summaryrefslogtreecommitdiff
path: root/sys-kernel/linux-sources-redcore-lts-legacy
diff options
context:
space:
mode:
Diffstat (limited to 'sys-kernel/linux-sources-redcore-lts-legacy')
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/Manifest1
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0001-MultiQueue-Skiplist-Scheduler-version-v0.180-linux-hardened.patch10305
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0002-Fix-Werror-build-failure-in-tools.patch12
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0003-Make-preemptible-kernel-default.patch4648
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0004-Expose-vmsplit-for-our-poor-32-bit-users.patch48
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0005-Create-highres-timeout-variants-of-schedule_timeout-.patch153
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0006-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch49
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0007-Convert-msleep-to-use-hrtimers-when-active.patch54
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0008-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch1009
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0009-Replace-all-calls-to-schedule_timeout_interruptible-.patch311
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0010-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch160
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0011-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch69
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0012-Make-threaded-IRQs-optionally-the-default-which-can-.patch67
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0013-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch81
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0014-Swap-sucks.patch25
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0015-unfuck-MuQSS-on-linux-4_19_10+.patch14
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0016-unfuck-MuQSS-on-linux-4_19_20+.patch11
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-amd64.config9349
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-ata-fix-NCQ-LOG-strings-and-move-to-debug.patch23
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-drop_ancient-and-wrong-msg.patch29
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-enable_alx_wol.patch485
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-linux-hardened.patch2736
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-mute-pps_state_mismatch.patch16
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-nouveau-pascal-backlight.patch11
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-radeon_dp_aux_transfer_native-no-ratelimited_debug.patch13
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-uksm-linux-hardened.patch6941
-rw-r--r--sys-kernel/linux-sources-redcore-lts-legacy/linux-sources-redcore-lts-4.19.98.ebuild91
27 files changed, 36711 insertions, 0 deletions
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/Manifest b/sys-kernel/linux-sources-redcore-lts-legacy/Manifest
new file mode 100644
index 00000000..448e8fb1
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/Manifest
@@ -0,0 +1 @@
+DIST linux-4.19.98.tar.xz 103395152 BLAKE2B 622b8f8be3b20f40a0fc4029667077dc0cbb6ce319827967b8749067957af271e1794e1184853351b040a6a1ae5f1a68c769e89db8fe91b3e206d3608bcd89be SHA512 701513873826326cedfc2a1dbb7796f0047f7105bd1cb6478595676b5c3be7be71752398dc3c4a638f0853824ff3426ea9d20448264e1b0c126c3f0eba763ac6
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0001-MultiQueue-Skiplist-Scheduler-version-v0.180-linux-hardened.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0001-MultiQueue-Skiplist-Scheduler-version-v0.180-linux-hardened.patch
new file mode 100644
index 00000000..ee298f6a
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0001-MultiQueue-Skiplist-Scheduler-version-v0.180-linux-hardened.patch
@@ -0,0 +1,10305 @@
+diff -Nur a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
+--- a/arch/powerpc/platforms/cell/spufs/sched.c 2019-02-06 16:30:16.000000000 +0000
++++ b/arch/powerpc/platforms/cell/spufs/sched.c 2019-02-09 17:46:11.991297545 +0000
+@@ -65,11 +65,6 @@
+ static struct timer_list spuloadavg_timer;
+
+ /*
+- * Priority of a normal, non-rt, non-niced'd process (aka nice level 0).
+- */
+-#define NORMAL_PRIO 120
+-
+-/*
+ * Frequency of the spu scheduler tick. By default we do one SPU scheduler
+ * tick for every 10 CPU scheduler ticks.
+ */
+diff -Nur a/arch/x86/Kconfig b/arch/x86/Kconfig
+--- a/arch/x86/Kconfig 2019-02-09 17:20:30.461820549 +0000
++++ b/arch/x86/Kconfig 2019-02-09 17:51:10.780941815 +0000
+@@ -1003,6 +1003,20 @@
+ config SCHED_SMT
+ def_bool y if SMP
+
++config SMT_NICE
++ bool "SMT (Hyperthreading) aware nice priority and policy support"
++ depends on SCHED_MUQSS && SCHED_SMT
++ default y
++ ---help---
++ Enabling Hyperthreading on Intel CPUs decreases the effectiveness
++ of the use of 'nice' levels and different scheduling policies
++ (e.g. realtime) due to sharing of CPU power between hyperthreads.
++ SMT nice support makes each logical CPU aware of what is running on
++ its hyperthread siblings, maintaining appropriate distribution of
++ CPU according to nice levels and scheduling policies at the expense
++ of slightly increased overhead.
++ If unsure say Y here.
++
+ config SCHED_MC
+ def_bool y
+ prompt "Multi-core scheduler support"
+@@ -1033,6 +1047,80 @@
+
+ If unsure say Y here.
+
++choice
++ prompt "CPU scheduler runqueue sharing"
++ default RQ_MC if SCHED_MUQSS
++ default RQ_NONE
++
++config RQ_NONE
++ bool "No sharing"
++ help
++ This is the default behaviour where the CPU scheduler has one runqueue
++ per CPU, whether it is a physical or logical CPU (hyperthread).
++
++ This can still be enabled runtime with the boot parameter
++ rqshare=none
++
++ If unsure, say N.
++
++config RQ_SMT
++ bool "SMT (hyperthread) siblings"
++ depends on SCHED_SMT && SCHED_MUQSS
++
++ help
++ With this option enabled, the CPU scheduler will have one runqueue
++ shared by SMT (hyperthread) siblings. As these logical cores share
++ one physical core, sharing the runqueue resource can lead to decreased
++ overhead, lower latency and higher throughput.
++
++ This can still be enabled runtime with the boot parameter
++ rqshare=smt
++
++ If unsure, say N.
++
++config RQ_MC
++ bool "Multicore siblings"
++ depends on SCHED_MC && SCHED_MUQSS
++ help
++ With this option enabled, the CPU scheduler will have one runqueue
++ shared by multicore siblings in addition to any SMT siblings.
++ As these physical cores share caches, sharing the runqueue resource
++ will lead to lower latency, but its effects on overhead and throughput
++ are less predictable. As a general rule, 6 or fewer cores will likely
++ benefit from this, while larger CPUs will only derive a latency
++ benefit. If your workloads are primarily single threaded, this will
++ possibly worsen throughput. If you are only concerned about latency
++ then enable this regardless of how many cores you have.
++
++ This can still be enabled runtime with the boot parameter
++ rqshare=mc
++
++ If unsure, say Y.
++
++config RQ_SMP
++ bool "Symmetric Multi-Processing"
++ depends on SMP && SCHED_MUQSS
++ help
++ With this option enabled, the CPU scheduler will have one runqueue
++ shared by all physical CPUs unless they are on separate NUMA nodes.
++ As physical CPUs usually do not share resources, sharing the runqueue
++ will normally worsen throughput but improve latency. If you only
++ care about latency enable this.
++
++ This can still be enabled runtime with the boot parameter
++ rqshare=smp
++
++ If unsure, say N.
++endchoice
++
++config SHARERQ
++ int
++ default 0 if RQ_NONE
++ default 1 if RQ_SMT
++ default 2 if RQ_MC
++ default 3 if RQ_SMP
++
++
+ config UP_LATE_INIT
+ def_bool y
+ depends on !SMP && X86_LOCAL_APIC
+diff -Nur a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
+--- a/Documentation/admin-guide/kernel-parameters.txt 2019-02-09 17:20:30.451820228 +0000
++++ b/Documentation/admin-guide/kernel-parameters.txt 2019-02-09 17:46:11.981297222 +0000
+@@ -4003,6 +4003,14 @@
+ Memory area to be used by remote processor image,
+ managed by CMA.
+
++ rqshare= [X86] Select the MuQSS scheduler runqueue sharing type.
++ Format: <string>
++ smt -- Share SMT (hyperthread) sibling runqueues
++ mc -- Share MC (multicore) sibling runqueues
++ smp -- Share SMP runqueues
++ none -- So not share any runqueues
++ Default value is mc
++
+ rw [KNL] Mount root device read-write on boot
+
+ S [KNL] Run init in single mode
+diff -Nur a/Documentation/scheduler/sched-BFS.txt b/Documentation/scheduler/sched-BFS.txt
+--- a/Documentation/scheduler/sched-BFS.txt 1970-01-01 01:00:00.000000000 +0100
++++ b/Documentation/scheduler/sched-BFS.txt 2019-02-09 17:46:11.981297222 +0000
+@@ -0,0 +1,351 @@
++BFS - The Brain Fuck Scheduler by Con Kolivas.
++
++Goals.
++
++The goal of the Brain Fuck Scheduler, referred to as BFS from here on, is to
++completely do away with the complex designs of the past for the cpu process
++scheduler and instead implement one that is very simple in basic design.
++The main focus of BFS is to achieve excellent desktop interactivity and
++responsiveness without heuristics and tuning knobs that are difficult to
++understand, impossible to model and predict the effect of, and when tuned to
++one workload cause massive detriment to another.
++
++
++Design summary.
++
++BFS is best described as a single runqueue, O(n) lookup, earliest effective
++virtual deadline first design, loosely based on EEVDF (earliest eligible virtual
++deadline first) and my previous Staircase Deadline scheduler. Each component
++shall be described in order to understand the significance of, and reasoning for
++it. The codebase when the first stable version was released was approximately
++9000 lines less code than the existing mainline linux kernel scheduler (in
++2.6.31). This does not even take into account the removal of documentation and
++the cgroups code that is not used.
++
++Design reasoning.
++
++The single runqueue refers to the queued but not running processes for the
++entire system, regardless of the number of CPUs. The reason for going back to
++a single runqueue design is that once multiple runqueues are introduced,
++per-CPU or otherwise, there will be complex interactions as each runqueue will
++be responsible for the scheduling latency and fairness of the tasks only on its
++own runqueue, and to achieve fairness and low latency across multiple CPUs, any
++advantage in throughput of having CPU local tasks causes other disadvantages.
++This is due to requiring a very complex balancing system to at best achieve some
++semblance of fairness across CPUs and can only maintain relatively low latency
++for tasks bound to the same CPUs, not across them. To increase said fairness
++and latency across CPUs, the advantage of local runqueue locking, which makes
++for better scalability, is lost due to having to grab multiple locks.
++
++A significant feature of BFS is that all accounting is done purely based on CPU
++used and nowhere is sleep time used in any way to determine entitlement or
++interactivity. Interactivity "estimators" that use some kind of sleep/run
++algorithm are doomed to fail to detect all interactive tasks, and to falsely tag
++tasks that aren't interactive as being so. The reason for this is that it is
++close to impossible to determine that when a task is sleeping, whether it is
++doing it voluntarily, as in a userspace application waiting for input in the
++form of a mouse click or otherwise, or involuntarily, because it is waiting for
++another thread, process, I/O, kernel activity or whatever. Thus, such an
++estimator will introduce corner cases, and more heuristics will be required to
++cope with those corner cases, introducing more corner cases and failed
++interactivity detection and so on. Interactivity in BFS is built into the design
++by virtue of the fact that tasks that are waking up have not used up their quota
++of CPU time, and have earlier effective deadlines, thereby making it very likely
++they will preempt any CPU bound task of equivalent nice level. See below for
++more information on the virtual deadline mechanism. Even if they do not preempt
++a running task, because the rr interval is guaranteed to have a bound upper
++limit on how long a task will wait for, it will be scheduled within a timeframe
++that will not cause visible interface jitter.
++
++
++Design details.
++
++Task insertion.
++
++BFS inserts tasks into each relevant queue as an O(1) insertion into a double
++linked list. On insertion, *every* running queue is checked to see if the newly
++queued task can run on any idle queue, or preempt the lowest running task on the
++system. This is how the cross-CPU scheduling of BFS achieves significantly lower
++latency per extra CPU the system has. In this case the lookup is, in the worst
++case scenario, O(n) where n is the number of CPUs on the system.
++
++Data protection.
++
++BFS has one single lock protecting the process local data of every task in the
++global queue. Thus every insertion, removal and modification of task data in the
++global runqueue needs to grab the global lock. However, once a task is taken by
++a CPU, the CPU has its own local data copy of the running process' accounting
++information which only that CPU accesses and modifies (such as during a
++timer tick) thus allowing the accounting data to be updated lockless. Once a
++CPU has taken a task to run, it removes it from the global queue. Thus the
++global queue only ever has, at most,
++
++ (number of tasks requesting cpu time) - (number of logical CPUs) + 1
++
++tasks in the global queue. This value is relevant for the time taken to look up
++tasks during scheduling. This will increase if many tasks with CPU affinity set
++in their policy to limit which CPUs they're allowed to run on if they outnumber
++the number of CPUs. The +1 is because when rescheduling a task, the CPU's
++currently running task is put back on the queue. Lookup will be described after
++the virtual deadline mechanism is explained.
++
++Virtual deadline.
++
++The key to achieving low latency, scheduling fairness, and "nice level"
++distribution in BFS is entirely in the virtual deadline mechanism. The one
++tunable in BFS is the rr_interval, or "round robin interval". This is the
++maximum time two SCHED_OTHER (or SCHED_NORMAL, the common scheduling policy)
++tasks of the same nice level will be running for, or looking at it the other
++way around, the longest duration two tasks of the same nice level will be
++delayed for. When a task requests cpu time, it is given a quota (time_slice)
++equal to the rr_interval and a virtual deadline. The virtual deadline is
++offset from the current time in jiffies by this equation:
++
++ jiffies + (prio_ratio * rr_interval)
++
++The prio_ratio is determined as a ratio compared to the baseline of nice -20
++and increases by 10% per nice level. The deadline is a virtual one only in that
++no guarantee is placed that a task will actually be scheduled by this time, but
++it is used to compare which task should go next. There are three components to
++how a task is next chosen. First is time_slice expiration. If a task runs out
++of its time_slice, it is descheduled, the time_slice is refilled, and the
++deadline reset to that formula above. Second is sleep, where a task no longer
++is requesting CPU for whatever reason. The time_slice and deadline are _not_
++adjusted in this case and are just carried over for when the task is next
++scheduled. Third is preemption, and that is when a newly waking task is deemed
++higher priority than a currently running task on any cpu by virtue of the fact
++that it has an earlier virtual deadline than the currently running task. The
++earlier deadline is the key to which task is next chosen for the first and
++second cases. Once a task is descheduled, it is put back on the queue, and an
++O(n) lookup of all queued-but-not-running tasks is done to determine which has
++the earliest deadline and that task is chosen to receive CPU next.
++
++The CPU proportion of different nice tasks works out to be approximately the
++
++ (prio_ratio difference)^2
++
++The reason it is squared is that a task's deadline does not change while it is
++running unless it runs out of time_slice. Thus, even if the time actually
++passes the deadline of another task that is queued, it will not get CPU time
++unless the current running task deschedules, and the time "base" (jiffies) is
++constantly moving.
++
++Task lookup.
++
++BFS has 103 priority queues. 100 of these are dedicated to the static priority
++of realtime tasks, and the remaining 3 are, in order of best to worst priority,
++SCHED_ISO (isochronous), SCHED_NORMAL, and SCHED_IDLEPRIO (idle priority
++scheduling). When a task of these priorities is queued, a bitmap of running
++priorities is set showing which of these priorities has tasks waiting for CPU
++time. When a CPU is made to reschedule, the lookup for the next task to get
++CPU time is performed in the following way:
++
++First the bitmap is checked to see what static priority tasks are queued. If
++any realtime priorities are found, the corresponding queue is checked and the
++first task listed there is taken (provided CPU affinity is suitable) and lookup
++is complete. If the priority corresponds to a SCHED_ISO task, they are also
++taken in FIFO order (as they behave like SCHED_RR). If the priority corresponds
++to either SCHED_NORMAL or SCHED_IDLEPRIO, then the lookup becomes O(n). At this
++stage, every task in the runlist that corresponds to that priority is checked
++to see which has the earliest set deadline, and (provided it has suitable CPU
++affinity) it is taken off the runqueue and given the CPU. If a task has an
++expired deadline, it is taken and the rest of the lookup aborted (as they are
++chosen in FIFO order).
++
++Thus, the lookup is O(n) in the worst case only, where n is as described
++earlier, as tasks may be chosen before the whole task list is looked over.
++
++
++Scalability.
++
++The major limitations of BFS will be that of scalability, as the separate
++runqueue designs will have less lock contention as the number of CPUs rises.
++However they do not scale linearly even with separate runqueues as multiple
++runqueues will need to be locked concurrently on such designs to be able to
++achieve fair CPU balancing, to try and achieve some sort of nice-level fairness
++across CPUs, and to achieve low enough latency for tasks on a busy CPU when
++other CPUs would be more suited. BFS has the advantage that it requires no
++balancing algorithm whatsoever, as balancing occurs by proxy simply because
++all CPUs draw off the global runqueue, in priority and deadline order. Despite
++the fact that scalability is _not_ the prime concern of BFS, it both shows very
++good scalability to smaller numbers of CPUs and is likely a more scalable design
++at these numbers of CPUs.
++
++It also has some very low overhead scalability features built into the design
++when it has been deemed their overhead is so marginal that they're worth adding.
++The first is the local copy of the running process' data to the CPU it's running
++on to allow that data to be updated lockless where possible. Then there is
++deference paid to the last CPU a task was running on, by trying that CPU first
++when looking for an idle CPU to use the next time it's scheduled. Finally there
++is the notion of cache locality beyond the last running CPU. The sched_domains
++information is used to determine the relative virtual "cache distance" that
++other CPUs have from the last CPU a task was running on. CPUs with shared
++caches, such as SMT siblings, or multicore CPUs with shared caches, are treated
++as cache local. CPUs without shared caches are treated as not cache local, and
++CPUs on different NUMA nodes are treated as very distant. This "relative cache
++distance" is used by modifying the virtual deadline value when doing lookups.
++Effectively, the deadline is unaltered between "cache local" CPUs, doubled for
++"cache distant" CPUs, and quadrupled for "very distant" CPUs. The reasoning
++behind the doubling of deadlines is as follows. The real cost of migrating a
++task from one CPU to another is entirely dependant on the cache footprint of
++the task, how cache intensive the task is, how long it's been running on that
++CPU to take up the bulk of its cache, how big the CPU cache is, how fast and
++how layered the CPU cache is, how fast a context switch is... and so on. In
++other words, it's close to random in the real world where we do more than just
++one sole workload. The only thing we can be sure of is that it's not free. So
++BFS uses the principle that an idle CPU is a wasted CPU and utilising idle CPUs
++is more important than cache locality, and cache locality only plays a part
++after that. Doubling the effective deadline is based on the premise that the
++"cache local" CPUs will tend to work on the same tasks up to double the number
++of cache local CPUs, and once the workload is beyond that amount, it is likely
++that none of the tasks are cache warm anywhere anyway. The quadrupling for NUMA
++is a value I pulled out of my arse.
++
++When choosing an idle CPU for a waking task, the cache locality is determined
++according to where the task last ran and then idle CPUs are ranked from best
++to worst to choose the most suitable idle CPU based on cache locality, NUMA
++node locality and hyperthread sibling business. They are chosen in the
++following preference (if idle):
++
++* Same core, idle or busy cache, idle threads
++* Other core, same cache, idle or busy cache, idle threads.
++* Same node, other CPU, idle cache, idle threads.
++* Same node, other CPU, busy cache, idle threads.
++* Same core, busy threads.
++* Other core, same cache, busy threads.
++* Same node, other CPU, busy threads.
++* Other node, other CPU, idle cache, idle threads.
++* Other node, other CPU, busy cache, idle threads.
++* Other node, other CPU, busy threads.
++
++This shows the SMT or "hyperthread" awareness in the design as well which will
++choose a real idle core first before a logical SMT sibling which already has
++tasks on the physical CPU.
++
++Early benchmarking of BFS suggested scalability dropped off at the 16 CPU mark.
++However this benchmarking was performed on an earlier design that was far less
++scalable than the current one so it's hard to know how scalable it is in terms
++of both CPUs (due to the global runqueue) and heavily loaded machines (due to
++O(n) lookup) at this stage. Note that in terms of scalability, the number of
++_logical_ CPUs matters, not the number of _physical_ CPUs. Thus, a dual (2x)
++quad core (4X) hyperthreaded (2X) machine is effectively a 16X. Newer benchmark
++results are very promising indeed, without needing to tweak any knobs, features
++or options. Benchmark contributions are most welcome.
++
++
++Features
++
++As the initial prime target audience for BFS was the average desktop user, it
++was designed to not need tweaking, tuning or have features set to obtain benefit
++from it. Thus the number of knobs and features has been kept to an absolute
++minimum and should not require extra user input for the vast majority of cases.
++There are precisely 2 tunables, and 2 extra scheduling policies. The rr_interval
++and iso_cpu tunables, and the SCHED_ISO and SCHED_IDLEPRIO policies. In addition
++to this, BFS also uses sub-tick accounting. What BFS does _not_ now feature is
++support for CGROUPS. The average user should neither need to know what these
++are, nor should they need to be using them to have good desktop behaviour.
++
++rr_interval
++
++There is only one "scheduler" tunable, the round robin interval. This can be
++accessed in
++
++ /proc/sys/kernel/rr_interval
++
++The value is in milliseconds, and the default value is set to 6 on a
++uniprocessor machine, and automatically set to a progressively higher value on
++multiprocessor machines. The reasoning behind increasing the value on more CPUs
++is that the effective latency is decreased by virtue of there being more CPUs on
++BFS (for reasons explained above), and increasing the value allows for less
++cache contention and more throughput. Valid values are from 1 to 1000
++Decreasing the value will decrease latencies at the cost of decreasing
++throughput, while increasing it will improve throughput, but at the cost of
++worsening latencies. The accuracy of the rr interval is limited by HZ resolution
++of the kernel configuration. Thus, the worst case latencies are usually slightly
++higher than this actual value. The default value of 6 is not an arbitrary one.
++It is based on the fact that humans can detect jitter at approximately 7ms, so
++aiming for much lower latencies is pointless under most circumstances. It is
++worth noting this fact when comparing the latency performance of BFS to other
++schedulers. Worst case latencies being higher than 7ms are far worse than
++average latencies not being in the microsecond range.
++
++Isochronous scheduling.
++
++Isochronous scheduling is a unique scheduling policy designed to provide
++near-real-time performance to unprivileged (ie non-root) users without the
++ability to starve the machine indefinitely. Isochronous tasks (which means
++"same time") are set using, for example, the schedtool application like so:
++
++ schedtool -I -e amarok
++
++This will start the audio application "amarok" as SCHED_ISO. How SCHED_ISO works
++is that it has a priority level between true realtime tasks and SCHED_NORMAL
++which would allow them to preempt all normal tasks, in a SCHED_RR fashion (ie,
++if multiple SCHED_ISO tasks are running, they purely round robin at rr_interval
++rate). However if ISO tasks run for more than a tunable finite amount of time,
++they are then demoted back to SCHED_NORMAL scheduling. This finite amount of
++time is the percentage of _total CPU_ available across the machine, configurable
++as a percentage in the following "resource handling" tunable (as opposed to a
++scheduler tunable):
++
++ /proc/sys/kernel/iso_cpu
++
++and is set to 70% by default. It is calculated over a rolling 5 second average
++Because it is the total CPU available, it means that on a multi CPU machine, it
++is possible to have an ISO task running as realtime scheduling indefinitely on
++just one CPU, as the other CPUs will be available. Setting this to 100 is the
++equivalent of giving all users SCHED_RR access and setting it to 0 removes the
++ability to run any pseudo-realtime tasks.
++
++A feature of BFS is that it detects when an application tries to obtain a
++realtime policy (SCHED_RR or SCHED_FIFO) and the caller does not have the
++appropriate privileges to use those policies. When it detects this, it will
++give the task SCHED_ISO policy instead. Thus it is transparent to the user.
++Because some applications constantly set their policy as well as their nice
++level, there is potential for them to undo the override specified by the user
++on the command line of setting the policy to SCHED_ISO. To counter this, once
++a task has been set to SCHED_ISO policy, it needs superuser privileges to set
++it back to SCHED_NORMAL. This will ensure the task remains ISO and all child
++processes and threads will also inherit the ISO policy.
++
++Idleprio scheduling.
++
++Idleprio scheduling is a scheduling policy designed to give out CPU to a task
++_only_ when the CPU would be otherwise idle. The idea behind this is to allow
++ultra low priority tasks to be run in the background that have virtually no
++effect on the foreground tasks. This is ideally suited to distributed computing
++clients (like setiathome, folding, mprime etc) but can also be used to start
++a video encode or so on without any slowdown of other tasks. To avoid this
++policy from grabbing shared resources and holding them indefinitely, if it
++detects a state where the task is waiting on I/O, the machine is about to
++suspend to ram and so on, it will transiently schedule them as SCHED_NORMAL. As
++per the Isochronous task management, once a task has been scheduled as IDLEPRIO,
++it cannot be put back to SCHED_NORMAL without superuser privileges. Tasks can
++be set to start as SCHED_IDLEPRIO with the schedtool command like so:
++
++ schedtool -D -e ./mprime
++
++Subtick accounting.
++
++It is surprisingly difficult to get accurate CPU accounting, and in many cases,
++the accounting is done by simply determining what is happening at the precise
++moment a timer tick fires off. This becomes increasingly inaccurate as the
++timer tick frequency (HZ) is lowered. It is possible to create an application
++which uses almost 100% CPU, yet by being descheduled at the right time, records
++zero CPU usage. While the main problem with this is that there are possible
++security implications, it is also difficult to determine how much CPU a task
++really does use. BFS tries to use the sub-tick accounting from the TSC clock,
++where possible, to determine real CPU usage. This is not entirely reliable, but
++is far more likely to produce accurate CPU usage data than the existing designs
++and will not show tasks as consuming no CPU usage when they actually are. Thus,
++the amount of CPU reported as being used by BFS will more accurately represent
++how much CPU the task itself is using (as is shown for example by the 'time'
++application), so the reported values may be quite different to other schedulers.
++Values reported as the 'load' are more prone to problems with this design, but
++per process values are closer to real usage. When comparing throughput of BFS
++to other designs, it is important to compare the actual completed work in terms
++of total wall clock time taken and total work done, rather than the reported
++"cpu usage".
++
++
++Con Kolivas <kernel@kolivas.org> Fri Aug 27 2010
+diff -Nur a/Documentation/scheduler/sched-MuQSS.txt b/Documentation/scheduler/sched-MuQSS.txt
+--- a/Documentation/scheduler/sched-MuQSS.txt 1970-01-01 01:00:00.000000000 +0100
++++ b/Documentation/scheduler/sched-MuQSS.txt 2019-02-09 17:46:11.991297545 +0000
+@@ -0,0 +1,373 @@
++MuQSS - The Multiple Queue Skiplist Scheduler by Con Kolivas.
++
++MuQSS is a per-cpu runqueue variant of the original BFS scheduler with
++one 8 level skiplist per runqueue, and fine grained locking for much more
++scalability.
++
++
++Goals.
++
++The goal of the Multiple Queue Skiplist Scheduler, referred to as MuQSS from
++here on (pronounced mux) is to completely do away with the complex designs of
++the past for the cpu process scheduler and instead implement one that is very
++simple in basic design. The main focus of MuQSS is to achieve excellent desktop
++interactivity and responsiveness without heuristics and tuning knobs that are
++difficult to understand, impossible to model and predict the effect of, and when
++tuned to one workload cause massive detriment to another, while still being
++scalable to many CPUs and processes.
++
++
++Design summary.
++
++MuQSS is best described as per-cpu multiple runqueue, O(log n) insertion, O(1)
++lookup, earliest effective virtual deadline first tickless design, loosely based
++on EEVDF (earliest eligible virtual deadline first) and my previous Staircase
++Deadline scheduler, and evolved from the single runqueue O(n) BFS scheduler.
++Each component shall be described in order to understand the significance of,
++and reasoning for it.
++
++
++Design reasoning.
++
++In BFS, the use of a single runqueue across all CPUs meant that each CPU would
++need to scan the entire runqueue looking for the process with the earliest
++deadline and schedule that next, regardless of which CPU it originally came
++from. This made BFS deterministic with respect to latency and provided
++guaranteed latencies dependent on number of processes and CPUs. The single
++runqueue, however, meant that all CPUs would compete for the single lock
++protecting it, which would lead to increasing lock contention as the number of
++CPUs rose and appeared to limit scalability of common workloads beyond 16
++logical CPUs. Additionally, the O(n) lookup of the runqueue list obviously
++increased overhead proportionate to the number of queued proecesses and led to
++cache thrashing while iterating over the linked list.
++
++MuQSS is an evolution of BFS, designed to maintain the same scheduling
++decision mechanism and be virtually deterministic without relying on the
++constrained design of the single runqueue by splitting out the single runqueue
++to be per-CPU and use skiplists instead of linked lists.
++
++The original reason for going back to a single runqueue design for BFS was that
++once multiple runqueues are introduced, per-CPU or otherwise, there will be
++complex interactions as each runqueue will be responsible for the scheduling
++latency and fairness of the tasks only on its own runqueue, and to achieve
++fairness and low latency across multiple CPUs, any advantage in throughput of
++having CPU local tasks causes other disadvantages. This is due to requiring a
++very complex balancing system to at best achieve some semblance of fairness
++across CPUs and can only maintain relatively low latency for tasks bound to the
++same CPUs, not across them. To increase said fairness and latency across CPUs,
++the advantage of local runqueue locking, which makes for better scalability, is
++lost due to having to grab multiple locks.
++
++MuQSS works around the problems inherent in multiple runqueue designs by
++making its skip lists priority ordered and through novel use of lockless
++examination of each other runqueue it can decide if it should take the earliest
++deadline task from another runqueue for latency reasons, or for CPU balancing
++reasons. It still does not have a balancing system, choosing to allow the
++next task scheduling decision and task wakeup CPU choice to allow balancing to
++happen by virtue of its choices.
++
++As a further evolution of the design, MuQSS normally configures sharing of
++runqueues in a logical fashion for when CPU resources are shared for improved
++latency and throughput. By default it shares runqueues and locks between
++multicore siblings. Optionally it can be configured to run with sharing of
++SMT siblings only, all SMP packages or no sharing at all. Additionally it can
++be selected at boot time.
++
++
++Design details.
++
++Custom skip list implementation:
++
++To avoid the overhead of building up and tearing down skip list structures,
++the variant used by MuQSS has a number of optimisations making it specific for
++its use case in the scheduler. It uses static arrays of 8 'levels' instead of
++building up and tearing down structures dynamically. This makes each runqueue
++only scale O(log N) up to 64k tasks. However as there is one runqueue per CPU
++it means that it scales O(log N) up to 64k x number of logical CPUs which is
++far beyond the realistic task limits each CPU could handle. By being 8 levels
++it also makes the array exactly one cacheline in size. Additionally, each
++skip list node is bidirectional making insertion and removal amortised O(1),
++being O(k) where k is 1-8. Uniquely, we are only ever interested in the very
++first entry in each list at all times with MuQSS, so there is never a need to
++do a search and thus look up is always O(1). In interactive mode, the queues
++will be searched beyond their first entry if the first task is not suitable
++for affinity or SMT nice reasons.
++
++Task insertion:
++
++MuQSS inserts tasks into a per CPU runqueue as an O(log N) insertion into
++a custom skip list as described above (based on the original design by William
++Pugh). Insertion is ordered in such a way that there is never a need to do a
++search by ordering tasks according to static priority primarily, and then
++virtual deadline at the time of insertion.
++
++Niffies:
++
++Niffies are a monotonic forward moving timer not unlike the "jiffies" but are
++of nanosecond resolution. Niffies are calculated per-runqueue from the high
++resolution TSC timers, and in order to maintain fairness are synchronised
++between CPUs whenever both runqueues are locked concurrently.
++
++Virtual deadline:
++
++The key to achieving low latency, scheduling fairness, and "nice level"
++distribution in MuQSS is entirely in the virtual deadline mechanism. The one
++tunable in MuQSS is the rr_interval, or "round robin interval". This is the
++maximum time two SCHED_OTHER (or SCHED_NORMAL, the common scheduling policy)
++tasks of the same nice level will be running for, or looking at it the other
++way around, the longest duration two tasks of the same nice level will be
++delayed for. When a task requests cpu time, it is given a quota (time_slice)
++equal to the rr_interval and a virtual deadline. The virtual deadline is
++offset from the current time in niffies by this equation:
++
++ niffies + (prio_ratio * rr_interval)
++
++The prio_ratio is determined as a ratio compared to the baseline of nice -20
++and increases by 10% per nice level. The deadline is a virtual one only in that
++no guarantee is placed that a task will actually be scheduled by this time, but
++it is used to compare which task should go next. There are three components to
++how a task is next chosen. First is time_slice expiration. If a task runs out
++of its time_slice, it is descheduled, the time_slice is refilled, and the
++deadline reset to that formula above. Second is sleep, where a task no longer
++is requesting CPU for whatever reason. The time_slice and deadline are _not_
++adjusted in this case and are just carried over for when the task is next
++scheduled. Third is preemption, and that is when a newly waking task is deemed
++higher priority than a currently running task on any cpu by virtue of the fact
++that it has an earlier virtual deadline than the currently running task. The
++earlier deadline is the key to which task is next chosen for the first and
++second cases.
++
++The CPU proportion of different nice tasks works out to be approximately the
++
++ (prio_ratio difference)^2
++
++The reason it is squared is that a task's deadline does not change while it is
++running unless it runs out of time_slice. Thus, even if the time actually
++passes the deadline of another task that is queued, it will not get CPU time
++unless the current running task deschedules, and the time "base" (niffies) is
++constantly moving.
++
++Task lookup:
++
++As tasks are already pre-ordered according to anticipated scheduling order in
++the skip lists, lookup for the next suitable task per-runqueue is always a
++matter of simply selecting the first task in the 0th level skip list entry.
++In order to maintain optimal latency and fairness across CPUs, MuQSS does a
++novel examination of every other runqueue in cache locality order, choosing the
++best task across all runqueues. This provides near-determinism of how long any
++task across the entire system may wait before receiving CPU time. The other
++runqueues are first examine lockless and then trylocked to minimise the
++potential lock contention if they are likely to have a suitable better task.
++Each other runqueue lock is only held for as long as it takes to examine the
++entry for suitability. In "interactive" mode, the default setting, MuQSS will
++look for the best deadline task across all CPUs, while in !interactive mode,
++it will only select a better deadline task from another CPU if it is more
++heavily laden than the current one.
++
++Lookup is therefore O(k) where k is number of CPUs.
++
++
++Latency.
++
++Through the use of virtual deadlines to govern the scheduling order of normal
++tasks, queue-to-activation latency per runqueue is guaranteed to be bound by
++the rr_interval tunable which is set to 6ms by default. This means that the
++longest a CPU bound task will wait for more CPU is proportional to the number
++of running tasks and in the common case of 0-2 running tasks per CPU, will be
++under the 7ms threshold for human perception of jitter. Additionally, as newly
++woken tasks will have an early deadline from their previous runtime, the very
++tasks that are usually latency sensitive will have the shortest interval for
++activation, usually preempting any existing CPU bound tasks.
++
++Tickless expiry:
++
++A feature of MuQSS is that it is not tied to the resolution of the chosen tick
++rate in Hz, instead depending entirely on the high resolution timers where
++possible for sub-millisecond accuracy on timeouts regarless of the underlying
++tick rate. This allows MuQSS to be run with the low overhead of low Hz rates
++such as 100 by default, benefiting from the improved throughput and lower
++power usage it provides. Another advantage of this approach is that in
++combination with the Full No HZ option, which disables ticks on running task
++CPUs instead of just idle CPUs, the tick can be disabled at all times
++regardless of how many tasks are running instead of being limited to just one
++running task. Note that this option is NOT recommended for regular desktop
++users.
++
++
++Scalability and balancing.
++
++Unlike traditional approaches where balancing is a combination of CPU selection
++at task wakeup and intermittent balancing based on a vast array of rules set
++according to architecture, busyness calculations and special case management,
++MuQSS indirectly balances on the fly at task wakeup and next task selection.
++During initialisation, MuQSS creates a cache coherency ordered list of CPUs for
++each logical CPU and uses this to aid task/CPU selection when CPUs are busy.
++Additionally it selects any idle CPUs, if they are available, at any time over
++busy CPUs according to the following preference:
++
++ * Same thread, idle or busy cache, idle or busy threads
++ * Other core, same cache, idle or busy cache, idle threads.
++ * Same node, other CPU, idle cache, idle threads.
++ * Same node, other CPU, busy cache, idle threads.
++ * Other core, same cache, busy threads.
++ * Same node, other CPU, busy threads.
++ * Other node, other CPU, idle cache, idle threads.
++ * Other node, other CPU, busy cache, idle threads.
++ * Other node, other CPU, busy threads.
++
++Mux is therefore SMT, MC and Numa aware without the need for extra
++intermittent balancing to maintain CPUs busy and make the most of cache
++coherency.
++
++
++Features
++
++As the initial prime target audience for MuQSS was the average desktop user, it
++was designed to not need tweaking, tuning or have features set to obtain benefit
++from it. Thus the number of knobs and features has been kept to an absolute
++minimum and should not require extra user input for the vast majority of cases.
++There are 3 optional tunables, and 2 extra scheduling policies. The rr_interval,
++interactive, and iso_cpu tunables, and the SCHED_ISO and SCHED_IDLEPRIO
++policies. In addition to this, MuQSS also uses sub-tick accounting. What MuQSS
++does _not_ now feature is support for CGROUPS. The average user should neither
++need to know what these are, nor should they need to be using them to have good
++desktop behaviour. However since some applications refuse to work without
++cgroups, one can enable them with MuQSS as a stub and the filesystem will be
++created which will allow the applications to work.
++
++rr_interval:
++
++ /proc/sys/kernel/rr_interval
++
++The value is in milliseconds, and the default value is set to 6. Valid values
++are from 1 to 1000 Decreasing the value will decrease latencies at the cost of
++decreasing throughput, while increasing it will improve throughput, but at the
++cost of worsening latencies. It is based on the fact that humans can detect
++jitter at approximately 7ms, so aiming for much lower latencies is pointless
++under most circumstances. It is worth noting this fact when comparing the
++latency performance of MuQSS to other schedulers. Worst case latencies being
++higher than 7ms are far worse than average latencies not being in the
++microsecond range.
++
++interactive:
++
++ /proc/sys/kernel/interactive
++
++The value is a simple boolean of 1 for on and 0 for off and is set to on by
++default. Disabling this will disable the near-determinism of MuQSS when
++selecting the next task by not examining all CPUs for the earliest deadline
++task, or which CPU to wake to, instead prioritising CPU balancing for improved
++throughput. Latency will still be bound by rr_interval, but on a per-CPU basis
++instead of across the whole system.
++
++Runqueue sharing.
++
++By default MuQSS chooses to share runqueue resources (specifically the skip
++list and locking) between multicore siblings. It is configurable at build time
++to select between None, SMT, MC and SMP, corresponding to no sharing, sharing
++only between simultaneous mulithreading siblings, multicore siblings, or
++symmetric multiprocessing physical packages. Additionally it can be se at
++bootime with the use of the rqshare parameter. The reason for configurability
++is that some architectures have CPUs with many multicore siblings (>= 16)
++where it may be detrimental to throughput to share runqueues and another
++sharing option may be desirable. Additionally, more sharing than usual can
++improve latency on a system-wide level at the expense of throughput if desired.
++
++The options are:
++none, smt, mc, smp
++
++eg:
++ rqshare=mc
++
++Isochronous scheduling:
++
++Isochronous scheduling is a unique scheduling policy designed to provide
++near-real-time performance to unprivileged (ie non-root) users without the
++ability to starve the machine indefinitely. Isochronous tasks (which means
++"same time") are set using, for example, the schedtool application like so:
++
++ schedtool -I -e amarok
++
++This will start the audio application "amarok" as SCHED_ISO. How SCHED_ISO works
++is that it has a priority level between true realtime tasks and SCHED_NORMAL
++which would allow them to preempt all normal tasks, in a SCHED_RR fashion (ie,
++if multiple SCHED_ISO tasks are running, they purely round robin at rr_interval
++rate). However if ISO tasks run for more than a tunable finite amount of time,
++they are then demoted back to SCHED_NORMAL scheduling. This finite amount of
++time is the percentage of CPU available per CPU, configurable as a percentage in
++the following "resource handling" tunable (as opposed to a scheduler tunable):
++
++iso_cpu:
++
++ /proc/sys/kernel/iso_cpu
++
++and is set to 70% by default. It is calculated over a rolling 5 second average
++Because it is the total CPU available, it means that on a multi CPU machine, it
++is possible to have an ISO task running as realtime scheduling indefinitely on
++just one CPU, as the other CPUs will be available. Setting this to 100 is the
++equivalent of giving all users SCHED_RR access and setting it to 0 removes the
++ability to run any pseudo-realtime tasks.
++
++A feature of MuQSS is that it detects when an application tries to obtain a
++realtime policy (SCHED_RR or SCHED_FIFO) and the caller does not have the
++appropriate privileges to use those policies. When it detects this, it will
++give the task SCHED_ISO policy instead. Thus it is transparent to the user.
++
++
++Idleprio scheduling:
++
++Idleprio scheduling is a scheduling policy designed to give out CPU to a task
++_only_ when the CPU would be otherwise idle. The idea behind this is to allow
++ultra low priority tasks to be run in the background that have virtually no
++effect on the foreground tasks. This is ideally suited to distributed computing
++clients (like setiathome, folding, mprime etc) but can also be used to start a
++video encode or so on without any slowdown of other tasks. To avoid this policy
++from grabbing shared resources and holding them indefinitely, if it detects a
++state where the task is waiting on I/O, the machine is about to suspend to ram
++and so on, it will transiently schedule them as SCHED_NORMAL. Once a task has
++been scheduled as IDLEPRIO, it cannot be put back to SCHED_NORMAL without
++superuser privileges since it is effectively a lower scheduling policy. Tasks
++can be set to start as SCHED_IDLEPRIO with the schedtool command like so:
++
++schedtool -D -e ./mprime
++
++Subtick accounting:
++
++It is surprisingly difficult to get accurate CPU accounting, and in many cases,
++the accounting is done by simply determining what is happening at the precise
++moment a timer tick fires off. This becomes increasingly inaccurate as the timer
++tick frequency (HZ) is lowered. It is possible to create an application which
++uses almost 100% CPU, yet by being descheduled at the right time, records zero
++CPU usage. While the main problem with this is that there are possible security
++implications, it is also difficult to determine how much CPU a task really does
++use. Mux uses sub-tick accounting from the TSC clock to determine real CPU
++usage. Thus, the amount of CPU reported as being used by MuQSS will more
++accurately represent how much CPU the task itself is using (as is shown for
++example by the 'time' application), so the reported values may be quite
++different to other schedulers. When comparing throughput of MuQSS to other
++designs, it is important to compare the actual completed work in terms of total
++wall clock time taken and total work done, rather than the reported "cpu usage".
++
++Symmetric MultiThreading (SMT) aware nice:
++
++SMT, a.k.a. hyperthreading, is a very common feature on modern CPUs. While the
++logical CPU count rises by adding thread units to each CPU core, allowing more
++than one task to be run simultaneously on the same core, the disadvantage of it
++is that the CPU power is shared between the tasks, not summating to the power
++of two CPUs. The practical upshot of this is that two tasks running on
++separate threads of the same core run significantly slower than if they had one
++core each to run on. While smart CPU selection allows each task to have a core
++to itself whenever available (as is done on MuQSS), it cannot offset the
++slowdown that occurs when the cores are all loaded and only a thread is left.
++Most of the time this is harmless as the CPU is effectively overloaded at this
++point and the extra thread is of benefit. However when running a niced task in
++the presence of an un-niced task (say nice 19 v nice 0), the nice task gets
++precisely the same amount of CPU power as the unniced one. MuQSS has an
++optional configuration feature known as SMT-NICE which selectively idles the
++secondary niced thread for a period proportional to the nice difference,
++allowing CPU distribution according to nice level to be maintained, at the
++expense of a small amount of extra overhead. If this is configured in on a
++machine without SMT threads, the overhead is minimal.
++
++
++Con Kolivas <kernel@kolivas.org> Sat, 29th October 2016
+diff -Nur a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
+--- a/Documentation/sysctl/kernel.txt 2019-02-09 17:20:30.451820228 +0000
++++ b/Documentation/sysctl/kernel.txt 2019-02-09 17:46:11.991297545 +0000
+@@ -41,6 +41,7 @@
+ - hung_task_check_interval_secs
+ - hung_task_warnings
+ - hyperv_record_panic_msg
++- iso_cpu
+ - kexec_load_disabled
+ - kptr_restrict
+ - l2cr [ PPC only ]
+@@ -76,6 +77,7 @@
+ - randomize_va_space
+ - real-root-dev ==> Documentation/admin-guide/initrd.rst
+ - reboot-cmd [ SPARC only ]
++- rr_interval
+ - rtsig-max
+ - rtsig-nr
+ - seccomp/ ==> Documentation/userspace-api/seccomp_filter.rst
+@@ -98,6 +100,7 @@
+ - unknown_nmi_panic
+ - watchdog
+ - watchdog_thresh
++- yield_type
+ - version
+
+ ==============================================================
+@@ -436,6 +439,16 @@
+
+ ==============================================================
+
++iso_cpu: (MuQSS CPU scheduler only).
++
++This sets the percentage cpu that the unprivileged SCHED_ISO tasks can
++run effectively at realtime priority, averaged over a rolling five
++seconds over the -whole- system, meaning all cpus.
++
++Set to 70 (percent) by default.
++
++==============================================================
++
+ l2cr: (PPC only)
+
+ This flag controls the L2 cache of G3 processor boards. If
+@@ -863,6 +876,20 @@
+
+ ==============================================================
+
++rr_interval: (MuQSS CPU scheduler only)
++
++This is the smallest duration that any cpu process scheduling unit
++will run for. Increasing this value can increase throughput of cpu
++bound tasks substantially but at the expense of increased latencies
++overall. Conversely decreasing it will decrease average and maximum
++latencies but at the expense of throughput. This value is in
++milliseconds and the default value chosen depends on the number of
++cpus available at scheduler initialisation with a minimum of 6.
++
++Valid values are from 1-1000.
++
++==============================================================
++
+ rtsig-max & rtsig-nr:
+
+ The file rtsig-max can be used to tune the maximum number
+@@ -1123,3 +1150,13 @@
+ tunable to zero will disable lockup detection altogether.
+
+ ==============================================================
++
++yield_type: (MuQSS CPU scheduler only)
++
++This determines what type of yield calls to sched_yield will perform.
++
++ 0: No yield.
++ 1: Yield only to better priority/deadline tasks. (default)
++ 2: Expire timeslice and recalculate deadline.
++
++==============================================================
+diff -Nur a/fs/proc/base.c b/fs/proc/base.c
+--- a/fs/proc/base.c 2019-02-06 16:30:16.000000000 +0000
++++ b/fs/proc/base.c 2019-02-09 17:46:11.991297545 +0000
+@@ -459,7 +459,7 @@
+ seq_printf(m, "0 0 0\n");
+ else
+ seq_printf(m, "%llu %llu %lu\n",
+- (unsigned long long)task->se.sum_exec_runtime,
++ (unsigned long long)tsk_seruntime(task),
+ (unsigned long long)task->sched_info.run_delay,
+ task->sched_info.pcount);
+
+diff -Nur a/include/linux/init_task.h b/include/linux/init_task.h
+--- a/include/linux/init_task.h 2019-02-06 16:30:16.000000000 +0000
++++ b/include/linux/init_task.h 2019-02-09 17:46:11.991297545 +0000
+@@ -46,7 +46,11 @@
+ #define INIT_CPU_TIMERS(s)
+ #endif
+
++#ifdef CONFIG_SCHED_MUQSS
++#define INIT_TASK_COMM "MuQSS"
++#else
+ #define INIT_TASK_COMM "swapper"
++#endif
+
+ /* Attach to the init_task data structure for proper alignment */
+ #ifdef CONFIG_ARCH_TASK_STRUCT_ON_STACK
+diff -Nur a/include/linux/ioprio.h b/include/linux/ioprio.h
+--- a/include/linux/ioprio.h 2019-02-06 16:30:16.000000000 +0000
++++ b/include/linux/ioprio.h 2019-02-09 17:46:11.991297545 +0000
+@@ -53,6 +53,8 @@
+ */
+ static inline int task_nice_ioprio(struct task_struct *task)
+ {
++ if (iso_task(task))
++ return 0;
+ return (task_nice(task) + 20) / 5;
+ }
+
+diff -Nur a/include/linux/sched/nohz.h b/include/linux/sched/nohz.h
+--- a/include/linux/sched/nohz.h 2019-02-06 16:30:16.000000000 +0000
++++ b/include/linux/sched/nohz.h 2019-02-09 17:46:11.991297545 +0000
+@@ -6,7 +6,7 @@
+ * This is the interface between the scheduler and nohz/dynticks:
+ */
+
+-#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON)
++#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON) && !defined(CONFIG_SCHED_MUQSS)
+ extern void cpu_load_update_nohz_start(void);
+ extern void cpu_load_update_nohz_stop(void);
+ #else
+@@ -21,7 +21,7 @@
+ static inline void nohz_balance_enter_idle(int cpu) { }
+ #endif
+
+-#ifdef CONFIG_NO_HZ_COMMON
++#if defined(CONFIG_NO_HZ_COMMON) && !defined(CONFIG_SCHED_MUQSS)
+ void calc_load_nohz_start(void);
+ void calc_load_nohz_stop(void);
+ #else
+diff -Nur a/include/linux/sched/prio.h b/include/linux/sched/prio.h
+--- a/include/linux/sched/prio.h 2019-02-06 16:30:16.000000000 +0000
++++ b/include/linux/sched/prio.h 2019-02-09 17:46:11.991297545 +0000
+@@ -20,8 +20,20 @@
+ */
+
+ #define MAX_USER_RT_PRIO 100
++
++#ifdef CONFIG_SCHED_MUQSS
++/* Note different MAX_RT_PRIO */
++#define MAX_RT_PRIO (MAX_USER_RT_PRIO + 1)
++
++#define ISO_PRIO (MAX_RT_PRIO)
++#define NORMAL_PRIO (MAX_RT_PRIO + 1)
++#define IDLE_PRIO (MAX_RT_PRIO + 2)
++#define PRIO_LIMIT ((IDLE_PRIO) + 1)
++#else /* CONFIG_SCHED_MUQSS */
+ #define MAX_RT_PRIO MAX_USER_RT_PRIO
+
++#endif /* CONFIG_SCHED_MUQSS */
++
+ #define MAX_PRIO (MAX_RT_PRIO + NICE_WIDTH)
+ #define DEFAULT_PRIO (MAX_RT_PRIO + NICE_WIDTH / 2)
+
+diff -Nur a/include/linux/sched/rt.h b/include/linux/sched/rt.h
+--- a/include/linux/sched/rt.h 2019-02-06 16:30:16.000000000 +0000
++++ b/include/linux/sched/rt.h 2019-02-09 17:46:11.991297545 +0000
+@@ -24,8 +24,10 @@
+
+ if (policy == SCHED_FIFO || policy == SCHED_RR)
+ return true;
++#ifndef CONFIG_SCHED_MUQSS
+ if (policy == SCHED_DEADLINE)
+ return true;
++#endif
+ return false;
+ }
+
+diff -Nur a/include/linux/sched/task.h b/include/linux/sched/task.h
+--- a/include/linux/sched/task.h 2019-02-06 16:30:16.000000000 +0000
++++ b/include/linux/sched/task.h 2019-02-09 17:46:11.991297545 +0000
+@@ -80,7 +80,7 @@
+ extern void free_task(struct task_struct *tsk);
+
+ /* sched_exec is called by processes performing an exec */
+-#ifdef CONFIG_SMP
++#if defined(CONFIG_SMP) && !defined(CONFIG_SCHED_MUQSS)
+ extern void sched_exec(void);
+ #else
+ #define sched_exec() {}
+diff -Nur a/include/linux/sched.h b/include/linux/sched.h
+--- a/include/linux/sched.h 2019-02-06 16:30:16.000000000 +0000
++++ b/include/linux/sched.h 2019-02-09 17:46:11.991297545 +0000
+@@ -28,6 +28,9 @@
+ #include <linux/mm_types_task.h>
+ #include <linux/task_io_accounting.h>
+ #include <linux/rseq.h>
++#ifdef CONFIG_SCHED_MUQSS
++#include <linux/skip_list.h>
++#endif
+
+ /* task_struct member predeclarations (sorted alphabetically): */
+ struct audit_context;
+@@ -613,9 +616,11 @@
+ unsigned int flags;
+ unsigned int ptrace;
+
++#if defined(CONFIG_SMP) || defined(CONFIG_SCHED_MUQSS)
++ int on_cpu;
++#endif
+ #ifdef CONFIG_SMP
+ struct llist_node wake_entry;
+- int on_cpu;
+ #ifdef CONFIG_THREAD_INFO_IN_TASK
+ /* Current CPU: */
+ unsigned int cpu;
+@@ -640,10 +645,25 @@
+ int static_prio;
+ int normal_prio;
+ unsigned int rt_priority;
++#ifdef CONFIG_SCHED_MUQSS
++ int time_slice;
++ u64 deadline;
++ skiplist_node node; /* Skip list node */
++ u64 last_ran;
++ u64 sched_time; /* sched_clock time spent running */
++#ifdef CONFIG_SMT_NICE
++ int smt_bias; /* Policy/nice level bias across smt siblings */
++#endif
++#ifdef CONFIG_HOTPLUG_CPU
++ bool zerobound; /* Bound to CPU0 for hotplug */
++#endif
++ unsigned long rt_timeout;
++#else /* CONFIG_SCHED_MUQSS */
+
+ const struct sched_class *sched_class;
+ struct sched_entity se;
+ struct sched_rt_entity rt;
++#endif
+ #ifdef CONFIG_CGROUP_SCHED
+ struct task_group *sched_task_group;
+ #endif
+@@ -798,6 +818,10 @@
+ u64 utimescaled;
+ u64 stimescaled;
+ #endif
++#ifdef CONFIG_SCHED_MUQSS
++ /* Unbanked cpu time */
++ unsigned long utime_ns, stime_ns;
++#endif
+ u64 gtime;
+ struct prev_cputime prev_cputime;
+ #ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
+@@ -1210,6 +1234,40 @@
+ */
+ };
+
++#ifdef CONFIG_SCHED_MUQSS
++#define tsk_seruntime(t) ((t)->sched_time)
++#define tsk_rttimeout(t) ((t)->rt_timeout)
++
++static inline void tsk_cpus_current(struct task_struct *p)
++{
++}
++
++void print_scheduler_version(void);
++
++static inline bool iso_task(struct task_struct *p)
++{
++ return (p->policy == SCHED_ISO);
++}
++#else /* CFS */
++#define tsk_seruntime(t) ((t)->se.sum_exec_runtime)
++#define tsk_rttimeout(t) ((t)->rt.timeout)
++
++static inline void tsk_cpus_current(struct task_struct *p)
++{
++ p->nr_cpus_allowed = current->nr_cpus_allowed;
++}
++
++static inline void print_scheduler_version(void)
++{
++ printk(KERN_INFO "CFS CPU scheduler.\n");
++}
++
++static inline bool iso_task(struct task_struct *p)
++{
++ return false;
++}
++#endif /* CONFIG_SCHED_MUQSS */
++
+ static inline struct pid *task_pid(struct task_struct *task)
+ {
+ return task->thread_pid;
+diff -Nur a/include/linux/skip_list.h b/include/linux/skip_list.h
+--- a/include/linux/skip_list.h 1970-01-01 01:00:00.000000000 +0100
++++ b/include/linux/skip_list.h 2019-02-09 17:46:11.991297545 +0000
+@@ -0,0 +1,33 @@
++#ifndef _LINUX_SKIP_LISTS_H
++#define _LINUX_SKIP_LISTS_H
++typedef u64 keyType;
++typedef void *valueType;
++
++typedef struct nodeStructure skiplist_node;
++
++struct nodeStructure {
++ int level; /* Levels in this structure */
++ keyType key;
++ valueType value;
++ skiplist_node *next[8];
++ skiplist_node *prev[8];
++};
++
++typedef struct listStructure {
++ int entries;
++ int level; /* Maximum level of the list
++ (1 more than the number of levels in the list) */
++ skiplist_node *header; /* pointer to header */
++} skiplist;
++
++void skiplist_init(skiplist_node *slnode);
++skiplist *new_skiplist(skiplist_node *slnode);
++void free_skiplist(skiplist *l);
++void skiplist_node_init(skiplist_node *node);
++void skiplist_insert(skiplist *l, skiplist_node *node, keyType key, valueType value, unsigned int randseed);
++void skiplist_delete(skiplist *l, skiplist_node *node);
++
++static inline bool skiplist_node_empty(skiplist_node *node) {
++ return (!node->next[0]);
++}
++#endif /* _LINUX_SKIP_LISTS_H */
+diff -Nur a/include/uapi/linux/sched.h b/include/uapi/linux/sched.h
+--- a/include/uapi/linux/sched.h 2019-02-06 16:30:16.000000000 +0000
++++ b/include/uapi/linux/sched.h 2019-02-09 17:46:11.991297545 +0000
+@@ -37,9 +37,16 @@
+ #define SCHED_FIFO 1
+ #define SCHED_RR 2
+ #define SCHED_BATCH 3
+-/* SCHED_ISO: reserved but not implemented yet */
++/* SCHED_ISO: Implemented on MuQSS only */
+ #define SCHED_IDLE 5
++#ifdef CONFIG_SCHED_MUQSS
++#define SCHED_ISO 4
++#define SCHED_IDLEPRIO SCHED_IDLE
++#define SCHED_MAX (SCHED_IDLEPRIO)
++#define SCHED_RANGE(policy) ((policy) <= SCHED_MAX)
++#else /* CONFIG_SCHED_MUQSS */
+ #define SCHED_DEADLINE 6
++#endif /* CONFIG_SCHED_MUQSS */
+
+ /* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
+ #define SCHED_RESET_ON_FORK 0x40000000
+diff -Nur a/init/init_task.c b/init/init_task.c
+--- a/init/init_task.c 2019-02-06 16:30:16.000000000 +0000
++++ b/init/init_task.c 2019-02-09 17:46:11.991297545 +0000
+@@ -67,9 +67,17 @@
+ .stack = init_stack,
+ .usage = ATOMIC_INIT(2),
+ .flags = PF_KTHREAD,
++#ifdef CONFIG_SCHED_MUQSS
++ .prio = NORMAL_PRIO,
++ .static_prio = MAX_PRIO-20,
++ .normal_prio = NORMAL_PRIO,
++ .deadline = 0,
++ .time_slice = 1000000,
++#else
+ .prio = MAX_PRIO - 20,
+ .static_prio = MAX_PRIO - 20,
+ .normal_prio = MAX_PRIO - 20,
++#endif
+ .policy = SCHED_NORMAL,
+ .cpus_allowed = CPU_MASK_ALL,
+ .nr_cpus_allowed= NR_CPUS,
+@@ -78,6 +86,7 @@
+ .restart_block = {
+ .fn = do_no_restart_syscall,
+ },
++#ifndef CONFIG_SCHED_MUQSS
+ .se = {
+ .group_node = LIST_HEAD_INIT(init_task.se.group_node),
+ },
+@@ -85,6 +94,7 @@
+ .run_list = LIST_HEAD_INIT(init_task.rt.run_list),
+ .time_slice = RR_TIMESLICE,
+ },
++#endif
+ .tasks = LIST_HEAD_INIT(init_task.tasks),
+ #ifdef CONFIG_SMP
+ .pushable_tasks = PLIST_NODE_INIT(init_task.pushable_tasks, MAX_PRIO),
+diff -Nur a/init/Kconfig b/init/Kconfig
+--- a/init/Kconfig 2019-02-09 17:20:30.481821193 +0000
++++ b/init/Kconfig 2019-02-09 17:46:11.991297545 +0000
+@@ -45,6 +45,18 @@
+
+ menu "General setup"
+
++config SCHED_MUQSS
++ bool "MuQSS cpu scheduler"
++ select HIGH_RES_TIMERS
++ ---help---
++ The Multiple Queue Skiplist Scheduler for excellent interactivity and
++ responsiveness on the desktop and highly scalable deterministic
++ low latency on any hardware.
++
++ Say Y here.
++ default y
++
++
+ config BROKEN
+ bool
+
+@@ -653,6 +665,7 @@
+ depends on ARCH_SUPPORTS_NUMA_BALANCING
+ depends on !ARCH_WANT_NUMA_VARIABLE_LOCALITY
+ depends on SMP && NUMA && MIGRATION
++ depends on !SCHED_MUQSS
+ help
+ This option adds support for automatic NUMA aware memory/task placement.
+ The mechanism is quite primitive and is based on migrating memory when
+@@ -760,9 +773,13 @@
+ help
+ This feature lets CPU scheduler recognize task groups and control CPU
+ bandwidth allocation to such task groups. It uses cgroups to group
+- tasks.
++ tasks. In combination with MuQSS this is purely a STUB to create the
++ files associated with the CPU controller cgroup but most of the
++ controls do nothing. This is useful for working in environments and
++ with applications that will only work if this control group is
++ present.
+
+-if CGROUP_SCHED
++if CGROUP_SCHED && !SCHED_MUQSS
+ config FAIR_GROUP_SCHED
+ bool "Group scheduling for SCHED_OTHER"
+ depends on CGROUP_SCHED
+@@ -869,6 +886,7 @@
+
+ config CGROUP_CPUACCT
+ bool "Simple CPU accounting controller"
++ depends on !SCHED_MUQSS
+ help
+ Provides a simple controller for monitoring the
+ total CPU consumed by the tasks in a cgroup.
+@@ -987,6 +1005,7 @@
+
+ config SCHED_AUTOGROUP
+ bool "Automatic process group scheduling"
++ depends on !SCHED_MUQSS
+ select CGROUPS
+ select CGROUP_SCHED
+ select FAIR_GROUP_SCHED
+diff -Nur a/init/main.c b/init/main.c
+--- a/init/main.c 2019-02-06 16:30:16.000000000 +0000
++++ b/init/main.c 2019-02-09 17:46:11.991297545 +0000
+@@ -1079,6 +1079,8 @@
+
+ rcu_end_inkernel_boot();
+
++ print_scheduler_version();
++
+ if (ramdisk_execute_command) {
+ ret = run_init_process(ramdisk_execute_command);
+ if (!ret)
+diff -Nur a/kernel/delayacct.c b/kernel/delayacct.c
+--- a/kernel/delayacct.c 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/delayacct.c 2019-02-09 17:46:11.991297545 +0000
+@@ -115,7 +115,7 @@
+ */
+ t1 = tsk->sched_info.pcount;
+ t2 = tsk->sched_info.run_delay;
+- t3 = tsk->se.sum_exec_runtime;
++ t3 = tsk_seruntime(tsk);
+
+ d->cpu_count += t1;
+
+diff -Nur a/kernel/exit.c b/kernel/exit.c
+--- a/kernel/exit.c 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/exit.c 2019-02-09 17:46:11.991297545 +0000
+@@ -130,7 +130,7 @@
+ sig->curr_target = next_thread(tsk);
+ }
+
+- add_device_randomness((const void*) &tsk->se.sum_exec_runtime,
++ add_device_randomness((const void*) &tsk_seruntime(tsk),
+ sizeof(unsigned long long));
+
+ /*
+@@ -151,7 +151,7 @@
+ sig->inblock += task_io_get_inblock(tsk);
+ sig->oublock += task_io_get_oublock(tsk);
+ task_io_accounting_add(&sig->ioac, &tsk->ioac);
+- sig->sum_sched_runtime += tsk->se.sum_exec_runtime;
++ sig->sum_sched_runtime += tsk_seruntime(tsk);
+ sig->nr_threads--;
+ __unhash_process(tsk, group_dead);
+ write_sequnlock(&sig->stats_lock);
+diff -Nur a/kernel/kthread.c b/kernel/kthread.c
+--- a/kernel/kthread.c 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/kthread.c 2019-02-09 17:46:11.991297545 +0000
+@@ -424,6 +424,34 @@
+ }
+ EXPORT_SYMBOL(kthread_bind);
+
++#if defined(CONFIG_SCHED_MUQSS) && defined(CONFIG_SMP)
++extern void __do_set_cpus_allowed(struct task_struct *p, const struct cpumask *new_mask);
++
++/*
++ * new_kthread_bind is a special variant of __kthread_bind_mask.
++ * For new threads to work on muqss we want to call do_set_cpus_allowed
++ * without the task_cpu being set and the task rescheduled until they're
++ * rescheduled on their own so we call __do_set_cpus_allowed directly which
++ * only changes the cpumask. This is particularly important for smpboot threads
++ * to work.
++ */
++static void new_kthread_bind(struct task_struct *p, unsigned int cpu)
++{
++ unsigned long flags;
++
++ if (WARN_ON(!wait_task_inactive(p, TASK_UNINTERRUPTIBLE)))
++ return;
++
++ /* It's safe because the task is inactive. */
++ raw_spin_lock_irqsave(&p->pi_lock, flags);
++ __do_set_cpus_allowed(p, cpumask_of(cpu));
++ p->flags |= PF_NO_SETAFFINITY;
++ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
++}
++#else
++#define new_kthread_bind(p, cpu) kthread_bind(p, cpu)
++#endif
++
+ /**
+ * kthread_create_on_cpu - Create a cpu bound kthread
+ * @threadfn: the function to run until signal_pending(current).
+@@ -445,7 +473,7 @@
+ cpu);
+ if (IS_ERR(p))
+ return p;
+- kthread_bind(p, cpu);
++ new_kthread_bind(p, cpu);
+ /* CPU hotplug need to bind once again when unparking the thread. */
+ set_bit(KTHREAD_IS_PER_CPU, &to_kthread(p)->flags);
+ to_kthread(p)->cpu = cpu;
+diff -Nur a/kernel/livepatch/transition.c b/kernel/livepatch/transition.c
+--- a/kernel/livepatch/transition.c 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/livepatch/transition.c 2019-02-09 17:46:11.991297545 +0000
+@@ -290,6 +290,12 @@
+ return 0;
+ }
+
++#ifdef CONFIG_SCHED_MUQSS
++typedef unsigned long rq_flags_t;
++#else
++typedef struct rq_flags rq_flag_t;
++#endif
++
+ /*
+ * Try to safely switch a task to the target patch state. If it's currently
+ * running, or it's sleeping on a to-be-patched or to-be-unpatched function, or
+@@ -298,7 +304,7 @@
+ static bool klp_try_switch_task(struct task_struct *task)
+ {
+ struct rq *rq;
+- struct rq_flags flags;
++ rq_flags_t flags;
+ int ret;
+ bool success = false;
+ char err_buf[STACK_ERR_BUF_SIZE];
+diff -Nur a/kernel/Makefile b/kernel/Makefile
+--- a/kernel/Makefile 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/Makefile 2019-02-09 17:46:11.991297545 +0000
+@@ -10,7 +10,7 @@
+ extable.o params.o \
+ kthread.o sys_ni.o nsproxy.o \
+ notifier.o ksysfs.o cred.o reboot.o \
+- async.o range.o smpboot.o ucount.o
++ async.o range.o smpboot.o ucount.o skip_list.o
+
+ obj-$(CONFIG_MODULES) += kmod.o
+ obj-$(CONFIG_MULTIUSER) += groups.o
+diff -Nur a/kernel/rcu/Kconfig b/kernel/rcu/Kconfig
+--- a/kernel/rcu/Kconfig 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/rcu/Kconfig 2019-02-09 17:46:11.991297545 +0000
+@@ -93,7 +93,7 @@
+ config CONTEXT_TRACKING_FORCE
+ bool "Force context tracking"
+ depends on CONTEXT_TRACKING
+- default y if !NO_HZ_FULL
++ default y if !NO_HZ_FULL && !SCHED_MUQSS
+ help
+ The major pre-requirement for full dynticks to work is to
+ support the context tracking subsystem. But there are also
+diff -Nur a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
+--- a/kernel/sched/cpufreq_schedutil.c 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/sched/cpufreq_schedutil.c 2019-02-09 17:46:12.001297867 +0000
+@@ -177,6 +177,12 @@
+ return cpufreq_driver_resolve_freq(policy, freq);
+ }
+
++#ifdef CONFIG_SCHED_MUQSS
++#define rt_rq_runnable(rq_rt) rt_rq_is_runnable(rq)
++#else
++#define rt_rq_runnable(rq_rt) rt_rq_is_runnable(&rq->rt)
++#endif
++
+ /*
+ * This function computes an effective utilization for the given CPU, to be
+ * used for frequency selection given the linear relation: f = u * f_max.
+@@ -205,7 +211,7 @@
+ sg_cpu->max = max = arch_scale_cpu_capacity(NULL, sg_cpu->cpu);
+ sg_cpu->bw_dl = cpu_bw_dl(rq);
+
+- if (rt_rq_is_runnable(&rq->rt))
++ if (rt_rq_runnable(rq))
+ return max;
+
+ /*
+@@ -626,7 +632,11 @@
+ struct task_struct *thread;
+ struct sched_attr attr = {
+ .size = sizeof(struct sched_attr),
++#ifdef CONFIG_SCHED_MUQSS
++ .sched_policy = SCHED_RR,
++#else
+ .sched_policy = SCHED_DEADLINE,
++#endif
+ .sched_flags = SCHED_FLAG_SUGOV,
+ .sched_nice = 0,
+ .sched_priority = 0,
+diff -Nur a/kernel/sched/cpupri.h b/kernel/sched/cpupri.h
+--- a/kernel/sched/cpupri.h 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/sched/cpupri.h 2019-02-09 17:46:12.001297867 +0000
+@@ -17,9 +17,11 @@
+ int *cpu_to_pri;
+ };
+
++#ifndef CONFIG_SCHED_MUQSS
+ #ifdef CONFIG_SMP
+ int cpupri_find(struct cpupri *cp, struct task_struct *p, struct cpumask *lowest_mask);
+ void cpupri_set(struct cpupri *cp, int cpu, int pri);
+ int cpupri_init(struct cpupri *cp);
+ void cpupri_cleanup(struct cpupri *cp);
+ #endif
++#endif
+diff -Nur a/kernel/sched/cputime.c b/kernel/sched/cputime.c
+--- a/kernel/sched/cputime.c 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/sched/cputime.c 2019-02-09 17:46:12.001297867 +0000
+@@ -265,26 +265,6 @@
+ return accounted;
+ }
+
+-#ifdef CONFIG_64BIT
+-static inline u64 read_sum_exec_runtime(struct task_struct *t)
+-{
+- return t->se.sum_exec_runtime;
+-}
+-#else
+-static u64 read_sum_exec_runtime(struct task_struct *t)
+-{
+- u64 ns;
+- struct rq_flags rf;
+- struct rq *rq;
+-
+- rq = task_rq_lock(t, &rf);
+- ns = t->se.sum_exec_runtime;
+- task_rq_unlock(rq, t, &rf);
+-
+- return ns;
+-}
+-#endif
+-
+ /*
+ * Accumulate raw cputime values of dead tasks (sig->[us]time) and live
+ * tasks (sum on group iteration) belonging to @tsk's group.
+@@ -662,7 +642,7 @@
+ void task_cputime_adjusted(struct task_struct *p, u64 *ut, u64 *st)
+ {
+ struct task_cputime cputime = {
+- .sum_exec_runtime = p->se.sum_exec_runtime,
++ .sum_exec_runtime = tsk_seruntime(p),
+ };
+
+ task_cputime(p, &cputime.utime, &cputime.stime);
+diff -Nur a/kernel/sched/idle.c b/kernel/sched/idle.c
+--- a/kernel/sched/idle.c 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/sched/idle.c 2019-02-09 17:46:12.001297867 +0000
+@@ -224,6 +224,8 @@
+ static void do_idle(void)
+ {
+ int cpu = smp_processor_id();
++ bool pending = false;
++
+ /*
+ * If the arch has a polling bit, we maintain an invariant:
+ *
+@@ -234,7 +236,10 @@
+ */
+
+ __current_set_polling();
+- tick_nohz_idle_enter();
++ if (unlikely(softirq_pending(cpu)))
++ pending = true;
++ else
++ tick_nohz_idle_enter();
+
+ while (!need_resched()) {
+ check_pgt_cache();
+@@ -272,7 +277,8 @@
+ * an IPI to fold the state for us.
+ */
+ preempt_set_need_resched();
+- tick_nohz_idle_exit();
++ if (!pending)
++ tick_nohz_idle_exit();
+ __current_clr_polling();
+
+ /*
+@@ -368,6 +374,7 @@
+ do_idle();
+ }
+
++#ifndef CONFIG_SCHED_MUQSS
+ /*
+ * idle-task scheduling class.
+ */
+@@ -480,3 +487,4 @@
+ .switched_to = switched_to_idle,
+ .update_curr = update_curr_idle,
+ };
++#endif /* CONFIG_SCHED_MUQSS */
+diff -Nur a/kernel/sched/Makefile b/kernel/sched/Makefile
+--- a/kernel/sched/Makefile 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/sched/Makefile 2019-02-09 17:46:11.991297545 +0000
+@@ -16,6 +16,17 @@
+ CFLAGS_core.o := $(PROFILING) -fno-omit-frame-pointer
+ endif
+
++ifdef CONFIG_SCHED_MUQSS
++obj-y += MuQSS.o clock.o cputime.o
++obj-y += idle.o
++obj-y += wait.o wait_bit.o swait.o completion.o
++
++obj-$(CONFIG_SMP) += topology.o
++obj-$(CONFIG_SCHEDSTATS) += stats.o
++obj-$(CONFIG_CPU_FREQ) += cpufreq.o
++obj-$(CONFIG_CPU_FREQ_GOV_SCHEDUTIL) += cpufreq_schedutil.o
++obj-$(CONFIG_CPU_ISOLATION) += isolation.o
++else
+ obj-y += core.o loadavg.o clock.o cputime.o
+ obj-y += idle.o fair.o rt.o deadline.o
+ obj-y += wait.o wait_bit.o swait.o completion.o
+@@ -29,3 +40,4 @@
+ obj-$(CONFIG_CPU_FREQ_GOV_SCHEDUTIL) += cpufreq_schedutil.o
+ obj-$(CONFIG_MEMBARRIER) += membarrier.o
+ obj-$(CONFIG_CPU_ISOLATION) += isolation.o
++endif
+diff -Nur a/kernel/sched/MuQSS.c b/kernel/sched/MuQSS.c
+--- a/kernel/sched/MuQSS.c 1970-01-01 01:00:00.000000000 +0100
++++ b/kernel/sched/MuQSS.c 2019-02-09 17:46:12.001297867 +0000
+@@ -0,0 +1,7366 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * kernel/sched/MuQSS.c, was kernel/sched.c
++ *
++ * Kernel scheduler and related syscalls
++ *
++ * Copyright (C) 1991-2002 Linus Torvalds
++ *
++ * 1996-12-23 Modified by Dave Grothe to fix bugs in semaphores and
++ * make semaphores SMP safe
++ * 1998-11-19 Implemented schedule_timeout() and related stuff
++ * by Andrea Arcangeli
++ * 2002-01-04 New ultra-scalable O(1) scheduler by Ingo Molnar:
++ * hybrid priority-list and round-robin design with
++ * an array-switch method of distributing timeslices
++ * and per-CPU runqueues. Cleanups and useful suggestions
++ * by Davide Libenzi, preemptible kernel bits by Robert Love.
++ * 2003-09-03 Interactivity tuning by Con Kolivas.
++ * 2004-04-02 Scheduler domains code by Nick Piggin
++ * 2007-04-15 Work begun on replacing all interactivity tuning with a
++ * fair scheduling design by Con Kolivas.
++ * 2007-05-05 Load balancing (smp-nice) and other improvements
++ * by Peter Williams
++ * 2007-05-06 Interactivity improvements to CFS by Mike Galbraith
++ * 2007-07-01 Group scheduling enhancements by Srivatsa Vaddagiri
++ * 2007-11-29 RT balancing improvements by Steven Rostedt, Gregory Haskins,
++ * Thomas Gleixner, Mike Kravetz
++ * 2009-08-13 Brainfuck deadline scheduling policy by Con Kolivas deletes
++ * a whole lot of those previous things.
++ * 2016-10-01 Multiple Queue Skiplist Scheduler scalable evolution of BFS
++ * scheduler by Con Kolivas.
++ */
++
++#include <linux/sched/isolation.h>
++#include <linux/sched/loadavg.h>
++
++#include <linux/binfmts.h>
++#include <linux/blkdev.h>
++#include <linux/compat.h>
++#include <linux/context_tracking.h>
++#include <linux/cpuset.h>
++#include <linux/delayacct.h>
++#include <linux/init_task.h>
++#include <linux/kcov.h>
++#include <linux/kprobes.h>
++#include <linux/mmu_context.h>
++#include <linux/module.h>
++#include <linux/nmi.h>
++#include <linux/prefetch.h>
++#include <linux/profile.h>
++#include <linux/rcupdate_wait.h>
++#include <linux/sched.h>
++#include <linux/security.h>
++#include <linux/skip_list.h>
++#include <linux/syscalls.h>
++#include <linux/tick.h>
++#include <linux/wait_bit.h>
++
++#include <asm/irq_regs.h>
++#include <asm/switch_to.h>
++#include <asm/tlb.h>
++
++#include "../workqueue_internal.h"
++#include "../smpboot.h"
++
++#define CREATE_TRACE_POINTS
++#include <trace/events/sched.h>
++
++#include "MuQSS.h"
++
++#define rt_prio(prio) unlikely((prio) < MAX_RT_PRIO)
++#define rt_task(p) rt_prio((p)->prio)
++#define batch_task(p) (unlikely((p)->policy == SCHED_BATCH))
++#define is_rt_policy(policy) ((policy) == SCHED_FIFO || \
++ (policy) == SCHED_RR)
++#define has_rt_policy(p) unlikely(is_rt_policy((p)->policy))
++
++#define is_idle_policy(policy) ((policy) == SCHED_IDLEPRIO)
++#define idleprio_task(p) unlikely(is_idle_policy((p)->policy))
++#define task_running_idle(p) unlikely((p)->prio == IDLE_PRIO)
++
++#define is_iso_policy(policy) ((policy) == SCHED_ISO)
++#define iso_task(p) unlikely(is_iso_policy((p)->policy))
++#define task_running_iso(p) unlikely((p)->prio == ISO_PRIO)
++
++#define rq_idle(rq) ((rq)->rq_prio == PRIO_LIMIT)
++
++#define ISO_PERIOD (5 * HZ)
++
++#define STOP_PRIO (MAX_RT_PRIO - 1)
++
++/*
++ * Some helpers for converting to/from various scales. Use shifts to get
++ * approximate multiples of ten for less overhead.
++ */
++#define APPROX_NS_PS (1073741824) /* Approximate ns per second */
++#define JIFFIES_TO_NS(TIME) ((TIME) * (APPROX_NS_PS / HZ))
++#define JIFFY_NS (APPROX_NS_PS / HZ)
++#define JIFFY_US (1048576 / HZ)
++#define NS_TO_JIFFIES(TIME) ((TIME) / JIFFY_NS)
++#define HALF_JIFFY_NS (APPROX_NS_PS / HZ / 2)
++#define HALF_JIFFY_US (1048576 / HZ / 2)
++#define MS_TO_NS(TIME) ((TIME) << 20)
++#define MS_TO_US(TIME) ((TIME) << 10)
++#define NS_TO_MS(TIME) ((TIME) >> 20)
++#define NS_TO_US(TIME) ((TIME) >> 10)
++#define US_TO_NS(TIME) ((TIME) << 10)
++#define TICK_APPROX_NS ((APPROX_NS_PS+HZ/2)/HZ)
++
++#define RESCHED_US (100) /* Reschedule if less than this many μs left */
++
++void print_scheduler_version(void)
++{
++ printk(KERN_INFO "MuQSS CPU scheduler v0.180 by Con Kolivas.\n");
++}
++
++#define RQSHARE_NONE 0
++#define RQSHARE_SMT 1
++#define RQSHARE_MC 2
++#define RQSHARE_SMP 3
++
++/*
++ * This determines what level of runqueue sharing will be done and is
++ * configurable at boot time with the bootparam rqshare =
++ */
++static int rqshare __read_mostly = CONFIG_SHARERQ; /* Default RQSHARE_MC */
++
++static int __init set_rqshare(char *str)
++{
++ if (!strncmp(str, "none", 4)) {
++ rqshare = RQSHARE_NONE;
++ return 0;
++ }
++ if (!strncmp(str, "smt", 3)) {
++ rqshare = RQSHARE_SMT;
++ return 0;
++ }
++ if (!strncmp(str, "mc", 2)) {
++ rqshare = RQSHARE_MC;
++ return 0;
++ }
++ if (!strncmp(str, "smp", 2)) {
++ rqshare = RQSHARE_SMP;
++ return 0;
++ }
++ return 1;
++}
++__setup("rqshare=", set_rqshare);
++
++/*
++ * This is the time all tasks within the same priority round robin.
++ * Value is in ms and set to a minimum of 6ms.
++ * Tunable via /proc interface.
++ */
++int rr_interval __read_mostly = 6;
++
++/*
++ * Tunable to choose whether to prioritise latency or throughput, simple
++ * binary yes or no
++ */
++int sched_interactive __read_mostly = 1;
++
++/*
++ * sched_iso_cpu - sysctl which determines the cpu percentage SCHED_ISO tasks
++ * are allowed to run five seconds as real time tasks. This is the total over
++ * all online cpus.
++ */
++int sched_iso_cpu __read_mostly = 70;
++
++/*
++ * sched_yield_type - Choose what sort of yield sched_yield will perform.
++ * 0: No yield.
++ * 1: Yield only to better priority/deadline tasks. (default)
++ * 2: Expire timeslice and recalculate deadline.
++ */
++int sched_yield_type __read_mostly = 1;
++
++/*
++ * The relative length of deadline for each priority(nice) level.
++ */
++static int prio_ratios[NICE_WIDTH] __read_mostly;
++
++
++/*
++ * The quota handed out to tasks of all priority levels when refilling their
++ * time_slice.
++ */
++static inline int timeslice(void)
++{
++ return MS_TO_US(rr_interval);
++}
++
++DEFINE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
++
++#ifdef CONFIG_SMP
++/*
++ * Total number of runqueues. Equals number of CPUs when there is no runqueue
++ * sharing but is usually less with SMT/MC sharing of runqueues.
++ */
++static int total_runqueues __read_mostly = 1;
++
++static cpumask_t cpu_idle_map ____cacheline_aligned_in_smp;
++
++struct rq *cpu_rq(int cpu)
++{
++ return &per_cpu(runqueues, (cpu));
++}
++#define cpu_curr(cpu) (cpu_rq(cpu)->curr)
++
++/*
++ * For asym packing, by default the lower numbered cpu has higher priority.
++ */
++int __weak arch_asym_cpu_priority(int cpu)
++{
++ return -cpu;
++}
++
++int __weak arch_sd_sibling_asym_packing(void)
++{
++ return 0*SD_ASYM_PACKING;
++}
++#else
++struct rq *uprq;
++#endif /* CONFIG_SMP */
++
++#include "stats.h"
++
++/*
++ * All common locking functions performed on rq->lock. rq->clock is local to
++ * the CPU accessing it so it can be modified just with interrupts disabled
++ * when we're not updating niffies.
++ * Looking up task_rq must be done under rq->lock to be safe.
++ */
++
++/*
++ * RQ-clock updating methods:
++ */
++
++#ifdef HAVE_SCHED_AVG_IRQ
++static void update_irq_load_avg(struct rq *rq, long delta);
++#else
++static inline void update_irq_load_avg(struct rq *rq, long delta) {}
++#endif
++
++static void update_rq_clock_task(struct rq *rq, s64 delta)
++{
++/*
++ * In theory, the compile should just see 0 here, and optimize out the call
++ * to sched_rt_avg_update. But I don't trust it...
++ */
++#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
++ s64 steal = 0, irq_delta = 0;
++#endif
++#ifdef CONFIG_IRQ_TIME_ACCOUNTING
++ irq_delta = irq_time_read(cpu_of(rq)) - rq->prev_irq_time;
++
++ /*
++ * Since irq_time is only updated on {soft,}irq_exit, we might run into
++ * this case when a previous update_rq_clock() happened inside a
++ * {soft,}irq region.
++ *
++ * When this happens, we stop ->clock_task and only update the
++ * prev_irq_time stamp to account for the part that fit, so that a next
++ * update will consume the rest. This ensures ->clock_task is
++ * monotonic.
++ *
++ * It does however cause some slight miss-attribution of {soft,}irq
++ * time, a more accurate solution would be to update the irq_time using
++ * the current rq->clock timestamp, except that would require using
++ * atomic ops.
++ */
++ if (irq_delta > delta)
++ irq_delta = delta;
++
++ rq->prev_irq_time += irq_delta;
++ delta -= irq_delta;
++#endif
++#ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING
++ if (static_key_false((&paravirt_steal_rq_enabled))) {
++ steal = paravirt_steal_clock(cpu_of(rq));
++ steal -= rq->prev_steal_time_rq;
++
++ if (unlikely(steal > delta))
++ steal = delta;
++
++ rq->prev_steal_time_rq += steal;
++ delta -= steal;
++ }
++#endif
++ rq->clock_task += delta;
++
++#ifdef HAVE_SCHED_AVG_IRQ
++ if (irq_delta + steal)
++ update_irq_load_avg(rq, irq_delta + steal);
++#endif
++}
++
++static inline void update_rq_clock(struct rq *rq)
++{
++ s64 delta = sched_clock_cpu(cpu_of(rq)) - rq->clock;
++
++ if (unlikely(delta < 0))
++ return;
++ rq->clock += delta;
++ update_rq_clock_task(rq, delta);
++}
++
++/*
++ * Niffies are a globally increasing nanosecond counter. They're only used by
++ * update_load_avg and time_slice_expired, however deadlines are based on them
++ * across CPUs. Update them whenever we will call one of those functions, and
++ * synchronise them across CPUs whenever we hold both runqueue locks.
++ */
++static inline void update_clocks(struct rq *rq)
++{
++ s64 ndiff, minndiff;
++ long jdiff;
++
++ update_rq_clock(rq);
++ ndiff = rq->clock - rq->old_clock;
++ rq->old_clock = rq->clock;
++ jdiff = jiffies - rq->last_jiffy;
++
++ /* Subtract any niffies added by balancing with other rqs */
++ ndiff -= rq->niffies - rq->last_niffy;
++ minndiff = JIFFIES_TO_NS(jdiff) - rq->niffies + rq->last_jiffy_niffies;
++ if (minndiff < 0)
++ minndiff = 0;
++ ndiff = max(ndiff, minndiff);
++ rq->niffies += ndiff;
++ rq->last_niffy = rq->niffies;
++ if (jdiff) {
++ rq->last_jiffy += jdiff;
++ rq->last_jiffy_niffies = rq->niffies;
++ }
++}
++
++static inline int task_on_rq_queued(struct task_struct *p)
++{
++ return p->on_rq == TASK_ON_RQ_QUEUED;
++}
++
++static inline int task_on_rq_migrating(struct task_struct *p)
++{
++ return p->on_rq == TASK_ON_RQ_MIGRATING;
++}
++
++/*
++ * Any time we have two runqueues locked we use that as an opportunity to
++ * synchronise niffies to the highest value as idle ticks may have artificially
++ * kept niffies low on one CPU and the truth can only be later.
++ */
++static inline void synchronise_niffies(struct rq *rq1, struct rq *rq2)
++{
++ if (rq1->niffies > rq2->niffies)
++ rq2->niffies = rq1->niffies;
++ else
++ rq1->niffies = rq2->niffies;
++}
++
++/*
++ * double_rq_lock - safely lock two runqueues
++ *
++ * Note this does not disable interrupts like task_rq_lock,
++ * you need to do so manually before calling.
++ */
++
++/* For when we know rq1 != rq2 */
++static inline void __double_rq_lock(struct rq *rq1, struct rq *rq2)
++ __acquires(rq1->lock)
++ __acquires(rq2->lock)
++{
++ if (rq1 < rq2) {
++ raw_spin_lock(rq1->lock);
++ raw_spin_lock_nested(rq2->lock, SINGLE_DEPTH_NESTING);
++ } else {
++ raw_spin_lock(rq2->lock);
++ raw_spin_lock_nested(rq1->lock, SINGLE_DEPTH_NESTING);
++ }
++}
++
++static inline void double_rq_lock(struct rq *rq1, struct rq *rq2)
++ __acquires(rq1->lock)
++ __acquires(rq2->lock)
++{
++ BUG_ON(!irqs_disabled());
++ if (rq1->lock == rq2->lock) {
++ raw_spin_lock(rq1->lock);
++ __acquire(rq2->lock); /* Fake it out ;) */
++ } else
++ __double_rq_lock(rq1, rq2);
++ synchronise_niffies(rq1, rq2);
++}
++
++/*
++ * double_rq_unlock - safely unlock two runqueues
++ *
++ * Note this does not restore interrupts like task_rq_unlock,
++ * you need to do so manually after calling.
++ */
++static inline void double_rq_unlock(struct rq *rq1, struct rq *rq2)
++ __releases(rq1->lock)
++ __releases(rq2->lock)
++{
++ raw_spin_unlock(rq1->lock);
++ if (rq1->lock != rq2->lock)
++ raw_spin_unlock(rq2->lock);
++ else
++ __release(rq2->lock);
++}
++
++static inline void lock_all_rqs(void)
++{
++ int cpu;
++
++ preempt_disable();
++ for_each_possible_cpu(cpu) {
++ struct rq *rq = cpu_rq(cpu);
++
++ do_raw_spin_lock(rq->lock);
++ }
++}
++
++static inline void unlock_all_rqs(void)
++{
++ int cpu;
++
++ for_each_possible_cpu(cpu) {
++ struct rq *rq = cpu_rq(cpu);
++
++ do_raw_spin_unlock(rq->lock);
++ }
++ preempt_enable();
++}
++
++/* Specially nest trylock an rq */
++static inline bool trylock_rq(struct rq *this_rq, struct rq *rq)
++{
++ if (unlikely(!do_raw_spin_trylock(rq->lock)))
++ return false;
++ spin_acquire(rq->lock.dep_map, SINGLE_DEPTH_NESTING, 1, _RET_IP_);
++ synchronise_niffies(this_rq, rq);
++ return true;
++}
++
++/* Unlock a specially nested trylocked rq */
++static inline void unlock_rq(struct rq *rq)
++{
++ spin_release(rq->lock.dep_map, 1, _RET_IP_);
++ do_raw_spin_unlock(rq->lock);
++}
++
++/*
++ * cmpxchg based fetch_or, macro so it works for different integer types
++ */
++#define fetch_or(ptr, mask) \
++ ({ \
++ typeof(ptr) _ptr = (ptr); \
++ typeof(mask) _mask = (mask); \
++ typeof(*_ptr) _old, _val = *_ptr; \
++ \
++ for (;;) { \
++ _old = cmpxchg(_ptr, _val, _val | _mask); \
++ if (_old == _val) \
++ break; \
++ _val = _old; \
++ } \
++ _old; \
++})
++
++#if defined(CONFIG_SMP) && defined(TIF_POLLING_NRFLAG)
++/*
++ * Atomically set TIF_NEED_RESCHED and test for TIF_POLLING_NRFLAG,
++ * this avoids any races wrt polling state changes and thereby avoids
++ * spurious IPIs.
++ */
++static bool set_nr_and_not_polling(struct task_struct *p)
++{
++ struct thread_info *ti = task_thread_info(p);
++ return !(fetch_or(&ti->flags, _TIF_NEED_RESCHED) & _TIF_POLLING_NRFLAG);
++}
++
++/*
++ * Atomically set TIF_NEED_RESCHED if TIF_POLLING_NRFLAG is set.
++ *
++ * If this returns true, then the idle task promises to call
++ * sched_ttwu_pending() and reschedule soon.
++ */
++static bool set_nr_if_polling(struct task_struct *p)
++{
++ struct thread_info *ti = task_thread_info(p);
++ typeof(ti->flags) old, val = READ_ONCE(ti->flags);
++
++ for (;;) {
++ if (!(val & _TIF_POLLING_NRFLAG))
++ return false;
++ if (val & _TIF_NEED_RESCHED)
++ return true;
++ old = cmpxchg(&ti->flags, val, val | _TIF_NEED_RESCHED);
++ if (old == val)
++ break;
++ val = old;
++ }
++ return true;
++}
++
++#else
++static bool set_nr_and_not_polling(struct task_struct *p)
++{
++ set_tsk_need_resched(p);
++ return true;
++}
++
++#ifdef CONFIG_SMP
++static bool set_nr_if_polling(struct task_struct *p)
++{
++ return false;
++}
++#endif
++#endif
++
++void wake_q_add(struct wake_q_head *head, struct task_struct *task)
++{
++ struct wake_q_node *node = &task->wake_q;
++
++ /*
++ * Atomically grab the task, if ->wake_q is !nil already it means
++ * its already queued (either by us or someone else) and will get the
++ * wakeup due to that.
++ *
++ * This cmpxchg() executes a full barrier, which pairs with the full
++ * barrier executed by the wakeup in wake_up_q().
++ */
++ if (cmpxchg(&node->next, NULL, WAKE_Q_TAIL))
++ return;
++
++ get_task_struct(task);
++
++ /*
++ * The head is context local, there can be no concurrency.
++ */
++ *head->lastp = node;
++ head->lastp = &node->next;
++}
++
++void wake_up_q(struct wake_q_head *head)
++{
++ struct wake_q_node *node = head->first;
++
++ while (node != WAKE_Q_TAIL) {
++ struct task_struct *task;
++
++ task = container_of(node, struct task_struct, wake_q);
++ BUG_ON(!task);
++ /* Task can safely be re-inserted now */
++ node = node->next;
++ task->wake_q.next = NULL;
++
++ /*
++ * wake_up_process() executes a full barrier, which pairs with
++ * the queueing in wake_q_add() so as not to miss wakeups.
++ */
++ wake_up_process(task);
++ put_task_struct(task);
++ }
++}
++
++static inline void smp_sched_reschedule(int cpu)
++{
++ if (likely(cpu_online(cpu)))
++ smp_send_reschedule(cpu);
++}
++
++/*
++ * resched_task - mark a task 'to be rescheduled now'.
++ *
++ * On UP this means the setting of the need_resched flag, on SMP it
++ * might also involve a cross-CPU call to trigger the scheduler on
++ * the target CPU.
++ */
++void resched_task(struct task_struct *p)
++{
++ int cpu;
++#ifdef CONFIG_LOCKDEP
++ /* Kernel threads call this when creating workqueues while still
++ * inactive from __kthread_bind_mask, holding only the pi_lock */
++ if (!(p->flags & PF_KTHREAD)) {
++ struct rq *rq = task_rq(p);
++
++ lockdep_assert_held(rq->lock);
++ }
++#endif
++ if (test_tsk_need_resched(p))
++ return;
++
++ cpu = task_cpu(p);
++ if (cpu == smp_processor_id()) {
++ set_tsk_need_resched(p);
++ set_preempt_need_resched();
++ return;
++ }
++
++ if (set_nr_and_not_polling(p))
++ smp_sched_reschedule(cpu);
++ else
++ trace_sched_wake_idle_without_ipi(cpu);
++}
++
++/*
++ * A task that is not running or queued will not have a node set.
++ * A task that is queued but not running will have a node set.
++ * A task that is currently running will have ->on_cpu set but no node set.
++ */
++static inline bool task_queued(struct task_struct *p)
++{
++ return !skiplist_node_empty(&p->node);
++}
++
++static void enqueue_task(struct rq *rq, struct task_struct *p, int flags);
++static inline void resched_if_idle(struct rq *rq);
++
++/* Dodgy workaround till we figure out where the softirqs are going */
++static inline void do_pending_softirq(struct rq *rq, struct task_struct *next)
++{
++ if (unlikely(next == rq->idle && local_softirq_pending() && !in_interrupt()))
++ do_softirq_own_stack();
++}
++
++static inline bool deadline_before(u64 deadline, u64 time)
++{
++ return (deadline < time);
++}
++
++/*
++ * Deadline is "now" in niffies + (offset by priority). Setting the deadline
++ * is the key to everything. It distributes cpu fairly amongst tasks of the
++ * same nice value, it proportions cpu according to nice level, it means the
++ * task that last woke up the longest ago has the earliest deadline, thus
++ * ensuring that interactive tasks get low latency on wake up. The CPU
++ * proportion works out to the square of the virtual deadline difference, so
++ * this equation will give nice 19 3% CPU compared to nice 0.
++ */
++static inline u64 prio_deadline_diff(int user_prio)
++{
++ return (prio_ratios[user_prio] * rr_interval * (MS_TO_NS(1) / 128));
++}
++
++static inline u64 task_deadline_diff(struct task_struct *p)
++{
++ return prio_deadline_diff(TASK_USER_PRIO(p));
++}
++
++static inline u64 static_deadline_diff(int static_prio)
++{
++ return prio_deadline_diff(USER_PRIO(static_prio));
++}
++
++static inline int longest_deadline_diff(void)
++{
++ return prio_deadline_diff(39);
++}
++
++static inline int ms_longest_deadline_diff(void)
++{
++ return NS_TO_MS(longest_deadline_diff());
++}
++
++static inline bool rq_local(struct rq *rq);
++
++#ifndef SCHED_CAPACITY_SCALE
++#define SCHED_CAPACITY_SCALE 1024
++#endif
++
++static inline int rq_load(struct rq *rq)
++{
++ return rq->nr_running;
++}
++
++/*
++ * Update the load average for feeding into cpu frequency governors. Use a
++ * rough estimate of a rolling average with ~ time constant of 32ms.
++ * 80/128 ~ 0.63. * 80 / 32768 / 128 == * 5 / 262144
++ * Make sure a call to update_clocks has been made before calling this to get
++ * an updated rq->niffies.
++ */
++static void update_load_avg(struct rq *rq, unsigned int flags)
++{
++ long us_interval, load;
++ unsigned long curload;
++
++ us_interval = NS_TO_US(rq->niffies - rq->load_update);
++ if (unlikely(us_interval <= 0))
++ return;
++
++ curload = rq_load(rq);
++ load = rq->load_avg - (rq->load_avg * us_interval * 5 / 262144);
++ if (unlikely(load < 0))
++ load = 0;
++ load += curload * curload * SCHED_CAPACITY_SCALE * us_interval * 5 / 262144;
++ rq->load_avg = load;
++
++ rq->load_update = rq->niffies;
++ update_irq_load_avg(rq, 0);
++ if (likely(rq_local(rq)))
++ cpufreq_trigger(rq, flags);
++}
++
++#ifdef HAVE_SCHED_AVG_IRQ
++/*
++ * IRQ variant of update_load_avg below. delta is actually time in nanoseconds
++ * here so we scale curload to how long it's been since the last update.
++ */
++static void update_irq_load_avg(struct rq *rq, long delta)
++{
++ long us_interval, load;
++ unsigned long curload;
++
++ us_interval = NS_TO_US(rq->niffies - rq->irq_load_update);
++ if (unlikely(us_interval <= 0))
++ return;
++
++ curload = NS_TO_US(delta) / us_interval;
++ load = rq->irq_load_avg - (rq->irq_load_avg * us_interval * 5 / 262144);
++ if (unlikely(load < 0))
++ load = 0;
++ load += curload * curload * SCHED_CAPACITY_SCALE * us_interval * 5 / 262144;
++ rq->irq_load_avg = load;
++
++ rq->irq_load_update = rq->niffies;
++}
++#endif
++
++/*
++ * Removing from the runqueue. Enter with rq locked. Deleting a task
++ * from the skip list is done via the stored node reference in the task struct
++ * and does not require a full look up. Thus it occurs in O(k) time where k
++ * is the "level" of the list the task was stored at - usually < 4, max 8.
++ */
++static void dequeue_task(struct rq *rq, struct task_struct *p, int flags)
++{
++ skiplist_delete(rq->sl, &p->node);
++ rq->best_key = rq->node->next[0]->key;
++ update_clocks(rq);
++
++ if (!(flags & DEQUEUE_SAVE))
++ sched_info_dequeued(task_rq(p), p);
++ rq->nr_running--;
++ if (rt_task(p))
++ rq->rt_nr_running--;
++ update_load_avg(rq, flags);
++}
++
++#ifdef CONFIG_PREEMPT_RCU
++static bool rcu_read_critical(struct task_struct *p)
++{
++ return p->rcu_read_unlock_special.b.blocked;
++}
++#else /* CONFIG_PREEMPT_RCU */
++#define rcu_read_critical(p) (false)
++#endif /* CONFIG_PREEMPT_RCU */
++
++/*
++ * To determine if it's safe for a task of SCHED_IDLEPRIO to actually run as
++ * an idle task, we ensure none of the following conditions are met.
++ */
++static bool idleprio_suitable(struct task_struct *p)
++{
++ return (!(task_contributes_to_load(p)) && !(p->flags & (PF_EXITING)) &&
++ !signal_pending(p) && !rcu_read_critical(p) && !freezing(p));
++}
++
++/*
++ * To determine if a task of SCHED_ISO can run in pseudo-realtime, we check
++ * that the iso_refractory flag is not set.
++ */
++static inline bool isoprio_suitable(struct rq *rq)
++{
++ return !rq->iso_refractory;
++}
++
++/*
++ * Adding to the runqueue. Enter with rq locked.
++ */
++static void enqueue_task(struct rq *rq, struct task_struct *p, int flags)
++{
++ unsigned int randseed, cflags = 0;
++ u64 sl_id;
++
++ if (!rt_task(p)) {
++ /* Check it hasn't gotten rt from PI */
++ if ((idleprio_task(p) && idleprio_suitable(p)) ||
++ (iso_task(p) && isoprio_suitable(rq)))
++ p->prio = p->normal_prio;
++ else
++ p->prio = NORMAL_PRIO;
++ } else
++ rq->rt_nr_running++;
++ /*
++ * The sl_id key passed to the skiplist generates a sorted list.
++ * Realtime and sched iso tasks run FIFO so they only need be sorted
++ * according to priority. The skiplist will put tasks of the same
++ * key inserted later in FIFO order. Tasks of sched normal, batch
++ * and idleprio are sorted according to their deadlines. Idleprio
++ * tasks are offset by an impossibly large deadline value ensuring
++ * they get sorted into last positions, but still according to their
++ * own deadlines. This creates a "landscape" of skiplists running
++ * from priority 0 realtime in first place to the lowest priority
++ * idleprio tasks last. Skiplist insertion is an O(log n) process.
++ */
++ if (p->prio <= ISO_PRIO) {
++ sl_id = p->prio;
++ } else {
++ sl_id = p->deadline;
++ if (idleprio_task(p)) {
++ if (p->prio == IDLE_PRIO)
++ sl_id |= 0xF000000000000000;
++ else
++ sl_id += longest_deadline_diff();
++ }
++ }
++ /*
++ * Some architectures don't have better than microsecond resolution
++ * so mask out ~microseconds as the random seed for skiplist insertion.
++ */
++ update_clocks(rq);
++ if (!(flags & ENQUEUE_RESTORE))
++ sched_info_queued(rq, p);
++ randseed = (rq->niffies >> 10) & 0xFFFFFFFF;
++ skiplist_insert(rq->sl, &p->node, sl_id, p, randseed);
++ rq->best_key = rq->node->next[0]->key;
++ if (p->in_iowait)
++ cflags |= SCHED_CPUFREQ_IOWAIT;
++ rq->nr_running++;
++ update_load_avg(rq, cflags);
++}
++
++/*
++ * Returns the relative length of deadline all compared to the shortest
++ * deadline which is that of nice -20.
++ */
++static inline int task_prio_ratio(struct task_struct *p)
++{
++ return prio_ratios[TASK_USER_PRIO(p)];
++}
++
++/*
++ * task_timeslice - all tasks of all priorities get the exact same timeslice
++ * length. CPU distribution is handled by giving different deadlines to
++ * tasks of different priorities. Use 128 as the base value for fast shifts.
++ */
++static inline int task_timeslice(struct task_struct *p)
++{
++ return (rr_interval * task_prio_ratio(p) / 128);
++}
++
++#ifdef CONFIG_SMP
++/* Entered with rq locked */
++static inline void resched_if_idle(struct rq *rq)
++{
++ if (rq_idle(rq))
++ resched_task(rq->curr);
++}
++
++static inline bool rq_local(struct rq *rq)
++{
++ return (rq->cpu == smp_processor_id());
++}
++#ifdef CONFIG_SMT_NICE
++static const cpumask_t *thread_cpumask(int cpu);
++
++/* Find the best real time priority running on any SMT siblings of cpu and if
++ * none are running, the static priority of the best deadline task running.
++ * The lookups to the other runqueues is done lockless as the occasional wrong
++ * value would be harmless. */
++static int best_smt_bias(struct rq *this_rq)
++{
++ int other_cpu, best_bias = 0;
++
++ for_each_cpu(other_cpu, &this_rq->thread_mask) {
++ struct rq *rq = cpu_rq(other_cpu);
++
++ if (rq_idle(rq))
++ continue;
++ if (unlikely(!rq->online))
++ continue;
++ if (!rq->rq_mm)
++ continue;
++ if (likely(rq->rq_smt_bias > best_bias))
++ best_bias = rq->rq_smt_bias;
++ }
++ return best_bias;
++}
++
++static int task_prio_bias(struct task_struct *p)
++{
++ if (rt_task(p))
++ return 1 << 30;
++ else if (task_running_iso(p))
++ return 1 << 29;
++ else if (task_running_idle(p))
++ return 0;
++ return MAX_PRIO - p->static_prio;
++}
++
++static bool smt_always_schedule(struct task_struct __maybe_unused *p, struct rq __maybe_unused *this_rq)
++{
++ return true;
++}
++
++static bool (*smt_schedule)(struct task_struct *p, struct rq *this_rq) = &smt_always_schedule;
++
++/* We've already decided p can run on CPU, now test if it shouldn't for SMT
++ * nice reasons. */
++static bool smt_should_schedule(struct task_struct *p, struct rq *this_rq)
++{
++ int best_bias, task_bias;
++
++ /* Kernel threads always run */
++ if (unlikely(!p->mm))
++ return true;
++ if (rt_task(p))
++ return true;
++ if (!idleprio_suitable(p))
++ return true;
++ best_bias = best_smt_bias(this_rq);
++ /* The smt siblings are all idle or running IDLEPRIO */
++ if (best_bias < 1)
++ return true;
++ task_bias = task_prio_bias(p);
++ if (task_bias < 1)
++ return false;
++ if (task_bias >= best_bias)
++ return true;
++ /* Dither 25% cpu of normal tasks regardless of nice difference */
++ if (best_bias % 4 == 1)
++ return true;
++ /* Sorry, you lose */
++ return false;
++}
++#else /* CONFIG_SMT_NICE */
++#define smt_schedule(p, this_rq) (true)
++#endif /* CONFIG_SMT_NICE */
++
++static inline void atomic_set_cpu(int cpu, cpumask_t *cpumask)
++{
++ set_bit(cpu, (volatile unsigned long *)cpumask);
++}
++
++/*
++ * The cpu_idle_map stores a bitmap of all the CPUs currently idle to
++ * allow easy lookup of whether any suitable idle CPUs are available.
++ * It's cheaper to maintain a binary yes/no if there are any idle CPUs on the
++ * idle_cpus variable than to do a full bitmask check when we are busy. The
++ * bits are set atomically but read locklessly as occasional false positive /
++ * negative is harmless.
++ */
++static inline void set_cpuidle_map(int cpu)
++{
++ if (likely(cpu_online(cpu)))
++ atomic_set_cpu(cpu, &cpu_idle_map);
++}
++
++static inline void atomic_clear_cpu(int cpu, cpumask_t *cpumask)
++{
++ clear_bit(cpu, (volatile unsigned long *)cpumask);
++}
++
++static inline void clear_cpuidle_map(int cpu)
++{
++ atomic_clear_cpu(cpu, &cpu_idle_map);
++}
++
++static bool suitable_idle_cpus(struct task_struct *p)
++{
++ return (cpumask_intersects(&p->cpus_allowed, &cpu_idle_map));
++}
++
++/*
++ * Resched current on rq. We don't know if rq is local to this CPU nor if it
++ * is locked so we do not use an intermediate variable for the task to avoid
++ * having it dereferenced.
++ */
++static void resched_curr(struct rq *rq)
++{
++ int cpu;
++
++ if (test_tsk_need_resched(rq->curr))
++ return;
++
++ rq->preempt = rq->curr;
++ cpu = rq->cpu;
++
++ /* We're doing this without holding the rq lock if it's not task_rq */
++
++ if (cpu == smp_processor_id()) {
++ set_tsk_need_resched(rq->curr);
++ set_preempt_need_resched();
++ return;
++ }
++
++ if (set_nr_and_not_polling(rq->curr))
++ smp_sched_reschedule(cpu);
++ else
++ trace_sched_wake_idle_without_ipi(cpu);
++}
++
++#define CPUIDLE_DIFF_THREAD (1)
++#define CPUIDLE_DIFF_CORE (2)
++#define CPUIDLE_CACHE_BUSY (4)
++#define CPUIDLE_DIFF_CPU (8)
++#define CPUIDLE_THREAD_BUSY (16)
++#define CPUIDLE_DIFF_NODE (32)
++
++/*
++ * The best idle CPU is chosen according to the CPUIDLE ranking above where the
++ * lowest value would give the most suitable CPU to schedule p onto next. The
++ * order works out to be the following:
++ *
++ * Same thread, idle or busy cache, idle or busy threads
++ * Other core, same cache, idle or busy cache, idle threads.
++ * Same node, other CPU, idle cache, idle threads.
++ * Same node, other CPU, busy cache, idle threads.
++ * Other core, same cache, busy threads.
++ * Same node, other CPU, busy threads.
++ * Other node, other CPU, idle cache, idle threads.
++ * Other node, other CPU, busy cache, idle threads.
++ * Other node, other CPU, busy threads.
