
++ * Reading ->on_cpu is racy, but this is ok.
++ *
++ * If we race with it leaving CPU, we'll take a lock. So we're correct.
++ * If we race with it entering CPU, unaccounted time is 0. This is
++ * indistinguishable from the read occurring a few cycles earlier.
++ * If we see ->on_cpu without ->on_rq, the task is leaving, and has
++ * been accounted, so we're correct here as well.
++ */
++ if (!p->on_cpu || !task_on_rq_queued(p))
++ return tsk_seruntime(p);
++#endif
++
++ rq = task_rq_lock(p, &rf);
++ ns = p->sched_time + do_task_delta_exec(p, rq);
++ task_rq_unlock(rq, p, &rf);
++
++ return ns;
++}
++
++/*
++ * Functions to test for when SCHED_ISO tasks have used their allocated
++ * quota as real time scheduling and convert them back to SCHED_NORMAL. All
++ * data is modified only by the local runqueue during scheduler_tick with
++ * interrupts disabled.
++ */
++
++/*
++ * Test if SCHED_ISO tasks have run longer than their alloted period as RT
++ * tasks and set the refractory flag if necessary. There is 10% hysteresis
++ * for unsetting the flag. 115/128 is ~90/100 as a fast shift instead of a
++ * slow division.
++ */
++static inline void iso_tick(struct rq *rq)
++{
++ rq->iso_ticks = rq->iso_ticks * (ISO_PERIOD - 1) / ISO_PERIOD;
++ rq->iso_ticks += 100;
++ if (rq->iso_ticks > ISO_PERIOD * sched_iso_cpu) {
++ rq->iso_refractory = true;
++ if (unlikely(rq->iso_ticks > ISO_PERIOD * 100))
++ rq->iso_ticks = ISO_PERIOD * 100;
++ }
++}
++
++/* No SCHED_ISO task was running so decrease rq->iso_ticks */
++static inline void no_iso_tick(struct rq *rq, int ticks)
++{
++ if (rq->iso_ticks > 0 || rq->iso_refractory) {
++ rq->iso_ticks = rq->iso_ticks * (ISO_PERIOD - ticks) / ISO_PERIOD;
++ if (rq->iso_ticks < ISO_PERIOD * (sched_iso_cpu * 115 / 128)) {
++ rq->iso_refractory = false;
++ if (unlikely(rq->iso_ticks < 0))
++ rq->iso_ticks = 0;
++ }
++ }
++}
++
++/* This manages tasks that have run out of timeslice during a scheduler_tick */
++static void task_running_tick(struct rq *rq)
++{
++ struct task_struct *p = rq->curr;
++
++ /*
++ * If a SCHED_ISO task is running we increment the iso_ticks. In
++ * order to prevent SCHED_ISO tasks from causing starvation in the
++ * presence of true RT tasks we account those as iso_ticks as well.
++ */
++ if (rt_task(p) || task_running_iso(p))
++ iso_tick(rq);
++ else
++ no_iso_tick(rq, 1);
++
++ /* SCHED_FIFO tasks never run out of timeslice. */
++ if (p->policy == SCHED_FIFO)
++ return;
++
++ if (iso_task(p)) {
++ if (task_running_iso(p)) {
++ if (rq->iso_refractory) {
++ /*
++ * SCHED_ISO task is running as RT and limit
++ * has been hit. Force it to reschedule as
++ * SCHED_NORMAL by zeroing its time_slice
++ */
++ p->time_slice = 0;
++ }
++ } else if (!rq->iso_refractory) {
++ /* Can now run again ISO. Reschedule to pick up prio */
++ goto out_resched;
++ }
++ }
++
++ /*
++ * Tasks that were scheduled in the first half of a tick are not
++ * allowed to run into the 2nd half of the next tick if they will
++ * run out of time slice in the interim. Otherwise, if they have
++ * less than RESCHED_US μs of time slice left they will be rescheduled.
++ * Dither is used as a backup for when hrexpiry is disabled or high res
++ * timers not configured in.
++ */
++ if (p->time_slice - rq->dither >= RESCHED_US)
++ return;
++out_resched:
++ rq_lock(rq);
++ __set_tsk_resched(p);
++ rq_unlock(rq);
++}
++
++static inline void task_tick(struct rq *rq)
++{
++ if (!rq_idle(rq))
++ task_running_tick(rq);
++ else if (rq->last_jiffy > rq->last_scheduler_tick)
++ no_iso_tick(rq, rq->last_jiffy - rq->last_scheduler_tick);
++}
++
++#ifdef CONFIG_NO_HZ_FULL
++/*
++ * We can stop the timer tick any time highres timers are active since
++ * we rely entirely on highres timeouts for task expiry rescheduling.
++ */
++static void sched_stop_tick(struct rq *rq, int cpu)
++{
++ if (!hrexpiry_enabled(rq))
++ return;
++ if (!tick_nohz_full_enabled())
++ return;
++ if (!tick_nohz_full_cpu(cpu))
++ return;
++ tick_nohz_dep_clear_cpu(cpu, TICK_DEP_BIT_SCHED);
++}
++
++static inline void sched_start_tick(struct rq *rq, int cpu)
++{
++ tick_nohz_dep_set_cpu(cpu, TICK_DEP_BIT_SCHED);
++}
++
++struct tick_work {
++ int cpu;
++ struct delayed_work work;
++};
++
++static struct tick_work __percpu *tick_work_cpu;
++
++static void sched_tick_remote(struct work_struct *work)
++{
++ struct delayed_work *dwork = to_delayed_work(work);
++ struct tick_work *twork = container_of(dwork, struct tick_work, work);
++ int cpu = twork->cpu;
++ struct rq *rq = cpu_rq(cpu);
++ struct task_struct *curr;
++ u64 delta;
++
++ /*
++ * Handle the tick only if it appears the remote CPU is running in full
++ * dynticks mode. The check is racy by nature, but missing a tick or
++ * having one too much is no big deal because the scheduler tick updates
++ * statistics and checks timeslices in a time-independent way, regardless
++ * of when exactly it is running.
++ */
++ if (idle_cpu(cpu) || !tick_nohz_tick_stopped_cpu(cpu))
++ goto out_requeue;
++
++ rq_lock_irq(rq);
++ curr = rq->curr;
++ if (is_idle_task(curr))
++ goto out_unlock;
++
++ update_rq_clock(rq);
++ delta = rq_clock_task(rq) - curr->last_ran;
++
++ /*
++ * Make sure the next tick runs within a reasonable
++ * amount of time.
++ */
++ WARN_ON_ONCE(delta > (u64)NSEC_PER_SEC * 3);
++ task_tick(rq);
++
++out_unlock:
++ rq_unlock_irq(rq, NULL);
++
++out_requeue:
++ /*
++ * Run the remote tick once per second (1Hz). This arbitrary
++ * frequency is large enough to avoid overload but short enough
++ * to keep scheduler internal stats reasonably up to date.
++ */
++ queue_delayed_work(system_unbound_wq, dwork, HZ);
++}
++
++static void sched_tick_start(int cpu)
++{
++ struct tick_work *twork;
++
++ if (housekeeping_cpu(cpu, HK_FLAG_TICK))
++ return;
++
++ WARN_ON_ONCE(!tick_work_cpu);
++
++ twork = per_cpu_ptr(tick_work_cpu, cpu);
++ twork->cpu = cpu;
++ INIT_DELAYED_WORK(&twork->work, sched_tick_remote);
++ queue_delayed_work(system_unbound_wq, &twork->work, HZ);
++}
++
++#ifdef CONFIG_HOTPLUG_CPU
++static void sched_tick_stop(int cpu)
++{
++ struct tick_work *twork;
++
++ if (housekeeping_cpu(cpu, HK_FLAG_TICK))
++ return;
++
++ WARN_ON_ONCE(!tick_work_cpu);
++
++ twork = per_cpu_ptr(tick_work_cpu, cpu);
++ cancel_delayed_work_sync(&twork->work);
++}
++#endif /* CONFIG_HOTPLUG_CPU */
++
++int __init sched_tick_offload_init(void)
++{
++ tick_work_cpu = alloc_percpu(struct tick_work);
++ BUG_ON(!tick_work_cpu);
++
++ return 0;
++}
++
++#else /* !CONFIG_NO_HZ_FULL */
++static inline void sched_stop_tick(struct rq *rq, int cpu) {}
++static inline void sched_start_tick(struct rq *rq, int cpu) {}
++static inline void sched_tick_start(int cpu) { }
++static inline void sched_tick_stop(int cpu) { }
++#endif
++
++/*
++ * This function gets called by the timer code, with HZ frequency.
++ * We call it with interrupts disabled.
++ */
++void scheduler_tick(void)
++{
++ int cpu __maybe_unused = smp_processor_id();
++ struct rq *rq = cpu_rq(cpu);
++
++ sched_clock_tick();
++ update_clocks(rq);
++ update_load_avg(rq, 0);
++ update_cpu_clock_tick(rq, rq->curr);
++ task_tick(rq);
++ rq->last_scheduler_tick = rq->last_jiffy;
++ rq->last_tick = rq->clock;
++ psi_task_tick(rq);
++ perf_event_task_tick();
++ sched_stop_tick(rq, cpu);
++}
++
++#if defined(CONFIG_PREEMPT) && (defined(CONFIG_DEBUG_PREEMPT) || \
++ defined(CONFIG_TRACE_PREEMPT_TOGGLE))
++/*
++ * If the value passed in is equal to the current preempt count
++ * then we just disabled preemption. Start timing the latency.
++ */
++static inline void preempt_latency_start(int val)
++{
++ if (preempt_count() == val) {
++ unsigned long ip = get_lock_parent_ip();
++#ifdef CONFIG_DEBUG_PREEMPT
++ current->preempt_disable_ip = ip;
++#endif
++ trace_preempt_off(CALLER_ADDR0, ip);
++ }
++}
++
++void preempt_count_add(int val)
++{
++#ifdef CONFIG_DEBUG_PREEMPT
++ /*
++ * Underflow?
++ */
++ if (DEBUG_LOCKS_WARN_ON((preempt_count() < 0)))
++ return;
++#endif
++ __preempt_count_add(val);
++#ifdef CONFIG_DEBUG_PREEMPT
++ /*
++ * Spinlock count overflowing soon?
++ */
++ DEBUG_LOCKS_WARN_ON((preempt_count() & PREEMPT_MASK) >=
++ PREEMPT_MASK - 10);
++#endif
++ preempt_latency_start(val);
++}
++EXPORT_SYMBOL(preempt_count_add);
++NOKPROBE_SYMBOL(preempt_count_add);
++
++/*
++ * If the value passed in equals to the current preempt count
++ * then we just enabled preemption. Stop timing the latency.
++ */
++static inline void preempt_latency_stop(int val)
++{
++ if (preempt_count() == val)
++ trace_preempt_on(CALLER_ADDR0, get_lock_parent_ip());
++}
++
++void preempt_count_sub(int val)
++{
++#ifdef CONFIG_DEBUG_PREEMPT
++ /*
++ * Underflow?
++ */
++ if (DEBUG_LOCKS_WARN_ON(val > preempt_count()))
++ return;
++ /*
++ * Is the spinlock portion underflowing?
++ */
++ if (DEBUG_LOCKS_WARN_ON((val < PREEMPT_MASK) &&
++ !(preempt_count() & PREEMPT_MASK)))
++ return;
++#endif
++
++ preempt_latency_stop(val);
++ __preempt_count_sub(val);
++}
++EXPORT_SYMBOL(preempt_count_sub);
++NOKPROBE_SYMBOL(preempt_count_sub);
++
++#else
++static inline void preempt_latency_start(int val) { }
++static inline void preempt_latency_stop(int val) { }
++#endif
++
++static inline unsigned long get_preempt_disable_ip(struct task_struct *p)
++{
++#ifdef CONFIG_DEBUG_PREEMPT
++ return p->preempt_disable_ip;
++#else
++ return 0;
++#endif
++}
++
++/*
++ * The time_slice is only refilled when it is empty and that is when we set a
++ * new deadline. Make sure update_clocks has been called recently to update
++ * rq->niffies.
++ */
++static void time_slice_expired(struct task_struct *p, struct rq *rq)
++{
++ p->time_slice = timeslice();
++ p->deadline = rq->niffies + task_deadline_diff(p);
++#ifdef CONFIG_SMT_NICE
++ if (!p->mm)
++ p->smt_bias = 0;
++ else if (rt_task(p))
++ p->smt_bias = 1 << 30;
++ else if (task_running_iso(p))
++ p->smt_bias = 1 << 29;
++ else if (idleprio_task(p)) {
++ if (task_running_idle(p))
++ p->smt_bias = 0;
++ else
++ p->smt_bias = 1;
++ } else if (--p->smt_bias < 1)
++ p->smt_bias = MAX_PRIO - p->static_prio;
++#endif
++}
++
++/*
++ * Timeslices below RESCHED_US are considered as good as expired as there's no
++ * point rescheduling when there's so little time left. SCHED_BATCH tasks
++ * have been flagged be not latency sensitive and likely to be fully CPU
++ * bound so every time they're rescheduled they have their time_slice
++ * refilled, but get a new later deadline to have little effect on
++ * SCHED_NORMAL tasks.
++
++ */
++static inline void check_deadline(struct task_struct *p, struct rq *rq)
++{
++ if (p->time_slice < RESCHED_US || batch_task(p))
++ time_slice_expired(p, rq);
++}
++
++/*
++ * Task selection with skiplists is a simple matter of picking off the first
++ * task in the sorted list, an O(1) operation. The lookup is amortised O(1)
++ * being bound to the number of processors.
++ *
++ * Runqueues are selectively locked based on their unlocked data and then
++ * unlocked if not needed. At most 3 locks will be held at any time and are
++ * released as soon as they're no longer needed. All balancing between CPUs
++ * is thus done here in an extremely simple first come best fit manner.
++ *
++ * This iterates over runqueues in cache locality order. In interactive mode
++ * it iterates over all CPUs and finds the task with the best key/deadline.
++ * In non-interactive mode it will only take a task if it's from the current
++ * runqueue or a runqueue with more tasks than the current one with a better
++ * key/deadline.
++ */
++#ifdef CONFIG_SMP
++static inline struct task_struct
++*earliest_deadline_task(struct rq *rq, int cpu, struct task_struct *idle)
++{
++ struct rq *locked = NULL, *chosen = NULL;
++ struct task_struct *edt = idle;
++ int i, best_entries = 0;
++ u64 best_key = ~0ULL;
++
++ for (i = 0; i < total_runqueues; i++) {
++ struct rq *other_rq = rq_order(rq, i);
++ skiplist_node *next;
++ int entries;
++
++ entries = other_rq->sl->entries;
++ /*
++ * Check for queued entres lockless first. The local runqueue
++ * is locked so entries will always be accurate.
++ */
++ if (!sched_interactive) {
++ /*
++ * Don't reschedule balance across nodes unless the CPU
++ * is idle.
++ */
++ if (edt != idle && rq->cpu_locality[other_rq->cpu] > 3)
++ break;
++ if (entries <= best_entries)
++ continue;
++ } else if (!entries)
++ continue;
++
++ /* if (i) implies other_rq != rq */
++ if (i) {
++ /* Check for best id queued lockless first */
++ if (other_rq->best_key >= best_key)
++ continue;
++
++ if (unlikely(!trylock_rq(rq, other_rq)))
++ continue;
++
++ /* Need to reevaluate entries after locking */
++ entries = other_rq->sl->entries;
++ if (unlikely(!entries)) {
++ unlock_rq(other_rq);
++ continue;
++ }
++ }
++
++ next = other_rq->node;
++ /*
++ * In interactive mode we check beyond the best entry on other
++ * runqueues if we can't get the best for smt or affinity
++ * reasons.
++ */
++ while ((next = next->next[0]) != other_rq->node) {
++ struct task_struct *p;
++ u64 key = next->key;
++
++ /* Reevaluate key after locking */
++ if (key >= best_key)
++ break;
++
++ p = next->value;
++ if (!smt_schedule(p, rq)) {
++ if (i && !sched_interactive)
++ break;
++ continue;
++ }
++
++ if (sched_other_cpu(p, cpu)) {
++ if (sched_interactive || !i)
++ continue;
++ break;
++ }
++ /* Make sure affinity is ok */
++ if (i) {
++ /* From this point on p is the best so far */
++ if (locked)
++ unlock_rq(locked);
++ chosen = locked = other_rq;
++ }
++ best_entries = entries;
++ best_key = key;
++ edt = p;
++ break;
++ }
++ /* rq->preempting is a hint only as the state may have changed
++ * since it was set with the resched call but if we have met
++ * the condition we can break out here. */
++ if (edt == rq->preempting)
++ break;
++ if (i && other_rq != chosen)
++ unlock_rq(other_rq);
++ }
++
++ if (likely(edt != idle))
++ take_task(rq, cpu, edt);
++
++ if (locked)
++ unlock_rq(locked);
++
++ rq->preempting = NULL;
++
++ return edt;
++}
++#else /* CONFIG_SMP */
++static inline struct task_struct
++*earliest_deadline_task(struct rq *rq, int cpu, struct task_struct *idle)
++{
++ struct task_struct *edt;
++
++ if (unlikely(!rq->sl->entries))
++ return idle;
++ edt = rq->node->next[0]->value;
++ take_task(rq, cpu, edt);
++ return edt;
++}
++#endif /* CONFIG_SMP */
++
++/*
++ * Print scheduling while atomic bug:
++ */
++static noinline void __schedule_bug(struct task_struct *prev)
++{
++ /* Save this before calling printk(), since that will clobber it */
++ unsigned long preempt_disable_ip = get_preempt_disable_ip(current);
++
++ if (oops_in_progress)
++ return;
++
++ printk(KERN_ERR "BUG: scheduling while atomic: %s/%d/0x%08x\n",
++ prev->comm, prev->pid, preempt_count());
++
++ debug_show_held_locks(prev);
++ print_modules();
++ if (irqs_disabled())
++ print_irqtrace_events(prev);
++ if (IS_ENABLED(CONFIG_DEBUG_PREEMPT)
++ && in_atomic_preempt_off()) {
++ pr_err("Preemption disabled at:");
++ print_ip_sym(preempt_disable_ip);
++ pr_cont("\n");
++ }
++ dump_stack();
++ add_taint(TAINT_WARN, LOCKDEP_STILL_OK);
++}
++
++/*
++ * Various schedule()-time debugging checks and statistics:
++ */
++static inline void schedule_debug(struct task_struct *prev)
++{
++#ifdef CONFIG_SCHED_STACK_END_CHECK
++ if (task_stack_end_corrupted(prev))
++ panic("corrupted stack end detected inside scheduler\n");
++#endif
++
++ if (unlikely(in_atomic_preempt_off())) {
++ __schedule_bug(prev);
++ preempt_count_set(PREEMPT_DISABLED);
++ }
++ rcu_sleep_check();
++
++ profile_hit(SCHED_PROFILING, __builtin_return_address(0));
++
++ schedstat_inc(this_rq()->sched_count);
++}
++
++/*
++ * The currently running task's information is all stored in rq local data
++ * which is only modified by the local CPU.
++ */
++static inline void set_rq_task(struct rq *rq, struct task_struct *p)
++{
++ if (p == rq->idle || p->policy == SCHED_FIFO)
++ hrexpiry_clear(rq);
++ else
++ hrexpiry_start(rq, US_TO_NS(p->time_slice));
++ if (rq->clock - rq->last_tick > HALF_JIFFY_NS)
++ rq->dither = 0;
++ else
++ rq->dither = rq_dither(rq);
++
++ rq->rq_deadline = p->deadline;
++ rq->rq_prio = p->prio;
++#ifdef CONFIG_SMT_NICE
++ rq->rq_mm = p->mm;
++ rq->rq_smt_bias = p->smt_bias;
++#endif
++}
++
++#ifdef CONFIG_SMT_NICE
++static void check_no_siblings(struct rq __maybe_unused *this_rq) {}
++static void wake_no_siblings(struct rq __maybe_unused *this_rq) {}
++static void (*check_siblings)(struct rq *this_rq) = &check_no_siblings;
++static void (*wake_siblings)(struct rq *this_rq) = &wake_no_siblings;
++
++/* Iterate over smt siblings when we've scheduled a process on cpu and decide
++ * whether they should continue running or be descheduled. */
++static void check_smt_siblings(struct rq *this_rq)
++{
++ int other_cpu;
++
++ for_each_cpu(other_cpu, &this_rq->thread_mask) {
++ struct task_struct *p;
++ struct rq *rq;
++
++ rq = cpu_rq(other_cpu);
++ if (rq_idle(rq))
++ continue;
++ p = rq->curr;
++ if (!smt_schedule(p, this_rq))
++ resched_curr(rq);
++ }
++}
++
++static void wake_smt_siblings(struct rq *this_rq)
++{
++ int other_cpu;
++
++ for_each_cpu(other_cpu, &this_rq->thread_mask) {
++ struct rq *rq;
++
++ rq = cpu_rq(other_cpu);
++ if (rq_idle(rq))
++ resched_idle(rq);
++ }
++}
++#else
++static void check_siblings(struct rq __maybe_unused *this_rq) {}
++static void wake_siblings(struct rq __maybe_unused *this_rq) {}
++#endif
++
++/*
++ * schedule() is the main scheduler function.
++ *
++ * The main means of driving the scheduler and thus entering this function are:
++ *
++ * 1. Explicit blocking: mutex, semaphore, waitqueue, etc.
++ *
++ * 2. TIF_NEED_RESCHED flag is checked on interrupt and userspace return
++ * paths. For example, see arch/x86/entry_64.S.
++ *
++ * To drive preemption between tasks, the scheduler sets the flag in timer
++ * interrupt handler scheduler_tick().
++ *
++ * 3. Wakeups don't really cause entry into schedule(). They add a
++ * task to the run-queue and that's it.
++ *
++ * Now, if the new task added to the run-queue preempts the current
++ * task, then the wakeup sets TIF_NEED_RESCHED and schedule() gets
++ * called on the nearest possible occasion:
++ *
++ * - If the kernel is preemptible (CONFIG_PREEMPT=y):
++ *
++ * - in syscall or exception context, at the next outmost
++ * preempt_enable(). (this might be as soon as the wake_up()'s
++ * spin_unlock()!)
++ *
++ * - in IRQ context, return from interrupt-handler to
++ * preemptible context
++ *
++ * - If the kernel is not preemptible (CONFIG_PREEMPT is not set)
++ * then at the next:
++ *
++ * - cond_resched() call
++ * - explicit schedule() call
++ * - return from syscall or exception to user-space
++ * - return from interrupt-handler to user-space
++ *
++ * WARNING: must be called with preemption disabled!
++ */
++static void __sched notrace __schedule(bool preempt)
++{
++ struct task_struct *prev, *next, *idle;
++ unsigned long *switch_count;
++ bool deactivate = false;
++ struct rq *rq;
++ u64 niffies;
++ int cpu;
++
++ cpu = smp_processor_id();
++ rq = cpu_rq(cpu);
++ prev = rq->curr;
++ idle = rq->idle;
++
++ schedule_debug(prev);
++
++ local_irq_disable();
++ rcu_note_context_switch(preempt);
++
++ /*
++ * Make sure that signal_pending_state()->signal_pending() below
++ * can't be reordered with __set_current_state(TASK_INTERRUPTIBLE)
++ * done by the caller to avoid the race with signal_wake_up().
++ *
++ * The membarrier system call requires a full memory barrier
++ * after coming from user-space, before storing to rq->curr.
++ */
++ rq_lock(rq);
++ smp_mb__after_spinlock();
++#ifdef CONFIG_SMP
++ if (rq->preempt) {
++ /*
++ * Make sure resched_curr hasn't triggered a preemption
++ * locklessly on a task that has since scheduled away. Spurious
++ * wakeup of idle is okay though.
++ */
++ if (unlikely(preempt && prev != idle && !test_tsk_need_resched(prev))) {
++ rq->preempt = NULL;
++ clear_preempt_need_resched();
++ rq_unlock_irq(rq, NULL);
++ return;
++ }
++ rq->preempt = NULL;
++ }
++#endif
++
++ switch_count = &prev->nivcsw;
++ if (!preempt && prev->state) {
++ if (signal_pending_state(prev->state, prev)) {
++ prev->state = TASK_RUNNING;
++ } else {
++ deactivate = true;
++ prev->on_rq = 0;
++
++ if (prev->in_iowait) {
++ atomic_inc(&rq->nr_iowait);
++ delayacct_blkio_start();
++ }
++
++ /*
++ * If a worker is going to sleep, notify and
++ * ask workqueue whether it wants to wake up a
++ * task to maintain concurrency. If so, wake
++ * up the task.
++ */
++ if (prev->flags & PF_WQ_WORKER) {
++ struct task_struct *to_wakeup;
++
++ to_wakeup = wq_worker_sleeping(prev);
++ if (to_wakeup)
++ try_to_wake_up_local(to_wakeup);
++ }
++ }
++ switch_count = &prev->nvcsw;
++ }
++
++ /*
++ * Store the niffy value here for use by the next task's last_ran
++ * below to avoid losing niffies due to update_clocks being called
++ * again after this point.
++ */
++ update_clocks(rq);
++ niffies = rq->niffies;
++ update_cpu_clock_switch(rq, prev);
++
++ clear_tsk_need_resched(prev);
++ clear_preempt_need_resched();
++
++ if (idle != prev) {
++ check_deadline(prev, rq);
++ return_task(prev, rq, cpu, deactivate);
++ }
++
++ next = earliest_deadline_task(rq, cpu, idle);
++ if (likely(next->prio != PRIO_LIMIT))
++ clear_cpuidle_map(cpu);
++ else {
++ set_cpuidle_map(cpu);
++ update_load_avg(rq, 0);
++ }
++
++ set_rq_task(rq, next);
++ next->last_ran = niffies;
++
++ if (likely(prev != next)) {
++ /*
++ * Don't reschedule an idle task or deactivated tasks
++ */
++ if (prev == idle) {
++ rq->nr_running++;
++ if (rt_task(next))
++ rq->rt_nr_running++;
++ } else if (!deactivate)
++ resched_suitable_idle(prev);
++ if (unlikely(next == idle)) {
++ rq->nr_running--;
++ if (rt_task(prev))
++ rq->rt_nr_running--;
++ wake_siblings(rq);
++ } else
++ check_siblings(rq);
++ rq->nr_switches++;
++ rq->curr = next;
++ /*
++ * The membarrier system call requires each architecture
++ * to have a full memory barrier after updating
++ * rq->curr, before returning to user-space.
++ *
++ * Here are the schemes providing that barrier on the
++ * various architectures:
++ * - mm ? switch_mm() : mmdrop() for x86, s390, sparc, PowerPC.
++ * switch_mm() rely on membarrier_arch_switch_mm() on PowerPC.
++ * - finish_lock_switch() for weakly-ordered
++ * architectures where spin_unlock is a full barrier,
++ * - switch_to() for arm64 (weakly-ordered, spin_unlock
++ * is a RELEASE barrier),
++ */
++ ++*switch_count;
++
++ trace_sched_switch(preempt, prev, next);
++ context_switch(rq, prev, next); /* unlocks the rq */
++ } else {
++ check_siblings(rq);
++ rq_unlock(rq);
++ do_pending_softirq(rq, next);
++ local_irq_enable();
++ }
++}
++
++void __noreturn do_task_dead(void)
++{
++ /* Causes final put_task_struct in finish_task_switch(). */
++ set_special_state(TASK_DEAD);
++
++ /* Tell freezer to ignore us: */
++ current->flags |= PF_NOFREEZE;
++ __schedule(false);
++ BUG();
++
++ /* Avoid "noreturn function does return" - but don't continue if BUG() is a NOP: */
++ for (;;)
++ cpu_relax();
++}
++
++static inline void sched_submit_work(struct task_struct *tsk)
++{
++ if (!tsk->state || tsk_is_pi_blocked(tsk) ||
++ preempt_count() ||
++ signal_pending_state(tsk->state, tsk))
++ return;
++
++ /*
++ * If we are going to sleep and we have plugged IO queued,
++ * make sure to submit it to avoid deadlocks.
++ */
++ if (blk_needs_flush_plug(tsk))
++ blk_schedule_flush_plug(tsk);
++}
++
++asmlinkage __visible void __sched schedule(void)
++{
++ struct task_struct *tsk = current;
++
++ sched_submit_work(tsk);
++ do {
++ preempt_disable();
++ __schedule(false);
++ sched_preempt_enable_no_resched();
++ } while (need_resched());
++}
++
++EXPORT_SYMBOL(schedule);
++
++/*
++ * synchronize_rcu_tasks() makes sure that no task is stuck in preempted
++ * state (have scheduled out non-voluntarily) by making sure that all
++ * tasks have either left the run queue or have gone into user space.
++ * As idle tasks do not do either, they must not ever be preempted
++ * (schedule out non-voluntarily).
++ *
++ * schedule_idle() is similar to schedule_preempt_disable() except that it
++ * never enables preemption because it does not call sched_submit_work().
++ */
++void __sched schedule_idle(void)
++{
++ /*
++ * As this skips calling sched_submit_work(), which the idle task does
++ * regardless because that function is a nop when the task is in a
++ * TASK_RUNNING state, make sure this isn't used someplace that the
++ * current task can be in any other state. Note, idle is always in the
++ * TASK_RUNNING state.
++ */
++ WARN_ON_ONCE(current->state);
++ do {
++ __schedule(false);
++ } while (need_resched());
++}
++
++#ifdef CONFIG_CONTEXT_TRACKING
++asmlinkage __visible void __sched schedule_user(void)
++{
++ /*
++ * If we come here after a random call to set_need_resched(),
++ * or we have been woken up remotely but the IPI has not yet arrived,
++ * we haven't yet exited the RCU idle mode. Do it here manually until
++ * we find a better solution.
++ *
++ * NB: There are buggy callers of this function. Ideally we
++ * should warn if prev_state != IN_USER, but that will trigger
++ * too frequently to make sense yet.
++ */
++ enum ctx_state prev_state = exception_enter();
++ schedule();
++ exception_exit(prev_state);
++}
++#endif
++
++/**
++ * schedule_preempt_disabled - called with preemption disabled
++ *
++ * Returns with preemption disabled. Note: preempt_count must be 1
++ */
++void __sched schedule_preempt_disabled(void)
++{
++ sched_preempt_enable_no_resched();
++ schedule();
++ preempt_disable();
++}
++
++static void __sched notrace preempt_schedule_common(void)
++{
++ do {
++ /*
++ * Because the function tracer can trace preempt_count_sub()
++ * and it also uses preempt_enable/disable_notrace(), if
++ * NEED_RESCHED is set, the preempt_enable_notrace() called
++ * by the function tracer will call this function again and
++ * cause infinite recursion.
++ *
++ * Preemption must be disabled here before the function
++ * tracer can trace. Break up preempt_disable() into two
++ * calls. One to disable preemption without fear of being
++ * traced. The other to still record the preemption latency,
++ * which can also be traced by the function tracer.
++ */
++ preempt_disable_notrace();
++ preempt_latency_start(1);
++ __schedule(true);
++ preempt_latency_stop(1);
++ preempt_enable_no_resched_notrace();
++
++ /*
++ * Check again in case we missed a preemption opportunity
++ * between schedule and now.
++ */
++ } while (need_resched());
++}
++
++#ifdef CONFIG_PREEMPT
++/*
++ * this is the entry point to schedule() from in-kernel preemption
++ * off of preempt_enable. Kernel preemptions off return from interrupt
++ * occur there and call schedule directly.
++ */
++asmlinkage __visible void __sched notrace preempt_schedule(void)
++{
++ /*
++ * If there is a non-zero preempt_count or interrupts are disabled,
++ * we do not want to preempt the current task. Just return..
++ */
++ if (likely(!preemptible()))
++ return;
++
++ preempt_schedule_common();
++}
++NOKPROBE_SYMBOL(preempt_schedule);
++EXPORT_SYMBOL(preempt_schedule);
++
++/**
++ * preempt_schedule_notrace - preempt_schedule called by tracing
++ *
++ * The tracing infrastructure uses preempt_enable_notrace to prevent
++ * recursion and tracing preempt enabling caused by the tracing
++ * infrastructure itself. But as tracing can happen in areas coming
++ * from userspace or just about to enter userspace, a preempt enable
++ * can occur before user_exit() is called. This will cause the scheduler
++ * to be called when the system is still in usermode.
++ *
++ * To prevent this, the preempt_enable_notrace will use this function
++ * instead of preempt_schedule() to exit user context if needed before
++ * calling the scheduler.
++ */
++asmlinkage __visible void __sched notrace preempt_schedule_notrace(void)
++{
++ enum ctx_state prev_ctx;
++
++ if (likely(!preemptible()))
++ return;
++
++ do {
++ /*
++ * Because the function tracer can trace preempt_count_sub()
++ * and it also uses preempt_enable/disable_notrace(), if
++ * NEED_RESCHED is set, the preempt_enable_notrace() called
++ * by the function tracer will call this function again and
++ * cause infinite recursion.
++ *
++ * Preemption must be disabled here before the function
++ * tracer can trace. Break up preempt_disable() into two
++ * calls. One to disable preemption without fear of being
++ * traced. The other to still record the preemption latency,
++ * which can also be traced by the function tracer.
++ */
++ preempt_disable_notrace();
++ preempt_latency_start(1);
++ /*
++ * Needs preempt disabled in case user_exit() is traced
++ * and the tracer calls preempt_enable_notrace() causing
++ * an infinite recursion.
++ */
++ prev_ctx = exception_enter();
++ __schedule(true);
++ exception_exit(prev_ctx);
++
++ preempt_latency_stop(1);
++ preempt_enable_no_resched_notrace();
++ } while (need_resched());
++}
++EXPORT_SYMBOL_GPL(preempt_schedule_notrace);
++
++#endif /* CONFIG_PREEMPT */
++
++/*
++ * this is the entry point to schedule() from kernel preemption
++ * off of irq context.
++ * Note, that this is called and return with irqs disabled. This will
++ * protect us against recursive calling from irq.
++ */
++asmlinkage __visible void __sched preempt_schedule_irq(void)
++{
++ enum ctx_state prev_state;
++
++ /* Catch callers which need to be fixed */
++ BUG_ON(preempt_count() || !irqs_disabled());
++
++ prev_state = exception_enter();
++
++ do {
++ preempt_disable();
++ local_irq_enable();
++ __schedule(true);
++ local_irq_disable();
++ sched_preempt_enable_no_resched();
++ } while (need_resched());
++
++ exception_exit(prev_state);
++}
++
++int default_wake_function(wait_queue_entry_t *curr, unsigned mode, int wake_flags,
++ void *key)
++{
++ return try_to_wake_up(curr->private, mode, wake_flags);
++}
++EXPORT_SYMBOL(default_wake_function);
++
++#ifdef CONFIG_RT_MUTEXES
++
++static inline int __rt_effective_prio(struct task_struct *pi_task, int prio)
++{
++ if (pi_task)
++ prio = min(prio, pi_task->prio);
++
++ return prio;
++}
++
++static inline int rt_effective_prio(struct task_struct *p, int prio)
++{
++ struct task_struct *pi_task = rt_mutex_get_top_task(p);
++
++ return __rt_effective_prio(pi_task, prio);
++}
++
++/*
++ * rt_mutex_setprio - set the current priority of a task
++ * @p: task to boost
++ * @pi_task: donor task
++ *
++ * This function changes the 'effective' priority of a task. It does
++ * not touch ->normal_prio like __setscheduler().
++ *
++ * Used by the rt_mutex code to implement priority inheritance
++ * logic. Call site only calls if the priority of the task changed.
++ */
++void rt_mutex_setprio(struct task_struct *p, struct task_struct *pi_task)
++{
++ int prio, oldprio;
++ struct rq *rq;
++
++ /* XXX used to be waiter->prio, not waiter->task->prio */
++ prio = __rt_effective_prio(pi_task, p->normal_prio);
++
++ /*
++ * If nothing changed; bail early.
++ */
++ if (p->pi_top_task == pi_task && prio == p->prio)
++ return;
++
++ rq = __task_rq_lock(p, NULL);
++ update_rq_clock(rq);
++ /*
++ * Set under pi_lock && rq->lock, such that the value can be used under
++ * either lock.
++ *
++ * Note that there is loads of tricky to make this pointer cache work
++ * right. rt_mutex_slowunlock()+rt_mutex_postunlock() work together to
++ * ensure a task is de-boosted (pi_task is set to NULL) before the
++ * task is allowed to run again (and can exit). This ensures the pointer
++ * points to a blocked task -- which guaratees the task is present.
++ */
++ p->pi_top_task = pi_task;
++
++ /*
++ * For FIFO/RR we only need to set prio, if that matches we're done.
++ */
++ if (prio == p->prio)
++ goto out_unlock;
++
++ /*
++ * Idle task boosting is a nono in general. There is one
++ * exception, when PREEMPT_RT and NOHZ is active:
++ *
++ * The idle task calls get_next_timer_interrupt() and holds
++ * the timer wheel base->lock on the CPU and another CPU wants
++ * to access the timer (probably to cancel it). We can safely
++ * ignore the boosting request, as the idle CPU runs this code
++ * with interrupts disabled and will complete the lock
++ * protected section without being interrupted. So there is no
++ * real need to boost.
++ */
++ if (unlikely(p == rq->idle)) {
++ WARN_ON(p != rq->curr);
++ WARN_ON(p->pi_blocked_on);
++ goto out_unlock;
++ }
++
++ trace_sched_pi_setprio(p, pi_task);
++ oldprio = p->prio;
++ p->prio = prio;
++ if (task_running(rq, p)){
++ if (prio > oldprio)
++ resched_task(p);
++ } else if (task_queued(p)) {
++ dequeue_task(rq, p, DEQUEUE_SAVE);
++ enqueue_task(rq, p, ENQUEUE_RESTORE);
++ if (prio < oldprio)
++ try_preempt(p, rq);
++ }
++out_unlock:
++ __task_rq_unlock(rq, NULL);
++}
++#else
++static inline int rt_effective_prio(struct task_struct *p, int prio)
++{
++ return prio;
++}
++#endif
++
++/*
++ * Adjust the deadline for when the priority is to change, before it's
++ * changed.
++ */
++static inline void adjust_deadline(struct task_struct *p, int new_prio)
++{
++ p->deadline += static_deadline_diff(new_prio) - task_deadline_diff(p);
++}
++
++void set_user_nice(struct task_struct *p, long nice)
++{
++ int new_static, old_static;
++ struct rq_flags rf;
++ struct rq *rq;
++
++ if (task_nice(p) == nice || nice < MIN_NICE || nice > MAX_NICE)
++ return;
++ new_static = NICE_TO_PRIO(nice);
++ /*
++ * We have to be careful, if called from sys_setpriority(),
++ * the task might be in the middle of scheduling on another CPU.
++ */
++ rq = task_rq_lock(p, &rf);
++ update_rq_clock(rq);
++
++ /*
++ * The RT priorities are set via sched_setscheduler(), but we still
++ * allow the 'normal' nice value to be set - but as expected
++ * it wont have any effect on scheduling until the task is
++ * not SCHED_NORMAL/SCHED_BATCH:
++ */
++ if (has_rt_policy(p)) {
++ p->static_prio = new_static;
++ goto out_unlock;
++ }
++
++ adjust_deadline(p, new_static);
++ old_static = p->static_prio;
++ p->static_prio = new_static;
++ p->prio = effective_prio(p);
++
++ if (task_queued(p)) {
++ dequeue_task(rq, p, DEQUEUE_SAVE);
++ enqueue_task(rq, p, ENQUEUE_RESTORE);
++ if (new_static < old_static)
++ try_preempt(p, rq);
++ } else if (task_running(rq, p)) {
++ set_rq_task(rq, p);
++ if (old_static < new_static)
++ resched_task(p);
++ }
++out_unlock:
++ task_rq_unlock(rq, p, &rf);
++}
++EXPORT_SYMBOL(set_user_nice);
++
++/*
++ * can_nice - check if a task can reduce its nice value
++ * @p: task
++ * @nice: nice value
++ */
++int can_nice(const struct task_struct *p, const int nice)
++{
++ /* Convert nice value [19,-20] to rlimit style value [1,40] */
++ int nice_rlim = nice_to_rlimit(nice);
++
++ return (nice_rlim <= task_rlimit(p, RLIMIT_NICE) ||
++ capable(CAP_SYS_NICE));
++}
++
++#ifdef __ARCH_WANT_SYS_NICE
++
++/*
++ * sys_nice - change the priority of the current process.
++ * @increment: priority increment
++ *
++ * sys_setpriority is a more generic, but much slower function that
++ * does similar things.
++ */
++SYSCALL_DEFINE1(nice, int, increment)
++{
++ long nice, retval;
++
++ /*
++ * Setpriority might change our priority at the same moment.
++ * We don't have to worry. Conceptually one call occurs first
++ * and we have a single winner.
++ */
++
++ increment = clamp(increment, -NICE_WIDTH, NICE_WIDTH);
++ nice = task_nice(current) + increment;
++
++ nice = clamp_val(nice, MIN_NICE, MAX_NICE);
++ if (increment < 0 && !can_nice(current, nice))
++ return -EPERM;
++
++ retval = security_task_setnice(current, nice);
++ if (retval)
++ return retval;
++
++ set_user_nice(current, nice);
++ return 0;
++}
++
++#endif
++
++/**
++ * task_prio - return the priority value of a given task.
++ * @p: the task in question.
++ *
++ * Return: The priority value as seen by users in /proc.
++ * RT tasks are offset by -100. Normal tasks are centered around 1, value goes
++ * from 0 (SCHED_ISO) up to 82 (nice +19 SCHED_IDLEPRIO).
++ */
++int task_prio(const struct task_struct *p)
++{
++ int delta, prio = p->prio - MAX_RT_PRIO;
++
++ /* rt tasks and iso tasks */
++ if (prio <= 0)
++ goto out;
++
++ /* Convert to ms to avoid overflows */
++ delta = NS_TO_MS(p->deadline - task_rq(p)->niffies);
++ if (unlikely(delta < 0))
++ delta = 0;
++ delta = delta * 40 / ms_longest_deadline_diff();
++ if (delta <= 80)
++ prio += delta;
++ if (idleprio_task(p))
++ prio += 40;
++out:
++ return prio;
++}
++
++/**
++ * idle_cpu - is a given CPU idle currently?
++ * @cpu: the processor in question.
++ *
++ * Return: 1 if the CPU is currently idle. 0 otherwise.
++ */
++int idle_cpu(int cpu)
++{
++ return cpu_curr(cpu) == cpu_rq(cpu)->idle;
++}
++
++/**
++ * available_idle_cpu - is a given CPU idle for enqueuing work.
++ * @cpu: the CPU in question.
++ *
++ * Return: 1 if the CPU is currently idle. 0 otherwise.
++ */
++int available_idle_cpu(int cpu)
++{
++ if (!idle_cpu(cpu))
++ return 0;
++
++ if (vcpu_is_preempted(cpu))
++ return 0;
++
++ return 1;
++}
++
++/**
++ * idle_task - return the idle task for a given CPU.
++ * @cpu: the processor in question.
++ *
++ * Return: The idle task for the CPU @cpu.
++ */
++struct task_struct *idle_task(int cpu)
++{
++ return cpu_rq(cpu)->idle;
++}
++
++/**
++ * find_process_by_pid - find a process with a matching PID value.
++ * @pid: the pid in question.
++ *
++ * The task of @pid, if found. %NULL otherwise.
++ */
++static inline struct task_struct *find_process_by_pid(pid_t pid)
++{
++ return pid ? find_task_by_vpid(pid) : current;
++}
++
++/* Actually do priority change: must hold rq lock. */
++static void __setscheduler(struct task_struct *p, struct rq *rq, int policy,
++ int prio, bool keep_boost)
++{
++ int oldrtprio, oldprio;
++
++ p->policy = policy;
++ oldrtprio = p->rt_priority;
++ p->rt_priority = prio;
++ p->normal_prio = normal_prio(p);
++ oldprio = p->prio;
++ /*
++ * Keep a potential priority boosting if called from
++ * sched_setscheduler().
++ */
++ p->prio = normal_prio(p);
++ if (keep_boost)
++ p->prio = rt_effective_prio(p, p->prio);
++
++ if (task_running(rq, p)) {
++ set_rq_task(rq, p);
++ resched_task(p);
++ } else if (task_queued(p)) {
++ dequeue_task(rq, p, DEQUEUE_SAVE);
++ enqueue_task(rq, p, ENQUEUE_RESTORE);
++ if (p->prio < oldprio || p->rt_priority > oldrtprio)
++ try_preempt(p, rq);
++ }
++}
++
++/*
++ * Check the target process has a UID that matches the current process's
++ */
++static bool check_same_owner(struct task_struct *p)
++{
++ const struct cred *cred = current_cred(), *pcred;
++ bool match;
++
++ rcu_read_lock();
++ pcred = __task_cred(p);
++ match = (uid_eq(cred->euid, pcred->euid) ||
++ uid_eq(cred->euid, pcred->uid));
++ rcu_read_unlock();
++ return match;
++}
++
++static int __sched_setscheduler(struct task_struct *p,
++ const struct sched_attr *attr,
++ bool user, bool pi)
++{
++ int retval, policy = attr->sched_policy, oldpolicy = -1, priority = attr->sched_priority;
++ unsigned long rlim_rtprio = 0;
++ struct rq_flags rf;
++ int reset_on_fork;
++ struct rq *rq;
++
++ /* The pi code expects interrupts enabled */
++ BUG_ON(pi && in_interrupt());
++
++ if (is_rt_policy(policy) && !capable(CAP_SYS_NICE)) {
++ unsigned long lflags;
++
++ if (!lock_task_sighand(p, &lflags))
++ return -ESRCH;
++ rlim_rtprio = task_rlimit(p, RLIMIT_RTPRIO);
++ unlock_task_sighand(p, &lflags);
++ if (rlim_rtprio)
++ goto recheck;
++ /*
++ * If the caller requested an RT policy without having the
++ * necessary rights, we downgrade the policy to SCHED_ISO.
++ * We also set the parameter to zero to pass the checks.
++ */
++ policy = SCHED_ISO;
++ priority = 0;
++ }
++recheck:
++ /* Double check policy once rq lock held */
++ if (policy < 0) {
++ reset_on_fork = p->sched_reset_on_fork;
++ policy = oldpolicy = p->policy;
++ } else {
++ reset_on_fork = !!(policy & SCHED_RESET_ON_FORK);
++ policy &= ~SCHED_RESET_ON_FORK;
++
++ if (!SCHED_RANGE(policy))
++ return -EINVAL;
++ }
++
++ if (attr->sched_flags & ~(SCHED_FLAG_ALL | SCHED_FLAG_SUGOV))
++ return -EINVAL;
++
++ /*
++ * Valid priorities for SCHED_FIFO and SCHED_RR are
++ * 1..MAX_USER_RT_PRIO-1, valid priority for SCHED_NORMAL and
++ * SCHED_BATCH is 0.
++ */
++ if (priority < 0 ||
++ (p->mm && priority > MAX_USER_RT_PRIO - 1) ||
++ (!p->mm && priority > MAX_RT_PRIO - 1))
++ return -EINVAL;
++ if (is_rt_policy(policy) != (priority != 0))
++ return -EINVAL;
++
++ /*
++ * Allow unprivileged RT tasks to decrease priority:
++ */
++ if (user && !capable(CAP_SYS_NICE)) {
++ if (is_rt_policy(policy)) {
++ unsigned long rlim_rtprio =
++ task_rlimit(p, RLIMIT_RTPRIO);
++
++ /* Can't set/change the rt policy */
++ if (policy != p->policy && !rlim_rtprio)
++ return -EPERM;
++
++ /* Can't increase priority */
++ if (priority > p->rt_priority &&
++ priority > rlim_rtprio)
++ return -EPERM;
++ } else {
++ switch (p->policy) {
++ /*
++ * Can only downgrade policies but not back to
++ * SCHED_NORMAL
++ */
++ case SCHED_ISO:
++ if (policy == SCHED_ISO)
++ goto out;
++ if (policy != SCHED_NORMAL)
++ return -EPERM;
++ break;
++ case SCHED_BATCH:
++ if (policy == SCHED_BATCH)
++ goto out;
++ if (policy != SCHED_IDLEPRIO)
++ return -EPERM;
++ break;
++ case SCHED_IDLEPRIO:
++ if (policy == SCHED_IDLEPRIO)
++ goto out;
++ return -EPERM;
++ default:
++ break;
++ }
++ }
++
++ /* Can't change other user's priorities */
++ if (!check_same_owner(p))
++ return -EPERM;
++
++ /* Normal users shall not reset the sched_reset_on_fork flag: */
++ if (p->sched_reset_on_fork && !reset_on_fork)
++ return -EPERM;
++ }
++
++ if (user) {
++ retval = security_task_setscheduler(p);
++ if (retval)
++ return retval;
++ }
++
++ /*
++ * Make sure no PI-waiters arrive (or leave) while we are
++ * changing the priority of the task:
++ *
++ * To be able to change p->policy safely, the runqueue lock must be
++ * held.
++ */
++ rq = task_rq_lock(p, &rf);
++ update_rq_clock(rq);
++
++ /*
++ * Changing the policy of the stop threads its a very bad idea:
++ */
++ if (p == rq->stop) {
++ task_rq_unlock(rq, p, &rf);
++ return -EINVAL;
++ }
++
++ /*
++ * If not changing anything there's no need to proceed further:
++ */
++ if (unlikely(policy == p->policy && (!is_rt_policy(policy) ||
++ priority == p->rt_priority))) {
++ task_rq_unlock(rq, p, &rf);
++ return 0;
++ }
++
++ /* Re-check policy now with rq lock held */
++ if (unlikely(oldpolicy != -1 && oldpolicy != p->policy)) {
++ policy = oldpolicy = -1;
++ task_rq_unlock(rq, p, &rf);
++ goto recheck;
++ }
++ p->sched_reset_on_fork = reset_on_fork;
++
++ __setscheduler(p, rq, policy, priority, pi);
++ task_rq_unlock(rq, p, &rf);
++
++ if (pi)
++ rt_mutex_adjust_pi(p);
++out:
++ return 0;
++}
++
++static int _sched_setscheduler(struct task_struct *p, int policy,
++ const struct sched_param *param, bool check)
++{
++ struct sched_attr attr = {
++ .sched_policy = policy,
++ .sched_priority = param->sched_priority,
++ .sched_nice = PRIO_TO_NICE(p->static_prio),
++ };
++
++ return __sched_setscheduler(p, &attr, check, true);
++}
++/**
++ * sched_setscheduler - change the scheduling policy and/or RT priority of a thread.
++ * @p: the task in question.
++ * @policy: new policy.
++ * @param: structure containing the new RT priority.
++ *
++ * Return: 0 on success. An error code otherwise.
++ *
++ * NOTE that the task may be already dead.
++ */
++int sched_setscheduler(struct task_struct *p, int policy,
++ const struct sched_param *param)
++{
++ return _sched_setscheduler(p, policy, param, true);
++}
++
++EXPORT_SYMBOL_GPL(sched_setscheduler);
++
++int sched_setattr(struct task_struct *p, const struct sched_attr *attr)
++{
++ return __sched_setscheduler(p, attr, true, true);
++}
++EXPORT_SYMBOL_GPL(sched_setattr);
++
++int sched_setattr_nocheck(struct task_struct *p, const struct sched_attr *attr)
++{
++ return __sched_setscheduler(p, attr, false, true);
++}
++
++/**
++ * sched_setscheduler_nocheck - change the scheduling policy and/or RT priority of a thread from kernelspace.
++ * @p: the task in question.
++ * @policy: new policy.
++ * @param: structure containing the new RT priority.
++ *
++ * Just like sched_setscheduler, only don't bother checking if the
++ * current context has permission. For example, this is needed in
++ * stop_machine(): we create temporary high priority worker threads,
++ * but our caller might not have that capability.
++ *
++ * Return: 0 on success. An error code otherwise.
++ */
++int sched_setscheduler_nocheck(struct task_struct *p, int policy,
++ const struct sched_param *param)
++{
++ return _sched_setscheduler(p, policy, param, false);
++}
++EXPORT_SYMBOL_GPL(sched_setscheduler_nocheck);
++
++static int
++do_sched_setscheduler(pid_t pid, int policy, struct sched_param __user *param)
++{
++ struct sched_param lparam;
++ struct task_struct *p;
++ int retval;
++
++ if (!param || pid < 0)
++ return -EINVAL;
++ if (copy_from_user(&lparam, param, sizeof(struct sched_param)))
++ return -EFAULT;
++
++ rcu_read_lock();
++ retval = -ESRCH;
++ p = find_process_by_pid(pid);
++ if (p != NULL)
++ retval = sched_setscheduler(p, policy, &lparam);
++ rcu_read_unlock();
++
++ return retval;
++}
++
++/*
++ * Mimics kernel/events/core.c perf_copy_attr().
++ */
++static int sched_copy_attr(struct sched_attr __user *uattr,
++ struct sched_attr *attr)
++{
++ u32 size;
++ int ret;
++
++ if (!access_ok(uattr, SCHED_ATTR_SIZE_VER0))
++ return -EFAULT;
++
++ /* Zero the full structure, so that a short copy will be nice: */
++ memset(attr, 0, sizeof(*attr));
++
++ ret = get_user(size, &uattr->size);
++ if (ret)
++ return ret;
++
++ /* Bail out on silly large: */
++ if (size > PAGE_SIZE)
++ goto err_size;
++
++ /* ABI compatibility quirk: */
++ if (!size)
++ size = SCHED_ATTR_SIZE_VER0;
++
++ if (size < SCHED_ATTR_SIZE_VER0)
++ goto err_size;
++
++ /*
++ * If we're handed a bigger struct than we know of,
++ * ensure all the unknown bits are 0 - i.e. new
++ * user-space does not rely on any kernel feature
++ * extensions we dont know about yet.
++ */
++ if (size > sizeof(*attr)) {
++ unsigned char __user *addr;
++ unsigned char __user *end;
++ unsigned char val;
++
++ addr = (void __user *)uattr + sizeof(*attr);
++ end = (void __user *)uattr + size;
++
++ for (; addr < end; addr++) {
++ ret = get_user(val, addr);
++ if (ret)
++ return ret;
++ if (val)
++ goto err_size;
++ }
++ size = sizeof(*attr);
++ }
++
++ ret = copy_from_user(attr, uattr, size);
++ if (ret)
++ return -EFAULT;
++
++ /*
++ * XXX: Do we want to be lenient like existing syscalls; or do we want
++ * to be strict and return an error on out-of-bounds values?
++ */
++ attr->sched_nice = clamp(attr->sched_nice, -20, 19);
++
++ /* sched/core.c uses zero here but we already know ret is zero */
++ return 0;
++
++err_size:
++ put_user(sizeof(*attr), &uattr->size);
++ return -E2BIG;
++}
++
++/*
++ * sched_setparam() passes in -1 for its policy, to let the functions
++ * it calls know not to change it.
++ */
++#define SETPARAM_POLICY -1
++
++/**
++ * sys_sched_setscheduler - set/change the scheduler policy and RT priority
++ * @pid: the pid in question.
++ * @policy: new policy.
++ * @param: structure containing the new RT priority.
++ *
++ * Return: 0 on success. An error code otherwise.
++ */
++SYSCALL_DEFINE3(sched_setscheduler, pid_t, pid, int, policy, struct sched_param __user *, param)
++{
++ if (policy < 0)
++ return -EINVAL;
++
++ return do_sched_setscheduler(pid, policy, param);
++}
++
++/**
++ * sys_sched_setparam - set/change the RT priority of a thread
++ * @pid: the pid in question.
++ * @param: structure containing the new RT priority.
++ *
++ * Return: 0 on success. An error code otherwise.
++ */
++SYSCALL_DEFINE2(sched_setparam, pid_t, pid, struct sched_param __user *, param)
++{
++ return do_sched_setscheduler(pid, SETPARAM_POLICY, param);
++}
++
++/**
++ * sys_sched_setattr - same as above, but with extended sched_attr
++ * @pid: the pid in question.
++ * @uattr: structure containing the extended parameters.
++ */
++SYSCALL_DEFINE3(sched_setattr, pid_t, pid, struct sched_attr __user *, uattr,
++ unsigned int, flags)
++{
++ struct sched_attr attr;
++ struct task_struct *p;
++ int retval;
++
++ if (!uattr || pid < 0 || flags)
++ return -EINVAL;
++
++ retval = sched_copy_attr(uattr, &attr);
++ if (retval)
++ return retval;
++
++ if ((int)attr.sched_policy < 0)
++ return -EINVAL;
++
++ rcu_read_lock();
++ retval = -ESRCH;
++ p = find_process_by_pid(pid);
++ if (p != NULL)
++ retval = sched_setattr(p, &attr);
++ rcu_read_unlock();
++
++ return retval;
++}
++
++/**
++ * sys_sched_getscheduler - get the policy (scheduling class) of a thread
++ * @pid: the pid in question.
++ *
++ * Return: On success, the policy of the thread. Otherwise, a negative error
++ * code.
++ */
++SYSCALL_DEFINE1(sched_getscheduler, pid_t, pid)
++{
++ struct task_struct *p;
++ int retval = -EINVAL;
++
++ if (pid < 0)
++ goto out_nounlock;
++
++ retval = -ESRCH;
++ rcu_read_lock();
++ p = find_process_by_pid(pid);
++ if (p) {
++ retval = security_task_getscheduler(p);
++ if (!retval)
++ retval = p->policy;
++ }
++ rcu_read_unlock();
++
++out_nounlock:
++ return retval;
++}
++
++/**
++ * sys_sched_getscheduler - get the RT priority of a thread
++ * @pid: the pid in question.
++ * @param: structure containing the RT priority.
++ *
++ * Return: On success, 0 and the RT priority is in @param. Otherwise, an error
++ * code.
++ */
++SYSCALL_DEFINE2(sched_getparam, pid_t, pid, struct sched_param __user *, param)
++{
++ struct sched_param lp = { .sched_priority = 0 };
++ struct task_struct *p;
++ int retval = -EINVAL;
++
++ if (!param || pid < 0)
++ goto out_nounlock;
++
++ rcu_read_lock();
++ p = find_process_by_pid(pid);
++ retval = -ESRCH;
++ if (!p)
++ goto out_unlock;
++
++ retval = security_task_getscheduler(p);
++ if (retval)
++ goto out_unlock;
++
++ if (has_rt_policy(p))
++ lp.sched_priority = p->rt_priority;
++ rcu_read_unlock();
++
++ /*
++ * This one might sleep, we cannot do it with a spinlock held ...
++ */
++ retval = copy_to_user(param, &lp, sizeof(*param)) ? -EFAULT : 0;
++
++out_nounlock:
++ return retval;
++
++out_unlock:
++ rcu_read_unlock();
++ return retval;
++}
++
++static int sched_read_attr(struct sched_attr __user *uattr,
++ struct sched_attr *attr,
++ unsigned int usize)
++{
++ int ret;
++
++ if (!access_ok(uattr, usize))
++ return -EFAULT;
++
++ /*
++ * If we're handed a smaller struct than we know of,
++ * ensure all the unknown bits are 0 - i.e. old
++ * user-space does not get uncomplete information.
++ */
++ if (usize < sizeof(*attr)) {
++ unsigned char *addr;
++ unsigned char *end;
++
++ addr = (void *)attr + usize;
++ end = (void *)attr + sizeof(*attr);
++
++ for (; addr < end; addr++) {
++ if (*addr)
++ return -EFBIG;
++ }
++
++ attr->size = usize;
++ }
++
++ ret = copy_to_user(uattr, attr, attr->size);
++ if (ret)
++ return -EFAULT;
++
++ /* sched/core.c uses zero here but we already know ret is zero */
++ return ret;
++}
++
++/**
++ * sys_sched_getattr - similar to sched_getparam, but with sched_attr
++ * @pid: the pid in question.
++ * @uattr: structure containing the extended parameters.
++ * @size: sizeof(attr) for fwd/bwd comp.
++ * @flags: for future extension.
++ */
++SYSCALL_DEFINE4(sched_getattr, pid_t, pid, struct sched_attr __user *, uattr,
++ unsigned int, size, unsigned int, flags)
++{
++ struct sched_attr attr = {
++ .size = sizeof(struct sched_attr),
++ };
++ struct task_struct *p;
++ int retval;
++
++ if (!uattr || pid < 0 || size > PAGE_SIZE ||
++ size < SCHED_ATTR_SIZE_VER0 || flags)
++ return -EINVAL;
++
++ rcu_read_lock();
++ p = find_process_by_pid(pid);
++ retval = -ESRCH;
++ if (!p)
++ goto out_unlock;
++
++ retval = security_task_getscheduler(p);
++ if (retval)
++ goto out_unlock;
++
++ attr.sched_policy = p->policy;
++ if (rt_task(p))
++ attr.sched_priority = p->rt_priority;
++ else
++ attr.sched_nice = task_nice(p);
++
++ rcu_read_unlock();
++
++ retval = sched_read_attr(uattr, &attr, size);
++ return retval;
++
++out_unlock:
++ rcu_read_unlock();
++ return retval;
++}
++
++long sched_setaffinity(pid_t pid, const struct cpumask *in_mask)
++{
++ cpumask_var_t cpus_allowed, new_mask;
++ struct task_struct *p;
++ int retval;
++
++ rcu_read_lock();
++
++ p = find_process_by_pid(pid);
++ if (!p) {
++ rcu_read_unlock();
++ return -ESRCH;
++ }
++
++ /* Prevent p going away */
++ get_task_struct(p);
++ rcu_read_unlock();
++
++ if (p->flags & PF_NO_SETAFFINITY) {
++ retval = -EINVAL;
++ goto out_put_task;
++ }
++ if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) {
++ retval = -ENOMEM;
++ goto out_put_task;
++ }
++ if (!alloc_cpumask_var(&new_mask, GFP_KERNEL)) {
++ retval = -ENOMEM;
++ goto out_free_cpus_allowed;
++ }
++ retval = -EPERM;
++ if (!check_same_owner(p)) {
++ rcu_read_lock();
++ if (!ns_capable(__task_cred(p)->user_ns, CAP_SYS_NICE)) {
++ rcu_read_unlock();
++ goto out_unlock;
++ }
++ rcu_read_unlock();
++ }
++
++ retval = security_task_setscheduler(p);
++ if (retval)
++ goto out_unlock;
++
++ cpuset_cpus_allowed(p, cpus_allowed);
++ cpumask_and(new_mask, in_mask, cpus_allowed);
++again:
++ retval = __set_cpus_allowed_ptr(p, new_mask, true);
++
++ if (!retval) {
++ cpuset_cpus_allowed(p, cpus_allowed);
++ if (!cpumask_subset(new_mask, cpus_allowed)) {
++ /*
++ * We must have raced with a concurrent cpuset
++ * update. Just reset the cpus_allowed to the
++ * cpuset's cpus_allowed
++ */
++ cpumask_copy(new_mask, cpus_allowed);
++ goto again;
++ }
++ }
++out_unlock:
++ free_cpumask_var(new_mask);
++out_free_cpus_allowed:
++ free_cpumask_var(cpus_allowed);
++out_put_task:
++ put_task_struct(p);
++ return retval;
++}
++
++static int get_user_cpu_mask(unsigned long __user *user_mask_ptr, unsigned len,
++ cpumask_t *new_mask)
++{
++ if (len < cpumask_size())
++ cpumask_clear(new_mask);
++ else if (len > cpumask_size())
++ len = cpumask_size();
++
++ return copy_from_user(new_mask, user_mask_ptr, len) ? -EFAULT : 0;
++}
++
++
++/**
++ * sys_sched_setaffinity - set the CPU affinity of a process
++ * @pid: pid of the process
++ * @len: length in bytes of the bitmask pointed to by user_mask_ptr
++ * @user_mask_ptr: user-space pointer to the new CPU mask
++ *
++ * Return: 0 on success. An error code otherwise.
++ */
++SYSCALL_DEFINE3(sched_setaffinity, pid_t, pid, unsigned int, len,
++ unsigned long __user *, user_mask_ptr)
++{
++ cpumask_var_t new_mask;
++ int retval;
++
++ if (!alloc_cpumask_var(&new_mask, GFP_KERNEL))
++ return -ENOMEM;
++
++ retval = get_user_cpu_mask(user_mask_ptr, len, new_mask);
++ if (retval == 0)
++ retval = sched_setaffinity(pid, new_mask);
++ free_cpumask_var(new_mask);
++ return retval;
++}
++
++long sched_getaffinity(pid_t pid, cpumask_t *mask)
++{
++ struct task_struct *p;
++ unsigned long flags;
++ int retval;
++
++ get_online_cpus();
++ rcu_read_lock();
++
++ retval = -ESRCH;
++ p = find_process_by_pid(pid);
++ if (!p)
++ goto out_unlock;
++
++ retval = security_task_getscheduler(p);
++ if (retval)
++ goto out_unlock;
++
++ raw_spin_lock_irqsave(&p->pi_lock, flags);
++ cpumask_and(mask, &p->cpus_allowed, cpu_active_mask);
++ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
++
++out_unlock:
++ rcu_read_unlock();
++ put_online_cpus();
++
++ return retval;
++}
++
++/**
++ * sys_sched_getaffinity - get the CPU affinity of a process
++ * @pid: pid of the process
++ * @len: length in bytes of the bitmask pointed to by user_mask_ptr
++ * @user_mask_ptr: user-space pointer to hold the current CPU mask
++ *
++ * Return: 0 on success. An error code otherwise.
++ */
++SYSCALL_DEFINE3(sched_getaffinity, pid_t, pid, unsigned int, len,
++ unsigned long __user *, user_mask_ptr)
++{
++ int ret;
++ cpumask_var_t mask;
++
++ if ((len * BITS_PER_BYTE) < nr_cpu_ids)
++ return -EINVAL;
++ if (len & (sizeof(unsigned long)-1))
++ return -EINVAL;
++
++ if (!alloc_cpumask_var(&mask, GFP_KERNEL))
++ return -ENOMEM;
++
++ ret = sched_getaffinity(pid, mask);
++ if (ret == 0) {
++ unsigned int retlen = min(len, cpumask_size());
++
++ if (copy_to_user(user_mask_ptr, mask, retlen))
++ ret = -EFAULT;
++ else
++ ret = retlen;
++ }
++ free_cpumask_var(mask);
++
++ return ret;
++}
++
++/**
++ * sys_sched_yield - yield the current processor to other threads.
++ *
++ * This function yields the current CPU to other tasks. It does this by
++ * scheduling away the current task. If it still has the earliest deadline
++ * it will be scheduled again as the next task.
++ *
++ * Return: 0.
++ */
++static void do_sched_yield(void)
++{
++ struct rq *rq;
++
++ if (!sched_yield_type)
++ return;
++
++ local_irq_disable();
++ rq = this_rq();
++ rq_lock(rq);
++
++ if (sched_yield_type > 1)
++ time_slice_expired(current, rq);
++ schedstat_inc(rq->yld_count);
++
++ /*
++ * Since we are going to call schedule() anyway, there's
++ * no need to preempt or enable interrupts:
++ */
++ preempt_disable();
++ rq_unlock(rq);
++ sched_preempt_enable_no_resched();
++
++ schedule();
++}
++
++SYSCALL_DEFINE0(sched_yield)
++{
++ do_sched_yield();
++ return 0;
++}
++
++#ifndef CONFIG_PREEMPT
++int __sched _cond_resched(void)
++{
++ if (should_resched(0)) {
++ preempt_schedule_common();
++ return 1;
++ }
++ rcu_all_qs();
++ return 0;
++}
++EXPORT_SYMBOL(_cond_resched);
++#endif
++
++/*
++ * __cond_resched_lock() - if a reschedule is pending, drop the given lock,
++ * call schedule, and on return reacquire the lock.
++ *
++ * This works OK both with and without CONFIG_PREEMPT. We do strange low-level
++ * operations here to prevent schedule() from being called twice (once via
++ * spin_unlock(), once by hand).
++ */
++int __cond_resched_lock(spinlock_t *lock)
++{
++ int resched = should_resched(PREEMPT_LOCK_OFFSET);
++ int ret = 0;
++
++ lockdep_assert_held(lock);
++
++ if (spin_needbreak(lock) || resched) {
++ spin_unlock(lock);
++ if (resched)
++ preempt_schedule_common();
++ else
++ cpu_relax();
++ ret = 1;
++ spin_lock(lock);
++ }
++ return ret;
++}
++EXPORT_SYMBOL(__cond_resched_lock);
++
++/**
++ * yield - yield the current processor to other threads.
++ *
++ * Do not ever use this function, there's a 99% chance you're doing it wrong.
++ *
++ * The scheduler is at all times free to pick the calling task as the most
++ * eligible task to run, if removing the yield() call from your code breaks
++ * it, its already broken.
++ *
++ * Typical broken usage is:
++ *
++ * while (!event)
++ * yield();
++ *
++ * where one assumes that yield() will let 'the other' process run that will
++ * make event true. If the current task is a SCHED_FIFO task that will never
++ * happen. Never use yield() as a progress guarantee!!
++ *
++ * If you want to use yield() to wait for something, use wait_event().
++ * If you want to use yield() to be 'nice' for others, use cond_resched().
++ * If you still want to use yield(), do not!
++ */
++void __sched yield(void)
++{
++ set_current_state(TASK_RUNNING);
++ do_sched_yield();
++}
++EXPORT_SYMBOL(yield);
++
++/**
++ * yield_to - yield the current processor to another thread in
++ * your thread group, or accelerate that thread toward the
++ * processor it's on.
++ * @p: target task
++ * @preempt: whether task preemption is allowed or not
++ *
++ * It's the caller's job to ensure that the target task struct
++ * can't go away on us before we can do any checks.
++ *
++ * Return:
++ * true (>0) if we indeed boosted the target task.
++ * false (0) if we failed to boost the target.
++ * -ESRCH if there's no task to yield to.
++ */
++int __sched yield_to(struct task_struct *p, bool preempt)
++{
++ struct task_struct *rq_p;
++ struct rq *rq, *p_rq;
++ unsigned long flags;
++ int yielded = 0;
++
++ local_irq_save(flags);
++ rq = this_rq();
++
++again:
++ p_rq = task_rq(p);
++ /*
++ * If we're the only runnable task on the rq and target rq also
++ * has only one task, there's absolutely no point in yielding.
++ */
++ if (task_running(p_rq, p) || p->state) {
++ yielded = -ESRCH;
++ goto out_irq;
++ }
++
++ double_rq_lock(rq, p_rq);
++ if (unlikely(task_rq(p) != p_rq)) {
++ double_rq_unlock(rq, p_rq);
++ goto again;
++ }
++
++ yielded = 1;
++ schedstat_inc(rq->yld_count);
++ rq_p = rq->curr;
++ if (p->deadline > rq_p->deadline)
++ p->deadline = rq_p->deadline;
++ p->time_slice += rq_p->time_slice;
++ if (p->time_slice > timeslice())
++ p->time_slice = timeslice();
++ time_slice_expired(rq_p, rq);
++ if (preempt && rq != p_rq)
++ resched_task(p_rq->curr);
++ double_rq_unlock(rq, p_rq);
++out_irq:
++ local_irq_restore(flags);
++
++ if (yielded > 0)
++ schedule();
++ return yielded;
++}
++EXPORT_SYMBOL_GPL(yield_to);
++
++int io_schedule_prepare(void)
++{
++ int old_iowait = current->in_iowait;
++
++ current->in_iowait = 1;
++ blk_schedule_flush_plug(current);
++
++ return old_iowait;
++}
++
++void io_schedule_finish(int token)
++{
++ current->in_iowait = token;
++}
++
++/*
++ * This task is about to go to sleep on IO. Increment rq->nr_iowait so
++ * that process accounting knows that this is a task in IO wait state.
++ *
++ * But don't do that if it is a deliberate, throttling IO wait (this task
++ * has set its backing_dev_info: the queue against which it should throttle)
++ */
++
++long __sched io_schedule_timeout(long timeout)
++{
++ int token;
++ long ret;
++
++ token = io_schedule_prepare();
++ ret = schedule_timeout(timeout);
++ io_schedule_finish(token);
++
++ return ret;
++}
++EXPORT_SYMBOL(io_schedule_timeout);
++
++void io_schedule(void)
++{
++ int token;
++
++ token = io_schedule_prepare();
++ schedule();
++ io_schedule_finish(token);
++}
++EXPORT_SYMBOL(io_schedule);
++
++/**
++ * sys_sched_get_priority_max - return maximum RT priority.
++ * @policy: scheduling class.
++ *
++ * Return: On success, this syscall returns the maximum
++ * rt_priority that can be used by a given scheduling class.
++ * On failure, a negative error code is returned.
++ */
++SYSCALL_DEFINE1(sched_get_priority_max, int, policy)
++{
++ int ret = -EINVAL;
++
++ switch (policy) {
++ case SCHED_FIFO:
++ case SCHED_RR:
++ ret = MAX_USER_RT_PRIO-1;
++ break;
++ case SCHED_NORMAL:
++ case SCHED_BATCH:
++ case SCHED_ISO:
++ case SCHED_IDLEPRIO:
++ ret = 0;
++ break;
++ }
++ return ret;
++}
++
++/**
++ * sys_sched_get_priority_min - return minimum RT priority.
++ * @policy: scheduling class.
++ *
++ * Return: On success, this syscall returns the minimum
++ * rt_priority that can be used by a given scheduling class.
++ * On failure, a negative error code is returned.
++ */
++SYSCALL_DEFINE1(sched_get_priority_min, int, policy)
++{
++ int ret = -EINVAL;
++
++ switch (policy) {
++ case SCHED_FIFO:
++ case SCHED_RR:
++ ret = 1;
++ break;
++ case SCHED_NORMAL:
++ case SCHED_BATCH:
++ case SCHED_ISO:
++ case SCHED_IDLEPRIO:
++ ret = 0;
++ break;
++ }
++ return ret;
++}
++
++static int sched_rr_get_interval(pid_t pid, struct timespec64 *t)
++{
++ struct task_struct *p;
++ unsigned int time_slice;
++ struct rq_flags rf;
++ struct rq *rq;
++ int retval;
++
++ if (pid < 0)
++ return -EINVAL;
++
++ retval = -ESRCH;
++ rcu_read_lock();
++ p = find_process_by_pid(pid);
++ if (!p)
++ goto out_unlock;
++
++ retval = security_task_getscheduler(p);
++ if (retval)
++ goto out_unlock;
++
++ rq = task_rq_lock(p, &rf);
++ time_slice = p->policy == SCHED_FIFO ? 0 : MS_TO_NS(task_timeslice(p));
++ task_rq_unlock(rq, p, &rf);
++
++ rcu_read_unlock();
++ *t = ns_to_timespec64(time_slice);
++ return 0;
++
++out_unlock:
++ rcu_read_unlock();
++ return retval;
++}
++
++/**
++ * sys_sched_rr_get_interval - return the default timeslice of a process.
++ * @pid: pid of the process.
++ * @interval: userspace pointer to the timeslice value.
++ *
++ * this syscall writes the default timeslice value of a given process
++ * into the user-space timespec buffer. A value of '0' means infinity.
++ *
++ * Return: On success, 0 and the timeslice is in @interval. Otherwise,
++ * an error code.
++ */
++SYSCALL_DEFINE2(sched_rr_get_interval, pid_t, pid,
++ struct __kernel_timespec __user *, interval)
++{
++ struct timespec64 t;
++ int retval = sched_rr_get_interval(pid, &t);
++
++ if (retval == 0)
++ retval = put_timespec64(&t, interval);
++
++ return retval;
++}
++
++#ifdef CONFIG_COMPAT_32BIT_TIME
++SYSCALL_DEFINE2(sched_rr_get_interval_time32, pid_t, pid,
++ struct old_timespec32 __user *, interval)
++{
++ struct timespec64 t;
++ int retval = sched_rr_get_interval(pid, &t);
++
++ if (retval == 0)
++ retval = put_old_timespec32(&t, interval);
++ return retval;
++}
++#endif
++
++void sched_show_task(struct task_struct *p)
++{
++ unsigned long free = 0;
++ int ppid;
++
++ if (!try_get_task_stack(p))
++ return;
++
++ printk(KERN_INFO "%-15.15s %c", p->comm, task_state_to_char(p));
++
++ if (p->state == TASK_RUNNING)
++ printk(KERN_CONT " running task ");
++#ifdef CONFIG_DEBUG_STACK_USAGE
++ free = stack_not_used(p);
++#endif
++ ppid = 0;
++ rcu_read_lock();
++ if (pid_alive(p))
++ ppid = task_pid_nr(rcu_dereference(p->real_parent));
++ rcu_read_unlock();
++ printk(KERN_CONT "%5lu %5d %6d 0x%08lx\n", free,
++ task_pid_nr(p), ppid,
++ (unsigned long)task_thread_info(p)->flags);
++
++ print_worker_info(KERN_INFO, p);
++ show_stack(p, NULL);
++ put_task_stack(p);
++}
++EXPORT_SYMBOL_GPL(sched_show_task);
++
++static inline bool
++state_filter_match(unsigned long state_filter, struct task_struct *p)
++{
++ /* no filter, everything matches */
++ if (!state_filter)
++ return true;
++
++ /* filter, but doesn't match */
++ if (!(p->state & state_filter))
++ return false;
++
++ /*
++ * When looking for TASK_UNINTERRUPTIBLE skip TASK_IDLE (allows
++ * TASK_KILLABLE).
++ */
++ if (state_filter == TASK_UNINTERRUPTIBLE && p->state == TASK_IDLE)
++ return false;
++
++ return true;
++}
++
++void show_state_filter(unsigned long state_filter)
++{
++ struct task_struct *g, *p;
++
++#if BITS_PER_LONG == 32
++ printk(KERN_INFO
++ " task PC stack pid father\n");
++#else
++ printk(KERN_INFO
++ " task PC stack pid father\n");
++#endif
++ rcu_read_lock();
++ for_each_process_thread(g, p) {
++ /*
++ * reset the NMI-timeout, listing all files on a slow
++ * console might take a lot of time:
++ * Also, reset softlockup watchdogs on all CPUs, because
++ * another CPU might be blocked waiting for us to process
++ * an IPI.
++ */
++ touch_nmi_watchdog();
++ touch_all_softlockup_watchdogs();
++ if (state_filter_match(state_filter, p))
++ sched_show_task(p);
++ }
++
++ rcu_read_unlock();
++ /*
++ * Only show locks if all tasks are dumped:
++ */
++ if (!state_filter)
++ debug_show_all_locks();
++}
++
++void dump_cpu_task(int cpu)
++{
++ pr_info("Task dump for CPU %d:\n", cpu);
++ sched_show_task(cpu_curr(cpu));
++}
++
++#ifdef CONFIG_SMP
++void set_cpus_allowed_common(struct task_struct *p, const struct cpumask *new_mask)
++{
++ cpumask_copy(&p->cpus_allowed, new_mask);
++ p->nr_cpus_allowed = cpumask_weight(new_mask);
++}
++
++void __do_set_cpus_allowed(struct task_struct *p, const struct cpumask *new_mask)
++{
++ struct rq *rq = task_rq(p);
++
++ lockdep_assert_held(&p->pi_lock);
++
++ cpumask_copy(&p->cpus_allowed, new_mask);
++
++ if (task_queued(p)) {
++ /*
++ * Because __kthread_bind() calls this on blocked tasks without
++ * holding rq->lock.