++ */
++static int best_mask_cpu(int best_cpu, struct rq *rq, cpumask_t *tmpmask)
++{
++ int best_ranking = CPUIDLE_DIFF_NODE | CPUIDLE_THREAD_BUSY |
++ CPUIDLE_DIFF_CPU | CPUIDLE_CACHE_BUSY | CPUIDLE_DIFF_CORE |
++ CPUIDLE_DIFF_THREAD;
++ int cpu_tmp;
++
++ if (cpumask_test_cpu(best_cpu, tmpmask))
++ goto out;
++
++ for_each_cpu(cpu_tmp, tmpmask) {
++ int ranking, locality;
++ struct rq *tmp_rq;
++
++ ranking = 0;
++ tmp_rq = cpu_rq(cpu_tmp);
++
++ locality = rq->cpu_locality[cpu_tmp];
++#ifdef CONFIG_NUMA
++ if (locality > 3)
++ ranking |= CPUIDLE_DIFF_NODE;
++ else
++#endif
++ if (locality > 2)
++ ranking |= CPUIDLE_DIFF_CPU;
++#ifdef CONFIG_SCHED_MC
++ else if (locality == 2)
++ ranking |= CPUIDLE_DIFF_CORE;
++ else if (!(tmp_rq->cache_idle(tmp_rq)))
++ ranking |= CPUIDLE_CACHE_BUSY;
++#endif
++#ifdef CONFIG_SCHED_SMT
++ if (locality == 1)
++ ranking |= CPUIDLE_DIFF_THREAD;
++ if (!(tmp_rq->siblings_idle(tmp_rq)))
++ ranking |= CPUIDLE_THREAD_BUSY;
++#endif
++ if (ranking < best_ranking) {
++ best_cpu = cpu_tmp;
++ best_ranking = ranking;
++ }
++ }
++out:
++ return best_cpu;
++}
++
++bool cpus_share_cache(int this_cpu, int that_cpu)
++{
++ struct rq *this_rq = cpu_rq(this_cpu);
++
++ return (this_rq->cpu_locality[that_cpu] < 3);
++}
++
++/* As per resched_curr but only will resched idle task */
++static inline void resched_idle(struct rq *rq)
++{
++ if (test_tsk_need_resched(rq->idle))
++ return;
++
++ rq->preempt = rq->idle;
++
++ set_tsk_need_resched(rq->idle);
++
++ if (rq_local(rq)) {
++ set_preempt_need_resched();
++ return;
++ }
++
++ smp_sched_reschedule(rq->cpu);
++}
++
++static struct rq *resched_best_idle(struct task_struct *p, int cpu)
++{
++ cpumask_t tmpmask;
++ struct rq *rq;
++ int best_cpu;
++
++ cpumask_and(&tmpmask, &p->cpus_allowed, &cpu_idle_map);
++ best_cpu = best_mask_cpu(cpu, task_rq(p), &tmpmask);
++ rq = cpu_rq(best_cpu);
++ if (!smt_schedule(p, rq))
++ return NULL;
++ rq->preempt = p;
++ resched_idle(rq);
++ return rq;
++}
++
++static inline void resched_suitable_idle(struct task_struct *p)
++{
++ if (suitable_idle_cpus(p))
++ resched_best_idle(p, task_cpu(p));
++}
++
++static inline struct rq *rq_order(struct rq *rq, int cpu)
++{
++ return rq->rq_order[cpu];
++}
++#else /* CONFIG_SMP */
++static inline void set_cpuidle_map(int cpu)
++{
++}
++
++static inline void clear_cpuidle_map(int cpu)
++{
++}
++
++static inline bool suitable_idle_cpus(struct task_struct *p)
++{
++ return uprq->curr == uprq->idle;
++}
++
++static inline void resched_suitable_idle(struct task_struct *p)
++{
++}
++
++static inline void resched_curr(struct rq *rq)
++{
++ resched_task(rq->curr);
++}
++
++static inline void resched_if_idle(struct rq *rq)
++{
++}
++
++static inline bool rq_local(struct rq *rq)
++{
++ return true;
++}
++
++static inline struct rq *rq_order(struct rq *rq, int cpu)
++{
++ return rq;
++}
++
++static inline bool smt_schedule(struct task_struct *p, struct rq *rq)
++{
++ return true;
++}
++#endif /* CONFIG_SMP */
++
++static inline int normal_prio(struct task_struct *p)
++{
++ if (has_rt_policy(p))
++ return MAX_RT_PRIO - 1 - p->rt_priority;
++ if (idleprio_task(p))
++ return IDLE_PRIO;
++ if (iso_task(p))
++ return ISO_PRIO;
++ return NORMAL_PRIO;
++}
++
++/*
++ * Calculate the current priority, i.e. the priority
++ * taken into account by the scheduler. This value might
++ * be boosted by RT tasks as it will be RT if the task got
++ * RT-boosted. If not then it returns p->normal_prio.
++ */
++static int effective_prio(struct task_struct *p)
++{
++ p->normal_prio = normal_prio(p);
++ /*
++ * If we are RT tasks or we were boosted to RT priority,
++ * keep the priority unchanged. Otherwise, update priority
++ * to the normal priority:
++ */
++ if (!rt_prio(p->prio))
++ return p->normal_prio;
++ return p->prio;
++}
++
++/*
++ * activate_task - move a task to the runqueue. Enter with rq locked.
++ */
++static void activate_task(struct task_struct *p, struct rq *rq)
++{
++ resched_if_idle(rq);
++
++ /*
++ * Sleep time is in units of nanosecs, so shift by 20 to get a
++ * milliseconds-range estimation of the amount of time that the task
++ * spent sleeping:
++ */
++ if (unlikely(prof_on == SLEEP_PROFILING)) {
++ if (p->state == TASK_UNINTERRUPTIBLE)
++ profile_hits(SLEEP_PROFILING, (void *)get_wchan(p),
++ (rq->niffies - p->last_ran) >> 20);
++ }
++
++ p->prio = effective_prio(p);
++ if (task_contributes_to_load(p))
++ rq->nr_uninterruptible--;
++
++ enqueue_task(rq, p, 0);
++ p->on_rq = TASK_ON_RQ_QUEUED;
++}
++
++/*
++ * deactivate_task - If it's running, it's not on the runqueue and we can just
++ * decrement the nr_running. Enter with rq locked.
++ */
++static inline void deactivate_task(struct task_struct *p, struct rq *rq)
++{
++ if (task_contributes_to_load(p))
++ rq->nr_uninterruptible++;
++
++ p->on_rq = 0;
++ sched_info_dequeued(rq, p);
++}
++
++#ifdef CONFIG_SMP
++void set_task_cpu(struct task_struct *p, unsigned int new_cpu)
++{
++ struct rq *rq;
++
++ if (task_cpu(p) == new_cpu)
++ return;
++
++ /* Do NOT call set_task_cpu on a currently queued task as we will not
++ * be reliably holding the rq lock after changing CPU. */
++ BUG_ON(task_queued(p));
++ rq = task_rq(p);
++
++#ifdef CONFIG_LOCKDEP
++ /*
++ * The caller should hold either p->pi_lock or rq->lock, when changing
++ * a task's CPU. ->pi_lock for waking tasks, rq->lock for runnable tasks.
++ *
++ * Furthermore, all task_rq users should acquire both locks, see
++ * task_rq_lock().
++ */
++ WARN_ON_ONCE(debug_locks && !(lockdep_is_held(&p->pi_lock) ||
++ lockdep_is_held(rq->lock)));
++#endif
++
++ trace_sched_migrate_task(p, new_cpu);
++ rseq_migrate(p);
++ perf_event_task_migrate(p);
++
++ /*
++ * After ->cpu is set up to a new value, task_rq_lock(p, ...) can be
++ * successfully executed on another CPU. We must ensure that updates of
++ * per-task data have been completed by this moment.
++ */
++ smp_wmb();
++
++ p->wake_cpu = new_cpu;
++
++ if (task_running(rq, p)) {
++ /*
++ * We should only be calling this on a running task if we're
++ * holding rq lock.
++ */
++ lockdep_assert_held(rq->lock);
++
++ /*
++ * We can't change the task_thread_info CPU on a running task
++ * as p will still be protected by the rq lock of the CPU it
++ * is still running on so we only set the wake_cpu for it to be
++ * lazily updated once off the CPU.
++ */
++ return;
++ }
++
++#ifdef CONFIG_THREAD_INFO_IN_TASK
++ p->cpu = new_cpu;
++#else
++ task_thread_info(p)->cpu = new_cpu;
++#endif
++ /* We're no longer protecting p after this point since we're holding
++ * the wrong runqueue lock. */
++}
++#endif /* CONFIG_SMP */
++
++/*
++ * Move a task off the runqueue and take it to a cpu for it will
++ * become the running task.
++ */
++static inline void take_task(struct rq *rq, int cpu, struct task_struct *p)
++{
++ struct rq *p_rq = task_rq(p);
++
++ dequeue_task(p_rq, p, DEQUEUE_SAVE);
++ if (p_rq != rq) {
++ sched_info_dequeued(p_rq, p);
++ sched_info_queued(rq, p);
++ }
++ set_task_cpu(p, cpu);
++}
++
++/*
++ * Returns a descheduling task to the runqueue unless it is being
++ * deactivated.
++ */
++static inline void return_task(struct task_struct *p, struct rq *rq,
++ int cpu, bool deactivate)
++{
++ if (deactivate)
++ deactivate_task(p, rq);
++ else {
++#ifdef CONFIG_SMP
++ /*
++ * set_task_cpu was called on the running task that doesn't
++ * want to deactivate so it has to be enqueued to a different
++ * CPU and we need its lock. Tag it to be moved with as the
++ * lock is dropped in finish_lock_switch.
++ */
++ if (unlikely(p->wake_cpu != cpu))
++ p->on_rq = TASK_ON_RQ_MIGRATING;
++ else
++#endif
++ enqueue_task(rq, p, ENQUEUE_RESTORE);
++ }
++}
++
++/* Enter with rq lock held. We know p is on the local cpu */
++static inline void __set_tsk_resched(struct task_struct *p)
++{
++ set_tsk_need_resched(p);
++ set_preempt_need_resched();
++}
++
++/**
++ * task_curr - is this task currently executing on a CPU?
++ * @p: the task in question.
++ *
++ * Return: 1 if the task is currently executing. 0 otherwise.
++ */
++inline int task_curr(const struct task_struct *p)
++{
++ return cpu_curr(task_cpu(p)) == p;
++}
++
++#ifdef CONFIG_SMP
++/*
++ * wait_task_inactive - wait for a thread to unschedule.
++ *
++ * If @match_state is nonzero, it's the @p->state value just checked and
++ * not expected to change. If it changes, i.e. @p might have woken up,
++ * then return zero. When we succeed in waiting for @p to be off its CPU,
++ * we return a positive number (its total switch count). If a second call
++ * a short while later returns the same number, the caller can be sure that
++ * @p has remained unscheduled the whole time.
++ *
++ * The caller must ensure that the task *will* unschedule sometime soon,
++ * else this function might spin for a *long* time. This function can't
++ * be called with interrupts off, or it may introduce deadlock with
++ * smp_call_function() if an IPI is sent by the same process we are
++ * waiting to become inactive.
++ */
++unsigned long wait_task_inactive(struct task_struct *p, long match_state)
++{
++ int running, queued;
++ unsigned long flags;
++ unsigned long ncsw;
++ struct rq *rq;
++
++ for (;;) {
++ rq = task_rq(p);
++
++ /*
++ * If the task is actively running on another CPU
++ * still, just relax and busy-wait without holding
++ * any locks.
++ *
++ * NOTE! Since we don't hold any locks, it's not
++ * even sure that "rq" stays as the right runqueue!
++ * But we don't care, since this will return false
++ * if the runqueue has changed and p is actually now
++ * running somewhere else!
++ */
++ while (task_running(rq, p)) {
++ if (match_state && unlikely(p->state != match_state))
++ return 0;
++ cpu_relax();
++ }
++
++ /*
++ * Ok, time to look more closely! We need the rq
++ * lock now, to be *sure*. If we're wrong, we'll
++ * just go back and repeat.
++ */
++ rq = task_rq_lock(p, &flags);
++ trace_sched_wait_task(p);
++ running = task_running(rq, p);
++ queued = task_on_rq_queued(p);
++ ncsw = 0;
++ if (!match_state || p->state == match_state)
++ ncsw = p->nvcsw | LONG_MIN; /* sets MSB */
++ task_rq_unlock(rq, p, &flags);
++
++ /*
++ * If it changed from the expected state, bail out now.
++ */
++ if (unlikely(!ncsw))
++ break;
++
++ /*
++ * Was it really running after all now that we
++ * checked with the proper locks actually held?
++ *
++ * Oops. Go back and try again..
++ */
++ if (unlikely(running)) {
++ cpu_relax();
++ continue;
++ }
++
++ /*
++ * It's not enough that it's not actively running,
++ * it must be off the runqueue _entirely_, and not
++ * preempted!
++ *
++ * So if it was still runnable (but just not actively
++ * running right now), it's preempted, and we should
++ * yield - it could be a while.
++ */
++ if (unlikely(queued)) {
++ ktime_t to = NSEC_PER_SEC / HZ;
++
++ set_current_state(TASK_UNINTERRUPTIBLE);
++ schedule_hrtimeout(&to, HRTIMER_MODE_REL);
++ continue;
++ }
++
++ /*
++ * Ahh, all good. It wasn't running, and it wasn't
++ * runnable, which means that it will never become
++ * running in the future either. We're all done!
++ */
++ break;
++ }
++
++ return ncsw;
++}
++
++/***
++ * kick_process - kick a running thread to enter/exit the kernel
++ * @p: the to-be-kicked thread
++ *
++ * Cause a process which is running on another CPU to enter
++ * kernel-mode, without any delay. (to get signals handled.)
++ *
++ * NOTE: this function doesn't have to take the runqueue lock,
++ * because all it wants to ensure is that the remote task enters
++ * the kernel. If the IPI races and the task has been migrated
++ * to another CPU then no harm is done and the purpose has been
++ * achieved as well.
++ */
++void kick_process(struct task_struct *p)
++{
++ int cpu;
++
++ preempt_disable();
++ cpu = task_cpu(p);
++ if ((cpu != smp_processor_id()) && task_curr(p))
++ smp_sched_reschedule(cpu);
++ preempt_enable();
++}
++EXPORT_SYMBOL_GPL(kick_process);
++#endif
++
++/*
++ * RT tasks preempt purely on priority. SCHED_NORMAL tasks preempt on the
++ * basis of earlier deadlines. SCHED_IDLEPRIO don't preempt anything else or
++ * between themselves, they cooperatively multitask. An idle rq scores as
++ * prio PRIO_LIMIT so it is always preempted.
++ */
++static inline bool
++can_preempt(struct task_struct *p, int prio, u64 deadline)
++{
++ /* Better static priority RT task or better policy preemption */
++ if (p->prio < prio)
++ return true;
++ if (p->prio > prio)
++ return false;
++ if (p->policy == SCHED_BATCH)
++ return false;
++ /* SCHED_NORMAL and ISO will preempt based on deadline */
++ if (!deadline_before(p->deadline, deadline))
++ return false;
++ return true;
++}
++
++#ifdef CONFIG_SMP
++
++static inline bool is_per_cpu_kthread(struct task_struct *p)
++{
++ if (!(p->flags & PF_KTHREAD))
++ return false;
++
++ if (p->nr_cpus_allowed != 1)
++ return false;
++
++ return true;
++}
++
++/*
++ * Per-CPU kthreads are allowed to run on !active && online CPUs, see
++ * __set_cpus_allowed_ptr().
++ */
++static inline bool is_cpu_allowed(struct task_struct *p, int cpu)
++{
++ if (!cpumask_test_cpu(cpu, &p->cpus_allowed))
++ return false;
++
++ if (is_per_cpu_kthread(p))
++ return cpu_online(cpu);
++
++ return cpu_active(cpu);
++}
++
++/*
++ * Check to see if p can run on cpu, and if not, whether there are any online
++ * CPUs it can run on instead. This only happens with the hotplug threads that
++ * bring up the CPUs.
++ */
++static inline bool sched_other_cpu(struct task_struct *p, int cpu)
++{
++ if (likely(cpumask_test_cpu(cpu, &p->cpus_allowed)))
++ return false;
++ if (p->nr_cpus_allowed == 1) {
++ cpumask_t valid_mask;
++
++ cpumask_and(&valid_mask, &p->cpus_allowed, cpu_online_mask);
++ if (unlikely(cpumask_empty(&valid_mask)))
++ return false;
++ }
++ return true;
++}
++
++static inline bool needs_other_cpu(struct task_struct *p, int cpu)
++{
++ if (cpumask_test_cpu(cpu, &p->cpus_allowed))
++ return false;
++ return true;
++}
++
++#define cpu_online_map (*(cpumask_t *)cpu_online_mask)
++
++static void try_preempt(struct task_struct *p, struct rq *this_rq)
++{
++ int i, this_entries = rq_load(this_rq);
++ cpumask_t tmp;
++
++ if (suitable_idle_cpus(p) && resched_best_idle(p, task_cpu(p)))
++ return;
++
++ /* IDLEPRIO tasks never preempt anything but idle */
++ if (p->policy == SCHED_IDLEPRIO)
++ return;
++
++ cpumask_and(&tmp, &cpu_online_map, &p->cpus_allowed);
++
++ for (i = 0; i < num_possible_cpus(); i++) {
++ struct rq *rq = this_rq->cpu_order[i];
++
++ if (!cpumask_test_cpu(rq->cpu, &tmp))
++ continue;
++
++ if (!sched_interactive && rq != this_rq && rq_load(rq) <= this_entries)
++ continue;
++ if (smt_schedule(p, rq) && can_preempt(p, rq->rq_prio, rq->rq_deadline)) {
++ /* We set rq->preempting lockless, it's a hint only */
++ rq->preempting = p;
++ resched_curr(rq);
++ return;
++ }
++ }
++}
++
++static int __set_cpus_allowed_ptr(struct task_struct *p,
++ const struct cpumask *new_mask, bool check);
++#else /* CONFIG_SMP */
++static inline bool needs_other_cpu(struct task_struct *p, int cpu)
++{
++ return false;
++}
++
++static void try_preempt(struct task_struct *p, struct rq *this_rq)
++{
++ if (p->policy == SCHED_IDLEPRIO)
++ return;
++ if (can_preempt(p, uprq->rq_prio, uprq->rq_deadline))
++ resched_curr(uprq);
++}
++
++static inline int __set_cpus_allowed_ptr(struct task_struct *p,
++ const struct cpumask *new_mask, bool check)
++{
++ return set_cpus_allowed_ptr(p, new_mask);
++}
++#endif /* CONFIG_SMP */
++
++/*
++ * wake flags
++ */
++#define WF_SYNC 0x01 /* waker goes to sleep after wakeup */
++#define WF_FORK 0x02 /* child wakeup after fork */
++#define WF_MIGRATED 0x04 /* internal use, task got migrated */
++
++static void
++ttwu_stat(struct task_struct *p, int cpu, int wake_flags)
++{
++ struct rq *rq;
++
++ if (!schedstat_enabled())
++ return;
++
++ rq = this_rq();
++
++#ifdef CONFIG_SMP
++ if (cpu == rq->cpu) {
++ __schedstat_inc(rq->ttwu_local);
++ } else {
++ struct sched_domain *sd;
++
++ rcu_read_lock();
++ for_each_domain(rq->cpu, sd) {
++ if (cpumask_test_cpu(cpu, sched_domain_span(sd))) {
++ __schedstat_inc(sd->ttwu_wake_remote);
++ break;
++ }
++ }
++ rcu_read_unlock();
++ }
++
++#endif /* CONFIG_SMP */
++
++ __schedstat_inc(rq->ttwu_count);
++}
++
++static inline void ttwu_activate(struct rq *rq, struct task_struct *p)
++{
++ activate_task(p, rq);
++
++ /* if a worker is waking up, notify the workqueue */
++ if (p->flags & PF_WQ_WORKER)
++ wq_worker_waking_up(p, cpu_of(rq));
++}
++
++/*
++ * Mark the task runnable and perform wakeup-preemption.
++ */
++static void ttwu_do_wakeup(struct rq *rq, struct task_struct *p, int wake_flags)
++{
++ /*
++ * Sync wakeups (i.e. those types of wakeups where the waker
++ * has indicated that it will leave the CPU in short order)
++ * don't trigger a preemption if there are no idle cpus,
++ * instead waiting for current to deschedule.
++ */
++ if (wake_flags & WF_SYNC)
++ resched_suitable_idle(p);
++ else
++ try_preempt(p, rq);
++ p->state = TASK_RUNNING;
++ trace_sched_wakeup(p);
++}
++
++static void
++ttwu_do_activate(struct rq *rq, struct task_struct *p, int wake_flags)
++{
++ lockdep_assert_held(rq->lock);
++
++#ifdef CONFIG_SMP
++ if (p->sched_contributes_to_load)
++ rq->nr_uninterruptible--;
++#endif
++
++ ttwu_activate(rq, p);
++ ttwu_do_wakeup(rq, p, wake_flags);
++}
++
++/*
++ * Called in case the task @p isn't fully descheduled from its runqueue,
++ * in this case we must do a remote wakeup. Its a 'light' wakeup though,
++ * since all we need to do is flip p->state to TASK_RUNNING, since
++ * the task is still ->on_rq.
++ */
++static int ttwu_remote(struct task_struct *p, int wake_flags)
++{
++ struct rq *rq;
++ int ret = 0;
++
++ rq = __task_rq_lock(p);
++ if (likely(task_on_rq_queued(p))) {
++ ttwu_do_wakeup(rq, p, wake_flags);
++ ret = 1;
++ }
++ __task_rq_unlock(rq);
++
++ return ret;
++}
++
++#ifdef CONFIG_SMP
++void sched_ttwu_pending(void)
++{
++ struct rq *rq = this_rq();
++ struct llist_node *llist = llist_del_all(&rq->wake_list);
++ struct task_struct *p, *t;
++ unsigned long flags;
++
++ if (!llist)
++ return;
++
++ rq_lock_irqsave(rq, &flags);
++
++ llist_for_each_entry_safe(p, t, llist, wake_entry)
++ ttwu_do_activate(rq, p, 0);
++
++ rq_unlock_irqrestore(rq, &flags);
++}
++
++void scheduler_ipi(void)
++{
++ /*
++ * Fold TIF_NEED_RESCHED into the preempt_count; anybody setting
++ * TIF_NEED_RESCHED remotely (for the first time) will also send
++ * this IPI.
++ */
++ preempt_fold_need_resched();
++
++ if (llist_empty(&this_rq()->wake_list) && (!idle_cpu(smp_processor_id()) || need_resched()))
++ return;
++
++ /*
++ * Not all reschedule IPI handlers call irq_enter/irq_exit, since
++ * traditionally all their work was done from the interrupt return
++ * path. Now that we actually do some work, we need to make sure
++ * we do call them.
++ *
++ * Some archs already do call them, luckily irq_enter/exit nest
++ * properly.
++ *
++ * Arguably we should visit all archs and update all handlers,
++ * however a fair share of IPIs are still resched only so this would
++ * somewhat pessimize the simple resched case.
++ */
++ irq_enter();
++ sched_ttwu_pending();
++ irq_exit();
++}
++
++static void ttwu_queue_remote(struct task_struct *p, int cpu, int wake_flags)
++{
++ struct rq *rq = cpu_rq(cpu);
++
++ if (llist_add(&p->wake_entry, &cpu_rq(cpu)->wake_list)) {
++ if (!set_nr_if_polling(rq->idle))
++ smp_sched_reschedule(cpu);
++ else
++ trace_sched_wake_idle_without_ipi(cpu);
++ }
++}
++
++void wake_up_if_idle(int cpu)
++{
++ struct rq *rq = cpu_rq(cpu);
++ unsigned long flags;
++
++ rcu_read_lock();
++
++ if (!is_idle_task(rcu_dereference(rq->curr)))
++ goto out;
++
++ if (set_nr_if_polling(rq->idle)) {
++ trace_sched_wake_idle_without_ipi(cpu);
++ } else {
++ rq_lock_irqsave(rq, &flags);
++ if (likely(is_idle_task(rq->curr)))
++ smp_sched_reschedule(cpu);
++ /* Else cpu is not in idle, do nothing here */
++ rq_unlock_irqrestore(rq, &flags);
++ }
++
++out:
++ rcu_read_unlock();
++}
++
++static int valid_task_cpu(struct task_struct *p)
++{
++ cpumask_t valid_mask;
++
++ if (p->flags & PF_KTHREAD)
++ cpumask_and(&valid_mask, &p->cpus_allowed, cpu_all_mask);
++ else
++ cpumask_and(&valid_mask, &p->cpus_allowed, cpu_active_mask);
++
++ if (unlikely(!cpumask_weight(&valid_mask))) {
++ /* We shouldn't be hitting this any more */
++ printk(KERN_WARNING "SCHED: No cpumask for %s/%d weight %d\n", p->comm,
++ p->pid, cpumask_weight(&p->cpus_allowed));
++ return cpumask_any(&p->cpus_allowed);
++ }
++ return cpumask_any(&valid_mask);
++}
++
++/*
++ * For a task that's just being woken up we have a valuable balancing
++ * opportunity so choose the nearest cache most lightly loaded runqueue.
++ * Entered with rq locked and returns with the chosen runqueue locked.
++ */
++static inline int select_best_cpu(struct task_struct *p)
++{
++ unsigned int idlest = ~0U;
++ struct rq *rq = NULL;
++ int i;
++
++ if (suitable_idle_cpus(p)) {
++ int cpu = task_cpu(p);
++
++ if (unlikely(needs_other_cpu(p, cpu)))
++ cpu = valid_task_cpu(p);
++ rq = resched_best_idle(p, cpu);
++ if (likely(rq))
++ return rq->cpu;
++ }
++
++ for (i = 0; i < num_possible_cpus(); i++) {
++ struct rq *other_rq = task_rq(p)->cpu_order[i];
++ int entries;
++
++ if (!other_rq->online)
++ continue;
++ if (needs_other_cpu(p, other_rq->cpu))
++ continue;
++ entries = rq_load(other_rq);
++ if (entries >= idlest)
++ continue;
++ idlest = entries;
++ rq = other_rq;
++ }
++ if (unlikely(!rq))
++ return task_cpu(p);
++ return rq->cpu;
++}
++#else /* CONFIG_SMP */
++static int valid_task_cpu(struct task_struct *p)
++{
++ return 0;
++}
++
++static inline int select_best_cpu(struct task_struct *p)
++{
++ return 0;
++}
++
++static struct rq *resched_best_idle(struct task_struct *p, int cpu)
++{
++ return NULL;
++}
++#endif /* CONFIG_SMP */
++
++static void ttwu_queue(struct task_struct *p, int cpu, int wake_flags)
++{
++ struct rq *rq = cpu_rq(cpu);
++
++#if defined(CONFIG_SMP)
++ if (!cpus_share_cache(smp_processor_id(), cpu)) {
++ sched_clock_cpu(cpu); /* Sync clocks across CPUs */
++ ttwu_queue_remote(p, cpu, wake_flags);
++ return;
++ }
++#endif
++ rq_lock(rq);
++ ttwu_do_activate(rq, p, wake_flags);
++ rq_unlock(rq);
++}
++
++/***
++ * try_to_wake_up - wake up a thread
++ * @p: the thread to be awakened
++ * @state: the mask of task states that can be woken
++ * @wake_flags: wake modifier flags (WF_*)
++ *
++ * Put it on the run-queue if it's not already there. The "current"
++ * thread is always on the run-queue (except when the actual
++ * re-schedule is in progress), and as such you're allowed to do
++ * the simpler "current->state = TASK_RUNNING" to mark yourself
++ * runnable without the overhead of this.
++ *
++ * Return: %true if @p was woken up, %false if it was already running.
++ * or @state didn't match @p's state.
++ */
++static int
++try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags)
++{
++ unsigned long flags;
++ int cpu, success = 0;
++
++ /*
++ * If we are going to wake up a thread waiting for CONDITION we
++ * need to ensure that CONDITION=1 done by the caller can not be
++ * reordered with p->state check below. This pairs with mb() in
++ * set_current_state() the waiting thread does.
++ */
++ raw_spin_lock_irqsave(&p->pi_lock, flags);
++ smp_mb__after_spinlock();
++ /* state is a volatile long, どうして、分からない */
++ if (!((unsigned int)p->state & state))
++ goto out;
++
++ trace_sched_waking(p);
++
++ /* We're going to change ->state: */
++ success = 1;
++ cpu = task_cpu(p);
++
++ /*
++ * Ensure we load p->on_rq _after_ p->state, otherwise it would
++ * be possible to, falsely, observe p->on_rq == 0 and get stuck
++ * in smp_cond_load_acquire() below.
++ *
++ * sched_ttwu_pending() try_to_wake_up()
++ * STORE p->on_rq = 1 LOAD p->state
++ * UNLOCK rq->lock
++ *
++ * __schedule() (switch to task 'p')
++ * LOCK rq->lock smp_rmb();
++ * smp_mb__after_spinlock();
++ * UNLOCK rq->lock
++ *
++ * [task p]
++ * STORE p->state = UNINTERRUPTIBLE LOAD p->on_rq
++ *
++ * Pairs with the LOCK+smp_mb__after_spinlock() on rq->lock in
++ * __schedule(). See the comment for smp_mb__after_spinlock().
++ */
++ smp_rmb();
++ if (p->on_rq && ttwu_remote(p, wake_flags))
++ goto stat;
++
++#ifdef CONFIG_SMP
++ /*
++ * Ensure we load p->on_cpu _after_ p->on_rq, otherwise it would be
++ * possible to, falsely, observe p->on_cpu == 0.
++ *
++ * One must be running (->on_cpu == 1) in order to remove oneself
++ * from the runqueue.
++ *
++ * __schedule() (switch to task 'p') try_to_wake_up()
++ * STORE p->on_cpu = 1 LOAD p->on_rq
++ * UNLOCK rq->lock
++ *
++ * __schedule() (put 'p' to sleep)
++ * LOCK rq->lock smp_rmb();
++ * smp_mb__after_spinlock();
++ * STORE p->on_rq = 0 LOAD p->on_cpu
++ *
++ * Pairs with the LOCK+smp_mb__after_spinlock() on rq->lock in
++ * __schedule(). See the comment for smp_mb__after_spinlock().
++ */
++ smp_rmb();
++
++ /*
++ * If the owning (remote) CPU is still in the middle of schedule() with
++ * this task as prev, wait until its done referencing the task.
++ *
++ * Pairs with the smp_store_release() in finish_task().
++ *
++ * This ensures that tasks getting woken will be fully ordered against
++ * their previous state and preserve Program Order.
++ */
++ smp_cond_load_acquire(&p->on_cpu, !VAL);
++
++ p->sched_contributes_to_load = !!task_contributes_to_load(p);
++ p->state = TASK_WAKING;
++
++ if (p->in_iowait) {
++ delayacct_blkio_end(p);
++ atomic_dec(&task_rq(p)->nr_iowait);
++ }
++
++ cpu = select_best_cpu(p);
++ if (task_cpu(p) != cpu)
++ set_task_cpu(p, cpu);
++
++#else /* CONFIG_SMP */
++
++ if (p->in_iowait) {
++ delayacct_blkio_end(p);
++ atomic_dec(&task_rq(p)->nr_iowait);
++ }
++
++#endif /* CONFIG_SMP */
++
++ ttwu_queue(p, cpu, wake_flags);
++stat:
++ ttwu_stat(p, cpu, wake_flags);
++out:
++ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
++
++ return success;
++}
++
++/**
++ * try_to_wake_up_local - try to wake up a local task with rq lock held
++ * @p: the thread to be awakened
++ *
++ * Put @p on the run-queue if it's not already there. The caller must
++ * ensure that rq is locked and, @p is not the current task.
++ * rq stays locked over invocation.
++ */
++static void try_to_wake_up_local(struct task_struct *p)
++{
++ struct rq *rq = task_rq(p);
++
++ if (WARN_ON_ONCE(rq != this_rq()) ||
++ WARN_ON_ONCE(p == current))
++ return;
++
++ lockdep_assert_held(rq->lock);
++
++ if (!raw_spin_trylock(&p->pi_lock)) {
++ /*
++ * This is OK, because current is on_cpu, which avoids it being
++ * picked for load-balance and preemption/IRQs are still
++ * disabled avoiding further scheduler activity on it and we've
++ * not yet picked a replacement task.
++ */
++ rq_unlock(rq);
++ raw_spin_lock(&p->pi_lock);
++ rq_lock(rq);
++ }
++
++ if (!(p->state & TASK_NORMAL))
++ goto out;
++
++ trace_sched_waking(p);
++
++ if (!task_on_rq_queued(p)) {
++ if (p->in_iowait) {
++ delayacct_blkio_end(p);
++ atomic_dec(&rq->nr_iowait);
++ }
++ ttwu_activate(rq, p);
++ }
++
++ ttwu_do_wakeup(rq, p, 0);
++ ttwu_stat(p, smp_processor_id(), 0);
++out:
++ raw_spin_unlock(&p->pi_lock);
++}
++
++/**
++ * wake_up_process - Wake up a specific process
++ * @p: The process to be woken up.
++ *
++ * Attempt to wake up the nominated process and move it to the set of runnable
++ * processes.
++ *
++ * Return: 1 if the process was woken up, 0 if it was already running.
++ *
++ * This function executes a full memory barrier before accessing the task state.
++ */
++int wake_up_process(struct task_struct *p)
++{
++ return try_to_wake_up(p, TASK_NORMAL, 0);
++}
++EXPORT_SYMBOL(wake_up_process);
++
++int wake_up_state(struct task_struct *p, unsigned int state)
++{
++ return try_to_wake_up(p, state, 0);
++}
++
++static void time_slice_expired(struct task_struct *p, struct rq *rq);
++
++/*
++ * Perform scheduler related setup for a newly forked process p.
++ * p is forked by current.
++ */
++int sched_fork(unsigned long __maybe_unused clone_flags, struct task_struct *p)
++{
++ unsigned long flags;
++
++#ifdef CONFIG_PREEMPT_NOTIFIERS
++ INIT_HLIST_HEAD(&p->preempt_notifiers);
++#endif
++ /*
++ * We mark the process as NEW here. This guarantees that
++ * nobody will actually run it, and a signal or other external
++ * event cannot wake it up and insert it on the runqueue either.
++ */
++ p->state = TASK_NEW;
++
++ /*
++ * The process state is set to the same value of the process executing
++ * do_fork() code. That is running. This guarantees that nobody will
++ * actually run it, and a signal or other external event cannot wake
++ * it up and insert it on the runqueue either.
++ */
++
++ /* Should be reset in fork.c but done here for ease of MuQSS patching */
++ p->on_cpu =
++ p->on_rq =
++ p->utime =
++ p->stime =
++ p->sched_time =
++ p->stime_ns =
++ p->utime_ns = 0;
++ skiplist_node_init(&p->node);
++
++ /*
++ * Revert to default priority/policy on fork if requested.
++ */
++ if (unlikely(p->sched_reset_on_fork)) {
++ if (p->policy == SCHED_FIFO || p->policy == SCHED_RR) {
++ p->policy = SCHED_NORMAL;
++ p->normal_prio = normal_prio(p);
++ }
++
++ if (PRIO_TO_NICE(p->static_prio) < 0) {
++ p->static_prio = NICE_TO_PRIO(0);
++ p->normal_prio = p->static_prio;
++ }
++
++ /*
++ * We don't need the reset flag anymore after the fork. It has
++ * fulfilled its duty:
++ */
++ p->sched_reset_on_fork = 0;
++ }
++
++ /*
++ * Silence PROVE_RCU.
++ */
++ raw_spin_lock_irqsave(&p->pi_lock, flags);
++ set_task_cpu(p, smp_processor_id());
++ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
++
++#ifdef CONFIG_SCHED_INFO
++ if (unlikely(sched_info_on()))
++ memset(&p->sched_info, 0, sizeof(p->sched_info));
++#endif
++ init_task_preempt_count(p);
++
++ return 0;
++}
++
++#ifdef CONFIG_SCHEDSTATS
++
++DEFINE_STATIC_KEY_FALSE(sched_schedstats);
++static bool __initdata __sched_schedstats = false;
++
++static void set_schedstats(bool enabled)
++{
++ if (enabled)
++ static_branch_enable(&sched_schedstats);
++ else
++ static_branch_disable(&sched_schedstats);
++}
++
++void force_schedstat_enabled(void)
++{
++ if (!schedstat_enabled()) {
++ pr_info("kernel profiling enabled schedstats, disable via kernel.sched_schedstats.\n");
++ static_branch_enable(&sched_schedstats);
++ }
++}
++
++static int __init setup_schedstats(char *str)
++{
++ int ret = 0;
++ if (!str)
++ goto out;
++
++ /*
++ * This code is called before jump labels have been set up, so we can't
++ * change the static branch directly just yet. Instead set a temporary
++ * variable so init_schedstats() can do it later.
++ */
++ if (!strcmp(str, "enable")) {
++ __sched_schedstats = true;
++ ret = 1;
++ } else if (!strcmp(str, "disable")) {
++ __sched_schedstats = false;
++ ret = 1;
++ }
++out:
++ if (!ret)
++ pr_warn("Unable to parse schedstats=\n");
++
++ return ret;
++}
++__setup("schedstats=", setup_schedstats);
++
++static void __init init_schedstats(void)
++{
++ set_schedstats(__sched_schedstats);
++}
++
++#ifdef CONFIG_PROC_SYSCTL
++int sysctl_schedstats(struct ctl_table *table, int write,
++ void __user *buffer, size_t *lenp, loff_t *ppos)
++{
++ struct ctl_table t;
++ int err;
++ int state = static_branch_likely(&sched_schedstats);
++
++ if (write && !capable(CAP_SYS_ADMIN))
++ return -EPERM;
++
++ t = *table;
++ t.data = &state;
++ err = proc_dointvec_minmax(&t, write, buffer, lenp, ppos);
++ if (err < 0)
++ return err;
++ if (write)
++ set_schedstats(state);
++ return err;
++}
++#endif /* CONFIG_PROC_SYSCTL */
++#else /* !CONFIG_SCHEDSTATS */
++static inline void init_schedstats(void) {}
++#endif /* CONFIG_SCHEDSTATS */
++
++static void update_cpu_clock_switch(struct rq *rq, struct task_struct *p);
++
++static void account_task_cpu(struct rq *rq, struct task_struct *p)
++{
++ update_clocks(rq);
++ /* This isn't really a context switch but accounting is the same */
++ update_cpu_clock_switch(rq, p);
++ p->last_ran = rq->niffies;
++}
++
++bool sched_smp_initialized __read_mostly;
++
++static inline int hrexpiry_enabled(struct rq *rq)
++{
++ if (unlikely(!cpu_active(cpu_of(rq)) || !sched_smp_initialized))
++ return 0;
++ return hrtimer_is_hres_active(&rq->hrexpiry_timer);
++}
++
++/*
++ * Use HR-timers to deliver accurate preemption points.
++ */
++static inline void hrexpiry_clear(struct rq *rq)
++{
++ if (!hrexpiry_enabled(rq))
++ return;
++ if (hrtimer_active(&rq->hrexpiry_timer))
++ hrtimer_cancel(&rq->hrexpiry_timer);
++}
++
++/*
++ * High-resolution time_slice expiry.
++ * Runs from hardirq context with interrupts disabled.
++ */
++static enum hrtimer_restart hrexpiry(struct hrtimer *timer)
++{
++ struct rq *rq = container_of(timer, struct rq, hrexpiry_timer);
++ struct task_struct *p;
++
++ /* This can happen during CPU hotplug / resume */
++ if (unlikely(cpu_of(rq) != smp_processor_id()))
++ goto out;
++
++ /*
++ * We're doing this without the runqueue lock but this should always
++ * be run on the local CPU. Time slice should run out in __schedule
++ * but we set it to zero here in case niffies is slightly less.
++ */
++ p = rq->curr;
++ p->time_slice = 0;
++ __set_tsk_resched(p);
++out:
++ return HRTIMER_NORESTART;
++}
++
++/*
++ * Called to set the hrexpiry timer state.
++ *
++ * called with irqs disabled from the local CPU only
++ */
++static void hrexpiry_start(struct rq *rq, u64 delay)
++{
++ if (!hrexpiry_enabled(rq))
++ return;
++
++ hrtimer_start(&rq->hrexpiry_timer, ns_to_ktime(delay),
++ HRTIMER_MODE_REL_PINNED);
++}
++
++static void init_rq_hrexpiry(struct rq *rq)
++{
++ hrtimer_init(&rq->hrexpiry_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
++ rq->hrexpiry_timer.function = hrexpiry;
++}
++
++static inline int rq_dither(struct rq *rq)
++{
++ if (!hrexpiry_enabled(rq))
++ return HALF_JIFFY_US;
++ return 0;
++}
++
++/*
++ * wake_up_new_task - wake up a newly created task for the first time.
++ *
++ * This function will do some initial scheduler statistics housekeeping
++ * that must be done for every newly created context, then puts the task
++ * on the runqueue and wakes it.
++ */
++void wake_up_new_task(struct task_struct *p)
++{
++ struct task_struct *parent, *rq_curr;
++ struct rq *rq, *new_rq;
++ unsigned long flags;
++
++ parent = p->parent;
++
++ raw_spin_lock_irqsave(&p->pi_lock, flags);
++ p->state = TASK_RUNNING;
++ /* Task_rq can't change yet on a new task */
++ new_rq = rq = task_rq(p);
++ if (unlikely(needs_other_cpu(p, task_cpu(p)))) {
++ set_task_cpu(p, valid_task_cpu(p));
++ new_rq = task_rq(p);
++ }
++
++ double_rq_lock(rq, new_rq);
++ rq_curr = rq->curr;
++
++ /*
++ * Make sure we do not leak PI boosting priority to the child.
++ */
++ p->prio = rq_curr->normal_prio;
++
++ trace_sched_wakeup_new(p);
++
++ /*
++ * Share the timeslice between parent and child, thus the
++ * total amount of pending timeslices in the system doesn't change,
++ * resulting in more scheduling fairness. If it's negative, it won't
++ * matter since that's the same as being 0. rq->rq_deadline is only
++ * modified within schedule() so it is always equal to
++ * current->deadline.
++ */
++ account_task_cpu(rq, rq_curr);
++ p->last_ran = rq_curr->last_ran;
++ if (likely(rq_curr->policy != SCHED_FIFO)) {
++ rq_curr->time_slice /= 2;
++ if (rq_curr->time_slice < RESCHED_US) {
++ /*
++ * Forking task has run out of timeslice. Reschedule it and
++ * start its child with a new time slice and deadline. The
++ * child will end up running first because its deadline will
++ * be slightly earlier.
++ */
++ __set_tsk_resched(rq_curr);
++ time_slice_expired(p, new_rq);
++ if (suitable_idle_cpus(p))
++ resched_best_idle(p, task_cpu(p));
++ else if (unlikely(rq != new_rq))
++ try_preempt(p, new_rq);
++ } else {
++ p->time_slice = rq_curr->time_slice;
++ if (rq_curr == parent && rq == new_rq && !suitable_idle_cpus(p)) {
++ /*
++ * The VM isn't cloned, so we're in a good position to
++ * do child-runs-first in anticipation of an exec. This
++ * usually avoids a lot of COW overhead.
++ */
++ __set_tsk_resched(rq_curr);
++ } else {
++ /*
++ * Adjust the hrexpiry since rq_curr will keep
++ * running and its timeslice has been shortened.
++ */
++ hrexpiry_start(rq, US_TO_NS(rq_curr->time_slice));
++ try_preempt(p, new_rq);
++ }
++ }
++ } else {
++ time_slice_expired(p, new_rq);
++ try_preempt(p, new_rq);
++ }
++ activate_task(p, new_rq);
++ double_rq_unlock(rq, new_rq);
++ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
++}
++
++#ifdef CONFIG_PREEMPT_NOTIFIERS
++
++static DEFINE_STATIC_KEY_FALSE(preempt_notifier_key);
++
++void preempt_notifier_inc(void)
++{
++ static_branch_inc(&preempt_notifier_key);
++}
++EXPORT_SYMBOL_GPL(preempt_notifier_inc);
++
++void preempt_notifier_dec(void)
++{
++ static_branch_dec(&preempt_notifier_key);
++}
++EXPORT_SYMBOL_GPL(preempt_notifier_dec);
++
++/**
++ * preempt_notifier_register - tell me when current is being preempted & rescheduled
++ * @notifier: notifier struct to register
++ */
++void preempt_notifier_register(struct preempt_notifier *notifier)
++{
++ if (!static_branch_unlikely(&preempt_notifier_key))
++ WARN(1, "registering preempt_notifier while notifiers disabled\n");
++
++ hlist_add_head(&notifier->link, &current->preempt_notifiers);
++}
++EXPORT_SYMBOL_GPL(preempt_notifier_register);
++
++/**
++ * preempt_notifier_unregister - no longer interested in preemption notifications
++ * @notifier: notifier struct to unregister
++ *
++ * This is *not* safe to call from within a preemption notifier.
++ */
++void preempt_notifier_unregister(struct preempt_notifier *notifier)
++{
++ hlist_del(&notifier->link);
++}
++EXPORT_SYMBOL_GPL(preempt_notifier_unregister);
++
++static void __fire_sched_in_preempt_notifiers(struct task_struct *curr)
++{
++ struct preempt_notifier *notifier;
++
++ hlist_for_each_entry(notifier, &curr->preempt_notifiers, link)
++ notifier->ops->sched_in(notifier, raw_smp_processor_id());
++}
++
++static __always_inline void fire_sched_in_preempt_notifiers(struct task_struct *curr)
++{
++ if (static_branch_unlikely(&preempt_notifier_key))
++ __fire_sched_in_preempt_notifiers(curr);
++}
++
++static void
++__fire_sched_out_preempt_notifiers(struct task_struct *curr,
++ struct task_struct *next)
++{
++ struct preempt_notifier *notifier;
++
++ hlist_for_each_entry(notifier, &curr->preempt_notifiers, link)
++ notifier->ops->sched_out(notifier, next);
++}
++
++static __always_inline void
++fire_sched_out_preempt_notifiers(struct task_struct *curr,
++ struct task_struct *next)
++{
++ if (static_branch_unlikely(&preempt_notifier_key))
++ __fire_sched_out_preempt_notifiers(curr, next);
++}
++
++#else /* !CONFIG_PREEMPT_NOTIFIERS */
++
++static inline void fire_sched_in_preempt_notifiers(struct task_struct *curr)
++{
++}
++
++static inline void
++fire_sched_out_preempt_notifiers(struct task_struct *curr,
++ struct task_struct *next)
++{
++}
++
++#endif /* CONFIG_PREEMPT_NOTIFIERS */
++
++static inline void prepare_task(struct task_struct *next)
++{
++ /*
++ * Claim the task as running, we do this before switching to it
++ * such that any running task will have this set.
++ */
++ next->on_cpu = 1;
++}
++
++static inline void finish_task(struct task_struct *prev)
++{
++#ifdef CONFIG_SMP
++ /*
++ * After ->on_cpu is cleared, the task can be moved to a different CPU.
++ * We must ensure this doesn't happen until the switch is completely
++ * finished.
++ *
++ * In particular, the load of prev->state in finish_task_switch() must
++ * happen before this.
++ *
++ * Pairs with the smp_cond_load_acquire() in try_to_wake_up().
++ */
++ smp_store_release(&prev->on_cpu, 0);
++#endif
++}
++
++static inline void
++prepare_lock_switch(struct rq *rq, struct task_struct *next)
++{
++ /*
++ * Since the runqueue lock will be released by the next
++ * task (which is an invalid locking op but in the case
++ * of the scheduler it's an obvious special-case), so we
++ * do an early lockdep release here:
++ */
++ spin_release(&rq->lock.dep_map, 1, _THIS_IP_);
++#ifdef CONFIG_DEBUG_SPINLOCK
++ /* this is a valid case when another task releases the spinlock */
++ rq->lock.owner = next;
++#endif
++}
++
++static inline void finish_lock_switch(struct rq *rq, struct task_struct *prev)
++{
++ /*
++ * If we are tracking spinlock dependencies then we have to
++ * fix up the runqueue lock - which gets 'carried over' from
++ * prev into current:
++ */
++ spin_acquire(&rq->lock.dep_map, 0, 0, _THIS_IP_);
++
++#ifdef CONFIG_SMP
++ /*
++ * If prev was marked as migrating to another CPU in return_task, drop
++ * the local runqueue lock but leave interrupts disabled and grab the
++ * remote lock we're migrating it to before enabling them.
++ */
++ if (unlikely(task_on_rq_migrating(prev))) {
++ sched_info_dequeued(rq, prev);
++ /*
++ * We move the ownership of prev to the new cpu now. ttwu can't
++ * activate prev to the wrong cpu since it has to grab this
++ * runqueue in ttwu_remote.
++ */
++#ifdef CONFIG_THREAD_INFO_IN_TASK
++ prev->cpu = prev->wake_cpu;
++#else
++ task_thread_info(prev)->cpu = prev->wake_cpu;
++#endif
++ raw_spin_unlock(rq->lock);
++
++ raw_spin_lock(&prev->pi_lock);
++ rq = __task_rq_lock(prev);
++ /* Check that someone else hasn't already queued prev */
++ if (likely(!task_queued(prev))) {
++ enqueue_task(rq, prev, 0);
++ prev->on_rq = TASK_ON_RQ_QUEUED;
++ /* Wake up the CPU if it's not already running */
++ resched_if_idle(rq);
++ }
++ raw_spin_unlock(&prev->pi_lock);
++ }
++#endif
++ rq_unlock(rq);
++
++ do_pending_softirq(rq, current);
++
++ local_irq_enable();
++}
++
++#ifndef prepare_arch_switch
++# define prepare_arch_switch(next) do { } while (0)
++#endif
++#ifndef finish_arch_switch
++# define finish_arch_switch(prev) do { } while (0)
++#endif
++#ifndef finish_arch_post_lock_switch
++# define finish_arch_post_lock_switch() do { } while (0)
++#endif
++
++/**
++ * prepare_task_switch - prepare to switch tasks
++ * @rq: the runqueue preparing to switch
++ * @next: the task we are going to switch to.
++ *
++ * This is called with the rq lock held and interrupts off. It must
++ * be paired with a subsequent finish_task_switch after the context
++ * switch.
++ *
++ * prepare_task_switch sets up locking and calls architecture specific
++ * hooks.
++ */
++static inline void
++prepare_task_switch(struct rq *rq, struct task_struct *prev,
++ struct task_struct *next)
++{
++ kcov_prepare_switch(prev);
++ sched_info_switch(rq, prev, next);
++ perf_event_task_sched_out(prev, next);
++ rseq_preempt(prev);
++ fire_sched_out_preempt_notifiers(prev, next);
++ prepare_task(next);
++ prepare_arch_switch(next);
++}
++
++/**
++ * finish_task_switch - clean up after a task-switch
++ * @rq: runqueue associated with task-switch
++ * @prev: the thread we just switched away from.
++ *
++ * finish_task_switch must be called after the context switch, paired
++ * with a prepare_task_switch call before the context switch.
++ * finish_task_switch will reconcile locking set up by prepare_task_switch,
++ * and do any other architecture-specific cleanup actions.
++ *
++ * Note that we may have delayed dropping an mm in context_switch(). If
++ * so, we finish that here outside of the runqueue lock. (Doing it
++ * with the lock held can cause deadlocks; see schedule() for
++ * details.)
++ *
++ * The context switch have flipped the stack from under us and restored the
++ * local variables which were saved when this task called schedule() in the
++ * past. prev == current is still correct but we need to recalculate this_rq
++ * because prev may have moved to another CPU.
++ */
++static void finish_task_switch(struct task_struct *prev)
++ __releases(rq->lock)
++{
++ struct rq *rq = this_rq();
++ struct mm_struct *mm = rq->prev_mm;
++ long prev_state;
++
++ /*
++ * The previous task will have left us with a preempt_count of 2
++ * because it left us after:
++ *
++ * schedule()
++ * preempt_disable(); // 1
++ * __schedule()
++ * raw_spin_lock_irq(rq->lock) // 2
++ *
++ * Also, see FORK_PREEMPT_COUNT.
++ */
++ if (WARN_ONCE(preempt_count() != 2*PREEMPT_DISABLE_OFFSET,
++ "corrupted preempt_count: %s/%d/0x%x\n",
++ current->comm, current->pid, preempt_count()))
++ preempt_count_set(FORK_PREEMPT_COUNT);
++
++ rq->prev_mm = NULL;
++
++ /*
++ * A task struct has one reference for the use as "current".
++ * If a task dies, then it sets TASK_DEAD in tsk->state and calls
++ * schedule one last time. The schedule call will never return, and
++ * the scheduled task must drop that reference.
++ *
++ * We must observe prev->state before clearing prev->on_cpu (in
++ * finish_task), otherwise a concurrent wakeup can get prev
++ * running on another CPU and we could rave with its RUNNING -> DEAD
++ * transition, resulting in a double drop.
++ */
++ prev_state = prev->state;
++ vtime_task_switch(prev);
++ perf_event_task_sched_in(prev, current);
++ finish_task(prev);
++ finish_lock_switch(rq, prev);
++ finish_arch_post_lock_switch();
++ kcov_finish_switch(current);
++
++ fire_sched_in_preempt_notifiers(current);
++ /*
++ * When switching through a kernel thread, the loop in
++ * membarrier_{private,global}_expedited() may have observed that
++ * kernel thread and not issued an IPI. It is therefore possible to
++ * schedule between user->kernel->user threads without passing though
++ * switch_mm(). Membarrier requires a barrier after storing to
++ * rq->curr, before returning to userspace, so provide them here:
++ *
++ * - a full memory barrier for {PRIVATE,GLOBAL}_EXPEDITED, implicitly
++ * provided by mmdrop(),
++ * - a sync_core for SYNC_CORE.
++ */
++ if (mm) {
++ membarrier_mm_sync_core_before_usermode(mm);
++ mmdrop(mm);
++ }
++ if (unlikely(prev_state == TASK_DEAD)) {
++ /*
++ * Remove function-return probe instances associated with this
++ * task and put them back on the free list.
++ */
++ kprobe_flush_task(prev);
++
++ /* Task is done with its stack. */
++ put_task_stack(prev);
++
++ put_task_struct(prev);
++ }
++}
++
++/**
++ * schedule_tail - first thing a freshly forked thread must call.
++ * @prev: the thread we just switched away from.
++ */
++asmlinkage __visible void schedule_tail(struct task_struct *prev)
++{
++ /*
++ * New tasks start with FORK_PREEMPT_COUNT, see there and
++ * finish_task_switch() for details.
++ *
++ * finish_task_switch() will drop rq->lock() and lower preempt_count
++ * and the preempt_enable() will end up enabling preemption (on
++ * PREEMPT_COUNT kernels).
++ */
++
++ finish_task_switch(prev);
++ preempt_enable();
++
++ if (current->set_child_tid)
++ put_user(task_pid_vnr(current), current->set_child_tid);
++
++ calculate_sigpending();
++}
++
++/*
++ * context_switch - switch to the new MM and the new thread's register state.
++ */
++static __always_inline void
++context_switch(struct rq *rq, struct task_struct *prev,
++ struct task_struct *next)
++{
++ struct mm_struct *mm, *oldmm;
++
++ prepare_task_switch(rq, prev, next);
++
++ mm = next->mm;
++ oldmm = prev->active_mm;
++ /*
++ * For paravirt, this is coupled with an exit in switch_to to
++ * combine the page table reload and the switch backend into
++ * one hypercall.
++ */
++ arch_start_context_switch(prev);
++
++ /*
++ * If mm is non-NULL, we pass through switch_mm(). If mm is
++ * NULL, we will pass through mmdrop() in finish_task_switch().
++ * Both of these contain the full memory barrier required by
++ * membarrier after storing to rq->curr, before returning to
++ * user-space.
++ */
++ if (!mm) {
++ next->active_mm = oldmm;
++ mmgrab(oldmm);
++ enter_lazy_tlb(oldmm, next);
++ } else
++ switch_mm_irqs_off(oldmm, mm, next);
++
++ if (!prev->mm) {
++ prev->active_mm = NULL;
++ rq->prev_mm = oldmm;
++ }
++ prepare_lock_switch(rq, next);
++
++ /* Here we just switch the register state and the stack. */
++ switch_to(prev, next, prev);
++ barrier();
++
++ finish_task_switch(prev);
++}
++
++/*
++ * nr_running, nr_uninterruptible and nr_context_switches:
++ *
++ * externally visible scheduler statistics: current number of runnable
++ * threads, total number of context switches performed since bootup.
++ */
++unsigned long nr_running(void)
++{
++ unsigned long i, sum = 0;
++
++ for_each_online_cpu(i)
++ sum += cpu_rq(i)->nr_running;
++
++ return sum;
++}
++
++static unsigned long nr_uninterruptible(void)
++{
++ unsigned long i, sum = 0;
++
++ for_each_online_cpu(i)
++ sum += cpu_rq(i)->nr_uninterruptible;
++
++ return sum;
++}
++
++/*
++ * Check if only the current task is running on the CPU.
++ *
++ * Caution: this function does not check that the caller has disabled
++ * preemption, thus the result might have a time-of-check-to-time-of-use
++ * race. The caller is responsible to use it correctly, for example:
++ *
++ * - from a non-preemptable section (of course)
++ *
++ * - from a thread that is bound to a single CPU
++ *
++ * - in a loop with very short iterations (e.g. a polling loop)
++ */
++bool single_task_running(void)
++{
++ struct rq *rq = cpu_rq(smp_processor_id());
++
++ if (rq_load(rq) == 1)
++ return true;
++ else
++ return false;
++}
++EXPORT_SYMBOL(single_task_running);
++
++unsigned long long nr_context_switches(void)
++{
++ int i;
++ unsigned long long sum = 0;
++
++ for_each_possible_cpu(i)
++ sum += cpu_rq(i)->nr_switches;
++
++ return sum;
++}
++
++/*
++ * IO-wait accounting, and how its mostly bollocks (on SMP).
++ *
++ * The idea behind IO-wait account is to account the idle time that we could
++ * have spend running if it were not for IO. That is, if we were to improve the
++ * storage performance, we'd have a proportional reduction in IO-wait time.
++ *
++ * This all works nicely on UP, where, when a task blocks on IO, we account
++ * idle time as IO-wait, because if the storage were faster, it could've been
++ * running and we'd not be idle.
++ *
++ * This has been extended to SMP, by doing the same for each CPU. This however
++ * is broken.
++ *
++ * Imagine for instance the case where two tasks block on one CPU, only the one
++ * CPU will have IO-wait accounted, while the other has regular idle. Even
++ * though, if the storage were faster, both could've ran at the same time,
++ * utilising both CPUs.
++ *
++ * This means, that when looking globally, the current IO-wait accounting on
++ * SMP is a lower bound, by reason of under accounting.
++ *
++ * Worse, since the numbers are provided per CPU, they are sometimes
++ * interpreted per CPU, and that is nonsensical. A blocked task isn't strictly
++ * associated with any one particular CPU, it can wake to another CPU than it
++ * blocked on. This means the per CPU IO-wait number is meaningless.
++ *
++ * Task CPU affinities can make all that even more 'interesting'.
++ */
++
++unsigned long nr_iowait(void)
++{
++ unsigned long i, sum = 0;
++
++ for_each_possible_cpu(i)
++ sum += atomic_read(&cpu_rq(i)->nr_iowait);
++
++ return sum;
++}
++
++/*
++ * Consumers of these two interfaces, like for example the cpufreq menu
++ * governor are using nonsensical data. Boosting frequency for a CPU that has
++ * IO-wait which might not even end up running the task when it does become
++ * runnable.
++ */
++
++unsigned long nr_iowait_cpu(int cpu)
++{
++ struct rq *this = cpu_rq(cpu);
++ return atomic_read(&this->nr_iowait);
++}
++
++unsigned long nr_active(void)
++{
++ return nr_running() + nr_uninterruptible();
++}
++
++/*
++ * I/O wait is the number of running or queued tasks with their ->rq pointer
++ * set to this cpu as being the CPU they're more likely to run on.
++ */
++void get_iowait_load(unsigned long *nr_waiters, unsigned long *load)
++{
++ struct rq *rq = this_rq();
++
++ *nr_waiters = atomic_read(&rq->nr_iowait);
++ *load = rq_load(rq);
++}
++
++/* Variables and functions for calc_load */
++static unsigned long calc_load_update;
++unsigned long avenrun[3];
++EXPORT_SYMBOL(avenrun);
++
++/**
++ * get_avenrun - get the load average array
++ * @loads: pointer to dest load array
++ * @offset: offset to add
++ * @shift: shift count to shift the result left
++ *
++ * These values are estimates at best, so no need for locking.
++ */
++void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
++{
++ loads[0] = (avenrun[0] + offset) << shift;
++ loads[1] = (avenrun[1] + offset) << shift;
++ loads[2] = (avenrun[2] + offset) << shift;
++}
++
++static unsigned long
++calc_load(unsigned long load, unsigned long exp, unsigned long active)
++{
++ unsigned long newload;
++
++ newload = load * exp + active * (FIXED_1 - exp);
++ if (active >= load)
++ newload += FIXED_1-1;
++
++ return newload / FIXED_1;
++}
++
++/*
++ * calc_load - update the avenrun load estimates every LOAD_FREQ seconds.
++ */
++void calc_global_load(unsigned long ticks)
++{
++ long active;
++
++ if (time_before(jiffies, READ_ONCE(calc_load_update)))
++ return;
++ active = nr_active() * FIXED_1;
++
++ avenrun[0] = calc_load(avenrun[0], EXP_1, active);
++ avenrun[1] = calc_load(avenrun[1], EXP_5, active);
++ avenrun[2] = calc_load(avenrun[2], EXP_15, active);
++
++ calc_load_update = jiffies + LOAD_FREQ;
++}
++
++DEFINE_PER_CPU(struct kernel_stat, kstat);
++DEFINE_PER_CPU(struct kernel_cpustat, kernel_cpustat);
++
++EXPORT_PER_CPU_SYMBOL(kstat);
++EXPORT_PER_CPU_SYMBOL(kernel_cpustat);
++
++#ifdef CONFIG_PARAVIRT
++static inline u64 steal_ticks(u64 steal)
++{
++ if (unlikely(steal > NSEC_PER_SEC))
++ return div_u64(steal, TICK_NSEC);
++
++ return __iter_div_u64_rem(steal, TICK_NSEC, &steal);
++}
++#endif
++
++#ifndef nsecs_to_cputime
++# define nsecs_to_cputime(__nsecs) nsecs_to_jiffies(__nsecs)
++#endif
++
++/*
++ * On each tick, add the number of nanoseconds to the unbanked variables and
++ * once one tick's worth has accumulated, account it allowing for accurate
++ * sub-tick accounting and totals. Use the TICK_APPROX_NS to match the way we
++ * deduct nanoseconds.
++ */
++static void pc_idle_time(struct rq *rq, struct task_struct *idle, unsigned long ns)
++{
++ u64 *cpustat = kcpustat_this_cpu->cpustat;
++ unsigned long ticks;
++
++ if (atomic_read(&rq->nr_iowait) > 0) {
++ rq->iowait_ns += ns;
++ if (rq->iowait_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->iowait_ns);
++ cpustat[CPUTIME_IOWAIT] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->iowait_ns %= JIFFY_NS;
++ }
++ } else {
++ rq->idle_ns += ns;
++ if (rq->idle_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->idle_ns);
++ cpustat[CPUTIME_IDLE] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->idle_ns %= JIFFY_NS;
++ }
++ }
++ acct_update_integrals(idle);
++}
++
++static void pc_system_time(struct rq *rq, struct task_struct *p,
++ int hardirq_offset, unsigned long ns)
++{
++ u64 *cpustat = kcpustat_this_cpu->cpustat;
++ unsigned long ticks;
++
++ p->stime_ns += ns;
++ if (p->stime_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(p->stime_ns);
++ p->stime_ns %= JIFFY_NS;
++ p->stime += (__force u64)TICK_APPROX_NS * ticks;
++ account_group_system_time(p, TICK_APPROX_NS * ticks);
++ }
++ p->sched_time += ns;
++ account_group_exec_runtime(p, ns);
++
++ if (hardirq_count() - hardirq_offset) {
++ rq->irq_ns += ns;
++ if (rq->irq_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->irq_ns);
++ cpustat[CPUTIME_IRQ] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->irq_ns %= JIFFY_NS;
++ }
++ } else if (in_serving_softirq()) {
++ rq->softirq_ns += ns;
++ if (rq->softirq_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->softirq_ns);
++ cpustat[CPUTIME_SOFTIRQ] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->softirq_ns %= JIFFY_NS;
++ }
++ } else {
++ rq->system_ns += ns;
++ if (rq->system_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->system_ns);
++ cpustat[CPUTIME_SYSTEM] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->system_ns %= JIFFY_NS;
++ }
++ }
++ acct_update_integrals(p);
++}
++
++static void pc_user_time(struct rq *rq, struct task_struct *p, unsigned long ns)
++{
++ u64 *cpustat = kcpustat_this_cpu->cpustat;
++ unsigned long ticks;
++
++ p->utime_ns += ns;
++ if (p->utime_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(p->utime_ns);
++ p->utime_ns %= JIFFY_NS;
++ p->utime += (__force u64)TICK_APPROX_NS * ticks;
++ account_group_user_time(p, TICK_APPROX_NS * ticks);
++ }
++ p->sched_time += ns;
++ account_group_exec_runtime(p, ns);
++
++ if (this_cpu_ksoftirqd() == p) {
++ /*
++ * ksoftirqd time do not get accounted in cpu_softirq_time.
++ * So, we have to handle it separately here.
++ */
++ rq->softirq_ns += ns;
++ if (rq->softirq_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->softirq_ns);
++ cpustat[CPUTIME_SOFTIRQ] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->softirq_ns %= JIFFY_NS;
++ }
++ }
++
++ if (task_nice(p) > 0 || idleprio_task(p)) {
++ rq->nice_ns += ns;
++ if (rq->nice_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->nice_ns);
++ cpustat[CPUTIME_NICE] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->nice_ns %= JIFFY_NS;
++ }
++ } else {
++ rq->user_ns += ns;
++ if (rq->user_ns >= JIFFY_NS) {
++ ticks = NS_TO_JIFFIES(rq->user_ns);
++ cpustat[CPUTIME_USER] += (__force u64)TICK_APPROX_NS * ticks;
++ rq->user_ns %= JIFFY_NS;
++ }
++ }
++ acct_update_integrals(p);
++}
++
++/*
++ * This is called on clock ticks.
++ * Bank in p->sched_time the ns elapsed since the last tick or switch.
++ * CPU scheduler quota accounting is also performed here in microseconds.
++ */
++static void update_cpu_clock_tick(struct rq *rq, struct task_struct *p)
++{
++ s64 account_ns = rq->niffies - p->last_ran;
++ struct task_struct *idle = rq->idle;
++
++ /* Accurate tick timekeeping */
++ if (user_mode(get_irq_regs()))
++ pc_user_time(rq, p, account_ns);
++ else if (p != idle || (irq_count() != HARDIRQ_OFFSET)) {
++ pc_system_time(rq, p, HARDIRQ_OFFSET, account_ns);
++ } else
++ pc_idle_time(rq, idle, account_ns);
++
++ /* time_slice accounting is done in usecs to avoid overflow on 32bit */
++ if (p->policy != SCHED_FIFO && p != idle)
++ p->time_slice -= NS_TO_US(account_ns);
++
++ p->last_ran = rq->niffies;
++}
++
++/*
++ * This is called on context switches.
++ * Bank in p->sched_time the ns elapsed since the last tick or switch.
++ * CPU scheduler quota accounting is also performed here in microseconds.
++ */
++static void update_cpu_clock_switch(struct rq *rq, struct task_struct *p)
++{
++ s64 account_ns = rq->niffies - p->last_ran;
++ struct task_struct *idle = rq->idle;
++
++ /* Accurate subtick timekeeping */
++ if (p != idle)
++ pc_user_time(rq, p, account_ns);
++ else
++ pc_idle_time(rq, idle, account_ns);
++
++ /* time_slice accounting is done in usecs to avoid overflow on 32bit */
++ if (p->policy != SCHED_FIFO && p != idle)
++ p->time_slice -= NS_TO_US(account_ns);
++}
++
++/*
++ * Return any ns on the sched_clock that have not yet been accounted in
++ * @p in case that task is currently running.
++ *
++ * Called with task_rq_lock(p) held.
++ */
++static inline u64 do_task_delta_exec(struct task_struct *p, struct rq *rq)
++{
++ u64 ns = 0;
++
++ /*
++ * Must be ->curr _and_ ->on_rq. If dequeued, we would
++ * project cycles that may never be accounted to this
++ * thread, breaking clock_gettime().
++ */
++ if (p == rq->curr && task_on_rq_queued(p)) {
++ update_clocks(rq);
++ ns = rq->niffies - p->last_ran;
++ }
++
++ return ns;
++}
++
++/*
++ * Return accounted runtime for the task.
++ * Return separately the current's pending runtime that have not been
++ * accounted yet.
++ *
++ */
++unsigned long long task_sched_runtime(struct task_struct *p)
++{
++ unsigned long flags;
++ struct rq *rq;
++ u64 ns;
++
++#if defined(CONFIG_64BIT) && defined(CONFIG_SMP)
++ /*
++ * 64-bit doesn't need locks to atomically read a 64-bit value.
++ * So we have a optimisation chance when the task's delta_exec is 0.
++ * Reading ->on_cpu is racy, but this is ok.
++ *
++ * If we race with it leaving CPU, we'll take a lock. So we're correct.
++ * If we race with it entering CPU, unaccounted time is 0. This is
++ * indistinguishable from the read occurring a few cycles earlier.
++ * If we see ->on_cpu without ->on_rq, the task is leaving, and has
++ * been accounted, so we're correct here as well.
++ */
++ if (!p->on_cpu || !task_on_rq_queued(p))
++ return tsk_seruntime(p);
++#endif
++
++ rq = task_rq_lock(p, &flags);
++ ns = p->sched_time + do_task_delta_exec(p, rq);
++ task_rq_unlock(rq, p, &flags);
++
++ return ns;
++}
++
++/*
++ * Functions to test for when SCHED_ISO tasks have used their allocated
++ * quota as real time scheduling and convert them back to SCHED_NORMAL. All
++ * data is modified only by the local runqueue during scheduler_tick with
++ * interrupts disabled.
++ */
++
++/*
++ * Test if SCHED_ISO tasks have run longer than their alloted period as RT
++ * tasks and set the refractory flag if necessary. There is 10% hysteresis
++ * for unsetting the flag. 115/128 is ~90/100 as a fast shift instead of a
++ * slow division.
++ */
++static inline void iso_tick(struct rq *rq)
++{
++ rq->iso_ticks = rq->iso_ticks * (ISO_PERIOD - 1) / ISO_PERIOD;
++ rq->iso_ticks += 100;
++ if (rq->iso_ticks > ISO_PERIOD * sched_iso_cpu) {
++ rq->iso_refractory = true;
++ if (unlikely(rq->iso_ticks > ISO_PERIOD * 100))
++ rq->iso_ticks = ISO_PERIOD * 100;
++ }
++}
++
++/* No SCHED_ISO task was running so decrease rq->iso_ticks */
++static inline void no_iso_tick(struct rq *rq, int ticks)
++{
++ if (rq->iso_ticks > 0 || rq->iso_refractory) {
++ rq->iso_ticks = rq->iso_ticks * (ISO_PERIOD - ticks) / ISO_PERIOD;
++ if (rq->iso_ticks < ISO_PERIOD * (sched_iso_cpu * 115 / 128)) {
++ rq->iso_refractory = false;
++ if (unlikely(rq->iso_ticks < 0))
++ rq->iso_ticks = 0;
++ }
++ }
++}
++
++/* This manages tasks that have run out of timeslice during a scheduler_tick */
++static void task_running_tick(struct rq *rq)
++{
++ struct task_struct *p = rq->curr;
++
++ /*
++ * If a SCHED_ISO task is running we increment the iso_ticks. In
++ * order to prevent SCHED_ISO tasks from causing starvation in the
++ * presence of true RT tasks we account those as iso_ticks as well.
++ */
++ if (rt_task(p) || task_running_iso(p))
++ iso_tick(rq);
++ else
++ no_iso_tick(rq, 1);
++
++ /* SCHED_FIFO tasks never run out of timeslice. */
++ if (p->policy == SCHED_FIFO)
++ return;
++
++ if (iso_task(p)) {
++ if (task_running_iso(p)) {
++ if (rq->iso_refractory) {
++ /*
++ * SCHED_ISO task is running as RT and limit
++ * has been hit. Force it to reschedule as
++ * SCHED_NORMAL by zeroing its time_slice
++ */
++ p->time_slice = 0;
++ }
++ } else if (!rq->iso_refractory) {
++ /* Can now run again ISO. Reschedule to pick up prio */
++ goto out_resched;
++ }
++ }
++
++ /*
++ * Tasks that were scheduled in the first half of a tick are not
++ * allowed to run into the 2nd half of the next tick if they will
++ * run out of time slice in the interim. Otherwise, if they have
++ * less than RESCHED_US μs of time slice left they will be rescheduled.
++ * Dither is used as a backup for when hrexpiry is disabled or high res
++ * timers not configured in.
++ */
++ if (p->time_slice - rq->dither >= RESCHED_US)
++ return;
++out_resched:
++ rq_lock(rq);
++ __set_tsk_resched(p);
++ rq_unlock(rq);
++}
++
++static inline void task_tick(struct rq *rq)
++{
++ if (!rq_idle(rq))
++ task_running_tick(rq);
++ else if (rq->last_jiffy > rq->last_scheduler_tick)
++ no_iso_tick(rq, rq->last_jiffy - rq->last_scheduler_tick);
++}
++
++#ifdef CONFIG_NO_HZ_FULL
++/*
++ * We can stop the timer tick any time highres timers are active since
++ * we rely entirely on highres timeouts for task expiry rescheduling.
++ */
++static void sched_stop_tick(struct rq *rq, int cpu)
++{
++ if (!hrexpiry_enabled(rq))
++ return;
++ if (!tick_nohz_full_enabled())
++ return;
++ if (!tick_nohz_full_cpu(cpu))
++ return;
++ tick_nohz_dep_clear_cpu(cpu, TICK_DEP_BIT_SCHED);
++}
++
++static inline void sched_start_tick(struct rq *rq, int cpu)
++{
++ tick_nohz_dep_set_cpu(cpu, TICK_DEP_BIT_SCHED);
++}
++
++struct tick_work {
++ int cpu;
++ struct delayed_work work;
++};
++
++static struct tick_work __percpu *tick_work_cpu;
++
++static void sched_tick_remote(struct work_struct *work)
++{
++ struct delayed_work *dwork = to_delayed_work(work);
++ struct tick_work *twork = container_of(dwork, struct tick_work, work);
++ int cpu = twork->cpu;
++ struct rq *rq = cpu_rq(cpu);
++ struct task_struct *curr;
++ u64 delta;
++
++ /*
++ * Handle the tick only if it appears the remote CPU is running in full
++ * dynticks mode. The check is racy by nature, but missing a tick or
++ * having one too much is no big deal because the scheduler tick updates
++ * statistics and checks timeslices in a time-independent way, regardless
++ * of when exactly it is running.
++ */
++ if (idle_cpu(cpu) || !tick_nohz_tick_stopped_cpu(cpu))
++ goto out_requeue;
++
++ rq_lock_irq(rq);
++ curr = rq->curr;
++ if (is_idle_task(curr))
++ goto out_unlock;
++
++ update_rq_clock(rq);
++ delta = rq_clock_task(rq) - curr->last_ran;
++
++ /*
++ * Make sure the next tick runs within a reasonable
++ * amount of time.
++ */
++ WARN_ON_ONCE(delta > (u64)NSEC_PER_SEC * 3);
++ task_tick(rq);
++
++out_unlock:
++ rq_unlock_irq(rq);
++
++out_requeue:
++ /*
++ * Run the remote tick once per second (1Hz). This arbitrary
++ * frequency is large enough to avoid overload but short enough
++ * to keep scheduler internal stats reasonably up to date.
++ */
++ queue_delayed_work(system_unbound_wq, dwork, HZ);
++}
++
++static void sched_tick_start(int cpu)
++{
++ struct tick_work *twork;
++
++ if (housekeeping_cpu(cpu, HK_FLAG_TICK))
++ return;
++
++ WARN_ON_ONCE(!tick_work_cpu);
++
++ twork = per_cpu_ptr(tick_work_cpu, cpu);
++ twork->cpu = cpu;
++ INIT_DELAYED_WORK(&twork->work, sched_tick_remote);
++ queue_delayed_work(system_unbound_wq, &twork->work, HZ);
++}
++
++#ifdef CONFIG_HOTPLUG_CPU
++static void sched_tick_stop(int cpu)
++{
++ struct tick_work *twork;
++
++ if (housekeeping_cpu(cpu, HK_FLAG_TICK))
++ return;
++
++ WARN_ON_ONCE(!tick_work_cpu);
++
++ twork = per_cpu_ptr(tick_work_cpu, cpu);
++ cancel_delayed_work_sync(&twork->work);
++}
++#endif /* CONFIG_HOTPLUG_CPU */
++
++int __init sched_tick_offload_init(void)
++{
++ tick_work_cpu = alloc_percpu(struct tick_work);
++ BUG_ON(!tick_work_cpu);
++
++ return 0;
++}
++
++#else /* !CONFIG_NO_HZ_FULL */
++static inline void sched_stop_tick(struct rq *rq, int cpu) {}
++static inline void sched_start_tick(struct rq *rq, int cpu) {}
++static inline void sched_tick_start(int cpu) { }
++static inline void sched_tick_stop(int cpu) { }
++#endif
++
++/*
++ * This function gets called by the timer code, with HZ frequency.
++ * We call it with interrupts disabled.
++ */
++void scheduler_tick(void)
++{
++ int cpu __maybe_unused = smp_processor_id();
++ struct rq *rq = cpu_rq(cpu);
++
++ sched_clock_tick();
++ update_clocks(rq);
++ update_load_avg(rq, 0);
++ update_cpu_clock_tick(rq, rq->curr);
++ task_tick(rq);
++ rq->last_scheduler_tick = rq->last_jiffy;
++ rq->last_tick = rq->clock;
++ perf_event_task_tick();
++ sched_stop_tick(rq, cpu);
++}
++
++#if defined(CONFIG_PREEMPT) && (defined(CONFIG_DEBUG_PREEMPT) || \
++ defined(CONFIG_TRACE_PREEMPT_TOGGLE))
++/*
++ * If the value passed in is equal to the current preempt count
++ * then we just disabled preemption. Start timing the latency.
++ */
++static inline void preempt_latency_start(int val)
++{
++ if (preempt_count() == val) {
++ unsigned long ip = get_lock_parent_ip();
++#ifdef CONFIG_DEBUG_PREEMPT
++ current->preempt_disable_ip = ip;
++#endif
++ trace_preempt_off(CALLER_ADDR0, ip);
++ }
++}
++
++void preempt_count_add(int val)
++{
++#ifdef CONFIG_DEBUG_PREEMPT
++ /*
++ * Underflow?
++ */
++ if (DEBUG_LOCKS_WARN_ON((preempt_count() < 0)))
++ return;
++#endif
++ __preempt_count_add(val);
++#ifdef CONFIG_DEBUG_PREEMPT
++ /*
++ * Spinlock count overflowing soon?
++ */
++ DEBUG_LOCKS_WARN_ON((preempt_count() & PREEMPT_MASK) >=
++ PREEMPT_MASK - 10);
++#endif
++ preempt_latency_start(val);
++}
++EXPORT_SYMBOL(preempt_count_add);
++NOKPROBE_SYMBOL(preempt_count_add);
++
++/*
++ * If the value passed in equals to the current preempt count
++ * then we just enabled preemption. Stop timing the latency.
++ */
++static inline void preempt_latency_stop(int val)
++{
++ if (preempt_count() == val)
++ trace_preempt_on(CALLER_ADDR0, get_lock_parent_ip());
++}
++
++void preempt_count_sub(int val)
++{
++#ifdef CONFIG_DEBUG_PREEMPT
++ /*
++ * Underflow?
++ */
++ if (DEBUG_LOCKS_WARN_ON(val > preempt_count()))
++ return;
++ /*
++ * Is the spinlock portion underflowing?
++ */
++ if (DEBUG_LOCKS_WARN_ON((val < PREEMPT_MASK) &&
++ !(preempt_count() & PREEMPT_MASK)))
++ return;
++#endif
++
++ preempt_latency_stop(val);
++ __preempt_count_sub(val);
++}
++EXPORT_SYMBOL(preempt_count_sub);
++NOKPROBE_SYMBOL(preempt_count_sub);
++
++#else
++static inline void preempt_latency_start(int val) { }
++static inline void preempt_latency_stop(int val) { }
++#endif
++
++static inline unsigned long get_preempt_disable_ip(struct task_struct *p)
++{
++#ifdef CONFIG_DEBUG_PREEMPT
++ return p->preempt_disable_ip;
++#else
++ return 0;
++#endif
++}
++
++/*
++ * The time_slice is only refilled when it is empty and that is when we set a
++ * new deadline. Make sure update_clocks has been called recently to update
++ * rq->niffies.
++ */
++static void time_slice_expired(struct task_struct *p, struct rq *rq)
++{
++ p->time_slice = timeslice();
++ p->deadline = rq->niffies + task_deadline_diff(p);
++#ifdef CONFIG_SMT_NICE
++ if (!p->mm)
++ p->smt_bias = 0;
++ else if (rt_task(p))
++ p->smt_bias = 1 << 30;
++ else if (task_running_iso(p))
++ p->smt_bias = 1 << 29;
++ else if (idleprio_task(p)) {
++ if (task_running_idle(p))
++ p->smt_bias = 0;
++ else
++ p->smt_bias = 1;
++ } else if (--p->smt_bias < 1)
++ p->smt_bias = MAX_PRIO - p->static_prio;
++#endif
++}
++
++/*
++ * Timeslices below RESCHED_US are considered as good as expired as there's no
++ * point rescheduling when there's so little time left. SCHED_BATCH tasks
++ * have been flagged be not latency sensitive and likely to be fully CPU
++ * bound so every time they're rescheduled they have their time_slice
++ * refilled, but get a new later deadline to have little effect on
++ * SCHED_NORMAL tasks.
++
++ */
++static inline void check_deadline(struct task_struct *p, struct rq *rq)
++{
++ if (p->time_slice < RESCHED_US || batch_task(p))
++ time_slice_expired(p, rq);
++}
++
++/*
++ * Task selection with skiplists is a simple matter of picking off the first
++ * task in the sorted list, an O(1) operation. The lookup is amortised O(1)
++ * being bound to the number of processors.
++ *
++ * Runqueues are selectively locked based on their unlocked data and then
++ * unlocked if not needed. At most 3 locks will be held at any time and are
++ * released as soon as they're no longer needed. All balancing between CPUs
++ * is thus done here in an extremely simple first come best fit manner.
++ *
++ * This iterates over runqueues in cache locality order. In interactive mode
++ * it iterates over all CPUs and finds the task with the best key/deadline.
++ * In non-interactive mode it will only take a task if it's from the current
++ * runqueue or a runqueue with more tasks than the current one with a better
++ * key/deadline.
++ */
++#ifdef CONFIG_SMP
++static inline struct task_struct
++*earliest_deadline_task(struct rq *rq, int cpu, struct task_struct *idle)
++{
++ struct rq *locked = NULL, *chosen = NULL;
++ struct task_struct *edt = idle;
++ int i, best_entries = 0;
++ u64 best_key = ~0ULL;
++
++ for (i = 0; i < total_runqueues; i++) {
++ struct rq *other_rq = rq_order(rq, i);
++ skiplist_node *next;
++ int entries;
++
++ entries = other_rq->sl->entries;
++ /*
++ * Check for queued entres lockless first. The local runqueue
++ * is locked so entries will always be accurate.
++ */
++ if (!sched_interactive) {
++ /*
++ * Don't reschedule balance across nodes unless the CPU
++ * is idle.
++ */
++ if (edt != idle && rq->cpu_locality[other_rq->cpu] > 3)
++ break;
++ if (entries <= best_entries)
++ continue;
++ } else if (!entries)
++ continue;
++
++ /* if (i) implies other_rq != rq */
++ if (i) {
++ /* Check for best id queued lockless first */
++ if (other_rq->best_key >= best_key)
++ continue;
++
++ if (unlikely(!trylock_rq(rq, other_rq)))
++ continue;
++
++ /* Need to reevaluate entries after locking */
++ entries = other_rq->sl->entries;
++ if (unlikely(!entries)) {
++ unlock_rq(other_rq);
++ continue;
++ }
++ }
++
++ next = other_rq->node;
++ /*
++ * In interactive mode we check beyond the best entry on other
++ * runqueues if we can't get the best for smt or affinity
++ * reasons.
++ */
++ while ((next = next->next[0]) != other_rq->node) {
++ struct task_struct *p;
++ u64 key = next->key;
++
++ /* Reevaluate key after locking */
++ if (key >= best_key)
++ break;
++
++ p = next->value;
++ if (!smt_schedule(p, rq)) {
++ if (i && !sched_interactive)
++ break;
++ continue;
++ }
++
++ if (sched_other_cpu(p, cpu)) {
++ if (sched_interactive || !i)
++ continue;
++ break;
++ }
++ /* Make sure affinity is ok */
++ if (i) {
++ /* From this point on p is the best so far */
++ if (locked)
++ unlock_rq(locked);
++ chosen = locked = other_rq;
++ }
++ best_entries = entries;
++ best_key = key;
++ edt = p;
++ break;
++ }
++ /* rq->preempting is a hint only as the state may have changed
++ * since it was set with the resched call but if we have met
++ * the condition we can break out here. */
++ if (edt == rq->preempting)
++ break;
++ if (i && other_rq != chosen)
++ unlock_rq(other_rq);
++ }
++
++ if (likely(edt != idle))
++ take_task(rq, cpu, edt);
++
++ if (locked)
++ unlock_rq(locked);
++
++ rq->preempting = NULL;
++
++ return edt;
++}
++#else /* CONFIG_SMP */
++static inline struct task_struct
++*earliest_deadline_task(struct rq *rq, int cpu, struct task_struct *idle)
++{
++ struct task_struct *edt;
++
++ if (unlikely(!rq->sl->entries))
++ return idle;
++ edt = rq->node->next[0]->value;
++ take_task(rq, cpu, edt);
++ return edt;
++}
++#endif /* CONFIG_SMP */
++
++/*
++ * Print scheduling while atomic bug:
++ */
++static noinline void __schedule_bug(struct task_struct *prev)
++{
++ /* Save this before calling printk(), since that will clobber it */
++ unsigned long preempt_disable_ip = get_preempt_disable_ip(current);
++
++ if (oops_in_progress)
++ return;
++
++ printk(KERN_ERR "BUG: scheduling while atomic: %s/%d/0x%08x\n",
++ prev->comm, prev->pid, preempt_count());
++
++ debug_show_held_locks(prev);
++ print_modules();
++ if (irqs_disabled())
++ print_irqtrace_events(prev);
++ if (IS_ENABLED(CONFIG_DEBUG_PREEMPT)
++ && in_atomic_preempt_off()) {
++ pr_err("Preemption disabled at:");
++ print_ip_sym(preempt_disable_ip);
++ pr_cont("\n");
++ }
++ dump_stack();
++ add_taint(TAINT_WARN, LOCKDEP_STILL_OK);
++}
++
++/*
++ * Various schedule()-time debugging checks and statistics:
++ */
++static inline void schedule_debug(struct task_struct *prev)
++{
++#ifdef CONFIG_SCHED_STACK_END_CHECK
++ if (task_stack_end_corrupted(prev))
++ panic("corrupted stack end detected inside scheduler\n");
++#endif
++
++ if (unlikely(in_atomic_preempt_off())) {
++ __schedule_bug(prev);
++ preempt_count_set(PREEMPT_DISABLED);
++ }
++ rcu_sleep_check();
++
++ profile_hit(SCHED_PROFILING, __builtin_return_address(0));
++
++ schedstat_inc(this_rq()->sched_count);
++}
++
++/*
++ * The currently running task's information is all stored in rq local data
++ * which is only modified by the local CPU.
++ */
++static inline void set_rq_task(struct rq *rq, struct task_struct *p)
++{
++ if (p == rq->idle || p->policy == SCHED_FIFO)
++ hrexpiry_clear(rq);
++ else
++ hrexpiry_start(rq, US_TO_NS(p->time_slice));
++ if (rq->clock - rq->last_tick > HALF_JIFFY_NS)
++ rq->dither = 0;
++ else
++ rq->dither = rq_dither(rq);
++
++ rq->rq_deadline = p->deadline;
++ rq->rq_prio = p->prio;
++#ifdef CONFIG_SMT_NICE
++ rq->rq_mm = p->mm;
++ rq->rq_smt_bias = p->smt_bias;
++#endif
++}
++
++#ifdef CONFIG_SMT_NICE
++static void check_no_siblings(struct rq __maybe_unused *this_rq) {}
++static void wake_no_siblings(struct rq __maybe_unused *this_rq) {}
++static void (*check_siblings)(struct rq *this_rq) = &check_no_siblings;
++static void (*wake_siblings)(struct rq *this_rq) = &wake_no_siblings;
++
++/* Iterate over smt siblings when we've scheduled a process on cpu and decide
++ * whether they should continue running or be descheduled. */
++static void check_smt_siblings(struct rq *this_rq)
++{
++ int other_cpu;
++
++ for_each_cpu(other_cpu, &this_rq->thread_mask) {
++ struct task_struct *p;
++ struct rq *rq;
++
++ rq = cpu_rq(other_cpu);
++ if (rq_idle(rq))
++ continue;
++ p = rq->curr;
++ if (!smt_schedule(p, this_rq))
++ resched_curr(rq);
++ }
++}
++
++static void wake_smt_siblings(struct rq *this_rq)
++{
++ int other_cpu;
++
++ for_each_cpu(other_cpu, &this_rq->thread_mask) {
++ struct rq *rq;
++
++ rq = cpu_rq(other_cpu);
++ if (rq_idle(rq))
++ resched_idle(rq);
++ }
++}
++#else
++static void check_siblings(struct rq __maybe_unused *this_rq) {}
++static void wake_siblings(struct rq __maybe_unused *this_rq) {}
++#endif
++
++/*
++ * schedule() is the main scheduler function.
++ *
++ * The main means of driving the scheduler and thus entering this function are:
++ *
++ * 1. Explicit blocking: mutex, semaphore, waitqueue, etc.
++ *
++ * 2. TIF_NEED_RESCHED flag is checked on interrupt and userspace return
++ * paths. For example, see arch/x86/entry_64.S.
++ *
++ * To drive preemption between tasks, the scheduler sets the flag in timer
++ * interrupt handler scheduler_tick().
++ *
++ * 3. Wakeups don't really cause entry into schedule(). They add a
++ * task to the run-queue and that's it.
++ *
++ * Now, if the new task added to the run-queue preempts the current
++ * task, then the wakeup sets TIF_NEED_RESCHED and schedule() gets
++ * called on the nearest possible occasion:
++ *
++ * - If the kernel is preemptible (CONFIG_PREEMPT=y):
++ *
++ * - in syscall or exception context, at the next outmost
++ * preempt_enable(). (this might be as soon as the wake_up()'s
++ * spin_unlock()!)
++ *
++ * - in IRQ context, return from interrupt-handler to
++ * preemptible context
++ *
++ * - If the kernel is not preemptible (CONFIG_PREEMPT is not set)
++ * then at the next:
++ *
++ * - cond_resched() call
++ * - explicit schedule() call
++ * - return from syscall or exception to user-space
++ * - return from interrupt-handler to user-space
++ *
++ * WARNING: must be called with preemption disabled!
++ */
++static void __sched notrace __schedule(bool preempt)
++{
++ struct task_struct *prev, *next, *idle;
++ unsigned long *switch_count;
++ bool deactivate = false;
++ struct rq *rq;
++ u64 niffies;
++ int cpu;
++
++ cpu = smp_processor_id();
++ rq = cpu_rq(cpu);
++ prev = rq->curr;
++ idle = rq->idle;
++
++ schedule_debug(prev);
++
++ local_irq_disable();
++ rcu_note_context_switch(preempt);
++
++ /*
++ * Make sure that signal_pending_state()->signal_pending() below
++ * can't be reordered with __set_current_state(TASK_INTERRUPTIBLE)
++ * done by the caller to avoid the race with signal_wake_up().
++ *
++ * The membarrier system call requires a full memory barrier
++ * after coming from user-space, before storing to rq->curr.
++ */
++ rq_lock(rq);
++ smp_mb__after_spinlock();
++#ifdef CONFIG_SMP
++ if (rq->preempt) {
++ /*
++ * Make sure resched_curr hasn't triggered a preemption
++ * locklessly on a task that has since scheduled away. Spurious
++ * wakeup of idle is okay though.
++ */
++ if (unlikely(preempt && prev != idle && !test_tsk_need_resched(prev))) {
++ rq->preempt = NULL;
++ clear_preempt_need_resched();
++ rq_unlock_irq(rq);
++ return;
++ }
++ rq->preempt = NULL;
++ }
++#endif
++
++ switch_count = &prev->nivcsw;
++ if (!preempt && prev->state) {
++ if (unlikely(signal_pending_state(prev->state, prev))) {
++ prev->state = TASK_RUNNING;
++ } else {
++ deactivate = true;
++ prev->on_rq = 0;
++
++ if (prev->in_iowait) {
++ atomic_inc(&rq->nr_iowait);
++ delayacct_blkio_start();
++ }
++
++ /*
++ * If a worker is going to sleep, notify and
++ * ask workqueue whether it wants to wake up a
++ * task to maintain concurrency. If so, wake
++ * up the task.
++ */
++ if (prev->flags & PF_WQ_WORKER) {
++ struct task_struct *to_wakeup;
++
++ to_wakeup = wq_worker_sleeping(prev);
++ if (to_wakeup)
++ try_to_wake_up_local(to_wakeup);
++ }
++ }
++ switch_count = &prev->nvcsw;
++ }
++
++ /*
++ * Store the niffy value here for use by the next task's last_ran
++ * below to avoid losing niffies due to update_clocks being called
++ * again after this point.
++ */
++ update_clocks(rq);
++ niffies = rq->niffies;
++ update_cpu_clock_switch(rq, prev);
++
++ clear_tsk_need_resched(prev);
++ clear_preempt_need_resched();
++
++ if (idle != prev) {
++ check_deadline(prev, rq);
++ return_task(prev, rq, cpu, deactivate);
++ }
++
++ next = earliest_deadline_task(rq, cpu, idle);
++ if (likely(next->prio != PRIO_LIMIT))
++ clear_cpuidle_map(cpu);
++ else {
++ set_cpuidle_map(cpu);
++ update_load_avg(rq, 0);
++ }
++
++ set_rq_task(rq, next);
++ next->last_ran = niffies;
++
++ if (likely(prev != next)) {
++ /*
++ * Don't reschedule an idle task or deactivated tasks
++ */
++ if (prev == idle) {
++ rq->nr_running++;
++ if (rt_task(next))
++ rq->rt_nr_running++;
++ } else if (!deactivate)
++ resched_suitable_idle(prev);
++ if (unlikely(next == idle)) {
++ rq->nr_running--;
++ if (rt_task(prev))
++ rq->rt_nr_running--;
++ wake_siblings(rq);
++ } else
++ check_siblings(rq);
++ rq->nr_switches++;
++ rq->curr = next;
++ /*
++ * The membarrier system call requires each architecture
++ * to have a full memory barrier after updating
++ * rq->curr, before returning to user-space.
++ *
++ * Here are the schemes providing that barrier on the
++ * various architectures:
++ * - mm ? switch_mm() : mmdrop() for x86, s390, sparc, PowerPC.
++ * switch_mm() rely on membarrier_arch_switch_mm() on PowerPC.
++ * - finish_lock_switch() for weakly-ordered
++ * architectures where spin_unlock is a full barrier,
++ * - switch_to() for arm64 (weakly-ordered, spin_unlock
++ * is a RELEASE barrier),
++ */
++ ++*switch_count;
++
++ trace_sched_switch(preempt, prev, next);
++ context_switch(rq, prev, next); /* unlocks the rq */
++ } else {
++ check_siblings(rq);
++ rq_unlock(rq);
++ do_pending_softirq(rq, next);
++ local_irq_enable();
++ }
++}
++
++void __noreturn do_task_dead(void)
++{
++ /* Causes final put_task_struct in finish_task_switch(). */
++ set_special_state(TASK_DEAD);
++
++ /* Tell freezer to ignore us: */
++ current->flags |= PF_NOFREEZE;
++ __schedule(false);
++ BUG();
++
++ /* Avoid "noreturn function does return" - but don't continue if BUG() is a NOP: */
++ for (;;)
++ cpu_relax();
++}
++
++static inline void sched_submit_work(struct task_struct *tsk)
++{
++ if (!tsk->state || tsk_is_pi_blocked(tsk) ||
++ preempt_count() ||
++ signal_pending_state(tsk->state, tsk))
++ return;
++
++ /*
++ * If we are going to sleep and we have plugged IO queued,
++ * make sure to submit it to avoid deadlocks.
++ */
++ if (blk_needs_flush_plug(tsk))
++ blk_schedule_flush_plug(tsk);
++}
++
++asmlinkage __visible void __sched schedule(void)
++{
++ struct task_struct *tsk = current;
++
++ sched_submit_work(tsk);
++ do {
++ preempt_disable();
++ __schedule(false);
++ sched_preempt_enable_no_resched();
++ } while (need_resched());
++}
++
++EXPORT_SYMBOL(schedule);
++
++/*
++ * synchronize_rcu_tasks() makes sure that no task is stuck in preempted
++ * state (have scheduled out non-voluntarily) by making sure that all
++ * tasks have either left the run queue or have gone into user space.
++ * As idle tasks do not do either, they must not ever be preempted
++ * (schedule out non-voluntarily).
++ *
++ * schedule_idle() is similar to schedule_preempt_disable() except that it
++ * never enables preemption because it does not call sched_submit_work().
++ */
++void __sched schedule_idle(void)
++{
++ /*
++ * As this skips calling sched_submit_work(), which the idle task does
++ * regardless because that function is a nop when the task is in a
++ * TASK_RUNNING state, make sure this isn't used someplace that the
++ * current task can be in any other state. Note, idle is always in the
++ * TASK_RUNNING state.
++ */
++ WARN_ON_ONCE(current->state);
++ do {
++ __schedule(false);
++ } while (need_resched());
++}
++
++#ifdef CONFIG_CONTEXT_TRACKING
++asmlinkage __visible void __sched schedule_user(void)
++{
++ /*
++ * If we come here after a random call to set_need_resched(),
++ * or we have been woken up remotely but the IPI has not yet arrived,
++ * we haven't yet exited the RCU idle mode. Do it here manually until
++ * we find a better solution.
++ *
++ * NB: There are buggy callers of this function. Ideally we
++ * should warn if prev_state != IN_USER, but that will trigger
++ * too frequently to make sense yet.
++ */
++ enum ctx_state prev_state = exception_enter();
++ schedule();
++ exception_exit(prev_state);
++}
++#endif
++
++/**
++ * schedule_preempt_disabled - called with preemption disabled
++ *
++ * Returns with preemption disabled. Note: preempt_count must be 1
++ */
++void __sched schedule_preempt_disabled(void)
++{
++ sched_preempt_enable_no_resched();
++ schedule();
++ preempt_disable();
++}
++
++static void __sched notrace preempt_schedule_common(void)
++{
++ do {
++ /*
++ * Because the function tracer can trace preempt_count_sub()
++ * and it also uses preempt_enable/disable_notrace(), if
++ * NEED_RESCHED is set, the preempt_enable_notrace() called
++ * by the function tracer will call this function again and
++ * cause infinite recursion.
++ *
++ * Preemption must be disabled here before the function
++ * tracer can trace. Break up preempt_disable() into two
++ * calls. One to disable preemption without fear of being
++ * traced. The other to still record the preemption latency,
++ * which can also be traced by the function tracer.
++ */
++ preempt_disable_notrace();
++ preempt_latency_start(1);
++ __schedule(true);
++ preempt_latency_stop(1);
++ preempt_enable_no_resched_notrace();
++
++ /*
++ * Check again in case we missed a preemption opportunity
++ * between schedule and now.
++ */
++ } while (need_resched());
++}
++
++#ifdef CONFIG_PREEMPT
++/*
++ * this is the entry point to schedule() from in-kernel preemption
++ * off of preempt_enable. Kernel preemptions off return from interrupt
++ * occur there and call schedule directly.
++ */
++asmlinkage __visible void __sched notrace preempt_schedule(void)
++{
++ /*
++ * If there is a non-zero preempt_count or interrupts are disabled,
++ * we do not want to preempt the current task. Just return..
++ */
++ if (likely(!preemptible()))
++ return;
++
++ preempt_schedule_common();
++}
++NOKPROBE_SYMBOL(preempt_schedule);
++EXPORT_SYMBOL(preempt_schedule);
++
++/**
++ * preempt_schedule_notrace - preempt_schedule called by tracing
++ *
++ * The tracing infrastructure uses preempt_enable_notrace to prevent
++ * recursion and tracing preempt enabling caused by the tracing
++ * infrastructure itself. But as tracing can happen in areas coming
++ * from userspace or just about to enter userspace, a preempt enable
++ * can occur before user_exit() is called. This will cause the scheduler
++ * to be called when the system is still in usermode.
++ *
++ * To prevent this, the preempt_enable_notrace will use this function
++ * instead of preempt_schedule() to exit user context if needed before
++ * calling the scheduler.
++ */
++asmlinkage __visible void __sched notrace preempt_schedule_notrace(void)
++{
++ enum ctx_state prev_ctx;
++
++ if (likely(!preemptible()))
++ return;
++
++ do {
++ /*
++ * Because the function tracer can trace preempt_count_sub()
++ * and it also uses preempt_enable/disable_notrace(), if
++ * NEED_RESCHED is set, the preempt_enable_notrace() called
++ * by the function tracer will call this function again and
++ * cause infinite recursion.
++ *
++ * Preemption must be disabled here before the function
++ * tracer can trace. Break up preempt_disable() into two
++ * calls. One to disable preemption without fear of being
++ * traced. The other to still record the preemption latency,
++ * which can also be traced by the function tracer.
++ */
++ preempt_disable_notrace();
++ preempt_latency_start(1);
++ /*
++ * Needs preempt disabled in case user_exit() is traced
++ * and the tracer calls preempt_enable_notrace() causing
++ * an infinite recursion.
++ */
++ prev_ctx = exception_enter();
++ __schedule(true);
++ exception_exit(prev_ctx);
++
++ preempt_latency_stop(1);
++ preempt_enable_no_resched_notrace();
++ } while (need_resched());
++}
++EXPORT_SYMBOL_GPL(preempt_schedule_notrace);
++
++#endif /* CONFIG_PREEMPT */
++
++/*
++ * this is the entry point to schedule() from kernel preemption
++ * off of irq context.
++ * Note, that this is called and return with irqs disabled. This will
++ * protect us against recursive calling from irq.
++ */
++asmlinkage __visible void __sched preempt_schedule_irq(void)
++{
++ enum ctx_state prev_state;
++
++ /* Catch callers which need to be fixed */
++ BUG_ON(preempt_count() || !irqs_disabled());
++
++ prev_state = exception_enter();
++
++ do {
++ preempt_disable();
++ local_irq_enable();
++ __schedule(true);
++ local_irq_disable();
++ sched_preempt_enable_no_resched();
++ } while (need_resched());
++
++ exception_exit(prev_state);
++}
++
++int default_wake_function(wait_queue_entry_t *curr, unsigned mode, int wake_flags,
++ void *key)
++{
++ return try_to_wake_up(curr->private, mode, wake_flags);
++}
++EXPORT_SYMBOL(default_wake_function);
++
++#ifdef CONFIG_RT_MUTEXES
++
++static inline int __rt_effective_prio(struct task_struct *pi_task, int prio)
++{
++ if (pi_task)
++ prio = min(prio, pi_task->prio);
++
++ return prio;
++}
++
++static inline int rt_effective_prio(struct task_struct *p, int prio)
++{
++ struct task_struct *pi_task = rt_mutex_get_top_task(p);
++
++ return __rt_effective_prio(pi_task, prio);
++}
++
++/*
++ * rt_mutex_setprio - set the current priority of a task
++ * @p: task to boost
++ * @pi_task: donor task
++ *
++ * This function changes the 'effective' priority of a task. It does
++ * not touch ->normal_prio like __setscheduler().
++ *
++ * Used by the rt_mutex code to implement priority inheritance
++ * logic. Call site only calls if the priority of the task changed.
++ */
++void rt_mutex_setprio(struct task_struct *p, struct task_struct *pi_task)
++{
++ int prio, oldprio;
++ struct rq *rq;
++
++ /* XXX used to be waiter->prio, not waiter->task->prio */
++ prio = __rt_effective_prio(pi_task, p->normal_prio);
++
++ /*
++ * If nothing changed; bail early.
++ */
++ if (p->pi_top_task == pi_task && prio == p->prio)
++ return;
++
++ rq = __task_rq_lock(p);
++ update_rq_clock(rq);
++ /*
++ * Set under pi_lock && rq->lock, such that the value can be used under
++ * either lock.
++ *
++ * Note that there is loads of tricky to make this pointer cache work
++ * right. rt_mutex_slowunlock()+rt_mutex_postunlock() work together to
++ * ensure a task is de-boosted (pi_task is set to NULL) before the
++ * task is allowed to run again (and can exit). This ensures the pointer
++ * points to a blocked task -- which guaratees the task is present.
++ */
++ p->pi_top_task = pi_task;
++
++ /*
++ * For FIFO/RR we only need to set prio, if that matches we're done.
++ */
++ if (prio == p->prio)
++ goto out_unlock;
++
++ /*
++ * Idle task boosting is a nono in general. There is one
++ * exception, when PREEMPT_RT and NOHZ is active:
++ *
++ * The idle task calls get_next_timer_interrupt() and holds
++ * the timer wheel base->lock on the CPU and another CPU wants
++ * to access the timer (probably to cancel it). We can safely
++ * ignore the boosting request, as the idle CPU runs this code
++ * with interrupts disabled and will complete the lock
++ * protected section without being interrupted. So there is no
++ * real need to boost.
++ */
++ if (unlikely(p == rq->idle)) {
++ WARN_ON(p != rq->curr);
++ WARN_ON(p->pi_blocked_on);
++ goto out_unlock;
++ }
++
++ trace_sched_pi_setprio(p, pi_task);
++ oldprio = p->prio;
++ p->prio = prio;
++ if (task_running(rq, p)){
++ if (prio > oldprio)
++ resched_task(p);
++ } else if (task_queued(p)) {
++ dequeue_task(rq, p, DEQUEUE_SAVE);
++ enqueue_task(rq, p, ENQUEUE_RESTORE);
++ if (prio < oldprio)
++ try_preempt(p, rq);
++ }
++out_unlock:
++ __task_rq_unlock(rq);
++}
++#else
++static inline int rt_effective_prio(struct task_struct *p, int prio)
++{
++ return prio;
++}
++#endif
++
++/*
++ * Adjust the deadline for when the priority is to change, before it's
++ * changed.
++ */
++static inline void adjust_deadline(struct task_struct *p, int new_prio)
++{
++ p->deadline += static_deadline_diff(new_prio) - task_deadline_diff(p);
++}
++
++void set_user_nice(struct task_struct *p, long nice)
++{
++ int new_static, old_static;
++ unsigned long flags;
++ struct rq *rq;
++
++ if (task_nice(p) == nice || nice < MIN_NICE || nice > MAX_NICE)
++ return;
++ new_static = NICE_TO_PRIO(nice);
++ /*
++ * We have to be careful, if called from sys_setpriority(),
++ * the task might be in the middle of scheduling on another CPU.
++ */
++ rq = task_rq_lock(p, &flags);
++ update_rq_clock(rq);
++
++ /*
++ * The RT priorities are set via sched_setscheduler(), but we still
++ * allow the 'normal' nice value to be set - but as expected
++ * it wont have any effect on scheduling until the task is
++ * not SCHED_NORMAL/SCHED_BATCH:
++ */
++ if (has_rt_policy(p)) {
++ p->static_prio = new_static;
++ goto out_unlock;
++ }
++
++ adjust_deadline(p, new_static);
++ old_static = p->static_prio;
++ p->static_prio = new_static;
++ p->prio = effective_prio(p);
++
++ if (task_queued(p)) {
++ dequeue_task(rq, p, DEQUEUE_SAVE);
++ enqueue_task(rq, p, ENQUEUE_RESTORE);
++ if (new_static < old_static)
++ try_preempt(p, rq);
++ } else if (task_running(rq, p)) {
++ set_rq_task(rq, p);
++ if (old_static < new_static)
++ resched_task(p);
++ }
++out_unlock:
++ task_rq_unlock(rq, p, &flags);
++}
++EXPORT_SYMBOL(set_user_nice);
++
++/*
++ * can_nice - check if a task can reduce its nice value
++ * @p: task
++ * @nice: nice value
++ */
++int can_nice(const struct task_struct *p, const int nice)
++{
++ /* Convert nice value [19,-20] to rlimit style value [1,40] */
++ int nice_rlim = nice_to_rlimit(nice);
++
++ return (nice_rlim <= task_rlimit(p, RLIMIT_NICE) ||
++ capable(CAP_SYS_NICE));
++}
++
++#ifdef __ARCH_WANT_SYS_NICE
++
++/*
++ * sys_nice - change the priority of the current process.
++ * @increment: priority increment
++ *
++ * sys_setpriority is a more generic, but much slower function that
++ * does similar things.
++ */
++SYSCALL_DEFINE1(nice, int, increment)
++{
++ long nice, retval;
++
++ /*
++ * Setpriority might change our priority at the same moment.
++ * We don't have to worry. Conceptually one call occurs first
++ * and we have a single winner.
++ */
++
++ increment = clamp(increment, -NICE_WIDTH, NICE_WIDTH);
++ nice = task_nice(current) + increment;
++
++ nice = clamp_val(nice, MIN_NICE, MAX_NICE);
++ if (increment < 0 && !can_nice(current, nice))
++ return -EPERM;
++
++ retval = security_task_setnice(current, nice);
++ if (retval)
++ return retval;
++
++ set_user_nice(current, nice);
++ return 0;
++}
++
++#endif
++
++/**
++ * task_prio - return the priority value of a given task.
++ * @p: the task in question.
++ *
++ * Return: The priority value as seen by users in /proc.
++ * RT tasks are offset by -100. Normal tasks are centered around 1, value goes
++ * from 0 (SCHED_ISO) up to 82 (nice +19 SCHED_IDLEPRIO).
++ */
++int task_prio(const struct task_struct *p)
++{
++ int delta, prio = p->prio - MAX_RT_PRIO;
++
++ /* rt tasks and iso tasks */
++ if (prio <= 0)
++ goto out;
++
++ /* Convert to ms to avoid overflows */
++ delta = NS_TO_MS(p->deadline - task_rq(p)->niffies);
++ if (unlikely(delta < 0))
++ delta = 0;
++ delta = delta * 40 / ms_longest_deadline_diff();
++ if (delta <= 80)
++ prio += delta;
++ if (idleprio_task(p))
++ prio += 40;
++out:
++ return prio;
++}
++
++/**
++ * idle_cpu - is a given CPU idle currently?
++ * @cpu: the processor in question.
++ *
++ * Return: 1 if the CPU is currently idle. 0 otherwise.
++ */
++int idle_cpu(int cpu)
++{
++ return cpu_curr(cpu) == cpu_rq(cpu)->idle;
++}
++
++/**
++ * available_idle_cpu - is a given CPU idle for enqueuing work.
++ * @cpu: the CPU in question.
++ *
++ * Return: 1 if the CPU is currently idle. 0 otherwise.
++ */
++int available_idle_cpu(int cpu)
++{
++ if (!idle_cpu(cpu))
++ return 0;
++
++ if (vcpu_is_preempted(cpu))
++ return 0;
++
++ return 1;
++}
++
++/**
++ * idle_task - return the idle task for a given CPU.
++ * @cpu: the processor in question.
++ *
++ * Return: The idle task for the CPU @cpu.
++ */
++struct task_struct *idle_task(int cpu)
++{
++ return cpu_rq(cpu)->idle;
++}
++
++/**
++ * find_process_by_pid - find a process with a matching PID value.
++ * @pid: the pid in question.
++ *
++ * The task of @pid, if found. %NULL otherwise.
++ */
++static inline struct task_struct *find_process_by_pid(pid_t pid)
++{
++ return pid ? find_task_by_vpid(pid) : current;
++}
++
++/* Actually do priority change: must hold rq lock. */
++static void __setscheduler(struct task_struct *p, struct rq *rq, int policy,
++ int prio, bool keep_boost)
++{
++ int oldrtprio, oldprio;
++
++ p->policy = policy;
++ oldrtprio = p->rt_priority;
++ p->rt_priority = prio;
++ p->normal_prio = normal_prio(p);
++ oldprio = p->prio;
++ /*
++ * Keep a potential priority boosting if called from
++ * sched_setscheduler().
++ */
++ p->prio = normal_prio(p);
++ if (keep_boost)
++ p->prio = rt_effective_prio(p, p->prio);
++
++ if (task_running(rq, p)) {
++ set_rq_task(rq, p);
++ resched_task(p);
++ } else if (task_queued(p)) {
++ dequeue_task(rq, p, DEQUEUE_SAVE);
++ enqueue_task(rq, p, ENQUEUE_RESTORE);
++ if (p->prio < oldprio || p->rt_priority > oldrtprio)
++ try_preempt(p, rq);
++ }
++}
++
++/*
++ * Check the target process has a UID that matches the current process's
++ */
++static bool check_same_owner(struct task_struct *p)
++{
++ const struct cred *cred = current_cred(), *pcred;
++ bool match;
++
++ rcu_read_lock();
++ pcred = __task_cred(p);
++ match = (uid_eq(cred->euid, pcred->euid) ||
++ uid_eq(cred->euid, pcred->uid));
++ rcu_read_unlock();
++ return match;
++}
++
++static int __sched_setscheduler(struct task_struct *p,
++ const struct sched_attr *attr,
++ bool user, bool pi)
++{
++ int retval, policy = attr->sched_policy, oldpolicy = -1, priority = attr->sched_priority;
++ unsigned long flags, rlim_rtprio = 0;
++ int reset_on_fork;
++ struct rq *rq;
++
++ /* The pi code expects interrupts enabled */
++ BUG_ON(pi && in_interrupt());
++
++ if (is_rt_policy(policy) && !capable(CAP_SYS_NICE)) {
++ unsigned long lflags;
++
++ if (!lock_task_sighand(p, &lflags))
++ return -ESRCH;
++ rlim_rtprio = task_rlimit(p, RLIMIT_RTPRIO);
++ unlock_task_sighand(p, &lflags);
++ if (rlim_rtprio)
++ goto recheck;
++ /*
++ * If the caller requested an RT policy without having the
++ * necessary rights, we downgrade the policy to SCHED_ISO.
++ * We also set the parameter to zero to pass the checks.
++ */
++ policy = SCHED_ISO;
++ priority = 0;
++ }
++recheck:
++ /* Double check policy once rq lock held */
++ if (policy < 0) {
++ reset_on_fork = p->sched_reset_on_fork;
++ policy = oldpolicy = p->policy;
++ } else {
++ reset_on_fork = !!(policy & SCHED_RESET_ON_FORK);
++ policy &= ~SCHED_RESET_ON_FORK;
++
++ if (!SCHED_RANGE(policy))
++ return -EINVAL;
++ }
++
++ if (attr->sched_flags & ~(SCHED_FLAG_ALL | SCHED_FLAG_SUGOV))
++ return -EINVAL;
++
++ /*
++ * Valid priorities for SCHED_FIFO and SCHED_RR are
++ * 1..MAX_USER_RT_PRIO-1, valid priority for SCHED_NORMAL and
++ * SCHED_BATCH is 0.
++ */
++ if (priority < 0 ||
++ (p->mm && priority > MAX_USER_RT_PRIO - 1) ||
++ (!p->mm && priority > MAX_RT_PRIO - 1))
++ return -EINVAL;
++ if (is_rt_policy(policy) != (priority != 0))
++ return -EINVAL;
++
++ /*
++ * Allow unprivileged RT tasks to decrease priority:
++ */
++ if (user && !capable(CAP_SYS_NICE)) {
++ if (is_rt_policy(policy)) {
++ unsigned long rlim_rtprio =
++ task_rlimit(p, RLIMIT_RTPRIO);
++
++ /* Can't set/change the rt policy */
++ if (policy != p->policy && !rlim_rtprio)
++ return -EPERM;
++
++ /* Can't increase priority */
++ if (priority > p->rt_priority &&
++ priority > rlim_rtprio)
++ return -EPERM;
++ } else {
++ switch (p->policy) {
++ /*
++ * Can only downgrade policies but not back to
++ * SCHED_NORMAL
++ */
++ case SCHED_ISO:
++ if (policy == SCHED_ISO)
++ goto out;
++ if (policy != SCHED_NORMAL)
++ return -EPERM;
++ break;
++ case SCHED_BATCH:
++ if (policy == SCHED_BATCH)
++ goto out;
++ if (policy != SCHED_IDLEPRIO)
++ return -EPERM;
++ break;
++ case SCHED_IDLEPRIO:
++ if (policy == SCHED_IDLEPRIO)
++ goto out;
++ return -EPERM;
++ default:
++ break;
++ }
++ }
++
++ /* Can't change other user's priorities */
++ if (!check_same_owner(p))
++ return -EPERM;
++
++ /* Normal users shall not reset the sched_reset_on_fork flag: */
++ if (p->sched_reset_on_fork && !reset_on_fork)
++ return -EPERM;
++ }
++
++ if (user) {
++ retval = security_task_setscheduler(p);
++ if (retval)
++ return retval;
++ }
++
++ /*
++ * Make sure no PI-waiters arrive (or leave) while we are
++ * changing the priority of the task:
++ *
++ * To be able to change p->policy safely, the runqueue lock must be
++ * held.
++ */
++ rq = task_rq_lock(p, &flags);
++ update_rq_clock(rq);
++
++ /*
++ * Changing the policy of the stop threads its a very bad idea:
++ */
++ if (p == rq->stop) {
++ task_rq_unlock(rq, p, &flags);
++ return -EINVAL;
++ }
++
++ /*
++ * If not changing anything there's no need to proceed further:
++ */
++ if (unlikely(policy == p->policy && (!is_rt_policy(policy) ||
++ priority == p->rt_priority))) {
++ task_rq_unlock(rq, p, &flags);
++ return 0;
++ }
++
++ /* Re-check policy now with rq lock held */
++ if (unlikely(oldpolicy != -1 && oldpolicy != p->policy)) {
++ policy = oldpolicy = -1;
++ task_rq_unlock(rq, p, &flags);
++ goto recheck;
++ }
++ p->sched_reset_on_fork = reset_on_fork;
++
++ __setscheduler(p, rq, policy, priority, pi);
++ task_rq_unlock(rq, p, &flags);
++
++ if (pi)
++ rt_mutex_adjust_pi(p);
++out:
++ return 0;
++}
++
++static int _sched_setscheduler(struct task_struct *p, int policy,
++ const struct sched_param *param, bool check)
++{
++ struct sched_attr attr = {
++ .sched_policy = policy,
++ .sched_priority = param->sched_priority,
++ .sched_nice = PRIO_TO_NICE(p->static_prio),
++ };
++
++ return __sched_setscheduler(p, &attr, check, true);
++}
++/**
++ * sched_setscheduler - change the scheduling policy and/or RT priority of a thread.
++ * @p: the task in question.
++ * @policy: new policy.
++ * @param: structure containing the new RT priority.
++ *
++ * Return: 0 on success. An error code otherwise.
++ *
++ * NOTE that the task may be already dead.
++ */
++int sched_setscheduler(struct task_struct *p, int policy,
++ const struct sched_param *param)
++{
++ return _sched_setscheduler(p, policy, param, true);
++}
++
++EXPORT_SYMBOL_GPL(sched_setscheduler);
++
++int sched_setattr(struct task_struct *p, const struct sched_attr *attr)
++{
++ return __sched_setscheduler(p, attr, true, true);
++}
++EXPORT_SYMBOL_GPL(sched_setattr);
++
++int sched_setattr_nocheck(struct task_struct *p, const struct sched_attr *attr)
++{
++ return __sched_setscheduler(p, attr, false, true);
++}
++
++/**
++ * sched_setscheduler_nocheck - change the scheduling policy and/or RT priority of a thread from kernelspace.
++ * @p: the task in question.
++ * @policy: new policy.
++ * @param: structure containing the new RT priority.
++ *
++ * Just like sched_setscheduler, only don't bother checking if the
++ * current context has permission. For example, this is needed in
++ * stop_machine(): we create temporary high priority worker threads,
++ * but our caller might not have that capability.
++ *
++ * Return: 0 on success. An error code otherwise.
++ */
++int sched_setscheduler_nocheck(struct task_struct *p, int policy,
++ const struct sched_param *param)
++{
++ return _sched_setscheduler(p, policy, param, false);
++}
++EXPORT_SYMBOL_GPL(sched_setscheduler_nocheck);
++
++static int
++do_sched_setscheduler(pid_t pid, int policy, struct sched_param __user *param)
++{
++ struct sched_param lparam;
++ struct task_struct *p;
++ int retval;
++
++ if (!param || pid < 0)
++ return -EINVAL;
++ if (copy_from_user(&lparam, param, sizeof(struct sched_param)))
++ return -EFAULT;
++
++ rcu_read_lock();
++ retval = -ESRCH;
++ p = find_process_by_pid(pid);
++ if (p != NULL)
++ retval = sched_setscheduler(p, policy, &lparam);
++ rcu_read_unlock();
++
++ return retval;
++}
++
++/*
++ * Mimics kernel/events/core.c perf_copy_attr().
++ */
++static int sched_copy_attr(struct sched_attr __user *uattr,
++ struct sched_attr *attr)
++{
++ u32 size;
++ int ret;
++
++ if (!access_ok(VERIFY_WRITE, uattr, SCHED_ATTR_SIZE_VER0))
++ return -EFAULT;
++
++ /* Zero the full structure, so that a short copy will be nice: */
++ memset(attr, 0, sizeof(*attr));
++
++ ret = get_user(size, &uattr->size);
++ if (ret)
++ return ret;
++
++ /* Bail out on silly large: */
++ if (size > PAGE_SIZE)
++ goto err_size;
++
++ /* ABI compatibility quirk: */
++ if (!size)
++ size = SCHED_ATTR_SIZE_VER0;
++
++ if (size < SCHED_ATTR_SIZE_VER0)
++ goto err_size;
++
++ /*
++ * If we're handed a bigger struct than we know of,
++ * ensure all the unknown bits are 0 - i.e. new
++ * user-space does not rely on any kernel feature
++ * extensions we dont know about yet.
++ */
++ if (size > sizeof(*attr)) {
++ unsigned char __user *addr;
++ unsigned char __user *end;
++ unsigned char val;
++
++ addr = (void __user *)uattr + sizeof(*attr);
++ end = (void __user *)uattr + size;
++
++ for (; addr < end; addr++) {
++ ret = get_user(val, addr);
++ if (ret)
++ return ret;
++ if (val)
++ goto err_size;
++ }
++ size = sizeof(*attr);
++ }
++
++ ret = copy_from_user(attr, uattr, size);
++ if (ret)
++ return -EFAULT;
++
++ /*
++ * XXX: Do we want to be lenient like existing syscalls; or do we want
++ * to be strict and return an error on out-of-bounds values?
++ */
++ attr->sched_nice = clamp(attr->sched_nice, -20, 19);
++
++ /* sched/core.c uses zero here but we already know ret is zero */
++ return 0;
++
++err_size:
++ put_user(sizeof(*attr), &uattr->size);
++ return -E2BIG;
++}
++
++/*
++ * sched_setparam() passes in -1 for its policy, to let the functions
++ * it calls know not to change it.
++ */
++#define SETPARAM_POLICY -1
++
++/**
++ * sys_sched_setscheduler - set/change the scheduler policy and RT priority
++ * @pid: the pid in question.
++ * @policy: new policy.
++ * @param: structure containing the new RT priority.
++ *
++ * Return: 0 on success. An error code otherwise.
++ */
++SYSCALL_DEFINE3(sched_setscheduler, pid_t, pid, int, policy, struct sched_param __user *, param)
++{
++ if (policy < 0)
++ return -EINVAL;
++
++ return do_sched_setscheduler(pid, policy, param);
++}
++
++/**
++ * sys_sched_setparam - set/change the RT priority of a thread
++ * @pid: the pid in question.
++ * @param: structure containing the new RT priority.
++ *
++ * Return: 0 on success. An error code otherwise.
++ */
++SYSCALL_DEFINE2(sched_setparam, pid_t, pid, struct sched_param __user *, param)
++{
++ return do_sched_setscheduler(pid, SETPARAM_POLICY, param);
++}
++
++/**
++ * sys_sched_setattr - same as above, but with extended sched_attr
++ * @pid: the pid in question.
++ * @uattr: structure containing the extended parameters.
++ */
++SYSCALL_DEFINE3(sched_setattr, pid_t, pid, struct sched_attr __user *, uattr,
++ unsigned int, flags)
++{
++ struct sched_attr attr;
++ struct task_struct *p;
++ int retval;
++
++ if (!uattr || pid < 0 || flags)
++ return -EINVAL;
++
++ retval = sched_copy_attr(uattr, &attr);
++ if (retval)
++ return retval;
++
++ if ((int)attr.sched_policy < 0)
++ return -EINVAL;
++
++ rcu_read_lock();
++ retval = -ESRCH;
++ p = find_process_by_pid(pid);
++ if (p != NULL)
++ retval = sched_setattr(p, &attr);
++ rcu_read_unlock();
++
++ return retval;
++}
++
++/**
++ * sys_sched_getscheduler - get the policy (scheduling class) of a thread
++ * @pid: the pid in question.
++ *
++ * Return: On success, the policy of the thread. Otherwise, a negative error
++ * code.
++ */
++SYSCALL_DEFINE1(sched_getscheduler, pid_t, pid)
++{
++ struct task_struct *p;
++ int retval = -EINVAL;
++
++ if (pid < 0)
++ goto out_nounlock;
++
++ retval = -ESRCH;
++ rcu_read_lock();
++ p = find_process_by_pid(pid);
++ if (p) {
++ retval = security_task_getscheduler(p);
++ if (!retval)
++ retval = p->policy;
++ }
++ rcu_read_unlock();
++
++out_nounlock:
++ return retval;
++}
++
++/**
++ * sys_sched_getscheduler - get the RT priority of a thread
++ * @pid: the pid in question.
++ * @param: structure containing the RT priority.
++ *
++ * Return: On success, 0 and the RT priority is in @param. Otherwise, an error
++ * code.
++ */
++SYSCALL_DEFINE2(sched_getparam, pid_t, pid, struct sched_param __user *, param)
++{
++ struct sched_param lp = { .sched_priority = 0 };
++ struct task_struct *p;
++ int retval = -EINVAL;
++
++ if (!param || pid < 0)
++ goto out_nounlock;
++
++ rcu_read_lock();
++ p = find_process_by_pid(pid);
++ retval = -ESRCH;
++ if (!p)
++ goto out_unlock;
++
++ retval = security_task_getscheduler(p);
++ if (retval)
++ goto out_unlock;
++
++ if (has_rt_policy(p))
++ lp.sched_priority = p->rt_priority;
++ rcu_read_unlock();
++
++ /*
++ * This one might sleep, we cannot do it with a spinlock held ...
++ */
++ retval = copy_to_user(param, &lp, sizeof(*param)) ? -EFAULT : 0;
++
++out_nounlock:
++ return retval;
++
++out_unlock:
++ rcu_read_unlock();
++ return retval;
++}
++
++static int sched_read_attr(struct sched_attr __user *uattr,
++ struct sched_attr *attr,
++ unsigned int usize)
++{
++ int ret;
++
++ if (!access_ok(VERIFY_WRITE, uattr, usize))
++ return -EFAULT;
++
++ /*
++ * If we're handed a smaller struct than we know of,
++ * ensure all the unknown bits are 0 - i.e. old
++ * user-space does not get uncomplete information.
++ */
++ if (usize < sizeof(*attr)) {
++ unsigned char *addr;
++ unsigned char *end;
++
++ addr = (void *)attr + usize;
++ end = (void *)attr + sizeof(*attr);
++
++ for (; addr < end; addr++) {
++ if (*addr)
++ return -EFBIG;
++ }
++
++ attr->size = usize;
++ }
++
++ ret = copy_to_user(uattr, attr, attr->size);
++ if (ret)
++ return -EFAULT;
++
++ /* sched/core.c uses zero here but we already know ret is zero */
++ return ret;
++}
++
++/**
++ * sys_sched_getattr - similar to sched_getparam, but with sched_attr
++ * @pid: the pid in question.
++ * @uattr: structure containing the extended parameters.
++ * @size: sizeof(attr) for fwd/bwd comp.
++ * @flags: for future extension.
++ */
++SYSCALL_DEFINE4(sched_getattr, pid_t, pid, struct sched_attr __user *, uattr,
++ unsigned int, size, unsigned int, flags)
++{
++ struct sched_attr attr = {
++ .size = sizeof(struct sched_attr),
++ };
++ struct task_struct *p;
++ int retval;
++
++ if (!uattr || pid < 0 || size > PAGE_SIZE ||
++ size < SCHED_ATTR_SIZE_VER0 || flags)
++ return -EINVAL;
++
++ rcu_read_lock();
++ p = find_process_by_pid(pid);
++ retval = -ESRCH;
++ if (!p)
++ goto out_unlock;
++
++ retval = security_task_getscheduler(p);
++ if (retval)
++ goto out_unlock;
++
++ attr.sched_policy = p->policy;
++ if (rt_task(p))
++ attr.sched_priority = p->rt_priority;
++ else
++ attr.sched_nice = task_nice(p);
++
++ rcu_read_unlock();
++
++ retval = sched_read_attr(uattr, &attr, size);
++ return retval;
++
++out_unlock:
++ rcu_read_unlock();
++ return retval;
++}
++
++long sched_setaffinity(pid_t pid, const struct cpumask *in_mask)
++{
++ cpumask_var_t cpus_allowed, new_mask;
++ struct task_struct *p;
++ int retval;
++
++ rcu_read_lock();
++
++ p = find_process_by_pid(pid);
++ if (!p) {
++ rcu_read_unlock();
++ return -ESRCH;
++ }
++
++ /* Prevent p going away */
++ get_task_struct(p);
++ rcu_read_unlock();
++
++ if (p->flags & PF_NO_SETAFFINITY) {
++ retval = -EINVAL;
++ goto out_put_task;
++ }
++ if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) {
++ retval = -ENOMEM;
++ goto out_put_task;
++ }
++ if (!alloc_cpumask_var(&new_mask, GFP_KERNEL)) {
++ retval = -ENOMEM;
++ goto out_free_cpus_allowed;
++ }
++ retval = -EPERM;
++ if (!check_same_owner(p)) {
++ rcu_read_lock();
++ if (!ns_capable(__task_cred(p)->user_ns, CAP_SYS_NICE)) {
++ rcu_read_unlock();
++ goto out_unlock;
++ }
++ rcu_read_unlock();
++ }
++
++ retval = security_task_setscheduler(p);
++ if (retval)
++ goto out_unlock;
++
++ cpuset_cpus_allowed(p, cpus_allowed);
++ cpumask_and(new_mask, in_mask, cpus_allowed);
++again:
++ retval = __set_cpus_allowed_ptr(p, new_mask, true);
++
++ if (!retval) {
++ cpuset_cpus_allowed(p, cpus_allowed);
++ if (!cpumask_subset(new_mask, cpus_allowed)) {
++ /*
++ * We must have raced with a concurrent cpuset
++ * update. Just reset the cpus_allowed to the
++ * cpuset's cpus_allowed
++ */
++ cpumask_copy(new_mask, cpus_allowed);
++ goto again;
++ }
++ }
++out_unlock:
++ free_cpumask_var(new_mask);
++out_free_cpus_allowed:
++ free_cpumask_var(cpus_allowed);
++out_put_task:
++ put_task_struct(p);
++ return retval;
++}
++
++static int get_user_cpu_mask(unsigned long __user *user_mask_ptr, unsigned len,
++ cpumask_t *new_mask)
++{
++ if (len < cpumask_size())
++ cpumask_clear(new_mask);
++ else if (len > cpumask_size())
++ len = cpumask_size();
++
++ return copy_from_user(new_mask, user_mask_ptr, len) ? -EFAULT : 0;
++}
++
++
++/**
++ * sys_sched_setaffinity - set the CPU affinity of a process
++ * @pid: pid of the process
++ * @len: length in bytes of the bitmask pointed to by user_mask_ptr
++ * @user_mask_ptr: user-space pointer to the new CPU mask
++ *
++ * Return: 0 on success. An error code otherwise.
++ */
++SYSCALL_DEFINE3(sched_setaffinity, pid_t, pid, unsigned int, len,
++ unsigned long __user *, user_mask_ptr)
++{
++ cpumask_var_t new_mask;
++ int retval;
++
++ if (!alloc_cpumask_var(&new_mask, GFP_KERNEL))
++ return -ENOMEM;
++
++ retval = get_user_cpu_mask(user_mask_ptr, len, new_mask);
++ if (retval == 0)
++ retval = sched_setaffinity(pid, new_mask);
++ free_cpumask_var(new_mask);
++ return retval;
++}
++
++long sched_getaffinity(pid_t pid, cpumask_t *mask)
++{
++ struct task_struct *p;
++ unsigned long flags;
++ int retval;
++
++ get_online_cpus();
++ rcu_read_lock();
++
++ retval = -ESRCH;
++ p = find_process_by_pid(pid);
++ if (!p)
++ goto out_unlock;
++
++ retval = security_task_getscheduler(p);
++ if (retval)
++ goto out_unlock;
++
++ raw_spin_lock_irqsave(&p->pi_lock, flags);
++ cpumask_and(mask, &p->cpus_allowed, cpu_active_mask);
++ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
++
++out_unlock:
++ rcu_read_unlock();
++ put_online_cpus();
++
++ return retval;
++}
++
++/**
++ * sys_sched_getaffinity - get the CPU affinity of a process
++ * @pid: pid of the process
++ * @len: length in bytes of the bitmask pointed to by user_mask_ptr
++ * @user_mask_ptr: user-space pointer to hold the current CPU mask
++ *
++ * Return: 0 on success. An error code otherwise.
++ */
++SYSCALL_DEFINE3(sched_getaffinity, pid_t, pid, unsigned int, len,
++ unsigned long __user *, user_mask_ptr)
++{
++ int ret;
++ cpumask_var_t mask;
++
++ if ((len * BITS_PER_BYTE) < nr_cpu_ids)
++ return -EINVAL;
++ if (len & (sizeof(unsigned long)-1))
++ return -EINVAL;
++
++ if (!alloc_cpumask_var(&mask, GFP_KERNEL))
++ return -ENOMEM;
++
++ ret = sched_getaffinity(pid, mask);
++ if (ret == 0) {
++ unsigned int retlen = min(len, cpumask_size());
++
++ if (copy_to_user(user_mask_ptr, mask, retlen))
++ ret = -EFAULT;
++ else
++ ret = retlen;
++ }
++ free_cpumask_var(mask);
++
++ return ret;
++}
++
++/**
++ * sys_sched_yield - yield the current processor to other threads.
++ *
++ * This function yields the current CPU to other tasks. It does this by
++ * scheduling away the current task. If it still has the earliest deadline
++ * it will be scheduled again as the next task.
++ *
++ * Return: 0.
++ */
++static void do_sched_yield(void)
++{
++ struct rq *rq;
++
++ if (!sched_yield_type)
++ return;
++
++ local_irq_disable();
++ rq = this_rq();
++ rq_lock(rq);
++
++ if (sched_yield_type > 1)
++ time_slice_expired(current, rq);
++ schedstat_inc(rq->yld_count);
++
++ /*
++ * Since we are going to call schedule() anyway, there's
++ * no need to preempt or enable interrupts:
++ */
++ preempt_disable();
++ rq_unlock(rq);
++ sched_preempt_enable_no_resched();
++
++ schedule();
++}
++
++SYSCALL_DEFINE0(sched_yield)
++{
++ do_sched_yield();
++ return 0;
++}
++
++#ifndef CONFIG_PREEMPT
++int __sched _cond_resched(void)
++{
++ if (should_resched(0)) {
++ preempt_schedule_common();
++ return 1;
++ }
++ rcu_all_qs();
++ return 0;
++}
++EXPORT_SYMBOL(_cond_resched);
++#endif
++
++/*
++ * __cond_resched_lock() - if a reschedule is pending, drop the given lock,
++ * call schedule, and on return reacquire the lock.
++ *
++ * This works OK both with and without CONFIG_PREEMPT. We do strange low-level
++ * operations here to prevent schedule() from being called twice (once via
++ * spin_unlock(), once by hand).
++ */
++int __cond_resched_lock(spinlock_t *lock)
++{
++ int resched = should_resched(PREEMPT_LOCK_OFFSET);
++ int ret = 0;
++
++ lockdep_assert_held(lock);
++
++ if (spin_needbreak(lock) || resched) {
++ spin_unlock(lock);
++ if (resched)
++ preempt_schedule_common();
++ else
++ cpu_relax();
++ ret = 1;
++ spin_lock(lock);
++ }
++ return ret;
++}
++EXPORT_SYMBOL(__cond_resched_lock);
++
++/**
++ * yield - yield the current processor to other threads.
++ *
++ * Do not ever use this function, there's a 99% chance you're doing it wrong.
++ *
++ * The scheduler is at all times free to pick the calling task as the most
++ * eligible task to run, if removing the yield() call from your code breaks
++ * it, its already broken.
++ *
++ * Typical broken usage is:
++ *
++ * while (!event)
++ * yield();
++ *
++ * where one assumes that yield() will let 'the other' process run that will
++ * make event true. If the current task is a SCHED_FIFO task that will never
++ * happen. Never use yield() as a progress guarantee!!
++ *
++ * If you want to use yield() to wait for something, use wait_event().
++ * If you want to use yield() to be 'nice' for others, use cond_resched().
++ * If you still want to use yield(), do not!
++ */
++void __sched yield(void)
++{
++ set_current_state(TASK_RUNNING);
++ do_sched_yield();
++}
++EXPORT_SYMBOL(yield);
++
++/**
++ * yield_to - yield the current processor to another thread in
++ * your thread group, or accelerate that thread toward the
++ * processor it's on.
++ * @p: target task
++ * @preempt: whether task preemption is allowed or not
++ *
++ * It's the caller's job to ensure that the target task struct
++ * can't go away on us before we can do any checks.
++ *
++ * Return:
++ * true (>0) if we indeed boosted the target task.
++ * false (0) if we failed to boost the target.
++ * -ESRCH if there's no task to yield to.
++ */
++int __sched yield_to(struct task_struct *p, bool preempt)
++{
++ struct task_struct *rq_p;
++ struct rq *rq, *p_rq;
++ unsigned long flags;
++ int yielded = 0;
++
++ local_irq_save(flags);
++ rq = this_rq();
++
++again:
++ p_rq = task_rq(p);
++ /*
++ * If we're the only runnable task on the rq and target rq also
++ * has only one task, there's absolutely no point in yielding.
++ */
++ if (task_running(p_rq, p) || p->state) {
++ yielded = -ESRCH;
++ goto out_irq;
++ }
++
++ double_rq_lock(rq, p_rq);
++ if (unlikely(task_rq(p) != p_rq)) {
++ double_rq_unlock(rq, p_rq);
++ goto again;
++ }
++
++ yielded = 1;
++ schedstat_inc(rq->yld_count);
++ rq_p = rq->curr;
++ if (p->deadline > rq_p->deadline)
++ p->deadline = rq_p->deadline;
++ p->time_slice += rq_p->time_slice;
++ if (p->time_slice > timeslice())
++ p->time_slice = timeslice();
++ time_slice_expired(rq_p, rq);
++ if (preempt && rq != p_rq)
++ resched_task(p_rq->curr);
++ double_rq_unlock(rq, p_rq);
++out_irq:
++ local_irq_restore(flags);
++
++ if (yielded > 0)
++ schedule();
++ return yielded;
++}
++EXPORT_SYMBOL_GPL(yield_to);
++
++int io_schedule_prepare(void)
++{
++ int old_iowait = current->in_iowait;
++
++ current->in_iowait = 1;
++ blk_schedule_flush_plug(current);
++
++ return old_iowait;
++}
++
++void io_schedule_finish(int token)
++{
++ current->in_iowait = token;
++}
++
++/*
++ * This task is about to go to sleep on IO. Increment rq->nr_iowait so
++ * that process accounting knows that this is a task in IO wait state.
++ *
++ * But don't do that if it is a deliberate, throttling IO wait (this task
++ * has set its backing_dev_info: the queue against which it should throttle)
++ */
++
++long __sched io_schedule_timeout(long timeout)
++{
++ int token;
++ long ret;
++
++ token = io_schedule_prepare();
++ ret = schedule_timeout(timeout);
++ io_schedule_finish(token);
++
++ return ret;
++}
++EXPORT_SYMBOL(io_schedule_timeout);
++
++void io_schedule(void)
++{
++ int token;
++
++ token = io_schedule_prepare();
++ schedule();
++ io_schedule_finish(token);
++}
++EXPORT_SYMBOL(io_schedule);
++
++/**
++ * sys_sched_get_priority_max - return maximum RT priority.
++ * @policy: scheduling class.
++ *
++ * Return: On success, this syscall returns the maximum
++ * rt_priority that can be used by a given scheduling class.
++ * On failure, a negative error code is returned.
++ */
++SYSCALL_DEFINE1(sched_get_priority_max, int, policy)
++{
++ int ret = -EINVAL;
++
++ switch (policy) {
++ case SCHED_FIFO:
++ case SCHED_RR:
++ ret = MAX_USER_RT_PRIO-1;
++ break;
++ case SCHED_NORMAL:
++ case SCHED_BATCH:
++ case SCHED_ISO:
++ case SCHED_IDLEPRIO:
++ ret = 0;
++ break;
++ }
++ return ret;
++}
++
++/**
++ * sys_sched_get_priority_min - return minimum RT priority.
++ * @policy: scheduling class.
++ *
++ * Return: On success, this syscall returns the minimum
++ * rt_priority that can be used by a given scheduling class.
++ * On failure, a negative error code is returned.
++ */
++SYSCALL_DEFINE1(sched_get_priority_min, int, policy)
++{
++ int ret = -EINVAL;
++
++ switch (policy) {
++ case SCHED_FIFO:
++ case SCHED_RR:
++ ret = 1;
++ break;
++ case SCHED_NORMAL:
++ case SCHED_BATCH:
++ case SCHED_ISO:
++ case SCHED_IDLEPRIO:
++ ret = 0;
++ break;
++ }
++ return ret;
++}
++
++static int sched_rr_get_interval(pid_t pid, struct timespec64 *t)
++{
++ struct task_struct *p;
++ unsigned int time_slice;
++ unsigned long flags;
++ struct rq *rq;
++ int retval;
++
++ if (pid < 0)
++ return -EINVAL;
++
++ retval = -ESRCH;
++ rcu_read_lock();
++ p = find_process_by_pid(pid);
++ if (!p)
++ goto out_unlock;
++
++ retval = security_task_getscheduler(p);
++ if (retval)
++ goto out_unlock;
++
++ rq = task_rq_lock(p, &flags);
++ time_slice = p->policy == SCHED_FIFO ? 0 : MS_TO_NS(task_timeslice(p));
++ task_rq_unlock(rq, p, &flags);
++
++ rcu_read_unlock();
++ *t = ns_to_timespec64(time_slice);
++ return 0;
++
++out_unlock:
++ rcu_read_unlock();
++ return retval;
++}
++
++/**
++ * sys_sched_rr_get_interval - return the default timeslice of a process.
++ * @pid: pid of the process.
++ * @interval: userspace pointer to the timeslice value.
++ *
++ * this syscall writes the default timeslice value of a given process
++ * into the user-space timespec buffer. A value of '0' means infinity.
++ *
++ * Return: On success, 0 and the timeslice is in @interval. Otherwise,
++ * an error code.
++ */
++SYSCALL_DEFINE2(sched_rr_get_interval, pid_t, pid,
++ struct timespec __user *, interval)
++{
++ struct timespec64 t;
++ int retval = sched_rr_get_interval(pid, &t);
++
++ if (retval == 0)
++ retval = put_timespec64(&t, interval);
++
++ return retval;
++}
++
++#ifdef CONFIG_COMPAT
++COMPAT_SYSCALL_DEFINE2(sched_rr_get_interval,
++ compat_pid_t, pid,
++ struct compat_timespec __user *, interval)
++{
++ struct timespec64 t;
++ int retval = sched_rr_get_interval(pid, &t);
++
++ if (retval == 0)
++ retval = compat_put_timespec64(&t, interval);
++ return retval;
++}
++#endif
++
++void sched_show_task(struct task_struct *p)
++{
++ unsigned long free = 0;
++ int ppid;
++
++ if (!try_get_task_stack(p))
++ return;
++
++ printk(KERN_INFO "%-15.15s %c", p->comm, task_state_to_char(p));
++
++ if (p->state == TASK_RUNNING)
++ printk(KERN_CONT " running task ");
++#ifdef CONFIG_DEBUG_STACK_USAGE
++ free = stack_not_used(p);
++#endif
++ ppid = 0;
++ rcu_read_lock();
++ if (pid_alive(p))
++ ppid = task_pid_nr(rcu_dereference(p->real_parent));
++ rcu_read_unlock();
++ printk(KERN_CONT "%5lu %5d %6d 0x%08lx\n", free,
++ task_pid_nr(p), ppid,
++ (unsigned long)task_thread_info(p)->flags);
++
++ print_worker_info(KERN_INFO, p);
++ show_stack(p, NULL);
++ put_task_stack(p);
++}
++EXPORT_SYMBOL_GPL(sched_show_task);
++
++static inline bool
++state_filter_match(unsigned long state_filter, struct task_struct *p)
++{
++ /* no filter, everything matches */
++ if (!state_filter)
++ return true;
++
++ /* filter, but doesn't match */
++ if (!(p->state & state_filter))
++ return false;
++
++ /*
++ * When looking for TASK_UNINTERRUPTIBLE skip TASK_IDLE (allows
++ * TASK_KILLABLE).
++ */
++ if (state_filter == TASK_UNINTERRUPTIBLE && p->state == TASK_IDLE)
++ return false;
++
++ return true;
++}
++
++void show_state_filter(unsigned long state_filter)
++{
++ struct task_struct *g, *p;
++
++#if BITS_PER_LONG == 32
++ printk(KERN_INFO
++ " task PC stack pid father\n");
++#else
++ printk(KERN_INFO
++ " task PC stack pid father\n");
++#endif
++ rcu_read_lock();
++ for_each_process_thread(g, p) {
++ /*
++ * reset the NMI-timeout, listing all files on a slow
++ * console might take a lot of time:
++ * Also, reset softlockup watchdogs on all CPUs, because
++ * another CPU might be blocked waiting for us to process
++ * an IPI.
++ */
++ touch_nmi_watchdog();
++ touch_all_softlockup_watchdogs();
++ if (state_filter_match(state_filter, p))
++ sched_show_task(p);
++ }
++
++ rcu_read_unlock();
++ /*
++ * Only show locks if all tasks are dumped:
++ */
++ if (!state_filter)
++ debug_show_all_locks();
++}
++
++void dump_cpu_task(int cpu)
++{
++ pr_info("Task dump for CPU %d:\n", cpu);
++ sched_show_task(cpu_curr(cpu));
++}
++
++#ifdef CONFIG_SMP
++void set_cpus_allowed_common(struct task_struct *p, const struct cpumask *new_mask)
++{
++ cpumask_copy(&p->cpus_allowed, new_mask);
++ p->nr_cpus_allowed = cpumask_weight(new_mask);
++}
++
++void __do_set_cpus_allowed(struct task_struct *p, const struct cpumask *new_mask)
++{
++ struct rq *rq = task_rq(p);
++
++ lockdep_assert_held(&p->pi_lock);
++
++ cpumask_copy(&p->cpus_allowed, new_mask);
++
++ if (task_queued(p)) {
++ /*
++ * Because __kthread_bind() calls this on blocked tasks without
++ * holding rq->lock.
++ */
++ lockdep_assert_held(rq->lock);
++ }
++}
++
++/*
++ * Calling do_set_cpus_allowed from outside the scheduler code should not be
++ * called on a running or queued task. We should be holding pi_lock.
++ */
++void do_set_cpus_allowed(struct task_struct *p, const struct cpumask *new_mask)
++{
++ __do_set_cpus_allowed(p, new_mask);
++ if (needs_other_cpu(p, task_cpu(p))) {
++ struct rq *rq;
++
++ rq = __task_rq_lock(p);
++ set_task_cpu(p, valid_task_cpu(p));
++ resched_task(p);
++ __task_rq_unlock(rq);
++ }
++}
++#endif
++
++/**
++ * init_idle - set up an idle thread for a given CPU
++ * @idle: task in question
++ * @cpu: cpu the idle task belongs to
++ *
++ * NOTE: this function does not set the idle thread's NEED_RESCHED
++ * flag, to make booting more robust.
++ */
++void init_idle(struct task_struct *idle, int cpu)
++{
++ struct rq *rq = cpu_rq(cpu);
++ unsigned long flags;
++
++ raw_spin_lock_irqsave(&idle->pi_lock, flags);
++ raw_spin_lock(rq->lock);
++ idle->last_ran = rq->niffies;
++ time_slice_expired(idle, rq);
++ idle->state = TASK_RUNNING;
++ /* Setting prio to illegal value shouldn't matter when never queued */
++ idle->prio = PRIO_LIMIT;
++
++ kasan_unpoison_task_stack(idle);
++
++#ifdef CONFIG_SMP
++ /*
++ * It's possible that init_idle() gets called multiple times on a task,
++ * in that case do_set_cpus_allowed() will not do the right thing.
++ *
++ * And since this is boot we can forgo the serialisation.
++ */
++ set_cpus_allowed_common(idle, cpumask_of(cpu));
++#ifdef CONFIG_SMT_NICE
++ idle->smt_bias = 0;
++#endif
++#endif
++ set_rq_task(rq, idle);
++
++ /* Silence PROVE_RCU */
++ rcu_read_lock();
++ set_task_cpu(idle, cpu);
++ rcu_read_unlock();
++
++ rq->curr = rq->idle = idle;
++ idle->on_rq = TASK_ON_RQ_QUEUED;
++ raw_spin_unlock(rq->lock);
++ raw_spin_unlock_irqrestore(&idle->pi_lock, flags);
++
++ /* Set the preempt count _outside_ the spinlocks! */
++ init_idle_preempt_count(idle, cpu);
++
++ ftrace_graph_init_idle_task(idle, cpu);
++ vtime_init_idle(idle, cpu);
++#ifdef CONFIG_SMP
++ sprintf(idle->comm, "%s/%d", INIT_TASK_COMM, cpu);
++#endif
++}
++
++int cpuset_cpumask_can_shrink(const struct cpumask __maybe_unused *cur,
++ const struct cpumask __maybe_unused *trial)
++{
++ return 1;
++}
++
++int task_can_attach(struct task_struct *p,
++ const struct cpumask *cs_cpus_allowed)
++{
++ int ret = 0;
++
++ /*
++ * Kthreads which disallow setaffinity shouldn't be moved
++ * to a new cpuset; we don't want to change their CPU
++ * affinity and isolating such threads by their set of
++ * allowed nodes is unnecessary. Thus, cpusets are not
++ * applicable for such threads. This prevents checking for
++ * success of set_cpus_allowed_ptr() on all attached tasks
++ * before cpus_allowed may be changed.
++ */
++ if (p->flags & PF_NO_SETAFFINITY)
++ ret = -EINVAL;
++
++ return ret;
++}
++
++void resched_cpu(int cpu)
++{
++ struct rq *rq = cpu_rq(cpu);
++ unsigned long flags;
++
++ rq_lock_irqsave(rq, &flags);
++ if (cpu_online(cpu) || cpu == smp_processor_id())
++ resched_curr(rq);
++ rq_unlock_irqrestore(rq, &flags);
++}
++
++#ifdef CONFIG_SMP
++#ifdef CONFIG_NO_HZ_COMMON
++void nohz_balance_enter_idle(int cpu)
++{
++}
++
++void select_nohz_load_balancer(int stop_tick)
++{
++}
++
++void set_cpu_sd_state_idle(void) {}
++
++/*
++ * In the semi idle case, use the nearest busy CPU for migrating timers
++ * from an idle CPU. This is good for power-savings.
++ *
++ * We don't do similar optimization for completely idle system, as
++ * selecting an idle CPU will add more delays to the timers than intended
++ * (as that CPU's timer base may not be uptodate wrt jiffies etc).
++ */
++int get_nohz_timer_target(void)
++{
++ int i, cpu = smp_processor_id();
++ struct sched_domain *sd;
++
++ if (!idle_cpu(cpu) && housekeeping_cpu(cpu, HK_FLAG_TIMER))
++ return cpu;
++
++ rcu_read_lock();
++ for_each_domain(cpu, sd) {
++ for_each_cpu(i, sched_domain_span(sd)) {
++ if (cpu == i)
++ continue;
++
++ if (!idle_cpu(i) && housekeeping_cpu(i, HK_FLAG_TIMER)) {
++ cpu = i;
++ cpu = i;
++ goto unlock;
++ }
++ }
++ }
++
++ if (!housekeeping_cpu(cpu, HK_FLAG_TIMER))
++ cpu = housekeeping_any_cpu(HK_FLAG_TIMER);
++unlock:
++ rcu_read_unlock();
++ return cpu;
++}
++
++/*
++ * When add_timer_on() enqueues a timer into the timer wheel of an
++ * idle CPU then this timer might expire before the next timer event
++ * which is scheduled to wake up that CPU. In case of a completely
++ * idle system the next event might even be infinite time into the
++ * future. wake_up_idle_cpu() ensures that the CPU is woken up and
++ * leaves the inner idle loop so the newly added timer is taken into
++ * account when the CPU goes back to idle and evaluates the timer
++ * wheel for the next timer event.
++ */
++void wake_up_idle_cpu(int cpu)
++{
++ if (cpu == smp_processor_id())
++ return;
++
++ if (set_nr_and_not_polling(cpu_rq(cpu)->idle))
++ smp_sched_reschedule(cpu);
++ else
++ trace_sched_wake_idle_without_ipi(cpu);
++}
++
++static bool wake_up_full_nohz_cpu(int cpu)
++{
++ /*
++ * We just need the target to call irq_exit() and re-evaluate
++ * the next tick. The nohz full kick at least implies that.
++ * If needed we can still optimize that later with an
++ * empty IRQ.
++ */
++ if (cpu_is_offline(cpu))
++ return true; /* Don't try to wake offline CPUs. */
++ if (tick_nohz_full_cpu(cpu)) {
++ if (cpu != smp_processor_id() ||
++ tick_nohz_tick_stopped())
++ tick_nohz_full_kick_cpu(cpu);
++ return true;
++ }
++
++ return false;
++}
++
++/*
++ * Wake up the specified CPU. If the CPU is going offline, it is the
++ * caller's responsibility to deal with the lost wakeup, for example,
++ * by hooking into the CPU_DEAD notifier like timers and hrtimers do.
++ */
++void wake_up_nohz_cpu(int cpu)
++{
++ if (!wake_up_full_nohz_cpu(cpu))
++ wake_up_idle_cpu(cpu);
++}
++#endif /* CONFIG_NO_HZ_COMMON */
++
++/*
++ * Change a given task's CPU affinity. Migrate the thread to a
++ * proper CPU and schedule it away if the CPU it's executing on
++ * is removed from the allowed bitmask.
++ *
++ * NOTE: the caller must have a valid reference to the task, the
++ * task must not exit() & deallocate itself prematurely. The
++ * call is not atomic; no spinlocks may be held.
++ */
++static int __set_cpus_allowed_ptr(struct task_struct *p,
++ const struct cpumask *new_mask, bool check)
++{
++ const struct cpumask *cpu_valid_mask = cpu_active_mask;
++ bool queued = false, running_wrong = false, kthread;
++ struct cpumask old_mask;
++ unsigned long flags;
++ int cpu, ret = 0;
++ struct rq *rq;
++
++ rq = task_rq_lock(p, &flags);
++ update_rq_clock(rq);
++
++ kthread = !!(p->flags & PF_KTHREAD);
++ if (kthread) {
++ /*
++ * Kernel threads are allowed on online && !active CPUs
++ */
++ cpu_valid_mask = cpu_online_mask;
++ }
++
++ /*
++ * Must re-check here, to close a race against __kthread_bind(),
++ * sched_setaffinity() is not guaranteed to observe the flag.
++ */
++ if (check && (p->flags & PF_NO_SETAFFINITY)) {
++ ret = -EINVAL;
++ goto out;
++ }
++
++ cpumask_copy(&old_mask, &p->cpus_allowed);
++ if (cpumask_equal(&old_mask, new_mask))
++ goto out;
++
++ if (!cpumask_intersects(new_mask, cpu_valid_mask)) {
++ ret = -EINVAL;
++ goto out;
++ }
++
++ queued = task_queued(p);
++ __do_set_cpus_allowed(p, new_mask);
++
++ if (kthread) {
++ /*
++ * For kernel threads that do indeed end up on online &&
++ * !active we want to ensure they are strict per-CPU threads.
++ */
++ WARN_ON(cpumask_intersects(new_mask, cpu_online_mask) &&
++ !cpumask_intersects(new_mask, cpu_active_mask) &&
++ p->nr_cpus_allowed != 1);
++ }
++
++ /* Can the task run on the task's current CPU? If so, we're done */
++ if (cpumask_test_cpu(task_cpu(p), new_mask))
++ goto out;
++
++ if (task_running(rq, p)) {
++ /* Task is running on the wrong cpu now, reschedule it. */
++ if (rq == this_rq()) {
++ cpu = cpumask_any_and(cpu_valid_mask, new_mask);
++ set_task_cpu(p, cpu);
++ set_tsk_need_resched(p);
++ running_wrong = true;
++ } else
++ resched_task(p);
++ } else {
++ cpu = cpumask_any_and(cpu_valid_mask, new_mask);
++ if (queued) {
++ /*
++ * Switch runqueue locks after dequeueing the task
++ * here while still holding the pi_lock to be holding
++ * the correct lock for enqueueing.
++ */
++ dequeue_task(rq, p, 0);
++ rq_unlock(rq);
++
++ rq = cpu_rq(cpu);
++ rq_lock(rq);
++ }
++ set_task_cpu(p, cpu);
++ if (queued)
++ enqueue_task(rq, p, 0);
++ }
++ if (queued)
++ try_preempt(p, rq);
++ if (running_wrong)
++ preempt_disable();
++out:
++ task_rq_unlock(rq, p, &flags);
++
++ if (running_wrong) {
++ __schedule(true);
++ preempt_enable();
++ }
++
++ return ret;
++}
++
++int set_cpus_allowed_ptr(struct task_struct *p, const struct cpumask *new_mask)
++{
++ return __set_cpus_allowed_ptr(p, new_mask, false);
++}
++EXPORT_SYMBOL_GPL(set_cpus_allowed_ptr);
++
++#ifdef CONFIG_HOTPLUG_CPU
++/*
++ * Run through task list and find tasks affined to the dead cpu, then remove
++ * that cpu from the list, enable cpu0 and set the zerobound flag. Must hold
++ * cpu 0 and src_cpu's runqueue locks.
++ */
++static void bind_zero(int src_cpu)
++{
++ struct task_struct *p, *t;
++ struct rq *rq0;
++ int bound = 0;
++
++ if (src_cpu == 0)
++ return;
++
++ rq0 = cpu_rq(0);
++
++ do_each_thread(t, p) {
++ if (cpumask_test_cpu(src_cpu, &p->cpus_allowed)) {
++ bool local = (task_cpu(p) == src_cpu);
++ struct rq *rq = task_rq(p);
++
++ /* task_running is the cpu stopper thread */
++ if (local && task_running(rq, p))
++ continue;
++ atomic_clear_cpu(src_cpu, &p->cpus_allowed);
++ atomic_set_cpu(0, &p->cpus_allowed);
++ p->zerobound = true;
++ bound++;
++ if (local) {
++ bool queued = task_queued(p);
++
++ if (queued)
++ dequeue_task(rq, p, 0);
++ set_task_cpu(p, 0);
++ if (queued)
++ enqueue_task(rq0, p, 0);
++ }
++ }
++ } while_each_thread(t, p);
++
++ if (bound) {
++ printk(KERN_INFO "Removed affinity for %d processes to cpu %d\n",
++ bound, src_cpu);
++ }
++}
++
++/* Find processes with the zerobound flag and reenable their affinity for the
++ * CPU coming alive. */
++static void unbind_zero(int src_cpu)
++{
++ int unbound = 0, zerobound = 0;
++ struct task_struct *p, *t;
++
++ if (src_cpu == 0)
++ return;
++
++ do_each_thread(t, p) {
++ if (!p->mm)
++ p->zerobound = false;
++ if (p->zerobound) {
++ unbound++;
++ cpumask_set_cpu(src_cpu, &p->cpus_allowed);
++ /* Once every CPU affinity has been re-enabled, remove
++ * the zerobound flag */
++ if (cpumask_subset(cpu_possible_mask, &p->cpus_allowed)) {
++ p->zerobound = false;
++ zerobound++;
++ }
++ }
++ } while_each_thread(t, p);
++
++ if (unbound) {
++ printk(KERN_INFO "Added affinity for %d processes to cpu %d\n",
++ unbound, src_cpu);
++ }
++ if (zerobound) {
++ printk(KERN_INFO "Released forced binding to cpu0 for %d processes\n",
++ zerobound);
++ }
++}
++
++/*
++ * Ensure that the idle task is using init_mm right before its cpu goes
++ * offline.
++ */
++void idle_task_exit(void)
++{
++ struct mm_struct *mm = current->active_mm;
++
++ BUG_ON(cpu_online(smp_processor_id()));
++
++ if (mm != &init_mm) {
++ switch_mm(mm, &init_mm, current);
++ current->active_mm = &init_mm;
++ finish_arch_post_lock_switch();
++ }
++ mmdrop(mm);
++}
++#else /* CONFIG_HOTPLUG_CPU */
++static void unbind_zero(int src_cpu) {}
++#endif /* CONFIG_HOTPLUG_CPU */
++
++void sched_set_stop_task(int cpu, struct task_struct *stop)
++{
++ struct sched_param stop_param = { .sched_priority = STOP_PRIO };
++ struct sched_param start_param = { .sched_priority = 0 };
++ struct task_struct *old_stop = cpu_rq(cpu)->stop;
++
++ if (stop) {
++ /*
++ * Make it appear like a SCHED_FIFO task, its something
++ * userspace knows about and won't get confused about.
++ *
++ * Also, it will make PI more or less work without too
++ * much confusion -- but then, stop work should not
++ * rely on PI working anyway.
++ */
++ sched_setscheduler_nocheck(stop, SCHED_FIFO, &stop_param);
++ }
++
++ cpu_rq(cpu)->stop = stop;
++
++ if (old_stop) {
++ /*
++ * Reset it back to a normal scheduling policy so that
++ * it can die in pieces.
++ */
++ sched_setscheduler_nocheck(old_stop, SCHED_NORMAL, &start_param);
++ }
++}
++
++#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SYSCTL)
++
++static struct ctl_table sd_ctl_dir[] = {
++ {
++ .procname = "sched_domain",
++ .mode = 0555,
++ },
++ {}
++};
++
++static struct ctl_table sd_ctl_root[] = {
++ {
++ .procname = "kernel",
++ .mode = 0555,
++ .child = sd_ctl_dir,
++ },
++ {}
++};
++
++static struct ctl_table *sd_alloc_ctl_entry(int n)
++{
++ struct ctl_table *entry =
++ kcalloc(n, sizeof(struct ctl_table), GFP_KERNEL);
++
++ return entry;
++}
++
++static void sd_free_ctl_entry(struct ctl_table **tablep)
++{
++ struct ctl_table *entry;
++
++ /*
++ * In the intermediate directories, both the child directory and
++ * procname are dynamically allocated and could fail but the mode
++ * will always be set. In the lowest directory the names are
++ * static strings and all have proc handlers.
++ */
++ for (entry = *tablep; entry->mode; entry++) {
++ if (entry->child)
++ sd_free_ctl_entry(&entry->child);
++ if (entry->proc_handler == NULL)
++ kfree(entry->procname);
++ }
++
++ kfree(*tablep);
++ *tablep = NULL;
++}
++
++#define CPU_LOAD_IDX_MAX 5
++static int min_load_idx = 0;
++static int max_load_idx = CPU_LOAD_IDX_MAX-1;
++
++static void
++set_table_entry(struct ctl_table *entry,
++ const char *procname, void *data, int maxlen,
++ umode_t mode, proc_handler *proc_handler,
++ bool load_idx)
++{
++ entry->procname = procname;
++ entry->data = data;
++ entry->maxlen = maxlen;
++ entry->mode = mode;
++ entry->proc_handler = proc_handler;
++
++ if (load_idx) {
++ entry->extra1 = &min_load_idx;
++ entry->extra2 = &max_load_idx;
++ }
++}
++
++static struct ctl_table *
++sd_alloc_ctl_domain_table(struct sched_domain *sd)
++{
++ struct ctl_table *table = sd_alloc_ctl_entry(14);
++
++ if (table == NULL)
++ return NULL;
++
++ set_table_entry(&table[0], "min_interval", &sd->min_interval,
++ sizeof(long), 0644, proc_doulongvec_minmax, false);
++ set_table_entry(&table[1], "max_interval", &sd->max_interval,
++ sizeof(long), 0644, proc_doulongvec_minmax, false);
++ set_table_entry(&table[2], "busy_idx", &sd->busy_idx,
++ sizeof(int), 0644, proc_dointvec_minmax, true);
++ set_table_entry(&table[3], "idle_idx", &sd->idle_idx,
++ sizeof(int), 0644, proc_dointvec_minmax, true);
++ set_table_entry(&table[4], "newidle_idx", &sd->newidle_idx,
++ sizeof(int), 0644, proc_dointvec_minmax, true);
++ set_table_entry(&table[5], "wake_idx", &sd->wake_idx,
++ sizeof(int), 0644, proc_dointvec_minmax, true);
++ set_table_entry(&table[6], "forkexec_idx", &sd->forkexec_idx,
++ sizeof(int), 0644, proc_dointvec_minmax, true);
++ set_table_entry(&table[7], "busy_factor", &sd->busy_factor,
++ sizeof(int), 0644, proc_dointvec_minmax, false);
++ set_table_entry(&table[8], "imbalance_pct", &sd->imbalance_pct,
++ sizeof(int), 0644, proc_dointvec_minmax, false);
++ set_table_entry(&table[9], "cache_nice_tries",
++ &sd->cache_nice_tries,
++ sizeof(int), 0644, proc_dointvec_minmax, false);
++ set_table_entry(&table[10], "flags", &sd->flags,
++ sizeof(int), 0644, proc_dointvec_minmax, false);
++ set_table_entry(&table[11], "max_newidle_lb_cost",
++ &sd->max_newidle_lb_cost,
++ sizeof(long), 0644, proc_doulongvec_minmax, false);
++ set_table_entry(&table[12], "name", sd->name,
++ CORENAME_MAX_SIZE, 0444, proc_dostring, false);
++ /* &table[13] is terminator */
++
++ return table;
++}
++
++static struct ctl_table *sd_alloc_ctl_cpu_table(int cpu)
++{
++ struct ctl_table *entry, *table;
++ struct sched_domain *sd;
++ int domain_num = 0, i;
++ char buf[32];
++
++ for_each_domain(cpu, sd)
++ domain_num++;
++ entry = table = sd_alloc_ctl_entry(domain_num + 1);
++ if (table == NULL)
++ return NULL;
++
++ i = 0;
++ for_each_domain(cpu, sd) {
++ snprintf(buf, 32, "domain%d", i);
++ entry->procname = kstrdup(buf, GFP_KERNEL);
++ entry->mode = 0555;
++ entry->child = sd_alloc_ctl_domain_table(sd);
++ entry++;
++ i++;
++ }
++ return table;
++}
++
++static cpumask_var_t sd_sysctl_cpus;
++static struct ctl_table_header *sd_sysctl_header;
++
++void register_sched_domain_sysctl(void)
++{
++ static struct ctl_table *cpu_entries;
++ static struct ctl_table **cpu_idx;
++ char buf[32];
++ int i;
++
++ if (!cpu_entries) {
++ cpu_entries = sd_alloc_ctl_entry(num_possible_cpus() + 1);
++ if (!cpu_entries)
++ return;
++
++ WARN_ON(sd_ctl_dir[0].child);
++ sd_ctl_dir[0].child = cpu_entries;
++ }
++
++ if (!cpu_idx) {
++ struct ctl_table *e = cpu_entries;
++
++ cpu_idx = kcalloc(nr_cpu_ids, sizeof(struct ctl_table*), GFP_KERNEL);
++ if (!cpu_idx)
++ return;
++
++ /* deal with sparse possible map */
++ for_each_possible_cpu(i) {
++ cpu_idx[i] = e;
++ e++;
++ }
++ }
++
++ if (!cpumask_available(sd_sysctl_cpus)) {
++ if (!alloc_cpumask_var(&sd_sysctl_cpus, GFP_KERNEL))
++ return;
++
++ /* init to possible to not have holes in @cpu_entries */
++ cpumask_copy(sd_sysctl_cpus, cpu_possible_mask);
++ }
++
++ for_each_cpu(i, sd_sysctl_cpus) {
++ struct ctl_table *e = cpu_idx[i];
++
++ if (e->child)
++ sd_free_ctl_entry(&e->child);
++
++ if (!e->procname) {
++ snprintf(buf, 32, "cpu%d", i);
++ e->procname = kstrdup(buf, GFP_KERNEL);
++ }
++ e->mode = 0555;
++ e->child = sd_alloc_ctl_cpu_table(i);
++
++ __cpumask_clear_cpu(i, sd_sysctl_cpus);
++ }
++
++ WARN_ON(sd_sysctl_header);
++ sd_sysctl_header = register_sysctl_table(sd_ctl_root);
++}
++
++void dirty_sched_domain_sysctl(int cpu)
++{
++ if (cpumask_available(sd_sysctl_cpus))
++ __cpumask_set_cpu(cpu, sd_sysctl_cpus);
++}
++
++/* may be called multiple times per register */
++void unregister_sched_domain_sysctl(void)
++{
++ unregister_sysctl_table(sd_sysctl_header);
++ sd_sysctl_header = NULL;
++}
++#endif /* CONFIG_SYSCTL */
++
++void set_rq_online(struct rq *rq)
++{
++ if (!rq->online) {
++ cpumask_set_cpu(cpu_of(rq), rq->rd->online);
++ rq->online = true;
++ }
++}
++
++void set_rq_offline(struct rq *rq)
++{
++ if (rq->online) {
++ int cpu = cpu_of(rq);
++
++ cpumask_clear_cpu(cpu, rq->rd->online);
++ rq->online = false;
++ clear_cpuidle_map(cpu);
++ }
++}
++
++/*
++ * used to mark begin/end of suspend/resume:
++ */
++static int num_cpus_frozen;
++
++/*
++ * Update cpusets according to cpu_active mask. If cpusets are
++ * disabled, cpuset_update_active_cpus() becomes a simple wrapper
++ * around partition_sched_domains().
++ *
++ * If we come here as part of a suspend/resume, don't touch cpusets because we
++ * want to restore it back to its original state upon resume anyway.
++ */
++static void cpuset_cpu_active(void)
++{
++ if (cpuhp_tasks_frozen) {
++ /*
++ * num_cpus_frozen tracks how many CPUs are involved in suspend
++ * resume sequence. As long as this is not the last online
++ * operation in the resume sequence, just build a single sched
++ * domain, ignoring cpusets.
++ */
++ partition_sched_domains(1, NULL, NULL);
++ if (--num_cpus_frozen)
++ return;
++ /*
++ * This is the last CPU online operation. So fall through and
++ * restore the original sched domains by considering the
++ * cpuset configurations.
++ */
++ cpuset_force_rebuild();
++ }
++
++ cpuset_update_active_cpus();
++}
++
++static int cpuset_cpu_inactive(unsigned int cpu)
++{
++ if (!cpuhp_tasks_frozen) {
++ cpuset_update_active_cpus();
++ } else {
++ num_cpus_frozen++;
++ partition_sched_domains(1, NULL, NULL);
++ }
++ return 0;
++}
++
++int sched_cpu_activate(unsigned int cpu)
++{
++ struct rq *rq = cpu_rq(cpu);
++ unsigned long flags;
++
++ set_cpu_active(cpu, true);
++
++ if (sched_smp_initialized) {
++ sched_domains_numa_masks_set(cpu);
++ cpuset_cpu_active();
++ }
++
++ /*
++ * Put the rq online, if not already. This happens:
++ *
++ * 1) In the early boot process, because we build the real domains
++ * after all CPUs have been brought up.
++ *
++ * 2) At runtime, if cpuset_cpu_active() fails to rebuild the
++ * domains.
++ */
++ rq_lock_irqsave(rq, &flags);
++ if (rq->rd) {
++ BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
++ set_rq_online(rq);
++ }
++ unbind_zero(cpu);
++ rq_unlock_irqrestore(rq, &flags);
++
++ return 0;
++}
++
++int sched_cpu_deactivate(unsigned int cpu)
++{
++ int ret;
++
++ set_cpu_active(cpu, false);
++ /*
++ * We've cleared cpu_active_mask, wait for all preempt-disabled and RCU
++ * users of this state to go away such that all new such users will
++ * observe it.
++ *
++ * Do sync before park smpboot threads to take care the rcu boost case.
++ */
++ synchronize_rcu_mult(call_rcu, call_rcu_sched);
++
++ if (!sched_smp_initialized)
++ return 0;
++
++ ret = cpuset_cpu_inactive(cpu);
++ if (ret) {
++ set_cpu_active(cpu, true);
++ return ret;
++ }
++ sched_domains_numa_masks_clear(cpu);
++ return 0;
++}
++
++int sched_cpu_starting(unsigned int cpu)
++{
++ sched_tick_start(cpu);
++ return 0;
++}
++
++#ifdef CONFIG_HOTPLUG_CPU
++int sched_cpu_dying(unsigned int cpu)
++{
++ struct rq *rq = cpu_rq(cpu);
++ unsigned long flags;
++
++ /* Handle pending wakeups and then migrate everything off */
++ sched_ttwu_pending();
++ sched_tick_stop(cpu);
++
++ local_irq_save(flags);
++ double_rq_lock(rq, cpu_rq(0));
++ if (rq->rd) {
++ BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
++ set_rq_offline(rq);
++ }
++ bind_zero(cpu);
++ double_rq_unlock(rq, cpu_rq(0));
++ sched_start_tick(rq, cpu);
++ hrexpiry_clear(rq);
++ local_irq_restore(flags);
++
++ return 0;
++}
++#endif
++
++#if defined(CONFIG_SCHED_SMT) || defined(CONFIG_SCHED_MC)
++/*
++ * Cheaper version of the below functions in case support for SMT and MC is
++ * compiled in but CPUs have no siblings.
++ */
++static bool sole_cpu_idle(struct rq *rq)
++{
++ return rq_idle(rq);
++}
++#endif
++#ifdef CONFIG_SCHED_SMT
++static const cpumask_t *thread_cpumask(int cpu)
++{
++ return topology_sibling_cpumask(cpu);
++}
++/* All this CPU's SMT siblings are idle */
++static bool siblings_cpu_idle(struct rq *rq)
++{
++ return cpumask_subset(&rq->thread_mask, &cpu_idle_map);
++}
++#endif
++#ifdef CONFIG_SCHED_MC
++static const cpumask_t *core_cpumask(int cpu)
++{
++ return topology_core_cpumask(cpu);
++}
++/* All this CPU's shared cache siblings are idle */
++static bool cache_cpu_idle(struct rq *rq)
++{
++ return cpumask_subset(&rq->core_mask, &cpu_idle_map);
++}
++#endif
++
++enum sched_domain_level {
++ SD_LV_NONE = 0,
++ SD_LV_SIBLING,
++ SD_LV_MC,
++ SD_LV_BOOK,
++ SD_LV_CPU,
++ SD_LV_NODE,
++ SD_LV_ALLNODES,
++ SD_LV_MAX
++};
++
++void __init sched_init_smp(void)
++{
++ struct rq *rq, *other_rq, *leader;
++ struct sched_domain *sd;
++ int cpu, other_cpu, i;
++#ifdef CONFIG_SCHED_SMT
++ bool smt_threads = false;
++#endif
++ sched_init_numa();
++
++ /*
++ * There's no userspace yet to cause hotplug operations; hence all the
++ * cpu masks are stable and all blatant races in the below code cannot
++ * happen.
++ */
++ mutex_lock(&sched_domains_mutex);
++ sched_init_domains(cpu_active_mask);
++ mutex_unlock(&sched_domains_mutex);
++
++ /* Move init over to a non-isolated CPU */
++ if (set_cpus_allowed_ptr(current, housekeeping_cpumask(HK_FLAG_DOMAIN)) < 0)
++ BUG();
++
++ mutex_lock(&sched_domains_mutex);
++ local_irq_disable();
++ lock_all_rqs();
++ /*
++ * Set up the relative cache distance of each online cpu from each
++ * other in a simple array for quick lookup. Locality is determined
++ * by the closest sched_domain that CPUs are separated by. CPUs with
++ * shared cache in SMT and MC are treated as local. Separate CPUs
++ * (within the same package or physically) within the same node are
++ * treated as not local. CPUs not even in the same domain (different
++ * nodes) are treated as very distant.
++ */
++ for_each_online_cpu(cpu) {
++ rq = cpu_rq(cpu);
++
++ /* First check if this cpu is in the same node */
++ for_each_domain(cpu, sd) {
++ if (sd->level > SD_LV_MC)
++ continue;
++ leader = NULL;
++ /* Set locality to local node if not already found lower */
++ for_each_cpu(other_cpu, sched_domain_span(sd)) {
++ if (rqshare == RQSHARE_SMP) {
++ other_rq = cpu_rq(other_cpu);
++
++ /* Set the smp_leader to the first CPU */
++ if (!leader)
++ leader = rq;
++ other_rq->smp_leader = leader;
++ }
++
++ if (rq->cpu_locality[other_cpu] > 3)
++ rq->cpu_locality[other_cpu] = 3;
++ }
++ }
++
++ /*
++ * Each runqueue has its own function in case it doesn't have
++ * siblings of its own allowing mixed topologies.
++ */
++#ifdef CONFIG_SCHED_MC
++ leader = NULL;
++ if (cpumask_weight(core_cpumask(cpu)) > 1) {
++ cpumask_copy(&rq->core_mask, core_cpumask(cpu));
++ cpumask_clear_cpu(cpu, &rq->core_mask);
++ for_each_cpu(other_cpu, core_cpumask(cpu)) {
++ if (rqshare == RQSHARE_MC) {
++ other_rq = cpu_rq(other_cpu);
++
++ /* Set the mc_leader to the first CPU */
++ if (!leader)
++ leader = rq;
++ other_rq->mc_leader = leader;
++ }
++ if (rq->cpu_locality[other_cpu] > 2)
++ rq->cpu_locality[other_cpu] = 2;
++ }
++ rq->cache_idle = cache_cpu_idle;
++ }
++#endif
++#ifdef CONFIG_SCHED_SMT
++ leader = NULL;
++ if (cpumask_weight(thread_cpumask(cpu)) > 1) {
++ cpumask_copy(&rq->thread_mask, thread_cpumask(cpu));
++ cpumask_clear_cpu(cpu, &rq->thread_mask);
++ for_each_cpu(other_cpu, thread_cpumask(cpu)) {
++ if (rqshare == RQSHARE_SMT) {
++ other_rq = cpu_rq(other_cpu);
++
++ /* Set the smt_leader to the first CPU */
++ if (!leader)
++ leader = rq;
++ other_rq->smt_leader = leader;
++ }
++ if (rq->cpu_locality[other_cpu] > 1)
++ rq->cpu_locality[other_cpu] = 1;
++ }
++ rq->siblings_idle = siblings_cpu_idle;
++ smt_threads = true;
++ }
++#endif
++ }
++
++#ifdef CONFIG_SMT_NICE
++ if (smt_threads) {
++ check_siblings = &check_smt_siblings;
++ wake_siblings = &wake_smt_siblings;
++ smt_schedule = &smt_should_schedule;
++ }
++#endif
++ unlock_all_rqs();
++ local_irq_enable();
++ mutex_unlock(&sched_domains_mutex);
++
++ for_each_online_cpu(cpu) {
++ rq = cpu_rq(cpu);
++
++ for_each_online_cpu(other_cpu) {
++ if (other_cpu <= cpu)
++ continue;
++ printk(KERN_DEBUG "MuQSS locality CPU %d to %d: %d\n", cpu, other_cpu, rq->cpu_locality[other_cpu]);
++ }
++ }
++
++ for_each_online_cpu(cpu) {
++ rq = cpu_rq(cpu);
++ leader = rq->smp_leader;
++
++ rq_lock(rq);
++ if (leader && rq != leader) {
++ printk(KERN_INFO "Sharing SMP runqueue from CPU %d to CPU %d\n",
++ leader->cpu, rq->cpu);
++ kfree(rq->node);
++ kfree(rq->sl);
++ kfree(rq->lock);
++ rq->node = leader->node;
++ rq->sl = leader->sl;
++ rq->lock = leader->lock;
++ barrier();
++ /* To make up for not unlocking the freed runlock */
++ preempt_enable();
++ } else
++ rq_unlock(rq);
++ }
++
++#ifdef CONFIG_SCHED_MC
++ for_each_online_cpu(cpu) {
++ rq = cpu_rq(cpu);
++ leader = rq->mc_leader;
++
++ rq_lock(rq);
++ if (leader && rq != leader) {
++ printk(KERN_INFO "Sharing MC runqueue from CPU %d to CPU %d\n",
++ leader->cpu, rq->cpu);
++ kfree(rq->node);
++ kfree(rq->sl);
++ kfree(rq->lock);
++ rq->node = leader->node;
++ rq->sl = leader->sl;
++ rq->lock = leader->lock;
++ barrier();
++ /* To make up for not unlocking the freed runlock */
++ preempt_enable();
++ } else
++ rq_unlock(rq);
++ }
++#endif /* CONFIG_SCHED_MC */
++
++#ifdef CONFIG_SCHED_SMT
++ for_each_online_cpu(cpu) {
++ rq = cpu_rq(cpu);
++
++ leader = rq->smt_leader;
++
++ rq_lock(rq);
++ if (leader && rq != leader) {
++ printk(KERN_INFO "Sharing SMT runqueue from CPU %d to CPU %d\n",
++ leader->cpu, rq->cpu);
++ kfree(rq->node);
++ kfree(rq->sl);
++ kfree(rq->lock);
++ rq->node = leader->node;
++ rq->sl = leader->sl;
++ rq->lock = leader->lock;
++ barrier();
++ /* To make up for not unlocking the freed runlock */
++ preempt_enable();
++ } else
++ rq_unlock(rq);
++ }
++#endif /* CONFIG_SCHED_SMT */
++
++ total_runqueues = 0;
++ for_each_possible_cpu(cpu) {
++ int locality, total_rqs = 0, total_cpus = 0;
++
++ rq = cpu_rq(cpu);
++ if (
++#ifdef CONFIG_SCHED_MC
++ (rq->mc_leader == rq) &&
++#endif
++#ifdef CONFIG_SCHED_SMT
++ (rq->smt_leader == rq) &&
++#endif
++ (rq->smp_leader == rq))
++ total_runqueues++;
++
++ for (locality = 0; locality <= 4; locality++) {
++ int test_cpu;
++
++ for_each_possible_cpu(test_cpu) {
++ /* Work from each CPU up instead of every rq
++ * starting at CPU 0 */
++ other_cpu = test_cpu + cpu;
++ other_cpu %= num_possible_cpus();
++ other_rq = cpu_rq(other_cpu);
++
++ if (rq->cpu_locality[other_cpu] == locality) {
++ rq->cpu_order[total_cpus++] = other_rq;
++ if (
++
++#ifdef CONFIG_SCHED_MC
++ (other_rq->mc_leader == other_rq) &&
++#endif
++#ifdef CONFIG_SCHED_SMT
++ (other_rq->smt_leader == other_rq) &&
++#endif
++ (other_rq->smp_leader == other_rq))
++ rq->rq_order[total_rqs++] = other_rq;
++ }
++ }
++ }
++ }
++
++ for_each_possible_cpu(cpu) {
++ rq = cpu_rq(cpu);
++ for (i = 0; i < total_runqueues; i++) {
++ printk(KERN_DEBUG "CPU %d RQ order %d RQ %d\n", cpu, i,
++ rq->rq_order[i]->cpu);
++ }
++ }
++ for_each_possible_cpu(cpu) {
++ rq = cpu_rq(cpu);
++ for (i = 0; i < num_possible_cpus(); i++) {
++ printk(KERN_DEBUG "CPU %d CPU order %d RQ %d\n", cpu, i,
++ rq->cpu_order[i]->cpu);
++ }
++ }
++ switch (rqshare) {
++ case RQSHARE_SMP:
++ printk(KERN_INFO "MuQSS runqueue share type SMP total runqueues: %d\n",
++ total_runqueues);
++ break;
++ case RQSHARE_MC:
++ printk(KERN_INFO "MuQSS runqueue share type MC total runqueues: %d\n",
++ total_runqueues);
++ break;
++ case RQSHARE_SMT:
++ printk(KERN_INFO "MuQSS runqueue share type SMT total runqueues: %d\n",
++ total_runqueues);
++ break;
++ case RQSHARE_NONE:
++ printk(KERN_INFO "MuQSS runqueue share type none total runqueues: %d\n",
++ total_runqueues);
++ break;
++ }
++
++ sched_smp_initialized = true;
++}
++#else
++void __init sched_init_smp(void)
++{
++ sched_smp_initialized = true;
++}
++#endif /* CONFIG_SMP */
++
++int in_sched_functions(unsigned long addr)
++{
++ return in_lock_functions(addr) ||
++ (addr >= (unsigned long)__sched_text_start
++ && addr < (unsigned long)__sched_text_end);
++}
++
++#ifdef CONFIG_CGROUP_SCHED
++/* task group related information */
++struct task_group {
++ struct cgroup_subsys_state css;
++
++ struct rcu_head rcu;
++ struct list_head list;
++
++ struct task_group *parent;
++ struct list_head siblings;
++ struct list_head children;
++};
++
++/*
++ * Default task group.
++ * Every task in system belongs to this group at bootup.
++ */
++struct task_group root_task_group;
++LIST_HEAD(task_groups);
++
++/* Cacheline aligned slab cache for task_group */
++static struct kmem_cache *task_group_cache __read_mostly;
++#endif /* CONFIG_CGROUP_SCHED */
++
++void __init sched_init(void)
++{
++#ifdef CONFIG_SMP
++ int cpu_ids;
++#endif
++ int i;
++ struct rq *rq;
++
++ wait_bit_init();
++
++ prio_ratios[0] = 128;
++ for (i = 1 ; i < NICE_WIDTH ; i++)
++ prio_ratios[i] = prio_ratios[i - 1] * 11 / 10;
++
++ skiplist_node_init(&init_task.node);
++
++#ifdef CONFIG_SMP
++ init_defrootdomain();
++ cpumask_clear(&cpu_idle_map);
++#else
++ uprq = &per_cpu(runqueues, 0);
++#endif
++
++#ifdef CONFIG_CGROUP_SCHED
++ task_group_cache = KMEM_CACHE(task_group, 0);
++
++ list_add(&root_task_group.list, &task_groups);
++ INIT_LIST_HEAD(&root_task_group.children);
++ INIT_LIST_HEAD(&root_task_group.siblings);
++#endif /* CONFIG_CGROUP_SCHED */
++ for_each_possible_cpu(i) {
++ rq = cpu_rq(i);
++ rq->node = kmalloc(sizeof(skiplist_node), GFP_ATOMIC);
++ skiplist_init(rq->node);
++ rq->sl = new_skiplist(rq->node);
++ rq->lock = kmalloc(sizeof(raw_spinlock_t), GFP_ATOMIC);
++ raw_spin_lock_init(rq->lock);
++ rq->nr_running = 0;
++ rq->nr_uninterruptible = 0;
++ rq->nr_switches = 0;
++ rq->clock = rq->old_clock = rq->last_niffy = rq->niffies = 0;
++ rq->last_jiffy = jiffies;
++ rq->user_ns = rq->nice_ns = rq->softirq_ns = rq->system_ns =
++ rq->iowait_ns = rq->idle_ns = 0;
++ rq->dither = 0;
++ set_rq_task(rq, &init_task);
++ rq->iso_ticks = 0;
++ rq->iso_refractory = false;
++#ifdef CONFIG_SMP
++ rq->smp_leader = rq;
++#ifdef CONFIG_SCHED_MC
++ rq->mc_leader = rq;
++#endif
++#ifdef CONFIG_SCHED_SMT
++ rq->smt_leader = rq;
++#endif
++ rq->sd = NULL;
++ rq->rd = NULL;
++ rq->online = false;
++ rq->cpu = i;
++ rq_attach_root(rq, &def_root_domain);
++#endif
++ init_rq_hrexpiry(rq);
++ atomic_set(&rq->nr_iowait, 0);
++ }
++
++#ifdef CONFIG_SMP
++ cpu_ids = i;
++ /*
++ * Set the base locality for cpu cache distance calculation to
++ * "distant" (3). Make sure the distance from a CPU to itself is 0.
++ */
++ for_each_possible_cpu(i) {
++ int j;
++
++ rq = cpu_rq(i);
++#ifdef CONFIG_SCHED_SMT
++ rq->siblings_idle = sole_cpu_idle;
++#endif
++#ifdef CONFIG_SCHED_MC
++ rq->cache_idle = sole_cpu_idle;
++#endif
++ rq->cpu_locality = kmalloc(cpu_ids * sizeof(int *), GFP_ATOMIC);
++ for_each_possible_cpu(j) {
++ if (i == j)
++ rq->cpu_locality[j] = 0;
++ else
++ rq->cpu_locality[j] = 4;
++ }
++ rq->rq_order = kmalloc(cpu_ids * sizeof(struct rq *), GFP_ATOMIC);
++ rq->cpu_order = kmalloc(cpu_ids * sizeof(struct rq *), GFP_ATOMIC);
++ rq->rq_order[0] = rq->cpu_order[0] = rq;
++ for (j = 1; j < cpu_ids; j++)
++ rq->rq_order[j] = rq->cpu_order[j] = cpu_rq(j);
++ }
++#endif
++
++ /*
++ * The boot idle thread does lazy MMU switching as well:
++ */
++ mmgrab(&init_mm);
++ enter_lazy_tlb(&init_mm, current);
++
++ /*
++ * Make us the idle thread. Technically, schedule() should not be
++ * called from this thread, however somewhere below it might be,
++ * but because we are the idle thread, we just pick up running again
++ * when this runqueue becomes "idle".
++ */
++ init_idle(current, smp_processor_id());
++
++#ifdef CONFIG_SMP
++ idle_thread_set_boot_cpu();
++#endif /* SMP */
++
++ init_schedstats();
++}
++
++#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
++static inline int preempt_count_equals(int preempt_offset)
++{
++ int nested = preempt_count() + rcu_preempt_depth();
++
++ return (nested == preempt_offset);
++}
++
++void __might_sleep(const char *file, int line, int preempt_offset)
++{
++ /*
++ * Blocking primitives will set (and therefore destroy) current->state,
++ * since we will exit with TASK_RUNNING make sure we enter with it,
++ * otherwise we will destroy state.
++ */
++ WARN_ONCE(current->state != TASK_RUNNING && current->task_state_change,
++ "do not call blocking ops when !TASK_RUNNING; "
++ "state=%lx set at [<%p>] %pS\n",
++ current->state,
++ (void *)current->task_state_change,
++ (void *)current->task_state_change);
++
++ ___might_sleep(file, line, preempt_offset);
++}
++EXPORT_SYMBOL(__might_sleep);
++
++void ___might_sleep(const char *file, int line, int preempt_offset)
++{
++ /* Ratelimiting timestamp: */
++ static unsigned long prev_jiffy;
++
++ unsigned long preempt_disable_ip;
++
++ /* WARN_ON_ONCE() by default, no rate limit required: */
++ rcu_sleep_check();
++
++ if ((preempt_count_equals(preempt_offset) && !irqs_disabled() &&
++ !is_idle_task(current)) ||
++ system_state == SYSTEM_BOOTING || system_state > SYSTEM_RUNNING ||
++ oops_in_progress)
++ return;
++
++ if (time_before(jiffies, prev_jiffy + HZ) && prev_jiffy)
++ return;
++ prev_jiffy = jiffies;
++
++ /* Save this before calling printk(), since that will clobber it: */
++ preempt_disable_ip = get_preempt_disable_ip(current);
++
++ printk(KERN_ERR
++ "BUG: sleeping function called from invalid context at %s:%d\n",
++ file, line);
++ printk(KERN_ERR
++ "in_atomic(): %d, irqs_disabled(): %d, pid: %d, name: %s\n",
++ in_atomic(), irqs_disabled(),
++ current->pid, current->comm);
++
++ if (task_stack_end_corrupted(current))
++ printk(KERN_EMERG "Thread overran stack, or stack corrupted\n");
++
++ debug_show_held_locks(current);
++ if (irqs_disabled())
++ print_irqtrace_events(current);
++ if (IS_ENABLED(CONFIG_DEBUG_PREEMPT)
++ && !preempt_count_equals(preempt_offset)) {
++ pr_err("Preemption disabled at:");
++ print_ip_sym(preempt_disable_ip);
++ pr_cont("\n");
++ }
++ dump_stack();
++ add_taint(TAINT_WARN, LOCKDEP_STILL_OK);
++}
++EXPORT_SYMBOL(___might_sleep);
++#endif
++
++#ifdef CONFIG_MAGIC_SYSRQ
++static inline void normalise_rt_tasks(void)
++{
++ struct task_struct *g, *p;
++ unsigned long flags;
++ struct rq *rq;
++
++ read_lock(&tasklist_lock);
++ for_each_process_thread(g, p) {
++ /*
++ * Only normalize user tasks:
++ */
++ if (p->flags & PF_KTHREAD)
++ continue;
++
++ if (!rt_task(p) && !iso_task(p))
++ continue;
++
++ rq = task_rq_lock(p, &flags);
++ __setscheduler(p, rq, SCHED_NORMAL, 0, false);
++ task_rq_unlock(rq, p, &flags);
++ }
++ read_unlock(&tasklist_lock);
++}
++
++void normalize_rt_tasks(void)
++{
++ normalise_rt_tasks();
++}
++#endif /* CONFIG_MAGIC_SYSRQ */
++
++#if defined(CONFIG_IA64) || defined(CONFIG_KGDB_KDB)
++/*
++ * These functions are only useful for the IA64 MCA handling, or kdb.
++ *
++ * They can only be called when the whole system has been
++ * stopped - every CPU needs to be quiescent, and no scheduling
++ * activity can take place. Using them for anything else would
++ * be a serious bug, and as a result, they aren't even visible
++ * under any other configuration.
++ */
++
++/**
++ * curr_task - return the current task for a given CPU.
++ * @cpu: the processor in question.
++ *
++ * ONLY VALID WHEN THE WHOLE SYSTEM IS STOPPED!
++ *
++ * Return: The current task for @cpu.
++ */
++struct task_struct *curr_task(int cpu)
++{
++ return cpu_curr(cpu);
++}
++
++#endif /* defined(CONFIG_IA64) || defined(CONFIG_KGDB_KDB) */
++
++#ifdef CONFIG_IA64
++/**
++ * set_curr_task - set the current task for a given CPU.
++ * @cpu: the processor in question.
++ * @p: the task pointer to set.
++ *
++ * Description: This function must only be used when non-maskable interrupts
++ * are serviced on a separate stack. It allows the architecture to switch the
++ * notion of the current task on a CPU in a non-blocking manner. This function
++ * must be called with all CPU's synchronised, and interrupts disabled, the
++ * and caller must save the original value of the current task (see
++ * curr_task() above) and restore that value before reenabling interrupts and
++ * re-starting the system.
++ *
++ * ONLY VALID WHEN THE WHOLE SYSTEM IS STOPPED!
++ */
++void ia64_set_curr_task(int cpu, struct task_struct *p)
++{
++ cpu_curr(cpu) = p;
++}
++
++#endif
++
++void init_idle_bootup_task(struct task_struct *idle)
++{}
++
++#ifdef CONFIG_SCHED_DEBUG
++__read_mostly bool sched_debug_enabled;
++
++void proc_sched_show_task(struct task_struct *p, struct pid_namespace *ns,
++ struct seq_file *m)
++{}
++
++void proc_sched_set_task(struct task_struct *p)
++{}
++#endif
++
++#ifdef CONFIG_SMP
++#define SCHED_LOAD_SHIFT (10)
++#define SCHED_LOAD_SCALE (1L << SCHED_LOAD_SHIFT)
++
++unsigned long default_scale_freq_power(struct sched_domain *sd, int cpu)
++{
++ return SCHED_LOAD_SCALE;
++}
++
++unsigned long default_scale_smt_power(struct sched_domain *sd, int cpu)
++{
++ unsigned long weight = cpumask_weight(sched_domain_span(sd));
++ unsigned long smt_gain = sd->smt_gain;
++
++ smt_gain /= weight;
++
++ return smt_gain;
++}
++#endif
++
++#ifdef CONFIG_CGROUP_SCHED
++static void sched_free_group(struct task_group *tg)
++{
++ kmem_cache_free(task_group_cache, tg);
++}
++
++/* allocate runqueue etc for a new task group */
++struct task_group *sched_create_group(struct task_group *parent)
++{
++ struct task_group *tg;
++
++ tg = kmem_cache_alloc(task_group_cache, GFP_KERNEL | __GFP_ZERO);
++ if (!tg)
++ return ERR_PTR(-ENOMEM);
++
++ return tg;
++}
++
++void sched_online_group(struct task_group *tg, struct task_group *parent)
++{
++}
++
++/* rcu callback to free various structures associated with a task group */
++static void sched_free_group_rcu(struct rcu_head *rhp)
++{
++ /* Now it should be safe to free those cfs_rqs */
++ sched_free_group(container_of(rhp, struct task_group, rcu));
++}
++
++void sched_destroy_group(struct task_group *tg)
++{
++ /* Wait for possible concurrent references to cfs_rqs complete */
++ call_rcu(&tg->rcu, sched_free_group_rcu);
++}
++
++void sched_offline_group(struct task_group *tg)
++{
++}
++
++static inline struct task_group *css_tg(struct cgroup_subsys_state *css)
++{
++ return css ? container_of(css, struct task_group, css) : NULL;
++}
++
++static struct cgroup_subsys_state *
++cpu_cgroup_css_alloc(struct cgroup_subsys_state *parent_css)
++{
++ struct task_group *parent = css_tg(parent_css);
++ struct task_group *tg;
++
++ if (!parent) {
++ /* This is early initialization for the top cgroup */
++ return &root_task_group.css;
++ }
++
++ tg = sched_create_group(parent);
++ if (IS_ERR(tg))
++ return ERR_PTR(-ENOMEM);
++ return &tg->css;
++}
++
++/* Expose task group only after completing cgroup initialization */
++static int cpu_cgroup_css_online(struct cgroup_subsys_state *css)
++{
++ struct task_group *tg = css_tg(css);
++ struct task_group *parent = css_tg(css->parent);
++
++ if (parent)
++ sched_online_group(tg, parent);
++ return 0;
++}
++
++static void cpu_cgroup_css_released(struct cgroup_subsys_state *css)
++{
++ struct task_group *tg = css_tg(css);
++
++ sched_offline_group(tg);
++}
++
++static void cpu_cgroup_css_free(struct cgroup_subsys_state *css)
++{
++ struct task_group *tg = css_tg(css);
++
++ /*
++ * Relies on the RCU grace period between css_released() and this.
++ */
++ sched_free_group(tg);
++}
++
++static void cpu_cgroup_fork(struct task_struct *task)
++{
++}
++
++static int cpu_cgroup_can_attach(struct cgroup_taskset *tset)
++{
++ return 0;
++}
++
++static void cpu_cgroup_attach(struct cgroup_taskset *tset)
++{
++}
++
++static struct cftype cpu_legacy_files[] = {
++ { } /* Terminate */
++};
++
++static struct cftype cpu_files[] = {
++ { } /* terminate */
++};
++
++static int cpu_extra_stat_show(struct seq_file *sf,
++ struct cgroup_subsys_state *css)
++{
++ return 0;
++}
++
++struct cgroup_subsys cpu_cgrp_subsys = {
++ .css_alloc = cpu_cgroup_css_alloc,
++ .css_online = cpu_cgroup_css_online,
++ .css_released = cpu_cgroup_css_released,
++ .css_free = cpu_cgroup_css_free,
++ .css_extra_stat_show = cpu_extra_stat_show,
++ .fork = cpu_cgroup_fork,
++ .can_attach = cpu_cgroup_can_attach,
++ .attach = cpu_cgroup_attach,
++ .legacy_cftypes = cpu_files,
++ .legacy_cftypes = cpu_legacy_files,
++ .dfl_cftypes = cpu_files,
++ .early_init = true,
++ .threaded = true,
++};
++#endif /* CONFIG_CGROUP_SCHED */
++
++#undef CREATE_TRACE_POINTS
+diff -Nur a/kernel/sched/MuQSS.h b/kernel/sched/MuQSS.h
+--- a/kernel/sched/MuQSS.h 1970-01-01 01:00:00.000000000 +0100
++++ b/kernel/sched/MuQSS.h 2019-02-09 17:46:12.001297867 +0000
+@@ -0,0 +1,881 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++#ifndef MUQSS_SCHED_H
++#define MUQSS_SCHED_H
++
++#include <linux/sched/clock.h>
++#include <linux/sched/wake_q.h>
++#include <linux/sched/signal.h>
++#include <linux/sched/mm.h>
++#include <linux/sched/cpufreq.h>
++#include <linux/sched/stat.h>
++#include <linux/sched/nohz.h>
++#include <linux/sched/debug.h>
++#include <linux/sched/hotplug.h>
++#include <linux/sched/task.h>
++#include <linux/sched/task_stack.h>
++#include <linux/sched/topology.h>
++#include <linux/sched/cputime.h>
++#include <linux/sched/init.h>
++#include <linux/sched/isolation.h>
++
++#include <uapi/linux/sched/types.h>
++
++#include <linux/cgroup.h>
++#include <linux/cpufreq.h>
++#include <linux/cpuidle.h>
++#include <linux/ctype.h>
++#include <linux/freezer.h>
++#include <linux/interrupt.h>
++#include <linux/kernel_stat.h>
++#include <linux/kthread.h>
++#include <linux/livepatch.h>
++#include <linux/proc_fs.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/skip_list.h>
++#include <linux/stackprotector.h>
++#include <linux/stop_machine.h>
++#include <linux/suspend.h>
++#include <linux/swait.h>
++#include <linux/tick.h>
++#include <linux/tsacct_kern.h>
++#include <linux/u64_stats_sync.h>
++
++#ifdef CONFIG_PARAVIRT
++#include <asm/paravirt.h>
++#endif
++
++#include "cpupri.h"
++
++#ifdef CONFIG_SCHED_DEBUG
++# define SCHED_WARN_ON(x) WARN_ONCE(x, #x)
++#else
++# define SCHED_WARN_ON(x) ((void)(x))
++#endif
++
++/* task_struct::on_rq states: */
++#define TASK_ON_RQ_QUEUED 1
++#define TASK_ON_RQ_MIGRATING 2
++
++struct rq;
++
++#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
++#define HAVE_SCHED_AVG_IRQ
++#endif
++
++#ifdef CONFIG_SMP
++
++static inline bool sched_asym_prefer(int a, int b)
++{
++ return arch_asym_cpu_priority(a) > arch_asym_cpu_priority(b);
++}
++
++/*
++ * We add the notion of a root-domain which will be used to define per-domain
++ * variables. Each exclusive cpuset essentially defines an island domain by
++ * fully partitioning the member cpus from any other cpuset. Whenever a new
++ * exclusive cpuset is created, we also create and attach a new root-domain
++ * object.
++ *
++ */
++struct root_domain {
++ atomic_t refcount;
++ atomic_t rto_count;
++ struct rcu_head rcu;
++ cpumask_var_t span;
++ cpumask_var_t online;
++
++ /* Indicate more than one runnable task for any CPU */
++ bool overload;
++
++ /*
++ * The bit corresponding to a CPU gets set here if such CPU has more
++ * than one runnable -deadline task (as it is below for RT tasks).
++ */
++ cpumask_var_t dlo_mask;
++ atomic_t dlo_count;
++ /* Replace unused CFS structures with void */
++ //struct dl_bw dl_bw;
++ //struct cpudl cpudl;
++ void *dl_bw;
++ void *cpudl;
++
++ /*
++ * The "RT overload" flag: it gets set if a CPU has more than
++ * one runnable RT task.
++ */
++ cpumask_var_t rto_mask;
++ //struct cpupri cpupri;
++ void *cpupri;
++
++ unsigned long max_cpu_capacity;
++};
++
++extern struct root_domain def_root_domain;
++extern struct mutex sched_domains_mutex;
++
++extern void init_defrootdomain(void);
++extern int sched_init_domains(const struct cpumask *cpu_map);
++extern void rq_attach_root(struct rq *rq, struct root_domain *rd);
++
++static inline void cpupri_cleanup(void __maybe_unused *cpupri)
++{
++}
++
++static inline void cpudl_cleanup(void __maybe_unused *cpudl)
++{
++}
++
++static inline void init_dl_bw(void __maybe_unused *dl_bw)
++{
++}
++
++static inline int cpudl_init(void __maybe_unused *dl_bw)
++{
++ return 0;
++}
++
++static inline int cpupri_init(void __maybe_unused *cpupri)
++{
++ return 0;
++}
++#endif /* CONFIG_SMP */
++
++/*
++ * This is the main, per-CPU runqueue data structure.
++ * This data should only be modified by the local cpu.
++ */
++struct rq {
++ raw_spinlock_t *lock;
++ raw_spinlock_t *orig_lock;
++
++ struct task_struct *curr, *idle, *stop;
++ struct mm_struct *prev_mm;
++
++ unsigned int nr_running;
++ /*
++ * This is part of a global counter where only the total sum
++ * over all CPUs matters. A task can increase this counter on
++ * one CPU and if it got migrated afterwards it may decrease
++ * it on another CPU. Always updated under the runqueue lock:
++ */
++ unsigned long nr_uninterruptible;
++ u64 nr_switches;
++
++ /* Stored data about rq->curr to work outside rq lock */
++ u64 rq_deadline;
++ int rq_prio;
++
++ /* Best queued id for use outside lock */
++ u64 best_key;
++
++ unsigned long last_scheduler_tick; /* Last jiffy this RQ ticked */
++ unsigned long last_jiffy; /* Last jiffy this RQ updated rq clock */
++ u64 niffies; /* Last time this RQ updated rq clock */
++ u64 last_niffy; /* Last niffies as updated by local clock */
++ u64 last_jiffy_niffies; /* Niffies @ last_jiffy */
++
++ u64 load_update; /* When we last updated load */
++ unsigned long load_avg; /* Rolling load average */
++#ifdef HAVE_SCHED_AVG_IRQ
++ u64 irq_load_update; /* When we last updated IRQ load */
++ unsigned long irq_load_avg; /* Rolling IRQ load average */
++#endif
++#ifdef CONFIG_SMT_NICE
++ struct mm_struct *rq_mm;
++ int rq_smt_bias; /* Policy/nice level bias across smt siblings */
++#endif
++ /* Accurate timekeeping data */
++ unsigned long user_ns, nice_ns, irq_ns, softirq_ns, system_ns,
++ iowait_ns, idle_ns;
++ atomic_t nr_iowait;
++
++ skiplist_node *node;
++ skiplist *sl;
++#ifdef CONFIG_SMP
++ struct task_struct *preempt; /* Preempt triggered on this task */
++ struct task_struct *preempting; /* Hint only, what task is preempting */
++
++ int cpu; /* cpu of this runqueue */
++ bool online;
++
++ struct root_domain *rd;
++ struct sched_domain *sd;
++
++ unsigned long cpu_capacity_orig;
++
++ int *cpu_locality; /* CPU relative cache distance */
++ struct rq **rq_order; /* Shared RQs ordered by relative cache distance */
++ struct rq **cpu_order; /* RQs of discrete CPUs ordered by distance */
++
++ struct rq *smp_leader; /* First physical CPU per node */
++#ifdef CONFIG_SCHED_SMT
++ struct rq *smt_leader; /* First logical CPU in SMT siblings */
++ cpumask_t thread_mask;
++ bool (*siblings_idle)(struct rq *rq);
++ /* See if all smt siblings are idle */
++#endif /* CONFIG_SCHED_SMT */
++#ifdef CONFIG_SCHED_MC
++ struct rq *mc_leader; /* First logical CPU in MC siblings */
++ cpumask_t core_mask;
++ bool (*cache_idle)(struct rq *rq);
++ /* See if all cache siblings are idle */
++#endif /* CONFIG_SCHED_MC */
++#endif /* CONFIG_SMP */
++#ifdef CONFIG_IRQ_TIME_ACCOUNTING
++ u64 prev_irq_time;
++#endif /* CONFIG_IRQ_TIME_ACCOUNTING */
++#ifdef CONFIG_PARAVIRT
++ u64 prev_steal_time;
++#endif /* CONFIG_PARAVIRT */
++#ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING
++ u64 prev_steal_time_rq;
++#endif /* CONFIG_PARAVIRT_TIME_ACCOUNTING */
++
++ u64 clock, old_clock, last_tick;
++ u64 clock_task;
++ int dither;
++
++ int iso_ticks;
++ bool iso_refractory;
++
++#ifdef CONFIG_HIGH_RES_TIMERS
++ struct hrtimer hrexpiry_timer;
++#endif
++
++ int rt_nr_running; /* Number real time tasks running */
++#ifdef CONFIG_SCHEDSTATS
++
++ /* latency stats */
++ struct sched_info rq_sched_info;
++ unsigned long long rq_cpu_time;
++ /* could above be rq->cfs_rq.exec_clock + rq->rt_rq.rt_runtime ? */
++
++ /* sys_sched_yield() stats */
++ unsigned int yld_count;
++
++ /* schedule() stats */
++ unsigned int sched_switch;
++ unsigned int sched_count;
++ unsigned int sched_goidle;
++
++ /* try_to_wake_up() stats */
++ unsigned int ttwu_count;
++ unsigned int ttwu_local;
++#endif /* CONFIG_SCHEDSTATS */
++
++#ifdef CONFIG_SMP
++ struct llist_head wake_list;
++#endif
++
++#ifdef CONFIG_CPU_IDLE
++ /* Must be inspected within a rcu lock section */
++ struct cpuidle_state *idle_state;
++#endif
++};
++
++#ifdef CONFIG_SMP
++struct rq *cpu_rq(int cpu);
++#endif
++
++#ifndef CONFIG_SMP
++extern struct rq *uprq;
++#define cpu_rq(cpu) (uprq)
++#define this_rq() (uprq)
++#define raw_rq() (uprq)
++#define task_rq(p) (uprq)
++#define cpu_curr(cpu) ((uprq)->curr)
++#else /* CONFIG_SMP */
++DECLARE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
++#define this_rq() this_cpu_ptr(&runqueues)
++#define raw_rq() raw_cpu_ptr(&runqueues)
++#define task_rq(p) cpu_rq(task_cpu(p))
++#endif /* CONFIG_SMP */
++
++static inline int task_current(struct rq *rq, struct task_struct *p)
++{
++ return rq->curr == p;
++}
++
++static inline int task_running(struct rq *rq, struct task_struct *p)
++{
++#ifdef CONFIG_SMP
++ return p->on_cpu;
++#else
++ return task_current(rq, p);
++#endif
++}
++
++static inline void rq_lock(struct rq *rq)
++ __acquires(rq->lock)
++{
++ raw_spin_lock(rq->lock);
++}
++
++static inline void rq_unlock(struct rq *rq)
++ __releases(rq->lock)
++{
++ raw_spin_unlock(rq->lock);
++}
++
++static inline void rq_lock_irq(struct rq *rq)
++ __acquires(rq->lock)
++{
++ raw_spin_lock_irq(rq->lock);
++}
++
++static inline void rq_unlock_irq(struct rq *rq)
++ __releases(rq->lock)
++{
++ raw_spin_unlock_irq(rq->lock);
++}
++
++static inline void rq_lock_irqsave(struct rq *rq, unsigned long *flags)
++ __acquires(rq->lock)
++{
++ raw_spin_lock_irqsave(rq->lock, *flags);
++}
++
++static inline void rq_unlock_irqrestore(struct rq *rq, unsigned long *flags)
++ __releases(rq->lock)
++{
++ raw_spin_unlock_irqrestore(rq->lock, *flags);
++}
++
++static inline struct rq *task_rq_lock(struct task_struct *p, unsigned long *flags)
++ __acquires(p->pi_lock)
++ __acquires(rq->lock)
++{
++ struct rq *rq;
++
++ while (42) {
++ raw_spin_lock_irqsave(&p->pi_lock, *flags);
++ rq = task_rq(p);
++ raw_spin_lock(rq->lock);
++ if (likely(rq == task_rq(p)))
++ break;
++ raw_spin_unlock(rq->lock);
++ raw_spin_unlock_irqrestore(&p->pi_lock, *flags);
++ }
++ return rq;
++}
++
++static inline void task_rq_unlock(struct rq *rq, struct task_struct *p, unsigned long *flags)
++ __releases(rq->lock)
++ __releases(p->pi_lock)
++{
++ rq_unlock(rq);
++ raw_spin_unlock_irqrestore(&p->pi_lock, *flags);
++}
++
++static inline struct rq *__task_rq_lock(struct task_struct *p)
++ __acquires(rq->lock)
++{
++ struct rq *rq;
++
++ lockdep_assert_held(&p->pi_lock);
++
++ while (42) {
++ rq = task_rq(p);
++ raw_spin_lock(rq->lock);
++ if (likely(rq == task_rq(p)))
++ break;
++ raw_spin_unlock(rq->lock);
++ }
++ return rq;
++}
++
++static inline void __task_rq_unlock(struct rq *rq)
++{
++ rq_unlock(rq);
++}
++
++/*
++ * {de,en}queue flags: Most not used on MuQSS.
++ *
++ * DEQUEUE_SLEEP - task is no longer runnable
++ * ENQUEUE_WAKEUP - task just became runnable
++ *
++ * SAVE/RESTORE - an otherwise spurious dequeue/enqueue, done to ensure tasks
++ * are in a known state which allows modification. Such pairs
++ * should preserve as much state as possible.
++ *
++ * MOVE - paired with SAVE/RESTORE, explicitly does not preserve the location
++ * in the runqueue.
++ *
++ * ENQUEUE_HEAD - place at front of runqueue (tail if not specified)
++ * ENQUEUE_REPLENISH - CBS (replenish runtime and postpone deadline)
++ * ENQUEUE_MIGRATED - the task was migrated during wakeup
++ *
++ */
++
++#define DEQUEUE_SAVE 0x02 /* matches ENQUEUE_RESTORE */
++
++#define ENQUEUE_RESTORE 0x02
++
++static inline u64 __rq_clock_broken(struct rq *rq)
++{
++ return READ_ONCE(rq->clock);
++}
++
++static inline u64 rq_clock(struct rq *rq)
++{
++ lockdep_assert_held(rq->lock);
++
++ return rq->clock;
++}
++
++static inline u64 rq_clock_task(struct rq *rq)
++{
++ lockdep_assert_held(rq->lock);
++
++ return rq->clock_task;
++}
++
++#ifdef CONFIG_NUMA
++enum numa_topology_type {
++ NUMA_DIRECT,
++ NUMA_GLUELESS_MESH,
++ NUMA_BACKPLANE,
++};
++extern enum numa_topology_type sched_numa_topology_type;
++extern int sched_max_numa_distance;
++extern bool find_numa_distance(int distance);
++
++extern void sched_init_numa(void);
++extern void sched_domains_numa_masks_set(unsigned int cpu);
++extern void sched_domains_numa_masks_clear(unsigned int cpu);
++#else
++static inline void sched_init_numa(void) { }
++static inline void sched_domains_numa_masks_set(unsigned int cpu) { }
++static inline void sched_domains_numa_masks_clear(unsigned int cpu) { }
++#endif
++
++extern struct mutex sched_domains_mutex;
++extern struct static_key_false sched_schedstats;
++
++#define rcu_dereference_check_sched_domain(p) \
++ rcu_dereference_check((p), \
++ lockdep_is_held(&sched_domains_mutex))
++
++#ifdef CONFIG_SMP
++
++/*
++ * The domain tree (rq->sd) is protected by RCU's quiescent state transition.
++ * See detach_destroy_domains: synchronize_sched for details.
++ *
++ * The domain tree of any CPU may only be accessed from within
++ * preempt-disabled sections.
++ */
++#define for_each_domain(cpu, __sd) \
++ for (__sd = rcu_dereference_check_sched_domain(cpu_rq(cpu)->sd); \
++ __sd; __sd = __sd->parent)
++
++#define for_each_lower_domain(sd) for (; sd; sd = sd->child)
++
++/**
++ * highest_flag_domain - Return highest sched_domain containing flag.
++ * @cpu: The cpu whose highest level of sched domain is to
++ * be returned.
++ * @flag: The flag to check for the highest sched_domain
++ * for the given cpu.
++ *
++ * Returns the highest sched_domain of a cpu which contains the given flag.
++ */
++static inline struct sched_domain *highest_flag_domain(int cpu, int flag)
++{
++ struct sched_domain *sd, *hsd = NULL;
++
++ for_each_domain(cpu, sd) {
++ if (!(sd->flags & flag))
++ break;
++ hsd = sd;
++ }
++
++ return hsd;
++}
++
++static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
++{
++ struct sched_domain *sd;
++
++ for_each_domain(cpu, sd) {
++ if (sd->flags & flag)
++ break;
++ }
++
++ return sd;
++}
++
++DECLARE_PER_CPU(struct sched_domain *, sd_llc);
++DECLARE_PER_CPU(int, sd_llc_size);
++DECLARE_PER_CPU(int, sd_llc_id);
++DECLARE_PER_CPU(struct sched_domain_shared *, sd_llc_shared);
++DECLARE_PER_CPU(struct sched_domain *, sd_numa);
++DECLARE_PER_CPU(struct sched_domain *, sd_asym);
++
++struct sched_group_capacity {
++ atomic_t ref;
++ /*
++ * CPU capacity of this group, SCHED_CAPACITY_SCALE being max capacity
++ * for a single CPU.
++ */
++ unsigned long capacity;
++ unsigned long min_capacity; /* Min per-CPU capacity in group */
++ unsigned long next_update;
++ int imbalance; /* XXX unrelated to capacity but shared group state */
++
++#ifdef CONFIG_SCHED_DEBUG
++ int id;
++#endif
++
++ unsigned long cpumask[0]; /* balance mask */
++};
++
++struct sched_group {
++ struct sched_group *next; /* Must be a circular list */
++ atomic_t ref;
++
++ unsigned int group_weight;
++ struct sched_group_capacity *sgc;
++ int asym_prefer_cpu; /* cpu of highest priority in group */
++
++ /*
++ * The CPUs this group covers.
++ *
++ * NOTE: this field is variable length. (Allocated dynamically
++ * by attaching extra space to the end of the structure,
++ * depending on how many CPUs the kernel has booted up with)
++ */
++ unsigned long cpumask[0];
++};
++
++static inline struct cpumask *sched_group_span(struct sched_group *sg)
++{
++ return to_cpumask(sg->cpumask);
++}
++
++/*
++ * See build_balance_mask().
++ */
++static inline struct cpumask *group_balance_mask(struct sched_group *sg)
++{
++ return to_cpumask(sg->sgc->cpumask);
++}
++
++/**
++ * group_first_cpu - Returns the first cpu in the cpumask of a sched_group.