++ */
++ lockdep_assert_held(rq->lock);
++ }
++}
++
++/*
++ * Calling do_set_cpus_allowed from outside the scheduler code should not be
++ * called on a running or queued task. We should be holding pi_lock.
++ */
++void do_set_cpus_allowed(struct task_struct *p, const struct cpumask *new_mask)
++{
++ __do_set_cpus_allowed(p, new_mask);
++ if (needs_other_cpu(p, task_cpu(p))) {
++ struct rq *rq;
++
++ rq = __task_rq_lock(p, NULL);
++ set_task_cpu(p, valid_task_cpu(p));
++ resched_task(p);
++ __task_rq_unlock(rq, NULL);
++ }
++}
++#endif
++
++/**
++ * init_idle - set up an idle thread for a given CPU
++ * @idle: task in question
++ * @cpu: cpu the idle task belongs to
++ *
++ * NOTE: this function does not set the idle thread's NEED_RESCHED
++ * flag, to make booting more robust.
++ */
++void init_idle(struct task_struct *idle, int cpu)
++{
++ struct rq *rq = cpu_rq(cpu);
++ unsigned long flags;
++
++ raw_spin_lock_irqsave(&idle->pi_lock, flags);
++ raw_spin_lock(rq->lock);
++ idle->last_ran = rq->niffies;
++ time_slice_expired(idle, rq);
++ idle->state = TASK_RUNNING;
++ /* Setting prio to illegal value shouldn't matter when never queued */
++ idle->prio = PRIO_LIMIT;
++
++ kasan_unpoison_task_stack(idle);
++
++#ifdef CONFIG_SMP
++ /*
++ * It's possible that init_idle() gets called multiple times on a task,
++ * in that case do_set_cpus_allowed() will not do the right thing.
++ *
++ * And since this is boot we can forgo the serialisation.
++ */
++ set_cpus_allowed_common(idle, cpumask_of(cpu));
++#ifdef CONFIG_SMT_NICE
++ idle->smt_bias = 0;
++#endif
++#endif
++ set_rq_task(rq, idle);
++
++ /* Silence PROVE_RCU */
++ rcu_read_lock();
++ set_task_cpu(idle, cpu);
++ rcu_read_unlock();
++
++ rq->curr = rq->idle = idle;
++ idle->on_rq = TASK_ON_RQ_QUEUED;
++ raw_spin_unlock(rq->lock);
++ raw_spin_unlock_irqrestore(&idle->pi_lock, flags);
++
++ /* Set the preempt count _outside_ the spinlocks! */
++ init_idle_preempt_count(idle, cpu);
++
++ ftrace_graph_init_idle_task(idle, cpu);
++ vtime_init_idle(idle, cpu);
++#ifdef CONFIG_SMP
++ sprintf(idle->comm, "%s/%d", INIT_TASK_COMM, cpu);
++#endif
++}
++
++int cpuset_cpumask_can_shrink(const struct cpumask __maybe_unused *cur,
++ const struct cpumask __maybe_unused *trial)
++{
++ return 1;
++}
++
++int task_can_attach(struct task_struct *p,
++ const struct cpumask *cs_cpus_allowed)
++{
++ int ret = 0;
++
++ /*
++ * Kthreads which disallow setaffinity shouldn't be moved
++ * to a new cpuset; we don't want to change their CPU
++ * affinity and isolating such threads by their set of
++ * allowed nodes is unnecessary. Thus, cpusets are not
++ * applicable for such threads. This prevents checking for
++ * success of set_cpus_allowed_ptr() on all attached tasks
++ * before cpus_allowed may be changed.
++ */
++ if (p->flags & PF_NO_SETAFFINITY)
++ ret = -EINVAL;
++
++ return ret;
++}
++
++void resched_cpu(int cpu)
++{
++ struct rq *rq = cpu_rq(cpu);
++ struct rq_flags rf;
++
++ rq_lock_irqsave(rq, &rf);
++ if (cpu_online(cpu) || cpu == smp_processor_id())
++ resched_curr(rq);
++ rq_unlock_irqrestore(rq, &rf);
++}
++
++#ifdef CONFIG_SMP
++#ifdef CONFIG_NO_HZ_COMMON
++void nohz_balance_enter_idle(int cpu)
++{
++}
++
++void select_nohz_load_balancer(int stop_tick)
++{
++}
++
++void set_cpu_sd_state_idle(void) {}
++
++/*
++ * In the semi idle case, use the nearest busy CPU for migrating timers
++ * from an idle CPU. This is good for power-savings.
++ *
++ * We don't do similar optimization for completely idle system, as
++ * selecting an idle CPU will add more delays to the timers than intended
++ * (as that CPU's timer base may not be uptodate wrt jiffies etc).
++ */
++int get_nohz_timer_target(void)
++{
++ int i, cpu = smp_processor_id();
++ struct sched_domain *sd;
++
++ if (!idle_cpu(cpu) && housekeeping_cpu(cpu, HK_FLAG_TIMER))
++ return cpu;
++
++ rcu_read_lock();
++ for_each_domain(cpu, sd) {
++ for_each_cpu(i, sched_domain_span(sd)) {
++ if (cpu == i)
++ continue;
++
++ if (!idle_cpu(i) && housekeeping_cpu(i, HK_FLAG_TIMER)) {
++ cpu = i;
++ cpu = i;
++ goto unlock;
++ }
++ }
++ }
++
++ if (!housekeeping_cpu(cpu, HK_FLAG_TIMER))
++ cpu = housekeeping_any_cpu(HK_FLAG_TIMER);
++unlock:
++ rcu_read_unlock();
++ return cpu;
++}
++
++/*
++ * When add_timer_on() enqueues a timer into the timer wheel of an
++ * idle CPU then this timer might expire before the next timer event
++ * which is scheduled to wake up that CPU. In case of a completely
++ * idle system the next event might even be infinite time into the
++ * future. wake_up_idle_cpu() ensures that the CPU is woken up and
++ * leaves the inner idle loop so the newly added timer is taken into
++ * account when the CPU goes back to idle and evaluates the timer
++ * wheel for the next timer event.
++ */
++void wake_up_idle_cpu(int cpu)
++{
++ if (cpu == smp_processor_id())
++ return;
++
++ if (set_nr_and_not_polling(cpu_rq(cpu)->idle))
++ smp_sched_reschedule(cpu);
++ else
++ trace_sched_wake_idle_without_ipi(cpu);
++}
++
++static bool wake_up_full_nohz_cpu(int cpu)
++{
++ /*
++ * We just need the target to call irq_exit() and re-evaluate
++ * the next tick. The nohz full kick at least implies that.
++ * If needed we can still optimize that later with an
++ * empty IRQ.
++ */
++ if (cpu_is_offline(cpu))
++ return true; /* Don't try to wake offline CPUs. */
++ if (tick_nohz_full_cpu(cpu)) {
++ if (cpu != smp_processor_id() ||
++ tick_nohz_tick_stopped())
++ tick_nohz_full_kick_cpu(cpu);
++ return true;
++ }
++
++ return false;
++}
++
++/*
++ * Wake up the specified CPU. If the CPU is going offline, it is the
++ * caller's responsibility to deal with the lost wakeup, for example,
++ * by hooking into the CPU_DEAD notifier like timers and hrtimers do.
++ */
++void wake_up_nohz_cpu(int cpu)
++{
++ if (!wake_up_full_nohz_cpu(cpu))
++ wake_up_idle_cpu(cpu);
++}
++#endif /* CONFIG_NO_HZ_COMMON */
++
++/*
++ * Change a given task's CPU affinity. Migrate the thread to a
++ * proper CPU and schedule it away if the CPU it's executing on
++ * is removed from the allowed bitmask.
++ *
++ * NOTE: the caller must have a valid reference to the task, the
++ * task must not exit() & deallocate itself prematurely. The
++ * call is not atomic; no spinlocks may be held.
++ */
++static int __set_cpus_allowed_ptr(struct task_struct *p,
++ const struct cpumask *new_mask, bool check)
++{
++ const struct cpumask *cpu_valid_mask = cpu_active_mask;
++ bool queued = false, running_wrong = false, kthread;
++ struct cpumask old_mask;
++ struct rq_flags rf;
++ int cpu, ret = 0;
++ struct rq *rq;
++
++ rq = task_rq_lock(p, &rf);
++ update_rq_clock(rq);
++
++ kthread = !!(p->flags & PF_KTHREAD);
++ if (kthread) {
++ /*
++ * Kernel threads are allowed on online && !active CPUs
++ */
++ cpu_valid_mask = cpu_online_mask;
++ }
++
++ /*
++ * Must re-check here, to close a race against __kthread_bind(),
++ * sched_setaffinity() is not guaranteed to observe the flag.
++ */
++ if (check && (p->flags & PF_NO_SETAFFINITY)) {
++ ret = -EINVAL;
++ goto out;
++ }
++
++ cpumask_copy(&old_mask, &p->cpus_allowed);
++ if (cpumask_equal(&old_mask, new_mask))
++ goto out;
++
++ if (!cpumask_intersects(new_mask, cpu_valid_mask)) {
++ ret = -EINVAL;
++ goto out;
++ }
++
++ queued = task_queued(p);
++ __do_set_cpus_allowed(p, new_mask);
++
++ if (kthread) {
++ /*
++ * For kernel threads that do indeed end up on online &&
++ * !active we want to ensure they are strict per-CPU threads.
++ */
++ WARN_ON(cpumask_intersects(new_mask, cpu_online_mask) &&
++ !cpumask_intersects(new_mask, cpu_active_mask) &&
++ p->nr_cpus_allowed != 1);
++ }
++
++ /* Can the task run on the task's current CPU? If so, we're done */
++ if (cpumask_test_cpu(task_cpu(p), new_mask))
++ goto out;
++
++ if (task_running(rq, p)) {
++ /* Task is running on the wrong cpu now, reschedule it. */
++ if (rq == this_rq()) {
++ cpu = cpumask_any_and(cpu_valid_mask, new_mask);
++ set_task_cpu(p, cpu);
++ set_tsk_need_resched(p);
++ running_wrong = true;
++ } else
++ resched_task(p);
++ } else {
++ cpu = cpumask_any_and(cpu_valid_mask, new_mask);
++ if (queued) {
++ /*
++ * Switch runqueue locks after dequeueing the task
++ * here while still holding the pi_lock to be holding
++ * the correct lock for enqueueing.
++ */
++ dequeue_task(rq, p, 0);
++ rq_unlock(rq);
++
++ rq = cpu_rq(cpu);
++ rq_lock(rq);
++ }
++ set_task_cpu(p, cpu);
++ if (queued)
++ enqueue_task(rq, p, 0);
++ }
++ if (queued)
++ try_preempt(p, rq);
++ if (running_wrong)
++ preempt_disable();
++out:
++ task_rq_unlock(rq, p, &rf);
++
++ if (running_wrong) {
++ __schedule(true);
++ preempt_enable();
++ }
++
++ return ret;
++}
++
++int set_cpus_allowed_ptr(struct task_struct *p, const struct cpumask *new_mask)
++{
++ return __set_cpus_allowed_ptr(p, new_mask, false);
++}
++EXPORT_SYMBOL_GPL(set_cpus_allowed_ptr);
++
++#ifdef CONFIG_HOTPLUG_CPU
++/*
++ * Run through task list and find tasks affined to the dead cpu, then remove
++ * that cpu from the list, enable cpu0 and set the zerobound flag. Must hold
++ * cpu 0 and src_cpu's runqueue locks.
++ */
++static void bind_zero(int src_cpu)
++{
++ struct task_struct *p, *t;
++ struct rq *rq0;
++ int bound = 0;
++
++ if (src_cpu == 0)
++ return;
++
++ rq0 = cpu_rq(0);
++
++ do_each_thread(t, p) {
++ if (cpumask_test_cpu(src_cpu, &p->cpus_allowed)) {
++ bool local = (task_cpu(p) == src_cpu);
++ struct rq *rq = task_rq(p);
++
++ /* task_running is the cpu stopper thread */
++ if (local && task_running(rq, p))
++ continue;
++ atomic_clear_cpu(src_cpu, &p->cpus_allowed);
++ atomic_set_cpu(0, &p->cpus_allowed);
++ p->zerobound = true;
++ bound++;
++ if (local) {
++ bool queued = task_queued(p);
++
++ if (queued)
++ dequeue_task(rq, p, 0);
++ set_task_cpu(p, 0);
++ if (queued)
++ enqueue_task(rq0, p, 0);
++ }
++ }
++ } while_each_thread(t, p);
++
++ if (bound) {
++ printk(KERN_INFO "Removed affinity for %d processes to cpu %d\n",
++ bound, src_cpu);
++ }
++}
++
++/* Find processes with the zerobound flag and reenable their affinity for the
++ * CPU coming alive. */
++static void unbind_zero(int src_cpu)
++{
++ int unbound = 0, zerobound = 0;
++ struct task_struct *p, *t;
++
++ if (src_cpu == 0)
++ return;
++
++ do_each_thread(t, p) {
++ if (!p->mm)
++ p->zerobound = false;
++ if (p->zerobound) {
++ unbound++;
++ cpumask_set_cpu(src_cpu, &p->cpus_allowed);
++ /* Once every CPU affinity has been re-enabled, remove
++ * the zerobound flag */
++ if (cpumask_subset(cpu_possible_mask, &p->cpus_allowed)) {
++ p->zerobound = false;
++ zerobound++;
++ }
++ }
++ } while_each_thread(t, p);
++
++ if (unbound) {
++ printk(KERN_INFO "Added affinity for %d processes to cpu %d\n",
++ unbound, src_cpu);
++ }
++ if (zerobound) {
++ printk(KERN_INFO "Released forced binding to cpu0 for %d processes\n",
++ zerobound);
++ }
++}
++
++/*
++ * Ensure that the idle task is using init_mm right before its cpu goes
++ * offline.
++ */
++void idle_task_exit(void)
++{
++ struct mm_struct *mm = current->active_mm;
++
++ BUG_ON(cpu_online(smp_processor_id()));
++
++ if (mm != &init_mm) {
++ switch_mm(mm, &init_mm, current);
++ current->active_mm = &init_mm;
++ finish_arch_post_lock_switch();
++ }
++ mmdrop(mm);
++}
++#else /* CONFIG_HOTPLUG_CPU */
++static void unbind_zero(int src_cpu) {}
++#endif /* CONFIG_HOTPLUG_CPU */
++
++void sched_set_stop_task(int cpu, struct task_struct *stop)
++{
++ struct sched_param stop_param = { .sched_priority = STOP_PRIO };
++ struct sched_param start_param = { .sched_priority = 0 };
++ struct task_struct *old_stop = cpu_rq(cpu)->stop;
++
++ if (stop) {
++ /*
++ * Make it appear like a SCHED_FIFO task, its something
++ * userspace knows about and won't get confused about.
++ *
++ * Also, it will make PI more or less work without too
++ * much confusion -- but then, stop work should not
++ * rely on PI working anyway.
++ */
++ sched_setscheduler_nocheck(stop, SCHED_FIFO, &stop_param);
++ }
++
++ cpu_rq(cpu)->stop = stop;
++
++ if (old_stop) {
++ /*
++ * Reset it back to a normal scheduling policy so that
++ * it can die in pieces.
++ */
++ sched_setscheduler_nocheck(old_stop, SCHED_NORMAL, &start_param);
++ }
++}
++
++#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SYSCTL)
++
++static struct ctl_table sd_ctl_dir[] = {
++ {
++ .procname = "sched_domain",
++ .mode = 0555,
++ },
++ {}
++};
++
++static struct ctl_table sd_ctl_root[] = {
++ {
++ .procname = "kernel",
++ .mode = 0555,
++ .child = sd_ctl_dir,
++ },
++ {}
++};
++
++static struct ctl_table *sd_alloc_ctl_entry(int n)
++{
++ struct ctl_table *entry =
++ kcalloc(n, sizeof(struct ctl_table), GFP_KERNEL);
++
++ return entry;
++}
++
++static void sd_free_ctl_entry(struct ctl_table **tablep)
++{
++ struct ctl_table *entry;
++
++ /*
++ * In the intermediate directories, both the child directory and
++ * procname are dynamically allocated and could fail but the mode
++ * will always be set. In the lowest directory the names are
++ * static strings and all have proc handlers.
++ */
++ for (entry = *tablep; entry->mode; entry++) {
++ if (entry->child)
++ sd_free_ctl_entry(&entry->child);
++ if (entry->proc_handler == NULL)
++ kfree(entry->procname);
++ }
++
++ kfree(*tablep);
++ *tablep = NULL;
++}
++
++#define CPU_LOAD_IDX_MAX 5
++static int min_load_idx = 0;
++static int max_load_idx = CPU_LOAD_IDX_MAX-1;
++
++static void
++set_table_entry(struct ctl_table *entry,
++ const char *procname, void *data, int maxlen,
++ umode_t mode, proc_handler *proc_handler,
++ bool load_idx)
++{
++ entry->procname = procname;
++ entry->data = data;
++ entry->maxlen = maxlen;
++ entry->mode = mode;
++ entry->proc_handler = proc_handler;
++
++ if (load_idx) {
++ entry->extra1 = &min_load_idx;
++ entry->extra2 = &max_load_idx;
++ }
++}
++
++static struct ctl_table *
++sd_alloc_ctl_domain_table(struct sched_domain *sd)
++{
++ struct ctl_table *table = sd_alloc_ctl_entry(14);
++
++ if (table == NULL)
++ return NULL;
++
++ set_table_entry(&table[0], "min_interval", &sd->min_interval,
++ sizeof(long), 0644, proc_doulongvec_minmax, false);
++ set_table_entry(&table[1], "max_interval", &sd->max_interval,
++ sizeof(long), 0644, proc_doulongvec_minmax, false);
++ set_table_entry(&table[2], "busy_idx", &sd->busy_idx,
++ sizeof(int), 0644, proc_dointvec_minmax, true);
++ set_table_entry(&table[3], "idle_idx", &sd->idle_idx,
++ sizeof(int), 0644, proc_dointvec_minmax, true);
++ set_table_entry(&table[4], "newidle_idx", &sd->newidle_idx,
++ sizeof(int), 0644, proc_dointvec_minmax, true);
++ set_table_entry(&table[5], "wake_idx", &sd->wake_idx,
++ sizeof(int), 0644, proc_dointvec_minmax, true);
++ set_table_entry(&table[6], "forkexec_idx", &sd->forkexec_idx,
++ sizeof(int), 0644, proc_dointvec_minmax, true);
++ set_table_entry(&table[7], "busy_factor", &sd->busy_factor,
++ sizeof(int), 0644, proc_dointvec_minmax, false);
++ set_table_entry(&table[8], "imbalance_pct", &sd->imbalance_pct,
++ sizeof(int), 0644, proc_dointvec_minmax, false);
++ set_table_entry(&table[9], "cache_nice_tries",
++ &sd->cache_nice_tries,
++ sizeof(int), 0644, proc_dointvec_minmax, false);
++ set_table_entry(&table[10], "flags", &sd->flags,
++ sizeof(int), 0644, proc_dointvec_minmax, false);
++ set_table_entry(&table[11], "max_newidle_lb_cost",
++ &sd->max_newidle_lb_cost,
++ sizeof(long), 0644, proc_doulongvec_minmax, false);
++ set_table_entry(&table[12], "name", sd->name,
++ CORENAME_MAX_SIZE, 0444, proc_dostring, false);
++ /* &table[13] is terminator */
++
++ return table;
++}
++
++static struct ctl_table *sd_alloc_ctl_cpu_table(int cpu)
++{
++ struct ctl_table *entry, *table;
++ struct sched_domain *sd;
++ int domain_num = 0, i;
++ char buf[32];
++
++ for_each_domain(cpu, sd)
++ domain_num++;
++ entry = table = sd_alloc_ctl_entry(domain_num + 1);
++ if (table == NULL)
++ return NULL;
++
++ i = 0;
++ for_each_domain(cpu, sd) {
++ snprintf(buf, 32, "domain%d", i);
++ entry->procname = kstrdup(buf, GFP_KERNEL);
++ entry->mode = 0555;
++ entry->child = sd_alloc_ctl_domain_table(sd);
++ entry++;
++ i++;
++ }
++ return table;
++}
++
++static cpumask_var_t sd_sysctl_cpus;
++static struct ctl_table_header *sd_sysctl_header;
++
++void register_sched_domain_sysctl(void)
++{
++ static struct ctl_table *cpu_entries;
++ static struct ctl_table **cpu_idx;
++ char buf[32];
++ int i;
++
++ if (!cpu_entries) {
++ cpu_entries = sd_alloc_ctl_entry(num_possible_cpus() + 1);
++ if (!cpu_entries)
++ return;
++
++ WARN_ON(sd_ctl_dir[0].child);
++ sd_ctl_dir[0].child = cpu_entries;
++ }
++
++ if (!cpu_idx) {
++ struct ctl_table *e = cpu_entries;
++
++ cpu_idx = kcalloc(nr_cpu_ids, sizeof(struct ctl_table*), GFP_KERNEL);
++ if (!cpu_idx)
++ return;
++
++ /* deal with sparse possible map */
++ for_each_possible_cpu(i) {
++ cpu_idx[i] = e;
++ e++;
++ }
++ }
++
++ if (!cpumask_available(sd_sysctl_cpus)) {
++ if (!alloc_cpumask_var(&sd_sysctl_cpus, GFP_KERNEL))
++ return;
++
++ /* init to possible to not have holes in @cpu_entries */
++ cpumask_copy(sd_sysctl_cpus, cpu_possible_mask);
++ }
++
++ for_each_cpu(i, sd_sysctl_cpus) {
++ struct ctl_table *e = cpu_idx[i];
++
++ if (e->child)
++ sd_free_ctl_entry(&e->child);
++
++ if (!e->procname) {
++ snprintf(buf, 32, "cpu%d", i);
++ e->procname = kstrdup(buf, GFP_KERNEL);
++ }
++ e->mode = 0555;
++ e->child = sd_alloc_ctl_cpu_table(i);
++
++ __cpumask_clear_cpu(i, sd_sysctl_cpus);
++ }
++
++ WARN_ON(sd_sysctl_header);
++ sd_sysctl_header = register_sysctl_table(sd_ctl_root);
++}
++
++void dirty_sched_domain_sysctl(int cpu)
++{
++ if (cpumask_available(sd_sysctl_cpus))
++ __cpumask_set_cpu(cpu, sd_sysctl_cpus);
++}
++
++/* may be called multiple times per register */
++void unregister_sched_domain_sysctl(void)
++{
++ unregister_sysctl_table(sd_sysctl_header);
++ sd_sysctl_header = NULL;
++}
++#endif /* CONFIG_SYSCTL */
++
++void set_rq_online(struct rq *rq)
++{
++ if (!rq->online) {
++ cpumask_set_cpu(cpu_of(rq), rq->rd->online);
++ rq->online = true;
++ }
++}
++
++void set_rq_offline(struct rq *rq)
++{
++ if (rq->online) {
++ int cpu = cpu_of(rq);
++
++ cpumask_clear_cpu(cpu, rq->rd->online);
++ rq->online = false;
++ clear_cpuidle_map(cpu);
++ }
++}
++
++/*
++ * used to mark begin/end of suspend/resume:
++ */
++static int num_cpus_frozen;
++
++/*
++ * Update cpusets according to cpu_active mask. If cpusets are
++ * disabled, cpuset_update_active_cpus() becomes a simple wrapper
++ * around partition_sched_domains().
++ *
++ * If we come here as part of a suspend/resume, don't touch cpusets because we
++ * want to restore it back to its original state upon resume anyway.
++ */
++static void cpuset_cpu_active(void)
++{
++ if (cpuhp_tasks_frozen) {
++ /*
++ * num_cpus_frozen tracks how many CPUs are involved in suspend
++ * resume sequence. As long as this is not the last online
++ * operation in the resume sequence, just build a single sched
++ * domain, ignoring cpusets.
++ */
++ partition_sched_domains(1, NULL, NULL);
++ if (--num_cpus_frozen)
++ return;
++ /*
++ * This is the last CPU online operation. So fall through and
++ * restore the original sched domains by considering the
++ * cpuset configurations.
++ */
++ cpuset_force_rebuild();
++ }
++
++ cpuset_update_active_cpus();
++}
++
++static int cpuset_cpu_inactive(unsigned int cpu)
++{
++ if (!cpuhp_tasks_frozen) {
++ cpuset_update_active_cpus();
++ } else {
++ num_cpus_frozen++;
++ partition_sched_domains(1, NULL, NULL);
++ }
++ return 0;
++}
++
++int sched_cpu_activate(unsigned int cpu)
++{
++ struct rq *rq = cpu_rq(cpu);
++ struct rq_flags rf;
++
++ set_cpu_active(cpu, true);
++
++ if (sched_smp_initialized) {
++ sched_domains_numa_masks_set(cpu);
++ cpuset_cpu_active();
++ }
++
++ /*
++ * Put the rq online, if not already. This happens:
++ *
++ * 1) In the early boot process, because we build the real domains
++ * after all CPUs have been brought up.
++ *
++ * 2) At runtime, if cpuset_cpu_active() fails to rebuild the
++ * domains.
++ */
++ rq_lock_irqsave(rq, &rf);
++ if (rq->rd) {
++ BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
++ set_rq_online(rq);
++ }
++ unbind_zero(cpu);
++ rq_unlock_irqrestore(rq, &rf);
++
++ return 0;
++}
++
++int sched_cpu_deactivate(unsigned int cpu)
++{
++ int ret;
++
++ set_cpu_active(cpu, false);
++ /*
++ * We've cleared cpu_active_mask, wait for all preempt-disabled and RCU
++ * users of this state to go away such that all new such users will
++ * observe it.
++ *
++ * Do sync before park smpboot threads to take care the rcu boost case.
++ */
++ synchronize_rcu();
++
++ if (!sched_smp_initialized)
++ return 0;
++
++ ret = cpuset_cpu_inactive(cpu);
++ if (ret) {
++ set_cpu_active(cpu, true);
++ return ret;
++ }
++ sched_domains_numa_masks_clear(cpu);
++ return 0;
++}
++
++int sched_cpu_starting(unsigned int cpu)
++{
++ sched_tick_start(cpu);
++ return 0;
++}
++
++#ifdef CONFIG_HOTPLUG_CPU
++int sched_cpu_dying(unsigned int cpu)
++{
++ struct rq *rq = cpu_rq(cpu);
++ unsigned long flags;
++
++ /* Handle pending wakeups and then migrate everything off */
++ sched_ttwu_pending();
++ sched_tick_stop(cpu);
++
++ local_irq_save(flags);
++ double_rq_lock(rq, cpu_rq(0));
++ if (rq->rd) {
++ BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
++ set_rq_offline(rq);
++ }
++ bind_zero(cpu);
++ double_rq_unlock(rq, cpu_rq(0));
++ sched_start_tick(rq, cpu);
++ hrexpiry_clear(rq);
++ local_irq_restore(flags);
++
++ return 0;
++}
++#endif
++
++#if defined(CONFIG_SCHED_SMT) || defined(CONFIG_SCHED_MC)
++/*
++ * Cheaper version of the below functions in case support for SMT and MC is
++ * compiled in but CPUs have no siblings.
++ */
++static bool sole_cpu_idle(struct rq *rq)
++{
++ return rq_idle(rq);
++}
++#endif
++#ifdef CONFIG_SCHED_SMT
++static const cpumask_t *thread_cpumask(int cpu)
++{
++ return topology_sibling_cpumask(cpu);
++}
++/* All this CPU's SMT siblings are idle */
++static bool siblings_cpu_idle(struct rq *rq)
++{
++ return cpumask_subset(&rq->thread_mask, &cpu_idle_map);
++}
++#endif
++#ifdef CONFIG_SCHED_MC
++static const cpumask_t *core_cpumask(int cpu)
++{
++ return topology_core_cpumask(cpu);
++}
++/* All this CPU's shared cache siblings are idle */
++static bool cache_cpu_idle(struct rq *rq)
++{
++ return cpumask_subset(&rq->core_mask, &cpu_idle_map);
++}
++#endif
++
++enum sched_domain_level {
++ SD_LV_NONE = 0,
++ SD_LV_SIBLING,
++ SD_LV_MC,
++ SD_LV_BOOK,
++ SD_LV_CPU,
++ SD_LV_NODE,
++ SD_LV_ALLNODES,
++ SD_LV_MAX
++};
++
++void __init sched_init_smp(void)
++{
++ struct rq *rq, *other_rq, *leader = cpu_rq(0);
++ struct sched_domain *sd;
++ int cpu, other_cpu, i;
++#ifdef CONFIG_SCHED_SMT
++ bool smt_threads = false;
++#endif
++ sched_init_numa();
++
++ /*
++ * There's no userspace yet to cause hotplug operations; hence all the
++ * cpu masks are stable and all blatant races in the below code cannot
++ * happen.
++ */
++ mutex_lock(&sched_domains_mutex);
++ sched_init_domains(cpu_active_mask);
++ mutex_unlock(&sched_domains_mutex);
++
++ /* Move init over to a non-isolated CPU */
++ if (set_cpus_allowed_ptr(current, housekeeping_cpumask(HK_FLAG_DOMAIN)) < 0)
++ BUG();
++
++ local_irq_disable();
++ mutex_lock(&sched_domains_mutex);
++ lock_all_rqs();
++ /*
++ * Set up the relative cache distance of each online cpu from each
++ * other in a simple array for quick lookup. Locality is determined
++ * by the closest sched_domain that CPUs are separated by. CPUs with
++ * shared cache in SMT and MC are treated as local. Separate CPUs
++ * (within the same package or physically) within the same node are
++ * treated as not local. CPUs not even in the same domain (different
++ * nodes) are treated as very distant.
++ */
++ for_each_online_cpu(cpu) {
++ rq = cpu_rq(cpu);
++
++ /* First check if this cpu is in the same node */
++ for_each_domain(cpu, sd) {
++ if (sd->level > SD_LV_MC)
++ continue;
++ if (rqshare != RQSHARE_ALL)
++ leader = NULL;
++ /* Set locality to local node if not already found lower */
++ for_each_cpu(other_cpu, sched_domain_span(sd)) {
++ if (rqshare >= RQSHARE_SMP) {
++ other_rq = cpu_rq(other_cpu);
++
++ /* Set the smp_leader to the first CPU */
++ if (!leader)
++ leader = rq;
++ other_rq->smp_leader = leader;
++ }
++
++ if (rq->cpu_locality[other_cpu] > 3)
++ rq->cpu_locality[other_cpu] = 3;
++ }
++ }
++
++ /*
++ * Each runqueue has its own function in case it doesn't have
++ * siblings of its own allowing mixed topologies.
++ */
++#ifdef CONFIG_SCHED_MC
++ leader = NULL;
++ if (cpumask_weight(core_cpumask(cpu)) > 1) {
++ cpumask_copy(&rq->core_mask, core_cpumask(cpu));
++ cpumask_clear_cpu(cpu, &rq->core_mask);
++ for_each_cpu(other_cpu, core_cpumask(cpu)) {
++ if (rqshare == RQSHARE_MC) {
++ other_rq = cpu_rq(other_cpu);
++
++ /* Set the mc_leader to the first CPU */
++ if (!leader)
++ leader = rq;
++ other_rq->mc_leader = leader;
++ }
++ if (rq->cpu_locality[other_cpu] > 2)
++ rq->cpu_locality[other_cpu] = 2;
++ }
++ rq->cache_idle = cache_cpu_idle;
++ }
++#endif
++#ifdef CONFIG_SCHED_SMT
++ leader = NULL;
++ if (cpumask_weight(thread_cpumask(cpu)) > 1) {
++ cpumask_copy(&rq->thread_mask, thread_cpumask(cpu));
++ cpumask_clear_cpu(cpu, &rq->thread_mask);
++ for_each_cpu(other_cpu, thread_cpumask(cpu)) {
++ if (rqshare == RQSHARE_SMT) {
++ other_rq = cpu_rq(other_cpu);
++
++ /* Set the smt_leader to the first CPU */
++ if (!leader)
++ leader = rq;
++ other_rq->smt_leader = leader;
++ }
++ if (rq->cpu_locality[other_cpu] > 1)
++ rq->cpu_locality[other_cpu] = 1;
++ }
++ rq->siblings_idle = siblings_cpu_idle;
++ smt_threads = true;
++ }
++#endif
++ }
++
++#ifdef CONFIG_SMT_NICE
++ if (smt_threads) {
++ check_siblings = &check_smt_siblings;
++ wake_siblings = &wake_smt_siblings;
++ smt_schedule = &smt_should_schedule;
++ }
++#endif
++ unlock_all_rqs();
++ mutex_unlock(&sched_domains_mutex);
++
++ for_each_online_cpu(cpu) {
++ rq = cpu_rq(cpu);
++
++ for_each_online_cpu(other_cpu) {
++ if (other_cpu <= cpu)
++ continue;
++ printk(KERN_DEBUG "MuQSS locality CPU %d to %d: %d\n", cpu, other_cpu, rq->cpu_locality[other_cpu]);
++ }
++ }
++
++ for_each_online_cpu(cpu) {
++ rq = cpu_rq(cpu);
++ leader = rq->smp_leader;
++
++ rq_lock(rq);
++ if (leader && rq != leader) {
++ printk(KERN_INFO "Sharing SMP runqueue from CPU %d to CPU %d\n",
++ leader->cpu, rq->cpu);
++ kfree(rq->node);
++ kfree(rq->sl);
++ kfree(rq->lock);
++ rq->node = leader->node;
++ rq->sl = leader->sl;
++ rq->lock = leader->lock;
++ barrier();
++ /* To make up for not unlocking the freed runlock */
++ preempt_enable();
++ } else
++ rq_unlock(rq);
++ }
++
++#ifdef CONFIG_SCHED_MC
++ for_each_online_cpu(cpu) {
++ rq = cpu_rq(cpu);
++ leader = rq->mc_leader;
++
++ rq_lock(rq);
++ if (leader && rq != leader) {
++ printk(KERN_INFO "Sharing MC runqueue from CPU %d to CPU %d\n",
++ leader->cpu, rq->cpu);
++ kfree(rq->node);
++ kfree(rq->sl);
++ kfree(rq->lock);
++ rq->node = leader->node;
++ rq->sl = leader->sl;
++ rq->lock = leader->lock;
++ barrier();
++ /* To make up for not unlocking the freed runlock */
++ preempt_enable();
++ } else
++ rq_unlock(rq);
++ }
++#endif /* CONFIG_SCHED_MC */
++
++#ifdef CONFIG_SCHED_SMT
++ for_each_online_cpu(cpu) {
++ rq = cpu_rq(cpu);
++
++ leader = rq->smt_leader;
++
++ rq_lock(rq);
++ if (leader && rq != leader) {
++ printk(KERN_INFO "Sharing SMT runqueue from CPU %d to CPU %d\n",
++ leader->cpu, rq->cpu);
++ kfree(rq->node);
++ kfree(rq->sl);
++ kfree(rq->lock);
++ rq->node = leader->node;
++ rq->sl = leader->sl;
++ rq->lock = leader->lock;
++ barrier();
++ /* To make up for not unlocking the freed runlock */
++ preempt_enable();
++ } else
++ rq_unlock(rq);
++ }
++#endif /* CONFIG_SCHED_SMT */
++
++ local_irq_enable();
++
++ total_runqueues = 0;
++ for_each_possible_cpu(cpu) {
++ int locality, total_rqs = 0, total_cpus = 0;
++
++ rq = cpu_rq(cpu);
++ if (
++#ifdef CONFIG_SCHED_MC
++ (rq->mc_leader == rq) &&
++#endif
++#ifdef CONFIG_SCHED_SMT
++ (rq->smt_leader == rq) &&
++#endif
++ (rq->smp_leader == rq))
++ total_runqueues++;
++
++ for (locality = 0; locality <= 4; locality++) {
++ int test_cpu;
++
++ for_each_possible_cpu(test_cpu) {
++ /* Work from each CPU up instead of every rq
++ * starting at CPU 0. Orders are better matched
++ * if the top half CPUs count down instead. */
++ if (cpu < num_possible_cpus() / 2)
++ other_cpu = cpu + test_cpu;
++ else
++ other_cpu = cpu - test_cpu;
++ if (other_cpu < 0)
++ other_cpu += num_possible_cpus();
++ else
++ other_cpu %= num_possible_cpus();
++ other_rq = cpu_rq(other_cpu);
++
++ if (rq->cpu_locality[other_cpu] == locality) {
++ rq->cpu_order[total_cpus++] = other_rq;
++ if (
++
++#ifdef CONFIG_SCHED_MC
++ (other_rq->mc_leader == other_rq) &&
++#endif
++#ifdef CONFIG_SCHED_SMT
++ (other_rq->smt_leader == other_rq) &&
++#endif
++ (other_rq->smp_leader == other_rq))
++ rq->rq_order[total_rqs++] = other_rq;
++ }
++ }
++ }
++ }
++
++ for_each_possible_cpu(cpu) {
++ rq = cpu_rq(cpu);
++ for (i = 0; i < total_runqueues; i++) {
++ printk(KERN_DEBUG "CPU %d RQ order %d RQ %d\n", cpu, i,
++ rq->rq_order[i]->cpu);
++ }
++ }
++ for_each_possible_cpu(cpu) {
++ rq = cpu_rq(cpu);
++ for (i = 0; i < num_possible_cpus(); i++) {
++ printk(KERN_DEBUG "CPU %d CPU order %d RQ %d\n", cpu, i,
++ rq->cpu_order[i]->cpu);
++ }
++ }
++ switch (rqshare) {
++ case RQSHARE_ALL:
++ /* This should only ever read 1 */
++ printk(KERN_INFO "MuQSS runqueue share type ALL total runqueues: %d\n",
++ total_runqueues);
++ break;
++ case RQSHARE_SMP:
++ printk(KERN_INFO "MuQSS runqueue share type SMP total runqueues: %d\n",
++ total_runqueues);
++ break;
++ case RQSHARE_MC:
++ printk(KERN_INFO "MuQSS runqueue share type MC total runqueues: %d\n",
++ total_runqueues);
++ break;
++ case RQSHARE_SMT:
++ printk(KERN_INFO "MuQSS runqueue share type SMT total runqueues: %d\n",
++ total_runqueues);
++ break;
++ case RQSHARE_NONE:
++ printk(KERN_INFO "MuQSS runqueue share type NONE total runqueues: %d\n",
++ total_runqueues);
++ break;
++ }
++
++ sched_smp_initialized = true;
++}
++#else
++void __init sched_init_smp(void)
++{
++ sched_smp_initialized = true;
++}
++#endif /* CONFIG_SMP */
++
++int in_sched_functions(unsigned long addr)
++{
++ return in_lock_functions(addr) ||
++ (addr >= (unsigned long)__sched_text_start
++ && addr < (unsigned long)__sched_text_end);
++}
++
++#ifdef CONFIG_CGROUP_SCHED
++/* task group related information */
++struct task_group {
++ struct cgroup_subsys_state css;
++
++ struct rcu_head rcu;
++ struct list_head list;
++
++ struct task_group *parent;
++ struct list_head siblings;
++ struct list_head children;
++};
++
++/*
++ * Default task group.
++ * Every task in system belongs to this group at bootup.
++ */
++struct task_group root_task_group;
++LIST_HEAD(task_groups);
++
++/* Cacheline aligned slab cache for task_group */
++static struct kmem_cache *task_group_cache __read_mostly;
++#endif /* CONFIG_CGROUP_SCHED */
++
++void __init sched_init(void)
++{
++#ifdef CONFIG_SMP
++ int cpu_ids;
++#endif
++ int i;
++ struct rq *rq;
++
++ wait_bit_init();
++
++ prio_ratios[0] = 128;
++ for (i = 1 ; i < NICE_WIDTH ; i++)
++ prio_ratios[i] = prio_ratios[i - 1] * 11 / 10;
++
++ skiplist_node_init(&init_task.node);
++
++#ifdef CONFIG_SMP
++ init_defrootdomain();
++ cpumask_clear(&cpu_idle_map);
++#else
++ uprq = &per_cpu(runqueues, 0);
++#endif
++
++#ifdef CONFIG_CGROUP_SCHED
++ task_group_cache = KMEM_CACHE(task_group, 0);
++
++ list_add(&root_task_group.list, &task_groups);
++ INIT_LIST_HEAD(&root_task_group.children);
++ INIT_LIST_HEAD(&root_task_group.siblings);
++#endif /* CONFIG_CGROUP_SCHED */
++ for_each_possible_cpu(i) {
++ rq = cpu_rq(i);
++ rq->node = kmalloc(sizeof(skiplist_node), GFP_ATOMIC);
++ skiplist_init(rq->node);
++ rq->sl = new_skiplist(rq->node);
++ rq->lock = kmalloc(sizeof(raw_spinlock_t), GFP_ATOMIC);
++ raw_spin_lock_init(rq->lock);
++ rq->nr_running = 0;
++ rq->nr_uninterruptible = 0;
++ rq->nr_switches = 0;
++ rq->clock = rq->old_clock = rq->last_niffy = rq->niffies = 0;
++ rq->last_jiffy = jiffies;
++ rq->user_ns = rq->nice_ns = rq->softirq_ns = rq->system_ns =
++ rq->iowait_ns = rq->idle_ns = 0;
++ rq->dither = 0;
++ set_rq_task(rq, &init_task);
++ rq->iso_ticks = 0;
++ rq->iso_refractory = false;
++#ifdef CONFIG_SMP
++ rq->smp_leader = rq;
++#ifdef CONFIG_SCHED_MC
++ rq->mc_leader = rq;
++#endif
++#ifdef CONFIG_SCHED_SMT
++ rq->smt_leader = rq;
++#endif
++ rq->sd = NULL;
++ rq->rd = NULL;
++ rq->online = false;
++ rq->cpu = i;
++ rq_attach_root(rq, &def_root_domain);
++#endif
++ init_rq_hrexpiry(rq);
++ atomic_set(&rq->nr_iowait, 0);
++ }
++
++#ifdef CONFIG_SMP
++ cpu_ids = i;
++ /*
++ * Set the base locality for cpu cache distance calculation to
++ * "distant" (3). Make sure the distance from a CPU to itself is 0.
++ */
++ for_each_possible_cpu(i) {
++ int j;
++
++ rq = cpu_rq(i);
++#ifdef CONFIG_SCHED_SMT
++ rq->siblings_idle = sole_cpu_idle;
++#endif
++#ifdef CONFIG_SCHED_MC
++ rq->cache_idle = sole_cpu_idle;
++#endif
++ rq->cpu_locality = kmalloc(cpu_ids * sizeof(int *), GFP_ATOMIC);
++ for_each_possible_cpu(j) {
++ if (i == j)
++ rq->cpu_locality[j] = 0;
++ else
++ rq->cpu_locality[j] = 4;
++ }
++ rq->rq_order = kmalloc(cpu_ids * sizeof(struct rq *), GFP_ATOMIC);
++ rq->cpu_order = kmalloc(cpu_ids * sizeof(struct rq *), GFP_ATOMIC);
++ rq->rq_order[0] = rq->cpu_order[0] = rq;
++ for (j = 1; j < cpu_ids; j++)
++ rq->rq_order[j] = rq->cpu_order[j] = cpu_rq(j);
++ }
++#endif
++
++ /*
++ * The boot idle thread does lazy MMU switching as well:
++ */
++ mmgrab(&init_mm);
++ enter_lazy_tlb(&init_mm, current);
++
++ /*
++ * Make us the idle thread. Technically, schedule() should not be
++ * called from this thread, however somewhere below it might be,
++ * but because we are the idle thread, we just pick up running again
++ * when this runqueue becomes "idle".
++ */
++ init_idle(current, smp_processor_id());
++
++#ifdef CONFIG_SMP
++ idle_thread_set_boot_cpu();
++#endif /* SMP */
++
++ init_schedstats();
++
++ psi_init();
++}
++
++#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
++static inline int preempt_count_equals(int preempt_offset)
++{
++ int nested = preempt_count() + rcu_preempt_depth();
++
++ return (nested == preempt_offset);
++}
++
++void __might_sleep(const char *file, int line, int preempt_offset)
++{
++ /*
++ * Blocking primitives will set (and therefore destroy) current->state,
++ * since we will exit with TASK_RUNNING make sure we enter with it,
++ * otherwise we will destroy state.
++ */
++ WARN_ONCE(current->state != TASK_RUNNING && current->task_state_change,
++ "do not call blocking ops when !TASK_RUNNING; "
++ "state=%lx set at [<%p>] %pS\n",
++ current->state,
++ (void *)current->task_state_change,
++ (void *)current->task_state_change);
++
++ ___might_sleep(file, line, preempt_offset);
++}
++EXPORT_SYMBOL(__might_sleep);
++
++void __cant_sleep(const char *file, int line, int preempt_offset)
++{
++ static unsigned long prev_jiffy;
++
++ if (irqs_disabled())
++ return;
++
++ if (!IS_ENABLED(CONFIG_PREEMPT_COUNT))
++ return;
++
++ if (preempt_count() > preempt_offset)
++ return;
++
++ if (time_before(jiffies, prev_jiffy + HZ) && prev_jiffy)
++ return;
++ prev_jiffy = jiffies;
++
++ printk(KERN_ERR "BUG: assuming atomic context at %s:%d\n", file, line);
++ printk(KERN_ERR "in_atomic(): %d, irqs_disabled(): %d, pid: %d, name: %s\n",
++ in_atomic(), irqs_disabled(),
++ current->pid, current->comm);
++
++ debug_show_held_locks(current);
++ dump_stack();
++ add_taint(TAINT_WARN, LOCKDEP_STILL_OK);
++}
++EXPORT_SYMBOL_GPL(__cant_sleep);
++
++void ___might_sleep(const char *file, int line, int preempt_offset)
++{
++ /* Ratelimiting timestamp: */
++ static unsigned long prev_jiffy;
++
++ unsigned long preempt_disable_ip;
++
++ /* WARN_ON_ONCE() by default, no rate limit required: */
++ rcu_sleep_check();
++
++ if ((preempt_count_equals(preempt_offset) && !irqs_disabled() &&
++ !is_idle_task(current)) ||
++ system_state == SYSTEM_BOOTING || system_state > SYSTEM_RUNNING ||
++ oops_in_progress)
++ return;
++
++ if (time_before(jiffies, prev_jiffy + HZ) && prev_jiffy)
++ return;
++ prev_jiffy = jiffies;
++
++ /* Save this before calling printk(), since that will clobber it: */
++ preempt_disable_ip = get_preempt_disable_ip(current);
++
++ printk(KERN_ERR
++ "BUG: sleeping function called from invalid context at %s:%d\n",
++ file, line);
++ printk(KERN_ERR
++ "in_atomic(): %d, irqs_disabled(): %d, pid: %d, name: %s\n",
++ in_atomic(), irqs_disabled(),
++ current->pid, current->comm);
++
++ if (task_stack_end_corrupted(current))
++ printk(KERN_EMERG "Thread overran stack, or stack corrupted\n");
++
++ debug_show_held_locks(current);
++ if (irqs_disabled())
++ print_irqtrace_events(current);
++ if (IS_ENABLED(CONFIG_DEBUG_PREEMPT)
++ && !preempt_count_equals(preempt_offset)) {
++ pr_err("Preemption disabled at:");
++ print_ip_sym(preempt_disable_ip);
++ pr_cont("\n");
++ }
++ dump_stack();
++ add_taint(TAINT_WARN, LOCKDEP_STILL_OK);
++}
++EXPORT_SYMBOL(___might_sleep);
++#endif
++
++#ifdef CONFIG_MAGIC_SYSRQ
++static inline void normalise_rt_tasks(void)
++{
++ struct task_struct *g, *p;
++ struct rq_flags rf;
++ struct rq *rq;
++
++ read_lock(&tasklist_lock);
++ for_each_process_thread(g, p) {
++ /*
++ * Only normalize user tasks:
++ */
++ if (p->flags & PF_KTHREAD)
++ continue;
++
++ if (!rt_task(p) && !iso_task(p))
++ continue;
++
++ rq = task_rq_lock(p, &rf);
++ __setscheduler(p, rq, SCHED_NORMAL, 0, false);
++ task_rq_unlock(rq, p, &rf);
++ }
++ read_unlock(&tasklist_lock);
++}
++
++void normalize_rt_tasks(void)
++{
++ normalise_rt_tasks();
++}
++#endif /* CONFIG_MAGIC_SYSRQ */
++
++#if defined(CONFIG_IA64) || defined(CONFIG_KGDB_KDB)
++/*
++ * These functions are only useful for the IA64 MCA handling, or kdb.
++ *
++ * They can only be called when the whole system has been
++ * stopped - every CPU needs to be quiescent, and no scheduling
++ * activity can take place. Using them for anything else would
++ * be a serious bug, and as a result, they aren't even visible
++ * under any other configuration.
++ */
++
++/**
++ * curr_task - return the current task for a given CPU.
++ * @cpu: the processor in question.
++ *
++ * ONLY VALID WHEN THE WHOLE SYSTEM IS STOPPED!
++ *
++ * Return: The current task for @cpu.
++ */
++struct task_struct *curr_task(int cpu)
++{
++ return cpu_curr(cpu);
++}
++
++#endif /* defined(CONFIG_IA64) || defined(CONFIG_KGDB_KDB) */
++
++#ifdef CONFIG_IA64
++/**
++ * set_curr_task - set the current task for a given CPU.
++ * @cpu: the processor in question.
++ * @p: the task pointer to set.
++ *
++ * Description: This function must only be used when non-maskable interrupts
++ * are serviced on a separate stack. It allows the architecture to switch the
++ * notion of the current task on a CPU in a non-blocking manner. This function
++ * must be called with all CPU's synchronised, and interrupts disabled, the
++ * and caller must save the original value of the current task (see
++ * curr_task() above) and restore that value before reenabling interrupts and
++ * re-starting the system.
++ *
++ * ONLY VALID WHEN THE WHOLE SYSTEM IS STOPPED!
++ */
++void ia64_set_curr_task(int cpu, struct task_struct *p)
++{
++ cpu_curr(cpu) = p;
++}
++
++#endif
++
++void init_idle_bootup_task(struct task_struct *idle)
++{}
++
++#ifdef CONFIG_SCHED_DEBUG
++__read_mostly bool sched_debug_enabled;
++
++void proc_sched_show_task(struct task_struct *p, struct pid_namespace *ns,
++ struct seq_file *m)
++{}
++
++void proc_sched_set_task(struct task_struct *p)
++{}
++#endif
++
++#ifdef CONFIG_CGROUP_SCHED
++static void sched_free_group(struct task_group *tg)
++{
++ kmem_cache_free(task_group_cache, tg);
++}
++
++/* allocate runqueue etc for a new task group */
++struct task_group *sched_create_group(struct task_group *parent)
++{
++ struct task_group *tg;
++
++ tg = kmem_cache_alloc(task_group_cache, GFP_KERNEL | __GFP_ZERO);
++ if (!tg)
++ return ERR_PTR(-ENOMEM);
++
++ return tg;
++}
++
++void sched_online_group(struct task_group *tg, struct task_group *parent)
++{
++}
++
++/* rcu callback to free various structures associated with a task group */
++static void sched_free_group_rcu(struct rcu_head *rhp)
++{
++ /* Now it should be safe to free those cfs_rqs */
++ sched_free_group(container_of(rhp, struct task_group, rcu));
++}
++
++void sched_destroy_group(struct task_group *tg)
++{
++ /* Wait for possible concurrent references to cfs_rqs complete */
++ call_rcu(&tg->rcu, sched_free_group_rcu);
++}
++
++void sched_offline_group(struct task_group *tg)
++{
++}
++
++static inline struct task_group *css_tg(struct cgroup_subsys_state *css)
++{
++ return css ? container_of(css, struct task_group, css) : NULL;
++}
++
++static struct cgroup_subsys_state *
++cpu_cgroup_css_alloc(struct cgroup_subsys_state *parent_css)
++{
++ struct task_group *parent = css_tg(parent_css);
++ struct task_group *tg;
++
++ if (!parent) {
++ /* This is early initialization for the top cgroup */
++ return &root_task_group.css;
++ }
++
++ tg = sched_create_group(parent);
++ if (IS_ERR(tg))
++ return ERR_PTR(-ENOMEM);
++ return &tg->css;
++}
++
++/* Expose task group only after completing cgroup initialization */
++static int cpu_cgroup_css_online(struct cgroup_subsys_state *css)
++{
++ struct task_group *tg = css_tg(css);
++ struct task_group *parent = css_tg(css->parent);
++
++ if (parent)
++ sched_online_group(tg, parent);
++ return 0;
++}
++
++static void cpu_cgroup_css_released(struct cgroup_subsys_state *css)
++{
++ struct task_group *tg = css_tg(css);
++
++ sched_offline_group(tg);
++}
++
++static void cpu_cgroup_css_free(struct cgroup_subsys_state *css)
++{
++ struct task_group *tg = css_tg(css);
++
++ /*
++ * Relies on the RCU grace period between css_released() and this.
++ */
++ sched_free_group(tg);
++}
++
++static void cpu_cgroup_fork(struct task_struct *task)
++{
++}
++
++static int cpu_cgroup_can_attach(struct cgroup_taskset *tset)
++{
++ return 0;
++}
++
++static void cpu_cgroup_attach(struct cgroup_taskset *tset)
++{
++}
++
++static struct cftype cpu_legacy_files[] = {
++ { } /* Terminate */
++};
++
++static struct cftype cpu_files[] = {
++ { } /* terminate */
++};
++
++static int cpu_extra_stat_show(struct seq_file *sf,
++ struct cgroup_subsys_state *css)
++{
++ return 0;
++}
++
++struct cgroup_subsys cpu_cgrp_subsys = {
++ .css_alloc = cpu_cgroup_css_alloc,
++ .css_online = cpu_cgroup_css_online,
++ .css_released = cpu_cgroup_css_released,
++ .css_free = cpu_cgroup_css_free,
++ .css_extra_stat_show = cpu_extra_stat_show,
++ .fork = cpu_cgroup_fork,
++ .can_attach = cpu_cgroup_can_attach,
++ .attach = cpu_cgroup_attach,
++ .legacy_cftypes = cpu_files,
++ .legacy_cftypes = cpu_legacy_files,
++ .dfl_cftypes = cpu_files,
++ .early_init = true,
++ .threaded = true,
++};
++#endif /* CONFIG_CGROUP_SCHED */
++
++#undef CREATE_TRACE_POINTS
+diff -Nur a/kernel/sched/MuQSS.h b/kernel/sched/MuQSS.h
+--- a/kernel/sched/MuQSS.h 1970-01-01 01:00:00.000000000 +0100
++++ b/kernel/sched/MuQSS.h 2019-07-07 09:17:41.261241813 +0100
+@@ -0,0 +1,957 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++#ifndef MUQSS_SCHED_H
++#define MUQSS_SCHED_H
++
++#include <linux/sched/clock.h>
++#include <linux/sched/cpufreq.h>
++#include <linux/sched/cputime.h>
++#include <linux/sched/debug.h>
++#include <linux/sched/hotplug.h>
++#include <linux/sched/init.h>
++#include <linux/sched/isolation.h>
++#include <linux/sched/mm.h>
++#include <linux/sched/nohz.h>
++#include <linux/sched/signal.h>
++#include <linux/sched/smt.h>
++#include <linux/sched/stat.h>
++#include <linux/sched/task.h>
++#include <linux/sched/task_stack.h>
++#include <linux/sched/topology.h>
++#include <linux/sched/wake_q.h>
++
++#include <uapi/linux/sched/types.h>
++
++#include <linux/cgroup.h>
++#include <linux/cpufreq.h>
++#include <linux/cpuidle.h>
++#include <linux/cpuset.h>
++#include <linux/ctype.h>
++#include <linux/energy_model.h>
++#include <linux/freezer.h>
++#include <linux/interrupt.h>
++#include <linux/kernel_stat.h>
++#include <linux/kthread.h>
++#include <linux/membarrier.h>
++#include <linux/livepatch.h>
++#include <linux/proc_fs.h>
++#include <linux/psi.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/skip_list.h>
++#include <linux/stop_machine.h>
++#include <linux/suspend.h>
++#include <linux/swait.h>
++#include <linux/syscalls.h>
++#include <linux/tick.h>
++#include <linux/tsacct_kern.h>
++#include <linux/u64_stats_sync.h>
++
++#ifdef CONFIG_PARAVIRT
++#include <asm/paravirt.h>
++#endif
++
++#include "cpupri.h"
++
++#ifdef CONFIG_SCHED_DEBUG
++# define SCHED_WARN_ON(x) WARN_ONCE(x, #x)
++#else
++# define SCHED_WARN_ON(x) ((void)(x))
++#endif
++
++/* task_struct::on_rq states: */
++#define TASK_ON_RQ_QUEUED 1
++#define TASK_ON_RQ_MIGRATING 2
++
++struct rq;
++
++#ifdef CONFIG_SMP
++
++static inline bool sched_asym_prefer(int a, int b)
++{
++ return arch_asym_cpu_priority(a) > arch_asym_cpu_priority(b);
++}
++
++struct perf_domain {
++ struct em_perf_domain *em_pd;
++ struct perf_domain *next;
++ struct rcu_head rcu;
++};
++
++/* Scheduling group status flags */
++#define SG_OVERLOAD 0x1 /* More than one runnable task on a CPU. */
++#define SG_OVERUTILIZED 0x2 /* One or more CPUs are over-utilized. */
++
++/*
++ * We add the notion of a root-domain which will be used to define per-domain
++ * variables. Each exclusive cpuset essentially defines an island domain by
++ * fully partitioning the member cpus from any other cpuset. Whenever a new
++ * exclusive cpuset is created, we also create and attach a new root-domain
++ * object.
++ *
++ */
++struct root_domain {
++ atomic_t refcount;
++ atomic_t rto_count;
++ struct rcu_head rcu;
++ cpumask_var_t span;
++ cpumask_var_t online;
++
++ /*
++ * Indicate pullable load on at least one CPU, e.g:
++ * - More than one runnable task
++ * - Running task is misfit
++ */
++ int overload;
++
++ /* Indicate one or more cpus over-utilized (tipping point) */
++ int overutilized;
++
++ /*
++ * The bit corresponding to a CPU gets set here if such CPU has more
++ * than one runnable -deadline task (as it is below for RT tasks).
++ */
++ cpumask_var_t dlo_mask;
++ atomic_t dlo_count;
++ /* Replace unused CFS structures with void */
++ //struct dl_bw dl_bw;
++ //struct cpudl cpudl;
++ void *dl_bw;
++ void *cpudl;
++
++ /*
++ * The "RT overload" flag: it gets set if a CPU has more than
++ * one runnable RT task.
++ */
++ cpumask_var_t rto_mask;
++ //struct cpupri cpupri;
++ void *cpupri;
++
++ unsigned long max_cpu_capacity;
++
++ /*
++ * NULL-terminated list of performance domains intersecting with the
++ * CPUs of the rd. Protected by RCU.
++ */
++ struct perf_domain *pd;
++};
++
++extern struct root_domain def_root_domain;
++extern struct mutex sched_domains_mutex;
++
++extern void init_defrootdomain(void);
++extern int sched_init_domains(const struct cpumask *cpu_map);
++extern void rq_attach_root(struct rq *rq, struct root_domain *rd);
++
++static inline void cpupri_cleanup(void __maybe_unused *cpupri)
++{
++}
++
++static inline void cpudl_cleanup(void __maybe_unused *cpudl)
++{
++}
++
++static inline void init_dl_bw(void __maybe_unused *dl_bw)
++{
++}
++
++static inline int cpudl_init(void __maybe_unused *dl_bw)
++{
++ return 0;
++}
++
++static inline int cpupri_init(void __maybe_unused *cpupri)
++{
++ return 0;
++}
++#endif /* CONFIG_SMP */
++
++/*
++ * This is the main, per-CPU runqueue data structure.
++ * This data should only be modified by the local cpu.
++ */
++struct rq {
++ raw_spinlock_t *lock;
++ raw_spinlock_t *orig_lock;
++
++ struct task_struct *curr, *idle, *stop;
++ struct mm_struct *prev_mm;
++
++ unsigned int nr_running;
++ /*
++ * This is part of a global counter where only the total sum
++ * over all CPUs matters. A task can increase this counter on
++ * one CPU and if it got migrated afterwards it may decrease
++ * it on another CPU. Always updated under the runqueue lock:
++ */
++ unsigned long nr_uninterruptible;
++ u64 nr_switches;
++
++ /* Stored data about rq->curr to work outside rq lock */
++ u64 rq_deadline;
++ int rq_prio;
++
++ /* Best queued id for use outside lock */
++ u64 best_key;
++
++ unsigned long last_scheduler_tick; /* Last jiffy this RQ ticked */
++ unsigned long last_jiffy; /* Last jiffy this RQ updated rq clock */
++ u64 niffies; /* Last time this RQ updated rq clock */
++ u64 last_niffy; /* Last niffies as updated by local clock */
++ u64 last_jiffy_niffies; /* Niffies @ last_jiffy */
++
++ u64 load_update; /* When we last updated load */
++ unsigned long load_avg; /* Rolling load average */
++#ifdef CONFIG_HAVE_SCHED_AVG_IRQ
++ u64 irq_load_update; /* When we last updated IRQ load */
++ unsigned long irq_load_avg; /* Rolling IRQ load average */
++#endif
++#ifdef CONFIG_SMT_NICE
++ struct mm_struct *rq_mm;
++ int rq_smt_bias; /* Policy/nice level bias across smt siblings */
++#endif
++ /* Accurate timekeeping data */
++ unsigned long user_ns, nice_ns, irq_ns, softirq_ns, system_ns,
++ iowait_ns, idle_ns;
++ atomic_t nr_iowait;
++
++ skiplist_node *node;
++ skiplist *sl;
++#ifdef CONFIG_SMP
++ struct task_struct *preempt; /* Preempt triggered on this task */
++ struct task_struct *preempting; /* Hint only, what task is preempting */
++
++ int cpu; /* cpu of this runqueue */
++ bool online;
++
++ struct root_domain *rd;
++ struct sched_domain *sd;
++
++ unsigned long cpu_capacity_orig;
++
++ int *cpu_locality; /* CPU relative cache distance */
++ struct rq **rq_order; /* Shared RQs ordered by relative cache distance */
++ struct rq **cpu_order; /* RQs of discrete CPUs ordered by distance */
++
++ struct rq *smp_leader; /* First physical CPU per node */
++#ifdef CONFIG_SCHED_SMT
++ struct rq *smt_leader; /* First logical CPU in SMT siblings */
++ cpumask_t thread_mask;
++ bool (*siblings_idle)(struct rq *rq);
++ /* See if all smt siblings are idle */
++#endif /* CONFIG_SCHED_SMT */
++#ifdef CONFIG_SCHED_MC
++ struct rq *mc_leader; /* First logical CPU in MC siblings */
++ cpumask_t core_mask;
++ bool (*cache_idle)(struct rq *rq);
++ /* See if all cache siblings are idle */
++#endif /* CONFIG_SCHED_MC */
++#endif /* CONFIG_SMP */
++#ifdef CONFIG_IRQ_TIME_ACCOUNTING
++ u64 prev_irq_time;
++#endif /* CONFIG_IRQ_TIME_ACCOUNTING */
++#ifdef CONFIG_PARAVIRT
++ u64 prev_steal_time;
++#endif /* CONFIG_PARAVIRT */
++#ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING
++ u64 prev_steal_time_rq;
++#endif /* CONFIG_PARAVIRT_TIME_ACCOUNTING */
++
++ u64 clock, old_clock, last_tick;
++ /* Ensure that all clocks are in the same cache line */
++ u64 clock_task ____cacheline_aligned;
++ int dither;
++
++ int iso_ticks;
++ bool iso_refractory;
++
++#ifdef CONFIG_HIGH_RES_TIMERS
++ struct hrtimer hrexpiry_timer;
++#endif
++
++ int rt_nr_running; /* Number real time tasks running */
++#ifdef CONFIG_SCHEDSTATS
++
++ /* latency stats */
++ struct sched_info rq_sched_info;
++ unsigned long long rq_cpu_time;
++ /* could above be rq->cfs_rq.exec_clock + rq->rt_rq.rt_runtime ? */
++
++ /* sys_sched_yield() stats */
++ unsigned int yld_count;
++
++ /* schedule() stats */
++ unsigned int sched_switch;
++ unsigned int sched_count;
++ unsigned int sched_goidle;
++
++ /* try_to_wake_up() stats */
++ unsigned int ttwu_count;
++ unsigned int ttwu_local;
++#endif /* CONFIG_SCHEDSTATS */
++
++#ifdef CONFIG_SMP
++ struct llist_head wake_list;
++#endif
++
++#ifdef CONFIG_CPU_IDLE
++ /* Must be inspected within a rcu lock section */
++ struct cpuidle_state *idle_state;
++#endif
++};
++
++struct rq_flags {
++ unsigned long flags;
++};
++
++#ifdef CONFIG_SMP
++struct rq *cpu_rq(int cpu);
++#endif
++
++#ifndef CONFIG_SMP
++extern struct rq *uprq;
++#define cpu_rq(cpu) (uprq)
++#define this_rq() (uprq)
++#define raw_rq() (uprq)
++#define task_rq(p) (uprq)
++#define cpu_curr(cpu) ((uprq)->curr)
++#else /* CONFIG_SMP */
++DECLARE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
++#define this_rq() this_cpu_ptr(&runqueues)
++#define raw_rq() raw_cpu_ptr(&runqueues)
++#define task_rq(p) cpu_rq(task_cpu(p))
++#endif /* CONFIG_SMP */
++
++static inline int task_current(struct rq *rq, struct task_struct *p)
++{
++ return rq->curr == p;
++}
++
++static inline int task_running(struct rq *rq, struct task_struct *p)
++{
++#ifdef CONFIG_SMP
++ return p->on_cpu;
++#else
++ return task_current(rq, p);
++#endif
++}
++
++static inline int task_on_rq_queued(struct task_struct *p)
++{
++ return p->on_rq == TASK_ON_RQ_QUEUED;
++}
++
++static inline int task_on_rq_migrating(struct task_struct *p)
++{
++ return READ_ONCE(p->on_rq) == TASK_ON_RQ_MIGRATING;
++}
++
++static inline void rq_lock(struct rq *rq)
++ __acquires(rq->lock)
++{
++ raw_spin_lock(rq->lock);
++}
++
++static inline void rq_unlock(struct rq *rq)
++ __releases(rq->lock)
++{
++ raw_spin_unlock(rq->lock);
++}
++
++static inline void rq_lock_irq(struct rq *rq)
++ __acquires(rq->lock)
++{
++ raw_spin_lock_irq(rq->lock);
++}
++
++static inline void rq_unlock_irq(struct rq *rq, struct rq_flags __always_unused *rf)
++ __releases(rq->lock)
++{
++ raw_spin_unlock_irq(rq->lock);
++}
++
++static inline void rq_lock_irqsave(struct rq *rq, struct rq_flags *rf)
++ __acquires(rq->lock)
++{
++ raw_spin_lock_irqsave(rq->lock, rf->flags);
++}
++
++static inline void rq_unlock_irqrestore(struct rq *rq, struct rq_flags *rf)
++ __releases(rq->lock)
++{
++ raw_spin_unlock_irqrestore(rq->lock, rf->flags);
++}
++
++static inline struct rq *task_rq_lock(struct task_struct *p, struct rq_flags *rf)
++ __acquires(p->pi_lock)
++ __acquires(rq->lock)
++{
++ struct rq *rq;
++
++ while (42) {
++ raw_spin_lock_irqsave(&p->pi_lock, rf->flags);
++ rq = task_rq(p);
++ raw_spin_lock(rq->lock);
++ if (likely(rq == task_rq(p)))
++ break;
++ raw_spin_unlock(rq->lock);
++ raw_spin_unlock_irqrestore(&p->pi_lock, rf->flags);
++ }
++ return rq;
++}
++
++static inline void task_rq_unlock(struct rq *rq, struct task_struct *p, struct rq_flags *rf)
++ __releases(rq->lock)
++ __releases(p->pi_lock)
++{
++ rq_unlock(rq);
++ raw_spin_unlock_irqrestore(&p->pi_lock, rf->flags);
++}
++
++static inline struct rq *__task_rq_lock(struct task_struct *p, struct rq_flags __always_unused *rf)
++ __acquires(rq->lock)
++{
++ struct rq *rq;
++
++ lockdep_assert_held(&p->pi_lock);
++
++ while (42) {
++ rq = task_rq(p);
++ raw_spin_lock(rq->lock);
++ if (likely(rq == task_rq(p)))
++ break;
++ raw_spin_unlock(rq->lock);
++ }
++ return rq;
++}
++
++static inline void __task_rq_unlock(struct rq *rq, struct rq_flags __always_unused *rf)
++{
++ rq_unlock(rq);
++}
++
++static inline struct rq *
++this_rq_lock_irq(struct rq_flags *rf)
++ __acquires(rq->lock)
++{
++ struct rq *rq;
++
++ local_irq_disable();
++ rq = this_rq();
++ rq_lock(rq);
++ return rq;
++}
++
++/*
++ * {de,en}queue flags: Most not used on MuQSS.
++ *
++ * DEQUEUE_SLEEP - task is no longer runnable
++ * ENQUEUE_WAKEUP - task just became runnable
++ *
++ * SAVE/RESTORE - an otherwise spurious dequeue/enqueue, done to ensure tasks
++ * are in a known state which allows modification. Such pairs
++ * should preserve as much state as possible.
++ *
++ * MOVE - paired with SAVE/RESTORE, explicitly does not preserve the location
++ * in the runqueue.
++ *
++ * ENQUEUE_HEAD - place at front of runqueue (tail if not specified)
++ * ENQUEUE_REPLENISH - CBS (replenish runtime and postpone deadline)
++ * ENQUEUE_MIGRATED - the task was migrated during wakeup
++ *
++ */
++
++#define DEQUEUE_SLEEP 0x01
++#define DEQUEUE_SAVE 0x02 /* matches ENQUEUE_RESTORE */
++
++#define ENQUEUE_WAKEUP 0x01
++#define ENQUEUE_RESTORE 0x02
++
++#ifdef CONFIG_SMP
++#define ENQUEUE_MIGRATED 0x40
++#else
++#define ENQUEUE_MIGRATED 0x00
++#endif
++
++static inline u64 __rq_clock_broken(struct rq *rq)
++{
++ return READ_ONCE(rq->clock);
++}
++
++static inline u64 rq_clock(struct rq *rq)
++{
++ lockdep_assert_held(rq->lock);
++
++ return rq->clock;
++}
++
++static inline u64 rq_clock_task(struct rq *rq)
++{
++ lockdep_assert_held(rq->lock);
++
++ return rq->clock_task;
++}
++
++#ifdef CONFIG_NUMA
++enum numa_topology_type {
++ NUMA_DIRECT,
++ NUMA_GLUELESS_MESH,
++ NUMA_BACKPLANE,
++};
++extern enum numa_topology_type sched_numa_topology_type;
++extern int sched_max_numa_distance;
++extern bool find_numa_distance(int distance);
++
++extern void sched_init_numa(void);
++extern void sched_domains_numa_masks_set(unsigned int cpu);
++extern void sched_domains_numa_masks_clear(unsigned int cpu);
++#else
++static inline void sched_init_numa(void) { }
++static inline void sched_domains_numa_masks_set(unsigned int cpu) { }
++static inline void sched_domains_numa_masks_clear(unsigned int cpu) { }
++#endif
++
++extern struct mutex sched_domains_mutex;
++extern struct static_key_false sched_schedstats;
++
++#define rcu_dereference_check_sched_domain(p) \
++ rcu_dereference_check((p), \
++ lockdep_is_held(&sched_domains_mutex))
++
++#ifdef CONFIG_SMP
++
++/*
++ * The domain tree (rq->sd) is protected by RCU's quiescent state transition.
++ * See destroy_sched_domains: call_rcu for details.
++ *
++ * The domain tree of any CPU may only be accessed from within
++ * preempt-disabled sections.
++ */
++#define for_each_domain(cpu, __sd) \
++ for (__sd = rcu_dereference_check_sched_domain(cpu_rq(cpu)->sd); \
++ __sd; __sd = __sd->parent)
++
++#define for_each_lower_domain(sd) for (; sd; sd = sd->child)
++
++/**
++ * highest_flag_domain - Return highest sched_domain containing flag.
++ * @cpu: The cpu whose highest level of sched domain is to
++ * be returned.
++ * @flag: The flag to check for the highest sched_domain
++ * for the given cpu.
++ *
++ * Returns the highest sched_domain of a cpu which contains the given flag.
++ */
++static inline struct sched_domain *highest_flag_domain(int cpu, int flag)
++{
++ struct sched_domain *sd, *hsd = NULL;
++
++ for_each_domain(cpu, sd) {
++ if (!(sd->flags & flag))
++ break;
++ hsd = sd;
++ }
++
++ return hsd;
++}
++
++static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
++{
++ struct sched_domain *sd;
++
++ for_each_domain(cpu, sd) {
++ if (sd->flags & flag)
++ break;
++ }
++
++ return sd;
++}
++
++DECLARE_PER_CPU(struct sched_domain *, sd_llc);
++DECLARE_PER_CPU(int, sd_llc_size);
++DECLARE_PER_CPU(int, sd_llc_id);
++DECLARE_PER_CPU(struct sched_domain_shared *, sd_llc_shared);
++DECLARE_PER_CPU(struct sched_domain *, sd_numa);
++DECLARE_PER_CPU(struct sched_domain *, sd_asym_packing);
++DECLARE_PER_CPU(struct sched_domain *, sd_asym_cpucapacity);
++
++struct sched_group_capacity {
++ atomic_t ref;
++ /*
++ * CPU capacity of this group, SCHED_CAPACITY_SCALE being max capacity
++ * for a single CPU.
++ */
++ unsigned long capacity;
++ unsigned long min_capacity; /* Min per-CPU capacity in group */
++ unsigned long max_capacity; /* Max per-CPU capacity in group */
++ unsigned long next_update;
++ int imbalance; /* XXX unrelated to capacity but shared group state */
++
++#ifdef CONFIG_SCHED_DEBUG
++ int id;
++#endif
++
++ unsigned long cpumask[0]; /* balance mask */
++};
++
++struct sched_group {
++ struct sched_group *next; /* Must be a circular list */
++ atomic_t ref;
++
++ unsigned int group_weight;
++ struct sched_group_capacity *sgc;
++ int asym_prefer_cpu; /* cpu of highest priority in group */
++
++ /*
++ * The CPUs this group covers.
++ *
++ * NOTE: this field is variable length. (Allocated dynamically
++ * by attaching extra space to the end of the structure,
++ * depending on how many CPUs the kernel has booted up with)
++ */
++ unsigned long cpumask[0];
++};
++
++static inline struct cpumask *sched_group_span(struct sched_group *sg)
++{
++ return to_cpumask(sg->cpumask);
++}
++
++/*
++ * See build_balance_mask().
++ */
++static inline struct cpumask *group_balance_mask(struct sched_group *sg)
++{
++ return to_cpumask(sg->sgc->cpumask);
++}
++
++/**
++ * group_first_cpu - Returns the first cpu in the cpumask of a sched_group.
++ * @group: The group whose first cpu is to be returned.
++ */
++static inline unsigned int group_first_cpu(struct sched_group *group)
++{
++ return cpumask_first(sched_group_span(group));
++}
++
++
++#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SYSCTL)
++void register_sched_domain_sysctl(void);
++void dirty_sched_domain_sysctl(int cpu);
++void unregister_sched_domain_sysctl(void);
++#else
++static inline void register_sched_domain_sysctl(void)
++{
++}
++static inline void dirty_sched_domain_sysctl(int cpu)
++{
++}
++static inline void unregister_sched_domain_sysctl(void)
++{
++}
++#endif
++
++extern void sched_ttwu_pending(void);
++extern void set_cpus_allowed_common(struct task_struct *p, const struct cpumask *new_mask);
++extern void set_rq_online (struct rq *rq);
++extern void set_rq_offline(struct rq *rq);
++extern bool sched_smp_initialized;
++
++static inline void update_group_capacity(struct sched_domain *sd, int cpu)
++{
++}
++
++static inline void trigger_load_balance(struct rq *rq)
++{
++}
++
++#define sched_feat(x) 0
++
++#else /* CONFIG_SMP */
++
++static inline void sched_ttwu_pending(void) { }
++
++#endif /* CONFIG_SMP */
++
++#ifdef CONFIG_CPU_IDLE
++static inline void idle_set_state(struct rq *rq,
++ struct cpuidle_state *idle_state)
++{
++ rq->idle_state = idle_state;
++}
++
++static inline struct cpuidle_state *idle_get_state(struct rq *rq)
++{
++ SCHED_WARN_ON(!rcu_read_lock_held());
++ return rq->idle_state;
++}
++#else
++static inline void idle_set_state(struct rq *rq,
++ struct cpuidle_state *idle_state)
++{
++}
++
++static inline struct cpuidle_state *idle_get_state(struct rq *rq)
++{
++ return NULL;
++}
++#endif
++
++#ifdef CONFIG_SCHED_DEBUG
++extern bool sched_debug_enabled;
++#endif
++
++extern void schedule_idle(void);
++
++#ifdef CONFIG_IRQ_TIME_ACCOUNTING
++struct irqtime {
++ u64 total;
++ u64 tick_delta;
++ u64 irq_start_time;
++ struct u64_stats_sync sync;
++};
++
++DECLARE_PER_CPU(struct irqtime, cpu_irqtime);
++
++/*
++ * Returns the irqtime minus the softirq time computed by ksoftirqd.
++ * Otherwise ksoftirqd's sum_exec_runtime is substracted its own runtime
++ * and never move forward.