++ * @group: The group whose first cpu is to be returned.
++ */
++static inline unsigned int group_first_cpu(struct sched_group *group)
++{
++ return cpumask_first(sched_group_span(group));
++}
++
++
++#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SYSCTL)
++void register_sched_domain_sysctl(void);
++void dirty_sched_domain_sysctl(int cpu);
++void unregister_sched_domain_sysctl(void);
++#else
++static inline void register_sched_domain_sysctl(void)
++{
++}
++static inline void dirty_sched_domain_sysctl(int cpu)
++{
++}
++static inline void unregister_sched_domain_sysctl(void)
++{
++}
++#endif
++
++extern void sched_ttwu_pending(void);
++extern void set_cpus_allowed_common(struct task_struct *p, const struct cpumask *new_mask);
++extern void set_rq_online (struct rq *rq);
++extern void set_rq_offline(struct rq *rq);
++extern bool sched_smp_initialized;
++
++static inline void update_group_capacity(struct sched_domain *sd, int cpu)
++{
++}
++
++static inline void trigger_load_balance(struct rq *rq)
++{
++}
++
++#define sched_feat(x) 0
++
++#else /* CONFIG_SMP */
++
++static inline void sched_ttwu_pending(void) { }
++
++#endif /* CONFIG_SMP */
++
++#ifdef CONFIG_CPU_IDLE
++static inline void idle_set_state(struct rq *rq,
++ struct cpuidle_state *idle_state)
++{
++ rq->idle_state = idle_state;
++}
++
++static inline struct cpuidle_state *idle_get_state(struct rq *rq)
++{
++ SCHED_WARN_ON(!rcu_read_lock_held());
++ return rq->idle_state;
++}
++#else
++static inline void idle_set_state(struct rq *rq,
++ struct cpuidle_state *idle_state)
++{
++}
++
++static inline struct cpuidle_state *idle_get_state(struct rq *rq)
++{
++ return NULL;
++}
++#endif
++
++#ifdef CONFIG_SCHED_DEBUG
++extern bool sched_debug_enabled;
++#endif
++
++extern void schedule_idle(void);
++
++#ifdef CONFIG_IRQ_TIME_ACCOUNTING
++struct irqtime {
++ u64 total;
++ u64 tick_delta;
++ u64 irq_start_time;
++ struct u64_stats_sync sync;
++};
++
++DECLARE_PER_CPU(struct irqtime, cpu_irqtime);
++
++/*
++ * Returns the irqtime minus the softirq time computed by ksoftirqd.
++ * Otherwise ksoftirqd's sum_exec_runtime is substracted its own runtime
++ * and never move forward.
++ */
++static inline u64 irq_time_read(int cpu)
++{
++ struct irqtime *irqtime = &per_cpu(cpu_irqtime, cpu);
++ unsigned int seq;
++ u64 total;
++
++ do {
++ seq = __u64_stats_fetch_begin(&irqtime->sync);
++ total = irqtime->total;
++ } while (__u64_stats_fetch_retry(&irqtime->sync, seq));
++
++ return total;
++}
++#endif /* CONFIG_IRQ_TIME_ACCOUNTING */
++
++#ifdef CONFIG_SMP
++static inline int cpu_of(struct rq *rq)
++{
++ return rq->cpu;
++}
++#else /* CONFIG_SMP */
++static inline int cpu_of(struct rq *rq)
++{
++ return 0;
++}
++#endif
++
++#ifdef CONFIG_CPU_FREQ
++DECLARE_PER_CPU(struct update_util_data *, cpufreq_update_util_data);
++
++static inline void cpufreq_trigger(struct rq *rq, unsigned int flags)
++{
++ struct update_util_data *data;
++
++ data = rcu_dereference_sched(*per_cpu_ptr(&cpufreq_update_util_data,
++ cpu_of(rq)));
++
++ if (data)
++ data->func(data, rq->niffies, flags);
++}
++#else
++static inline void cpufreq_trigger(struct rq *rq, unsigned int flag)
++{
++}
++#endif /* CONFIG_CPU_FREQ */
++
++#ifdef arch_scale_freq_capacity
++#ifndef arch_scale_freq_invariant
++#define arch_scale_freq_invariant() (true)
++#endif
++#else /* arch_scale_freq_capacity */
++#define arch_scale_freq_invariant() (false)
++#endif
++
++/*
++ * This should only be called when current == rq->idle. Dodgy workaround for
++ * when softirqs are pending and we are in the idle loop. Setting current to
++ * resched will kick us out of the idle loop and the softirqs will be serviced
++ * on our next pass through schedule().
++ */
++static inline bool softirq_pending(int cpu)
++{
++ if (likely(!local_softirq_pending()))
++ return false;
++ set_tsk_need_resched(current);
++ return true;
++}
++
++#ifdef CONFIG_64BIT
++static inline u64 read_sum_exec_runtime(struct task_struct *t)
++{
++ return tsk_seruntime(t);
++}
++#else
++struct rq *task_rq_lock(struct task_struct *p, unsigned long *flags);
++void task_rq_unlock(struct rq *rq, struct task_struct *p, unsigned long *flags);
++
++static inline u64 read_sum_exec_runtime(struct task_struct *t)
++{
++ unsigned long flags;
++ u64 ns;
++ struct rq *rq;
++
++ rq = task_rq_lock(t, &flags);
++ ns = tsk_seruntime(t);
++ task_rq_unlock(rq, t, &flags);
++
++ return ns;
++}
++#endif
++
++#ifndef arch_scale_freq_capacity
++static __always_inline
++unsigned long arch_scale_freq_capacity(int cpu)
++{
++ return SCHED_CAPACITY_SCALE;
++}
++#endif
++
++#ifdef CONFIG_NO_HZ_FULL
++extern bool sched_can_stop_tick(struct rq *rq);
++extern int __init sched_tick_offload_init(void);
++
++/*
++ * Tick may be needed by tasks in the runqueue depending on their policy and
++ * requirements. If tick is needed, lets send the target an IPI to kick it out of
++ * nohz mode if necessary.
++ */
++static inline void sched_update_tick_dependency(struct rq *rq)
++{
++ int cpu;
++
++ if (!tick_nohz_full_enabled())
++ return;
++
++ cpu = cpu_of(rq);
++
++ if (!tick_nohz_full_cpu(cpu))
++ return;
++
++ if (sched_can_stop_tick(rq))
++ tick_nohz_dep_clear_cpu(cpu, TICK_DEP_BIT_SCHED);
++ else
++ tick_nohz_dep_set_cpu(cpu, TICK_DEP_BIT_SCHED);
++}
++#else
++static inline int sched_tick_offload_init(void) { return 0; }
++static inline void sched_update_tick_dependency(struct rq *rq) { }
++#endif
++
++#ifdef CONFIG_SMP
++
++#ifndef arch_scale_cpu_capacity
++static __always_inline
++unsigned long arch_scale_cpu_capacity(struct sched_domain *sd, int cpu)
++{
++ if (sd && (sd->flags & SD_SHARE_CPUCAPACITY) && (sd->span_weight > 1))
++ return sd->smt_gain / sd->span_weight;
++
++ return SCHED_CAPACITY_SCALE;
++}
++#endif
++#else
++#ifndef arch_scale_cpu_capacity
++static __always_inline
++unsigned long arch_scale_cpu_capacity(void __always_unused *sd, int cpu)
++{
++ return SCHED_CAPACITY_SCALE;
++}
++#endif
++#endif
++
++#define SCHED_FLAG_SUGOV 0x10000000
++
++static inline bool rt_rq_is_runnable(struct rq *rt_rq)
++{
++ return rt_rq->rt_nr_running;
++}
++
++#ifdef CONFIG_CPU_FREQ_GOV_SCHEDUTIL
++
++static inline unsigned long cpu_bw_dl(struct rq *rq)
++{
++ return 0;
++}
++
++static inline unsigned long cpu_util_dl(struct rq *rq)
++{
++ return 0;
++}
++
++static inline unsigned long cpu_util_cfs(struct rq *rq)
++{
++ unsigned long ret = READ_ONCE(rq->load_avg);
++
++ if (ret > SCHED_CAPACITY_SCALE)
++ ret = SCHED_CAPACITY_SCALE;
++ return ret;
++}
++
++static inline unsigned long cpu_util_rt(struct rq *rq)
++{
++ unsigned long ret = READ_ONCE(rq->rt_nr_running);
++
++ if (ret > SCHED_CAPACITY_SCALE)
++ ret = SCHED_CAPACITY_SCALE;
++ return ret;
++}
++
++#ifdef HAVE_SCHED_AVG_IRQ
++static inline unsigned long cpu_util_irq(struct rq *rq)
++{
++ unsigned long ret = READ_ONCE(rq->irq_load_avg);
++
++ if (ret > SCHED_CAPACITY_SCALE)
++ ret = SCHED_CAPACITY_SCALE;
++ return ret;
++}
++
++static inline
++unsigned long scale_irq_capacity(unsigned long util, unsigned long irq, unsigned long max)
++{
++ util *= (max - irq);
++ util /= max;
++
++ return util;
++
++}
++#else
++static inline unsigned long cpu_util_irq(struct rq *rq)
++{
++ return 0;
++}
++
++static inline
++unsigned long scale_irq_capacity(unsigned long util, unsigned long irq, unsigned long max)
++{
++ return util;
++}
++#endif
++#endif
++
++#endif /* MUQSS_SCHED_H */
+diff -Nur a/kernel/sched/sched.h b/kernel/sched/sched.h
+--- a/kernel/sched/sched.h 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/sched/sched.h 2019-02-09 17:46:12.001297867 +0000
+@@ -2,6 +2,19 @@
+ /*
+ * Scheduler internal types and methods:
+ */
++#ifdef CONFIG_SCHED_MUQSS
++#include "MuQSS.h"
++
++/* Begin compatibility wrappers for MuQSS/CFS differences */
++#define rq_rt_nr_running(rq) ((rq)->rt_nr_running)
++#define rq_h_nr_running(rq) ((rq)->nr_running)
++
++#else /* CONFIG_SCHED_MUQSS */
++
++#define rq_rt_nr_running(rq) ((rq)->rt.rt_nr_running)
++#define rq_h_nr_running(rq) ((rq)->cfs.h_nr_running)
++
++
+ #include <linux/sched.h>
+
+ #include <linux/sched/autogroup.h>
+@@ -2241,3 +2254,30 @@
+ return util;
+ }
+ #endif
++
++/* MuQSS compatibility functions */
++static inline bool softirq_pending(int cpu)
++{
++ return false;
++}
++
++#ifdef CONFIG_64BIT
++static inline u64 read_sum_exec_runtime(struct task_struct *t)
++{
++ return t->se.sum_exec_runtime;
++}
++#else
++static inline u64 read_sum_exec_runtime(struct task_struct *t)
++{
++ u64 ns;
++ struct rq_flags rf;
++ struct rq *rq;
++
++ rq = task_rq_lock(t, &rf);
++ ns = t->se.sum_exec_runtime;
++ task_rq_unlock(rq, t, &rf);
++
++ return ns;
++}
++#endif
++#endif /* CONFIG_SCHED_MUQSS */
+diff -Nur a/kernel/sched/topology.c b/kernel/sched/topology.c
+--- a/kernel/sched/topology.c 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/sched/topology.c 2019-02-09 17:46:12.001297867 +0000
+@@ -219,7 +219,11 @@
+ struct root_domain *old_rd = NULL;
+ unsigned long flags;
+
++#ifdef CONFIG_SCHED_MUQSS
++ raw_spin_lock_irqsave(rq->lock, flags);
++#else
+ raw_spin_lock_irqsave(&rq->lock, flags);
++#endif
+
+ if (rq->rd) {
+ old_rd = rq->rd;
+@@ -245,7 +249,11 @@
+ if (cpumask_test_cpu(rq->cpu, cpu_active_mask))
+ set_rq_online(rq);
+
++#ifdef CONFIG_SCHED_MUQSS
++ raw_spin_unlock_irqrestore(rq->lock, flags);
++#else
+ raw_spin_unlock_irqrestore(&rq->lock, flags);
++#endif
+
+ if (old_rd)
+ call_rcu_sched(&old_rd->rcu, free_rootdomain);
+diff -Nur a/kernel/skip_list.c b/kernel/skip_list.c
+--- a/kernel/skip_list.c 1970-01-01 01:00:00.000000000 +0100
++++ b/kernel/skip_list.c 2019-02-09 17:46:12.001297867 +0000
+@@ -0,0 +1,148 @@
++/*
++ Copyright (C) 2011,2016 Con Kolivas.
++
++ Code based on example originally by William Pugh.
++
++Skip Lists are a probabilistic alternative to balanced trees, as
++described in the June 1990 issue of CACM and were invented by
++William Pugh in 1987.
++
++A couple of comments about this implementation:
++The routine randomLevel has been hard-coded to generate random
++levels using p=0.25. It can be easily changed.
++
++The insertion routine has been implemented so as to use the
++dirty hack described in the CACM paper: if a random level is
++generated that is more than the current maximum level, the
++current maximum level plus one is used instead.
++
++Levels start at zero and go up to MaxLevel (which is equal to
++MaxNumberOfLevels-1).
++
++The routines defined in this file are:
++
++init: defines slnode
++
++new_skiplist: returns a new, empty list
++
++randomLevel: Returns a random level based on a u64 random seed passed to it.
++In MuQSS, the "niffy" time is used for this purpose.
++
++insert(l,key, value): inserts the binding (key, value) into l. This operation
++occurs in O(log n) time.
++
++delnode(slnode, l, node): deletes any binding of key from the l based on the
++actual node value. This operation occurs in O(k) time where k is the
++number of levels of the node in question (max 8). The original delete
++function occurred in O(log n) time and involved a search.
++
++MuQSS Notes: In this implementation of skiplists, there are bidirectional
++next/prev pointers and the insert function returns a pointer to the actual
++node the value is stored. The key here is chosen by the scheduler so as to
++sort tasks according to the priority list requirements and is no longer used
++by the scheduler after insertion. The scheduler lookup, however, occurs in
++O(1) time because it is always the first item in the level 0 linked list.
++Since the task struct stores a copy of the node pointer upon skiplist_insert,
++it can also remove it much faster than the original implementation with the
++aid of prev<->next pointer manipulation and no searching.
++
++*/
++
++#include <linux/slab.h>
++#include <linux/skip_list.h>
++
++#define MaxNumberOfLevels 8
++#define MaxLevel (MaxNumberOfLevels - 1)
++
++void skiplist_init(skiplist_node *slnode)
++{
++ int i;
++
++ slnode->key = 0xFFFFFFFFFFFFFFFF;
++ slnode->level = 0;
++ slnode->value = NULL;
++ for (i = 0; i < MaxNumberOfLevels; i++)
++ slnode->next[i] = slnode->prev[i] = slnode;
++}
++
++skiplist *new_skiplist(skiplist_node *slnode)
++{
++ skiplist *l = kzalloc(sizeof(skiplist), GFP_ATOMIC);
++
++ BUG_ON(!l);
++ l->header = slnode;
++ return l;
++}
++
++void free_skiplist(skiplist *l)
++{
++ skiplist_node *p, *q;
++
++ p = l->header;
++ do {
++ q = p->next[0];
++ p->next[0]->prev[0] = q->prev[0];
++ skiplist_node_init(p);
++ p = q;
++ } while (p != l->header);
++ kfree(l);
++}
++
++void skiplist_node_init(skiplist_node *node)
++{
++ memset(node, 0, sizeof(skiplist_node));
++}
++
++static inline unsigned int randomLevel(const long unsigned int randseed)
++{
++ return find_first_bit(&randseed, MaxLevel) / 2;
++}
++
++void skiplist_insert(skiplist *l, skiplist_node *node, keyType key, valueType value, unsigned int randseed)
++{
++ skiplist_node *update[MaxNumberOfLevels];
++ skiplist_node *p, *q;
++ int k = l->level;
++
++ p = l->header;
++ do {
++ while (q = p->next[k], q->key <= key)
++ p = q;
++ update[k] = p;
++ } while (--k >= 0);
++
++ ++l->entries;
++ k = randomLevel(randseed);
++ if (k > l->level) {
++ k = ++l->level;
++ update[k] = l->header;
++ }
++
++ node->level = k;
++ node->key = key;
++ node->value = value;
++ do {
++ p = update[k];
++ node->next[k] = p->next[k];
++ p->next[k] = node;
++ node->prev[k] = p;
++ node->next[k]->prev[k] = node;
++ } while (--k >= 0);
++}
++
++void skiplist_delete(skiplist *l, skiplist_node *node)
++{
++ int k, m = node->level;
++
++ for (k = 0; k <= m; k++) {
++ node->prev[k]->next[k] = node->next[k];
++ node->next[k]->prev[k] = node->prev[k];
++ }
++ skiplist_node_init(node);
++ if (m == l->level) {
++ while (l->header->next[m] == l->header && l->header->prev[m] == l->header && m > 0)
++ m--;
++ l->level = m;
++ }
++ l->entries--;
++}
+diff -Nur a/kernel/sysctl.c b/kernel/sysctl.c
+--- a/kernel/sysctl.c 2019-02-09 17:20:30.491821512 +0000
++++ b/kernel/sysctl.c 2019-02-09 17:57:37.563468776 +0000
+@@ -136,6 +136,12 @@
+ static unsigned long one_ul __read_only = 1;
+ static int one_hundred __read_only = 100;
+ static int one_thousand __read_only = 1000;
++#ifdef CONFIG_SCHED_MUQSS
++extern int rr_interval;
++extern int sched_interactive;
++extern int sched_iso_cpu;
++extern int sched_yield_type;
++#endif
+ #ifdef CONFIG_PRINTK
+ static int ten_thousand __read_only = 10000;
+ #endif
+@@ -306,7 +312,7 @@
+ { }
+ };
+
+-#ifdef CONFIG_SCHED_DEBUG
++#if defined(CONFIG_SCHED_DEBUG) && !defined(CONFIG_SCHED_MUQSS)
+ static int min_sched_granularity_ns __read_only = 100000; /* 100 usecs */
+ static int max_sched_granularity_ns __read_only = NSEC_PER_SEC; /* 1 second */
+ static int min_wakeup_granularity_ns __read_only; /* 0 usecs */
+@@ -323,6 +329,7 @@
+ #endif
+
+ static struct ctl_table kern_table[] = {
++#ifndef CONFIG_SCHED_MUQSS
+ {
+ .procname = "sched_child_runs_first",
+ .data = &sysctl_sched_child_runs_first,
+@@ -477,6 +484,7 @@
+ .extra1 = &one,
+ },
+ #endif
++#endif /* !CONFIG_SCHED_MUQSS */
+ #ifdef CONFIG_PROVE_LOCKING
+ {
+ .procname = "prove_locking",
+@@ -1082,6 +1090,44 @@
+ .proc_handler = proc_dointvec,
+ },
+ #endif
++#ifdef CONFIG_SCHED_MUQSS
++ {
++ .procname = "rr_interval",
++ .data = &rr_interval,
++ .maxlen = sizeof (int),
++ .mode = 0644,
++ .proc_handler = &proc_dointvec_minmax,
++ .extra1 = &one,
++ .extra2 = &one_thousand,
++ },
++ {
++ .procname = "interactive",
++ .data = &sched_interactive,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = &proc_dointvec_minmax,
++ .extra1 = &zero,
++ .extra2 = &one,
++ },
++ {
++ .procname = "iso_cpu",
++ .data = &sched_iso_cpu,
++ .maxlen = sizeof (int),
++ .mode = 0644,
++ .proc_handler = &proc_dointvec_minmax,
++ .extra1 = &zero,
++ .extra2 = &one_hundred,
++ },
++ {
++ .procname = "yield_type",
++ .data = &sched_yield_type,
++ .maxlen = sizeof (int),
++ .mode = 0644,
++ .proc_handler = &proc_dointvec_minmax,
++ .extra1 = &zero,
++ .extra2 = &two,
++ },
++#endif
+ #if defined(CONFIG_S390) && defined(CONFIG_SMP)
+ {
+ .procname = "spin_retry",
+diff -Nur a/kernel/time/clockevents.c b/kernel/time/clockevents.c
+--- a/kernel/time/clockevents.c 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/time/clockevents.c 2019-02-09 17:46:12.001297867 +0000
+@@ -198,8 +198,13 @@
+
+ #ifdef CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST
+
++#ifdef CONFIG_SCHED_MUQSS
++/* Limit min_delta to 100us */
++#define MIN_DELTA_LIMIT (NSEC_PER_SEC / 10000)
++#else
+ /* Limit min_delta to a jiffie */
+ #define MIN_DELTA_LIMIT (NSEC_PER_SEC / HZ)
++#endif
+
+ /**
+ * clockevents_increase_min_delta - raise minimum delta of a clock event device
+diff -Nur a/kernel/time/posix-cpu-timers.c b/kernel/time/posix-cpu-timers.c
+--- a/kernel/time/posix-cpu-timers.c 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/time/posix-cpu-timers.c 2019-02-09 17:46:12.001297867 +0000
+@@ -830,7 +830,7 @@
+ tsk_expires->virt_exp = expires;
+
+ tsk_expires->sched_exp = check_timers_list(++timers, firing,
+- tsk->se.sum_exec_runtime);
++ tsk_seruntime(tsk));
+
+ /*
+ * Check for the special case thread timers.
+@@ -840,7 +840,7 @@
+ unsigned long hard = task_rlimit_max(tsk, RLIMIT_RTTIME);
+
+ if (hard != RLIM_INFINITY &&
+- tsk->rt.timeout > DIV_ROUND_UP(hard, USEC_PER_SEC/HZ)) {
++ tsk_rttimeout(tsk) > DIV_ROUND_UP(hard, USEC_PER_SEC/HZ)) {
+ /*
+ * At the hard limit, we just die.
+ * No need to calculate anything else now.
+@@ -852,7 +852,7 @@
+ __group_send_sig_info(SIGKILL, SEND_SIG_PRIV, tsk);
+ return;
+ }
+- if (tsk->rt.timeout > DIV_ROUND_UP(soft, USEC_PER_SEC/HZ)) {
++ if (tsk_rttimeout(tsk) > DIV_ROUND_UP(soft, USEC_PER_SEC/HZ)) {
+ /*
+ * At the soft limit, send a SIGXCPU every second.
+ */
+@@ -1095,7 +1095,7 @@
+ struct task_cputime task_sample;
+
+ task_cputime(tsk, &task_sample.utime, &task_sample.stime);
+- task_sample.sum_exec_runtime = tsk->se.sum_exec_runtime;
++ task_sample.sum_exec_runtime = tsk_seruntime(tsk);
+ if (task_cputime_expired(&task_sample, &tsk->cputime_expires))
+ return 1;
+ }
+diff -Nur a/kernel/time/timer.c b/kernel/time/timer.c
+--- a/kernel/time/timer.c 2019-02-09 17:20:30.491821512 +0000
++++ b/kernel/time/timer.c 2019-02-09 17:46:12.001297867 +0000
+@@ -1479,7 +1479,7 @@
+ * Check, if the next hrtimer event is before the next timer wheel
+ * event:
+ */
+-static u64 cmp_next_hrtimer_event(u64 basem, u64 expires)
++static u64 cmp_next_hrtimer_event(struct timer_base *base, u64 basem, u64 expires)
+ {
+ u64 nextevt = hrtimer_get_next_event();
+
+@@ -1497,6 +1497,9 @@
+ if (nextevt <= basem)
+ return basem;
+
++ if (nextevt < expires && nextevt - basem <= TICK_NSEC)
++ base->is_idle = false;
++
+ /*
+ * Round up to the next jiffie. High resolution timers are
+ * off, so the hrtimers are expired in the tick and we need to
+@@ -1566,7 +1569,7 @@
+ }
+ raw_spin_unlock(&base->lock);
+
+- return cmp_next_hrtimer_event(basem, expires);
++ return cmp_next_hrtimer_event(base, basem, expires);
+ }
+
+ /**
+diff -Nur a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c
+--- a/kernel/trace/trace_selftest.c 2019-02-06 16:30:16.000000000 +0000
++++ b/kernel/trace/trace_selftest.c 2019-02-09 17:46:12.001297867 +0000
+@@ -1041,10 +1041,15 @@
+ {
+ /* Make this a -deadline thread */
+ static const struct sched_attr attr = {
++#ifdef CONFIG_SCHED_MUQSS
++ /* No deadline on MuQSS, use RR */
++ .sched_policy = SCHED_RR,
++#else
+ .sched_policy = SCHED_DEADLINE,
+ .sched_runtime = 100000ULL,
+ .sched_deadline = 10000000ULL,
+ .sched_period = 10000000ULL
++#endif
+ };
+ struct wakeup_test_data *x = data;
+
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0002-Fix-Werror-build-failure-in-tools.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0002-Fix-Werror-build-failure-in-tools.patch
new file mode 100644
index 00000000..cf23010a
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0002-Fix-Werror-build-failure-in-tools.patch
@@ -0,0 +1,12 @@
+diff -Nur a/tools/objtool/Makefile b/tools/objtool/Makefile
+--- a/tools/objtool/Makefile 2019-12-17 19:36:04.000000000 +0000
++++ b/tools/objtool/Makefile 2019-12-27 23:15:17.986284113 +0000
+@@ -35,7 +35,7 @@
+ -I$(srctree)/tools/arch/$(HOSTARCH)/include/uapi \
+ -I$(srctree)/tools/objtool/arch/$(ARCH)/include
+ WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed
+-CFLAGS := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
++CFLAGS := $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
+ LDFLAGS += $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
+
+ # Allow old libelf to be used:
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0003-Make-preemptible-kernel-default.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0003-Make-preemptible-kernel-default.patch
new file mode 100644
index 00000000..176fcb54
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0003-Make-preemptible-kernel-default.patch
@@ -0,0 +1,4648 @@
+From 2432d1de7128e6ac986749bc52eb30c4c1c654d0 Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Sat, 29 Oct 2016 11:20:37 +1100
+Subject: [PATCH 03/16] Make preemptible kernel default.
+
+Make full preempt default on all arches.
+---
+ arch/arc/configs/tb10x_defconfig | 2 +-
+ arch/arm/configs/bcm2835_defconfig | 2 +-
+ arch/arm/configs/imx_v6_v7_defconfig | 2 +-
+ arch/arm/configs/mps2_defconfig | 2 +-
+ arch/arm/configs/mxs_defconfig | 2 +-
+ arch/blackfin/configs/BF518F-EZBRD_defconfig | 121 ++++
+ arch/blackfin/configs/BF526-EZBRD_defconfig | 158 ++++++
+ .../blackfin/configs/BF527-EZKIT-V2_defconfig | 188 +++++++
+ arch/blackfin/configs/BF527-EZKIT_defconfig | 181 ++++++
+ .../blackfin/configs/BF527-TLL6527M_defconfig | 178 ++++++
+ arch/blackfin/configs/BF533-EZKIT_defconfig | 114 ++++
+ arch/blackfin/configs/BF533-STAMP_defconfig | 124 +++++
+ arch/blackfin/configs/BF537-STAMP_defconfig | 136 +++++
+ arch/blackfin/configs/BF538-EZKIT_defconfig | 133 +++++
+ arch/blackfin/configs/BF548-EZKIT_defconfig | 207 +++++++
+ arch/blackfin/configs/BF561-ACVILON_defconfig | 149 +++++
+ .../configs/BF561-EZKIT-SMP_defconfig | 112 ++++
+ arch/blackfin/configs/BF561-EZKIT_defconfig | 114 ++++
+ arch/blackfin/configs/BF609-EZKIT_defconfig | 154 +++++
+ arch/blackfin/configs/BlackStamp_defconfig | 108 ++++
+ arch/blackfin/configs/CM-BF527_defconfig | 129 +++++
+ arch/blackfin/configs/PNAV-10_defconfig | 111 ++++
+ arch/blackfin/configs/SRV1_defconfig | 88 +++
+ arch/blackfin/configs/TCM-BF518_defconfig | 131 +++++
+ arch/mips/configs/fuloong2e_defconfig | 3 +-
+ arch/mips/configs/gpr_defconfig | 3 +-
+ arch/mips/configs/ip22_defconfig | 3 +-
+ arch/mips/configs/ip28_defconfig | 3 +-
+ arch/mips/configs/jazz_defconfig | 3 +-
+ arch/mips/configs/mtx1_defconfig | 3 +-
+ arch/mips/configs/nlm_xlr_defconfig | 2 +-
+ arch/mips/configs/pic32mzda_defconfig | 2 +-
+ arch/mips/configs/pistachio_defconfig | 2 +-
+ arch/mips/configs/pnx8335_stb225_defconfig | 2 +-
+ arch/mips/configs/rm200_defconfig | 3 +-
+ arch/parisc/configs/712_defconfig | 2 +-
+ arch/parisc/configs/c3000_defconfig | 2 +-
+ arch/parisc/configs/default_defconfig | 2 +-
+ arch/powerpc/configs/c2k_defconfig | 389 +++++++++++++
+ arch/powerpc/configs/ppc6xx_defconfig | 2 +-
+ arch/score/configs/spct6600_defconfig | 84 +++
+ arch/sh/configs/se7712_defconfig | 2 +-
+ arch/sh/configs/se7721_defconfig | 2 +-
+ arch/sh/configs/titan_defconfig | 2 +-
+ arch/sparc/configs/sparc64_defconfig | 2 +-
+ arch/tile/configs/tilegx_defconfig | 411 ++++++++++++++
+ arch/tile/configs/tilepro_defconfig | 524 ++++++++++++++++++
+ arch/x86/configs/i386_defconfig | 2 +-
+ arch/x86/configs/x86_64_defconfig | 2 +-
+ kernel/Kconfig.preempt | 9 +-
+ 50 files changed, 4082 insertions(+), 30 deletions(-)
+ create mode 100644 arch/blackfin/configs/BF518F-EZBRD_defconfig
+ create mode 100644 arch/blackfin/configs/BF526-EZBRD_defconfig
+ create mode 100644 arch/blackfin/configs/BF527-EZKIT-V2_defconfig
+ create mode 100644 arch/blackfin/configs/BF527-EZKIT_defconfig
+ create mode 100644 arch/blackfin/configs/BF527-TLL6527M_defconfig
+ create mode 100644 arch/blackfin/configs/BF533-EZKIT_defconfig
+ create mode 100644 arch/blackfin/configs/BF533-STAMP_defconfig
+ create mode 100644 arch/blackfin/configs/BF537-STAMP_defconfig
+ create mode 100644 arch/blackfin/configs/BF538-EZKIT_defconfig
+ create mode 100644 arch/blackfin/configs/BF548-EZKIT_defconfig
+ create mode 100644 arch/blackfin/configs/BF561-ACVILON_defconfig
+ create mode 100644 arch/blackfin/configs/BF561-EZKIT-SMP_defconfig
+ create mode 100644 arch/blackfin/configs/BF561-EZKIT_defconfig
+ create mode 100644 arch/blackfin/configs/BF609-EZKIT_defconfig
+ create mode 100644 arch/blackfin/configs/BlackStamp_defconfig
+ create mode 100644 arch/blackfin/configs/CM-BF527_defconfig
+ create mode 100644 arch/blackfin/configs/PNAV-10_defconfig
+ create mode 100644 arch/blackfin/configs/SRV1_defconfig
+ create mode 100644 arch/blackfin/configs/TCM-BF518_defconfig
+ create mode 100644 arch/powerpc/configs/c2k_defconfig
+ create mode 100644 arch/score/configs/spct6600_defconfig
+ create mode 100644 arch/tile/configs/tilegx_defconfig
+ create mode 100644 arch/tile/configs/tilepro_defconfig
+
+diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig
+index a7f65313f84a..5233307bf903 100644
+--- a/arch/arc/configs/tb10x_defconfig
++++ b/arch/arc/configs/tb10x_defconfig
+@@ -28,7 +28,7 @@ CONFIG_ARC_PLAT_TB10X=y
+ CONFIG_ARC_CACHE_LINE_SHIFT=5
+ CONFIG_HZ=250
+ CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ # CONFIG_COMPACTION is not set
+ CONFIG_NET=y
+ CONFIG_PACKET=y
+diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
+index e9bc88937b1e..73cde48ad00f 100644
+--- a/arch/arm/configs/bcm2835_defconfig
++++ b/arch/arm/configs/bcm2835_defconfig
+@@ -29,7 +29,7 @@ CONFIG_MODULE_UNLOAD=y
+ CONFIG_ARCH_MULTI_V6=y
+ CONFIG_ARCH_BCM=y
+ CONFIG_ARCH_BCM2835=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_AEABI=y
+ CONFIG_KSM=y
+ CONFIG_CLEANCACHE=y
+diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
+index 7eca43ff69bb..689095192133 100644
+--- a/arch/arm/configs/imx_v6_v7_defconfig
++++ b/arch/arm/configs/imx_v6_v7_defconfig
+@@ -48,7 +48,7 @@ CONFIG_PCI_MSI=y
+ CONFIG_PCI_IMX6=y
+ CONFIG_SMP=y
+ CONFIG_ARM_PSCI=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_HIGHMEM=y
+ CONFIG_FORCE_MAX_ZONEORDER=14
+ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
+diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig
+index 0bcdec7cc169..10ceaefa51e0 100644
+--- a/arch/arm/configs/mps2_defconfig
++++ b/arch/arm/configs/mps2_defconfig
+@@ -18,7 +18,7 @@ CONFIG_ARCH_MPS2=y
+ CONFIG_SET_MEM_PARAM=y
+ CONFIG_DRAM_BASE=0x21000000
+ CONFIG_DRAM_SIZE=0x1000000
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ # CONFIG_ATAGS is not set
+ CONFIG_ZBOOT_ROM_TEXT=0x0
+ CONFIG_ZBOOT_ROM_BSS=0x0
+diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
+index 7b8212857535..6c1b8a1d9d59 100644
+--- a/arch/arm/configs/mxs_defconfig
++++ b/arch/arm/configs/mxs_defconfig
+@@ -26,7 +26,7 @@ CONFIG_BLK_DEV_INTEGRITY=y
+ # CONFIG_ARCH_MULTI_V7 is not set
+ CONFIG_ARCH_MXS=y
+ # CONFIG_ARM_THUMB is not set
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_AEABI=y
+ CONFIG_NET=y
+ CONFIG_PACKET=y
+diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
+new file mode 100644
+index 000000000000..39b91dfa55b5
+--- /dev/null
++++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
+@@ -0,0 +1,121 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF518=y
++CONFIG_IRQ_TIMER0=12
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_JEDECPROBE=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++CONFIG_NET_BFIN=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++# CONFIG_NET_VENDOR_SMSC is not set
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++# CONFIG_USB_SUPPORT is not set
++CONFIG_MMC=y
++CONFIG_SDH_BFIN=y
++CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=m
++# CONFIG_DNOTIFY is not set
++CONFIG_VFAT_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_NLS_CODEPAGE_437=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_UTF8=m
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRC_CCITT=m
+diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
+new file mode 100644
+index 000000000000..675cadb3a0c4
+--- /dev/null
++++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
+@@ -0,0 +1,158 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF526=y
++CONFIG_IRQ_TIMER0=12
++CONFIG_BFIN526_EZBRD=y
++CONFIG_IRQ_USB_INT0=11
++CONFIG_IRQ_USB_INT1=11
++CONFIG_IRQ_USB_INT2=11
++CONFIG_IRQ_USB_DMA=11
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_M25P80=y
++CONFIG_MTD_NAND=m
++CONFIG_MTD_SPI_NOR=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=y
++CONFIG_BLK_DEV_SR=m
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++CONFIG_NET_BFIN=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++# CONFIG_NET_VENDOR_SMSC is not set
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++CONFIG_INPUT_FF_MEMLESS=m
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART1=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_HID_A4TECH=y
++CONFIG_HID_APPLE=y
++CONFIG_HID_BELKIN=y
++CONFIG_HID_CHERRY=y
++CONFIG_HID_CHICONY=y
++CONFIG_HID_CYPRESS=y
++CONFIG_HID_EZKEY=y
++CONFIG_HID_GYRATION=y
++CONFIG_HID_LOGITECH=y
++CONFIG_HID_MICROSOFT=y
++CONFIG_HID_MONTEREY=y
++CONFIG_HID_PANTHERLORD=y
++CONFIG_HID_PETALYNX=y
++CONFIG_HID_SAMSUNG=y
++CONFIG_HID_SONY=y
++CONFIG_HID_SUNPLUS=y
++CONFIG_USB=y
++# CONFIG_USB_DEVICE_CLASS is not set
++CONFIG_USB_OTG_BLACKLIST_HUB=y
++CONFIG_USB_MON=y
++CONFIG_USB_STORAGE=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=m
++# CONFIG_DNOTIFY is not set
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_VFAT_FS=m
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_NLS_CODEPAGE_437=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_UTF8=m
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRC_CCITT=m
+diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
+new file mode 100644
+index 000000000000..4c517c443af5
+--- /dev/null
++++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
+@@ -0,0 +1,188 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF527=y
++CONFIG_BF_REV_0_2=y
++CONFIG_BFIN527_EZKIT_V2=y
++CONFIG_IRQ_USB_INT0=11
++CONFIG_IRQ_USB_INT1=11
++CONFIG_IRQ_USB_INT2=11
++CONFIG_IRQ_USB_DMA=11
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRTTY_SIR=m
++CONFIG_BFIN_SIR=m
++CONFIG_BFIN_SIR0=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_JEDECPROBE=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_M25P80=y
++CONFIG_MTD_NAND=m
++CONFIG_MTD_SPI_NOR=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=y
++CONFIG_BLK_DEV_SR=m
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++CONFIG_NET_BFIN=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++# CONFIG_NET_VENDOR_SMSC is not set
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++CONFIG_INPUT_FF_MEMLESS=m
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=y
++CONFIG_KEYBOARD_ADP5520=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_AD7879=y
++CONFIG_TOUCHSCREEN_AD7879_I2C=y
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART1=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_PMIC_ADP5520=y
++CONFIG_FB=y
++CONFIG_FB_BFIN_LQ035Q1=y
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++# CONFIG_LOGO_LINUX_CLUT224 is not set
++# CONFIG_LOGO_BLACKFIN_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=y
++CONFIG_SND_SOC=y
++CONFIG_SND_BF5XX_I2S=y
++CONFIG_SND_BF5XX_SOC_SSM2602=y
++CONFIG_HID_A4TECH=y
++CONFIG_HID_APPLE=y
++CONFIG_HID_BELKIN=y
++CONFIG_HID_CHERRY=y
++CONFIG_HID_CHICONY=y
++CONFIG_HID_CYPRESS=y
++CONFIG_HID_EZKEY=y
++CONFIG_HID_GYRATION=y
++CONFIG_HID_LOGITECH=y
++CONFIG_HID_MICROSOFT=y
++CONFIG_HID_MONTEREY=y
++CONFIG_HID_PANTHERLORD=y
++CONFIG_HID_PETALYNX=y
++CONFIG_HID_SAMSUNG=y
++CONFIG_HID_SONY=y
++CONFIG_HID_SUNPLUS=y
++CONFIG_USB=y
++# CONFIG_USB_DEVICE_CLASS is not set
++CONFIG_USB_OTG_BLACKLIST_HUB=y
++CONFIG_USB_MON=y
++CONFIG_USB_MUSB_HDRC=y
++CONFIG_USB_MUSB_BLACKFIN=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_GADGET=y
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++CONFIG_LEDS_ADP5520=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=m
++# CONFIG_DNOTIFY is not set
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_UDF_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_NLS_CODEPAGE_437=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_UTF8=m
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
+new file mode 100644
+index 000000000000..bf8df3e6cf02
+--- /dev/null
++++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
+@@ -0,0 +1,181 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF527=y
++CONFIG_BF_REV_0_1=y
++CONFIG_IRQ_USB_INT0=11
++CONFIG_IRQ_USB_INT1=11
++CONFIG_IRQ_USB_INT2=11
++CONFIG_IRQ_USB_DMA=11
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRTTY_SIR=m
++CONFIG_BFIN_SIR=m
++CONFIG_BFIN_SIR0=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_JEDECPROBE=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_M25P80=y
++CONFIG_MTD_NAND=m
++CONFIG_MTD_SPI_NOR=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=y
++CONFIG_BLK_DEV_SR=m
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++CONFIG_NET_BFIN=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++# CONFIG_NET_VENDOR_SMSC is not set
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++CONFIG_INPUT_FF_MEMLESS=m
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART1=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_FB=y
++CONFIG_FB_BFIN_T350MCQB=y
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_LTV350QV=m
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++# CONFIG_LOGO_LINUX_CLUT224 is not set
++# CONFIG_LOGO_BLACKFIN_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=y
++CONFIG_SND_SOC=y
++CONFIG_SND_BF5XX_I2S=y
++CONFIG_SND_BF5XX_SOC_SSM2602=y
++CONFIG_HID_A4TECH=y
++CONFIG_HID_APPLE=y
++CONFIG_HID_BELKIN=y
++CONFIG_HID_CHERRY=y
++CONFIG_HID_CHICONY=y
++CONFIG_HID_CYPRESS=y
++CONFIG_HID_EZKEY=y
++CONFIG_HID_GYRATION=y
++CONFIG_HID_LOGITECH=y
++CONFIG_HID_MICROSOFT=y
++CONFIG_HID_MONTEREY=y
++CONFIG_HID_PANTHERLORD=y
++CONFIG_HID_PETALYNX=y
++CONFIG_HID_SAMSUNG=y
++CONFIG_HID_SONY=y
++CONFIG_HID_SUNPLUS=y
++CONFIG_USB=y
++# CONFIG_USB_DEVICE_CLASS is not set
++CONFIG_USB_OTG_BLACKLIST_HUB=y
++CONFIG_USB_MON=y
++CONFIG_USB_MUSB_HDRC=y
++CONFIG_MUSB_PIO_ONLY=y
++CONFIG_USB_MUSB_BLACKFIN=y
++CONFIG_MUSB_PIO_ONLY=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_GADGET=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=m
++# CONFIG_DNOTIFY is not set
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_UDF_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_NLS_CODEPAGE_437=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_UTF8=m
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF527-TLL6527M_defconfig b/arch/blackfin/configs/BF527-TLL6527M_defconfig
+new file mode 100644
+index 000000000000..0220b3b15c53
+--- /dev/null
++++ b/arch/blackfin/configs/BF527-TLL6527M_defconfig
+@@ -0,0 +1,178 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_LOCALVERSION="DEV_0-1_pre2010"
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_PREEMPT=y
++CONFIG_BF527=y
++CONFIG_BF_REV_0_2=y
++CONFIG_BFIN527_TLL6527M=y
++CONFIG_BF527_UART1_PORTG=y
++CONFIG_IRQ_USB_INT0=11
++CONFIG_IRQ_USB_INT1=11
++CONFIG_IRQ_USB_INT2=11
++CONFIG_IRQ_USB_DMA=11
++CONFIG_BOOT_LOAD=0x400000
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=y
++CONFIG_DMA_UNCACHED_2M=y
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_0=0xFFC2
++CONFIG_BANK_1=0xFFC2
++CONFIG_BANK_2=0xFFC2
++CONFIG_BANK_3=0xFFC2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRTTY_SIR=m
++CONFIG_BFIN_SIR=m
++CONFIG_BFIN_SIR0=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_GPIO_ADDR=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=y
++CONFIG_BLK_DEV_SR=m
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++CONFIG_NET_ETHERNET=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_AD7879=m
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_AD714X=y
++CONFIG_INPUT_ADXL34X=y
++# CONFIG_SERIO is not set
++CONFIG_BFIN_PPI=m
++CONFIG_BFIN_SIMPLE_TIMER=m
++CONFIG_BFIN_SPORT=m
++# CONFIG_CONSOLE_TRANSLATIONS is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_BFIN_JTAG_COMM=m
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART1=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C_CHARDEV=y
++# CONFIG_I2C_HELPER_AUTO is not set
++CONFIG_I2C_SMBUS=y
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_MEDIA_SUPPORT=y
++CONFIG_VIDEO_DEV=y
++# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
++CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
++CONFIG_VIDEO_BLACKFIN_CAM=m
++CONFIG_OV9655=y
++CONFIG_FB=y
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_FONTS=y
++CONFIG_FONT_6x11=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++# CONFIG_LOGO_LINUX_CLUT224 is not set
++# CONFIG_LOGO_BLACKFIN_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=y
++CONFIG_SND_MIXER_OSS=y
++CONFIG_SND_PCM_OSS=y
++CONFIG_SND_SOC=y
++CONFIG_SND_BF5XX_I2S=y
++CONFIG_SND_BF5XX_SOC_SSM2602=y
++# CONFIG_HID_SUPPORT is not set
++# CONFIG_USB_SUPPORT is not set
++CONFIG_MMC=m
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=y
++# CONFIG_DNOTIFY is not set
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_UDF_FS=m
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_JFFS2_FS=y
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++CONFIG_NLS_CODEPAGE_437=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_UTF8=m
++CONFIG_DEBUG_KERNEL=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRC7=m
+diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
+new file mode 100644
+index 000000000000..6023e3fd2c48
+--- /dev/null
++++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
+@@ -0,0 +1,114 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BFIN533_EZKIT=y
++CONFIG_TIMER0=11
++CONFIG_CLKIN_HZ=27000000
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0xAAC2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRTTY_SIR=m
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_CFI_AMDSTD=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PLATRAM=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++CONFIG_SMC91X=y
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++CONFIG_INPUT=m
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++# CONFIG_USB_SUPPORT is not set
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++# CONFIG_DNOTIFY is not set
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
+new file mode 100644
+index 000000000000..f5cd0f18b711
+--- /dev/null
++++ b/arch/blackfin/configs/BF533-STAMP_defconfig
+@@ -0,0 +1,124 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_TIMER0=11
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0xAAC2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRTTY_SIR=m
++CONFIG_BFIN_SIR=m
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=m
++CONFIG_MTD_CFI_AMDSTD=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++CONFIG_SMC91X=y
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=m
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_GPIO=m
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_FB=m
++CONFIG_FIRMWARE_EDID=y
++CONFIG_SOUND=m
++CONFIG_SND=m
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_SOC=m
++CONFIG_SND_BF5XX_I2S=m
++CONFIG_SND_BF5XX_SOC_AD73311=m
++# CONFIG_USB_SUPPORT is not set
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++# CONFIG_DNOTIFY is not set
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
+new file mode 100644
+index 000000000000..48085fde7f9e
+--- /dev/null
++++ b/arch/blackfin/configs/BF537-STAMP_defconfig
+@@ -0,0 +1,136 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF537=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_CAN=m
++CONFIG_CAN_RAW=m
++CONFIG_CAN_BCM=m
++CONFIG_CAN_BFIN=m
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRTTY_SIR=m
++CONFIG_BFIN_SIR=m
++CONFIG_BFIN_SIR1=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=m
++CONFIG_MTD_CFI_AMDSTD=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_PHYSMAP=m
++CONFIG_MTD_M25P80=y
++CONFIG_MTD_SPI_NOR=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++CONFIG_NET_BFIN=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++# CONFIG_NET_VENDOR_SMSC is not set
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=m
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_BLACKFIN_TWI=m
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_FB=m
++CONFIG_FIRMWARE_EDID=y
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_SOUND=m
++CONFIG_SND=m
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_SOC=m
++CONFIG_SND_BF5XX_I2S=m
++CONFIG_SND_BF5XX_SOC_AD73311=m
++# CONFIG_USB_SUPPORT is not set
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++# CONFIG_DNOTIFY is not set
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
+new file mode 100644
+index 000000000000..12deeaaef3cb
+--- /dev/null
++++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
+@@ -0,0 +1,133 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF538=y
++CONFIG_IRQ_TIMER0=12
++CONFIG_IRQ_TIMER1=12
++CONFIG_IRQ_TIMER2=12
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_PM=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_CAN=m
++CONFIG_CAN_RAW=m
++CONFIG_CAN_BCM=m
++CONFIG_CAN_DEV=m
++CONFIG_CAN_BFIN=m
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRTTY_SIR=m
++CONFIG_BFIN_SIR=m
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=m
++CONFIG_MTD_CFI_AMDSTD=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_PHYSMAP=m
++CONFIG_MTD_NAND=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++CONFIG_PHYLIB=y
++CONFIG_SMSC_PHY=y
++CONFIG_NET_ETHERNET=y
++CONFIG_SMC91X=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_AD7879=y
++CONFIG_TOUCHSCREEN_AD7879_SPI=y
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_BFIN_JTAG_COMM=m
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++CONFIG_SERIAL_BFIN_UART1=y
++CONFIG_SERIAL_BFIN_UART2=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=m
++CONFIG_I2C_BLACKFIN_TWI=m
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_FB=m
++CONFIG_FB_BFIN_LQ035Q1=m
++# CONFIG_USB_SUPPORT is not set
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++# CONFIG_DNOTIFY is not set
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_SMB_FS=m
++CONFIG_DEBUG_KERNEL=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
+new file mode 100644
+index 000000000000..6a68ffc55b5a
+--- /dev/null
++++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
+@@ -0,0 +1,207 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF548_std=y
++CONFIG_IRQ_TIMER0=11
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_CACHELINE_ALIGNED_L1=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_DMA_UNCACHED_2M=y
++CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
++CONFIG_BANK_3=0x99B2
++CONFIG_EBIU_MBSCTLVAL=0x0
++CONFIG_EBIU_MODEVAL=0x1
++CONFIG_EBIU_FCTLVAL=0x6
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_CAN=m
++CONFIG_CAN_RAW=m
++CONFIG_CAN_BCM=m
++CONFIG_CAN_BFIN=m
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRTTY_SIR=m
++CONFIG_BFIN_SIR=m
++CONFIG_BFIN_SIR3=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_FW_LOADER=m
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_M25P80=y
++CONFIG_MTD_NAND=y
++CONFIG_MTD_NAND_BF5XX=y
++# CONFIG_MTD_NAND_BF5XX_HWECC is not set
++CONFIG_MTD_SPI_NOR=y
++CONFIG_BLK_DEV_RAM=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=y
++CONFIG_BLK_DEV_SR=m
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_ATA=y
++# CONFIG_SATA_PMP is not set
++CONFIG_PATA_BF54X=y
++CONFIG_NETDEVICES=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++CONFIG_SMSC911X=y
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++CONFIG_INPUT_FF_MEMLESS=m
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++CONFIG_INPUT_EVBUG=m
++# CONFIG_KEYBOARD_ATKBD is not set
++CONFIG_KEYBOARD_BFIN=y
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_AD7877=m
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART1=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_FB=y
++CONFIG_FIRMWARE_EDID=y
++CONFIG_FB_BF54X_LQ043=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_FONTS=y
++CONFIG_FONT_6x11=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++# CONFIG_LOGO_LINUX_CLUT224 is not set
++# CONFIG_LOGO_BLACKFIN_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=y
++CONFIG_SND_MIXER_OSS=y
++CONFIG_SND_PCM_OSS=y
++CONFIG_SND_SOC=y
++CONFIG_SND_BF5XX_AC97=y
++CONFIG_SND_BF5XX_SOC_AD1980=y
++CONFIG_HID_A4TECH=y
++CONFIG_HID_APPLE=y
++CONFIG_HID_BELKIN=y
++CONFIG_HID_CHERRY=y
++CONFIG_HID_CHICONY=y
++CONFIG_HID_CYPRESS=y
++CONFIG_HID_EZKEY=y
++CONFIG_HID_GYRATION=y
++CONFIG_HID_LOGITECH=y
++CONFIG_HID_MICROSOFT=y
++CONFIG_HID_MONTEREY=y
++CONFIG_HID_PANTHERLORD=y
++CONFIG_HID_PETALYNX=y
++CONFIG_HID_SAMSUNG=y
++CONFIG_HID_SONY=y
++CONFIG_HID_SUNPLUS=y
++CONFIG_USB=y
++# CONFIG_USB_DEVICE_CLASS is not set
++CONFIG_USB_OTG_BLACKLIST_HUB=y
++CONFIG_USB_MON=y
++CONFIG_USB_MUSB_HDRC=y
++CONFIG_USB_MUSB_BLACKFIN=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_GADGET=y
++CONFIG_MMC=y
++CONFIG_MMC_BLOCK=m
++CONFIG_SDH_BFIN=y
++CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++# CONFIG_DNOTIFY is not set
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_NTFS_FS=m
++CONFIG_NTFS_RW=y
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_NFSD=m
++CONFIG_NFSD_V3=y
++CONFIG_CIFS=y
++CONFIG_NLS_CODEPAGE_437=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_UTF8=m
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig
+new file mode 100644
+index 000000000000..e9f3ba783a4e
+--- /dev/null
++++ b/arch/blackfin/configs/BF561-ACVILON_defconfig
+@@ -0,0 +1,149 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_PREEMPT=y
++CONFIG_BF561=y
++CONFIG_BF_REV_0_5=y
++CONFIG_IRQ_TIMER0=10
++CONFIG_BFIN561_ACVILON=y
++# CONFIG_BF561_COREB is not set
++CONFIG_CLKIN_HZ=12000000
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=y
++CONFIG_DMA_UNCACHED_4M=y
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_0=0x99b2
++CONFIG_BANK_1=0x3350
++CONFIG_BANK_3=0xAAC2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_LRO is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_PLATRAM=y
++CONFIG_MTD_PHRAM=y
++CONFIG_MTD_BLOCK2MTD=y
++CONFIG_MTD_NAND=y
++CONFIG_MTD_NAND_PLATFORM=y
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=2
++CONFIG_BLK_DEV_RAM_SIZE=16384
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=y
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++CONFIG_NET_ETHERNET=y
++CONFIG_SMSC911X=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_PIO=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_PCA_PLATFORM=y
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_SPI_SPIDEV=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++CONFIG_GPIO_PCF857X=y
++CONFIG_SENSORS_LM75=y
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_SOUND=y
++CONFIG_SND=y
++CONFIG_SND_MIXER_OSS=y
++CONFIG_SND_PCM_OSS=y
++# CONFIG_SND_DRIVERS is not set
++# CONFIG_SND_USB is not set
++CONFIG_SND_SOC=y
++CONFIG_SND_BF5XX_I2S=y
++CONFIG_SND_BF5XX_SPORT_NUM=1
++CONFIG_USB=y
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++# CONFIG_USB_DEVICE_CLASS is not set
++CONFIG_USB_MON=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_SERIAL=y
++CONFIG_USB_SERIAL_FTDI_SIO=y
++CONFIG_USB_SERIAL_PL2303=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_DS1307=y
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++CONFIG_EXT2_FS_POSIX_ACL=y
++CONFIG_EXT2_FS_SECURITY=y
++# CONFIG_DNOTIFY is not set
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=866
++CONFIG_FAT_DEFAULT_IOCHARSET="cp1251"
++CONFIG_NTFS_FS=y
++CONFIG_CONFIGFS_FS=y
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_COMPRESSION_OPTIONS=y
++# CONFIG_JFFS2_ZLIB is not set
++CONFIG_JFFS2_LZO=y
++# CONFIG_JFFS2_RTIME is not set
++CONFIG_JFFS2_CMODE_FAVOURLZO=y
++CONFIG_CRAMFS=y
++CONFIG_MINIX_FS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++CONFIG_ROOT_NFS=y
++CONFIG_NLS_DEFAULT="cp1251"
++CONFIG_NLS_CODEPAGE_866=y
++CONFIG_NLS_CODEPAGE_1251=y
++CONFIG_NLS_KOI8_R=y
++CONFIG_NLS_UTF8=y
++CONFIG_DEBUG_KERNEL=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++# CONFIG_DEBUG_BUGVERBOSE is not set
++CONFIG_DEBUG_INFO=y
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
++CONFIG_CPLB_INFO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig b/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig
+new file mode 100644
+index 000000000000..89b75a6c3fab
+--- /dev/null
++++ b/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig
+@@ -0,0 +1,112 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF561=y
++CONFIG_SMP=y
++CONFIG_IRQ_TIMER0=10
++CONFIG_CLKIN_HZ=30000000
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0xAAC2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRTTY_SIR=m
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_AMDSTD=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_PHYSMAP=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++CONFIG_SMC91X=y
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++CONFIG_INPUT=m
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++# CONFIG_USB_SUPPORT is not set
++# CONFIG_DNOTIFY is not set
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
+new file mode 100644
+index 000000000000..67b3d2f419ba
+--- /dev/null
++++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
+@@ -0,0 +1,114 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF561=y
++CONFIG_IRQ_TIMER0=10
++CONFIG_CLKIN_HZ=30000000
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
++CONFIG_BFIN_L2_DCACHEABLE=y
++CONFIG_BFIN_L2_WRITETHROUGH=y
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0xAAC2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRTTY_SIR=m
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_AMDSTD=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_PHYSMAP=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++CONFIG_SMC91X=y
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_WLAN is not set
++CONFIG_INPUT=m
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_JTAG_COMM=m
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++# CONFIG_USB_SUPPORT is not set
++# CONFIG_DNOTIFY is not set
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
+diff --git a/arch/blackfin/configs/BF609-EZKIT_defconfig b/arch/blackfin/configs/BF609-EZKIT_defconfig
+new file mode 100644
+index 000000000000..8cc75d4218fb
+--- /dev/null
++++ b/arch/blackfin/configs/BF609-EZKIT_defconfig
+@@ -0,0 +1,154 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EXPERT=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF609=y
++CONFIG_PINT1_ASSIGN=0x01010000
++CONFIG_PINT2_ASSIGN=0x07000101
++CONFIG_PINT3_ASSIGN=0x02020303
++CONFIG_IP_CHECKSUM_L1=y
++CONFIG_SYSCALL_TAB_L1=y
++CONFIG_CPLB_SWITCH_TAB_L1=y
++# CONFIG_APP_STACK_L1 is not set
++# CONFIG_BFIN_INS_LOWOVERHEAD is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_PM_BFIN_WAKE_PE12=y
++CONFIG_PM_BFIN_WAKE_PE12_POL=1
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++CONFIG_IP_PNP_RARP=y
++# CONFIG_IPV6 is not set
++CONFIG_NETFILTER=y
++CONFIG_CAN=y
++CONFIG_CAN_BFIN=y
++CONFIG_IRDA=y
++CONFIG_IRTTY_SIR=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_FW_LOADER=m
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_CFI_STAA=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_M25P80=y
++CONFIG_MTD_SPI_NOR=y
++CONFIG_MTD_UBI=m
++CONFIG_SCSI=y
++CONFIG_BLK_DEV_SD=y
++CONFIG_NETDEVICES=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CHELSIO is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_MICROCHIP is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++# CONFIG_NET_VENDOR_SMSC is not set
++CONFIG_STMMAC_ETH=y
++CONFIG_STMMAC_IEEE1588=y
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_BFIN_ROTARY=y
++# CONFIG_SERIO is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_BFIN_SIMPLE_TIMER=m
++# CONFIG_BFIN_CRC is not set
++CONFIG_BFIN_LINKPORT=y
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_ADI_V3=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++CONFIG_PINCTRL_MCP23S08=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_SOUND=m
++CONFIG_SND=m
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++# CONFIG_SND_DRIVERS is not set
++# CONFIG_SND_SPI is not set
++# CONFIG_SND_USB is not set
++CONFIG_SND_SOC=m
++CONFIG_USB=y
++CONFIG_USB_MUSB_HDRC=y
++CONFIG_USB_MUSB_BLACKFIN=m
++CONFIG_USB_STORAGE=y
++CONFIG_USB_GADGET=y
++CONFIG_USB_GADGET_MUSB_HDRC=y
++CONFIG_USB_ZERO=y
++CONFIG_MMC=y
++CONFIG_SDH_BFIN=y
++# CONFIG_IOMMU_SUPPORT is not set
++CONFIG_EXT2_FS=y
++# CONFIG_DNOTIFY is not set
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_JFFS2_FS=m
++CONFIG_UBIFS_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_ISO8859_1=y
++CONFIG_DEBUG_FS=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++CONFIG_FRAME_POINTER=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_BFIN_PSEUDODBG_INSNS=y
++CONFIG_CRYPTO_HMAC=m
++CONFIG_CRYPTO_MD4=m
++CONFIG_CRYPTO_MD5=m
++CONFIG_CRYPTO_ARC4=m
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRYPTO_DEV_BFIN_CRC=m
+diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
+new file mode 100644
+index 000000000000..9faf0ec7007f
+--- /dev/null
++++ b/arch/blackfin/configs/BlackStamp_defconfig
+@@ -0,0 +1,108 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_SYSFS_DEPRECATED_V2=y
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_PREEMPT=y
++CONFIG_BF532=y
++CONFIG_BF_REV_0_5=y
++CONFIG_BLACKSTAMP=y
++CONFIG_TIMER0=11
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_ROMKERNEL=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=y
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0xAAC2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_BINFMT_SHARED_FLAT=y
++CONFIG_PM=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_LRO is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=m
++CONFIG_MTD_CFI_AMDSTD=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_M25P80=y
++CONFIG_MTD_SPI_NOR=y
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_NBD=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_MISC_DEVICES=y
++CONFIG_EEPROM_AT25=y
++CONFIG_NETDEVICES=y
++CONFIG_NET_ETHERNET=y
++CONFIG_SMC91X=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_HW_RANDOM=y
++CONFIG_I2C=m
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_GPIO=m
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_SPI_SPIDEV=m
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++# CONFIG_USB_SUPPORT is not set
++CONFIG_MMC=y
++CONFIG_MMC_SPI=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++# CONFIG_DNOTIFY is not set
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_JFFS2_FS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++CONFIG_NFS_V4=y
++CONFIG_SMB_FS=y
++CONFIG_CIFS=y
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_UTF8=y
++CONFIG_SYSCTL_SYSCALL_CHECK=y
++CONFIG_DEBUG_MMRS=y
++# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_CRC_CCITT=m
+diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
+new file mode 100644
+index 000000000000..4a1ad4fd7bb2
+--- /dev/null
++++ b/arch/blackfin/configs/CM-BF527_defconfig
+@@ -0,0 +1,129 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_KERNEL_LZMA=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_RD_GZIP is not set
++CONFIG_RD_LZMA=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_PREEMPT=y
++CONFIG_BF527=y
++CONFIG_BF_REV_0_1=y
++CONFIG_IRQ_TIMER0=12
++CONFIG_BFIN527_BLUETECHNIX_CM=y
++CONFIG_IRQ_USB_INT0=11
++CONFIG_IRQ_USB_INT1=11
++CONFIG_IRQ_USB_INT2=11
++CONFIG_IRQ_USB_DMA=11
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=y
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0xFFC0
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_GPIO_ADDR=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_SCSI=y
++CONFIG_BLK_DEV_SD=y
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++CONFIG_NET_ETHERNET=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++CONFIG_SERIAL_BFIN_UART1=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_BLACKFIN_TWI=m
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++CONFIG_USB=m
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++# CONFIG_USB_DEVICE_CLASS is not set
++CONFIG_USB_OTG_BLACKLIST_HUB=y
++CONFIG_USB_MON=m
++CONFIG_USB_MUSB_HDRC=m
++CONFIG_USB_MUSB_PERIPHERAL=y
++CONFIG_USB_GADGET_MUSB_HDRC=y
++CONFIG_MUSB_PIO_ONLY=y
++CONFIG_USB_STORAGE=m
++CONFIG_USB_GADGET=m
++CONFIG_USB_ETH=m
++CONFIG_USB_MASS_STORAGE=m
++CONFIG_USB_G_SERIAL=m
++CONFIG_USB_G_PRINTER=m
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++# CONFIG_DNOTIFY is not set
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_JFFS2_FS=y
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_SMB_FS=m
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_ISO8859_1=y
++CONFIG_DEBUG_FS=y
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
++CONFIG_EARLY_PRINTK=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRC_CCITT=m
++CONFIG_CRC_ITU_T=y
++CONFIG_CRC7=y
+diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
+new file mode 100644
+index 000000000000..9d787e28bbe8
+--- /dev/null
++++ b/arch/blackfin/configs/PNAV-10_defconfig
+@@ -0,0 +1,111 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF537=y
++CONFIG_IRQ_TIMER0=12
++CONFIG_PNAV10=y
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++CONFIG_IP_CHECKSUM_L1=y
++CONFIG_SYSCALL_TAB_L1=y
++CONFIG_CPLB_SWITCH_TAB_L1=y
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=y
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_1=0x33B0
++CONFIG_BANK_2=0x33B0
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_UCLINUX=y
++CONFIG_MTD_NAND=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++CONFIG_NET_ETHERNET=y
++CONFIG_BFIN_MAC=y
++# CONFIG_BFIN_MAC_USE_L1 is not set
++CONFIG_BFIN_TX_DESC_NUM=100
++CONFIG_BFIN_RX_DESC_NUM=100
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_AD7877=y
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_UINPUT=y
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++CONFIG_SERIAL_BFIN_UART1=y
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_HW_RANDOM=y
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_FB=y
++CONFIG_FIRMWARE_EDID=y
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_BACKLIGHT_CLASS_DEVICE=y
++CONFIG_SOUND=y
++CONFIG_SND=m
++# CONFIG_SND_SUPPORT_OLD_API is not set
++# CONFIG_SND_VERBOSE_PROCFS is not set
++CONFIG_SOUND_PRIME=y
++# CONFIG_HID is not set
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++# CONFIG_DNOTIFY is not set
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_SMB_FS=m
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
++# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
++# CONFIG_ACCESS_CHECK is not set
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRC_CCITT=m
+diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
+new file mode 100644
+index 000000000000..225df32dc9a8
+--- /dev/null
++++ b/arch/blackfin/configs/SRV1_defconfig
+@@ -0,0 +1,88 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_SYSVIPC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS_ALL=y
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_PREEMPT=y
++CONFIG_BF537=y
++CONFIG_IRQ_TIMER0=12
++CONFIG_BOOT_LOAD=0x400000
++CONFIG_CLKIN_HZ=22118400
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_DMA_UNCACHED_2M=y
++CONFIG_C_CDPRIO=y
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_PM=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_IPV6 is not set
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRTTY_SIR=m
++# CONFIG_WIRELESS is not set
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_JEDECPROBE=m
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_UCLINUX=y
++CONFIG_MTD_NAND=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_MISC_DEVICES=y
++CONFIG_EEPROM_AT25=m
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_UINPUT=y
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_HWMON=m
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++# CONFIG_HID is not set
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++# CONFIG_DNOTIFY is not set
++CONFIG_JFFS2_FS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_SMB_FS=m
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_BUGVERBOSE is not set
++CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
++CONFIG_CPLB_INFO=y
+diff --git a/arch/blackfin/configs/TCM-BF518_defconfig b/arch/blackfin/configs/TCM-BF518_defconfig
+new file mode 100644
+index 000000000000..425c24e43c34
+--- /dev/null
++++ b/arch/blackfin/configs/TCM-BF518_defconfig
+@@ -0,0 +1,131 @@
++CONFIG_EXPERIMENTAL=y
++CONFIG_KERNEL_LZMA=y
++CONFIG_SYSVIPC=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_RD_GZIP is not set
++CONFIG_RD_LZMA=y
++CONFIG_EXPERT=y
++# CONFIG_SYSCTL_SYSCALL is not set
++# CONFIG_ELF_CORE is not set
++# CONFIG_FUTEX is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_AIO is not set
++CONFIG_SLAB=y
++CONFIG_MMAP_ALLOW_UNINITIALIZED=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_PREEMPT=y
++CONFIG_BF518=y
++CONFIG_BF_REV_0_1=y
++CONFIG_BFIN518F_TCM=y
++CONFIG_IRQ_TIMER0=12
++# CONFIG_CYCLES_CLOCKSOURCE is not set
++# CONFIG_SCHEDULE_L1 is not set
++# CONFIG_MEMSET_L1 is not set
++# CONFIG_MEMCPY_L1 is not set
++# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
++CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
++CONFIG_BFIN_GPTIMERS=m
++CONFIG_C_CDPRIO=y
++CONFIG_BANK_3=0x99B2
++CONFIG_BINFMT_FLAT=y
++CONFIG_BINFMT_ZFLAT=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_PNP=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FW_LOADER is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_ADV_OPTIONS=y
++CONFIG_MTD_CFI_GEOMETRY=y
++# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
++# CONFIG_MTD_CFI_I2 is not set
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_RAM=y
++CONFIG_MTD_ROM=m
++CONFIG_MTD_PHYSMAP=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_NETDEVICES=y
++CONFIG_NET_ETHERNET=y
++CONFIG_BFIN_MAC=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++# CONFIG_SERIO is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_BFIN_JTAG_COMM=m
++CONFIG_SERIAL_BFIN=y
++CONFIG_SERIAL_BFIN_CONSOLE=y
++CONFIG_SERIAL_BFIN_UART0=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_HW_RANDOM is not set
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_BLACKFIN_TWI=y
++CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
++CONFIG_SPI=y
++CONFIG_SPI_BFIN5XX=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BFIN_WDT=y
++# CONFIG_HID_SUPPORT is not set
++# CONFIG_USB_SUPPORT is not set
++CONFIG_MMC=y
++CONFIG_MMC_DEBUG=y
++CONFIG_MMC_SPI=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_BFIN=y
++CONFIG_EXT2_FS=y
++# CONFIG_DNOTIFY is not set
++CONFIG_VFAT_FS=m
++# CONFIG_MISC_FILESYSTEMS is not set
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++CONFIG_ROOT_NFS=y
++CONFIG_NLS_CODEPAGE_437=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_UTF8=m
++CONFIG_DEBUG_KERNEL=y
++CONFIG_DEBUG_SHIRQ=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_MMRS=y
++CONFIG_DEBUG_HWERR=y
++CONFIG_EXACT_HWERR=y
++CONFIG_DEBUG_DOUBLEFAULT=y
++CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_CPLB_INFO=y
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRC_CCITT=m
+diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig
+index 499f51498ecb..f7cb39b0662c 100644
+--- a/arch/mips/configs/fuloong2e_defconfig
++++ b/arch/mips/configs/fuloong2e_defconfig
+@@ -2,7 +2,8 @@ CONFIG_MACH_LOONGSON64=y
+ CONFIG_64BIT=y
+ CONFIG_NO_HZ=y
+ CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
++CONFIG_EXPERIMENTAL=y
+ CONFIG_LOCALVERSION="-fuloong2e"
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SYSVIPC=y
+diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig
+index 55438fc9991e..db03ef4f737d 100644
+--- a/arch/mips/configs/gpr_defconfig
++++ b/arch/mips/configs/gpr_defconfig
+@@ -1,7 +1,8 @@
+ CONFIG_MIPS_ALCHEMY=y
+ CONFIG_MIPS_GPR=y
+ CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
++CONFIG_EXPERIMENTAL=y
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SYSVIPC=y
+ CONFIG_POSIX_MQUEUE=y
+diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
+index 7ddfb4ef9479..93e439ad3fce 100644
+--- a/arch/mips/configs/ip22_defconfig
++++ b/arch/mips/configs/ip22_defconfig
+@@ -4,7 +4,8 @@ CONFIG_CPU_R5000=y
+ CONFIG_NO_HZ=y
+ CONFIG_HIGH_RES_TIMERS=y
+ CONFIG_HZ_1000=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
++CONFIG_EXPERIMENTAL=y
+ CONFIG_SYSVIPC=y
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig
+index d0a4c2cfacf8..6f0600e99c25 100644
+--- a/arch/mips/configs/ip28_defconfig
++++ b/arch/mips/configs/ip28_defconfig
+@@ -1,6 +1,7 @@
+ CONFIG_SGI_IP28=y
+ CONFIG_ARC_CONSOLE=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
++CONFIG_EXPERIMENTAL=y
+ CONFIG_SYSVIPC=y
+ CONFIG_IKCONFIG=y
+ CONFIG_IKCONFIG_PROC=y
+diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
+index 9ad1c94376c8..1d62ce7ff5dc 100644
+--- a/arch/mips/configs/jazz_defconfig
++++ b/arch/mips/configs/jazz_defconfig
+@@ -1,6 +1,7 @@
+ CONFIG_MACH_JAZZ=y
+ CONFIG_OLIVETTI_M700=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
++CONFIG_EXPERIMENTAL=y
+ CONFIG_SYSVIPC=y
+ CONFIG_POSIX_MQUEUE=y
+ CONFIG_BSD_PROCESS_ACCT=y
+diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
+index c3d0d0a6e044..aa3426d5f7d7 100644
+--- a/arch/mips/configs/mtx1_defconfig
++++ b/arch/mips/configs/mtx1_defconfig
+@@ -1,6 +1,7 @@
+ CONFIG_MIPS_ALCHEMY=y
+ CONFIG_MIPS_MTX1=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
++CONFIG_EXPERIMENTAL=y
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SYSVIPC=y
+ CONFIG_POSIX_MQUEUE=y
+diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig
+index c4477a4d40c1..95caf0af665f 100644
+--- a/arch/mips/configs/nlm_xlr_defconfig
++++ b/arch/mips/configs/nlm_xlr_defconfig
+@@ -5,7 +5,7 @@ CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+ CONFIG_SMP=y
+ CONFIG_NO_HZ=y
+ CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_KEXEC=y
+ CONFIG_CROSS_COMPILE=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+diff --git a/arch/mips/configs/pic32mzda_defconfig b/arch/mips/configs/pic32mzda_defconfig
+index 41190c2036e6..3728897ab2b2 100644
+--- a/arch/mips/configs/pic32mzda_defconfig
++++ b/arch/mips/configs/pic32mzda_defconfig
+@@ -1,7 +1,7 @@
+ CONFIG_MACH_PIC32=y
+ CONFIG_DTB_PIC32_MZDA_SK=y
+ CONFIG_HZ_100=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ # CONFIG_SECCOMP is not set
+ CONFIG_SYSVIPC=y
+ CONFIG_NO_HZ=y
+diff --git a/arch/mips/configs/pistachio_defconfig b/arch/mips/configs/pistachio_defconfig
+index b22a3cf149b6..cfffca3d37f4 100644
+--- a/arch/mips/configs/pistachio_defconfig
++++ b/arch/mips/configs/pistachio_defconfig
+@@ -5,7 +5,7 @@ CONFIG_MIPS_CPS=y
+ CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+ CONFIG_ZSMALLOC=y
+ CONFIG_NR_CPUS=4
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_DEFAULT_HOSTNAME="localhost"
+ CONFIG_SYSVIPC=y
+diff --git a/arch/mips/configs/pnx8335_stb225_defconfig b/arch/mips/configs/pnx8335_stb225_defconfig
+index e73cdb08fc6e..dc62fa8d6065 100644
+--- a/arch/mips/configs/pnx8335_stb225_defconfig
++++ b/arch/mips/configs/pnx8335_stb225_defconfig
+@@ -3,7 +3,7 @@ CONFIG_CPU_LITTLE_ENDIAN=y
+ CONFIG_NO_HZ=y
+ CONFIG_HIGH_RES_TIMERS=y
+ CONFIG_HZ_128=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ # CONFIG_SECCOMP is not set
+ # CONFIG_LOCALVERSION_AUTO is not set
+ # CONFIG_SWAP is not set
+diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
+index 5f71aa598b06..767f1999ead0 100644
+--- a/arch/mips/configs/rm200_defconfig
++++ b/arch/mips/configs/rm200_defconfig
+@@ -2,7 +2,8 @@ CONFIG_SNI_RM=y
+ CONFIG_CPU_LITTLE_ENDIAN=y
+ CONFIG_ARC_CONSOLE=y
+ CONFIG_HZ_1000=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
++CONFIG_EXPERIMENTAL=y
+ CONFIG_SYSVIPC=y
+ CONFIG_POSIX_MQUEUE=y
+ CONFIG_BSD_PROCESS_ACCT=y
+diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
+index ccc109761f44..a6a5b0b7a9c9 100644
+--- a/arch/parisc/configs/712_defconfig
++++ b/arch/parisc/configs/712_defconfig
+@@ -13,7 +13,7 @@ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+ CONFIG_MODULE_FORCE_UNLOAD=y
+ CONFIG_PA7100LC=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_GSC_LASI=y
+ # CONFIG_PDC_CHASSIS is not set
+ CONFIG_BINFMT_MISC=m
+diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
+index 8d41a73bd71b..b8e0a6662ff9 100644
+--- a/arch/parisc/configs/c3000_defconfig
++++ b/arch/parisc/configs/c3000_defconfig
+@@ -13,7 +13,7 @@ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+ CONFIG_MODULE_FORCE_UNLOAD=y
+ CONFIG_PA8X00=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ # CONFIG_GSC is not set
+ CONFIG_PCI=y
+ CONFIG_PCI_LBA=y
+diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/default_defconfig
+index 52c9050a7c5c..8d86d2e989f4 100644
+--- a/arch/parisc/configs/default_defconfig
++++ b/arch/parisc/configs/default_defconfig
+@@ -14,7 +14,7 @@ CONFIG_MODULE_UNLOAD=y
+ CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_BLK_DEV_BSG is not set
+ CONFIG_PA7100LC=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_IOMMU_CCIO=y
+ CONFIG_GSC_LASI=y
+ CONFIG_GSC_WAX=y
+diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
+new file mode 100644
+index 000000000000..04fee07ea6c5
+--- /dev/null
++++ b/arch/powerpc/configs/c2k_defconfig
+@@ -0,0 +1,389 @@
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_AUDIT=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++CONFIG_PARTITION_ADVANCED=y
++CONFIG_OSF_PARTITION=y
++CONFIG_MAC_PARTITION=y
++CONFIG_BSD_DISKLABEL=y
++CONFIG_MINIX_SUBPARTITION=y
++CONFIG_SOLARIS_X86_PARTITION=y
++CONFIG_UNIXWARE_DISKLABEL=y
++CONFIG_SGI_PARTITION=y
++CONFIG_SUN_PARTITION=y
++# CONFIG_PPC_CHRP is not set
++# CONFIG_PPC_PMAC is not set
++CONFIG_EMBEDDED6xx=y
++CONFIG_PPC_C2K=y
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=m
++CONFIG_CPU_FREQ_GOV_ONDEMAND=m
++CONFIG_GEN_RTC=y
++CONFIG_HIGHMEM=y
++CONFIG_PREEMPT=y
++CONFIG_BINFMT_MISC=y
++CONFIG_PM=y
++CONFIG_PCI_MSI=y
++CONFIG_HOTPLUG_PCI=y
++CONFIG_HOTPLUG_PCI_SHPC=m
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_XFRM_USER=y
++CONFIG_NET_KEY=m
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_IP_MULTIPLE_TABLES=y
++CONFIG_IP_ROUTE_MULTIPATH=y
++CONFIG_IP_ROUTE_VERBOSE=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_NET_IPIP=m
++CONFIG_IP_MROUTE=y
++CONFIG_IP_PIMSM_V1=y
++CONFIG_IP_PIMSM_V2=y
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++CONFIG_INET_IPCOMP=m
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++CONFIG_IPV6_TUNNEL=m
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_MATCH_ECN=m
++CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_ECN=m
++CONFIG_IP_NF_RAW=m
++CONFIG_IP_NF_ARPTABLES=m
++CONFIG_IP_NF_ARPFILTER=m
++CONFIG_IP_NF_ARP_MANGLE=m
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_HL=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_MANGLE=m
++CONFIG_IP6_NF_RAW=m
++CONFIG_BRIDGE_NF_EBTABLES=m
++CONFIG_BRIDGE_EBT_BROUTE=m
++CONFIG_BRIDGE_EBT_T_FILTER=m
++CONFIG_BRIDGE_EBT_T_NAT=m
++CONFIG_BRIDGE_EBT_802_3=m
++CONFIG_BRIDGE_EBT_AMONG=m
++CONFIG_BRIDGE_EBT_ARP=m
++CONFIG_BRIDGE_EBT_IP=m
++CONFIG_BRIDGE_EBT_LIMIT=m
++CONFIG_BRIDGE_EBT_MARK=m
++CONFIG_BRIDGE_EBT_PKTTYPE=m
++CONFIG_BRIDGE_EBT_STP=m
++CONFIG_BRIDGE_EBT_VLAN=m
++CONFIG_BRIDGE_EBT_ARPREPLY=m
++CONFIG_BRIDGE_EBT_DNAT=m
++CONFIG_BRIDGE_EBT_MARK_T=m
++CONFIG_BRIDGE_EBT_REDIRECT=m
++CONFIG_BRIDGE_EBT_SNAT=m
++CONFIG_BRIDGE_EBT_LOG=m
++CONFIG_IP_SCTP=m
++CONFIG_ATM=m
++CONFIG_ATM_CLIP=m
++CONFIG_ATM_LANE=m
++CONFIG_ATM_BR2684=m
++CONFIG_BRIDGE=m
++CONFIG_VLAN_8021Q=m
++CONFIG_NET_SCHED=y
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++CONFIG_NET_SCH_ATM=m
++CONFIG_NET_SCH_PRIO=m
++CONFIG_NET_SCH_RED=m
++CONFIG_NET_SCH_SFQ=m
++CONFIG_NET_SCH_TEQL=m
++CONFIG_NET_SCH_TBF=m
++CONFIG_NET_SCH_GRED=m
++CONFIG_NET_SCH_DSMARK=m
++CONFIG_NET_SCH_NETEM=m
++CONFIG_NET_CLS_TCINDEX=m
++CONFIG_NET_CLS_ROUTE4=m
++CONFIG_NET_CLS_FW=m
++CONFIG_NET_CLS_U32=m
++CONFIG_CLS_U32_PERF=y
++CONFIG_NET_CLS_RSVP=m
++CONFIG_NET_CLS_RSVP6=m
++CONFIG_NET_CLS_IND=y
++CONFIG_BT=m
++CONFIG_BT_RFCOMM=m
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=m
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++CONFIG_BT_HIDP=m
++CONFIG_BT_HCIUART=m
++CONFIG_BT_HCIUART_H4=y
++CONFIG_BT_HCIUART_BCSP=y
++CONFIG_BT_HCIBCM203X=m
++CONFIG_BT_HCIBFUSB=m
++CONFIG_BT_HCIVHCI=m
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_MTD=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_AMDSTD=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_PHYSMAP_OF=y
++CONFIG_BLK_DEV_LOOP=m
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_SIZE=16384
++CONFIG_SCSI=m
++CONFIG_BLK_DEV_SD=m
++CONFIG_CHR_DEV_ST=m
++CONFIG_CHR_DEV_OSST=m
++CONFIG_BLK_DEV_SR=m
++CONFIG_BLK_DEV_SR_VENDOR=y
++CONFIG_CHR_DEV_SG=m
++CONFIG_SCSI_CONSTANTS=y
++CONFIG_SCSI_LOGGING=y
++CONFIG_SCSI_ISCSI_ATTRS=m
++CONFIG_BLK_DEV_3W_XXXX_RAID=m
++CONFIG_SCSI_3W_9XXX=m
++CONFIG_SCSI_ACARD=m
++CONFIG_SCSI_AACRAID=m
++CONFIG_SCSI_AIC7XXX=m
++CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
++CONFIG_AIC7XXX_RESET_DELAY_MS=15000
++# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
++# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
++CONFIG_SCSI_AIC79XX=m
++CONFIG_AIC79XX_CMDS_PER_DEVICE=4
++CONFIG_AIC79XX_RESET_DELAY_MS=15000
++# CONFIG_AIC79XX_DEBUG_ENABLE is not set
++# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
++CONFIG_SCSI_ARCMSR=m
++CONFIG_MEGARAID_NEWGEN=y
++CONFIG_MEGARAID_MM=m
++CONFIG_MEGARAID_MAILBOX=m
++CONFIG_MEGARAID_SAS=m
++CONFIG_SCSI_GDTH=m
++CONFIG_SCSI_IPS=m
++CONFIG_SCSI_INITIO=m
++CONFIG_SCSI_SYM53C8XX_2=m
++CONFIG_SCSI_QLOGIC_1280=m
++CONFIG_NETDEVICES=y
++CONFIG_BONDING=m
++CONFIG_DUMMY=m
++CONFIG_NETCONSOLE=m
++CONFIG_TUN=m
++# CONFIG_ATM_DRIVERS is not set
++CONFIG_MV643XX_ETH=y
++CONFIG_VITESSE_PHY=y
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_UINPUT=m
++# CONFIG_SERIO is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_SERIAL_NONSTANDARD=y
++CONFIG_SERIAL_MPSC=y
++CONFIG_SERIAL_MPSC_CONSOLE=y
++CONFIG_NVRAM=m
++CONFIG_RAW_DRIVER=y
++CONFIG_MAX_RAW_DEVS=8192
++CONFIG_I2C=m
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_MV64XXX=m
++CONFIG_HWMON=m
++CONFIG_SENSORS_ADM1021=m
++CONFIG_SENSORS_ADM1025=m
++CONFIG_SENSORS_ADM1026=m
++CONFIG_SENSORS_ADM1031=m
++CONFIG_SENSORS_DS1621=m
++CONFIG_SENSORS_GL518SM=m
++CONFIG_SENSORS_MAX1619=m
++CONFIG_SENSORS_LM75=m
++CONFIG_SENSORS_LM77=m
++CONFIG_SENSORS_LM78=m
++CONFIG_SENSORS_LM80=m
++CONFIG_SENSORS_LM83=m
++CONFIG_SENSORS_LM85=m
++CONFIG_SENSORS_LM87=m
++CONFIG_SENSORS_LM90=m
++CONFIG_SENSORS_PCF8591=m
++CONFIG_SENSORS_VIA686A=m
++CONFIG_SENSORS_W83781D=m
++CONFIG_SENSORS_W83L785TS=m
++CONFIG_WATCHDOG=y
++CONFIG_SOFT_WATCHDOG=m
++CONFIG_PCIPCWATCHDOG=m
++CONFIG_WDTPCI=m
++CONFIG_USBPCWATCHDOG=m
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_USB=m
++CONFIG_USB_MON=m
++CONFIG_USB_EHCI_HCD=m
++CONFIG_USB_EHCI_ROOT_HUB_TT=y
++CONFIG_USB_OHCI_HCD=m
++CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
++CONFIG_USB_UHCI_HCD=m
++CONFIG_USB_ACM=m
++CONFIG_USB_PRINTER=m
++CONFIG_USB_STORAGE=m
++CONFIG_USB_STORAGE_DATAFAB=m
++CONFIG_USB_STORAGE_FREECOM=m
++CONFIG_USB_STORAGE_ISD200=m
++CONFIG_USB_STORAGE_SDDR09=m
++CONFIG_USB_STORAGE_SDDR55=m
++CONFIG_USB_STORAGE_JUMPSHOT=m
++CONFIG_USB_MDC800=m
++CONFIG_USB_MICROTEK=m
++CONFIG_USB_SERIAL=m
++CONFIG_USB_SERIAL_GENERIC=y
++CONFIG_USB_SERIAL_BELKIN=m
++CONFIG_USB_SERIAL_WHITEHEAT=m
++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
++CONFIG_USB_SERIAL_EMPEG=m
++CONFIG_USB_SERIAL_FTDI_SIO=m
++CONFIG_USB_SERIAL_VISOR=m
++CONFIG_USB_SERIAL_IPAQ=m
++CONFIG_USB_SERIAL_IR=m
++CONFIG_USB_SERIAL_EDGEPORT=m
++CONFIG_USB_SERIAL_EDGEPORT_TI=m
++CONFIG_USB_SERIAL_KEYSPAN_PDA=m
++CONFIG_USB_SERIAL_KEYSPAN=m
++CONFIG_USB_SERIAL_KLSI=m
++CONFIG_USB_SERIAL_KOBIL_SCT=m
++CONFIG_USB_SERIAL_MCT_U232=m
++CONFIG_USB_SERIAL_PL2303=m
++CONFIG_USB_SERIAL_SAFE=m
++CONFIG_USB_SERIAL_SAFE_PADDED=y
++CONFIG_USB_SERIAL_CYBERJACK=m
++CONFIG_USB_SERIAL_XIRCOM=m
++CONFIG_USB_SERIAL_OMNINET=m
++CONFIG_USB_EMI62=m
++CONFIG_USB_RIO500=m
++CONFIG_USB_LEGOTOWER=m
++CONFIG_USB_LCD=m
++CONFIG_USB_LED=m
++CONFIG_USB_TEST=m
++CONFIG_USB_ATM=m
++CONFIG_USB_SPEEDTOUCH=m
++CONFIG_INFINIBAND=m
++CONFIG_INFINIBAND_USER_MAD=m
++CONFIG_INFINIBAND_USER_ACCESS=m
++CONFIG_INFINIBAND_MTHCA=m
++CONFIG_INFINIBAND_IPOIB=m
++CONFIG_INFINIBAND_IPOIB_CM=y
++CONFIG_INFINIBAND_SRP=m
++CONFIG_DMADEVICES=y
++CONFIG_EXT4_FS=m
++CONFIG_EXT4_FS_POSIX_ACL=y
++CONFIG_EXT4_FS_SECURITY=y
++CONFIG_QUOTA=y
++CONFIG_QFMT_V2=y
++CONFIG_AUTOFS4_FS=m
++CONFIG_UDF_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
++CONFIG_PROC_KCORE=y
++CONFIG_TMPFS=y
++CONFIG_HFS_FS=m
++CONFIG_HFSPLUS_FS=m
++CONFIG_JFFS2_FS=y
++CONFIG_CRAMFS=m
++CONFIG_VXFS_FS=m
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=y
++CONFIG_ROOT_NFS=y
++CONFIG_CIFS=m
++CONFIG_CIFS_XATTR=y
++CONFIG_CIFS_POSIX=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="utf8"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=m
++CONFIG_NLS_CODEPAGE_775=m
++CONFIG_NLS_CODEPAGE_850=m
++CONFIG_NLS_CODEPAGE_852=m
++CONFIG_NLS_CODEPAGE_855=m
++CONFIG_NLS_CODEPAGE_857=m
++CONFIG_NLS_CODEPAGE_860=m
++CONFIG_NLS_CODEPAGE_861=m
++CONFIG_NLS_CODEPAGE_862=m
++CONFIG_NLS_CODEPAGE_863=m
++CONFIG_NLS_CODEPAGE_864=m
++CONFIG_NLS_CODEPAGE_865=m
++CONFIG_NLS_CODEPAGE_866=m
++CONFIG_NLS_CODEPAGE_869=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++CONFIG_NLS_CODEPAGE_932=m
++CONFIG_NLS_CODEPAGE_949=m
++CONFIG_NLS_CODEPAGE_874=m
++CONFIG_NLS_ISO8859_8=m
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_ISO8859_2=m
++CONFIG_NLS_ISO8859_3=m
++CONFIG_NLS_ISO8859_4=m
++CONFIG_NLS_ISO8859_5=m
++CONFIG_NLS_ISO8859_6=m
++CONFIG_NLS_ISO8859_7=m
++CONFIG_NLS_ISO8859_9=m
++CONFIG_NLS_ISO8859_13=m
++CONFIG_NLS_ISO8859_14=m
++CONFIG_NLS_ISO8859_15=m
++CONFIG_NLS_KOI8_R=m
++CONFIG_NLS_KOI8_U=m
++CONFIG_CRC_CCITT=m
++CONFIG_CRC_T10DIF=m
++CONFIG_DEBUG_INFO=y
++CONFIG_MAGIC_SYSRQ=y
++CONFIG_DEBUG_KERNEL=y
++CONFIG_DEBUG_STACK_USAGE=y
++CONFIG_DEBUG_HIGHMEM=y
++CONFIG_DEBUG_STACKOVERFLOW=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_DEBUG_SPINLOCK=y
++CONFIG_BOOTX_TEXT=y
++CONFIG_PPC_EARLY_DEBUG=y
++CONFIG_SECURITY=y
++CONFIG_SECURITY_NETWORK=y
++CONFIG_SECURITY_SELINUX=y
++CONFIG_SECURITY_SELINUX_BOOTPARAM=y
++CONFIG_SECURITY_SELINUX_DISABLE=y
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_MICHAEL_MIC=m
++CONFIG_CRYPTO_SHA1=y
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_WP512=m
++CONFIG_CRYPTO_BLOWFISH=m
++CONFIG_CRYPTO_CAST6=m
++CONFIG_CRYPTO_KHAZAD=m
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_TWOFISH=m
+diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
+index 7ee736f20774..8663c0043a56 100644
+--- a/arch/powerpc/configs/ppc6xx_defconfig
++++ b/arch/powerpc/configs/ppc6xx_defconfig
+@@ -74,7 +74,7 @@ CONFIG_QE_GPIO=y
+ CONFIG_MCU_MPC8349EMITX=y
+ CONFIG_HIGHMEM=y
+ CONFIG_HZ_1000=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_BINFMT_MISC=y
+ CONFIG_HIBERNATION=y
+ CONFIG_PM_DEBUG=y
+diff --git a/arch/score/configs/spct6600_defconfig b/arch/score/configs/spct6600_defconfig
+new file mode 100644
+index 000000000000..46434ca1fa10
+--- /dev/null
++++ b/arch/score/configs/spct6600_defconfig
+@@ -0,0 +1,84 @@
++CONFIG_HZ_100=y
++CONFIG_PREEMPT=y
++CONFIG_EXPERIMENTAL=y
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_LOG_BUF_SHIFT=12
++CONFIG_SYSFS_DEPRECATED_V2=y
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_EXPERT=y
++# CONFIG_KALLSYMS is not set
++# CONFIG_HOTPLUG is not set
++CONFIG_SLAB=y
++CONFIG_MODULES=y
++CONFIG_MODULE_FORCE_LOAD=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_BLK_DEV_BSG is not set
++CONFIG_BINFMT_MISC=y
++CONFIG_NET=y
++CONFIG_UNIX=y
++CONFIG_NET_KEY=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_ARPD=y
++# CONFIG_INET_LRO is not set
++# CONFIG_IPV6 is not set
++# CONFIG_STANDALONE is not set
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_CRYPTOLOOP=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=1
++# CONFIG_MISC_DEVICES is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++CONFIG_SERIAL_NONSTANDARD=y
++CONFIG_STALDRV=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_RAW_DRIVER=y
++CONFIG_MAX_RAW_DEVS=8192
++# CONFIG_HWMON is not set
++# CONFIG_VGA_CONSOLE is not set
++# CONFIG_HID_SUPPORT is not set
++# CONFIG_USB_SUPPORT is not set
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++CONFIG_EXT2_FS_POSIX_ACL=y
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
++CONFIG_EXT3_FS_POSIX_ACL=y
++CONFIG_AUTOFS_FS=y
++CONFIG_AUTOFS4_FS=y
++CONFIG_PROC_KCORE=y
++# CONFIG_PROC_PAGE_MONITOR is not set
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=y
++CONFIG_NFSD=y
++CONFIG_NFSD_V3_ACL=y
++CONFIG_NFSD_V4=y
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++CONFIG_SECURITY=y
++CONFIG_SECURITY_NETWORK=y
++CONFIG_CRYPTO_NULL=y
++CONFIG_CRYPTO_CRYPTD=y
++CONFIG_CRYPTO_SEQIV=y
++CONFIG_CRYPTO_MD4=y
++CONFIG_CRYPTO_MICHAEL_MIC=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_CRYPTO_HW is not set
++CONFIG_CRC_CCITT=y
++CONFIG_CRC16=y
++CONFIG_LIBCRC32C=y
+diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
+index 5a1097641247..eb5fbf554e7f 100644
+--- a/arch/sh/configs/se7712_defconfig
++++ b/arch/sh/configs/se7712_defconfig
+@@ -23,7 +23,7 @@ CONFIG_FLATMEM_MANUAL=y
+ CONFIG_SH_SOLUTION_ENGINE=y
+ CONFIG_SH_PCLK_FREQ=66666666
+ CONFIG_HEARTBEAT=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_CMDLINE_OVERWRITE=y
+ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
+ CONFIG_NET=y
+diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
+index 9c0ef13bee10..cbaa65c8bf9e 100644
+--- a/arch/sh/configs/se7721_defconfig
++++ b/arch/sh/configs/se7721_defconfig
+@@ -23,7 +23,7 @@ CONFIG_FLATMEM_MANUAL=y
+ CONFIG_SH_7721_SOLUTION_ENGINE=y
+ CONFIG_SH_PCLK_FREQ=33333333
+ CONFIG_HEARTBEAT=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_CMDLINE_OVERWRITE=y
+ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
+ CONFIG_NET=y
+diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
+index ceb48e9b70f4..1a69eda6610c 100644
+--- a/arch/sh/configs/titan_defconfig
++++ b/arch/sh/configs/titan_defconfig
+@@ -20,7 +20,7 @@ CONFIG_SH_TITAN=y
+ CONFIG_SH_PCLK_FREQ=30000000
+ CONFIG_SH_DMA=y
+ CONFIG_SH_DMA_API=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_CMDLINE_OVERWRITE=y
+ CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
+ CONFIG_PCI=y
+diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
+index 4d4e1cc6402f..04bea1d28ba7 100644
+--- a/arch/sparc/configs/sparc64_defconfig
++++ b/arch/sparc/configs/sparc64_defconfig
+@@ -22,7 +22,7 @@ CONFIG_NO_HZ=y
+ CONFIG_HIGH_RES_TIMERS=y
+ CONFIG_NUMA=y
+ CONFIG_DEFAULT_MMAP_MIN_ADDR=8192
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_SUN_LDOMS=y
+ CONFIG_PCI=y
+ CONFIG_PCI_MSI=y
+diff --git a/arch/tile/configs/tilegx_defconfig b/arch/tile/configs/tilegx_defconfig
+new file mode 100644
+index 000000000000..939c63ba7e6e
+--- /dev/null
++++ b/arch/tile/configs/tilegx_defconfig
+@@ -0,0 +1,411 @@
++CONFIG_TILEGX=y
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_FHANDLE=y
++CONFIG_AUDIT=y
++CONFIG_NO_HZ=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++CONFIG_TASKSTATS=y
++CONFIG_TASK_DELAY_ACCT=y
++CONFIG_TASK_XACCT=y
++CONFIG_TASK_IO_ACCOUNTING=y
++CONFIG_LOG_BUF_SHIFT=19
++CONFIG_CGROUPS=y
++CONFIG_CGROUP_DEBUG=y
++CONFIG_CGROUP_DEVICE=y
++CONFIG_CPUSETS=y
++CONFIG_CGROUP_CPUACCT=y
++CONFIG_CGROUP_SCHED=y
++CONFIG_RT_GROUP_SCHED=y
++CONFIG_BLK_CGROUP=y
++CONFIG_NAMESPACES=y
++CONFIG_RELAY=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_RD_XZ=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_EMBEDDED=y
++# CONFIG_COMPAT_BRK is not set
++CONFIG_PROFILING=y
++CONFIG_KPROBES=y
++CONFIG_MODULES=y
++CONFIG_MODULE_FORCE_LOAD=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_BLK_DEV_INTEGRITY=y
++CONFIG_PARTITION_ADVANCED=y
++CONFIG_OSF_PARTITION=y
++CONFIG_AMIGA_PARTITION=y
++CONFIG_MAC_PARTITION=y
++CONFIG_BSD_DISKLABEL=y
++CONFIG_MINIX_SUBPARTITION=y
++CONFIG_SOLARIS_X86_PARTITION=y
++CONFIG_UNIXWARE_DISKLABEL=y
++CONFIG_SGI_PARTITION=y
++CONFIG_SUN_PARTITION=y
++CONFIG_KARMA_PARTITION=y
++CONFIG_CFQ_GROUP_IOSCHED=y
++CONFIG_NR_CPUS=100
++CONFIG_HZ_100=y
++# CONFIG_COMPACTION is not set
++CONFIG_PREEMPT=y
++CONFIG_TILE_PCI_IO=y
++CONFIG_PCI_DEBUG=y
++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
++CONFIG_BINFMT_MISC=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_XFRM_USER=y
++CONFIG_XFRM_SUB_POLICY=y
++CONFIG_XFRM_STATISTICS=y
++CONFIG_NET_KEY=m
++CONFIG_NET_KEY_MIGRATE=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_IP_MULTIPLE_TABLES=y
++CONFIG_IP_ROUTE_MULTIPATH=y
++CONFIG_IP_ROUTE_VERBOSE=y
++CONFIG_NET_IPIP=m
++CONFIG_IP_MROUTE=y
++CONFIG_IP_PIMSM_V1=y
++CONFIG_IP_PIMSM_V2=y
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++CONFIG_INET_IPCOMP=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++CONFIG_INET_DIAG=m
++CONFIG_TCP_CONG_ADVANCED=y
++CONFIG_TCP_CONG_HSTCP=m
++CONFIG_TCP_CONG_HYBLA=m
++CONFIG_TCP_CONG_SCALABLE=m
++CONFIG_TCP_CONG_LP=m
++CONFIG_TCP_CONG_VENO=m
++CONFIG_TCP_CONG_YEAH=m
++CONFIG_TCP_CONG_ILLINOIS=m
++CONFIG_TCP_MD5SIG=y
++CONFIG_IPV6=y
++CONFIG_IPV6_ROUTER_PREF=y
++CONFIG_IPV6_ROUTE_INFO=y
++CONFIG_IPV6_OPTIMISTIC_DAD=y
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++CONFIG_IPV6_MIP6=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_TUNNEL=m
++CONFIG_IPV6_MULTIPLE_TABLES=y
++CONFIG_IPV6_MROUTE=y
++CONFIG_IPV6_PIMSM_V2=y
++CONFIG_NETLABEL=y
++CONFIG_RDS=m
++CONFIG_RDS_TCP=m
++CONFIG_BRIDGE=m
++CONFIG_VLAN_8021Q=m
++CONFIG_VLAN_8021Q_GVRP=y
++CONFIG_PHONET=m
++CONFIG_NET_SCHED=y
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++CONFIG_NET_SCH_PRIO=m
++CONFIG_NET_SCH_MULTIQ=m
++CONFIG_NET_SCH_RED=m
++CONFIG_NET_SCH_SFQ=m
++CONFIG_NET_SCH_TEQL=m
++CONFIG_NET_SCH_TBF=m
++CONFIG_NET_SCH_GRED=m
++CONFIG_NET_SCH_DSMARK=m
++CONFIG_NET_SCH_NETEM=m
++CONFIG_NET_SCH_DRR=m
++CONFIG_NET_SCH_INGRESS=m
++CONFIG_NET_CLS_BASIC=m
++CONFIG_NET_CLS_TCINDEX=m
++CONFIG_NET_CLS_ROUTE4=m
++CONFIG_NET_CLS_FW=m
++CONFIG_NET_CLS_U32=m
++CONFIG_CLS_U32_PERF=y
++CONFIG_CLS_U32_MARK=y
++CONFIG_NET_CLS_RSVP=m
++CONFIG_NET_CLS_RSVP6=m
++CONFIG_NET_CLS_FLOW=m
++CONFIG_NET_CLS_CGROUP=y
++CONFIG_NET_EMATCH=y
++CONFIG_NET_EMATCH_CMP=m
++CONFIG_NET_EMATCH_NBYTE=m
++CONFIG_NET_EMATCH_U32=m
++CONFIG_NET_EMATCH_META=m
++CONFIG_NET_EMATCH_TEXT=m
++CONFIG_NET_CLS_ACT=y
++CONFIG_NET_ACT_POLICE=m
++CONFIG_NET_ACT_GACT=m
++CONFIG_GACT_PROB=y
++CONFIG_NET_ACT_MIRRED=m
++CONFIG_NET_ACT_NAT=m
++CONFIG_NET_ACT_PEDIT=m
++CONFIG_NET_ACT_SIMP=m
++CONFIG_NET_ACT_SKBEDIT=m
++CONFIG_NET_CLS_IND=y
++CONFIG_DCB=y
++CONFIG_DNS_RESOLVER=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_CONNECTOR=y
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++CONFIG_BLK_DEV_SX8=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_SIZE=16384
++CONFIG_ATA_OVER_ETH=m
++CONFIG_RAID_ATTRS=m
++CONFIG_BLK_DEV_SD=y
++CONFIG_SCSI_CONSTANTS=y
++CONFIG_SCSI_LOGGING=y
++CONFIG_SCSI_SAS_ATA=y
++CONFIG_ISCSI_TCP=m
++CONFIG_SCSI_MVSAS=y
++# CONFIG_SCSI_MVSAS_DEBUG is not set
++CONFIG_SCSI_MVSAS_TASKLET=y
++CONFIG_ATA=y
++CONFIG_SATA_AHCI=y
++CONFIG_SATA_SIL24=y
++# CONFIG_ATA_SFF is not set
++CONFIG_MD=y
++CONFIG_BLK_DEV_MD=y
++CONFIG_MD_LINEAR=m
++CONFIG_MD_RAID0=m
++CONFIG_MD_RAID1=m
++CONFIG_MD_RAID10=m
++CONFIG_MD_RAID456=m
++CONFIG_MD_FAULTY=m
++CONFIG_BLK_DEV_DM=m
++CONFIG_DM_DEBUG=y
++CONFIG_DM_CRYPT=m
++CONFIG_DM_SNAPSHOT=m
++CONFIG_DM_MIRROR=m
++CONFIG_DM_LOG_USERSPACE=m
++CONFIG_DM_ZERO=m
++CONFIG_DM_MULTIPATH=m
++CONFIG_DM_MULTIPATH_QL=m
++CONFIG_DM_MULTIPATH_ST=m
++CONFIG_DM_DELAY=m
++CONFIG_DM_UEVENT=y
++CONFIG_TARGET_CORE=m
++CONFIG_TCM_IBLOCK=m
++CONFIG_TCM_FILEIO=m
++CONFIG_TCM_PSCSI=m
++CONFIG_LOOPBACK_TARGET=m
++CONFIG_ISCSI_TARGET=m
++CONFIG_FUSION=y
++CONFIG_FUSION_SAS=y
++CONFIG_NETDEVICES=y
++CONFIG_BONDING=m
++CONFIG_DUMMY=m
++CONFIG_IFB=m
++CONFIG_MACVLAN=m
++CONFIG_MACVTAP=m
++CONFIG_NETCONSOLE=m
++CONFIG_NETCONSOLE_DYNAMIC=y
++CONFIG_TUN=y
++CONFIG_VETH=m
++CONFIG_NET_DSA_MV88E6060=y
++CONFIG_NET_DSA_MV88E6XXX=y
++CONFIG_SKY2=y
++CONFIG_PTP_1588_CLOCK_TILEGX=y
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_SERIAL_TILEGX=y
++CONFIG_HW_RANDOM=y
++CONFIG_HW_RANDOM_TIMERIOMEM=m
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++# CONFIG_VGA_ARB is not set
++CONFIG_DRM=m
++CONFIG_DRM_TDFX=m
++CONFIG_DRM_R128=m
++CONFIG_DRM_MGA=m
++CONFIG_DRM_VIA=m
++CONFIG_DRM_SAVAGE=m
++CONFIG_USB=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_STORAGE=y
++CONFIG_EDAC=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_TILE=y
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++CONFIG_EXT2_FS_POSIX_ACL=y
++CONFIG_EXT2_FS_SECURITY=y
++CONFIG_EXT2_FS_XIP=y
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_POSIX_ACL=y
++CONFIG_EXT3_FS_SECURITY=y
++CONFIG_EXT4_FS=y
++CONFIG_EXT4_FS_POSIX_ACL=y
++CONFIG_EXT4_FS_SECURITY=y
++CONFIG_XFS_FS=y
++CONFIG_XFS_QUOTA=y
++CONFIG_XFS_POSIX_ACL=y
++CONFIG_GFS2_FS=m
++CONFIG_GFS2_FS_LOCKING_DLM=y
++CONFIG_BTRFS_FS=m
++CONFIG_BTRFS_FS_POSIX_ACL=y
++CONFIG_QUOTA=y
++CONFIG_QUOTA_NETLINK_INTERFACE=y
++# CONFIG_PRINT_QUOTA_WARNING is not set
++CONFIG_QFMT_V2=y
++CONFIG_AUTOFS4_FS=m
++CONFIG_FUSE_FS=y
++CONFIG_CUSE=m
++CONFIG_FSCACHE=m
++CONFIG_FSCACHE_STATS=y
++CONFIG_CACHEFILES=m
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_UDF_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
++CONFIG_PROC_KCORE=y
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++CONFIG_HUGETLBFS=y
++CONFIG_ECRYPT_FS=m
++CONFIG_CRAMFS=m
++CONFIG_SQUASHFS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=m
++CONFIG_NFS_V4_1=y
++CONFIG_NFS_FSCACHE=y
++CONFIG_NFSD=m
++CONFIG_NFSD_V3_ACL=y
++CONFIG_NFSD_V4=y
++CONFIG_CIFS=m
++CONFIG_CIFS_STATS=y
++CONFIG_CIFS_WEAK_PW_HASH=y
++CONFIG_CIFS_UPCALL=y
++CONFIG_CIFS_XATTR=y
++CONFIG_CIFS_POSIX=y
++CONFIG_CIFS_DFS_UPCALL=y
++CONFIG_CIFS_FSCACHE=y
++CONFIG_NLS_DEFAULT="utf8"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=m
++CONFIG_NLS_CODEPAGE_775=m
++CONFIG_NLS_CODEPAGE_850=m
++CONFIG_NLS_CODEPAGE_852=m
++CONFIG_NLS_CODEPAGE_855=m
++CONFIG_NLS_CODEPAGE_857=m
++CONFIG_NLS_CODEPAGE_860=m
++CONFIG_NLS_CODEPAGE_861=m
++CONFIG_NLS_CODEPAGE_862=m
++CONFIG_NLS_CODEPAGE_863=m
++CONFIG_NLS_CODEPAGE_864=m
++CONFIG_NLS_CODEPAGE_865=m
++CONFIG_NLS_CODEPAGE_866=m
++CONFIG_NLS_CODEPAGE_869=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++CONFIG_NLS_CODEPAGE_932=m
++CONFIG_NLS_CODEPAGE_949=m
++CONFIG_NLS_CODEPAGE_874=m
++CONFIG_NLS_ISO8859_8=m
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_ISO8859_2=m
++CONFIG_NLS_ISO8859_3=m
++CONFIG_NLS_ISO8859_4=m
++CONFIG_NLS_ISO8859_5=m
++CONFIG_NLS_ISO8859_6=m
++CONFIG_NLS_ISO8859_7=m
++CONFIG_NLS_ISO8859_9=m
++CONFIG_NLS_ISO8859_13=m
++CONFIG_NLS_ISO8859_14=m
++CONFIG_NLS_ISO8859_15=m
++CONFIG_NLS_KOI8_R=m
++CONFIG_NLS_KOI8_U=m
++CONFIG_NLS_UTF8=m
++CONFIG_DLM=m
++CONFIG_DLM_DEBUG=y
++CONFIG_DYNAMIC_DEBUG=y
++CONFIG_DEBUG_INFO=y
++CONFIG_DEBUG_INFO_REDUCED=y
++# CONFIG_ENABLE_WARN_DEPRECATED is not set
++CONFIG_STRIP_ASM_SYMS=y
++CONFIG_DEBUG_FS=y
++CONFIG_HEADERS_CHECK=y
++# CONFIG_FRAME_POINTER is not set
++CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
++CONFIG_DEBUG_VM=y
++CONFIG_DEBUG_MEMORY_INIT=y
++CONFIG_DEBUG_STACKOVERFLOW=y
++CONFIG_LOCKUP_DETECTOR=y
++CONFIG_SCHEDSTATS=y
++CONFIG_TIMER_STATS=y
++CONFIG_DEBUG_LIST=y
++CONFIG_DEBUG_CREDENTIALS=y
++CONFIG_RCU_CPU_STALL_TIMEOUT=60
++CONFIG_ASYNC_RAID6_TEST=m
++CONFIG_KGDB=y
++CONFIG_SECURITY=y
++CONFIG_SECURITYFS=y
++CONFIG_SECURITY_NETWORK=y
++CONFIG_SECURITY_NETWORK_XFRM=y
++CONFIG_SECURITY_SELINUX=y
++CONFIG_SECURITY_SELINUX_BOOTPARAM=y
++CONFIG_SECURITY_SELINUX_DISABLE=y
++CONFIG_CRYPTO_PCRYPT=m
++CONFIG_CRYPTO_CRYPTD=m
++CONFIG_CRYPTO_TEST=m
++CONFIG_CRYPTO_CCM=m
++CONFIG_CRYPTO_GCM=m
++CONFIG_CRYPTO_CTS=m
++CONFIG_CRYPTO_LRW=m
++CONFIG_CRYPTO_PCBC=m
++CONFIG_CRYPTO_XTS=m
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_XCBC=m
++CONFIG_CRYPTO_VMAC=m
++CONFIG_CRYPTO_MICHAEL_MIC=m
++CONFIG_CRYPTO_RMD128=m
++CONFIG_CRYPTO_RMD160=m
++CONFIG_CRYPTO_RMD256=m
++CONFIG_CRYPTO_RMD320=m
++CONFIG_CRYPTO_SHA1=y
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_WP512=m
++CONFIG_CRYPTO_ANUBIS=m
++CONFIG_CRYPTO_BLOWFISH=m
++CONFIG_CRYPTO_CAMELLIA=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_CAST6=m
++CONFIG_CRYPTO_FCRYPT=m
++CONFIG_CRYPTO_KHAZAD=m
++CONFIG_CRYPTO_SEED=m
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_TWOFISH=m
++CONFIG_CRYPTO_LZO=m
+diff --git a/arch/tile/configs/tilepro_defconfig b/arch/tile/configs/tilepro_defconfig
+new file mode 100644
+index 000000000000..e8c4003cbd81
+--- /dev/null
++++ b/arch/tile/configs/tilepro_defconfig
+@@ -0,0 +1,524 @@
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_AUDIT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++CONFIG_TASKSTATS=y
++CONFIG_TASK_DELAY_ACCT=y
++CONFIG_TASK_XACCT=y
++CONFIG_TASK_IO_ACCOUNTING=y
++CONFIG_LOG_BUF_SHIFT=19
++CONFIG_CGROUPS=y
++CONFIG_CGROUP_DEBUG=y
++CONFIG_CGROUP_DEVICE=y
++CONFIG_CPUSETS=y
++CONFIG_CGROUP_CPUACCT=y
++CONFIG_CGROUP_SCHED=y
++CONFIG_RT_GROUP_SCHED=y
++CONFIG_BLK_CGROUP=y
++CONFIG_NAMESPACES=y
++CONFIG_RELAY=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_RD_XZ=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_EMBEDDED=y
++# CONFIG_COMPAT_BRK is not set
++CONFIG_PROFILING=y
++CONFIG_MODULES=y
++CONFIG_MODULE_FORCE_LOAD=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_BLK_DEV_INTEGRITY=y
++CONFIG_PARTITION_ADVANCED=y
++CONFIG_OSF_PARTITION=y
++CONFIG_AMIGA_PARTITION=y
++CONFIG_MAC_PARTITION=y
++CONFIG_BSD_DISKLABEL=y
++CONFIG_MINIX_SUBPARTITION=y
++CONFIG_SOLARIS_X86_PARTITION=y
++CONFIG_UNIXWARE_DISKLABEL=y
++CONFIG_SGI_PARTITION=y
++CONFIG_SUN_PARTITION=y
++CONFIG_KARMA_PARTITION=y
++CONFIG_CFQ_GROUP_IOSCHED=y
++CONFIG_HZ_100=y
++# CONFIG_COMPACTION is not set
++CONFIG_PREEMPT=y
++CONFIG_PCI_DEBUG=y
++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
++CONFIG_BINFMT_MISC=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_XFRM_USER=y
++CONFIG_XFRM_SUB_POLICY=y
++CONFIG_XFRM_STATISTICS=y
++CONFIG_NET_KEY=m
++CONFIG_NET_KEY_MIGRATE=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_IP_MULTIPLE_TABLES=y
++CONFIG_IP_ROUTE_MULTIPATH=y
++CONFIG_IP_ROUTE_VERBOSE=y
++CONFIG_NET_IPIP=m
++CONFIG_IP_MROUTE=y
++CONFIG_IP_PIMSM_V1=y
++CONFIG_IP_PIMSM_V2=y
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++CONFIG_INET_IPCOMP=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++CONFIG_INET_DIAG=m
++CONFIG_TCP_CONG_ADVANCED=y
++CONFIG_TCP_CONG_HSTCP=m
++CONFIG_TCP_CONG_HYBLA=m
++CONFIG_TCP_CONG_SCALABLE=m
++CONFIG_TCP_CONG_LP=m
++CONFIG_TCP_CONG_VENO=m
++CONFIG_TCP_CONG_YEAH=m
++CONFIG_TCP_CONG_ILLINOIS=m
++CONFIG_TCP_MD5SIG=y
++CONFIG_IPV6=y
++CONFIG_IPV6_ROUTER_PREF=y
++CONFIG_IPV6_ROUTE_INFO=y
++CONFIG_IPV6_OPTIMISTIC_DAD=y
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++CONFIG_IPV6_MIP6=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_TUNNEL=m
++CONFIG_IPV6_MULTIPLE_TABLES=y
++CONFIG_IPV6_MROUTE=y
++CONFIG_IPV6_PIMSM_V2=y
++CONFIG_NETLABEL=y
++CONFIG_NETFILTER=y
++CONFIG_NF_CONNTRACK=m
++CONFIG_NF_CONNTRACK_SECMARK=y
++CONFIG_NF_CONNTRACK_ZONES=y
++CONFIG_NF_CONNTRACK_EVENTS=y
++CONFIG_NF_CT_PROTO_DCCP=m
++CONFIG_NF_CT_PROTO_UDPLITE=m
++CONFIG_NF_CONNTRACK_AMANDA=m
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_H323=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NF_CONNTRACK_NETBIOS_NS=m
++CONFIG_NF_CONNTRACK_PPTP=m
++CONFIG_NF_CONNTRACK_SANE=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CONNTRACK_TFTP=m
++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
++CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
++CONFIG_NETFILTER_XT_TARGET_DSCP=m
++CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
++CONFIG_NETFILTER_XT_TARGET_MARK=m
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
++CONFIG_NETFILTER_XT_TARGET_TEE=m
++CONFIG_NETFILTER_XT_TARGET_TPROXY=m
++CONFIG_NETFILTER_XT_TARGET_TRACE=m
++CONFIG_NETFILTER_XT_TARGET_SECMARK=m
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
++CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
++CONFIG_NETFILTER_XT_MATCH_COMMENT=m
++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_DCCP=m
++CONFIG_NETFILTER_XT_MATCH_DSCP=m
++CONFIG_NETFILTER_XT_MATCH_ESP=m
++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_HELPER=m
++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
++CONFIG_NETFILTER_XT_MATCH_IPVS=m
++CONFIG_NETFILTER_XT_MATCH_LENGTH=m
++CONFIG_NETFILTER_XT_MATCH_LIMIT=m
++CONFIG_NETFILTER_XT_MATCH_MAC=m
++CONFIG_NETFILTER_XT_MATCH_MARK=m
++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++CONFIG_NETFILTER_XT_MATCH_OSF=m
++CONFIG_NETFILTER_XT_MATCH_OWNER=m
++CONFIG_NETFILTER_XT_MATCH_POLICY=m
++CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
++CONFIG_NETFILTER_XT_MATCH_QUOTA=m
++CONFIG_NETFILTER_XT_MATCH_RATEEST=m
++CONFIG_NETFILTER_XT_MATCH_REALM=m
++CONFIG_NETFILTER_XT_MATCH_RECENT=m
++CONFIG_NETFILTER_XT_MATCH_SOCKET=m
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
++CONFIG_NETFILTER_XT_MATCH_STRING=m
++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_TIME=m
++CONFIG_NETFILTER_XT_MATCH_U32=m
++CONFIG_IP_VS=m
++CONFIG_IP_VS_IPV6=y
++CONFIG_IP_VS_PROTO_TCP=y
++CONFIG_IP_VS_PROTO_UDP=y
++CONFIG_IP_VS_PROTO_ESP=y
++CONFIG_IP_VS_PROTO_AH=y
++CONFIG_IP_VS_PROTO_SCTP=y
++CONFIG_IP_VS_RR=m
++CONFIG_IP_VS_WRR=m
++CONFIG_IP_VS_LC=m
++CONFIG_IP_VS_WLC=m
++CONFIG_IP_VS_LBLC=m
++CONFIG_IP_VS_LBLCR=m
++CONFIG_IP_VS_SED=m
++CONFIG_IP_VS_NQ=m
++CONFIG_NF_CONNTRACK_IPV4=m
++# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
++CONFIG_IP_NF_IPTABLES=y
++CONFIG_IP_NF_MATCH_AH=m
++CONFIG_IP_NF_MATCH_ECN=m
++CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_FILTER=y
++CONFIG_IP_NF_TARGET_REJECT=y
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_ECN=m
++CONFIG_IP_NF_TARGET_TTL=m
++CONFIG_IP_NF_RAW=m
++CONFIG_IP_NF_SECURITY=m
++CONFIG_IP_NF_ARPTABLES=m
++CONFIG_IP_NF_ARPFILTER=m
++CONFIG_IP_NF_ARP_MANGLE=m
++CONFIG_NF_CONNTRACK_IPV6=m
++CONFIG_IP6_NF_MATCH_AH=m
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_HL=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_MATCH_MH=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_TARGET_HL=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_REJECT=m
++CONFIG_IP6_NF_MANGLE=m
++CONFIG_IP6_NF_RAW=m
++CONFIG_IP6_NF_SECURITY=m
++CONFIG_BRIDGE_NF_EBTABLES=m
++CONFIG_BRIDGE_EBT_BROUTE=m
++CONFIG_BRIDGE_EBT_T_FILTER=m
++CONFIG_BRIDGE_EBT_T_NAT=m
++CONFIG_BRIDGE_EBT_802_3=m
++CONFIG_BRIDGE_EBT_AMONG=m
++CONFIG_BRIDGE_EBT_ARP=m
++CONFIG_BRIDGE_EBT_IP=m
++CONFIG_BRIDGE_EBT_IP6=m
++CONFIG_BRIDGE_EBT_LIMIT=m
++CONFIG_BRIDGE_EBT_MARK=m
++CONFIG_BRIDGE_EBT_PKTTYPE=m
++CONFIG_BRIDGE_EBT_STP=m
++CONFIG_BRIDGE_EBT_VLAN=m
++CONFIG_BRIDGE_EBT_ARPREPLY=m
++CONFIG_BRIDGE_EBT_DNAT=m
++CONFIG_BRIDGE_EBT_MARK_T=m
++CONFIG_BRIDGE_EBT_REDIRECT=m
++CONFIG_BRIDGE_EBT_SNAT=m
++CONFIG_BRIDGE_EBT_LOG=m
++CONFIG_BRIDGE_EBT_ULOG=m
++CONFIG_BRIDGE_EBT_NFLOG=m
++CONFIG_RDS=m
++CONFIG_RDS_TCP=m
++CONFIG_BRIDGE=m
++CONFIG_VLAN_8021Q=m
++CONFIG_VLAN_8021Q_GVRP=y
++CONFIG_PHONET=m
++CONFIG_NET_SCHED=y
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++CONFIG_NET_SCH_PRIO=m
++CONFIG_NET_SCH_MULTIQ=m
++CONFIG_NET_SCH_RED=m
++CONFIG_NET_SCH_SFQ=m
++CONFIG_NET_SCH_TEQL=m
++CONFIG_NET_SCH_TBF=m
++CONFIG_NET_SCH_GRED=m
++CONFIG_NET_SCH_DSMARK=m
++CONFIG_NET_SCH_NETEM=m
++CONFIG_NET_SCH_DRR=m
++CONFIG_NET_SCH_INGRESS=m
++CONFIG_NET_CLS_BASIC=m
++CONFIG_NET_CLS_TCINDEX=m
++CONFIG_NET_CLS_ROUTE4=m
++CONFIG_NET_CLS_FW=m
++CONFIG_NET_CLS_U32=m
++CONFIG_CLS_U32_PERF=y
++CONFIG_CLS_U32_MARK=y
++CONFIG_NET_CLS_RSVP=m
++CONFIG_NET_CLS_RSVP6=m
++CONFIG_NET_CLS_FLOW=m
++CONFIG_NET_CLS_CGROUP=y
++CONFIG_NET_EMATCH=y
++CONFIG_NET_EMATCH_CMP=m
++CONFIG_NET_EMATCH_NBYTE=m
++CONFIG_NET_EMATCH_U32=m
++CONFIG_NET_EMATCH_META=m
++CONFIG_NET_EMATCH_TEXT=m
++CONFIG_NET_CLS_ACT=y
++CONFIG_NET_ACT_POLICE=m
++CONFIG_NET_ACT_GACT=m
++CONFIG_GACT_PROB=y
++CONFIG_NET_ACT_MIRRED=m
++CONFIG_NET_ACT_IPT=m
++CONFIG_NET_ACT_NAT=m
++CONFIG_NET_ACT_PEDIT=m
++CONFIG_NET_ACT_SIMP=m
++CONFIG_NET_ACT_SKBEDIT=m
++CONFIG_NET_CLS_IND=y
++CONFIG_DCB=y
++CONFIG_DNS_RESOLVER=y
++# CONFIG_WIRELESS is not set
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_CONNECTOR=y
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++CONFIG_BLK_DEV_SX8=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_SIZE=16384
++CONFIG_ATA_OVER_ETH=m
++CONFIG_RAID_ATTRS=m
++CONFIG_BLK_DEV_SD=y
++CONFIG_SCSI_CONSTANTS=y
++CONFIG_SCSI_LOGGING=y
++CONFIG_ATA=y
++CONFIG_SATA_SIL24=y
++# CONFIG_ATA_SFF is not set
++CONFIG_MD=y
++CONFIG_BLK_DEV_MD=y
++CONFIG_MD_LINEAR=m
++CONFIG_MD_RAID0=m
++CONFIG_MD_RAID1=m
++CONFIG_MD_RAID10=m
++CONFIG_MD_RAID456=m
++CONFIG_MD_FAULTY=m
++CONFIG_BLK_DEV_DM=m
++CONFIG_DM_DEBUG=y
++CONFIG_DM_CRYPT=m
++CONFIG_DM_SNAPSHOT=m
++CONFIG_DM_MIRROR=m
++CONFIG_DM_LOG_USERSPACE=m
++CONFIG_DM_ZERO=m
++CONFIG_DM_MULTIPATH=m
++CONFIG_DM_MULTIPATH_QL=m
++CONFIG_DM_MULTIPATH_ST=m
++CONFIG_DM_DELAY=m
++CONFIG_DM_UEVENT=y
++CONFIG_FUSION=y
++CONFIG_FUSION_SAS=y
++CONFIG_NETDEVICES=y
++CONFIG_BONDING=m
++CONFIG_DUMMY=m
++CONFIG_IFB=m
++CONFIG_MACVLAN=m
++CONFIG_MACVTAP=m
++CONFIG_NETCONSOLE=m
++CONFIG_NETCONSOLE_DYNAMIC=y
++CONFIG_TUN=y
++CONFIG_VETH=m
++CONFIG_NET_DSA_MV88E6060=y
++CONFIG_NET_DSA_MV88E6XXX=y
++# CONFIG_NET_VENDOR_3COM is not set
++CONFIG_E1000E=y
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++CONFIG_HW_RANDOM=y
++CONFIG_HW_RANDOM_TIMERIOMEM=m
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++# CONFIG_VGA_ARB is not set
++# CONFIG_USB_SUPPORT is not set
++CONFIG_EDAC=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_TILE=y
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++CONFIG_EXT2_FS_POSIX_ACL=y
++CONFIG_EXT2_FS_SECURITY=y
++CONFIG_EXT2_FS_XIP=y
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_POSIX_ACL=y
++CONFIG_EXT3_FS_SECURITY=y
++CONFIG_EXT4_FS=y
++CONFIG_EXT4_FS_POSIX_ACL=y
++CONFIG_EXT4_FS_SECURITY=y
++CONFIG_XFS_FS=y
++CONFIG_XFS_QUOTA=y
++CONFIG_XFS_POSIX_ACL=y
++CONFIG_GFS2_FS=m
++CONFIG_GFS2_FS_LOCKING_DLM=y
++CONFIG_BTRFS_FS=m
++CONFIG_BTRFS_FS_POSIX_ACL=y
++CONFIG_QUOTA=y
++CONFIG_QUOTA_NETLINK_INTERFACE=y
++# CONFIG_PRINT_QUOTA_WARNING is not set
++CONFIG_QFMT_V2=y
++CONFIG_AUTOFS4_FS=m
++CONFIG_FUSE_FS=y
++CONFIG_CUSE=m
++CONFIG_FSCACHE=m
++CONFIG_FSCACHE_STATS=y
++CONFIG_CACHEFILES=m
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_UDF_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
++CONFIG_PROC_KCORE=y
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++CONFIG_HUGETLBFS=y
++CONFIG_CONFIGFS_FS=m
++CONFIG_ECRYPT_FS=m
++CONFIG_CRAMFS=m
++CONFIG_SQUASHFS=m
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=m
++CONFIG_NFS_V4_1=y
++CONFIG_NFS_FSCACHE=y
++CONFIG_NFSD=m
++CONFIG_NFSD_V3_ACL=y
++CONFIG_NFSD_V4=y
++CONFIG_CIFS=m
++CONFIG_CIFS_STATS=y
++CONFIG_CIFS_WEAK_PW_HASH=y
++CONFIG_CIFS_UPCALL=y
++CONFIG_CIFS_XATTR=y
++CONFIG_CIFS_POSIX=y
++CONFIG_CIFS_DFS_UPCALL=y
++CONFIG_CIFS_FSCACHE=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="utf8"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=m
++CONFIG_NLS_CODEPAGE_775=m
++CONFIG_NLS_CODEPAGE_850=m
++CONFIG_NLS_CODEPAGE_852=m
++CONFIG_NLS_CODEPAGE_855=m
++CONFIG_NLS_CODEPAGE_857=m
++CONFIG_NLS_CODEPAGE_860=m
++CONFIG_NLS_CODEPAGE_861=m
++CONFIG_NLS_CODEPAGE_862=m
++CONFIG_NLS_CODEPAGE_863=m
++CONFIG_NLS_CODEPAGE_864=m
++CONFIG_NLS_CODEPAGE_865=m
++CONFIG_NLS_CODEPAGE_866=m
++CONFIG_NLS_CODEPAGE_869=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++CONFIG_NLS_CODEPAGE_932=m
++CONFIG_NLS_CODEPAGE_949=m
++CONFIG_NLS_CODEPAGE_874=m
++CONFIG_NLS_ISO8859_8=m
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_ISO8859_2=m
++CONFIG_NLS_ISO8859_3=m
++CONFIG_NLS_ISO8859_4=m
++CONFIG_NLS_ISO8859_5=m
++CONFIG_NLS_ISO8859_6=m
++CONFIG_NLS_ISO8859_7=m
++CONFIG_NLS_ISO8859_9=m
++CONFIG_NLS_ISO8859_13=m
++CONFIG_NLS_ISO8859_14=m
++CONFIG_NLS_ISO8859_15=m
++CONFIG_NLS_KOI8_R=m
++CONFIG_NLS_KOI8_U=m
++CONFIG_NLS_UTF8=m
++CONFIG_DLM=m
++CONFIG_DLM_DEBUG=y
++CONFIG_DYNAMIC_DEBUG=y
++CONFIG_DEBUG_INFO=y
++CONFIG_DEBUG_INFO_REDUCED=y
++# CONFIG_ENABLE_WARN_DEPRECATED is not set
++CONFIG_FRAME_WARN=2048
++CONFIG_STRIP_ASM_SYMS=y
++CONFIG_DEBUG_FS=y
++CONFIG_HEADERS_CHECK=y
++# CONFIG_FRAME_POINTER is not set
++CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
++CONFIG_MAGIC_SYSRQ=y
++CONFIG_DEBUG_VM=y
++CONFIG_DEBUG_MEMORY_INIT=y
++CONFIG_DEBUG_STACKOVERFLOW=y
++CONFIG_LOCKUP_DETECTOR=y
++CONFIG_SCHEDSTATS=y
++CONFIG_TIMER_STATS=y
++CONFIG_DEBUG_LIST=y
++CONFIG_DEBUG_CREDENTIALS=y
++CONFIG_RCU_CPU_STALL_TIMEOUT=60
++CONFIG_ASYNC_RAID6_TEST=m
++CONFIG_SECURITY=y
++CONFIG_SECURITYFS=y
++CONFIG_SECURITY_NETWORK=y
++CONFIG_SECURITY_NETWORK_XFRM=y
++CONFIG_SECURITY_SELINUX=y
++CONFIG_SECURITY_SELINUX_BOOTPARAM=y
++CONFIG_SECURITY_SELINUX_DISABLE=y
++CONFIG_CRYPTO_PCRYPT=m
++CONFIG_CRYPTO_CRYPTD=m
++CONFIG_CRYPTO_TEST=m
++CONFIG_CRYPTO_CCM=m
++CONFIG_CRYPTO_GCM=m
++CONFIG_CRYPTO_CTS=m
++CONFIG_CRYPTO_LRW=m
++CONFIG_CRYPTO_PCBC=m
++CONFIG_CRYPTO_XTS=m
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_XCBC=m
++CONFIG_CRYPTO_VMAC=m
++CONFIG_CRYPTO_MICHAEL_MIC=m
++CONFIG_CRYPTO_RMD128=m
++CONFIG_CRYPTO_RMD160=m
++CONFIG_CRYPTO_RMD256=m
++CONFIG_CRYPTO_RMD320=m
++CONFIG_CRYPTO_SHA1=y
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_WP512=m
++CONFIG_CRYPTO_ANUBIS=m
++CONFIG_CRYPTO_BLOWFISH=m
++CONFIG_CRYPTO_CAMELLIA=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_CAST6=m
++CONFIG_CRYPTO_FCRYPT=m
++CONFIG_CRYPTO_KHAZAD=m
++CONFIG_CRYPTO_SEED=m
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_TWOFISH=m
++CONFIG_CRYPTO_LZO=m
++CONFIG_CRC_CCITT=m
++CONFIG_CRC7=m
+diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
+index 0eb9f92f3717..e5890ae917e5 100644
+--- a/arch/x86/configs/i386_defconfig
++++ b/arch/x86/configs/i386_defconfig
+@@ -41,7 +41,7 @@ CONFIG_SMP=y
+ CONFIG_X86_GENERIC=y
+ CONFIG_HPET_TIMER=y
+ CONFIG_SCHED_SMT=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+ CONFIG_X86_MCE=y
+ CONFIG_X86_REBOOTFIXUPS=y
+diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
+index e32fc1f274d8..4368ba4f7967 100644
+--- a/arch/x86/configs/x86_64_defconfig
++++ b/arch/x86/configs/x86_64_defconfig
+@@ -40,7 +40,7 @@ CONFIG_SMP=y
+ CONFIG_CALGARY_IOMMU=y
+ CONFIG_NR_CPUS=64
+ CONFIG_SCHED_SMT=y
+-CONFIG_PREEMPT_VOLUNTARY=y
++CONFIG_PREEMPT=y
+ CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+ CONFIG_X86_MCE=y
+ CONFIG_MICROCODE=y
+diff --git a/kernel/Kconfig.preempt b/kernel/Kconfig.preempt
+index cd1655122ec0..9cf10230d5fb 100644
+--- a/kernel/Kconfig.preempt
++++ b/kernel/Kconfig.preempt
+@@ -1,7 +1,7 @@
+
+ choice
+ prompt "Preemption Model"
+- default PREEMPT_NONE
++ default PREEMPT
+
+ config PREEMPT_NONE
+ bool "No Forced Preemption (Server)"
+@@ -17,7 +17,7 @@ config PREEMPT_NONE
+ latencies.