++ */
++static inline u64 irq_time_read(int cpu)
++{
++ struct irqtime *irqtime = &per_cpu(cpu_irqtime, cpu);
++ unsigned int seq;
++ u64 total;
++
++ do {
++ seq = __u64_stats_fetch_begin(&irqtime->sync);
++ total = irqtime->total;
++ } while (__u64_stats_fetch_retry(&irqtime->sync, seq));
++
++ return total;
++}
++#endif /* CONFIG_IRQ_TIME_ACCOUNTING */
++
++#ifdef CONFIG_SMP
++static inline int cpu_of(struct rq *rq)
++{
++ return rq->cpu;
++}
++#else /* CONFIG_SMP */
++static inline int cpu_of(struct rq *rq)
++{
++ return 0;
++}
++#endif
++
++#ifdef CONFIG_CPU_FREQ
++DECLARE_PER_CPU(struct update_util_data *, cpufreq_update_util_data);
++
++static inline void cpufreq_trigger(struct rq *rq, unsigned int flags)
++{
++ struct update_util_data *data;
++
++ data = rcu_dereference_sched(*per_cpu_ptr(&cpufreq_update_util_data,
++ cpu_of(rq)));
++
++ if (data)
++ data->func(data, rq->niffies, flags);
++}
++#else
++static inline void cpufreq_trigger(struct rq *rq, unsigned int flag)
++{
++}
++#endif /* CONFIG_CPU_FREQ */
++
++#ifdef arch_scale_freq_capacity
++#ifndef arch_scale_freq_invariant
++#define arch_scale_freq_invariant() (true)
++#endif
++#else /* arch_scale_freq_capacity */
++#define arch_scale_freq_invariant() (false)
++#endif
++
++/*
++ * This should only be called when current == rq->idle. Dodgy workaround for
++ * when softirqs are pending and we are in the idle loop. Setting current to
++ * resched will kick us out of the idle loop and the softirqs will be serviced
++ * on our next pass through schedule().
++ */
++static inline bool softirq_pending(int cpu)
++{
++ if (likely(!local_softirq_pending()))
++ return false;
++ set_tsk_need_resched(current);
++ return true;
++}
++
++#ifdef CONFIG_64BIT
++static inline u64 read_sum_exec_runtime(struct task_struct *t)
++{
++ return tsk_seruntime(t);
++}
++#else
++static inline u64 read_sum_exec_runtime(struct task_struct *t)
++{
++ struct rq_flags rf;
++ u64 ns;
++ struct rq *rq;
++
++ rq = task_rq_lock(t, &rf);
++ ns = tsk_seruntime(t);
++ task_rq_unlock(rq, t, &rf);
++
++ return ns;
++}
++#endif
++
++#ifndef arch_scale_freq_capacity
++static __always_inline
++unsigned long arch_scale_freq_capacity(int cpu)
++{
++ return SCHED_CAPACITY_SCALE;
++}
++#endif
++
++#ifdef CONFIG_NO_HZ_FULL
++extern bool sched_can_stop_tick(struct rq *rq);
++extern int __init sched_tick_offload_init(void);
++
++/*
++ * Tick may be needed by tasks in the runqueue depending on their policy and
++ * requirements. If tick is needed, lets send the target an IPI to kick it out of
++ * nohz mode if necessary.
++ */
++static inline void sched_update_tick_dependency(struct rq *rq)
++{
++ int cpu;
++
++ if (!tick_nohz_full_enabled())
++ return;
++
++ cpu = cpu_of(rq);
++
++ if (!tick_nohz_full_cpu(cpu))
++ return;
++
++ if (sched_can_stop_tick(rq))
++ tick_nohz_dep_clear_cpu(cpu, TICK_DEP_BIT_SCHED);
++ else
++ tick_nohz_dep_set_cpu(cpu, TICK_DEP_BIT_SCHED);
++}
++#else
++static inline int sched_tick_offload_init(void) { return 0; }
++static inline void sched_update_tick_dependency(struct rq *rq) { }
++#endif
++
++#define SCHED_FLAG_SUGOV 0x10000000
++
++static inline bool rt_rq_is_runnable(struct rq *rt_rq)
++{
++ return rt_rq->rt_nr_running;
++}
++
++#ifdef CONFIG_CPU_FREQ_GOV_SCHEDUTIL
++/**
++ * enum schedutil_type - CPU utilization type
++ * @FREQUENCY_UTIL: Utilization used to select frequency
++ * @ENERGY_UTIL: Utilization used during energy calculation
++ *
++ * The utilization signals of all scheduling classes (CFS/RT/DL) and IRQ time
++ * need to be aggregated differently depending on the usage made of them. This
++ * enum is used within schedutil_freq_util() to differentiate the types of
++ * utilization expected by the callers, and adjust the aggregation accordingly.
++ */
++enum schedutil_type {
++ FREQUENCY_UTIL,
++ ENERGY_UTIL,
++};
++
++unsigned long schedutil_freq_util(int cpu, unsigned long util_cfs,
++ unsigned long max, enum schedutil_type type);
++
++static inline unsigned long schedutil_energy_util(int cpu, unsigned long cfs)
++{
++ unsigned long max = arch_scale_cpu_capacity(NULL, cpu);
++
++ return schedutil_freq_util(cpu, cfs, max, ENERGY_UTIL);
++}
++
++static inline unsigned long cpu_bw_dl(struct rq *rq)
++{
++ return 0;
++}
++
++static inline unsigned long cpu_util_dl(struct rq *rq)
++{
++ return 0;
++}
++
++static inline unsigned long cpu_util_cfs(struct rq *rq)
++{
++ unsigned long ret = READ_ONCE(rq->load_avg);
++
++ if (ret > SCHED_CAPACITY_SCALE)
++ ret = SCHED_CAPACITY_SCALE;
++ return ret;
++}
++
++static inline unsigned long cpu_util_rt(struct rq *rq)
++{
++ unsigned long ret = READ_ONCE(rq->rt_nr_running);
++
++ if (ret > SCHED_CAPACITY_SCALE)
++ ret = SCHED_CAPACITY_SCALE;
++ return ret;
++}
++
++#ifdef CONFIG_HAVE_SCHED_AVG_IRQ
++static inline unsigned long cpu_util_irq(struct rq *rq)
++{
++ unsigned long ret = READ_ONCE(rq->irq_load_avg);
++
++ if (ret > SCHED_CAPACITY_SCALE)
++ ret = SCHED_CAPACITY_SCALE;
++ return ret;
++}
++
++static inline
++unsigned long scale_irq_capacity(unsigned long util, unsigned long irq, unsigned long max)
++{
++ util *= (max - irq);
++ util /= max;
++
++ return util;
++
++}
++#else
++static inline unsigned long cpu_util_irq(struct rq *rq)
++{
++ return 0;
++}
++
++static inline
++unsigned long scale_irq_capacity(unsigned long util, unsigned long irq, unsigned long max)
++{
++ return util;
++}
++#endif
++#endif
++
++#if defined(CONFIG_ENERGY_MODEL) && defined(CONFIG_CPU_FREQ_GOV_SCHEDUTIL)
++#define perf_domain_span(pd) (to_cpumask(((pd)->em_pd->cpus)))
++
++DECLARE_STATIC_KEY_FALSE(sched_energy_present);
++
++static inline bool sched_energy_enabled(void)
++{
++ return static_branch_unlikely(&sched_energy_present);
++}
++
++#else /* ! (CONFIG_ENERGY_MODEL && CONFIG_CPU_FREQ_GOV_SCHEDUTIL) */
++
++#define perf_domain_span(pd) NULL
++static inline bool sched_energy_enabled(void) { return false; }
++
++#endif /* CONFIG_ENERGY_MODEL && CONFIG_CPU_FREQ_GOV_SCHEDUTIL */
++#endif /* MUQSS_SCHED_H */
+diff -Nur a/kernel/sched/sched.h b/kernel/sched/sched.h
+--- a/kernel/sched/sched.h 2019-06-25 04:34:56.000000000 +0100
++++ b/kernel/sched/sched.h 2019-07-07 09:17:41.261241813 +0100
+@@ -2,6 +2,19 @@
+ /*
+ * Scheduler internal types and methods:
+ */
++#ifdef CONFIG_SCHED_MUQSS
++#include "MuQSS.h"
++
++/* Begin compatibility wrappers for MuQSS/CFS differences */
++#define rq_rt_nr_running(rq) ((rq)->rt_nr_running)
++#define rq_h_nr_running(rq) ((rq)->nr_running)
++
++#else /* CONFIG_SCHED_MUQSS */
++
++#define rq_rt_nr_running(rq) ((rq)->rt.rt_nr_running)
++#define rq_h_nr_running(rq) ((rq)->cfs.h_nr_running)
++
++
+ #include <linux/sched.h>
+
+ #include <linux/sched/autogroup.h>
+@@ -2341,3 +2354,30 @@
+ static inline bool sched_energy_enabled(void) { return false; }
+
+ #endif /* CONFIG_ENERGY_MODEL && CONFIG_CPU_FREQ_GOV_SCHEDUTIL */
++
++/* MuQSS compatibility functions */
++static inline bool softirq_pending(int cpu)
++{
++ return false;
++}
++
++#ifdef CONFIG_64BIT
++static inline u64 read_sum_exec_runtime(struct task_struct *t)
++{
++ return t->se.sum_exec_runtime;
++}
++#else
++static inline u64 read_sum_exec_runtime(struct task_struct *t)
++{
++ u64 ns;
++ struct rq_flags rf;
++ struct rq *rq;
++
++ rq = task_rq_lock(t, &rf);
++ ns = t->se.sum_exec_runtime;
++ task_rq_unlock(rq, t, &rf);
++
++ return ns;
++}
++#endif
++#endif /* CONFIG_SCHED_MUQSS */
+diff -Nur a/kernel/sched/topology.c b/kernel/sched/topology.c
+--- a/kernel/sched/topology.c 2019-06-25 04:34:56.000000000 +0100
++++ b/kernel/sched/topology.c 2019-07-07 09:17:41.261241813 +0100
+@@ -442,7 +442,11 @@
+ struct root_domain *old_rd = NULL;
+ unsigned long flags;
+
++#ifdef CONFIG_SCHED_MUQSS
++ raw_spin_lock_irqsave(rq->lock, flags);
++#else
+ raw_spin_lock_irqsave(&rq->lock, flags);
++#endif
+
+ if (rq->rd) {
+ old_rd = rq->rd;
+@@ -468,7 +472,11 @@
+ if (cpumask_test_cpu(rq->cpu, cpu_active_mask))
+ set_rq_online(rq);
+
++#ifdef CONFIG_SCHED_MUQSS
++ raw_spin_unlock_irqrestore(rq->lock, flags);
++#else
+ raw_spin_unlock_irqrestore(&rq->lock, flags);
++#endif
+
+ if (old_rd)
+ call_rcu(&old_rd->rcu, free_rootdomain);
+diff -Nur a/kernel/skip_list.c b/kernel/skip_list.c
+--- a/kernel/skip_list.c 1970-01-01 01:00:00.000000000 +0100
++++ b/kernel/skip_list.c 2019-07-07 09:17:41.261241813 +0100
+@@ -0,0 +1,148 @@
++/*
++ Copyright (C) 2011,2016 Con Kolivas.
++
++ Code based on example originally by William Pugh.
++
++Skip Lists are a probabilistic alternative to balanced trees, as
++described in the June 1990 issue of CACM and were invented by
++William Pugh in 1987.
++
++A couple of comments about this implementation:
++The routine randomLevel has been hard-coded to generate random
++levels using p=0.25. It can be easily changed.
++
++The insertion routine has been implemented so as to use the
++dirty hack described in the CACM paper: if a random level is
++generated that is more than the current maximum level, the
++current maximum level plus one is used instead.
++
++Levels start at zero and go up to MaxLevel (which is equal to
++MaxNumberOfLevels-1).
++
++The routines defined in this file are:
++
++init: defines slnode
++
++new_skiplist: returns a new, empty list
++
++randomLevel: Returns a random level based on a u64 random seed passed to it.
++In MuQSS, the "niffy" time is used for this purpose.
++
++insert(l,key, value): inserts the binding (key, value) into l. This operation
++occurs in O(log n) time.
++
++delnode(slnode, l, node): deletes any binding of key from the l based on the
++actual node value. This operation occurs in O(k) time where k is the
++number of levels of the node in question (max 8). The original delete
++function occurred in O(log n) time and involved a search.
++
++MuQSS Notes: In this implementation of skiplists, there are bidirectional
++next/prev pointers and the insert function returns a pointer to the actual
++node the value is stored. The key here is chosen by the scheduler so as to
++sort tasks according to the priority list requirements and is no longer used
++by the scheduler after insertion. The scheduler lookup, however, occurs in
++O(1) time because it is always the first item in the level 0 linked list.
++Since the task struct stores a copy of the node pointer upon skiplist_insert,
++it can also remove it much faster than the original implementation with the
++aid of prev<->next pointer manipulation and no searching.
++
++*/
++
++#include <linux/slab.h>
++#include <linux/skip_list.h>
++
++#define MaxNumberOfLevels 8
++#define MaxLevel (MaxNumberOfLevels - 1)
++
++void skiplist_init(skiplist_node *slnode)
++{
++ int i;
++
++ slnode->key = 0xFFFFFFFFFFFFFFFF;
++ slnode->level = 0;
++ slnode->value = NULL;
++ for (i = 0; i < MaxNumberOfLevels; i++)
++ slnode->next[i] = slnode->prev[i] = slnode;
++}
++
++skiplist *new_skiplist(skiplist_node *slnode)
++{
++ skiplist *l = kzalloc(sizeof(skiplist), GFP_ATOMIC);
++
++ BUG_ON(!l);
++ l->header = slnode;
++ return l;
++}
++
++void free_skiplist(skiplist *l)
++{
++ skiplist_node *p, *q;
++
++ p = l->header;
++ do {
++ q = p->next[0];
++ p->next[0]->prev[0] = q->prev[0];
++ skiplist_node_init(p);
++ p = q;
++ } while (p != l->header);
++ kfree(l);
++}
++
++void skiplist_node_init(skiplist_node *node)
++{
++ memset(node, 0, sizeof(skiplist_node));
++}
++
++static inline unsigned int randomLevel(const long unsigned int randseed)
++{
++ return find_first_bit(&randseed, MaxLevel) / 2;
++}
++
++void skiplist_insert(skiplist *l, skiplist_node *node, keyType key, valueType value, unsigned int randseed)
++{
++ skiplist_node *update[MaxNumberOfLevels];
++ skiplist_node *p, *q;
++ int k = l->level;
++
++ p = l->header;
++ do {
++ while (q = p->next[k], q->key <= key)
++ p = q;
++ update[k] = p;
++ } while (--k >= 0);
++
++ ++l->entries;
++ k = randomLevel(randseed);
++ if (k > l->level) {
++ k = ++l->level;
++ update[k] = l->header;
++ }
++
++ node->level = k;
++ node->key = key;
++ node->value = value;
++ do {
++ p = update[k];
++ node->next[k] = p->next[k];
++ p->next[k] = node;
++ node->prev[k] = p;
++ node->next[k]->prev[k] = node;
++ } while (--k >= 0);
++}
++
++void skiplist_delete(skiplist *l, skiplist_node *node)
++{
++ int k, m = node->level;
++
++ for (k = 0; k <= m; k++) {
++ node->prev[k]->next[k] = node->next[k];
++ node->next[k]->prev[k] = node->prev[k];
++ }
++ skiplist_node_init(node);
++ if (m == l->level) {
++ while (l->header->next[m] == l->header && l->header->prev[m] == l->header && m > 0)
++ m--;
++ l->level = m;
++ }
++ l->entries--;
++}
+diff -Nur a/kernel/sysctl.c b/kernel/sysctl.c
+--- a/kernel/sysctl.c 2019-07-07 09:08:19.152348621 +0100
++++ b/kernel/sysctl.c 2019-07-07 09:23:47.863548280 +0100
+@@ -141,6 +141,12 @@
+ static unsigned long long_max __read_only = LONG_MAX;
+ static int one_hundred __read_only = 100;
+ static int one_thousand __read_only = 1000;
++#ifdef CONFIG_SCHED_MUQSS
++extern int rr_interval;
++extern int sched_interactive;
++extern int sched_iso_cpu;
++extern int sched_yield_type;
++#endif
+ #ifdef CONFIG_PRINTK
+ static int ten_thousand __read_only = 10000;
+ #endif
+@@ -316,7 +322,7 @@
+ { }
+ };
+
+-#ifdef CONFIG_SCHED_DEBUG
++#if defined(CONFIG_SCHED_DEBUG) && !defined(CONFIG_SCHED_MUQSS)
+ static int min_sched_granularity_ns __read_only = 100000; /* 100 usecs */
+ static int max_sched_granularity_ns __read_only = NSEC_PER_SEC; /* 1 second */
+ static int min_wakeup_granularity_ns __read_only; /* 0 usecs */
+@@ -333,6 +339,7 @@
+ #endif
+
+ static struct ctl_table kern_table[] = {
++#ifndef CONFIG_SCHED_MUQSS
+ {
+ .procname = "sched_child_runs_first",
+ .data = &sysctl_sched_child_runs_first,
+@@ -498,6 +505,7 @@
+ .extra2 = &one,
+ },
+ #endif
++#endif /* !CONFIG_SCHED_MUQSS */
+ #ifdef CONFIG_PROVE_LOCKING
+ {
+ .procname = "prove_locking",
+@@ -1110,6 +1118,44 @@
+ .proc_handler = proc_dointvec,
+ },
+ #endif
++#ifdef CONFIG_SCHED_MUQSS
++ {
++ .procname = "rr_interval",
++ .data = &rr_interval,
++ .maxlen = sizeof (int),
++ .mode = 0644,
++ .proc_handler = &proc_dointvec_minmax,
++ .extra1 = &one,
++ .extra2 = &one_thousand,
++ },
++ {
++ .procname = "interactive",
++ .data = &sched_interactive,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = &proc_dointvec_minmax,
++ .extra1 = &zero,
++ .extra2 = &one,
++ },
++ {
++ .procname = "iso_cpu",
++ .data = &sched_iso_cpu,
++ .maxlen = sizeof (int),
++ .mode = 0644,
++ .proc_handler = &proc_dointvec_minmax,
++ .extra1 = &zero,
++ .extra2 = &one_hundred,
++ },
++ {
++ .procname = "yield_type",
++ .data = &sched_yield_type,
++ .maxlen = sizeof (int),
++ .mode = 0644,
++ .proc_handler = &proc_dointvec_minmax,
++ .extra1 = &zero,
++ .extra2 = &two,
++ },
++#endif
+ #if defined(CONFIG_S390) && defined(CONFIG_SMP)
+ {
+ .procname = "spin_retry",
+diff -Nur a/kernel/time/clockevents.c b/kernel/time/clockevents.c
+--- a/kernel/time/clockevents.c 2019-06-25 04:34:56.000000000 +0100
++++ b/kernel/time/clockevents.c 2019-07-07 09:17:41.261241813 +0100
+@@ -190,8 +190,13 @@
+
+ #ifdef CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST
+
++#ifdef CONFIG_SCHED_MUQSS
++/* Limit min_delta to 100us */
++#define MIN_DELTA_LIMIT (NSEC_PER_SEC / 10000)
++#else
+ /* Limit min_delta to a jiffie */
+ #define MIN_DELTA_LIMIT (NSEC_PER_SEC / HZ)
++#endif
+
+ /**
+ * clockevents_increase_min_delta - raise minimum delta of a clock event device
+diff -Nur a/kernel/time/posix-cpu-timers.c b/kernel/time/posix-cpu-timers.c
+--- a/kernel/time/posix-cpu-timers.c 2019-06-25 04:34:56.000000000 +0100
++++ b/kernel/time/posix-cpu-timers.c 2019-07-07 09:17:41.261241813 +0100
+@@ -829,7 +829,7 @@
+ tsk_expires->virt_exp = expires;
+
+ tsk_expires->sched_exp = check_timers_list(++timers, firing,
+- tsk->se.sum_exec_runtime);
++ tsk_seruntime(tsk));
+
+ /*
+ * Check for the special case thread timers.
+@@ -839,7 +839,7 @@
+ unsigned long hard = task_rlimit_max(tsk, RLIMIT_RTTIME);
+
+ if (hard != RLIM_INFINITY &&
+- tsk->rt.timeout > DIV_ROUND_UP(hard, USEC_PER_SEC/HZ)) {
++ tsk_rttimeout(tsk) > DIV_ROUND_UP(hard, USEC_PER_SEC/HZ)) {
+ /*
+ * At the hard limit, we just die.
+ * No need to calculate anything else now.
+@@ -851,7 +851,7 @@
+ __group_send_sig_info(SIGKILL, SEND_SIG_PRIV, tsk);
+ return;
+ }
+- if (tsk->rt.timeout > DIV_ROUND_UP(soft, USEC_PER_SEC/HZ)) {
++ if (tsk_rttimeout(tsk) > DIV_ROUND_UP(soft, USEC_PER_SEC/HZ)) {
+ /*
+ * At the soft limit, send a SIGXCPU every second.
+ */
+@@ -1091,7 +1091,7 @@
+ struct task_cputime task_sample;
+
+ task_cputime(tsk, &task_sample.utime, &task_sample.stime);
+- task_sample.sum_exec_runtime = tsk->se.sum_exec_runtime;
++ task_sample.sum_exec_runtime = tsk_seruntime(tsk);
+ if (task_cputime_expired(&task_sample, &tsk->cputime_expires))
+ return 1;
+ }
+diff -Nur a/kernel/time/timer.c b/kernel/time/timer.c
+--- a/kernel/time/timer.c 2019-07-07 09:08:19.152348621 +0100
++++ b/kernel/time/timer.c 2019-07-07 09:17:41.271242152 +0100
+@@ -1478,7 +1478,7 @@
+ * Check, if the next hrtimer event is before the next timer wheel
+ * event:
+ */
+-static u64 cmp_next_hrtimer_event(u64 basem, u64 expires)
++static u64 cmp_next_hrtimer_event(struct timer_base *base, u64 basem, u64 expires)
+ {
+ u64 nextevt = hrtimer_get_next_event();
+
+@@ -1496,6 +1496,9 @@
+ if (nextevt <= basem)
+ return basem;
+
++ if (nextevt < expires && nextevt - basem <= TICK_NSEC)
++ base->is_idle = false;
++
+ /*
+ * Round up to the next jiffie. High resolution timers are
+ * off, so the hrtimers are expired in the tick and we need to
+@@ -1565,7 +1568,7 @@
+ }
+ raw_spin_unlock(&base->lock);
+
+- return cmp_next_hrtimer_event(basem, expires);
++ return cmp_next_hrtimer_event(base, basem, expires);
+ }
+
+ /**
+diff -Nur a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c
+--- a/kernel/trace/trace_selftest.c 2019-06-25 04:34:56.000000000 +0100
++++ b/kernel/trace/trace_selftest.c 2019-07-07 09:17:41.271242152 +0100
+@@ -1045,10 +1045,15 @@
+ {
+ /* Make this a -deadline thread */
+ static const struct sched_attr attr = {
++#ifdef CONFIG_SCHED_MUQSS
++ /* No deadline on MuQSS, use RR */
++ .sched_policy = SCHED_RR,
++#else
+ .sched_policy = SCHED_DEADLINE,
+ .sched_runtime = 100000ULL,
+ .sched_deadline = 10000000ULL,
+ .sched_period = 10000000ULL
++#endif
+ };
+ struct wakeup_test_data *x = data;
+
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-0002-Fix-Werror-build-failure-in-tools.patch b/sys-kernel/linux-sources-redcore/files/5.1-0002-Fix-Werror-build-failure-in-tools.patch
new file mode 100644
index 00000000..c8c39888
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-0002-Fix-Werror-build-failure-in-tools.patch
@@ -0,0 +1,25 @@
+From 89b8d55e743d382f463526832cf8b8a4f8cf32ff Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Sun, 18 Feb 2018 12:36:22 +1100
+Subject: [PATCH 02/16] Fix Werror build failure in tools.
+
+---
+ tools/objtool/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/tools/objtool/Makefile b/tools/objtool/Makefile
+index 53f8be0f4a1f..ad2c11a881db 100644
+--- a/tools/objtool/Makefile
++++ b/tools/objtool/Makefile
+@@ -34,7 +34,7 @@ INCLUDES := -I$(srctree)/tools/include \
+ -I$(srctree)/tools/arch/$(HOSTARCH)/include/uapi \
+ -I$(srctree)/tools/objtool/arch/$(ARCH)/include
+ WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed
+-CFLAGS += -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
++CFLAGS += $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
+ LDFLAGS += $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
+
+ # Allow old libelf to be used:
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-0003-Make-preemptible-kernel-default.patch b/sys-kernel/linux-sources-redcore/files/5.1-0003-Make-preemptible-kernel-default.patch
new file mode 100644
index 00000000..ec621e09
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-0003-Make-preemptible-kernel-default.patch
@@ -0,0 +1,4653 @@
+From 4caf76327e0d7e1c25b40dbbf7294cc80a2d167c Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Sat, 29 Oct 2016 11:20:37 +1100
+Subject: [PATCH 03/16] Make preemptible kernel default.
+
+Make full preempt default on all arches.
+---
+ arch/arc/configs/tb10x_defconfig | 2 +-
+ arch/arm/configs/bcm2835_defconfig | 2 +-
+ arch/arm/configs/imx_v6_v7_defconfig | 1 +
+ arch/arm/configs/mps2_defconfig | 2 +-
+ arch/arm/configs/mxs_defconfig | 7 +-
+ arch/blackfin/configs/BF518F-EZBRD_defconfig | 121 ++++
+ arch/blackfin/configs/BF526-EZBRD_defconfig | 158 ++++++
+ .../blackfin/configs/BF527-EZKIT-V2_defconfig | 188 +++++++
+ arch/blackfin/configs/BF527-EZKIT_defconfig | 181 ++++++
+ .../blackfin/configs/BF527-TLL6527M_defconfig | 178 ++++++
+ arch/blackfin/configs/BF533-EZKIT_defconfig | 114 ++++
+ arch/blackfin/configs/BF533-STAMP_defconfig | 124 +++++
+ arch/blackfin/configs/BF537-STAMP_defconfig | 136 +++++
+ arch/blackfin/configs/BF538-EZKIT_defconfig | 133 +++++
+ arch/blackfin/configs/BF548-EZKIT_defconfig | 207 +++++++
+ arch/blackfin/configs/BF561-ACVILON_defconfig | 149 +++++
+ .../configs/BF561-EZKIT-SMP_defconfig | 112 ++++
+ arch/blackfin/configs/BF561-EZKIT_defconfig | 114 ++++
+ arch/blackfin/configs/BF609-EZKIT_defconfig | 154 +++++
+ arch/blackfin/configs/BlackStamp_defconfig | 108 ++++
+ arch/blackfin/configs/CM-BF527_defconfig | 129 +++++
+ arch/blackfin/configs/PNAV-10_defconfig | 111 ++++
+ arch/blackfin/configs/SRV1_defconfig | 88 +++
+ arch/blackfin/configs/TCM-BF518_defconfig | 131 +++++
+ arch/mips/configs/fuloong2e_defconfig | 2 +-
+ arch/mips/configs/gpr_defconfig | 2 +-
+ arch/mips/configs/ip22_defconfig | 2 +-
+ arch/mips/configs/ip28_defconfig | 2 +-
+ arch/mips/configs/jazz_defconfig | 2 +-
+ arch/mips/configs/mtx1_defconfig | 2 +-
+ arch/mips/configs/nlm_xlr_defconfig | 2 +-
+ arch/mips/configs/pic32mzda_defconfig | 2 +-
+ arch/mips/configs/pistachio_defconfig | 2 +-
+ arch/mips/configs/pnx8335_stb225_defconfig | 2 +-
+ arch/mips/configs/rm200_defconfig | 2 +-
+ arch/parisc/configs/712_defconfig | 2 +-
+ arch/parisc/configs/c3000_defconfig | 2 +-
+ arch/parisc/configs/default_defconfig | 2 +-
+ arch/powerpc/configs/c2k_defconfig | 389 +++++++++++++
+ arch/powerpc/configs/ppc6xx_defconfig | 2 +-
+ arch/score/configs/spct6600_defconfig | 84 +++
+ arch/sh/configs/se7712_defconfig | 2 +-
+ arch/sh/configs/se7721_defconfig | 2 +-
+ arch/sh/configs/titan_defconfig | 2 +-
+ arch/sparc/configs/sparc64_defconfig | 2 +-
+ arch/tile/configs/tilegx_defconfig | 411 ++++++++++++++
+ arch/tile/configs/tilepro_defconfig | 524 ++++++++++++++++++
+ arch/x86/configs/i386_defconfig | 2 +-
+ arch/x86/configs/x86_64_defconfig | 2 +-
+ kernel/Kconfig.preempt | 7 +-
+ 50 files changed, 4079 insertions(+), 28 deletions(-)
+ create mode 100644 arch/blackfin/configs/BF518F-EZBRD_defconfig
+ create mode 100644 arch/blackfin/configs/BF526-EZBRD_defconfig
+ create mode 100644 arch/blackfin/configs/BF527-EZKIT-V2_defconfig
+ create mode 100644 arch/blackfin/configs/BF527-EZKIT_defconfig
+ create mode 100644 arch/blackfin/configs/BF527-TLL6527M_defconfig
+ create mode 100644 arch/blackfin/configs/BF533-EZKIT_defconfig
+ create mode 100644 arch/blackfin/configs/BF533-STAMP_defconfig
+ create mode 100644 arch/blackfin/configs/BF537-STAMP_defconfig
+ create mode 100644 arch/blackfin/configs/BF538-EZKIT_defconfig
+ create mode 100644 arch/blackfin/configs/BF548-EZKIT_defconfig
+ create mode 100644 arch/blackfin/configs/BF561-ACVILON_defconfig
+ create mode 100644 arch/blackfin/configs/BF561-EZKIT-SMP_defconfig
+ create mode 100644 arch/blackfin/configs/BF561-EZKIT_defconfig
+ create mode 100644 arch/blackfin/configs/BF609-EZKIT_defconfig
+ create mode 100644 arch/blackfin/configs/BlackStamp_defconfig
+ create mode 100644 arch/blackfin/configs/CM-BF527_defconfig
+ create mode 100644 arch/blackfin/configs/PNAV-10_defconfig
+ create mode 100644 arch/blackfin/configs/SRV1_defconfig
+ create mode 100644 arch/blackfin/configs/TCM-BF518_defconfig
+ create mode 100644 arch/powerpc/configs/c2k_defconfig
+ create mode 100644 arch/score/configs/spct6600_defconfig
+ create mode 100644 arch/tile/configs/tilegx_defconfig
+ create mode 100644 arch/tile/configs/tilepro_defconfig
+
+diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig
+index 5b5119d2b5d5..7425d2ec3a82 100644
+--- a/arch/arc/configs/tb10x_defconfig
++++ b/arch/arc/configs/tb10x_defconfig
+@@ -29,7 +29,7 @@ CONFIG_ARC_PLAT_TB10X=y
+ CONFIG_ARC_CACHE_LINE_SHIFT=5
+ CONFIG_HZ=250
+ CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ # CONFIG_COMPACTION is not set
+ CONFIG_NET=y
+ CONFIG_PACKET=y
+diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
+index dcf7610cfe55..d15cd13aa944 100644
+--- a/arch/arm/configs/bcm2835_defconfig
++++ b/arch/arm/configs/bcm2835_defconfig
+@@ -29,7 +29,7 @@ CONFIG_MODULE_UNLOAD=y
+ CONFIG_ARCH_MULTI_V6=y
+ CONFIG_ARCH_BCM=y
+ CONFIG_ARCH_BCM2835=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_AEABI=y
+ CONFIG_KSM=y
+ CONFIG_CLEANCACHE=y
+diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
+index 50fb01d70b10..5f2960f1853f 100644
+--- a/arch/arm/configs/imx_v6_v7_defconfig
++++ b/arch/arm/configs/imx_v6_v7_defconfig
+@@ -45,6 +45,7 @@ CONFIG_PCI_MSI=y
+ CONFIG_PCI_IMX6=y
+ CONFIG_SMP=y
+ CONFIG_ARM_PSCI=y
++CONFIG_PREEMPT=y
+ CONFIG_HIGHMEM=y
+ CONFIG_FORCE_MAX_ZONEORDER=14
+ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
+diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig
+index 1d923dbb9928..9c1931f1fafd 100644
+--- a/arch/arm/configs/mps2_defconfig
++++ b/arch/arm/configs/mps2_defconfig
+@@ -18,7 +18,7 @@ CONFIG_ARCH_MPS2=y
+ CONFIG_SET_MEM_PARAM=y
+ CONFIG_DRAM_BASE=0x21000000
+ CONFIG_DRAM_SIZE=0x1000000
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ # CONFIG_ATAGS is not set
+ CONFIG_ZBOOT_ROM_TEXT=0x0
+ CONFIG_ZBOOT_ROM_BSS=0x0
+diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
+index 38480596c449..d509ff66f73a 100644
+--- a/arch/arm/configs/mxs_defconfig
++++ b/arch/arm/configs/mxs_defconfig
+@@ -1,7 +1,7 @@
+ CONFIG_SYSVIPC=y
+ CONFIG_NO_HZ=y
+ CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT_VOLUNTARY=n
+ CONFIG_TASKSTATS=y
+ CONFIG_TASK_DELAY_ACCT=y
+ CONFIG_TASK_XACCT=y
+@@ -27,6 +27,11 @@ CONFIG_MODVERSIONS=y
+ CONFIG_BLK_DEV_INTEGRITY=y
+ # CONFIG_IOSCHED_DEADLINE is not set
+ # CONFIG_IOSCHED_CFQ is not set
++# CONFIG_ARCH_MULTI_V7 is not set
++CONFIG_ARCH_MXS=y
++# CONFIG_ARM_THUMB is not set
++CONFIG_PREEMPT=y
++CONFIG_AEABI=y
+ CONFIG_NET=y
+ CONFIG_PACKET=y
+ CONFIG_UNIX=y
+diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
+new file mode 100644
+index 000000000000..39b91dfa55b5
+--- /dev/null
++++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
+@@ -0,0 +1,121 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF518=y
++CONFIG_IRQ_TIMER0=12
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_JEDECPROBE=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++CONFIG_NET_BFIN=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++# CONFIG_NET_VENDOR_SMSC is not set
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++# CONFIG_USB_SUPPORT is not set
++CONFIG_MMC=y
++CONFIG_SDH_BFIN=y
++CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=m
++# CONFIG_DNOTIFY is not set
++CONFIG_VFAT_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_NLS_CODEPAGE_437=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_UTF8=m
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRC_CCITT=m
+diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
+new file mode 100644
+index 000000000000..675cadb3a0c4
+--- /dev/null
++++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
+@@ -0,0 +1,158 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF526=y
++CONFIG_IRQ_TIMER0=12
++CONFIG_BFIN526_EZBRD=y
++CONFIG_IRQ_USB_INT0=11
++CONFIG_IRQ_USB_INT1=11
++CONFIG_IRQ_USB_INT2=11
++CONFIG_IRQ_USB_DMA=11
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_M25P80=y
++CONFIG_MTD_NAND=m
++CONFIG_MTD_SPI_NOR=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=y
++CONFIG_BLK_DEV_SR=m
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++CONFIG_NET_BFIN=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++# CONFIG_NET_VENDOR_SMSC is not set
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++CONFIG_INPUT_FF_MEMLESS=m
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART1=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_HID_A4TECH=y
++CONFIG_HID_APPLE=y
++CONFIG_HID_BELKIN=y
++CONFIG_HID_CHERRY=y
++CONFIG_HID_CHICONY=y
++CONFIG_HID_CYPRESS=y
++CONFIG_HID_EZKEY=y
++CONFIG_HID_GYRATION=y
++CONFIG_HID_LOGITECH=y
++CONFIG_HID_MICROSOFT=y
++CONFIG_HID_MONTEREY=y
++CONFIG_HID_PANTHERLORD=y
++CONFIG_HID_PETALYNX=y
++CONFIG_HID_SAMSUNG=y
++CONFIG_HID_SONY=y
++CONFIG_HID_SUNPLUS=y
++CONFIG_USB=y
++# CONFIG_USB_DEVICE_CLASS is not set
++CONFIG_USB_OTG_BLACKLIST_HUB=y
++CONFIG_USB_MON=y
++CONFIG_USB_STORAGE=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=m
++# CONFIG_DNOTIFY is not set
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_VFAT_FS=m
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_NLS_CODEPAGE_437=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_UTF8=m
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRC_CCITT=m
+diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
+new file mode 100644
+index 000000000000..4c517c443af5
+--- /dev/null
++++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
+@@ -0,0 +1,188 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF527=y
++CONFIG_BF_REV_0_2=y
++CONFIG_BFIN527_EZKIT_V2=y
++CONFIG_IRQ_USB_INT0=11
++CONFIG_IRQ_USB_INT1=11
++CONFIG_IRQ_USB_INT2=11
++CONFIG_IRQ_USB_DMA=11
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRTTY_SIR=m
++CONFIG_BFIN_SIR=m
++CONFIG_BFIN_SIR0=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_JEDECPROBE=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_M25P80=y
++CONFIG_MTD_NAND=m
++CONFIG_MTD_SPI_NOR=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=y
++CONFIG_BLK_DEV_SR=m
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++CONFIG_NET_BFIN=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++# CONFIG_NET_VENDOR_SMSC is not set
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++CONFIG_INPUT_FF_MEMLESS=m
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=y
++CONFIG_KEYBOARD_ADP5520=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_AD7879=y
++CONFIG_TOUCHSCREEN_AD7879_I2C=y
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART1=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_PMIC_ADP5520=y
++CONFIG_FB=y
++CONFIG_FB_BFIN_LQ035Q1=y
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++# CONFIG_LOGO_LINUX_CLUT224 is not set
++# CONFIG_LOGO_BLACKFIN_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=y
++CONFIG_SND_SOC=y
++CONFIG_SND_BF5XX_I2S=y
++CONFIG_SND_BF5XX_SOC_SSM2602=y
++CONFIG_HID_A4TECH=y
++CONFIG_HID_APPLE=y
++CONFIG_HID_BELKIN=y
++CONFIG_HID_CHERRY=y
++CONFIG_HID_CHICONY=y
++CONFIG_HID_CYPRESS=y
++CONFIG_HID_EZKEY=y
++CONFIG_HID_GYRATION=y
++CONFIG_HID_LOGITECH=y
++CONFIG_HID_MICROSOFT=y
++CONFIG_HID_MONTEREY=y
++CONFIG_HID_PANTHERLORD=y
++CONFIG_HID_PETALYNX=y
++CONFIG_HID_SAMSUNG=y
++CONFIG_HID_SONY=y
++CONFIG_HID_SUNPLUS=y
++CONFIG_USB=y
++# CONFIG_USB_DEVICE_CLASS is not set
++CONFIG_USB_OTG_BLACKLIST_HUB=y
++CONFIG_USB_MON=y
++CONFIG_USB_MUSB_HDRC=y
++CONFIG_USB_MUSB_BLACKFIN=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_GADGET=y
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++CONFIG_LEDS_ADP5520=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=m
++# CONFIG_DNOTIFY is not set
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_UDF_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_NLS_CODEPAGE_437=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_UTF8=m
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
+new file mode 100644
+index 000000000000..bf8df3e6cf02
+--- /dev/null
++++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
+@@ -0,0 +1,181 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF527=y
++CONFIG_BF_REV_0_1=y
++CONFIG_IRQ_USB_INT0=11
++CONFIG_IRQ_USB_INT1=11
++CONFIG_IRQ_USB_INT2=11
++CONFIG_IRQ_USB_DMA=11
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRTTY_SIR=m
++CONFIG_BFIN_SIR=m
++CONFIG_BFIN_SIR0=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_JEDECPROBE=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_M25P80=y
++CONFIG_MTD_NAND=m
++CONFIG_MTD_SPI_NOR=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=y
++CONFIG_BLK_DEV_SR=m
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++CONFIG_NET_BFIN=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++# CONFIG_NET_VENDOR_SMSC is not set
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++CONFIG_INPUT_FF_MEMLESS=m
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART1=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_FB=y
++CONFIG_FB_BFIN_T350MCQB=y
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_LTV350QV=m
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++# CONFIG_LOGO_LINUX_CLUT224 is not set
++# CONFIG_LOGO_BLACKFIN_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=y
++CONFIG_SND_SOC=y
++CONFIG_SND_BF5XX_I2S=y
++CONFIG_SND_BF5XX_SOC_SSM2602=y
++CONFIG_HID_A4TECH=y
++CONFIG_HID_APPLE=y
++CONFIG_HID_BELKIN=y
++CONFIG_HID_CHERRY=y
++CONFIG_HID_CHICONY=y
++CONFIG_HID_CYPRESS=y
++CONFIG_HID_EZKEY=y
++CONFIG_HID_GYRATION=y
++CONFIG_HID_LOGITECH=y
++CONFIG_HID_MICROSOFT=y
++CONFIG_HID_MONTEREY=y
++CONFIG_HID_PANTHERLORD=y
++CONFIG_HID_PETALYNX=y
++CONFIG_HID_SAMSUNG=y
++CONFIG_HID_SONY=y
++CONFIG_HID_SUNPLUS=y
++CONFIG_USB=y
++# CONFIG_USB_DEVICE_CLASS is not set
++CONFIG_USB_OTG_BLACKLIST_HUB=y
++CONFIG_USB_MON=y
++CONFIG_USB_MUSB_HDRC=y
++CONFIG_MUSB_PIO_ONLY=y
++CONFIG_USB_MUSB_BLACKFIN=y
++CONFIG_MUSB_PIO_ONLY=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_GADGET=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=m
++# CONFIG_DNOTIFY is not set
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_UDF_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_NLS_CODEPAGE_437=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_UTF8=m
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF527-TLL6527M_defconfig b/arch/blackfin/configs/BF527-TLL6527M_defconfig
+new file mode 100644
+index 000000000000..0220b3b15c53
+--- /dev/null
++++ b/arch/blackfin/configs/BF527-TLL6527M_defconfig
+@@ -0,0 +1,178 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_LOCALVERSION="DEV_0-1_pre2010"
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_PREEMPT=y
++CONFIG_BF527=y
++CONFIG_BF_REV_0_2=y
++CONFIG_BFIN527_TLL6527M=y
++CONFIG_BF527_UART1_PORTG=y
++CONFIG_IRQ_USB_INT0=11
++CONFIG_IRQ_USB_INT1=11
++CONFIG_IRQ_USB_INT2=11
++CONFIG_IRQ_USB_DMA=11
++CONFIG_BOOT_LOAD=0x400000
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=y
++CONFIG_DMA_UNCACHED_2M=y
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_0=0xFFC2
++CONFIG_BANK_1=0xFFC2
++CONFIG_BANK_2=0xFFC2
++CONFIG_BANK_3=0xFFC2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRTTY_SIR=m
++CONFIG_BFIN_SIR=m
++CONFIG_BFIN_SIR0=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_GPIO_ADDR=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=y
++CONFIG_BLK_DEV_SR=m
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++CONFIG_NET_ETHERNET=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_AD7879=m
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_AD714X=y
++CONFIG_INPUT_ADXL34X=y
++# CONFIG_SERIO is not set
++CONFIG_BFIN_PPI=m
++CONFIG_BFIN_SIMPLE_TIMER=m
++CONFIG_BFIN_SPORT=m
++# CONFIG_CONSOLE_TRANSLATIONS is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_BFIN_JTAG_COMM=m
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART1=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C_CHARDEV=y
++# CONFIG_I2C_HELPER_AUTO is not set
++CONFIG_I2C_SMBUS=y
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_MEDIA_SUPPORT=y
++CONFIG_VIDEO_DEV=y
++# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
++CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
++CONFIG_VIDEO_BLACKFIN_CAM=m
++CONFIG_OV9655=y
++CONFIG_FB=y
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_FONTS=y
++CONFIG_FONT_6x11=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++# CONFIG_LOGO_LINUX_CLUT224 is not set
++# CONFIG_LOGO_BLACKFIN_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=y
++CONFIG_SND_MIXER_OSS=y
++CONFIG_SND_PCM_OSS=y
++CONFIG_SND_SOC=y
++CONFIG_SND_BF5XX_I2S=y
++CONFIG_SND_BF5XX_SOC_SSM2602=y
++# CONFIG_HID_SUPPORT is not set
++# CONFIG_USB_SUPPORT is not set
++CONFIG_MMC=m
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=y
++# CONFIG_DNOTIFY is not set
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_UDF_FS=m
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_JFFS2_FS=y
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++CONFIG_NLS_CODEPAGE_437=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_UTF8=m
++CONFIG_DEBUG_KERNEL=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRC7=m
+diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
+new file mode 100644
+index 000000000000..6023e3fd2c48
+--- /dev/null
++++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
+@@ -0,0 +1,114 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BFIN533_EZKIT=y
++CONFIG_TIMER0=11
++CONFIG_CLKIN_HZ=27000000
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0xAAC2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRTTY_SIR=m
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_CFI_AMDSTD=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PLATRAM=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++CONFIG_SMC91X=y
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++CONFIG_INPUT=m
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++# CONFIG_USB_SUPPORT is not set
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++# CONFIG_DNOTIFY is not set
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
+new file mode 100644
+index 000000000000..f5cd0f18b711
+--- /dev/null
++++ b/arch/blackfin/configs/BF533-STAMP_defconfig
+@@ -0,0 +1,124 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_TIMER0=11
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0xAAC2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRTTY_SIR=m
++CONFIG_BFIN_SIR=m
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=m
++CONFIG_MTD_CFI_AMDSTD=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++CONFIG_SMC91X=y
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=m
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_GPIO=m
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_FB=m
++CONFIG_FIRMWARE_EDID=y
++CONFIG_SOUND=m
++CONFIG_SND=m
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_SOC=m
++CONFIG_SND_BF5XX_I2S=m
++CONFIG_SND_BF5XX_SOC_AD73311=m
++# CONFIG_USB_SUPPORT is not set
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++# CONFIG_DNOTIFY is not set
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
+new file mode 100644
+index 000000000000..48085fde7f9e
+--- /dev/null
++++ b/arch/blackfin/configs/BF537-STAMP_defconfig
+@@ -0,0 +1,136 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF537=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_CAN=m
++CONFIG_CAN_RAW=m
++CONFIG_CAN_BCM=m
++CONFIG_CAN_BFIN=m
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRTTY_SIR=m
++CONFIG_BFIN_SIR=m
++CONFIG_BFIN_SIR1=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=m
++CONFIG_MTD_CFI_AMDSTD=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_PHYSMAP=m
++CONFIG_MTD_M25P80=y
++CONFIG_MTD_SPI_NOR=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++CONFIG_NET_BFIN=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++# CONFIG_NET_VENDOR_SMSC is not set
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=m
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_BLACKFIN_TWI=m
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_FB=m
++CONFIG_FIRMWARE_EDID=y
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_SOUND=m
++CONFIG_SND=m
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_SOC=m
++CONFIG_SND_BF5XX_I2S=m
++CONFIG_SND_BF5XX_SOC_AD73311=m
++# CONFIG_USB_SUPPORT is not set
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++# CONFIG_DNOTIFY is not set
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
+new file mode 100644
+index 000000000000..12deeaaef3cb
+--- /dev/null
++++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
+@@ -0,0 +1,133 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF538=y
++CONFIG_IRQ_TIMER0=12
++CONFIG_IRQ_TIMER1=12
++CONFIG_IRQ_TIMER2=12
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_PM=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_CAN=m
++CONFIG_CAN_RAW=m
++CONFIG_CAN_BCM=m
++CONFIG_CAN_DEV=m
++CONFIG_CAN_BFIN=m
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRTTY_SIR=m
++CONFIG_BFIN_SIR=m
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=m
++CONFIG_MTD_CFI_AMDSTD=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_PHYSMAP=m
++CONFIG_MTD_NAND=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++CONFIG_PHYLIB=y
++CONFIG_SMSC_PHY=y
++CONFIG_NET_ETHERNET=y
++CONFIG_SMC91X=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_AD7879=y
++CONFIG_TOUCHSCREEN_AD7879_SPI=y
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_BFIN_JTAG_COMM=m
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++CONFIG_SERIAL_BFIN_UART1=y
++CONFIG_SERIAL_BFIN_UART2=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=m
++CONFIG_I2C_BLACKFIN_TWI=m
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_FB=m
++CONFIG_FB_BFIN_LQ035Q1=m
++# CONFIG_USB_SUPPORT is not set
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++# CONFIG_DNOTIFY is not set
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_SMB_FS=m
++CONFIG_DEBUG_KERNEL=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
+new file mode 100644
+index 000000000000..6a68ffc55b5a
+--- /dev/null
++++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
+@@ -0,0 +1,207 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF548_std=y
++CONFIG_IRQ_TIMER0=11
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_CACHELINE_ALIGNED_L1=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_DMA_UNCACHED_2M=y
++CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
++CONFIG_BANK_3=0x99B2
++CONFIG_EBIU_MBSCTLVAL=0x0
++CONFIG_EBIU_MODEVAL=0x1
++CONFIG_EBIU_FCTLVAL=0x6
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_CAN=m
++CONFIG_CAN_RAW=m
++CONFIG_CAN_BCM=m
++CONFIG_CAN_BFIN=m
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRTTY_SIR=m
++CONFIG_BFIN_SIR=m
++CONFIG_BFIN_SIR3=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_FW_LOADER=m
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_M25P80=y
++CONFIG_MTD_NAND=y
++CONFIG_MTD_NAND_BF5XX=y
++# CONFIG_MTD_NAND_BF5XX_HWECC is not set
++CONFIG_MTD_SPI_NOR=y
++CONFIG_BLK_DEV_RAM=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=y
++CONFIG_BLK_DEV_SR=m
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_ATA=y
++# CONFIG_SATA_PMP is not set
++CONFIG_PATA_BF54X=y
++CONFIG_NETDEVICES=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++CONFIG_SMSC911X=y
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++CONFIG_INPUT_FF_MEMLESS=m
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++CONFIG_INPUT_EVBUG=m
++# CONFIG_KEYBOARD_ATKBD is not set
++CONFIG_KEYBOARD_BFIN=y
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_AD7877=m
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART1=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_FB=y
++CONFIG_FIRMWARE_EDID=y
++CONFIG_FB_BF54X_LQ043=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_FONTS=y
++CONFIG_FONT_6x11=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++# CONFIG_LOGO_LINUX_CLUT224 is not set
++# CONFIG_LOGO_BLACKFIN_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=y
++CONFIG_SND_MIXER_OSS=y
++CONFIG_SND_PCM_OSS=y
++CONFIG_SND_SOC=y
++CONFIG_SND_BF5XX_AC97=y
++CONFIG_SND_BF5XX_SOC_AD1980=y
++CONFIG_HID_A4TECH=y
++CONFIG_HID_APPLE=y
++CONFIG_HID_BELKIN=y
++CONFIG_HID_CHERRY=y
++CONFIG_HID_CHICONY=y
++CONFIG_HID_CYPRESS=y
++CONFIG_HID_EZKEY=y
++CONFIG_HID_GYRATION=y
++CONFIG_HID_LOGITECH=y
++CONFIG_HID_MICROSOFT=y
++CONFIG_HID_MONTEREY=y
++CONFIG_HID_PANTHERLORD=y
++CONFIG_HID_PETALYNX=y
++CONFIG_HID_SAMSUNG=y
++CONFIG_HID_SONY=y
++CONFIG_HID_SUNPLUS=y
++CONFIG_USB=y
++# CONFIG_USB_DEVICE_CLASS is not set
++CONFIG_USB_OTG_BLACKLIST_HUB=y
++CONFIG_USB_MON=y
++CONFIG_USB_MUSB_HDRC=y
++CONFIG_USB_MUSB_BLACKFIN=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_GADGET=y
++CONFIG_MMC=y
++CONFIG_MMC_BLOCK=m
++CONFIG_SDH_BFIN=y
++CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++# CONFIG_DNOTIFY is not set
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_NTFS_FS=m
++CONFIG_NTFS_RW=y
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_NFSD=m
++CONFIG_NFSD_V3=y
++CONFIG_CIFS=y
++CONFIG_NLS_CODEPAGE_437=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_UTF8=m
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig
+new file mode 100644
+index 000000000000..e9f3ba783a4e
+--- /dev/null
++++ b/arch/blackfin/configs/BF561-ACVILON_defconfig
+@@ -0,0 +1,149 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_PREEMPT=y
++CONFIG_BF561=y
++CONFIG_BF_REV_0_5=y
++CONFIG_IRQ_TIMER0=10
++CONFIG_BFIN561_ACVILON=y
++# CONFIG_BF561_COREB is not set
++CONFIG_CLKIN_HZ=12000000
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=y
++CONFIG_DMA_UNCACHED_4M=y
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_0=0x99b2
++CONFIG_BANK_1=0x3350
++CONFIG_BANK_3=0xAAC2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_LRO is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_PLATRAM=y
++CONFIG_MTD_PHRAM=y
++CONFIG_MTD_BLOCK2MTD=y
++CONFIG_MTD_NAND=y
++CONFIG_MTD_NAND_PLATFORM=y
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=2
++CONFIG_BLK_DEV_RAM_SIZE=16384
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=y
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++CONFIG_NET_ETHERNET=y
++CONFIG_SMSC911X=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_PIO=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_PCA_PLATFORM=y
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_SPI_SPIDEV=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++CONFIG_GPIO_PCF857X=y
++CONFIG_SENSORS_LM75=y
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_SOUND=y
++CONFIG_SND=y
++CONFIG_SND_MIXER_OSS=y
++CONFIG_SND_PCM_OSS=y
++# CONFIG_SND_DRIVERS is not set
++# CONFIG_SND_USB is not set
++CONFIG_SND_SOC=y
++CONFIG_SND_BF5XX_I2S=y
++CONFIG_SND_BF5XX_SPORT_NUM=1
++CONFIG_USB=y
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++# CONFIG_USB_DEVICE_CLASS is not set
++CONFIG_USB_MON=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_SERIAL=y
++CONFIG_USB_SERIAL_FTDI_SIO=y
++CONFIG_USB_SERIAL_PL2303=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_DS1307=y
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++CONFIG_EXT2_FS_POSIX_ACL=y
++CONFIG_EXT2_FS_SECURITY=y
++# CONFIG_DNOTIFY is not set
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=866
++CONFIG_FAT_DEFAULT_IOCHARSET="cp1251"
++CONFIG_NTFS_FS=y
++CONFIG_CONFIGFS_FS=y
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_COMPRESSION_OPTIONS=y
++# CONFIG_JFFS2_ZLIB is not set
++CONFIG_JFFS2_LZO=y
++# CONFIG_JFFS2_RTIME is not set
++CONFIG_JFFS2_CMODE_FAVOURLZO=y
++CONFIG_CRAMFS=y
++CONFIG_MINIX_FS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++CONFIG_ROOT_NFS=y
++CONFIG_NLS_DEFAULT="cp1251"
++CONFIG_NLS_CODEPAGE_866=y
++CONFIG_NLS_CODEPAGE_1251=y
++CONFIG_NLS_KOI8_R=y
++CONFIG_NLS_UTF8=y
++CONFIG_DEBUG_KERNEL=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++# CONFIG_DEBUG_BUGVERBOSE is not set
++CONFIG_DEBUG_INFO=y
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
++CONFIG_CPLB_INFO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig b/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig
+new file mode 100644
+index 000000000000..89b75a6c3fab
+--- /dev/null
++++ b/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig
+@@ -0,0 +1,112 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF561=y
++CONFIG_SMP=y
++CONFIG_IRQ_TIMER0=10
++CONFIG_CLKIN_HZ=30000000
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0xAAC2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRTTY_SIR=m
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_AMDSTD=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_PHYSMAP=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++CONFIG_SMC91X=y
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++CONFIG_INPUT=m
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++# CONFIG_USB_SUPPORT is not set
++# CONFIG_DNOTIFY is not set
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
+new file mode 100644
+index 000000000000..67b3d2f419ba
+--- /dev/null
++++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
+@@ -0,0 +1,114 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF561=y
++CONFIG_IRQ_TIMER0=10
++CONFIG_CLKIN_HZ=30000000
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
++CONFIG_BFIN_L2_DCACHEABLE=y
++CONFIG_BFIN_L2_WRITETHROUGH=y
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0xAAC2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRTTY_SIR=m
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_AMDSTD=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_PHYSMAP=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++CONFIG_SMC91X=y
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++CONFIG_INPUT=m
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++# CONFIG_USB_SUPPORT is not set
++# CONFIG_DNOTIFY is not set
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF609-EZKIT_defconfig b/arch/blackfin/configs/BF609-EZKIT_defconfig
+new file mode 100644
+index 000000000000..8cc75d4218fb
+--- /dev/null
++++ b/arch/blackfin/configs/BF609-EZKIT_defconfig
+@@ -0,0 +1,154 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF609=y
++CONFIG_PINT1_ASSIGN=0x01010000
++CONFIG_PINT2_ASSIGN=0x07000101
++CONFIG_PINT3_ASSIGN=0x02020303
++CONFIG_IP_CHECKSUM_L1=y
++CONFIG_SYSCALL_TAB_L1=y
++CONFIG_CPLB_SWITCH_TAB_L1=y
++# CONFIG_APP_STACK_L1 is not set
++# CONFIG_BFIN_INS_LOWOVERHEAD is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_PM_BFIN_WAKE_PE12=y
++CONFIG_PM_BFIN_WAKE_PE12_POL=1
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++CONFIG_IP_PNP_RARP=y
++# CONFIG_IPV6 is not set
++CONFIG_NETFILTER=y
++CONFIG_CAN=y
++CONFIG_CAN_BFIN=y
++CONFIG_IRDA=y
++CONFIG_IRTTY_SIR=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_FW_LOADER=m
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_CFI_STAA=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_M25P80=y
++CONFIG_MTD_SPI_NOR=y
++CONFIG_MTD_UBI=m
++CONFIG_SCSI=y
++CONFIG_BLK_DEV_SD=y
++CONFIG_NETDEVICES=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++# CONFIG_NET_VENDOR_SMSC is not set
++CONFIG_STMMAC_ETH=y
++CONFIG_STMMAC_IEEE1588=y
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_BFIN_ROTARY=y
++# CONFIG_SERIO is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_SIMPLE_TIMER=m
++# CONFIG_BFIN_CRC is not set
++CONFIG_BFIN_LINKPORT=y
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_ADI_V3=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++CONFIG_PINCTRL_MCP23S08=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_SOUND=m
++CONFIG_SND=m
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++# CONFIG_SND_DRIVERS is not set
++# CONFIG_SND_SPI is not set
++# CONFIG_SND_USB is not set
++CONFIG_SND_SOC=m
++CONFIG_USB=y
++CONFIG_USB_MUSB_HDRC=y
++CONFIG_USB_MUSB_BLACKFIN=m
++CONFIG_USB_STORAGE=y
++CONFIG_USB_GADGET=y
++CONFIG_USB_GADGET_MUSB_HDRC=y
++CONFIG_USB_ZERO=y
++CONFIG_MMC=y
++CONFIG_SDH_BFIN=y
++# CONFIG_IOMMU_SUPPORT is not set
++CONFIG_EXT2_FS=y
++# CONFIG_DNOTIFY is not set
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_JFFS2_FS=m
++CONFIG_UBIFS_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_ISO8859_1=y
++CONFIG_DEBUG_FS=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++CONFIG_FRAME_POINTER=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO_HMAC=m
++CONFIG_CRYPTO_MD4=m
++CONFIG_CRYPTO_MD5=m
++CONFIG_CRYPTO_ARC4=m
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRYPTO_DEV_BFIN_CRC=m
+diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
+new file mode 100644
+index 000000000000..9faf0ec7007f
+--- /dev/null
++++ b/arch/blackfin/configs/BlackStamp_defconfig
+@@ -0,0 +1,108 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_SYSFS_DEPRECATED_V2=y
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_PREEMPT=y
++CONFIG_BF532=y
++CONFIG_BF_REV_0_5=y
++CONFIG_BLACKSTAMP=y
++CONFIG_TIMER0=11
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_ROMKERNEL=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=y
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0xAAC2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_BINFMT_SHARED_FLAT=y
++CONFIG_PM=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_LRO is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=m
++CONFIG_MTD_CFI_AMDSTD=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_M25P80=y
++CONFIG_MTD_SPI_NOR=y
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_NBD=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_MISC_DEVICES=y
++CONFIG_EEPROM_AT25=y
++CONFIG_NETDEVICES=y
++CONFIG_NET_ETHERNET=y
++CONFIG_SMC91X=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_HW_RANDOM=y
++CONFIG_I2C=m
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_GPIO=m
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_SPI_SPIDEV=m
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++# CONFIG_USB_SUPPORT is not set
++CONFIG_MMC=y
++CONFIG_MMC_SPI=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++# CONFIG_DNOTIFY is not set
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_JFFS2_FS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++CONFIG_NFS_V4=y
++CONFIG_SMB_FS=y
++CONFIG_CIFS=y
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_UTF8=y
++CONFIG_SYSCTL_SYSCALL_CHECK=y
++CONFIG_DEBUG_MMRS=y
++# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_CRC_CCITT=m
+diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
+new file mode 100644
+index 000000000000..4a1ad4fd7bb2
+--- /dev/null
++++ b/arch/blackfin/configs/CM-BF527_defconfig
+@@ -0,0 +1,129 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_KERNEL_LZMA=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_RD_GZIP is not set
++CONFIG_RD_LZMA=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_PREEMPT=y
++CONFIG_BF527=y
++CONFIG_BF_REV_0_1=y
++CONFIG_IRQ_TIMER0=12
++CONFIG_BFIN527_BLUETECHNIX_CM=y
++CONFIG_IRQ_USB_INT0=11
++CONFIG_IRQ_USB_INT1=11
++CONFIG_IRQ_USB_INT2=11
++CONFIG_IRQ_USB_DMA=11
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=y
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0xFFC0
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_GPIO_ADDR=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_SCSI=y
++CONFIG_BLK_DEV_SD=y
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++CONFIG_NET_ETHERNET=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++CONFIG_SERIAL_BFIN_UART1=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_BLACKFIN_TWI=m
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_USB=m
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++# CONFIG_USB_DEVICE_CLASS is not set
++CONFIG_USB_OTG_BLACKLIST_HUB=y
++CONFIG_USB_MON=m
++CONFIG_USB_MUSB_HDRC=m
++CONFIG_USB_MUSB_PERIPHERAL=y
++CONFIG_USB_GADGET_MUSB_HDRC=y
++CONFIG_MUSB_PIO_ONLY=y
++CONFIG_USB_STORAGE=m
++CONFIG_USB_GADGET=m
++CONFIG_USB_ETH=m
++CONFIG_USB_MASS_STORAGE=m
++CONFIG_USB_G_SERIAL=m
++CONFIG_USB_G_PRINTER=m
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++# CONFIG_DNOTIFY is not set
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_JFFS2_FS=y
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_SMB_FS=m
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_ISO8859_1=y
++CONFIG_DEBUG_FS=y
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
++CONFIG_EARLY_PRINTK=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRC_CCITT=m
++CONFIG_CRC_ITU_T=y
++CONFIG_CRC7=y
+diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
+new file mode 100644
+index 000000000000..9d787e28bbe8
+--- /dev/null
++++ b/arch/blackfin/configs/PNAV-10_defconfig
+@@ -0,0 +1,111 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF537=y
++CONFIG_IRQ_TIMER0=12
++CONFIG_PNAV10=y
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++CONFIG_IP_CHECKSUM_L1=y
++CONFIG_SYSCALL_TAB_L1=y
++CONFIG_CPLB_SWITCH_TAB_L1=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=y
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_1=0x33B0
++CONFIG_BANK_2=0x33B0
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_UCLINUX=y
++CONFIG_MTD_NAND=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++CONFIG_NET_ETHERNET=y
++CONFIG_BFIN_MAC=y
++# CONFIG_BFIN_MAC_USE_L1 is not set
++CONFIG_BFIN_TX_DESC_NUM=100
++CONFIG_BFIN_RX_DESC_NUM=100
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_AD7877=y
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_UINPUT=y
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++CONFIG_SERIAL_BFIN_UART1=y
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_HW_RANDOM=y
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_FB=y
++CONFIG_FIRMWARE_EDID=y
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_BACKLIGHT_CLASS_DEVICE=y
++CONFIG_SOUND=y
++CONFIG_SND=m
++# CONFIG_SND_SUPPORT_OLD_API is not set
++# CONFIG_SND_VERBOSE_PROCFS is not set
++CONFIG_SOUND_PRIME=y
++# CONFIG_HID is not set
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++# CONFIG_DNOTIFY is not set
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_SMB_FS=m
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
++# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
++# CONFIG_ACCESS_CHECK is not set
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRC_CCITT=m
+diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
+new file mode 100644
+index 000000000000..225df32dc9a8
+--- /dev/null
++++ b/arch/blackfin/configs/SRV1_defconfig
+@@ -0,0 +1,88 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS_ALL=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_PREEMPT=y
++CONFIG_BF537=y
++CONFIG_IRQ_TIMER0=12
++CONFIG_BOOT_LOAD=0x400000
++CONFIG_CLKIN_HZ=22118400
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_DMA_UNCACHED_2M=y
++CONFIG_C_CDPRIO=y
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_PM=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRTTY_SIR=m
++# CONFIG_WIRELESS is not set
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_JEDECPROBE=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_UCLINUX=y
++CONFIG_MTD_NAND=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_MISC_DEVICES=y
++CONFIG_EEPROM_AT25=m
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_UINPUT=y
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_HWMON=m
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++# CONFIG_HID is not set
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++# CONFIG_DNOTIFY is not set
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_SMB_FS=m
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_BUGVERBOSE is not set
++CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
++CONFIG_CPLB_INFO=y
+diff --git a/arch/blackfin/configs/TCM-BF518_defconfig b/arch/blackfin/configs/TCM-BF518_defconfig
+new file mode 100644
+index 000000000000..425c24e43c34
+--- /dev/null
++++ b/arch/blackfin/configs/TCM-BF518_defconfig
+@@ -0,0 +1,131 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_KERNEL_LZMA=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_RD_GZIP is not set
++CONFIG_RD_LZMA=y
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF518=y
++CONFIG_BF_REV_0_1=y
++CONFIG_BFIN518F_TCM=y
++CONFIG_IRQ_TIMER0=12
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_ADV_OPTIONS=y
++CONFIG_MTD_CFI_GEOMETRY=y
++# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
++# CONFIG_MTD_CFI_I2 is not set
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_PHYSMAP=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++CONFIG_NET_ETHERNET=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_BFIN_JTAG_COMM=m
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++# CONFIG_HID_SUPPORT is not set
++# CONFIG_USB_SUPPORT is not set
++CONFIG_MMC=y
++CONFIG_MMC_DEBUG=y
++CONFIG_MMC_SPI=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=y
++# CONFIG_DNOTIFY is not set
++CONFIG_VFAT_FS=m
++# CONFIG_MISC_FILESYSTEMS is not set
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++CONFIG_ROOT_NFS=y
++CONFIG_NLS_CODEPAGE_437=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_UTF8=m
++CONFIG_DEBUG_KERNEL=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRC_CCITT=m
+diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig
+index 8bcb61a6ec15..6b0912ba544a 100644
+--- a/arch/mips/configs/fuloong2e_defconfig
++++ b/arch/mips/configs/fuloong2e_defconfig
+@@ -4,7 +4,7 @@ CONFIG_SYSVIPC=y
+ CONFIG_POSIX_MQUEUE=y
+ CONFIG_NO_HZ=y
+ CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_BSD_PROCESS_ACCT=y
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig
+index 9d9af5f923c3..acd27816d300 100644
+--- a/arch/mips/configs/gpr_defconfig
++++ b/arch/mips/configs/gpr_defconfig
+@@ -1,8 +1,8 @@
++CONFIG_PREEMPT=y
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SYSVIPC=y
+ CONFIG_POSIX_MQUEUE=y
+ CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_PREEMPT_VOLUNTARY=y
+ CONFIG_BSD_PROCESS_ACCT=y
+ CONFIG_BSD_PROCESS_ACCT_V3=y
+ CONFIG_RELAY=y
+diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
+index ff40fbc2f439..2bca2257a8bb 100644
+--- a/arch/mips/configs/ip22_defconfig
++++ b/arch/mips/configs/ip22_defconfig
+@@ -1,7 +1,7 @@
+ CONFIG_SYSVIPC=y
+ CONFIG_NO_HZ=y
+ CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=14
+diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig
+index 0921ef38e9fb..6da05cef46f8 100644
+--- a/arch/mips/configs/ip28_defconfig
++++ b/arch/mips/configs/ip28_defconfig
+@@ -1,5 +1,5 @@
+ CONFIG_SYSVIPC=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=14
+diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
+index 328d4dfeb4cb..e17cb23173ea 100644
+--- a/arch/mips/configs/jazz_defconfig
++++ b/arch/mips/configs/jazz_defconfig
+@@ -1,6 +1,6 @@
++CONFIG_PREEMPT=y
+ CONFIG_SYSVIPC=y
+ CONFIG_POSIX_MQUEUE=y
+-CONFIG_PREEMPT_VOLUNTARY=y
+ CONFIG_BSD_PROCESS_ACCT=y
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
+index 16bef819fe98..a426aeb3a603 100644
+--- a/arch/mips/configs/mtx1_defconfig
++++ b/arch/mips/configs/mtx1_defconfig
+@@ -1,8 +1,8 @@
++CONFIG_PREEMPT=y
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SYSVIPC=y
+ CONFIG_POSIX_MQUEUE=y
+ CONFIG_AUDIT=y
+-CONFIG_PREEMPT_VOLUNTARY=y
+ CONFIG_BSD_PROCESS_ACCT=y
+ CONFIG_BSD_PROCESS_ACCT_V3=y
+ CONFIG_RELAY=y
+diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig
+index 4ecb157e56d4..ea7309283b01 100644
+--- a/arch/mips/configs/nlm_xlr_defconfig
++++ b/arch/mips/configs/nlm_xlr_defconfig
+@@ -1,10 +1,10 @@
++CONFIG_PREEMPT=y
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SYSVIPC=y
+ CONFIG_POSIX_MQUEUE=y
+ CONFIG_AUDIT=y
+ CONFIG_NO_HZ=y
+ CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_PREEMPT_VOLUNTARY=y
+ CONFIG_BSD_PROCESS_ACCT=y
+ CONFIG_BSD_PROCESS_ACCT_V3=y
+ CONFIG_TASKSTATS=y
+diff --git a/arch/mips/configs/pic32mzda_defconfig b/arch/mips/configs/pic32mzda_defconfig
+index 63fe2da1b37f..7f08ee237345 100644
+--- a/arch/mips/configs/pic32mzda_defconfig
++++ b/arch/mips/configs/pic32mzda_defconfig
+@@ -1,7 +1,7 @@
++CONFIG_PREEMPT=y
+ CONFIG_SYSVIPC=y
+ CONFIG_NO_HZ=y
+ CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_PREEMPT_VOLUNTARY=y
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=14
+diff --git a/arch/mips/configs/pistachio_defconfig b/arch/mips/configs/pistachio_defconfig
+index 2f08d071ada6..11118f5f507a 100644
+--- a/arch/mips/configs/pistachio_defconfig
++++ b/arch/mips/configs/pistachio_defconfig
+@@ -1,9 +1,9 @@
++CONFIG_PREEMPT=y
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_DEFAULT_HOSTNAME="localhost"
+ CONFIG_SYSVIPC=y
+ CONFIG_NO_HZ=y
+ CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_PREEMPT_VOLUNTARY=y
+ CONFIG_IKCONFIG=m
+ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=18
+diff --git a/arch/mips/configs/pnx8335_stb225_defconfig b/arch/mips/configs/pnx8335_stb225_defconfig
+index aa0b169800e0..d2177f598a1d 100644
+--- a/arch/mips/configs/pnx8335_stb225_defconfig
++++ b/arch/mips/configs/pnx8335_stb225_defconfig
+@@ -1,9 +1,9 @@
++CONFIG_PREEMPT=y
+ # CONFIG_LOCALVERSION_AUTO is not set
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
+ CONFIG_NO_HZ=y
+ CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_PREEMPT_VOLUNTARY=y
+ CONFIG_LOG_BUF_SHIFT=14
+ CONFIG_EXPERT=y
+ CONFIG_SLAB=y
+diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
+index 0f4b09f8a0ee..6ba5086f6dff 100644
+--- a/arch/mips/configs/rm200_defconfig
++++ b/arch/mips/configs/rm200_defconfig
+@@ -1,6 +1,6 @@
++CONFIG_PREEMPT=y
+ CONFIG_SYSVIPC=y
+ CONFIG_POSIX_MQUEUE=y
+-CONFIG_PREEMPT_VOLUNTARY=y
+ CONFIG_BSD_PROCESS_ACCT=y
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
+index ccc109761f44..a6a5b0b7a9c9 100644
+--- a/arch/parisc/configs/712_defconfig
++++ b/arch/parisc/configs/712_defconfig
+@@ -13,7 +13,7 @@ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+ CONFIG_MODULE_FORCE_UNLOAD=y
+ CONFIG_PA7100LC=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_GSC_LASI=y
+ # CONFIG_PDC_CHASSIS is not set
+ CONFIG_BINFMT_MISC=m
+diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
+index 8d41a73bd71b..b8e0a6662ff9 100644
+--- a/arch/parisc/configs/c3000_defconfig
++++ b/arch/parisc/configs/c3000_defconfig
+@@ -13,7 +13,7 @@ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+ CONFIG_MODULE_FORCE_UNLOAD=y
+ CONFIG_PA8X00=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ # CONFIG_GSC is not set
+ CONFIG_PCI=y
+ CONFIG_PCI_LBA=y
+diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/default_defconfig
+index 52c9050a7c5c..8d86d2e989f4 100644
+--- a/arch/parisc/configs/default_defconfig
++++ b/arch/parisc/configs/default_defconfig
+@@ -14,7 +14,7 @@ CONFIG_MODULE_UNLOAD=y
+ CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_BLK_DEV_BSG is not set
+ CONFIG_PA7100LC=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_IOMMU_CCIO=y
+ CONFIG_GSC_LASI=y
+ CONFIG_GSC_WAX=y
+diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
+new file mode 100644
+index 000000000000..04fee07ea6c5
+--- /dev/null
++++ b/arch/powerpc/configs/c2k_defconfig
+@@ -0,0 +1,389 @@
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_AUDIT=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++CONFIG_PARTITION_ADVANCED=y
++CONFIG_OSF_PARTITION=y
++CONFIG_MAC_PARTITION=y
++CONFIG_BSD_DISKLABEL=y
++CONFIG_MINIX_SUBPARTITION=y
++CONFIG_SOLARIS_X86_PARTITION=y
++CONFIG_UNIXWARE_DISKLABEL=y
++CONFIG_SGI_PARTITION=y
++CONFIG_SUN_PARTITION=y
++# CONFIG_PPC_CHRP is not set
++# CONFIG_PPC_PMAC is not set
++CONFIG_EMBEDDED6xx=y
++CONFIG_PPC_C2K=y
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=m
++CONFIG_CPU_FREQ_GOV_ONDEMAND=m
++CONFIG_GEN_RTC=y
++CONFIG_HIGHMEM=y
++CONFIG_PREEMPT=y
++CONFIG_BINFMT_MISC=y
++CONFIG_PM=y
++CONFIG_PCI_MSI=y
++CONFIG_HOTPLUG_PCI=y
++CONFIG_HOTPLUG_PCI_SHPC=m
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_XFRM_USER=y
++CONFIG_NET_KEY=m
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_IP_MULTIPLE_TABLES=y
++CONFIG_IP_ROUTE_MULTIPATH=y
++CONFIG_IP_ROUTE_VERBOSE=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_NET_IPIP=m
++CONFIG_IP_MROUTE=y
++CONFIG_IP_PIMSM_V1=y
++CONFIG_IP_PIMSM_V2=y
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++CONFIG_INET_IPCOMP=m
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++CONFIG_IPV6_TUNNEL=m
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_MATCH_ECN=m
++CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_ECN=m
++CONFIG_IP_NF_RAW=m
++CONFIG_IP_NF_ARPTABLES=m
++CONFIG_IP_NF_ARPFILTER=m
++CONFIG_IP_NF_ARP_MANGLE=m
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_HL=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_MANGLE=m
++CONFIG_IP6_NF_RAW=m
++CONFIG_BRIDGE_NF_EBTABLES=m
++CONFIG_BRIDGE_EBT_BROUTE=m
++CONFIG_BRIDGE_EBT_T_FILTER=m
++CONFIG_BRIDGE_EBT_T_NAT=m
++CONFIG_BRIDGE_EBT_802_3=m
++CONFIG_BRIDGE_EBT_AMONG=m
++CONFIG_BRIDGE_EBT_ARP=m
++CONFIG_BRIDGE_EBT_IP=m
++CONFIG_BRIDGE_EBT_LIMIT=m
++CONFIG_BRIDGE_EBT_MARK=m
++CONFIG_BRIDGE_EBT_PKTTYPE=m
++CONFIG_BRIDGE_EBT_STP=m
++CONFIG_BRIDGE_EBT_VLAN=m
++CONFIG_BRIDGE_EBT_ARPREPLY=m
++CONFIG_BRIDGE_EBT_DNAT=m
++CONFIG_BRIDGE_EBT_MARK_T=m
++CONFIG_BRIDGE_EBT_REDIRECT=m
++CONFIG_BRIDGE_EBT_SNAT=m
++CONFIG_BRIDGE_EBT_LOG=m
++CONFIG_IP_SCTP=m
++CONFIG_ATM=m
++CONFIG_ATM_CLIP=m
++CONFIG_ATM_LANE=m
++CONFIG_ATM_BR2684=m
++CONFIG_BRIDGE=m
++CONFIG_VLAN_8021Q=m
++CONFIG_NET_SCHED=y
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++CONFIG_NET_SCH_ATM=m
++CONFIG_NET_SCH_PRIO=m
++CONFIG_NET_SCH_RED=m
++CONFIG_NET_SCH_SFQ=m
++CONFIG_NET_SCH_TEQL=m
++CONFIG_NET_SCH_TBF=m
++CONFIG_NET_SCH_GRED=m
++CONFIG_NET_SCH_DSMARK=m
++CONFIG_NET_SCH_NETEM=m
++CONFIG_NET_CLS_TCINDEX=m
++CONFIG_NET_CLS_ROUTE4=m
++CONFIG_NET_CLS_FW=m
++CONFIG_NET_CLS_U32=m
++CONFIG_CLS_U32_PERF=y
++CONFIG_NET_CLS_RSVP=m
++CONFIG_NET_CLS_RSVP6=m
++CONFIG_NET_CLS_IND=y
++CONFIG_BT=m
++CONFIG_BT_RFCOMM=m
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=m
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++CONFIG_BT_HIDP=m
++CONFIG_BT_HCIUART=m
++CONFIG_BT_HCIUART_H4=y
++CONFIG_BT_HCIUART_BCSP=y
++CONFIG_BT_HCIBCM203X=m
++CONFIG_BT_HCIBFUSB=m
++CONFIG_BT_HCIVHCI=m
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_AMDSTD=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_PHYSMAP_OF=y
++CONFIG_BLK_DEV_LOOP=m
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_SIZE=16384
++CONFIG_SCSI=m
++CONFIG_BLK_DEV_SD=m
++CONFIG_CHR_DEV_ST=m
++CONFIG_CHR_DEV_OSST=m
++CONFIG_BLK_DEV_SR=m
++CONFIG_BLK_DEV_SR_VENDOR=y
++CONFIG_CHR_DEV_SG=m
++CONFIG_SCSI_CONSTANTS=y
++CONFIG_SCSI_LOGGING=y
++CONFIG_SCSI_ISCSI_ATTRS=m
++CONFIG_BLK_DEV_3W_XXXX_RAID=m
++CONFIG_SCSI_3W_9XXX=m
++CONFIG_SCSI_ACARD=m
++CONFIG_SCSI_AACRAID=m
++CONFIG_SCSI_AIC7XXX=m
++CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
++CONFIG_AIC7XXX_RESET_DELAY_MS=15000
++# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
++# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
++CONFIG_SCSI_AIC79XX=m
++CONFIG_AIC79XX_CMDS_PER_DEVICE=4
++CONFIG_AIC79XX_RESET_DELAY_MS=15000
++# CONFIG_AIC79XX_DEBUG_ENABLE is not set
++# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
++CONFIG_SCSI_ARCMSR=m
++CONFIG_MEGARAID_NEWGEN=y
++CONFIG_MEGARAID_MM=m
++CONFIG_MEGARAID_MAILBOX=m
++CONFIG_MEGARAID_SAS=m
++CONFIG_SCSI_GDTH=m
++CONFIG_SCSI_IPS=m
++CONFIG_SCSI_INITIO=m
++CONFIG_SCSI_SYM53C8XX_2=m
++CONFIG_SCSI_QLOGIC_1280=m
++CONFIG_NETDEVICES=y
++CONFIG_BONDING=m
++CONFIG_DUMMY=m
++CONFIG_NETCONSOLE=m
++CONFIG_TUN=m
++# CONFIG_ATM_DRIVERS is not set
++CONFIG_MV643XX_ETH=y
++CONFIG_VITESSE_PHY=y
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_UINPUT=m
++# CONFIG_SERIO is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_SERIAL_NONSTANDARD=y
++CONFIG_SERIAL_MPSC=y
++CONFIG_SERIAL_MPSC_CONSOLE=y
++CONFIG_NVRAM=m
++CONFIG_RAW_DRIVER=y
++CONFIG_MAX_RAW_DEVS=8192
++CONFIG_I2C=m
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_MV64XXX=m
++CONFIG_HWMON=m
++CONFIG_SENSORS_ADM1021=m
++CONFIG_SENSORS_ADM1025=m
++CONFIG_SENSORS_ADM1026=m
++CONFIG_SENSORS_ADM1031=m
++CONFIG_SENSORS_DS1621=m
++CONFIG_SENSORS_GL518SM=m
++CONFIG_SENSORS_MAX1619=m
++CONFIG_SENSORS_LM75=m
++CONFIG_SENSORS_LM77=m
++CONFIG_SENSORS_LM78=m
++CONFIG_SENSORS_LM80=m
++CONFIG_SENSORS_LM83=m
++CONFIG_SENSORS_LM85=m
++CONFIG_SENSORS_LM87=m
++CONFIG_SENSORS_LM90=m
++CONFIG_SENSORS_PCF8591=m
++CONFIG_SENSORS_VIA686A=m
++CONFIG_SENSORS_W83781D=m
++CONFIG_SENSORS_W83L785TS=m
++CONFIG_WATCHDOG=y
++CONFIG_SOFT_WATCHDOG=m
++CONFIG_PCIPCWATCHDOG=m
++CONFIG_WDTPCI=m
++CONFIG_USBPCWATCHDOG=m
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_USB=m
++CONFIG_USB_MON=m
++CONFIG_USB_EHCI_HCD=m
++CONFIG_USB_EHCI_ROOT_HUB_TT=y
++CONFIG_USB_OHCI_HCD=m
++CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
++CONFIG_USB_UHCI_HCD=m
++CONFIG_USB_ACM=m
++CONFIG_USB_PRINTER=m
++CONFIG_USB_STORAGE=m
++CONFIG_USB_STORAGE_DATAFAB=m
++CONFIG_USB_STORAGE_FREECOM=m
++CONFIG_USB_STORAGE_ISD200=m
++CONFIG_USB_STORAGE_SDDR09=m
++CONFIG_USB_STORAGE_SDDR55=m
++CONFIG_USB_STORAGE_JUMPSHOT=m
++CONFIG_USB_MDC800=m
++CONFIG_USB_MICROTEK=m
++CONFIG_USB_SERIAL=m
++CONFIG_USB_SERIAL_GENERIC=y
++CONFIG_USB_SERIAL_BELKIN=m
++CONFIG_USB_SERIAL_WHITEHEAT=m
++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
++CONFIG_USB_SERIAL_EMPEG=m
++CONFIG_USB_SERIAL_FTDI_SIO=m
++CONFIG_USB_SERIAL_VISOR=m
++CONFIG_USB_SERIAL_IPAQ=m
++CONFIG_USB_SERIAL_IR=m
++CONFIG_USB_SERIAL_EDGEPORT=m
++CONFIG_USB_SERIAL_EDGEPORT_TI=m
++CONFIG_USB_SERIAL_KEYSPAN_PDA=m
++CONFIG_USB_SERIAL_KEYSPAN=m
++CONFIG_USB_SERIAL_KLSI=m
++CONFIG_USB_SERIAL_KOBIL_SCT=m
++CONFIG_USB_SERIAL_MCT_U232=m
++CONFIG_USB_SERIAL_PL2303=m
++CONFIG_USB_SERIAL_SAFE=m
++CONFIG_USB_SERIAL_SAFE_PADDED=y
++CONFIG_USB_SERIAL_CYBERJACK=m
++CONFIG_USB_SERIAL_XIRCOM=m
++CONFIG_USB_SERIAL_OMNINET=m
++CONFIG_USB_EMI62=m
++CONFIG_USB_RIO500=m
++CONFIG_USB_LEGOTOWER=m
++CONFIG_USB_LCD=m
++CONFIG_USB_LED=m
++CONFIG_USB_TEST=m
++CONFIG_USB_ATM=m
++CONFIG_USB_SPEEDTOUCH=m
++CONFIG_INFINIBAND=m
++CONFIG_INFINIBAND_USER_MAD=m
++CONFIG_INFINIBAND_USER_ACCESS=m
++CONFIG_INFINIBAND_MTHCA=m
++CONFIG_INFINIBAND_IPOIB=m
++CONFIG_INFINIBAND_IPOIB_CM=y
++CONFIG_INFINIBAND_SRP=m
++CONFIG_DMADEVICES=y
++CONFIG_EXT4_FS=m
++CONFIG_EXT4_FS_POSIX_ACL=y
++CONFIG_EXT4_FS_SECURITY=y
++CONFIG_QUOTA=y
++CONFIG_QFMT_V2=y
++CONFIG_AUTOFS4_FS=m
++CONFIG_UDF_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
++CONFIG_PROC_KCORE=y
++CONFIG_TMPFS=y
++CONFIG_HFS_FS=m
++CONFIG_HFSPLUS_FS=m
++CONFIG_JFFS2_FS=y
++CONFIG_CRAMFS=m
++CONFIG_VXFS_FS=m
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=y
++CONFIG_ROOT_NFS=y
++CONFIG_CIFS=m
++CONFIG_CIFS_XATTR=y
++CONFIG_CIFS_POSIX=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="utf8"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=m
++CONFIG_NLS_CODEPAGE_775=m
++CONFIG_NLS_CODEPAGE_850=m
++CONFIG_NLS_CODEPAGE_852=m
++CONFIG_NLS_CODEPAGE_855=m
++CONFIG_NLS_CODEPAGE_857=m
++CONFIG_NLS_CODEPAGE_860=m
++CONFIG_NLS_CODEPAGE_861=m
++CONFIG_NLS_CODEPAGE_862=m
++CONFIG_NLS_CODEPAGE_863=m
++CONFIG_NLS_CODEPAGE_864=m
++CONFIG_NLS_CODEPAGE_865=m
++CONFIG_NLS_CODEPAGE_866=m
++CONFIG_NLS_CODEPAGE_869=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++CONFIG_NLS_CODEPAGE_932=m
++CONFIG_NLS_CODEPAGE_949=m
++CONFIG_NLS_CODEPAGE_874=m
++CONFIG_NLS_ISO8859_8=m
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_ISO8859_2=m
++CONFIG_NLS_ISO8859_3=m
++CONFIG_NLS_ISO8859_4=m
++CONFIG_NLS_ISO8859_5=m
++CONFIG_NLS_ISO8859_6=m
++CONFIG_NLS_ISO8859_7=m
++CONFIG_NLS_ISO8859_9=m
++CONFIG_NLS_ISO8859_13=m
++CONFIG_NLS_ISO8859_14=m
++CONFIG_NLS_ISO8859_15=m
++CONFIG_NLS_KOI8_R=m
++CONFIG_NLS_KOI8_U=m
++CONFIG_CRC_CCITT=m
++CONFIG_CRC_T10DIF=m
++CONFIG_DEBUG_INFO=y
++CONFIG_MAGIC_SYSRQ=y
++CONFIG_DEBUG_KERNEL=y
++CONFIG_DEBUG_STACK_USAGE=y
++CONFIG_DEBUG_HIGHMEM=y
++CONFIG_DEBUG_STACKOVERFLOW=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_SPINLOCK=y
++CONFIG_BOOTX_TEXT=y
++CONFIG_PPC_EARLY_DEBUG=y
++CONFIG_SECURITY=y
++CONFIG_SECURITY_NETWORK=y
++CONFIG_SECURITY_SELINUX=y
++CONFIG_SECURITY_SELINUX_BOOTPARAM=y
++CONFIG_SECURITY_SELINUX_DISABLE=y
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_MICHAEL_MIC=m
++CONFIG_CRYPTO_SHA1=y
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_WP512=m
++CONFIG_CRYPTO_BLOWFISH=m
++CONFIG_CRYPTO_CAST6=m
++CONFIG_CRYPTO_KHAZAD=m
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_TWOFISH=m
+diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
+index 7c6baf6df139..9aea58fa9dba 100644
+--- a/arch/powerpc/configs/ppc6xx_defconfig
++++ b/arch/powerpc/configs/ppc6xx_defconfig
+@@ -74,7 +74,7 @@ CONFIG_QE_GPIO=y
+ CONFIG_MCU_MPC8349EMITX=y
+ CONFIG_HIGHMEM=y
+ CONFIG_HZ_1000=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_BINFMT_MISC=y
+ CONFIG_HIBERNATION=y
+ CONFIG_PM_DEBUG=y
+diff --git a/arch/score/configs/spct6600_defconfig b/arch/score/configs/spct6600_defconfig
+new file mode 100644
+index 000000000000..46434ca1fa10
+--- /dev/null
++++ b/arch/score/configs/spct6600_defconfig
+@@ -0,0 +1,84 @@
++CONFIG_HZ_100=y
++CONFIG_PREEMPT=y
++CONFIG_EXPERIMENTAL=y
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_LOG_BUF_SHIFT=12
++CONFIG_SYSFS_DEPRECATED_V2=y
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_KALLSYMS is not set
++# CONFIG_HOTPLUG is not set
++CONFIG_SLAB=y
++CONFIG_MODULES=y
++CONFIG_MODULE_FORCE_LOAD=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_BLK_DEV_BSG is not set
++CONFIG_BINFMT_MISC=y
++CONFIG_NET=y
++CONFIG_UNIX=y
++CONFIG_NET_KEY=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_ARPD=y
++# CONFIG_INET_LRO is not set
++# CONFIG_IPV6 is not set
++# CONFIG_STANDALONE is not set
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_CRYPTOLOOP=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=1
++# CONFIG_MISC_DEVICES is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++CONFIG_SERIAL_NONSTANDARD=y
++CONFIG_STALDRV=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_RAW_DRIVER=y
++CONFIG_MAX_RAW_DEVS=8192
++# CONFIG_HWMON is not set
++# CONFIG_VGA_CONSOLE is not set
++# CONFIG_HID_SUPPORT is not set
++# CONFIG_USB_SUPPORT is not set
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++CONFIG_EXT2_FS_POSIX_ACL=y
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
++CONFIG_EXT3_FS_POSIX_ACL=y
++CONFIG_AUTOFS_FS=y
++CONFIG_AUTOFS4_FS=y
++CONFIG_PROC_KCORE=y
++# CONFIG_PROC_PAGE_MONITOR is not set
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=y
++CONFIG_NFSD=y
++CONFIG_NFSD_V3_ACL=y
++CONFIG_NFSD_V4=y
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++CONFIG_SECURITY=y
++CONFIG_SECURITY_NETWORK=y
++CONFIG_CRYPTO_NULL=y
++CONFIG_CRYPTO_CRYPTD=y
++CONFIG_CRYPTO_SEQIV=y
++CONFIG_CRYPTO_MD4=y
++CONFIG_CRYPTO_MICHAEL_MIC=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_CRYPTO_HW is not set
++CONFIG_CRC_CCITT=y
++CONFIG_CRC16=y
++CONFIG_LIBCRC32C=y
+diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
+index 5a1097641247..eb5fbf554e7f 100644
+--- a/arch/sh/configs/se7712_defconfig
++++ b/arch/sh/configs/se7712_defconfig
+@@ -23,7 +23,7 @@ CONFIG_FLATMEM_MANUAL=y
+ CONFIG_SH_SOLUTION_ENGINE=y
+ CONFIG_SH_PCLK_FREQ=66666666
+ CONFIG_HEARTBEAT=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_CMDLINE_OVERWRITE=y
+ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
+ CONFIG_NET=y
+diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
+index 9c0ef13bee10..cbaa65c8bf9e 100644
+--- a/arch/sh/configs/se7721_defconfig
++++ b/arch/sh/configs/se7721_defconfig
+@@ -23,7 +23,7 @@ CONFIG_FLATMEM_MANUAL=y
+ CONFIG_SH_7721_SOLUTION_ENGINE=y
+ CONFIG_SH_PCLK_FREQ=33333333
+ CONFIG_HEARTBEAT=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_CMDLINE_OVERWRITE=y
+ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
+ CONFIG_NET=y
+diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
+index ceb48e9b70f4..1a69eda6610c 100644
+--- a/arch/sh/configs/titan_defconfig
++++ b/arch/sh/configs/titan_defconfig
+@@ -20,7 +20,7 @@ CONFIG_SH_TITAN=y
+ CONFIG_SH_PCLK_FREQ=30000000
+ CONFIG_SH_DMA=y
+ CONFIG_SH_DMA_API=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_CMDLINE_OVERWRITE=y
+ CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
+ CONFIG_PCI=y
+diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
+index ea547d596fcf..e1f11071da4c 100644
+--- a/arch/sparc/configs/sparc64_defconfig
++++ b/arch/sparc/configs/sparc64_defconfig
+@@ -22,7 +22,7 @@ CONFIG_NO_HZ=y
+ CONFIG_HIGH_RES_TIMERS=y
+ CONFIG_NUMA=y
+ CONFIG_DEFAULT_MMAP_MIN_ADDR=8192
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_SUN_LDOMS=y
+ CONFIG_PCI=y
+ CONFIG_PCI_MSI=y
+diff --git a/arch/tile/configs/tilegx_defconfig b/arch/tile/configs/tilegx_defconfig
+new file mode 100644
+index 000000000000..939c63ba7e6e
+--- /dev/null
++++ b/arch/tile/configs/tilegx_defconfig
+@@ -0,0 +1,411 @@
++CONFIG_TILEGX=y
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_FHANDLE=y
++CONFIG_AUDIT=y
++CONFIG_NO_HZ=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++CONFIG_TASKSTATS=y
++CONFIG_TASK_DELAY_ACCT=y
++CONFIG_TASK_XACCT=y
++CONFIG_TASK_IO_ACCOUNTING=y
++CONFIG_LOG_BUF_SHIFT=19
++CONFIG_CGROUPS=y
++CONFIG_CGROUP_DEBUG=y
++CONFIG_CGROUP_DEVICE=y
++CONFIG_CPUSETS=y
++CONFIG_CGROUP_CPUACCT=y
++CONFIG_CGROUP_SCHED=y
++CONFIG_RT_GROUP_SCHED=y
++CONFIG_BLK_CGROUP=y
++CONFIG_NAMESPACES=y
++CONFIG_RELAY=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_RD_XZ=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_EMBEDDED=y
++# CONFIG_COMPAT_BRK is not set
++CONFIG_PROFILING=y
++CONFIG_KPROBES=y
++CONFIG_MODULES=y
++CONFIG_MODULE_FORCE_LOAD=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_BLK_DEV_INTEGRITY=y
++CONFIG_PARTITION_ADVANCED=y
++CONFIG_OSF_PARTITION=y
++CONFIG_AMIGA_PARTITION=y
++CONFIG_MAC_PARTITION=y
++CONFIG_BSD_DISKLABEL=y
++CONFIG_MINIX_SUBPARTITION=y
++CONFIG_SOLARIS_X86_PARTITION=y
++CONFIG_UNIXWARE_DISKLABEL=y
++CONFIG_SGI_PARTITION=y
++CONFIG_SUN_PARTITION=y
++CONFIG_KARMA_PARTITION=y
++CONFIG_CFQ_GROUP_IOSCHED=y
++CONFIG_NR_CPUS=100
++CONFIG_HZ_100=y
++# CONFIG_COMPACTION is not set
++CONFIG_PREEMPT=y
++CONFIG_TILE_PCI_IO=y
++CONFIG_PCI_DEBUG=y
++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
++CONFIG_BINFMT_MISC=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_XFRM_USER=y
++CONFIG_XFRM_SUB_POLICY=y
++CONFIG_XFRM_STATISTICS=y
++CONFIG_NET_KEY=m
++CONFIG_NET_KEY_MIGRATE=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_IP_MULTIPLE_TABLES=y
++CONFIG_IP_ROUTE_MULTIPATH=y
++CONFIG_IP_ROUTE_VERBOSE=y
++CONFIG_NET_IPIP=m
++CONFIG_IP_MROUTE=y
++CONFIG_IP_PIMSM_V1=y
++CONFIG_IP_PIMSM_V2=y
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++CONFIG_INET_IPCOMP=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++CONFIG_INET_DIAG=m
++CONFIG_TCP_CONG_ADVANCED=y
++CONFIG_TCP_CONG_HSTCP=m
++CONFIG_TCP_CONG_HYBLA=m
++CONFIG_TCP_CONG_SCALABLE=m
++CONFIG_TCP_CONG_LP=m
++CONFIG_TCP_CONG_VENO=m
++CONFIG_TCP_CONG_YEAH=m
++CONFIG_TCP_CONG_ILLINOIS=m
++CONFIG_TCP_MD5SIG=y
++CONFIG_IPV6=y
++CONFIG_IPV6_ROUTER_PREF=y
++CONFIG_IPV6_ROUTE_INFO=y
++CONFIG_IPV6_OPTIMISTIC_DAD=y
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++CONFIG_IPV6_MIP6=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_TUNNEL=m
++CONFIG_IPV6_MULTIPLE_TABLES=y
++CONFIG_IPV6_MROUTE=y
++CONFIG_IPV6_PIMSM_V2=y
++CONFIG_NETLABEL=y
++CONFIG_RDS=m
++CONFIG_RDS_TCP=m
++CONFIG_BRIDGE=m
++CONFIG_VLAN_8021Q=m
++CONFIG_VLAN_8021Q_GVRP=y
++CONFIG_PHONET=m
++CONFIG_NET_SCHED=y
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++CONFIG_NET_SCH_PRIO=m
++CONFIG_NET_SCH_MULTIQ=m
++CONFIG_NET_SCH_RED=m
++CONFIG_NET_SCH_SFQ=m
++CONFIG_NET_SCH_TEQL=m
++CONFIG_NET_SCH_TBF=m
++CONFIG_NET_SCH_GRED=m
++CONFIG_NET_SCH_DSMARK=m
++CONFIG_NET_SCH_NETEM=m
++CONFIG_NET_SCH_DRR=m
++CONFIG_NET_SCH_INGRESS=m
++CONFIG_NET_CLS_BASIC=m
++CONFIG_NET_CLS_TCINDEX=m
++CONFIG_NET_CLS_ROUTE4=m
++CONFIG_NET_CLS_FW=m
++CONFIG_NET_CLS_U32=m
++CONFIG_CLS_U32_PERF=y
++CONFIG_CLS_U32_MARK=y
++CONFIG_NET_CLS_RSVP=m
++CONFIG_NET_CLS_RSVP6=m
++CONFIG_NET_CLS_FLOW=m
++CONFIG_NET_CLS_CGROUP=y
++CONFIG_NET_EMATCH=y
++CONFIG_NET_EMATCH_CMP=m
++CONFIG_NET_EMATCH_NBYTE=m
++CONFIG_NET_EMATCH_U32=m
++CONFIG_NET_EMATCH_META=m
++CONFIG_NET_EMATCH_TEXT=m
++CONFIG_NET_CLS_ACT=y
++CONFIG_NET_ACT_POLICE=m
++CONFIG_NET_ACT_GACT=m
++CONFIG_GACT_PROB=y
++CONFIG_NET_ACT_MIRRED=m
++CONFIG_NET_ACT_NAT=m
++CONFIG_NET_ACT_PEDIT=m
++CONFIG_NET_ACT_SIMP=m
++CONFIG_NET_ACT_SKBEDIT=m
++CONFIG_NET_CLS_IND=y
++CONFIG_DCB=y
++CONFIG_DNS_RESOLVER=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_CONNECTOR=y
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++CONFIG_BLK_DEV_SX8=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_SIZE=16384
++CONFIG_ATA_OVER_ETH=m
++CONFIG_RAID_ATTRS=m
++CONFIG_BLK_DEV_SD=y
++CONFIG_SCSI_CONSTANTS=y
++CONFIG_SCSI_LOGGING=y
++CONFIG_SCSI_SAS_ATA=y
++CONFIG_ISCSI_TCP=m
++CONFIG_SCSI_MVSAS=y
++# CONFIG_SCSI_MVSAS_DEBUG is not set
++CONFIG_SCSI_MVSAS_TASKLET=y
++CONFIG_ATA=y
++CONFIG_SATA_AHCI=y
++CONFIG_SATA_SIL24=y
++# CONFIG_ATA_SFF is not set
++CONFIG_MD=y
++CONFIG_BLK_DEV_MD=y
++CONFIG_MD_LINEAR=m
++CONFIG_MD_RAID0=m
++CONFIG_MD_RAID1=m
++CONFIG_MD_RAID10=m
++CONFIG_MD_RAID456=m
++CONFIG_MD_FAULTY=m
++CONFIG_BLK_DEV_DM=m
++CONFIG_DM_DEBUG=y
++CONFIG_DM_CRYPT=m
++CONFIG_DM_SNAPSHOT=m
++CONFIG_DM_MIRROR=m
++CONFIG_DM_LOG_USERSPACE=m
++CONFIG_DM_ZERO=m
++CONFIG_DM_MULTIPATH=m
++CONFIG_DM_MULTIPATH_QL=m
++CONFIG_DM_MULTIPATH_ST=m
++CONFIG_DM_DELAY=m
++CONFIG_DM_UEVENT=y
++CONFIG_TARGET_CORE=m
++CONFIG_TCM_IBLOCK=m
++CONFIG_TCM_FILEIO=m
++CONFIG_TCM_PSCSI=m
++CONFIG_LOOPBACK_TARGET=m
++CONFIG_ISCSI_TARGET=m
++CONFIG_FUSION=y
++CONFIG_FUSION_SAS=y
++CONFIG_NETDEVICES=y
++CONFIG_BONDING=m
++CONFIG_DUMMY=m
++CONFIG_IFB=m
++CONFIG_MACVLAN=m
++CONFIG_MACVTAP=m
++CONFIG_NETCONSOLE=m
++CONFIG_NETCONSOLE_DYNAMIC=y
++CONFIG_TUN=y
++CONFIG_VETH=m
++CONFIG_NET_DSA_MV88E6060=y
++CONFIG_NET_DSA_MV88E6XXX=y
++CONFIG_SKY2=y
++CONFIG_PTP_1588_CLOCK_TILEGX=y
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_SERIAL_TILEGX=y
++CONFIG_HW_RANDOM=y
++CONFIG_HW_RANDOM_TIMERIOMEM=m
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++# CONFIG_VGA_ARB is not set
++CONFIG_DRM=m
++CONFIG_DRM_TDFX=m
++CONFIG_DRM_R128=m
++CONFIG_DRM_MGA=m
++CONFIG_DRM_VIA=m
++CONFIG_DRM_SAVAGE=m
++CONFIG_USB=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_STORAGE=y
++CONFIG_EDAC=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_TILE=y
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++CONFIG_EXT2_FS_POSIX_ACL=y
++CONFIG_EXT2_FS_SECURITY=y
++CONFIG_EXT2_FS_XIP=y
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_POSIX_ACL=y
++CONFIG_EXT3_FS_SECURITY=y
++CONFIG_EXT4_FS=y
++CONFIG_EXT4_FS_POSIX_ACL=y
++CONFIG_EXT4_FS_SECURITY=y
++CONFIG_XFS_FS=y
++CONFIG_XFS_QUOTA=y
++CONFIG_XFS_POSIX_ACL=y
++CONFIG_GFS2_FS=m
++CONFIG_GFS2_FS_LOCKING_DLM=y
++CONFIG_BTRFS_FS=m
++CONFIG_BTRFS_FS_POSIX_ACL=y
++CONFIG_QUOTA=y
++CONFIG_QUOTA_NETLINK_INTERFACE=y
++# CONFIG_PRINT_QUOTA_WARNING is not set
++CONFIG_QFMT_V2=y
++CONFIG_AUTOFS4_FS=m
++CONFIG_FUSE_FS=y
++CONFIG_CUSE=m
++CONFIG_FSCACHE=m
++CONFIG_FSCACHE_STATS=y
++CONFIG_CACHEFILES=m
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_UDF_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
++CONFIG_PROC_KCORE=y
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++CONFIG_HUGETLBFS=y
++CONFIG_ECRYPT_FS=m
++CONFIG_CRAMFS=m
++CONFIG_SQUASHFS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=m
++CONFIG_NFS_V4_1=y
++CONFIG_NFS_FSCACHE=y
++CONFIG_NFSD=m
++CONFIG_NFSD_V3_ACL=y
++CONFIG_NFSD_V4=y
++CONFIG_CIFS=m
++CONFIG_CIFS_STATS=y
++CONFIG_CIFS_WEAK_PW_HASH=y
++CONFIG_CIFS_UPCALL=y
++CONFIG_CIFS_XATTR=y
++CONFIG_CIFS_POSIX=y
++CONFIG_CIFS_DFS_UPCALL=y
++CONFIG_CIFS_FSCACHE=y
++CONFIG_NLS_DEFAULT="utf8"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=m
++CONFIG_NLS_CODEPAGE_775=m
++CONFIG_NLS_CODEPAGE_850=m
++CONFIG_NLS_CODEPAGE_852=m
++CONFIG_NLS_CODEPAGE_855=m
++CONFIG_NLS_CODEPAGE_857=m
++CONFIG_NLS_CODEPAGE_860=m
++CONFIG_NLS_CODEPAGE_861=m
++CONFIG_NLS_CODEPAGE_862=m
++CONFIG_NLS_CODEPAGE_863=m
++CONFIG_NLS_CODEPAGE_864=m
++CONFIG_NLS_CODEPAGE_865=m
++CONFIG_NLS_CODEPAGE_866=m
++CONFIG_NLS_CODEPAGE_869=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++CONFIG_NLS_CODEPAGE_932=m
++CONFIG_NLS_CODEPAGE_949=m
++CONFIG_NLS_CODEPAGE_874=m
++CONFIG_NLS_ISO8859_8=m
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_ISO8859_2=m
++CONFIG_NLS_ISO8859_3=m
++CONFIG_NLS_ISO8859_4=m
++CONFIG_NLS_ISO8859_5=m
++CONFIG_NLS_ISO8859_6=m
++CONFIG_NLS_ISO8859_7=m
++CONFIG_NLS_ISO8859_9=m
++CONFIG_NLS_ISO8859_13=m
++CONFIG_NLS_ISO8859_14=m
++CONFIG_NLS_ISO8859_15=m
++CONFIG_NLS_KOI8_R=m
++CONFIG_NLS_KOI8_U=m
++CONFIG_NLS_UTF8=m
++CONFIG_DLM=m
++CONFIG_DLM_DEBUG=y
++CONFIG_DYNAMIC_DEBUG=y
++CONFIG_DEBUG_INFO=y
++CONFIG_DEBUG_INFO_REDUCED=y
++# CONFIG_ENABLE_WARN_DEPRECATED is not set
++CONFIG_STRIP_ASM_SYMS=y
++CONFIG_DEBUG_FS=y
++CONFIG_HEADERS_CHECK=y
++# CONFIG_FRAME_POINTER is not set
++CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
++CONFIG_DEBUG_VM=y
++CONFIG_DEBUG_MEMORY_INIT=y
++CONFIG_DEBUG_STACKOVERFLOW=y
++CONFIG_LOCKUP_DETECTOR=y
++CONFIG_SCHEDSTATS=y
++CONFIG_TIMER_STATS=y
++CONFIG_DEBUG_LIST=y
++CONFIG_DEBUG_CREDENTIALS=y
++CONFIG_RCU_CPU_STALL_TIMEOUT=60
++CONFIG_ASYNC_RAID6_TEST=m
++CONFIG_KGDB=y
++CONFIG_SECURITY=y
++CONFIG_SECURITYFS=y
++CONFIG_SECURITY_NETWORK=y
++CONFIG_SECURITY_NETWORK_XFRM=y
++CONFIG_SECURITY_SELINUX=y
++CONFIG_SECURITY_SELINUX_BOOTPARAM=y
++CONFIG_SECURITY_SELINUX_DISABLE=y
++CONFIG_CRYPTO_PCRYPT=m
++CONFIG_CRYPTO_CRYPTD=m
++CONFIG_CRYPTO_TEST=m
++CONFIG_CRYPTO_CCM=m
++CONFIG_CRYPTO_GCM=m
++CONFIG_CRYPTO_CTS=m
++CONFIG_CRYPTO_LRW=m
++CONFIG_CRYPTO_PCBC=m
++CONFIG_CRYPTO_XTS=m
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_XCBC=m
++CONFIG_CRYPTO_VMAC=m
++CONFIG_CRYPTO_MICHAEL_MIC=m
++CONFIG_CRYPTO_RMD128=m
++CONFIG_CRYPTO_RMD160=m
++CONFIG_CRYPTO_RMD256=m
++CONFIG_CRYPTO_RMD320=m
++CONFIG_CRYPTO_SHA1=y
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_WP512=m
++CONFIG_CRYPTO_ANUBIS=m
++CONFIG_CRYPTO_BLOWFISH=m
++CONFIG_CRYPTO_CAMELLIA=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_CAST6=m
++CONFIG_CRYPTO_FCRYPT=m
++CONFIG_CRYPTO_KHAZAD=m
++CONFIG_CRYPTO_SEED=m
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_TWOFISH=m
++CONFIG_CRYPTO_LZO=m
+diff --git a/arch/tile/configs/tilepro_defconfig b/arch/tile/configs/tilepro_defconfig
+new file mode 100644
+index 000000000000..e8c4003cbd81
+--- /dev/null
++++ b/arch/tile/configs/tilepro_defconfig
+@@ -0,0 +1,524 @@
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_AUDIT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++CONFIG_TASKSTATS=y
++CONFIG_TASK_DELAY_ACCT=y
++CONFIG_TASK_XACCT=y
++CONFIG_TASK_IO_ACCOUNTING=y
++CONFIG_LOG_BUF_SHIFT=19
++CONFIG_CGROUPS=y
++CONFIG_CGROUP_DEBUG=y
++CONFIG_CGROUP_DEVICE=y
++CONFIG_CPUSETS=y
++CONFIG_CGROUP_CPUACCT=y
++CONFIG_CGROUP_SCHED=y
++CONFIG_RT_GROUP_SCHED=y
++CONFIG_BLK_CGROUP=y
++CONFIG_NAMESPACES=y
++CONFIG_RELAY=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_RD_XZ=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_EMBEDDED=y
++# CONFIG_COMPAT_BRK is not set
++CONFIG_PROFILING=y
++CONFIG_MODULES=y
++CONFIG_MODULE_FORCE_LOAD=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_BLK_DEV_INTEGRITY=y
++CONFIG_PARTITION_ADVANCED=y
++CONFIG_OSF_PARTITION=y
++CONFIG_AMIGA_PARTITION=y
++CONFIG_MAC_PARTITION=y
++CONFIG_BSD_DISKLABEL=y
++CONFIG_MINIX_SUBPARTITION=y
++CONFIG_SOLARIS_X86_PARTITION=y
++CONFIG_UNIXWARE_DISKLABEL=y
++CONFIG_SGI_PARTITION=y
++CONFIG_SUN_PARTITION=y
++CONFIG_KARMA_PARTITION=y
++CONFIG_CFQ_GROUP_IOSCHED=y
++CONFIG_HZ_100=y
++# CONFIG_COMPACTION is not set
++CONFIG_PREEMPT=y
++CONFIG_PCI_DEBUG=y
++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
++CONFIG_BINFMT_MISC=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_XFRM_USER=y
++CONFIG_XFRM_SUB_POLICY=y
++CONFIG_XFRM_STATISTICS=y
++CONFIG_NET_KEY=m
++CONFIG_NET_KEY_MIGRATE=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_IP_MULTIPLE_TABLES=y
++CONFIG_IP_ROUTE_MULTIPATH=y
++CONFIG_IP_ROUTE_VERBOSE=y
++CONFIG_NET_IPIP=m
++CONFIG_IP_MROUTE=y
++CONFIG_IP_PIMSM_V1=y
++CONFIG_IP_PIMSM_V2=y
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++CONFIG_INET_IPCOMP=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++CONFIG_INET_DIAG=m
++CONFIG_TCP_CONG_ADVANCED=y
++CONFIG_TCP_CONG_HSTCP=m
++CONFIG_TCP_CONG_HYBLA=m
++CONFIG_TCP_CONG_SCALABLE=m
++CONFIG_TCP_CONG_LP=m
++CONFIG_TCP_CONG_VENO=m
++CONFIG_TCP_CONG_YEAH=m
++CONFIG_TCP_CONG_ILLINOIS=m
++CONFIG_TCP_MD5SIG=y
++CONFIG_IPV6=y
++CONFIG_IPV6_ROUTER_PREF=y
++CONFIG_IPV6_ROUTE_INFO=y
++CONFIG_IPV6_OPTIMISTIC_DAD=y
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++CONFIG_IPV6_MIP6=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_TUNNEL=m
++CONFIG_IPV6_MULTIPLE_TABLES=y
++CONFIG_IPV6_MROUTE=y
++CONFIG_IPV6_PIMSM_V2=y
++CONFIG_NETLABEL=y
++CONFIG_NETFILTER=y
++CONFIG_NF_CONNTRACK=m
++CONFIG_NF_CONNTRACK_SECMARK=y
++CONFIG_NF_CONNTRACK_ZONES=y
++CONFIG_NF_CONNTRACK_EVENTS=y
++CONFIG_NF_CT_PROTO_DCCP=m
++CONFIG_NF_CT_PROTO_UDPLITE=m
++CONFIG_NF_CONNTRACK_AMANDA=m
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_H323=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NF_CONNTRACK_NETBIOS_NS=m
++CONFIG_NF_CONNTRACK_PPTP=m
++CONFIG_NF_CONNTRACK_SANE=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CONNTRACK_TFTP=m
++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
++CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
++CONFIG_NETFILTER_XT_TARGET_DSCP=m
++CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
++CONFIG_NETFILTER_XT_TARGET_MARK=m
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
++CONFIG_NETFILTER_XT_TARGET_TEE=m
++CONFIG_NETFILTER_XT_TARGET_TPROXY=m
++CONFIG_NETFILTER_XT_TARGET_TRACE=m
++CONFIG_NETFILTER_XT_TARGET_SECMARK=m
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
++CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
++CONFIG_NETFILTER_XT_MATCH_COMMENT=m
++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_DCCP=m
++CONFIG_NETFILTER_XT_MATCH_DSCP=m
++CONFIG_NETFILTER_XT_MATCH_ESP=m
++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_HELPER=m
++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
++CONFIG_NETFILTER_XT_MATCH_IPVS=m
++CONFIG_NETFILTER_XT_MATCH_LENGTH=m
++CONFIG_NETFILTER_XT_MATCH_LIMIT=m
++CONFIG_NETFILTER_XT_MATCH_MAC=m
++CONFIG_NETFILTER_XT_MATCH_MARK=m
++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++CONFIG_NETFILTER_XT_MATCH_OSF=m
++CONFIG_NETFILTER_XT_MATCH_OWNER=m
++CONFIG_NETFILTER_XT_MATCH_POLICY=m
++CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
++CONFIG_NETFILTER_XT_MATCH_QUOTA=m
++CONFIG_NETFILTER_XT_MATCH_RATEEST=m
++CONFIG_NETFILTER_XT_MATCH_REALM=m
++CONFIG_NETFILTER_XT_MATCH_RECENT=m
++CONFIG_NETFILTER_XT_MATCH_SOCKET=m
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
++CONFIG_NETFILTER_XT_MATCH_STRING=m
++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_TIME=m
++CONFIG_NETFILTER_XT_MATCH_U32=m
++CONFIG_IP_VS=m
++CONFIG_IP_VS_IPV6=y
++CONFIG_IP_VS_PROTO_TCP=y
++CONFIG_IP_VS_PROTO_UDP=y
++CONFIG_IP_VS_PROTO_ESP=y
++CONFIG_IP_VS_PROTO_AH=y
++CONFIG_IP_VS_PROTO_SCTP=y
++CONFIG_IP_VS_RR=m
++CONFIG_IP_VS_WRR=m
++CONFIG_IP_VS_LC=m
++CONFIG_IP_VS_WLC=m
++CONFIG_IP_VS_LBLC=m
++CONFIG_IP_VS_LBLCR=m
++CONFIG_IP_VS_SED=m
++CONFIG_IP_VS_NQ=m
++CONFIG_NF_CONNTRACK_IPV4=m
++# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
++CONFIG_IP_NF_IPTABLES=y
++CONFIG_IP_NF_MATCH_AH=m
++CONFIG_IP_NF_MATCH_ECN=m
++CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_FILTER=y
++CONFIG_IP_NF_TARGET_REJECT=y
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_ECN=m
++CONFIG_IP_NF_TARGET_TTL=m
++CONFIG_IP_NF_RAW=m
++CONFIG_IP_NF_SECURITY=m
++CONFIG_IP_NF_ARPTABLES=m
++CONFIG_IP_NF_ARPFILTER=m
++CONFIG_IP_NF_ARP_MANGLE=m
++CONFIG_NF_CONNTRACK_IPV6=m
++CONFIG_IP6_NF_MATCH_AH=m
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_HL=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_MATCH_MH=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_TARGET_HL=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_REJECT=m
++CONFIG_IP6_NF_MANGLE=m
++CONFIG_IP6_NF_RAW=m
++CONFIG_IP6_NF_SECURITY=m
++CONFIG_BRIDGE_NF_EBTABLES=m
++CONFIG_BRIDGE_EBT_BROUTE=m
++CONFIG_BRIDGE_EBT_T_FILTER=m
++CONFIG_BRIDGE_EBT_T_NAT=m
++CONFIG_BRIDGE_EBT_802_3=m
++CONFIG_BRIDGE_EBT_AMONG=m
++CONFIG_BRIDGE_EBT_ARP=m
++CONFIG_BRIDGE_EBT_IP=m
++CONFIG_BRIDGE_EBT_IP6=m
++CONFIG_BRIDGE_EBT_LIMIT=m
++CONFIG_BRIDGE_EBT_MARK=m
++CONFIG_BRIDGE_EBT_PKTTYPE=m
++CONFIG_BRIDGE_EBT_STP=m
++CONFIG_BRIDGE_EBT_VLAN=m
++CONFIG_BRIDGE_EBT_ARPREPLY=m
++CONFIG_BRIDGE_EBT_DNAT=m
++CONFIG_BRIDGE_EBT_MARK_T=m
++CONFIG_BRIDGE_EBT_REDIRECT=m
++CONFIG_BRIDGE_EBT_SNAT=m
++CONFIG_BRIDGE_EBT_LOG=m
++CONFIG_BRIDGE_EBT_ULOG=m
++CONFIG_BRIDGE_EBT_NFLOG=m
++CONFIG_RDS=m
++CONFIG_RDS_TCP=m
++CONFIG_BRIDGE=m
++CONFIG_VLAN_8021Q=m
++CONFIG_VLAN_8021Q_GVRP=y
++CONFIG_PHONET=m
++CONFIG_NET_SCHED=y
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++CONFIG_NET_SCH_PRIO=m
++CONFIG_NET_SCH_MULTIQ=m
++CONFIG_NET_SCH_RED=m
++CONFIG_NET_SCH_SFQ=m
++CONFIG_NET_SCH_TEQL=m
++CONFIG_NET_SCH_TBF=m
++CONFIG_NET_SCH_GRED=m
++CONFIG_NET_SCH_DSMARK=m
++CONFIG_NET_SCH_NETEM=m
++CONFIG_NET_SCH_DRR=m
++CONFIG_NET_SCH_INGRESS=m
++CONFIG_NET_CLS_BASIC=m
++CONFIG_NET_CLS_TCINDEX=m
++CONFIG_NET_CLS_ROUTE4=m
++CONFIG_NET_CLS_FW=m
++CONFIG_NET_CLS_U32=m
++CONFIG_CLS_U32_PERF=y
++CONFIG_CLS_U32_MARK=y
++CONFIG_NET_CLS_RSVP=m
++CONFIG_NET_CLS_RSVP6=m
++CONFIG_NET_CLS_FLOW=m
++CONFIG_NET_CLS_CGROUP=y
++CONFIG_NET_EMATCH=y
++CONFIG_NET_EMATCH_CMP=m
++CONFIG_NET_EMATCH_NBYTE=m
++CONFIG_NET_EMATCH_U32=m
++CONFIG_NET_EMATCH_META=m
++CONFIG_NET_EMATCH_TEXT=m
++CONFIG_NET_CLS_ACT=y
++CONFIG_NET_ACT_POLICE=m
++CONFIG_NET_ACT_GACT=m
++CONFIG_GACT_PROB=y
++CONFIG_NET_ACT_MIRRED=m
++CONFIG_NET_ACT_IPT=m
++CONFIG_NET_ACT_NAT=m
++CONFIG_NET_ACT_PEDIT=m
++CONFIG_NET_ACT_SIMP=m
++CONFIG_NET_ACT_SKBEDIT=m
++CONFIG_NET_CLS_IND=y
++CONFIG_DCB=y
++CONFIG_DNS_RESOLVER=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_CONNECTOR=y
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++CONFIG_BLK_DEV_SX8=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_SIZE=16384
++CONFIG_ATA_OVER_ETH=m
++CONFIG_RAID_ATTRS=m
++CONFIG_BLK_DEV_SD=y
++CONFIG_SCSI_CONSTANTS=y
++CONFIG_SCSI_LOGGING=y
++CONFIG_ATA=y
++CONFIG_SATA_SIL24=y
++# CONFIG_ATA_SFF is not set
++CONFIG_MD=y
++CONFIG_BLK_DEV_MD=y
++CONFIG_MD_LINEAR=m
++CONFIG_MD_RAID0=m
++CONFIG_MD_RAID1=m
++CONFIG_MD_RAID10=m
++CONFIG_MD_RAID456=m
++CONFIG_MD_FAULTY=m
++CONFIG_BLK_DEV_DM=m
++CONFIG_DM_DEBUG=y
++CONFIG_DM_CRYPT=m
++CONFIG_DM_SNAPSHOT=m
++CONFIG_DM_MIRROR=m
++CONFIG_DM_LOG_USERSPACE=m
++CONFIG_DM_ZERO=m
++CONFIG_DM_MULTIPATH=m
++CONFIG_DM_MULTIPATH_QL=m
++CONFIG_DM_MULTIPATH_ST=m
++CONFIG_DM_DELAY=m
++CONFIG_DM_UEVENT=y
++CONFIG_FUSION=y
++CONFIG_FUSION_SAS=y
++CONFIG_NETDEVICES=y
++CONFIG_BONDING=m
++CONFIG_DUMMY=m
++CONFIG_IFB=m
++CONFIG_MACVLAN=m
++CONFIG_MACVTAP=m
++CONFIG_NETCONSOLE=m
++CONFIG_NETCONSOLE_DYNAMIC=y
++CONFIG_TUN=y
++CONFIG_VETH=m
++CONFIG_NET_DSA_MV88E6060=y
++CONFIG_NET_DSA_MV88E6XXX=y
++# CONFIG_NET_VENDOR_3COM is not set
++CONFIG_E1000E=y
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_HW_RANDOM=y
++CONFIG_HW_RANDOM_TIMERIOMEM=m
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++# CONFIG_VGA_ARB is not set
++# CONFIG_USB_SUPPORT is not set
++CONFIG_EDAC=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_TILE=y
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++CONFIG_EXT2_FS_POSIX_ACL=y
++CONFIG_EXT2_FS_SECURITY=y
++CONFIG_EXT2_FS_XIP=y
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_POSIX_ACL=y
++CONFIG_EXT3_FS_SECURITY=y
++CONFIG_EXT4_FS=y
++CONFIG_EXT4_FS_POSIX_ACL=y
++CONFIG_EXT4_FS_SECURITY=y
++CONFIG_XFS_FS=y
++CONFIG_XFS_QUOTA=y
++CONFIG_XFS_POSIX_ACL=y
++CONFIG_GFS2_FS=m
++CONFIG_GFS2_FS_LOCKING_DLM=y
++CONFIG_BTRFS_FS=m
++CONFIG_BTRFS_FS_POSIX_ACL=y
++CONFIG_QUOTA=y
++CONFIG_QUOTA_NETLINK_INTERFACE=y
++# CONFIG_PRINT_QUOTA_WARNING is not set
++CONFIG_QFMT_V2=y
++CONFIG_AUTOFS4_FS=m
++CONFIG_FUSE_FS=y
++CONFIG_CUSE=m
++CONFIG_FSCACHE=m
++CONFIG_FSCACHE_STATS=y
++CONFIG_CACHEFILES=m
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_UDF_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
++CONFIG_PROC_KCORE=y
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++CONFIG_HUGETLBFS=y
++CONFIG_CONFIGFS_FS=m
++CONFIG_ECRYPT_FS=m
++CONFIG_CRAMFS=m
++CONFIG_SQUASHFS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=m
++CONFIG_NFS_V4_1=y
++CONFIG_NFS_FSCACHE=y
++CONFIG_NFSD=m
++CONFIG_NFSD_V3_ACL=y
++CONFIG_NFSD_V4=y
++CONFIG_CIFS=m
++CONFIG_CIFS_STATS=y
++CONFIG_CIFS_WEAK_PW_HASH=y
++CONFIG_CIFS_UPCALL=y
++CONFIG_CIFS_XATTR=y
++CONFIG_CIFS_POSIX=y
++CONFIG_CIFS_DFS_UPCALL=y
++CONFIG_CIFS_FSCACHE=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="utf8"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=m
++CONFIG_NLS_CODEPAGE_775=m
++CONFIG_NLS_CODEPAGE_850=m
++CONFIG_NLS_CODEPAGE_852=m
++CONFIG_NLS_CODEPAGE_855=m
++CONFIG_NLS_CODEPAGE_857=m
++CONFIG_NLS_CODEPAGE_860=m
++CONFIG_NLS_CODEPAGE_861=m
++CONFIG_NLS_CODEPAGE_862=m
++CONFIG_NLS_CODEPAGE_863=m
++CONFIG_NLS_CODEPAGE_864=m
++CONFIG_NLS_CODEPAGE_865=m
++CONFIG_NLS_CODEPAGE_866=m
++CONFIG_NLS_CODEPAGE_869=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++CONFIG_NLS_CODEPAGE_932=m
++CONFIG_NLS_CODEPAGE_949=m
++CONFIG_NLS_CODEPAGE_874=m
++CONFIG_NLS_ISO8859_8=m
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_ISO8859_2=m
++CONFIG_NLS_ISO8859_3=m
++CONFIG_NLS_ISO8859_4=m
++CONFIG_NLS_ISO8859_5=m
++CONFIG_NLS_ISO8859_6=m
++CONFIG_NLS_ISO8859_7=m
++CONFIG_NLS_ISO8859_9=m
++CONFIG_NLS_ISO8859_13=m
++CONFIG_NLS_ISO8859_14=m
++CONFIG_NLS_ISO8859_15=m
++CONFIG_NLS_KOI8_R=m
++CONFIG_NLS_KOI8_U=m
++CONFIG_NLS_UTF8=m
++CONFIG_DLM=m
++CONFIG_DLM_DEBUG=y
++CONFIG_DYNAMIC_DEBUG=y
++CONFIG_DEBUG_INFO=y
++CONFIG_DEBUG_INFO_REDUCED=y
++# CONFIG_ENABLE_WARN_DEPRECATED is not set
++CONFIG_FRAME_WARN=2048
++CONFIG_STRIP_ASM_SYMS=y
++CONFIG_DEBUG_FS=y
++CONFIG_HEADERS_CHECK=y
++# CONFIG_FRAME_POINTER is not set
++CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
++CONFIG_MAGIC_SYSRQ=y
++CONFIG_DEBUG_VM=y
++CONFIG_DEBUG_MEMORY_INIT=y
++CONFIG_DEBUG_STACKOVERFLOW=y
++CONFIG_LOCKUP_DETECTOR=y
++CONFIG_SCHEDSTATS=y
++CONFIG_TIMER_STATS=y
++CONFIG_DEBUG_LIST=y
++CONFIG_DEBUG_CREDENTIALS=y
++CONFIG_RCU_CPU_STALL_TIMEOUT=60
++CONFIG_ASYNC_RAID6_TEST=m
++CONFIG_SECURITY=y
++CONFIG_SECURITYFS=y
++CONFIG_SECURITY_NETWORK=y
++CONFIG_SECURITY_NETWORK_XFRM=y
++CONFIG_SECURITY_SELINUX=y
++CONFIG_SECURITY_SELINUX_BOOTPARAM=y
++CONFIG_SECURITY_SELINUX_DISABLE=y
++CONFIG_CRYPTO_PCRYPT=m
++CONFIG_CRYPTO_CRYPTD=m
++CONFIG_CRYPTO_TEST=m
++CONFIG_CRYPTO_CCM=m
++CONFIG_CRYPTO_GCM=m
++CONFIG_CRYPTO_CTS=m
++CONFIG_CRYPTO_LRW=m
++CONFIG_CRYPTO_PCBC=m
++CONFIG_CRYPTO_XTS=m
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_XCBC=m
++CONFIG_CRYPTO_VMAC=m
++CONFIG_CRYPTO_MICHAEL_MIC=m
++CONFIG_CRYPTO_RMD128=m
++CONFIG_CRYPTO_RMD160=m
++CONFIG_CRYPTO_RMD256=m
++CONFIG_CRYPTO_RMD320=m
++CONFIG_CRYPTO_SHA1=y
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_WP512=m
++CONFIG_CRYPTO_ANUBIS=m
++CONFIG_CRYPTO_BLOWFISH=m
++CONFIG_CRYPTO_CAMELLIA=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_CAST6=m
++CONFIG_CRYPTO_FCRYPT=m
++CONFIG_CRYPTO_KHAZAD=m
++CONFIG_CRYPTO_SEED=m
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_TWOFISH=m
++CONFIG_CRYPTO_LZO=m
++CONFIG_CRC_CCITT=m
++CONFIG_CRC7=m
+diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
+index 9f908112bbb9..25452ca053b8 100644
+--- a/arch/x86/configs/i386_defconfig
++++ b/arch/x86/configs/i386_defconfig
+@@ -41,7 +41,7 @@ CONFIG_SMP=y
+ CONFIG_X86_GENERIC=y
+ CONFIG_HPET_TIMER=y
+ CONFIG_SCHED_SMT=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+ CONFIG_X86_MCE=y
+ CONFIG_X86_REBOOTFIXUPS=y
+diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
+index 1d3badfda09e..235b63cb08fa 100644
+--- a/arch/x86/configs/x86_64_defconfig
++++ b/arch/x86/configs/x86_64_defconfig
+@@ -40,7 +40,7 @@ CONFIG_SMP=y
+ CONFIG_CALGARY_IOMMU=y
+ CONFIG_NR_CPUS=64
+ CONFIG_SCHED_SMT=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+ CONFIG_X86_MCE=y
+ CONFIG_MICROCODE=y
+diff --git a/kernel/Kconfig.preempt b/kernel/Kconfig.preempt
+index 0fee5fe6c899..9cf10230d5fb 100644
+--- a/kernel/Kconfig.preempt
++++ b/kernel/Kconfig.preempt
+@@ -1,7 +1,7 @@
+
+ choice
+ prompt "Preemption Model"
+- default PREEMPT_NONE
++ default PREEMPT
+
+ config PREEMPT_NONE
+ bool "No Forced Preemption (Server)"
+@@ -17,7 +17,7 @@ config PREEMPT_NONE
+ latencies.
+
+ config PREEMPT_VOLUNTARY
+- bool "Voluntary Kernel Preemption (Desktop)"
++ bool "Voluntary Kernel Preemption (Nothing)"
+ depends on !ARCH_NO_PREEMPT
+ help
+ This option reduces the latency of the kernel by adding more
+@@ -32,7 +32,8 @@ config PREEMPT_VOLUNTARY
+ applications to run more 'smoothly' even when the system is
+ under load.
+
+- Select this if you are building a kernel for a desktop system.
++ Select this for no system in particular (choose Preemptible
++ instead on a desktop if you know what's good for you).
+
+ config PREEMPT
+ bool "Preemptible Kernel (Low-Latency Desktop)"
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-0004-Expose-vmsplit-for-our-poor-32-bit-users.patch b/sys-kernel/linux-sources-redcore/files/5.1-0004-Expose-vmsplit-for-our-poor-32-bit-users.patch
new file mode 100644
index 00000000..fd180743
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-0004-Expose-vmsplit-for-our-poor-32-bit-users.patch
@@ -0,0 +1,48 @@
+From 2dd86e6f35c475b4b42b0b96a0b47a39a630736e Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Fri, 12 May 2017 13:07:37 +1000
+Subject: [PATCH 04/16] Expose vmsplit for our poor 32 bit users.
+
+---
+ arch/x86/Kconfig | 12 ++++++------
+ 1 file changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
+index fe5df269452d..29ecd7d99cfc 100644
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -1426,7 +1426,7 @@ config HIGHMEM64G
+ endchoice
+
+ choice
+- prompt "Memory split" if EXPERT
++ prompt "Memory split"
+ default VMSPLIT_3G
+ depends on X86_32
+ ---help---
+@@ -1446,17 +1446,17 @@ choice
+ option alone!
+
+ config VMSPLIT_3G
+- bool "3G/1G user/kernel split"
++ bool "Default 896MB lowmem (3G/1G user/kernel split)"
+ config VMSPLIT_3G_OPT
+ depends on !X86_PAE
+- bool "3G/1G user/kernel split (for full 1G low memory)"
++ bool "1GB lowmem (3G/1G user/kernel split)"
+ config VMSPLIT_2G
+- bool "2G/2G user/kernel split"
++ bool "2GB lowmem (2G/2G user/kernel split)"
+ config VMSPLIT_2G_OPT
+ depends on !X86_PAE
+- bool "2G/2G user/kernel split (for full 2G low memory)"
++ bool "2GB lowmem (2G/2G user/kernel split)"
+ config VMSPLIT_1G
+- bool "1G/3G user/kernel split"
++ bool "3GB lowmem (1G/3G user/kernel split)"
+ endchoice
+
+ config PAGE_OFFSET
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-0005-Create-highres-timeout-variants-of-schedule_timeout-.patch b/sys-kernel/linux-sources-redcore/files/5.1-0005-Create-highres-timeout-variants-of-schedule_timeout-.patch
new file mode 100644
index 00000000..5c7831cb
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-0005-Create-highres-timeout-variants-of-schedule_timeout-.patch
@@ -0,0 +1,153 @@
+From 35c6a7df0bc36fdf3cb8e14c0ba8c73b6b17dded Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Sat, 12 Aug 2017 11:53:39 +1000
+Subject: [PATCH 05/16] Create highres timeout variants of schedule_timeout
+ functions.
+
+---
+ include/linux/freezer.h | 1 +
+ include/linux/sched.h | 31 ++++++++++++++++--
+ kernel/time/hrtimer.c | 71 +++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 101 insertions(+), 2 deletions(-)
+
+diff --git a/include/linux/freezer.h b/include/linux/freezer.h
+index 21f5aa0b217f..ee9b46394fdf 100644
+--- a/include/linux/freezer.h
++++ b/include/linux/freezer.h
+@@ -297,6 +297,7 @@ static inline void set_freezable(void) {}
+ #define wait_event_freezekillable_unsafe(wq, condition) \
+ wait_event_killable(wq, condition)
+
++#define pm_freezing (false)
+ #endif /* !CONFIG_FREEZER */
+
+ #endif /* FREEZER_H_INCLUDED */
+diff --git a/include/linux/sched.h b/include/linux/sched.h
+index 71d849ef5ee2..14ab8a8f8b1c 100644
+--- a/include/linux/sched.h
++++ b/include/linux/sched.h
+@@ -214,13 +214,40 @@ struct task_group;
+
+ extern void scheduler_tick(void);
+
+-#define MAX_SCHEDULE_TIMEOUT LONG_MAX
+-
++#define MAX_SCHEDULE_TIMEOUT LONG_MAX
+ extern long schedule_timeout(long timeout);
+ extern long schedule_timeout_interruptible(long timeout);
+ extern long schedule_timeout_killable(long timeout);
+ extern long schedule_timeout_uninterruptible(long timeout);
+ extern long schedule_timeout_idle(long timeout);
++
++#ifdef CONFIG_HIGH_RES_TIMERS
++extern long schedule_msec_hrtimeout(long timeout);
++extern long schedule_min_hrtimeout(void);
++extern long schedule_msec_hrtimeout_interruptible(long timeout);
++extern long schedule_msec_hrtimeout_uninterruptible(long timeout);
++#else
++static inline long schedule_msec_hrtimeout(long timeout)
++{
++ return schedule_timeout(msecs_to_jiffies(timeout));
++}
++
++static inline long schedule_min_hrtimeout(void)
++{
++ return schedule_timeout(1);
++}
++
++static inline long schedule_msec_hrtimeout_interruptible(long timeout)
++{
++ return schedule_timeout_interruptible(msecs_to_jiffies(timeout));
++}
++
++static inline long schedule_msec_hrtimeout_uninterruptible(long timeout)
++{
++ return schedule_timeout_uninterruptible(msecs_to_jiffies(timeout));
++}
++#endif
++
+ asmlinkage void schedule(void);
+ extern void schedule_preempt_disabled(void);
+
+diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c
+index 41dfff23c1f9..c6ea49693bca 100644
+--- a/kernel/time/hrtimer.c
++++ b/kernel/time/hrtimer.c
+@@ -2017,3 +2017,74 @@ int __sched schedule_hrtimeout(ktime_t *expires,
+ return schedule_hrtimeout_range(expires, 0, mode);
+ }
+ EXPORT_SYMBOL_GPL(schedule_hrtimeout);
++
++/*
++ * As per schedule_hrtimeout but taskes a millisecond value and returns how
++ * many milliseconds are left.
++ */
++long __sched schedule_msec_hrtimeout(long timeout)
++{
++ struct hrtimer_sleeper t;
++ int delta, secs, jiffs;
++ ktime_t expires;
++
++ if (!timeout) {
++ __set_current_state(TASK_RUNNING);
++ return 0;
++ }
++
++ jiffs = msecs_to_jiffies(timeout);
++ /*
++ * If regular timer resolution is adequate or hrtimer resolution is not
++ * (yet) better than Hz, as would occur during startup, use regular
++ * timers.
++ */
++ if (jiffs > 4 || hrtimer_resolution >= NSEC_PER_SEC / HZ)
++ return schedule_timeout(jiffs);
++
++ secs = timeout / 1000;
++ delta = (timeout % 1000) * NSEC_PER_MSEC;
++ expires = ktime_set(secs, delta);
++
++ hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
++ hrtimer_set_expires_range_ns(&t.timer, expires, delta);
++
++ hrtimer_init_sleeper(&t, current);
++
++ hrtimer_start_expires(&t.timer, HRTIMER_MODE_REL);
++
++ if (likely(t.task))
++ schedule();
++
++ hrtimer_cancel(&t.timer);
++ destroy_hrtimer_on_stack(&t.timer);
++
++ __set_current_state(TASK_RUNNING);
++
++ expires = hrtimer_expires_remaining(&t.timer);
++ timeout = ktime_to_ms(expires);
++ return timeout < 0 ? 0 : timeout;
++}
++
++EXPORT_SYMBOL(schedule_msec_hrtimeout);
++
++long __sched schedule_min_hrtimeout(void)
++{
++ return schedule_msec_hrtimeout(1);
++}
++
++EXPORT_SYMBOL(schedule_min_hrtimeout);
++
++long __sched schedule_msec_hrtimeout_interruptible(long timeout)
++{
++ __set_current_state(TASK_INTERRUPTIBLE);
++ return schedule_msec_hrtimeout(timeout);
++}
++EXPORT_SYMBOL(schedule_msec_hrtimeout_interruptible);
++
++long __sched schedule_msec_hrtimeout_uninterruptible(long timeout)
++{
++ __set_current_state(TASK_UNINTERRUPTIBLE);
++ return schedule_msec_hrtimeout(timeout);
++}
++EXPORT_SYMBOL(schedule_msec_hrtimeout_uninterruptible);
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-0006-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch b/sys-kernel/linux-sources-redcore/files/5.1-0006-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch
new file mode 100644
index 00000000..4c5c24e7
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-0006-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch
@@ -0,0 +1,49 @@
+From cda5868e93585d3751bcb991e00735502cba2566 Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Sat, 5 Nov 2016 09:27:36 +1100
+Subject: [PATCH 06/16] Special case calls of schedule_timeout(1) to use the
+ min hrtimeout of 1ms, working around low Hz resolutions.
+
+---
+ kernel/time/timer.c | 16 ++++++++++++++--
+ 1 file changed, 14 insertions(+), 2 deletions(-)
+
+diff --git a/kernel/time/timer.c b/kernel/time/timer.c
+index 926ab73595a2..98803a47491c 100644
+--- a/kernel/time/timer.c
++++ b/kernel/time/timer.c
+@@ -1800,6 +1800,18 @@ signed long __sched schedule_timeout(signed long timeout)
+
+ expire = timeout + jiffies;
+
++#ifdef CONFIG_HIGH_RES_TIMERS
++ if (timeout == 1 && hrtimer_resolution < NSEC_PER_SEC / HZ) {
++ /*
++ * Special case 1 as being a request for the minimum timeout
++ * and use highres timers to timeout after 1ms to workaround
++ * the granularity of low Hz tick timers.
++ */
++ if (!schedule_min_hrtimeout())
++ return 0;
++ goto out_timeout;
++ }
++#endif
+ timer.task = current;
+ timer_setup_on_stack(&timer.timer, process_timeout, 0);
+ __mod_timer(&timer.timer, expire, 0);
+@@ -1808,10 +1820,10 @@ signed long __sched schedule_timeout(signed long timeout)
+
+ /* Remove the timer from the object tracker */
+ destroy_timer_on_stack(&timer.timer);
+-
++out_timeout:
+ timeout = expire - jiffies;
+
+- out:
++out:
+ return timeout < 0 ? 0 : timeout;
+ }
+ EXPORT_SYMBOL(schedule_timeout);
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-0007-Convert-msleep-to-use-hrtimers-when-active.patch b/sys-kernel/linux-sources-redcore/files/5.1-0007-Convert-msleep-to-use-hrtimers-when-active.patch
new file mode 100644
index 00000000..9dead86e
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-0007-Convert-msleep-to-use-hrtimers-when-active.patch
@@ -0,0 +1,54 @@
+From b713b0c571fa869fec376742be0e9c217ab38dab Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Fri, 4 Nov 2016 09:25:54 +1100
+Subject: [PATCH 07/16] Convert msleep to use hrtimers when active.
+
+---
+ kernel/time/timer.c | 24 ++++++++++++++++++++++--
+ 1 file changed, 22 insertions(+), 2 deletions(-)
+
+diff --git a/kernel/time/timer.c b/kernel/time/timer.c
+index 98803a47491c..3ab277ba0f44 100644
+--- a/kernel/time/timer.c
++++ b/kernel/time/timer.c
+@@ -1964,7 +1964,19 @@ void __init init_timers(void)
+ */
+ void msleep(unsigned int msecs)
+ {
+- unsigned long timeout = msecs_to_jiffies(msecs) + 1;
++ int jiffs = msecs_to_jiffies(msecs);
++ unsigned long timeout;
++
++ /*
++ * Use high resolution timers where the resolution of tick based
++ * timers is inadequate.
++ */
++ if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ) {
++ while (msecs)
++ msecs = schedule_msec_hrtimeout_uninterruptible(msecs);
++ return;
++ }
++ timeout = msecs_to_jiffies(msecs) + 1;
+
+ while (timeout)
+ timeout = schedule_timeout_uninterruptible(timeout);
+@@ -1978,7 +1990,15 @@ EXPORT_SYMBOL(msleep);
+ */
+ unsigned long msleep_interruptible(unsigned int msecs)
+ {
+- unsigned long timeout = msecs_to_jiffies(msecs) + 1;
++ int jiffs = msecs_to_jiffies(msecs);
++ unsigned long timeout;
++
++ if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ) {
++ while (msecs && !signal_pending(current))
++ msecs = schedule_msec_hrtimeout_interruptible(msecs);
++ return msecs;
++ }
++ timeout = msecs_to_jiffies(msecs) + 1;
+
+ while (timeout && !signal_pending(current))
+ timeout = schedule_timeout_interruptible(timeout);
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-0008-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch b/sys-kernel/linux-sources-redcore/files/5.1-0008-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch
new file mode 100644
index 00000000..b21caaeb
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-0008-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch
@@ -0,0 +1,995 @@
+From 97bf976c1a61af48431ce97bc129a0f448e8c735 Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Mon, 20 Feb 2017 13:28:30 +1100
+Subject: [PATCH 08/16] Replace all schedule timeout(1) with
+ schedule_min_hrtimeout()
+
+---
+ drivers/block/swim.c | 6 +-
+ drivers/char/ipmi/ipmi_msghandler.c | 2 +-
+ drivers/char/ipmi/ipmi_ssif.c | 2 +-
+ drivers/char/snsc.c | 4 +-
+ drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c | 2 +-
+ drivers/gpu/drm/vmwgfx/vmwgfx_irq.c | 2 +-
+ drivers/media/pci/ivtv/ivtv-ioctl.c | 2 +-
+ drivers/media/pci/ivtv/ivtv-streams.c | 2 +-
+ drivers/mfd/ucb1x00-core.c | 2 +-
+ drivers/misc/sgi-xp/xpc_channel.c | 2 +-
+ drivers/net/caif/caif_hsi.c | 2 +-
+ drivers/net/can/usb/peak_usb/pcan_usb.c | 2 +-
+ drivers/net/usb/lan78xx.c | 2 +-
+ drivers/net/usb/usbnet.c | 2 +-
+ drivers/scsi/fnic/fnic_scsi.c | 4 +-
+ drivers/scsi/snic/snic_scsi.c | 2 +-
+ .../staging/comedi/drivers/ni_mio_common.c | 2 +-
+ drivers/staging/lustre/lnet/lnet/lib-eq.c | 426 ++++++++++++++++++
+ drivers/staging/rts5208/rtsx.c | 2 +-
+ drivers/staging/speakup/speakup_acntpc.c | 4 +-
+ drivers/staging/speakup/speakup_apollo.c | 2 +-
+ drivers/staging/speakup/speakup_decext.c | 2 +-
+ drivers/staging/speakup/speakup_decpc.c | 2 +-
+ drivers/staging/speakup/speakup_dectlk.c | 2 +-
+ drivers/staging/speakup/speakup_dtlk.c | 4 +-
+ drivers/staging/speakup/speakup_keypc.c | 4 +-
+ drivers/staging/speakup/synth.c | 14 +-
+ .../staging/unisys/visornic/visornic_main.c | 6 +-
+ drivers/video/fbdev/omap/hwa742.c | 2 +-
+ drivers/video/fbdev/pxafb.c | 2 +-
+ fs/btrfs/extent-tree.c | 2 +-
+ fs/btrfs/inode-map.c | 2 +-
+ sound/usb/line6/pcm.c | 2 +-
+ 33 files changed, 470 insertions(+), 50 deletions(-)
+ create mode 100644 drivers/staging/lustre/lnet/lnet/lib-eq.c
+
+diff --git a/drivers/block/swim.c b/drivers/block/swim.c
+index 3fa6fcc34790..278486c8266d 100644
+--- a/drivers/block/swim.c
++++ b/drivers/block/swim.c
+@@ -332,7 +332,7 @@ static inline void swim_motor(struct swim __iomem *base,
+ if (swim_readbit(base, MOTOR_ON))
+ break;
+ current->state = TASK_INTERRUPTIBLE;
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ }
+ } else if (action == OFF) {
+ swim_action(base, MOTOR_OFF);
+@@ -351,7 +351,7 @@ static inline void swim_eject(struct swim __iomem *base)
+ if (!swim_readbit(base, DISK_IN))
+ break;
+ current->state = TASK_INTERRUPTIBLE;
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ }
+ swim_select(base, RELAX);
+ }
+@@ -375,7 +375,7 @@ static inline int swim_step(struct swim __iomem *base)
+ for (wait = 0; wait < HZ; wait++) {
+
+ current->state = TASK_INTERRUPTIBLE;
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+
+ swim_select(base, RELAX);
+ if (!swim_readbit(base, STEP))
+diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
+index 00bf4b17edbf..71c49540cb25 100644
+--- a/drivers/char/ipmi/ipmi_msghandler.c
++++ b/drivers/char/ipmi/ipmi_msghandler.c
+@@ -3541,7 +3541,7 @@ static void cleanup_smi_msgs(struct ipmi_smi *intf)
+ /* Current message first, to preserve order */
+ while (intf->curr_msg && !list_empty(&intf->waiting_rcv_msgs)) {
+ /* Wait for the message to clear out. */
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ }
+
+ /* No need for locks, the interface is down. */
+diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c
+index 8b5aec5430f1..a5737d29cd93 100644
+--- a/drivers/char/ipmi/ipmi_ssif.c
++++ b/drivers/char/ipmi/ipmi_ssif.c
+@@ -1285,7 +1285,7 @@ static void shutdown_ssif(void *send_info)
+
+ /* make sure the driver is not looking for flags any more. */
+ while (ssif_info->ssif_state != SSIF_NORMAL)
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+
+ ssif_info->stopping = true;
+ del_timer_sync(&ssif_info->watch_timer);
+diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c
+index 5918ea7499bb..5228e78df804 100644
+--- a/drivers/char/snsc.c
++++ b/drivers/char/snsc.c
+@@ -198,7 +198,7 @@ scdrv_read(struct file *file, char __user *buf, size_t count, loff_t *f_pos)
+ add_wait_queue(&sd->sd_rq, &wait);
+ spin_unlock_irqrestore(&sd->sd_rlock, flags);
+
+- schedule_timeout(msecs_to_jiffies(SCDRV_TIMEOUT));
++ schedule_msec_hrtimeout((SCDRV_TIMEOUT));
+
+ remove_wait_queue(&sd->sd_rq, &wait);
+ if (signal_pending(current)) {
+@@ -294,7 +294,7 @@ scdrv_write(struct file *file, const char __user *buf,
+ add_wait_queue(&sd->sd_wq, &wait);
+ spin_unlock_irqrestore(&sd->sd_wlock, flags);
+
+- schedule_timeout(msecs_to_jiffies(SCDRV_TIMEOUT));
++ schedule_msec_hrtimeout((SCDRV_TIMEOUT));
+
+ remove_wait_queue(&sd->sd_wq, &wait);
+ if (signal_pending(current)) {
+diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
+index d0fd147ef75f..730ae4fe6b85 100644
+--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
++++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
+@@ -235,7 +235,7 @@ static int vmw_fifo_wait_noirq(struct vmw_private *dev_priv,
+ DRM_ERROR("SVGA device lockup.\n");
+ break;
+ }
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ if (interruptible && signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ break;
+diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
+index c3ad4478266b..7e2a29d56459 100644
+--- a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
++++ b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
+@@ -202,7 +202,7 @@ int vmw_fallback_wait(struct vmw_private *dev_priv,
+ break;
+ }
+ if (lazy)
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ else if ((++count & 0x0F) == 0) {
+ /**
+ * FIXME: Use schedule_hr_timeout here for
+diff --git a/drivers/media/pci/ivtv/ivtv-ioctl.c b/drivers/media/pci/ivtv/ivtv-ioctl.c
+index 6c269ecd8d05..69becedee614 100644
+--- a/drivers/media/pci/ivtv/ivtv-ioctl.c
++++ b/drivers/media/pci/ivtv/ivtv-ioctl.c
+@@ -1156,7 +1156,7 @@ void ivtv_s_std_dec(struct ivtv *itv, v4l2_std_id std)
+ TASK_UNINTERRUPTIBLE);
+ if ((read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16) < 100)
+ break;
+- schedule_timeout(msecs_to_jiffies(25));
++ schedule_msec_hrtimeout((25));
+ }
+ finish_wait(&itv->vsync_waitq, &wait);
+ mutex_lock(&itv->serialize_lock);
+diff --git a/drivers/media/pci/ivtv/ivtv-streams.c b/drivers/media/pci/ivtv/ivtv-streams.c
+index a641f20e3f86..e1b40d2b4bed 100644
+--- a/drivers/media/pci/ivtv/ivtv-streams.c
++++ b/drivers/media/pci/ivtv/ivtv-streams.c
+@@ -843,7 +843,7 @@ int ivtv_stop_v4l2_encode_stream(struct ivtv_stream *s, int gop_end)
+ while (!test_bit(IVTV_F_I_EOS, &itv->i_flags) &&
+ time_before(jiffies,
+ then + msecs_to_jiffies(2000))) {
+- schedule_timeout(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout((10));
+ }
+
+ /* To convert jiffies to ms, we must multiply by 1000
+diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
+index d6fb2e1a759a..7ac951b84beb 100644
+--- a/drivers/mfd/ucb1x00-core.c
++++ b/drivers/mfd/ucb1x00-core.c
+@@ -253,7 +253,7 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
+ break;
+ /* yield to other processes */
+ set_current_state(TASK_INTERRUPTIBLE);
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ }
+
+ return UCB_ADC_DAT(val);
+diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
+index 8e6607fc8a67..b9ab770bbdb5 100644
+--- a/drivers/misc/sgi-xp/xpc_channel.c
++++ b/drivers/misc/sgi-xp/xpc_channel.c
+@@ -834,7 +834,7 @@ xpc_allocate_msg_wait(struct xpc_channel *ch)
+
+ atomic_inc(&ch->n_on_msg_allocate_wq);
+ prepare_to_wait(&ch->msg_allocate_wq, &wait, TASK_INTERRUPTIBLE);
+- ret = schedule_timeout(1);
++ ret = schedule_min_hrtimeout();
+ finish_wait(&ch->msg_allocate_wq, &wait);
+ atomic_dec(&ch->n_on_msg_allocate_wq);
+
+diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c
+index 433a14b9f731..4d197a99472b 100644
+--- a/drivers/net/caif/caif_hsi.c
++++ b/drivers/net/caif/caif_hsi.c
+@@ -939,7 +939,7 @@ static void cfhsi_wake_down(struct work_struct *work)
+ break;
+
+ set_current_state(TASK_INTERRUPTIBLE);
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ retry--;
+ }
+
+diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c
+index 13238a72a338..fc51ae55c63f 100644
+--- a/drivers/net/can/usb/peak_usb/pcan_usb.c
++++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
+@@ -250,7 +250,7 @@ static int pcan_usb_write_mode(struct peak_usb_device *dev, u8 onoff)
+ } else {
+ /* the PCAN-USB needs time to init */
+ set_current_state(TASK_INTERRUPTIBLE);
+- schedule_timeout(msecs_to_jiffies(PCAN_USB_STARTUP_TIMEOUT));
++ schedule_msec_hrtimeout((PCAN_USB_STARTUP_TIMEOUT));
+ }
+
+ return err;
+diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
+index 3d92ea6fcc02..de564401fd4d 100644
+--- a/drivers/net/usb/lan78xx.c
++++ b/drivers/net/usb/lan78xx.c
+@@ -2674,7 +2674,7 @@ static void lan78xx_terminate_urbs(struct lan78xx_net *dev)
+ while (!skb_queue_empty(&dev->rxq) &&
+ !skb_queue_empty(&dev->txq) &&
+ !skb_queue_empty(&dev->done)) {
+- schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS));
++ schedule_msec_hrtimeout((UNLINK_TIMEOUT_MS));
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ netif_dbg(dev, ifdown, dev->net,
+ "waited for %d urb completions\n", temp);
+diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
+index 504282af27e5..da60ab9b56c7 100644
+--- a/drivers/net/usb/usbnet.c
++++ b/drivers/net/usb/usbnet.c
+@@ -770,7 +770,7 @@ static void wait_skb_queue_empty(struct sk_buff_head *q)
+ spin_lock_irqsave(&q->lock, flags);
+ while (!skb_queue_empty(q)) {
+ spin_unlock_irqrestore(&q->lock, flags);
+- schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS));
++ schedule_msec_hrtimeout((UNLINK_TIMEOUT_MS));
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ spin_lock_irqsave(&q->lock, flags);
+ }
+diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
+index 80608b53897b..84051b538fa8 100644
+--- a/drivers/scsi/fnic/fnic_scsi.c
++++ b/drivers/scsi/fnic/fnic_scsi.c
+@@ -216,7 +216,7 @@ int fnic_fw_reset_handler(struct fnic *fnic)
+
+ /* wait for io cmpl */
+ while (atomic_read(&fnic->in_flight))
+- schedule_timeout(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout((1));
+
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+@@ -2273,7 +2273,7 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
+ }
+ }
+
+- schedule_timeout(msecs_to_jiffies(2 * fnic->config.ed_tov));
++ schedule_msec_hrtimeout((2 * fnic->config.ed_tov));
+
+ /* walk again to check, if IOs are still pending in fw */
+ if (fnic_is_abts_pending(fnic, lr_sc))
+diff --git a/drivers/scsi/snic/snic_scsi.c b/drivers/scsi/snic/snic_scsi.c
+index b3650c989ed4..7ed1fb285754 100644
+--- a/drivers/scsi/snic/snic_scsi.c
++++ b/drivers/scsi/snic/snic_scsi.c
+@@ -2353,7 +2353,7 @@ snic_reset(struct Scsi_Host *shost, struct scsi_cmnd *sc)
+
+ /* Wait for all the IOs that are entered in Qcmd */
+ while (atomic_read(&snic->ios_inflight))
+- schedule_timeout(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout((1));
+
+ ret = snic_issue_hba_reset(snic, sc);
+ if (ret) {
+diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
+index b04dad8c7092..27c824bdebf0 100644
+--- a/drivers/staging/comedi/drivers/ni_mio_common.c
++++ b/drivers/staging/comedi/drivers/ni_mio_common.c
+@@ -4727,7 +4727,7 @@ static int cs5529_wait_for_idle(struct comedi_device *dev)
+ if ((status & NI67XX_CAL_STATUS_BUSY) == 0)
+ break;
+ set_current_state(TASK_INTERRUPTIBLE);
+- if (schedule_timeout(1))
++ if (schedule_min_hrtimeout())
+ return -EIO;
+ }
+ if (i == timeout) {
+diff --git a/drivers/staging/lustre/lnet/lnet/lib-eq.c b/drivers/staging/lustre/lnet/lnet/lib-eq.c
+new file mode 100644
+index 000000000000..8cca151741b2
+--- /dev/null
++++ b/drivers/staging/lustre/lnet/lnet/lib-eq.c
+@@ -0,0 +1,426 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * GPL HEADER START
++ *
++ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 only,
++ * as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License version 2 for more details (a copy is included
++ * in the LICENSE file that accompanied this code).