+
+ config PREEMPT_VOLUNTARY
+- bool "Voluntary Kernel Preemption (Desktop)"
++ bool "Voluntary Kernel Preemption (Nothing)"
+ depends on !ARCH_NO_PREEMPT
+ help
+ This option reduces the latency of the kernel by adding more
+@@ -32,7 +32,8 @@ config PREEMPT_VOLUNTARY
+ applications to run more 'smoothly' even when the system is
+ under load.
+
+- Select this if you are building a kernel for a desktop system.
++ Select this for no system in particular (choose Preemptible
++ instead on a desktop if you know what's good for you).
+
+ config PREEMPT
+ bool "Preemptible Kernel (Low-Latency Desktop)"
+@@ -57,4 +58,4 @@ config PREEMPT
+ endchoice
+
+ config PREEMPT_COUNT
+- bool
+\ No newline at end of file
++ bool
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0004-Expose-vmsplit-for-our-poor-32-bit-users.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0004-Expose-vmsplit-for-our-poor-32-bit-users.patch
new file mode 100644
index 00000000..0aaae235
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0004-Expose-vmsplit-for-our-poor-32-bit-users.patch
@@ -0,0 +1,48 @@
+From d67d0504370871bea9e73c69c840fb3d0a88d9cb Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Fri, 12 May 2017 13:07:37 +1000
+Subject: [PATCH 04/16] Expose vmsplit for our poor 32 bit users.
+
+---
+ arch/x86/Kconfig | 12 ++++++------
+ 1 file changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
+index 88bfccabcf3b..cfa268364ec7 100644
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -1495,7 +1495,7 @@ config HIGHMEM64G
+ endchoice
+
+ choice
+- prompt "Memory split" if EXPERT
++ prompt "Memory split"
+ default VMSPLIT_3G
+ depends on X86_32
+ ---help---
+@@ -1515,17 +1515,17 @@ choice
+ option alone!
+
+ config VMSPLIT_3G
+- bool "3G/1G user/kernel split"
++ bool "Default 896MB lowmem (3G/1G user/kernel split)"
+ config VMSPLIT_3G_OPT
+ depends on !X86_PAE
+- bool "3G/1G user/kernel split (for full 1G low memory)"
++ bool "1GB lowmem (3G/1G user/kernel split)"
+ config VMSPLIT_2G
+- bool "2G/2G user/kernel split"
++ bool "2GB lowmem (2G/2G user/kernel split)"
+ config VMSPLIT_2G_OPT
+ depends on !X86_PAE
+- bool "2G/2G user/kernel split (for full 2G low memory)"
++ bool "2GB lowmem (2G/2G user/kernel split)"
+ config VMSPLIT_1G
+- bool "1G/3G user/kernel split"
++ bool "3GB lowmem (1G/3G user/kernel split)"
+ endchoice
+
+ config PAGE_OFFSET
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0005-Create-highres-timeout-variants-of-schedule_timeout-.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0005-Create-highres-timeout-variants-of-schedule_timeout-.patch
new file mode 100644
index 00000000..500dd852
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0005-Create-highres-timeout-variants-of-schedule_timeout-.patch
@@ -0,0 +1,153 @@
+From 552f25751a108c7e185b82aa3110d43bfe1e59b1 Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Sat, 12 Aug 2017 11:53:39 +1000
+Subject: [PATCH 05/16] Create highres timeout variants of schedule_timeout
+ functions.
+
+---
+ include/linux/freezer.h | 1 +
+ include/linux/sched.h | 31 ++++++++++++++++--
+ kernel/time/hrtimer.c | 71 +++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 101 insertions(+), 2 deletions(-)
+
+diff --git a/include/linux/freezer.h b/include/linux/freezer.h
+index 21f5aa0b217f..ee9b46394fdf 100644
+--- a/include/linux/freezer.h
++++ b/include/linux/freezer.h
+@@ -297,6 +297,7 @@ static inline void set_freezable(void) {}
+ #define wait_event_freezekillable_unsafe(wq, condition) \
+ wait_event_killable(wq, condition)
+
++#define pm_freezing (false)
+ #endif /* !CONFIG_FREEZER */
+
+ #endif /* FREEZER_H_INCLUDED */
+diff --git a/include/linux/sched.h b/include/linux/sched.h
+index 1f8cea1436b4..1cd022304c64 100644
+--- a/include/linux/sched.h
++++ b/include/linux/sched.h
+@@ -211,13 +211,40 @@ struct task_group;
+
+ extern void scheduler_tick(void);
+
+-#define MAX_SCHEDULE_TIMEOUT LONG_MAX
+-
++#define MAX_SCHEDULE_TIMEOUT LONG_MAX
+ extern long schedule_timeout(long timeout);
+ extern long schedule_timeout_interruptible(long timeout);
+ extern long schedule_timeout_killable(long timeout);
+ extern long schedule_timeout_uninterruptible(long timeout);
+ extern long schedule_timeout_idle(long timeout);
++
++#ifdef CONFIG_HIGH_RES_TIMERS
++extern long schedule_msec_hrtimeout(long timeout);
++extern long schedule_min_hrtimeout(void);
++extern long schedule_msec_hrtimeout_interruptible(long timeout);
++extern long schedule_msec_hrtimeout_uninterruptible(long timeout);
++#else
++static inline long schedule_msec_hrtimeout(long timeout)
++{
++ return schedule_timeout(msecs_to_jiffies(timeout));
++}
++
++static inline long schedule_min_hrtimeout(void)
++{
++ return schedule_timeout(1);
++}
++
++static inline long schedule_msec_hrtimeout_interruptible(long timeout)
++{
++ return schedule_timeout_interruptible(msecs_to_jiffies(timeout));
++}
++
++static inline long schedule_msec_hrtimeout_uninterruptible(long timeout)
++{
++ return schedule_timeout_uninterruptible(msecs_to_jiffies(timeout));
++}
++#endif
++
+ asmlinkage void schedule(void);
+ extern void schedule_preempt_disabled(void);
+
+diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c
+index e1a549c9e399..12735724cce4 100644
+--- a/kernel/time/hrtimer.c
++++ b/kernel/time/hrtimer.c
+@@ -2026,3 +2026,74 @@ int __sched schedule_hrtimeout(ktime_t *expires,
+ return schedule_hrtimeout_range(expires, 0, mode);
+ }
+ EXPORT_SYMBOL_GPL(schedule_hrtimeout);
++
++/*
++ * As per schedule_hrtimeout but taskes a millisecond value and returns how
++ * many milliseconds are left.
++ */
++long __sched schedule_msec_hrtimeout(long timeout)
++{
++ struct hrtimer_sleeper t;
++ int delta, secs, jiffs;
++ ktime_t expires;
++
++ if (!timeout) {
++ __set_current_state(TASK_RUNNING);
++ return 0;
++ }
++
++ jiffs = msecs_to_jiffies(timeout);
++ /*
++ * If regular timer resolution is adequate or hrtimer resolution is not
++ * (yet) better than Hz, as would occur during startup, use regular
++ * timers.
++ */
++ if (jiffs > 4 || hrtimer_resolution >= NSEC_PER_SEC / HZ)
++ return schedule_timeout(jiffs);
++
++ secs = timeout / 1000;
++ delta = (timeout % 1000) * NSEC_PER_MSEC;
++ expires = ktime_set(secs, delta);
++
++ hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
++ hrtimer_set_expires_range_ns(&t.timer, expires, delta);
++
++ hrtimer_init_sleeper(&t, current);
++
++ hrtimer_start_expires(&t.timer, HRTIMER_MODE_REL);
++
++ if (likely(t.task))
++ schedule();
++
++ hrtimer_cancel(&t.timer);
++ destroy_hrtimer_on_stack(&t.timer);
++
++ __set_current_state(TASK_RUNNING);
++
++ expires = hrtimer_expires_remaining(&t.timer);
++ timeout = ktime_to_ms(expires);
++ return timeout < 0 ? 0 : timeout;
++}
++
++EXPORT_SYMBOL(schedule_msec_hrtimeout);
++
++long __sched schedule_min_hrtimeout(void)
++{
++ return schedule_msec_hrtimeout(1);
++}
++
++EXPORT_SYMBOL(schedule_min_hrtimeout);
++
++long __sched schedule_msec_hrtimeout_interruptible(long timeout)
++{
++ __set_current_state(TASK_INTERRUPTIBLE);
++ return schedule_msec_hrtimeout(timeout);
++}
++EXPORT_SYMBOL(schedule_msec_hrtimeout_interruptible);
++
++long __sched schedule_msec_hrtimeout_uninterruptible(long timeout)
++{
++ __set_current_state(TASK_UNINTERRUPTIBLE);
++ return schedule_msec_hrtimeout(timeout);
++}
++EXPORT_SYMBOL(schedule_msec_hrtimeout_uninterruptible);
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0006-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0006-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch
new file mode 100644
index 00000000..aa348475
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0006-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch
@@ -0,0 +1,49 @@
+From 65ea992f1da66b8c0a5554776d1350417b9107cb Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Sat, 5 Nov 2016 09:27:36 +1100
+Subject: [PATCH 06/16] Special case calls of schedule_timeout(1) to use the
+ min hrtimeout of 1ms, working around low Hz resolutions.
+
+---
+ kernel/time/timer.c | 16 ++++++++++++++--
+ 1 file changed, 14 insertions(+), 2 deletions(-)
+
+diff --git a/kernel/time/timer.c b/kernel/time/timer.c
+index 981eaddff95b..ae942d459aa2 100644
+--- a/kernel/time/timer.c
++++ b/kernel/time/timer.c
+@@ -1801,6 +1801,18 @@ signed long __sched schedule_timeout(signed long timeout)
+
+ expire = timeout + jiffies;
+
++#ifdef CONFIG_HIGH_RES_TIMERS
++ if (timeout == 1 && hrtimer_resolution < NSEC_PER_SEC / HZ) {
++ /*
++ * Special case 1 as being a request for the minimum timeout
++ * and use highres timers to timeout after 1ms to workaround
++ * the granularity of low Hz tick timers.
++ */
++ if (!schedule_min_hrtimeout())
++ return 0;
++ goto out_timeout;
++ }
++#endif
+ timer.task = current;
+ timer_setup_on_stack(&timer.timer, process_timeout, 0);
+ __mod_timer(&timer.timer, expire, 0);
+@@ -1809,10 +1821,10 @@ signed long __sched schedule_timeout(signed long timeout)
+
+ /* Remove the timer from the object tracker */
+ destroy_timer_on_stack(&timer.timer);
+-
++out_timeout:
+ timeout = expire - jiffies;
+
+- out:
++out:
+ return timeout < 0 ? 0 : timeout;
+ }
+ EXPORT_SYMBOL(schedule_timeout);
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0007-Convert-msleep-to-use-hrtimers-when-active.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0007-Convert-msleep-to-use-hrtimers-when-active.patch
new file mode 100644
index 00000000..e9edcd12
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0007-Convert-msleep-to-use-hrtimers-when-active.patch
@@ -0,0 +1,54 @@
+From 7b74daf29a88f3314af306509bd40d45c34f11c7 Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Fri, 4 Nov 2016 09:25:54 +1100
+Subject: [PATCH 07/16] Convert msleep to use hrtimers when active.
+
+---
+ kernel/time/timer.c | 24 ++++++++++++++++++++++--
+ 1 file changed, 22 insertions(+), 2 deletions(-)
+
+diff --git a/kernel/time/timer.c b/kernel/time/timer.c
+index ae942d459aa2..542c13d98950 100644
+--- a/kernel/time/timer.c
++++ b/kernel/time/timer.c
+@@ -1965,7 +1965,19 @@ void __init init_timers(void)
+ */
+ void msleep(unsigned int msecs)
+ {
+- unsigned long timeout = msecs_to_jiffies(msecs) + 1;
++ int jiffs = msecs_to_jiffies(msecs);
++ unsigned long timeout;
++
++ /*
++ * Use high resolution timers where the resolution of tick based
++ * timers is inadequate.
++ */
++ if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ) {
++ while (msecs)
++ msecs = schedule_msec_hrtimeout_uninterruptible(msecs);
++ return;
++ }
++ timeout = msecs_to_jiffies(msecs) + 1;
+
+ while (timeout)
+ timeout = schedule_timeout_uninterruptible(timeout);
+@@ -1979,7 +1991,15 @@ EXPORT_SYMBOL(msleep);
+ */
+ unsigned long msleep_interruptible(unsigned int msecs)
+ {
+- unsigned long timeout = msecs_to_jiffies(msecs) + 1;
++ int jiffs = msecs_to_jiffies(msecs);
++ unsigned long timeout;
++
++ if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ) {
++ while (msecs && !signal_pending(current))
++ msecs = schedule_msec_hrtimeout_interruptible(msecs);
++ return msecs;
++ }
++ timeout = msecs_to_jiffies(msecs) + 1;
+
+ while (timeout && !signal_pending(current))
+ timeout = schedule_timeout_interruptible(timeout);
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0008-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0008-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch
new file mode 100644
index 00000000..f4b441d8
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0008-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch
@@ -0,0 +1,1009 @@
+From 8a679ba5279cbff1a8e4c47b55ac4bd6d66289f8 Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Mon, 20 Feb 2017 13:28:30 +1100
+Subject: [PATCH 08/16] Replace all schedule timeout(1) with
+ schedule_min_hrtimeout()
+
+---
+ drivers/block/swim.c | 6 +-
+ drivers/bluetooth/hci_qca.c | 2 +-
+ drivers/char/ipmi/ipmi_msghandler.c | 2 +-
+ drivers/char/ipmi/ipmi_ssif.c | 2 +-
+ drivers/char/snsc.c | 4 +-
+ drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c | 2 +-
+ drivers/gpu/drm/vmwgfx/vmwgfx_irq.c | 2 +-
+ drivers/media/pci/ivtv/ivtv-ioctl.c | 2 +-
+ drivers/media/pci/ivtv/ivtv-streams.c | 2 +-
+ drivers/mfd/ucb1x00-core.c | 2 +-
+ drivers/misc/sgi-xp/xpc_channel.c | 2 +-
+ drivers/net/caif/caif_hsi.c | 2 +-
+ drivers/net/can/usb/peak_usb/pcan_usb.c | 2 +-
+ drivers/net/usb/lan78xx.c | 2 +-
+ drivers/net/usb/usbnet.c | 2 +-
+ drivers/scsi/fnic/fnic_scsi.c | 4 +-
+ drivers/scsi/snic/snic_scsi.c | 2 +-
+ .../staging/comedi/drivers/ni_mio_common.c | 2 +-
+ drivers/staging/lustre/lnet/lnet/lib-eq.c | 426 ++++++++++++++++++
+ drivers/staging/rts5208/rtsx.c | 2 +-
+ drivers/staging/speakup/speakup_acntpc.c | 4 +-
+ drivers/staging/speakup/speakup_apollo.c | 2 +-
+ drivers/staging/speakup/speakup_decext.c | 2 +-
+ drivers/staging/speakup/speakup_decpc.c | 2 +-
+ drivers/staging/speakup/speakup_dectlk.c | 2 +-
+ drivers/staging/speakup/speakup_dtlk.c | 4 +-
+ drivers/staging/speakup/speakup_keypc.c | 4 +-
+ drivers/staging/speakup/synth.c | 14 +-
+ .../staging/unisys/visornic/visornic_main.c | 6 +-
+ drivers/video/fbdev/omap/hwa742.c | 2 +-
+ drivers/video/fbdev/pxafb.c | 2 +-
+ fs/btrfs/extent-tree.c | 2 +-
+ fs/btrfs/inode-map.c | 2 +-
+ sound/usb/line6/pcm.c | 2 +-
+ 34 files changed, 471 insertions(+), 51 deletions(-)
+ create mode 100644 drivers/staging/lustre/lnet/lnet/lib-eq.c
+
+diff --git a/drivers/block/swim.c b/drivers/block/swim.c
+index 0e31884a9519..16fcfbde31d5 100644
+--- a/drivers/block/swim.c
++++ b/drivers/block/swim.c
+@@ -332,7 +332,7 @@ static inline void swim_motor(struct swim __iomem *base,
+ if (swim_readbit(base, MOTOR_ON))
+ break;
+ current->state = TASK_INTERRUPTIBLE;
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ }
+ } else if (action == OFF) {
+ swim_action(base, MOTOR_OFF);
+@@ -351,7 +351,7 @@ static inline void swim_eject(struct swim __iomem *base)
+ if (!swim_readbit(base, DISK_IN))
+ break;
+ current->state = TASK_INTERRUPTIBLE;
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ }
+ swim_select(base, RELAX);
+ }
+@@ -375,7 +375,7 @@ static inline int swim_step(struct swim __iomem *base)
+ for (wait = 0; wait < HZ; wait++) {
+
+ current->state = TASK_INTERRUPTIBLE;
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+
+ swim_select(base, RELAX);
+ if (!swim_readbit(base, STEP))
+diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
+index 2fee65886d50..4ca0bae3df58 100644
+--- a/drivers/bluetooth/hci_qca.c
++++ b/drivers/bluetooth/hci_qca.c
+@@ -980,7 +980,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
+ * then host can communicate with new baudrate to controller
+ */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+- schedule_timeout(msecs_to_jiffies(BAUDRATE_SETTLE_TIMEOUT_MS));
++ schedule_msec_hrtimeout((BAUDRATE_SETTLE_TIMEOUT_MS));
+ set_current_state(TASK_RUNNING);
+
+ if (qcadev->btsoc_type == QCA_WCN3990)
+diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
+index 7fc9612070a1..5a7f8a879001 100644
+--- a/drivers/char/ipmi/ipmi_msghandler.c
++++ b/drivers/char/ipmi/ipmi_msghandler.c
+@@ -3453,7 +3453,7 @@ static void cleanup_smi_msgs(struct ipmi_smi *intf)
+ /* Current message first, to preserve order */
+ while (intf->curr_msg && !list_empty(&intf->waiting_rcv_msgs)) {
+ /* Wait for the message to clear out. */
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ }
+
+ /* No need for locks, the interface is down. */
+diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c
+index 29e67a80fb20..73bd0eca5fe5 100644
+--- a/drivers/char/ipmi/ipmi_ssif.c
++++ b/drivers/char/ipmi/ipmi_ssif.c
+@@ -1208,7 +1208,7 @@ static void shutdown_ssif(void *send_info)
+
+ /* make sure the driver is not looking for flags any more. */
+ while (ssif_info->ssif_state != SSIF_NORMAL)
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+
+ ssif_info->stopping = true;
+ del_timer_sync(&ssif_info->retry_timer);
+diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c
+index 5918ea7499bb..5228e78df804 100644
+--- a/drivers/char/snsc.c
++++ b/drivers/char/snsc.c
+@@ -198,7 +198,7 @@ scdrv_read(struct file *file, char __user *buf, size_t count, loff_t *f_pos)
+ add_wait_queue(&sd->sd_rq, &wait);
+ spin_unlock_irqrestore(&sd->sd_rlock, flags);
+
+- schedule_timeout(msecs_to_jiffies(SCDRV_TIMEOUT));
++ schedule_msec_hrtimeout((SCDRV_TIMEOUT));
+
+ remove_wait_queue(&sd->sd_rq, &wait);
+ if (signal_pending(current)) {
+@@ -294,7 +294,7 @@ scdrv_write(struct file *file, const char __user *buf,
+ add_wait_queue(&sd->sd_wq, &wait);
+ spin_unlock_irqrestore(&sd->sd_wlock, flags);
+
+- schedule_timeout(msecs_to_jiffies(SCDRV_TIMEOUT));
++ schedule_msec_hrtimeout((SCDRV_TIMEOUT));
+
+ remove_wait_queue(&sd->sd_wq, &wait);
+ if (signal_pending(current)) {
+diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
+index d0fd147ef75f..730ae4fe6b85 100644
+--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
++++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
+@@ -235,7 +235,7 @@ static int vmw_fifo_wait_noirq(struct vmw_private *dev_priv,
+ DRM_ERROR("SVGA device lockup.\n");
+ break;
+ }
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ if (interruptible && signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ break;
+diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
+index c3ad4478266b..7e2a29d56459 100644
+--- a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
++++ b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
+@@ -202,7 +202,7 @@ int vmw_fallback_wait(struct vmw_private *dev_priv,
+ break;
+ }
+ if (lazy)
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ else if ((++count & 0x0F) == 0) {
+ /**
+ * FIXME: Use schedule_hr_timeout here for
+diff --git a/drivers/media/pci/ivtv/ivtv-ioctl.c b/drivers/media/pci/ivtv/ivtv-ioctl.c
+index 4cdc6d2be85d..22c0803cbff3 100644
+--- a/drivers/media/pci/ivtv/ivtv-ioctl.c
++++ b/drivers/media/pci/ivtv/ivtv-ioctl.c
+@@ -1154,7 +1154,7 @@ void ivtv_s_std_dec(struct ivtv *itv, v4l2_std_id std)
+ TASK_UNINTERRUPTIBLE);
+ if ((read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16) < 100)
+ break;
+- schedule_timeout(msecs_to_jiffies(25));
++ schedule_msec_hrtimeout((25));
+ }
+ finish_wait(&itv->vsync_waitq, &wait);
+ mutex_lock(&itv->serialize_lock);
+diff --git a/drivers/media/pci/ivtv/ivtv-streams.c b/drivers/media/pci/ivtv/ivtv-streams.c
+index d27c6df97566..e9ffc4eeb478 100644
+--- a/drivers/media/pci/ivtv/ivtv-streams.c
++++ b/drivers/media/pci/ivtv/ivtv-streams.c
+@@ -834,7 +834,7 @@ int ivtv_stop_v4l2_encode_stream(struct ivtv_stream *s, int gop_end)
+ while (!test_bit(IVTV_F_I_EOS, &itv->i_flags) &&
+ time_before(jiffies,
+ then + msecs_to_jiffies(2000))) {
+- schedule_timeout(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout((10));
+ }
+
+ /* To convert jiffies to ms, we must multiply by 1000
+diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
+index d6fb2e1a759a..7ac951b84beb 100644
+--- a/drivers/mfd/ucb1x00-core.c
++++ b/drivers/mfd/ucb1x00-core.c
+@@ -253,7 +253,7 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
+ break;
+ /* yield to other processes */
+ set_current_state(TASK_INTERRUPTIBLE);
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ }
+
+ return UCB_ADC_DAT(val);
+diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
+index 05a890ce2ab8..f6eb97bc3a2c 100644
+--- a/drivers/misc/sgi-xp/xpc_channel.c
++++ b/drivers/misc/sgi-xp/xpc_channel.c
+@@ -834,7 +834,7 @@ xpc_allocate_msg_wait(struct xpc_channel *ch)
+
+ atomic_inc(&ch->n_on_msg_allocate_wq);
+ prepare_to_wait(&ch->msg_allocate_wq, &wait, TASK_INTERRUPTIBLE);
+- ret = schedule_timeout(1);
++ ret = schedule_min_hrtimeout();
+ finish_wait(&ch->msg_allocate_wq, &wait);
+ atomic_dec(&ch->n_on_msg_allocate_wq);
+
+diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c
+index 433a14b9f731..4d197a99472b 100644
+--- a/drivers/net/caif/caif_hsi.c
++++ b/drivers/net/caif/caif_hsi.c
+@@ -939,7 +939,7 @@ static void cfhsi_wake_down(struct work_struct *work)
+ break;
+
+ set_current_state(TASK_INTERRUPTIBLE);
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ retry--;
+ }
+
+diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c
+index 13238a72a338..fc51ae55c63f 100644
+--- a/drivers/net/can/usb/peak_usb/pcan_usb.c
++++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
+@@ -250,7 +250,7 @@ static int pcan_usb_write_mode(struct peak_usb_device *dev, u8 onoff)
+ } else {
+ /* the PCAN-USB needs time to init */
+ set_current_state(TASK_INTERRUPTIBLE);
+- schedule_timeout(msecs_to_jiffies(PCAN_USB_STARTUP_TIMEOUT));
++ schedule_msec_hrtimeout((PCAN_USB_STARTUP_TIMEOUT));
+ }
+
+ return err;
+diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
+index c3c9ba44e2a1..1bc66289699f 100644
+--- a/drivers/net/usb/lan78xx.c
++++ b/drivers/net/usb/lan78xx.c
+@@ -2681,7 +2681,7 @@ static void lan78xx_terminate_urbs(struct lan78xx_net *dev)
+ while (!skb_queue_empty(&dev->rxq) &&
+ !skb_queue_empty(&dev->txq) &&
+ !skb_queue_empty(&dev->done)) {
+- schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS));
++ schedule_msec_hrtimeout((UNLINK_TIMEOUT_MS));
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ netif_dbg(dev, ifdown, dev->net,
+ "waited for %d urb completions\n", temp);
+diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
+index 770aa624147f..9384de186bf9 100644
+--- a/drivers/net/usb/usbnet.c
++++ b/drivers/net/usb/usbnet.c
+@@ -770,7 +770,7 @@ static void wait_skb_queue_empty(struct sk_buff_head *q)
+ spin_lock_irqsave(&q->lock, flags);
+ while (!skb_queue_empty(q)) {
+ spin_unlock_irqrestore(&q->lock, flags);
+- schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS));
++ schedule_msec_hrtimeout((UNLINK_TIMEOUT_MS));
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ spin_lock_irqsave(&q->lock, flags);
+ }
+diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
+index 8cbd3c9f0b4c..7e3f9baa4ac6 100644
+--- a/drivers/scsi/fnic/fnic_scsi.c
++++ b/drivers/scsi/fnic/fnic_scsi.c
+@@ -217,7 +217,7 @@ int fnic_fw_reset_handler(struct fnic *fnic)
+
+ /* wait for io cmpl */
+ while (atomic_read(&fnic->in_flight))
+- schedule_timeout(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout((1));
+
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+@@ -2255,7 +2255,7 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
+ }
+ }
+
+- schedule_timeout(msecs_to_jiffies(2 * fnic->config.ed_tov));
++ schedule_msec_hrtimeout((2 * fnic->config.ed_tov));
+
+ /* walk again to check, if IOs are still pending in fw */
+ if (fnic_is_abts_pending(fnic, lr_sc))
+diff --git a/drivers/scsi/snic/snic_scsi.c b/drivers/scsi/snic/snic_scsi.c
+index d9b2e46424aa..4a313a0f2039 100644
+--- a/drivers/scsi/snic/snic_scsi.c
++++ b/drivers/scsi/snic/snic_scsi.c
+@@ -2354,7 +2354,7 @@ snic_reset(struct Scsi_Host *shost, struct scsi_cmnd *sc)
+
+ /* Wait for all the IOs that are entered in Qcmd */
+ while (atomic_read(&snic->ios_inflight))
+- schedule_timeout(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout((1));
+
+ ret = snic_issue_hba_reset(snic, sc);
+ if (ret) {
+diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
+index 4dee2fc37aed..2bb1c1157636 100644
+--- a/drivers/staging/comedi/drivers/ni_mio_common.c
++++ b/drivers/staging/comedi/drivers/ni_mio_common.c
+@@ -4650,7 +4650,7 @@ static int cs5529_wait_for_idle(struct comedi_device *dev)
+ if ((status & NI67XX_CAL_STATUS_BUSY) == 0)
+ break;
+ set_current_state(TASK_INTERRUPTIBLE);
+- if (schedule_timeout(1))
++ if (schedule_min_hrtimeout())
+ return -EIO;
+ }
+ if (i == timeout) {
+diff --git a/drivers/staging/lustre/lnet/lnet/lib-eq.c b/drivers/staging/lustre/lnet/lnet/lib-eq.c
+new file mode 100644
+index 000000000000..8cca151741b2
+--- /dev/null
++++ b/drivers/staging/lustre/lnet/lnet/lib-eq.c
+@@ -0,0 +1,426 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * GPL HEADER START
++ *
++ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 only,
++ * as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License version 2 for more details (a copy is included
++ * in the LICENSE file that accompanied this code).
++ *
++ * You should have received a copy of the GNU General Public License
++ * version 2 along with this program; If not, see
++ * http://www.gnu.org/licenses/gpl-2.0.html
++ *
++ * GPL HEADER END
++ */
++/*
++ * Copyright (c) 2003, 2010, Oracle and/or its affiliates. All rights reserved.
++ * Use is subject to license terms.
++ *
++ * Copyright (c) 2012, Intel Corporation.
++ */
++/*
++ * This file is part of Lustre, http://www.lustre.org/
++ * Lustre is a trademark of Sun Microsystems, Inc.
++ *
++ * lnet/lnet/lib-eq.c
++ *
++ * Library level Event queue management routines
++ */
++
++#define DEBUG_SUBSYSTEM S_LNET
++
++#include <linux/lnet/lib-lnet.h>
++
++/**
++ * Create an event queue that has room for \a count number of events.
++ *
++ * The event queue is circular and older events will be overwritten by new
++ * ones if they are not removed in time by the user using the functions
++ * LNetEQGet(), LNetEQWait(), or LNetEQPoll(). It is up to the user to
++ * determine the appropriate size of the event queue to prevent this loss
++ * of events. Note that when EQ handler is specified in \a callback, no
++ * event loss can happen, since the handler is run for each event deposited
++ * into the EQ.
++ *
++ * \param count The number of events to be stored in the event queue. It
++ * will be rounded up to the next power of two.
++ * \param callback A handler function that runs when an event is deposited
++ * into the EQ. The constant value LNET_EQ_HANDLER_NONE can be used to
++ * indicate that no event handler is desired.
++ * \param handle On successful return, this location will hold a handle for
++ * the newly created EQ.
++ *
++ * \retval 0 On success.
++ * \retval -EINVAL If an parameter is not valid.
++ * \retval -ENOMEM If memory for the EQ can't be allocated.
++ *
++ * \see lnet_eq_handler_t for the discussion on EQ handler semantics.
++ */
++int
++LNetEQAlloc(unsigned int count, lnet_eq_handler_t callback,
++ struct lnet_handle_eq *handle)
++{
++ struct lnet_eq *eq;
++
++ LASSERT(the_lnet.ln_refcount > 0);
++
++ /*
++ * We need count to be a power of 2 so that when eq_{enq,deq}_seq
++ * overflow, they don't skip entries, so the queue has the same
++ * apparent capacity at all times
++ */
++ if (count)
++ count = roundup_pow_of_two(count);
++
++ if (callback != LNET_EQ_HANDLER_NONE && count)
++ CWARN("EQ callback is guaranteed to get every event, do you still want to set eqcount %d for polling event which will have locking overhead? Please contact with developer to confirm\n", count);
++
++ /*
++ * count can be 0 if only need callback, we can eliminate
++ * overhead of enqueue event
++ */
++ if (!count && callback == LNET_EQ_HANDLER_NONE)
++ return -EINVAL;
++
++ eq = kzalloc(sizeof(*eq), GFP_NOFS);
++ if (!eq)
++ return -ENOMEM;
++
++ if (count) {
++ eq->eq_events = kvmalloc_array(count, sizeof(struct lnet_event),
++ GFP_KERNEL | __GFP_ZERO);
++ if (!eq->eq_events)
++ goto failed;
++ /*
++ * NB allocator has set all event sequence numbers to 0,
++ * so all them should be earlier than eq_deq_seq
++ */
++ }
++
++ eq->eq_deq_seq = 1;
++ eq->eq_enq_seq = 1;
++ eq->eq_size = count;
++ eq->eq_callback = callback;
++
++ eq->eq_refs = cfs_percpt_alloc(lnet_cpt_table(),
++ sizeof(*eq->eq_refs[0]));
++ if (!eq->eq_refs)
++ goto failed;
++
++ /* MUST hold both exclusive lnet_res_lock */
++ lnet_res_lock(LNET_LOCK_EX);
++ /*
++ * NB: hold lnet_eq_wait_lock for EQ link/unlink, so we can do
++ * both EQ lookup and poll event with only lnet_eq_wait_lock
++ */
++ lnet_eq_wait_lock();
++
++ lnet_res_lh_initialize(&the_lnet.ln_eq_container, &eq->eq_lh);
++ list_add(&eq->eq_list, &the_lnet.ln_eq_container.rec_active);
++
++ lnet_eq_wait_unlock();
++ lnet_res_unlock(LNET_LOCK_EX);
++
++ lnet_eq2handle(handle, eq);
++ return 0;
++
++failed:
++ kvfree(eq->eq_events);
++
++ if (eq->eq_refs)
++ cfs_percpt_free(eq->eq_refs);
++
++ kfree(eq);
++ return -ENOMEM;
++}
++EXPORT_SYMBOL(LNetEQAlloc);
++
++/**
++ * Release the resources associated with an event queue if it's idle;
++ * otherwise do nothing and it's up to the user to try again.
++ *
++ * \param eqh A handle for the event queue to be released.
++ *
++ * \retval 0 If the EQ is not in use and freed.
++ * \retval -ENOENT If \a eqh does not point to a valid EQ.
++ * \retval -EBUSY If the EQ is still in use by some MDs.
++ */
++int
++LNetEQFree(struct lnet_handle_eq eqh)
++{
++ struct lnet_eq *eq;
++ struct lnet_event *events = NULL;
++ int **refs = NULL;
++ int *ref;
++ int rc = 0;
++ int size = 0;
++ int i;
++
++ LASSERT(the_lnet.ln_refcount > 0);
++
++ lnet_res_lock(LNET_LOCK_EX);
++ /*
++ * NB: hold lnet_eq_wait_lock for EQ link/unlink, so we can do
++ * both EQ lookup and poll event with only lnet_eq_wait_lock
++ */
++ lnet_eq_wait_lock();
++
++ eq = lnet_handle2eq(&eqh);
++ if (!eq) {
++ rc = -ENOENT;
++ goto out;
++ }
++
++ cfs_percpt_for_each(ref, i, eq->eq_refs) {
++ LASSERT(*ref >= 0);
++ if (!*ref)
++ continue;
++
++ CDEBUG(D_NET, "Event equeue (%d: %d) busy on destroy.\n",
++ i, *ref);
++ rc = -EBUSY;
++ goto out;
++ }
++
++ /* stash for free after lock dropped */
++ events = eq->eq_events;
++ size = eq->eq_size;
++ refs = eq->eq_refs;
++
++ lnet_res_lh_invalidate(&eq->eq_lh);
++ list_del(&eq->eq_list);
++ kfree(eq);
++ out:
++ lnet_eq_wait_unlock();
++ lnet_res_unlock(LNET_LOCK_EX);
++
++ kvfree(events);
++ if (refs)
++ cfs_percpt_free(refs);
++
++ return rc;
++}
++EXPORT_SYMBOL(LNetEQFree);
++
++void
++lnet_eq_enqueue_event(struct lnet_eq *eq, struct lnet_event *ev)
++{
++ /* MUST called with resource lock hold but w/o lnet_eq_wait_lock */
++ int index;
++
++ if (!eq->eq_size) {
++ LASSERT(eq->eq_callback != LNET_EQ_HANDLER_NONE);
++ eq->eq_callback(ev);
++ return;
++ }
++
++ lnet_eq_wait_lock();
++ ev->sequence = eq->eq_enq_seq++;
++
++ LASSERT(eq->eq_size == LOWEST_BIT_SET(eq->eq_size));
++ index = ev->sequence & (eq->eq_size - 1);
++
++ eq->eq_events[index] = *ev;
++
++ if (eq->eq_callback != LNET_EQ_HANDLER_NONE)
++ eq->eq_callback(ev);
++
++ /* Wake anyone waiting in LNetEQPoll() */
++ if (waitqueue_active(&the_lnet.ln_eq_waitq))
++ wake_up_all(&the_lnet.ln_eq_waitq);
++ lnet_eq_wait_unlock();
++}
++
++static int
++lnet_eq_dequeue_event(struct lnet_eq *eq, struct lnet_event *ev)
++{
++ int new_index = eq->eq_deq_seq & (eq->eq_size - 1);
++ struct lnet_event *new_event = &eq->eq_events[new_index];
++ int rc;
++
++ /* must called with lnet_eq_wait_lock hold */
++ if (LNET_SEQ_GT(eq->eq_deq_seq, new_event->sequence))
++ return 0;
++
++ /* We've got a new event... */
++ *ev = *new_event;
++
++ CDEBUG(D_INFO, "event: %p, sequence: %lu, eq->size: %u\n",
++ new_event, eq->eq_deq_seq, eq->eq_size);
++
++ /* ...but did it overwrite an event we've not seen yet? */
++ if (eq->eq_deq_seq == new_event->sequence) {
++ rc = 1;
++ } else {
++ /*
++ * don't complain with CERROR: some EQs are sized small
++ * anyway; if it's important, the caller should complain
++ */
++ CDEBUG(D_NET, "Event Queue Overflow: eq seq %lu ev seq %lu\n",
++ eq->eq_deq_seq, new_event->sequence);
++ rc = -EOVERFLOW;
++ }
++
++ eq->eq_deq_seq = new_event->sequence + 1;
++ return rc;
++}
++
++/**
++ * A nonblocking function that can be used to get the next event in an EQ.
++ * If an event handler is associated with the EQ, the handler will run before
++ * this function returns successfully. The event is removed from the queue.
++ *
++ * \param eventq A handle for the event queue.
++ * \param event On successful return (1 or -EOVERFLOW), this location will
++ * hold the next event in the EQ.
++ *
++ * \retval 0 No pending event in the EQ.
++ * \retval 1 Indicates success.
++ * \retval -ENOENT If \a eventq does not point to a valid EQ.
++ * \retval -EOVERFLOW Indicates success (i.e., an event is returned) and that
++ * at least one event between this event and the last event obtained from the
++ * EQ has been dropped due to limited space in the EQ.
++ */
++
++/**
++ * Block the calling process until there is an event in the EQ.
++ * If an event handler is associated with the EQ, the handler will run before
++ * this function returns successfully. This function returns the next event
++ * in the EQ and removes it from the EQ.
++ *
++ * \param eventq A handle for the event queue.
++ * \param event On successful return (1 or -EOVERFLOW), this location will
++ * hold the next event in the EQ.
++ *
++ * \retval 1 Indicates success.
++ * \retval -ENOENT If \a eventq does not point to a valid EQ.
++ * \retval -EOVERFLOW Indicates success (i.e., an event is returned) and that
++ * at least one event between this event and the last event obtained from the
++ * EQ has been dropped due to limited space in the EQ.
++ */
++
++static int
++lnet_eq_wait_locked(int *timeout_ms, long state)
++__must_hold(&the_lnet.ln_eq_wait_lock)
++{
++ int tms = *timeout_ms;
++ int wait;
++ wait_queue_entry_t wl;
++ unsigned long now;
++
++ if (!tms)
++ return -ENXIO; /* don't want to wait and no new event */
++
++ init_waitqueue_entry(&wl, current);
++ set_current_state(state);
++ add_wait_queue(&the_lnet.ln_eq_waitq, &wl);
++
++ lnet_eq_wait_unlock();
++
++ if (tms < 0) {
++ schedule();
++ } else {
++ now = jiffies;
++ schedule_msec_hrtimeout((tms));
++ tms -= jiffies_to_msecs(jiffies - now);
++ if (tms < 0) /* no more wait but may have new event */
++ tms = 0;
++ }
++
++ wait = tms; /* might need to call here again */
++ *timeout_ms = tms;
++
++ lnet_eq_wait_lock();
++ remove_wait_queue(&the_lnet.ln_eq_waitq, &wl);
++
++ return wait;
++}
++
++/**
++ * Block the calling process until there's an event from a set of EQs or
++ * timeout happens.
++ *
++ * If an event handler is associated with the EQ, the handler will run before
++ * this function returns successfully, in which case the corresponding event
++ * is consumed.
++ *
++ * LNetEQPoll() provides a timeout to allow applications to poll, block for a
++ * fixed period, or block indefinitely.
++ *
++ * \param eventqs,neq An array of EQ handles, and size of the array.
++ * \param timeout_ms Time in milliseconds to wait for an event to occur on
++ * one of the EQs. The constant LNET_TIME_FOREVER can be used to indicate an
++ * infinite timeout.
++ * \param interruptible, if true, use TASK_INTERRUPTIBLE, else TASK_NOLOAD
++ * \param event,which On successful return (1 or -EOVERFLOW), \a event will
++ * hold the next event in the EQs, and \a which will contain the index of the
++ * EQ from which the event was taken.
++ *
++ * \retval 0 No pending event in the EQs after timeout.
++ * \retval 1 Indicates success.
++ * \retval -EOVERFLOW Indicates success (i.e., an event is returned) and that
++ * at least one event between this event and the last event obtained from the
++ * EQ indicated by \a which has been dropped due to limited space in the EQ.
++ * \retval -ENOENT If there's an invalid handle in \a eventqs.
++ */
++int
++LNetEQPoll(struct lnet_handle_eq *eventqs, int neq, int timeout_ms,
++ int interruptible,
++ struct lnet_event *event, int *which)
++{
++ int wait = 1;
++ int rc;
++ int i;
++
++ LASSERT(the_lnet.ln_refcount > 0);
++
++ if (neq < 1)
++ return -ENOENT;
++
++ lnet_eq_wait_lock();
++
++ for (;;) {
++ for (i = 0; i < neq; i++) {
++ struct lnet_eq *eq = lnet_handle2eq(&eventqs[i]);
++
++ if (!eq) {
++ lnet_eq_wait_unlock();
++ return -ENOENT;
++ }
++
++ rc = lnet_eq_dequeue_event(eq, event);
++ if (rc) {
++ lnet_eq_wait_unlock();
++ *which = i;
++ return rc;
++ }
++ }
++
++ if (!wait)
++ break;
++
++ /*
++ * return value of lnet_eq_wait_locked:
++ * -1 : did nothing and it's sure no new event
++ * 1 : sleep inside and wait until new event
++ * 0 : don't want to wait anymore, but might have new event
++ * so need to call dequeue again
++ */
++ wait = lnet_eq_wait_locked(&timeout_ms,
++ interruptible ? TASK_INTERRUPTIBLE
++ : TASK_NOLOAD);
++ if (wait < 0) /* no new event */
++ break;
++ }
++
++ lnet_eq_wait_unlock();
++ return 0;
++}
+diff --git a/drivers/staging/rts5208/rtsx.c b/drivers/staging/rts5208/rtsx.c
+index 69e6abe14abf..7d23e214ac21 100644
+--- a/drivers/staging/rts5208/rtsx.c
++++ b/drivers/staging/rts5208/rtsx.c
+@@ -507,7 +507,7 @@ static int rtsx_polling_thread(void *__dev)
+
+ for (;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+- schedule_timeout(msecs_to_jiffies(POLLING_INTERVAL));
++ schedule_msec_hrtimeout((POLLING_INTERVAL));
+
+ /* lock the device pointers */
+ mutex_lock(&dev->dev_mutex);
+diff --git a/drivers/staging/speakup/speakup_acntpc.c b/drivers/staging/speakup/speakup_acntpc.c
+index 28519754b2f0..a96805bbec5c 100644
+--- a/drivers/staging/speakup/speakup_acntpc.c
++++ b/drivers/staging/speakup/speakup_acntpc.c
+@@ -198,7 +198,7 @@ static void do_catch_up(struct spk_synth *synth)
+ full_time_val = full_time->u.n.value;
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+ if (synth_full()) {
+- schedule_timeout(msecs_to_jiffies(full_time_val));
++ schedule_msec_hrtimeout((full_time_val));
+ continue;
+ }
+ set_current_state(TASK_RUNNING);
+@@ -226,7 +226,7 @@ static void do_catch_up(struct spk_synth *synth)
+ jiffy_delta_val = jiffy_delta->u.n.value;
+ delay_time_val = delay_time->u.n.value;
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+- schedule_timeout(msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout(delay_time_val);
+ jiff_max = jiffies + jiffy_delta_val;
+ }
+ }
+diff --git a/drivers/staging/speakup/speakup_apollo.c b/drivers/staging/speakup/speakup_apollo.c
+index 0877b4044c28..627102d048c1 100644
+--- a/drivers/staging/speakup/speakup_apollo.c
++++ b/drivers/staging/speakup/speakup_apollo.c
+@@ -165,7 +165,7 @@ static void do_catch_up(struct spk_synth *synth)
+ if (!synth->io_ops->synth_out(synth, ch)) {
+ synth->io_ops->tiocmset(0, UART_MCR_RTS);
+ synth->io_ops->tiocmset(UART_MCR_RTS, 0);
+- schedule_timeout(msecs_to_jiffies(full_time_val));
++ schedule_msec_hrtimeout(full_time_val);
+ continue;
+ }
+ if (time_after_eq(jiffies, jiff_max) && (ch == SPACE)) {
+diff --git a/drivers/staging/speakup/speakup_decext.c b/drivers/staging/speakup/speakup_decext.c
+index 3741c0fcf5bb..bff857b4aa5f 100644
+--- a/drivers/staging/speakup/speakup_decext.c
++++ b/drivers/staging/speakup/speakup_decext.c
+@@ -176,7 +176,7 @@ static void do_catch_up(struct spk_synth *synth)
+ if (ch == '\n')
+ ch = 0x0D;
+ if (synth_full() || !synth->io_ops->synth_out(synth, ch)) {
+- schedule_timeout(msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout(delay_time_val);
+ continue;
+ }
+ set_current_state(TASK_RUNNING);
+diff --git a/drivers/staging/speakup/speakup_decpc.c b/drivers/staging/speakup/speakup_decpc.c
+index 6649309e0342..c60e4712d817 100644
+--- a/drivers/staging/speakup/speakup_decpc.c
++++ b/drivers/staging/speakup/speakup_decpc.c
+@@ -394,7 +394,7 @@ static void do_catch_up(struct spk_synth *synth)
+ if (ch == '\n')
+ ch = 0x0D;
+ if (dt_sendchar(ch)) {
+- schedule_timeout(msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout((delay_time_val));
+ continue;
+ }
+ set_current_state(TASK_RUNNING);
+diff --git a/drivers/staging/speakup/speakup_dectlk.c b/drivers/staging/speakup/speakup_dectlk.c
+index a144f28ee1a8..c34764fafe2b 100644
+--- a/drivers/staging/speakup/speakup_dectlk.c
++++ b/drivers/staging/speakup/speakup_dectlk.c
+@@ -244,7 +244,7 @@ static void do_catch_up(struct spk_synth *synth)
+ if (ch == '\n')
+ ch = 0x0D;
+ if (synth_full_val || !synth->io_ops->synth_out(synth, ch)) {
+- schedule_timeout(msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout(delay_time_val);
+ continue;
+ }
+ set_current_state(TASK_RUNNING);
+diff --git a/drivers/staging/speakup/speakup_dtlk.c b/drivers/staging/speakup/speakup_dtlk.c
+index dbebed0eeeec..6d83c13ca4a6 100644
+--- a/drivers/staging/speakup/speakup_dtlk.c
++++ b/drivers/staging/speakup/speakup_dtlk.c
+@@ -211,7 +211,7 @@ static void do_catch_up(struct spk_synth *synth)
+ delay_time_val = delay_time->u.n.value;
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+ if (synth_full()) {
+- schedule_timeout(msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout((delay_time_val));
+ continue;
+ }
+ set_current_state(TASK_RUNNING);
+@@ -227,7 +227,7 @@ static void do_catch_up(struct spk_synth *synth)
+ delay_time_val = delay_time->u.n.value;
+ jiffy_delta_val = jiffy_delta->u.n.value;
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+- schedule_timeout(msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout((delay_time_val));
+ jiff_max = jiffies + jiffy_delta_val;
+ }
+ }
+diff --git a/drivers/staging/speakup/speakup_keypc.c b/drivers/staging/speakup/speakup_keypc.c
+index 3901734982a4..4e8a7a98b46d 100644
+--- a/drivers/staging/speakup/speakup_keypc.c
++++ b/drivers/staging/speakup/speakup_keypc.c
+@@ -199,7 +199,7 @@ spin_lock_irqsave(&speakup_info.spinlock, flags);
+ full_time_val = full_time->u.n.value;
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+ if (synth_full()) {
+- schedule_timeout(msecs_to_jiffies(full_time_val));
++ schedule_msec_hrtimeout((full_time_val));
+ continue;
+ }
+ set_current_state(TASK_RUNNING);
+@@ -232,7 +232,7 @@ spin_lock_irqsave(&speakup_info.spinlock, flags);
+ jiffy_delta_val = jiffy_delta->u.n.value;
+ delay_time_val = delay_time->u.n.value;
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+- schedule_timeout(msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout((delay_time_val));
+ jiff_max = jiffies+jiffy_delta_val;
+ }
+ }
+diff --git a/drivers/staging/speakup/synth.c b/drivers/staging/speakup/synth.c
+index 25f259ee4ffc..b9721103e651 100644
+--- a/drivers/staging/speakup/synth.c
++++ b/drivers/staging/speakup/synth.c
+@@ -93,12 +93,8 @@ static void _spk_do_catch_up(struct spk_synth *synth, int unicode)
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+ if (ch == '\n')
+ ch = synth->procspeech;
+- if (unicode)
+- ret = synth->io_ops->synth_out_unicode(synth, ch);
+- else
+- ret = synth->io_ops->synth_out(synth, ch);
+- if (!ret) {
+- schedule_timeout(msecs_to_jiffies(full_time_val));
++ if (!synth->io_ops->synth_out(synth, ch)) {
++ schedule_msec_hrtimeout(full_time_val);
+ continue;
+ }
+ if (time_after_eq(jiffies, jiff_max) && (ch == SPACE)) {
+@@ -108,11 +104,9 @@ static void _spk_do_catch_up(struct spk_synth *synth, int unicode)
+ full_time_val = full_time->u.n.value;
+ spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+ if (synth->io_ops->synth_out(synth, synth->procspeech))
+- schedule_timeout(
+- msecs_to_jiffies(delay_time_val));
++ schedule_msec_hrtimeout(delay_time_val);
+ else
+- schedule_timeout(
+- msecs_to_jiffies(full_time_val));
++ schedule_msec_hrtimeout(full_time_val);
+ jiff_max = jiffies + jiffy_delta_val;
+ }
+ set_current_state(TASK_RUNNING);
+diff --git a/drivers/staging/unisys/visornic/visornic_main.c b/drivers/staging/unisys/visornic/visornic_main.c
+index 3647b8f1ed28..9fb26ccc2b3b 100644
+--- a/drivers/staging/unisys/visornic/visornic_main.c
++++ b/drivers/staging/unisys/visornic/visornic_main.c
+@@ -549,7 +549,7 @@ static int visornic_disable_with_timeout(struct net_device *netdev,
+ }
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&devdata->priv_lock, flags);
+- wait += schedule_timeout(msecs_to_jiffies(10));
++ wait += schedule_msec_hrtimeout((10));
+ spin_lock_irqsave(&devdata->priv_lock, flags);
+ }
+
+@@ -560,7 +560,7 @@ static int visornic_disable_with_timeout(struct net_device *netdev,
+ while (1) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&devdata->priv_lock, flags);
+- schedule_timeout(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout((10));
+ spin_lock_irqsave(&devdata->priv_lock, flags);
+ if (atomic_read(&devdata->usage))
+ break;
+@@ -714,7 +714,7 @@ static int visornic_enable_with_timeout(struct net_device *netdev,
+ }
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&devdata->priv_lock, flags);
+- wait += schedule_timeout(msecs_to_jiffies(10));
++ wait += schedule_msec_hrtimeout((10));
+ spin_lock_irqsave(&devdata->priv_lock, flags);
+ }
+
+diff --git a/drivers/video/fbdev/omap/hwa742.c b/drivers/video/fbdev/omap/hwa742.c
+index 6199d4806193..7c7165f2dad4 100644
+--- a/drivers/video/fbdev/omap/hwa742.c
++++ b/drivers/video/fbdev/omap/hwa742.c
+@@ -926,7 +926,7 @@ static void hwa742_resume(void)
+ if (hwa742_read_reg(HWA742_PLL_DIV_REG) & (1 << 7))
+ break;
+ set_current_state(TASK_UNINTERRUPTIBLE);
+- schedule_timeout(msecs_to_jiffies(5));
++ schedule_msec_hrtimeout((5));
+ }
+ hwa742_set_update_mode(hwa742.update_mode_before_suspend);
+ }
+diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
+index bbed039617a4..681ae041ea77 100644
+--- a/drivers/video/fbdev/pxafb.c
++++ b/drivers/video/fbdev/pxafb.c
+@@ -1287,7 +1287,7 @@ static int pxafb_smart_thread(void *arg)
+ mutex_unlock(&fbi->ctrlr_lock);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+- schedule_timeout(msecs_to_jiffies(30));
++ schedule_msec_hrtimeout((30));
+ }
+
+ pr_debug("%s(): task ending\n", __func__);
+diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
+index 2d9074295d7f..7df3e60e4e89 100644
+--- a/fs/btrfs/extent-tree.c
++++ b/fs/btrfs/extent-tree.c
+@@ -5905,7 +5905,7 @@ int btrfs_delalloc_reserve_metadata(struct btrfs_inode *inode, u64 num_bytes)
+ flush = BTRFS_RESERVE_FLUSH_LIMIT;
+
+ if (btrfs_transaction_in_commit(fs_info))
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ }
+
+ if (delalloc_lock)
+diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c
+index ffca2abf13d0..89b2a7f7397e 100644
+--- a/fs/btrfs/inode-map.c
++++ b/fs/btrfs/inode-map.c
+@@ -75,7 +75,7 @@ static int caching_kthread(void *data)
+ btrfs_release_path(path);
+ root->ino_cache_progress = last;
+ up_read(&fs_info->commit_root_sem);
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ goto again;
+ } else
+ continue;
+diff --git a/sound/usb/line6/pcm.c b/sound/usb/line6/pcm.c
+index 72c6f8e82a7e..46d8c2a148ad 100644
+--- a/sound/usb/line6/pcm.c
++++ b/sound/usb/line6/pcm.c
+@@ -131,7 +131,7 @@ static void line6_wait_clear_audio_urbs(struct snd_line6_pcm *line6pcm,
+ if (!alive)
+ break;
+ set_current_state(TASK_UNINTERRUPTIBLE);
+- schedule_timeout(1);
++ schedule_min_hrtimeout();
+ } while (--timeout > 0);
+ if (alive)
+ dev_err(line6pcm->line6->ifcdev,
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0009-Replace-all-calls-to-schedule_timeout_interruptible-.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0009-Replace-all-calls-to-schedule_timeout_interruptible-.patch
new file mode 100644
index 00000000..0ddf57af
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0009-Replace-all-calls-to-schedule_timeout_interruptible-.patch
@@ -0,0 +1,311 @@
+From cd03bffabeee4f4c8438969b3b4d184d0d0bb81b Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Mon, 20 Feb 2017 13:30:07 +1100
+Subject: [PATCH 09/16] Replace all calls to schedule_timeout_interruptible of
+ potentially under 50ms to use schedule_msec_hrtimeout_interruptible.
+
+---
+ drivers/hwmon/fam15h_power.c | 2 +-
+ drivers/iio/light/tsl2563.c | 6 +-----
+ drivers/media/i2c/msp3400-driver.c | 4 ++--
+ drivers/media/pci/ivtv/ivtv-gpio.c | 6 +++---
+ drivers/media/radio/radio-mr800.c | 2 +-
+ drivers/media/radio/radio-tea5777.c | 2 +-
+ drivers/media/radio/tea575x.c | 2 +-
+ drivers/parport/ieee1284.c | 2 +-
+ drivers/parport/ieee1284_ops.c | 2 +-
+ drivers/platform/x86/intel_ips.c | 8 ++++----
+ net/core/pktgen.c | 2 +-
+ sound/soc/codecs/wm8350.c | 12 ++++++------
+ sound/soc/codecs/wm8900.c | 2 +-
+ sound/soc/codecs/wm9713.c | 4 ++--
+ 14 files changed, 26 insertions(+), 30 deletions(-)
+
+diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
+index 9545a346044f..c24cf1302ec7 100644
+--- a/drivers/hwmon/fam15h_power.c
++++ b/drivers/hwmon/fam15h_power.c
+@@ -237,7 +237,7 @@ static ssize_t power1_average_show(struct device *dev,
+ prev_ptsc[cu] = data->cpu_sw_pwr_ptsc[cu];
+ }
+
+- leftover = schedule_timeout_interruptible(msecs_to_jiffies(data->power_period));
++ leftover = schedule_msec_hrtimeout_interruptible((data->power_period));
+ if (leftover)
+ return 0;
+
+diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
+index 6bbb0b1e6032..f4b83648c405 100644
+--- a/drivers/iio/light/tsl2563.c
++++ b/drivers/iio/light/tsl2563.c
+@@ -282,11 +282,7 @@ static void tsl2563_wait_adc(struct tsl2563_chip *chip)
+ default:
+ delay = 402;
+ }
+- /*
+- * TODO: Make sure that we wait at least required delay but why we
+- * have to extend it one tick more?
+- */
+- schedule_timeout_interruptible(msecs_to_jiffies(delay) + 2);
++ schedule_msec_hrtimeout_interruptible(delay + 1);
+ }
+
+ static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc)
+diff --git a/drivers/media/i2c/msp3400-driver.c b/drivers/media/i2c/msp3400-driver.c
+index 3db966db83eb..f0fab7676f72 100644
+--- a/drivers/media/i2c/msp3400-driver.c
++++ b/drivers/media/i2c/msp3400-driver.c
+@@ -179,7 +179,7 @@ static int msp_read(struct i2c_client *client, int dev, int addr)
+ break;
+ dev_warn(&client->dev, "I/O error #%d (read 0x%02x/0x%02x)\n", err,
+ dev, addr);
+- schedule_timeout_interruptible(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout_interruptible((10));
+ }
+ if (err == 3) {
+ dev_warn(&client->dev, "resetting chip, sound will go off.\n");
+@@ -220,7 +220,7 @@ static int msp_write(struct i2c_client *client, int dev, int addr, int val)
+ break;
+ dev_warn(&client->dev, "I/O error #%d (write 0x%02x/0x%02x)\n", err,
+ dev, addr);
+- schedule_timeout_interruptible(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout_interruptible((10));
+ }
+ if (err == 3) {
+ dev_warn(&client->dev, "resetting chip, sound will go off.\n");
+diff --git a/drivers/media/pci/ivtv/ivtv-gpio.c b/drivers/media/pci/ivtv/ivtv-gpio.c
+index f752f3993687..23372af61ebf 100644
+--- a/drivers/media/pci/ivtv/ivtv-gpio.c
++++ b/drivers/media/pci/ivtv/ivtv-gpio.c
+@@ -117,7 +117,7 @@ void ivtv_reset_ir_gpio(struct ivtv *itv)
+ curout = (curout & ~0xF) | 1;
+ write_reg(curout, IVTV_REG_GPIO_OUT);
+ /* We could use something else for smaller time */
+- schedule_timeout_interruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_interruptible((1));
+ curout |= 2;
+ write_reg(curout, IVTV_REG_GPIO_OUT);
+ curdir &= ~0x80;
+@@ -137,11 +137,11 @@ int ivtv_reset_tuner_gpio(void *dev, int component, int cmd, int value)
+ curout = read_reg(IVTV_REG_GPIO_OUT);
+ curout &= ~(1 << itv->card->xceive_pin);
+ write_reg(curout, IVTV_REG_GPIO_OUT);
+- schedule_timeout_interruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_interruptible((1));
+
+ curout |= 1 << itv->card->xceive_pin;
+ write_reg(curout, IVTV_REG_GPIO_OUT);
+- schedule_timeout_interruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_interruptible((1));
+ return 0;
+ }
+
+diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
+index 0f292c6ba338..9d7f22fe1ca8 100644
+--- a/drivers/media/radio/radio-mr800.c
++++ b/drivers/media/radio/radio-mr800.c
+@@ -378,7 +378,7 @@ static int vidioc_s_hw_freq_seek(struct file *file, void *priv,
+ retval = -ENODATA;
+ break;
+ }
+- if (schedule_timeout_interruptible(msecs_to_jiffies(10))) {
++ if (schedule_msec_hrtimeout_interruptible((10))) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+diff --git a/drivers/media/radio/radio-tea5777.c b/drivers/media/radio/radio-tea5777.c
+index 04ed1a5d1177..d593d28dc286 100644
+--- a/drivers/media/radio/radio-tea5777.c
++++ b/drivers/media/radio/radio-tea5777.c
+@@ -245,7 +245,7 @@ static int radio_tea5777_update_read_reg(struct radio_tea5777 *tea, int wait)
+ }
+
+ if (wait) {
+- if (schedule_timeout_interruptible(msecs_to_jiffies(wait)))
++ if (schedule_msec_hrtimeout_interruptible((wait)))
+ return -ERESTARTSYS;
+ }
+
+diff --git a/drivers/media/radio/tea575x.c b/drivers/media/radio/tea575x.c
+index 7412fe1b10c6..92dce75e6ce9 100644
+--- a/drivers/media/radio/tea575x.c
++++ b/drivers/media/radio/tea575x.c
+@@ -416,7 +416,7 @@ int snd_tea575x_s_hw_freq_seek(struct file *file, struct snd_tea575x *tea,
+ for (;;) {
+ if (time_after(jiffies, timeout))
+ break;
+- if (schedule_timeout_interruptible(msecs_to_jiffies(10))) {
++ if (schedule_msec_hrtimeout_interruptible((10))) {
+ /* some signal arrived, stop search */
+ tea->val &= ~TEA575X_BIT_SEARCH;
+ snd_tea575x_set_freq(tea);
+diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c
+index f12b9da69255..6ca6eecbdb2d 100644
+--- a/drivers/parport/ieee1284.c
++++ b/drivers/parport/ieee1284.c
+@@ -208,7 +208,7 @@ int parport_wait_peripheral(struct parport *port,
+ /* parport_wait_event didn't time out, but the
+ * peripheral wasn't actually ready either.
+ * Wait for another 10ms. */
+- schedule_timeout_interruptible(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout_interruptible((10));
+ }
+ }
+
+diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c
+index 5d41dda6da4e..34705f6b423f 100644
+--- a/drivers/parport/ieee1284_ops.c
++++ b/drivers/parport/ieee1284_ops.c
+@@ -537,7 +537,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
+ /* Yield the port for a while. */
+ if (count && dev->port->irq != PARPORT_IRQ_NONE) {
+ parport_release (dev);
+- schedule_timeout_interruptible(msecs_to_jiffies(40));
++ schedule_msec_hrtimeout_interruptible((40));
+ parport_claim_or_block (dev);
+ }
+ else
+diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c
+index c5ece7ef08c6..9256fb502545 100644
+--- a/drivers/platform/x86/intel_ips.c
++++ b/drivers/platform/x86/intel_ips.c
+@@ -809,7 +809,7 @@ static int ips_adjust(void *data)
+ ips_gpu_lower(ips);
+
+ sleep:
+- schedule_timeout_interruptible(msecs_to_jiffies(IPS_ADJUST_PERIOD));
++ schedule_msec_hrtimeout_interruptible((IPS_ADJUST_PERIOD));
+ } while (!kthread_should_stop());
+
+ dev_dbg(ips->dev, "ips-adjust thread stopped\n");
+@@ -985,7 +985,7 @@ static int ips_monitor(void *data)
+ seqno_timestamp = get_jiffies_64();
+
+ old_cpu_power = thm_readl(THM_CEC);
+- schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
++ schedule_msec_hrtimeout_interruptible((IPS_SAMPLE_PERIOD));
+
+ /* Collect an initial average */
+ for (i = 0; i < IPS_SAMPLE_COUNT; i++) {
+@@ -1012,7 +1012,7 @@ static int ips_monitor(void *data)
+ mchp_samples[i] = mchp;
+ }
+
+- schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
++ schedule_msec_hrtimeout_interruptible((IPS_SAMPLE_PERIOD));
+ if (kthread_should_stop())
+ break;
+ }
+@@ -1039,7 +1039,7 @@ static int ips_monitor(void *data)
+ * us to reduce the sample frequency if the CPU and GPU are idle.
+ */
+ old_cpu_power = thm_readl(THM_CEC);
+- schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
++ schedule_msec_hrtimeout_interruptible((IPS_SAMPLE_PERIOD));
+ last_sample_period = IPS_SAMPLE_PERIOD;
+
+ timer_setup(&ips->timer, monitor_timeout, TIMER_DEFERRABLE);
+diff --git a/net/core/pktgen.c b/net/core/pktgen.c
+index 7f6938405fa1..369ad3eca2a3 100644
+--- a/net/core/pktgen.c
++++ b/net/core/pktgen.c
+@@ -1900,7 +1900,7 @@ static void pktgen_mark_device(const struct pktgen_net *pn, const char *ifname)
+ mutex_unlock(&pktgen_thread_lock);
+ pr_debug("%s: waiting for %s to disappear....\n",
+ __func__, ifname);
+- schedule_timeout_interruptible(msecs_to_jiffies(msec_per_try));
++ schedule_msec_hrtimeout_interruptible((msec_per_try));
+ mutex_lock(&pktgen_thread_lock);
+
+ if (++i >= max_tries) {
+diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
+index e92ebe52d485..88791ebb6df0 100644
+--- a/sound/soc/codecs/wm8350.c
++++ b/sound/soc/codecs/wm8350.c
+@@ -236,10 +236,10 @@ static void wm8350_pga_work(struct work_struct *work)
+ out2->ramp == WM8350_RAMP_UP) {
+ /* delay is longer over 0dB as increases are larger */
+ if (i >= WM8350_OUTn_0dB)
+- schedule_timeout_interruptible(msecs_to_jiffies
++ schedule_msec_hrtimeout_interruptible(
+ (2));
+ else
+- schedule_timeout_interruptible(msecs_to_jiffies
++ schedule_msec_hrtimeout_interruptible(
+ (1));
+ } else
+ udelay(50); /* doesn't matter if we delay longer */
+@@ -1123,7 +1123,7 @@ static int wm8350_set_bias_level(struct snd_soc_component *component,
+ (platform->dis_out4 << 6));
+
+ /* wait for discharge */
+- schedule_timeout_interruptible(msecs_to_jiffies
++ schedule_msec_hrtimeout_interruptible(
+ (platform->
+ cap_discharge_msecs));
+
+@@ -1139,7 +1139,7 @@ static int wm8350_set_bias_level(struct snd_soc_component *component,
+ WM8350_VBUFEN);
+
+ /* wait for vmid */
+- schedule_timeout_interruptible(msecs_to_jiffies
++ schedule_msec_hrtimeout_interruptible(
+ (platform->
+ vmid_charge_msecs));
+
+@@ -1190,7 +1190,7 @@ static int wm8350_set_bias_level(struct snd_soc_component *component,
+ wm8350_reg_write(wm8350, WM8350_POWER_MGMT_1, pm1);
+
+ /* wait */
+- schedule_timeout_interruptible(msecs_to_jiffies
++ schedule_msec_hrtimeout_interruptible(
+ (platform->
+ vmid_discharge_msecs));
+
+@@ -1208,7 +1208,7 @@ static int wm8350_set_bias_level(struct snd_soc_component *component,
+ pm1 | WM8350_OUTPUT_DRAIN_EN);
+
+ /* wait */
+- schedule_timeout_interruptible(msecs_to_jiffies
++ schedule_msec_hrtimeout_interruptible(
+ (platform->drain_msecs));
+
+ pm1 &= ~WM8350_BIASEN;
+diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c
+index 1a14e902949d..68f17d9877ec 100644
+--- a/sound/soc/codecs/wm8900.c
++++ b/sound/soc/codecs/wm8900.c
+@@ -1112,7 +1112,7 @@ static int wm8900_set_bias_level(struct snd_soc_component *component,
+ /* Need to let things settle before stopping the clock
+ * to ensure that restart works, see "Stopping the
+ * master clock" in the datasheet. */
+- schedule_timeout_interruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_interruptible(1);
+ snd_soc_component_write(component, WM8900_REG_POWER2,
+ WM8900_REG_POWER2_SYSCLK_ENA);
+ break;
+diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
+index 643863bb32e0..fc318d71a8a3 100644
+--- a/sound/soc/codecs/wm9713.c
++++ b/sound/soc/codecs/wm9713.c
+@@ -203,7 +203,7 @@ static int wm9713_voice_shutdown(struct snd_soc_dapm_widget *w,
+
+ /* Gracefully shut down the voice interface. */
+ snd_soc_component_update_bits(component, AC97_HANDSET_RATE, 0x0f00, 0x0200);
+- schedule_timeout_interruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_interruptible(1);
+ snd_soc_component_update_bits(component, AC97_HANDSET_RATE, 0x0f00, 0x0f00);
+ snd_soc_component_update_bits(component, AC97_EXTENDED_MID, 0x1000, 0x1000);
+
+@@ -872,7 +872,7 @@ static int wm9713_set_pll(struct snd_soc_component *component,
+ wm9713->pll_in = freq_in;
+
+ /* wait 10ms AC97 link frames for the link to stabilise */
+- schedule_timeout_interruptible(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout_interruptible((10));
+ return 0;
+ }
+
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0010-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0010-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch
new file mode 100644
index 00000000..3eb7c889
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0010-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch
@@ -0,0 +1,160 @@
+From ba3f464ce9dd28a8999f56b327b458f869258a1a Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Mon, 20 Feb 2017 13:30:32 +1100
+Subject: [PATCH 10/16] Replace all calls to schedule_timeout_uninterruptible
+ of potentially under 50ms to use schedule_msec_hrtimeout_uninterruptible
+
+---
+ drivers/media/pci/cx18/cx18-gpio.c | 4 ++--
+ drivers/net/wireless/intel/ipw2x00/ipw2100.c | 4 ++--
+ drivers/rtc/rtc-wm8350.c | 6 +++---
+ drivers/scsi/lpfc/lpfc_scsi.c | 2 +-
+ sound/pci/maestro3.c | 4 ++--
+ sound/soc/codecs/rt5631.c | 4 ++--
+ sound/soc/soc-dapm.c | 2 +-
+ 7 files changed, 13 insertions(+), 13 deletions(-)
+
+diff --git a/drivers/media/pci/cx18/cx18-gpio.c b/drivers/media/pci/cx18/cx18-gpio.c
+index 012859e6dc7b..206bd08265a5 100644
+--- a/drivers/media/pci/cx18/cx18-gpio.c
++++ b/drivers/media/pci/cx18/cx18-gpio.c
+@@ -90,11 +90,11 @@ static void gpio_reset_seq(struct cx18 *cx, u32 active_lo, u32 active_hi,
+
+ /* Assert */
+ gpio_update(cx, mask, ~active_lo);
+- schedule_timeout_uninterruptible(msecs_to_jiffies(assert_msecs));
++ schedule_msec_hrtimeout_uninterruptible((assert_msecs));
+
+ /* Deassert */
+ gpio_update(cx, mask, ~active_hi);
+- schedule_timeout_uninterruptible(msecs_to_jiffies(recovery_msecs));
++ schedule_msec_hrtimeout_uninterruptible((recovery_msecs));
+ }
+
+ /*
+diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2100.c b/drivers/net/wireless/intel/ipw2x00/ipw2100.c
+index 910db46db6a1..497b01ab32d4 100644
+--- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c
++++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c
+@@ -830,7 +830,7 @@ static int ipw2100_hw_send_command(struct ipw2100_priv *priv,
+ * doesn't seem to have as many firmware restart cycles...
+ *
+ * As a test, we're sticking in a 1/100s delay here */
+- schedule_timeout_uninterruptible(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout_uninterruptible((10));
+
+ return 0;
+
+@@ -1281,7 +1281,7 @@ static int ipw2100_start_adapter(struct ipw2100_priv *priv)
+ IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
+ i = 5000;
+ do {
+- schedule_timeout_uninterruptible(msecs_to_jiffies(40));
++ schedule_msec_hrtimeout_uninterruptible((40));
+ /* Todo... wait for sync command ... */
+
+ read_register(priv->net_dev, IPW_REG_INTA, &inta);
+diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c
+index 483c7993516b..fddbaa475066 100644
+--- a/drivers/rtc/rtc-wm8350.c
++++ b/drivers/rtc/rtc-wm8350.c
+@@ -119,7 +119,7 @@ static int wm8350_rtc_settime(struct device *dev, struct rtc_time *tm)
+ /* Wait until confirmation of stopping */
+ do {
+ rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+- schedule_timeout_uninterruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_uninterruptible((1));
+ } while (--retries && !(rtc_ctrl & WM8350_RTC_STS));
+
+ if (!retries) {
+@@ -202,7 +202,7 @@ static int wm8350_rtc_stop_alarm(struct wm8350 *wm8350)
+ /* Wait until confirmation of stopping */
+ do {
+ rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+- schedule_timeout_uninterruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_uninterruptible((1));
+ } while (retries-- && !(rtc_ctrl & WM8350_RTC_ALMSTS));
+
+ if (!(rtc_ctrl & WM8350_RTC_ALMSTS))
+@@ -225,7 +225,7 @@ static int wm8350_rtc_start_alarm(struct wm8350 *wm8350)
+ /* Wait until confirmation */
+ do {
+ rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+- schedule_timeout_uninterruptible(msecs_to_jiffies(1));
++ schedule_msec_hrtimeout_uninterruptible((1));
+ } while (retries-- && rtc_ctrl & WM8350_RTC_ALMSTS);
+
+ if (rtc_ctrl & WM8350_RTC_ALMSTS)
+diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
+index 5c7858e735c9..b56a01420918 100644
+--- a/drivers/scsi/lpfc/lpfc_scsi.c
++++ b/drivers/scsi/lpfc/lpfc_scsi.c
+@@ -5201,7 +5201,7 @@ lpfc_reset_flush_io_context(struct lpfc_vport *vport, uint16_t tgt_id,
+ tgt_id, lun_id, context);
+ later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+ while (time_after(later, jiffies) && cnt) {
+- schedule_timeout_uninterruptible(msecs_to_jiffies(20));
++ schedule_msec_hrtimeout_uninterruptible((20));
+ cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
+ }
+ if (cnt) {
+diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
+index 62962178a9d7..87e486740da0 100644
+--- a/sound/pci/maestro3.c
++++ b/sound/pci/maestro3.c
+@@ -2016,7 +2016,7 @@ static void snd_m3_ac97_reset(struct snd_m3 *chip)
+ outw(0, io + GPIO_DATA);
+ outw(dir | GPO_PRIMARY_AC97, io + GPIO_DIRECTION);
+
+- schedule_timeout_uninterruptible(msecs_to_jiffies(delay1));
++ schedule_msec_hrtimeout_uninterruptible((delay1));
+
+ outw(GPO_PRIMARY_AC97, io + GPIO_DATA);
+ udelay(5);
+@@ -2024,7 +2024,7 @@ static void snd_m3_ac97_reset(struct snd_m3 *chip)
+ outw(IO_SRAM_ENABLE | SERIAL_AC_LINK_ENABLE, io + RING_BUS_CTRL_A);
+ outw(~0, io + GPIO_MASK);
+
+- schedule_timeout_uninterruptible(msecs_to_jiffies(delay2));
++ schedule_msec_hrtimeout_uninterruptible((delay2));
+
+ if (! snd_m3_try_read_vendor(chip))
+ break;
+diff --git a/sound/soc/codecs/rt5631.c b/sound/soc/codecs/rt5631.c
+index 865f49ac38dd..3c1190dd114f 100644
+--- a/sound/soc/codecs/rt5631.c
++++ b/sound/soc/codecs/rt5631.c
+@@ -419,7 +419,7 @@ static void onebit_depop_mute_stage(struct snd_soc_component *component, int ena
+ hp_zc = snd_soc_component_read32(component, RT5631_INT_ST_IRQ_CTRL_2);
+ snd_soc_component_write(component, RT5631_INT_ST_IRQ_CTRL_2, hp_zc & 0xf7ff);
+ if (enable) {
+- schedule_timeout_uninterruptible(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout_uninterruptible((10));
+ /* config one-bit depop parameter */
+ rt5631_write_index(component, RT5631_SPK_INTL_CTRL, 0x307f);
+ snd_soc_component_update_bits(component, RT5631_HP_OUT_VOL,
+@@ -529,7 +529,7 @@ static void depop_seq_mute_stage(struct snd_soc_component *component, int enable
+ hp_zc = snd_soc_component_read32(component, RT5631_INT_ST_IRQ_CTRL_2);
+ snd_soc_component_write(component, RT5631_INT_ST_IRQ_CTRL_2, hp_zc & 0xf7ff);
+ if (enable) {
+- schedule_timeout_uninterruptible(msecs_to_jiffies(10));
++ schedule_msec_hrtimeout_uninterruptible((10));
+
+ /* config depop sequence parameter */
+ rt5631_write_index(component, RT5631_SPK_INTL_CTRL, 0x302f);
+diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
+index 461d951917c0..b5eb57ba4af4 100644
+--- a/sound/soc/soc-dapm.c
++++ b/sound/soc/soc-dapm.c
+@@ -131,7 +131,7 @@ static void dapm_assert_locked(struct snd_soc_dapm_context *dapm)
+ static void pop_wait(u32 pop_time)
+ {
+ if (pop_time)
+- schedule_timeout_uninterruptible(msecs_to_jiffies(pop_time));
++ schedule_msec_hrtimeout_uninterruptible((pop_time));
+ }
+
+ static void pop_dbg(struct device *dev, u32 pop_time, const char *fmt, ...)
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0011-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0011-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch
new file mode 100644
index 00000000..680e5fcd
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0011-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch
@@ -0,0 +1,69 @@
+From befdee72d814b6c302da85af524b15762e72e0cf Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Mon, 20 Feb 2017 13:32:58 +1100
+Subject: [PATCH 11/16] Don't use hrtimer overlay when pm_freezing since some
+ drivers still don't correctly use freezable timeouts.
+
+---
+ kernel/time/hrtimer.c | 2 +-
+ kernel/time/timer.c | 9 +++++----
+ 2 files changed, 6 insertions(+), 5 deletions(-)
+
+diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c
+index 12735724cce4..32fb7b6d9568 100644
+--- a/kernel/time/hrtimer.c
++++ b/kernel/time/hrtimer.c
+@@ -2048,7 +2048,7 @@ long __sched schedule_msec_hrtimeout(long timeout)
+ * (yet) better than Hz, as would occur during startup, use regular
+ * timers.
+ */
+- if (jiffs > 4 || hrtimer_resolution >= NSEC_PER_SEC / HZ)
++ if (jiffs > 4 || hrtimer_resolution >= NSEC_PER_SEC / HZ || pm_freezing)
+ return schedule_timeout(jiffs);
+
+ secs = timeout / 1000;
+diff --git a/kernel/time/timer.c b/kernel/time/timer.c
+index 542c13d98950..d5d0fa004d2b 100644
+--- a/kernel/time/timer.c
++++ b/kernel/time/timer.c
+@@ -44,6 +44,7 @@
+ #include <linux/sched/debug.h>
+ #include <linux/slab.h>
+ #include <linux/compat.h>
++#include <linux/freezer.h>
+
+ #include <linux/uaccess.h>
+ #include <asm/unistd.h>
+@@ -1972,12 +1973,12 @@ void msleep(unsigned int msecs)
+ * Use high resolution timers where the resolution of tick based
+ * timers is inadequate.
+ */
+- if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ) {
++ if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ && !pm_freezing) {
+ while (msecs)
+ msecs = schedule_msec_hrtimeout_uninterruptible(msecs);
+ return;
+ }
+- timeout = msecs_to_jiffies(msecs) + 1;
++ timeout = jiffs + 1;
+
+ while (timeout)
+ timeout = schedule_timeout_uninterruptible(timeout);
+@@ -1994,12 +1995,12 @@ unsigned long msleep_interruptible(unsigned int msecs)
+ int jiffs = msecs_to_jiffies(msecs);
+ unsigned long timeout;
+
+- if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ) {
++ if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ && !pm_freezing) {
+ while (msecs && !signal_pending(current))
+ msecs = schedule_msec_hrtimeout_interruptible(msecs);
+ return msecs;
+ }
+- timeout = msecs_to_jiffies(msecs) + 1;
++ timeout = jiffs + 1;
+
+ while (timeout && !signal_pending(current))
+ timeout = schedule_timeout_interruptible(timeout);
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0012-Make-threaded-IRQs-optionally-the-default-which-can-.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0012-Make-threaded-IRQs-optionally-the-default-which-can-.patch
new file mode 100644
index 00000000..078a4ba0
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0012-Make-threaded-IRQs-optionally-the-default-which-can-.patch
@@ -0,0 +1,67 @@
+From df4136f6de5b3f45c2f4be7a3cc042903e983e0c Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Wed, 7 Dec 2016 21:13:16 +1100
+Subject: [PATCH 13/16] Make threaded IRQs optionally the default which can be
+ disabled.
+
+---
+ kernel/irq/Kconfig | 17 +++++++++++++++++
+ kernel/irq/manage.c | 11 +++++++++++
+ 2 files changed, 28 insertions(+)
+
+diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
+index 5f3e2baefca9..de3e5740679b 100644
+--- a/kernel/irq/Kconfig
++++ b/kernel/irq/Kconfig
+@@ -107,6 +107,23 @@ config GENERIC_IRQ_RESERVATION_MODE
+ config IRQ_FORCED_THREADING
+ bool
+
++config FORCE_IRQ_THREADING
++ bool "Make IRQ threading compulsory"
++ depends on IRQ_FORCED_THREADING
++ default n
++ ---help---
++
++ Make IRQ threading mandatory for any IRQ handlers that support it
++ instead of being optional and requiring the threadirqs kernel
++ parameter. Instead they can be optionally disabled with the
++ nothreadirqs kernel parameter.
++
++ Enabling this may make some architectures not boot with runqueue
++ sharing and MuQSS.
++
++ Enable if you are building for a desktop or low latency system,
++ otherwise say N.
++
+ config SPARSE_IRQ
+ bool "Support sparse irq numbering" if MAY_HAVE_SPARSE_IRQ
+ ---help---
+diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
+index fb86146037a7..b322b1a0caa0 100644
+--- a/kernel/irq/manage.c
++++ b/kernel/irq/manage.c
+@@ -23,9 +23,20 @@
+ #include "internals.h"
+
+ #ifdef CONFIG_IRQ_FORCED_THREADING
++#ifdef CONFIG_FORCE_IRQ_THREADING
++__read_mostly bool force_irqthreads = true;
++#else
+ __read_mostly bool force_irqthreads;
++#endif
+ EXPORT_SYMBOL_GPL(force_irqthreads);
+
++static int __init setup_noforced_irqthreads(char *arg)
++{
++ force_irqthreads = false;
++ return 0;
++}
++early_param("nothreadirqs", setup_noforced_irqthreads);
++
+ static int __init setup_forced_irqthreads(char *arg)
+ {
+ force_irqthreads = true;
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0013-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0013-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch
new file mode 100644
index 00000000..33a98653
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0013-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch
@@ -0,0 +1,81 @@
+From ace3d66508ad4e17da3f579eaf04c5582b8256a2 Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Wed, 7 Dec 2016 21:23:01 +1100
+Subject: [PATCH 14/16] Reinstate default Hz of 100 in combination with MuQSS
+ and -ck patches.
+
+---
+ kernel/Kconfig.hz | 25 ++++++++++++++++++-------
+ 1 file changed, 18 insertions(+), 7 deletions(-)
+
+diff --git a/kernel/Kconfig.hz b/kernel/Kconfig.hz
+index 2a202a846757..1806fcac8f14 100644
+--- a/kernel/Kconfig.hz
++++ b/kernel/Kconfig.hz
+@@ -4,7 +4,8 @@
+
+ choice
+ prompt "Timer frequency"
+- default HZ_250
++ default HZ_100 if SCHED_MUQSS
++ default HZ_250_NODEF if !SCHED_MUQSS
+ help
+ Allows the configuration of the timer frequency. It is customary
+ to have the timer interrupt run at 1000 Hz but 100 Hz may be more
+@@ -19,11 +20,18 @@ choice
+ config HZ_100
+ bool "100 HZ"
+ help
++ 100 Hz is a suitable choice in combination with MuQSS which does
++ not rely on ticks for rescheduling interrupts, and is not Hz limited
++ for timeouts and sleeps from both the kernel and userspace.
++ This allows us to benefit from the lower overhead and higher
++ throughput of fewer timer ticks.
++
++ Non-MuQSS kernels:
+ 100 Hz is a typical choice for servers, SMP and NUMA systems
+ with lots of processors that may show reduced performance if
+ too many timer interrupts are occurring.
+
+- config HZ_250
++ config HZ_250_NODEF
+ bool "250 HZ"
+ help
+ 250 Hz is a good compromise choice allowing server performance
+@@ -31,7 +39,10 @@ choice
+ on SMP and NUMA systems. If you are going to be using NTSC video
+ or multimedia, selected 300Hz instead.
+
+- config HZ_300
++ 250 Hz is the default choice for the mainline scheduler but not
++ advantageous in combination with MuQSS.
++
++ config HZ_300_NODEF
+ bool "300 HZ"
+ help
+ 300 Hz is a good compromise choice allowing server performance
+@@ -39,7 +50,7 @@ choice
+ on SMP and NUMA systems and exactly dividing by both PAL and
+ NTSC frame rates for video and multimedia work.