++ *
++ * You should have received a copy of the GNU General Public License
++ * version 2 along with this program; If not, see
++ * http://www.gnu.org/licenses/gpl-2.0.html
++ *
++ * GPL HEADER END
++ */
++/*
++ * Copyright (c) 2003, 2010, Oracle and/or its affiliates. All rights reserved.
++ * Use is subject to license terms.
++ *
++ * Copyright (c) 2012, Intel Corporation.
++ */
++/*
++ * This file is part of Lustre, http://www.lustre.org/
++ * Lustre is a trademark of Sun Microsystems, Inc.
++ *
++ * lnet/lnet/lib-eq.c
++ *
++ * Library level Event queue management routines
++ */
++
++#define DEBUG_SUBSYSTEM S_LNET
++
++#include <linux/lnet/lib-lnet.h>
++
++/**
++ * Create an event queue that has room for \a count number of events.
++ *
++ * The event queue is circular and older events will be overwritten by new
++ * ones if they are not removed in time by the user using the functions
++ * LNetEQGet(), LNetEQWait(), or LNetEQPoll(). It is up to the user to
++ * determine the appropriate size of the event queue to prevent this loss
++ * of events. Note that when EQ handler is specified in \a callback, no
++ * event loss can happen, since the handler is run for each event deposited
++ * into the EQ.
++ *
++ * \param count The number of events to be stored in the event queue. It
++ * will be rounded up to the next power of two.
++ * \param callback A handler function that runs when an event is deposited
++ * into the EQ. The constant value LNET_EQ_HANDLER_NONE can be used to
++ * indicate that no event handler is desired.
++ * \param handle On successful return, this location will hold a handle for
++ * the newly created EQ.
++ *
++ * \retval 0 On success.
++ * \retval -EINVAL If an parameter is not valid.
++ * \retval -ENOMEM If memory for the EQ can't be allocated.
++ *
++ * \see lnet_eq_handler_t for the discussion on EQ handler semantics.
++ */
++int
++LNetEQAlloc(unsigned int count, lnet_eq_handler_t callback,
++ struct lnet_handle_eq *handle)
++{
++ struct lnet_eq *eq;
++
++ LASSERT(the_lnet.ln_refcount > 0);
++
++ /*
++ * We need count to be a power of 2 so that when eq_{enq,deq}_seq
++ * overflow, they don't skip entries, so the queue has the same
++ * apparent capacity at all times
++ */
++ if (count)
++ count = roundup_pow_of_two(count);
++
++ if (callback != LNET_EQ_HANDLER_NONE && count)
++ CWARN("EQ callback is guaranteed to get every event, do you still want to set eqcount %d for polling event which will have locking overhead? Please contact with developer to confirm\n", count);
++
++ /*
++ * count can be 0 if only need callback, we can eliminate
++ * overhead of enqueue event
++ */
++ if (!count && callback == LNET_EQ_HANDLER_NONE)
++ return -EINVAL;
++
++ eq = kzalloc(sizeof(*eq), GFP_NOFS);
++ if (!eq)
++ return -ENOMEM;
++
++ if (count) {
++ eq->eq_events = kvmalloc_array(count, sizeof(struct lnet_event),
++ GFP_KERNEL | __GFP_ZERO);
++ if (!eq->eq_events)
++ goto failed;
++ /*
++ * NB allocator has set all event sequence numbers to 0,
++ * so all them should be earlier than eq_deq_seq
++ */
++ }
++
++ eq->eq_deq_seq = 1;
++ eq->eq_enq_seq = 1;
++ eq->eq_size = count;
++ eq->eq_callback = callback;
++
++ eq->eq_refs = cfs_percpt_alloc(lnet_cpt_table(),
++ sizeof(*eq->eq_refs[0]));
++ if (!eq->eq_refs)
++ goto failed;
++
++ /* MUST hold both exclusive lnet_res_lock */
++ lnet_res_lock(LNET_LOCK_EX);
++ /*
++ * NB: hold lnet_eq_wait_lock for EQ link/unlink, so we can do
++ * both EQ lookup and poll event with only lnet_eq_wait_lock
++ */
++ lnet_eq_wait_lock();
++
++ lnet_res_lh_initialize(&the_lnet.ln_eq_container, &eq->eq_lh);
++ list_add(&eq->eq_list, &the_lnet.ln_eq_container.rec_active);
++
++ lnet_eq_wait_unlock();
++ lnet_res_unlock(LNET_LOCK_EX);
++
++ lnet_eq2handle(handle, eq);
++ return 0;
++
++failed:
++ kvfree(eq->eq_events);
++
++ if (eq->eq_refs)
++ cfs_percpt_free(eq->eq_refs);
++
++ kfree(eq);
++ return -ENOMEM;
++}
++EXPORT_SYMBOL(LNetEQAlloc);
++
++/**
++ * Release the resources associated with an event queue if it's idle;
++ * otherwise do nothing and it's up to the user to try again.
++ *
++ * \param eqh A handle for the event queue to be released.
++ *
++ * \retval 0 If the EQ is not in use and freed.
++ * \retval -ENOENT If \a eqh does not point to a valid EQ.
++ * \retval -EBUSY If the EQ is still in use by some MDs.
++ */
++int
++LNetEQFree(struct lnet_handle_eq eqh)
++{
++ struct lnet_eq *eq;
++ struct lnet_event *events = NULL;
++ int **refs = NULL;
++ int *ref;
++ int rc = 0;
++ int size = 0;
++ int i;
++
++ LASSERT(the_lnet.ln_refcount > 0);
++
++ lnet_res_lock(LNET_LOCK_EX);
++ /*
++ * NB: hold lnet_eq_wait_lock for EQ link/unlink, so we can do
++ * both EQ lookup and poll event with only lnet_eq_wait_lock
++ */
++ lnet_eq_wait_lock();
++
++ eq = lnet_handle2eq(&eqh);
++ if (!eq) {
++ rc = -ENOENT;
++ goto out;
++ }
++
++ cfs_percpt_for_each(ref, i, eq->eq_refs) {
++ LASSERT(*ref >= 0);
++ if (!*ref)
++ continue;
++
++ CDEBUG(D_NET, "Event equeue (%d: %d) busy on destroy.\n",
++ i, *ref);
++ rc = -EBUSY;
++ goto out;
++ }
++
++ /* stash for free after lock dropped */
++ events = eq->eq_events;
++ size = eq->eq_size;
++ refs = eq->eq_refs;
++
++ lnet_res_lh_invalidate(&eq->eq_lh);
++ list_del(&eq->eq_list);
++ kfree(eq);
++ out:
++ lnet_eq_wait_unlock();
++ lnet_res_unlock(LNET_LOCK_EX);
++
++ kvfree(events);
++ if (refs)
++ cfs_percpt_free(refs);
++
++ return rc;
++}
++EXPORT_SYMBOL(LNetEQFree);
++
++void
++lnet_eq_enqueue_event(struct lnet_eq *eq, struct lnet_event *ev)
++{
++ /* MUST called with resource lock hold but w/o lnet_eq_wait_lock */
++ int index;
++
++ if (!eq->eq_size) {
++ LASSERT(eq->eq_callback != LNET_EQ_HANDLER_NONE);
++ eq->eq_callback(ev);
++ return;
++ }
++
++ lnet_eq_wait_lock();
++ ev->sequence = eq->eq_enq_seq++;
++
++ LASSERT(eq->eq_size == LOWEST_BIT_SET(eq->eq_size));
++ index = ev->sequence & (eq->eq_size - 1);
++
++ eq->eq_events[index] = *ev;
++
++ if (eq->eq_callback != LNET_EQ_HANDLER_NONE)
++ eq->eq_callback(ev);
++
++ /* Wake anyone waiting in LNetEQPoll() */
++ if (waitqueue_active(&the_lnet.ln_eq_waitq))
++ wake_up_all(&the_lnet.ln_eq_waitq);
++ lnet_eq_wait_unlock();
++}
++
++static int
++lnet_eq_dequeue_event(struct lnet_eq *eq, struct lnet_event *ev)
++{
++ int new_index = eq->eq_deq_seq & (eq->eq_size - 1);
++ struct lnet_event *new_event = &eq->eq_events[new_index];
++ int rc;
++
++ /* must called with lnet_eq_wait_lock hold */
++ if (LNET_SEQ_GT(eq->eq_deq_seq, new_event->sequence))
++ return 0;
++
++ /* We've got a new event... */
++ *ev = *new_event;
++
++ CDEBUG(D_INFO, "event: %p, sequence: %lu, eq->size: %u\n",
++ new_event, eq->eq_deq_seq, eq->eq_size);
++
++ /* ...but did it overwrite an event we've not seen yet? */
++ if (eq->eq_deq_seq == new_event->sequence) {
++ rc = 1;
++ } else {
++ /*
++ * don't complain with CERROR: some EQs are sized small
++ * anyway; if it's important, the caller should complain
++ */
++ CDEBUG(D_NET, "Event Queue Overflow: eq seq %lu ev seq %lu\n",
++ eq->eq_deq_seq, new_event->sequence);
++ rc = -EOVERFLOW;
++ }
++
++ eq->eq_deq_seq = new_event->sequence + 1;
++ return rc;
++}
++
++/**
++ * A nonblocking function that can be used to get the next event in an EQ.
++ * If an event handler is associated with the EQ, the handler will run before
++ * this function returns successfully. The event is removed from the queue.
++ *
++ * \param eventq A handle for the event queue.
++ * \param event On successful return (1 or -EOVERFLOW), this location will
++ * hold the next event in the EQ.
++ *
++ * \retval 0 No pending event in the EQ.
++ * \retval 1 Indicates success.
++ * \retval -ENOENT If \a eventq does not point to a valid EQ.
++ * \retval -EOVERFLOW Indicates success (i.e., an event is returned) and that
++ * at least one event between this event and the last event obtained from the
++ * EQ has been dropped due to limited space in the EQ.
++ */
++
++/**
++ * Block the calling process until there is an event in the EQ.
++ * If an event handler is associated with the EQ, the handler will run before
++ * this function returns successfully. This function returns the next event
++ * in the EQ and removes it from the EQ.
++ *
++ * \param eventq A handle for the event queue.
++ * \param event On successful return (1 or -EOVERFLOW), this location will
++ * hold the next event in the EQ.
++ *
++ * \retval 1 Indicates success.
++ * \retval -ENOENT If \a eventq does not point to a valid EQ.
++ * \retval -EOVERFLOW Indicates success (i.e., an event is returned) and that
++ * at least one event between this event and the last event obtained from the
++ * EQ has been dropped due to limited space in the EQ.
++ */
++
++static int
++lnet_eq_wait_locked(int *timeout_ms, long state)
++__must_hold(&the_lnet.ln_eq_wait_lock)
++{
++ int tms = *timeout_ms;
++ int wait;
++ wait_queue_entry_t wl;
++ unsigned long now;
++
++ if (!tms)
++ return -ENXIO; /* don't want to wait and no new event */
++
++ init_waitqueue_entry(&wl, current);
++ set_current_state(state);
++ add_wait_queue(&the_lnet.ln_eq_waitq, &wl);
++
++ lnet_eq_wait_unlock();
++
++ if (tms < 0) {
++ schedule();
++ } else {
++ now = jiffies;
++ schedule_msec_hrtimeout((tms));
++ tms -= jiffies_to_msecs(jiffies - now);
++ if (tms < 0) /* no more wait but may have new event */
++ tms = 0;
++ }
++
++ wait = tms; /* might need to call here again */
++ *timeout_ms = tms;
++
++ lnet_eq_wait_lock();
++ remove_wait_queue(&the_lnet.ln_eq_waitq, &wl);
++
++ return wait;
++}
++
++/**
++ * Block the calling process until there's an event from a set of EQs or
++ * timeout happens.
++ *
++ * If an event handler is associated with the EQ, the handler will run before
++ * this function returns successfully, in which case the corresponding event
++ * is consumed.
++ *
++ * LNetEQPoll() provides a timeout to allow applications to poll, block for a
++ * fixed period, or block indefinitely.
++ *
++ * \param eventqs,neq An array of EQ handles, and size of the array.
++ * \param timeout_ms Time in milliseconds to wait for an event to occur on
++ * one of the EQs. The constant LNET_TIME_FOREVER can be used to indicate an
++ * infinite timeout.
++ * \param interruptible, if true, use TASK_INTERRUPTIBLE, else TASK_NOLOAD
++ * \param event,which On successful return (1 or -EOVERFLOW), \a event will
++ * hold the next event in the EQs, and \a which will contain the index of the
++ * EQ from which the event was taken.
++ *
++ * \retval 0 No pending event in the EQs after timeout.
++ * \retval 1 Indicates success.
++ * \retval -EOVERFLOW Indicates success (i.e., an event is returned) and that
++ * at least one event between this event and the last event obtained from the
++ * EQ indicated by \a which has been dropped due to limited space in the EQ.
++ * \retval -ENOENT If there's an invalid handle in \a eventqs.
++ */
++int
++LNetEQPoll(struct lnet_handle_eq *eventqs, int neq, int timeout_ms,
++ int interruptible,
++ struct lnet_event *event, int *which)
++{
++ int wait = 1;
++ int rc;
++ int i;
++
++ LASSERT(the_lnet.ln_refcount > 0);
++
++ if (neq < 1)
++ return -ENOENT;
++
++ lnet_eq_wait_lock();
++
++ for (;;) {
++ for (i = 0; i < neq; i++) {
++ struct lnet_eq *eq = lnet_handle2eq(&eventqs[i]);
++
++ if (!eq) {
++ lnet_eq_wait_unlock();
++ return -ENOENT;
++ }
++
++ rc = lnet_eq_dequeue_event(eq, event);
++ if (rc) {
++ lnet_eq_wait_unlock();
++ *which = i;
++ return rc;
++ }
++ }
++
++ if (!wait)
++ break;
++
++ /*
++ * return value of lnet_eq_wait_locked:
++ * -1 : did nothing and it's sure no new event
++ * 1 : sleep inside and wait until new event
++ * 0 : don't want to wait anymore, but might have new event
++ * so need to call dequeue again
++ */
++ wait = lnet_eq_wait_locked(&timeout_ms,
++ interruptible ? TASK_INTERRUPTIBLE
++ : TASK_NOLOAD);
++ if (wait < 0) /* no new event */
++ break;
++ }
++
++ lnet_eq_wait_unlock();
++ return 0;
++}
+diff --git a/drivers/staging/rts5208/rtsx.c b/drivers/staging/rts5208/rtsx.c
+index fa597953e9a0..685cf842badc 100644
+--- a/drivers/staging/rts5208/rtsx.c
++++ b/drivers/staging/rts5208/rtsx.c
+@@ -490,7 +490,7 @@ static int rtsx_polling_thread(void *__dev)
+
+ for (;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+- schedule_timeout(msecs_to_jiffies(POLLING_INTERVAL));
++ schedule_msec_hrtimeout((POLLING_INTERVAL));
+
+ /* lock the device pointers */
+ mutex_lock(&dev->dev_mutex);
+diff --git a/drivers/staging/speakup/speakup_acntpc.c b/drivers/staging/speakup/speakup_acntpc.c
+index c94328a5bd4a..6e7d4671aa69 100644
+--- a/drivers/staging/speakup/speakup_acntpc.c
++++ b/drivers/staging/speakup/speakup_acntpc.c
+@@ -198,7 +198,7 @@ static void do_catch_up(struct spk_synth *synth)
+ full_time_val = full_time->u.n.value;
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+ if (synth_full()) {
+- schedule_timeout(msecs_to_jiffies(full_time_val));
++ schedule_msec_hrtimeout((full_time_val));
+ continue;
+ }
+ set_current_state(TASK_RUNNING);
+@@ -226,7 +226,7 @@ static void do_catch_up(struct spk_synth *synth)
+ jiffy_delta_val = jiffy_delta->u.n.value;
+ delay_time_val = delay_time->u.n.value;
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+- schedule_timeout(msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout(delay_time_val);
+ jiff_max = jiffies + jiffy_delta_val;
+ }
+ }
+diff --git a/drivers/staging/speakup/speakup_apollo.c b/drivers/staging/speakup/speakup_apollo.c
+index 0877b4044c28..627102d048c1 100644
+--- a/drivers/staging/speakup/speakup_apollo.c
++++ b/drivers/staging/speakup/speakup_apollo.c
+@@ -165,7 +165,7 @@ static void do_catch_up(struct spk_synth *synth)
+ if (!synth->io_ops->synth_out(synth, ch)) {
+ synth->io_ops->tiocmset(0, UART_MCR_RTS);
+ synth->io_ops->tiocmset(UART_MCR_RTS, 0);
+- schedule_timeout(msecs_to_jiffies(full_time_val));
++ schedule_msec_hrtimeout(full_time_val);
+ continue;
+ }
+ if (time_after_eq(jiffies, jiff_max) && (ch == SPACE)) {
+diff --git a/drivers/staging/speakup/speakup_decext.c b/drivers/staging/speakup/speakup_decext.c
+index ddbb7e97d118..f9502addc765 100644
+--- a/drivers/staging/speakup/speakup_decext.c
++++ b/drivers/staging/speakup/speakup_decext.c
+@@ -176,7 +176,7 @@ static void do_catch_up(struct spk_synth *synth)
+ if (ch == '\n')
+ ch = 0x0D;
+ if (synth_full() || !synth->io_ops->synth_out(synth, ch)) {
+- schedule_timeout(msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout(delay_time_val);
+ continue;
+ }
+ set_current_state(TASK_RUNNING);
+diff --git a/drivers/staging/speakup/speakup_decpc.c b/drivers/staging/speakup/speakup_decpc.c
+index 459ee0c0bd57..52b539544c98 100644
+--- a/drivers/staging/speakup/speakup_decpc.c
++++ b/drivers/staging/speakup/speakup_decpc.c
+@@ -394,7 +394,7 @@ static void do_catch_up(struct spk_synth *synth)
+ if (ch == '\n')
+ ch = 0x0D;
+ if (dt_sendchar(ch)) {
+- schedule_timeout(msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout((delay_time_val));
+ continue;
+ }
+ set_current_state(TASK_RUNNING);
+diff --git a/drivers/staging/speakup/speakup_dectlk.c b/drivers/staging/speakup/speakup_dectlk.c
+index dccb4ea29d37..8ecead307d04 100644
+--- a/drivers/staging/speakup/speakup_dectlk.c
++++ b/drivers/staging/speakup/speakup_dectlk.c
+@@ -244,7 +244,7 @@ static void do_catch_up(struct spk_synth *synth)
+ if (ch == '\n')
+ ch = 0x0D;
+ if (synth_full_val || !synth->io_ops->synth_out(synth, ch)) {
+- schedule_timeout(msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout(delay_time_val);
+ continue;
+ }
+ set_current_state(TASK_RUNNING);
+diff --git a/drivers/staging/speakup/speakup_dtlk.c b/drivers/staging/speakup/speakup_dtlk.c
+index dbebed0eeeec..6d83c13ca4a6 100644
+--- a/drivers/staging/speakup/speakup_dtlk.c
++++ b/drivers/staging/speakup/speakup_dtlk.c
+@@ -211,7 +211,7 @@ static void do_catch_up(struct spk_synth *synth)
+ delay_time_val = delay_time->u.n.value;
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+ if (synth_full()) {
+- schedule_timeout(msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout((delay_time_val));
+ continue;
+ }
+ set_current_state(TASK_RUNNING);
+@@ -227,7 +227,7 @@ static void do_catch_up(struct spk_synth *synth)
+ delay_time_val = delay_time->u.n.value;
+ jiffy_delta_val = jiffy_delta->u.n.value;
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+- schedule_timeout(msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout((delay_time_val));
+ jiff_max = jiffies + jiffy_delta_val;
+ }
+ }
+diff --git a/drivers/staging/speakup/speakup_keypc.c b/drivers/staging/speakup/speakup_keypc.c
+index b788272da4f9..d5dac16c04d8 100644
+--- a/drivers/staging/speakup/speakup_keypc.c
++++ b/drivers/staging/speakup/speakup_keypc.c
+@@ -199,7 +199,7 @@ static void do_catch_up(struct spk_synth *synth)
+ full_time_val = full_time->u.n.value;
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+ if (synth_full()) {
+- schedule_timeout(msecs_to_jiffies(full_time_val));
++ schedule_msec_hrtimeout((full_time_val));
+ continue;
+ }
+ set_current_state(TASK_RUNNING);
+@@ -232,7 +232,7 @@ static void do_catch_up(struct spk_synth *synth)
+ jiffy_delta_val = jiffy_delta->u.n.value;
+ delay_time_val = delay_time->u.n.value;
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+- schedule_timeout(msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout((delay_time_val));
+ jiff_max = jiffies+jiffy_delta_val;
+ }
+ }
+diff --git a/drivers/staging/speakup/synth.c b/drivers/staging/speakup/synth.c
+index 3568bfb89912..0a80b3b098b2 100644
+--- a/drivers/staging/speakup/synth.c
++++ b/drivers/staging/speakup/synth.c
+@@ -93,12 +93,8 @@ static void _spk_do_catch_up(struct spk_synth *synth, int unicode)
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+ if (ch == '\n')
+ ch = synth->procspeech;
+- if (unicode)
+- ret = synth->io_ops->synth_out_unicode(synth, ch);
+- else
+- ret = synth->io_ops->synth_out(synth, ch);
+- if (!ret) {
+- schedule_timeout(msecs_to_jiffies(full_time_val));
++ if (!synth->io_ops->synth_out(synth, ch)) {
++ schedule_msec_hrtimeout(full_time_val);
+ continue;
+ }
+ if (time_after_eq(jiffies, jiff_max) && (ch == SPACE)) {
+@@ -108,11 +104,9 @@ static void _spk_do_catch_up(struct spk_synth *synth, int unicode)
+ full_time_val = full_time->u.n.value;
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+ if (synth->io_ops->synth_out(synth, synth->procspeech))
+- schedule_timeout(
+- msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout(delay_time_val);
+ else
+- schedule_timeout(
+- msecs_to_jiffies(full_time_val));
++ schedule_msec_hrtimeout(full_time_val);
+ jiff_max = jiffies + jiffy_delta_val;
+ }
+ set_current_state(TASK_RUNNING);
+diff --git a/drivers/staging/unisys/visornic/visornic_main.c b/drivers/staging/unisys/visornic/visornic_main.c
+index 1c1a470d2e50..cbac00e586b0 100644
+--- a/drivers/staging/unisys/visornic/visornic_main.c
++++ b/drivers/staging/unisys/visornic/visornic_main.c
+@@ -549,7 +549,7 @@ static int visornic_disable_with_timeout(struct net_device *netdev,
+ }
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&devdata->priv_lock, flags);
+- wait += schedule_timeout(msecs_to_jiffies(10));
++ wait += schedule_msec_hrtimeout((10));
+ spin_lock_irqsave(&devdata->priv_lock, flags);
+ }
+
+@@ -560,7 +560,7 @@ static int visornic_disable_with_timeout(struct net_device *netdev,
+ while (1) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&devdata->priv_lock, flags);
+- schedule_timeout(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout((10));
+ spin_lock_irqsave(&devdata->priv_lock, flags);
+ if (atomic_read(&devdata->usage))
+ break;
+@@ -714,7 +714,7 @@ static int visornic_enable_with_timeout(struct net_device *netdev,
+ }
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&devdata->priv_lock, flags);
+- wait += schedule_timeout(msecs_to_jiffies(10));
++ wait += schedule_msec_hrtimeout((10));
+ spin_lock_irqsave(&devdata->priv_lock, flags);
+ }
+
+diff --git a/drivers/video/fbdev/omap/hwa742.c b/drivers/video/fbdev/omap/hwa742.c
+index 6199d4806193..7c7165f2dad4 100644
+--- a/drivers/video/fbdev/omap/hwa742.c
++++ b/drivers/video/fbdev/omap/hwa742.c
+@@ -926,7 +926,7 @@ static void hwa742_resume(void)
+ if (hwa742_read_reg(HWA742_PLL_DIV_REG) & (1 << 7))
+ break;
+ set_current_state(TASK_UNINTERRUPTIBLE);
+- schedule_timeout(msecs_to_jiffies(5));
++ schedule_msec_hrtimeout((5));
+ }
+ hwa742_set_update_mode(hwa742.update_mode_before_suspend);
+ }
+diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
+index d59c8a59f582..e103cce28de7 100644
+--- a/drivers/video/fbdev/pxafb.c
++++ b/drivers/video/fbdev/pxafb.c
+@@ -1287,7 +1287,7 @@ static int pxafb_smart_thread(void *arg)
+ mutex_unlock(&fbi->ctrlr_lock);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+- schedule_timeout(msecs_to_jiffies(30));
++ schedule_msec_hrtimeout((30));
+ }
+
+ pr_debug("%s(): task ending\n", __func__);
+diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
+index c5880329ae37..aad921814170 100644
+--- a/fs/btrfs/extent-tree.c
++++ b/fs/btrfs/extent-tree.c
+@@ -6206,7 +6206,7 @@ int btrfs_delalloc_reserve_metadata(struct btrfs_inode *inode, u64 num_bytes)
+ flush = BTRFS_RESERVE_FLUSH_LIMIT;
+
+ if (btrfs_transaction_in_commit(fs_info))
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ }
+
+ if (delalloc_lock)
+diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c
+index ffca2abf13d0..89b2a7f7397e 100644
+--- a/fs/btrfs/inode-map.c
++++ b/fs/btrfs/inode-map.c
+@@ -75,7 +75,7 @@ static int caching_kthread(void *data)
+ btrfs_release_path(path);
+ root->ino_cache_progress = last;
+ up_read(&fs_info->commit_root_sem);
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ goto again;
+ } else
+ continue;
+diff --git a/sound/usb/line6/pcm.c b/sound/usb/line6/pcm.c
+index 72c6f8e82a7e..46d8c2a148ad 100644
+--- a/sound/usb/line6/pcm.c
++++ b/sound/usb/line6/pcm.c
+@@ -131,7 +131,7 @@ static void line6_wait_clear_audio_urbs(struct snd_line6_pcm *line6pcm,
+ if (!alive)
+ break;
+ set_current_state(TASK_UNINTERRUPTIBLE);
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ } while (--timeout > 0);
+ if (alive)
+ dev_err(line6pcm->line6->ifcdev,
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-0009-Replace-all-calls-to-schedule_timeout_interruptible-.patch b/sys-kernel/linux-sources-redcore/files/5.1-0009-Replace-all-calls-to-schedule_timeout_interruptible-.patch
new file mode 100644
index 00000000..5e044ab3
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-0009-Replace-all-calls-to-schedule_timeout_interruptible-.patch
@@ -0,0 +1,311 @@
+From ed9d6f38013a94e1ea56b33c02706a4079b31e92 Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Mon, 20 Feb 2017 13:30:07 +1100
+Subject: [PATCH 09/16] Replace all calls to schedule_timeout_interruptible of
+ potentially under 50ms to use schedule_msec_hrtimeout_interruptible.
+
+---
+ drivers/hwmon/fam15h_power.c | 2 +-
+ drivers/iio/light/tsl2563.c | 6 +-----
+ drivers/media/i2c/msp3400-driver.c | 4 ++--
+ drivers/media/pci/ivtv/ivtv-gpio.c | 6 +++---
+ drivers/media/radio/radio-mr800.c | 2 +-
+ drivers/media/radio/radio-tea5777.c | 2 +-
+ drivers/media/radio/tea575x.c | 2 +-
+ drivers/parport/ieee1284.c | 2 +-
+ drivers/parport/ieee1284_ops.c | 2 +-
+ drivers/platform/x86/intel_ips.c | 8 ++++----
+ net/core/pktgen.c | 2 +-
+ sound/soc/codecs/wm8350.c | 12 ++++++------
+ sound/soc/codecs/wm8900.c | 2 +-
+ sound/soc/codecs/wm9713.c | 4 ++--
+ 14 files changed, 26 insertions(+), 30 deletions(-)
+
+diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
+index 9545a346044f..c24cf1302ec7 100644
+--- a/drivers/hwmon/fam15h_power.c
++++ b/drivers/hwmon/fam15h_power.c
+@@ -237,7 +237,7 @@ static ssize_t power1_average_show(struct device *dev,
+ prev_ptsc[cu] = data->cpu_sw_pwr_ptsc[cu];
+ }
+
+- leftover = schedule_timeout_interruptible(msecs_to_jiffies(data->power_period));
++ leftover = schedule_msec_hrtimeout_interruptible((data->power_period));
+ if (leftover)
+ return 0;
+
+diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
+index 6bbb0b1e6032..f4b83648c405 100644
+--- a/drivers/iio/light/tsl2563.c
++++ b/drivers/iio/light/tsl2563.c
+@@ -282,11 +282,7 @@ static void tsl2563_wait_adc(struct tsl2563_chip *chip)
+ default:
+ delay = 402;
+ }
+- /*
+- * TODO: Make sure that we wait at least required delay but why we
+- * have to extend it one tick more?
+- */
+- schedule_timeout_interruptible(msecs_to_jiffies(delay) + 2);
++ schedule_msec_hrtimeout_interruptible(delay + 1);
+ }
+
+ static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc)
+diff --git a/drivers/media/i2c/msp3400-driver.c b/drivers/media/i2c/msp3400-driver.c
+index 522fb1d561e7..47d1afee1d04 100644
+--- a/drivers/media/i2c/msp3400-driver.c
++++ b/drivers/media/i2c/msp3400-driver.c
+@@ -179,7 +179,7 @@ static int msp_read(struct i2c_client *client, int dev, int addr)
+ break;
+ dev_warn(&client->dev, "I/O error #%d (read 0x%02x/0x%02x)\n", err,
+ dev, addr);
+- schedule_timeout_interruptible(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout_interruptible((10));
+ }
+ if (err == 3) {
+ dev_warn(&client->dev, "resetting chip, sound will go off.\n");
+@@ -220,7 +220,7 @@ static int msp_write(struct i2c_client *client, int dev, int addr, int val)
+ break;
+ dev_warn(&client->dev, "I/O error #%d (write 0x%02x/0x%02x)\n", err,
+ dev, addr);
+- schedule_timeout_interruptible(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout_interruptible((10));
+ }
+ if (err == 3) {
+ dev_warn(&client->dev, "resetting chip, sound will go off.\n");
+diff --git a/drivers/media/pci/ivtv/ivtv-gpio.c b/drivers/media/pci/ivtv/ivtv-gpio.c
+index f752f3993687..23372af61ebf 100644
+--- a/drivers/media/pci/ivtv/ivtv-gpio.c
++++ b/drivers/media/pci/ivtv/ivtv-gpio.c
+@@ -117,7 +117,7 @@ void ivtv_reset_ir_gpio(struct ivtv *itv)
+ curout = (curout & ~0xF) | 1;
+ write_reg(curout, IVTV_REG_GPIO_OUT);
+ /* We could use something else for smaller time */
+- schedule_timeout_interruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_interruptible((1));
+ curout |= 2;
+ write_reg(curout, IVTV_REG_GPIO_OUT);
+ curdir &= ~0x80;
+@@ -137,11 +137,11 @@ int ivtv_reset_tuner_gpio(void *dev, int component, int cmd, int value)
+ curout = read_reg(IVTV_REG_GPIO_OUT);
+ curout &= ~(1 << itv->card->xceive_pin);
+ write_reg(curout, IVTV_REG_GPIO_OUT);
+- schedule_timeout_interruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_interruptible((1));
+
+ curout |= 1 << itv->card->xceive_pin;
+ write_reg(curout, IVTV_REG_GPIO_OUT);
+- schedule_timeout_interruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_interruptible((1));
+ return 0;
+ }
+
+diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
+index ab1324f68199..3fdb422a5caa 100644
+--- a/drivers/media/radio/radio-mr800.c
++++ b/drivers/media/radio/radio-mr800.c
+@@ -378,7 +378,7 @@ static int vidioc_s_hw_freq_seek(struct file *file, void *priv,
+ retval = -ENODATA;
+ break;
+ }
+- if (schedule_timeout_interruptible(msecs_to_jiffies(10))) {
++ if (schedule_msec_hrtimeout_interruptible((10))) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+diff --git a/drivers/media/radio/radio-tea5777.c b/drivers/media/radio/radio-tea5777.c
+index 61f751cf1aa4..7eb30468091e 100644
+--- a/drivers/media/radio/radio-tea5777.c
++++ b/drivers/media/radio/radio-tea5777.c
+@@ -245,7 +245,7 @@ static int radio_tea5777_update_read_reg(struct radio_tea5777 *tea, int wait)
+ }
+
+ if (wait) {
+- if (schedule_timeout_interruptible(msecs_to_jiffies(wait)))
++ if (schedule_msec_hrtimeout_interruptible((wait)))
+ return -ERESTARTSYS;
+ }
+
+diff --git a/drivers/media/radio/tea575x.c b/drivers/media/radio/tea575x.c
+index f89f83e04741..325987cd5997 100644
+--- a/drivers/media/radio/tea575x.c
++++ b/drivers/media/radio/tea575x.c
+@@ -416,7 +416,7 @@ int snd_tea575x_s_hw_freq_seek(struct file *file, struct snd_tea575x *tea,
+ for (;;) {
+ if (time_after(jiffies, timeout))
+ break;
+- if (schedule_timeout_interruptible(msecs_to_jiffies(10))) {
++ if (schedule_msec_hrtimeout_interruptible((10))) {
+ /* some signal arrived, stop search */
+ tea->val &= ~TEA575X_BIT_SEARCH;
+ snd_tea575x_set_freq(tea);
+diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c
+index f12b9da69255..6ca6eecbdb2d 100644
+--- a/drivers/parport/ieee1284.c
++++ b/drivers/parport/ieee1284.c
+@@ -208,7 +208,7 @@ int parport_wait_peripheral(struct parport *port,
+ /* parport_wait_event didn't time out, but the
+ * peripheral wasn't actually ready either.
+ * Wait for another 10ms. */
+- schedule_timeout_interruptible(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout_interruptible((10));
+ }
+ }
+
+diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c
+index 5d41dda6da4e..34705f6b423f 100644
+--- a/drivers/parport/ieee1284_ops.c
++++ b/drivers/parport/ieee1284_ops.c
+@@ -537,7 +537,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
+ /* Yield the port for a while. */
+ if (count && dev->port->irq != PARPORT_IRQ_NONE) {
+ parport_release (dev);
+- schedule_timeout_interruptible(msecs_to_jiffies(40));
++ schedule_msec_hrtimeout_interruptible((40));
+ parport_claim_or_block (dev);
+ }
+ else
+diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c
+index bffe548187ee..c2918ee3e100 100644
+--- a/drivers/platform/x86/intel_ips.c
++++ b/drivers/platform/x86/intel_ips.c
+@@ -798,7 +798,7 @@ static int ips_adjust(void *data)
+ ips_gpu_lower(ips);
+
+ sleep:
+- schedule_timeout_interruptible(msecs_to_jiffies(IPS_ADJUST_PERIOD));
++ schedule_msec_hrtimeout_interruptible((IPS_ADJUST_PERIOD));
+ } while (!kthread_should_stop());
+
+ dev_dbg(ips->dev, "ips-adjust thread stopped\n");
+@@ -974,7 +974,7 @@ static int ips_monitor(void *data)
+ seqno_timestamp = get_jiffies_64();
+
+ old_cpu_power = thm_readl(THM_CEC);
+- schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
++ schedule_msec_hrtimeout_interruptible((IPS_SAMPLE_PERIOD));
+
+ /* Collect an initial average */
+ for (i = 0; i < IPS_SAMPLE_COUNT; i++) {
+@@ -1001,7 +1001,7 @@ static int ips_monitor(void *data)
+ mchp_samples[i] = mchp;
+ }
+
+- schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
++ schedule_msec_hrtimeout_interruptible((IPS_SAMPLE_PERIOD));
+ if (kthread_should_stop())
+ break;
+ }
+@@ -1028,7 +1028,7 @@ static int ips_monitor(void *data)
+ * us to reduce the sample frequency if the CPU and GPU are idle.
+ */
+ old_cpu_power = thm_readl(THM_CEC);
+- schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
++ schedule_msec_hrtimeout_interruptible((IPS_SAMPLE_PERIOD));
+ last_sample_period = IPS_SAMPLE_PERIOD;
+
+ timer_setup(&ips->timer, monitor_timeout, TIMER_DEFERRABLE);
+diff --git a/net/core/pktgen.c b/net/core/pktgen.c
+index f3f5a78cd062..edbed00a06ed 100644
+--- a/net/core/pktgen.c
++++ b/net/core/pktgen.c
+@@ -1901,7 +1901,7 @@ static void pktgen_mark_device(const struct pktgen_net *pn, const char *ifname)
+ mutex_unlock(&pktgen_thread_lock);
+ pr_debug("%s: waiting for %s to disappear....\n",
+ __func__, ifname);
+- schedule_timeout_interruptible(msecs_to_jiffies(msec_per_try));
++ schedule_msec_hrtimeout_interruptible((msec_per_try));
+ mutex_lock(&pktgen_thread_lock);
+
+ if (++i >= max_tries) {
+diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
+index e92ebe52d485..88791ebb6df0 100644
+--- a/sound/soc/codecs/wm8350.c
++++ b/sound/soc/codecs/wm8350.c
+@@ -236,10 +236,10 @@ static void wm8350_pga_work(struct work_struct *work)
+ out2->ramp == WM8350_RAMP_UP) {
+ /* delay is longer over 0dB as increases are larger */
+ if (i >= WM8350_OUTn_0dB)
+- schedule_timeout_interruptible(msecs_to_jiffies
++ schedule_msec_hrtimeout_interruptible(
+ (2));
+ else
+- schedule_timeout_interruptible(msecs_to_jiffies
++ schedule_msec_hrtimeout_interruptible(
+ (1));
+ } else
+ udelay(50); /* doesn't matter if we delay longer */
+@@ -1123,7 +1123,7 @@ static int wm8350_set_bias_level(struct snd_soc_component *component,
+ (platform->dis_out4 << 6));
+
+ /* wait for discharge */
+- schedule_timeout_interruptible(msecs_to_jiffies
++ schedule_msec_hrtimeout_interruptible(
+ (platform->
+ cap_discharge_msecs));
+
+@@ -1139,7 +1139,7 @@ static int wm8350_set_bias_level(struct snd_soc_component *component,
+ WM8350_VBUFEN);
+
+ /* wait for vmid */
+- schedule_timeout_interruptible(msecs_to_jiffies
++ schedule_msec_hrtimeout_interruptible(
+ (platform->
+ vmid_charge_msecs));
+
+@@ -1190,7 +1190,7 @@ static int wm8350_set_bias_level(struct snd_soc_component *component,
+ wm8350_reg_write(wm8350, WM8350_POWER_MGMT_1, pm1);
+
+ /* wait */
+- schedule_timeout_interruptible(msecs_to_jiffies
++ schedule_msec_hrtimeout_interruptible(
+ (platform->
+ vmid_discharge_msecs));
+
+@@ -1208,7 +1208,7 @@ static int wm8350_set_bias_level(struct snd_soc_component *component,
+ pm1 | WM8350_OUTPUT_DRAIN_EN);
+
+ /* wait */
+- schedule_timeout_interruptible(msecs_to_jiffies
++ schedule_msec_hrtimeout_interruptible(
+ (platform->drain_msecs));
+
+ pm1 &= ~WM8350_BIASEN;
+diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c
+index 1a14e902949d..68f17d9877ec 100644
+--- a/sound/soc/codecs/wm8900.c
++++ b/sound/soc/codecs/wm8900.c
+@@ -1112,7 +1112,7 @@ static int wm8900_set_bias_level(struct snd_soc_component *component,
+ /* Need to let things settle before stopping the clock
+ * to ensure that restart works, see "Stopping the
+ * master clock" in the datasheet. */
+- schedule_timeout_interruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_interruptible(1);
+ snd_soc_component_write(component, WM8900_REG_POWER2,
+ WM8900_REG_POWER2_SYSCLK_ENA);
+ break;
+diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
+index 5a2fdf4f69bf..aeb4e759de4c 100644
+--- a/sound/soc/codecs/wm9713.c
++++ b/sound/soc/codecs/wm9713.c
+@@ -203,7 +203,7 @@ static int wm9713_voice_shutdown(struct snd_soc_dapm_widget *w,
+
+ /* Gracefully shut down the voice interface. */
+ snd_soc_component_update_bits(component, AC97_HANDSET_RATE, 0x0f00, 0x0200);
+- schedule_timeout_interruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_interruptible(1);
+ snd_soc_component_update_bits(component, AC97_HANDSET_RATE, 0x0f00, 0x0f00);
+ snd_soc_component_update_bits(component, AC97_EXTENDED_MID, 0x1000, 0x1000);
+
+@@ -872,7 +872,7 @@ static int wm9713_set_pll(struct snd_soc_component *component,
+ wm9713->pll_in = freq_in;
+
+ /* wait 10ms AC97 link frames for the link to stabilise */
+- schedule_timeout_interruptible(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout_interruptible((10));
+ return 0;
+ }
+
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-0010-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch b/sys-kernel/linux-sources-redcore/files/5.1-0010-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch
new file mode 100644
index 00000000..ab601f4a
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-0010-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch
@@ -0,0 +1,160 @@
+From 4c8554b4da764ea564a9a2ef9faa481a61cb1a4b Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Mon, 20 Feb 2017 13:30:32 +1100
+Subject: [PATCH 10/16] Replace all calls to schedule_timeout_uninterruptible
+ of potentially under 50ms to use schedule_msec_hrtimeout_uninterruptible
+
+---
+ drivers/media/pci/cx18/cx18-gpio.c | 4 ++--
+ drivers/net/wireless/intel/ipw2x00/ipw2100.c | 4 ++--
+ drivers/rtc/rtc-wm8350.c | 6 +++---
+ drivers/scsi/lpfc/lpfc_scsi.c | 2 +-
+ sound/pci/maestro3.c | 4 ++--
+ sound/soc/codecs/rt5631.c | 4 ++--
+ sound/soc/soc-dapm.c | 2 +-
+ 7 files changed, 13 insertions(+), 13 deletions(-)
+
+diff --git a/drivers/media/pci/cx18/cx18-gpio.c b/drivers/media/pci/cx18/cx18-gpio.c
+index 012859e6dc7b..206bd08265a5 100644
+--- a/drivers/media/pci/cx18/cx18-gpio.c
++++ b/drivers/media/pci/cx18/cx18-gpio.c
+@@ -90,11 +90,11 @@ static void gpio_reset_seq(struct cx18 *cx, u32 active_lo, u32 active_hi,
+
+ /* Assert */
+ gpio_update(cx, mask, ~active_lo);
+- schedule_timeout_uninterruptible(msecs_to_jiffies(assert_msecs));
++ schedule_msec_hrtimeout_uninterruptible((assert_msecs));
+
+ /* Deassert */
+ gpio_update(cx, mask, ~active_hi);
+- schedule_timeout_uninterruptible(msecs_to_jiffies(recovery_msecs));
++ schedule_msec_hrtimeout_uninterruptible((recovery_msecs));
+ }
+
+ /*
+diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2100.c b/drivers/net/wireless/intel/ipw2x00/ipw2100.c
+index 52e5ed2d3bc2..7d72a8b62700 100644
+--- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c
++++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c
+@@ -830,7 +830,7 @@ static int ipw2100_hw_send_command(struct ipw2100_priv *priv,
+ * doesn't seem to have as many firmware restart cycles...
+ *
+ * As a test, we're sticking in a 1/100s delay here */
+- schedule_timeout_uninterruptible(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout_uninterruptible((10));
+
+ return 0;
+
+@@ -1281,7 +1281,7 @@ static int ipw2100_start_adapter(struct ipw2100_priv *priv)
+ IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
+ i = 5000;
+ do {
+- schedule_timeout_uninterruptible(msecs_to_jiffies(40));
++ schedule_msec_hrtimeout_uninterruptible((40));
+ /* Todo... wait for sync command ... */
+
+ read_register(priv->net_dev, IPW_REG_INTA, &inta);
+diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c
+index 483c7993516b..fddbaa475066 100644
+--- a/drivers/rtc/rtc-wm8350.c
++++ b/drivers/rtc/rtc-wm8350.c
+@@ -119,7 +119,7 @@ static int wm8350_rtc_settime(struct device *dev, struct rtc_time *tm)
+ /* Wait until confirmation of stopping */
+ do {
+ rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+- schedule_timeout_uninterruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_uninterruptible((1));
+ } while (--retries && !(rtc_ctrl & WM8350_RTC_STS));
+
+ if (!retries) {
+@@ -202,7 +202,7 @@ static int wm8350_rtc_stop_alarm(struct wm8350 *wm8350)
+ /* Wait until confirmation of stopping */
+ do {
+ rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+- schedule_timeout_uninterruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_uninterruptible((1));
+ } while (retries-- && !(rtc_ctrl & WM8350_RTC_ALMSTS));
+
+ if (!(rtc_ctrl & WM8350_RTC_ALMSTS))
+@@ -225,7 +225,7 @@ static int wm8350_rtc_start_alarm(struct wm8350 *wm8350)
+ /* Wait until confirmation */
+ do {
+ rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+- schedule_timeout_uninterruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_uninterruptible((1));
+ } while (retries-- && rtc_ctrl & WM8350_RTC_ALMSTS);
+
+ if (rtc_ctrl & WM8350_RTC_ALMSTS)
+diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
+index a497b2c0cb79..1ed8a04c5cdf 100644
+--- a/drivers/scsi/lpfc/lpfc_scsi.c
++++ b/drivers/scsi/lpfc/lpfc_scsi.c
+@@ -5007,7 +5007,7 @@ lpfc_reset_flush_io_context(struct lpfc_vport *vport, uint16_t tgt_id,
+ tgt_id, lun_id, context);
+ later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+ while (time_after(later, jiffies) && cnt) {
+- schedule_timeout_uninterruptible(msecs_to_jiffies(20));
++ schedule_msec_hrtimeout_uninterruptible((20));
+ cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
+ }
+ if (cnt) {
+diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
+index 1a9468c14aaf..410ad89a3c7c 100644
+--- a/sound/pci/maestro3.c
++++ b/sound/pci/maestro3.c
+@@ -2016,7 +2016,7 @@ static void snd_m3_ac97_reset(struct snd_m3 *chip)
+ outw(0, io + GPIO_DATA);
+ outw(dir | GPO_PRIMARY_AC97, io + GPIO_DIRECTION);
+
+- schedule_timeout_uninterruptible(msecs_to_jiffies(delay1));
++ schedule_msec_hrtimeout_uninterruptible((delay1));
+
+ outw(GPO_PRIMARY_AC97, io + GPIO_DATA);
+ udelay(5);
+@@ -2024,7 +2024,7 @@ static void snd_m3_ac97_reset(struct snd_m3 *chip)
+ outw(IO_SRAM_ENABLE | SERIAL_AC_LINK_ENABLE, io + RING_BUS_CTRL_A);
+ outw(~0, io + GPIO_MASK);
+
+- schedule_timeout_uninterruptible(msecs_to_jiffies(delay2));
++ schedule_msec_hrtimeout_uninterruptible((delay2));
+
+ if (! snd_m3_try_read_vendor(chip))
+ break;
+diff --git a/sound/soc/codecs/rt5631.c b/sound/soc/codecs/rt5631.c
+index 865f49ac38dd..3c1190dd114f 100644
+--- a/sound/soc/codecs/rt5631.c
++++ b/sound/soc/codecs/rt5631.c
+@@ -419,7 +419,7 @@ static void onebit_depop_mute_stage(struct snd_soc_component *component, int ena
+ hp_zc = snd_soc_component_read32(component, RT5631_INT_ST_IRQ_CTRL_2);
+ snd_soc_component_write(component, RT5631_INT_ST_IRQ_CTRL_2, hp_zc & 0xf7ff);
+ if (enable) {
+- schedule_timeout_uninterruptible(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout_uninterruptible((10));
+ /* config one-bit depop parameter */
+ rt5631_write_index(component, RT5631_SPK_INTL_CTRL, 0x307f);
+ snd_soc_component_update_bits(component, RT5631_HP_OUT_VOL,
+@@ -529,7 +529,7 @@ static void depop_seq_mute_stage(struct snd_soc_component *component, int enable
+ hp_zc = snd_soc_component_read32(component, RT5631_INT_ST_IRQ_CTRL_2);
+ snd_soc_component_write(component, RT5631_INT_ST_IRQ_CTRL_2, hp_zc & 0xf7ff);
+ if (enable) {
+- schedule_timeout_uninterruptible(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout_uninterruptible((10));
+
+ /* config depop sequence parameter */
+ rt5631_write_index(component, RT5631_SPK_INTL_CTRL, 0x302f);
+diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
+index 0382a47b30bd..0d805d3563ca 100644
+--- a/sound/soc/soc-dapm.c
++++ b/sound/soc/soc-dapm.c
+@@ -154,7 +154,7 @@ static void dapm_assert_locked(struct snd_soc_dapm_context *dapm)
+ static void pop_wait(u32 pop_time)
+ {
+ if (pop_time)
+- schedule_timeout_uninterruptible(msecs_to_jiffies(pop_time));
++ schedule_msec_hrtimeout_uninterruptible((pop_time));
+ }
+
+ __printf(3, 4)
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-0011-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch b/sys-kernel/linux-sources-redcore/files/5.1-0011-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch
new file mode 100644
index 00000000..a18d030a
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-0011-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch
@@ -0,0 +1,69 @@
+From 876598b9dbe9c1f27feae36c2e2deacdd4beaf9d Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Mon, 20 Feb 2017 13:32:58 +1100
+Subject: [PATCH 11/16] Don't use hrtimer overlay when pm_freezing since some
+ drivers still don't correctly use freezable timeouts.
+
+---
+ kernel/time/hrtimer.c | 2 +-
+ kernel/time/timer.c | 9 +++++----
+ 2 files changed, 6 insertions(+), 5 deletions(-)
+
+diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c
+index c6ea49693bca..17ad543fbbc4 100644
+--- a/kernel/time/hrtimer.c
++++ b/kernel/time/hrtimer.c
+@@ -2039,7 +2039,7 @@ long __sched schedule_msec_hrtimeout(long timeout)
+ * (yet) better than Hz, as would occur during startup, use regular
+ * timers.
+ */
+- if (jiffs > 4 || hrtimer_resolution >= NSEC_PER_SEC / HZ)
++ if (jiffs > 4 || hrtimer_resolution >= NSEC_PER_SEC / HZ || pm_freezing)
+ return schedule_timeout(jiffs);
+
+ secs = timeout / 1000;
+diff --git a/kernel/time/timer.c b/kernel/time/timer.c
+index 3ab277ba0f44..28509c518461 100644
+--- a/kernel/time/timer.c
++++ b/kernel/time/timer.c
+@@ -43,6 +43,7 @@
+ #include <linux/sched/debug.h>
+ #include <linux/slab.h>
+ #include <linux/compat.h>
++#include <linux/freezer.h>
+
+ #include <linux/uaccess.h>
+ #include <asm/unistd.h>
+@@ -1971,12 +1972,12 @@ void msleep(unsigned int msecs)
+ * Use high resolution timers where the resolution of tick based
+ * timers is inadequate.
+ */
+- if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ) {
++ if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ && !pm_freezing) {
+ while (msecs)
+ msecs = schedule_msec_hrtimeout_uninterruptible(msecs);
+ return;
+ }
+- timeout = msecs_to_jiffies(msecs) + 1;
++ timeout = jiffs + 1;
+
+ while (timeout)
+ timeout = schedule_timeout_uninterruptible(timeout);
+@@ -1993,12 +1994,12 @@ unsigned long msleep_interruptible(unsigned int msecs)
+ int jiffs = msecs_to_jiffies(msecs);
+ unsigned long timeout;
+
+- if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ) {
++ if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ && !pm_freezing) {
+ while (msecs && !signal_pending(current))
+ msecs = schedule_msec_hrtimeout_interruptible(msecs);
+ return msecs;
+ }
+- timeout = msecs_to_jiffies(msecs) + 1;
++ timeout = jiffs + 1;
+
+ while (timeout && !signal_pending(current))
+ timeout = schedule_timeout_interruptible(timeout);
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-0012-Make-threaded-IRQs-optionally-the-default-which-can-.patch b/sys-kernel/linux-sources-redcore/files/5.1-0012-Make-threaded-IRQs-optionally-the-default-which-can-.patch
new file mode 100644
index 00000000..3e40227f
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-0012-Make-threaded-IRQs-optionally-the-default-which-can-.patch
@@ -0,0 +1,67 @@
+From 50ddde6e3c62abd39dc6a3cd5941febed7ad49c3 Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Wed, 7 Dec 2016 21:13:16 +1100
+Subject: [PATCH 13/16] Make threaded IRQs optionally the default which can be
+ disabled.
+
+---
+ kernel/irq/Kconfig | 17 +++++++++++++++++
+ kernel/irq/manage.c | 11 +++++++++++
+ 2 files changed, 28 insertions(+)
+
+diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
+index 5f3e2baefca9..de3e5740679b 100644
+--- a/kernel/irq/Kconfig
++++ b/kernel/irq/Kconfig
+@@ -107,6 +107,23 @@ config GENERIC_IRQ_RESERVATION_MODE
+ config IRQ_FORCED_THREADING
+ bool
+
++config FORCE_IRQ_THREADING
++ bool "Make IRQ threading compulsory"
++ depends on IRQ_FORCED_THREADING
++ default n
++ ---help---
++
++ Make IRQ threading mandatory for any IRQ handlers that support it
++ instead of being optional and requiring the threadirqs kernel
++ parameter. Instead they can be optionally disabled with the
++ nothreadirqs kernel parameter.
++
++ Enabling this may make some architectures not boot with runqueue
++ sharing and MuQSS.
++
++ Enable if you are building for a desktop or low latency system,
++ otherwise say N.
++
+ config SPARSE_IRQ
+ bool "Support sparse irq numbering" if MAY_HAVE_SPARSE_IRQ
+ ---help---
+diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
+index 1401afa0d58a..54394031b536 100644
+--- a/kernel/irq/manage.c
++++ b/kernel/irq/manage.c
+@@ -23,9 +23,20 @@
+ #include "internals.h"
+
+ #ifdef CONFIG_IRQ_FORCED_THREADING
++#ifdef CONFIG_FORCE_IRQ_THREADING
++__read_mostly bool force_irqthreads = true;
++#else
+ __read_mostly bool force_irqthreads;
++#endif
+ EXPORT_SYMBOL_GPL(force_irqthreads);
+
++static int __init setup_noforced_irqthreads(char *arg)
++{
++ force_irqthreads = false;
++ return 0;
++}
++early_param("nothreadirqs", setup_noforced_irqthreads);
++
+ static int __init setup_forced_irqthreads(char *arg)
+ {
+ force_irqthreads = true;
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-0013-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch b/sys-kernel/linux-sources-redcore/files/5.1-0013-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch
new file mode 100644
index 00000000..cd46a360
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-0013-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch
@@ -0,0 +1,81 @@
+From f1b776971e6aa46347f035adfebfd71d5f0930bb Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Wed, 7 Dec 2016 21:23:01 +1100
+Subject: [PATCH 14/16] Reinstate default Hz of 100 in combination with MuQSS
+ and -ck patches.
+
+---
+ kernel/Kconfig.hz | 25 ++++++++++++++++++-------
+ 1 file changed, 18 insertions(+), 7 deletions(-)
+
+diff --git a/kernel/Kconfig.hz b/kernel/Kconfig.hz
+index 2a202a846757..1806fcac8f14 100644
+--- a/kernel/Kconfig.hz
++++ b/kernel/Kconfig.hz
+@@ -4,7 +4,8 @@
+
+ choice
+ prompt "Timer frequency"
+- default HZ_250
++ default HZ_100 if SCHED_MUQSS
++ default HZ_250_NODEF if !SCHED_MUQSS
+ help
+ Allows the configuration of the timer frequency. It is customary
+ to have the timer interrupt run at 1000 Hz but 100 Hz may be more
+@@ -19,11 +20,18 @@ choice
+ config HZ_100
+ bool "100 HZ"
+ help
++ 100 Hz is a suitable choice in combination with MuQSS which does
++ not rely on ticks for rescheduling interrupts, and is not Hz limited
++ for timeouts and sleeps from both the kernel and userspace.
++ This allows us to benefit from the lower overhead and higher
++ throughput of fewer timer ticks.
++
++ Non-MuQSS kernels:
+ 100 Hz is a typical choice for servers, SMP and NUMA systems
+ with lots of processors that may show reduced performance if
+ too many timer interrupts are occurring.
+
+- config HZ_250
++ config HZ_250_NODEF
+ bool "250 HZ"
+ help
+ 250 Hz is a good compromise choice allowing server performance
+@@ -31,7 +39,10 @@ choice
+ on SMP and NUMA systems. If you are going to be using NTSC video
+ or multimedia, selected 300Hz instead.
+
+- config HZ_300
++ 250 Hz is the default choice for the mainline scheduler but not
++ advantageous in combination with MuQSS.
++
++ config HZ_300_NODEF
+ bool "300 HZ"
+ help
+ 300 Hz is a good compromise choice allowing server performance
+@@ -39,7 +50,7 @@ choice
+ on SMP and NUMA systems and exactly dividing by both PAL and
+ NTSC frame rates for video and multimedia work.
+
+- config HZ_1000
++ config HZ_1000_NODEF
+ bool "1000 HZ"
+ help
+ 1000 Hz is the preferred choice for desktop systems and other
+@@ -50,9 +61,9 @@ endchoice
+ config HZ
+ int
+ default 100 if HZ_100
+- default 250 if HZ_250
+- default 300 if HZ_300
+- default 1000 if HZ_1000
++ default 250 if HZ_250_NODEF
++ default 300 if HZ_300_NODEF
++ default 1000 if HZ_1000_NODEF
+
+ config SCHED_HRTICK
+ def_bool HIGH_RES_TIMERS
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-0014-Swap-sucks.patch b/sys-kernel/linux-sources-redcore/files/5.1-0014-Swap-sucks.patch
new file mode 100644
index 00000000..cca606c8
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-0014-Swap-sucks.patch
@@ -0,0 +1,25 @@
+From 2113c0b7c42ba961bcc409c1bf9aca9db747b2b0 Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Sat, 12 Aug 2017 12:02:04 +1000
+Subject: [PATCH 15/16] Swap sucks.
+
+---
+ mm/vmscan.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/mm/vmscan.c b/mm/vmscan.c
+index a815f73ee4d5..4bcbaec19859 100644
+--- a/mm/vmscan.c
++++ b/mm/vmscan.c
+@@ -164,7 +164,7 @@ struct scan_control {
+ /*
+ * From 0 .. 100. Higher means more swappy.
+ */
+-int vm_swappiness = 60;
++int vm_swappiness = 33;
+ /*
+ * The total number of pages which are beyond the high watermark within all
+ * zones.
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-Unknow-SSD-HFM128GDHTNG-8310B-QUIRK_NO_APST.patch b/sys-kernel/linux-sources-redcore/files/5.1-Unknow-SSD-HFM128GDHTNG-8310B-QUIRK_NO_APST.patch
new file mode 100644
index 00000000..073fb752
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-Unknow-SSD-HFM128GDHTNG-8310B-QUIRK_NO_APST.patch
@@ -0,0 +1,19 @@
+diff -Naur linux-4.20.6/drivers/nvme/host/core.c linux-4.20.6-p/drivers/nvme/host/core.c
+--- linux-4.20.6/drivers/nvme/host/core.c 2019-01-31 08:15:47.000000000 +0100
++++ linux-4.20.6-p/drivers/nvme/host/core.c 2019-02-04 22:32:28.182827035 +0100
+@@ -2046,6 +2046,15 @@
+ .vid = 0x1179,
+ .mn = "THNSF5256GPUK TOSHIBA",
+ .quirks = NVME_QUIRK_NO_APST,
++ },
++
++ {
++ /* https://forum.openmandriva.org/t/nvme-ssd-m2-not-seen-by-omlx-4-0/2407
++ * Unknow SSD .. Maybe ADATA/Hynix ( a similar mn from ADTA but vid seems to be Hynix)
++ */
++ .vid = 0x1c5c,
++ .mn = "HFM128GDHTNG-8310B",
++ .quirks = NVME_QUIRK_NO_APST,
+ }
+ };
+
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-acpi-use-kern_warning_even_when_error.patch b/sys-kernel/linux-sources-redcore/files/5.1-acpi-use-kern_warning_even_when_error.patch
new file mode 100644
index 00000000..64c773ab
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-acpi-use-kern_warning_even_when_error.patch
@@ -0,0 +1,18 @@
+diff -Naur linux-5.1/include/acpi/platform/aclinux.h linux-5.1-p/include/acpi/platform/aclinux.h
+--- linux-5.1/include/acpi/platform/aclinux.h 2019-05-06 02:42:58.000000000 +0200
++++ linux-5.1-p/include/acpi/platform/aclinux.h 2019-05-07 09:49:23.980444601 +0200
+@@ -153,12 +153,12 @@
+ #define ACPI_USE_ALTERNATE_PROTOTYPE_acpi_os_get_next_filename
+ #define ACPI_USE_ALTERNATE_PROTOTYPE_acpi_os_close_directory
+
+-#define ACPI_MSG_ERROR KERN_ERR "ACPI Error: "
++#define ACPI_MSG_ERROR KERN_WARNING "ACPI Error: "
+ #define ACPI_MSG_EXCEPTION KERN_ERR "ACPI Exception: "
+ #define ACPI_MSG_WARNING KERN_WARNING "ACPI Warning: "
+ #define ACPI_MSG_INFO KERN_INFO "ACPI: "
+
+-#define ACPI_MSG_BIOS_ERROR KERN_ERR "ACPI BIOS Error (bug): "
++#define ACPI_MSG_BIOS_ERROR KERN_WARNING "ACPI BIOS Error (bug): "
+ #define ACPI_MSG_BIOS_WARNING KERN_WARNING "ACPI BIOS Warning (bug): "
+
+ /*
diff --git a/sys-kernel/linux-sources-redcore/files/redcore-amd64.config b/sys-kernel/linux-sources-redcore/files/5.1-amd64.config
index 288c1279..40628bb6 100644
--- a/sys-kernel/linux-sources-redcore/files/redcore-amd64.config
+++ b/sys-kernel/linux-sources-redcore/files/5.1-amd64.config
@@ -1,54 +1,16 @@
#
# Automatically generated file; DO NOT EDIT.
-# Linux/x86 4.18.5-redcore Kernel Configuration
+# Linux/x86 5.1.15-redcore Kernel Configuration
#
#
-# Compiler: gcc (Gentoo Hardened 7.3.0-r3 p1.4) 7.3.0
+# Compiler: gcc (Gentoo Hardened 8.2.0-r1337 p1.6) 8.2.0
#
-CONFIG_64BIT=y
-CONFIG_X86_64=y
-CONFIG_X86=y
-CONFIG_INSTRUCTION_DECODER=y
-CONFIG_OUTPUT_FORMAT="elf64-x86-64"
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_MMU=y
-CONFIG_ARCH_MMAP_RND_BITS_MIN=28
-CONFIG_ARCH_MMAP_RND_BITS_MAX=32
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_FILTER_PGPROT=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ZONE_DMA32=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_HAVE_INTEL_TXT=y
-CONFIG_X86_64_SMP=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_DYNAMIC_PHYSICAL_MASK=y
-CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_IS_GCC=y
-CONFIG_GCC_VERSION=70300
+CONFIG_GCC_VERSION=80200
CONFIG_CLANG_VERSION=0
+CONFIG_CC_HAS_ASM_GOTO=y
+CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
@@ -56,22 +18,24 @@ CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
+CONFIG_SCHED_MUQSS=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
-# CONFIG_KERNEL_LZ4 is not set
+CONFIG_KERNEL_LZ4=y
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
@@ -83,8 +47,6 @@ CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_WATCH=y
-CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
@@ -103,10 +65,12 @@ CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
+# CONFIG_FORCE_IRQ_THREADING is not set
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
@@ -118,25 +82,33 @@ CONFIG_GENERIC_CMOS_UPDATE=y
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ_COMMON=y
-# CONFIG_HZ_PERIODIC is not set
+CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
-CONFIG_NO_HZ_FULL=y
+# CONFIG_NO_HZ_FULL is not set
+CONFIG_CONTEXT_TRACKING=y
+# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_COUNT=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
+# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
+# CONFIG_PSI is not set
CONFIG_CPU_ISOLATION=y
#
@@ -149,9 +121,6 @@ CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_CONTEXT_TRACKING=y
-# CONFIG_CONTEXT_TRACKING_FORCE is not set
-CONFIG_RCU_NOCB_CPU=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
@@ -162,20 +131,16 @@ CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
-CONFIG_NUMA_BALANCING=y
-CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
+CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_CFS_BANDWIDTH=y
-CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
@@ -183,7 +148,6 @@ CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
@@ -194,7 +158,7 @@ CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
-CONFIG_SCHED_AUTOGROUP=y
+# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
@@ -235,6 +199,7 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
@@ -269,203 +234,47 @@ CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_CRASH_CORE=y
-CONFIG_KEXEC_CORE=y
-CONFIG_HOTPLUG_SMT=y
-# CONFIG_OPROFILE is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_OPROFILE_NMI_TIMER=y
-CONFIG_KPROBES=y
-CONFIG_JUMP_LABEL=y
-# CONFIG_STATIC_KEYS_SELFTEST is not set
-CONFIG_OPTPROBES=y
-CONFIG_KPROBES_ON_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_KRETPROBES=y
-CONFIG_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_KPROBES_ON_FTRACE=y
-CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
-CONFIG_HAVE_NMI=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
-CONFIG_HAVE_USER_RETURN_NOTIFIER=y
-CONFIG_HAVE_PERF_EVENTS_NMI=y
-CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_SECCOMP_FILTER=y
-CONFIG_PLUGIN_HOSTCC="g++"
-CONFIG_HAVE_GCC_PLUGINS=y
-# CONFIG_GCC_PLUGINS is not set
-CONFIG_HAVE_STACKPROTECTOR=y
-CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
-CONFIG_STACKPROTECTOR=y
-CONFIG_STACKPROTECTOR_STRONG=y
-CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_ARCH_SOFT_DIRTY=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
-CONFIG_HAVE_EXIT_THREAD=y
-CONFIG_ARCH_MMAP_RND_BITS=32
-CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS=16
-CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_STACK_VALIDATION=y
-CONFIG_ISA_BUS_API=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_COMPAT_OLD_SIGACTION=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_HAVE_ARCH_VMAP_STACK=y
-CONFIG_VMAP_STACK=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_REFCOUNT=y
-CONFIG_REFCOUNT_FULL=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_MODULE_SIG=y
-# CONFIG_MODULE_SIG_FORCE is not set
-CONFIG_MODULE_SIG_ALL=y
-# CONFIG_MODULE_SIG_SHA1 is not set
-# CONFIG_MODULE_SIG_SHA224 is not set
-# CONFIG_MODULE_SIG_SHA256 is not set
-# CONFIG_MODULE_SIG_SHA384 is not set
-CONFIG_MODULE_SIG_SHA512=y
-CONFIG_MODULE_SIG_HASH="sha512"
-CONFIG_MODULE_COMPRESS=y
-CONFIG_MODULE_COMPRESS_GZIP=y
-# CONFIG_MODULE_COMPRESS_XZ is not set
-# CONFIG_TRIM_UNUSED_KSYMS is not set
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_BLOCK=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_BSGLIB=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_BLK_DEV_ZONED=y
-CONFIG_BLK_DEV_THROTTLING=y
-# CONFIG_BLK_DEV_THROTTLING_LOW is not set
-CONFIG_BLK_CMDLINE_PARSER=y
-CONFIG_BLK_WBT=y
-CONFIG_BLK_WBT_SQ=y
-CONFIG_BLK_WBT_MQ=y
-CONFIG_BLK_DEBUG_FS=y
-# CONFIG_BLK_SED_OPAL is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-CONFIG_ACORN_PARTITION_CUMANA=y
-CONFIG_ACORN_PARTITION_EESOX=y
-CONFIG_ACORN_PARTITION_ICS=y
-CONFIG_ACORN_PARTITION_ADFS=y
-CONFIG_ACORN_PARTITION_POWERTEC=y
-CONFIG_ACORN_PARTITION_RISCIX=y
-CONFIG_AIX_PARTITION=y
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
-CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_EFI_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
-CONFIG_CMDLINE_PARTITION=y
-CONFIG_BLOCK_COMPAT=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_BLK_MQ_RDMA=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_CFQ_GROUP_IOSCHED=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_MQ_IOSCHED_DEADLINE=y
-# CONFIG_MQ_IOSCHED_KYBER is not set
-CONFIG_IOSCHED_BFQ=y
-CONFIG_BFQ_GROUP_IOSCHED=y
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PADATA=y
-CONFIG_ASN1=y
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
-CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
+CONFIG_64BIT=y
+CONFIG_X86_64=y
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_ARCH_MMAP_RND_BITS_MIN=28
+CONFIG_ARCH_MMAP_RND_BITS_MAX=32
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_FILTER_PGPROT=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ZONE_DMA32=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_64_SMP=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_DYNAMIC_PHYSICAL_MASK=y
+CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
-CONFIG_FREEZER=y
#
# Processor type and features
@@ -477,7 +286,7 @@ CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
-CONFIG_INTEL_RDT=y
+CONFIG_X86_CPU_RESCTRL=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
@@ -491,11 +300,11 @@ CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
+# CONFIG_PVH is not set
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_JAILHOUSE_GUEST=y
-CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
@@ -510,6 +319,7 @@ CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
@@ -522,12 +332,15 @@ CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
+CONFIG_SMT_NICE=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
+# CONFIG_RQ_NONE is not set
+# CONFIG_RQ_SMT is not set
+CONFIG_RQ_MC=y
+# CONFIG_RQ_SMP is not set
+# CONFIG_RQ_ALL is not set
+CONFIG_SHARERQ=2
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
@@ -558,10 +371,10 @@ CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
+# CONFIG_X86_CPA_STATISTICS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_AMD_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set
-CONFIG_ARCH_USE_MEMREMAP_PROT=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
@@ -574,74 +387,6 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_HAVE_BOOTMEM_INFO_NODE=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
-# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
-CONFIG_MEMORY_BALLOON=y
-CONFIG_BALLOON_COMPACTION=y
-CONFIG_COMPACTION=y
-CONFIG_MIGRATION=y
-CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
-CONFIG_ARCH_ENABLE_THP_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_MMU_NOTIFIER=y
-CONFIG_KSM=y
-CONFIG_UKSM=y
-# CONFIG_KSM_LEGACY is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_MEMORY_FAILURE=y
-# CONFIG_HWPOISON_INJECT is not set
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
-# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
-CONFIG_ARCH_WANTS_THP_SWAP=y
-CONFIG_THP_SWAP=y
-CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
-CONFIG_CLEANCACHE=y
-CONFIG_FRONTSWAP=y
-CONFIG_CMA=y
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_AREAS=7
-# CONFIG_ZSWAP is not set
-CONFIG_ZPOOL=m
-CONFIG_ZBUD=m
-CONFIG_Z3FOLD=m
-CONFIG_ZSMALLOC=y
-# CONFIG_PGTABLE_MAPPING is not set
-# CONFIG_ZSMALLOC_STAT is not set
-CONFIG_GENERIC_EARLY_IOREMAP=y
-# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
-# CONFIG_IDLE_PAGE_TRACKING is not set
-CONFIG_ARCH_HAS_ZONE_DEVICE=y
-# CONFIG_ZONE_DEVICE is not set
-CONFIG_FRAME_VECTOR=y
-CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
-CONFIG_ARCH_HAS_PKEYS=y
-# CONFIG_PERCPU_STATS is not set
-# CONFIG_GUP_BENCHMARK is not set
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
@@ -662,13 +407,14 @@ CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
CONFIG_SECCOMP=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-CONFIG_HZ_1000=y
-CONFIG_HZ=1000
+CONFIG_HZ_100=y
+# CONFIG_HZ_250_NODEF is not set
+# CONFIG_HZ_300_NODEF is not set
+# CONFIG_HZ_1000_NODEF is not set
+CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
+# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
@@ -693,6 +439,9 @@ CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
+CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
+CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
+CONFIG_ARCH_ENABLE_THP_MIGRATION=y
#
# Power management and ACPI options
@@ -715,6 +464,8 @@ CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+# CONFIG_ENERGY_MODEL is not set
+CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
@@ -755,6 +506,7 @@ CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_NFIT=m
+# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
@@ -766,6 +518,7 @@ CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_DPTF_POWER=m
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
+CONFIG_ACPI_ADXL=y
CONFIG_PMIC_OPREGION=y
# CONFIG_XPOWER_PMIC_OPREGION is not set
# CONFIG_BXT_WC_PMIC_OPREGION is not set
@@ -816,119 +569,306 @@ CONFIG_X86_AMD_FREQ_SENSITIVITY=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_CPU_IDLE_GOV_TEO is not set
CONFIG_INTEL_IDLE=y
#
# Bus options (PCI etc.)
#
-CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_DOMAINS=y
CONFIG_MMCONF_FAM10H=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEAER_INJECT=m
-CONFIG_PCIE_ECRC=y
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-CONFIG_PCIE_PME=y
-CONFIG_PCIE_DPC=y
-CONFIG_PCIE_PTM=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCI_QUIRKS=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCI_REALLOC_ENABLE_AUTO=y
-CONFIG_PCI_STUB=m
-CONFIG_PCI_PF_STUB=m
-CONFIG_PCI_ATS=y
-CONFIG_PCI_LOCKLESS_CONFIG=y
-CONFIG_PCI_IOV=y
-CONFIG_PCI_PRI=y
-CONFIG_PCI_PASID=y
-CONFIG_PCI_LABEL=y
-CONFIG_PCI_HYPERV=m
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_ACPI=y
-CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-CONFIG_HOTPLUG_PCI_CPCI=y
-CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
-CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
-# CONFIG_HOTPLUG_PCI_SHPC is not set
+CONFIG_ISA_DMA_API=y
+CONFIG_AMD_NB=y
+CONFIG_X86_SYSFB=y
#
-# PCI controller drivers
+# Binary Emulations
#
+CONFIG_IA32_EMULATION=y
+CONFIG_X86_X32=y
+CONFIG_COMPAT_32=y
+CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_X86_DEV_DMA_OPS=y
+CONFIG_HAVE_GENERIC_GUP=y
#
-# Cadence PCIe controllers support
+# Firmware Drivers
#
-CONFIG_VMD=m
+CONFIG_EDD=m
+# CONFIG_EDD_OFF is not set
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+CONFIG_FW_CFG_SYSFS=m
+# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
+CONFIG_GOOGLE_FIRMWARE=y
+CONFIG_GOOGLE_SMI=m
+CONFIG_GOOGLE_COREBOOT_TABLE=m
+CONFIG_GOOGLE_MEMCONSOLE=m
+CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY=m
+CONFIG_GOOGLE_FRAMEBUFFER_COREBOOT=m
+CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=m
+CONFIG_GOOGLE_VPD=m
#
-# DesignWare PCI Core Support
+# EFI (Extensible Firmware Interface) Support
#
-# CONFIG_PCIE_DW_PLAT_HOST is not set
-# CONFIG_PCIE_DW_PLAT_EP is not set
+CONFIG_EFI_VARS=m
+CONFIG_EFI_ESRT=y
+CONFIG_EFI_VARS_PSTORE=m
+CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
+CONFIG_EFI_RUNTIME_MAP=y
+# CONFIG_EFI_FAKE_MEMMAP is not set
+CONFIG_EFI_RUNTIME_WRAPPERS=y
+CONFIG_EFI_BOOTLOADER_CONTROL=m
+CONFIG_EFI_CAPSULE_LOADER=m
+CONFIG_EFI_TEST=m
+CONFIG_APPLE_PROPERTIES=y
+CONFIG_RESET_ATTACK_MITIGATION=y
+CONFIG_UEFI_CPER=y
+CONFIG_UEFI_CPER_X86=y
+CONFIG_EFI_DEV_PATH_PARSER=y
+CONFIG_EFI_EARLYCON=y
#
-# PCI Endpoint
+# Tegra firmware driver
#
-CONFIG_PCI_ENDPOINT=y
-CONFIG_PCI_ENDPOINT_CONFIGFS=y
-# CONFIG_PCI_EPF_TEST is not set
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_IRQFD=y
+CONFIG_HAVE_KVM_IRQ_ROUTING=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
+CONFIG_KVM_VFIO=y
+CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
+CONFIG_KVM_COMPAT=y
+CONFIG_HAVE_KVM_IRQ_BYPASS=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_AMD_SEV=y
+# CONFIG_KVM_MMU_AUDIT is not set
+CONFIG_VHOST_NET=m
+CONFIG_VHOST_SCSI=m
+CONFIG_VHOST_VSOCK=m
+CONFIG_VHOST=m
+# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
-# PCI switch controller drivers
+# General architecture-dependent options
#
-CONFIG_PCI_SW_SWITCHTEC=m
-CONFIG_ISA_DMA_API=y
-CONFIG_AMD_NB=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_CARDBUS=y
+CONFIG_CRASH_CORE=y
+CONFIG_KEXEC_CORE=y
+CONFIG_HOTPLUG_SMT=y
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
+# CONFIG_STATIC_KEYS_SELFTEST is not set
+CONFIG_OPTPROBES=y
+CONFIG_KPROBES_ON_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_KRETPROBES=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_KPROBES_ON_FTRACE=y
+CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
+CONFIG_HAVE_NMI=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
+CONFIG_ARCH_HAS_SET_MEMORY=y
+CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
+CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_RSEQ=y
+CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
+CONFIG_HAVE_RCU_TABLE_FREE=y
+CONFIG_HAVE_RCU_TABLE_INVALIDATE=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_STACKLEAK=y
+CONFIG_HAVE_STACKPROTECTOR=y
+CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
+CONFIG_STACKPROTECTOR=y
+CONFIG_STACKPROTECTOR_STRONG=y
+CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_MOVE_PMD=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
+CONFIG_HAVE_ARCH_HUGE_VMAP=y
+CONFIG_HAVE_ARCH_SOFT_DIRTY=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
+CONFIG_HAVE_EXIT_THREAD=y
+CONFIG_ARCH_MMAP_RND_BITS=32
+CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS=16
+CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
+CONFIG_HAVE_COPY_THREAD_TLS=y
+CONFIG_HAVE_STACK_VALIDATION=y
+CONFIG_HAVE_RELIABLE_STACKTRACE=y
+CONFIG_ISA_BUS_API=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_COMPAT_OLD_SIGACTION=y
+CONFIG_64BIT_TIME=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_HAVE_ARCH_VMAP_STACK=y
+CONFIG_VMAP_STACK=y
+CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
+CONFIG_STRICT_KERNEL_RWX=y
+CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
+CONFIG_STRICT_MODULE_RWX=y
+CONFIG_ARCH_HAS_REFCOUNT=y
+CONFIG_REFCOUNT_FULL=y
+CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
+CONFIG_ARCH_USE_MEMREMAP_PROT=y
#
-# PC-card bridges
+# GCOV-based kernel profiling
#
-CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-CONFIG_PD6729=m
-CONFIG_I82092=m
-CONFIG_PCCARD_NONSTATIC=y
-CONFIG_RAPIDIO=y
-CONFIG_RAPIDIO_TSI721=y
-CONFIG_RAPIDIO_DISC_TIMEOUT=30
-CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
-CONFIG_RAPIDIO_DMA_ENGINE=y
-# CONFIG_RAPIDIO_DEBUG is not set
-CONFIG_RAPIDIO_ENUM_BASIC=m
-CONFIG_RAPIDIO_CHMAN=m
-CONFIG_RAPIDIO_MPORT_CDEV=m
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_PLUGIN_HOSTCC="g++"
+CONFIG_HAVE_GCC_PLUGINS=y
+# CONFIG_GCC_PLUGINS is not set
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_MODULE_SIG=y
+# CONFIG_MODULE_SIG_FORCE is not set
+CONFIG_MODULE_SIG_ALL=y
+# CONFIG_MODULE_SIG_SHA1 is not set
+# CONFIG_MODULE_SIG_SHA224 is not set
+# CONFIG_MODULE_SIG_SHA256 is not set
+# CONFIG_MODULE_SIG_SHA384 is not set
+CONFIG_MODULE_SIG_SHA512=y
+CONFIG_MODULE_SIG_HASH="sha512"
+CONFIG_MODULE_COMPRESS=y
+CONFIG_MODULE_COMPRESS_GZIP=y
+# CONFIG_MODULE_COMPRESS_XZ is not set
+# CONFIG_TRIM_UNUSED_KSYMS is not set
+CONFIG_MODULES_TREE_LOOKUP=y
+CONFIG_BLOCK=y
+CONFIG_BLK_SCSI_REQUEST=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLK_DEV_ZONED=y
+CONFIG_BLK_DEV_THROTTLING=y
+# CONFIG_BLK_DEV_THROTTLING_LOW is not set
+CONFIG_BLK_CMDLINE_PARSER=y
+CONFIG_BLK_WBT=y
+# CONFIG_BLK_CGROUP_IOLATENCY is not set
+CONFIG_BLK_WBT_MQ=y
+CONFIG_BLK_DEBUG_FS=y
+CONFIG_BLK_DEBUG_FS_ZONED=y
+# CONFIG_BLK_SED_OPAL is not set
#
-# RapidIO Switch drivers
+# Partition Types
#
-CONFIG_RAPIDIO_TSI57X=y
-CONFIG_RAPIDIO_CPS_XX=y
-CONFIG_RAPIDIO_TSI568=y
-CONFIG_RAPIDIO_CPS_GEN2=y
-CONFIG_RAPIDIO_RXS_GEN3=m
-CONFIG_X86_SYSFB=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ACORN_PARTITION=y
+CONFIG_ACORN_PARTITION_CUMANA=y
+CONFIG_ACORN_PARTITION_EESOX=y
+CONFIG_ACORN_PARTITION_ICS=y
+CONFIG_ACORN_PARTITION_ADFS=y
+CONFIG_ACORN_PARTITION_POWERTEC=y
+CONFIG_ACORN_PARTITION_RISCIX=y
+CONFIG_AIX_PARTITION=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+CONFIG_SGI_PARTITION=y
+CONFIG_ULTRIX_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_SYSV68_PARTITION=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_BLOCK_COMPAT=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_MQ_VIRTIO=y
+CONFIG_BLK_MQ_RDMA=y
+CONFIG_BLK_PM=y
#
-# Executable file formats / Emulations
+# IO Schedulers
+#
+CONFIG_MQ_IOSCHED_DEADLINE=y
+# CONFIG_MQ_IOSCHED_KYBER is not set
+CONFIG_IOSCHED_BFQ=y
+CONFIG_BFQ_GROUP_IOSCHED=y
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+CONFIG_ASN1=y
+CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
+CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
+CONFIG_FREEZER=y
+
+#
+# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
@@ -937,18 +877,77 @@ CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
-CONFIG_IA32_EMULATION=y
-CONFIG_IA32_AOUT=y
-CONFIG_X86_X32=y
-CONFIG_COMPAT_32=y
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_X86_DEV_DMA_OPS=y
+
+#
+# Memory Management options
+#
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_HAVE_BOOTMEM_INFO_NODE=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MEMORY_BALLOON=y
+CONFIG_BALLOON_COMPACTION=y
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+CONFIG_KSM=y
+CONFIG_UKSM=y
+# CONFIG_KSM_LEGACY is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_MEMORY_FAILURE=y
+# CONFIG_HWPOISON_INJECT is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_ARCH_WANTS_THP_SWAP=y
+CONFIG_THP_SWAP=y
+CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
+CONFIG_CLEANCACHE=y
+CONFIG_FRONTSWAP=y
+CONFIG_CMA=y
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_AREAS=7
+# CONFIG_ZSWAP is not set
+CONFIG_ZPOOL=m
+CONFIG_ZBUD=m
+CONFIG_Z3FOLD=m
+CONFIG_ZSMALLOC=y
+# CONFIG_PGTABLE_MAPPING is not set
+# CONFIG_ZSMALLOC_STAT is not set
+CONFIG_GENERIC_EARLY_IOREMAP=y
+# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
+# CONFIG_IDLE_PAGE_TRACKING is not set
+CONFIG_ARCH_HAS_ZONE_DEVICE=y
+# CONFIG_ZONE_DEVICE is not set
+CONFIG_FRAME_VECTOR=y
+CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
+CONFIG_ARCH_HAS_PKEYS=y
+# CONFIG_PERCPU_STATS is not set
+# CONFIG_GUP_BENCHMARK is not set
+CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
+CONFIG_SKB_EXTENSIONS=y
#
# Networking options
@@ -956,6 +955,7 @@ CONFIG_NET_EGRESS=y
CONFIG_PACKET=m
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=m
+CONFIG_UNIX_SCM=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
# CONFIG_TLS_DEVICE is not set
@@ -963,6 +963,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
+# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
@@ -972,6 +973,7 @@ CONFIG_NET_KEY_MIGRATE=y
CONFIG_SMC=m
CONFIG_SMC_DIAG=m
CONFIG_XDP_SOCKETS=y
+# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
@@ -1082,6 +1084,7 @@ CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_LOG_NETDEV=m
@@ -1095,7 +1098,7 @@ CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
-CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
@@ -1115,17 +1118,14 @@ CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
-CONFIG_NF_NAT_PROTO_DCCP=y
-CONFIG_NF_NAT_PROTO_UDPLITE=y
-CONFIG_NF_NAT_PROTO_SCTP=y
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
+CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
-CONFIG_NF_OSF=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_SET=m
CONFIG_NF_TABLES_INET=y
@@ -1140,6 +1140,7 @@ CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
+# CONFIG_NFT_TUNNEL is not set
CONFIG_NFT_OBJREF=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
@@ -1149,7 +1150,10 @@ CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
+# CONFIG_NFT_XFRM is not set
CONFIG_NFT_SOCKET=m
+# CONFIG_NFT_OSF is not set
+# CONFIG_NFT_TPROXY is not set
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
@@ -1315,7 +1319,6 @@ CONFIG_IP_VS_PE_SIP=m
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
@@ -1329,13 +1332,7 @@ CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_NFT_CHAIN_NAT_IPV4=m
-CONFIG_NF_NAT_MASQUERADE_IPV4=y
-CONFIG_NFT_MASQ_IPV4=m
-CONFIG_NFT_REDIR_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
@@ -1363,15 +1360,10 @@ CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
-CONFIG_NF_DEFRAG_IPV6=m
-CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
-CONFIG_NFT_CHAIN_NAT_IPV6=m
-CONFIG_NFT_MASQ_IPV6=m
-CONFIG_NFT_REDIR_IPV6=m
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
@@ -1379,8 +1371,6 @@ CONFIG_NF_FLOW_TABLE_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_NF_NAT_MASQUERADE_IPV6=y
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -1402,6 +1392,7 @@ CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_DEFRAG_IPV6=m
#
# DECnet: Netfilter Configuration
@@ -1489,7 +1480,9 @@ CONFIG_NET_DSA_TAG_BRCM=y
CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
+CONFIG_NET_DSA_TAG_GSWIP=y
CONFIG_NET_DSA_TAG_KSZ=y
+CONFIG_NET_DSA_TAG_KSZ9477=y
CONFIG_NET_DSA_TAG_LAN9303=y
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_DSA_TAG_TRAILER=y
@@ -1546,15 +1539,19 @@ CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_CBS=m
+# CONFIG_NET_SCH_ETF is not set
+# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
+# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
+# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
@@ -1623,6 +1620,7 @@ CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_BATMAN_ADV_DEBUGFS=y
# CONFIG_BATMAN_ADV_DEBUG is not set
+# CONFIG_BATMAN_ADV_TRACING is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
@@ -1692,7 +1690,6 @@ CONFIG_CAN_VXCAN=m
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
-CONFIG_CAN_LEDS=y
CONFIG_CAN_JANZ_ICAN3=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
@@ -1725,13 +1722,14 @@ CONFIG_CAN_MCP251X=m
#
# CAN USB interfaces
#
+CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB2=m
CONFIG_CAN_GS_USB=m
CONFIG_CAN_KVASER_USB=m
-CONFIG_CAN_PEAK_USB=m
-CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_MCBA_USB=m
+CONFIG_CAN_PEAK_USB=m
+# CONFIG_CAN_UCAN is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
@@ -1770,6 +1768,7 @@ CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
+# CONFIG_BT_HCIUART_RTL is not set
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
@@ -1784,6 +1783,7 @@ CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_BT_WILINK=m
+# CONFIG_BT_MTKUART is not set
CONFIG_BT_HCIRSI=m
CONFIG_AF_RXRPC=m
CONFIG_AF_RXRPC_IPV6=y
@@ -1817,7 +1817,6 @@ CONFIG_LIB80211_CRYPT_TKIP=m
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
-CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
@@ -1890,14 +1889,118 @@ CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
-CONFIG_NET_DEVLINK=m
-CONFIG_MAY_USE_DEVLINK=m
+CONFIG_NET_SOCK_MSG=y
+# CONFIG_NET_DEVLINK is not set
CONFIG_FAILOVER=m
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
+CONFIG_HAVE_EISA=y
+# CONFIG_EISA is not set
+CONFIG_HAVE_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIE_ECRC=y
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_PCIE_DPC=y
+CONFIG_PCIE_PTM=y
+# CONFIG_PCIE_BW is not set
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCI_REALLOC_ENABLE_AUTO=y
+CONFIG_PCI_STUB=m
+CONFIG_PCI_PF_STUB=m
+CONFIG_PCI_ATS=y
+CONFIG_PCI_LOCKLESS_CONFIG=y
+CONFIG_PCI_IOV=y
+CONFIG_PCI_PRI=y
+CONFIG_PCI_PASID=y
+CONFIG_PCI_LABEL=y
+CONFIG_PCI_HYPERV=m
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_ACPI=y
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+CONFIG_HOTPLUG_PCI_CPCI=y
+CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
+CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+#
+# PCI controller drivers
+#
+
+#
+# Cadence PCIe controllers support
+#
+CONFIG_VMD=m
+
+#
+# DesignWare PCI Core Support
+#
+# CONFIG_PCIE_DW_PLAT_HOST is not set
+# CONFIG_PCIE_DW_PLAT_EP is not set
+# CONFIG_PCI_MESON is not set
+
+#
+# PCI Endpoint
+#
+CONFIG_PCI_ENDPOINT=y
+CONFIG_PCI_ENDPOINT_CONFIGFS=y
+# CONFIG_PCI_EPF_TEST is not set
+
+#
+# PCI switch controller drivers
+#
+CONFIG_PCI_SW_SWITCHTEC=m
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_RAPIDIO=y
+CONFIG_RAPIDIO_TSI721=y
+CONFIG_RAPIDIO_DISC_TIMEOUT=30
+CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
+CONFIG_RAPIDIO_DMA_ENGINE=y
+# CONFIG_RAPIDIO_DEBUG is not set
+CONFIG_RAPIDIO_ENUM_BASIC=m
+CONFIG_RAPIDIO_CHMAN=m
+CONFIG_RAPIDIO_MPORT_CDEV=m
+
+#
+# RapidIO Switch drivers
+#
+CONFIG_RAPIDIO_TSI57X=y
+CONFIG_RAPIDIO_CPS_XX=y
+CONFIG_RAPIDIO_TSI568=y
+CONFIG_RAPIDIO_CPS_GEN2=y
+CONFIG_RAPIDIO_RXS_GEN3=m
#
# Generic Driver Options
@@ -1926,6 +2029,7 @@ CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
+CONFIG_REGMAP_SLIMBUS=m
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_W1=m
@@ -1934,24 +2038,24 @@ CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
-# CONFIG_DMA_CMA is not set
#
# Bus devices
#
CONFIG_CONNECTOR=m
+# CONFIG_GNSS is not set
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_CMDLINE_PARTS=m
CONFIG_MTD_AR7_PARTS=m
#
# Partition parsers
#
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
#
# User Modules And Translation Layers
@@ -1996,6 +2100,7 @@ CONFIG_MTD_ABSENT=m
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
@@ -2007,10 +2112,8 @@ CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
CONFIG_MTD_PCMCIA=m
# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
-CONFIG_MTD_GPIO_ADDR=m
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m
-CONFIG_MTD_LATCH_ADDR=m
#
# Self-contained MTD device drivers
@@ -2057,10 +2160,10 @@ CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_NAND_DOCG4=m
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_SPI_NAND is not set
#
# LPDDR & LPDDR2 PCM memory drivers
@@ -2068,8 +2171,8 @@ CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
CONFIG_MTD_SPI_NOR=m
-CONFIG_MTD_MT81xx_NOR=m
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
+CONFIG_SPI_MTK_QUADSPI=m
CONFIG_SPI_INTEL_SPI=m
CONFIG_SPI_INTEL_SPI_PCI=m
CONFIG_SPI_INTEL_SPI_PLATFORM=m
@@ -2134,7 +2237,6 @@ CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
CONFIG_ZRAM_WRITEBACK=y
# CONFIG_ZRAM_MEMORY_TRACKING is not set
-CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
@@ -2165,11 +2267,13 @@ CONFIG_BLK_DEV_NVME=y
CONFIG_NVME_FABRICS=m
CONFIG_NVME_RDMA=m
CONFIG_NVME_FC=m
+CONFIG_NVME_TCP=m
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_RDMA=m
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
+CONFIG_NVME_TARGET_TCP=m
#
# Misc devices
@@ -2201,6 +2305,7 @@ CONFIG_LATTICE_ECP3_CONFIG=m
CONFIG_SRAM=y
CONFIG_PCI_ENDPOINT_TEST=m
CONFIG_MISC_RTSX=m
+CONFIG_PVPANIC=m
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m
@@ -2214,6 +2319,7 @@ CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_EEPROM_93XX46=m
CONFIG_EEPROM_IDT_89HPESX=m
+CONFIG_EEPROM_EE1004=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
@@ -2231,6 +2337,7 @@ CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
CONFIG_INTEL_MEI_TXE=m
+CONFIG_INTEL_MEI_HDCP=m
CONFIG_VMWARE_VMCI=m
#
@@ -2280,8 +2387,10 @@ CONFIG_VHOST_RING=m
CONFIG_GENWQE=m
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
CONFIG_ECHO=m
+CONFIG_MISC_ALCOR_PCI=m
CONFIG_MISC_RTSX_PCI=m
CONFIG_MISC_RTSX_USB=m
+CONFIG_HABANA_AI=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -2293,7 +2402,6 @@ CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
-# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y
#
@@ -2372,10 +2480,14 @@ CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
CONFIG_SCSI_UFS_DWC_TC_PCI=m
CONFIG_SCSI_UFSHCD_PLATFORM=m
+CONFIG_SCSI_UFS_CDNS_PLATFORM=m
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=m
+# CONFIG_SCSI_UFS_BSG is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
+CONFIG_SCSI_MYRB=m
+CONFIG_SCSI_MYRS=m
CONFIG_VMWARE_PVSCSI=m
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
@@ -2430,10 +2542,6 @@ CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
-CONFIG_SCSI_OSD_DPRINT_SENSE=1
-# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
@@ -2545,7 +2653,6 @@ CONFIG_BCACHE=m
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_MQ_DEFAULT is not set
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
@@ -2620,6 +2727,7 @@ CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
+CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=m
CONFIG_IPVTAP=m
CONFIG_VXLAN=m
@@ -2702,15 +2810,20 @@ CONFIG_B53_SPI_DRIVER=m
CONFIG_B53_MDIO_DRIVER=m
CONFIG_B53_MMAP_DRIVER=m
CONFIG_B53_SRAB_DRIVER=m
+CONFIG_B53_SERDES=m
+# CONFIG_NET_DSA_BCM_SF2 is not set
CONFIG_NET_DSA_LOOP=m
+CONFIG_NET_DSA_LANTIQ_GSWIP=m
CONFIG_NET_DSA_MT7530=m
CONFIG_NET_DSA_MV88E6060=m
-CONFIG_MICROCHIP_KSZ=m
-CONFIG_MICROCHIP_KSZ_SPI_DRIVER=m
+CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=m
+CONFIG_NET_DSA_MICROCHIP_KSZ9477=m
+CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=m
CONFIG_NET_DSA_MV88E6XXX=m
CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
CONFIG_NET_DSA_MV88E6XXX_PTP=y
CONFIG_NET_DSA_QCA8K=m
+# CONFIG_NET_DSA_REALTEK_SMI is not set
CONFIG_NET_DSA_SMSC_LAN9303=m
CONFIG_NET_DSA_SMSC_LAN9303_I2C=m
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m
@@ -2756,19 +2869,22 @@ CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
+# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_TIGON3_HWMON=y
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
+# CONFIG_SYSTEMPORT is not set
CONFIG_BNXT=m
CONFIG_BNXT_SRIOV=y
CONFIG_BNXT_FLOWER_OFFLOAD=y
CONFIG_BNXT_DCB=y
+CONFIG_BNXT_HWMON=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
-CONFIG_NET_CADENCE=y
+CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=m
CONFIG_MACB_USE_HWSTAMP=y
CONFIG_MACB_PCI=m
@@ -2815,6 +2931,10 @@ CONFIG_SUNDANCE=m
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
+CONFIG_BE2NET_BE2=y
+CONFIG_BE2NET_BE3=y
+CONFIG_BE2NET_LANCER=y
+CONFIG_BE2NET_SKYHAWK=y
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=m
@@ -2837,16 +2957,16 @@ CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
+CONFIG_IXGBE_IPSEC=y
CONFIG_IXGBEVF=m
+CONFIG_IXGBEVF_IPSEC=y
CONFIG_I40E=m
CONFIG_I40E_DCB=y
+CONFIG_IAVF=m
CONFIG_I40EVF=m
CONFIG_ICE=m
CONFIG_FM10K=m
-CONFIG_NET_VENDOR_EXAR=y
-CONFIG_S2IO=m
-CONFIG_VXGE=m
-# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_IGC=m
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
@@ -2888,7 +3008,6 @@ CONFIG_ENCX24J600=m
CONFIG_LAN743X=m
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_MSCC_OCELOT_SWITCH=m
-CONFIG_MSCC_OCELOT_SWITCH_OCELOT=m
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
@@ -2896,12 +3015,17 @@ CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
+CONFIG_NET_VENDOR_NETERION=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NFP=m
# CONFIG_NFP_APP_FLOWER is not set
CONFIG_NFP_APP_ABM_NIC=y
# CONFIG_NFP_DEBUG is not set
CONFIG_NET_VENDOR_NI=y
+CONFIG_NI_XGE_MANAGEMENT_ENET=m
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=m
CONFIG_NE2K_PCI=m
@@ -2910,7 +3034,7 @@ CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
-CONFIG_NET_PACKET_ENGINE=y
+CONFIG_NET_VENDOR_PACKET_ENGINES=y
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
@@ -2984,6 +3108,7 @@ CONFIG_DWC_XLGMAC_PCI=m
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_NET_VENDOR_TI=y
+# CONFIG_TI_CPSW_PHY_SEL is not set
CONFIG_TI_CPSW_ALE=m
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VIA=y
@@ -3009,6 +3134,7 @@ CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_NET_SB1000=m
CONFIG_MDIO_DEVICE=m
CONFIG_MDIO_BUS=m
+# CONFIG_MDIO_BCM_UNIMAC is not set
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_CAVIUM=m
CONFIG_MDIO_GPIO=m
@@ -3127,6 +3253,7 @@ CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_USB_NET_CH9200=m
+CONFIG_USB_NET_AQC111=m
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ADM8211=m
@@ -3299,7 +3426,15 @@ CONFIG_MWL8K=m
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=m
CONFIG_MT76_CORE=m
+CONFIG_MT76_LEDS=y
+CONFIG_MT76x02_LIB=m
+CONFIG_MT76x0_COMMON=m
+# CONFIG_MT76x0U is not set
+CONFIG_MT76x0E=m
+CONFIG_MT76x2_COMMON=m
CONFIG_MT76x2E=m
+# CONFIG_MT76x2U is not set
+CONFIG_MT7603E=m
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
@@ -3377,11 +3512,12 @@ CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_QTNFMAC=m
-CONFIG_QTNFMAC_PEARL_PCIE=m
+CONFIG_QTNFMAC_PCIE=m
CONFIG_PCMCIA_RAYCS=m
CONFIG_PCMCIA_WL3501=m
# CONFIG_MAC80211_HWSIM is not set
CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_VIRT_WIFI=m
#
# WiMAX Wireless Broadband devices
@@ -3422,6 +3558,7 @@ CONFIG_IEEE802154_ADF7242=m
CONFIG_IEEE802154_CA8210=m
# CONFIG_IEEE802154_CA8210_DEBUGFS is not set
CONFIG_IEEE802154_MCR20A=m
+# CONFIG_IEEE802154_HWSIM is not set
CONFIG_VMXNET3=m
CONFIG_FUJITSU_ES=m
CONFIG_THUNDERBOLT_NET=m
@@ -3520,13 +3657,6 @@ CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
CONFIG_GIGASET_BASE=m
@@ -3554,8 +3684,8 @@ CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
CONFIG_NVM=y
-# CONFIG_NVM_DEBUG is not set
CONFIG_NVM_PBLK=m
+# CONFIG_NVM_PBLK_DEBUG is not set
#
# Input device support
@@ -3686,10 +3816,12 @@ CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879_SPI=m
+# CONFIG_TOUCHSCREEN_ADC is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
CONFIG_TOUCHSCREEN_BU21013=m
+# CONFIG_TOUCHSCREEN_BU21029 is not set
CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=m
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
@@ -3783,6 +3915,7 @@ CONFIG_INPUT_AD714X_SPI=m
CONFIG_INPUT_ARIZONA_HAPTICS=m
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_E3X0_BUTTON=m
+CONFIG_INPUT_MSM_VIBRATOR=m
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_MAX77693_HAPTIC=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
@@ -3853,6 +3986,7 @@ CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=m
+CONFIG_SERIO_OLPC_APSP=m
CONFIG_HYPERV_KEYBOARD=m
CONFIG_SERIO_GPIO_PS2=m
CONFIG_USERIO=m
@@ -3890,6 +4024,7 @@ CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=m
+CONFIG_LDISC_AUTOLOAD=y
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
@@ -3954,6 +4089,7 @@ CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
+CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
@@ -3968,7 +4104,6 @@ CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
-CONFIG_R3964=m
CONFIG_APPLICOM=m
#
@@ -4006,6 +4141,7 @@ CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_XILLYBUS=m
CONFIG_XILLYBUS_PCIE=m
+# CONFIG_RANDOM_TRUST_CPU is not set
#
# I2C support
@@ -4049,6 +4185,7 @@ CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_NVIDIA_GPU=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
@@ -4101,6 +4238,9 @@ CONFIG_I2C_SLAVE_EEPROM=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_I3C=m
+CONFIG_CDNS_I3C_MASTER=m
+CONFIG_DW_I3C_MASTER=m
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@@ -4119,6 +4259,7 @@ CONFIG_SPI_DW_PCI=m
CONFIG_SPI_DW_MID_DMA=y
CONFIG_SPI_DW_MMIO=m
CONFIG_SPI_DLN2=m
+CONFIG_SPI_NXP_FLEXSPI=m
CONFIG_SPI_GPIO=m
CONFIG_SPI_LM70_LLP=m
CONFIG_SPI_OC_TINY=m
@@ -4126,6 +4267,8 @@ CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
CONFIG_SPI_ROCKCHIP=m
CONFIG_SPI_SC18IS602=m
+CONFIG_SPI_SIFIVE=m
+CONFIG_SPI_MXIC=m
CONFIG_SPI_XCOMM=m
CONFIG_SPI_XILINX=m
CONFIG_SPI_ZYNQMP_GQSPI=m
@@ -4153,6 +4296,7 @@ CONFIG_HSI_BOARDINFO=y
CONFIG_HSI_CHAR=m
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
+# CONFIG_NTP_PPS is not set
#
# PPS clients support
@@ -4187,6 +4331,7 @@ CONFIG_PINCTRL_CANNONLAKE=m
CONFIG_PINCTRL_CEDARFORK=m
CONFIG_PINCTRL_DENVERTON=m
CONFIG_PINCTRL_GEMINILAKE=m
+# CONFIG_PINCTRL_ICELAKE is not set
CONFIG_PINCTRL_LEWISBURG=m
CONFIG_PINCTRL_SUNRISEPOINT=m
CONFIG_GPIOLIB=y
@@ -4210,7 +4355,9 @@ CONFIG_GPIO_LYNXPOINT=y
CONFIG_GPIO_MB86S7X=m
CONFIG_GPIO_MENZ127=m
CONFIG_GPIO_MOCKUP=m
+CONFIG_GPIO_SIOX=m
CONFIG_GPIO_VX855=m
+CONFIG_GPIO_AMD_FCH=m
#
# Port-mapped I/O GPIO drivers
@@ -4245,6 +4392,7 @@ CONFIG_GPIO_LP3943=m
CONFIG_GPIO_LP873X=m
CONFIG_GPIO_TPS65086=m
CONFIG_GPIO_TPS65912=m
+CONFIG_GPIO_TQMX86=m
CONFIG_GPIO_UCB1400=m
CONFIG_GPIO_WHISKEY_COVE=m
CONFIG_GPIO_WM831X=m
@@ -4300,7 +4448,6 @@ CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2438=m
-CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
@@ -4315,6 +4462,7 @@ CONFIG_GENERIC_ADC_BATTERY=m
CONFIG_WM831X_BACKUP=m
CONFIG_WM831X_POWER=m
# CONFIG_TEST_POWER is not set
+# CONFIG_CHARGER_ADP5061 is not set
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
@@ -4355,6 +4503,7 @@ CONFIG_CHARGER_SMB347=m
CONFIG_BATTERY_GAUGE_LTC2941=m
CONFIG_BATTERY_RT5033=m
CONFIG_CHARGER_RT9455=m
+# CONFIG_CHARGER_CROS_USBPD is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
@@ -4434,6 +4583,7 @@ CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MAX31790=m
CONFIG_SENSORS_MCP3021=m
+# CONFIG_SENSORS_MLXREG_FAN is not set
CONFIG_SENSORS_TC654=m
CONFIG_SENSORS_MENF21BMC_HWMON=m
CONFIG_SENSORS_ADCXX=m
@@ -4460,6 +4610,9 @@ CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
+# CONFIG_SENSORS_NPCM7XX is not set
+CONFIG_SENSORS_OCC_P8_I2C=m
+CONFIG_SENSORS_OCC=y
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
@@ -4551,6 +4704,10 @@ CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_CLOCK_THERMAL=y
CONFIG_DEVFREQ_THERMAL=y
# CONFIG_THERMAL_EMULATION is not set
+
+#
+# Intel thermal drivers
+#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
@@ -4580,11 +4737,13 @@ CONFIG_DA9052_WATCHDOG=m
CONFIG_DA9063_WATCHDOG=m
CONFIG_DA9062_WATCHDOG=m
CONFIG_MENF21BMC_WATCHDOG=m
+# CONFIG_MENZ069_WATCHDOG is not set
CONFIG_WDAT_WDT=m
CONFIG_WM831X_WATCHDOG=m
CONFIG_XILINX_WATCHDOG=m
CONFIG_ZIIRAVE_WATCHDOG=m
CONFIG_RAVE_SP_WATCHDOG=m
+CONFIG_MLX_WDT=m
CONFIG_CADENCE_WATCHDOG=m
CONFIG_DW_WATCHDOG=m
CONFIG_MAX63XX_WATCHDOG=m
@@ -4617,6 +4776,7 @@ CONFIG_60XX_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
+CONFIG_TQMX86_WDT=m
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
@@ -4658,7 +4818,6 @@ CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
-# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
@@ -4683,9 +4842,8 @@ CONFIG_MFD_BD9571MWV=m
CONFIG_MFD_AXP20X=m
CONFIG_MFD_AXP20X_I2C=m
CONFIG_MFD_CROS_EC=m
-CONFIG_MFD_CROS_EC_I2C=m
-CONFIG_MFD_CROS_EC_SPI=m
# CONFIG_MFD_CROS_EC_CHARDEV is not set
+# CONFIG_MFD_MADERA is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9062=m
@@ -4741,6 +4899,7 @@ CONFIG_MFD_TPS65912_I2C=m
CONFIG_MFD_TPS65912_SPI=y
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=m
+CONFIG_MFD_TQMX86=m
CONFIG_MFD_VX855=m
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=m
@@ -4836,6 +4995,7 @@ CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_IR_IMON_DECODER=m
+CONFIG_IR_RCMM_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
@@ -4855,6 +5015,7 @@ CONFIG_RC_LOOPBACK=m
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_SIR=m
+CONFIG_RC_XBOX_DVD=m
CONFIG_MEDIA_SUPPORT=m
#
@@ -4870,12 +5031,12 @@ CONFIG_MEDIA_CEC_RC=y
# CONFIG_CEC_PIN_ERROR_INJ is not set
CONFIG_MEDIA_CONTROLLER=y
CONFIG_MEDIA_CONTROLLER_DVB=y
+CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_PCI_SKELETON=m
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_V4L2_FLASH_LED_CLASS=m
@@ -5019,7 +5180,6 @@ CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
-CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
@@ -5082,6 +5242,7 @@ CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set
CONFIG_VIDEO_IVTV_ALSA=m
CONFIG_VIDEO_FB_IVTV=m
+# CONFIG_VIDEO_FB_IVTV_FORCE_PAT is not set
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m
@@ -5144,15 +5305,17 @@ CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_VIDEO_CADENCE=y
CONFIG_VIDEO_CADENCE_CSI2RX=m
CONFIG_VIDEO_CADENCE_CSI2TX=m
-CONFIG_SOC_CAMERA=m
-CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_VIDEO_ASPEED=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_VIDEO_SH_VEU=m
# CONFIG_V4L_TEST_DRIVERS is not set
CONFIG_DVB_PLATFORM_DRIVERS=y
CONFIG_CEC_PLATFORM_DRIVERS=y
+# CONFIG_VIDEO_CROS_EC_CEC is not set
CONFIG_CEC_GPIO=m
+CONFIG_VIDEO_SECO_CEC=m
+# CONFIG_VIDEO_SECO_RC is not set
CONFIG_SDR_PLATFORM_DRIVERS=y
#
@@ -5279,7 +5442,6 @@ CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_OV7640=m
CONFIG_VIDEO_OV7670=m
-CONFIG_VIDEO_MT9M111=m
CONFIG_VIDEO_MT9V011=m
#
@@ -5307,24 +5469,6 @@ CONFIG_VIDEO_SAA6752HS=m
CONFIG_VIDEO_M52790=m
#
-# Sensors used on soc_camera driver
-#
-
-#
-# soc_camera sensor drivers
-#
-CONFIG_SOC_CAMERA_MT9M001=m
-CONFIG_SOC_CAMERA_MT9M111=m
-CONFIG_SOC_CAMERA_MT9T112=m
-CONFIG_SOC_CAMERA_MT9V022=m
-CONFIG_SOC_CAMERA_OV5642=m
-CONFIG_SOC_CAMERA_OV772X=m
-CONFIG_SOC_CAMERA_OV9640=m
-CONFIG_SOC_CAMERA_OV9740=m
-CONFIG_SOC_CAMERA_RJ54N1=m
-CONFIG_SOC_CAMERA_TW9910=m
-
-#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=m
@@ -5547,6 +5691,7 @@ CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y
@@ -5560,6 +5705,10 @@ CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
CONFIG_DRM_I2C_NXP_TDA9950=m
+
+#
+# ARM devices
+#
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_USERPTR is not set
CONFIG_DRM_AMDGPU=m
@@ -5577,9 +5726,10 @@ CONFIG_DRM_AMD_ACP=y
# Display Engine Configuration
#
CONFIG_DRM_AMD_DC=y
-# CONFIG_DRM_AMD_DC_FBC is not set
CONFIG_DRM_AMD_DC_DCN1_0=y
+CONFIG_DRM_AMD_DC_DCN1_01=y
# CONFIG_DEBUG_KERNEL_DC is not set
+CONFIG_HSA_AMD=y
#
# AMD Library routines
@@ -5588,6 +5738,7 @@ CONFIG_CHASH=m
# CONFIG_CHASH_STATS is not set
# CONFIG_CHASH_SELFTEST is not set
CONFIG_DRM_NOUVEAU=m
+CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_NOUVEAU_DEBUG_MMU is not set
@@ -5600,6 +5751,7 @@ CONFIG_DRM_I915_USERPTR=y
CONFIG_DRM_I915_GVT=y
CONFIG_DRM_I915_GVT_KVMGT=m
CONFIG_DRM_VGEM=m
+# CONFIG_DRM_VKMS is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
@@ -5625,11 +5777,14 @@ CONFIG_DRM_PANEL_BRIDGE=y
# Display Interface Bridges
#
CONFIG_DRM_ANALOGIX_ANX78XX=m
-CONFIG_HSA_AMD=m
+CONFIG_DRM_ETNAVIV=m
+CONFIG_DRM_ETNAVIV_THERMAL=y
CONFIG_DRM_HISI_HIBMC=m
CONFIG_DRM_TINYDRM=m
CONFIG_TINYDRM_MIPI_DBI=m
+CONFIG_TINYDRM_HX8357D=m
CONFIG_TINYDRM_ILI9225=m
+CONFIG_TINYDRM_ILI9341=m
CONFIG_TINYDRM_MI0283QT=m
CONFIG_TINYDRM_REPAPER=m
CONFIG_TINYDRM_ST7586=m
@@ -5641,10 +5796,10 @@ CONFIG_DRM_LIB_RANDOM=y
#
# Frame buffer Devices
#
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
@@ -5658,7 +5813,7 @@ CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_BACKLIGHT=m
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
@@ -5707,7 +5862,6 @@ CONFIG_FB_EFI=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_HYPERV is not set
CONFIG_FB_SIMPLE=y
# CONFIG_FB_SM712 is not set
@@ -5721,8 +5875,6 @@ CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
-CONFIG_LCD_S6E63M0=m
-CONFIG_LCD_LD9040=m
CONFIG_LCD_AMS369FG06=m
CONFIG_LCD_LMS501KF03=m
CONFIG_LCD_HX8357=m
@@ -5763,6 +5915,7 @@ CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
@@ -5923,6 +6076,7 @@ CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
+CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_EXT_CORE=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
@@ -5964,6 +6118,7 @@ CONFIG_SND_SOC_ACPI=m
CONFIG_SND_SOC_AMD_ACP=m
CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=m
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m
+CONFIG_SND_SOC_AMD_ACP3x=m
CONFIG_SND_ATMEL_SOC=m
CONFIG_SND_DESIGNWARE_I2S=m
CONFIG_SND_DESIGNWARE_PCM=y
@@ -5980,6 +6135,7 @@ CONFIG_SND_SOC_FSL_SAI=m
CONFIG_SND_SOC_FSL_SSI=m
CONFIG_SND_SOC_FSL_SPDIF=m
CONFIG_SND_SOC_FSL_ESAI=m
+CONFIG_SND_SOC_FSL_MICFIL=m
CONFIG_SND_SOC_IMX_AUDMUX=m
CONFIG_SND_I2S_HI6210_I2S=m
CONFIG_SND_SOC_IMG=y
@@ -6000,8 +6156,17 @@ CONFIG_SND_SOC_INTEL_HASWELL=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m
-CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=m
CONFIG_SND_SOC_INTEL_SKYLAKE=m
+CONFIG_SND_SOC_INTEL_SKL=m
+CONFIG_SND_SOC_INTEL_APL=m
+CONFIG_SND_SOC_INTEL_KBL=m
+CONFIG_SND_SOC_INTEL_GLK=m
+CONFIG_SND_SOC_INTEL_CNL=m
+CONFIG_SND_SOC_INTEL_CFL=m
+CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=m
+CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=m
+# CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC is not set
+CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=m
CONFIG_SND_SOC_ACPI_INTEL_MATCH=m
CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_INTEL_HASWELL_MACH=m
@@ -6024,10 +6189,17 @@ CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m
CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m
CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=m
CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH=m
+CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH=m
+CONFIG_SND_SOC_INTEL_KBL_RT5660_MACH=m
+# CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH is not set
+CONFIG_SND_SOC_MTK_BTCVSD=m
#
# STMicroelectronics STM32 SOC audio support
#
+CONFIG_SND_SOC_XILINX_I2S=m
+CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=m
+CONFIG_SND_SOC_XILINX_SPDIF=m
CONFIG_SND_SOC_XTFPGA_I2S=m
CONFIG_ZX_TDM=m
CONFIG_SND_SOC_I2C_AND_SPI=m
@@ -6044,6 +6216,7 @@ CONFIG_SND_SOC_ADAU1761_I2C=m
CONFIG_SND_SOC_ADAU1761_SPI=m
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_AK4104=m
+CONFIG_SND_SOC_AK4118=m
CONFIG_SND_SOC_AK4458=m
CONFIG_SND_SOC_AK4554=m
CONFIG_SND_SOC_AK4613=m
@@ -6053,10 +6226,12 @@ CONFIG_SND_SOC_AK5558=m
CONFIG_SND_SOC_ALC5623=m
CONFIG_SND_SOC_BD28623=m
# CONFIG_SND_SOC_BT_SCO is not set
+CONFIG_SND_SOC_CROS_EC_CODEC=m
CONFIG_SND_SOC_CS35L32=m
CONFIG_SND_SOC_CS35L33=m
CONFIG_SND_SOC_CS35L34=m
CONFIG_SND_SOC_CS35L35=m
+CONFIG_SND_SOC_CS35L36=m
CONFIG_SND_SOC_CS42L42=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SOC_CS42L51_I2C=m
@@ -6071,14 +6246,15 @@ CONFIG_SND_SOC_CS4271_SPI=m
CONFIG_SND_SOC_CS42XX8=m
CONFIG_SND_SOC_CS42XX8_I2C=m
CONFIG_SND_SOC_CS43130=m
+CONFIG_SND_SOC_CS4341=m
CONFIG_SND_SOC_CS4349=m
CONFIG_SND_SOC_CS53L30=m
CONFIG_SND_SOC_DA7213=m
CONFIG_SND_SOC_DA7219=m
-CONFIG_SND_SOC_DIO2125=m
CONFIG_SND_SOC_DMIC=m
CONFIG_SND_SOC_HDMI_CODEC=m
CONFIG_SND_SOC_ES7134=m
+# CONFIG_SND_SOC_ES7241 is not set
CONFIG_SND_SOC_ES8316=m
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_I2C=m
@@ -6086,6 +6262,7 @@ CONFIG_SND_SOC_ES8328_SPI=m
CONFIG_SND_SOC_GTM601=m
CONFIG_SND_SOC_HDAC_HDMI=m
CONFIG_SND_SOC_INNO_RK3036=m
+CONFIG_SND_SOC_MAX98088=m
CONFIG_SND_SOC_MAX98090=m
CONFIG_SND_SOC_MAX98357A=m
CONFIG_SND_SOC_MAX98504=m
@@ -6104,12 +6281,16 @@ CONFIG_SND_SOC_PCM179X_SPI=m
CONFIG_SND_SOC_PCM186X=m
CONFIG_SND_SOC_PCM186X_I2C=m
CONFIG_SND_SOC_PCM186X_SPI=m
+CONFIG_SND_SOC_PCM3060=m
+CONFIG_SND_SOC_PCM3060_I2C=m
+CONFIG_SND_SOC_PCM3060_SPI=m
CONFIG_SND_SOC_PCM3168A=m
CONFIG_SND_SOC_PCM3168A_I2C=m
CONFIG_SND_SOC_PCM3168A_SPI=m
CONFIG_SND_SOC_PCM512x=m
CONFIG_SND_SOC_PCM512x_I2C=m
CONFIG_SND_SOC_PCM512x_SPI=m
+CONFIG_SND_SOC_RK3328=m
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RL6347A=m
CONFIG_SND_SOC_RT286=m
@@ -6121,6 +6302,7 @@ CONFIG_SND_SOC_RT5631=m
CONFIG_SND_SOC_RT5640=m
CONFIG_SND_SOC_RT5645=m
CONFIG_SND_SOC_RT5651=m
+CONFIG_SND_SOC_RT5660=m
CONFIG_SND_SOC_RT5663=m
CONFIG_SND_SOC_RT5670=m
CONFIG_SND_SOC_RT5677=m
@@ -6130,6 +6312,7 @@ CONFIG_SND_SOC_SI476X=m
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_I2C=m
CONFIG_SND_SOC_SIGMADSP_REGMAP=m
+# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
CONFIG_SND_SOC_SIRF_AUDIO_CODEC=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SSM2305=m
@@ -6158,6 +6341,7 @@ CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TS3A227E=m
CONFIG_SND_SOC_TSCS42XX=m
CONFIG_SND_SOC_TSCS454=m
+CONFIG_SND_SOC_WCD9335=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8524=m
@@ -6176,6 +6360,7 @@ CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8804_I2C=m
CONFIG_SND_SOC_WM8804_SPI=m
CONFIG_SND_SOC_WM8903=m
+CONFIG_SND_SOC_WM8904=m
CONFIG_SND_SOC_WM8960=m
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8974=m
@@ -6184,8 +6369,10 @@ CONFIG_SND_SOC_WM8985=m
CONFIG_SND_SOC_ZX_AUD96P22=m
CONFIG_SND_SOC_MAX9759=m
CONFIG_SND_SOC_MT6351=m
+CONFIG_SND_SOC_MT6358=m
CONFIG_SND_SOC_NAU8540=m
CONFIG_SND_SOC_NAU8810=m
+CONFIG_SND_SOC_NAU8822=m
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_NAU8825=m
CONFIG_SND_SOC_TPA6130A2=m
@@ -6218,9 +6405,11 @@ CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BETOP_FF=m
+CONFIG_HID_BIGBEN_FF=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CORSAIR=m
+# CONFIG_HID_COUGAR is not set
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CMEDIA=m
CONFIG_HID_CP2112=m
@@ -6242,6 +6431,7 @@ CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
+CONFIG_HID_VIEWSONIC=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
@@ -6259,6 +6449,7 @@ CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MALTRON=m
CONFIG_HID_MAYFLASH=m
CONFIG_HID_REDRAGON=m
CONFIG_HID_MICROSOFT=m
@@ -6345,6 +6536,7 @@ CONFIG_USB_OTG=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_OTG_FSM=m
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
+CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
@@ -6362,6 +6554,7 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
+CONFIG_USB_EHCI_FSL=m
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
@@ -6451,6 +6644,7 @@ CONFIG_USB_DWC3_DUAL_ROLE=y
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=m
+CONFIG_USB_DWC3_HAPS=m
CONFIG_USB_DWC2=m
# CONFIG_USB_DWC2_HOST is not set
@@ -6685,8 +6879,11 @@ CONFIG_USB_G_HID=m
CONFIG_USB_G_WEBCAM=m
CONFIG_TYPEC=m
CONFIG_TYPEC_TCPM=m
+CONFIG_TYPEC_TCPCI=m
+CONFIG_TYPEC_RT1711H=m
CONFIG_TYPEC_FUSB302=m
CONFIG_TYPEC_UCSI=m
+CONFIG_UCSI_CCG=m
CONFIG_UCSI_ACPI=m
CONFIG_TYPEC_TPS6598X=m
@@ -6694,10 +6891,15 @@ CONFIG_TYPEC_TPS6598X=m
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
CONFIG_TYPEC_MUX_PI3USB30532=m
+
+#
+# USB Type-C Alternate Mode drivers
+#
+# CONFIG_TYPEC_DP_ALTMODE is not set
+CONFIG_USB_ROLE_SWITCH=m
CONFIG_USB_ROLES_INTEL_XHCI=m
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=m
-CONFIG_USB_ROLE_SWITCH=m
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
@@ -6719,6 +6921,7 @@ CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_SDHCI_F_SDH30=m
CONFIG_MMC_WBSD=m
+CONFIG_MMC_ALCOR=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
CONFIG_MMC_SDRICOH_CS=m
@@ -6825,6 +7028,8 @@ CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=m
+CONFIG_LEDS_TRIGGER_PATTERN=m
+CONFIG_LEDS_TRIGGER_AUDIO=m
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=m
@@ -6849,6 +7054,13 @@ CONFIG_INFINIBAND_NES=m
CONFIG_INFINIBAND_OCRDMA=m
CONFIG_INFINIBAND_VMWARE_PVRDMA=m
CONFIG_INFINIBAND_USNIC=m
+CONFIG_INFINIBAND_BNXT_RE=m
+CONFIG_INFINIBAND_HFI1=m
+# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set
+# CONFIG_SDMA_VERBOSITY is not set
+CONFIG_INFINIBAND_QEDR=m
+CONFIG_INFINIBAND_RDMAVT=m
+CONFIG_RDMA_RXE=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
@@ -6858,13 +7070,6 @@ CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
CONFIG_INFINIBAND_OPA_VNIC=m
-CONFIG_INFINIBAND_RDMAVT=m
-CONFIG_RDMA_RXE=m
-CONFIG_INFINIBAND_HFI1=m
-# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set
-# CONFIG_SDMA_VERBOSITY is not set
-CONFIG_INFINIBAND_QEDR=m
-CONFIG_INFINIBAND_BNXT_RE=m
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
@@ -6887,6 +7092,7 @@ CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_EDAC_SKX=m
+CONFIG_EDAC_I10NM=m
CONFIG_EDAC_PND2=m
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
@@ -6912,9 +7118,9 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y
#
CONFIG_RTC_DRV_88PM80X=m
CONFIG_RTC_DRV_ABB5ZES3=m
+CONFIG_RTC_DRV_ABEOZ9=m
CONFIG_RTC_DRV_ABX80X=m
CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_DS1307_HWMON=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1374_WDT=y
@@ -6939,7 +7145,9 @@ CONFIG_RTC_DRV_RX8010=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3028=m
CONFIG_RTC_DRV_RV8803=m
+CONFIG_RTC_DRV_SD3078=m
#
# SPI RTC drivers
@@ -6983,8 +7191,6 @@ CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
-CONFIG_RTC_DS1685_PROC_REGS=y
-CONFIG_RTC_DS1685_SYSFS_REGS=y
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_DA9052=m
@@ -7013,6 +7219,7 @@ CONFIG_RTC_DRV_MT6397=m
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=m
+CONFIG_RTC_DRV_WILCO_EC=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
@@ -7045,6 +7252,7 @@ CONFIG_DMA_ENGINE_RAID=y
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
+# CONFIG_UDMABUF is not set
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_HD44780=m
@@ -7054,10 +7262,14 @@ CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_IMG_ASCII_LCD=m
-CONFIG_PANEL=m
+CONFIG_PARPORT_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
+# CONFIG_CHARLCD_BL_OFF is not set
+CONFIG_CHARLCD_BL_ON=y
+# CONFIG_CHARLCD_BL_FLASH is not set
+CONFIG_PANEL=m
CONFIG_CHARLCD=m
CONFIG_UIO=m
CONFIG_UIO_CIF=m
@@ -7110,7 +7322,6 @@ CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=m
CONFIG_COMEDI_TEST=m
CONFIG_COMEDI_PARPORT=m
-CONFIG_COMEDI_SERIAL2002=m
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=m
CONFIG_COMEDI_PCL724=m
@@ -7240,6 +7451,7 @@ CONFIG_COMEDI_ISADMA=m
CONFIG_COMEDI_NI_LABPC=m
CONFIG_COMEDI_NI_LABPC_ISADMA=m
CONFIG_COMEDI_NI_TIO=m
+CONFIG_COMEDI_NI_ROUTING=m
CONFIG_RTL8192U=m
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
@@ -7269,9 +7481,6 @@ CONFIG_ADIS16240=m
#
# Analog to digital converters
#
-CONFIG_AD7606=m
-CONFIG_AD7606_IFACE_PARALLEL=m
-CONFIG_AD7606_IFACE_SPI=m
CONFIG_AD7780=m
CONFIG_AD7816=m
CONFIG_AD7192=m
@@ -7288,7 +7497,6 @@ CONFIG_ADT7316_I2C=m
# Capacitance to digital converters
#
CONFIG_AD7150=m
-CONFIG_AD7152=m
CONFIG_AD7746=m
#
@@ -7298,11 +7506,6 @@ CONFIG_AD9832=m
CONFIG_AD9834=m
#
-# Digital gyroscope sensors
-#
-CONFIG_ADIS16060=m
-
-#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m
@@ -7317,10 +7520,8 @@ CONFIG_ADE7854_SPI=m
#
# Resolver to digital converters
#
-CONFIG_AD2S90=m
CONFIG_AD2S1210=m
CONFIG_FB_SM750=m
-CONFIG_FB_XGI=m
#
# Speakup console speech
@@ -7339,8 +7540,6 @@ CONFIG_SPEAKUP_SYNTH_TXPRT=m
# CONFIG_SPEAKUP_SYNTH_DUMMY is not set
CONFIG_STAGING_MEDIA=y
CONFIG_I2C_BCM2048=m
-CONFIG_SOC_CAMERA_IMX074=m
-CONFIG_SOC_CAMERA_MT9T031=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_ZR36060=m
@@ -7349,6 +7548,11 @@ CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_VIDEO_IPU3_IMGU=m
+
+#
+# soc_camera sensor drivers
+#
#
# Android
@@ -7357,11 +7561,7 @@ CONFIG_LTE_GDM724X=m
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
-CONFIG_MTD_SPINAND_MT29F=m
-CONFIG_MTD_SPINAND_ONDIEECC=y
-CONFIG_DGNC=m
CONFIG_GS_FPGABOOT=m
-CONFIG_CRYPTO_SKEIN=m
CONFIG_UNISYSSPAR=y
CONFIG_FB_TFT=m
CONFIG_FB_TFT_AGM1264K_FL=m
@@ -7429,23 +7629,21 @@ CONFIG_GREYBUS_SDIO=m
CONFIG_GREYBUS_SPI=m
CONFIG_GREYBUS_UART=m
CONFIG_GREYBUS_USB=m
+CONFIG_DRM_VBOXVIDEO=m
+CONFIG_PI433=m
#
-# USB Power Delivery and Type-C drivers
+# Gasket devices
#
-CONFIG_TYPEC_TCPCI=m
-CONFIG_TYPEC_RT1711H=m
-# CONFIG_DRM_VBOXVIDEO is not set
-CONFIG_PI433=m
-CONFIG_MTK_MMC=m
-# CONFIG_MTK_AEE_KDUMP is not set
-# CONFIG_MTK_MMC_CD_POLL is not set
+# CONFIG_STAGING_GASKET_FRAMEWORK is not set
+# CONFIG_EROFS_FS is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACER_WIRELESS=m
CONFIG_ACERHDF=m
CONFIG_ALIENWARE_WMI=m
CONFIG_ASUS_LAPTOP=m
+CONFIG_DCDBAS=m
CONFIG_DELL_SMBIOS=m
CONFIG_DELL_SMBIOS_WMI=y
CONFIG_DELL_SMBIOS_SMM=y
@@ -7456,6 +7654,7 @@ CONFIG_DELL_WMI_AIO=m
CONFIG_DELL_WMI_LED=m
CONFIG_DELL_SMO8800=m
CONFIG_DELL_RBTN=m
+CONFIG_DELL_RBU=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
@@ -7463,6 +7662,7 @@ CONFIG_GPD_POCKET_FAN=m
CONFIG_HP_ACCEL=m
CONFIG_HP_WIRELESS=m
CONFIG_HP_WMI=m
+CONFIG_LG_LAPTOP=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
@@ -7509,7 +7709,6 @@ CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
CONFIG_INTEL_RST=m
CONFIG_INTEL_SMARTCONNECT=m
-CONFIG_PVPANIC=m
CONFIG_INTEL_PMC_IPC=m
CONFIG_INTEL_BXTWC_PMIC_TMU=m
CONFIG_SURFACE_PRO3_BUTTON=m
@@ -7519,17 +7718,26 @@ CONFIG_INTEL_TELEMETRY=m
CONFIG_MLX_PLATFORM=m
# CONFIG_INTEL_TURBO_MAX_3 is not set
CONFIG_INTEL_CHTDC_TI_PWRBTN=m
+# CONFIG_I2C_MULTI_INSTANTIATE is not set
+CONFIG_INTEL_ATOMISP2_PM=m
+CONFIG_HUAWEI_WMI=m
+CONFIG_PCENGINES_APU2=m
CONFIG_PMC_ATOM=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_LAPTOP=m
CONFIG_CHROMEOS_PSTORE=m
CONFIG_CHROMEOS_TBMC=m
+# CONFIG_CROS_EC_I2C is not set
+# CONFIG_CROS_EC_SPI is not set
CONFIG_CROS_EC_LPC=m
CONFIG_CROS_EC_LPC_MEC=y
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_KBD_LED_BACKLIGHT=m
+CONFIG_WILCO_EC=m
+# CONFIG_WILCO_EC_DEBUGFS is not set
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=m
+# CONFIG_MLXREG_IO is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
@@ -7538,6 +7746,7 @@ CONFIG_COMMON_CLK=y
# Common Clock Framework
#
CONFIG_COMMON_CLK_WM831X=m
+# CONFIG_COMMON_CLK_MAX9485 is not set
CONFIG_COMMON_CLK_SI5351=m
CONFIG_COMMON_CLK_SI544=m
CONFIG_COMMON_CLK_CDCE706=m
@@ -7554,13 +7763,15 @@ CONFIG_CLKBLD_I8253=y
CONFIG_MAILBOX=y
CONFIG_PCC=y
CONFIG_ALTERA_MBOX=m
+CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
-CONFIG_IOMMU_IOVA=y
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
@@ -7569,6 +7780,7 @@ CONFIG_INTEL_IOMMU_SVM=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y
+CONFIG_HYPERV_IOMMU=y
#
# Remoteproc drivers
@@ -7605,6 +7817,10 @@ CONFIG_SOUNDWIRE_INTEL=m
#
#
+# NXP/Freescale QorIQ SoC drivers
+#
+
+#
# i.MX SoC drivers
#
@@ -7645,6 +7861,7 @@ CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX3355=m
CONFIG_EXTCON_MAX77693=m
+CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=m
# CONFIG_EXTCON_USB_GPIO is not set
@@ -7668,6 +7885,9 @@ CONFIG_IIO_TRIGGERED_EVENT=m
#
CONFIG_ADIS16201=m
CONFIG_ADIS16209=m
+CONFIG_ADXL372=m
+CONFIG_ADXL372_SPI=m
+CONFIG_ADXL372_I2C=m
CONFIG_BMA180=m
CONFIG_BMA220=m
CONFIG_BMC150_ACCEL=m
@@ -7705,15 +7925,21 @@ CONFIG_STK8BA50=m
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=m
+CONFIG_AD7124=m
CONFIG_AD7266=m
CONFIG_AD7291=m
CONFIG_AD7298=m
CONFIG_AD7476=m
+CONFIG_AD7606=m
+CONFIG_AD7606_IFACE_PARALLEL=m
+CONFIG_AD7606_IFACE_SPI=m
CONFIG_AD7766=m
+CONFIG_AD7768_1=m
CONFIG_AD7791=m
CONFIG_AD7793=m
CONFIG_AD7887=m
CONFIG_AD7923=m
+CONFIG_AD7949=m
CONFIG_AD799X=m
CONFIG_AXP20X_ADC=m
CONFIG_AXP288_ADC=m
@@ -7733,11 +7959,13 @@ CONFIG_MAX1363=m
CONFIG_MAX9611=m
CONFIG_MCP320X=m
CONFIG_MCP3422=m
+CONFIG_MCP3911=m
CONFIG_MEN_Z188_ADC=m
CONFIG_NAU7802=m
CONFIG_QCOM_VADC_COMMON=m
CONFIG_QCOM_SPMI_IADC=m
CONFIG_QCOM_SPMI_VADC=m
+CONFIG_QCOM_SPMI_ADC5=m
CONFIG_TI_ADC081C=m
CONFIG_TI_ADC0832=m
CONFIG_TI_ADC084S021=m
@@ -7764,8 +7992,12 @@ CONFIG_AD8366=m
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=m
+# CONFIG_BME680 is not set
CONFIG_CCS811=m
CONFIG_IAQCORE=m
+CONFIG_PMS7003=m
+CONFIG_SENSIRION_SGP30=m
+CONFIG_SPS30=m
CONFIG_VZ89X=m
CONFIG_IIO_CROS_EC_SENSORS_CORE=m
CONFIG_IIO_CROS_EC_SENSORS=m
@@ -7804,11 +8036,13 @@ CONFIG_AD5592R=m
CONFIG_AD5593R=m
CONFIG_AD5504=m
CONFIG_AD5624R_SPI=m
+CONFIG_LTC1660=m
CONFIG_LTC2632=m
CONFIG_AD5686=m
CONFIG_AD5686_SPI=m
CONFIG_AD5696_I2C=m
CONFIG_AD5755=m
+# CONFIG_AD5758 is not set
CONFIG_AD5761=m
CONFIG_AD5764=m
CONFIG_AD5791=m
@@ -7821,6 +8055,8 @@ CONFIG_MCP4725=m
CONFIG_MCP4922=m
CONFIG_TI_DAC082S085=m
CONFIG_TI_DAC5571=m
+CONFIG_TI_DAC7311=m
+CONFIG_TI_DAC7612=m
#
# IIO dummy driver
@@ -7931,8 +8167,10 @@ CONFIG_SENSORS_LM3533=m
CONFIG_LTR501=m
CONFIG_LV0104CS=m
CONFIG_MAX44000=m
+CONFIG_MAX44009=m
CONFIG_OPT3001=m
CONFIG_PA12203001=m
+# CONFIG_SI1133 is not set
CONFIG_SI1145=m
CONFIG_STK3310=m
CONFIG_ST_UVIS25=m
@@ -7946,6 +8184,7 @@ CONFIG_TSL2772=m
CONFIG_TSL4531=m
CONFIG_US5182D=m
CONFIG_VCNL4000=m
+CONFIG_VCNL4035=m
CONFIG_VEML6070=m
CONFIG_VL6180=m
CONFIG_ZOPT2201=m
@@ -7967,6 +8206,9 @@ CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
CONFIG_SENSORS_HMC5843_SPI=m
+CONFIG_SENSORS_RM3100=m
+CONFIG_SENSORS_RM3100_I2C=m
+CONFIG_SENSORS_RM3100_SPI=m
#
# Multiplexers
@@ -7996,6 +8238,7 @@ CONFIG_MAX5487=m
CONFIG_MCP4018=m
CONFIG_MCP4131=m
CONFIG_MCP4531=m
+CONFIG_MCP41010=m
CONFIG_TPL0102=m
#
@@ -8038,15 +8281,18 @@ CONFIG_AS3935=m
#
# Proximity and distance sensors
#
+# CONFIG_ISL29501 is not set
CONFIG_LIDAR_LITE_V2=m
CONFIG_RFD77402=m
CONFIG_SRF04=m
CONFIG_SX9500=m
CONFIG_SRF08=m
+CONFIG_VL53L0X_I2C=m
#
# Resolver to digital converters
#
+CONFIG_AD2S90=m
CONFIG_AD2S1200=m
#
@@ -8125,6 +8371,7 @@ CONFIG_PHY_SAMSUNG_USB2=m
CONFIG_PHY_TUSB1210=m
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=m
+# CONFIG_IDLE_INJECT is not set
CONFIG_MCB=m
CONFIG_MCB_PCI=m
CONFIG_MCB_LPC=m
@@ -8146,9 +8393,11 @@ CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
+CONFIG_NVDIMM_KEYS=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
+CONFIG_DEV_DAX_KMEM=m
CONFIG_NVMEM=y
CONFIG_RAVE_SP_EEPROM=m
@@ -8156,6 +8405,8 @@ CONFIG_RAVE_SP_EEPROM=m
# HW tracing support
#
CONFIG_STM=m
+CONFIG_STM_PROTO_BASIC=m
+CONFIG_STM_PROTO_SYS_T=m
# CONFIG_STM_DUMMY is not set
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
@@ -8175,67 +8426,23 @@ CONFIG_FPGA_MGR_ALTERA_CVP=m
CONFIG_FPGA_MGR_XILINX_SPI=m
CONFIG_FPGA_MGR_MACHXO2_SPI=m
CONFIG_FPGA_BRIDGE=m
+CONFIG_ALTERA_FREEZE_BRIDGE=m
CONFIG_XILINX_PR_DECOUPLER=m
CONFIG_FPGA_REGION=m
+# CONFIG_FPGA_DFL is not set
CONFIG_PM_OPP=y
# CONFIG_UNISYS_VISORBUS is not set
CONFIG_SIOX=m
CONFIG_SIOX_BUS_GPIO=m
CONFIG_SLIMBUS=m
CONFIG_SLIM_QCOM_CTRL=m
-
-#
-# Firmware Drivers
-#
-CONFIG_EDD=m
-# CONFIG_EDD_OFF is not set
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_DELL_RBU=m
-CONFIG_DCDBAS=m
-CONFIG_DMIID=y
-CONFIG_DMI_SYSFS=m
-CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=m
-CONFIG_FW_CFG_SYSFS=m
-# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
-CONFIG_GOOGLE_FIRMWARE=y
-CONFIG_GOOGLE_SMI=m
-CONFIG_GOOGLE_COREBOOT_TABLE=m
-CONFIG_GOOGLE_COREBOOT_TABLE_ACPI=m
-CONFIG_GOOGLE_MEMCONSOLE=m
-CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY=m
-CONFIG_GOOGLE_FRAMEBUFFER_COREBOOT=m
-CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=m
-CONFIG_GOOGLE_VPD=m
-
-#
-# EFI (Extensible Firmware Interface) Support
-#
-CONFIG_EFI_VARS=m
-CONFIG_EFI_ESRT=y
-CONFIG_EFI_VARS_PSTORE=m
-CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
-CONFIG_EFI_RUNTIME_MAP=y
-# CONFIG_EFI_FAKE_MEMMAP is not set
-CONFIG_EFI_RUNTIME_WRAPPERS=y
-CONFIG_EFI_BOOTLOADER_CONTROL=m
-CONFIG_EFI_CAPSULE_LOADER=m
-CONFIG_EFI_TEST=m
-CONFIG_APPLE_PROPERTIES=y
-CONFIG_RESET_ATTACK_MITIGATION=y
-CONFIG_UEFI_CPER=y
-CONFIG_UEFI_CPER_X86=y
-CONFIG_EFI_DEV_PATH_PARSER=y
-
-#
-# Tegra firmware driver
-#
+CONFIG_INTERCONNECT=m
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
@@ -8247,8 +8454,6 @@ CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
-CONFIG_EXT4_ENCRYPTION=y
-CONFIG_EXT4_FS_ENCRYPTION=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
@@ -8294,7 +8499,6 @@ CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
CONFIG_F2FS_CHECK_FS=y
-CONFIG_F2FS_FS_ENCRYPTION=y
# CONFIG_F2FS_IO_TRACE is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_FS_DAX=y
@@ -8303,7 +8507,7 @@ CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
-CONFIG_FS_ENCRYPTION=m
+CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -8328,6 +8532,7 @@ CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_NFS_EXPORT=y
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
+# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
@@ -8390,7 +8595,6 @@ CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
-CONFIG_HFSPLUS_FS_POSIX_ACL=y
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
@@ -8417,8 +8621,9 @@ CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_ATIME_SUPPORT=y
-CONFIG_UBIFS_FS_ENCRYPTION=y
+CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_SECURITY=y
+# CONFIG_UBIFS_FS_AUTHENTICATION is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_CRAMFS_MTD=y
@@ -8453,15 +8658,18 @@ CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
CONFIG_PSTORE_LZO_COMPRESS=y
-# CONFIG_PSTORE_LZ4_COMPRESS is not set
-CONFIG_PSTORE_LZ4HC_COMPRESS=m
+CONFIG_PSTORE_LZ4_COMPRESS=y
+CONFIG_PSTORE_LZ4HC_COMPRESS=y
CONFIG_PSTORE_842_COMPRESS=y
+CONFIG_PSTORE_ZSTD_COMPRESS=y
CONFIG_PSTORE_COMPRESS=y
-CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
+# CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZO_COMPRESS_DEFAULT is not set
+CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_842_COMPRESS_DEFAULT is not set
-CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
+# CONFIG_PSTORE_ZSTD_COMPRESS_DEFAULT is not set
+CONFIG_PSTORE_COMPRESS_DEFAULT="lz4"
# CONFIG_PSTORE_CONSOLE is not set
CONFIG_PSTORE_PMSG=y
# CONFIG_PSTORE_FTRACE is not set
@@ -8470,9 +8678,6 @@ CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-CONFIG_EXOFS_FS=m
-# CONFIG_EXOFS_DEBUG is not set
-CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
@@ -8512,14 +8717,15 @@ CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
# CONFIG_SUNRPC_DEBUG is not set
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_CEPH_FS=m
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
@@ -8527,13 +8733,13 @@ CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
# CONFIG_CIFS_DEBUG is not set
CONFIG_CIFS_DFS_UPCALL=y
-CONFIG_CIFS_SMB311=y
# CONFIG_CIFS_SMB_DIRECT is not set
CONFIG_CIFS_FSCACHE=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
+# CONFIG_AFS_DEBUG_CURSOR is not set
CONFIG_9P_FS=m
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
@@ -8593,254 +8799,6 @@ CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-
-#
-# printk and dmesg options
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_CONSOLE_LOGLEVEL_DEFAULT=1
-CONFIG_MESSAGE_LOGLEVEL_DEFAULT=1
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-
-#
-# Compile-time checks and compiler options
-#
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=0
-CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_READABLE_ASM is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_PAGE_OWNER is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
-CONFIG_SECTION_MISMATCH_WARN_ONLY=y
-CONFIG_STACK_VALIDATION=y
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
-CONFIG_MAGIC_SYSRQ_SERIAL=y
-CONFIG_DEBUG_KERNEL=y
-
-#
-# Memory Debugging
-#
-# CONFIG_PAGE_EXTENSION is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_PAGE_POISONING is not set
-# CONFIG_DEBUG_PAGE_REF is not set
-# CONFIG_DEBUG_RODATA_TEST is not set
-# CONFIG_DEBUG_OBJECTS is not set
-CONFIG_SLUB_DEBUG_ON=y
-# CONFIG_SLUB_STATS is not set
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-# CONFIG_DEBUG_VIRTUAL is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-CONFIG_HAVE_ARCH_KASAN=y
-# CONFIG_KASAN is not set
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_CC_HAS_SANCOV_TRACE_PC=y
-# CONFIG_KCOV is not set
-# CONFIG_DEBUG_SHIRQ is not set
-
-#
-# Debug Lockups and Hangs
-#
-# CONFIG_SOFTLOCKUP_DETECTOR is not set
-CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_WQ_WATCHDOG is not set
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHED_INFO=y
-CONFIG_SCHEDSTATS=y
-CONFIG_SCHED_STACK_END_CHECK=y
-# CONFIG_DEBUG_TIMEKEEPING is not set
-# CONFIG_DEBUG_PREEMPT is not set
-
-#
-# Lock Debugging (spinlocks, mutexes, etc...)
-#
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_LOCK_TORTURE_TEST is not set
-# CONFIG_WW_MUTEX_SELFTEST is not set
-CONFIG_STACKTRACE=y
-# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_PI_LIST=y
-CONFIG_DEBUG_SG=y
-CONFIG_DEBUG_NOTIFIERS=y
-CONFIG_DEBUG_CREDENTIALS=y
-
-#
-# RCU Debugging
-#
-CONFIG_TORTURE_TEST=m
-CONFIG_RCU_PERF_TEST=m
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_TIMEOUT=60
-# CONFIG_RCU_TRACE is not set
-# CONFIG_RCU_EQS_DEBUG is not set
-# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-# CONFIG_NOTIFIER_ERROR_INJECTION is not set
-CONFIG_FUNCTION_ERROR_INJECTION=y
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_LATENCYTOP=y
-CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_FENTRY=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_TRACE_CLOCK=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_TRACING=y
-CONFIG_GENERIC_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-CONFIG_FUNCTION_TRACER=y
-# CONFIG_FUNCTION_GRAPH_TRACER is not set
-# CONFIG_PREEMPTIRQ_EVENTS is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_HWLAT_TRACER is not set
-CONFIG_FTRACE_SYSCALLS=y
-# CONFIG_TRACER_SNAPSHOT is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-CONFIG_STACK_TRACER=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_KPROBE_EVENTS=y
-# CONFIG_UPROBE_EVENTS is not set
-CONFIG_BPF_EVENTS=y
-CONFIG_PROBE_EVENTS=y
-CONFIG_DYNAMIC_FTRACE=y
-CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_FUNCTION_PROFILER=y
-# CONFIG_BPF_KPROBE_OVERRIDE is not set
-CONFIG_FTRACE_MCOUNT_RECORD=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_MMIOTRACE is not set
-# CONFIG_HIST_TRIGGERS is not set
-# CONFIG_TRACEPOINT_BENCHMARK is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_RING_BUFFER_STARTUP_TEST is not set
-# CONFIG_TRACE_EVAL_MAP_FILE is not set
-CONFIG_TRACING_EVENTS_GPIO=y
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-# CONFIG_DMA_API_DEBUG is not set
-CONFIG_RUNTIME_TESTING_MENU=y
-CONFIG_LKDTM=m
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_TEST_SORT is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_RBTREE_TEST is not set
-# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_PERCPU_TEST is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_ASYNC_RAID6_TEST is not set
-# CONFIG_TEST_HEXDUMP is not set
-# CONFIG_TEST_STRING_HELPERS is not set
-# CONFIG_TEST_KSTRTOX is not set
-# CONFIG_TEST_PRINTF is not set
-# CONFIG_TEST_BITMAP is not set
-# CONFIG_TEST_UUID is not set
-# CONFIG_TEST_OVERFLOW is not set
-# CONFIG_TEST_RHASHTABLE is not set
-# CONFIG_TEST_HASH is not set
-# CONFIG_TEST_PARMAN is not set
-# CONFIG_TEST_LKM is not set
-# CONFIG_TEST_USER_COPY is not set
-# CONFIG_TEST_BPF is not set
-# CONFIG_FIND_BIT_BENCHMARK is not set
-# CONFIG_TEST_FIRMWARE is not set
-# CONFIG_TEST_SYSCTL is not set
-# CONFIG_TEST_UDELAY is not set
-# CONFIG_TEST_STATIC_KEYS is not set
-# CONFIG_TEST_KMOD is not set
-CONFIG_MEMTEST=y
-# CONFIG_BUG_ON_DATA_CORRUPTION is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
-# CONFIG_UBSAN is not set
-CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
-CONFIG_STRICT_DEVMEM=y
-CONFIG_IO_STRICT_DEVMEM=y
-CONFIG_EARLY_PRINTK_USB=y
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EARLY_PRINTK_DBGP=y
-CONFIG_EARLY_PRINTK_EFI=y
-CONFIG_EARLY_PRINTK_USB_XDBC=y
-CONFIG_X86_PTDUMP_CORE=y
-# CONFIG_X86_PTDUMP is not set
-# CONFIG_EFI_PGT_DUMP is not set
-CONFIG_DEBUG_WX=y
-CONFIG_DOUBLEFAULT=y
-# CONFIG_DEBUG_TLBFLUSH is not set
-# CONFIG_IOMMU_DEBUG is not set
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-# CONFIG_X86_DECODER_SELFTEST is not set
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_UDELAY is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
-# CONFIG_CPA_DEBUG is not set
-# CONFIG_OPTIMIZE_INLINING is not set
-# CONFIG_DEBUG_ENTRY is not set
-# CONFIG_DEBUG_NMI_SELFTEST is not set
-CONFIG_X86_DEBUG_FPU=y
-# CONFIG_PUNIT_ATOM_DEBUG is not set
-CONFIG_UNWINDER_ORC=y
-# CONFIG_UNWINDER_FRAME_POINTER is not set
-
-#
# Security options
#
CONFIG_KEYS=y
@@ -8872,16 +8830,16 @@ CONFIG_PAGE_SANITIZE_VERIFY=y
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
-CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
+# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
-CONFIG_DEFAULT_SECURITY="apparmor"
+CONFIG_LSM="apparmor"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
@@ -8922,7 +8880,6 @@ CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_SIMD=m
@@ -8954,15 +8911,20 @@ CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_NHPOLY1305=m
+CONFIG_CRYPTO_NHPOLY1305_SSE2=m
+CONFIG_CRYPTO_NHPOLY1305_AVX2=m
+CONFIG_CRYPTO_ADIANTUM=m
#
# Hash modes
@@ -8995,13 +8957,11 @@ CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=m
CONFIG_CRYPTO_SHA512_SSSE3=m
-CONFIG_CRYPTO_SHA1_MB=m
-CONFIG_CRYPTO_SHA256_MB=m
-CONFIG_CRYPTO_SHA512_MB=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SM3=m
+CONFIG_CRYPTO_STREEBOG=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
@@ -9040,7 +9000,6 @@ CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_SM4=m
-CONFIG_CRYPTO_SPECK=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
@@ -9073,6 +9032,7 @@ CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_AEAD=m
+# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
@@ -9098,7 +9058,10 @@ CONFIG_CRYPTO_DEV_CHELSIO_TLS=m
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
+CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE=m
CONFIG_X509_CERTIFICATE_PARSER=y
+CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
+CONFIG_TPM_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=m
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
@@ -9113,36 +9076,13 @@ CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_HAVE_KVM_IRQFD=y
-CONFIG_HAVE_KVM_IRQ_ROUTING=y
-CONFIG_HAVE_KVM_EVENTFD=y
-CONFIG_KVM_MMIO=y
-CONFIG_KVM_ASYNC_PF=y
-CONFIG_HAVE_KVM_MSI=y
-CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
-CONFIG_KVM_VFIO=y
-CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
-CONFIG_KVM_COMPAT=y
-CONFIG_HAVE_KVM_IRQ_BYPASS=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=m
-CONFIG_KVM_INTEL=m
-CONFIG_KVM_AMD=m
-CONFIG_KVM_AMD_SEV=y
-# CONFIG_KVM_MMU_AUDIT is not set
-CONFIG_VHOST_NET=m
-CONFIG_VHOST_SCSI=m
-CONFIG_VHOST_VSOCK=m
-CONFIG_VHOST=m
-# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
+CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
@@ -9163,6 +9103,7 @@ CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
+CONFIG_CRC64=m
CONFIG_CRC4=m
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
@@ -9208,7 +9149,7 @@ CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
-CONFIG_RADIX_TREE_MULTIORDER=y
+CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
@@ -9216,9 +9157,21 @@ CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_DMA_DIRECT_OPS=y
+CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_DMA_VIRT_OPS=y
CONFIG_SWIOTLB=y
+CONFIG_DMA_CMA=y
+
+#
+# Default contiguous memory area size:
+#
+CONFIG_CMA_SIZE_MBYTES=0
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_ALIGNMENT=8
+# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
CONFIG_CHECK_SIGNATURE=y
@@ -9249,8 +9202,8 @@ CONFIG_FONT_8x16=y
# CONFIG_FONT_10x18 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_TER16x32 is not set
CONFIG_SG_POOL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_UACCESS_MCSAFE=y
@@ -9258,3 +9211,265 @@ CONFIG_SBITMAP=y
CONFIG_PARMAN=m
CONFIG_PRIME_NUMBERS=m
# CONFIG_STRING_SELFTEST is not set
+CONFIG_OBJAGG=m
+
+#
+# Kernel hacking
+#
+
+#
+# printk and dmesg options
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_PRINTK_CALLER is not set
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=1
+CONFIG_CONSOLE_LOGLEVEL_QUIET=4
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=1
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+
+#
+# Compile-time checks and compiler options
+#
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=0
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_READABLE_ASM is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_SECTION_MISMATCH_WARN_ONLY=y
+# CONFIG_DEBUG_WRITABLE_FUNCTION_POINTERS_VERBOSE is not set
+CONFIG_STACK_VALIDATION=y
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
+CONFIG_MAGIC_SYSRQ_SERIAL=y
+CONFIG_DEBUG_KERNEL=y
+
+#
+# Memory Debugging
+#
+# CONFIG_PAGE_EXTENSION is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PAGE_OWNER is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DEBUG_PAGE_REF is not set
+# CONFIG_DEBUG_RODATA_TEST is not set
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_SLUB_STATS is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
+# CONFIG_DEBUG_VIRTUAL is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
+CONFIG_KASAN_STACK=1
+CONFIG_ARCH_HAS_KCOV=y
+CONFIG_CC_HAS_SANCOV_TRACE_PC=y
+# CONFIG_KCOV is not set
+# CONFIG_DEBUG_SHIRQ is not set
+
+#
+# Debug Lockups and Hangs
+#
+# CONFIG_SOFTLOCKUP_DETECTOR is not set
+CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_WQ_WATCHDOG is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHED_INFO=y
+CONFIG_SCHEDSTATS=y
+CONFIG_SCHED_STACK_END_CHECK=y
+# CONFIG_DEBUG_TIMEKEEPING is not set
+# CONFIG_DEBUG_PREEMPT is not set
+
+#
+# Lock Debugging (spinlocks, mutexes, etc...)