+
+- config HZ_1000
++ config HZ_1000_NODEF
+ bool "1000 HZ"
+ help
+ 1000 Hz is the preferred choice for desktop systems and other
+@@ -50,9 +61,9 @@ endchoice
+ config HZ
+ int
+ default 100 if HZ_100
+- default 250 if HZ_250
+- default 300 if HZ_300
+- default 1000 if HZ_1000
++ default 250 if HZ_250_NODEF
++ default 300 if HZ_300_NODEF
++ default 1000 if HZ_1000_NODEF
+
+ config SCHED_HRTICK
+ def_bool HIGH_RES_TIMERS
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0014-Swap-sucks.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0014-Swap-sucks.patch
new file mode 100644
index 00000000..bd68ebec
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0014-Swap-sucks.patch
@@ -0,0 +1,25 @@
+From d8f6f203f5bdabdf1a5ddb6bdc9e13fae2b640b9 Mon Sep 17 00:00:00 2001
+From: Con Kolivas <kernel@kolivas.org>
+Date: Sat, 12 Aug 2017 12:02:04 +1000
+Subject: [PATCH 15/16] Swap sucks.
+
+---
+ mm/vmscan.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/mm/vmscan.c b/mm/vmscan.c
+index c5ef7240cbcb..3f04308b6445 100644
+--- a/mm/vmscan.c
++++ b/mm/vmscan.c
+@@ -159,7 +159,7 @@ struct scan_control {
+ /*
+ * From 0 .. 100. Higher means more swappy.
+ */
+-int vm_swappiness = 60;
++int vm_swappiness = 33;
+ /*
+ * The total number of pages which are beyond the high watermark within all
+ * zones.
+--
+2.17.1
+
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0015-unfuck-MuQSS-on-linux-4_19_10+.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0015-unfuck-MuQSS-on-linux-4_19_10+.patch
new file mode 100644
index 00000000..fbff2e6e
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0015-unfuck-MuQSS-on-linux-4_19_10+.patch
@@ -0,0 +1,14 @@
+diff -Nur a/kernel/sched/MuQSS.c b/kernel/sched/MuQSS.c
+--- a/kernel/sched/MuQSS.c 2019-02-09 19:46:07.899912055 +0000
++++ b/kernel/sched/MuQSS.c 2019-02-09 19:48:03.743622465 +0000
+@@ -1011,6 +1011,10 @@
+ #define CPUIDLE_THREAD_BUSY (16)
+ #define CPUIDLE_DIFF_NODE (32)
+
++#ifdef CONFIG_SCHED_SMT
++DEFINE_STATIC_KEY_FALSE(sched_smt_present);
++#endif
++
+ /*
+ * The best idle CPU is chosen according to the CPUIDLE ranking above where the
+ * lowest value would give the most suitable CPU to schedule p onto next. The
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0016-unfuck-MuQSS-on-linux-4_19_20+.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0016-unfuck-MuQSS-on-linux-4_19_20+.patch
new file mode 100644
index 00000000..201ed408
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-0016-unfuck-MuQSS-on-linux-4_19_20+.patch
@@ -0,0 +1,11 @@
+diff -Nur a/kernel/sched/MuQSS.c b/kernel/sched/MuQSS.c
+--- a/kernel/sched/MuQSS.c 2019-06-19 19:58:03.175461132 +0100
++++ b/kernel/sched/MuQSS.c 2019-06-19 20:00:22.120083431 +0100
+@@ -1013,6 +1013,7 @@
+
+ #ifdef CONFIG_SCHED_SMT
+ DEFINE_STATIC_KEY_FALSE(sched_smt_present);
++EXPORT_SYMBOL_GPL(sched_smt_present);
+ #endif
+
+ /*
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-amd64.config b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-amd64.config
new file mode 100644
index 00000000..274f6f27
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-amd64.config
@@ -0,0 +1,9349 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/x86 4.19.95-redcore-lts Kernel Configuration
+#
+
+#
+# Compiler: gcc (Gentoo Hardened 8.2.0-r1337 p1.6) 8.2.0
+#
+CONFIG_CC_IS_GCC=y
+CONFIG_GCC_VERSION=80200
+CONFIG_CLANG_VERSION=0
+CONFIG_CC_HAS_ASM_GOTO=y
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+CONFIG_THREAD_INFO_IN_TASK=y
+
+#
+# General setup
+#
+CONFIG_SCHED_MUQSS=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+# CONFIG_COMPILE_TEST is not set
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_BUILD_SALT=""
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_LZ4=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_KERNEL_LZ4=y
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_CROSS_MEMORY_ATTACH=y
+# CONFIG_USELIB is not set
+CONFIG_AUDIT=y
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_SIM=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
+CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
+CONFIG_IRQ_FORCED_THREADING=y
+# CONFIG_FORCE_IRQ_THREADING is not set
+CONFIG_SPARSE_IRQ=y
+# CONFIG_GENERIC_IRQ_DEBUGFS is not set
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_HZ_PERIODIC=y
+# CONFIG_NO_HZ_IDLE is not set
+# CONFIG_NO_HZ_FULL is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_COUNT=y
+
+#
+# CPU/Task time and stats accounting
+#
+CONFIG_VIRT_CPU_ACCOUNTING=y
+# CONFIG_TICK_CPU_ACCOUNTING is not set
+CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_SCHED_AVG_IRQ=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_CPU_ISOLATION=y
+
+#
+# RCU Subsystem
+#
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_EXPERT=y
+CONFIG_SRCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_TASKS_RCU=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RCU_NEED_SEGCBLIST=y
+CONFIG_CONTEXT_TRACKING=y
+# CONFIG_CONTEXT_TRACKING_FORCE is not set
+CONFIG_RCU_FANOUT=64
+CONFIG_RCU_FANOUT_LEAF=16
+# CONFIG_RCU_BOOST is not set
+CONFIG_RCU_NOCB_CPU=y
+CONFIG_BUILD_BIN2C=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
+CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
+CONFIG_ARCH_SUPPORTS_INT128=y
+CONFIG_CGROUPS=y
+CONFIG_PAGE_COUNTER=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_SWAP_ENABLED=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+CONFIG_CGROUP_WRITEBACK=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_RDMA=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_BPF=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_SOCK_CGROUP_DATA=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_CHECKPOINT_RESTORE is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_RD_LZ4=y
+CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_LOCAL_INIT is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_HAVE_UID16=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BPF=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_MULTIUSER=y
+CONFIG_SGETMASK_SYSCALL=y
+CONFIG_SYSFS_SYSCALL=y
+CONFIG_FHANDLE=y
+CONFIG_POSIX_TIMERS=y
+CONFIG_PRINTK=y
+CONFIG_PRINTK_NMI=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_FUTEX_PI=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_ADVISE_SYSCALLS=y
+CONFIG_MEMBARRIER=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
+CONFIG_KALLSYMS_BASE_RELATIVE=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_BPF_JIT_ALWAYS_ON=y
+CONFIG_USERFAULTFD=y
+CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
+CONFIG_RSEQ=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SLAB_MERGE_DEFAULT=y
+CONFIG_SLAB_FREELIST_RANDOM=y
+CONFIG_SLAB_FREELIST_HARDENED=y
+CONFIG_SLAB_HARDENED=y
+CONFIG_SLAB_SANITIZE=y
+CONFIG_SLAB_SANITIZE_VERIFY=y
+CONFIG_SLUB_CPU_PARTIAL=y
+CONFIG_SYSTEM_DATA_VERIFICATION=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_64BIT=y
+CONFIG_X86_64=y
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_ARCH_MMAP_RND_BITS_MIN=28
+CONFIG_ARCH_MMAP_RND_BITS_MAX=32
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_FILTER_PGPROT=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ZONE_DMA32=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_64_SMP=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_DYNAMIC_PHYSICAL_MASK=y
+CONFIG_PGTABLE_LEVELS=4
+CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_SMP=y
+CONFIG_X86_FEATURE_NAMES=y
+CONFIG_X86_X2APIC=y
+CONFIG_X86_MPPARSE=y
+# CONFIG_GOLDFISH is not set
+CONFIG_RETPOLINE=y
+CONFIG_INTEL_RDT=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_INTEL_LPSS=y
+CONFIG_X86_AMD_PLATFORM_DEVICE=y
+CONFIG_IOSF_MBI=y
+# CONFIG_IOSF_MBI_DEBUG is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_HYPERVISOR_GUEST=y
+CONFIG_PARAVIRT=y
+# CONFIG_PARAVIRT_DEBUG is not set
+# CONFIG_PARAVIRT_SPINLOCKS is not set
+# CONFIG_XEN is not set
+CONFIG_KVM_GUEST=y
+# CONFIG_KVM_DEBUG_FS is not set
+# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
+CONFIG_PARAVIRT_CLOCK=y
+CONFIG_JAILHOUSE_GUEST=y
+CONFIG_NO_BOOTMEM=y
+# CONFIG_MK8 is not set
+# CONFIG_MPSC is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_GENERIC_CPU=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=64
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+CONFIG_GART_IOMMU=y
+# CONFIG_CALGARY_IOMMU is not set
+CONFIG_MAXSMP=y
+CONFIG_NR_CPUS_RANGE_BEGIN=8192
+CONFIG_NR_CPUS_RANGE_END=8192
+CONFIG_NR_CPUS_DEFAULT=8192
+CONFIG_NR_CPUS=8192
+CONFIG_SCHED_SMT=y
+CONFIG_SMT_NICE=y
+CONFIG_SCHED_MC=y
+CONFIG_SCHED_MC_PRIO=y
+CONFIG_RQ_NONE=y
+# CONFIG_RQ_SMT is not set
+# CONFIG_RQ_MC is not set
+# CONFIG_RQ_SMP is not set
+CONFIG_SHARERQ=0
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+# CONFIG_X86_MCELOG_LEGACY is not set
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
+# CONFIG_X86_MCE_INJECT is not set
+CONFIG_X86_THERMAL_VECTOR=y
+
+#
+# Performance monitoring
+#
+CONFIG_PERF_EVENTS_INTEL_UNCORE=y
+CONFIG_PERF_EVENTS_INTEL_RAPL=y
+CONFIG_PERF_EVENTS_INTEL_CSTATE=y
+CONFIG_PERF_EVENTS_AMD_POWER=m
+CONFIG_X86_16BIT=y
+CONFIG_X86_ESPFIX64=y
+CONFIG_X86_VSYSCALL_EMULATION=y
+CONFIG_I8K=m
+CONFIG_MICROCODE=y
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+# CONFIG_X86_5LEVEL is not set
+CONFIG_X86_DIRECT_GBPAGES=y
+CONFIG_ARCH_HAS_MEM_ENCRYPT=y
+CONFIG_AMD_MEM_ENCRYPT=y
+# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set
+CONFIG_ARCH_USE_MEMREMAP_PROT=y
+CONFIG_NUMA=y
+CONFIG_AMD_NUMA=y
+CONFIG_X86_64_ACPI_NUMA=y
+CONFIG_NODES_SPAN_OTHER_NODES=y
+# CONFIG_NUMA_EMU is not set
+CONFIG_NODES_SHIFT=10
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_MEMORY_PROBE=y
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_X86_PMEM_LEGACY_DEVICE=y
+CONFIG_X86_PMEM_LEGACY=m
+CONFIG_X86_CHECK_BIOS_CORRUPTION=y
+CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_X86_SMAP=y
+CONFIG_X86_INTEL_UMIP=y
+CONFIG_X86_INTEL_MPX=y
+CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
+CONFIG_X86_INTEL_TSX_MODE_OFF=y
+# CONFIG_X86_INTEL_TSX_MODE_ON is not set
+# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
+CONFIG_EFI=y
+CONFIG_EFI_STUB=y
+CONFIG_EFI_MIXED=y
+CONFIG_SECCOMP=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250_NODEF is not set
+# CONFIG_HZ_300_NODEF is not set
+# CONFIG_HZ_1000_NODEF is not set
+CONFIG_HZ=100
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+CONFIG_KEXEC_JUMP=y
+CONFIG_PHYSICAL_START=0x1000000
+CONFIG_RELOCATABLE=y
+CONFIG_RANDOMIZE_BASE=y
+CONFIG_X86_NEED_RELOCS=y
+CONFIG_PHYSICAL_ALIGN=0x1000000
+CONFIG_DYNAMIC_MEMORY_LAYOUT=y
+CONFIG_RANDOMIZE_MEMORY=y
+CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
+CONFIG_HOTPLUG_CPU=y
+CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
+# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
+# CONFIG_COMPAT_VDSO is not set
+CONFIG_LEGACY_VSYSCALL_EMULATE=y
+# CONFIG_LEGACY_VSYSCALL_NONE is not set
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_MODIFY_LDT_SYSCALL=y
+CONFIG_HAVE_LIVEPATCH=y
+# CONFIG_LIVEPATCH is not set
+CONFIG_ARCH_HAS_ADD_PAGES=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_USE_PERCPU_NUMA_NODE_ID=y
+CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
+CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
+CONFIG_ARCH_ENABLE_THP_MIGRATION=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_ARCH_HIBERNATION_HEADER=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_AUTOSLEEP=y
+CONFIG_PM_WAKELOCKS=y
+CONFIG_PM_WAKELOCKS_LIMIT=100
+CONFIG_PM_WAKELOCKS_GC=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_CLK=y
+CONFIG_PM_GENERIC_DOMAINS=y
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
+CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_ARCH_SUPPORTS_ACPI=y
+CONFIG_ACPI=y
+CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
+CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
+CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
+# CONFIG_ACPI_DEBUGGER is not set
+CONFIG_ACPI_SPCR_TABLE=y
+CONFIG_ACPI_LPIT=y
+CONFIG_ACPI_SLEEP=y
+# CONFIG_ACPI_PROCFS_POWER is not set
+CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
+# CONFIG_ACPI_EC_DEBUGFS is not set
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_TAD=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_CPU_FREQ_PSS=y
+CONFIG_ACPI_PROCESSOR_CSTATE=y
+CONFIG_ACPI_PROCESSOR_IDLE=y
+CONFIG_ACPI_CPPC_LIB=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_NUMA=y
+CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
+CONFIG_ACPI_TABLE_UPGRADE=y
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=y
+CONFIG_ACPI_CONTAINER=y
+CONFIG_ACPI_HOTPLUG_MEMORY=y
+CONFIG_ACPI_HOTPLUG_IOAPIC=y
+CONFIG_ACPI_SBS=m
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+CONFIG_ACPI_BGRT=y
+CONFIG_ACPI_NFIT=m
+CONFIG_HAVE_ACPI_APEI=y
+CONFIG_HAVE_ACPI_APEI_NMI=y
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_MEMORY_FAILURE=y
+# CONFIG_ACPI_APEI_EINJ is not set
+# CONFIG_ACPI_APEI_ERST_DEBUG is not set
+CONFIG_DPTF_POWER=m
+CONFIG_ACPI_WATCHDOG=y
+CONFIG_ACPI_EXTLOG=m
+CONFIG_PMIC_OPREGION=y
+# CONFIG_XPOWER_PMIC_OPREGION is not set
+# CONFIG_BXT_WC_PMIC_OPREGION is not set
+CONFIG_CHT_DC_TI_PMIC_OPREGION=y
+CONFIG_ACPI_CONFIGFS=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_SFI=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+
+#
+# CPU frequency scaling drivers
+#
+CONFIG_X86_INTEL_PSTATE=y
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ_CPB=y
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_AMD_FREQ_SENSITIVITY=m
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+# CONFIG_X86_P4_CLOCKMOD is not set
+
+#
+# shared options
+#
+
+#
+# CPU Idle
+#
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_INTEL_IDLE=y
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_MMCONF_FAM10H=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIE_ECRC=y
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+CONFIG_PCIE_DPC=y
+CONFIG_PCIE_PTM=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCI_REALLOC_ENABLE_AUTO=y
+CONFIG_PCI_STUB=m
+CONFIG_PCI_PF_STUB=m
+CONFIG_PCI_ATS=y
+CONFIG_PCI_LOCKLESS_CONFIG=y
+CONFIG_PCI_IOV=y
+CONFIG_PCI_PRI=y
+CONFIG_PCI_PASID=y
+CONFIG_PCI_LABEL=y
+CONFIG_PCI_HYPERV=m
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_ACPI=y
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+CONFIG_HOTPLUG_PCI_CPCI=y
+CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
+CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+#
+# PCI controller drivers
+#
+
+#
+# Cadence PCIe controllers support
+#
+CONFIG_VMD=m
+
+#
+# DesignWare PCI Core Support
+#
+# CONFIG_PCIE_DW_PLAT_HOST is not set
+# CONFIG_PCIE_DW_PLAT_EP is not set
+
+#
+# PCI Endpoint
+#
+CONFIG_PCI_ENDPOINT=y
+CONFIG_PCI_ENDPOINT_CONFIGFS=y
+# CONFIG_PCI_EPF_TEST is not set
+
+#
+# PCI switch controller drivers
+#
+CONFIG_PCI_SW_SWITCHTEC=m
+CONFIG_ISA_DMA_API=y
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_PCCARD_NONSTATIC=y
+CONFIG_RAPIDIO=y
+CONFIG_RAPIDIO_TSI721=y
+CONFIG_RAPIDIO_DISC_TIMEOUT=30
+CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
+CONFIG_RAPIDIO_DMA_ENGINE=y
+# CONFIG_RAPIDIO_DEBUG is not set
+CONFIG_RAPIDIO_ENUM_BASIC=m
+CONFIG_RAPIDIO_CHMAN=m
+CONFIG_RAPIDIO_MPORT_CDEV=m
+
+#
+# RapidIO Switch drivers
+#
+CONFIG_RAPIDIO_TSI57X=y
+CONFIG_RAPIDIO_CPS_XX=y
+CONFIG_RAPIDIO_TSI568=y
+CONFIG_RAPIDIO_CPS_GEN2=y
+CONFIG_RAPIDIO_RXS_GEN3=m
+CONFIG_X86_SYSFB=y
+
+#
+# Binary Emulations
+#
+CONFIG_IA32_EMULATION=y
+CONFIG_IA32_AOUT=y
+CONFIG_X86_X32=y
+CONFIG_COMPAT_32=y
+CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_X86_DEV_DMA_OPS=y
+CONFIG_HAVE_GENERIC_GUP=y
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+# CONFIG_EDD_OFF is not set
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+CONFIG_FW_CFG_SYSFS=m
+# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
+CONFIG_GOOGLE_FIRMWARE=y
+CONFIG_GOOGLE_SMI=m
+CONFIG_GOOGLE_COREBOOT_TABLE=m
+CONFIG_GOOGLE_COREBOOT_TABLE_ACPI=m
+CONFIG_GOOGLE_MEMCONSOLE=m
+CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY=m
+CONFIG_GOOGLE_FRAMEBUFFER_COREBOOT=m
+CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=m
+CONFIG_GOOGLE_VPD=m
+
+#
+# EFI (Extensible Firmware Interface) Support
+#
+CONFIG_EFI_VARS=m
+CONFIG_EFI_ESRT=y
+CONFIG_EFI_VARS_PSTORE=m
+CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
+CONFIG_EFI_RUNTIME_MAP=y
+# CONFIG_EFI_FAKE_MEMMAP is not set
+CONFIG_EFI_RUNTIME_WRAPPERS=y
+CONFIG_EFI_BOOTLOADER_CONTROL=m
+CONFIG_EFI_CAPSULE_LOADER=m
+CONFIG_EFI_TEST=m
+CONFIG_APPLE_PROPERTIES=y
+CONFIG_RESET_ATTACK_MITIGATION=y
+CONFIG_UEFI_CPER=y
+CONFIG_UEFI_CPER_X86=y
+CONFIG_EFI_DEV_PATH_PARSER=y
+
+#
+# Tegra firmware driver
+#
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_IRQFD=y
+CONFIG_HAVE_KVM_IRQ_ROUTING=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
+CONFIG_KVM_VFIO=y
+CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
+CONFIG_KVM_COMPAT=y
+CONFIG_HAVE_KVM_IRQ_BYPASS=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_AMD_SEV=y
+# CONFIG_KVM_MMU_AUDIT is not set
+CONFIG_VHOST_NET=m
+CONFIG_VHOST_SCSI=m
+CONFIG_VHOST_VSOCK=m
+CONFIG_VHOST=m
+# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
+
+#
+# General architecture-dependent options
+#
+CONFIG_CRASH_CORE=y
+CONFIG_KEXEC_CORE=y
+CONFIG_HOTPLUG_SMT=y
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
+# CONFIG_STATIC_KEYS_SELFTEST is not set
+CONFIG_OPTPROBES=y
+CONFIG_KPROBES_ON_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_KRETPROBES=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_KPROBES_ON_FTRACE=y
+CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
+CONFIG_HAVE_NMI=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
+CONFIG_ARCH_HAS_SET_MEMORY=y
+CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
+CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_RSEQ=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_RCU_TABLE_FREE=y
+CONFIG_HAVE_RCU_TABLE_INVALIDATE=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+CONFIG_HAVE_STACKPROTECTOR=y
+CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
+CONFIG_STACKPROTECTOR=y
+CONFIG_STACKPROTECTOR_STRONG=y
+CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
+CONFIG_HAVE_ARCH_HUGE_VMAP=y
+CONFIG_HAVE_ARCH_SOFT_DIRTY=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
+CONFIG_HAVE_EXIT_THREAD=y
+CONFIG_ARCH_MMAP_RND_BITS=32
+CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS=16
+CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
+CONFIG_HAVE_COPY_THREAD_TLS=y
+CONFIG_HAVE_STACK_VALIDATION=y
+CONFIG_HAVE_RELIABLE_STACKTRACE=y
+CONFIG_ISA_BUS_API=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_COMPAT_OLD_SIGACTION=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_HAVE_ARCH_VMAP_STACK=y
+CONFIG_VMAP_STACK=y
+CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
+CONFIG_STRICT_KERNEL_RWX=y
+CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
+CONFIG_STRICT_MODULE_RWX=y
+CONFIG_ARCH_HAS_REFCOUNT=y
+CONFIG_REFCOUNT_FULL=y
+CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_PLUGIN_HOSTCC="g++"
+CONFIG_HAVE_GCC_PLUGINS=y
+# CONFIG_GCC_PLUGINS is not set
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_MODULE_SIG=y
+# CONFIG_MODULE_SIG_FORCE is not set
+CONFIG_MODULE_SIG_ALL=y
+# CONFIG_MODULE_SIG_SHA1 is not set
+# CONFIG_MODULE_SIG_SHA224 is not set
+# CONFIG_MODULE_SIG_SHA256 is not set
+# CONFIG_MODULE_SIG_SHA384 is not set
+CONFIG_MODULE_SIG_SHA512=y
+CONFIG_MODULE_SIG_HASH="sha512"
+CONFIG_MODULE_COMPRESS=y
+CONFIG_MODULE_COMPRESS_GZIP=y
+# CONFIG_MODULE_COMPRESS_XZ is not set
+# CONFIG_TRIM_UNUSED_KSYMS is not set
+CONFIG_MODULES_TREE_LOOKUP=y
+CONFIG_BLOCK=y
+CONFIG_BLK_SCSI_REQUEST=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLK_DEV_ZONED=y
+CONFIG_BLK_DEV_THROTTLING=y
+# CONFIG_BLK_DEV_THROTTLING_LOW is not set
+CONFIG_BLK_CMDLINE_PARSER=y
+CONFIG_BLK_WBT=y
+# CONFIG_BLK_CGROUP_IOLATENCY is not set
+CONFIG_BLK_WBT_SQ=y
+CONFIG_BLK_WBT_MQ=y
+CONFIG_BLK_DEBUG_FS=y
+CONFIG_BLK_DEBUG_FS_ZONED=y
+# CONFIG_BLK_SED_OPAL is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ACORN_PARTITION=y
+CONFIG_ACORN_PARTITION_CUMANA=y
+CONFIG_ACORN_PARTITION_EESOX=y
+CONFIG_ACORN_PARTITION_ICS=y
+CONFIG_ACORN_PARTITION_ADFS=y
+CONFIG_ACORN_PARTITION_POWERTEC=y
+CONFIG_ACORN_PARTITION_RISCIX=y
+CONFIG_AIX_PARTITION=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+CONFIG_SGI_PARTITION=y
+CONFIG_ULTRIX_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_SYSV68_PARTITION=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_BLOCK_COMPAT=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_MQ_VIRTIO=y
+CONFIG_BLK_MQ_RDMA=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_MQ_IOSCHED_DEADLINE=y
+# CONFIG_MQ_IOSCHED_KYBER is not set
+CONFIG_IOSCHED_BFQ=y
+CONFIG_BFQ_GROUP_IOSCHED=y
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_PADATA=y
+CONFIG_ASN1=y
+CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
+CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
+CONFIG_FREEZER=y
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_ELFCORE=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_BINFMT_SCRIPT=y
+CONFIG_BINFMT_MISC=y
+CONFIG_COREDUMP=y
+
+#
+# Memory Management options
+#
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_HAVE_BOOTMEM_INFO_NODE=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MEMORY_BALLOON=y
+CONFIG_BALLOON_COMPACTION=y
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+CONFIG_KSM=y
+CONFIG_UKSM=y
+# CONFIG_KSM_LEGACY is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_MEMORY_FAILURE=y
+# CONFIG_HWPOISON_INJECT is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_ARCH_WANTS_THP_SWAP=y
+CONFIG_THP_SWAP=y
+CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
+CONFIG_CLEANCACHE=y
+CONFIG_FRONTSWAP=y
+CONFIG_CMA=y
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_AREAS=7
+# CONFIG_ZSWAP is not set
+CONFIG_ZPOOL=m
+CONFIG_ZBUD=m
+CONFIG_Z3FOLD=m
+CONFIG_ZSMALLOC=y
+# CONFIG_PGTABLE_MAPPING is not set
+# CONFIG_ZSMALLOC_STAT is not set
+CONFIG_GENERIC_EARLY_IOREMAP=y
+# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
+# CONFIG_IDLE_PAGE_TRACKING is not set
+CONFIG_ARCH_HAS_ZONE_DEVICE=y
+# CONFIG_ZONE_DEVICE is not set
+CONFIG_FRAME_VECTOR=y
+CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
+CONFIG_ARCH_HAS_PKEYS=y
+# CONFIG_PERCPU_STATS is not set
+# CONFIG_GUP_BENCHMARK is not set
+CONFIG_ARCH_HAS_PTE_SPECIAL=y
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+CONFIG_NET_INGRESS=y
+CONFIG_NET_EGRESS=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_DIAG=m
+CONFIG_UNIX=m
+CONFIG_UNIX_DIAG=m
+CONFIG_TLS=m
+# CONFIG_TLS_DEVICE is not set
+CONFIG_XFRM=y
+CONFIG_XFRM_OFFLOAD=y
+CONFIG_XFRM_ALGO=m
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_INTERFACE is not set
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_MIGRATE=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_SMC=m
+CONFIG_SMC_DIAG=m
+CONFIG_XDP_SOCKETS=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_FIB_TRIE_STATS=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IP_TUNNEL=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE_COMMON=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
+CONFIG_NET_UDP_TUNNEL=m
+CONFIG_NET_FOU=m
+CONFIG_NET_FOU_IP_TUNNELS=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_INET_RAW_DIAG=m
+CONFIG_INET_DIAG_DESTROY=y
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_NV=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_TCP_CONG_DCTCP=m
+# CONFIG_TCP_CONG_CDG is not set
+CONFIG_TCP_CONG_BBR=m
+CONFIG_DEFAULT_RENO=y
+CONFIG_DEFAULT_TCP_CONG="reno"
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6=m
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_IPV6_ILA=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_GRE=m
+CONFIG_IPV6_FOU=m
+CONFIG_IPV6_FOU_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_IPV6_SEG6_LWTUNNEL=y
+CONFIG_IPV6_SEG6_HMAC=y
+# CONFIG_NETLABEL is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=m
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_INGRESS=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_FAMILY_BRIDGE=y
+CONFIG_NETFILTER_FAMILY_ARP=y
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_NETLINK_OSF=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_LOG_COMMON=m
+CONFIG_NF_LOG_NETDEV=m
+CONFIG_NETFILTER_CONNCOUNT=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+CONFIG_NF_CONNTRACK_PROCFS=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CONNTRACK_LABELS=y
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NF_CT_NETLINK_HELPER=m
+CONFIG_NETFILTER_NETLINK_GLUE_CT=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_NF_NAT_PROTO_DCCP=y
+CONFIG_NF_NAT_PROTO_UDPLITE=y
+CONFIG_NF_NAT_PROTO_SCTP=y
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_REDIRECT=y
+CONFIG_NETFILTER_SYNPROXY=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_SET=m
+CONFIG_NF_TABLES_INET=y
+CONFIG_NF_TABLES_NETDEV=y
+CONFIG_NFT_NUMGEN=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_FLOW_OFFLOAD=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_CONNLIMIT=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_MASQ=m
+CONFIG_NFT_REDIR=m
+CONFIG_NFT_NAT=m
+# CONFIG_NFT_TUNNEL is not set
+CONFIG_NFT_OBJREF=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_QUOTA=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_REJECT_INET=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_FIB=m
+CONFIG_NFT_FIB_INET=m
+CONFIG_NFT_SOCKET=m
+# CONFIG_NFT_OSF is not set
+# CONFIG_NFT_TPROXY is not set
+CONFIG_NF_DUP_NETDEV=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
+CONFIG_NFT_FIB_NETDEV=m
+CONFIG_NF_FLOW_TABLE_INET=m
+CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_NAT=m
+CONFIG_NETFILTER_XT_TARGET_NETMAP=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CGROUP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_L2TP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_IPMAC=m
+CONFIG_IP_SET_HASH_MAC=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_FO=m
+CONFIG_IP_VS_OVF=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_MH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS MH scheduler
+#
+CONFIG_IP_VS_MH_TAB_INDEX=12
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_SOCKET_IPV4=m
+CONFIG_NF_TPROXY_IPV4=m
+CONFIG_NF_TABLES_IPV4=y
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_REJECT_IPV4=m
+CONFIG_NFT_DUP_IPV4=m
+CONFIG_NFT_FIB_IPV4=m
+CONFIG_NF_TABLES_ARP=y
+CONFIG_NF_FLOW_TABLE_IPV4=m
+CONFIG_NF_DUP_IPV4=m
+CONFIG_NF_LOG_ARP=m
+CONFIG_NF_LOG_IPV4=m
+CONFIG_NF_REJECT_IPV4=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_NF_NAT_MASQUERADE_IPV4=y
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NFT_MASQ_IPV4=m
+CONFIG_NFT_REDIR_IPV4=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SECURITY is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_SOCKET_IPV6=m
+CONFIG_NF_TPROXY_IPV6=m
+CONFIG_NF_TABLES_IPV6=y
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NFT_MASQ_IPV6=m
+CONFIG_NFT_REDIR_IPV6=m
+CONFIG_NFT_REJECT_IPV6=m
+CONFIG_NFT_DUP_IPV6=m
+CONFIG_NFT_FIB_IPV6=m
+CONFIG_NF_FLOW_TABLE_IPV6=m
+CONFIG_NF_DUP_IPV6=m
+CONFIG_NF_REJECT_IPV6=m
+CONFIG_NF_LOG_IPV6=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_NF_NAT_MASQUERADE_IPV6=y
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_SRH=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_IP6_NF_SECURITY is not set
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_DEFRAG_IPV6=m
+
+#
+# DECnet: Netfilter Configuration
+#
+CONFIG_DECNET_NF_GRABULATOR=m
+CONFIG_NF_TABLES_BRIDGE=y
+CONFIG_NFT_BRIDGE_REJECT=m
+CONFIG_NF_LOG_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_BPFILTER=y
+CONFIG_BPFILTER_UMH=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_TFRC_LIB=y
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_OBJCNT is not set
+CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
+# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
+# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
+CONFIG_SCTP_COOKIE_HMAC_MD5=y
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_INET_SCTP_DIAG=m
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+CONFIG_TIPC_MEDIA_IB=y
+CONFIG_TIPC_MEDIA_UDP=y
+CONFIG_TIPC_DIAG=m
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_L2TP=m
+# CONFIG_L2TP_DEBUGFS is not set
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_MRP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_NET_DSA=m
+CONFIG_NET_DSA_LEGACY=y
+CONFIG_NET_DSA_TAG_BRCM=y
+CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_EDSA=y
+CONFIG_NET_DSA_TAG_KSZ=y
+CONFIG_NET_DSA_TAG_LAN9303=y
+CONFIG_NET_DSA_TAG_MTK=y
+CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_NET_DSA_TAG_QCA=y
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_VLAN_8021Q_MVRP=y
+CONFIG_DECNET=m
+CONFIG_DECNET_ROUTER=y
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_X25=m
+CONFIG_LAPB=m
+CONFIG_PHONET=m
+CONFIG_6LOWPAN=m
+# CONFIG_6LOWPAN_DEBUGFS is not set
+CONFIG_6LOWPAN_NHC=m
+CONFIG_6LOWPAN_NHC_DEST=m
+CONFIG_6LOWPAN_NHC_FRAGMENT=m
+CONFIG_6LOWPAN_NHC_HOP=m
+CONFIG_6LOWPAN_NHC_IPV6=m
+CONFIG_6LOWPAN_NHC_MOBILITY=m
+CONFIG_6LOWPAN_NHC_ROUTING=m
+CONFIG_6LOWPAN_NHC_UDP=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
+CONFIG_6LOWPAN_GHC_UDP=m
+CONFIG_6LOWPAN_GHC_ICMPV6=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
+CONFIG_IEEE802154_SOCKET=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_CBS=m
+# CONFIG_NET_SCH_ETF is not set
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+# CONFIG_NET_SCH_SKBPRIO is not set
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+# CONFIG_NET_SCH_CAKE is not set
+CONFIG_NET_SCH_FQ=m
+CONFIG_NET_SCH_HHF=m
+CONFIG_NET_SCH_PIE=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+# CONFIG_NET_SCH_DEFAULT is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=m
+CONFIG_NET_CLS_BPF=m
+CONFIG_NET_CLS_FLOWER=m
+CONFIG_NET_CLS_MATCHALL=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_EMATCH_CANID=m
+CONFIG_NET_EMATCH_IPSET=m
+CONFIG_NET_EMATCH_IPT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_SAMPLE=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+CONFIG_NET_ACT_VLAN=m
+CONFIG_NET_ACT_BPF=m
+CONFIG_NET_ACT_CONNMARK=m
+CONFIG_NET_ACT_SKBMOD=m
+CONFIG_NET_ACT_IFE=m
+CONFIG_NET_ACT_TUNNEL_KEY=m
+CONFIG_NET_IFE_SKBMARK=m
+CONFIG_NET_IFE_SKBPRIO=m
+CONFIG_NET_IFE_SKBTCINDEX=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+CONFIG_DCB=y
+CONFIG_DNS_RESOLVER=y
+CONFIG_BATMAN_ADV=m
+# CONFIG_BATMAN_ADV_BATMAN_V is not set
+CONFIG_BATMAN_ADV_BLA=y
+CONFIG_BATMAN_ADV_DAT=y
+CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_BATMAN_ADV_DEBUGFS=y
+# CONFIG_BATMAN_ADV_DEBUG is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_OPENVSWITCH_GRE=m
+CONFIG_OPENVSWITCH_VXLAN=m
+CONFIG_OPENVSWITCH_GENEVE=m
+CONFIG_VSOCKETS=m
+CONFIG_VSOCKETS_DIAG=m
+CONFIG_VMWARE_VMCI_VSOCKETS=m
+CONFIG_VIRTIO_VSOCKETS=m
+CONFIG_VIRTIO_VSOCKETS_COMMON=m
+CONFIG_HYPERV_VSOCKETS=m
+CONFIG_NETLINK_DIAG=m
+CONFIG_MPLS=y
+CONFIG_NET_MPLS_GSO=m
+CONFIG_MPLS_ROUTING=m
+CONFIG_MPLS_IPTUNNEL=m
+CONFIG_NET_NSH=m
+CONFIG_HSR=m
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NET_L3_MASTER_DEV=y
+# CONFIG_NET_NCSI is not set
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_CGROUP_NET_PRIO=y
+CONFIG_CGROUP_NET_CLASSID=y
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_BQL=y
+CONFIG_BPF_JIT=y
+CONFIG_BPF_STREAM_PARSER=y
+CONFIG_NET_FLOW_LIMIT=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+CONFIG_AX25_DAMA_SLAVE=y
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_VXCAN=m
+CONFIG_CAN_SLCAN=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_JANZ_ICAN3=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_C_CAN_PCI=m
+CONFIG_CAN_CC770=m
+CONFIG_CAN_CC770_ISA=m
+CONFIG_CAN_CC770_PLATFORM=m
+CONFIG_CAN_IFI_CANFD=m
+CONFIG_CAN_M_CAN=m
+CONFIG_CAN_PEAK_PCIEFD=m
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+CONFIG_CAN_EMS_PCMCIA=m
+CONFIG_CAN_EMS_PCI=m
+CONFIG_CAN_PEAK_PCMCIA=m
+CONFIG_CAN_PEAK_PCI=m
+CONFIG_CAN_PEAK_PCIEC=y
+CONFIG_CAN_KVASER_PCI=m
+CONFIG_CAN_PLX_PCI=m
+CONFIG_CAN_SOFTING=m
+CONFIG_CAN_SOFTING_CS=m
+
+#
+# CAN SPI interfaces
+#
+CONFIG_CAN_HI311X=m
+CONFIG_CAN_MCP251X=m
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_8DEV_USB=m
+CONFIG_CAN_EMS_USB=m
+CONFIG_CAN_ESD_USB2=m
+CONFIG_CAN_GS_USB=m
+CONFIG_CAN_KVASER_USB=m
+CONFIG_CAN_MCBA_USB=m
+CONFIG_CAN_PEAK_USB=m
+# CONFIG_CAN_UCAN is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_BT=m
+CONFIG_BT_BREDR=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+CONFIG_BT_HS=y
+CONFIG_BT_LE=y
+CONFIG_BT_6LOWPAN=m
+CONFIG_BT_LEDS=y
+# CONFIG_BT_SELFTEST is not set
+CONFIG_BT_DEBUGFS=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_INTEL=m
+CONFIG_BT_BCM=m
+CONFIG_BT_RTL=m
+CONFIG_BT_QCA=m
+CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
+CONFIG_BT_HCIBTUSB_BCM=y
+CONFIG_BT_HCIBTUSB_RTL=y
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_SERDEV=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_NOKIA=m
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_INTEL=y
+CONFIG_BT_HCIUART_RTL=y
+CONFIG_BT_HCIUART_QCA=y
+CONFIG_BT_HCIUART_AG6XX=y
+CONFIG_BT_HCIUART_MRVL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_WILINK=m
+CONFIG_BT_MTKUART=m
+CONFIG_BT_HCIRSI=m
+CONFIG_AF_RXRPC=m
+CONFIG_AF_RXRPC_IPV6=y
+# CONFIG_AF_RXRPC_INJECT_LOSS is not set
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_RXKAD is not set
+CONFIG_AF_KCM=m
+CONFIG_STREAM_PARSER=y
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+CONFIG_NL80211_TESTMODE=y
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
+CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+CONFIG_CFG80211_CRDA_SUPPORT=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_CFG80211_WEXT_EXPORT=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_GPIO=m
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+CONFIG_CAIF=m
+# CONFIG_CAIF_DEBUG is not set
+CONFIG_CAIF_NETDEV=m
+CONFIG_CAIF_USB=m
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
+CONFIG_NFC=m
+CONFIG_NFC_DIGITAL=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_NCI_SPI=m
+CONFIG_NFC_NCI_UART=m
+CONFIG_NFC_HCI=m
+CONFIG_NFC_SHDLC=y
+
+#
+# Near Field Communication (NFC) devices
+#
+CONFIG_NFC_TRF7970A=m
+CONFIG_NFC_MEI_PHY=m
+CONFIG_NFC_SIM=m
+CONFIG_NFC_PORT100=m
+CONFIG_NFC_FDP=m
+CONFIG_NFC_FDP_I2C=m
+CONFIG_NFC_PN544=m
+CONFIG_NFC_PN544_I2C=m
+CONFIG_NFC_PN544_MEI=m
+CONFIG_NFC_PN533=m
+CONFIG_NFC_PN533_USB=m
+CONFIG_NFC_PN533_I2C=m
+CONFIG_NFC_MICROREAD=m
+CONFIG_NFC_MICROREAD_I2C=m
+CONFIG_NFC_MICROREAD_MEI=m
+CONFIG_NFC_MRVL=m
+CONFIG_NFC_MRVL_USB=m
+CONFIG_NFC_MRVL_UART=m
+CONFIG_NFC_MRVL_I2C=m
+CONFIG_NFC_MRVL_SPI=m
+CONFIG_NFC_ST21NFCA=m
+CONFIG_NFC_ST21NFCA_I2C=m
+CONFIG_NFC_ST_NCI=m
+CONFIG_NFC_ST_NCI_I2C=m
+CONFIG_NFC_ST_NCI_SPI=m
+CONFIG_NFC_NXP_NCI=m
+CONFIG_NFC_NXP_NCI_I2C=m
+CONFIG_NFC_S3FWRN5=m
+CONFIG_NFC_S3FWRN5_I2C=m
+CONFIG_NFC_ST95HF=m
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
+CONFIG_LWTUNNEL=y
+CONFIG_LWTUNNEL_BPF=y
+CONFIG_DST_CACHE=y
+CONFIG_GRO_CELLS=y
+CONFIG_NET_DEVLINK=m
+CONFIG_MAY_USE_DEVLINK=m
+CONFIG_FAILOVER=m
+CONFIG_HAVE_EBPF_JIT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_UEVENT_HELPER is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+
+#
+# Firmware loader
+#
+CONFIG_FW_LOADER=y
+CONFIG_EXTRA_FIRMWARE=""
+CONFIG_FW_LOADER_USER_HELPER=y
+# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
+CONFIG_WANT_DEV_COREDUMP=y
+CONFIG_ALLOW_DEV_COREDUMP=y
+CONFIG_DEV_COREDUMP=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
+CONFIG_TEST_ASYNC_DRIVER_PROBE=m
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_REGMAP_SPI=y
+CONFIG_REGMAP_SPMI=m
+CONFIG_REGMAP_W1=m
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGMAP_IRQ=y
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_DMA_FENCE_TRACE is not set
+# CONFIG_DMA_CMA is not set
+
+#
+# Bus devices
+#
+CONFIG_CONNECTOR=m
+# CONFIG_GNSS is not set
+CONFIG_MTD=m
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+CONFIG_MTD_CMDLINE_PARTS=m
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# Partition parsers
+#
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_SM_FTL=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_SWAP=m
+# CONFIG_MTD_PARTITIONED_MASTER is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_AMD76XROM=m
+CONFIG_MTD_ICHXROM=m
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_L440GX=m
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_GPIO_ADDR=m
+CONFIG_MTD_INTEL_VR_NOR=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_LATCH_ADDR=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_DATAFLASH=m
+CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
+CONFIG_MTD_DATAFLASH_OTP=y
+CONFIG_MTD_M25P80=m
+CONFIG_MTD_MCHP23K256=m
+CONFIG_MTD_SST25L=m
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+CONFIG_MTD_DOCG3=m
+CONFIG_BCH_CONST_M=14
+CONFIG_BCH_CONST_T=4
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_ONENAND_OTP=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_BCH=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_SM_COMMON=m
+CONFIG_MTD_NAND_DENALI=m
+CONFIG_MTD_NAND_DENALI_PCI=m
+CONFIG_MTD_NAND_GPIO=m
+CONFIG_MTD_NAND_RICOH=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x0
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_DOCG4=m
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_SPI_NAND is not set
+
+#
+# LPDDR & LPDDR2 PCM memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+CONFIG_MTD_SPI_NOR=m
+CONFIG_MTD_MT81xx_NOR=m
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
+CONFIG_SPI_INTEL_SPI=m
+CONFIG_SPI_INTEL_SPI_PCI=m
+CONFIG_SPI_INTEL_SPI_PLATFORM=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_FASTMAP=y
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_BLOCK=y
+# CONFIG_OF is not set
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+CONFIG_PARPORT_PC_FIFO=y
+CONFIG_PARPORT_PC_SUPERIO=y
+CONFIG_PARPORT_PC_PCMCIA=m
+CONFIG_PARPORT_AX88796=m
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG_MESSAGES is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_NULL_BLK is not set
+CONFIG_BLK_DEV_FD=m
+CONFIG_CDROM=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_ZRAM=m
+CONFIG_ZRAM_WRITEBACK=y
+# CONFIG_ZRAM_MEMORY_TRACKING is not set
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_SKD=m
+CONFIG_BLK_DEV_SX8=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+CONFIG_CDROM_PKTCDVD_WCACHE=y
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_VIRTIO_BLK_SCSI is not set
+CONFIG_BLK_DEV_RBD=m
+CONFIG_BLK_DEV_RSXX=m
+
+#
+# NVME Support
+#
+CONFIG_NVME_CORE=y
+CONFIG_BLK_DEV_NVME=y
+# CONFIG_NVME_MULTIPATH is not set
+CONFIG_NVME_FABRICS=m
+CONFIG_NVME_RDMA=m
+CONFIG_NVME_FC=m
+CONFIG_NVME_TARGET=m
+CONFIG_NVME_TARGET_LOOP=m
+CONFIG_NVME_TARGET_RDMA=m
+CONFIG_NVME_TARGET_FC=m
+CONFIG_NVME_TARGET_FCLOOP=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_AD525X_DPOT_SPI=m
+# CONFIG_DUMMY_IRQ is not set
+CONFIG_IBM_ASM=m
+CONFIG_PHANTOM=m
+CONFIG_SGI_IOC4=m
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_HP_ILO=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_ISL29020=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_BH1770=m
+CONFIG_SENSORS_APDS990X=m
+CONFIG_HMC6352=m
+CONFIG_DS1682=m
+CONFIG_VMWARE_BALLOON=m
+CONFIG_USB_SWITCH_FSA9480=m
+CONFIG_LATTICE_ECP3_CONFIG=m
+CONFIG_SRAM=y
+CONFIG_PCI_ENDPOINT_TEST=m
+CONFIG_MISC_RTSX=m
+CONFIG_C2PORT=m
+CONFIG_C2PORT_DURAMAR_2150=m
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_AT25=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_EEPROM_93XX46=m
+CONFIG_EEPROM_IDT_89HPESX=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_TI_ST=m
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module (requires I2C)
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_INTEL_MEI=y
+CONFIG_INTEL_MEI_ME=y
+CONFIG_INTEL_MEI_TXE=m
+CONFIG_VMWARE_VMCI=m
+
+#
+# Intel MIC & related support
+#
+
+#
+# Intel MIC Bus Driver
+#
+CONFIG_INTEL_MIC_BUS=m
+
+#
+# SCIF Bus Driver
+#
+CONFIG_SCIF_BUS=m
+
+#
+# VOP Bus Driver
+#
+CONFIG_VOP_BUS=m
+
+#
+# Intel MIC Host Driver
+#
+CONFIG_INTEL_MIC_HOST=m
+
+#
+# Intel MIC Card Driver
+#
+CONFIG_INTEL_MIC_CARD=m
+
+#
+# SCIF Driver
+#
+CONFIG_SCIF=m
+
+#
+# Intel MIC Coprocessor State Management (COSM) Drivers
+#
+CONFIG_MIC_COSM=m
+
+#
+# VOP Driver
+#
+CONFIG_VOP=m
+CONFIG_VHOST_RING=m
+CONFIG_GENWQE=m
+CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
+CONFIG_ECHO=m
+CONFIG_MISC_RTSX_PCI=m
+CONFIG_MISC_RTSX_USB=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_NETLINK=y
+# CONFIG_SCSI_MQ_DEFAULT is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_HPSA=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_3W_SAS=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+CONFIG_SCSI_MVSAS_TASKLET=y
+CONFIG_SCSI_MVUMI=m
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_ARCMSR=m
+CONFIG_SCSI_ESAS2R=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+CONFIG_MEGARAID_LEGACY=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_MPT3SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+CONFIG_SCSI_MPT3SAS_MAX_SGE=128
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_SMARTPQI=m
+CONFIG_SCSI_UFSHCD=m
+CONFIG_SCSI_UFSHCD_PCI=m
+CONFIG_SCSI_UFS_DWC_TC_PCI=m
+CONFIG_SCSI_UFSHCD_PLATFORM=m
+CONFIG_SCSI_UFS_DWC_TC_PLATFORM=m
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=m
+CONFIG_SCSI_FLASHPOINT=y
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_HYPERV_STORAGE=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+CONFIG_FCOE=m
+CONFIG_FCOE_FNIC=m
+CONFIG_SCSI_SNIC=m
+# CONFIG_SCSI_SNIC_DEBUG_FS is not set
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_TCM_QLA2XXX=m
+# CONFIG_TCM_QLA2XXX_DEBUG is not set
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_QEDI=m
+CONFIG_QEDF=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_AM53C974=m
+CONFIG_SCSI_WD719X=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_PMCRAID=m
+CONFIG_SCSI_PM8001=m
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_CHELSIO_FCOE=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=y
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=m
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_ZPODD=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=m
+CONFIG_SATA_MOBILE_LPM_POLICY=0
+CONFIG_SATA_AHCI_PLATFORM=m
+CONFIG_SATA_INIC162X=m
+CONFIG_SATA_ACARD_AHCI=m
+CONFIG_SATA_SIL24=m
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=m
+CONFIG_SATA_QSTOR=m
+CONFIG_SATA_SX4=m
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=m
+CONFIG_SATA_DWC=m
+# CONFIG_SATA_DWC_OLD_DMA is not set
+# CONFIG_SATA_DWC_DEBUG is not set
+CONFIG_SATA_MV=m
+CONFIG_SATA_NV=m
+CONFIG_SATA_PROMISE=m
+CONFIG_SATA_SIL=m
+CONFIG_SATA_SIS=m
+CONFIG_SATA_SVW=m
+CONFIG_SATA_ULI=m
+CONFIG_SATA_VIA=m
+CONFIG_SATA_VITESSE=m
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=m
+CONFIG_PATA_AMD=m
+CONFIG_PATA_ARTOP=m
+CONFIG_PATA_ATIIXP=m
+CONFIG_PATA_ATP867X=m
+CONFIG_PATA_CMD64X=m
+CONFIG_PATA_CYPRESS=m
+CONFIG_PATA_EFAR=m
+CONFIG_PATA_HPT366=m
+CONFIG_PATA_HPT37X=m
+CONFIG_PATA_HPT3X2N=m
+CONFIG_PATA_HPT3X3=m
+CONFIG_PATA_HPT3X3_DMA=y
+CONFIG_PATA_IT8213=m
+CONFIG_PATA_IT821X=m
+CONFIG_PATA_JMICRON=m
+CONFIG_PATA_MARVELL=m
+CONFIG_PATA_NETCELL=m
+CONFIG_PATA_NINJA32=m
+CONFIG_PATA_NS87415=m
+CONFIG_PATA_OLDPIIX=m
+CONFIG_PATA_OPTIDMA=m
+CONFIG_PATA_PDC2027X=m
+CONFIG_PATA_PDC_OLD=m
+CONFIG_PATA_RADISYS=m
+CONFIG_PATA_RDC=m
+CONFIG_PATA_SCH=m
+CONFIG_PATA_SERVERWORKS=m
+CONFIG_PATA_SIL680=m
+CONFIG_PATA_SIS=m
+CONFIG_PATA_TOSHIBA=m
+CONFIG_PATA_TRIFLEX=m
+CONFIG_PATA_VIA=m
+CONFIG_PATA_WINBOND=m
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_CMD640_PCI=m
+CONFIG_PATA_MPIIX=m
+CONFIG_PATA_NS87410=m
+CONFIG_PATA_OPTI=m
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_RZ1000=m
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=m
+CONFIG_ATA_GENERIC=m
+CONFIG_PATA_LEGACY=m
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_MD_CLUSTER=m
+CONFIG_BCACHE=m
+# CONFIG_BCACHE_DEBUG is not set
+# CONFIG_BCACHE_CLOSURES_DEBUG is not set
+CONFIG_BLK_DEV_DM_BUILTIN=y
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_MQ_DEFAULT is not set
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
+CONFIG_DM_BIO_PRISON=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_UNSTRIPED=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_CACHE_SMQ=m
+CONFIG_DM_WRITECACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+# CONFIG_DM_VERITY_FEC is not set
+CONFIG_DM_SWITCH=m
+CONFIG_DM_LOG_WRITES=m
+CONFIG_DM_INTEGRITY=m
+CONFIG_DM_ZONED=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_TCM_USER2=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_ISCSI_TARGET_CXGB4=m
+CONFIG_SBP_TARGET=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+CONFIG_FUSION_LOGGING=y
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=m
+CONFIG_NETDEVICES=y
+CONFIG_MII=m
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_NET_FC=y
+CONFIG_IFB=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
+CONFIG_VXLAN=m
+CONFIG_GENEVE=m
+CONFIG_GTP=m
+CONFIG_MACSEC=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_NTB_NETDEV is not set
+CONFIG_RIONET=m
+CONFIG_RIONET_TX_SIZE=128
+CONFIG_RIONET_RX_SIZE=128
+CONFIG_TUN=m
+CONFIG_TAP=m
+# CONFIG_TUN_VNET_CROSS_LE is not set
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_NLMON=m
+CONFIG_NET_VRF=m
+CONFIG_VSOCKMON=m
+CONFIG_SUNGEM_PHY=m
+CONFIG_ARCNET=m
+CONFIG_ARCNET_1201=m
+CONFIG_ARCNET_1051=m
+CONFIG_ARCNET_RAW=m
+CONFIG_ARCNET_CAP=m
+CONFIG_ARCNET_COM90xx=m
+CONFIG_ARCNET_COM90xxIO=m
+CONFIG_ARCNET_RIM_I=m
+CONFIG_ARCNET_COM20020=m
+CONFIG_ARCNET_COM20020_PCI=m
+CONFIG_ARCNET_COM20020_CS=m
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+CONFIG_ATM_NICSTAR_USE_SUNI=y
+CONFIG_ATM_NICSTAR_USE_IDT77105=y
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+CONFIG_ATM_FORE200E_USE_TASKLET=y
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+CONFIG_ATM_HE_USE_SUNI=y
+CONFIG_ATM_SOLOS=m
+
+#
+# CAIF transport drivers
+#
+CONFIG_CAIF_TTY=m
+CONFIG_CAIF_SPI_SLAVE=m
+CONFIG_CAIF_SPI_SYNC=y
+CONFIG_CAIF_HSI=m
+CONFIG_CAIF_VIRTIO=m
+
+#
+# Distributed Switch Architecture drivers
+#
+CONFIG_B53=m
+CONFIG_B53_SPI_DRIVER=m
+CONFIG_B53_MDIO_DRIVER=m
+CONFIG_B53_MMAP_DRIVER=m
+CONFIG_B53_SRAB_DRIVER=m
+# CONFIG_NET_DSA_BCM_SF2 is not set
+CONFIG_NET_DSA_LOOP=m
+CONFIG_NET_DSA_MT7530=m
+CONFIG_NET_DSA_MV88E6060=m
+CONFIG_MICROCHIP_KSZ=m
+CONFIG_MICROCHIP_KSZ_SPI_DRIVER=m
+CONFIG_NET_DSA_MV88E6XXX=m
+CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
+CONFIG_NET_DSA_MV88E6XXX_PTP=y
+CONFIG_NET_DSA_QCA8K=m
+# CONFIG_NET_DSA_REALTEK_SMI is not set
+CONFIG_NET_DSA_SMSC_LAN9303=m
+CONFIG_NET_DSA_SMSC_LAN9303_I2C=m
+CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_AGERE=y
+CONFIG_ET131X=m
+CONFIG_NET_VENDOR_ALACRITECH=y
+CONFIG_SLICOSS=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_ALTERA_TSE=m
+CONFIG_NET_VENDOR_AMAZON=y
+CONFIG_ENA_ETHERNET=m
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_PCNET32=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_AMD_XGBE=m
+CONFIG_AMD_XGBE_DCB=y
+CONFIG_AMD_XGBE_HAVE_ECC=y
+CONFIG_NET_VENDOR_AQUANTIA=y
+CONFIG_AQTION=m
+CONFIG_NET_VENDOR_ARC=y
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_ALX=m
+CONFIG_NET_VENDOR_AURORA=y
+CONFIG_AURORA_NB8800=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+# CONFIG_BCMGENET is not set
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_TIGON3_HWMON=y
+CONFIG_BNX2X=m
+CONFIG_BNX2X_SRIOV=y
+# CONFIG_SYSTEMPORT is not set
+CONFIG_BNXT=m
+CONFIG_BNXT_SRIOV=y
+CONFIG_BNXT_FLOWER_OFFLOAD=y
+CONFIG_BNXT_DCB=y
+CONFIG_BNXT_HWMON=y
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_VENDOR_CADENCE=y
+CONFIG_MACB=m
+CONFIG_MACB_USE_HWSTAMP=y
+CONFIG_MACB_PCI=m
+CONFIG_NET_VENDOR_CAVIUM=y
+CONFIG_THUNDER_NIC_PF=m
+CONFIG_THUNDER_NIC_VF=m
+CONFIG_THUNDER_NIC_BGX=m
+CONFIG_THUNDER_NIC_RGX=m
+CONFIG_CAVIUM_PTP=m
+CONFIG_LIQUIDIO=m
+CONFIG_LIQUIDIO_VF=m
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4_DCB=y
+# CONFIG_CHELSIO_T4_FCOE is not set
+CONFIG_CHELSIO_T4VF=m
+CONFIG_CHELSIO_LIB=m
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+# CONFIG_NET_VENDOR_CORTINA is not set
+CONFIG_CX_ECAT=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+CONFIG_TULIP_MWI=y
+CONFIG_TULIP_MMIO=y
+CONFIG_TULIP_NAPI=y
+CONFIG_TULIP_NAPI_HW_MITIGATION=y
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_BE2NET_HWMON=y
+CONFIG_BE2NET_BE2=y
+CONFIG_BE2NET_BE3=y
+CONFIG_BE2NET_LANCER=y
+CONFIG_BE2NET_SKYHAWK=y
+CONFIG_NET_VENDOR_EZCHIP=y
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_NET_VENDOR_HP=y
+CONFIG_HP100=m
+CONFIG_NET_VENDOR_HUAWEI=y
+CONFIG_HINIC=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_E1000E_HWTS=y
+CONFIG_IGB=m
+CONFIG_IGB_HWMON=y
+CONFIG_IGB_DCA=y
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBE_DCA=y
+CONFIG_IXGBE_DCB=y
+CONFIG_IXGBEVF=m
+CONFIG_I40E=m
+CONFIG_I40E_DCB=y
+CONFIG_I40EVF=m
+CONFIG_ICE=m
+CONFIG_FM10K=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_MVMDIO=m
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKGE_GENESIS=y
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_EN_DCB=y
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_MLX4_CORE_GEN2=y
+CONFIG_MLX5_CORE=m
+CONFIG_MLX5_ACCEL=y
+CONFIG_MLX5_FPGA=y
+# CONFIG_MLX5_CORE_EN is not set
+CONFIG_MLXSW_CORE=m
+CONFIG_MLXSW_CORE_HWMON=y
+CONFIG_MLXSW_CORE_THERMAL=y
+CONFIG_MLXSW_PCI=m
+CONFIG_MLXSW_I2C=m
+CONFIG_MLXSW_SWITCHIB=m
+CONFIG_MLXSW_SWITCHX2=m
+CONFIG_MLXSW_SPECTRUM=m
+CONFIG_MLXSW_SPECTRUM_DCB=y
+CONFIG_MLXSW_MINIMAL=m
+CONFIG_MLXFW=m
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MICROCHIP=y
+CONFIG_ENC28J60=m
+# CONFIG_ENC28J60_WRITEVERIFY is not set
+CONFIG_ENCX24J600=m
+CONFIG_LAN743X=m
+CONFIG_NET_VENDOR_MICROSEMI=y
+CONFIG_MSCC_OCELOT_SWITCH=m
+CONFIG_MSCC_OCELOT_SWITCH_OCELOT=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_NETERION=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_NETRONOME=y
+CONFIG_NFP=m
+# CONFIG_NFP_APP_FLOWER is not set
+CONFIG_NFP_APP_ABM_NIC=y
+# CONFIG_NFP_DEBUG is not set
+CONFIG_NET_VENDOR_NI=y
+CONFIG_NET_VENDOR_8390=y
+CONFIG_PCMCIA_AXNET=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_ETHOC=m
+CONFIG_NET_VENDOR_PACKET_ENGINES=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLCNIC_SRIOV=y
+CONFIG_QLCNIC_DCB=y
+CONFIG_QLCNIC_HWMON=y
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_QED=m
+CONFIG_QED_LL2=y
+CONFIG_QED_SRIOV=y
+CONFIG_QEDE=m
+CONFIG_QED_RDMA=y
+CONFIG_QED_ISCSI=y
+CONFIG_QED_FCOE=y
+CONFIG_QED_OOO=y
+CONFIG_NET_VENDOR_QUALCOMM=y
+CONFIG_QCOM_EMAC=m
+CONFIG_RMNET=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_ATP=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+CONFIG_8139TOO_TUNE_TWISTER=y
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RENESAS=y
+CONFIG_NET_VENDOR_ROCKER=y
+CONFIG_ROCKER=m
+CONFIG_NET_VENDOR_SAMSUNG=y
+CONFIG_SXGBE_ETH=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_NET_VENDOR_SOLARFLARE=y
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_SFC_SRIOV=y
+CONFIG_SFC_MCDI_LOGGING=y
+CONFIG_SFC_FALCON=m
+CONFIG_SFC_FALCON_MTD=y
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+CONFIG_SMSC911X=m
+CONFIG_SMSC9420=m
+# CONFIG_NET_VENDOR_SOCIONEXT is not set
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=m
+CONFIG_DWMAC_GENERIC=m
+CONFIG_STMMAC_PCI=m
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_SYNOPSYS=y
+CONFIG_DWC_XLGMAC=m
+CONFIG_DWC_XLGMAC_PCI=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TI_CPSW_ALE=m
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_WIZNET=y
+CONFIG_WIZNET_W5100=m
+CONFIG_WIZNET_W5300=m
+# CONFIG_WIZNET_BUS_DIRECT is not set
+# CONFIG_WIZNET_BUS_INDIRECT is not set
+CONFIG_WIZNET_BUS_ANY=y
+CONFIG_WIZNET_W5100_SPI=m
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=m
+CONFIG_DEFXX=m
+# CONFIG_DEFXX_MMIO is not set
+CONFIG_SKFP=m
+CONFIG_HIPPI=y
+CONFIG_ROADRUNNER=m
+CONFIG_ROADRUNNER_LARGE_RINGS=y
+CONFIG_NET_SB1000=m
+CONFIG_MDIO_DEVICE=m
+CONFIG_MDIO_BUS=m
+# CONFIG_MDIO_BCM_UNIMAC is not set
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_CAVIUM=m
+CONFIG_MDIO_GPIO=m
+CONFIG_MDIO_I2C=m
+CONFIG_MDIO_MSCC_MIIM=m
+CONFIG_MDIO_THUNDER=m
+CONFIG_PHYLINK=m
+CONFIG_PHYLIB=m
+CONFIG_SWPHY=y
+CONFIG_LED_TRIGGER_PHY=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_SFP=m
+CONFIG_AMD_PHY=m
+CONFIG_AQUANTIA_PHY=m
+# CONFIG_AX88796B_PHY is not set
+CONFIG_AT803X_PHY=m
+CONFIG_BCM7XXX_PHY=m
+CONFIG_BCM87XX_PHY=m
+CONFIG_BCM_NET_PHYLIB=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_CORTINA_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_DP83822_PHY=m
+CONFIG_DP83TC811_PHY=m
+CONFIG_DP83848_PHY=m
+CONFIG_DP83867_PHY=m
+CONFIG_FIXED_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_INTEL_XWAY_PHY=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_MARVELL_10G_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MICROCHIP_PHY=m
+CONFIG_MICROCHIP_T1_PHY=m
+CONFIG_MICROSEMI_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_RENESAS_PHY=m
+CONFIG_ROCKCHIP_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_STE10XP=m
+CONFIG_TERANETICS_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_XILINX_GMII2RGMII=m
+CONFIG_MICREL_KS8995MA=m
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+
+#
+# Host-side USB support is needed for USB Network Adapter support
+#
+CONFIG_USB_NET_DRIVERS=m
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+CONFIG_USB_LAN78XX=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_AX88179_178A=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_HUAWEI_CDC_NCM=m
+CONFIG_USB_NET_CDC_MBIM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SR9700=m
+CONFIG_USB_NET_SR9800=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_QMI_WWAN=m
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_CDC_PHONET=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_USB_NET_CH9200=m
+CONFIG_WLAN=y
+CONFIG_WLAN_VENDOR_ADMTEK=y
+CONFIG_ADM8211=m
+CONFIG_ATH_COMMON=m
+CONFIG_WLAN_VENDOR_ATH=y
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+CONFIG_ATH9K_AHB=y
+# CONFIG_ATH9K_DEBUGFS is not set
+CONFIG_ATH9K_DYNACK=y
+CONFIG_ATH9K_WOW=y
+CONFIG_ATH9K_RFKILL=y
+CONFIG_ATH9K_CHANNEL_CONTEXT=y
+CONFIG_ATH9K_PCOEM=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+CONFIG_ATH9K_HWRNG=y
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+# CONFIG_ATH6KL_DEBUG is not set
+# CONFIG_ATH6KL_TRACING is not set
+CONFIG_AR5523=m
+CONFIG_WIL6210=m
+CONFIG_WIL6210_ISR_COR=y
+CONFIG_WIL6210_TRACING=y
+CONFIG_WIL6210_DEBUGFS=y
+CONFIG_ATH10K=m
+CONFIG_ATH10K_CE=y
+CONFIG_ATH10K_PCI=m
+CONFIG_ATH10K_SDIO=m
+CONFIG_ATH10K_USB=m
+# CONFIG_ATH10K_DEBUG is not set
+# CONFIG_ATH10K_DEBUGFS is not set
+# CONFIG_ATH10K_TRACING is not set
+CONFIG_WCN36XX=m
+# CONFIG_WCN36XX_DEBUGFS is not set
+CONFIG_WLAN_VENDOR_ATMEL=y
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_WLAN_VENDOR_BROADCOM=y
+CONFIG_B43=m
+CONFIG_B43_BCMA=y
+CONFIG_B43_SSB=y
+CONFIG_B43_BUSES_BCMA_AND_SSB=y
+# CONFIG_B43_BUSES_BCMA is not set
+# CONFIG_B43_BUSES_SSB is not set
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_BCMA_PIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_G=y
+CONFIG_B43_PHY_N=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMSMAC=m
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_PROTO_BCDC=y
+CONFIG_BRCMFMAC_PROTO_MSGBUF=y
+CONFIG_BRCMFMAC_SDIO=y
+CONFIG_BRCMFMAC_USB=y
+CONFIG_BRCMFMAC_PCIE=y
+CONFIG_BRCM_TRACING=y
+# CONFIG_BRCMDBG is not set
+CONFIG_WLAN_VENDOR_CISCO=y
+CONFIG_AIRO=m
+CONFIG_AIRO_CS=m
+CONFIG_WLAN_VENDOR_INTEL=y
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_IWLWIFI=m
+CONFIG_IWLWIFI_LEDS=y
+CONFIG_IWLDVM=m
+CONFIG_IWLMVM=m
+CONFIG_IWLWIFI_OPMODE_MODULAR=y
+CONFIG_IWLWIFI_BCAST_FILTERING=y
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+CONFIG_IWLWIFI_DEVICE_TRACING=y
+CONFIG_WLAN_VENDOR_INTERSIL=y
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_HERMES=m
+CONFIG_HERMES_PRISM=y
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCI_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ORINOCO_USB=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_SPI=m
+CONFIG_P54_SPI_DEFAULT_EEPROM=y
+CONFIG_P54_LEDS=y
+CONFIG_PRISM54=m
+CONFIG_WLAN_VENDOR_MARVELL=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_MESH=y
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
+CONFIG_MWL8K=m
+CONFIG_WLAN_VENDOR_MEDIATEK=y
+CONFIG_MT7601U=m
+CONFIG_MT76_CORE=m
+CONFIG_MT76_LEDS=y
+CONFIG_MT76x2_COMMON=m
+# CONFIG_MT76x0U is not set
+CONFIG_MT76x2E=m
+# CONFIG_MT76x2U is not set
+CONFIG_WLAN_VENDOR_RALINK=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2800PCI_RT3290=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT3573=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_RT55XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2800_LIB_MMIO=m
+CONFIG_RT2X00_LIB_MMIO=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_WLAN_VENDOR_REALTEK=y
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_RTL_CARDS=m
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8723AE=m
+CONFIG_RTL8723BE=m
+CONFIG_RTL8188EE=m
+CONFIG_RTL8192EE=m
+CONFIG_RTL8821AE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTLWIFI_PCI=m
+CONFIG_RTLWIFI_USB=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL8192C_COMMON=m
+CONFIG_RTL8723_COMMON=m
+CONFIG_RTLBTCOEXIST=m
+CONFIG_RTL8XXXU=m
+CONFIG_RTL8XXXU_UNTESTED=y
+CONFIG_WLAN_VENDOR_RSI=y
+CONFIG_RSI_91X=m
+# CONFIG_RSI_DEBUGFS is not set
+CONFIG_RSI_SDIO=m
+CONFIG_RSI_USB=m
+CONFIG_RSI_COEX=y
+CONFIG_WLAN_VENDOR_ST=y
+CONFIG_CW1200=m
+CONFIG_CW1200_WLAN_SDIO=m
+CONFIG_CW1200_WLAN_SPI=m
+CONFIG_WLAN_VENDOR_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SPI=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WL18XX=m
+CONFIG_WLCORE=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_WILINK_PLATFORM_DATA=y
+CONFIG_WLAN_VENDOR_ZYDAS=y
+CONFIG_USB_ZD1201=m
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_WLAN_VENDOR_QUANTENNA=y
+CONFIG_QTNFMAC=m
+CONFIG_QTNFMAC_PEARL_PCIE=m
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_PCMCIA_WL3501=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_USB_NET_RNDIS_WLAN=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+CONFIG_LANMEDIA=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+CONFIG_HDLC_X25=m
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+CONFIG_PC300TOO=m
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+CONFIG_DSCC4_PCISYNC=y
+CONFIG_DSCC4_PCI_RST=y
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_LAPBETHER=m
+CONFIG_X25_ASY=m
+CONFIG_SBNI=m
+CONFIG_SBNI_MULTILINE=y
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_IEEE802154_FAKELB=m
+CONFIG_IEEE802154_AT86RF230=m
+# CONFIG_IEEE802154_AT86RF230_DEBUGFS is not set
+CONFIG_IEEE802154_MRF24J40=m
+CONFIG_IEEE802154_CC2520=m
+CONFIG_IEEE802154_ATUSB=m
+CONFIG_IEEE802154_ADF7242=m
+CONFIG_IEEE802154_CA8210=m
+# CONFIG_IEEE802154_CA8210_DEBUGFS is not set
+CONFIG_IEEE802154_MCR20A=m
+# CONFIG_IEEE802154_HWSIM is not set
+CONFIG_VMXNET3=m
+CONFIG_FUJITSU_ES=m
+CONFIG_THUNDERBOLT_NET=m
+CONFIG_HYPERV_NET=m
+CONFIG_NETDEVSIM=m
+CONFIG_NET_FAILOVER=m
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+CONFIG_ISDN_PPP_BSDCOMP=m
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+CONFIG_ISDN_X25=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+# CONFIG_HISAX_NO_SENDCOMPLETE is not set
+# CONFIG_HISAX_NO_LLC is not set
+# CONFIG_HISAX_NO_KEYPAD is not set
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+CONFIG_ISDN_CAPI=m
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPIDRV=m
+# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+CONFIG_ISDN_DRV_GIGASET=m
+CONFIG_GIGASET_CAPI=y
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+CONFIG_GIGASET_M101=m
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+CONFIG_NVM=y
+CONFIG_NVM_PBLK=m
+# CONFIG_NVM_PBLK_DEBUG is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_LEDS=y
+CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=m
+CONFIG_INPUT_MATRIXKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADC=m
+CONFIG_KEYBOARD_ADP5588=m
+CONFIG_KEYBOARD_ADP5589=m
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+CONFIG_KEYBOARD_DLINK_DIR685=m
+CONFIG_KEYBOARD_LKKBD=m
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_TCA6416=m
+CONFIG_KEYBOARD_TCA8418=m
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_LM8323=m
+CONFIG_KEYBOARD_LM8333=m
+CONFIG_KEYBOARD_MAX7359=m
+CONFIG_KEYBOARD_MCS=m
+CONFIG_KEYBOARD_MPR121=m
+CONFIG_KEYBOARD_NEWTON=m
+CONFIG_KEYBOARD_OPENCORES=m
+CONFIG_KEYBOARD_SAMSUNG=m
+CONFIG_KEYBOARD_STOWAWAY=m
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_TM2_TOUCHKEY=m
+CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_CROS_EC=m
+CONFIG_KEYBOARD_MTK_PMIC=m
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_BYD=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
+CONFIG_MOUSE_PS2_CYPRESS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_PS2_FOCALTECH=y
+# CONFIG_MOUSE_PS2_VMMOUSE is not set
+CONFIG_MOUSE_PS2_SMBUS=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_CYAPA=m
+CONFIG_MOUSE_ELAN_I2C=m
+CONFIG_MOUSE_ELAN_I2C_I2C=y
+CONFIG_MOUSE_ELAN_I2C_SMBUS=y
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_AS5011=m
+# CONFIG_JOYSTICK_JOYDUMP is not set
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_JOYSTICK_WALKERA0701=m
+CONFIG_JOYSTICK_PSXPAD_SPI=m
+CONFIG_JOYSTICK_PSXPAD_SPI_FF=y
+CONFIG_JOYSTICK_PXRC=m
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_HANWANG=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_PEGASUS=m
+CONFIG_TABLET_SERIAL_WACOM4=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_PROPERTIES=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+CONFIG_TOUCHSCREEN_AD7877=m
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879_I2C=m
+CONFIG_TOUCHSCREEN_AD7879_SPI=m
+# CONFIG_TOUCHSCREEN_ADC is not set
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
+CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
+CONFIG_TOUCHSCREEN_BU21013=m
+# CONFIG_TOUCHSCREEN_BU21029 is not set
+CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=m
+CONFIG_TOUCHSCREEN_CY8CTMG110=m
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+CONFIG_TOUCHSCREEN_CYTTSP_SPI=m
+CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m
+CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m
+CONFIG_TOUCHSCREEN_CYTTSP4_SPI=m
+CONFIG_TOUCHSCREEN_DA9052=m
+CONFIG_TOUCHSCREEN_DYNAPRO=m
+CONFIG_TOUCHSCREEN_HAMPSHIRE=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m
+CONFIG_TOUCHSCREEN_EXC3000=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_GOODIX=m
+CONFIG_TOUCHSCREEN_HIDEEP=m
+CONFIG_TOUCHSCREEN_ILI210X=m
+CONFIG_TOUCHSCREEN_S6SY761=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_EKTF2127=m
+CONFIG_TOUCHSCREEN_ELAN=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+CONFIG_TOUCHSCREEN_WACOM_I2C=m
+CONFIG_TOUCHSCREEN_MAX11801=m
+CONFIG_TOUCHSCREEN_MCS5000=m
+CONFIG_TOUCHSCREEN_MMS114=m
+CONFIG_TOUCHSCREEN_MELFAS_MIP4=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
+CONFIG_TOUCHSCREEN_WDT87XX_I2C=m
+CONFIG_TOUCHSCREEN_WM831X=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_MC13783=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_TSC_SERIO=m
+CONFIG_TOUCHSCREEN_TSC200X_CORE=m
+CONFIG_TOUCHSCREEN_TSC2004=m
+CONFIG_TOUCHSCREEN_TSC2005=m
+CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_TOUCHSCREEN_TSC2007_IIO=y
+CONFIG_TOUCHSCREEN_PCAP=m
+CONFIG_TOUCHSCREEN_RM_TS=m
+CONFIG_TOUCHSCREEN_SILEAD=m
+CONFIG_TOUCHSCREEN_SIS_I2C=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_TOUCHSCREEN_STMFTS=m
+CONFIG_TOUCHSCREEN_SUR40=m
+CONFIG_TOUCHSCREEN_SURFACE3_SPI=m
+CONFIG_TOUCHSCREEN_SX8654=m
+CONFIG_TOUCHSCREEN_TPS6507X=m
+CONFIG_TOUCHSCREEN_ZET6223=m
+CONFIG_TOUCHSCREEN_ZFORCE=m
+CONFIG_TOUCHSCREEN_ROHM_BU21023=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_88PM80X_ONKEY=m
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_AD714X_SPI=m
+CONFIG_INPUT_ARIZONA_HAPTICS=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_E3X0_BUTTON=m
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_MAX77693_HAPTIC=m
+CONFIG_INPUT_MC13783_PWRBUTTON=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_GP2A=m
+CONFIG_INPUT_GPIO_BEEPER=m
+CONFIG_INPUT_GPIO_DECODER=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_KXTJ9_POLLED_MODE=y
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_REGULATOR_HAPTIC=m
+CONFIG_INPUT_RETU_PWRBUTTON=m
+CONFIG_INPUT_AXP20X_PEK=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF50633_PMU=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_PWM_BEEPER=m
+CONFIG_INPUT_PWM_VIBRA=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_DA9052_ONKEY=m
+CONFIG_INPUT_DA9063_ONKEY=m
+CONFIG_INPUT_WM831X_ON=m
+CONFIG_INPUT_PCAP=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_ADXL34X_SPI=m
+CONFIG_INPUT_IMS_PCU=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
+CONFIG_INPUT_SOC_BUTTON_ARRAY=m
+CONFIG_INPUT_DRV260X_HAPTICS=m
+CONFIG_INPUT_DRV2665_HAPTICS=m
+CONFIG_INPUT_DRV2667_HAPTICS=m
+CONFIG_INPUT_RAVE_SP_PWRBUTTON=m
+CONFIG_RMI4_CORE=m
+CONFIG_RMI4_I2C=m
+CONFIG_RMI4_SPI=m
+CONFIG_RMI4_SMB=m
+CONFIG_RMI4_F03=y
+CONFIG_RMI4_F03_SERIO=m
+CONFIG_RMI4_2D_SENSOR=y
+CONFIG_RMI4_F11=y
+CONFIG_RMI4_F12=y
+CONFIG_RMI4_F30=y
+CONFIG_RMI4_F34=y
+CONFIG_RMI4_F54=y
+CONFIG_RMI4_F55=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_CT82C710=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+CONFIG_SERIO_PS2MULT=m
+CONFIG_SERIO_ARC_PS2=m
+CONFIG_HYPERV_KEYBOARD=m
+CONFIG_SERIO_GPIO_PS2=m
+CONFIG_USERIO=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_TTY=y
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+CONFIG_CYZ_INTR=y
+CONFIG_MOXA_INTELLIO=m
+CONFIG_MOXA_SMARTIO=m
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+CONFIG_ISI=m
+CONFIG_N_HDLC=m
+CONFIG_N_GSM=m
+CONFIG_TRACE_ROUTER=m
+CONFIG_TRACE_SINK=m
+CONFIG_LDISC_AUTOLOAD=y
+CONFIG_DEVMEM=y
+# CONFIG_DEVKMEM is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_FINTEK=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DMA=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_EXAR=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_MEN_MCB=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_8250_DW=m
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_8250_LPSS=y
+CONFIG_SERIAL_8250_MID=y
+CONFIG_SERIAL_8250_MOXA=m
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MAX3100=m
+CONFIG_SERIAL_MAX310X=y
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_UARTLITE_NR_UARTS=1
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_SCCNXP=m
+CONFIG_SERIAL_SC16IS7XX_CORE=m
+CONFIG_SERIAL_SC16IS7XX=m
+CONFIG_SERIAL_SC16IS7XX_I2C=y
+CONFIG_SERIAL_SC16IS7XX_SPI=y
+CONFIG_SERIAL_ALTERA_JTAGUART=m
+CONFIG_SERIAL_ALTERA_UART=m
+CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
+CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+CONFIG_SERIAL_IFX6X60=m
+CONFIG_SERIAL_ARC=m
+CONFIG_SERIAL_ARC_NR_PORTS=1
+CONFIG_SERIAL_RP2=m
+CONFIG_SERIAL_RP2_NR_UARTS=32
+CONFIG_SERIAL_FSL_LPUART=m
+CONFIG_SERIAL_MEN_Z135=m
+CONFIG_SERIAL_DEV_BUS=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+CONFIG_IPMI_DMI_DECODE=y
+CONFIG_IPMI_PANIC_EVENT=y
+CONFIG_IPMI_PANIC_STRING=y
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_SSIF=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=m
+CONFIG_APPLICOM=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_SCR24X=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+CONFIG_HPET_MMAP_DEFAULT=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+CONFIG_HW_RANDOM_TPM=y
+CONFIG_TCG_TIS_CORE=m
+CONFIG_TCG_TIS=m
+CONFIG_TCG_TIS_SPI=m
+CONFIG_TCG_TIS_I2C_ATMEL=m
+CONFIG_TCG_TIS_I2C_INFINEON=m
+CONFIG_TCG_TIS_I2C_NUVOTON=m
+CONFIG_TCG_NSC=m
+CONFIG_TCG_ATMEL=m
+CONFIG_TCG_INFINEON=m
+CONFIG_TCG_CRB=m
+CONFIG_TCG_VTPM_PROXY=m
+CONFIG_TCG_TIS_ST33ZP24=m
+CONFIG_TCG_TIS_ST33ZP24_I2C=m
+CONFIG_TCG_TIS_ST33ZP24_SPI=m
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_XILLYBUS=m
+CONFIG_XILLYBUS_PCIE=m
+# CONFIG_RANDOM_TRUST_CPU is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_LTC4306=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_MUX_REG=m
+CONFIG_I2C_MUX_MLXCPLD=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_ISMT=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_CBUS_GPIO=m
+CONFIG_I2C_DESIGNWARE_CORE=m
+CONFIG_I2C_DESIGNWARE_PLATFORM=m
+# CONFIG_I2C_DESIGNWARE_SLAVE is not set
+CONFIG_I2C_DESIGNWARE_PCI=m
+# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
+CONFIG_I2C_EMEV2=m
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
+CONFIG_I2C_KEMPLD=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_XILINX=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_DIOLAN_U2C=m
+CONFIG_I2C_DLN2=m
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_ROBOTFUZZ_OSIF=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_TINY_USB=m
+CONFIG_I2C_VIPERBOARD=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_MLXCPLD=m
+CONFIG_I2C_CROS_EC_TUNNEL=m
+# CONFIG_I2C_STUB is not set
+CONFIG_I2C_SLAVE=y
+CONFIG_I2C_SLAVE_EEPROM=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ALTERA=m
+CONFIG_SPI_AXI_SPI_ENGINE=m
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_BUTTERFLY=m
+CONFIG_SPI_CADENCE=m
+CONFIG_SPI_DESIGNWARE=m
+CONFIG_SPI_DW_PCI=m
+CONFIG_SPI_DW_MID_DMA=y
+CONFIG_SPI_DW_MMIO=m
+CONFIG_SPI_DLN2=m
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_LM70_LLP=m
+CONFIG_SPI_OC_TINY=m
+CONFIG_SPI_PXA2XX=m
+CONFIG_SPI_PXA2XX_PCI=m
+CONFIG_SPI_ROCKCHIP=m
+CONFIG_SPI_SC18IS602=m
+CONFIG_SPI_XCOMM=m
+CONFIG_SPI_XILINX=m
+CONFIG_SPI_ZYNQMP_GQSPI=m
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=m
+CONFIG_SPI_LOOPBACK_TEST=m
+CONFIG_SPI_TLE62X0=m
+CONFIG_SPI_SLAVE=y
+CONFIG_SPI_SLAVE_TIME=m
+CONFIG_SPI_SLAVE_SYSTEM_CONTROL=m
+CONFIG_SPMI=m
+CONFIG_HSI=m
+CONFIG_HSI_BOARDINFO=y
+
+#
+# HSI controllers
+#
+
+#
+# HSI clients
+#
+CONFIG_HSI_CHAR=m
+CONFIG_PPS=y
+# CONFIG_PPS_DEBUG is not set
+# CONFIG_NTP_PPS is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_LDISC=m
+CONFIG_PPS_CLIENT_PARPORT=m
+CONFIG_PPS_CLIENT_GPIO=m
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_DP83640_PHY=m
+CONFIG_PTP_1588_CLOCK_KVM=m
+CONFIG_PINCTRL=y
+CONFIG_PINMUX=y
+CONFIG_PINCONF=y
+CONFIG_GENERIC_PINCONF=y
+# CONFIG_DEBUG_PINCTRL is not set
+CONFIG_PINCTRL_AMD=m
+CONFIG_PINCTRL_MCP23S08=m
+CONFIG_PINCTRL_BAYTRAIL=y
+CONFIG_PINCTRL_CHERRYVIEW=m
+CONFIG_PINCTRL_INTEL=m
+CONFIG_PINCTRL_BROXTON=m
+CONFIG_PINCTRL_CANNONLAKE=m
+CONFIG_PINCTRL_CEDARFORK=m
+CONFIG_PINCTRL_DENVERTON=m
+CONFIG_PINCTRL_GEMINILAKE=m
+# CONFIG_PINCTRL_ICELAKE is not set
+CONFIG_PINCTRL_LEWISBURG=m
+CONFIG_PINCTRL_SUNRISEPOINT=m
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_FASTPATH_LIMIT=512
+CONFIG_GPIO_ACPI=y
+CONFIG_GPIOLIB_IRQCHIP=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC=m
+CONFIG_GPIO_MAX730X=m
+
+#
+# Memory mapped GPIO drivers
+#
+CONFIG_GPIO_AMDPT=m
+CONFIG_GPIO_DWAPB=m
+CONFIG_GPIO_EXAR=m
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_ICH=m
+CONFIG_GPIO_LYNXPOINT=y
+CONFIG_GPIO_MB86S7X=m
+CONFIG_GPIO_MENZ127=m
+CONFIG_GPIO_MOCKUP=m
+CONFIG_GPIO_VX855=m
+
+#
+# Port-mapped I/O GPIO drivers
+#
+CONFIG_GPIO_F7188X=m
+CONFIG_GPIO_IT87=m
+CONFIG_GPIO_SCH=m
+CONFIG_GPIO_SCH311X=m
+CONFIG_GPIO_WINBOND=m
+CONFIG_GPIO_WS16C48=m
+
+#
+# I2C GPIO expanders
+#
+CONFIG_GPIO_ADP5588=m
+CONFIG_GPIO_MAX7300=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_TPIC2810=m
+
+#
+# MFD GPIO expanders
+#
+CONFIG_GPIO_ARIZONA=m
+CONFIG_GPIO_BD9571MWV=m
+CONFIG_GPIO_DA9052=m
+CONFIG_GPIO_DLN2=m
+CONFIG_GPIO_JANZ_TTL=m
+CONFIG_GPIO_KEMPLD=m
+CONFIG_GPIO_LP3943=m
+CONFIG_GPIO_LP873X=m
+CONFIG_GPIO_TPS65086=m
+CONFIG_GPIO_TPS65912=m
+CONFIG_GPIO_UCB1400=m
+CONFIG_GPIO_WHISKEY_COVE=m
+CONFIG_GPIO_WM831X=m
+CONFIG_GPIO_WM8994=m
+
+#
+# PCI GPIO expanders
+#
+CONFIG_GPIO_AMD8111=m
+CONFIG_GPIO_ML_IOH=m
+CONFIG_GPIO_PCI_IDIO_16=m
+CONFIG_GPIO_PCIE_IDIO_24=m
+CONFIG_GPIO_RDC321X=m
+
+#
+# SPI GPIO expanders
+#
+CONFIG_GPIO_MAX3191X=m
+CONFIG_GPIO_MAX7301=m
+CONFIG_GPIO_MC33880=m
+CONFIG_GPIO_PISOSR=m
+CONFIG_GPIO_XRA1403=m
+
+#
+# USB GPIO expanders
+#
+CONFIG_GPIO_VIPERBOARD=m
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+# CONFIG_W1_SLAVE_DS2405 is not set
+CONFIG_W1_SLAVE_DS2408=m
+# CONFIG_W1_SLAVE_DS2408_READBACK is not set
+CONFIG_W1_SLAVE_DS2413=m
+CONFIG_W1_SLAVE_DS2406=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2805=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2438=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_DS2781=m
+CONFIG_W1_SLAVE_DS28E04=m
+CONFIG_W1_SLAVE_DS28E17=m
+CONFIG_POWER_AVS=y
+CONFIG_POWER_RESET=y
+# CONFIG_POWER_RESET_RESTART is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=m
+CONFIG_GENERIC_ADC_BATTERY=m
+CONFIG_WM831X_BACKUP=m
+CONFIG_WM831X_POWER=m
+# CONFIG_TEST_POWER is not set
+# CONFIG_CHARGER_ADP5061 is not set
+CONFIG_BATTERY_DS2760=m
+CONFIG_BATTERY_DS2780=m
+CONFIG_BATTERY_DS2781=m
+CONFIG_BATTERY_DS2782=m
+CONFIG_BATTERY_SBS=m
+CONFIG_CHARGER_SBS=m
+CONFIG_MANAGER_SBS=m
+CONFIG_BATTERY_BQ27XXX=m
+CONFIG_BATTERY_BQ27XXX_I2C=m
+CONFIG_BATTERY_BQ27XXX_HDQ=m
+# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
+CONFIG_BATTERY_DA9052=m
+CONFIG_CHARGER_DA9150=m
+CONFIG_BATTERY_DA9150=m
+CONFIG_CHARGER_AXP20X=m
+CONFIG_BATTERY_AXP20X=m
+CONFIG_AXP20X_POWER=m
+CONFIG_AXP288_CHARGER=m
+CONFIG_AXP288_FUEL_GAUGE=m
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_BATTERY_MAX1721X=m
+CONFIG_CHARGER_PCF50633=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_MAX8903=m
+CONFIG_CHARGER_LP8727=m
+CONFIG_CHARGER_GPIO=m
+CONFIG_CHARGER_MANAGER=y
+CONFIG_CHARGER_LTC3651=m
+CONFIG_CHARGER_MAX14577=m
+CONFIG_CHARGER_MAX77693=m
+CONFIG_CHARGER_BQ2415X=m
+CONFIG_CHARGER_BQ24190=m
+CONFIG_CHARGER_BQ24257=m
+CONFIG_CHARGER_BQ24735=m
+CONFIG_CHARGER_BQ25890=m
+CONFIG_CHARGER_SMB347=m
+CONFIG_BATTERY_GAUGE_LTC2941=m
+CONFIG_BATTERY_RT5033=m
+CONFIG_CHARGER_RT9455=m
+# CONFIG_CHARGER_CROS_USBPD is not set
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7314=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7X10=m
+CONFIG_SENSORS_ADT7310=m
+CONFIG_SENSORS_ADT7410=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_APPLESMC=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ASPEED=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_DELL_SMM=m
+CONFIG_SENSORS_DA9052_ADC=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_MC13783_ADC=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_FTSTEUTATES=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_G762=m
+CONFIG_SENSORS_HIH6130=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IIO_HWMON=m
+CONFIG_SENSORS_I5500=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_POWR1220=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LTC2945=m
+CONFIG_SENSORS_LTC2990=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4222=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4260=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_MAX1111=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX197=m
+CONFIG_SENSORS_MAX31722=m
+CONFIG_SENSORS_MAX6621=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_MAX6697=m
+CONFIG_SENSORS_MAX31790=m
+CONFIG_SENSORS_MCP3021=m
+# CONFIG_SENSORS_MLXREG_FAN is not set
+CONFIG_SENSORS_TC654=m
+CONFIG_SENSORS_MENF21BMC_HWMON=m
+CONFIG_SENSORS_ADCXX=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM70=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LM95234=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_NCT6683=m
+CONFIG_SENSORS_NCT6775=m
+CONFIG_SENSORS_NCT7802=m
+CONFIG_SENSORS_NCT7904=m
+# CONFIG_SENSORS_NPCM7XX is not set
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_IBM_CFFPS=m
+CONFIG_SENSORS_IR35221=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_LTC2978_REGULATOR=y
+CONFIG_SENSORS_LTC3815=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX20751=m
+CONFIG_SENSORS_MAX31785=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_TPS40422=m
+CONFIG_SENSORS_TPS53679=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT15=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SHT3x=m
+CONFIG_SENSORS_SHTC1=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_STTS751=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_ADC128D818=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_ADS7871=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_INA209=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_INA3221=m
+CONFIG_SENSORS_TC74=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP103=m
+CONFIG_SENSORS_TMP108=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83773G=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83795_FANCTRL is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_WM831X=m
+CONFIG_SENSORS_XGENE=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=y
+# CONFIG_THERMAL_STATISTICS is not set
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_WRITABLE_TRIPS=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
+CONFIG_THERMAL_GOV_FAIR_SHARE=y
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_GOV_BANG_BANG=y
+CONFIG_THERMAL_GOV_USER_SPACE=y
+# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
+CONFIG_CLOCK_THERMAL=y
+CONFIG_DEVFREQ_THERMAL=y
+# CONFIG_THERMAL_EMULATION is not set
+CONFIG_INTEL_POWERCLAMP=m
+CONFIG_X86_PKG_TEMP_THERMAL=m
+CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
+CONFIG_INTEL_SOC_DTS_THERMAL=m
+
+#
+# ACPI INT340X thermal drivers
+#
+CONFIG_INT340X_THERMAL=m
+CONFIG_ACPI_THERMAL_REL=m
+CONFIG_INT3406_THERMAL=m
+CONFIG_INTEL_BXT_PMIC_THERMAL=m
+CONFIG_INTEL_PCH_THERMAL=m
+CONFIG_GENERIC_ADC_THERMAL=m
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
+# CONFIG_WATCHDOG_SYSFS is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_SOFT_WATCHDOG_PRETIMEOUT is not set
+CONFIG_DA9052_WATCHDOG=m
+CONFIG_DA9063_WATCHDOG=m
+CONFIG_DA9062_WATCHDOG=m
+CONFIG_MENF21BMC_WATCHDOG=m
+# CONFIG_MENZ069_WATCHDOG is not set
+CONFIG_WDAT_WDT=m
+CONFIG_WM831X_WATCHDOG=m
+CONFIG_XILINX_WATCHDOG=m
+CONFIG_ZIIRAVE_WATCHDOG=m
+CONFIG_RAVE_SP_WATCHDOG=m
+CONFIG_CADENCE_WATCHDOG=m
+CONFIG_DW_WATCHDOG=m
+CONFIG_MAX63XX_WATCHDOG=m
+CONFIG_RETU_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_EBC_C384_WDT=m
+CONFIG_F71808E_WDT=m
+# CONFIG_SP5100_TCO is not set
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_IE6XX_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_KEMPLD_WDT=m
+CONFIG_HPWDT_NMI_DECODING=y
+CONFIG_SC1200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+CONFIG_INTEL_MEI_WDT=m
+CONFIG_NI903X_WDT=m
+CONFIG_NIC7018_WDT=m
+CONFIG_MEN_A21_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+
+#
+# Watchdog Pretimeout Governors
+#
+CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
+# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set
+CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y
+CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=m
+CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_SSB_DRIVER_GPIO=y
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_BCMA=m
+CONFIG_BCMA_BLOCKIO=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_PCI=y
+CONFIG_BCMA_HOST_SOC=y
+CONFIG_BCMA_DRIVER_PCI=y
+CONFIG_BCMA_SFLASH=y
+CONFIG_BCMA_DRIVER_GMAC_CMN=y
+CONFIG_BCMA_DRIVER_GPIO=y
+# CONFIG_BCMA_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+CONFIG_MFD_BCM590XX=m
+CONFIG_MFD_BD9571MWV=m
+CONFIG_MFD_AXP20X=m
+CONFIG_MFD_AXP20X_I2C=m
+CONFIG_MFD_CROS_EC=m
+# CONFIG_MFD_CROS_EC_CHARDEV is not set
+# CONFIG_MFD_MADERA is not set
+CONFIG_PMIC_DA9052=y
+CONFIG_MFD_DA9052_SPI=y
+CONFIG_MFD_DA9062=m
+CONFIG_MFD_DA9063=m
+CONFIG_MFD_DA9150=m
+CONFIG_MFD_DLN2=m
+CONFIG_MFD_MC13XXX=m
+CONFIG_MFD_MC13XXX_SPI=m
+CONFIG_MFD_MC13XXX_I2C=m
+CONFIG_HTC_PASIC3=m
+CONFIG_MFD_INTEL_QUARK_I2C_GPIO=m
+CONFIG_LPC_ICH=m
+CONFIG_LPC_SCH=m
+CONFIG_INTEL_SOC_PMIC_BXTWC=m
+CONFIG_INTEL_SOC_PMIC_CHTDC_TI=m
+CONFIG_MFD_INTEL_LPSS=m
+CONFIG_MFD_INTEL_LPSS_ACPI=m
+CONFIG_MFD_INTEL_LPSS_PCI=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_KEMPLD=m
+CONFIG_MFD_88PM800=m
+CONFIG_MFD_88PM805=m
+CONFIG_MFD_MAX14577=m
+CONFIG_MFD_MAX77693=m
+CONFIG_MFD_MAX8907=m
+CONFIG_MFD_MT6397=m
+CONFIG_MFD_MENF21BMC=m
+CONFIG_EZX_PCAP=y
+CONFIG_MFD_VIPERBOARD=m
+CONFIG_MFD_RETU=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_UCB1400_CORE=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_RT5033=m
+CONFIG_MFD_SI476X_CORE=m
+CONFIG_MFD_SM501=m
+CONFIG_MFD_SM501_GPIO=y
+CONFIG_MFD_SKY81452=m
+CONFIG_ABX500_CORE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MFD_TI_AM335X_TSCADC=m
+CONFIG_MFD_LP3943=m
+CONFIG_MFD_TI_LMU=m
+CONFIG_TPS6105X=m
+CONFIG_TPS65010=m
+CONFIG_TPS6507X=m
+CONFIG_MFD_TPS65086=m
+CONFIG_MFD_TI_LP873X=m
+CONFIG_MFD_TPS65912=y
+CONFIG_MFD_TPS65912_I2C=m
+CONFIG_MFD_TPS65912_SPI=y
+CONFIG_MFD_WL1273_CORE=m
+CONFIG_MFD_LM3533=m
+CONFIG_MFD_VX855=m
+CONFIG_MFD_ARIZONA=y
+CONFIG_MFD_ARIZONA_I2C=m
+CONFIG_MFD_ARIZONA_SPI=m
+CONFIG_MFD_CS47L24=y
+CONFIG_MFD_WM5102=y
+CONFIG_MFD_WM5110=y
+CONFIG_MFD_WM8997=y
+CONFIG_MFD_WM8998=y
+CONFIG_MFD_WM831X=y
+CONFIG_MFD_WM831X_SPI=y
+CONFIG_MFD_WM8994=m
+CONFIG_RAVE_SP_CORE=m
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_88PG86X=m
+CONFIG_REGULATOR_88PM800=m
+CONFIG_REGULATOR_ACT8865=m
+CONFIG_REGULATOR_AD5398=m
+CONFIG_REGULATOR_ANATOP=m
+CONFIG_REGULATOR_ARIZONA_LDO1=m
+CONFIG_REGULATOR_ARIZONA_MICSUPP=m
+CONFIG_REGULATOR_AXP20X=m
+CONFIG_REGULATOR_BCM590XX=m
+CONFIG_REGULATOR_BD9571MWV=m
+CONFIG_REGULATOR_DA9052=m
+CONFIG_REGULATOR_DA9062=m
+CONFIG_REGULATOR_DA9063=m
+CONFIG_REGULATOR_DA9210=m
+CONFIG_REGULATOR_DA9211=m
+CONFIG_REGULATOR_FAN53555=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_ISL9305=m
+CONFIG_REGULATOR_ISL6271A=m
+CONFIG_REGULATOR_LM363X=m
+CONFIG_REGULATOR_LP3971=m
+CONFIG_REGULATOR_LP3972=m
+CONFIG_REGULATOR_LP872X=m
+CONFIG_REGULATOR_LP8755=m
+CONFIG_REGULATOR_LTC3589=m
+CONFIG_REGULATOR_LTC3676=m
+CONFIG_REGULATOR_MAX14577=m
+CONFIG_REGULATOR_MAX1586=m
+CONFIG_REGULATOR_MAX8649=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8907=m
+CONFIG_REGULATOR_MAX8952=m
+CONFIG_REGULATOR_MAX77693=m
+CONFIG_REGULATOR_MC13XXX_CORE=m
+CONFIG_REGULATOR_MC13783=m
+CONFIG_REGULATOR_MC13892=m
+CONFIG_REGULATOR_MT6311=m
+CONFIG_REGULATOR_MT6323=m
+CONFIG_REGULATOR_MT6397=m
+CONFIG_REGULATOR_PCAP=m
+CONFIG_REGULATOR_PCF50633=m
+CONFIG_REGULATOR_PFUZE100=m
+CONFIG_REGULATOR_PV88060=m
+CONFIG_REGULATOR_PV88080=m
+CONFIG_REGULATOR_PV88090=m
+CONFIG_REGULATOR_PWM=m
+CONFIG_REGULATOR_QCOM_SPMI=m
+CONFIG_REGULATOR_RT5033=m
+CONFIG_REGULATOR_SKY81452=m
+CONFIG_REGULATOR_TPS51632=m
+CONFIG_REGULATOR_TPS6105X=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_REGULATOR_TPS65086=m
+CONFIG_REGULATOR_TPS65132=m
+CONFIG_REGULATOR_TPS6524X=m
+CONFIG_REGULATOR_TPS65912=m
+CONFIG_REGULATOR_WM831X=m
+CONFIG_REGULATOR_WM8994=m
+CONFIG_CEC_CORE=m
+CONFIG_CEC_NOTIFIER=y
+CONFIG_CEC_PIN=y