+#
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_LOCK_TORTURE_TEST is not set
+# CONFIG_WW_MUTEX_SELFTEST is not set
+CONFIG_STACKTRACE=y
+# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_PI_LIST=y
+CONFIG_DEBUG_SG=y
+CONFIG_DEBUG_NOTIFIERS=y
+CONFIG_DEBUG_CREDENTIALS=y
+
+#
+# RCU Debugging
+#
+CONFIG_TORTURE_TEST=m
+CONFIG_RCU_PERF_TEST=m
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RCU_EQS_DEBUG is not set
+# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
+# CONFIG_NOTIFIER_ERROR_INJECTION is not set
+CONFIG_FUNCTION_ERROR_INJECTION=y
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_FENTRY=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACE_CLOCK=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+# CONFIG_FUNCTION_GRAPH_TRACER is not set
+# CONFIG_PREEMPTIRQ_EVENTS is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_HWLAT_TRACER is not set
+CONFIG_FTRACE_SYSCALLS=y
+# CONFIG_TRACER_SNAPSHOT is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+CONFIG_STACK_TRACER=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_KPROBE_EVENTS=y
+# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
+# CONFIG_UPROBE_EVENTS is not set
+CONFIG_BPF_EVENTS=y
+CONFIG_DYNAMIC_EVENTS=y
+CONFIG_PROBE_EVENTS=y
+CONFIG_DYNAMIC_FTRACE=y
+CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_FUNCTION_PROFILER=y
+# CONFIG_BPF_KPROBE_OVERRIDE is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+# CONFIG_HIST_TRIGGERS is not set
+# CONFIG_TRACEPOINT_BENCHMARK is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_RING_BUFFER_STARTUP_TEST is not set
+# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
+# CONFIG_TRACE_EVAL_MAP_FILE is not set
+CONFIG_TRACING_EVENTS_GPIO=y
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+CONFIG_RUNTIME_TESTING_MENU=y
+CONFIG_LKDTM=m
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_TEST_SORT is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_RBTREE_TEST is not set
+# CONFIG_INTERVAL_TREE_TEST is not set
+# CONFIG_PERCPU_TEST is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_ASYNC_RAID6_TEST is not set
+# CONFIG_TEST_HEXDUMP is not set
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_TEST_PRINTF is not set
+# CONFIG_TEST_BITMAP is not set
+# CONFIG_TEST_BITFIELD is not set
+# CONFIG_TEST_UUID is not set
+# CONFIG_TEST_XARRAY is not set
+# CONFIG_TEST_OVERFLOW is not set
+# CONFIG_TEST_RHASHTABLE is not set
+# CONFIG_TEST_HASH is not set
+# CONFIG_TEST_IDA is not set
+# CONFIG_TEST_PARMAN is not set
+# CONFIG_TEST_LKM is not set
+# CONFIG_TEST_VMALLOC is not set
+# CONFIG_TEST_USER_COPY is not set
+# CONFIG_TEST_BPF is not set
+# CONFIG_FIND_BIT_BENCHMARK is not set
+# CONFIG_TEST_FIRMWARE is not set
+# CONFIG_TEST_SYSCTL is not set
+# CONFIG_TEST_UDELAY is not set
+# CONFIG_TEST_STATIC_KEYS is not set
+# CONFIG_TEST_KMOD is not set
+# CONFIG_TEST_MEMCAT_P is not set
+# CONFIG_TEST_OBJAGG is not set
+# CONFIG_TEST_STACKINIT is not set
+CONFIG_MEMTEST=y
+# CONFIG_BUG_ON_DATA_CORRUPTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
+# CONFIG_UBSAN is not set
+CONFIG_UBSAN_ALIGNMENT=y
+CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_IO_STRICT_DEVMEM=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_EARLY_PRINTK_USB=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_EARLY_PRINTK_DBGP=y
+CONFIG_EARLY_PRINTK_USB_XDBC=y
+CONFIG_X86_PTDUMP_CORE=y
+# CONFIG_X86_PTDUMP is not set
+# CONFIG_EFI_PGT_DUMP is not set
+CONFIG_DEBUG_WX=y
+CONFIG_DOUBLEFAULT=y
+# CONFIG_DEBUG_TLBFLUSH is not set
+# CONFIG_IOMMU_DEBUG is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+# CONFIG_X86_DECODER_SELFTEST is not set
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+# CONFIG_OPTIMIZE_INLINING is not set
+# CONFIG_DEBUG_ENTRY is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+CONFIG_X86_DEBUG_FPU=y
+# CONFIG_PUNIT_ATOM_DEBUG is not set
+CONFIG_UNWINDER_ORC=y
+# CONFIG_UNWINDER_FRAME_POINTER is not set
diff --git a/sys-kernel/linux-sources-redcore/files/ata-fix-NCQ-LOG-strings-and-move-to-debug.patch b/sys-kernel/linux-sources-redcore/files/5.1-ata-fix-NCQ-LOG-strings-and-move-to-debug.patch
index 344a8c4b..344a8c4b 100644
--- a/sys-kernel/linux-sources-redcore/files/ata-fix-NCQ-LOG-strings-and-move-to-debug.patch
+++ b/sys-kernel/linux-sources-redcore/files/5.1-ata-fix-NCQ-LOG-strings-and-move-to-debug.patch
diff --git a/sys-kernel/linux-sources-redcore/files/drop_ancient-and-wrong-msg.patch b/sys-kernel/linux-sources-redcore/files/5.1-drop_ancient-and-wrong-msg.patch
index f184b08e..f184b08e 100644
--- a/sys-kernel/linux-sources-redcore/files/drop_ancient-and-wrong-msg.patch
+++ b/sys-kernel/linux-sources-redcore/files/5.1-drop_ancient-and-wrong-msg.patch
diff --git a/sys-kernel/linux-sources-redcore/files/enable_alx_wol.patch b/sys-kernel/linux-sources-redcore/files/5.1-enable_alx_wol.patch
index 1b7f6e13..1b7f6e13 100644
--- a/sys-kernel/linux-sources-redcore/files/enable_alx_wol.patch
+++ b/sys-kernel/linux-sources-redcore/files/5.1-enable_alx_wol.patch
diff --git a/sys-kernel/linux-sources-redcore/files/5.1-fix-acpi_dbg_level.patch b/sys-kernel/linux-sources-redcore/files/5.1-fix-acpi_dbg_level.patch
new file mode 100644
index 00000000..d7fb610f
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore/files/5.1-fix-acpi_dbg_level.patch
@@ -0,0 +1,12 @@
+diff -Naur linux-5.1/drivers/acpi/bus.c linux-5.1-p/drivers/acpi/bus.c
+--- linux-5.1/drivers/acpi/bus.c 2019-05-06 02:42:58.000000000 +0200
++++ linux-5.1-p/drivers/acpi/bus.c 2019-05-07 08:50:58.819866218 +0200
+@@ -1043,6 +1043,8 @@
+
+ acpi_permanent_mmap = true;
+
++ acpi_dbg_level = ACPI_LV_INFO | ACPI_LV_REPAIR;
++
+ #ifdef CONFIG_X86
+ /*
+ * If the machine falls into the DMI check table,
diff --git a/sys-kernel/linux-sources-redcore/files/linux-hardened.patch b/sys-kernel/linux-sources-redcore/files/5.1-linux-hardened.patch
index 7a46a91b..cfb24d72 100644
--- a/sys-kernel/linux-sources-redcore/files/linux-hardened.patch
+++ b/sys-kernel/linux-sources-redcore/files/5.1-linux-hardened.patch
@@ -1,8 +1,8 @@
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
-index 1370b424a453..54d7125d6912 100644
+index c7937f379d22..6a9c38fdd2e9 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
-@@ -496,16 +496,6 @@
+@@ -505,16 +505,6 @@
nosocket -- Disable socket memory accounting.
nokmem -- Disable kernel memory accounting.
@@ -19,7 +19,7 @@ index 1370b424a453..54d7125d6912 100644
cio_ignore= [S390]
See Documentation/s390/CommonIO for details.
clk_ignore_unused
-@@ -3066,6 +3056,11 @@
+@@ -3241,6 +3231,11 @@
the specified number of seconds. This is to be used if
your oopses keep scrolling off the screen.
@@ -32,18 +32,18 @@ index 1370b424a453..54d7125d6912 100644
pcd. [PARIDE]
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
-index eded671d55eb..0abfc33f101d 100644
+index aa058aa7bf28..228632fa5f66 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
-@@ -92,6 +92,7 @@ show up in /proc/sys/kernel:
+@@ -97,6 +97,7 @@ show up in /proc/sys/kernel:
- sysctl_writes_strict
- - tainted
+ - tainted ==> Documentation/admin-guide/tainted-kernels.rst
- threads-max
+- tiocsti_restrict
- unknown_nmi_panic
- watchdog
- watchdog_thresh
-@@ -1016,6 +1017,26 @@ available RAM pages threads-max is reduced accordingly.
+@@ -1082,6 +1083,26 @@ available RAM pages threads-max is reduced accordingly.
==============================================================
@@ -71,13 +71,13 @@ index eded671d55eb..0abfc33f101d 100644
The value in this file affects behavior of handling NMI. When the
diff --git a/Makefile b/Makefile
-index a41692c5827a..ce817616d8a9 100644
+index d7b3c8e3ff3e..029b58e4e67f 100644
--- a/Makefile
+++ b/Makefile
-@@ -688,6 +688,9 @@ stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG) := -fstack-protector-strong
+@@ -717,6 +717,9 @@ stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG) := -fstack-protector-strong
KBUILD_CFLAGS += $(stackp-flags-y)
- ifeq ($(cc-name),clang)
+ ifdef CONFIG_CC_IS_CLANG
+ifdef CONFIG_LOCAL_INIT
+KBUILD_CFLAGS += -fsanitize=local-init
+endif
@@ -85,22 +85,10 @@ index a41692c5827a..ce817616d8a9 100644
KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
diff --git a/arch/Kconfig b/arch/Kconfig
-index d1f2ed462ac8..19a595a47dae 100644
+index 9092e0ffe4d3..837a0297b720 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
-@@ -470,6 +470,11 @@ config GCC_PLUGIN_LATENT_ENTROPY
- is some slowdown of the boot process (about 0.5%) and fork and
- irq processing.
-
-+ When extra_latent_entropy is passed on the kernel command line,
-+ entropy will be extracted from up to the first 4GB of RAM while the
-+ runtime memory allocator is being initialized. This costs even more
-+ slowdown of the boot process.
-+
- Note that entropy extracted this way is not cryptographically
- secure!
-
-@@ -731,7 +736,7 @@ config ARCH_MMAP_RND_BITS
+@@ -631,7 +631,7 @@ config ARCH_MMAP_RND_BITS
int "Number of bits to use for ASLR of mmap base address" if EXPERT
range ARCH_MMAP_RND_BITS_MIN ARCH_MMAP_RND_BITS_MAX
default ARCH_MMAP_RND_BITS_DEFAULT if ARCH_MMAP_RND_BITS_DEFAULT
@@ -109,7 +97,7 @@ index d1f2ed462ac8..19a595a47dae 100644
depends on HAVE_ARCH_MMAP_RND_BITS
help
This value can be used to select the number of bits to use to
-@@ -765,7 +770,7 @@ config ARCH_MMAP_RND_COMPAT_BITS
+@@ -665,7 +665,7 @@ config ARCH_MMAP_RND_COMPAT_BITS
int "Number of bits to use for ASLR of mmap base address for compatible applications" if EXPERT
range ARCH_MMAP_RND_COMPAT_BITS_MIN ARCH_MMAP_RND_COMPAT_BITS_MAX
default ARCH_MMAP_RND_COMPAT_BITS_DEFAULT if ARCH_MMAP_RND_COMPAT_BITS_DEFAULT
@@ -118,7 +106,7 @@ index d1f2ed462ac8..19a595a47dae 100644
depends on HAVE_ARCH_MMAP_RND_COMPAT_BITS
help
This value can be used to select the number of bits to use to
-@@ -967,6 +972,7 @@ config ARCH_HAS_REFCOUNT
+@@ -873,6 +873,7 @@ config ARCH_HAS_REFCOUNT
config REFCOUNT_FULL
bool "Perform full reference count validation at the expense of speed"
@@ -127,10 +115,10 @@ index d1f2ed462ac8..19a595a47dae 100644
Enabling this switches the refcounting infrastructure from a fast
unchecked atomic_t implementation to a fully state checked
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
-index 42c090cf0292..a6e2276009e4 100644
+index d218729ec852..d0e94e76885f 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
-@@ -1005,6 +1005,7 @@ endif
+@@ -1166,6 +1166,7 @@ endif
config ARM64_SW_TTBR0_PAN
bool "Emulate Privileged Access Never using TTBR0_EL1 switching"
@@ -138,7 +126,7 @@ index 42c090cf0292..a6e2276009e4 100644
help
Enabling this option prevents the kernel from accessing
user-space memory directly by pointing TTBR0_EL1 to a reserved
-@@ -1180,6 +1181,7 @@ config RANDOMIZE_BASE
+@@ -1393,6 +1394,7 @@ config RANDOMIZE_BASE
bool "Randomize the address of the kernel image"
select ARM64_MODULE_PLTS if MODULES
select RELOCATABLE
@@ -147,10 +135,10 @@ index 42c090cf0292..a6e2276009e4 100644
Randomizes the virtual address at which the kernel image is
loaded, as a security feature that deters exploit attempts
diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug
-index cc6bd559af85..01d5442d4722 100644
+index 69c9170bdd24..a786227db0e3 100644
--- a/arch/arm64/Kconfig.debug
+++ b/arch/arm64/Kconfig.debug
-@@ -45,6 +45,7 @@ config ARM64_RANDOMIZE_TEXT_OFFSET
+@@ -42,6 +42,7 @@ config ARM64_RANDOMIZE_TEXT_OFFSET
config DEBUG_WX
bool "Warn on W+X mappings at boot"
select ARM64_PTDUMP_CORE
@@ -159,7 +147,7 @@ index cc6bd559af85..01d5442d4722 100644
Generate a warning if any W+X mappings are found at boot.
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
-index f9a186f6af8a..e628231a5a92 100644
+index 32fb03503b0b..228d3770d924 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1,4 +1,3 @@
@@ -168,10 +156,10 @@ index f9a186f6af8a..e628231a5a92 100644
CONFIG_AUDIT=y
CONFIG_NO_HZ_IDLE=y
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
-index 433b9554c6a1..1f4b06317c9f 100644
+index 6adc1a90e7e6..1f4b06317c9f 100644
--- a/arch/arm64/include/asm/elf.h
+++ b/arch/arm64/include/asm/elf.h
-@@ -114,10 +114,10 @@
+@@ -114,14 +114,10 @@
/*
* This is the base location for PIE (ET_DYN with INTERP) loads. On
@@ -179,12 +167,16 @@ index 433b9554c6a1..1f4b06317c9f 100644
+ * 64-bit, this is raised to 4GB to leave the entire 32-bit address
* space open for things that want to use the area for 32-bit pointers.
*/
+-#ifdef CONFIG_ARM64_FORCE_52BIT
-#define ELF_ET_DYN_BASE (2 * TASK_SIZE_64 / 3)
+-#else
+-#define ELF_ET_DYN_BASE (2 * DEFAULT_MAP_WINDOW_64 / 3)
+-#endif /* CONFIG_ARM64_FORCE_52BIT */
+#define ELF_ET_DYN_BASE 0x100000000UL
#ifndef __ASSEMBLY__
-@@ -171,10 +171,10 @@ extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+@@ -175,10 +171,10 @@ extern int arch_setup_additional_pages(struct linux_binprm *bprm,
/* 1GB of VA */
#ifdef CONFIG_COMPAT
#define STACK_RND_MASK (test_thread_flag(TIF_32BIT) ? \
@@ -199,10 +191,10 @@ index 433b9554c6a1..1f4b06317c9f 100644
#ifdef __AARCH64EB__
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
-index e10bc363f533..8e5701978b7c 100644
+index 3767fb21a5b8..776cf5d48f7d 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
-@@ -481,9 +481,9 @@ unsigned long arch_align_stack(unsigned long sp)
+@@ -538,9 +538,9 @@ unsigned long arch_align_stack(unsigned long sp)
unsigned long arch_randomize_brk(struct mm_struct *mm)
{
if (is_compat_task())
@@ -215,7 +207,7 @@ index e10bc363f533..8e5701978b7c 100644
/*
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
-index 6b8065d718bd..347c8d1c3a45 100644
+index 62fc3fda1a05..fe5f612d7014 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1202,8 +1202,7 @@ config VM86
@@ -228,7 +220,7 @@ index 6b8065d718bd..347c8d1c3a45 100644
depends on MODIFY_LDT_SYSCALL
---help---
This option is required by programs like Wine to run 16-bit
-@@ -2295,7 +2294,7 @@ config COMPAT_VDSO
+@@ -2291,7 +2290,7 @@ config COMPAT_VDSO
choice
prompt "vsyscall table for legacy applications"
depends on X86_64
@@ -237,7 +229,7 @@ index 6b8065d718bd..347c8d1c3a45 100644
help
Legacy user code that does not know how to find the vDSO expects
to be able to issue three syscalls by calling fixed addresses in
-@@ -2376,8 +2375,7 @@ config CMDLINE_OVERRIDE
+@@ -2372,8 +2371,7 @@ config CMDLINE_OVERRIDE
be set to 'N' under normal conditions.
config MODIFY_LDT_SYSCALL
@@ -248,10 +240,10 @@ index 6b8065d718bd..347c8d1c3a45 100644
Linux can allow user programs to install a per-process x86
Local Descriptor Table (LDT) using the modify_ldt(2) system
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
-index c6dd1d980081..0acf0d1d67de 100644
+index 15d0fbe27872..5c32c9818bd4 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
-@@ -104,6 +104,7 @@ config EFI_PGT_DUMP
+@@ -91,6 +91,7 @@ config EFI_PGT_DUMP
config DEBUG_WX
bool "Warn on W+X mappings at boot"
select X86_PTDUMP_CORE
@@ -260,7 +252,7 @@ index c6dd1d980081..0acf0d1d67de 100644
Generate a warning if any W+X mappings are found at boot.
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
-index e32fc1f274d8..d08acc76502a 100644
+index 1d3badfda09e..bd67e1778ffa 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1,5 +1,4 @@
@@ -270,10 +262,10 @@ index e32fc1f274d8..d08acc76502a 100644
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_TASKSTATS=y
diff --git a/arch/x86/entry/vdso/vma.c b/arch/x86/entry/vdso/vma.c
-index 5b8b556dbb12..a569f08b4478 100644
+index babc4e7a519c..197b79a50bf5 100644
--- a/arch/x86/entry/vdso/vma.c
+++ b/arch/x86/entry/vdso/vma.c
-@@ -204,55 +204,9 @@ static int map_vdso(const struct vdso_image *image, unsigned long addr)
+@@ -198,55 +198,9 @@ static int map_vdso(const struct vdso_image *image, unsigned long addr)
}
#ifdef CONFIG_X86_64
@@ -331,10 +323,10 @@ index 5b8b556dbb12..a569f08b4478 100644
#endif
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
-index 0d157d2a1e2a..770c8ae97f92 100644
+index 69c0f892e310..f9f7a85bb71e 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
-@@ -249,11 +249,11 @@ extern int force_personality32;
+@@ -248,11 +248,11 @@ extern int force_personality32;
/*
* This is the base location for PIE (ET_DYN with INTERP) loads. On
@@ -348,7 +340,7 @@ index 0d157d2a1e2a..770c8ae97f92 100644
/* This yields a mask that user programs can use to figure out what
instruction set this CPU supports. This could be done in user space,
-@@ -313,8 +313,8 @@ extern bool mmap_address_hint_valid(unsigned long addr, unsigned long len);
+@@ -312,8 +312,8 @@ extern bool mmap_address_hint_valid(unsigned long addr, unsigned long len);
#ifdef CONFIG_X86_32
@@ -359,7 +351,7 @@ index 0d157d2a1e2a..770c8ae97f92 100644
#define ARCH_DLINFO ARCH_DLINFO_IA32
-@@ -323,7 +323,11 @@ extern bool mmap_address_hint_valid(unsigned long addr, unsigned long len);
+@@ -322,7 +322,11 @@ extern bool mmap_address_hint_valid(unsigned long addr, unsigned long len);
#else /* CONFIG_X86_32 */
/* 1GB for 64bit, 8MB for 32bit */
@@ -372,17 +364,17 @@ index 0d157d2a1e2a..770c8ae97f92 100644
#define STACK_RND_MASK __STACK_RND_MASK(mmap_is_ia32())
#define ARCH_DLINFO \
-@@ -381,5 +385,4 @@ struct va_alignment {
+@@ -380,5 +384,4 @@ struct va_alignment {
} ____cacheline_aligned;
extern struct va_alignment va_align;
-extern unsigned long align_vdso_addr(unsigned long);
#endif /* _ASM_X86_ELF_H */
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
-index 6690cd3fc8b1..300a1c2819fb 100644
+index f4204bf377fc..8ccc7aa0ece0 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
-@@ -266,6 +266,7 @@ static inline void cr4_set_bits(unsigned long mask)
+@@ -294,6 +294,7 @@ static inline void cr4_set_bits(unsigned long mask)
local_irq_save(flags);
cr4 = this_cpu_read(cpu_tlbstate.cr4);
@@ -390,7 +382,7 @@ index 6690cd3fc8b1..300a1c2819fb 100644
if ((cr4 | mask) != cr4)
__cr4_set(cr4 | mask);
local_irq_restore(flags);
-@@ -278,6 +279,7 @@ static inline void cr4_clear_bits(unsigned long mask)
+@@ -306,6 +307,7 @@ static inline void cr4_clear_bits(unsigned long mask)
local_irq_save(flags);
cr4 = this_cpu_read(cpu_tlbstate.cr4);
@@ -398,7 +390,7 @@ index 6690cd3fc8b1..300a1c2819fb 100644
if ((cr4 & ~mask) != cr4)
__cr4_set(cr4 & ~mask);
local_irq_restore(flags);
-@@ -288,6 +290,7 @@ static inline void cr4_toggle_bits_irqsoff(unsigned long mask)
+@@ -316,6 +318,7 @@ static inline void cr4_toggle_bits_irqsoff(unsigned long mask)
unsigned long cr4;
cr4 = this_cpu_read(cpu_tlbstate.cr4);
@@ -406,7 +398,7 @@ index 6690cd3fc8b1..300a1c2819fb 100644
__cr4_set(cr4 ^ mask);
}
-@@ -394,6 +397,7 @@ static inline void __native_flush_tlb_global(void)
+@@ -422,6 +425,7 @@ static inline void __native_flush_tlb_global(void)
raw_local_irq_save(flags);
cr4 = this_cpu_read(cpu_tlbstate.cr4);
@@ -415,10 +407,10 @@ index 6690cd3fc8b1..300a1c2819fb 100644
native_write_cr4(cr4 ^ X86_CR4_PGE);
/* write old PGE again and flush TLBs */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
-index b41b72bd8bb8..d54a3c30902a 100644
+index 132a63dc5a76..05c8de9b452e 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
-@@ -1726,7 +1726,6 @@ void cpu_init(void)
+@@ -1768,7 +1768,6 @@ void cpu_init(void)
wrmsrl(MSR_KERNEL_GS_BASE, 0);
barrier();
@@ -427,19 +419,19 @@ index b41b72bd8bb8..d54a3c30902a 100644
/*
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
-index 30ca2d1a9231..bde0a18cd9f9 100644
+index 957eae13b370..01b7bb76bdbc 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
-@@ -39,6 +39,8 @@
- #include <asm/desc.h>
+@@ -42,6 +42,8 @@
#include <asm/prctl.h>
#include <asm/spec-ctrl.h>
+ #include <asm/proto.h>
+#include <asm/elf.h>
+#include <linux/sizes.h>
- /*
- * per-CPU TSS segments. Threads are completely 'soft' on Linux,
-@@ -718,7 +720,10 @@ unsigned long arch_align_stack(unsigned long sp)
+ #include "process.h"
+
+@@ -798,7 +800,10 @@ unsigned long arch_align_stack(unsigned long sp)
unsigned long arch_randomize_brk(struct mm_struct *mm)
{
@@ -452,7 +444,7 @@ index 30ca2d1a9231..bde0a18cd9f9 100644
/*
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
-index 6a78d4b36a79..715009f7a96c 100644
+index f7476ce23b6e..652169a2b23a 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -54,13 +54,6 @@ static unsigned long get_align_bits(void)
@@ -473,7 +465,7 @@ index 6a78d4b36a79..715009f7a96c 100644
}
*begin = get_mmap_base(1);
-- if (in_compat_syscall())
+- if (in_32bit_syscall())
- *end = task_size_32bit();
- else
- *end = task_size_64bit(addr > DEFAULT_MAP_WINDOW);
@@ -491,10 +483,10 @@ index 6a78d4b36a79..715009f7a96c 100644
/*
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
-index 979e0a02cbe1..d6ab882a0091 100644
+index 85c94f9a87f8..6b14ddb6c688 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
-@@ -560,9 +560,9 @@ static void __init pagetable_init(void)
+@@ -559,9 +559,9 @@ static void __init pagetable_init(void)
#define DEFAULT_PTE_MASK ~(_PAGE_NX | _PAGE_GLOBAL)
/* Bits supported by the hardware: */
@@ -506,34 +498,11 @@ index 979e0a02cbe1..d6ab882a0091 100644
EXPORT_SYMBOL_GPL(__supported_pte_mask);
/* Used in PAGE_KERNEL_* macros which are reasonably used out-of-tree: */
EXPORT_SYMBOL(__default_kernel_pte_mask);
-@@ -873,7 +873,7 @@ int arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
- #endif
- #endif
-
--int kernel_set_to_readonly __read_mostly;
-+int kernel_set_to_readonly __ro_after_init;
-
- void set_kernel_text_rw(void)
- {
-@@ -925,12 +925,11 @@ void mark_rodata_ro(void)
- unsigned long start = PFN_ALIGN(_text);
- unsigned long size = PFN_ALIGN(_etext) - start;
-
-+ kernel_set_to_readonly = 1;
- set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
- printk(KERN_INFO "Write protecting the kernel text: %luk\n",
- size >> 10);
-
-- kernel_set_to_readonly = 1;
--
- #ifdef CONFIG_CPA_DEBUG
- printk(KERN_INFO "Testing CPA: Reverting %lx-%lx\n",
- start, start+size);
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
-index 68c292cb1ebf..b81cd1f2d6df 100644
+index bccff68e3267..b4e3a62c2e50 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
-@@ -66,9 +66,9 @@
+@@ -65,9 +65,9 @@
*/
/* Bits supported by the hardware: */
@@ -545,28 +514,8 @@ index 68c292cb1ebf..b81cd1f2d6df 100644
EXPORT_SYMBOL_GPL(__supported_pte_mask);
/* Used in PAGE_KERNEL_* macros which are reasonably used out-of-tree: */
EXPORT_SYMBOL(__default_kernel_pte_mask);
-@@ -1207,7 +1207,7 @@ void __init mem_init(void)
- mem_init_print_info(NULL);
- }
-
--int kernel_set_to_readonly;
-+int kernel_set_to_readonly __ro_after_init;
-
- void set_kernel_text_rw(void)
- {
-@@ -1256,9 +1256,8 @@ void mark_rodata_ro(void)
-
- printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
- (end - start) >> 10);
-- set_memory_ro(start, (end - start) >> PAGE_SHIFT);
--
- kernel_set_to_readonly = 1;
-+ set_memory_ro(start, (end - start) >> PAGE_SHIFT);
-
- /*
- * The rodata/data/bss/brk section (but not the kernel text!)
diff --git a/block/blk-softirq.c b/block/blk-softirq.c
-index 15c1f5e12eb8..ff72cccec5b8 100644
+index 457d9ba3eb20..5f987fc1c0a0 100644
--- a/block/blk-softirq.c
+++ b/block/blk-softirq.c
@@ -20,7 +20,7 @@ static DEFINE_PER_CPU(struct list_head, blk_cpu_done);
@@ -579,10 +528,10 @@ index 15c1f5e12eb8..ff72cccec5b8 100644
struct list_head *cpu_list, local_list;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
-index cc71c63df381..44432ecffbcd 100644
+index 133fed8e4a8b..a04fccec45db 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
-@@ -5154,7 +5154,7 @@ void ata_qc_free(struct ata_queued_cmd *qc)
+@@ -5161,7 +5161,7 @@ void ata_qc_free(struct ata_queued_cmd *qc)
struct ata_port *ap;
unsigned int tag;
@@ -591,7 +540,7 @@ index cc71c63df381..44432ecffbcd 100644
ap = qc->ap;
qc->flags = 0;
-@@ -5171,7 +5171,7 @@ void __ata_qc_complete(struct ata_queued_cmd *qc)
+@@ -5178,7 +5178,7 @@ void __ata_qc_complete(struct ata_queued_cmd *qc)
struct ata_port *ap;
struct ata_link *link;
@@ -601,7 +550,7 @@ index cc71c63df381..44432ecffbcd 100644
ap = qc->ap;
link = qc->dev->link;
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
-index 212f447938ae..0982c7ddd88c 100644
+index 466ebd84ad17..a093e3f158c9 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -9,7 +9,6 @@ source "drivers/tty/Kconfig"
@@ -612,7 +561,7 @@ index 212f447938ae..0982c7ddd88c 100644
help
Say Y here if you want to support the /dev/mem device.
The /dev/mem device is used to access areas of physical
-@@ -531,7 +530,6 @@ config TELCLOCK
+@@ -536,7 +535,6 @@ config TELCLOCK
config DEVPORT
bool "/dev/port character device"
depends on ISA || PCI
@@ -621,7 +570,7 @@ index 212f447938ae..0982c7ddd88c 100644
Say Y here if you want to support the /dev/port device. The /dev/port
device is similar to /dev/mem, but for I/O ports.
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
-index 0840d27381ea..ae292fcedaca 100644
+index e0a04bfc873e..ec93f827c599 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -122,7 +122,6 @@ config UNIX98_PTYS
@@ -633,10 +582,10 @@ index 0840d27381ea..ae292fcedaca 100644
A pseudo terminal (PTY) is a software device consisting of two
halves: a master and a slave. The slave device behaves identical to
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
-index aba59521ad48..90d4779683a3 100644
+index 5fa250157025..fabcb1ebd24b 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
-@@ -172,6 +172,7 @@ static void free_tty_struct(struct tty_struct *tty)
+@@ -173,6 +173,7 @@ static void free_tty_struct(struct tty_struct *tty)
put_device(tty->dev);
kfree(tty->write_buf);
tty->magic = 0xDEADDEAD;
@@ -644,7 +593,7 @@ index aba59521ad48..90d4779683a3 100644
kfree(tty);
}
-@@ -2164,11 +2165,19 @@ static int tty_fasync(int fd, struct file *filp, int on)
+@@ -2178,11 +2179,19 @@ static int tty_fasync(int fd, struct file *filp, int on)
* FIXME: may race normal receive processing
*/
@@ -664,7 +613,7 @@ index aba59521ad48..90d4779683a3 100644
if ((current->signal->tty != tty) && !capable(CAP_SYS_ADMIN))
return -EPERM;
if (get_user(ch, p))
-@@ -2851,6 +2860,7 @@ struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx)
+@@ -3008,6 +3017,7 @@ struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx)
tty->index = idx;
tty_line_name(driver, idx, tty->name);
tty->dev = tty_get_device(tty);
@@ -672,11 +621,26 @@ index aba59521ad48..90d4779683a3 100644
return tty;
}
+diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
+index e38f104db174..8570a8514e46 100644
+--- a/drivers/tty/tty_ldisc.c
++++ b/drivers/tty/tty_ldisc.c
+@@ -855,8 +855,8 @@ void tty_ldisc_deinit(struct tty_struct *tty)
+ tty->ldisc = NULL;
+ }
+
+-static int zero;
+-static int one = 1;
++static int zero __read_only;
++static int one __read_only = 1;
+ static struct ctl_table tty_table[] = {
+ {
+ .procname = "ldisc_autoload",
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
-index 1fb266809966..db145cb734e4 100644
+index 310eef451db8..2c4c1f7045bf 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
-@@ -41,6 +41,8 @@
+@@ -42,6 +42,8 @@
#define USB_TP_TRANSMISSION_DELAY 40 /* ns */
#define USB_TP_TRANSMISSION_DELAY_MAX 65535 /* ns */
@@ -685,7 +649,7 @@ index 1fb266809966..db145cb734e4 100644
/* Protect struct usb_device->state and ->children members
* Note: Both are also protected by ->dev.sem, except that ->state can
* change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
-@@ -4881,6 +4883,12 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
+@@ -4981,6 +4983,12 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
goto done;
return;
}
@@ -699,7 +663,7 @@ index 1fb266809966..db145cb734e4 100644
unit_load = 150;
else
diff --git a/fs/exec.c b/fs/exec.c
-index bdd0eacefdf5..20908a84550c 100644
+index 2e0033348d8e..003933540718 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -62,6 +62,7 @@
@@ -710,7 +674,7 @@ index bdd0eacefdf5..20908a84550c 100644
#include <linux/uaccess.h>
#include <asm/mmu_context.h>
-@@ -320,6 +321,8 @@ static int __bprm_mm_init(struct linux_binprm *bprm)
+@@ -275,6 +276,8 @@ static int __bprm_mm_init(struct linux_binprm *bprm)
arch_bprm_mm_init(mm, vma);
up_write(&mm->mmap_sem);
bprm->p = vma->vm_end - sizeof(void *);
@@ -720,17 +684,21 @@ index bdd0eacefdf5..20908a84550c 100644
err:
up_write(&mm->mmap_sem);
diff --git a/fs/namei.c b/fs/namei.c
-index 734cef54fdf8..8e3b3ae0cf30 100644
+index dede0147b3f6..c708a5887276 100644
--- a/fs/namei.c
+++ b/fs/namei.c
-@@ -885,8 +885,8 @@ static inline void put_link(struct nameidata *nd)
+@@ -883,10 +883,10 @@ static inline void put_link(struct nameidata *nd)
path_put(&last->link);
}
-int sysctl_protected_symlinks __read_mostly = 0;
-int sysctl_protected_hardlinks __read_mostly = 0;
+-int sysctl_protected_fifos __read_mostly;
+-int sysctl_protected_regular __read_mostly;
+int sysctl_protected_symlinks __read_mostly = 1;
+int sysctl_protected_hardlinks __read_mostly = 1;
++int sysctl_protected_fifos __read_mostly = 2;
++int sysctl_protected_regular __read_mostly = 2;
/**
* may_follow_link - Check symlink following for unsafe situations
@@ -744,10 +712,10 @@ index 5f93cfacb3d1..cea0d7d3b23e 100644
select CRC32
- default y
diff --git a/fs/proc/Kconfig b/fs/proc/Kconfig
-index 0eaeb41453f5..8cd1e66aa408 100644
+index 817c02b13b1d..b8cd62b5cbc3 100644
--- a/fs/proc/Kconfig
+++ b/fs/proc/Kconfig
-@@ -39,7 +39,6 @@ config PROC_KCORE
+@@ -40,7 +40,6 @@ config PROC_KCORE
config PROC_VMCORE
bool "/proc/vmcore support"
depends on PROC_FS && CRASH_DUMP
@@ -756,7 +724,7 @@ index 0eaeb41453f5..8cd1e66aa408 100644
Exports the dump image of crashed kernel in ELF format.
diff --git a/fs/stat.c b/fs/stat.c
-index f8e6fb2c3657..240c1432e18f 100644
+index c38e4c2e1221..6135fbaf7298 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -40,8 +40,13 @@ void generic_fillattr(struct inode *inode, struct kstat *stat)
@@ -775,10 +743,10 @@ index f8e6fb2c3657..240c1432e18f 100644
stat->ctime = inode->i_ctime;
stat->blksize = i_blocksize(inode);
stat->blocks = inode->i_blocks;
-@@ -75,9 +80,14 @@ int vfs_getattr_nosec(const struct path *path, struct kstat *stat,
- stat->result_mask |= STATX_BASIC_STATS;
- request_mask &= STATX_ALL;
- query_flags &= KSTAT_QUERY_FLAGS;
+@@ -77,9 +82,14 @@ int vfs_getattr_nosec(const struct path *path, struct kstat *stat,
+ if (IS_AUTOMOUNT(inode))
+ stat->attributes |= STATX_ATTR_AUTOMOUNT;
+
- if (inode->i_op->getattr)
- return inode->i_op->getattr(path, stat, request_mask,
- query_flags);
@@ -807,18 +775,18 @@ index 750621e41d1c..e7157c18c62c 100644
#define ____cacheline_aligned __attribute__((__aligned__(SMP_CACHE_BYTES)))
#endif
diff --git a/include/linux/capability.h b/include/linux/capability.h
-index f640dcbc880c..2b4f5d651f19 100644
+index ecce0f43c73a..e46306dd4401 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
-@@ -207,6 +207,7 @@ extern bool has_capability_noaudit(struct task_struct *t, int cap);
+@@ -208,6 +208,7 @@ extern bool has_capability_noaudit(struct task_struct *t, int cap);
extern bool has_ns_capability_noaudit(struct task_struct *t,
struct user_namespace *ns, int cap);
extern bool capable(int cap);
+extern bool capable_noaudit(int cap);
extern bool ns_capable(struct user_namespace *ns, int cap);
extern bool ns_capable_noaudit(struct user_namespace *ns, int cap);
- #else
-@@ -232,6 +233,10 @@ static inline bool capable(int cap)
+ extern bool ns_capable_setid(struct user_namespace *ns, int cap);
+@@ -234,6 +235,10 @@ static inline bool capable(int cap)
{
return true;
}
@@ -830,12 +798,12 @@ index f640dcbc880c..2b4f5d651f19 100644
{
return true;
diff --git a/include/linux/fs.h b/include/linux/fs.h
-index 805bf22898cf..e3a036f29e69 100644
+index dd28e7679089..cc0030c688d1 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
-@@ -3438,4 +3438,15 @@ static inline bool dir_relax_shared(struct inode *inode)
- extern bool path_noexec(const struct path *path);
- extern void inode_nohighmem(struct inode *inode);
+@@ -3534,4 +3534,15 @@ static inline struct sock *io_uring_get_socket(struct file *file)
+ }
+ #endif
+extern int device_sidechannel_restrict;
+
@@ -850,11 +818,11 @@ index 805bf22898cf..e3a036f29e69 100644
+
#endif /* _LINUX_FS_H */
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
-index bdaf22582f6e..326ff15d4637 100644
+index e30d6132c633..d62017d489fa 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
-@@ -181,6 +181,9 @@ static inline void fsnotify_access(struct file *file)
- struct inode *inode = path->dentry->d_inode;
+@@ -207,6 +207,9 @@ static inline void fsnotify_access(struct file *file)
+ struct inode *inode = file_inode(file);
__u32 mask = FS_ACCESS;
+ if (is_sidechannel_device(inode))
@@ -863,8 +831,8 @@ index bdaf22582f6e..326ff15d4637 100644
if (S_ISDIR(inode->i_mode))
mask |= FS_ISDIR;
-@@ -199,6 +202,9 @@ static inline void fsnotify_modify(struct file *file)
- struct inode *inode = path->dentry->d_inode;
+@@ -223,6 +226,9 @@ static inline void fsnotify_modify(struct file *file)
+ struct inode *inode = file_inode(file);
__u32 mask = FS_MODIFY;
+ if (is_sidechannel_device(inode))
@@ -874,10 +842,10 @@ index bdaf22582f6e..326ff15d4637 100644
mask |= FS_ISDIR;
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
-index a6afcec53795..dea3241398bb 100644
+index fdab7de7490d..13755aff72ab 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
-@@ -513,9 +513,9 @@ extern struct page *alloc_pages_vma(gfp_t gfp_mask, int order,
+@@ -530,9 +530,9 @@ extern struct page *alloc_pages_vma(gfp_t gfp_mask, int order,
extern unsigned long __get_free_pages(gfp_t gfp_mask, unsigned int order);
extern unsigned long get_zeroed_page(gfp_t gfp_mask);
@@ -890,10 +858,10 @@ index a6afcec53795..dea3241398bb 100644
#define __get_free_page(gfp_mask) \
__get_free_pages((gfp_mask), 0)
diff --git a/include/linux/highmem.h b/include/linux/highmem.h
-index 0690679832d4..b9394bc86fad 100644
+index ea5cdbd8c2c3..805b84d6bbca 100644
--- a/include/linux/highmem.h
+++ b/include/linux/highmem.h
-@@ -191,6 +191,13 @@ static inline void clear_highpage(struct page *page)
+@@ -215,6 +215,13 @@ static inline void clear_highpage(struct page *page)
kunmap_atomic(kaddr);
}
@@ -908,10 +876,10 @@ index 0690679832d4..b9394bc86fad 100644
unsigned start1, unsigned end1,
unsigned start2, unsigned end2)
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
-index eeceac3376fc..78ad558bce5f 100644
+index 690b238a44d5..06e831f45016 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
-@@ -490,7 +490,7 @@ extern const char * const softirq_to_name[NR_SOFTIRQS];
+@@ -535,7 +535,7 @@ extern const char * const softirq_to_name[NR_SOFTIRQS];
struct softirq_action
{
@@ -920,7 +888,7 @@ index eeceac3376fc..78ad558bce5f 100644
};
asmlinkage void do_softirq(void);
-@@ -505,7 +505,7 @@ static inline void do_softirq_own_stack(void)
+@@ -550,7 +550,7 @@ static inline void do_softirq_own_stack(void)
}
#endif
@@ -943,10 +911,10 @@ index 069aa2ebef90..cb9e3637a620 100644
const struct kobj_ns_type_operations *kobj_child_ns_ops(struct kobject *parent);
const struct kobj_ns_type_operations *kobj_ns_ops(struct kobject *kobj);
diff --git a/include/linux/mm.h b/include/linux/mm.h
-index 68a5121694ef..4f6c2e842744 100644
+index 6b10c21630f5..e992a6c03666 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
-@@ -570,7 +570,7 @@ static inline int is_vmalloc_or_module_addr(const void *x)
+@@ -599,7 +599,7 @@ static inline int is_vmalloc_or_module_addr(const void *x)
}
#endif
@@ -956,7 +924,7 @@ index 68a5121694ef..4f6c2e842744 100644
{
return kvmalloc_node(size, flags, NUMA_NO_NODE);
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
-index 296bbe49d5d1..b26652c9a98d 100644
+index 70b7123f38c7..09f3019489b2 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -129,7 +129,7 @@ extern int __init pcpu_page_first_chunk(size_t reserved_size,
@@ -980,10 +948,10 @@ index 296bbe49d5d1..b26652c9a98d 100644
extern phys_addr_t per_cpu_ptr_to_phys(void *addr);
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
-index 87f6db437e4a..bbcd76ec7d6e 100644
+index 1f678f023850..54a9effb6831 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
-@@ -1179,6 +1179,11 @@ extern int perf_cpu_time_max_percent_handler(struct ctl_table *table, int write,
+@@ -1205,6 +1205,11 @@ extern int perf_cpu_time_max_percent_handler(struct ctl_table *table, int write,
int perf_event_max_stack_handler(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos);
@@ -996,10 +964,10 @@ index 87f6db437e4a..bbcd76ec7d6e 100644
{
return sysctl_perf_event_paranoid > -1;
diff --git a/include/linux/slab.h b/include/linux/slab.h
-index 14e3fe4bd6a1..2b1d16e90e75 100644
+index 9449b19c5f10..f7beb5b69b60 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
-@@ -178,8 +178,8 @@ void memcg_destroy_kmem_caches(struct mem_cgroup *);
+@@ -180,8 +180,8 @@ void memcg_destroy_kmem_caches(struct mem_cgroup *);
/*
* Common kmalloc functions provided by all allocators
*/
@@ -1010,7 +978,7 @@ index 14e3fe4bd6a1..2b1d16e90e75 100644
void kfree(const void *);
void kzfree(const void *);
size_t ksize(const void *);
-@@ -352,7 +352,7 @@ static __always_inline unsigned int kmalloc_index(size_t size)
+@@ -385,7 +385,7 @@ static __always_inline unsigned int kmalloc_index(size_t size)
}
#endif /* !CONFIG_SLOB */
@@ -1019,7 +987,7 @@ index 14e3fe4bd6a1..2b1d16e90e75 100644
void *kmem_cache_alloc(struct kmem_cache *, gfp_t flags) __assume_slab_alignment __malloc;
void kmem_cache_free(struct kmem_cache *, void *);
-@@ -376,7 +376,7 @@ static __always_inline void kfree_bulk(size_t size, void **p)
+@@ -409,7 +409,7 @@ static __always_inline void kfree_bulk(size_t size, void **p)
}
#ifdef CONFIG_NUMA
@@ -1028,16 +996,16 @@ index 14e3fe4bd6a1..2b1d16e90e75 100644
void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node) __assume_slab_alignment __malloc;
#else
static __always_inline void *__kmalloc_node(size_t size, gfp_t flags, int node)
-@@ -498,7 +498,7 @@ static __always_inline void *kmalloc_large(size_t size, gfp_t flags)
- * for general use, and so are not documented here. For a full list of
- * potential flags, always refer to linux/gfp.h.
+@@ -530,7 +530,7 @@ static __always_inline void *kmalloc_large(size_t size, gfp_t flags)
+ * Try really hard to succeed the allocation but fail
+ * eventually.
*/
-static __always_inline void *kmalloc(size_t size, gfp_t flags)
+static __always_inline __attribute__((alloc_size(1))) void *kmalloc(size_t size, gfp_t flags)
{
if (__builtin_constant_p(size)) {
- if (size > KMALLOC_MAX_CACHE_SIZE)
-@@ -538,7 +538,7 @@ static __always_inline unsigned int kmalloc_size(unsigned int n)
+ #ifndef CONFIG_SLOB
+@@ -572,7 +572,7 @@ static __always_inline unsigned int kmalloc_size(unsigned int n)
return 0;
}
@@ -1047,7 +1015,7 @@ index 14e3fe4bd6a1..2b1d16e90e75 100644
#ifndef CONFIG_SLOB
if (__builtin_constant_p(size) &&
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
-index 3a1a1dbc6f49..ff38fec9eb76 100644
+index d2153789bd9f..97da977d6060 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -121,6 +121,11 @@ struct kmem_cache {
@@ -1063,10 +1031,10 @@ index 3a1a1dbc6f49..ff38fec9eb76 100644
/*
* Defragmentation by allocating from a remote node.
diff --git a/include/linux/string.h b/include/linux/string.h
-index 4a5a0eb7df51..be86cf21d0ce 100644
+index 6ab0a6fa512e..d3c5b10a4102 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
-@@ -235,10 +235,16 @@ void __read_overflow2(void) __compiletime_error("detected read beyond size of ob
+@@ -245,10 +245,16 @@ void __read_overflow2(void) __compiletime_error("detected read beyond size of ob
void __read_overflow3(void) __compiletime_error("detected read beyond size of object passed as 3rd parameter");
void __write_overflow(void) __compiletime_error("detected write beyond size of object passed as 1st parameter");
@@ -1084,7 +1052,7 @@ index 4a5a0eb7df51..be86cf21d0ce 100644
if (__builtin_constant_p(size) && p_size < size)
__write_overflow();
if (p_size < size)
-@@ -248,7 +254,7 @@ __FORTIFY_INLINE char *strncpy(char *p, const char *q, __kernel_size_t size)
+@@ -258,7 +264,7 @@ __FORTIFY_INLINE char *strncpy(char *p, const char *q, __kernel_size_t size)
__FORTIFY_INLINE char *strcat(char *p, const char *q)
{
@@ -1093,7 +1061,7 @@ index 4a5a0eb7df51..be86cf21d0ce 100644
if (p_size == (size_t)-1)
return __builtin_strcat(p, q);
if (strlcat(p, q, p_size) >= p_size)
-@@ -259,7 +265,7 @@ __FORTIFY_INLINE char *strcat(char *p, const char *q)
+@@ -269,7 +275,7 @@ __FORTIFY_INLINE char *strcat(char *p, const char *q)
__FORTIFY_INLINE __kernel_size_t strlen(const char *p)
{
__kernel_size_t ret;
@@ -1102,7 +1070,7 @@ index 4a5a0eb7df51..be86cf21d0ce 100644
/* Work around gcc excess stack consumption issue */
if (p_size == (size_t)-1 ||
-@@ -274,7 +280,7 @@ __FORTIFY_INLINE __kernel_size_t strlen(const char *p)
+@@ -284,7 +290,7 @@ __FORTIFY_INLINE __kernel_size_t strlen(const char *p)
extern __kernel_size_t __real_strnlen(const char *, __kernel_size_t) __RENAME(strnlen);
__FORTIFY_INLINE __kernel_size_t strnlen(const char *p, __kernel_size_t maxlen)
{
@@ -1111,7 +1079,7 @@ index 4a5a0eb7df51..be86cf21d0ce 100644
__kernel_size_t ret = __real_strnlen(p, maxlen < p_size ? maxlen : p_size);
if (p_size <= ret && maxlen != ret)
fortify_panic(__func__);
-@@ -286,8 +292,8 @@ extern size_t __real_strlcpy(char *, const char *, size_t) __RENAME(strlcpy);
+@@ -296,8 +302,8 @@ extern size_t __real_strlcpy(char *, const char *, size_t) __RENAME(strlcpy);
__FORTIFY_INLINE size_t strlcpy(char *p, const char *q, size_t size)
{
size_t ret;
@@ -1122,7 +1090,7 @@ index 4a5a0eb7df51..be86cf21d0ce 100644
if (p_size == (size_t)-1 && q_size == (size_t)-1)
return __real_strlcpy(p, q, size);
ret = strlen(q);
-@@ -307,8 +313,8 @@ __FORTIFY_INLINE size_t strlcpy(char *p, const char *q, size_t size)
+@@ -317,8 +323,8 @@ __FORTIFY_INLINE size_t strlcpy(char *p, const char *q, size_t size)
__FORTIFY_INLINE char *strncat(char *p, const char *q, __kernel_size_t count)
{
size_t p_len, copy_len;
@@ -1133,7 +1101,7 @@ index 4a5a0eb7df51..be86cf21d0ce 100644
if (p_size == (size_t)-1 && q_size == (size_t)-1)
return __builtin_strncat(p, q, count);
p_len = strlen(p);
-@@ -421,8 +427,8 @@ __FORTIFY_INLINE void *kmemdup(const void *p, size_t size, gfp_t gfp)
+@@ -431,8 +437,8 @@ __FORTIFY_INLINE void *kmemdup(const void *p, size_t size, gfp_t gfp)
/* defined after fortified strlen and memcpy to reuse them */
__FORTIFY_INLINE char *strcpy(char *p, const char *q)
{
@@ -1145,7 +1113,7 @@ index 4a5a0eb7df51..be86cf21d0ce 100644
return __builtin_strcpy(p, q);
memcpy(p, q, strlen(q) + 1);
diff --git a/include/linux/tty.h b/include/linux/tty.h
-index c56e3978b00f..1625c85f31f0 100644
+index bfa4e2ee94a9..3e18d583fc8d 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -14,6 +14,7 @@
@@ -1208,10 +1176,10 @@ index 398e9c95cd61..baab7195306a 100644
extern void *__vmalloc_node_flags(unsigned long size, int node, gfp_t flags);
static inline void *__vmalloc_node_flags_caller(unsigned long size, int node,
diff --git a/init/Kconfig b/init/Kconfig
-index 041f3a022122..0ddcf8b083d4 100644
+index 4592bf7997c0..2a5dfc8ed04f 100644
--- a/init/Kconfig
+++ b/init/Kconfig
-@@ -294,6 +294,7 @@ config USELIB
+@@ -342,6 +342,7 @@ config USELIB
config AUDIT
bool "Auditing support"
depends on NET
@@ -1219,7 +1187,7 @@ index 041f3a022122..0ddcf8b083d4 100644
help
Enable auditing infrastructure that can be used with another
kernel subsystem, such as SELinux (which requires this for
-@@ -1036,6 +1037,12 @@ config CC_OPTIMIZE_FOR_SIZE
+@@ -1139,6 +1140,12 @@ config CC_OPTIMIZE_FOR_SIZE
endchoice
@@ -1232,7 +1200,7 @@ index 041f3a022122..0ddcf8b083d4 100644
config HAVE_LD_DEAD_CODE_DATA_ELIMINATION
bool
help
-@@ -1319,8 +1326,7 @@ config SHMEM
+@@ -1425,8 +1432,7 @@ config SHMEM
which may be appropriate on small systems without swap.
config AIO
@@ -1242,7 +1210,7 @@ index 041f3a022122..0ddcf8b083d4 100644
help
This option enables POSIX asynchronous I/O which may by used
by some high performance threaded applications. Disabling
-@@ -1549,7 +1555,7 @@ config VM_EVENT_COUNTERS
+@@ -1652,7 +1658,7 @@ config VM_EVENT_COUNTERS
config SLUB_DEBUG
default y
@@ -1251,7 +1219,7 @@ index 041f3a022122..0ddcf8b083d4 100644
depends on SLUB && SYSFS
help
SLUB has extensive debug support features. Disabling these can
-@@ -1573,7 +1579,6 @@ config SLUB_MEMCG_SYSFS_ON
+@@ -1676,7 +1682,6 @@ config SLUB_MEMCG_SYSFS_ON
config COMPAT_BRK
bool "Disable heap randomization"
@@ -1259,7 +1227,7 @@ index 041f3a022122..0ddcf8b083d4 100644
help
Randomizing heap placement makes heap exploits harder, but it
also breaks ancient binaries (including anything libc5 based).
-@@ -1620,7 +1625,6 @@ endchoice
+@@ -1723,7 +1728,6 @@ endchoice
config SLAB_MERGE_DEFAULT
bool "Allow slab caches to be merged"
@@ -1267,7 +1235,7 @@ index 041f3a022122..0ddcf8b083d4 100644
help
For reduced kernel memory fragmentation, slab caches can be
merged when they share the same size and other characteristics.
-@@ -1633,9 +1637,9 @@ config SLAB_MERGE_DEFAULT
+@@ -1736,9 +1740,9 @@ config SLAB_MERGE_DEFAULT
command line.
config SLAB_FREELIST_RANDOM
@@ -1278,7 +1246,7 @@ index 041f3a022122..0ddcf8b083d4 100644
help
Randomizes the freelist order used on creating new pages. This
security feature reduces the predictability of the kernel slab
-@@ -1644,12 +1648,56 @@ config SLAB_FREELIST_RANDOM
+@@ -1747,12 +1751,56 @@ config SLAB_FREELIST_RANDOM
config SLAB_FREELIST_HARDENED
bool "Harden slab freelist metadata"
depends on SLUB
@@ -1336,10 +1304,10 @@ index 041f3a022122..0ddcf8b083d4 100644
default y
depends on SLUB && SMP
diff --git a/kernel/audit.c b/kernel/audit.c
-index e7478cb58079..69be132956df 100644
+index c89ea48c70a6..eeac2e76739d 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
-@@ -1631,6 +1631,9 @@ static int __init audit_enable(char *str)
+@@ -1641,6 +1641,9 @@ static int __init audit_enable(char *str)
if (audit_default == AUDIT_OFF)
audit_initialized = AUDIT_DISABLED;
@@ -1350,23 +1318,23 @@ index e7478cb58079..69be132956df 100644
pr_err("audit: error setting audit state (%d)\n",
audit_default);
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
-index 1e5625d46414..71cac92b6629 100644
+index 06ba9c5f156b..135eaaeff0b5 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
-@@ -367,7 +367,7 @@ void bpf_prog_kallsyms_del_all(struct bpf_prog *fp)
+@@ -521,7 +521,7 @@ void bpf_prog_kallsyms_del_all(struct bpf_prog *fp)
#ifdef CONFIG_BPF_JIT
/* All BPF JIT sysctl knobs here. */
int bpf_jit_enable __read_mostly = IS_BUILTIN(CONFIG_BPF_JIT_ALWAYS_ON);
-int bpf_jit_harden __read_mostly;
+int bpf_jit_harden __read_mostly = 2;
int bpf_jit_kallsyms __read_mostly;
+ long bpf_jit_limit __read_mostly;
- static __always_inline void
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
-index a31a1ba0f8ea..1d5093b51c63 100644
+index db6e825e2958..9b8d4b5368b1 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
-@@ -48,7 +48,7 @@ static DEFINE_SPINLOCK(prog_idr_lock);
+@@ -47,7 +47,7 @@ static DEFINE_SPINLOCK(prog_idr_lock);
static DEFINE_IDR(map_idr);
static DEFINE_SPINLOCK(map_idr_lock);
@@ -1376,10 +1344,10 @@ index a31a1ba0f8ea..1d5093b51c63 100644
static const struct bpf_map_ops * const bpf_map_types[] = {
#define BPF_PROG_TYPE(_id, _ops)
diff --git a/kernel/capability.c b/kernel/capability.c
-index 1e1c0236f55b..452062fe45ce 100644
+index 1444f3954d75..8cc9dd7992f2 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
-@@ -431,6 +431,12 @@ bool capable(int cap)
+@@ -449,6 +449,12 @@ bool capable(int cap)
return ns_capable(&init_user_ns, cap);
}
EXPORT_SYMBOL(capable);
@@ -1393,10 +1361,10 @@ index 1e1c0236f55b..452062fe45ce 100644
/**
diff --git a/kernel/events/core.c b/kernel/events/core.c
-index eec2d5fb676b..9040756bbb0a 100644
+index dc7dead2d2cc..e078b1fec819 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
-@@ -397,8 +397,13 @@ static cpumask_var_t perf_online_mask;
+@@ -398,8 +398,13 @@ static cpumask_var_t perf_online_mask;
* 0 - disallow raw tracepoint access for unpriv
* 1 - disallow cpu events for unpriv
* 2 - disallow kernel profiling for unpriv
@@ -1410,7 +1378,7 @@ index eec2d5fb676b..9040756bbb0a 100644
/* Minimum for 512 kiB + 1 user control page */
int sysctl_perf_event_mlock __read_mostly = 512 + (PAGE_SIZE / 1024); /* 'free' kiB per user */
-@@ -10408,6 +10413,9 @@ SYSCALL_DEFINE5(perf_event_open,
+@@ -10748,6 +10753,9 @@ SYSCALL_DEFINE5(perf_event_open,
if (flags & ~PERF_FLAG_ALL)
return -EINVAL;
@@ -1421,7 +1389,7 @@ index eec2d5fb676b..9040756bbb0a 100644
if (err)
return err;
diff --git a/kernel/fork.c b/kernel/fork.c
-index 1b27babc4c78..a88dd3ccd31c 100644
+index 2628f3773ca8..a2da35b446a6 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -103,6 +103,11 @@
@@ -1436,7 +1404,7 @@ index 1b27babc4c78..a88dd3ccd31c 100644
/*
* Minimum number of threads to boot the kernel
-@@ -1624,6 +1629,10 @@ static __latent_entropy struct task_struct *copy_process(
+@@ -1719,6 +1724,10 @@ static __latent_entropy struct task_struct *copy_process(
if ((clone_flags & (CLONE_NEWUSER|CLONE_FS)) == (CLONE_NEWUSER|CLONE_FS))
return ERR_PTR(-EINVAL);
@@ -1447,7 +1415,7 @@ index 1b27babc4c78..a88dd3ccd31c 100644
/*
* Thread groups must share signals as well, and detached threads
* can only be started up within the thread group.
-@@ -2420,6 +2429,12 @@ int ksys_unshare(unsigned long unshare_flags)
+@@ -2554,6 +2563,12 @@ int ksys_unshare(unsigned long unshare_flags)
if (unshare_flags & CLONE_NEWNS)
unshare_flags |= CLONE_FS;
@@ -1461,10 +1429,10 @@ index 1b27babc4c78..a88dd3ccd31c 100644
if (err)
goto bad_unshare_out;
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
-index 3d37c279c090..0789ca413f09 100644
+index f08a1e4ee1d4..ece99ca24ed0 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
-@@ -1138,7 +1138,7 @@ void free_basic_memory_bitmaps(void)
+@@ -1142,7 +1142,7 @@ void free_basic_memory_bitmaps(void)
void clear_free_pages(void)
{
@@ -1473,7 +1441,7 @@ index 3d37c279c090..0789ca413f09 100644
struct memory_bitmap *bm = free_pages_map;
unsigned long pfn;
-@@ -1155,7 +1155,7 @@ void clear_free_pages(void)
+@@ -1159,7 +1159,7 @@ void clear_free_pages(void)
}
memory_bm_position_reset(bm);
pr_info("free pages cleared after restore\n");
@@ -1483,36 +1451,36 @@ index 3d37c279c090..0789ca413f09 100644
/**
diff --git a/kernel/rcu/tiny.c b/kernel/rcu/tiny.c
-index a64eee0db39e..4d7de378fe4c 100644
+index 911bd9076d43..b65e2ee716c4 100644
--- a/kernel/rcu/tiny.c
+++ b/kernel/rcu/tiny.c
-@@ -164,7 +164,7 @@ static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp)
- }
+@@ -74,7 +74,7 @@ void rcu_sched_clock_irq(int user)
}
+ /* Invoke the RCU callbacks whose grace period has elapsed. */
-static __latent_entropy void rcu_process_callbacks(struct softirq_action *unused)
+static __latent_entropy void rcu_process_callbacks(void)
{
- __rcu_process_callbacks(&rcu_sched_ctrlblk);
- __rcu_process_callbacks(&rcu_bh_ctrlblk);
+ struct rcu_head *next, *list;
+ unsigned long flags;
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
-index aa7cade1b9f3..d6be47e1c86f 100644
+index acd6ccf56faf..17db4829d2c0 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
-@@ -2791,7 +2791,7 @@ __rcu_process_callbacks(struct rcu_state *rsp)
- /*
- * Do RCU core processing for the current CPU.
- */
--static __latent_entropy void rcu_process_callbacks(struct softirq_action *unused)
-+static __latent_entropy void rcu_process_callbacks(void)
- {
- struct rcu_state *rsp;
+@@ -2731,7 +2731,7 @@ void rcu_fwd_progress_check(unsigned long j)
+ EXPORT_SYMBOL_GPL(rcu_fwd_progress_check);
+ /* Perform RCU core processing work for the current CPU. */
+-static __latent_entropy void rcu_core(struct softirq_action *unused)
++static __latent_entropy void rcu_core(void)
+ {
+ unsigned long flags;
+ struct rcu_data *rdp = raw_cpu_ptr(&rcu_data);
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
-index 9c219f7b0970..963a68e64593 100644
+index 232491e3ed0d..194d10702841 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
-@@ -9862,7 +9862,7 @@ static int idle_balance(struct rq *this_rq, struct rq_flags *rf)
+@@ -10117,7 +10117,7 @@ static int idle_balance(struct rq *this_rq, struct rq_flags *rf)
* run_rebalance_domains is triggered when needed from the scheduler tick.
* Also triggered for nohz idle balancing (with nohz_balancing_kick set).
*/
@@ -1522,7 +1490,7 @@ index 9c219f7b0970..963a68e64593 100644
struct rq *this_rq = this_rq();
enum cpu_idle_type idle = this_rq->idle_balance ?
diff --git a/kernel/softirq.c b/kernel/softirq.c
-index 6f584861d329..1943fe60f3b9 100644
+index 10277429ed84..d1323bdfc20c 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -53,7 +53,7 @@ DEFINE_PER_CPU_ALIGNED(irq_cpustat_t, irq_stat);
@@ -1534,7 +1502,7 @@ index 6f584861d329..1943fe60f3b9 100644
DEFINE_PER_CPU(struct task_struct *, ksoftirqd);
-@@ -289,7 +289,7 @@ asmlinkage __visible void __softirq_entry __do_softirq(void)
+@@ -290,7 +290,7 @@ asmlinkage __visible void __softirq_entry __do_softirq(void)
kstat_incr_softirqs_this_cpu(vec_nr);
trace_softirq_entry(vec_nr);
@@ -1543,7 +1511,7 @@ index 6f584861d329..1943fe60f3b9 100644
trace_softirq_exit(vec_nr);
if (unlikely(prev_count != preempt_count())) {
pr_err("huh, entered softirq %u %s %p with preempt_count %08x, exited with %08x?\n",
-@@ -451,7 +451,7 @@ void __raise_softirq_irqoff(unsigned int nr)
+@@ -453,7 +453,7 @@ void __raise_softirq_irqoff(unsigned int nr)
or_softirq_pending(1UL << nr);
}
@@ -1552,7 +1520,7 @@ index 6f584861d329..1943fe60f3b9 100644
{
softirq_vec[nr].action = action;
}
-@@ -497,8 +497,7 @@ void __tasklet_hi_schedule(struct tasklet_struct *t)
+@@ -499,8 +499,7 @@ void __tasklet_hi_schedule(struct tasklet_struct *t)
}
EXPORT_SYMBOL(__tasklet_hi_schedule);
@@ -1562,7 +1530,7 @@ index 6f584861d329..1943fe60f3b9 100644
unsigned int softirq_nr)
{
struct tasklet_struct *list;
-@@ -535,14 +534,14 @@ static void tasklet_action_common(struct softirq_action *a,
+@@ -537,14 +536,14 @@ static void tasklet_action_common(struct softirq_action *a,
}
}
@@ -1582,18 +1550,18 @@ index 6f584861d329..1943fe60f3b9 100644
void tasklet_init(struct tasklet_struct *t,
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
-index 2d9837c0aff4..852fea68d574 100644
+index 387efbaf464a..238a6d0c25dc 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
-@@ -67,6 +67,7 @@
+@@ -66,6 +66,7 @@
+ #include <linux/kexec.h>
#include <linux/bpf.h>
#include <linux/mount.h>
- #include <linux/pipe_fs_i.h>
+#include <linux/tty.h>
- #include <linux/uaccess.h>
- #include <asm/processor.h>
-@@ -99,12 +100,19 @@
+ #include "../lib/kstrtox.h"
+
+@@ -102,12 +103,19 @@
#if defined(CONFIG_SYSCTL)
/* External variables not in a header file. */
@@ -1613,7 +1581,7 @@ index 2d9837c0aff4..852fea68d574 100644
extern int pid_max;
extern int pid_max_min, pid_max_max;
extern int percpu_pagelist_fraction;
-@@ -116,40 +124,43 @@ extern int sysctl_nr_trim_pages;
+@@ -119,35 +127,35 @@ extern int sysctl_nr_trim_pages;
/* Constants used for minimum and maximum */
#ifdef CONFIG_LOCKUP_DETECTOR
@@ -1624,17 +1592,22 @@ index 2d9837c0aff4..852fea68d574 100644
-static int __maybe_unused neg_one = -1;
+static int __maybe_unused neg_one __read_only = -1;
- static int zero;
+-static int zero;
-static int __maybe_unused one = 1;
-static int __maybe_unused two = 2;
-static int __maybe_unused four = 4;
+-static unsigned long zero_ul;
-static unsigned long one_ul = 1;
+-static unsigned long long_max = LONG_MAX;
-static int one_hundred = 100;
-static int one_thousand = 1000;
++static int zero __read_only;
+static int __maybe_unused one __read_only = 1;
+static int __maybe_unused two __read_only = 2;
+static int __maybe_unused four __read_only = 4;
++static unsigned long zero_ul __read_only;
+static unsigned long one_ul __read_only = 1;
++static unsigned long long_max __read_only = LONG_MAX;
+static int one_hundred __read_only = 100;
+static int one_thousand __read_only = 1000;
#ifdef CONFIG_PRINTK
@@ -1660,7 +1633,10 @@ index 2d9837c0aff4..852fea68d574 100644
+static int ngroups_max __read_only = NGROUPS_MAX;
static const int cap_last_cap = CAP_LAST_CAP;
- /*this is needed for proc_doulongvec_minmax of sysctl_hung_task_timeout_secs */
+ /*
+@@ -155,9 +163,12 @@ static const int cap_last_cap = CAP_LAST_CAP;
+ * and hung_task_check_interval_secs
+ */
#ifdef CONFIG_DETECT_HUNG_TASK
-static unsigned long hung_task_timeout_max = (LONG_MAX/HZ);
+static unsigned long hung_task_timeout_max __read_only = (LONG_MAX/HZ);
@@ -1672,7 +1648,7 @@ index 2d9837c0aff4..852fea68d574 100644
#ifdef CONFIG_INOTIFY_USER
#include <linux/inotify.h>
#endif
-@@ -293,19 +304,19 @@ static struct ctl_table sysctl_base_table[] = {
+@@ -306,19 +317,19 @@ static struct ctl_table sysctl_base_table[] = {
};
#ifdef CONFIG_SCHED_DEBUG
@@ -1700,7 +1676,7 @@ index 2d9837c0aff4..852fea68d574 100644
#endif
static struct ctl_table kern_table[] = {
-@@ -519,6 +530,15 @@ static struct ctl_table kern_table[] = {
+@@ -535,6 +546,15 @@ static struct ctl_table kern_table[] = {
.proc_handler = proc_dointvec,
},
#endif
@@ -1716,13 +1692,13 @@ index 2d9837c0aff4..852fea68d574 100644
#ifdef CONFIG_PROC_SYSCTL
{
.procname = "tainted",
-@@ -867,6 +887,37 @@ static struct ctl_table kern_table[] = {
+@@ -890,6 +910,37 @@ static struct ctl_table kern_table[] = {
.extra1 = &zero,
.extra2 = &two,
},
+#endif
+#if defined CONFIG_TTY
-+ {
++ {
+ .procname = "tiocsti_restrict",
+ .data = &tiocsti_restrict,
+ .maxlen = sizeof(int),
@@ -1730,7 +1706,7 @@ index 2d9837c0aff4..852fea68d574 100644
+ .proc_handler = proc_dointvec_minmax_sysadmin,
+ .extra1 = &zero,
+ .extra2 = &one,
-+ },
++ },
+#endif
+ {
+ .procname = "device_sidechannel_restrict",
@@ -1755,10 +1731,10 @@ index 2d9837c0aff4..852fea68d574 100644
{
.procname = "ngroups_max",
diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c
-index 3e93c54bd3a1..0fed811ed850 100644
+index 41dfff23c1f9..298a1554c3e4 100644
--- a/kernel/time/hrtimer.c
+++ b/kernel/time/hrtimer.c
-@@ -1462,7 +1462,7 @@ static void __hrtimer_run_queues(struct hrtimer_cpu_base *cpu_base, ktime_t now,
+@@ -1453,7 +1453,7 @@ static void __hrtimer_run_queues(struct hrtimer_cpu_base *cpu_base, ktime_t now,
}
}
@@ -1768,10 +1744,10 @@ index 3e93c54bd3a1..0fed811ed850 100644
struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases);
unsigned long flags;
diff --git a/kernel/time/timer.c b/kernel/time/timer.c
-index cc2d23e6ff61..438be7646454 100644
+index 2fce056f8a49..acac240068c1 100644
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
-@@ -1672,7 +1672,7 @@ static inline void __run_timers(struct timer_base *base)
+@@ -1687,7 +1687,7 @@ static inline void __run_timers(struct timer_base *base)
/*
* This function runs timers and the timer-tq in bottom half context.
*/
@@ -1781,7 +1757,7 @@ index cc2d23e6ff61..438be7646454 100644
struct timer_base *base = this_cpu_ptr(&timer_bases[BASE_STD]);
diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
-index c3d7583fcd21..6ee37e516869 100644
+index 923414a246e9..6b9dbc257e34 100644
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -26,6 +26,9 @@
@@ -1795,10 +1771,20 @@ index c3d7583fcd21..6ee37e516869 100644
static DEFINE_MUTEX(userns_state_mutex);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
-index 8838d1158d19..a208770a0e9e 100644
+index d5a4a4036d2f..b16d39c4c407 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
-@@ -945,6 +945,7 @@ endmenu # "Debug lockups and hangs"
+@@ -350,6 +350,9 @@ config SECTION_MISMATCH_WARN_ONLY
+
+ If unsure, say Y.
+
++config DEBUG_WRITABLE_FUNCTION_POINTERS_VERBOSE
++ bool "Enable verbose reporting of writable function pointers"
++
+ #
+ # Select this config option from the architecture Kconfig, if it
+ # is preferred to always offer frame pointers as a config
+@@ -966,6 +969,7 @@ endmenu # "Debug lockups and hangs"
config PANIC_ON_OOPS
bool "Panic on Oops"
@@ -1806,7 +1792,7 @@ index 8838d1158d19..a208770a0e9e 100644
help
Say Y here to enable the kernel to panic when it oopses. This
has the same effect as setting oops=panic on the kernel command
-@@ -954,7 +955,7 @@ config PANIC_ON_OOPS
+@@ -975,7 +979,7 @@ config PANIC_ON_OOPS
anything erroneous after an oops which could result in data
corruption or other issues.
@@ -1815,7 +1801,7 @@ index 8838d1158d19..a208770a0e9e 100644
config PANIC_ON_OOPS_VALUE
int
-@@ -1323,6 +1324,7 @@ config DEBUG_BUGVERBOSE
+@@ -1344,6 +1348,7 @@ config DEBUG_BUGVERBOSE
config DEBUG_LIST
bool "Debug linked list manipulation"
depends on DEBUG_KERNEL || BUG_ON_DATA_CORRUPTION
@@ -1823,7 +1809,7 @@ index 8838d1158d19..a208770a0e9e 100644
help
Enable this to turn on extended checks in the linked-list
walking routines.