+CONFIG_RC_CORE=m
+CONFIG_RC_MAP=m
+CONFIG_LIRC=y
+CONFIG_RC_DECODERS=y
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_SHARP_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_XMP_DECODER=m
+CONFIG_IR_IMON_DECODER=m
+CONFIG_RC_DEVICES=y
+CONFIG_RC_ATI_REMOTE=m
+CONFIG_IR_ENE=m
+CONFIG_IR_IMON=m
+CONFIG_IR_IMON_RAW=m
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_ITE_CIR=m
+CONFIG_IR_FINTEK=m
+CONFIG_IR_NUVOTON=m
+CONFIG_IR_REDRAT3=m
+CONFIG_IR_STREAMZAP=m
+CONFIG_IR_WINBOND_CIR=m
+CONFIG_IR_IGORPLUGUSB=m
+CONFIG_IR_IGUANA=m
+CONFIG_IR_TTUSBIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_SERIAL=m
+CONFIG_IR_SERIAL_TRANSMITTER=y
+CONFIG_IR_SIR=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+CONFIG_MEDIA_RADIO_SUPPORT=y
+CONFIG_MEDIA_SDR_SUPPORT=y
+CONFIG_MEDIA_CEC_SUPPORT=y
+CONFIG_MEDIA_CEC_RC=y
+# CONFIG_CEC_PIN_ERROR_INJ is not set
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_MEDIA_CONTROLLER_DVB=y
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_VIDEO_V4L2=m
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_PCI_SKELETON=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_V4L2_FLASH_LED_CLASS=m
+CONFIG_V4L2_FWNODE=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_DVB_CORE=m
+# CONFIG_DVB_MMAP is not set
+CONFIG_DVB_NET=y
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_MAX_ADAPTERS=8
+CONFIG_DVB_DYNAMIC_MINORS=y
+# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
+# CONFIG_DVB_ULE_DEBUG is not set
+
+#
+# Media drivers
+#
+CONFIG_MEDIA_USB_SUPPORT=y
+
+#
+# Webcam devices
+#
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_DTCS033=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STK1135=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TOUPTEK=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_VIDEO_USBTV=m
+
+#
+# Analog TV USB devices
+#
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_STK1160_COMMON=m
+CONFIG_VIDEO_STK1160=m
+CONFIG_VIDEO_GO7007=m
+CONFIG_VIDEO_GO7007_USB=m
+CONFIG_VIDEO_GO7007_LOADER=m
+CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
+
+#
+# Analog/digital TV USB devices
+#
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_AU0828_V4L2=y
+CONFIG_VIDEO_AU0828_RC=y
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_RC=y
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_TM6000_DVB=m
+
+#
+# Digital TV USB devices
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_DIB3000MC=m
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_V2=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_DVBSKY=m
+CONFIG_DVB_USB_ZD1301=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_USB_DRV=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
+CONFIG_DVB_AS102=m
+
+#
+# Webcam, TV (analog/digital) USB devices
+#
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_V4L2=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=m
+
+#
+# Software defined radio USB devices
+#
+CONFIG_USB_AIRSPY=m
+CONFIG_USB_HACKRF=m
+CONFIG_USB_MSI2500=m
+
+#
+# USB HDMI CEC adapters
+#
+CONFIG_USB_PULSE8_CEC=m
+CONFIG_USB_RAINSHADOW_CEC=m
+CONFIG_MEDIA_PCI_SUPPORT=y
+
+#
+# Media capture support
+#
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_SOLO6X10=m
+CONFIG_VIDEO_TW5864=m
+CONFIG_VIDEO_TW68=m
+CONFIG_VIDEO_TW686X=m
+
+#
+# Media capture/analog TV support
+#
+CONFIG_VIDEO_IVTV=m
+# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set
+CONFIG_VIDEO_IVTV_ALSA=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_DT3155=m
+
+#
+# Media capture/analog/hybrid TV support
+#
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CX18_ALSA=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_MEDIA_ALTERA_CI=m
+CONFIG_VIDEO_CX25821=m
+CONFIG_VIDEO_CX25821_ALSA=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_ENABLE_VP3054=y
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_BT848=m
+CONFIG_DVB_BT8XX=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_RC=y
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_SAA7134_GO7007=m
+CONFIG_VIDEO_SAA7164=m
+# CONFIG_VIDEO_COBALT is not set
+
+#
+# Media digital TV PCI Adapters
+#
+CONFIG_DVB_AV7110_IR=y
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
+CONFIG_DVB_PLUTO2=m
+CONFIG_DVB_DM1105=m
+CONFIG_DVB_PT1=m
+CONFIG_DVB_PT3=m
+CONFIG_MANTIS_CORE=m
+CONFIG_DVB_MANTIS=m
+CONFIG_DVB_HOPPER=m
+CONFIG_DVB_NGENE=m
+CONFIG_DVB_DDBRIDGE=m
+# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
+CONFIG_DVB_SMIPCIE=m
+CONFIG_DVB_NETUP_UNIDVB=m
+CONFIG_VIDEO_IPU3_CIO2=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_CADENCE=y
+CONFIG_VIDEO_CADENCE_CSI2RX=m
+CONFIG_VIDEO_CADENCE_CSI2TX=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
+CONFIG_VIDEO_SH_VEU=m
+# CONFIG_V4L_TEST_DRIVERS is not set
+CONFIG_DVB_PLATFORM_DRIVERS=y
+CONFIG_CEC_PLATFORM_DRIVERS=y
+# CONFIG_VIDEO_CROS_EC_CEC is not set
+CONFIG_CEC_GPIO=m
+CONFIG_SDR_PLATFORM_DRIVERS=y
+
+#
+# Supported MMC/SDIO adapters
+#
+CONFIG_SMS_SDIO_DRV=m
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_TEA575X=m
+CONFIG_RADIO_SI470X=m
+CONFIG_USB_SI470X=m
+CONFIG_I2C_SI470X=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_SI4713=m
+CONFIG_PLATFORM_SI4713=m
+CONFIG_I2C_SI4713=m
+CONFIG_RADIO_SI476X=m
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_SHARK=m
+CONFIG_RADIO_SHARK2=m
+CONFIG_USB_KEENE=m
+CONFIG_USB_RAREMONO=m
+CONFIG_USB_MA901=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_WL1273=m
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+CONFIG_RADIO_WL128X=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+CONFIG_MEDIA_COMMON_OPTIONS=y
+
+#
+# common driver options
+#
+CONFIG_VIDEO_CX2341X=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_CYPRESS_FIRMWARE=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_V4L2=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_DMA_CONTIG=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_VIDEOBUF2_DMA_SG=m
+CONFIG_VIDEOBUF2_DVB=m
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_SMS_SIANO_MDTV=m
+CONFIG_SMS_SIANO_RC=y
+# CONFIG_SMS_SIANO_DEBUGFS is not set
+
+#
+# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
+#
+CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
+CONFIG_MEDIA_ATTACH=y
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS3308=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_UDA1342=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+CONFIG_VIDEO_SONY_BTF_MPX=m
+
+#
+# RDS decoders
+#
+CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_TW2804=m
+CONFIG_VIDEO_TW9903=m
+CONFIG_VIDEO_TW9906=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_CX25840=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_OV2640=m
+CONFIG_VIDEO_OV7640=m
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_MT9M111=m
+CONFIG_VIDEO_MT9V011=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# Audio/Video compression chips
+#
+CONFIG_VIDEO_SAA6752HS=m
+
+#
+# SDR tuner chips
+#
+
+#
+# Miscellaneous helper chips
+#
+CONFIG_VIDEO_M52790=m
+
+#
+# Sensors used on soc_camera driver
+#
+
+#
+# soc_camera sensor drivers
+#
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+
+#
+# Media SPI Adapters
+#
+CONFIG_CXD2880_SPI_DRV=m
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA18250=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MSI001=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2063=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_FC0012=m
+CONFIG_MEDIA_TUNER_FC0013=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_E4000=m
+CONFIG_MEDIA_TUNER_FC2580=m
+CONFIG_MEDIA_TUNER_M88RS6000T=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_MEDIA_TUNER_SI2157=m
+CONFIG_MEDIA_TUNER_IT913X=m
+CONFIG_MEDIA_TUNER_R820T=m
+CONFIG_MEDIA_TUNER_MXL301RF=m
+CONFIG_MEDIA_TUNER_QM1D1C0042=m
+CONFIG_MEDIA_TUNER_QM1D1B0004=m
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV0910=m
+CONFIG_DVB_STV6110x=m
+CONFIG_DVB_STV6111=m
+CONFIG_DVB_MXL5XX=m
+CONFIG_DVB_M88DS3103=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+CONFIG_DVB_SI2165=m
+CONFIG_DVB_MN88472=m
+CONFIG_DVB_MN88473=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_CX24117=m
+CONFIG_DVB_CX24120=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_TS2020=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_CXD2841ER=m
+CONFIG_DVB_RTL2830=m
+CONFIG_DVB_RTL2832=m
+CONFIG_DVB_RTL2832_SDR=m
+CONFIG_DVB_SI2168=m
+CONFIG_DVB_AS102_FE=m
+CONFIG_DVB_ZD1301_DEMOD=m
+CONFIG_DVB_GP8PSK_FE=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LGDT3306A=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_TC90522=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_DRX39XYJ=m
+CONFIG_DVB_LNBH25=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+CONFIG_DVB_HORUS3A=m
+CONFIG_DVB_ASCOT2E=m
+CONFIG_DVB_HELENE=m
+
+#
+# Common Interface (EN50221) controller drivers
+#
+CONFIG_DVB_CXD2099=m
+CONFIG_DVB_SP2=m
+
+#
+# Tools to develop new frontends
+#
+CONFIG_DVB_DUMMY_FE=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_VIA=m
+CONFIG_INTEL_GTT=m
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_MIPI_DSI=y
+CONFIG_DRM_DP_AUX_CHARDEV=y
+CONFIG_DRM_DEBUG_SELFTEST=m
+CONFIG_DRM_KMS_HELPER=m
+CONFIG_DRM_KMS_FB_HELPER=y
+CONFIG_DRM_FBDEV_EMULATION=y
+CONFIG_DRM_FBDEV_OVERALLOC=100
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+# CONFIG_DRM_DP_CEC is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_GEM_CMA_HELPER=y
+CONFIG_DRM_KMS_CMA_HELPER=y
+CONFIG_DRM_VM=y
+CONFIG_DRM_SCHED=m
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+CONFIG_DRM_I2C_NXP_TDA998X=m
+CONFIG_DRM_I2C_NXP_TDA9950=m
+CONFIG_DRM_RADEON=m
+# CONFIG_DRM_RADEON_USERPTR is not set
+CONFIG_DRM_AMDGPU=m
+CONFIG_DRM_AMDGPU_SI=y
+CONFIG_DRM_AMDGPU_CIK=y
+CONFIG_DRM_AMDGPU_USERPTR=y
+# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
+
+#
+# ACP (Audio CoProcessor) Configuration
+#
+CONFIG_DRM_AMD_ACP=y
+
+#
+# Display Engine Configuration
+#
+CONFIG_DRM_AMD_DC=y
+CONFIG_DRM_AMD_DC_DCN1_0=y
+# CONFIG_DEBUG_KERNEL_DC is not set
+
+#
+# AMD Library routines
+#
+CONFIG_CHASH=m
+# CONFIG_CHASH_STATS is not set
+# CONFIG_CHASH_SELFTEST is not set
+CONFIG_DRM_NOUVEAU=m
+CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y
+CONFIG_NOUVEAU_DEBUG=5
+CONFIG_NOUVEAU_DEBUG_DEFAULT=3
+# CONFIG_NOUVEAU_DEBUG_MMU is not set
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_I915=m
+# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
+CONFIG_DRM_I915_CAPTURE_ERROR=y
+CONFIG_DRM_I915_COMPRESS_ERROR=y
+CONFIG_DRM_I915_USERPTR=y
+CONFIG_DRM_I915_GVT=y
+CONFIG_DRM_I915_GVT_KVMGT=m
+CONFIG_DRM_VGEM=m
+# CONFIG_DRM_VKMS is not set
+CONFIG_DRM_VMWGFX=m
+CONFIG_DRM_VMWGFX_FBCON=y
+CONFIG_DRM_GMA500=m
+CONFIG_DRM_GMA600=y
+CONFIG_DRM_GMA3600=y
+CONFIG_DRM_UDL=m
+CONFIG_DRM_AST=m
+CONFIG_DRM_MGAG200=m
+CONFIG_DRM_CIRRUS_QEMU=m
+CONFIG_DRM_QXL=m
+CONFIG_DRM_BOCHS=m
+CONFIG_DRM_VIRTIO_GPU=m
+CONFIG_DRM_PANEL=y
+
+#
+# Display Panels
+#
+CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
+CONFIG_DRM_BRIDGE=y
+CONFIG_DRM_PANEL_BRIDGE=y
+
+#
+# Display Interface Bridges
+#
+CONFIG_DRM_ANALOGIX_ANX78XX=m
+CONFIG_HSA_AMD=m
+CONFIG_DRM_HISI_HIBMC=m
+CONFIG_DRM_TINYDRM=m
+CONFIG_TINYDRM_MIPI_DBI=m
+CONFIG_TINYDRM_ILI9225=m
+# CONFIG_TINYDRM_ILI9341 is not set
+CONFIG_TINYDRM_MI0283QT=m
+CONFIG_TINYDRM_REPAPER=m
+CONFIG_TINYDRM_ST7586=m
+CONFIG_TINYDRM_ST7735R=m
+# CONFIG_DRM_LEGACY is not set
+CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
+CONFIG_DRM_LIB_RANDOM=y
+
+#
+# Frame buffer Devices
+#
+CONFIG_FB_CMDLINE=y
+CONFIG_FB_NOTIFY=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_OPENCORES is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_I740 is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_SM501 is not set
+# CONFIG_FB_SMSCUFX is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_HYPERV is not set
+CONFIG_FB_SIMPLE=y
+# CONFIG_FB_SM712 is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_L4F00242T03=m
+CONFIG_LCD_LMS283GF05=m
+CONFIG_LCD_LTV350QV=m
+CONFIG_LCD_ILI922X=m
+CONFIG_LCD_ILI9320=m
+CONFIG_LCD_TDO24M=m
+CONFIG_LCD_VGG2432A4=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_LCD_S6E63M0=m
+CONFIG_LCD_LD9040=m
+CONFIG_LCD_AMS369FG06=m
+CONFIG_LCD_LMS501KF03=m
+CONFIG_LCD_HX8357=m
+CONFIG_LCD_OTM3225A=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LM3533=m
+CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_DA9052=m
+CONFIG_BACKLIGHT_APPLE=m
+CONFIG_BACKLIGHT_PM8941_WLED=m
+CONFIG_BACKLIGHT_SAHARA=m
+CONFIG_BACKLIGHT_WM831X=m
+CONFIG_BACKLIGHT_ADP8860=m
+CONFIG_BACKLIGHT_ADP8870=m
+CONFIG_BACKLIGHT_PCF50633=m
+CONFIG_BACKLIGHT_LM3630A=m
+CONFIG_BACKLIGHT_LM3639=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_BACKLIGHT_SKY81452=m
+CONFIG_BACKLIGHT_GPIO=m
+CONFIG_BACKLIGHT_LV5207LP=m
+CONFIG_BACKLIGHT_BD6107=m
+CONFIG_BACKLIGHT_ARCXCNN=m
+CONFIG_BACKLIGHT_RAVE_SP=m
+CONFIG_HDMI=y
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_DUMMY_CONSOLE_COLUMNS=80
+CONFIG_DUMMY_CONSOLE_ROWS=25
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_PCM_ELD=y
+CONFIG_SND_PCM_IEC958=y
+CONFIG_SND_DMAENGINE_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_SEQ_DEVICE=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_COMPRESS_OFFLOAD=m
+CONFIG_SND_JACK=y
+CONFIG_SND_JACK_INPUT_DEV=y
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_PCM_TIMER=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_MAX_CARDS=32
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_PROC_FS=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_SEQUENCER_OSS=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_SEQ_MIDI_EVENT=m
+CONFIG_SND_SEQ_MIDI=m
+CONFIG_SND_SEQ_MIDI_EMUL=m
+CONFIG_SND_SEQ_VIRMIDI=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ASIHPI=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+CONFIG_SND_BT87X_OVERCLOCK=y
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_ES1968_INPUT=y
+CONFIG_SND_ES1968_RADIO=y
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_LOLA=m
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MAESTRO3_INPUT=y
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+
+#
+# HD-Audio
+#
+CONFIG_SND_HDA=m
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_HWDEP=y
+CONFIG_SND_HDA_RECONFIG=y
+CONFIG_SND_HDA_INPUT_BEEP=y
+CONFIG_SND_HDA_INPUT_BEEP_MODE=1
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=m
+CONFIG_SND_HDA_CODEC_ANALOG=m
+CONFIG_SND_HDA_CODEC_SIGMATEL=m
+CONFIG_SND_HDA_CODEC_VIA=m
+CONFIG_SND_HDA_CODEC_HDMI=m
+CONFIG_SND_HDA_CODEC_CIRRUS=m
+CONFIG_SND_HDA_CODEC_CONEXANT=m
+CONFIG_SND_HDA_CODEC_CA0110=m
+CONFIG_SND_HDA_CODEC_CA0132=m
+CONFIG_SND_HDA_CODEC_CA0132_DSP=y
+CONFIG_SND_HDA_CODEC_CMEDIA=m
+CONFIG_SND_HDA_CODEC_SI3054=m
+CONFIG_SND_HDA_GENERIC=m
+CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
+CONFIG_SND_HDA_CORE=m
+CONFIG_SND_HDA_DSP_LOADER=y
+CONFIG_SND_HDA_COMPONENT=y
+CONFIG_SND_HDA_I915=y
+CONFIG_SND_HDA_EXT_CORE=m
+CONFIG_SND_HDA_PREALLOC_SIZE=64
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_USB_HIFACE=m
+CONFIG_SND_BCD2000=m
+CONFIG_SND_USB_LINE6=m
+CONFIG_SND_USB_POD=m
+CONFIG_SND_USB_PODHD=m
+CONFIG_SND_USB_TONEPORT=m
+CONFIG_SND_USB_VARIAX=m
+CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_DICE=m
+CONFIG_SND_OXFW=m
+CONFIG_SND_ISIGHT=m
+CONFIG_SND_FIREWORKS=m
+CONFIG_SND_BEBOB=m
+CONFIG_SND_FIREWIRE_DIGI00X=m
+CONFIG_SND_FIREWIRE_TASCAM=m
+CONFIG_SND_FIREWIRE_MOTU=m
+CONFIG_SND_FIREFACE=m
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
+CONFIG_SND_SOC_COMPRESS=y
+CONFIG_SND_SOC_TOPOLOGY=y
+CONFIG_SND_SOC_ACPI=m
+CONFIG_SND_SOC_AMD_ACP=m
+CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=m
+CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m
+CONFIG_SND_ATMEL_SOC=m
+CONFIG_SND_DESIGNWARE_I2S=m
+CONFIG_SND_DESIGNWARE_PCM=y
+
+#
+# SoC Audio for Freescale CPUs
+#
+
+#
+# Common SoC Audio options for Freescale CPUs:
+#
+CONFIG_SND_SOC_FSL_ASRC=m
+CONFIG_SND_SOC_FSL_SAI=m
+CONFIG_SND_SOC_FSL_SSI=m
+CONFIG_SND_SOC_FSL_SPDIF=m
+CONFIG_SND_SOC_FSL_ESAI=m
+CONFIG_SND_SOC_IMX_AUDMUX=m
+CONFIG_SND_I2S_HI6210_I2S=m
+CONFIG_SND_SOC_IMG=y
+CONFIG_SND_SOC_IMG_I2S_IN=m
+CONFIG_SND_SOC_IMG_I2S_OUT=m
+CONFIG_SND_SOC_IMG_PARALLEL_OUT=m
+CONFIG_SND_SOC_IMG_SPDIF_IN=m
+CONFIG_SND_SOC_IMG_SPDIF_OUT=m
+CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=m
+CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
+CONFIG_SND_SST_IPC=m
+CONFIG_SND_SST_IPC_PCI=m
+CONFIG_SND_SST_IPC_ACPI=m
+CONFIG_SND_SOC_INTEL_SST_ACPI=m
+CONFIG_SND_SOC_INTEL_SST=m
+CONFIG_SND_SOC_INTEL_SST_FIRMWARE=m
+CONFIG_SND_SOC_INTEL_HASWELL=m
+CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m
+CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI=m
+CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m
+CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=m
+CONFIG_SND_SOC_INTEL_SKYLAKE=m
+CONFIG_SND_SOC_ACPI_INTEL_MATCH=m
+CONFIG_SND_SOC_INTEL_MACH=y
+CONFIG_SND_SOC_INTEL_HASWELL_MACH=m
+CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=m
+CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m
+CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
+CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m
+CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m
+CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m
+CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m
+CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m
+CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m
+CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m
+CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m
+CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m
+CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m
+CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m
+CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m
+CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m
+CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m
+CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=m
+CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH=m
+# CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH is not set
+
+#
+# STMicroelectronics STM32 SOC audio support
+#
+CONFIG_SND_SOC_XTFPGA_I2S=m
+CONFIG_ZX_TDM=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+
+#
+# CODEC drivers
+#
+# CONFIG_SND_SOC_AC97_CODEC is not set
+CONFIG_SND_SOC_ADAU_UTILS=m
+CONFIG_SND_SOC_ADAU1701=m
+CONFIG_SND_SOC_ADAU17X1=m
+CONFIG_SND_SOC_ADAU1761=m
+CONFIG_SND_SOC_ADAU1761_I2C=m
+CONFIG_SND_SOC_ADAU1761_SPI=m
+CONFIG_SND_SOC_ADAU7002=m
+CONFIG_SND_SOC_AK4104=m
+CONFIG_SND_SOC_AK4458=m
+CONFIG_SND_SOC_AK4554=m
+CONFIG_SND_SOC_AK4613=m
+CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_AK5386=m
+CONFIG_SND_SOC_AK5558=m
+CONFIG_SND_SOC_ALC5623=m
+CONFIG_SND_SOC_BD28623=m
+# CONFIG_SND_SOC_BT_SCO is not set
+CONFIG_SND_SOC_CS35L32=m
+CONFIG_SND_SOC_CS35L33=m
+CONFIG_SND_SOC_CS35L34=m
+CONFIG_SND_SOC_CS35L35=m
+CONFIG_SND_SOC_CS42L42=m
+CONFIG_SND_SOC_CS42L51=m
+CONFIG_SND_SOC_CS42L51_I2C=m
+CONFIG_SND_SOC_CS42L52=m
+CONFIG_SND_SOC_CS42L56=m
+CONFIG_SND_SOC_CS42L73=m
+CONFIG_SND_SOC_CS4265=m
+CONFIG_SND_SOC_CS4270=m
+CONFIG_SND_SOC_CS4271=m
+CONFIG_SND_SOC_CS4271_I2C=m
+CONFIG_SND_SOC_CS4271_SPI=m
+CONFIG_SND_SOC_CS42XX8=m
+CONFIG_SND_SOC_CS42XX8_I2C=m
+CONFIG_SND_SOC_CS43130=m
+CONFIG_SND_SOC_CS4349=m
+CONFIG_SND_SOC_CS53L30=m
+CONFIG_SND_SOC_DA7213=m
+CONFIG_SND_SOC_DA7219=m
+CONFIG_SND_SOC_DMIC=m
+CONFIG_SND_SOC_HDMI_CODEC=m
+CONFIG_SND_SOC_ES7134=m
+# CONFIG_SND_SOC_ES7241 is not set
+CONFIG_SND_SOC_ES8316=m
+CONFIG_SND_SOC_ES8328=m
+CONFIG_SND_SOC_ES8328_I2C=m
+CONFIG_SND_SOC_ES8328_SPI=m
+CONFIG_SND_SOC_GTM601=m
+CONFIG_SND_SOC_HDAC_HDMI=m
+CONFIG_SND_SOC_INNO_RK3036=m
+CONFIG_SND_SOC_MAX98090=m
+CONFIG_SND_SOC_MAX98357A=m
+CONFIG_SND_SOC_MAX98504=m
+CONFIG_SND_SOC_MAX9867=m
+CONFIG_SND_SOC_MAX98927=m
+CONFIG_SND_SOC_MAX98373=m
+CONFIG_SND_SOC_MAX9860=m
+CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
+CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
+CONFIG_SND_SOC_PCM1681=m
+CONFIG_SND_SOC_PCM1789=m
+CONFIG_SND_SOC_PCM1789_I2C=m
+CONFIG_SND_SOC_PCM179X=m
+CONFIG_SND_SOC_PCM179X_I2C=m
+CONFIG_SND_SOC_PCM179X_SPI=m
+CONFIG_SND_SOC_PCM186X=m
+CONFIG_SND_SOC_PCM186X_I2C=m
+CONFIG_SND_SOC_PCM186X_SPI=m
+CONFIG_SND_SOC_PCM3168A=m
+CONFIG_SND_SOC_PCM3168A_I2C=m
+CONFIG_SND_SOC_PCM3168A_SPI=m
+CONFIG_SND_SOC_PCM512x=m
+CONFIG_SND_SOC_PCM512x_I2C=m
+CONFIG_SND_SOC_PCM512x_SPI=m
+CONFIG_SND_SOC_RL6231=m
+CONFIG_SND_SOC_RL6347A=m
+CONFIG_SND_SOC_RT286=m
+CONFIG_SND_SOC_RT298=m
+CONFIG_SND_SOC_RT5514=m
+CONFIG_SND_SOC_RT5514_SPI=m
+CONFIG_SND_SOC_RT5616=m
+CONFIG_SND_SOC_RT5631=m
+CONFIG_SND_SOC_RT5640=m
+CONFIG_SND_SOC_RT5645=m
+CONFIG_SND_SOC_RT5651=m
+CONFIG_SND_SOC_RT5663=m
+CONFIG_SND_SOC_RT5670=m
+CONFIG_SND_SOC_RT5677=m
+CONFIG_SND_SOC_RT5677_SPI=m
+CONFIG_SND_SOC_SGTL5000=m
+CONFIG_SND_SOC_SI476X=m
+CONFIG_SND_SOC_SIGMADSP=m
+CONFIG_SND_SOC_SIGMADSP_I2C=m
+CONFIG_SND_SOC_SIGMADSP_REGMAP=m
+# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
+CONFIG_SND_SOC_SIRF_AUDIO_CODEC=m
+CONFIG_SND_SOC_SPDIF=m
+CONFIG_SND_SOC_SSM2305=m
+CONFIG_SND_SOC_SSM2602=m
+CONFIG_SND_SOC_SSM2602_SPI=m
+CONFIG_SND_SOC_SSM2602_I2C=m
+CONFIG_SND_SOC_SSM4567=m
+CONFIG_SND_SOC_STA32X=m
+CONFIG_SND_SOC_STA350=m
+CONFIG_SND_SOC_STI_SAS=m
+CONFIG_SND_SOC_TAS2552=m
+CONFIG_SND_SOC_TAS5086=m
+CONFIG_SND_SOC_TAS571X=m
+CONFIG_SND_SOC_TAS5720=m
+CONFIG_SND_SOC_TAS6424=m
+CONFIG_SND_SOC_TDA7419=m
+CONFIG_SND_SOC_TFA9879=m
+CONFIG_SND_SOC_TLV320AIC23=m
+CONFIG_SND_SOC_TLV320AIC23_I2C=m
+CONFIG_SND_SOC_TLV320AIC23_SPI=m
+CONFIG_SND_SOC_TLV320AIC31XX=m
+CONFIG_SND_SOC_TLV320AIC32X4=m
+CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
+CONFIG_SND_SOC_TLV320AIC32X4_SPI=m
+CONFIG_SND_SOC_TLV320AIC3X=m
+CONFIG_SND_SOC_TS3A227E=m
+CONFIG_SND_SOC_TSCS42XX=m
+CONFIG_SND_SOC_TSCS454=m
+CONFIG_SND_SOC_WM8510=m
+CONFIG_SND_SOC_WM8523=m
+CONFIG_SND_SOC_WM8524=m
+CONFIG_SND_SOC_WM8580=m
+CONFIG_SND_SOC_WM8711=m
+CONFIG_SND_SOC_WM8728=m
+CONFIG_SND_SOC_WM8731=m
+CONFIG_SND_SOC_WM8737=m
+CONFIG_SND_SOC_WM8741=m
+CONFIG_SND_SOC_WM8750=m
+CONFIG_SND_SOC_WM8753=m
+CONFIG_SND_SOC_WM8770=m
+CONFIG_SND_SOC_WM8776=m
+CONFIG_SND_SOC_WM8782=m
+CONFIG_SND_SOC_WM8804=m
+CONFIG_SND_SOC_WM8804_I2C=m
+CONFIG_SND_SOC_WM8804_SPI=m
+CONFIG_SND_SOC_WM8903=m
+CONFIG_SND_SOC_WM8960=m
+CONFIG_SND_SOC_WM8962=m
+CONFIG_SND_SOC_WM8974=m
+CONFIG_SND_SOC_WM8978=m
+CONFIG_SND_SOC_WM8985=m
+CONFIG_SND_SOC_ZX_AUD96P22=m
+CONFIG_SND_SOC_MAX9759=m
+CONFIG_SND_SOC_MT6351=m
+CONFIG_SND_SOC_NAU8540=m
+CONFIG_SND_SOC_NAU8810=m
+CONFIG_SND_SOC_NAU8824=m
+CONFIG_SND_SOC_NAU8825=m
+CONFIG_SND_SOC_TPA6130A2=m
+CONFIG_SND_SIMPLE_CARD_UTILS=m
+CONFIG_SND_SIMPLE_CARD=m
+CONFIG_SND_X86=y
+CONFIG_HDMI_LPE_AUDIO=m
+CONFIG_SND_SYNTH_EMUX=m
+CONFIG_AC97_BUS=m
+
+#
+# HID support
+#
+CONFIG_HID=m
+CONFIG_HID_BATTERY_STRENGTH=y
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+CONFIG_HID_GENERIC=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACCUTOUCH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=m
+CONFIG_HID_APPLEIR=m
+CONFIG_HID_ASUS=m
+CONFIG_HID_AUREAL=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BETOP_FF=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CORSAIR=m
+# CONFIG_HID_COUGAR is not set
+CONFIG_HID_PRODIKEYS=m
+CONFIG_HID_CMEDIA=m
+CONFIG_HID_CP2112=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELAN=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_ELO=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GEMBIRD=m
+CONFIG_HID_GFRM=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HOLTEK_FF=y
+CONFIG_HID_GOOGLE_HAMMER=m
+CONFIG_HID_GT683R=m
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_ICADE=m
+CONFIG_HID_ITE=m
+CONFIG_HID_JABRA=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LED=m
+CONFIG_HID_LENOVO=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_HID_LOGITECH_HIDPP=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWHEELS_FF=y
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MAYFLASH=m
+CONFIG_HID_REDRAGON=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTI=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PENMOUNT=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_PICOLCD_FB=y
+CONFIG_HID_PICOLCD_BACKLIGHT=y
+CONFIG_HID_PICOLCD_LCD=y
+CONFIG_HID_PICOLCD_LEDS=y
+CONFIG_HID_PICOLCD_CIR=y
+CONFIG_HID_PLANTRONICS=m
+CONFIG_HID_PRIMAX=m
+CONFIG_HID_RETRODE=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAITEK=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_SONY_FF=y
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_STEAM=m
+CONFIG_HID_STEELSERIES=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_RMI=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_HYPERV_MOUSE=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TIVO=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THINGM=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_UDRAW_PS3=m
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_XINMO=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=m
+CONFIG_HID_SENSOR_HUB=m
+CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
+CONFIG_HID_ALPS=m
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# I2C HID support
+#
+CONFIG_I2C_HID=m
+
+#
+# Intel ISH HID support
+#
+CONFIG_INTEL_ISH_HID=m
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=m
+CONFIG_USB_PCI=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEFAULT_PERSIST=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_OTG_FSM=m
+CONFIG_USB_LEDS_TRIGGER_USBPORT=m
+CONFIG_USB_MON=m
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=m
+CONFIG_USB_XHCI_HCD=m
+CONFIG_USB_XHCI_DBGCAP=y
+CONFIG_USB_XHCI_PCI=m
+CONFIG_USB_XHCI_PLATFORM=m
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_EHCI_PCI=m
+CONFIG_USB_EHCI_HCD_PLATFORM=m
+CONFIG_USB_OXU210HP_HCD=m
+CONFIG_USB_ISP116X_HCD=m
+CONFIG_USB_FOTG210_HCD=m
+CONFIG_USB_MAX3421_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PCI=m
+CONFIG_USB_OHCI_HCD_SSB=y
+CONFIG_USB_OHCI_HCD_PLATFORM=m
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_HCD_ISO is not set
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+CONFIG_USB_HCD_BCMA=m
+CONFIG_USB_HCD_SSB=m
+# CONFIG_USB_HCD_TEST_MODE is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_REALTEK_AUTOPM=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USBIP_CORE=m
+CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_VHCI_HC_PORTS=8
+CONFIG_USBIP_VHCI_NR_HCS=1
+CONFIG_USBIP_HOST=m
+CONFIG_USBIP_VUDC=m
+# CONFIG_USBIP_DEBUG is not set
+CONFIG_USB_MUSB_HDRC=m
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_GADGET is not set
+CONFIG_USB_MUSB_DUAL_ROLE=y
+
+#
+# Platform Glue Layer
+#
+
+#
+# MUSB DMA mode
+#
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_DWC3=m
+# CONFIG_USB_DWC3_ULPI is not set
+# CONFIG_USB_DWC3_HOST is not set
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_DWC3_DUAL_ROLE=y
+
+#
+# Platform Glue Driver Support
+#
+CONFIG_USB_DWC3_PCI=m
+CONFIG_USB_DWC3_HAPS=m
+CONFIG_USB_DWC2=m
+# CONFIG_USB_DWC2_HOST is not set
+
+#
+# Gadget/Dual-role mode requires USB Gadget support to be enabled
+#
+# CONFIG_USB_DWC2_PERIPHERAL is not set
+CONFIG_USB_DWC2_DUAL_ROLE=y
+CONFIG_USB_DWC2_PCI=m
+# CONFIG_USB_DWC2_DEBUG is not set
+# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_PCI=m
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=m
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1761_UDC=y
+# CONFIG_USB_ISP1760_HOST_ROLE is not set
+# CONFIG_USB_ISP1760_GADGET_ROLE is not set
+CONFIG_USB_ISP1760_DUAL_ROLE=y
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_F8153X=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7715_PARPORT=y
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MXUPORT=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_XSENS_MT=m
+CONFIG_USB_SERIAL_WISHBONE=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+# CONFIG_USB_SERIAL_UPD78F0730 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_EHSET_TEST_FIXTURE=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_USB_EZUSB_FX2=m
+CONFIG_USB_HUB_USB251XB=m
+CONFIG_USB_HSIC_USB3503=m
+CONFIG_USB_HSIC_USB4604=m
+CONFIG_USB_LINK_LAYER_TEST=m
+CONFIG_USB_CHAOSKEY=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_PHY=y
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_TAHVO_USB=m
+CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
+CONFIG_USB_ISP1301=m
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
+CONFIG_U_SERIAL_CONSOLE=y
+
+#
+# USB Peripheral Controller
+#
+CONFIG_USB_FOTG210_UDC=m
+CONFIG_USB_GR_UDC=m
+CONFIG_USB_R8A66597=m
+CONFIG_USB_PXA27X=m
+CONFIG_USB_MV_UDC=m
+CONFIG_USB_MV_U3D=m
+CONFIG_USB_SNP_CORE=m
+CONFIG_USB_M66592=m
+CONFIG_USB_BDC_UDC=m
+
+#
+# Platform Support
+#
+CONFIG_USB_BDC_PCI=m
+CONFIG_USB_AMD5536UDC=m
+CONFIG_USB_NET2272=m
+CONFIG_USB_NET2272_DMA=y
+CONFIG_USB_NET2280=m
+CONFIG_USB_GOKU=m
+CONFIG_USB_EG20T=m
+# CONFIG_USB_DUMMY_HCD is not set
+CONFIG_USB_LIBCOMPOSITE=m
+CONFIG_USB_F_ACM=m
+CONFIG_USB_F_SS_LB=m
+CONFIG_USB_U_SERIAL=m
+CONFIG_USB_U_ETHER=m
+CONFIG_USB_U_AUDIO=m
+CONFIG_USB_F_SERIAL=m
+CONFIG_USB_F_OBEX=m
+CONFIG_USB_F_NCM=m
+CONFIG_USB_F_ECM=m
+CONFIG_USB_F_PHONET=m
+CONFIG_USB_F_EEM=m
+CONFIG_USB_F_SUBSET=m
+CONFIG_USB_F_RNDIS=m
+CONFIG_USB_F_MASS_STORAGE=m
+CONFIG_USB_F_FS=m
+CONFIG_USB_F_UAC1=m
+CONFIG_USB_F_UAC2=m
+CONFIG_USB_F_UVC=m
+CONFIG_USB_F_MIDI=m
+CONFIG_USB_F_HID=m
+CONFIG_USB_F_PRINTER=m
+CONFIG_USB_F_TCM=m
+CONFIG_USB_CONFIGFS=m
+CONFIG_USB_CONFIGFS_SERIAL=y
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_OBEX=y
+CONFIG_USB_CONFIGFS_NCM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
+CONFIG_USB_CONFIGFS_RNDIS=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_PHONET=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_F_LB_SS=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_CONFIGFS_F_UAC1=y
+# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set
+CONFIG_USB_CONFIGFS_F_UAC2=y
+CONFIG_USB_CONFIGFS_F_MIDI=y
+CONFIG_USB_CONFIGFS_F_HID=y
+CONFIG_USB_CONFIGFS_F_UVC=y
+CONFIG_USB_CONFIGFS_F_PRINTER=y
+CONFIG_USB_CONFIGFS_F_TCM=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ZERO_HNPTEST=y
+CONFIG_USB_AUDIO=m
+CONFIG_GADGET_UAC1=y
+# CONFIG_GADGET_UAC1_LEGACY is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_ETH_EEM=y
+CONFIG_USB_G_NCM=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FUNCTIONFS=m
+CONFIG_USB_FUNCTIONFS_ETH=y
+CONFIG_USB_FUNCTIONFS_RNDIS=y
+CONFIG_USB_FUNCTIONFS_GENERIC=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_GADGET_TARGET=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_NOKIA=m
+CONFIG_USB_G_ACM_MS=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_RNDIS=y
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_USB_G_HID=m
+# CONFIG_USB_G_DBGP is not set
+CONFIG_USB_G_WEBCAM=m
+CONFIG_TYPEC=m
+CONFIG_TYPEC_TCPM=m
+CONFIG_TYPEC_TCPCI=m
+CONFIG_TYPEC_RT1711H=m
+CONFIG_TYPEC_FUSB302=m
+CONFIG_TYPEC_UCSI=m
+CONFIG_UCSI_ACPI=m
+CONFIG_TYPEC_TPS6598X=m
+
+#
+# USB Type-C Multiplexer/DeMultiplexer Switch support
+#
+CONFIG_TYPEC_MUX_PI3USB30532=m
+
+#
+# USB Type-C Alternate Mode drivers
+#
+# CONFIG_TYPEC_DP_ALTMODE is not set
+CONFIG_USB_ROLE_SWITCH=m
+CONFIG_USB_ROLES_INTEL_XHCI=m
+CONFIG_USB_LED_TRIG=y
+CONFIG_USB_ULPI_BUS=m
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI_ACPI=m
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_SDHCI_F_SDH30=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SPI=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+CONFIG_MMC_VUB300=m
+CONFIG_MMC_USHC=m
+CONFIG_MMC_USDHI6ROL0=m
+CONFIG_MMC_REALTEK_PCI=m
+CONFIG_MMC_REALTEK_USB=m
+CONFIG_MMC_CQHCI=m
+CONFIG_MMC_TOSHIBA_PCI=m
+CONFIG_MMC_MTK=m
+CONFIG_MMC_SDHCI_XENON=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+CONFIG_MS_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_MEMSTICK_REALTEK_PCI=m
+CONFIG_MEMSTICK_REALTEK_USB=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=m
+# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
+
+#
+# LED drivers
+#
+CONFIG_LEDS_APU=m
+CONFIG_LEDS_AS3645A=m
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_LM3533=m
+CONFIG_LEDS_LM3642=m
+CONFIG_LEDS_LM3601X=m
+CONFIG_LEDS_MT6323=m
+CONFIG_LEDS_PCA9532=m
+CONFIG_LEDS_PCA9532_GPIO=y
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP3952=m
+CONFIG_LEDS_LP55XX_COMMON=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_LP5562=m
+CONFIG_LEDS_LP8501=m
+CONFIG_LEDS_CLEVO_MAIL=m
+CONFIG_LEDS_PCA955X=m
+# CONFIG_LEDS_PCA955X_GPIO is not set
+CONFIG_LEDS_PCA963X=m
+CONFIG_LEDS_WM831X_STATUS=m
+CONFIG_LEDS_DA9052=m
+CONFIG_LEDS_DAC124S085=m
+CONFIG_LEDS_PWM=m
+CONFIG_LEDS_REGULATOR=m
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_INTEL_SS4200=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_MC13783=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_TLC591XX=m
+CONFIG_LEDS_LM355x=m
+CONFIG_LEDS_MENF21BMC=m
+
+#
+# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
+#
+CONFIG_LEDS_BLINKM=m
+CONFIG_LEDS_MLXCPLD=m
+CONFIG_LEDS_MLXREG=m
+CONFIG_LEDS_USER=m
+CONFIG_LEDS_NIC78BX=m
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_ONESHOT=m
+CONFIG_LEDS_TRIGGER_DISK=y
+# CONFIG_LEDS_TRIGGER_MTD is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_ACTIVITY=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_LEDS_TRIGGER_CAMERA=m
+CONFIG_LEDS_TRIGGER_PANIC=y
+CONFIG_LEDS_TRIGGER_NETDEV=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_QIB=m
+CONFIG_INFINIBAND_QIB_DCA=y
+CONFIG_INFINIBAND_CXGB3=m
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_INFINIBAND_I40IW=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_MLX5_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_OCRDMA=m
+CONFIG_INFINIBAND_VMWARE_PVRDMA=m
+CONFIG_INFINIBAND_USNIC=m
+CONFIG_INFINIBAND_IPOIB=m
+CONFIG_INFINIBAND_IPOIB_CM=y
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_SRPT=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_INFINIBAND_ISERT=m
+CONFIG_INFINIBAND_OPA_VNIC=m
+CONFIG_INFINIBAND_RDMAVT=m
+CONFIG_RDMA_RXE=m
+CONFIG_INFINIBAND_HFI1=m
+# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set
+# CONFIG_SDMA_VERBOSITY is not set
+CONFIG_INFINIBAND_QEDR=m
+CONFIG_INFINIBAND_BNXT_RE=m
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EDAC=y
+CONFIG_EDAC_LEGACY_SYSFS=y
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=m
+CONFIG_EDAC_GHES=y
+CONFIG_EDAC_AMD64=m
+CONFIG_EDAC_AMD64_ERROR_INJECTION=y
+CONFIG_EDAC_E752X=m
+CONFIG_EDAC_I82975X=m
+CONFIG_EDAC_I3000=m
+CONFIG_EDAC_I3200=m
+CONFIG_EDAC_IE31200=m
+CONFIG_EDAC_X38=m
+CONFIG_EDAC_I5400=m
+CONFIG_EDAC_I7CORE=m
+CONFIG_EDAC_I5000=m
+CONFIG_EDAC_I5100=m
+CONFIG_EDAC_I7300=m
+CONFIG_EDAC_SBRIDGE=m
+CONFIG_EDAC_SKX=m
+CONFIG_EDAC_PND2=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_SYSTOHC=y
+CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+CONFIG_RTC_NVMEM=y
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_88PM80X=m
+CONFIG_RTC_DRV_ABB5ZES3=m
+CONFIG_RTC_DRV_ABX80X=m
+CONFIG_RTC_DRV_DS1307=m
+# CONFIG_RTC_DRV_DS1307_CENTURY is not set
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1374_WDT=y
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_MAX8907=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8523=m
+CONFIG_RTC_DRV_PCF85063=m
+CONFIG_RTC_DRV_PCF85363=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8010=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV8803=m
+
+#
+# SPI RTC drivers
+#
+CONFIG_RTC_DRV_M41T93=m
+CONFIG_RTC_DRV_M41T94=m
+CONFIG_RTC_DRV_DS1302=m
+CONFIG_RTC_DRV_DS1305=m
+CONFIG_RTC_DRV_DS1343=m
+CONFIG_RTC_DRV_DS1347=m
+CONFIG_RTC_DRV_DS1390=m
+CONFIG_RTC_DRV_MAX6916=m
+CONFIG_RTC_DRV_R9701=m
+CONFIG_RTC_DRV_RX4581=m
+CONFIG_RTC_DRV_RX6110=m
+CONFIG_RTC_DRV_RS5C348=m
+CONFIG_RTC_DRV_MAX6902=m
+CONFIG_RTC_DRV_PCF2123=m
+CONFIG_RTC_DRV_MCP795=m
+CONFIG_RTC_I2C_AND_SPI=m
+
+#
+# SPI and I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_DS3232_HWMON=y
+CONFIG_RTC_DRV_PCF2127=m
+CONFIG_RTC_DRV_RV3029C2=m
+CONFIG_RTC_DRV_RV3029_HWMON=y
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1685_FAMILY=m
+CONFIG_RTC_DRV_DS1685=y
+# CONFIG_RTC_DRV_DS1689 is not set
+# CONFIG_RTC_DRV_DS17285 is not set
+# CONFIG_RTC_DRV_DS17485 is not set
+# CONFIG_RTC_DRV_DS17885 is not set
+CONFIG_RTC_DS1685_PROC_REGS=y
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_DS2404=m
+CONFIG_RTC_DRV_DA9052=m
+CONFIG_RTC_DRV_DA9063=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_WM831X=m
+CONFIG_RTC_DRV_PCF50633=m
+# CONFIG_RTC_DRV_CROS_EC is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_FTRTC010=m
+CONFIG_RTC_DRV_PCAP=m
+CONFIG_RTC_DRV_MC13XXX=m
+CONFIG_RTC_DRV_MT6397=m
+
+#
+# HID Sensor RTC drivers
+#
+CONFIG_RTC_DRV_HID_SENSOR_TIME=m
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DMA_ACPI=y
+CONFIG_ALTERA_MSGDMA=m
+CONFIG_INTEL_IDMA64=m
+CONFIG_INTEL_IOATDMA=m
+CONFIG_INTEL_MIC_X100_DMA=m
+CONFIG_QCOM_HIDMA_MGMT=m
+CONFIG_QCOM_HIDMA=m
+CONFIG_DW_DMAC_CORE=y
+CONFIG_DW_DMAC=m
+CONFIG_DW_DMAC_PCI=y
+CONFIG_HSU_DMA=y
+
+#
+# DMA Clients
+#
+CONFIG_ASYNC_TX_DMA=y
+# CONFIG_DMATEST is not set
+CONFIG_DMA_ENGINE_RAID=y
+
+#
+# DMABUF options
+#
+CONFIG_SYNC_FILE=y
+# CONFIG_SW_SYNC is not set
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+CONFIG_HD44780=m
+CONFIG_KS0108=m
+CONFIG_KS0108_PORT=0x378
+CONFIG_KS0108_DELAY=2
+CONFIG_CFAG12864B=m
+CONFIG_CFAG12864B_RATE=20
+CONFIG_IMG_ASCII_LCD=m
+CONFIG_PANEL=m
+CONFIG_PANEL_PARPORT=0
+CONFIG_PANEL_PROFILE=5
+# CONFIG_PANEL_CHANGE_MESSAGE is not set
+CONFIG_CHARLCD=m
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_DMEM_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_UIO_PRUSS=m
+CONFIG_UIO_MF624=m
+CONFIG_UIO_HV_GENERIC=m
+CONFIG_VFIO_IOMMU_TYPE1=m
+CONFIG_VFIO_VIRQFD=m
+CONFIG_VFIO=m
+# CONFIG_VFIO_NOIOMMU is not set
+CONFIG_VFIO_PCI=m
+CONFIG_VFIO_PCI_VGA=y
+CONFIG_VFIO_PCI_MMAP=y
+CONFIG_VFIO_PCI_INTX=y
+CONFIG_VFIO_PCI_IGD=y
+CONFIG_VFIO_MDEV=m
+CONFIG_VFIO_MDEV_DEVICE=m
+CONFIG_IRQ_BYPASS_MANAGER=m
+CONFIG_VIRT_DRIVERS=y
+# CONFIG_VBOXGUEST is not set
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_PCI_LEGACY=y
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_INPUT=m
+CONFIG_VIRTIO_MMIO=m
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_HYPERV=m
+CONFIG_HYPERV_TSCPAGE=y
+CONFIG_HYPERV_UTILS=m
+CONFIG_HYPERV_BALLOON=m
+CONFIG_STAGING=y
+CONFIG_PRISM2_USB=m
+CONFIG_COMEDI=m
+# CONFIG_COMEDI_DEBUG is not set
+CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
+CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
+CONFIG_COMEDI_MISC_DRIVERS=y
+CONFIG_COMEDI_BOND=m
+CONFIG_COMEDI_TEST=m
+CONFIG_COMEDI_PARPORT=m
+CONFIG_COMEDI_ISA_DRIVERS=y
+CONFIG_COMEDI_PCL711=m
+CONFIG_COMEDI_PCL724=m
+CONFIG_COMEDI_PCL726=m
+CONFIG_COMEDI_PCL730=m
+CONFIG_COMEDI_PCL812=m
+CONFIG_COMEDI_PCL816=m
+CONFIG_COMEDI_PCL818=m
+CONFIG_COMEDI_PCM3724=m
+CONFIG_COMEDI_AMPLC_DIO200_ISA=m
+CONFIG_COMEDI_AMPLC_PC236_ISA=m
+CONFIG_COMEDI_AMPLC_PC263_ISA=m
+CONFIG_COMEDI_RTI800=m
+CONFIG_COMEDI_RTI802=m
+CONFIG_COMEDI_DAC02=m
+CONFIG_COMEDI_DAS16M1=m
+CONFIG_COMEDI_DAS08_ISA=m
+CONFIG_COMEDI_DAS16=m
+CONFIG_COMEDI_DAS800=m
+CONFIG_COMEDI_DAS1800=m
+CONFIG_COMEDI_DAS6402=m
+CONFIG_COMEDI_DT2801=m
+CONFIG_COMEDI_DT2811=m
+CONFIG_COMEDI_DT2814=m
+CONFIG_COMEDI_DT2815=m
+CONFIG_COMEDI_DT2817=m
+CONFIG_COMEDI_DT282X=m
+CONFIG_COMEDI_DMM32AT=m
+CONFIG_COMEDI_FL512=m
+CONFIG_COMEDI_AIO_AIO12_8=m
+CONFIG_COMEDI_AIO_IIRO_16=m
+CONFIG_COMEDI_II_PCI20KC=m
+CONFIG_COMEDI_C6XDIGIO=m
+CONFIG_COMEDI_MPC624=m
+CONFIG_COMEDI_ADQ12B=m
+CONFIG_COMEDI_NI_AT_A2150=m
+CONFIG_COMEDI_NI_AT_AO=m
+CONFIG_COMEDI_NI_ATMIO=m
+CONFIG_COMEDI_NI_ATMIO16D=m
+CONFIG_COMEDI_NI_LABPC_ISA=m
+CONFIG_COMEDI_PCMAD=m
+CONFIG_COMEDI_PCMDA12=m
+CONFIG_COMEDI_PCMMIO=m
+CONFIG_COMEDI_PCMUIO=m
+CONFIG_COMEDI_MULTIQ3=m
+CONFIG_COMEDI_S526=m
+CONFIG_COMEDI_PCI_DRIVERS=m
+CONFIG_COMEDI_8255_PCI=m
+CONFIG_COMEDI_ADDI_WATCHDOG=m
+CONFIG_COMEDI_ADDI_APCI_1032=m
+CONFIG_COMEDI_ADDI_APCI_1500=m
+CONFIG_COMEDI_ADDI_APCI_1516=m
+CONFIG_COMEDI_ADDI_APCI_1564=m
+CONFIG_COMEDI_ADDI_APCI_16XX=m
+CONFIG_COMEDI_ADDI_APCI_2032=m
+CONFIG_COMEDI_ADDI_APCI_2200=m
+CONFIG_COMEDI_ADDI_APCI_3120=m
+CONFIG_COMEDI_ADDI_APCI_3501=m
+CONFIG_COMEDI_ADDI_APCI_3XXX=m
+CONFIG_COMEDI_ADL_PCI6208=m
+CONFIG_COMEDI_ADL_PCI7X3X=m
+CONFIG_COMEDI_ADL_PCI8164=m
+CONFIG_COMEDI_ADL_PCI9111=m
+CONFIG_COMEDI_ADL_PCI9118=m
+CONFIG_COMEDI_ADV_PCI1710=m
+CONFIG_COMEDI_ADV_PCI1720=m
+CONFIG_COMEDI_ADV_PCI1723=m
+CONFIG_COMEDI_ADV_PCI1724=m
+CONFIG_COMEDI_ADV_PCI1760=m
+CONFIG_COMEDI_ADV_PCI_DIO=m
+CONFIG_COMEDI_AMPLC_DIO200_PCI=m
+CONFIG_COMEDI_AMPLC_PC236_PCI=m
+CONFIG_COMEDI_AMPLC_PC263_PCI=m
+CONFIG_COMEDI_AMPLC_PCI224=m
+CONFIG_COMEDI_AMPLC_PCI230=m
+CONFIG_COMEDI_CONTEC_PCI_DIO=m
+CONFIG_COMEDI_DAS08_PCI=m
+CONFIG_COMEDI_DT3000=m
+CONFIG_COMEDI_DYNA_PCI10XX=m
+CONFIG_COMEDI_GSC_HPDI=m
+CONFIG_COMEDI_MF6X4=m
+CONFIG_COMEDI_ICP_MULTI=m
+CONFIG_COMEDI_DAQBOARD2000=m
+CONFIG_COMEDI_JR3_PCI=m
+CONFIG_COMEDI_KE_COUNTER=m
+CONFIG_COMEDI_CB_PCIDAS64=m
+CONFIG_COMEDI_CB_PCIDAS=m
+CONFIG_COMEDI_CB_PCIDDA=m
+CONFIG_COMEDI_CB_PCIMDAS=m
+CONFIG_COMEDI_CB_PCIMDDA=m
+CONFIG_COMEDI_ME4000=m
+CONFIG_COMEDI_ME_DAQ=m
+CONFIG_COMEDI_NI_6527=m
+CONFIG_COMEDI_NI_65XX=m
+CONFIG_COMEDI_NI_660X=m
+CONFIG_COMEDI_NI_670X=m
+CONFIG_COMEDI_NI_LABPC_PCI=m
+CONFIG_COMEDI_NI_PCIDIO=m
+CONFIG_COMEDI_NI_PCIMIO=m
+CONFIG_COMEDI_RTD520=m
+CONFIG_COMEDI_S626=m
+CONFIG_COMEDI_MITE=m
+CONFIG_COMEDI_NI_TIOCMD=m
+CONFIG_COMEDI_PCMCIA_DRIVERS=m
+CONFIG_COMEDI_CB_DAS16_CS=m
+CONFIG_COMEDI_DAS08_CS=m
+CONFIG_COMEDI_NI_DAQ_700_CS=m
+CONFIG_COMEDI_NI_DAQ_DIO24_CS=m
+CONFIG_COMEDI_NI_LABPC_CS=m
+CONFIG_COMEDI_NI_MIO_CS=m
+CONFIG_COMEDI_QUATECH_DAQP_CS=m
+CONFIG_COMEDI_USB_DRIVERS=m
+CONFIG_COMEDI_DT9812=m
+CONFIG_COMEDI_NI_USB6501=m
+CONFIG_COMEDI_USBDUX=m
+CONFIG_COMEDI_USBDUXFAST=m
+CONFIG_COMEDI_USBDUXSIGMA=m
+CONFIG_COMEDI_VMK80XX=m
+CONFIG_COMEDI_8254=m
+CONFIG_COMEDI_8255=m
+CONFIG_COMEDI_8255_SA=m
+CONFIG_COMEDI_KCOMEDILIB=m
+CONFIG_COMEDI_AMPLC_DIO200=m
+CONFIG_COMEDI_AMPLC_PC236=m
+CONFIG_COMEDI_DAS08=m
+CONFIG_COMEDI_ISADMA=m
+CONFIG_COMEDI_NI_LABPC=m
+CONFIG_COMEDI_NI_LABPC_ISADMA=m
+CONFIG_COMEDI_NI_TIO=m
+CONFIG_RTL8192U=m
+CONFIG_RTLLIB=m
+CONFIG_RTLLIB_CRYPTO_CCMP=m
+CONFIG_RTLLIB_CRYPTO_TKIP=m
+CONFIG_RTLLIB_CRYPTO_WEP=m
+CONFIG_RTL8192E=m
+CONFIG_RTL8723BS=m
+CONFIG_R8712U=m
+CONFIG_R8188EU=m
+CONFIG_88EU_AP_MODE=y
+CONFIG_R8822BE=m
+CONFIG_RTLWIFI_DEBUG_ST=y
+CONFIG_RTS5208=m
+CONFIG_VT6655=m
+CONFIG_VT6656=m
+
+#
+# IIO staging drivers
+#
+
+#
+# Accelerometers
+#
+CONFIG_ADIS16203=m
+CONFIG_ADIS16240=m
+
+#
+# Analog to digital converters
+#
+CONFIG_AD7606=m
+CONFIG_AD7606_IFACE_PARALLEL=m
+CONFIG_AD7606_IFACE_SPI=m
+CONFIG_AD7780=m
+CONFIG_AD7816=m
+CONFIG_AD7192=m
+CONFIG_AD7280=m
+
+#
+# Analog digital bi-direction converters
+#
+CONFIG_ADT7316=m
+CONFIG_ADT7316_SPI=m
+CONFIG_ADT7316_I2C=m
+
+#
+# Capacitance to digital converters
+#
+CONFIG_AD7150=m
+CONFIG_AD7152=m
+CONFIG_AD7746=m
+
+#
+# Direct Digital Synthesis
+#
+CONFIG_AD9832=m
+CONFIG_AD9834=m
+
+#
+# Network Analyzer, Impedance Converters
+#
+CONFIG_AD5933=m
+
+#
+# Active energy metering IC
+#
+CONFIG_ADE7854=m
+CONFIG_ADE7854_I2C=m
+CONFIG_ADE7854_SPI=m
+
+#
+# Resolver to digital converters
+#
+CONFIG_AD2S90=m
+CONFIG_AD2S1210=m
+CONFIG_FB_SM750=m
+CONFIG_FB_XGI=m
+
+#
+# Speakup console speech
+#
+CONFIG_SPEAKUP=m
+CONFIG_SPEAKUP_SYNTH_ACNTSA=m
+CONFIG_SPEAKUP_SYNTH_APOLLO=m
+CONFIG_SPEAKUP_SYNTH_AUDPTR=m
+CONFIG_SPEAKUP_SYNTH_BNS=m
+CONFIG_SPEAKUP_SYNTH_DECTLK=m
+CONFIG_SPEAKUP_SYNTH_DECEXT=m
+CONFIG_SPEAKUP_SYNTH_LTLK=m
+CONFIG_SPEAKUP_SYNTH_SOFT=m
+CONFIG_SPEAKUP_SYNTH_SPKOUT=m
+CONFIG_SPEAKUP_SYNTH_TXPRT=m
+# CONFIG_SPEAKUP_SYNTH_DUMMY is not set
+CONFIG_STAGING_MEDIA=y
+CONFIG_I2C_BCM2048=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+
+#
+# Android
+#
+CONFIG_LTE_GDM724X=m
+CONFIG_FIREWIRE_SERIAL=m
+CONFIG_FWTTY_MAX_TOTAL_PORTS=64
+CONFIG_FWTTY_MAX_CARD_PORTS=32
+CONFIG_MTD_SPINAND_MT29F=m
+CONFIG_MTD_SPINAND_ONDIEECC=y
+CONFIG_DGNC=m
+CONFIG_GS_FPGABOOT=m
+CONFIG_UNISYSSPAR=y
+CONFIG_FB_TFT=m
+CONFIG_FB_TFT_AGM1264K_FL=m
+CONFIG_FB_TFT_BD663474=m
+CONFIG_FB_TFT_HX8340BN=m
+CONFIG_FB_TFT_HX8347D=m
+CONFIG_FB_TFT_HX8353D=m
+# CONFIG_FB_TFT_HX8357D is not set
+# CONFIG_FB_TFT_ILI9163 is not set
+CONFIG_FB_TFT_ILI9320=m
+CONFIG_FB_TFT_ILI9325=m
+CONFIG_FB_TFT_ILI9340=m
+CONFIG_FB_TFT_ILI9341=m
+CONFIG_FB_TFT_ILI9481=m
+CONFIG_FB_TFT_ILI9486=m
+CONFIG_FB_TFT_PCD8544=m
+CONFIG_FB_TFT_RA8875=m
+CONFIG_FB_TFT_S6D02A1=m
+CONFIG_FB_TFT_S6D1121=m
+CONFIG_FB_TFT_SH1106=m
+CONFIG_FB_TFT_SSD1289=m
+CONFIG_FB_TFT_SSD1305=m
+CONFIG_FB_TFT_SSD1306=m
+CONFIG_FB_TFT_SSD1331=m
+CONFIG_FB_TFT_SSD1351=m
+CONFIG_FB_TFT_ST7735R=m
+CONFIG_FB_TFT_ST7789V=m
+CONFIG_FB_TFT_TINYLCD=m
+CONFIG_FB_TFT_TLS8204=m
+CONFIG_FB_TFT_UC1611=m
+CONFIG_FB_TFT_UC1701=m
+CONFIG_FB_TFT_UPD161704=m
+CONFIG_FB_TFT_WATTEROTT=m
+CONFIG_FB_FLEX=m
+CONFIG_FB_TFT_FBTFT_DEVICE=m
+CONFIG_WILC1000=m
+CONFIG_WILC1000_SDIO=m
+CONFIG_WILC1000_SPI=m
+# CONFIG_WILC1000_HW_OOB_INTR is not set
+CONFIG_MOST=m
+CONFIG_MOST_CDEV=m
+CONFIG_MOST_NET=m
+CONFIG_MOST_SOUND=m
+CONFIG_MOST_VIDEO=m
+CONFIG_MOST_I2C=m
+CONFIG_MOST_USB=m
+CONFIG_KS7010=m
+CONFIG_GREYBUS=m
+CONFIG_GREYBUS_ES2=m
+CONFIG_GREYBUS_AUDIO=m
+CONFIG_GREYBUS_BOOTROM=m
+CONFIG_GREYBUS_FIRMWARE=m
+CONFIG_GREYBUS_HID=m
+CONFIG_GREYBUS_LIGHT=m
+CONFIG_GREYBUS_LOG=m
+CONFIG_GREYBUS_LOOPBACK=m
+CONFIG_GREYBUS_POWER=m
+CONFIG_GREYBUS_RAW=m
+CONFIG_GREYBUS_VIBRATOR=m
+CONFIG_GREYBUS_BRIDGED_PHY=m
+CONFIG_GREYBUS_GPIO=m
+CONFIG_GREYBUS_I2C=m
+CONFIG_GREYBUS_PWM=m
+CONFIG_GREYBUS_SDIO=m
+CONFIG_GREYBUS_SPI=m
+CONFIG_GREYBUS_UART=m
+CONFIG_GREYBUS_USB=m
+CONFIG_DRM_VBOXVIDEO=m
+CONFIG_PI433=m
+CONFIG_MTK_MMC=m
+# CONFIG_MTK_AEE_KDUMP is not set
+# CONFIG_MTK_MMC_CD_POLL is not set
+
+#
+# Gasket devices
+#
+# CONFIG_STAGING_GASKET_FRAMEWORK is not set
+# CONFIG_EROFS_FS is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ACER_WIRELESS=m
+CONFIG_ACERHDF=m
+CONFIG_ALIENWARE_WMI=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_DELL_SMBIOS=m
+CONFIG_DELL_SMBIOS_WMI=y
+CONFIG_DELL_SMBIOS_SMM=y
+CONFIG_DELL_LAPTOP=m
+CONFIG_DELL_WMI=m
+CONFIG_DELL_WMI_DESCRIPTOR=m
+CONFIG_DELL_WMI_AIO=m
+CONFIG_DELL_WMI_LED=m
+CONFIG_DELL_SMO8800=m
+CONFIG_DELL_RBTN=m
+CONFIG_FUJITSU_LAPTOP=m
+CONFIG_FUJITSU_TABLET=m
+CONFIG_AMILO_RFKILL=m
+CONFIG_GPD_POCKET_FAN=m
+CONFIG_HP_ACCEL=m
+CONFIG_HP_WIRELESS=m
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+CONFIG_PANASONIC_LAPTOP=m
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_IDEAPAD_LAPTOP=m
+CONFIG_SURFACE3_WMI=m
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+CONFIG_INTEL_MENLOW=m
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ASUS_WMI=m
+CONFIG_ASUS_NB_WMI=m
+CONFIG_EEEPC_WMI=m
+CONFIG_ASUS_WIRELESS=m
+CONFIG_ACPI_WMI=m
+CONFIG_WMI_BMOF=m
+CONFIG_INTEL_WMI_THUNDERBOLT=m
+CONFIG_MSI_WMI=m
+CONFIG_PEAQ_WMI=m
+CONFIG_TOPSTAR_LAPTOP=m
+CONFIG_ACPI_TOSHIBA=m
+CONFIG_TOSHIBA_BT_RFKILL=m
+CONFIG_TOSHIBA_HAPS=m
+CONFIG_TOSHIBA_WMI=m
+CONFIG_ACPI_CMPC=m
+CONFIG_INTEL_CHT_INT33FE=m
+CONFIG_INTEL_INT0002_VGPIO=m
+CONFIG_INTEL_HID_EVENT=m
+CONFIG_INTEL_VBTN=m
+CONFIG_INTEL_IPS=m
+CONFIG_INTEL_PMC_CORE=y
+CONFIG_IBM_RTL=m
+CONFIG_SAMSUNG_LAPTOP=m
+CONFIG_MXM_WMI=m
+CONFIG_INTEL_OAKTRAIL=m
+CONFIG_SAMSUNG_Q10=m
+CONFIG_APPLE_GMUX=m
+CONFIG_INTEL_RST=m
+CONFIG_INTEL_SMARTCONNECT=m
+CONFIG_PVPANIC=m
+CONFIG_INTEL_PMC_IPC=m
+CONFIG_INTEL_BXTWC_PMIC_TMU=m
+CONFIG_SURFACE_PRO3_BUTTON=m
+CONFIG_SURFACE_3_BUTTON=m
+CONFIG_INTEL_PUNIT_IPC=m
+CONFIG_INTEL_TELEMETRY=m
+CONFIG_MLX_PLATFORM=m
+# CONFIG_INTEL_TURBO_MAX_3 is not set
+CONFIG_INTEL_CHTDC_TI_PWRBTN=m
+# CONFIG_I2C_MULTI_INSTANTIATE is not set
+# CONFIG_INTEL_ATOMISP2_PM is not set
+CONFIG_PMC_ATOM=y
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CHROMEOS_LAPTOP=m
+CONFIG_CHROMEOS_PSTORE=m
+CONFIG_CHROMEOS_TBMC=m
+# CONFIG_CROS_EC_I2C is not set
+# CONFIG_CROS_EC_SPI is not set
+CONFIG_CROS_EC_LPC=m
+CONFIG_CROS_EC_LPC_MEC=y
+CONFIG_CROS_EC_PROTO=y
+CONFIG_CROS_KBD_LED_BACKLIGHT=m
+CONFIG_MELLANOX_PLATFORM=y
+CONFIG_MLXREG_HOTPLUG=m
+# CONFIG_MLXREG_IO is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_COMMON_CLK=y
+
+#
+# Common Clock Framework
+#
+CONFIG_COMMON_CLK_WM831X=m
+# CONFIG_COMMON_CLK_MAX9485 is not set
+CONFIG_COMMON_CLK_SI5351=m
+CONFIG_COMMON_CLK_SI544=m
+CONFIG_COMMON_CLK_CDCE706=m
+CONFIG_COMMON_CLK_CS2000_CP=m
+CONFIG_COMMON_CLK_PWM=m
+CONFIG_HWSPINLOCK=y
+
+#
+# Clock Source drivers
+#
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_MAILBOX=y
+CONFIG_PCC=y
+CONFIG_ALTERA_MBOX=m
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+
+#
+# Generic IOMMU Pagetable Support
+#
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
+CONFIG_IOMMU_IOVA=y
+CONFIG_AMD_IOMMU=y
+CONFIG_AMD_IOMMU_V2=m
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+CONFIG_INTEL_IOMMU_SVM=y
+# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+CONFIG_IRQ_REMAP=y
+
+#
+# Remoteproc drivers
+#
+CONFIG_REMOTEPROC=m
+
+#
+# Rpmsg drivers
+#
+CONFIG_RPMSG=m
+CONFIG_RPMSG_CHAR=m
+CONFIG_RPMSG_QCOM_GLINK_NATIVE=m
+CONFIG_RPMSG_QCOM_GLINK_RPM=m
+CONFIG_RPMSG_VIRTIO=m
+CONFIG_SOUNDWIRE=y
+
+#
+# SoundWire Devices
+#
+CONFIG_SOUNDWIRE_CADENCE=m
+CONFIG_SOUNDWIRE_INTEL=m
+
+#
+# SOC (System On Chip) specific Drivers
+#
+
+#
+# Amlogic SoC drivers
+#
+
+#
+# Broadcom SoC drivers
+#
+
+#
+# NXP/Freescale QorIQ SoC drivers
+#
+
+#
+# i.MX SoC drivers
+#
+
+#
+# Qualcomm SoC drivers
+#
+CONFIG_SOC_TI=y
+
+#
+# Xilinx SoC drivers
+#
+CONFIG_XILINX_VCU=m
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+CONFIG_DEVFREQ_GOV_PASSIVE=m
+
+#
+# DEVFREQ Drivers
+#
+CONFIG_PM_DEVFREQ_EVENT=y
+CONFIG_EXTCON=y
+
+#
+# Extcon Device Drivers
+#
+CONFIG_EXTCON_ADC_JACK=m
+CONFIG_EXTCON_ARIZONA=m
+CONFIG_EXTCON_AXP288=m
+CONFIG_EXTCON_GPIO=m
+# CONFIG_EXTCON_INTEL_INT3496 is not set
+CONFIG_EXTCON_MAX14577=m
+CONFIG_EXTCON_MAX3355=m
+CONFIG_EXTCON_MAX77693=m
+CONFIG_EXTCON_RT8973A=m
+CONFIG_EXTCON_SM5502=m
+# CONFIG_EXTCON_USB_GPIO is not set
+CONFIG_EXTCON_USBC_CROS_EC=m
+CONFIG_MEMORY=y
+CONFIG_IIO=m
+CONFIG_IIO_BUFFER=y
+CONFIG_IIO_BUFFER_CB=m
+CONFIG_IIO_BUFFER_HW_CONSUMER=m
+CONFIG_IIO_KFIFO_BUF=m
+CONFIG_IIO_TRIGGERED_BUFFER=m
+CONFIG_IIO_CONFIGFS=m
+CONFIG_IIO_TRIGGER=y
+CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
+CONFIG_IIO_SW_DEVICE=m
+CONFIG_IIO_SW_TRIGGER=m
+CONFIG_IIO_TRIGGERED_EVENT=m
+
+#
+# Accelerometers
+#
+CONFIG_ADIS16201=m
+CONFIG_ADIS16209=m
+CONFIG_BMA180=m
+CONFIG_BMA220=m
+CONFIG_BMC150_ACCEL=m
+CONFIG_BMC150_ACCEL_I2C=m
+CONFIG_BMC150_ACCEL_SPI=m
+CONFIG_DA280=m
+CONFIG_DA311=m
+CONFIG_DMARD09=m
+CONFIG_DMARD10=m
+CONFIG_HID_SENSOR_ACCEL_3D=m
+CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m
+CONFIG_IIO_ST_ACCEL_3AXIS=m
+CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
+CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m
+CONFIG_KXSD9=m
+CONFIG_KXSD9_SPI=m
+CONFIG_KXSD9_I2C=m
+CONFIG_KXCJK1013=m
+CONFIG_MC3230=m
+CONFIG_MMA7455=m
+CONFIG_MMA7455_I2C=m
+CONFIG_MMA7455_SPI=m
+CONFIG_MMA7660=m
+CONFIG_MMA8452=m
+CONFIG_MMA9551_CORE=m
+CONFIG_MMA9551=m
+CONFIG_MMA9553=m
+CONFIG_MXC4005=m
+CONFIG_MXC6255=m
+CONFIG_SCA3000=m
+CONFIG_STK8312=m
+CONFIG_STK8BA50=m
+
+#
+# Analog to digital converters
+#
+CONFIG_AD_SIGMA_DELTA=m
+CONFIG_AD7266=m
+CONFIG_AD7291=m
+CONFIG_AD7298=m
+CONFIG_AD7476=m
+CONFIG_AD7766=m
+CONFIG_AD7791=m
+CONFIG_AD7793=m
+CONFIG_AD7887=m
+CONFIG_AD7923=m
+CONFIG_AD799X=m
+CONFIG_AXP20X_ADC=m
+CONFIG_AXP288_ADC=m
+CONFIG_CC10001_ADC=m
+CONFIG_DA9150_GPADC=m
+CONFIG_DLN2_ADC=m
+CONFIG_HI8435=m
+CONFIG_HX711=m
+CONFIG_INA2XX_ADC=m
+CONFIG_LTC2471=m
+CONFIG_LTC2485=m
+CONFIG_LTC2497=m
+CONFIG_MAX1027=m
+CONFIG_MAX11100=m
+CONFIG_MAX1118=m
+CONFIG_MAX1363=m
+CONFIG_MAX9611=m
+CONFIG_MCP320X=m
+CONFIG_MCP3422=m
+CONFIG_MEN_Z188_ADC=m
+CONFIG_NAU7802=m
+CONFIG_QCOM_VADC_COMMON=m
+CONFIG_QCOM_SPMI_IADC=m
+CONFIG_QCOM_SPMI_VADC=m
+CONFIG_TI_ADC081C=m
+CONFIG_TI_ADC0832=m
+CONFIG_TI_ADC084S021=m
+CONFIG_TI_ADC12138=m
+CONFIG_TI_ADC108S102=m
+CONFIG_TI_ADC128S052=m
+CONFIG_TI_ADC161S626=m
+CONFIG_TI_ADS1015=m
+CONFIG_TI_ADS7950=m
+CONFIG_TI_AM335X_ADC=m
+CONFIG_TI_TLC4541=m
+CONFIG_VIPERBOARD_ADC=m
+
+#
+# Analog Front Ends
+#
+
+#
+# Amplifiers
+#
+CONFIG_AD8366=m
+
+#
+# Chemical Sensors
+#
+CONFIG_ATLAS_PH_SENSOR=m
+# CONFIG_BME680 is not set
+CONFIG_CCS811=m
+CONFIG_IAQCORE=m
+CONFIG_VZ89X=m
+CONFIG_IIO_CROS_EC_SENSORS_CORE=m
+CONFIG_IIO_CROS_EC_SENSORS=m
+
+#
+# Hid Sensor IIO Common
+#
+CONFIG_HID_SENSOR_IIO_COMMON=m
+CONFIG_HID_SENSOR_IIO_TRIGGER=m
+CONFIG_IIO_MS_SENSORS_I2C=m
+
+#
+# SSP Sensor Common
+#
+CONFIG_IIO_SSP_SENSORS_COMMONS=m
+CONFIG_IIO_SSP_SENSORHUB=m
+CONFIG_IIO_ST_SENSORS_I2C=m
+CONFIG_IIO_ST_SENSORS_SPI=m
+CONFIG_IIO_ST_SENSORS_CORE=m
+
+#
+# Counters
+#
+
+#
+# Digital to analog converters
+#
+CONFIG_AD5064=m
+CONFIG_AD5360=m
+CONFIG_AD5380=m
+CONFIG_AD5421=m
+CONFIG_AD5446=m
+CONFIG_AD5449=m
+CONFIG_AD5592R_BASE=m
+CONFIG_AD5592R=m
+CONFIG_AD5593R=m
+CONFIG_AD5504=m
+CONFIG_AD5624R_SPI=m
+CONFIG_LTC2632=m
+CONFIG_AD5686=m
+CONFIG_AD5686_SPI=m
+CONFIG_AD5696_I2C=m
+CONFIG_AD5755=m
+# CONFIG_AD5758 is not set
+CONFIG_AD5761=m
+CONFIG_AD5764=m
+CONFIG_AD5791=m
+CONFIG_AD7303=m
+CONFIG_AD8801=m
+CONFIG_DS4424=m
+CONFIG_M62332=m
+CONFIG_MAX517=m
+CONFIG_MCP4725=m
+CONFIG_MCP4922=m
+CONFIG_TI_DAC082S085=m
+CONFIG_TI_DAC5571=m
+
+#
+# IIO dummy driver
+#
+# CONFIG_IIO_SIMPLE_DUMMY is not set
+
+#
+# Frequency Synthesizers DDS/PLL
+#
+
+#
+# Clock Generator/Distribution
+#
+CONFIG_AD9523=m
+
+#
+# Phase-Locked Loop (PLL) frequency synthesizers
+#
+CONFIG_ADF4350=m
+
+#
+# Digital gyroscope sensors
+#
+CONFIG_ADIS16080=m
+CONFIG_ADIS16130=m
+CONFIG_ADIS16136=m
+CONFIG_ADIS16260=m
+CONFIG_ADXRS450=m
+CONFIG_BMG160=m
+CONFIG_BMG160_I2C=m
+CONFIG_BMG160_SPI=m
+CONFIG_HID_SENSOR_GYRO_3D=m
+CONFIG_MPU3050=m
+CONFIG_MPU3050_I2C=m
+CONFIG_IIO_ST_GYRO_3AXIS=m
+CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
+CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
+CONFIG_ITG3200=m
+
+#
+# Health Sensors
+#
+
+#
+# Heart Rate Monitors
+#
+CONFIG_AFE4403=m
+CONFIG_AFE4404=m
+CONFIG_MAX30100=m
+CONFIG_MAX30102=m
+
+#
+# Humidity sensors
+#
+CONFIG_AM2315=m
+CONFIG_DHT11=m
+CONFIG_HDC100X=m
+CONFIG_HID_SENSOR_HUMIDITY=m
+CONFIG_HTS221=m
+CONFIG_HTS221_I2C=m
+CONFIG_HTS221_SPI=m
+CONFIG_HTU21=m
+CONFIG_SI7005=m
+CONFIG_SI7020=m
+
+#
+# Inertial measurement units
+#
+CONFIG_ADIS16400=m
+CONFIG_ADIS16480=m
+CONFIG_BMI160=m
+CONFIG_BMI160_I2C=m
+CONFIG_BMI160_SPI=m
+CONFIG_KMX61=m
+CONFIG_INV_MPU6050_IIO=m
+CONFIG_INV_MPU6050_I2C=m
+CONFIG_INV_MPU6050_SPI=m
+CONFIG_IIO_ST_LSM6DSX=m
+CONFIG_IIO_ST_LSM6DSX_I2C=m
+CONFIG_IIO_ST_LSM6DSX_SPI=m
+CONFIG_IIO_ADIS_LIB=m
+CONFIG_IIO_ADIS_LIB_BUFFER=y
+
+#
+# Light sensors
+#
+# CONFIG_ACPI_ALS is not set
+CONFIG_ADJD_S311=m
+CONFIG_AL3320A=m
+CONFIG_APDS9300=m
+CONFIG_APDS9960=m
+CONFIG_BH1750=m
+CONFIG_BH1780=m
+CONFIG_CM32181=m
+CONFIG_CM3232=m
+CONFIG_CM3323=m
+CONFIG_CM36651=m
+CONFIG_IIO_CROS_EC_LIGHT_PROX=m
+CONFIG_GP2AP020A00F=m
+CONFIG_SENSORS_ISL29018=m
+CONFIG_SENSORS_ISL29028=m
+CONFIG_ISL29125=m
+CONFIG_HID_SENSOR_ALS=m
+CONFIG_HID_SENSOR_PROX=m
+CONFIG_JSA1212=m
+CONFIG_RPR0521=m
+CONFIG_SENSORS_LM3533=m
+CONFIG_LTR501=m
+CONFIG_LV0104CS=m
+CONFIG_MAX44000=m
+CONFIG_OPT3001=m
+CONFIG_PA12203001=m
+# CONFIG_SI1133 is not set
+CONFIG_SI1145=m
+CONFIG_STK3310=m
+CONFIG_ST_UVIS25=m
+CONFIG_ST_UVIS25_I2C=m
+CONFIG_ST_UVIS25_SPI=m
+CONFIG_TCS3414=m
+CONFIG_TCS3472=m
+CONFIG_SENSORS_TSL2563=m
+CONFIG_TSL2583=m
+CONFIG_TSL2772=m
+CONFIG_TSL4531=m
+CONFIG_US5182D=m
+CONFIG_VCNL4000=m
+CONFIG_VEML6070=m
+CONFIG_VL6180=m
+CONFIG_ZOPT2201=m
+
+#
+# Magnetometer sensors
+#
+CONFIG_AK8975=m
+CONFIG_AK09911=m
+CONFIG_BMC150_MAGN=m
+CONFIG_BMC150_MAGN_I2C=m
+CONFIG_BMC150_MAGN_SPI=m
+CONFIG_MAG3110=m
+CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
+CONFIG_MMC35240=m
+CONFIG_IIO_ST_MAGN_3AXIS=m
+CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
+CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
+CONFIG_SENSORS_HMC5843=m
+CONFIG_SENSORS_HMC5843_I2C=m
+CONFIG_SENSORS_HMC5843_SPI=m
+
+#
+# Multiplexers
+#
+
+#
+# Inclinometer sensors
+#
+CONFIG_HID_SENSOR_INCLINOMETER_3D=m
+CONFIG_HID_SENSOR_DEVICE_ROTATION=m
+
+#
+# Triggers - standalone
+#
+CONFIG_IIO_HRTIMER_TRIGGER=m
+CONFIG_IIO_INTERRUPT_TRIGGER=m
+CONFIG_IIO_TIGHTLOOP_TRIGGER=m
+CONFIG_IIO_SYSFS_TRIGGER=m
+
+#
+# Digital potentiometers
+#
+CONFIG_AD5272=m
+CONFIG_DS1803=m
+CONFIG_MAX5481=m
+CONFIG_MAX5487=m
+CONFIG_MCP4018=m
+CONFIG_MCP4131=m
+CONFIG_MCP4531=m
+CONFIG_TPL0102=m
+
+#
+# Digital potentiostats
+#
+CONFIG_LMP91000=m
+
+#
+# Pressure sensors
+#
+CONFIG_ABP060MG=m
+CONFIG_BMP280=m
+CONFIG_BMP280_I2C=m
+CONFIG_BMP280_SPI=m
+CONFIG_IIO_CROS_EC_BARO=m
+CONFIG_HID_SENSOR_PRESS=m
+CONFIG_HP03=m
+CONFIG_MPL115=m
+CONFIG_MPL115_I2C=m
+CONFIG_MPL115_SPI=m
+CONFIG_MPL3115=m
+CONFIG_MS5611=m
+CONFIG_MS5611_I2C=m
+CONFIG_MS5611_SPI=m
+CONFIG_MS5637=m
+CONFIG_IIO_ST_PRESS=m
+CONFIG_IIO_ST_PRESS_I2C=m
+CONFIG_IIO_ST_PRESS_SPI=m
+CONFIG_T5403=m
+CONFIG_HP206C=m
+CONFIG_ZPA2326=m
+CONFIG_ZPA2326_I2C=m
+CONFIG_ZPA2326_SPI=m
+
+#
+# Lightning sensors
+#
+CONFIG_AS3935=m
+
+#
+# Proximity and distance sensors
+#
+# CONFIG_ISL29501 is not set
+CONFIG_LIDAR_LITE_V2=m
+CONFIG_RFD77402=m
+CONFIG_SRF04=m
+CONFIG_SX9500=m
+CONFIG_SRF08=m
+
+#
+# Resolver to digital converters
+#
+CONFIG_AD2S1200=m
+
+#
+# Temperature sensors
+#
+CONFIG_MAXIM_THERMOCOUPLE=m
+CONFIG_HID_SENSOR_TEMP=m
+CONFIG_MLX90614=m
+CONFIG_MLX90632=m
+CONFIG_TMP006=m
+CONFIG_TMP007=m
+CONFIG_TSYS01=m
+CONFIG_TSYS02D=m
+CONFIG_NTB=m
+CONFIG_NTB_AMD=m
+CONFIG_NTB_IDT=m
+CONFIG_NTB_INTEL=m
+CONFIG_NTB_SWITCHTEC=m
+CONFIG_NTB_PINGPONG=m
+CONFIG_NTB_TOOL=m
+CONFIG_NTB_PERF=m
+CONFIG_NTB_TRANSPORT=m
+CONFIG_VME_BUS=y
+
+#
+# VME Bridge Drivers
+#
+CONFIG_VME_CA91CX42=m
+CONFIG_VME_TSI148=m
+CONFIG_VME_FAKE=m
+
+#
+# VME Board Drivers
+#
+CONFIG_VMIVME_7805=m
+
+#
+# VME Device Drivers
+#
+CONFIG_VME_USER=m
+CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
+CONFIG_PWM_CROS_EC=m
+CONFIG_PWM_LP3943=m
+CONFIG_PWM_LPSS=m
+CONFIG_PWM_LPSS_PCI=m
+CONFIG_PWM_LPSS_PLATFORM=m
+CONFIG_PWM_PCA9685=m
+
+#
+# IRQ chip support
+#
+CONFIG_ARM_GIC_MAX_NR=1
+CONFIG_IPACK_BUS=m
+CONFIG_BOARD_TPCI200=m
+CONFIG_SERIAL_IPOCTAL=m
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_TI_SYSCON=m
+CONFIG_FMC=m
+CONFIG_FMC_FAKEDEV=m
+CONFIG_FMC_TRIVIAL=m
+CONFIG_FMC_WRITE_EEPROM=m
+CONFIG_FMC_CHARDEV=m
+
+#
+# PHY Subsystem
+#
+CONFIG_GENERIC_PHY=y
+CONFIG_BCM_KONA_USB2_PHY=m
+CONFIG_PHY_PXA_28NM_HSIC=m
+CONFIG_PHY_PXA_28NM_USB2=m
+CONFIG_PHY_CPCAP_USB=m
+CONFIG_PHY_QCOM_USB_HS=m
+CONFIG_PHY_QCOM_USB_HSIC=m
+CONFIG_PHY_SAMSUNG_USB2=m
+CONFIG_PHY_TUSB1210=m
+CONFIG_POWERCAP=y
+CONFIG_INTEL_RAPL=m
+# CONFIG_IDLE_INJECT is not set
+CONFIG_MCB=m
+CONFIG_MCB_PCI=m
+CONFIG_MCB_LPC=m
+
+#
+# Performance monitor support
+#
+CONFIG_RAS=y
+CONFIG_RAS_CEC=y
+CONFIG_THUNDERBOLT=m
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_LIBNVDIMM=m
+CONFIG_BLK_DEV_PMEM=m
+CONFIG_ND_BLK=m
+CONFIG_ND_CLAIM=y
+CONFIG_ND_BTT=m
+CONFIG_BTT=y
+CONFIG_DAX_DRIVER=y
+CONFIG_DAX=y
+CONFIG_DEV_DAX=m
+CONFIG_NVMEM=y
+CONFIG_RAVE_SP_EEPROM=m
+
+#
+# HW tracing support
+#
+CONFIG_STM=m
+# CONFIG_STM_DUMMY is not set
+CONFIG_STM_SOURCE_CONSOLE=m
+CONFIG_STM_SOURCE_HEARTBEAT=m
+# CONFIG_STM_SOURCE_FTRACE is not set
+CONFIG_INTEL_TH=m
+CONFIG_INTEL_TH_PCI=m
+CONFIG_INTEL_TH_ACPI=m
+CONFIG_INTEL_TH_GTH=m
+CONFIG_INTEL_TH_STH=m
+CONFIG_INTEL_TH_MSU=m
+CONFIG_INTEL_TH_PTI=m
+# CONFIG_INTEL_TH_DEBUG is not set
+CONFIG_FPGA=m
+CONFIG_ALTERA_PR_IP_CORE=m
+CONFIG_FPGA_MGR_ALTERA_PS_SPI=m
+CONFIG_FPGA_MGR_ALTERA_CVP=m
+CONFIG_FPGA_MGR_XILINX_SPI=m
+CONFIG_FPGA_MGR_MACHXO2_SPI=m
+CONFIG_FPGA_BRIDGE=m
+CONFIG_XILINX_PR_DECOUPLER=m
+CONFIG_FPGA_REGION=m
+# CONFIG_FPGA_DFL is not set
+CONFIG_PM_OPP=y
+# CONFIG_UNISYS_VISORBUS is not set
+CONFIG_SIOX=m
+CONFIG_SIOX_BUS_GPIO=m
+CONFIG_SLIMBUS=m
+CONFIG_SLIM_QCOM_CTRL=m
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_FS_IOMAP=y
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_EXT4_ENCRYPTION=y
+CONFIG_EXT4_FS_ENCRYPTION=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+CONFIG_JFS_STATISTICS=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+CONFIG_XFS_ONLINE_SCRUB=y
+# CONFIG_XFS_ONLINE_REPAIR is not set
+# CONFIG_XFS_WARN is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+CONFIG_OCFS2_DEBUG_FS=y
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
+# CONFIG_BTRFS_DEBUG is not set
+# CONFIG_BTRFS_ASSERT is not set
+# CONFIG_BTRFS_FS_REF_VERIFY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_F2FS_FS=m
+CONFIG_F2FS_STAT_FS=y
+CONFIG_F2FS_FS_XATTR=y
+CONFIG_F2FS_FS_POSIX_ACL=y
+CONFIG_F2FS_FS_SECURITY=y
+CONFIG_F2FS_CHECK_FS=y
+CONFIG_F2FS_FS_ENCRYPTION=y
+# CONFIG_F2FS_IO_TRACE is not set
+# CONFIG_F2FS_FAULT_INJECTION is not set
+CONFIG_FS_DAX=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_EXPORTFS_BLOCK_OPS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_MANDATORY_FILE_LOCKING=y
+CONFIG_FS_ENCRYPTION=m
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_QUOTACTL_COMPAT=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_AUTOFS_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_OVERLAY_FS=m
+# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
+CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
+CONFIG_OVERLAY_FS_INDEX=y
+CONFIG_OVERLAY_FS_NFS_EXPORT=y
+# CONFIG_OVERLAY_FS_XINO_AUTO is not set
+# CONFIG_OVERLAY_FS_METACOPY is not set
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+CONFIG_FSCACHE_STATS=y
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+# CONFIG_FAT_DEFAULT_UTF8 is not set
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_PROC_CHILDREN is not set
+CONFIG_KERNFS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_EFIVAR_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ORANGEFS_FS=m
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_ECRYPT_FS_MESSAGING=y
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UBIFS_ATIME_SUPPORT=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ENCRYPTION=y
+CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_CRAMFS=m
+CONFIG_CRAMFS_BLOCKDEV=y
+CONFIG_CRAMFS_MTD=y
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_FILE_CACHE is not set
+CONFIG_SQUASHFS_FILE_DIRECT=y
+# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
+# CONFIG_SQUASHFS_DECOMP_MULTI is not set
+CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZ4=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_SQUASHFS_ZSTD=y
+CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+CONFIG_ROMFS_FS=m
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+CONFIG_ROMFS_BACKED_BY_BOTH=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_ROMFS_ON_MTD=y
+CONFIG_PSTORE=y
+CONFIG_PSTORE_DEFLATE_COMPRESS=y
+CONFIG_PSTORE_LZO_COMPRESS=y
+CONFIG_PSTORE_LZ4_COMPRESS=y
+CONFIG_PSTORE_LZ4HC_COMPRESS=y
+CONFIG_PSTORE_842_COMPRESS=y
+CONFIG_PSTORE_ZSTD_COMPRESS=y
+CONFIG_PSTORE_COMPRESS=y
+# CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT is not set
+# CONFIG_PSTORE_LZO_COMPRESS_DEFAULT is not set
+CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT=y
+# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set
+# CONFIG_PSTORE_842_COMPRESS_DEFAULT is not set
+# CONFIG_PSTORE_ZSTD_COMPRESS_DEFAULT is not set
+CONFIG_PSTORE_COMPRESS_DEFAULT="lz4"
+# CONFIG_PSTORE_CONSOLE is not set
+CONFIG_PSTORE_PMSG=y
+# CONFIG_PSTORE_FTRACE is not set
+CONFIG_PSTORE_RAM=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V2=m
+CONFIG_NFS_V3=m
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_PNFS_FILE_LAYOUT=m
+CONFIG_PNFS_BLOCK=m
+CONFIG_PNFS_FLEXFILE_LAYOUT=m
+CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
+CONFIG_NFS_V4_1_MIGRATION=y
+CONFIG_NFS_V4_SECURITY_LABEL=y
+CONFIG_NFS_FSCACHE=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_PNFS=y
+CONFIG_NFSD_BLOCKLAYOUT=y
+CONFIG_NFSD_SCSILAYOUT=y
+CONFIG_NFSD_FLEXFILELAYOUT=y
+# CONFIG_NFSD_V4_SECURITY_LABEL is not set
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_GRACE_PERIOD=m
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BACKCHANNEL=y
+CONFIG_SUNRPC_SWAP=y
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_CEPH_FS=m
+CONFIG_CEPH_FSCACHE=y
+CONFIG_CEPH_FS_POSIX_ACL=y
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_CIFS_ACL=y
+# CONFIG_CIFS_DEBUG is not set
+CONFIG_CIFS_DFS_UPCALL=y
+# CONFIG_CIFS_SMB_DIRECT is not set
+CONFIG_CIFS_FSCACHE=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+CONFIG_AFS_FSCACHE=y
+CONFIG_9P_FS=m
+CONFIG_9P_FSCACHE=y
+CONFIG_9P_FS_POSIX_ACL=y
+CONFIG_9P_FS_SECURITY=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_MAC_ROMAN=m
+CONFIG_NLS_MAC_CELTIC=m
+CONFIG_NLS_MAC_CENTEURO=m
+CONFIG_NLS_MAC_CROATIAN=m
+CONFIG_NLS_MAC_CYRILLIC=m
+CONFIG_NLS_MAC_GAELIC=m
+CONFIG_NLS_MAC_GREEK=m
+CONFIG_NLS_MAC_ICELAND=m
+CONFIG_NLS_MAC_INUIT=m
+CONFIG_NLS_MAC_ROMANIAN=m
+CONFIG_NLS_MAC_TURKISH=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_COMPAT=y
+CONFIG_PERSISTENT_KEYRINGS=y
+# CONFIG_BIG_KEYS is not set
+CONFIG_TRUSTED_KEYS=m
+CONFIG_ENCRYPTED_KEYS=m
+# CONFIG_KEY_DH_OPERATIONS is not set
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SECURITY_PERF_EVENTS_RESTRICT=y
+CONFIG_SECURITY_TIOCSTI_RESTRICT=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_PAGE_TABLE_ISOLATION=y
+# CONFIG_SECURITY_INFINIBAND is not set
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_PATH=y
+CONFIG_INTEL_TXT=y
+CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
+CONFIG_HARDENED_USERCOPY=y
+CONFIG_HARDENED_USERCOPY_FALLBACK=y
+CONFIG_FORTIFY_SOURCE=y
+CONFIG_PAGE_SANITIZE=y
+CONFIG_PAGE_SANITIZE_VERIFY=y
+# CONFIG_STATIC_USERMODEHELPER is not set
+# CONFIG_SECURITY_SELINUX is not set
+# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_SECURITY_APPARMOR=y
+CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_APPARMOR_HASH=y
+CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
+# CONFIG_SECURITY_APPARMOR_DEBUG is not set
+# CONFIG_SECURITY_LOADPIN is not set
+CONFIG_SECURITY_YAMA=y
+# CONFIG_INTEGRITY is not set
+CONFIG_DEFAULT_SECURITY_APPARMOR=y
+# CONFIG_DEFAULT_SECURITY_DAC is not set
+CONFIG_DEFAULT_SECURITY="apparmor"
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=m
+CONFIG_CRYPTO_AKCIPHER2=y
+CONFIG_CRYPTO_AKCIPHER=y
+CONFIG_CRYPTO_KPP2=y
+CONFIG_CRYPTO_KPP=m
+CONFIG_CRYPTO_ACOMP2=y
+CONFIG_CRYPTO_RSA=y
+CONFIG_CRYPTO_DH=m
+CONFIG_CRYPTO_ECDH=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_PCRYPT=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_MCRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_SIMD=m
+CONFIG_CRYPTO_GLUE_HELPER_X86=m
+CONFIG_CRYPTO_ENGINE=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CHACHA20POLY1305=m
+CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_AEGIS128L=m
+CONFIG_CRYPTO_AEGIS256=m
+CONFIG_CRYPTO_AEGIS128_AESNI_SSE2=m
+CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2=m
+CONFIG_CRYPTO_AEGIS256_AESNI_SSE2=m
+CONFIG_CRYPTO_MORUS640=m
+CONFIG_CRYPTO_MORUS640_GLUE=m
+CONFIG_CRYPTO_MORUS640_SSE2=m
+CONFIG_CRYPTO_MORUS1280=m
+CONFIG_CRYPTO_MORUS1280_GLUE=m
+CONFIG_CRYPTO_MORUS1280_SSE2=m
+CONFIG_CRYPTO_MORUS1280_AVX2=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_ECHAINIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CFB=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_KEYWRAP=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_CMAC=m
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_CRC32=m
+CONFIG_CRYPTO_CRC32_PCLMUL=m
+CONFIG_CRYPTO_CRCT10DIF=y
+CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_POLY1305=m
+CONFIG_CRYPTO_POLY1305_X86_64=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_SSSE3=m
+CONFIG_CRYPTO_SHA256_SSSE3=m
+CONFIG_CRYPTO_SHA512_SSSE3=m
+CONFIG_CRYPTO_SHA1_MB=m
+CONFIG_CRYPTO_SHA256_MB=m
+CONFIG_CRYPTO_SHA512_MB=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_SHA3=m
+CONFIG_CRYPTO_SM3=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_TI=m
+CONFIG_CRYPTO_AES_X86_64=m
+CONFIG_CRYPTO_AES_NI_INTEL=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_BLOWFISH_COMMON=m
+CONFIG_CRYPTO_BLOWFISH_X86_64=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAMELLIA_X86_64=m
+CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
+CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
+CONFIG_CRYPTO_CAST_COMMON=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST5_AVX_X86_64=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_CAST6_AVX_X86_64=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES3_EDE_X86_64=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_CHACHA20=m
+CONFIG_CRYPTO_CHACHA20_X86_64=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
+CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
+CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
+CONFIG_CRYPTO_SM4=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_TWOFISH_X86_64=m
+CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
+CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_842=y
+CONFIG_CRYPTO_LZ4=y
+CONFIG_CRYPTO_LZ4HC=y
+CONFIG_CRYPTO_ZSTD=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_DRBG_MENU=m
+CONFIG_CRYPTO_DRBG_HMAC=y
+CONFIG_CRYPTO_DRBG_HASH=y
+CONFIG_CRYPTO_DRBG_CTR=y
+CONFIG_CRYPTO_DRBG=m
+CONFIG_CRYPTO_JITTERENTROPY=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_USER_API_RNG=m
+CONFIG_CRYPTO_USER_API_AEAD=m
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_CCP=y
+CONFIG_CRYPTO_DEV_CCP_DD=m
+CONFIG_CRYPTO_DEV_SP_CCP=y
+CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
+CONFIG_CRYPTO_DEV_SP_PSP=y
+CONFIG_CRYPTO_DEV_QAT=m
+CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
+CONFIG_CRYPTO_DEV_QAT_C3XXX=m
+CONFIG_CRYPTO_DEV_QAT_C62X=m
+CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
+CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
+CONFIG_CRYPTO_DEV_QAT_C62XVF=m
+CONFIG_CRYPTO_DEV_NITROX=m
+CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
+CONFIG_CRYPTO_DEV_CHELSIO=m
+CONFIG_CHELSIO_IPSEC_INLINE=y
+CONFIG_CRYPTO_DEV_CHELSIO_TLS=m
+CONFIG_CRYPTO_DEV_VIRTIO=m
+CONFIG_ASYMMETRIC_KEY_TYPE=y
+CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
+CONFIG_X509_CERTIFICATE_PARSER=y
+CONFIG_PKCS7_MESSAGE_PARSER=y
+CONFIG_PKCS7_TEST_KEY=m
+CONFIG_SIGNED_PE_FILE_VERIFICATION=y
+
+#
+# Certificates for signature checking
+#
+CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
+CONFIG_SYSTEM_TRUSTED_KEYRING=y
+CONFIG_SYSTEM_TRUSTED_KEYS=""
+# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
+CONFIG_SECONDARY_TRUSTED_KEYRING=y
+CONFIG_SYSTEM_BLACKLIST_KEYRING=y
+CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=m
+CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC64=m
+CONFIG_CRC4=m
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_CRC8=m
+CONFIG_XXHASH=y
+# CONFIG_RANDOM32_SELFTEST is not set
+CONFIG_842_COMPRESS=y
+CONFIG_842_DECOMPRESS=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_LZ4_COMPRESS=y
+CONFIG_LZ4HC_COMPRESS=y
+CONFIG_LZ4_DECOMPRESS=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_DECOMPRESS_LZ4=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_ENC8=y
+CONFIG_REED_SOLOMON_DEC8=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_BCH=m
+CONFIG_BCH_CONST_PARAMS=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_INTERVAL_TREE=y
+CONFIG_RADIX_TREE_MULTIORDER=y
+CONFIG_ASSOCIATIVE_ARRAY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAS_DMA=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_DMA_DIRECT_OPS=y
+CONFIG_DMA_VIRT_OPS=y
+CONFIG_SWIOTLB=y
+CONFIG_SGL_ALLOC=y
+CONFIG_IOMMU_HELPER=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPUMASK_OFFSTACK=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_GLOB=y
+# CONFIG_GLOB_SELFTEST is not set
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_CLZ_TAB=y
+CONFIG_CORDIC=m
+CONFIG_DDR=y
+CONFIG_IRQ_POLL=y
+CONFIG_MPILIB=y
+CONFIG_OID_REGISTRY=y
+CONFIG_UCS2_STRING=y
+CONFIG_FONT_SUPPORT=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_6x10 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+CONFIG_SG_POOL=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_PMEM_API=y
+CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
+CONFIG_ARCH_HAS_UACCESS_MCSAFE=y
+CONFIG_SBITMAP=y
+CONFIG_PARMAN=m
+CONFIG_PRIME_NUMBERS=m
+# CONFIG_STRING_SELFTEST is not set
+
+#
+# Kernel hacking
+#
+
+#
+# printk and dmesg options
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=1
+CONFIG_CONSOLE_LOGLEVEL_QUIET=4
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=1
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+
+#
+# Compile-time checks and compiler options
+#
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=0
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_READABLE_ASM is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_PAGE_OWNER is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_SECTION_MISMATCH_WARN_ONLY=y
+CONFIG_STACK_VALIDATION=y
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
+CONFIG_MAGIC_SYSRQ_SERIAL=y
+CONFIG_DEBUG_KERNEL=y
+
+#
+# Memory Debugging
+#
+# CONFIG_PAGE_EXTENSION is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DEBUG_PAGE_REF is not set
+# CONFIG_DEBUG_RODATA_TEST is not set
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_SLUB_STATS is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
+# CONFIG_DEBUG_VIRTUAL is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+CONFIG_HAVE_ARCH_KASAN=y
+# CONFIG_KASAN is not set
+CONFIG_ARCH_HAS_KCOV=y
+CONFIG_CC_HAS_SANCOV_TRACE_PC=y
+# CONFIG_KCOV is not set
+# CONFIG_DEBUG_SHIRQ is not set
+
+#
+# Debug Lockups and Hangs
+#
+# CONFIG_SOFTLOCKUP_DETECTOR is not set
+CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_WQ_WATCHDOG is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHED_INFO=y
+CONFIG_SCHEDSTATS=y
+CONFIG_SCHED_STACK_END_CHECK=y
+# CONFIG_DEBUG_TIMEKEEPING is not set
+# CONFIG_DEBUG_PREEMPT is not set
+
+#
+# Lock Debugging (spinlocks, mutexes, etc...)
+#
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_LOCK_TORTURE_TEST is not set
+# CONFIG_WW_MUTEX_SELFTEST is not set
+CONFIG_STACKTRACE=y
+# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_PI_LIST=y
+CONFIG_DEBUG_SG=y
+CONFIG_DEBUG_NOTIFIERS=y
+CONFIG_DEBUG_CREDENTIALS=y
+
+#
+# RCU Debugging
+#
+CONFIG_TORTURE_TEST=m
+CONFIG_RCU_PERF_TEST=m
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RCU_EQS_DEBUG is not set
+# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
+# CONFIG_NOTIFIER_ERROR_INJECTION is not set
+CONFIG_FUNCTION_ERROR_INJECTION=y
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_FENTRY=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACE_CLOCK=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+# CONFIG_FUNCTION_GRAPH_TRACER is not set
+# CONFIG_PREEMPTIRQ_EVENTS is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_HWLAT_TRACER is not set
+CONFIG_FTRACE_SYSCALLS=y
+# CONFIG_TRACER_SNAPSHOT is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+CONFIG_STACK_TRACER=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_KPROBE_EVENTS=y
+# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
+# CONFIG_UPROBE_EVENTS is not set
+CONFIG_BPF_EVENTS=y
+CONFIG_PROBE_EVENTS=y
+CONFIG_DYNAMIC_FTRACE=y
+CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_FUNCTION_PROFILER=y
+# CONFIG_BPF_KPROBE_OVERRIDE is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+# CONFIG_HIST_TRIGGERS is not set
+# CONFIG_TRACEPOINT_BENCHMARK is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_RING_BUFFER_STARTUP_TEST is not set
+# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
+# CONFIG_TRACE_EVAL_MAP_FILE is not set
+CONFIG_TRACING_EVENTS_GPIO=y
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_DMA_API_DEBUG is not set
+CONFIG_RUNTIME_TESTING_MENU=y
+CONFIG_LKDTM=m
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_TEST_SORT is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_RBTREE_TEST is not set
+# CONFIG_INTERVAL_TREE_TEST is not set
+# CONFIG_PERCPU_TEST is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_ASYNC_RAID6_TEST is not set
+# CONFIG_TEST_HEXDUMP is not set
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_TEST_PRINTF is not set
+# CONFIG_TEST_BITMAP is not set
+# CONFIG_TEST_BITFIELD is not set
+# CONFIG_TEST_UUID is not set
+# CONFIG_TEST_OVERFLOW is not set
+# CONFIG_TEST_RHASHTABLE is not set
+# CONFIG_TEST_HASH is not set
+# CONFIG_TEST_IDA is not set
+# CONFIG_TEST_PARMAN is not set
+# CONFIG_TEST_LKM is not set
+# CONFIG_TEST_USER_COPY is not set
+# CONFIG_TEST_BPF is not set
+# CONFIG_FIND_BIT_BENCHMARK is not set
+# CONFIG_TEST_FIRMWARE is not set
+# CONFIG_TEST_SYSCTL is not set
+# CONFIG_TEST_UDELAY is not set
+# CONFIG_TEST_STATIC_KEYS is not set
+# CONFIG_TEST_KMOD is not set
+CONFIG_MEMTEST=y
+# CONFIG_BUG_ON_DATA_CORRUPTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
+# CONFIG_UBSAN is not set
+CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_IO_STRICT_DEVMEM=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_EARLY_PRINTK_USB=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_EARLY_PRINTK_DBGP=y
+CONFIG_EARLY_PRINTK_EFI=y
+CONFIG_EARLY_PRINTK_USB_XDBC=y
+CONFIG_X86_PTDUMP_CORE=y
+# CONFIG_X86_PTDUMP is not set
+# CONFIG_EFI_PGT_DUMP is not set
+CONFIG_DEBUG_WX=y
+CONFIG_DOUBLEFAULT=y
+# CONFIG_DEBUG_TLBFLUSH is not set
+# CONFIG_IOMMU_DEBUG is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+# CONFIG_X86_DECODER_SELFTEST is not set
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+# CONFIG_CPA_DEBUG is not set
+# CONFIG_OPTIMIZE_INLINING is not set
+# CONFIG_DEBUG_ENTRY is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+CONFIG_X86_DEBUG_FPU=y
+# CONFIG_PUNIT_ATOM_DEBUG is not set
+CONFIG_UNWINDER_ORC=y
+# CONFIG_UNWINDER_FRAME_POINTER is not set
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-ata-fix-NCQ-LOG-strings-and-move-to-debug.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-ata-fix-NCQ-LOG-strings-and-move-to-debug.patch
new file mode 100644
index 00000000..344a8c4b
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-ata-fix-NCQ-LOG-strings-and-move-to-debug.patch
@@ -0,0 +1,23 @@
+diff -Naur linux-4.16.5/drivers/ata/libata-core.c linux-4.16.5-p/drivers/ata/libata-core.c
+--- linux-4.16.5/drivers/ata/libata-core.c 2018-04-26 11:00:39.000000000 +0200
++++ linux-4.16.5-p/drivers/ata/libata-core.c 2018-04-28 02:19:06.632381413 +0200
+@@ -2201,7 +2201,7 @@
+ unsigned int err_mask;
+
+ if (!ata_log_supported(dev, ATA_LOG_NCQ_SEND_RECV)) {
+- ata_dev_warn(dev, "NCQ Send/Recv Log not supported\n");
++ ata_dev_dbg(dev, "NCQ Send/Recv Log not supported\n");
+ return;
+ }
+ err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_SEND_RECV,
+@@ -2230,8 +2230,8 @@
+ unsigned int err_mask;
+
+ if (!ata_log_supported(dev, ATA_LOG_NCQ_NON_DATA)) {
+- ata_dev_warn(dev,
+- "NCQ Send/Recv Log not supported\n");
++ ata_dev_dbg(dev,
++ "NCQ Non-Data Log not supported\n");
+ return;
+ }
+ err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_NON_DATA,
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-drop_ancient-and-wrong-msg.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-drop_ancient-and-wrong-msg.patch
new file mode 100644
index 00000000..f184b08e
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-drop_ancient-and-wrong-msg.patch
@@ -0,0 +1,29 @@
+diff -Naur linux-4.15.1/drivers/edac/amd64_edac.c linux-4.15.1-p/drivers/edac/amd64_edac.c
+--- linux-4.15.1/drivers/edac/amd64_edac.c 2018-02-03 17:58:44.000000000 +0100
++++ linux-4.15.1-p/drivers/edac/amd64_edac.c 2018-02-12 01:52:10.411149240 +0100
+@@ -3020,17 +3020,6 @@
+ amd64_warn("Error restoring NB MCGCTL settings!\n");
+ }
+
+-/*
+- * EDAC requires that the BIOS have ECC enabled before
+- * taking over the processing of ECC errors. A command line
+- * option allows to force-enable hardware ECC later in
+- * enable_ecc_error_reporting().
+- */
+-static const char *ecc_msg =
+- "ECC disabled in the BIOS or no ECC capability, module will not load.\n"
+- " Either enable ECC checking or force module loading by setting "
+- "'ecc_enable_override'.\n"
+- " (Note that use of the override may cause unknown side effects.)\n";
+
+ static bool ecc_enabled(struct pci_dev *F3, u16 nid)
+ {
+@@ -3083,7 +3072,6 @@
+ nid, (ecc_en ? "enabled" : "disabled"));
+
+ if (!ecc_en || !nb_mce_en) {
+- amd64_info("%s", ecc_msg);
+ return false;
+ }
+ return true;
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-enable_alx_wol.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-enable_alx_wol.patch
new file mode 100644
index 00000000..1b7f6e13
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-enable_alx_wol.patch
@@ -0,0 +1,485 @@
+diff --git a/drivers/net/ethernet/atheros/alx/ethtool.c b/drivers/net/ethernet/atheros/alx/ethtool.c
+index 2f4eabf652e8..859e27236ce4 100644
+--- a/drivers/net/ethernet/atheros/alx/ethtool.c
++++ b/drivers/net/ethernet/atheros/alx/ethtool.c
+@@ -310,11 +310,47 @@ static int alx_get_sset_count(struct net_device *netdev, int sset)
+ }
+ }
+
++static void alx_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
++{
++ struct alx_priv *alx = netdev_priv(netdev);
++ struct alx_hw *hw = &alx->hw;
++
++ wol->supported = WAKE_MAGIC | WAKE_PHY;
++ wol->wolopts = 0;
++
++ if (hw->sleep_ctrl & ALX_SLEEP_WOL_MAGIC)
++ wol->wolopts |= WAKE_MAGIC;
++ if (hw->sleep_ctrl & ALX_SLEEP_WOL_PHY)
++ wol->wolopts |= WAKE_PHY;
++}
++
++static int alx_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
++{
++ struct alx_priv *alx = netdev_priv(netdev);
++ struct alx_hw *hw = &alx->hw;
++
++ if (wol->wolopts & ~(WAKE_MAGIC | WAKE_PHY))
++ return -EOPNOTSUPP;
++
++ hw->sleep_ctrl = 0;
++
++ if (wol->wolopts & WAKE_MAGIC)
++ hw->sleep_ctrl |= ALX_SLEEP_WOL_MAGIC;
++ if (wol->wolopts & WAKE_PHY)
++ hw->sleep_ctrl |= ALX_SLEEP_WOL_PHY;
++
++ device_set_wakeup_enable(&alx->hw.pdev->dev, hw->sleep_ctrl);
++
++ return 0;
++}
++
+ const struct ethtool_ops alx_ethtool_ops = {
+ .get_pauseparam = alx_get_pauseparam,
+ .set_pauseparam = alx_set_pauseparam,
+ .get_msglevel = alx_get_msglevel,
+ .set_msglevel = alx_set_msglevel,
++ .get_wol = alx_get_wol,
++ .set_wol = alx_set_wol,
+ .get_link = ethtool_op_get_link,
+ .get_strings = alx_get_strings,
+ .get_sset_count = alx_get_sset_count,
+diff --git a/drivers/net/ethernet/atheros/alx/hw.c b/drivers/net/ethernet/atheros/alx/hw.c
+index 6ac40b0003a3..4791b9dbbe26 100644
+--- a/drivers/net/ethernet/atheros/alx/hw.c
++++ b/drivers/net/ethernet/atheros/alx/hw.c
+@@ -332,6 +332,16 @@ void alx_set_macaddr(struct alx_hw *hw, const u8 *addr)
+ alx_write_mem32(hw, ALX_STAD1, val);
+ }
+
++static void alx_enable_osc(struct alx_hw *hw)
++{
++ u32 val;
++
++ /* rising edge */
++ val = alx_read_mem32(hw, ALX_MISC);
++ alx_write_mem32(hw, ALX_MISC, val & ~ALX_MISC_INTNLOSC_OPEN);
++ alx_write_mem32(hw, ALX_MISC, val | ALX_MISC_INTNLOSC_OPEN);
++}
++
+ static void alx_reset_osc(struct alx_hw *hw, u8 rev)
+ {
+ u32 val, val2;
+@@ -848,6 +858,66 @@ void alx_post_phy_link(struct alx_hw *hw)
+ }
+ }
+
++
++/* NOTE:
++ * 1. phy link must be established before calling this function
++ * 2. wol option (pattern,magic,link,etc.) is configed before call it.