-@@ -1983,6 +1985,7 @@ config MEMTEST
+@@ -2026,6 +2031,7 @@ config MEMTEST
config BUG_ON_DATA_CORRUPTION
bool "Trigger a BUG when data corruption is detected"
select DEBUG_LIST
@@ -1831,7 +1817,7 @@ index 8838d1158d19..a208770a0e9e 100644
help
Select this option if the kernel should BUG when it encounters
data corruption in kernel memory structures when they get checked
-@@ -2022,6 +2025,7 @@ config STRICT_DEVMEM
+@@ -2065,6 +2071,7 @@ config STRICT_DEVMEM
config IO_STRICT_DEVMEM
bool "Filter I/O access to /dev/mem"
depends on STRICT_DEVMEM
@@ -1840,7 +1826,7 @@ index 8838d1158d19..a208770a0e9e 100644
If this option is disabled, you allow userspace (root) access to all
io-memory regardless of whether a driver is actively using that
diff --git a/lib/irq_poll.c b/lib/irq_poll.c
-index 86a709954f5a..6f15787fcb1b 100644
+index 2f17b488d58e..b6e7996a0058 100644
--- a/lib/irq_poll.c
+++ b/lib/irq_poll.c
@@ -75,7 +75,7 @@ void irq_poll_complete(struct irq_poll *iop)
@@ -1853,10 +1839,10 @@ index 86a709954f5a..6f15787fcb1b 100644
struct list_head *list = this_cpu_ptr(&blk_cpu_iopoll);
int rearm = 0, budget = irq_poll_budget;
diff --git a/lib/kobject.c b/lib/kobject.c
-index 18989b5b3b56..bd46da8243a6 100644
+index aa89edcd2b63..c505d13ba323 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
-@@ -952,9 +952,9 @@ EXPORT_SYMBOL_GPL(kset_create_and_add);
+@@ -978,9 +978,9 @@ EXPORT_SYMBOL_GPL(kset_create_and_add);
static DEFINE_SPINLOCK(kobj_ns_type_lock);
@@ -1869,10 +1855,10 @@ index 18989b5b3b56..bd46da8243a6 100644
enum kobj_ns_type type = ops->type;
int error;
diff --git a/lib/nlattr.c b/lib/nlattr.c
-index dfa55c873c13..c6b0436f473d 100644
+index d26de6156b97..ed11787fcfe7 100644
--- a/lib/nlattr.c
+++ b/lib/nlattr.c
-@@ -364,6 +364,8 @@ int nla_memcpy(void *dest, const struct nlattr *src, int count)
+@@ -539,6 +539,8 @@ int nla_memcpy(void *dest, const struct nlattr *src, int count)
{
int minlen = min_t(int, count, nla_len(src));
@@ -1882,11 +1868,11 @@ index dfa55c873c13..c6b0436f473d 100644
if (count > minlen)
memset(dest + minlen, 0, count - minlen);
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
-index a48aaa79d352..a57213b70cad 100644
+index 791b6fa36905..6d6a3ad3bf0f 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
-@@ -1371,7 +1371,7 @@ char *pointer_string(char *buf, char *end, const void *ptr,
- return number(buf, end, (unsigned long int)ptr, spec);
+@@ -1476,7 +1476,7 @@ char *uuid_string(char *buf, char *end, const u8 *addr,
+ return string(buf, end, uuid, spec);
}
-int kptr_restrict __read_mostly;
@@ -1895,10 +1881,10 @@ index a48aaa79d352..a57213b70cad 100644
static noinline_for_stack
char *restricted_pointer(char *buf, char *end, const void *ptr,
diff --git a/mm/Kconfig b/mm/Kconfig
-index ce95491abd6a..19b62893da3d 100644
+index 2e6d24d783f7..c378add17049 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
-@@ -312,7 +312,8 @@ config KSM
+@@ -306,7 +306,8 @@ config KSM
config DEFAULT_MMAP_MIN_ADDR
int "Low address space to protect from user allocation"
depends on MMU
@@ -1909,10 +1895,10 @@ index ce95491abd6a..19b62893da3d 100644
This is the portion of low virtual memory which should be protected
from userspace allocation. Keeping a user from writing to low pages
diff --git a/mm/mmap.c b/mm/mmap.c
-index 17bbf4d3e24f..40ac799db35b 100644
+index 2d6a6662edb9..e154e7fc1d8a 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
-@@ -229,6 +229,13 @@ SYSCALL_DEFINE1(brk, unsigned long, brk)
+@@ -233,6 +233,13 @@ SYSCALL_DEFINE1(brk, unsigned long, brk)
newbrk = PAGE_ALIGN(brk);
oldbrk = PAGE_ALIGN(mm->brk);
@@ -1923,24 +1909,24 @@ index 17bbf4d3e24f..40ac799db35b 100644
+ if (mm->brk == min_brk)
+ oldbrk -= PAGE_SIZE;
+ }
- if (oldbrk == newbrk)
- goto set_brk;
-
+ if (oldbrk == newbrk) {
+ mm->brk = brk;
+ goto success;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
-index 3222193c46c6..b8e36bed196d 100644
+index 475ca5b1a824..87371ac3ad1e 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -67,6 +67,7 @@
- #include <linux/ftrace.h>
#include <linux/lockdep.h>
#include <linux/nmi.h>
+ #include <linux/psi.h>
+#include <linux/random.h>
#include <asm/sections.h>
#include <asm/tlbflush.h>
-@@ -100,6 +101,15 @@ int _node_numa_mem_[MAX_NUMNODES];
+@@ -104,6 +105,15 @@ struct pcpu_drain {
DEFINE_MUTEX(pcpu_drain_mutex);
- DEFINE_PER_CPU(struct work_struct, pcpu_drain);
+ DEFINE_PER_CPU(struct pcpu_drain, pcpu_drain);
+bool __meminitdata extra_latent_entropy;
+
@@ -1954,7 +1940,7 @@ index 3222193c46c6..b8e36bed196d 100644
#ifdef CONFIG_GCC_PLUGIN_LATENT_ENTROPY
volatile unsigned long latent_entropy __latent_entropy;
EXPORT_SYMBOL(latent_entropy);
-@@ -1027,6 +1037,13 @@ static __always_inline bool free_pages_prepare(struct page *page,
+@@ -1142,6 +1152,13 @@ static __always_inline bool free_pages_prepare(struct page *page,
debug_check_no_obj_freed(page_address(page),
PAGE_SIZE << order);
}
@@ -1968,10 +1954,13 @@ index 3222193c46c6..b8e36bed196d 100644
arch_free_page(page, order);
kernel_poison_pages(page, 1 << order, 0);
kernel_map_pages(page, 1 << order, 0);
-@@ -1267,6 +1284,21 @@ static void __init __free_pages_boot_core(struct page *page, unsigned int order)
- __ClearPageReserved(p);
- set_page_count(p, 0);
+@@ -1373,6 +1390,25 @@ static void __free_pages_ok(struct page *page, unsigned int order)
+ local_irq_restore(flags);
+ }
++static void __init __gather_extra_latent_entropy(struct page *page,
++ unsigned int nr_pages)
++{
+ if (extra_latent_entropy && !PageHighMem(page) && page_to_pfn(page) < 0x100000) {
+ unsigned long hash = 0;
+ size_t index, end = PAGE_SIZE * nr_pages / sizeof hash;
@@ -1986,11 +1975,44 @@ index 3222193c46c6..b8e36bed196d 100644
+ add_device_randomness((const void *)&hash, sizeof(hash));
+#endif
+ }
++}
+
- page_zone(page)->managed_pages += nr_pages;
+ void __free_pages_core(struct page *page, unsigned int order)
+ {
+ unsigned int nr_pages = 1 << order;
+@@ -1387,7 +1423,6 @@ void __free_pages_core(struct page *page, unsigned int order)
+ }
+ __ClearPageReserved(p);
+ set_page_count(p, 0);
+-
+ atomic_long_add(nr_pages, &page_zone(page)->managed_pages);
set_page_refcounted(page);
__free_pages(page, order);
-@@ -1855,8 +1887,8 @@ static inline int check_new_page(struct page *page)
+@@ -1452,6 +1487,7 @@ void __init memblock_free_pages(struct page *page, unsigned long pfn,
+ {
+ if (early_page_uninitialised(pfn))
+ return;
++ __gather_extra_latent_entropy(page, 1 << order);
+ __free_pages_core(page, order);
+ }
+
+@@ -1542,6 +1578,7 @@ static void __init deferred_free_range(unsigned long pfn,
+ if (nr_pages == pageblock_nr_pages &&
+ (pfn & (pageblock_nr_pages - 1)) == 0) {
+ set_pageblock_migratetype(page, MIGRATE_MOVABLE);
++ __gather_extra_latent_entropy(page, 1 << pageblock_order);
+ __free_pages_core(page, pageblock_order);
+ return;
+ }
+@@ -1549,6 +1586,7 @@ static void __init deferred_free_range(unsigned long pfn,
+ for (i = 0; i < nr_pages; i++, page++, pfn++) {
+ if ((pfn & (pageblock_nr_pages - 1)) == 0)
+ set_pageblock_migratetype(page, MIGRATE_MOVABLE);
++ __gather_extra_latent_entropy(page, 1);
+ __free_pages_core(page, 0);
+ }
+ }
+@@ -1969,8 +2007,8 @@ static inline int check_new_page(struct page *page)
static inline bool free_pages_prezeroed(void)
{
@@ -2001,7 +2023,7 @@ index 3222193c46c6..b8e36bed196d 100644
}
#ifdef CONFIG_DEBUG_VM
-@@ -1913,6 +1945,11 @@ static void prep_new_page(struct page *page, unsigned int order, gfp_t gfp_flags
+@@ -2027,6 +2065,11 @@ static void prep_new_page(struct page *page, unsigned int order, gfp_t gfp_flags
post_alloc_hook(page, order, gfp_flags);
@@ -2014,10 +2036,10 @@ index 3222193c46c6..b8e36bed196d 100644
for (i = 0; i < (1 << order); i++)
clear_highpage(page + i);
diff --git a/mm/slab.h b/mm/slab.h
-index 68bdf498da3b..079ff5df3b16 100644
+index 43ac818b8592..0f4fc66322c4 100644
--- a/mm/slab.h
+++ b/mm/slab.h
-@@ -313,7 +313,11 @@ static inline bool is_root_cache(struct kmem_cache *s)
+@@ -310,7 +310,11 @@ static inline bool is_root_cache(struct kmem_cache *s)
static inline bool slab_equal_or_root(struct kmem_cache *s,
struct kmem_cache *p)
{
@@ -2029,7 +2051,7 @@ index 68bdf498da3b..079ff5df3b16 100644
}
static inline const char *cache_name(struct kmem_cache *s)
-@@ -365,18 +369,26 @@ static inline struct kmem_cache *cache_from_obj(struct kmem_cache *s, void *x)
+@@ -362,18 +366,26 @@ static inline struct kmem_cache *cache_from_obj(struct kmem_cache *s, void *x)
* to not do even the assignment. In that case, slab_equal_or_root
* will also be a constant.
*/
@@ -2057,7 +2079,7 @@ index 68bdf498da3b..079ff5df3b16 100644
return s;
}
-@@ -401,7 +413,7 @@ static inline size_t slab_ksize(const struct kmem_cache *s)
+@@ -398,7 +410,7 @@ static inline size_t slab_ksize(const struct kmem_cache *s)
* back there or track user information then we can
* only use the space before that information.
*/
@@ -2067,7 +2089,7 @@ index 68bdf498da3b..079ff5df3b16 100644
/*
* Else we can use all the padding etc for the allocation
diff --git a/mm/slab_common.c b/mm/slab_common.c
-index 2296caf87bfb..7abd5a11e12d 100644
+index 58251ba63e4a..fbaacef2acaf 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -27,10 +27,10 @@
@@ -2093,10 +2115,10 @@ index 2296caf87bfb..7abd5a11e12d 100644
static int __init setup_slab_nomerge(char *str)
{
diff --git a/mm/slub.c b/mm/slub.c
-index 51258eff4178..075266bfbccf 100644
+index d30ede89f4a6..37db8891a099 100644
--- a/mm/slub.c
+++ b/mm/slub.c
-@@ -125,6 +125,16 @@ static inline int kmem_cache_debug(struct kmem_cache *s)
+@@ -124,6 +124,16 @@ static inline int kmem_cache_debug(struct kmem_cache *s)
#endif
}
@@ -2113,7 +2135,7 @@ index 51258eff4178..075266bfbccf 100644
void *fixup_red_left(struct kmem_cache *s, void *p)
{
if (kmem_cache_debug(s) && s->flags & SLAB_RED_ZONE)
-@@ -299,6 +309,35 @@ static inline void set_freepointer(struct kmem_cache *s, void *object, void *fp)
+@@ -308,6 +318,35 @@ static inline void set_freepointer(struct kmem_cache *s, void *object, void *fp)
*(void **)freeptr_addr = freelist_ptr(s, fp, freeptr_addr);
}
@@ -2149,7 +2171,7 @@ index 51258eff4178..075266bfbccf 100644
/* Loop over all objects in a slab */
#define for_each_object(__p, __s, __addr, __objects) \
for (__p = fixup_red_left(__s, __addr); \
-@@ -471,13 +510,13 @@ static inline void *restore_red_left(struct kmem_cache *s, void *p)
+@@ -475,13 +514,13 @@ static inline void *restore_red_left(struct kmem_cache *s, void *p)
* Debug settings:
*/
#if defined(CONFIG_SLUB_DEBUG_ON)
@@ -2167,7 +2189,7 @@ index 51258eff4178..075266bfbccf 100644
/*
* slub is about to manipulate internal object metadata. This memory lies
-@@ -537,6 +576,9 @@ static struct track *get_track(struct kmem_cache *s, void *object,
+@@ -542,6 +581,9 @@ static struct track *get_track(struct kmem_cache *s, void *object,
else
p = object + s->inuse;
@@ -2177,7 +2199,7 @@ index 51258eff4178..075266bfbccf 100644
return p + alloc;
}
-@@ -676,6 +718,9 @@ static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p)
+@@ -681,6 +723,9 @@ static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p)
else
off = s->inuse;
@@ -2187,7 +2209,7 @@ index 51258eff4178..075266bfbccf 100644
if (s->flags & SLAB_STORE_USER)
off += 2 * sizeof(struct track);
-@@ -805,6 +850,9 @@ static int check_pad_bytes(struct kmem_cache *s, struct page *page, u8 *p)
+@@ -810,6 +855,9 @@ static int check_pad_bytes(struct kmem_cache *s, struct page *page, u8 *p)
/* Freepointer is placed after the object. */
off += sizeof(void *);
@@ -2197,18 +2219,18 @@ index 51258eff4178..075266bfbccf 100644
if (s->flags & SLAB_STORE_USER)
/* We also have user information there */
off += 2 * sizeof(struct track);
-@@ -1419,8 +1467,9 @@ static void setup_object(struct kmem_cache *s, struct page *page,
+@@ -1475,8 +1523,9 @@ static void *setup_object(struct kmem_cache *s, struct page *page,
void *object)
{
setup_object_debug(s, page, object);
+ set_canary(s, object, s->random_inactive);
- kasan_init_slab_obj(s, object);
+ object = kasan_init_slab_obj(s, object);
- if (unlikely(s->ctor)) {
+ if (unlikely(s->ctor) && !has_sanitize_verify(s)) {
kasan_unpoison_object_data(s, object);
s->ctor(object);
kasan_poison_object_data(s, object);
-@@ -2702,9 +2751,21 @@ static __always_inline void *slab_alloc_node(struct kmem_cache *s,
+@@ -2750,9 +2799,21 @@ static __always_inline void *slab_alloc_node(struct kmem_cache *s,
stat(s, ALLOC_FASTPATH);
}
@@ -2231,7 +2253,7 @@ index 51258eff4178..075266bfbccf 100644
slab_post_alloc_hook(s, gfpflags, 1, &object);
return object;
-@@ -2911,6 +2972,27 @@ static __always_inline void do_slab_free(struct kmem_cache *s,
+@@ -2959,6 +3020,27 @@ static __always_inline void do_slab_free(struct kmem_cache *s,
void *tail_obj = tail ? : head;
struct kmem_cache_cpu *c;
unsigned long tid;
@@ -2259,7 +2281,7 @@ index 51258eff4178..075266bfbccf 100644
redo:
/*
* Determine the currently cpus per cpu slab.
-@@ -3087,7 +3169,7 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
+@@ -3135,7 +3217,7 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
void **p)
{
struct kmem_cache_cpu *c;
@@ -2268,7 +2290,7 @@ index 51258eff4178..075266bfbccf 100644
/* memcg and kmem_cache debug support */
s = slab_pre_alloc_hook(s, flags);
-@@ -3124,13 +3206,29 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
+@@ -3172,13 +3254,29 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
local_irq_enable();
/* Clear memory outside IRQ disabled fastpath loop */
@@ -2299,7 +2321,7 @@ index 51258eff4178..075266bfbccf 100644
/* memcg and kmem_cache debug support */
slab_post_alloc_hook(s, flags, size, p);
return i;
-@@ -3162,9 +3260,9 @@ EXPORT_SYMBOL(kmem_cache_alloc_bulk);
+@@ -3210,9 +3308,9 @@ EXPORT_SYMBOL(kmem_cache_alloc_bulk);
* and increases the number of allocations possible without having to
* take the list_lock.
*/
@@ -2312,15 +2334,15 @@ index 51258eff4178..075266bfbccf 100644
/*
* Calculate the order of allocation given an slab object size.
-@@ -3336,6 +3434,7 @@ static void early_kmem_cache_node_alloc(int node)
+@@ -3380,6 +3478,7 @@ static void early_kmem_cache_node_alloc(int node)
init_object(kmem_cache_node, n, SLUB_RED_ACTIVE);
init_tracking(kmem_cache_node, n);
#endif
+ set_canary(kmem_cache_node, n, kmem_cache_node->random_active);
- kasan_kmalloc(kmem_cache_node, n, sizeof(struct kmem_cache_node),
+ n = kasan_kmalloc(kmem_cache_node, n, sizeof(struct kmem_cache_node),
GFP_KERNEL);
- init_kmem_cache_node(n);
-@@ -3492,6 +3591,9 @@ static int calculate_sizes(struct kmem_cache *s, int forced_order)
+ page->freelist = get_freepointer(kmem_cache_node, n);
+@@ -3540,6 +3639,9 @@ static int calculate_sizes(struct kmem_cache *s, int forced_order)
size += sizeof(void *);
}
@@ -2330,7 +2352,7 @@ index 51258eff4178..075266bfbccf 100644
#ifdef CONFIG_SLUB_DEBUG
if (flags & SLAB_STORE_USER)
/*
-@@ -3561,6 +3663,10 @@ static int kmem_cache_open(struct kmem_cache *s, slab_flags_t flags)
+@@ -3612,6 +3714,10 @@ static int kmem_cache_open(struct kmem_cache *s, slab_flags_t flags)
#ifdef CONFIG_SLAB_FREELIST_HARDENED
s->random = get_random_long();
#endif
@@ -2341,7 +2363,7 @@ index 51258eff4178..075266bfbccf 100644
if (!calculate_sizes(s, -1))
goto error;
-@@ -3837,6 +3943,8 @@ void __check_heap_object(const void *ptr, unsigned long n, struct page *page,
+@@ -3887,6 +3993,8 @@ void __check_heap_object(const void *ptr, unsigned long n, struct page *page,
offset -= s->red_left_pad;
}
@@ -2350,7 +2372,7 @@ index 51258eff4178..075266bfbccf 100644
/* Allow address range falling entirely within usercopy region. */
if (offset >= s->useroffset &&
offset - s->useroffset <= s->usersize &&
-@@ -3870,7 +3978,11 @@ static size_t __ksize(const void *object)
+@@ -3920,7 +4028,11 @@ static size_t __ksize(const void *object)
page = virt_to_head_page(object);
if (unlikely(!PageSlab(page))) {
@@ -2362,7 +2384,7 @@ index 51258eff4178..075266bfbccf 100644
return PAGE_SIZE << compound_order(page);
}
-@@ -4730,7 +4842,7 @@ enum slab_stat_type {
+@@ -4777,7 +4889,7 @@ enum slab_stat_type {
#define SO_TOTAL (1 << SL_TOTAL)
#ifdef CONFIG_MEMCG
@@ -2372,10 +2394,10 @@ index 51258eff4178..075266bfbccf 100644
static int __init setup_slub_memcg_sysfs(char *str)
{
diff --git a/mm/swap.c b/mm/swap.c
-index 26fc9b5f1b6c..7c9312ca8982 100644
+index 301ed4e04320..cff1e4d6d04f 100644
--- a/mm/swap.c
+++ b/mm/swap.c
-@@ -93,6 +93,13 @@ static void __put_compound_page(struct page *page)
+@@ -92,6 +92,13 @@ static void __put_compound_page(struct page *page)
if (!PageHuge(page))
__page_cache_release(page);
dtor = get_compound_page_dtor(page);
@@ -2390,10 +2412,10 @@ index 26fc9b5f1b6c..7c9312ca8982 100644
}
diff --git a/net/core/dev.c b/net/core/dev.c
-index 559a91271f82..1e3b8deea1a7 100644
+index c6b2f6db0a9b..89b55db262a0 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
-@@ -4259,7 +4259,7 @@ int netif_rx_ni(struct sk_buff *skb)
+@@ -4588,7 +4588,7 @@ int netif_rx_ni(struct sk_buff *skb)
}
EXPORT_SYMBOL(netif_rx_ni);
@@ -2402,7 +2424,7 @@ index 559a91271f82..1e3b8deea1a7 100644
{
struct softnet_data *sd = this_cpu_ptr(&softnet_data);
-@@ -5811,7 +5811,7 @@ static int napi_poll(struct napi_struct *n, struct list_head *repoll)
+@@ -6402,7 +6402,7 @@ static int napi_poll(struct napi_struct *n, struct list_head *repoll)
return work;
}
@@ -2412,7 +2434,7 @@ index 559a91271f82..1e3b8deea1a7 100644
struct softnet_data *sd = this_cpu_ptr(&softnet_data);
unsigned long time_limit = jiffies +
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
-index 80dad301361d..0c85c2a29ac1 100644
+index 32cae39cdff6..9141d7ae99b2 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -266,6 +266,7 @@ config IP_PIMSM_V2
@@ -2423,19 +2445,48 @@ index 80dad301361d..0c85c2a29ac1 100644
---help---
Normal TCP/IP networking is open to an attack known as "SYN
flooding". This denial-of-service attack prevents legitimate remote
+diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
+index 6b7f354f189a..360b015678a7 100644
+--- a/scripts/Makefile.modpost
++++ b/scripts/Makefile.modpost
+@@ -78,6 +78,7 @@ modpost = scripts/mod/modpost \
+ $(if $(KBUILD_EXTRA_SYMBOLS), $(patsubst %, -e %,$(KBUILD_EXTRA_SYMBOLS))) \
+ $(if $(KBUILD_EXTMOD),-o $(modulesymfile)) \
+ $(if $(CONFIG_SECTION_MISMATCH_WARN_ONLY),,-E) \
++ $(if $(CONFIG_DEBUG_WRITABLE_FUNCTION_POINTERS_VERBOSE),-f) \
+ $(if $(KBUILD_EXTMOD)$(KBUILD_MODPOST_WARN),-w)
+
+ MODPOST_OPT=$(subst -i,-n,$(filter -i,$(MAKEFLAGS)))
+diff --git a/scripts/gcc-plugins/Kconfig b/scripts/gcc-plugins/Kconfig
+index 74271dba4f94..21c842d26556 100644
+--- a/scripts/gcc-plugins/Kconfig
++++ b/scripts/gcc-plugins/Kconfig
+@@ -59,6 +59,11 @@ config GCC_PLUGIN_LATENT_ENTROPY
+ is some slowdown of the boot process (about 0.5%) and fork and
+ irq processing.
+
++ When extra_latent_entropy is passed on the kernel command line,
++ entropy will be extracted from up to the first 4GB of RAM while the
++ runtime memory allocator is being initialized. This costs even more
++ slowdown of the boot process.
++
+ Note that entropy extracted this way is not cryptographically
+ secure!
+
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
-index 1663fb19343a..4b44744fc1be 100644
+index f277e116e0eb..f93c582acc69 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
-@@ -35,6 +35,7 @@ static int vmlinux_section_warnings = 1;
- static int warn_unresolved = 0;
+@@ -36,6 +36,8 @@ static int warn_unresolved = 0;
/* How a symbol is exported */
static int sec_mismatch_count = 0;
-+static int writable_fptr_count = 0;
- static int sec_mismatch_verbose = 1;
static int sec_mismatch_fatal = 0;
++static int writable_fptr_count = 0;
++static int writable_fptr_verbose = 0;
/* ignore missing files */
-@@ -954,6 +955,7 @@ enum mismatch {
+ static int ignore_missing_files;
+
+@@ -953,6 +955,7 @@ enum mismatch {
ANY_EXIT_TO_ANY_INIT,
EXPORT_TO_INIT_EXIT,
EXTABLE_TO_NON_TEXT,
@@ -2443,7 +2494,7 @@ index 1663fb19343a..4b44744fc1be 100644
};
/**
-@@ -1080,6 +1082,12 @@ static const struct sectioncheck sectioncheck[] = {
+@@ -1079,6 +1082,12 @@ static const struct sectioncheck sectioncheck[] = {
.good_tosec = {ALL_TEXT_SECTIONS , NULL},
.mismatch = EXTABLE_TO_NON_TEXT,
.handler = extable_mismatch_handler,
@@ -2456,9 +2507,9 @@ index 1663fb19343a..4b44744fc1be 100644
}
};
-@@ -1229,10 +1237,10 @@ static Elf_Sym *find_elf_symbol(struct elf_info *elf, Elf64_Sword addr,
+@@ -1266,10 +1275,10 @@ static Elf_Sym *find_elf_symbol(struct elf_info *elf, Elf64_Sword addr,
continue;
- if (ELF_ST_TYPE(sym->st_info) == STT_SECTION)
+ if (!is_valid_name(elf, sym))
continue;
- if (sym->st_value == addr)
- return sym;
@@ -2469,54 +2520,70 @@ index 1663fb19343a..4b44744fc1be 100644
if (d < 0)
d = addr - sym->st_value;
if (d < distance) {
-@@ -1391,7 +1399,11 @@ static void report_sec_mismatch(const char *modname,
+@@ -1404,7 +1413,13 @@ static void report_sec_mismatch(const char *modname,
char *prl_from;
char *prl_to;
- sec_mismatch_count++;
-+ if (mismatch->mismatch == DATA_TO_TEXT)
++ if (mismatch->mismatch == DATA_TO_TEXT) {
+ writable_fptr_count++;
-+ else
++ if (!writable_fptr_verbose)
++ return;
++ } else {
+ sec_mismatch_count++;
-+
- if (!sec_mismatch_verbose)
- return;
++ }
-@@ -1515,6 +1527,14 @@ static void report_sec_mismatch(const char *modname,
+ get_pretty_name(from_is_func, &from, &from_p);
+ get_pretty_name(to_is_func, &to, &to_p);
+@@ -1526,6 +1541,12 @@ static void report_sec_mismatch(const char *modname,
fatal("There's a special handler for this mismatch type, "
"we should never get here.");
break;
+ case DATA_TO_TEXT:
-+#if 0
+ fprintf(stderr,
+ "The %s %s:%s references\n"
+ "the %s %s:%s%s\n",
+ from, fromsec, fromsym, to, tosec, tosym, to_p);
-+#endif
+ break;
}
fprintf(stderr, "\n");
}
-@@ -2523,6 +2543,14 @@ int main(int argc, char **argv)
- }
- }
+@@ -2428,7 +2449,7 @@ int main(int argc, char **argv)
+ struct ext_sym_list *extsym_iter;
+ struct ext_sym_list *extsym_start = NULL;
+
+- while ((opt = getopt(argc, argv, "i:I:e:mnsT:o:awE")) != -1) {
++ while ((opt = getopt(argc, argv, "i:I:e:fmnsT:o:awE")) != -1) {
+ switch (opt) {
+ case 'i':
+ kernel_read = optarg;
+@@ -2445,6 +2466,9 @@ int main(int argc, char **argv)
+ extsym_iter->file = optarg;
+ extsym_start = extsym_iter;
+ break;
++ case 'f':
++ writable_fptr_verbose = 1;
++ break;
+ case 'm':
+ modversions = 1;
+ break;
+@@ -2521,6 +2545,11 @@ int main(int argc, char **argv)
+ fatal("modpost: Section mismatches detected.\n"
+ "Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.\n");
free(buf.p);
-+ if (writable_fptr_count) {
-+ if (!sec_mismatch_verbose) {
-+ warn("modpost: Found %d writable function pointer(s).\n"
-+ "To see full details build your kernel with:\n"
-+ "'make CONFIG_DEBUG_SECTION_MISMATCH=y'\n",
-+ writable_fptr_count);
-+ }
-+ }
++ if (writable_fptr_count && !writable_fptr_verbose)
++ warn("modpost: Found %d writable function pointer%s.\n"
++ "To see full details build your kernel with:\n"
++ "'make CONFIG_DEBUG_WRITABLE_FUNCTION_POINTERS_VERBOSE=y'\n",
++ writable_fptr_count, (writable_fptr_count == 1 ? "" : "s"));
return err;
}
diff --git a/security/Kconfig b/security/Kconfig
-index c4302067a3ad..f5f5ff98e6b8 100644
+index 353cfef71d4e..d6b7f1d89985 100644
--- a/security/Kconfig
+++ b/security/Kconfig
-@@ -8,7 +8,7 @@ source security/keys/Kconfig
+@@ -8,7 +8,7 @@ source "security/keys/Kconfig"
config SECURITY_DMESG_RESTRICT
bool "Restrict unprivileged access to the kernel syslog"
@@ -2560,7 +2627,7 @@ index c4302067a3ad..f5f5ff98e6b8 100644
help
This allows you to choose different security modules to be
configured into your kernel.
-@@ -48,6 +72,7 @@ config SECURITYFS
+@@ -47,6 +71,7 @@ config SECURITYFS
config SECURITY_NETWORK
bool "Socket and Networking Security Hooks"
depends on SECURITY
@@ -2568,15 +2635,15 @@ index c4302067a3ad..f5f5ff98e6b8 100644
help
This enables the socket and networking security hooks.
If enabled, a security module can use these hooks to
-@@ -155,6 +180,7 @@ config HARDENED_USERCOPY
+@@ -153,6 +178,7 @@ config HARDENED_USERCOPY
+ bool "Harden memory copies between kernel and userspace"
depends on HAVE_HARDENED_USERCOPY_ALLOCATOR
- select BUG
imply STRICT_DEVMEM
+ default y
help
This option checks for obviously wrong memory regions when
copying memory to/from the kernel (via copy_to_user() and
-@@ -167,7 +193,6 @@ config HARDENED_USERCOPY
+@@ -165,7 +191,6 @@ config HARDENED_USERCOPY
config HARDENED_USERCOPY_FALLBACK
bool "Allow usercopy whitelist violations to fallback to object size"
depends on HARDENED_USERCOPY
@@ -2584,7 +2651,7 @@ index c4302067a3ad..f5f5ff98e6b8 100644
help
This is a temporary option that allows missing usercopy whitelists
to be discovered via a WARN() to the kernel log, instead of
-@@ -192,10 +217,36 @@ config HARDENED_USERCOPY_PAGESPAN
+@@ -190,10 +215,36 @@ config HARDENED_USERCOPY_PAGESPAN
config FORTIFY_SOURCE
bool "Harden common str/mem functions against buffer overflows"
depends on ARCH_HAS_FORTIFY_SOURCE
@@ -2622,7 +2689,7 @@ index c4302067a3ad..f5f5ff98e6b8 100644
bool "Force all usermode helper calls through a single binary"
help
diff --git a/security/selinux/Kconfig b/security/selinux/Kconfig
-index 8af7a690eb40..6539694b0fd3 100644
+index 55f032f1fc2d..7275fde1218d 100644
--- a/security/selinux/Kconfig
+++ b/security/selinux/Kconfig
@@ -2,7 +2,7 @@ config SECURITY_SELINUX
@@ -2634,7 +2701,7 @@ index 8af7a690eb40..6539694b0fd3 100644
help
This selects NSA Security-Enhanced Linux (SELinux).
You will also need a policy configuration and a labeled filesystem.
-@@ -79,23 +79,3 @@ config SECURITY_SELINUX_AVC_STATS
+@@ -64,23 +64,3 @@ config SECURITY_SELINUX_AVC_STATS
This option collects access vector cache statistics to
/selinux/avc/cache_stats, which may be monitored via
tools such as avcstat.
@@ -2659,11 +2726,11 @@ index 8af7a690eb40..6539694b0fd3 100644
-
- If you are unsure how to answer this question, answer 0.
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
-index 2b5ee5fbd652..99c7ed953d4e 100644
+index 614bc753822c..8c68df47483e 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
-@@ -135,18 +135,7 @@ __setup("selinux=", selinux_enabled_setup);
- int selinux_enabled = 1;
+@@ -134,18 +134,7 @@ static int __init selinux_enabled_setup(char *str)
+ __setup("selinux=", selinux_enabled_setup);
#endif
-static unsigned int selinux_checkreqprot_boot =
@@ -2680,13 +2747,21 @@ index 2b5ee5fbd652..99c7ed953d4e 100644
-__setup("checkreqprot=", checkreqprot_setup);
+static const unsigned int selinux_checkreqprot_boot;
- static struct kmem_cache *sel_inode_cache;
- static struct kmem_cache *file_security_cache;
+ /**
+ * selinux_secmark_enabled - Check to see if SECMARK is currently enabled
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
-index 79d3709b0671..4db06a12d48c 100644
+index 145ee62f205a..8a42d6a531a8 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
-@@ -664,10 +664,9 @@ static ssize_t sel_write_checkreqprot(struct file *file, const char __user *buf,
+@@ -640,7 +640,6 @@ static ssize_t sel_read_checkreqprot(struct file *filp, char __user *buf,
+ static ssize_t sel_write_checkreqprot(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+ {
+- struct selinux_fs_info *fsi = file_inode(file)->i_sb->s_fs_info;
+ char *page;
+ ssize_t length;
+ unsigned int new_value;
+@@ -664,10 +663,9 @@ static ssize_t sel_write_checkreqprot(struct file *file, const char __user *buf,
return PTR_ERR(page);
length = -EINVAL;
diff --git a/sys-kernel/linux-sources-redcore/files/mute-pps_state_mismatch.patch b/sys-kernel/linux-sources-redcore/files/5.1-mute-pps_state_mismatch.patch
index 5bc1eff7..5bc1eff7 100644
--- a/sys-kernel/linux-sources-redcore/files/mute-pps_state_mismatch.patch
+++ b/sys-kernel/linux-sources-redcore/files/5.1-mute-pps_state_mismatch.patch
diff --git a/sys-kernel/linux-sources-redcore/files/radeon_dp_aux_transfer_native-no-ratelimited_debug.patch b/sys-kernel/linux-sources-redcore/files/5.1-radeon_dp_aux_transfer_native-no-ratelimited_debug.patch
index 6ffcb42c..6ffcb42c 100644
--- a/sys-kernel/linux-sources-redcore/files/radeon_dp_aux_transfer_native-no-ratelimited_debug.patch
+++ b/sys-kernel/linux-sources-redcore/files/5.1-radeon_dp_aux_transfer_native-no-ratelimited_debug.patch
diff --git a/sys-kernel/linux-sources-redcore/files/uksm-for-linux-hardened.patch b/sys-kernel/linux-sources-redcore/files/5.1-uksm-linux-hardened.patch
index d973274a..a79cb3d5 100644
--- a/sys-kernel/linux-sources-redcore/files/uksm-for-linux-hardened.patch
+++ b/sys-kernel/linux-sources-redcore/files/5.1-uksm-linux-hardened.patch
@@ -1,20 +1,6 @@
-diff -Nur a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX
---- a/Documentation/vm/00-INDEX 2018-08-24 12:04:51.000000000 +0100
-+++ b/Documentation/vm/00-INDEX 2018-08-27 10:44:36.340467187 +0100
-@@ -18,7 +18,9 @@
- - explains what hwpoison is
- ksm.rst
- - how to use the Kernel Samepage Merging feature.
--mmu_notifier.rst
-+uksm.txt
-+ - Introduction to Ultra KSM
-+mmu_notifier.txt
- - a note about clearing pte/pmd and mmu notifications
- numa.rst
- - information about NUMA specific code in the Linux vm.
diff -Nur a/Documentation/vm/uksm.txt b/Documentation/vm/uksm.txt
--- a/Documentation/vm/uksm.txt 1970-01-01 01:00:00.000000000 +0100
-+++ b/Documentation/vm/uksm.txt 2018-08-27 10:44:36.340467187 +0100
++++ b/Documentation/vm/uksm.txt 2019-07-07 09:32:50.451840235 +0100
@@ -0,0 +1,61 @@
+The Ultra Kernel Samepage Merging feature
+----------------------------------------------
@@ -78,8 +64,8 @@ diff -Nur a/Documentation/vm/uksm.txt b/Documentation/vm/uksm.txt
+2016-09-10 UKSM 0.1.2.5 Fix a bug in dedup ratio calculation.
+2017-02-26 UKSM 0.1.2.6 Fix a bug in hugetlbpage handling and a race bug with page migration.
diff -Nur a/fs/exec.c b/fs/exec.c
---- a/fs/exec.c 2018-08-27 10:42:48.184976507 +0100
-+++ b/fs/exec.c 2018-08-27 10:47:39.413380371 +0100
+--- a/fs/exec.c 2019-07-07 09:08:19.132347946 +0100
++++ b/fs/exec.c 2019-07-07 09:33:47.653770486 +0100
@@ -63,6 +63,7 @@
#include <linux/compat.h>
#include <linux/vmalloc.h>
@@ -88,7 +74,7 @@ diff -Nur a/fs/exec.c b/fs/exec.c
#include <linux/uaccess.h>
#include <asm/mmu_context.h>
-@@ -1381,6 +1382,7 @@
+@@ -1385,6 +1386,7 @@
/* An exec changes our domain. We are no longer part of the thread
group */
current->self_exec_id++;
@@ -97,9 +83,9 @@ diff -Nur a/fs/exec.c b/fs/exec.c
}
EXPORT_SYMBOL(setup_new_exec);
diff -Nur a/fs/proc/meminfo.c b/fs/proc/meminfo.c
---- a/fs/proc/meminfo.c 2018-08-24 12:04:51.000000000 +0100
-+++ b/fs/proc/meminfo.c 2018-08-27 10:44:36.341467220 +0100
-@@ -105,6 +105,10 @@
+--- a/fs/proc/meminfo.c 2019-06-25 04:34:56.000000000 +0100
++++ b/fs/proc/meminfo.c 2019-07-07 09:32:50.451840235 +0100
+@@ -106,6 +106,10 @@
global_zone_page_state(NR_KERNEL_STACK_KB));
show_val_kb(m, "PageTables: ",
global_zone_page_state(NR_PAGETABLE));
@@ -111,9 +97,9 @@ diff -Nur a/fs/proc/meminfo.c b/fs/proc/meminfo.c
show_val_kb(m, "Quicklists: ", quicklist_total_size());
#endif
diff -Nur a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
---- a/include/asm-generic/pgtable.h 2018-08-24 12:04:51.000000000 +0100
-+++ b/include/asm-generic/pgtable.h 2018-08-27 10:44:36.341467220 +0100
-@@ -817,12 +817,25 @@
+--- a/include/asm-generic/pgtable.h 2019-06-25 04:34:56.000000000 +0100
++++ b/include/asm-generic/pgtable.h 2019-07-07 09:32:50.451840235 +0100
+@@ -855,12 +855,25 @@
extern void untrack_pfn_moved(struct vm_area_struct *vma);
#endif
@@ -140,7 +126,7 @@ diff -Nur a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
}
#define my_zero_pfn(addr) page_to_pfn(ZERO_PAGE(addr))
-@@ -831,7 +844,7 @@
+@@ -869,7 +882,7 @@
static inline int is_zero_pfn(unsigned long pfn)
{
extern unsigned long zero_pfn;
@@ -150,33 +136,43 @@ diff -Nur a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
static inline unsigned long my_zero_pfn(unsigned long addr)
diff -Nur a/include/linux/ksm.h b/include/linux/ksm.h
---- a/include/linux/ksm.h 2018-08-24 12:04:51.000000000 +0100
-+++ b/include/linux/ksm.h 2018-08-27 10:44:36.341467220 +0100
-@@ -21,21 +21,6 @@
+--- a/include/linux/ksm.h 2019-06-25 04:34:56.000000000 +0100
++++ b/include/linux/ksm.h 2019-07-07 09:32:50.451840235 +0100
+@@ -1,4 +1,4 @@
+-/* SPDX-License-Identifier: GPL-2.0 */
++/* SPDX-License-Identifier: GPL-3.0 */
+ #ifndef __LINUX_KSM_H
+ #define __LINUX_KSM_H
+ /*
+@@ -21,20 +21,16 @@
#ifdef CONFIG_KSM
int ksm_madvise(struct vm_area_struct *vma, unsigned long start,
unsigned long end, int advice, unsigned long *vm_flags);
-int __ksm_enter(struct mm_struct *mm);
-void __ksm_exit(struct mm_struct *mm);
--
+
-static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm)
--{
++static inline struct stable_node *page_stable_node(struct page *page)
+ {
- if (test_bit(MMF_VM_MERGEABLE, &oldmm->flags))
- return __ksm_enter(mm);
- return 0;
--}
--
++ return PageKsm(page) ? page_rmapping(page) : NULL;
+ }
+
-static inline void ksm_exit(struct mm_struct *mm)
--{
++static inline void set_page_stable_node(struct page *page,
++ struct stable_node *stable_node)
+ {
- if (test_bit(MMF_VM_MERGEABLE, &mm->flags))
- __ksm_exit(mm);
--}
++ page->mapping = (void *)((unsigned long)stable_node | PAGE_MAPPING_KSM);
+ }
/*
- * When do_swap_page() first faults in from swap what used to be a KSM page,
-@@ -54,6 +39,46 @@
- void rmap_walk_ksm(struct page *page, struct rmap_walk_control *rwc);
- void ksm_migrate_page(struct page *newpage, struct page *oldpage);
+@@ -56,6 +52,33 @@
+ bool reuse_ksm_page(struct page *page,
+ struct vm_area_struct *vma, unsigned long address);
+#ifdef CONFIG_KSM_LEGACY
+int __ksm_enter(struct mm_struct *mm);
@@ -203,25 +199,12 @@ diff -Nur a/include/linux/ksm.h b/include/linux/ksm.h
+static inline void ksm_exit(struct mm_struct *mm)
+{
+}
-+
-+static inline void set_page_stable_node(struct page *page,
-+ struct stable_node *stable_node)
-+{
-+ page->mapping = (void *)((unsigned long)stable_node | PAGE_MAPPING_KSM);
-+}
-+
-+static inline struct stable_node *page_stable_node(struct page *page)
-+{
-+ return PageKsm(page) ? page_rmapping(page) : NULL;
-+}
-+
-+
+#endif /* !CONFIG_UKSM */
+
#else /* !CONFIG_KSM */
static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm)
-@@ -89,4 +114,6 @@
+@@ -96,4 +119,6 @@
#endif /* CONFIG_MMU */
#endif /* !CONFIG_KSM */
@@ -229,9 +212,9 @@ diff -Nur a/include/linux/ksm.h b/include/linux/ksm.h
+
#endif /* __LINUX_KSM_H */
diff -Nur a/include/linux/mm_types.h b/include/linux/mm_types.h
---- a/include/linux/mm_types.h 2018-08-24 12:04:51.000000000 +0100
-+++ b/include/linux/mm_types.h 2018-08-27 10:44:36.342467252 +0100
-@@ -320,6 +320,9 @@
+--- a/include/linux/mm_types.h 2019-06-25 04:34:56.000000000 +0100
++++ b/include/linux/mm_types.h 2019-07-07 09:32:50.451840235 +0100
+@@ -334,6 +334,9 @@
struct mempolicy *vm_policy; /* NUMA policy for the VMA */
#endif
struct vm_userfaultfd_ctx vm_userfaultfd_ctx;
@@ -242,8 +225,8 @@ diff -Nur a/include/linux/mm_types.h b/include/linux/mm_types.h
struct core_thread {
diff -Nur a/include/linux/mmzone.h b/include/linux/mmzone.h
---- a/include/linux/mmzone.h 2018-08-24 12:04:51.000000000 +0100
-+++ b/include/linux/mmzone.h 2018-08-27 10:44:36.342467252 +0100
+--- a/include/linux/mmzone.h 2019-06-25 04:34:56.000000000 +0100
++++ b/include/linux/mmzone.h 2019-07-07 09:32:50.451840235 +0100
@@ -148,6 +148,9 @@
NR_ZSPAGES, /* allocated in zsmalloc */
#endif
@@ -254,18 +237,9 @@ diff -Nur a/include/linux/mmzone.h b/include/linux/mmzone.h
NR_VM_ZONE_STAT_ITEMS };
enum node_stat_item {
-@@ -865,7 +868,7 @@
- }
-
- /**
-- * is_highmem - helper function to quickly check if a struct zone is a
-+ * is_highmem - helper function to quickly check if a struct zone is a
- * highmem zone or not. This is an attempt to keep references
- * to ZONE_{DMA/NORMAL/HIGHMEM/etc} in general code to a minimum.
- * @zone - pointer to struct zone variable
diff -Nur a/include/linux/sradix-tree.h b/include/linux/sradix-tree.h
--- a/include/linux/sradix-tree.h 1970-01-01 01:00:00.000000000 +0100
-+++ b/include/linux/sradix-tree.h 2018-08-27 10:44:36.343467284 +0100
++++ b/include/linux/sradix-tree.h 2019-07-07 09:32:50.451840235 +0100
@@ -0,0 +1,77 @@
+#ifndef _LINUX_SRADIX_TREE_H
+#define _LINUX_SRADIX_TREE_H
@@ -346,7 +320,7 @@ diff -Nur a/include/linux/sradix-tree.h b/include/linux/sradix-tree.h
+#endif /* _LINUX_SRADIX_TREE_H */
diff -Nur a/include/linux/uksm.h b/include/linux/uksm.h
--- a/include/linux/uksm.h 1970-01-01 01:00:00.000000000 +0100
-+++ b/include/linux/uksm.h 2018-08-27 10:44:36.343467284 +0100
++++ b/include/linux/uksm.h 2019-07-07 09:32:50.451840235 +0100
@@ -0,0 +1,149 @@
+#ifndef __LINUX_UKSM_H
+#define __LINUX_UKSM_H
@@ -498,9 +472,9 @@ diff -Nur a/include/linux/uksm.h b/include/linux/uksm.h
+#endif /* !CONFIG_UKSM */
+#endif /* __LINUX_UKSM_H */
diff -Nur a/kernel/fork.c b/kernel/fork.c
---- a/kernel/fork.c 2018-08-27 10:42:48.208977282 +0100
-+++ b/kernel/fork.c 2018-08-27 10:44:36.344467317 +0100
-@@ -542,7 +542,7 @@
+--- a/kernel/fork.c 2019-07-07 09:08:19.152348621 +0100
++++ b/kernel/fork.c 2019-07-07 09:32:50.451840235 +0100
+@@ -584,7 +584,7 @@
__vma_link_rb(mm, tmp, rb_link, rb_parent);
rb_link = &tmp->vm_rb.rb_right;
rb_parent = &tmp->vm_rb;
@@ -510,20 +484,20 @@ diff -Nur a/kernel/fork.c b/kernel/fork.c
if (!(tmp->vm_flags & VM_WIPEONFORK))
retval = copy_page_range(mm, oldmm, mpnt);
diff -Nur a/lib/Makefile b/lib/Makefile
---- a/lib/Makefile 2018-08-24 12:04:51.000000000 +0100
-+++ b/lib/Makefile 2018-08-27 10:44:36.344467317 +0100
-@@ -18,7 +18,7 @@
- KCOV_INSTRUMENT_dynamic_debug.o := n
+--- a/lib/Makefile 2019-06-25 04:34:56.000000000 +0100
++++ b/lib/Makefile 2019-07-07 09:32:50.451840235 +0100
+@@ -29,7 +29,7 @@
+ endif
lib-y := ctype.o string.o vsprintf.o cmdline.o \
-- rbtree.o radix-tree.o timerqueue.o\
-+ rbtree.o radix-tree.o sradix-tree.o timerqueue.o\
+- rbtree.o radix-tree.o timerqueue.o xarray.o \
++ rbtree.o radix-tree.o sradix-tree.o timerqueue.o xarray.o \
idr.o int_sqrt.o extable.o \
- sha1.o chacha20.o irq_regs.o argv_split.o \
+ sha1.o chacha.o irq_regs.o argv_split.o \
flex_proportions.o ratelimit.o show_mem.o \
diff -Nur a/lib/sradix-tree.c b/lib/sradix-tree.c
--- a/lib/sradix-tree.c 1970-01-01 01:00:00.000000000 +0100
-+++ b/lib/sradix-tree.c 2018-08-27 10:44:36.344467317 +0100
++++ b/lib/sradix-tree.c 2019-07-07 09:32:50.451840235 +0100
@@ -0,0 +1,476 @@
+#include <linux/errno.h>
+#include <linux/mm.h>
@@ -1002,9 +976,9 @@ diff -Nur a/lib/sradix-tree.c b/lib/sradix-tree.c
+ return 0;
+}
diff -Nur a/mm/Kconfig b/mm/Kconfig
---- a/mm/Kconfig 2018-08-27 10:42:48.219977637 +0100
-+++ b/mm/Kconfig 2018-08-27 10:44:36.345467349 +0100
-@@ -308,6 +308,32 @@
+--- a/mm/Kconfig 2019-07-07 09:08:19.162348955 +0100
++++ b/mm/Kconfig 2019-07-07 09:32:50.451840235 +0100
+@@ -302,6 +302,32 @@
See Documentation/vm/ksm.rst for more information: KSM is inactive
until a program has madvised that an area is MADV_MERGEABLE, and
root has set /sys/kernel/mm/ksm/run to 1 (if CONFIG_SYSFS is set).
@@ -1037,10 +1011,31 @@ diff -Nur a/mm/Kconfig b/mm/Kconfig
config DEFAULT_MMAP_MIN_ADDR
int "Low address space to protect from user allocation"
+diff -Nur a/mm/ksm.c b/mm/ksm.c
+--- a/mm/ksm.c 2019-06-25 04:34:56.000000000 +0100
++++ b/mm/ksm.c 2019-07-07 09:32:50.461840572 +0100
+@@ -858,17 +858,6 @@
+ return err;
+ }
+
+-static inline struct stable_node *page_stable_node(struct page *page)
+-{
+- return PageKsm(page) ? page_rmapping(page) : NULL;
+-}
+-
+-static inline void set_page_stable_node(struct page *page,
+- struct stable_node *stable_node)
+-{
+- page->mapping = (void *)((unsigned long)stable_node | PAGE_MAPPING_KSM);
+-}
+-
+ #ifdef CONFIG_SYSFS
+ /*
+ * Only called through the sysfs control interface:
diff -Nur a/mm/Makefile b/mm/Makefile
---- a/mm/Makefile 2018-08-24 12:04:51.000000000 +0100
-+++ b/mm/Makefile 2018-08-27 10:44:36.345467349 +0100
-@@ -65,7 +65,8 @@
+--- a/mm/Makefile 2019-06-25 04:34:56.000000000 +0100
++++ b/mm/Makefile 2019-07-07 09:32:50.451840235 +0100
+@@ -58,7 +58,8 @@
obj-$(CONFIG_SPARSEMEM_VMEMMAP) += sparse-vmemmap.o
obj-$(CONFIG_SLOB) += slob.o
obj-$(CONFIG_MMU_NOTIFIER) += mmu_notifier.o
@@ -1051,9 +1046,9 @@ diff -Nur a/mm/Makefile b/mm/Makefile
obj-$(CONFIG_SLAB) += slab.o
obj-$(CONFIG_SLUB) += slub.o
diff -Nur a/mm/memory.c b/mm/memory.c
---- a/mm/memory.c 2018-08-24 12:04:51.000000000 +0100
-+++ b/mm/memory.c 2018-08-27 10:44:36.346467381 +0100
-@@ -128,6 +128,25 @@
+--- a/mm/memory.c 2019-06-25 04:34:56.000000000 +0100
++++ b/mm/memory.c 2019-07-07 09:32:50.461840572 +0100
+@@ -129,6 +129,25 @@
unsigned long highest_memmap_pfn __read_mostly;
@@ -1079,7 +1074,7 @@ diff -Nur a/mm/memory.c b/mm/memory.c
/*
* CONFIG_MMU architectures set up ZERO_PAGE in their paging_init()
*/
-@@ -139,6 +158,7 @@
+@@ -140,6 +159,7 @@
core_initcall(init_zero_pfn);
@@ -1087,7 +1082,7 @@ diff -Nur a/mm/memory.c b/mm/memory.c
#if defined(SPLIT_RSS_COUNTING)
void sync_mm_rss(struct mm_struct *mm)
-@@ -1035,6 +1055,9 @@
+@@ -794,6 +814,9 @@
get_page(page);
page_dup_rmap(page, false);
rss[mm_counter(page)]++;
@@ -1097,7 +1092,7 @@ diff -Nur a/mm/memory.c b/mm/memory.c
} else if (pte_devmap(pte)) {
page = pte_page(pte);
-@@ -1048,6 +1071,8 @@
+@@ -807,6 +830,8 @@
page_dup_rmap(page, false);
rss[mm_counter(page)]++;
}
@@ -1106,7 +1101,7 @@ diff -Nur a/mm/memory.c b/mm/memory.c
}
out_set_pte:
-@@ -1317,8 +1342,10 @@
+@@ -1075,8 +1100,10 @@
ptent = ptep_get_and_clear_full(mm, addr, pte,
tlb->fullmm);
tlb_remove_tlb_entry(tlb, pte, addr);
@@ -1118,7 +1113,7 @@ diff -Nur a/mm/memory.c b/mm/memory.c
if (!PageAnon(page)) {
if (pte_dirty(ptent)) {
-@@ -2360,8 +2387,10 @@
+@@ -2117,8 +2144,10 @@
clear_page(kaddr);
kunmap_atomic(kaddr);
flush_dcache_page(dst);
@@ -1130,7 +1125,7 @@ diff -Nur a/mm/memory.c b/mm/memory.c
}
static gfp_t __get_fault_gfp_mask(struct vm_area_struct *vma)
-@@ -2510,6 +2539,7 @@
+@@ -2266,6 +2295,7 @@
vmf->address);
if (!new_page)
goto oom;
@@ -1138,7 +1133,7 @@ diff -Nur a/mm/memory.c b/mm/memory.c
} else {
new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma,
vmf->address);
-@@ -2536,7 +2566,9 @@
+@@ -2294,7 +2324,9 @@
mm_counter_file(old_page));
inc_mm_counter_fast(mm, MM_ANONPAGES);
}
@@ -1149,25 +1144,25 @@ diff -Nur a/mm/memory.c b/mm/memory.c
}
flush_cache_page(vma, vmf->address, pte_pfn(vmf->orig_pte));
diff -Nur a/mm/mmap.c b/mm/mmap.c
---- a/mm/mmap.c 2018-08-27 10:42:48.220977669 +0100
-+++ b/mm/mmap.c 2018-08-27 10:44:36.348467446 +0100
-@@ -45,6 +45,7 @@
- #include <linux/moduleparam.h>
+--- a/mm/mmap.c 2019-07-07 09:08:19.162348955 +0100
++++ b/mm/mmap.c 2019-07-07 09:34:22.544947675 +0100
+@@ -46,6 +46,7 @@
#include <linux/pkeys.h>
#include <linux/oom.h>
+ #include <linux/sched/mm.h>
+#include <linux/ksm.h>
#include <linux/uaccess.h>
#include <asm/cacheflush.h>
-@@ -182,6 +183,7 @@
+@@ -183,6 +184,7 @@
if (vma->vm_file)
fput(vma->vm_file);
mpol_put(vma_policy(vma));
-+ uksm_remove_vma(vma);
++ uksm_remove_vma(vma);
vm_area_free(vma);
return next;
}
-@@ -708,9 +710,16 @@
+@@ -733,9 +735,16 @@
long adjust_next = 0;
int remove_next = 0;
@@ -1184,7 +1179,7 @@ diff -Nur a/mm/mmap.c b/mm/mmap.c
if (end >= next->vm_end) {
/*
* vma expands, overlapping all the next, and
-@@ -843,6 +852,7 @@
+@@ -868,6 +877,7 @@
end_changed = true;
}
vma->vm_pgoff = pgoff;
@@ -1192,7 +1187,7 @@ diff -Nur a/mm/mmap.c b/mm/mmap.c
if (adjust_next) {
next->vm_start += adjust_next << PAGE_SHIFT;
next->vm_pgoff += adjust_next;
-@@ -948,6 +958,7 @@
+@@ -973,6 +983,7 @@
if (remove_next == 2) {
remove_next = 1;
end = next->vm_end;
@@ -1200,7 +1195,7 @@ diff -Nur a/mm/mmap.c b/mm/mmap.c
goto again;
}
else if (next)
-@@ -974,10 +985,14 @@
+@@ -999,10 +1010,14 @@
*/
VM_WARN_ON(mm->highest_vm_end != vm_end_gap(vma));
}
@@ -1215,7 +1210,7 @@ diff -Nur a/mm/mmap.c b/mm/mmap.c
validate_mm(mm);
return 0;
-@@ -1434,6 +1449,9 @@
+@@ -1459,6 +1474,9 @@
vm_flags |= calc_vm_prot_bits(prot, pkey) | calc_vm_flag_bits(flags) |
mm->def_flags | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC;
@@ -1225,7 +1220,7 @@ diff -Nur a/mm/mmap.c b/mm/mmap.c
if (flags & MAP_LOCKED)
if (!can_do_mlock())
return -EPERM;
-@@ -1798,6 +1816,7 @@
+@@ -1823,6 +1841,7 @@
allow_write_access(file);
}
file = vma->vm_file;
@@ -1233,7 +1228,7 @@ diff -Nur a/mm/mmap.c b/mm/mmap.c
out:
perf_event_mmap(vma);
-@@ -1839,6 +1858,7 @@
+@@ -1865,6 +1884,7 @@
if (vm_flags & VM_DENYWRITE)
allow_write_access(file);
free_vma:
@@ -1241,7 +1236,7 @@ diff -Nur a/mm/mmap.c b/mm/mmap.c
vm_area_free(vma);
unacct_error:
if (charged)
-@@ -2658,6 +2678,8 @@
+@@ -2697,6 +2717,8 @@
else
err = vma_adjust(vma, vma->vm_start, addr, vma->vm_pgoff, new);
@@ -1250,7 +1245,7 @@ diff -Nur a/mm/mmap.c b/mm/mmap.c
/* Success. */
if (!err)
return 0;
-@@ -2943,6 +2965,7 @@
+@@ -3001,6 +3023,7 @@
if ((flags & (~VM_EXEC)) != 0)
return -EINVAL;
flags |= VM_DATA_DEFAULT_FLAGS | VM_ACCOUNT | mm->def_flags;
@@ -1258,7 +1253,7 @@ diff -Nur a/mm/mmap.c b/mm/mmap.c
error = get_unmapped_area(NULL, addr, len, 0, MAP_FIXED);
if (offset_in_page(error))
-@@ -2999,6 +3022,7 @@
+@@ -3051,6 +3074,7 @@
vma->vm_flags = flags;
vma->vm_page_prot = vm_get_page_prot(flags);
vma_link(mm, vma, prev, rb_link, rb_parent);
@@ -1266,7 +1261,7 @@ diff -Nur a/mm/mmap.c b/mm/mmap.c
out:
perf_event_mmap(vma);
mm->total_vm += len >> PAGE_SHIFT;
-@@ -3078,6 +3102,12 @@
+@@ -3128,6 +3152,12 @@
up_write(&mm->mmap_sem);
}
@@ -1279,7 +1274,7 @@ diff -Nur a/mm/mmap.c b/mm/mmap.c
if (mm->locked_vm) {
vma = mm->mmap;
while (vma) {
-@@ -3112,6 +3142,11 @@
+@@ -3162,6 +3192,11 @@
vma = remove_vma(vma);
}
vm_unacct_memory(nr_accounted);
@@ -1291,7 +1286,7 @@ diff -Nur a/mm/mmap.c b/mm/mmap.c
}
/* Insert vm structure into process list sorted by address
-@@ -3219,6 +3254,7 @@
+@@ -3269,6 +3304,7 @@
new_vma->vm_ops->open(new_vma);
vma_link(mm, new_vma, prev, rb_link, rb_parent);
*need_rmap_locks = false;
@@ -1299,7 +1294,7 @@ diff -Nur a/mm/mmap.c b/mm/mmap.c
}
return new_vma;
-@@ -3369,6 +3405,7 @@
+@@ -3419,6 +3455,7 @@
vm_stat_account(mm, vma->vm_flags, len >> PAGE_SHIFT);
perf_event_mmap(vma);
@@ -1307,25 +1302,10 @@ diff -Nur a/mm/mmap.c b/mm/mmap.c
return vma;
-diff -Nur a/mm/rmap.c b/mm/rmap.c
---- a/mm/rmap.c 2018-08-24 12:04:51.000000000 +0100
-+++ b/mm/rmap.c 2018-08-27 10:44:36.348467446 +0100
-@@ -1017,9 +1017,9 @@
-
- /**
- * __page_set_anon_rmap - set up new anonymous rmap
-- * @page: Page to add to rmap
-+ * @page: Page to add to rmap
- * @vma: VM area to add page to.
-- * @address: User virtual address of the mapping
-+ * @address: User virtual address of the mapping
- * @exclusive: the page is exclusively owned by the current process
- */
- static void __page_set_anon_rmap(struct page *page,
diff -Nur a/mm/uksm.c b/mm/uksm.c
--- a/mm/uksm.c 1970-01-01 01:00:00.000000000 +0100
-+++ b/mm/uksm.c 2018-08-27 10:44:36.351467543 +0100
-@@ -0,0 +1,5584 @@
++++ b/mm/uksm.c 2019-07-07 09:32:50.461840572 +0100
+@@ -0,0 +1,5580 @@
+/*
+ * Ultra KSM. Copyright (C) 2011-2012 Nai Xia
+ *
@@ -2821,10 +2801,9 @@ diff -Nur a/mm/uksm.c b/mm/uksm.c
+ .page = page,
+ .vma = vma,
+ };
++ struct mmu_notifier_range range;
+ int swapped;
+ int err = -EFAULT;
-+ unsigned long mmun_start; /* For mmu_notifiers */
-+ unsigned long mmun_end; /* For mmu_notifiers */
+
+ pvmw.address = page_address_in_vma(page, vma);
+ if (pvmw.address == -EFAULT)
@@ -2832,9 +2811,8 @@ diff -Nur a/mm/uksm.c b/mm/uksm.c
+
+ BUG_ON(PageTransCompound(page));
+
-+ mmun_start = pvmw.address;
-+ mmun_end = pvmw.address + PAGE_SIZE;
-+ mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);
++ mmu_notifier_range_init(&range, mm, pvmw.address, pvmw.address + PAGE_SIZE);
++ mmu_notifier_invalidate_range_start(&range);
+
+ if (!page_vma_mapped_walk(&pvmw))
+ goto out_mn;
@@ -2884,7 +2862,7 @@ diff -Nur a/mm/uksm.c b/mm/uksm.c
+out_unlock:
+ page_vma_mapped_walk_done(&pvmw);
+out_mn:
-+ mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
++ mmu_notifier_invalidate_range_end(&range);
+out:
+ return err;
+}
@@ -2908,6 +2886,7 @@ diff -Nur a/mm/uksm.c b/mm/uksm.c
+ struct page *kpage, pte_t orig_pte)
+{
+ struct mm_struct *mm = vma->vm_mm;
++ struct mmu_notifier_range range;
+ pgd_t *pgd;
+ p4d_t *p4d;
+ pud_t *pud;
@@ -2918,8 +2897,6 @@ diff -Nur a/mm/uksm.c b/mm/uksm.c
+
+ unsigned long addr;
+ int err = MERGE_ERR_PGERR;
-+ unsigned long mmun_start; /* For mmu_notifiers */
-+ unsigned long mmun_end; /* For mmu_notifiers */
+
+ addr = page_address_in_vma(page, vma);
+ if (addr == -EFAULT)
@@ -2939,9 +2916,8 @@ diff -Nur a/mm/uksm.c b/mm/uksm.c
+ if (!pmd_present(*pmd))
+ goto out;
+
-+ mmun_start = addr;
-+ mmun_end = addr + PAGE_SIZE;
-+ mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);
++ mmu_notifier_range_init(&range, mm, addr, addr + PAGE_SIZE);
++ mmu_notifier_invalidate_range_start(&range);
+
+ ptep = pte_offset_map_lock(mm, pmd, addr, &ptl);
+ if (!pte_same(*ptep, orig_pte)) {
@@ -2974,7 +2950,7 @@ diff -Nur a/mm/uksm.c b/mm/uksm.c
+ pte_unmap_unlock(ptep, ptl);
+ err = 0;
+out_mn:
-+ mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
++ mmu_notifier_invalidate_range_end(&range);
+out:
+ return err;
+}
@@ -6911,11 +6887,11 @@ diff -Nur a/mm/uksm.c b/mm/uksm.c
+#endif
+
diff -Nur a/mm/vmstat.c b/mm/vmstat.c
---- a/mm/vmstat.c 2018-08-24 12:04:51.000000000 +0100
-+++ b/mm/vmstat.c 2018-08-27 10:44:36.352467575 +0100
-@@ -1163,6 +1163,9 @@
+--- a/mm/vmstat.c 2019-06-25 04:34:56.000000000 +0100
++++ b/mm/vmstat.c 2019-07-07 09:32:50.461840572 +0100
+@@ -1165,6 +1165,9 @@
"nr_written",
- "", /* nr_indirectly_reclaimable */
+ "nr_kernel_misc_reclaimable",
+#ifdef CONFIG_UKSM
+ "nr_uksm_zero_pages",
diff --git a/sys-kernel/linux-sources-redcore/files/nouveau-pascal-backlight.patch b/sys-kernel/linux-sources-redcore/files/nouveau-pascal-backlight.patch
deleted file mode 100644
index 754d982a..00000000
--- a/sys-kernel/linux-sources-redcore/files/nouveau-pascal-backlight.patch
+++ /dev/null
@@ -1,11 +0,0 @@
-diff -up linux-4.16/drivers/gpu/drm/nouveau/nouveau_backlight.c.omv~ linux-4.16/drivers/gpu/drm/nouveau/nouveau_backlight.c
---- linux-4.16/drivers/gpu/drm/nouveau/nouveau_backlight.c.omv~ 2018-04-06 01:04:34.573357055 +0200
-+++ linux-4.16/drivers/gpu/drm/nouveau/nouveau_backlight.c 2018-04-06 01:05:46.985579248 +0200
-@@ -287,6 +287,7 @@ nouveau_backlight_init(struct drm_device
- case NV_DEVICE_INFO_V0_FERMI:
- case NV_DEVICE_INFO_V0_KEPLER:
- case NV_DEVICE_INFO_V0_MAXWELL:
-+ case NV_DEVICE_INFO_V0_PASCAL:
- return nv50_backlight_init(connector);
- default:
- break;
diff --git a/sys-kernel/linux-sources-redcore/files/revert-patches-causing-instant-reboot.patch b/sys-kernel/linux-sources-redcore/files/revert-patches-causing-instant-reboot.patch
deleted file mode 100644
index a2127cff..00000000
--- a/sys-kernel/linux-sources-redcore/files/revert-patches-causing-instant-reboot.patch
+++ /dev/null
@@ -1,314 +0,0 @@
-diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
-index 8169e8b7a4dc..12915511be61 100644
---- a/arch/x86/boot/compressed/head_64.S
-+++ b/arch/x86/boot/compressed/head_64.S
-@@ -305,48 +305,13 @@ ENTRY(startup_64)
- /* Set up the stack */
- leaq boot_stack_end(%rbx), %rsp
-
-- /*
-- * paging_prepare() and cleanup_trampoline() below can have GOT
-- * references. Adjust the table with address we are running at.
-- *
-- * Zero RAX for adjust_got: the GOT was not adjusted before;
-- * there's no adjustment to undo.
-- */
-- xorq %rax, %rax
--
-- /*
-- * Calculate the address the binary is loaded at and use it as
-- * a GOT adjustment.
-- */
-- call 1f
--1: popq %rdi
-- subq $1b, %rdi
--
-- call adjust_got
--
- /*
- * At this point we are in long mode with 4-level paging enabled,
-- * but we might want to enable 5-level paging or vice versa.
-- *
-- * The problem is that we cannot do it directly. Setting or clearing
-- * CR4.LA57 in long mode would trigger #GP. So we need to switch off
-- * long mode and paging first.
-- *
-- * We also need a trampoline in lower memory to switch over from
-- * 4- to 5-level paging for cases when the bootloader puts the kernel
-- * above 4G, but didn't enable 5-level paging for us.
-- *
-- * The same trampoline can be used to switch from 5- to 4-level paging
-- * mode, like when starting 4-level paging kernel via kexec() when
-- * original kernel worked in 5-level paging mode.
-- *
-- * For the trampoline, we need the top page table to reside in lower
-- * memory as we don't have a way to load 64-bit values into CR3 in
-- * 32-bit mode.
-+ * but we want to enable 5-level paging.
- *
-- * We go though the trampoline even if we don't have to: if we're
-- * already in a desired paging mode. This way the trampoline code gets
-- * tested on every boot.
-+ * The problem is that we cannot do it directly. Setting LA57 in
-+ * long mode would trigger #GP. So we need to switch off long mode
-+ * first.
- */
-
- /* Make sure we have GDT with 32-bit code segment */
-@@ -371,32 +336,40 @@ ENTRY(startup_64)
- /* Save the trampoline address in RCX */
- movq %rax, %rcx
-
-+ /* Check if we need to enable 5-level paging */
-+ cmpq $0, %rdx
-+ jz lvl5
-+
-+ /* Clear additional page table */
-+ leaq lvl5_pgtable(%rbx), %rdi
-+ xorq %rax, %rax
-+ movq $(PAGE_SIZE/8), %rcx
-+ rep stosq
-+
- /*
-- * Load the address of trampoline_return() into RDI.
-- * It will be used by the trampoline to return to the main code.
-+ * Setup current CR3 as the first and only entry in a new top level
-+ * page table.
- */
-- leaq trampoline_return(%rip), %rdi
-+ movq %cr3, %rdi
-+ leaq 0x7 (%rdi), %rax
-+ movq %rax, lvl5_pgtable(%rbx)
-
- /* Switch to compatibility mode (CS.L = 0 CS.D = 1) via far return */
- pushq $__KERNEL32_CS
-- leaq TRAMPOLINE_32BIT_CODE_OFFSET(%rax), %rax
-+ leaq compatible_mode(%rip), %rax
- pushq %rax
- lretq
--trampoline_return:
-+lvl5:
- /* Restore the stack, the 32-bit trampoline uses its own stack */
- leaq boot_stack_end(%rbx), %rsp
-
- /*
- * cleanup_trampoline() would restore trampoline memory.
- *
-- * RDI is address of the page table to use instead of page table
-- * in trampoline memory (if required).
-- *
- * RSI holds real mode data and needs to be preserved across
- * this function call.
- */
- pushq %rsi
-- leaq top_pgtable(%rbx), %rdi
- call cleanup_trampoline
- popq %rsi
-
-@@ -404,21 +377,6 @@ trampoline_return:
- pushq $0
- popfq
-
-- /*
-- * Previously we've adjusted the GOT with address the binary was
-- * loaded at. Now we need to re-adjust for relocation address.
-- *
-- * Calculate the address the binary is loaded at, so that we can
-- * undo the previous GOT adjustment.
-- */
-- call 1f
--1: popq %rax
-- subq $1b, %rax
--
-- /* The new adjustment is the relocation address */
-- movq %rbx, %rdi
-- call adjust_got
--
- /*
- * Copy the compressed kernel to the end of our buffer
- * where decompression in place becomes safe.
-@@ -519,6 +477,19 @@ relocated:
- shrq $3, %rcx
- rep stosq
-
-+/*
-+ * Adjust our own GOT
-+ */
-+ leaq _got(%rip), %rdx
-+ leaq _egot(%rip), %rcx
-+1:
-+ cmpq %rcx, %rdx
-+ jae 2f
-+ addq %rbx, (%rdx)
-+ addq $8, %rdx
-+ jmp 1b
-+2:
-+
- /*
- * Do the extraction, and jump to the new kernel..
- */
-@@ -537,36 +508,9 @@ relocated:
- */
- jmp *%rax
-
--/*
-- * Adjust the global offset table
-- *
-- * RAX is the previous adjustment of the table to undo (use 0 if it's the
-- * first time we touch GOT).
-- * RDI is the new adjustment to apply.
-- */
--adjust_got:
-- /* Walk through the GOT adding the address to the entries */
-- leaq _got(%rip), %rdx
-- leaq _egot(%rip), %rcx
--1:
-- cmpq %rcx, %rdx
-- jae 2f
-- subq %rax, (%rdx) /* Undo previous adjustment */
-- addq %rdi, (%rdx) /* Apply the new adjustment */
-- addq $8, %rdx
-- jmp 1b
--2:
-- ret
--
- .code32
--/*
-- * This is the 32-bit trampoline that will be copied over to low memory.
-- *
-- * RDI contains the return address (might be above 4G).
-- * ECX contains the base address of the trampoline memory.
-- * Non zero RDX on return means we need to enable 5-level paging.
-- */
- ENTRY(trampoline_32bit_src)
-+compatible_mode:
- /* Set up data and stack segments */
- movl $__KERNEL_DS, %eax
- movl %eax, %ds
-@@ -580,61 +524,33 @@ ENTRY(trampoline_32bit_src)
- btrl $X86_CR0_PG_BIT, %eax
- movl %eax, %cr0
-
-- /* Check what paging mode we want to be in after the trampoline */
-- cmpl $0, %edx
-- jz 1f
-+ /* Point CR3 to 5-level paging */
-+ leal lvl5_pgtable(%ebx), %eax
-+ movl %eax, %cr3
-
-- /* We want 5-level paging: don't touch CR3 if it already points to 5-level page tables */
-+ /* Enable PAE and LA57 mode */
- movl %cr4, %eax
-- testl $X86_CR4_LA57, %eax
-- jnz 3f
-- jmp 2f
--1:
-- /* We want 4-level paging: don't touch CR3 if it already points to 4-level page tables */
-- movl %cr4, %eax
-- testl $X86_CR4_LA57, %eax
-- jz 3f
--2:
-- /* Point CR3 to the trampoline's new top level page table */
-- leal TRAMPOLINE_32BIT_PGTABLE_OFFSET(%ecx), %eax
-- movl %eax, %cr3
--3:
-- /* Enable PAE and LA57 (if required) paging modes */
-- movl $X86_CR4_PAE, %eax
-- cmpl $0, %edx
-- jz 1f
-- orl $X86_CR4_LA57, %eax
--1:
-+ orl $(X86_CR4_PAE | X86_CR4_LA57), %eax
- movl %eax, %cr4
-
-- /* Calculate address of paging_enabled() once we are executing in the trampoline */
-- leal paging_enabled - trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_OFFSET(%ecx), %eax
-+ /* Calculate address we are running at */
-+ call 1f
-+1: popl %edi
-+ subl $1b, %edi
-
-- /* Prepare the stack for far return to Long Mode */
-+ /* Prepare stack for far return to Long Mode */
- pushl $__KERNEL_CS
-- pushl %eax
-+ leal lvl5(%edi), %eax
-+ push %eax
-
-- /* Enable paging again */
-+ /* Enable paging back */
- movl $(X86_CR0_PG | X86_CR0_PE), %eax
- movl %eax, %cr0
-
- lret
-
-- .code64
--paging_enabled:
-- /* Return from the trampoline */
-- jmp *%rdi
--
-- /*
-- * The trampoline code has a size limit.
-- * Make sure we fail to compile if the trampoline code grows
-- * beyond TRAMPOLINE_32BIT_CODE_SIZE bytes.
-- */
-- .org trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_SIZE
--
-- .code32
- no_longmode:
-- /* This isn't an x86-64 CPU, so hang intentionally, we cannot continue */
-+ /* This isn't an x86-64 CPU so hang */
- 1:
- hlt
- jmp 1b
-@@ -695,10 +611,5 @@ boot_stack_end:
- .balign 4096
- pgtable:
- .fill BOOT_PGT_SIZE, 1, 0
--
--/*
-- * The page table is going to be used instead of page table in the trampoline
-- * memory.
-- */
--top_pgtable:
-+lvl5_pgtable:
- .fill PAGE_SIZE, 1, 0
-diff --git a/arch/x86/boot/compressed/pgtable_64.c b/arch/x86/boot/compressed/pgtable_64.c
-index a362fa0b849c..32af1cbcd903 100644
---- a/arch/x86/boot/compressed/pgtable_64.c
-+++ b/arch/x86/boot/compressed/pgtable_64.c
-@@ -22,6 +22,14 @@ struct paging_config {
- /* Buffer to preserve trampoline memory */
- static char trampoline_save[TRAMPOLINE_32BIT_SIZE];
-
-+/*
-+ * The page table is going to be used instead of page table in the trampoline
-+ * memory.
-+ *
-+ * It must not be in BSS as BSS is cleared after cleanup_trampoline().
-+ */
-+static char top_pgtable[PAGE_SIZE] __aligned(PAGE_SIZE) __section(.data);
-+
- /*
- * Trampoline address will be printed by extract_kernel() for debugging
- * purposes.
-@@ -126,7 +134,7 @@ struct paging_config paging_prepare(void)
- return paging_config;
- }
-
--void cleanup_trampoline(void *pgtable)
-+void cleanup_trampoline(void)
- {
- void *trampoline_pgtable;
-
-@@ -137,8 +145,8 @@ void cleanup_trampoline(void *pgtable)
- * if it's there.
- */
- if ((void *)__native_read_cr3() == trampoline_pgtable) {
-- memcpy(pgtable, trampoline_pgtable, PAGE_SIZE);
-- native_write_cr3((unsigned long)pgtable);
-+ memcpy(top_pgtable, trampoline_pgtable, PAGE_SIZE);
-+ native_write_cr3((unsigned long)top_pgtable);
- }
-
- /* Restore trampoline memory */
diff --git a/sys-kernel/linux-sources-redcore/files/workaround-BIOS-bugs-on-CCP-SVE-ryzen-TR.patch b/sys-kernel/linux-sources-redcore/files/workaround-BIOS-bugs-on-CCP-SVE-ryzen-TR.patch
deleted file mode 100644
index 1d1ae0e3..00000000
--- a/sys-kernel/linux-sources-redcore/files/workaround-BIOS-bugs-on-CCP-SVE-ryzen-TR.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-diff -up linux-4.18/drivers/crypto/ccp/psp-dev.c.0333~ linux-4.18/drivers/crypto/ccp/psp-dev.c
---- linux-4.18/drivers/crypto/ccp/psp-dev.c.0333~ 2018-08-21 19:32:36.457890957 +0200
-+++ linux-4.18/drivers/crypto/ccp/psp-dev.c 2018-08-21 19:35:43.283028769 +0200
-@@ -38,6 +38,17 @@ static DEFINE_MUTEX(sev_cmd_mutex);
- static struct sev_misc_dev *misc_dev;
- static struct psp_device *psp_master;
-
-+static int psp_cmd_timeout = 100;
-+module_param(psp_cmd_timeout, int, 0644);
-+MODULE_PARM_DESC(psp_cmd_timeout, " default timeout value, in seconds, for PSP commands");
-+
-+static int psp_probe_timeout = 5;
-+module_param(psp_probe_timeout, int, 0644);
-+MODULE_PARM_DESC(psp_probe_timeout, " default timeout value, in seconds, during PSP device probe");
-+
-+static bool psp_dead;
-+static int psp_timeout;
-+
- static struct psp_device *psp_alloc_struct(struct sp_device *sp)
- {
- struct device *dev = sp->dev;
-@@ -82,10 +93,15 @@ done:
- return IRQ_HANDLED;
- }
-
--static void sev_wait_cmd_ioc(struct psp_device *psp, unsigned int *reg)
-+static int sev_wait_cmd_ioc(struct psp_device *psp, unsigned int *reg, unsigned int timeout)
- {
-- wait_event(psp->sev_int_queue, psp->sev_int_rcvd);
-+ int ret;
-+ ret = wait_event_timeout(psp->sev_int_queue, psp->sev_int_rcvd,
-+ timeout * HZ);
-+ if (!ret)
-+ return -ETIMEDOUT;
- *reg = ioread32(psp->io_regs + PSP_CMDRESP);
-+ return 0;
- }
-
- static int sev_cmd_buffer_len(int cmd)
-@@ -133,12 +149,15 @@ static int __sev_do_cmd_locked(int cmd,
- if (!psp)
- return -ENODEV;
-
-+ if (psp_dead)
-+ return -EBUSY;
-+
- /* Get the physical address of the command buffer */
- phys_lsb = data ? lower_32_bits(__psp_pa(data)) : 0;
- phys_msb = data ? upper_32_bits(__psp_pa(data)) : 0;
-
-- dev_dbg(psp->dev, "sev command id %#x buffer 0x%08x%08x\n",
-- cmd, phys_msb, phys_lsb);
-+ dev_dbg(psp->dev, "sev command id %#x buffer 0x%08x%08x timeout %us\n",
-+ cmd, phys_msb, phys_lsb, psp_timeout);
-
- print_hex_dump_debug("(in): ", DUMP_PREFIX_OFFSET, 16, 2, data,
- sev_cmd_buffer_len(cmd), false);
-@@ -154,7 +173,17 @@ static int __sev_do_cmd_locked(int cmd,
- iowrite32(reg, psp->io_regs + PSP_CMDRESP);
-
- /* wait for command completion */
-- sev_wait_cmd_ioc(psp, &reg);
-+ ret = sev_wait_cmd_ioc(psp, &reg, psp_timeout);
-+ if (ret) {
-+ if (psp_ret)
-+ *psp_ret = 0;
-+
-+ dev_err(psp->dev, "sev command %#x timed out, disabling PSP\n", cmd);
-+ psp_dead = true;
-+ return ret;
-+ }
-+
-+ psp_timeout = psp_cmd_timeout;
-
- if (psp_ret)
- *psp_ret = reg & PSP_CMDRESP_ERR_MASK;
-@@ -886,6 +915,8 @@ void psp_pci_init(void)
-
- psp_master = sp->psp_data;
-
-+ psp_timeout = psp_probe_timeout;
-+
- if (sev_get_api_version())
- goto err;
-