++ */
++int alx_pre_suspend(struct alx_hw *hw, int speed, u8 duplex)
++{
++ u32 master, mac, phy, val;
++ int err = 0;
++
++ master = alx_read_mem32(hw, ALX_MASTER);
++ master &= ~ALX_MASTER_PCLKSEL_SRDS;
++ mac = hw->rx_ctrl;
++ /* 10/100 half */
++ ALX_SET_FIELD(mac, ALX_MAC_CTRL_SPEED, ALX_MAC_CTRL_SPEED_10_100);
++ mac &= ~(ALX_MAC_CTRL_FULLD | ALX_MAC_CTRL_RX_EN | ALX_MAC_CTRL_TX_EN);
++
++ phy = alx_read_mem32(hw, ALX_PHY_CTRL);
++ phy &= ~(ALX_PHY_CTRL_DSPRST_OUT | ALX_PHY_CTRL_CLS);
++ phy |= ALX_PHY_CTRL_RST_ANALOG | ALX_PHY_CTRL_HIB_PULSE |
++ ALX_PHY_CTRL_HIB_EN;
++
++ /* without any activity */
++ if (!(hw->sleep_ctrl & ALX_SLEEP_ACTIVE)) {
++ err = alx_write_phy_reg(hw, ALX_MII_IER, 0);
++ if (err)
++ return err;
++ phy |= ALX_PHY_CTRL_IDDQ | ALX_PHY_CTRL_POWER_DOWN;
++ } else {
++ if (hw->sleep_ctrl & (ALX_SLEEP_WOL_MAGIC | ALX_SLEEP_CIFS))
++ mac |= ALX_MAC_CTRL_RX_EN | ALX_MAC_CTRL_BRD_EN;
++ if (hw->sleep_ctrl & ALX_SLEEP_CIFS)
++ mac |= ALX_MAC_CTRL_TX_EN;
++ if (duplex == DUPLEX_FULL)
++ mac |= ALX_MAC_CTRL_FULLD;
++ if (speed == SPEED_1000)
++ ALX_SET_FIELD(mac, ALX_MAC_CTRL_SPEED,
++ ALX_MAC_CTRL_SPEED_1000);
++ phy |= ALX_PHY_CTRL_DSPRST_OUT;
++ err = alx_write_phy_ext(hw, ALX_MIIEXT_ANEG,
++ ALX_MIIEXT_S3DIG10,
++ ALX_MIIEXT_S3DIG10_SL);
++ if (err)
++ return err;
++ }
++
++ alx_enable_osc(hw);
++ hw->rx_ctrl = mac;
++ alx_write_mem32(hw, ALX_MASTER, master);
++ alx_write_mem32(hw, ALX_MAC_CTRL, mac);
++ alx_write_mem32(hw, ALX_PHY_CTRL, phy);
++
++ /* set val of PDLL D3PLLOFF */
++ val = alx_read_mem32(hw, ALX_PDLL_TRNS1);
++ val |= ALX_PDLL_TRNS1_D3PLLOFF_EN;
++ alx_write_mem32(hw, ALX_PDLL_TRNS1, val);
++
++ return 0;
++}
++
+ bool alx_phy_configured(struct alx_hw *hw)
+ {
+ u32 cfg, hw_cfg;
+@@ -920,6 +990,26 @@ int alx_clear_phy_intr(struct alx_hw *hw)
+ return alx_read_phy_reg(hw, ALX_MII_ISR, &isr);
+ }
+
++int alx_config_wol(struct alx_hw *hw)
++{
++ u32 wol = 0;
++ int err = 0;
++
++ /* turn on magic packet event */
++ if (hw->sleep_ctrl & ALX_SLEEP_WOL_MAGIC)
++ wol |= ALX_WOL0_MAGIC_EN | ALX_WOL0_PME_MAGIC_EN;
++
++ /* turn on link up event */
++ if (hw->sleep_ctrl & ALX_SLEEP_WOL_PHY) {
++ wol |= ALX_WOL0_LINK_EN | ALX_WOL0_PME_LINK;
++ /* only link up can wake up */
++ err = alx_write_phy_reg(hw, ALX_MII_IER, ALX_IER_LINK_UP);
++ }
++ alx_write_mem32(hw, ALX_WOL0, wol);
++
++ return err;
++}
++
+ void alx_disable_rss(struct alx_hw *hw)
+ {
+ u32 ctrl = alx_read_mem32(hw, ALX_RXQ0);
+@@ -1045,6 +1135,71 @@ void alx_mask_msix(struct alx_hw *hw, int index, bool mask)
+ }
+
+
++int alx_select_powersaving_speed(struct alx_hw *hw, int *speed, u8 *duplex)
++{
++ int i, err;
++ u16 lpa;
++
++ err = alx_read_phy_link(hw);
++ if (err)
++ return err;
++
++ if (hw->link_speed == SPEED_UNKNOWN) {
++ *speed = SPEED_UNKNOWN;
++ *duplex = DUPLEX_UNKNOWN;
++ return 0;
++ }
++
++ err = alx_read_phy_reg(hw, MII_LPA, &lpa);
++ if (err)
++ return err;
++
++ if (!(lpa & LPA_LPACK)) {
++ *speed = hw->link_speed;
++ return 0;
++ }
++
++ if (lpa & LPA_10FULL) {
++ *speed = SPEED_10;
++ *duplex = DUPLEX_FULL;
++ } else if (lpa & LPA_10HALF) {
++ *speed = SPEED_10;
++ *duplex = DUPLEX_HALF;
++ } else if (lpa & LPA_100FULL) {
++ *speed = SPEED_100;
++ *duplex = DUPLEX_FULL;
++ } else {
++ *speed = SPEED_100;
++ *duplex = DUPLEX_HALF;
++ }
++
++ if (*speed == hw->link_speed && *duplex == hw->duplex)
++ return 0;
++ err = alx_write_phy_reg(hw, ALX_MII_IER, 0);
++ if (err)
++ return err;
++ err = alx_setup_speed_duplex(hw, alx_speed_to_ethadv(*speed, *duplex) |
++ ADVERTISED_Autoneg, ALX_FC_ANEG |
++ ALX_FC_RX | ALX_FC_TX);
++ if (err)
++ return err;
++
++ /* wait for linkup */
++ for (i = 0; i < ALX_MAX_SETUP_LNK_CYCLE; i++) {
++ msleep(100);
++
++ err = alx_read_phy_link(hw);
++ if (err < 0)
++ return err;
++ if (hw->link_speed != SPEED_UNKNOWN)
++ break;
++ }
++ if (i == ALX_MAX_SETUP_LNK_CYCLE)
++ return -ETIMEDOUT;
++
++ return 0;
++}
++
+ bool alx_get_phy_info(struct alx_hw *hw)
+ {
+ u16 devs1, devs2;
+diff --git a/drivers/net/ethernet/atheros/alx/hw.h b/drivers/net/ethernet/atheros/alx/hw.h
+index e42d7e0947eb..a7fb6c8d846a 100644
+--- a/drivers/net/ethernet/atheros/alx/hw.h
++++ b/drivers/net/ethernet/atheros/alx/hw.h
+@@ -487,6 +487,8 @@ struct alx_hw {
+ u8 flowctrl;
+ u32 adv_cfg;
+
++ u32 sleep_ctrl;
++
+ spinlock_t mdio_lock;
+ struct mdio_if_info mdio;
+ u16 phy_id[2];
+@@ -549,12 +551,14 @@ void alx_reset_pcie(struct alx_hw *hw);
+ void alx_enable_aspm(struct alx_hw *hw, bool l0s_en, bool l1_en);
+ int alx_setup_speed_duplex(struct alx_hw *hw, u32 ethadv, u8 flowctrl);
+ void alx_post_phy_link(struct alx_hw *hw);
++int alx_pre_suspend(struct alx_hw *hw, int speed, u8 duplex);
+ int alx_read_phy_reg(struct alx_hw *hw, u16 reg, u16 *phy_data);
+ int alx_write_phy_reg(struct alx_hw *hw, u16 reg, u16 phy_data);
+ int alx_read_phy_ext(struct alx_hw *hw, u8 dev, u16 reg, u16 *pdata);
+ int alx_write_phy_ext(struct alx_hw *hw, u8 dev, u16 reg, u16 data);
+ int alx_read_phy_link(struct alx_hw *hw);
+ int alx_clear_phy_intr(struct alx_hw *hw);
++int alx_config_wol(struct alx_hw *hw);
+ void alx_cfg_mac_flowcontrol(struct alx_hw *hw, u8 fc);
+ void alx_start_mac(struct alx_hw *hw);
+ int alx_reset_mac(struct alx_hw *hw);
+@@ -563,6 +567,7 @@ bool alx_phy_configured(struct alx_hw *hw);
+ void alx_configure_basic(struct alx_hw *hw);
+ void alx_mask_msix(struct alx_hw *hw, int index, bool mask);
+ void alx_disable_rss(struct alx_hw *hw);
++int alx_select_powersaving_speed(struct alx_hw *hw, int *speed, u8 *duplex);
+ bool alx_get_phy_info(struct alx_hw *hw);
+ void alx_update_hw_stats(struct alx_hw *hw);
+
+diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c
+index 5e5022fa1d04..7adaf10a1929 100644
+--- a/drivers/net/ethernet/atheros/alx/main.c
++++ b/drivers/net/ethernet/atheros/alx/main.c
+@@ -1070,6 +1070,7 @@ static int alx_init_sw(struct alx_priv *alx)
+ alx->dev->max_mtu = ALX_MAX_FRAME_LEN(ALX_MAX_FRAME_SIZE);
+ alx->tx_ringsz = 256;
+ alx->rx_ringsz = 512;
++ hw->sleep_ctrl = ALX_SLEEP_WOL_MAGIC | ALX_SLEEP_WOL_PHY;
+ hw->imt = 200;
+ alx->int_mask = ALX_ISR_MISC;
+ hw->dma_chnl = hw->max_dma_chnl;
+@@ -1345,6 +1346,65 @@ static int alx_stop(struct net_device *netdev)
+ __alx_stop(netdev_priv(netdev));
+ return 0;
+ }
++static int __alx_shutdown(struct pci_dev *pdev, bool *wol_en)
++{
++ struct alx_priv *alx = pci_get_drvdata(pdev);
++ struct net_device *netdev = alx->dev;
++ struct alx_hw *hw = &alx->hw;
++ int err, speed;
++ u8 duplex;
++
++ netif_device_detach(netdev);
++
++ if (netif_running(netdev))
++ __alx_stop(alx);
++
++#ifdef CONFIG_PM_SLEEP
++ err = pci_save_state(pdev);
++ if (err)
++ return err;
++#endif
++
++ err = alx_select_powersaving_speed(hw, &speed, &duplex);
++ if (err)
++ return err;
++ err = alx_clear_phy_intr(hw);
++ if (err)
++ return err;
++ err = alx_pre_suspend(hw, speed, duplex);
++ if (err)
++ return err;
++ err = alx_config_wol(hw);
++ if (err)
++ return err;
++
++ *wol_en = false;
++ if (hw->sleep_ctrl & ALX_SLEEP_ACTIVE) {
++ netif_info(alx, wol, netdev,
++ "wol: ctrl=%X, speed=%X\n",
++ hw->sleep_ctrl, speed);
++ device_set_wakeup_enable(&pdev->dev, true);
++ *wol_en = true;
++ }
++
++ pci_disable_device(pdev);
++
++ return 0;
++}
++
++static void alx_shutdown(struct pci_dev *pdev)
++{
++ int err;
++ bool wol_en;
++
++ err = __alx_shutdown(pdev, &wol_en);
++ if (!err) {
++ pci_wake_from_d3(pdev, wol_en);
++ pci_set_power_state(pdev, PCI_D3hot);
++ } else {
++ dev_err(&pdev->dev, "shutdown fail %d\n", err);
++ }
++}
+
+ static void alx_link_check(struct work_struct *work)
+ {
+@@ -1841,6 +1901,8 @@ static int alx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+ goto out_unmap;
+ }
+
++ device_set_wakeup_enable(&pdev->dev, hw->sleep_ctrl);
++
+ netdev_info(netdev,
+ "Qualcomm Atheros AR816x/AR817x Ethernet [%pM]\n",
+ netdev->dev_addr);
+@@ -1883,12 +1945,21 @@ static void alx_remove(struct pci_dev *pdev)
+ static int alx_suspend(struct device *dev)
+ {
+ struct pci_dev *pdev = to_pci_dev(dev);
+- struct alx_priv *alx = pci_get_drvdata(pdev);
++ int err;
++ bool wol_en;
+
+- if (!netif_running(alx->dev))
+- return 0;
+- netif_device_detach(alx->dev);
+- __alx_stop(alx);
++ err = __alx_shutdown(pdev, &wol_en);
++ if (err) {
++ dev_err(&pdev->dev, "shutdown fail in suspend %d\n", err);
++ return err;
++ }
++
++ if (wol_en) {
++ pci_prepare_to_sleep(pdev);
++ } else {
++ pci_wake_from_d3(pdev, false);
++ pci_set_power_state(pdev, PCI_D3hot);
++ }
+ return 0;
+ }
+
+@@ -1896,26 +1967,49 @@ static int alx_resume(struct device *dev)
+ {
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct alx_priv *alx = pci_get_drvdata(pdev);
+- struct alx_hw *hw = &alx->hw;
+- int err;
+-
+- alx_reset_phy(hw);
+-
+- if (!netif_running(alx->dev))
+- return 0;
+- netif_device_attach(alx->dev);
+-
+- rtnl_lock();
+- err = __alx_open(alx, true);
+- rtnl_unlock();
+-
++ struct net_device *netdev = alx->dev;
++ struct alx_hw *hw = &alx->hw;
++ int err;
++
++ pci_set_power_state(pdev, PCI_D0);
++ pci_restore_state(pdev);
++ pci_save_state(pdev);
++
++ pci_enable_wake(pdev, PCI_D3hot, 0);
++ pci_enable_wake(pdev, PCI_D3cold, 0);
++
++ hw->link_speed = SPEED_UNKNOWN;
++ alx->int_mask = ALX_ISR_MISC;
++
++ alx_reset_pcie(hw);
++ alx_reset_phy(hw);
++
++ err = alx_reset_mac(hw);
++ if (err) {
++ netif_err(alx, hw, alx->dev,
++ "resume:reset_mac fail %d\n", err);
++ return -EIO;
++ }
++
++ err = alx_setup_speed_duplex(hw, hw->adv_cfg, hw->flowctrl);
++ if (err) {
++ netif_err(alx, hw, alx->dev,
++ "resume:setup_speed_duplex fail %d\n", err);
++ return -EIO;
++ }
++
++ if (netif_running(netdev)) {
++ rtnl_lock();
++ err = __alx_open(alx, true);
++ rtnl_unlock();
++ if (err)
++ return err;
++ }
++
++ netif_device_attach(netdev);
+ return err;
+ }
+
+-static SIMPLE_DEV_PM_OPS(alx_pm_ops, alx_suspend, alx_resume);
+-#define ALX_PM_OPS (&alx_pm_ops)
+-#else
+-#define ALX_PM_OPS NULL
+ #endif
+
+
+@@ -1961,6 +2055,8 @@ static pci_ers_result_t alx_pci_error_slot_reset(struct pci_dev *pdev)
+ }
+
+ pci_set_master(pdev);
++ pci_enable_wake(pdev, PCI_D3hot, 0);
++ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ alx_reset_pcie(hw);
+ if (!alx_reset_mac(hw))
+@@ -2012,11 +2108,19 @@ static const struct pci_device_id alx_pci_tbl[] = {
+ {}
+ };
+
++#ifdef CONFIG_PM_SLEEP
++static SIMPLE_DEV_PM_OPS(alx_pm_ops, alx_suspend, alx_resume);
++#define ALX_PM_OPS (&alx_pm_ops)
++#else
++#define ALX_PM_OPS NULL
++#endif
++
+ static struct pci_driver alx_driver = {
+ .name = alx_drv_name,
+ .id_table = alx_pci_tbl,
+ .probe = alx_probe,
+ .remove = alx_remove,
++ .shutdown = alx_shutdown,
+ .err_handler = &alx_err_handlers,
+ .driver.pm = ALX_PM_OPS,
+ };
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-linux-hardened.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-linux-hardened.patch
new file mode 100644
index 00000000..3cba43ca
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-linux-hardened.patch
@@ -0,0 +1,2736 @@
+diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
+index a29301d6e6c6..d3a259e762fa 100644
+--- a/Documentation/admin-guide/kernel-parameters.txt
++++ b/Documentation/admin-guide/kernel-parameters.txt
+@@ -496,16 +496,6 @@
+ nosocket -- Disable socket memory accounting.
+ nokmem -- Disable kernel memory accounting.
+
+- checkreqprot [SELINUX] Set initial checkreqprot flag value.
+- Format: { "0" | "1" }
+- See security/selinux/Kconfig help text.
+- 0 -- check protection applied by kernel (includes
+- any implied execute protection).
+- 1 -- check protection requested by application.
+- Default value is set via a kernel config option.
+- Value can be changed at runtime via
+- /selinux/checkreqprot.
+-
+ cio_ignore= [S390]
+ See Documentation/s390/CommonIO for details.
+ clk_ignore_unused
+@@ -3165,6 +3155,11 @@
+ the specified number of seconds. This is to be used if
+ your oopses keep scrolling off the screen.
+
++ extra_latent_entropy
++ Enable a very simple form of latent entropy extraction
++ from the first 4GB of memory as the bootmem allocator
++ passes the memory pages to the buddy allocator.
++
+ pcbit= [HW,ISDN]
+
+ pcd. [PARIDE]
+diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
+index 37a679501ddc..59b747920f4d 100644
+--- a/Documentation/sysctl/kernel.txt
++++ b/Documentation/sysctl/kernel.txt
+@@ -94,6 +94,7 @@ show up in /proc/sys/kernel:
+ - sysctl_writes_strict
+ - tainted
+ - threads-max
++- tiocsti_restrict
+ - unknown_nmi_panic
+ - watchdog
+ - watchdog_thresh
+@@ -1041,6 +1042,26 @@ available RAM pages threads-max is reduced accordingly.
+
+ ==============================================================
+
++tiocsti_restrict:
++
++This toggle indicates whether unprivileged users are prevented
++from using the TIOCSTI ioctl to inject commands into other processes
++which share a tty session.
++
++When tiocsti_restrict is set to (0) there are no restrictions(accept
++the default restriction of only being able to injection commands into
++one's own tty). When tiocsti_restrict is set to (1), users must
++have CAP_SYS_ADMIN to use the TIOCSTI ioctl.
++
++When user namespaces are in use, the check for the capability
++CAP_SYS_ADMIN is done against the user namespace that originally
++opened the tty.
++
++The kernel config option CONFIG_SECURITY_TIOCSTI_RESTRICT sets the
++default value of tiocsti_restrict.
++
++==============================================================
++
+ unknown_nmi_panic:
+
+ The value in this file affects behavior of handling NMI. When the
+diff --git a/Makefile b/Makefile
+index f7e7e365e2ff..7c69091b65a0 100644
+--- a/Makefile
++++ b/Makefile
+@@ -693,6 +693,9 @@ stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG) := -fstack-protector-strong
+ KBUILD_CFLAGS += $(stackp-flags-y)
+
+ ifeq ($(cc-name),clang)
++ifdef CONFIG_LOCAL_INIT
++KBUILD_CFLAGS += -fsanitize=local-init
++endif
+ KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
+ KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
+ KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
+diff --git a/arch/Kconfig b/arch/Kconfig
+index a336548487e6..bbe821420e7a 100644
+--- a/arch/Kconfig
++++ b/arch/Kconfig
+@@ -599,7 +599,7 @@ config ARCH_MMAP_RND_BITS
+ int "Number of bits to use for ASLR of mmap base address" if EXPERT
+ range ARCH_MMAP_RND_BITS_MIN ARCH_MMAP_RND_BITS_MAX
+ default ARCH_MMAP_RND_BITS_DEFAULT if ARCH_MMAP_RND_BITS_DEFAULT
+- default ARCH_MMAP_RND_BITS_MIN
++ default ARCH_MMAP_RND_BITS_MAX
+ depends on HAVE_ARCH_MMAP_RND_BITS
+ help
+ This value can be used to select the number of bits to use to
+@@ -633,7 +633,7 @@ config ARCH_MMAP_RND_COMPAT_BITS
+ int "Number of bits to use for ASLR of mmap base address for compatible applications" if EXPERT
+ range ARCH_MMAP_RND_COMPAT_BITS_MIN ARCH_MMAP_RND_COMPAT_BITS_MAX
+ default ARCH_MMAP_RND_COMPAT_BITS_DEFAULT if ARCH_MMAP_RND_COMPAT_BITS_DEFAULT
+- default ARCH_MMAP_RND_COMPAT_BITS_MIN
++ default ARCH_MMAP_RND_COMPAT_BITS_MAX
+ depends on HAVE_ARCH_MMAP_RND_COMPAT_BITS
+ help
+ This value can be used to select the number of bits to use to
+@@ -838,6 +838,7 @@ config ARCH_HAS_REFCOUNT
+
+ config REFCOUNT_FULL
+ bool "Perform full reference count validation at the expense of speed"
++ default y
+ help
+ Enabling this switches the refcounting infrastructure from a fast
+ unchecked atomic_t implementation to a fully state checked
+diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
+index 8790a29d0af4..265c6edd859f 100644
+--- a/arch/arm64/Kconfig
++++ b/arch/arm64/Kconfig
+@@ -1031,6 +1031,7 @@ endif
+
+ config ARM64_SW_TTBR0_PAN
+ bool "Emulate Privileged Access Never using TTBR0_EL1 switching"
++ default y
+ help
+ Enabling this option prevents the kernel from accessing
+ user-space memory directly by pointing TTBR0_EL1 to a reserved
+@@ -1206,6 +1207,7 @@ config RANDOMIZE_BASE
+ bool "Randomize the address of the kernel image"
+ select ARM64_MODULE_PLTS if MODULES
+ select RELOCATABLE
++ default y
+ help
+ Randomizes the virtual address at which the kernel image is
+ loaded, as a security feature that deters exploit attempts
+diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug
+index 69c9170bdd24..a786227db0e3 100644
+--- a/arch/arm64/Kconfig.debug
++++ b/arch/arm64/Kconfig.debug
+@@ -42,6 +42,7 @@ config ARM64_RANDOMIZE_TEXT_OFFSET
+ config DEBUG_WX
+ bool "Warn on W+X mappings at boot"
+ select ARM64_PTDUMP_CORE
++ default y
+ ---help---
+ Generate a warning if any W+X mappings are found at boot.
+
+diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
+index db8d364f8476..67441db36c07 100644
+--- a/arch/arm64/configs/defconfig
++++ b/arch/arm64/configs/defconfig
+@@ -1,4 +1,3 @@
+-CONFIG_SYSVIPC=y
+ CONFIG_POSIX_MQUEUE=y
+ CONFIG_AUDIT=y
+ CONFIG_NO_HZ_IDLE=y
+diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
+index 433b9554c6a1..1f4b06317c9f 100644
+--- a/arch/arm64/include/asm/elf.h
++++ b/arch/arm64/include/asm/elf.h
+@@ -114,10 +114,10 @@
+
+ /*
+ * This is the base location for PIE (ET_DYN with INTERP) loads. On
+- * 64-bit, this is above 4GB to leave the entire 32-bit address
++ * 64-bit, this is raised to 4GB to leave the entire 32-bit address
+ * space open for things that want to use the area for 32-bit pointers.
+ */
+-#define ELF_ET_DYN_BASE (2 * TASK_SIZE_64 / 3)
++#define ELF_ET_DYN_BASE 0x100000000UL
+
+ #ifndef __ASSEMBLY__
+
+@@ -171,10 +171,10 @@ extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+ /* 1GB of VA */
+ #ifdef CONFIG_COMPAT
+ #define STACK_RND_MASK (test_thread_flag(TIF_32BIT) ? \
+- 0x7ff >> (PAGE_SHIFT - 12) : \
+- 0x3ffff >> (PAGE_SHIFT - 12))
++ ((1UL << mmap_rnd_compat_bits) - 1) >> (PAGE_SHIFT - 12) : \
++ ((1UL << mmap_rnd_bits) - 1) >> (PAGE_SHIFT - 12))
+ #else
+-#define STACK_RND_MASK (0x3ffff >> (PAGE_SHIFT - 12))
++#define STACK_RND_MASK (((1UL << mmap_rnd_bits) - 1) >> (PAGE_SHIFT - 12))
+ #endif
+
+ #ifdef __AARCH64EB__
+diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
+index 7f1628effe6d..38bd2f95a961 100644
+--- a/arch/arm64/kernel/process.c
++++ b/arch/arm64/kernel/process.c
+@@ -481,9 +481,9 @@ unsigned long arch_align_stack(unsigned long sp)
+ unsigned long arch_randomize_brk(struct mm_struct *mm)
+ {
+ if (is_compat_task())
+- return randomize_page(mm->brk, SZ_32M);
++ return mm->brk + get_random_long() % SZ_32M + PAGE_SIZE;
+ else
+- return randomize_page(mm->brk, SZ_1G);
++ return mm->brk + get_random_long() % SZ_1G + PAGE_SIZE;
+ }
+
+ /*
+diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
+index e76d16ac2776..07dcedbb271e 100644
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -1189,8 +1189,7 @@ config VM86
+ default X86_LEGACY_VM86
+
+ config X86_16BIT
+- bool "Enable support for 16-bit segments" if EXPERT
+- default y
++ bool "Enable support for 16-bit segments"
+ depends on MODIFY_LDT_SYSCALL
+ ---help---
+ This option is required by programs like Wine to run 16-bit
+@@ -2274,7 +2273,7 @@ config COMPAT_VDSO
+ choice
+ prompt "vsyscall table for legacy applications"
+ depends on X86_64
+- default LEGACY_VSYSCALL_EMULATE
++ default LEGACY_VSYSCALL_NONE
+ help
+ Legacy user code that does not know how to find the vDSO expects
+ to be able to issue three syscalls by calling fixed addresses in
+@@ -2355,8 +2354,7 @@ config CMDLINE_OVERRIDE
+ be set to 'N' under normal conditions.
+
+ config MODIFY_LDT_SYSCALL
+- bool "Enable the LDT (local descriptor table)" if EXPERT
+- default y
++ bool "Enable the LDT (local descriptor table)"
+ ---help---
+ Linux can allow user programs to install a per-process x86
+ Local Descriptor Table (LDT) using the modify_ldt(2) system
+diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
+index 7d68f0c7cfb1..85f04bbeadd8 100644
+--- a/arch/x86/Kconfig.debug
++++ b/arch/x86/Kconfig.debug
+@@ -101,6 +101,7 @@ config EFI_PGT_DUMP
+ config DEBUG_WX
+ bool "Warn on W+X mappings at boot"
+ select X86_PTDUMP_CORE
++ default y
+ ---help---
+ Generate a warning if any W+X mappings are found at boot.
+
+diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
+index e32fc1f274d8..d08acc76502a 100644
+--- a/arch/x86/configs/x86_64_defconfig
++++ b/arch/x86/configs/x86_64_defconfig
+@@ -1,5 +1,4 @@
+ # CONFIG_LOCALVERSION_AUTO is not set
+-CONFIG_SYSVIPC=y
+ CONFIG_POSIX_MQUEUE=y
+ CONFIG_BSD_PROCESS_ACCT=y
+ CONFIG_TASKSTATS=y
+diff --git a/arch/x86/entry/vdso/vma.c b/arch/x86/entry/vdso/vma.c
+index 5b8b556dbb12..a569f08b4478 100644
+--- a/arch/x86/entry/vdso/vma.c
++++ b/arch/x86/entry/vdso/vma.c
+@@ -204,55 +204,9 @@ static int map_vdso(const struct vdso_image *image, unsigned long addr)
+ }
+
+ #ifdef CONFIG_X86_64
+-/*
+- * Put the vdso above the (randomized) stack with another randomized
+- * offset. This way there is no hole in the middle of address space.
+- * To save memory make sure it is still in the same PTE as the stack
+- * top. This doesn't give that many random bits.
+- *
+- * Note that this algorithm is imperfect: the distribution of the vdso
+- * start address within a PMD is biased toward the end.
+- *
+- * Only used for the 64-bit and x32 vdsos.
+- */
+-static unsigned long vdso_addr(unsigned long start, unsigned len)
+-{
+- unsigned long addr, end;
+- unsigned offset;
+-
+- /*
+- * Round up the start address. It can start out unaligned as a result
+- * of stack start randomization.
+- */
+- start = PAGE_ALIGN(start);
+-
+- /* Round the lowest possible end address up to a PMD boundary. */
+- end = (start + len + PMD_SIZE - 1) & PMD_MASK;
+- if (end >= TASK_SIZE_MAX)
+- end = TASK_SIZE_MAX;
+- end -= len;
+-
+- if (end > start) {
+- offset = get_random_int() % (((end - start) >> PAGE_SHIFT) + 1);
+- addr = start + (offset << PAGE_SHIFT);
+- } else {
+- addr = start;
+- }
+-
+- /*
+- * Forcibly align the final address in case we have a hardware
+- * issue that requires alignment for performance reasons.
+- */
+- addr = align_vdso_addr(addr);
+-
+- return addr;
+-}
+-
+ static int map_vdso_randomized(const struct vdso_image *image)
+ {
+- unsigned long addr = vdso_addr(current->mm->start_stack, image->size-image->sym_vvar_start);
+-
+- return map_vdso(image, addr);
++ return map_vdso(image, 0);
+ }
+ #endif
+
+diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
+index 0d157d2a1e2a..770c8ae97f92 100644
+--- a/arch/x86/include/asm/elf.h
++++ b/arch/x86/include/asm/elf.h
+@@ -249,11 +249,11 @@ extern int force_personality32;
+
+ /*
+ * This is the base location for PIE (ET_DYN with INTERP) loads. On
+- * 64-bit, this is above 4GB to leave the entire 32-bit address
++ * 64-bit, this is raised to 4GB to leave the entire 32-bit address
+ * space open for things that want to use the area for 32-bit pointers.
+ */
+ #define ELF_ET_DYN_BASE (mmap_is_ia32() ? 0x000400000UL : \
+- (DEFAULT_MAP_WINDOW / 3 * 2))
++ 0x100000000UL)
+
+ /* This yields a mask that user programs can use to figure out what
+ instruction set this CPU supports. This could be done in user space,
+@@ -313,8 +313,8 @@ extern bool mmap_address_hint_valid(unsigned long addr, unsigned long len);
+
+ #ifdef CONFIG_X86_32
+
+-#define __STACK_RND_MASK(is32bit) (0x7ff)
+-#define STACK_RND_MASK (0x7ff)
++#define __STACK_RND_MASK(is32bit) ((1UL << mmap_rnd_bits) - 1)
++#define STACK_RND_MASK ((1UL << mmap_rnd_bits) - 1)
+
+ #define ARCH_DLINFO ARCH_DLINFO_IA32
+
+@@ -323,7 +323,11 @@ extern bool mmap_address_hint_valid(unsigned long addr, unsigned long len);
+ #else /* CONFIG_X86_32 */
+
+ /* 1GB for 64bit, 8MB for 32bit */
+-#define __STACK_RND_MASK(is32bit) ((is32bit) ? 0x7ff : 0x3fffff)
++#ifdef CONFIG_COMPAT
++#define __STACK_RND_MASK(is32bit) ((is32bit) ? (1UL << mmap_rnd_compat_bits) - 1 : (1UL << mmap_rnd_bits) - 1)
++#else
++#define __STACK_RND_MASK(is32bit) ((1UL << mmap_rnd_bits) - 1)
++#endif
+ #define STACK_RND_MASK __STACK_RND_MASK(mmap_is_ia32())
+
+ #define ARCH_DLINFO \
+@@ -381,5 +385,4 @@ struct va_alignment {
+ } ____cacheline_aligned;
+
+ extern struct va_alignment va_align;
+-extern unsigned long align_vdso_addr(unsigned long);
+ #endif /* _ASM_X86_ELF_H */
+diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
+index 79ec7add5f98..2950448e00ac 100644
+--- a/arch/x86/include/asm/tlbflush.h
++++ b/arch/x86/include/asm/tlbflush.h
+@@ -310,6 +310,7 @@ static inline void cr4_set_bits(unsigned long mask)
+
+ local_irq_save(flags);
+ cr4 = this_cpu_read(cpu_tlbstate.cr4);
++ BUG_ON(cr4 != __read_cr4());
+ if ((cr4 | mask) != cr4)
+ __cr4_set(cr4 | mask);
+ local_irq_restore(flags);
+@@ -322,6 +323,7 @@ static inline void cr4_clear_bits(unsigned long mask)
+
+ local_irq_save(flags);
+ cr4 = this_cpu_read(cpu_tlbstate.cr4);
++ BUG_ON(cr4 != __read_cr4());
+ if ((cr4 & ~mask) != cr4)
+ __cr4_set(cr4 & ~mask);
+ local_irq_restore(flags);
+@@ -332,6 +334,7 @@ static inline void cr4_toggle_bits_irqsoff(unsigned long mask)
+ unsigned long cr4;
+
+ cr4 = this_cpu_read(cpu_tlbstate.cr4);
++ BUG_ON(cr4 != __read_cr4());
+ __cr4_set(cr4 ^ mask);
+ }
+
+@@ -438,6 +441,7 @@ static inline void __native_flush_tlb_global(void)
+ raw_local_irq_save(flags);
+
+ cr4 = this_cpu_read(cpu_tlbstate.cr4);
++ BUG_ON(cr4 != __read_cr4());
+ /* toggle PGE */
+ native_write_cr4(cr4 ^ X86_CR4_PGE);
+ /* write old PGE again and flush TLBs */
+diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
+index 1073118b9bf0..2e34aede5c36 100644
+--- a/arch/x86/kernel/cpu/common.c
++++ b/arch/x86/kernel/cpu/common.c
+@@ -1748,7 +1748,6 @@ void cpu_init(void)
+ wrmsrl(MSR_KERNEL_GS_BASE, 0);
+ barrier();
+
+- x86_configure_nx();
+ x2apic_setup();
+
+ /*
+diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
+index b8b08e61ac73..42f763e0adf3 100644
+--- a/arch/x86/kernel/process.c
++++ b/arch/x86/kernel/process.c
+@@ -39,6 +39,8 @@
+ #include <asm/desc.h>
+ #include <asm/prctl.h>
+ #include <asm/spec-ctrl.h>
++#include <asm/elf.h>
++#include <linux/sizes.h>
+
+ #include "process.h"
+
+@@ -783,7 +785,10 @@ unsigned long arch_align_stack(unsigned long sp)
+
+ unsigned long arch_randomize_brk(struct mm_struct *mm)
+ {
+- return randomize_page(mm->brk, 0x02000000);
++ if (mmap_is_ia32())
++ return mm->brk + get_random_long() % SZ_32M + PAGE_SIZE;
++ else
++ return mm->brk + get_random_long() % SZ_1G + PAGE_SIZE;
+ }
+
+ /*
+diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
+index 6a78d4b36a79..715009f7a96c 100644
+--- a/arch/x86/kernel/sys_x86_64.c
++++ b/arch/x86/kernel/sys_x86_64.c
+@@ -54,13 +54,6 @@ static unsigned long get_align_bits(void)
+ return va_align.bits & get_align_mask();
+ }
+
+-unsigned long align_vdso_addr(unsigned long addr)
+-{
+- unsigned long align_mask = get_align_mask();
+- addr = (addr + align_mask) & ~align_mask;
+- return addr | get_align_bits();
+-}
+-
+ static int __init control_va_addr_alignment(char *str)
+ {
+ /* guard against enabling this on other CPU families */
+@@ -122,10 +115,7 @@ static void find_start_end(unsigned long addr, unsigned long flags,
+ }
+
+ *begin = get_mmap_base(1);
+- if (in_compat_syscall())
+- *end = task_size_32bit();
+- else
+- *end = task_size_64bit(addr > DEFAULT_MAP_WINDOW);
++ *end = get_mmap_base(0);
+ }
+
+ unsigned long
+@@ -210,7 +200,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
+
+ info.flags = VM_UNMAPPED_AREA_TOPDOWN;
+ info.length = len;
+- info.low_limit = PAGE_SIZE;
++ info.low_limit = get_mmap_base(1);
+ info.high_limit = get_mmap_base(0);
+
+ /*
+diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
+index 979e0a02cbe1..d6ab882a0091 100644
+--- a/arch/x86/mm/init_32.c
++++ b/arch/x86/mm/init_32.c
+@@ -560,9 +560,9 @@ static void __init pagetable_init(void)
+
+ #define DEFAULT_PTE_MASK ~(_PAGE_NX | _PAGE_GLOBAL)
+ /* Bits supported by the hardware: */
+-pteval_t __supported_pte_mask __read_mostly = DEFAULT_PTE_MASK;
++pteval_t __supported_pte_mask __ro_after_init = DEFAULT_PTE_MASK;
+ /* Bits allowed in normal kernel mappings: */
+-pteval_t __default_kernel_pte_mask __read_mostly = DEFAULT_PTE_MASK;
++pteval_t __default_kernel_pte_mask __ro_after_init = DEFAULT_PTE_MASK;
+ EXPORT_SYMBOL_GPL(__supported_pte_mask);
+ /* Used in PAGE_KERNEL_* macros which are reasonably used out-of-tree: */
+ EXPORT_SYMBOL(__default_kernel_pte_mask);
+@@ -873,7 +873,7 @@ int arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
+ #endif
+ #endif
+
+-int kernel_set_to_readonly __read_mostly;
++int kernel_set_to_readonly __ro_after_init;
+
+ void set_kernel_text_rw(void)
+ {
+@@ -925,12 +925,11 @@ void mark_rodata_ro(void)
+ unsigned long start = PFN_ALIGN(_text);
+ unsigned long size = PFN_ALIGN(_etext) - start;
+
++ kernel_set_to_readonly = 1;
+ set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
+ printk(KERN_INFO "Write protecting the kernel text: %luk\n",
+ size >> 10);
+
+- kernel_set_to_readonly = 1;
+-
+ #ifdef CONFIG_CPA_DEBUG
+ printk(KERN_INFO "Testing CPA: Reverting %lx-%lx\n",
+ start, start+size);
+diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
+index a3e9c6ee3cf2..40bbcd978b0a 100644
+--- a/arch/x86/mm/init_64.c
++++ b/arch/x86/mm/init_64.c
+@@ -66,9 +66,9 @@
+ */
+
+ /* Bits supported by the hardware: */
+-pteval_t __supported_pte_mask __read_mostly = ~0;
++pteval_t __supported_pte_mask __ro_after_init = ~0;
+ /* Bits allowed in normal kernel mappings: */
+-pteval_t __default_kernel_pte_mask __read_mostly = ~0;
++pteval_t __default_kernel_pte_mask __ro_after_init = ~0;
+ EXPORT_SYMBOL_GPL(__supported_pte_mask);
+ /* Used in PAGE_KERNEL_* macros which are reasonably used out-of-tree: */
+ EXPORT_SYMBOL(__default_kernel_pte_mask);
+@@ -1201,7 +1201,7 @@ void __init mem_init(void)
+ mem_init_print_info(NULL);
+ }
+
+-int kernel_set_to_readonly;
++int kernel_set_to_readonly __ro_after_init;
+
+ void set_kernel_text_rw(void)
+ {
+@@ -1250,9 +1250,8 @@ void mark_rodata_ro(void)
+
+ printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
+ (end - start) >> 10);
+- set_memory_ro(start, (end - start) >> PAGE_SHIFT);
+-
+ kernel_set_to_readonly = 1;
++ set_memory_ro(start, (end - start) >> PAGE_SHIFT);
+
+ /*
+ * The rodata/data/bss/brk section (but not the kernel text!)
+diff --git a/block/blk-softirq.c b/block/blk-softirq.c
+index 15c1f5e12eb8..ff72cccec5b8 100644
+--- a/block/blk-softirq.c
++++ b/block/blk-softirq.c
+@@ -20,7 +20,7 @@ static DEFINE_PER_CPU(struct list_head, blk_cpu_done);
+ * Softirq action handler - move entries to local list and loop over them
+ * while passing them to the queue registered handler.
+ */
+-static __latent_entropy void blk_done_softirq(struct softirq_action *h)
++static __latent_entropy void blk_done_softirq(void)
+ {
+ struct list_head *cpu_list, local_list;
+
+diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
+index adf28788cab5..cd4b3501eda9 100644
+--- a/drivers/ata/libata-core.c
++++ b/drivers/ata/libata-core.c
+@@ -5158,7 +5158,7 @@ void ata_qc_free(struct ata_queued_cmd *qc)
+ struct ata_port *ap;
+ unsigned int tag;
+
+- WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
++ BUG_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
+ ap = qc->ap;
+
+ qc->flags = 0;
+@@ -5175,7 +5175,7 @@ void __ata_qc_complete(struct ata_queued_cmd *qc)
+ struct ata_port *ap;
+ struct ata_link *link;
+
+- WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
++ BUG_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
+ WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE));
+ ap = qc->ap;
+ link = qc->dev->link;
+diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
+index 1df9cb8e659e..eb71148a4a69 100644
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -9,7 +9,6 @@ source "drivers/tty/Kconfig"
+
+ config DEVMEM
+ bool "/dev/mem virtual device support"
+- default y
+ help
+ Say Y here if you want to support the /dev/mem device.
+ The /dev/mem device is used to access areas of physical
+@@ -531,7 +530,6 @@ config TELCLOCK
+ config DEVPORT
+ bool "/dev/port character device"
+ depends on ISA || PCI
+- default y
+ help
+ Say Y here if you want to support the /dev/port device. The /dev/port
+ device is similar to /dev/mem, but for I/O ports.
+diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
+index e0a04bfc873e..ec93f827c599 100644
+--- a/drivers/tty/Kconfig
++++ b/drivers/tty/Kconfig
+@@ -122,7 +122,6 @@ config UNIX98_PTYS
+
+ config LEGACY_PTYS
+ bool "Legacy (BSD) PTY support"
+- default y
+ ---help---
+ A pseudo terminal (PTY) is a software device consisting of two
+ halves: a master and a slave. The slave device behaves identical to
+diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
+index ac8025cd4a1f..a89e48f53fba 100644
+--- a/drivers/tty/tty_io.c
++++ b/drivers/tty/tty_io.c
+@@ -172,6 +172,7 @@ static void free_tty_struct(struct tty_struct *tty)
+ put_device(tty->dev);
+ kfree(tty->write_buf);
+ tty->magic = 0xDEADDEAD;
++ put_user_ns(tty->owner_user_ns);
+ kfree(tty);
+ }
+
+@@ -2177,11 +2178,19 @@ static int tty_fasync(int fd, struct file *filp, int on)
+ * FIXME: may race normal receive processing
+ */
+
++int tiocsti_restrict = IS_ENABLED(CONFIG_SECURITY_TIOCSTI_RESTRICT);
++
+ static int tiocsti(struct tty_struct *tty, char __user *p)
+ {
+ char ch, mbz = 0;
+ struct tty_ldisc *ld;
+
++ if (tiocsti_restrict &&
++ !ns_capable(tty->owner_user_ns, CAP_SYS_ADMIN)) {
++ dev_warn_ratelimited(tty->dev,
++ "Denied TIOCSTI ioctl for non-privileged process\n");
++ return -EPERM;
++ }
+ if ((current->signal->tty != tty) && !capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (get_user(ch, p))
+@@ -2865,6 +2874,7 @@ struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx)
+ tty->index = idx;
+ tty_line_name(driver, idx, tty->name);
+ tty->dev = tty_get_device(tty);
++ tty->owner_user_ns = get_user_ns(current_user_ns());
+
+ return tty;
+ }
+diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
+index eb24ec0e160d..68c93697cae9 100644
+--- a/drivers/usb/core/hub.c
++++ b/drivers/usb/core/hub.c
+@@ -41,6 +41,8 @@
+ #define USB_TP_TRANSMISSION_DELAY 40 /* ns */
+ #define USB_TP_TRANSMISSION_DELAY_MAX 65535 /* ns */
+
++extern int deny_new_usb;
++
+ /* Protect struct usb_device->state and ->children members
+ * Note: Both are also protected by ->dev.sem, except that ->state can
+ * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
+@@ -4940,6 +4942,12 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
+ goto done;
+ return;
+ }
++
++ if (deny_new_usb) {
++ dev_err(&port_dev->dev, "denied insert of USB device on port %d\n", port1);
++ goto done;
++ }
++
+ if (hub_is_superspeed(hub->hdev))
+ unit_load = 150;
+ else
+diff --git a/fs/exec.c b/fs/exec.c
+index 433b1257694a..f86201f25a4c 100644
+--- a/fs/exec.c
++++ b/fs/exec.c
+@@ -62,6 +62,7 @@
+ #include <linux/oom.h>
+ #include <linux/compat.h>
+ #include <linux/vmalloc.h>
++#include <linux/random.h>
+
+ #include <linux/uaccess.h>
+ #include <asm/mmu_context.h>
+@@ -320,6 +321,8 @@ static int __bprm_mm_init(struct linux_binprm *bprm)
+ arch_bprm_mm_init(mm, vma);
+ up_write(&mm->mmap_sem);
+ bprm->p = vma->vm_end - sizeof(void *);
++ if (randomize_va_space)
++ bprm->p ^= get_random_int() & ~PAGE_MASK;
+ return 0;
+ err:
+ up_write(&mm->mmap_sem);
+diff --git a/fs/namei.c b/fs/namei.c
+index 914178cdbe94..7422b5ce077a 100644
+--- a/fs/namei.c
++++ b/fs/namei.c
+@@ -885,10 +885,10 @@ static inline void put_link(struct nameidata *nd)
+ path_put(&last->link);
+ }
+
+-int sysctl_protected_symlinks __read_mostly = 0;
+-int sysctl_protected_hardlinks __read_mostly = 0;
+-int sysctl_protected_fifos __read_mostly;
+-int sysctl_protected_regular __read_mostly;
++int sysctl_protected_symlinks __read_mostly = 1;
++int sysctl_protected_hardlinks __read_mostly = 1;
++int sysctl_protected_fifos __read_mostly = 2;
++int sysctl_protected_regular __read_mostly = 2;
+
+ /**
+ * may_follow_link - Check symlink following for unsafe situations
+diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig
+index 5f93cfacb3d1..cea0d7d3b23e 100644
+--- a/fs/nfs/Kconfig
++++ b/fs/nfs/Kconfig
+@@ -195,4 +195,3 @@ config NFS_DEBUG
+ bool
+ depends on NFS_FS && SUNRPC_DEBUG
+ select CRC32
+- default y
+diff --git a/fs/proc/Kconfig b/fs/proc/Kconfig
+index 817c02b13b1d..b8cd62b5cbc3 100644
+--- a/fs/proc/Kconfig
++++ b/fs/proc/Kconfig
+@@ -40,7 +40,6 @@ config PROC_KCORE
+ config PROC_VMCORE
+ bool "/proc/vmcore support"
+ depends on PROC_FS && CRASH_DUMP
+- default y
+ help
+ Exports the dump image of crashed kernel in ELF format.
+
+diff --git a/fs/stat.c b/fs/stat.c
+index f8e6fb2c3657..240c1432e18f 100644
+--- a/fs/stat.c
++++ b/fs/stat.c
+@@ -40,8 +40,13 @@ void generic_fillattr(struct inode *inode, struct kstat *stat)
+ stat->gid = inode->i_gid;
+ stat->rdev = inode->i_rdev;
+ stat->size = i_size_read(inode);
+- stat->atime = inode->i_atime;
+- stat->mtime = inode->i_mtime;
++ if (is_sidechannel_device(inode) && !capable_noaudit(CAP_MKNOD)) {
++ stat->atime = inode->i_ctime;
++ stat->mtime = inode->i_ctime;
++ } else {
++ stat->atime = inode->i_atime;
++ stat->mtime = inode->i_mtime;
++ }
+ stat->ctime = inode->i_ctime;
+ stat->blksize = i_blocksize(inode);
+ stat->blocks = inode->i_blocks;
+@@ -75,9 +80,14 @@ int vfs_getattr_nosec(const struct path *path, struct kstat *stat,
+ stat->result_mask |= STATX_BASIC_STATS;
+ request_mask &= STATX_ALL;
+ query_flags &= KSTAT_QUERY_FLAGS;
+- if (inode->i_op->getattr)
+- return inode->i_op->getattr(path, stat, request_mask,
+- query_flags);
++ if (inode->i_op->getattr) {
++ int retval = inode->i_op->getattr(path, stat, request_mask, query_flags);
++ if (!retval && is_sidechannel_device(inode) && !capable_noaudit(CAP_MKNOD)) {
++ stat->atime = stat->ctime;
++ stat->mtime = stat->ctime;
++ }
++ return retval;
++ }
+
+ generic_fillattr(inode, stat);
+ return 0;
+diff --git a/include/linux/cache.h b/include/linux/cache.h
+index 750621e41d1c..e7157c18c62c 100644
+--- a/include/linux/cache.h
++++ b/include/linux/cache.h
+@@ -31,6 +31,8 @@
+ #define __ro_after_init __attribute__((__section__(".data..ro_after_init")))
+ #endif
+
++#define __read_only __ro_after_init
++
+ #ifndef ____cacheline_aligned
+ #define ____cacheline_aligned __attribute__((__aligned__(SMP_CACHE_BYTES)))
+ #endif
+diff --git a/include/linux/capability.h b/include/linux/capability.h
+index f640dcbc880c..2b4f5d651f19 100644
+--- a/include/linux/capability.h
++++ b/include/linux/capability.h
+@@ -207,6 +207,7 @@ extern bool has_capability_noaudit(struct task_struct *t, int cap);
+ extern bool has_ns_capability_noaudit(struct task_struct *t,
+ struct user_namespace *ns, int cap);
+ extern bool capable(int cap);
++extern bool capable_noaudit(int cap);
+ extern bool ns_capable(struct user_namespace *ns, int cap);
+ extern bool ns_capable_noaudit(struct user_namespace *ns, int cap);
+ #else
+@@ -232,6 +233,10 @@ static inline bool capable(int cap)
+ {
+ return true;
+ }
++static inline bool capable_noaudit(int cap)
++{
++ return true;
++}
+ static inline bool ns_capable(struct user_namespace *ns, int cap)
+ {
+ return true;
+diff --git a/include/linux/fs.h b/include/linux/fs.h
+index d4e1b43a53c3..c925cbdd1d95 100644
+--- a/include/linux/fs.h
++++ b/include/linux/fs.h
+@@ -3466,4 +3466,15 @@ extern void inode_nohighmem(struct inode *inode);
+ extern int vfs_fadvise(struct file *file, loff_t offset, loff_t len,
+ int advice);
+
++extern int device_sidechannel_restrict;
++
++static inline bool is_sidechannel_device(const struct inode *inode)
++{
++ umode_t mode;
++ if (!device_sidechannel_restrict)
++ return false;
++ mode = inode->i_mode;
++ return ((S_ISCHR(mode) || S_ISBLK(mode)) && (mode & (S_IROTH | S_IWOTH)));
++}
++
+ #endif /* _LINUX_FS_H */
+diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
+index fd1ce10553bf..1905d2476d32 100644
+--- a/include/linux/fsnotify.h
++++ b/include/linux/fsnotify.h
+@@ -177,6 +177,9 @@ static inline void fsnotify_access(struct file *file)
+ struct inode *inode = file_inode(file);
+ __u32 mask = FS_ACCESS;
+
++ if (is_sidechannel_device(inode))
++ return;
++
+ if (S_ISDIR(inode->i_mode))
+ mask |= FS_ISDIR;
+
+@@ -195,6 +198,9 @@ static inline void fsnotify_modify(struct file *file)
+ struct inode *inode = file_inode(file);
+ __u32 mask = FS_MODIFY;
+
++ if (is_sidechannel_device(inode))
++ return;
++
+ if (S_ISDIR(inode->i_mode))
+ mask |= FS_ISDIR;
+
+diff --git a/include/linux/gfp.h b/include/linux/gfp.h
+index 24bcc5eec6b4..b1cdfc350596 100644
+--- a/include/linux/gfp.h
++++ b/include/linux/gfp.h
+@@ -530,9 +530,9 @@ extern struct page *alloc_pages_vma(gfp_t gfp_mask, int order,
+ extern unsigned long __get_free_pages(gfp_t gfp_mask, unsigned int order);
+ extern unsigned long get_zeroed_page(gfp_t gfp_mask);
+
+-void *alloc_pages_exact(size_t size, gfp_t gfp_mask);
++void *alloc_pages_exact(size_t size, gfp_t gfp_mask) __attribute__((alloc_size(1)));
+ void free_pages_exact(void *virt, size_t size);
+-void * __meminit alloc_pages_exact_nid(int nid, size_t size, gfp_t gfp_mask);
++void * __meminit alloc_pages_exact_nid(int nid, size_t size, gfp_t gfp_mask) __attribute__((alloc_size(2)));
+
+ #define __get_free_page(gfp_mask) \
+ __get_free_pages((gfp_mask), 0)
+diff --git a/include/linux/highmem.h b/include/linux/highmem.h
+index 0690679832d4..b9394bc86fad 100644
+--- a/include/linux/highmem.h
++++ b/include/linux/highmem.h
+@@ -191,6 +191,13 @@ static inline void clear_highpage(struct page *page)
+ kunmap_atomic(kaddr);
+ }
+
++static inline void verify_zero_highpage(struct page *page)
++{
++ void *kaddr = kmap_atomic(page);
++ BUG_ON(memchr_inv(kaddr, 0, PAGE_SIZE));
++ kunmap_atomic(kaddr);
++}
++
+ static inline void zero_user_segments(struct page *page,
+ unsigned start1, unsigned end1,
+ unsigned start2, unsigned end2)
+diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
+index eeceac3376fc..78ad558bce5f 100644
+--- a/include/linux/interrupt.h
++++ b/include/linux/interrupt.h
+@@ -490,7 +490,7 @@ extern const char * const softirq_to_name[NR_SOFTIRQS];
+
+ struct softirq_action
+ {
+- void (*action)(struct softirq_action *);
++ void (*action)(void);
+ };
+
+ asmlinkage void do_softirq(void);
+@@ -505,7 +505,7 @@ static inline void do_softirq_own_stack(void)
+ }
+ #endif
+
+-extern void open_softirq(int nr, void (*action)(struct softirq_action *));
++extern void __init open_softirq(int nr, void (*action)(void));
+ extern void softirq_init(void);
+ extern void __raise_softirq_irqoff(unsigned int nr);
+
+diff --git a/include/linux/kobject_ns.h b/include/linux/kobject_ns.h
+index 069aa2ebef90..cb9e3637a620 100644
+--- a/include/linux/kobject_ns.h
++++ b/include/linux/kobject_ns.h
+@@ -45,7 +45,7 @@ struct kobj_ns_type_operations {
+ void (*drop_ns)(void *);
+ };
+
+-int kobj_ns_type_register(const struct kobj_ns_type_operations *ops);
++int __init kobj_ns_type_register(const struct kobj_ns_type_operations *ops);
+ int kobj_ns_type_registered(enum kobj_ns_type type);
+ const struct kobj_ns_type_operations *kobj_child_ns_ops(struct kobject *parent);
+ const struct kobj_ns_type_operations *kobj_ns_ops(struct kobject *kobj);
+diff --git a/include/linux/mm.h b/include/linux/mm.h
+index bdec425c8e14..58409dee149a 100644
+--- a/include/linux/mm.h
++++ b/include/linux/mm.h
+@@ -571,7 +571,7 @@ static inline int is_vmalloc_or_module_addr(const void *x)
+ }
+ #endif
+
+-extern void *kvmalloc_node(size_t size, gfp_t flags, int node);
++extern void *kvmalloc_node(size_t size, gfp_t flags, int node) __attribute__((alloc_size(1)));
+ static inline void *kvmalloc(size_t size, gfp_t flags)
+ {
+ return kvmalloc_node(size, flags, NUMA_NO_NODE);
+diff --git a/include/linux/percpu.h b/include/linux/percpu.h
+index 70b7123f38c7..09f3019489b2 100644
+--- a/include/linux/percpu.h
++++ b/include/linux/percpu.h
+@@ -129,7 +129,7 @@ extern int __init pcpu_page_first_chunk(size_t reserved_size,
+ pcpu_fc_populate_pte_fn_t populate_pte_fn);
+ #endif
+
+-extern void __percpu *__alloc_reserved_percpu(size_t size, size_t align);
++extern void __percpu *__alloc_reserved_percpu(size_t size, size_t align) __attribute__((alloc_size(1)));
+ extern bool __is_kernel_percpu_address(unsigned long addr, unsigned long *can_addr);
+ extern bool is_kernel_percpu_address(unsigned long addr);
+
+@@ -137,8 +137,8 @@ extern bool is_kernel_percpu_address(unsigned long addr);
+ extern void __init setup_per_cpu_areas(void);
+ #endif
+
+-extern void __percpu *__alloc_percpu_gfp(size_t size, size_t align, gfp_t gfp);
+-extern void __percpu *__alloc_percpu(size_t size, size_t align);
++extern void __percpu *__alloc_percpu_gfp(size_t size, size_t align, gfp_t gfp) __attribute__((alloc_size(1)));
++extern void __percpu *__alloc_percpu(size_t size, size_t align) __attribute__((alloc_size(1)));
+ extern void free_percpu(void __percpu *__pdata);
+ extern phys_addr_t per_cpu_ptr_to_phys(void *addr);
+
+diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
+index 42fc852bf512..a6c5cacee3b5 100644
+--- a/include/linux/perf_event.h
++++ b/include/linux/perf_event.h
+@@ -1184,6 +1184,11 @@ extern int perf_cpu_time_max_percent_handler(struct ctl_table *table, int write,
+ int perf_event_max_stack_handler(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp, loff_t *ppos);
+
++static inline bool perf_paranoid_any(void)
++{
++ return sysctl_perf_event_paranoid > 2;
++}
++
+ static inline bool perf_paranoid_tracepoint_raw(void)
+ {
+ return sysctl_perf_event_paranoid > -1;
+diff --git a/include/linux/slab.h b/include/linux/slab.h
+index d6393413ef09..f11e06e87a29 100644
+--- a/include/linux/slab.h
++++ b/include/linux/slab.h
+@@ -180,8 +180,8 @@ void memcg_destroy_kmem_caches(struct mem_cgroup *);
+ /*
+ * Common kmalloc functions provided by all allocators
+ */
+-void * __must_check __krealloc(const void *, size_t, gfp_t);
+-void * __must_check krealloc(const void *, size_t, gfp_t);
++void * __must_check __krealloc(const void *, size_t, gfp_t) __attribute__((alloc_size(2)));
++void * __must_check krealloc(const void *, size_t, gfp_t) __attribute((alloc_size(2)));
+ void kfree(const void *);
+ void kzfree(const void *);
+ size_t ksize(const void *);
+@@ -354,7 +354,7 @@ static __always_inline unsigned int kmalloc_index(size_t size)
+ }
+ #endif /* !CONFIG_SLOB */
+
+-void *__kmalloc(size_t size, gfp_t flags) __assume_kmalloc_alignment __malloc;
++void *__kmalloc(size_t size, gfp_t flags) __assume_kmalloc_alignment __malloc __attribute__((alloc_size(1)));
+ void *kmem_cache_alloc(struct kmem_cache *, gfp_t flags) __assume_slab_alignment __malloc;
+ void kmem_cache_free(struct kmem_cache *, void *);
+
+@@ -378,7 +378,7 @@ static __always_inline void kfree_bulk(size_t size, void **p)
+ }
+
+ #ifdef CONFIG_NUMA
+-void *__kmalloc_node(size_t size, gfp_t flags, int node) __assume_kmalloc_alignment __malloc;
++void *__kmalloc_node(size_t size, gfp_t flags, int node) __assume_kmalloc_alignment __malloc __attribute__((alloc_size(1)));
+ void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node) __assume_slab_alignment __malloc;
+ #else
+ static __always_inline void *__kmalloc_node(size_t size, gfp_t flags, int node)
+@@ -500,7 +500,7 @@ static __always_inline void *kmalloc_large(size_t size, gfp_t flags)
+ * for general use, and so are not documented here. For a full list of
+ * potential flags, always refer to linux/gfp.h.
+ */
+-static __always_inline void *kmalloc(size_t size, gfp_t flags)
++static __always_inline __attribute__((alloc_size(1))) void *kmalloc(size_t size, gfp_t flags)
+ {
+ if (__builtin_constant_p(size)) {
+ if (size > KMALLOC_MAX_CACHE_SIZE)
+@@ -540,7 +540,7 @@ static __always_inline unsigned int kmalloc_size(unsigned int n)
+ return 0;
+ }
+
+-static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node)
++static __always_inline __attribute__((alloc_size(1))) void *kmalloc_node(size_t size, gfp_t flags, int node)
+ {
+ #ifndef CONFIG_SLOB
+ if (__builtin_constant_p(size) &&
+diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
+index 3a1a1dbc6f49..ff38fec9eb76 100644
+--- a/include/linux/slub_def.h
++++ b/include/linux/slub_def.h
+@@ -121,6 +121,11 @@ struct kmem_cache {
+ unsigned long random;
+ #endif
+
++#ifdef CONFIG_SLAB_CANARY
++ unsigned long random_active;
++ unsigned long random_inactive;
++#endif
++
+ #ifdef CONFIG_NUMA
+ /*
+ * Defragmentation by allocating from a remote node.
+diff --git a/include/linux/string.h b/include/linux/string.h
+index f58e1ef76572..516caa40676e 100644
+--- a/include/linux/string.h
++++ b/include/linux/string.h
+@@ -238,10 +238,16 @@ void __read_overflow2(void) __compiletime_error("detected read beyond size of ob
+ void __read_overflow3(void) __compiletime_error("detected read beyond size of object passed as 3rd parameter");
+ void __write_overflow(void) __compiletime_error("detected write beyond size of object passed as 1st parameter");
+
++#ifdef CONFIG_FORTIFY_SOURCE_STRICT_STRING
++#define __string_size(p) __builtin_object_size(p, 1)
++#else
++#define __string_size(p) __builtin_object_size(p, 0)
++#endif
++
+ #if !defined(__NO_FORTIFY) && defined(__OPTIMIZE__) && defined(CONFIG_FORTIFY_SOURCE)
+ __FORTIFY_INLINE char *strncpy(char *p, const char *q, __kernel_size_t size)
+ {
+- size_t p_size = __builtin_object_size(p, 0);
++ size_t p_size = __string_size(p);
+ if (__builtin_constant_p(size) && p_size < size)
+ __write_overflow();
+ if (p_size < size)
+@@ -251,7 +257,7 @@ __FORTIFY_INLINE char *strncpy(char *p, const char *q, __kernel_size_t size)
+
+ __FORTIFY_INLINE char *strcat(char *p, const char *q)
+ {
+- size_t p_size = __builtin_object_size(p, 0);
++ size_t p_size = __string_size(p);
+ if (p_size == (size_t)-1)
+ return __builtin_strcat(p, q);
+ if (strlcat(p, q, p_size) >= p_size)
+@@ -262,7 +268,7 @@ __FORTIFY_INLINE char *strcat(char *p, const char *q)
+ __FORTIFY_INLINE __kernel_size_t strlen(const char *p)
+ {
+ __kernel_size_t ret;
+- size_t p_size = __builtin_object_size(p, 0);
++ size_t p_size = __string_size(p);
+
+ /* Work around gcc excess stack consumption issue */
+ if (p_size == (size_t)-1 ||
+@@ -277,7 +283,7 @@ __FORTIFY_INLINE __kernel_size_t strlen(const char *p)
+ extern __kernel_size_t __real_strnlen(const char *, __kernel_size_t) __RENAME(strnlen);
+ __FORTIFY_INLINE __kernel_size_t strnlen(const char *p, __kernel_size_t maxlen)
+ {
+- size_t p_size = __builtin_object_size(p, 0);
++ size_t p_size = __string_size(p);
+ __kernel_size_t ret = __real_strnlen(p, maxlen < p_size ? maxlen : p_size);
+ if (p_size <= ret && maxlen != ret)
+ fortify_panic(__func__);
+@@ -289,8 +295,8 @@ extern size_t __real_strlcpy(char *, const char *, size_t) __RENAME(strlcpy);
+ __FORTIFY_INLINE size_t strlcpy(char *p, const char *q, size_t size)
+ {
+ size_t ret;
+- size_t p_size = __builtin_object_size(p, 0);
+- size_t q_size = __builtin_object_size(q, 0);
++ size_t p_size = __string_size(p);
++ size_t q_size = __string_size(q);
+ if (p_size == (size_t)-1 && q_size == (size_t)-1)
+ return __real_strlcpy(p, q, size);
+ ret = strlen(q);
+@@ -310,8 +316,8 @@ __FORTIFY_INLINE size_t strlcpy(char *p, const char *q, size_t size)
+ __FORTIFY_INLINE char *strncat(char *p, const char *q, __kernel_size_t count)
+ {
+ size_t p_len, copy_len;
+- size_t p_size = __builtin_object_size(p, 0);
+- size_t q_size = __builtin_object_size(q, 0);
++ size_t p_size = __string_size(p);
++ size_t q_size = __string_size(q);
+ if (p_size == (size_t)-1 && q_size == (size_t)-1)
+ return __builtin_strncat(p, q, count);
+ p_len = strlen(p);
+@@ -424,8 +430,8 @@ __FORTIFY_INLINE void *kmemdup(const void *p, size_t size, gfp_t gfp)
+ /* defined after fortified strlen and memcpy to reuse them */
+ __FORTIFY_INLINE char *strcpy(char *p, const char *q)
+ {
+- size_t p_size = __builtin_object_size(p, 0);
+- size_t q_size = __builtin_object_size(q, 0);
++ size_t p_size = __string_size(p);
++ size_t q_size = __string_size(q);
+ if (p_size == (size_t)-1 && q_size == (size_t)-1)
+ return __builtin_strcpy(p, q);
+ memcpy(p, q, strlen(q) + 1);
+diff --git a/include/linux/tty.h b/include/linux/tty.h
+index 808fbfe86f85..e4429b7d6e8e 100644
+--- a/include/linux/tty.h
++++ b/include/linux/tty.h
+@@ -14,6 +14,7 @@
+ #include <uapi/linux/tty.h>
+ #include <linux/rwsem.h>
+ #include <linux/llist.h>
++#include <linux/user_namespace.h>
+
+
+ /*
+@@ -336,6 +337,7 @@ struct tty_struct {
+ /* If the tty has a pending do_SAK, queue it here - akpm */
+ struct work_struct SAK_work;
+ struct tty_port *port;
++ struct user_namespace *owner_user_ns;
+ } __randomize_layout;
+
+ /* Each of a tty's open files has private_data pointing to tty_file_private */
+@@ -345,6 +347,8 @@ struct tty_file_private {
+ struct list_head list;
+ };
+
++extern int tiocsti_restrict;
++
+ /* tty magic number */
+ #define TTY_MAGIC 0x5401
+
+diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
+index 398e9c95cd61..baab7195306a 100644
+--- a/include/linux/vmalloc.h
++++ b/include/linux/vmalloc.h
+@@ -69,19 +69,19 @@ static inline void vmalloc_init(void)
+ }
+ #endif
+
+-extern void *vmalloc(unsigned long size);
+-extern void *vzalloc(unsigned long size);
+-extern void *vmalloc_user(unsigned long size);
+-extern void *vmalloc_node(unsigned long size, int node);
+-extern void *vzalloc_node(unsigned long size, int node);
+-extern void *vmalloc_exec(unsigned long size);
+-extern void *vmalloc_32(unsigned long size);
+-extern void *vmalloc_32_user(unsigned long size);
+-extern void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot);
++extern void *vmalloc(unsigned long size) __attribute__((alloc_size(1)));
++extern void *vzalloc(unsigned long size) __attribute__((alloc_size(1)));
++extern void *vmalloc_user(unsigned long size) __attribute__((alloc_size(1)));
++extern void *vmalloc_node(unsigned long size, int node) __attribute__((alloc_size(1)));
++extern void *vzalloc_node(unsigned long size, int node) __attribute__((alloc_size(1)));
++extern void *vmalloc_exec(unsigned long size) __attribute__((alloc_size(1)));
++extern void *vmalloc_32(unsigned long size) __attribute__((alloc_size(1)));
++extern void *vmalloc_32_user(unsigned long size) __attribute__((alloc_size(1)));
++extern void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot) __attribute__((alloc_size(1)));
+ extern void *__vmalloc_node_range(unsigned long size, unsigned long align,
+ unsigned long start, unsigned long end, gfp_t gfp_mask,
+ pgprot_t prot, unsigned long vm_flags, int node,
+- const void *caller);
++ const void *caller) __attribute__((alloc_size(1)));
+ #ifndef CONFIG_MMU
+ extern void *__vmalloc_node_flags(unsigned long size, int node, gfp_t flags);
+ static inline void *__vmalloc_node_flags_caller(unsigned long size, int node,
+diff --git a/init/Kconfig b/init/Kconfig
+index 47035b5a46f6..63b30636fdc0 100644
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -326,6 +326,7 @@ config USELIB
+ config AUDIT
+ bool "Auditing support"
+ depends on NET
++ default y
+ help
+ Enable auditing infrastructure that can be used with another
+ kernel subsystem, such as SELinux (which requires this for
+@@ -1091,6 +1092,12 @@ config CC_OPTIMIZE_FOR_SIZE
+
+ endchoice
+
++config LOCAL_INIT
++ bool "Zero uninitialized locals"
++ help
++ Zero-fill uninitialized local variables, other than variable-length
++ arrays. Requires compiler support.
++
+ config HAVE_LD_DEAD_CODE_DATA_ELIMINATION
+ bool
+ help
+@@ -1377,8 +1384,7 @@ config SHMEM
+ which may be appropriate on small systems without swap.
+
+ config AIO
+- bool "Enable AIO support" if EXPERT
+- default y
++ bool "Enable AIO support"
+ help
+ This option enables POSIX asynchronous I/O which may by used
+ by some high performance threaded applications. Disabling
+@@ -1595,7 +1601,7 @@ config VM_EVENT_COUNTERS
+
+ config SLUB_DEBUG
+ default y
+- bool "Enable SLUB debugging support" if EXPERT
++ bool "Enable SLUB debugging support"
+ depends on SLUB && SYSFS
+ help
+ SLUB has extensive debug support features. Disabling these can
+@@ -1619,7 +1625,6 @@ config SLUB_MEMCG_SYSFS_ON
+
+ config COMPAT_BRK
+ bool "Disable heap randomization"
+- default y
+ help
+ Randomizing heap placement makes heap exploits harder, but it
+ also breaks ancient binaries (including anything libc5 based).
+@@ -1666,7 +1671,6 @@ endchoice
+
+ config SLAB_MERGE_DEFAULT
+ bool "Allow slab caches to be merged"
+- default y
+ help
+ For reduced kernel memory fragmentation, slab caches can be
+ merged when they share the same size and other characteristics.
+@@ -1679,9 +1683,9 @@ config SLAB_MERGE_DEFAULT
+ command line.
+
+ config SLAB_FREELIST_RANDOM
+- default n
+ depends on SLAB || SLUB
+ bool "SLAB freelist randomization"
++ default y
+ help
+ Randomizes the freelist order used on creating new pages. This
+ security feature reduces the predictability of the kernel slab
+@@ -1690,12 +1694,56 @@ config SLAB_FREELIST_RANDOM
+ config SLAB_FREELIST_HARDENED
+ bool "Harden slab freelist metadata"
+ depends on SLUB
++ default y
+ help
+ Many kernel heap attacks try to target slab cache metadata and
+ other infrastructure. This options makes minor performance
+ sacrifies to harden the kernel slab allocator against common
+ freelist exploit methods.
+
++config SLAB_HARDENED
++ default y
++ depends on SLUB
++ bool "Hardened SLAB infrastructure"
++ help
++ Make minor performance sacrifices to harden the kernel slab
++ allocator.
++
++config SLAB_CANARY
++ depends on SLUB
++ depends on !SLAB_MERGE_DEFAULT
++ bool "SLAB canaries"
++ default y
++ help
++ Place canaries at the end of kernel slab allocations, sacrificing
++ some performance and memory usage for security.
++
++ Canaries can detect some forms of heap corruption when allocations
++ are freed and as part of the HARDENED_USERCOPY feature. It provides
++ basic use-after-free detection for HARDENED_USERCOPY.
++
++ Canaries absorb small overflows (rendering them harmless), mitigate
++ non-NUL terminated C string overflows on 64-bit via a guaranteed zero
++ byte and provide basic double-free detection.
++
++config SLAB_SANITIZE
++ bool "Sanitize SLAB allocations"
++ depends on SLUB
++ default y
++ help
++ Zero fill slab allocations on free, reducing the lifetime of
++ sensitive data and helping to mitigate use-after-free bugs.
++
++ For slabs with debug poisoning enabling, this has no impact.
++
++config SLAB_SANITIZE_VERIFY
++ depends on SLAB_SANITIZE && PAGE_SANITIZE
++ default y
++ bool "Verify sanitized SLAB allocations"
++ help
++ Verify that newly allocated slab allocations are zeroed to detect
++ write-after-free bugs.
++
+ config SLUB_CPU_PARTIAL
+ default y
+ depends on SLUB && SMP
+diff --git a/kernel/audit.c b/kernel/audit.c
+index 2a8058764aa6..14e7a763db43 100644
+--- a/kernel/audit.c
++++ b/kernel/audit.c
+@@ -1628,6 +1628,9 @@ static int __init audit_enable(char *str)
+
+ if (audit_default == AUDIT_OFF)
+ audit_initialized = AUDIT_DISABLED;
++ else if (!audit_ever_enabled)
++ audit_initialized = AUDIT_UNINITIALIZED;
++
+ if (audit_set_enabled(audit_default))
+ pr_err("audit: error setting audit state (%d)\n",
+ audit_default);
+diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
+index bad9985b8a08..453be8764a8c 100644
+--- a/kernel/bpf/core.c
++++ b/kernel/bpf/core.c
+@@ -370,7 +370,7 @@ void bpf_prog_kallsyms_del_all(struct bpf_prog *fp)
+
+ /* All BPF JIT sysctl knobs here. */
+ int bpf_jit_enable __read_mostly = IS_BUILTIN(CONFIG_BPF_JIT_ALWAYS_ON);
+-int bpf_jit_harden __read_mostly;
++int bpf_jit_harden __read_mostly = 2;
+ int bpf_jit_kallsyms __read_mostly;
+ int bpf_jit_limit __read_mostly = BPF_JIT_LIMIT_DEFAULT;
+
+diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
+index ede82382dd32..98591574df41 100644
+--- a/kernel/bpf/syscall.c
++++ b/kernel/bpf/syscall.c
+@@ -48,7 +48,7 @@ static DEFINE_SPINLOCK(prog_idr_lock);
+ static DEFINE_IDR(map_idr);
+ static DEFINE_SPINLOCK(map_idr_lock);
+
+-int sysctl_unprivileged_bpf_disabled __read_mostly;
++int sysctl_unprivileged_bpf_disabled __read_mostly = 1;
+
+ static const struct bpf_map_ops * const bpf_map_types[] = {
+ #define BPF_PROG_TYPE(_id, _ops)
+diff --git a/kernel/capability.c b/kernel/capability.c
+index 1e1c0236f55b..452062fe45ce 100644
+--- a/kernel/capability.c
++++ b/kernel/capability.c
+@@ -431,6 +431,12 @@ bool capable(int cap)
+ return ns_capable(&init_user_ns, cap);
+ }
+ EXPORT_SYMBOL(capable);
++
++bool capable_noaudit(int cap)
++{
++ return ns_capable_noaudit(&init_user_ns, cap);
++}
++EXPORT_SYMBOL(capable_noaudit);
+ #endif /* CONFIG_MULTIUSER */
+
+ /**
+diff --git a/kernel/events/core.c b/kernel/events/core.c
+index 171b83ebed4a..c38d8bf68b6b 100644
+--- a/kernel/events/core.c
++++ b/kernel/events/core.c
+@@ -397,8 +397,13 @@ static cpumask_var_t perf_online_mask;
+ * 0 - disallow raw tracepoint access for unpriv
+ * 1 - disallow cpu events for unpriv
+ * 2 - disallow kernel profiling for unpriv
++ * 3 - disallow all unpriv perf event use
+ */
++#ifdef CONFIG_SECURITY_PERF_EVENTS_RESTRICT
++int sysctl_perf_event_paranoid __read_mostly = 3;
++#else
+ int sysctl_perf_event_paranoid __read_mostly = 2;
++#endif
+
+ /* Minimum for 512 kiB + 1 user control page */
+ int sysctl_perf_event_mlock __read_mostly = 512 + (PAGE_SIZE / 1024); /* 'free' kiB per user */
+@@ -10462,6 +10467,9 @@ SYSCALL_DEFINE5(perf_event_open,
+ if (flags & ~PERF_FLAG_ALL)
+ return -EINVAL;
+
++ if (perf_paranoid_any() && !capable(CAP_SYS_ADMIN))
++ return -EACCES;
++
+ err = perf_copy_attr(attr_uptr, &attr);
+ if (err)
+ return err;
+diff --git a/kernel/fork.c b/kernel/fork.c
+index 69874db3fba8..44f666f2b7b7 100644
+--- a/kernel/fork.c
++++ b/kernel/fork.c
+@@ -103,6 +103,11 @@
+
+ #define CREATE_TRACE_POINTS
+ #include <trace/events/task.h>
++#ifdef CONFIG_USER_NS
++extern int unprivileged_userns_clone;
++#else
++#define unprivileged_userns_clone 0
++#endif
+
+ /*
+ * Minimum number of threads to boot the kernel
+@@ -1674,6 +1679,10 @@ static __latent_entropy struct task_struct *copy_process(
+ if ((clone_flags & (CLONE_NEWUSER|CLONE_FS)) == (CLONE_NEWUSER|CLONE_FS))
+ return ERR_PTR(-EINVAL);
+
++ if ((clone_flags & CLONE_NEWUSER) && !unprivileged_userns_clone)
++ if (!capable(CAP_SYS_ADMIN))
++ return ERR_PTR(-EPERM);
++
+ /*
+ * Thread groups must share signals as well, and detached threads
+ * can only be started up within the thread group.
+@@ -2503,6 +2512,12 @@ int ksys_unshare(unsigned long unshare_flags)
+ if (unshare_flags & CLONE_NEWNS)
+ unshare_flags |= CLONE_FS;
+
++ if ((unshare_flags & CLONE_NEWUSER) && !unprivileged_userns_clone) {
++ err = -EPERM;
++ if (!capable(CAP_SYS_ADMIN))
++ goto bad_unshare_out;
++ }
++
+ err = check_unshare_flags(unshare_flags);
+ if (err)
+ goto bad_unshare_out;
+diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
+index 3d37c279c090..0789ca413f09 100644
+--- a/kernel/power/snapshot.c
++++ b/kernel/power/snapshot.c
+@@ -1138,7 +1138,7 @@ void free_basic_memory_bitmaps(void)
+
+ void clear_free_pages(void)
+ {
+-#ifdef CONFIG_PAGE_POISONING_ZERO
++#if defined(CONFIG_PAGE_POISONING_ZERO) || defined(CONFIG_PAGE_SANITIZE)
+ struct memory_bitmap *bm = free_pages_map;
+ unsigned long pfn;
+
+@@ -1155,7 +1155,7 @@ void clear_free_pages(void)
+ }
+ memory_bm_position_reset(bm);
+ pr_info("free pages cleared after restore\n");
+-#endif /* PAGE_POISONING_ZERO */
++#endif /* PAGE_POISONING_ZERO || PAGE_SANITIZE */
+ }
+
+ /**
+diff --git a/kernel/rcu/tiny.c b/kernel/rcu/tiny.c
+index befc9321a89c..61e19256560c 100644
+--- a/kernel/rcu/tiny.c
++++ b/kernel/rcu/tiny.c
+@@ -162,7 +162,7 @@ static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp)
+ }
+ }
+
+-static __latent_entropy void rcu_process_callbacks(struct softirq_action *unused)
++static __latent_entropy void rcu_process_callbacks(void)
+ {
+ __rcu_process_callbacks(&rcu_sched_ctrlblk);
+ __rcu_process_callbacks(&rcu_bh_ctrlblk);
+diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
+index f7e89c989df7..527c170810fc 100644
+--- a/kernel/rcu/tree.c
++++ b/kernel/rcu/tree.c
+@@ -2870,7 +2870,7 @@ __rcu_process_callbacks(struct rcu_state *rsp)
+ /*
+ * Do RCU core processing for the current CPU.
+ */
+-static __latent_entropy void rcu_process_callbacks(struct softirq_action *unused)
++static __latent_entropy void rcu_process_callbacks(void)
+ {
+ struct rcu_state *rsp;
+
+diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
+index 4a433608ba74..41d9b1656818 100644
+--- a/kernel/sched/fair.c
++++ b/kernel/sched/fair.c
+@@ -9627,7 +9627,7 @@ static int idle_balance(struct rq *this_rq, struct rq_flags *rf)
+ * run_rebalance_domains is triggered when needed from the scheduler tick.
+ * Also triggered for nohz idle balancing (with nohz_balancing_kick set).
+ */
+-static __latent_entropy void run_rebalance_domains(struct softirq_action *h)
++static __latent_entropy void run_rebalance_domains(void)
+ {
+ struct rq *this_rq = this_rq();
+ enum cpu_idle_type idle = this_rq->idle_balance ?
+diff --git a/kernel/softirq.c b/kernel/softirq.c
+index 6f584861d329..1943fe60f3b9 100644
+--- a/kernel/softirq.c
++++ b/kernel/softirq.c
+@@ -53,7 +53,7 @@ DEFINE_PER_CPU_ALIGNED(irq_cpustat_t, irq_stat);
+ EXPORT_PER_CPU_SYMBOL(irq_stat);
+ #endif
+
+-static struct softirq_action softirq_vec[NR_SOFTIRQS] __cacheline_aligned_in_smp;
++static struct softirq_action softirq_vec[NR_SOFTIRQS] __ro_after_init __aligned(PAGE_SIZE);
+
+ DEFINE_PER_CPU(struct task_struct *, ksoftirqd);
+
+@@ -289,7 +289,7 @@ asmlinkage __visible void __softirq_entry __do_softirq(void)
+ kstat_incr_softirqs_this_cpu(vec_nr);
+
+ trace_softirq_entry(vec_nr);
+- h->action(h);
++ h->action();
+ trace_softirq_exit(vec_nr);
+ if (unlikely(prev_count != preempt_count())) {
+ pr_err("huh, entered softirq %u %s %p with preempt_count %08x, exited with %08x?\n",
+@@ -451,7 +451,7 @@ void __raise_softirq_irqoff(unsigned int nr)
+ or_softirq_pending(1UL << nr);
+ }
+
+-void open_softirq(int nr, void (*action)(struct softirq_action *))
++void __init open_softirq(int nr, void (*action)(void))
+ {
+ softirq_vec[nr].action = action;
+ }
+@@ -497,8 +497,7 @@ void __tasklet_hi_schedule(struct tasklet_struct *t)
+ }
+ EXPORT_SYMBOL(__tasklet_hi_schedule);
+
+-static void tasklet_action_common(struct softirq_action *a,
+- struct tasklet_head *tl_head,
++static void tasklet_action_common(struct tasklet_head *tl_head,
+ unsigned int softirq_nr)
+ {
+ struct tasklet_struct *list;
+@@ -535,14 +534,14 @@ static void tasklet_action_common(struct softirq_action *a,
+ }
+ }
+
+-static __latent_entropy void tasklet_action(struct softirq_action *a)
++static __latent_entropy void tasklet_action(void)
+ {
+- tasklet_action_common(a, this_cpu_ptr(&tasklet_vec), TASKLET_SOFTIRQ);
++ tasklet_action_common(this_cpu_ptr(&tasklet_vec), TASKLET_SOFTIRQ);
+ }
+
+-static __latent_entropy void tasklet_hi_action(struct softirq_action *a)
++static __latent_entropy void tasklet_hi_action(void)
+ {
+- tasklet_action_common(a, this_cpu_ptr(&tasklet_hi_vec), HI_SOFTIRQ);
++ tasklet_action_common(this_cpu_ptr(&tasklet_hi_vec), HI_SOFTIRQ);
+ }
+
+ void tasklet_init(struct tasklet_struct *t,
+diff --git a/kernel/sysctl.c b/kernel/sysctl.c
+index 9a85c7ae7362..20221265a603 100644
+--- a/kernel/sysctl.c
++++ b/kernel/sysctl.c
+@@ -67,6 +67,7 @@
+ #include <linux/bpf.h>
+ #include <linux/mount.h>
+ #include <linux/pipe_fs_i.h>
++#include <linux/tty.h>
+
+ #include <linux/uaccess.h>
+ #include <asm/processor.h>
+@@ -99,12 +100,19 @@
+ #if defined(CONFIG_SYSCTL)
+
+ /* External variables not in a header file. */
++#if IS_ENABLED(CONFIG_USB)
++int deny_new_usb __read_mostly = 0;
++EXPORT_SYMBOL(deny_new_usb);
++#endif
+ extern int suid_dumpable;
+ #ifdef CONFIG_COREDUMP
+ extern int core_uses_pid;
+ extern char core_pattern[];
+ extern unsigned int core_pipe_limit;
+ #endif
++#ifdef CONFIG_USER_NS
++extern int unprivileged_userns_clone;
++#endif
+ extern int pid_max;
+ extern int pid_max_min, pid_max_max;
+ extern int percpu_pagelist_fraction;
+@@ -116,35 +124,35 @@ extern int sysctl_nr_trim_pages;
+
+ /* Constants used for minimum and maximum */
+ #ifdef CONFIG_LOCKUP_DETECTOR
+-static int sixty = 60;
++static int sixty __read_only = 60;
+ #endif
+
+-static int __maybe_unused neg_one = -1;
++static int __maybe_unused neg_one __read_only = -1;
+
+ static int zero;
+-static int __maybe_unused one = 1;
+-static int __maybe_unused two = 2;
+-static int __maybe_unused four = 4;
+-static unsigned long zero_ul;
+-static unsigned long one_ul = 1;
+-static unsigned long long_max = LONG_MAX;
+-static int one_hundred = 100;
+-static int one_thousand = 1000;
++static int __maybe_unused one __read_only = 1;
++static int __maybe_unused two __read_only = 2;
++static int __maybe_unused four __read_only = 4;
++static unsigned long zero_ul __read_only;
++static unsigned long one_ul __read_only = 1;
++static unsigned long long_max __read_only = LONG_MAX;
++static int one_hundred __read_only = 100;
++static int one_thousand __read_only = 1000;
+ #ifdef CONFIG_PRINTK
+-static int ten_thousand = 10000;
++static int ten_thousand __read_only = 10000;
+ #endif
+ #ifdef CONFIG_PERF_EVENTS
+-static int six_hundred_forty_kb = 640 * 1024;
++static int six_hundred_forty_kb __read_only = 640 * 1024;
+ #endif
+
+ /* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */
+-static unsigned long dirty_bytes_min = 2 * PAGE_SIZE;
++static unsigned long dirty_bytes_min __read_only = 2 * PAGE_SIZE;
+
+ /* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */
+-static int maxolduid = 65535;
+-static int minolduid;
++static int maxolduid __read_only = 65535;
++static int minolduid __read_only;
+
+-static int ngroups_max = NGROUPS_MAX;
++static int ngroups_max __read_only = NGROUPS_MAX;
+ static const int cap_last_cap = CAP_LAST_CAP;
+
+ /*
+@@ -152,9 +160,12 @@ static const int cap_last_cap = CAP_LAST_CAP;
+ * and hung_task_check_interval_secs
+ */
+ #ifdef CONFIG_DETECT_HUNG_TASK
+-static unsigned long hung_task_timeout_max = (LONG_MAX/HZ);
++static unsigned long hung_task_timeout_max __read_only = (LONG_MAX/HZ);
+ #endif
+
++int device_sidechannel_restrict __read_mostly = 1;
++EXPORT_SYMBOL(device_sidechannel_restrict);
++
+ #ifdef CONFIG_INOTIFY_USER
+ #include <linux/inotify.h>
+ #endif
+@@ -298,19 +309,19 @@ static struct ctl_table sysctl_base_table[] = {
+ };
+
+ #ifdef CONFIG_SCHED_DEBUG
+-static int min_sched_granularity_ns = 100000; /* 100 usecs */
+-static int max_sched_granularity_ns = NSEC_PER_SEC; /* 1 second */
+-static int min_wakeup_granularity_ns; /* 0 usecs */
+-static int max_wakeup_granularity_ns = NSEC_PER_SEC; /* 1 second */
++static int min_sched_granularity_ns __read_only = 100000; /* 100 usecs */
++static int max_sched_granularity_ns __read_only = NSEC_PER_SEC; /* 1 second */
++static int min_wakeup_granularity_ns __read_only; /* 0 usecs */
++static int max_wakeup_granularity_ns __read_only = NSEC_PER_SEC; /* 1 second */
+ #ifdef CONFIG_SMP
+-static int min_sched_tunable_scaling = SCHED_TUNABLESCALING_NONE;
+-static int max_sched_tunable_scaling = SCHED_TUNABLESCALING_END-1;
++static int min_sched_tunable_scaling __read_only = SCHED_TUNABLESCALING_NONE;
++static int max_sched_tunable_scaling __read_only = SCHED_TUNABLESCALING_END-1;
+ #endif /* CONFIG_SMP */
+ #endif /* CONFIG_SCHED_DEBUG */
+
+ #ifdef CONFIG_COMPACTION
+-static int min_extfrag_threshold;
+-static int max_extfrag_threshold = 1000;
++static int min_extfrag_threshold __read_only;
++static int max_extfrag_threshold __read_only = 1000;
+ #endif
+
+ static struct ctl_table kern_table[] = {
+@@ -516,6 +527,15 @@ static struct ctl_table kern_table[] = {
+ .proc_handler = proc_dointvec,
+ },
+ #endif
++#ifdef CONFIG_USER_NS
++ {
++ .procname = "unprivileged_userns_clone",
++ .data = &unprivileged_userns_clone,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = proc_dointvec,
++ },
++#endif
+ #ifdef CONFIG_PROC_SYSCTL
+ {
+ .procname = "tainted",
+@@ -864,6 +884,37 @@ static struct ctl_table kern_table[] = {
+ .extra1 = &zero,
+ .extra2 = &two,
+ },
++#endif
++#if defined CONFIG_TTY
++ {
++ .procname = "tiocsti_restrict",
++ .data = &tiocsti_restrict,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = proc_dointvec_minmax_sysadmin,
++ .extra1 = &zero,
++ .extra2 = &one,
++ },
++#endif
++ {
++ .procname = "device_sidechannel_restrict",
++ .data = &device_sidechannel_restrict,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = proc_dointvec_minmax_sysadmin,
++ .extra1 = &zero,
++ .extra2 = &one,
++ },
++#if IS_ENABLED(CONFIG_USB)
++ {
++ .procname = "deny_new_usb",
++ .data = &deny_new_usb,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = proc_dointvec_minmax_sysadmin,
++ .extra1 = &zero,
++ .extra2 = &one,
++ },
+ #endif
+ {
+ .procname = "ngroups_max",
+diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c
+index e1a549c9e399..c560063e3a8c 100644
+--- a/kernel/time/hrtimer.c
++++ b/kernel/time/hrtimer.c
+@@ -1462,7 +1462,7 @@ static void __hrtimer_run_queues(struct hrtimer_cpu_base *cpu_base, ktime_t now,
+ }
+ }
+
+-static __latent_entropy void hrtimer_run_softirq(struct softirq_action *h)
++static __latent_entropy void hrtimer_run_softirq(void)
+ {
+ struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases);
+ unsigned long flags;
+diff --git a/kernel/time/timer.c b/kernel/time/timer.c
+index fa49cd753dea..a16f8613282e 100644
+--- a/kernel/time/timer.c
++++ b/kernel/time/timer.c
+@@ -1688,7 +1688,7 @@ static inline void __run_timers(struct timer_base *base)
+ /*
+ * This function runs timers and the timer-tq in bottom half context.
+ */
+-static __latent_entropy void run_timer_softirq(struct softirq_action *h)
++static __latent_entropy void run_timer_softirq(void)
+ {
+ struct timer_base *base = this_cpu_ptr(&timer_bases[BASE_STD]);
+
+diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
+index 923414a246e9..6b9dbc257e34 100644
+--- a/kernel/user_namespace.c
++++ b/kernel/user_namespace.c
+@@ -26,6 +26,9 @@
+ #include <linux/bsearch.h>
+ #include <linux/sort.h>
+
++/* sysctl */
++int unprivileged_userns_clone;
++
+ static struct kmem_cache *user_ns_cachep __read_mostly;
+ static DEFINE_MUTEX(userns_state_mutex);
+
+diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
+index 3dea52f7be9c..9074878fe25b 100644
+--- a/lib/Kconfig.debug
++++ b/lib/Kconfig.debug
+@@ -950,6 +950,7 @@ endmenu # "Debug lockups and hangs"
+
+ config PANIC_ON_OOPS
+ bool "Panic on Oops"
++ default y
+ help
+ Say Y here to enable the kernel to panic when it oopses. This
+ has the same effect as setting oops=panic on the kernel command
+@@ -959,7 +960,7 @@ config PANIC_ON_OOPS
+ anything erroneous after an oops which could result in data
+ corruption or other issues.
+
+- Say N if unsure.
++ Say Y if unsure.
+
+ config PANIC_ON_OOPS_VALUE
+ int
+@@ -1328,6 +1329,7 @@ config DEBUG_BUGVERBOSE
+ config DEBUG_LIST
+ bool "Debug linked list manipulation"
+ depends on DEBUG_KERNEL || BUG_ON_DATA_CORRUPTION
++ default y
+ help
+ Enable this to turn on extended checks in the linked-list
+ walking routines.
+@@ -1983,6 +1985,7 @@ config MEMTEST
+ config BUG_ON_DATA_CORRUPTION
+ bool "Trigger a BUG when data corruption is detected"
+ select DEBUG_LIST
++ default y
+ help
+ Select this option if the kernel should BUG when it encounters
+ data corruption in kernel memory structures when they get checked
+@@ -2022,6 +2025,7 @@ config STRICT_DEVMEM
+ config IO_STRICT_DEVMEM
+ bool "Filter I/O access to /dev/mem"
+ depends on STRICT_DEVMEM
++ default y
+ ---help---
+ If this option is disabled, you allow userspace (root) access to all
+ io-memory regardless of whether a driver is actively using that
+diff --git a/lib/irq_poll.c b/lib/irq_poll.c
+index 86a709954f5a..6f15787fcb1b 100644
+--- a/lib/irq_poll.c
++++ b/lib/irq_poll.c
+@@ -75,7 +75,7 @@ void irq_poll_complete(struct irq_poll *iop)
+ }
+ EXPORT_SYMBOL(irq_poll_complete);
+
+-static void __latent_entropy irq_poll_softirq(struct softirq_action *h)
++static void __latent_entropy irq_poll_softirq(void)
+ {
+ struct list_head *list = this_cpu_ptr(&blk_cpu_iopoll);
+ int rearm = 0, budget = irq_poll_budget;
+diff --git a/lib/kobject.c b/lib/kobject.c
+index 97d86dc17c42..388257c2878b 100644
+--- a/lib/kobject.c
++++ b/lib/kobject.c
+@@ -978,9 +978,9 @@ EXPORT_SYMBOL_GPL(kset_create_and_add);
+
+
+ static DEFINE_SPINLOCK(kobj_ns_type_lock);
+-static const struct kobj_ns_type_operations *kobj_ns_ops_tbl[KOBJ_NS_TYPES];
++static const struct kobj_ns_type_operations *kobj_ns_ops_tbl[KOBJ_NS_TYPES] __ro_after_init;
+
+-int kobj_ns_type_register(const struct kobj_ns_type_operations *ops)
++int __init kobj_ns_type_register(const struct kobj_ns_type_operations *ops)
+ {
+ enum kobj_ns_type type = ops->type;
+ int error;
+diff --git a/lib/nlattr.c b/lib/nlattr.c
+index e335bcafa9e4..f6334f882b1f 100644
+--- a/lib/nlattr.c
++++ b/lib/nlattr.c
+@@ -364,6 +364,8 @@ int nla_memcpy(void *dest, const struct nlattr *src, int count)
+ {
+ int minlen = min_t(int, count, nla_len(src));
+
++ BUG_ON(minlen < 0);
++
+ memcpy(dest, nla_data(src), minlen);
+ if (count > minlen)
+ memset(dest + minlen, 0, count - minlen);
+diff --git a/lib/vsprintf.c b/lib/vsprintf.c
+index 812e59e13fe6..2c2104884c81 100644
+--- a/lib/vsprintf.c
++++ b/lib/vsprintf.c
+@@ -1371,7 +1371,7 @@ char *pointer_string(char *buf, char *end, const void *ptr,
+ return number(buf, end, (unsigned long int)ptr, spec);
+ }
+
+-int kptr_restrict __read_mostly;
++int kptr_restrict __read_mostly = 2;
+
+ static noinline_for_stack
+ char *restricted_pointer(char *buf, char *end, const void *ptr,
+diff --git a/mm/Kconfig b/mm/Kconfig
+index de64ea658716..8bff017856eb 100644
+--- a/mm/Kconfig
++++ b/mm/Kconfig
+@@ -311,7 +311,8 @@ config KSM
+ config DEFAULT_MMAP_MIN_ADDR
+ int "Low address space to protect from user allocation"
+ depends on MMU
+- default 4096
++ default 32768 if ARM || (ARM64 && COMPAT)
++ default 65536
+ help
+ This is the portion of low virtual memory which should be protected
+ from userspace allocation. Keeping a user from writing to low pages
+diff --git a/mm/mmap.c b/mm/mmap.c
+index 1480880ff814..0145114c44b4 100644
+--- a/mm/mmap.c
++++ b/mm/mmap.c
+@@ -230,6 +230,13 @@ SYSCALL_DEFINE1(brk, unsigned long, brk)
+
+ newbrk = PAGE_ALIGN(brk);
+ oldbrk = PAGE_ALIGN(mm->brk);
++ /* properly handle unaligned min_brk as an empty heap */
++ if (min_brk & ~PAGE_MASK) {
++ if (brk == min_brk)
++ newbrk -= PAGE_SIZE;
++ if (mm->brk == min_brk)
++ oldbrk -= PAGE_SIZE;
++ }
+ if (oldbrk == newbrk)
+ goto set_brk;
+
+diff --git a/mm/page_alloc.c b/mm/page_alloc.c
+index 8e6932a140b8..1f9c55809c56 100644
+--- a/mm/page_alloc.c
++++ b/mm/page_alloc.c
+@@ -66,6 +66,7 @@
+ #include <linux/ftrace.h>
+ #include <linux/lockdep.h>
+ #include <linux/nmi.h>
++#include <linux/random.h>
+
+ #include <asm/sections.h>
+ #include <asm/tlbflush.h>
+@@ -99,6 +100,15 @@ int _node_numa_mem_[MAX_NUMNODES];
+ DEFINE_MUTEX(pcpu_drain_mutex);
+ DEFINE_PER_CPU(struct work_struct, pcpu_drain);
+
++bool __meminitdata extra_latent_entropy;
++
++static int __init setup_extra_latent_entropy(char *str)
++{
++ extra_latent_entropy = true;
++ return 0;
++}
++early_param("extra_latent_entropy", setup_extra_latent_entropy);
++
+ #ifdef CONFIG_GCC_PLUGIN_LATENT_ENTROPY
+ volatile unsigned long latent_entropy __latent_entropy;
+ EXPORT_SYMBOL(latent_entropy);
+@@ -1055,6 +1065,13 @@ static __always_inline bool free_pages_prepare(struct page *page,
+ debug_check_no_obj_freed(page_address(page),
+ PAGE_SIZE << order);
+ }
++
++ if (IS_ENABLED(CONFIG_PAGE_SANITIZE)) {
++ int i;
++ for (i = 0; i < (1 << order); i++)
++ clear_highpage(page + i);
++ }
++
+ arch_free_page(page, order);
+ kernel_poison_pages(page, 1 << order, 0);
+ kernel_map_pages(page, 1 << order, 0);
+@@ -1295,6 +1312,21 @@ static void __init __free_pages_boot_core(struct page *page, unsigned int order)
+ __ClearPageReserved(p);
+ set_page_count(p, 0);
+
++ if (extra_latent_entropy && !PageHighMem(page) && page_to_pfn(page) < 0x100000) {
++ unsigned long hash = 0;
++ size_t index, end = PAGE_SIZE * nr_pages / sizeof hash;
++ const unsigned long *data = lowmem_page_address(page);
++
++ for (index = 0; index < end; index++)
++ hash ^= hash + data[index];
++#ifdef CONFIG_GCC_PLUGIN_LATENT_ENTROPY
++ latent_entropy ^= hash;
++ add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
++#else
++ add_device_randomness((const void *)&hash, sizeof(hash));
++#endif
++ }
++
+ page_zone(page)->managed_pages += nr_pages;
+ set_page_refcounted(page);
+ __free_pages(page, order);
+@@ -1876,8 +1908,8 @@ static inline int check_new_page(struct page *page)
+
+ static inline bool free_pages_prezeroed(void)
+ {
+- return IS_ENABLED(CONFIG_PAGE_POISONING_ZERO) &&
+- page_poisoning_enabled();
++ return IS_ENABLED(CONFIG_PAGE_SANITIZE) ||
++ (IS_ENABLED(CONFIG_PAGE_POISONING_ZERO) && page_poisoning_enabled());
+ }
+
+ #ifdef CONFIG_DEBUG_VM
+@@ -1934,6 +1966,11 @@ static void prep_new_page(struct page *page, unsigned int order, gfp_t gfp_flags
+
+ post_alloc_hook(page, order, gfp_flags);
+
++ if (IS_ENABLED(CONFIG_PAGE_SANITIZE_VERIFY)) {
++ for (i = 0; i < (1 << order); i++)
++ verify_zero_highpage(page + i);
++ }
++
+ if (!free_pages_prezeroed() && (gfp_flags & __GFP_ZERO))
+ for (i = 0; i < (1 << order); i++)
+ clear_highpage(page + i);
+diff --git a/mm/slab.h b/mm/slab.h
+index 9632772e14be..802ff9ee8172 100644
+--- a/mm/slab.h
++++ b/mm/slab.h
+@@ -314,7 +314,11 @@ static inline bool is_root_cache(struct kmem_cache *s)
+ static inline bool slab_equal_or_root(struct kmem_cache *s,
+ struct kmem_cache *p)
+ {
++#ifdef CONFIG_SLAB_HARDENED
++ return p == s;
++#else
+ return true;
++#endif
+ }
+
+ static inline const char *cache_name(struct kmem_cache *s)
+@@ -366,18 +370,26 @@ static inline struct kmem_cache *cache_from_obj(struct kmem_cache *s, void *x)
+ * to not do even the assignment. In that case, slab_equal_or_root
+ * will also be a constant.
+ */
+- if (!memcg_kmem_enabled() &&
++ if (!IS_ENABLED(CONFIG_SLAB_HARDENED) &&
++ !memcg_kmem_enabled() &&
+ !unlikely(s->flags & SLAB_CONSISTENCY_CHECKS))
+ return s;
+
+ page = virt_to_head_page(x);
++#ifdef CONFIG_SLAB_HARDENED
++ BUG_ON(!PageSlab(page));
++#endif
+ cachep = page->slab_cache;
+ if (slab_equal_or_root(cachep, s))
+ return cachep;
+
+ pr_err("%s: Wrong slab cache. %s but object is from %s\n",
+ __func__, s->name, cachep->name);
++#ifdef CONFIG_BUG_ON_DATA_CORRUPTION
++ BUG_ON(1);
++#else
+ WARN_ON_ONCE(1);
++#endif
+ return s;
+ }
+
+@@ -402,7 +414,7 @@ static inline size_t slab_ksize(const struct kmem_cache *s)
+ * back there or track user information then we can
+ * only use the space before that information.
+ */
+- if (s->flags & (SLAB_TYPESAFE_BY_RCU | SLAB_STORE_USER))
++ if ((s->flags & (SLAB_TYPESAFE_BY_RCU | SLAB_STORE_USER)) || IS_ENABLED(CONFIG_SLAB_CANARY))
+ return s->inuse;
+ /*
+ * Else we can use all the padding etc for the allocation
+diff --git a/mm/slab_common.c b/mm/slab_common.c
+index 4d3c2e76d1ba..7e943cb1eccd 100644
+--- a/mm/slab_common.c
++++ b/mm/slab_common.c
+@@ -27,10 +27,10 @@
+
+ #include "slab.h"
+
+-enum slab_state slab_state;
++enum slab_state slab_state __ro_after_init;
+ LIST_HEAD(slab_caches);
+ DEFINE_MUTEX(slab_mutex);
+-struct kmem_cache *kmem_cache;
++struct kmem_cache *kmem_cache __ro_after_init;
+
+ #ifdef CONFIG_HARDENED_USERCOPY
+ bool usercopy_fallback __ro_after_init =
+@@ -58,7 +58,7 @@ static DECLARE_WORK(slab_caches_to_rcu_destroy_work,
+ /*
+ * Merge control. If this is set then no merging of slab caches will occur.
+ */
+-static bool slab_nomerge = !IS_ENABLED(CONFIG_SLAB_MERGE_DEFAULT);
++static bool slab_nomerge __ro_after_init = !IS_ENABLED(CONFIG_SLAB_MERGE_DEFAULT);
+
+ static int __init setup_slab_nomerge(char *str)
+ {
+diff --git a/mm/slub.c b/mm/slub.c
+index 09c0e24a06d8..26e8c45a889a 100644
+--- a/mm/slub.c
++++ b/mm/slub.c
+@@ -124,6 +124,16 @@ static inline int kmem_cache_debug(struct kmem_cache *s)
+ #endif
+ }
+
++static inline bool has_sanitize(struct kmem_cache *s)
++{
++ return IS_ENABLED(CONFIG_SLAB_SANITIZE) && !(s->flags & (SLAB_TYPESAFE_BY_RCU | SLAB_POISON));
++}
++
++static inline bool has_sanitize_verify(struct kmem_cache *s)
++{
++ return IS_ENABLED(CONFIG_SLAB_SANITIZE_VERIFY) && has_sanitize(s);
++}
++
+ void *fixup_red_left(struct kmem_cache *s, void *p)
+ {
+ if (kmem_cache_debug(s) && s->flags & SLAB_RED_ZONE)
+@@ -297,6 +307,35 @@ static inline void set_freepointer(struct kmem_cache *s, void *object, void *fp)
+ *(void **)freeptr_addr = freelist_ptr(s, fp, freeptr_addr);
+ }
+
++#ifdef CONFIG_SLAB_CANARY
++static inline unsigned long *get_canary(struct kmem_cache *s, void *object)
++{
++ if (s->offset)
++ return object + s->offset + sizeof(void *);
++ return object + s->inuse;
++}
++
++static inline unsigned long get_canary_value(const void *canary, unsigned long value)
++{
++ return (value ^ (unsigned long)canary) & CANARY_MASK;
++}
++
++static inline void set_canary(struct kmem_cache *s, void *object, unsigned long value)
++{
++ unsigned long *canary = get_canary(s, object);
++ *canary = get_canary_value(canary, value);
++}
++
++static inline void check_canary(struct kmem_cache *s, void *object, unsigned long value)
++{
++ unsigned long *canary = get_canary(s, object);
++ BUG_ON(*canary != get_canary_value(canary, value));
++}
++#else
++#define set_canary(s, object, value)
++#define check_canary(s, object, value)
++#endif
++
+ /* Loop over all objects in a slab */
+ #define for_each_object(__p, __s, __addr, __objects) \
+ for (__p = fixup_red_left(__s, __addr); \
+@@ -469,13 +508,13 @@ static inline void *restore_red_left(struct kmem_cache *s, void *p)
+ * Debug settings:
+ */
+ #if defined(CONFIG_SLUB_DEBUG_ON)
+-static slab_flags_t slub_debug = DEBUG_DEFAULT_FLAGS;
++static slab_flags_t slub_debug __ro_after_init = DEBUG_DEFAULT_FLAGS;
+ #else
+-static slab_flags_t slub_debug;
++static slab_flags_t slub_debug __ro_after_init;
+ #endif
+
+-static char *slub_debug_slabs;
+-static int disable_higher_order_debug;
++static char *slub_debug_slabs __ro_after_init;
++static int disable_higher_order_debug __ro_after_init;
+
+ /*
+ * slub is about to manipulate internal object metadata. This memory lies
+@@ -535,6 +574,9 @@ static struct track *get_track(struct kmem_cache *s, void *object,
+ else
+ p = object + s->inuse;
+
++ if (IS_ENABLED(CONFIG_SLAB_CANARY))
++ p = (void *)p + sizeof(void *);
++
+ return p + alloc;
+ }
+
+@@ -674,6 +716,9 @@ static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p)
+ else
+ off = s->inuse;
+
++ if (IS_ENABLED(CONFIG_SLAB_CANARY))
++ off += sizeof(void *);
++
+ if (s->flags & SLAB_STORE_USER)
+ off += 2 * sizeof(struct track);
+
+@@ -803,6 +848,9 @@ static int check_pad_bytes(struct kmem_cache *s, struct page *page, u8 *p)
+ /* Freepointer is placed after the object. */
+ off += sizeof(void *);
+
++ if (IS_ENABLED(CONFIG_SLAB_CANARY))
++ off += sizeof(void *);
++
+ if (s->flags & SLAB_STORE_USER)
+ /* We also have user information there */
+ off += 2 * sizeof(struct track);
+@@ -1417,8 +1465,9 @@ static void setup_object(struct kmem_cache *s, struct page *page,
+ void *object)
+ {
+ setup_object_debug(s, page, object);
++ set_canary(s, object, s->random_inactive);
+ kasan_init_slab_obj(s, object);
+- if (unlikely(s->ctor)) {
++ if (unlikely(s->ctor) && !has_sanitize_verify(s)) {
+ kasan_unpoison_object_data(s, object);
+ s->ctor(object);
+ kasan_poison_object_data(s, object);
+@@ -2700,9 +2749,21 @@ static __always_inline void *slab_alloc_node(struct kmem_cache *s,
+ stat(s, ALLOC_FASTPATH);
+ }
+
+- if (unlikely(gfpflags & __GFP_ZERO) && object)
++ if (has_sanitize_verify(s) && object) {
++ size_t offset = s->offset ? 0 : sizeof(void *);
++ BUG_ON(memchr_inv(object + offset, 0, s->object_size - offset));
++ if (s->ctor)
++ s->ctor(object);
++ if (unlikely(gfpflags & __GFP_ZERO) && offset)
++ memset(object, 0, sizeof(void *));
++ } else if (unlikely(gfpflags & __GFP_ZERO) && object)
+ memset(object, 0, s->object_size);
+
++ if (object) {
++ check_canary(s, object, s->random_inactive);
++ set_canary(s, object, s->random_active);
++ }
++
+ slab_post_alloc_hook(s, gfpflags, 1, &object);
+
+ return object;
+@@ -2909,6 +2970,27 @@ static __always_inline void do_slab_free(struct kmem_cache *s,
+ void *tail_obj = tail ? : head;
+ struct kmem_cache_cpu *c;
+ unsigned long tid;
++ bool sanitize = has_sanitize(s);
++
++ if (IS_ENABLED(CONFIG_SLAB_CANARY) || sanitize) {
++ __maybe_unused int offset = s->offset ? 0 : sizeof(void *);
++ void *x = head;
++
++ while (1) {
++ check_canary(s, x, s->random_active);
++ set_canary(s, x, s->random_inactive);
++
++ if (sanitize) {
++ memset(x + offset, 0, s->object_size - offset);
++ if (!IS_ENABLED(CONFIG_SLAB_SANITIZE_VERIFY) && s->ctor)
++ s->ctor(x);
++ }
++ if (x == tail_obj)
++ break;
++ x = get_freepointer(s, x);
++ }
++ }
++
+ redo:
+ /*
+ * Determine the currently cpus per cpu slab.
+@@ -3085,7 +3167,7 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
+ void **p)
+ {
+ struct kmem_cache_cpu *c;
+- int i;
++ int i, k;
+
+ /* memcg and kmem_cache debug support */
+ s = slab_pre_alloc_hook(s, flags);
+@@ -3122,13 +3204,29 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
+ local_irq_enable();
+
+ /* Clear memory outside IRQ disabled fastpath loop */
+- if (unlikely(flags & __GFP_ZERO)) {
++ if (has_sanitize_verify(s)) {
++ int j;
++
++ for (j = 0; j < i; j++) {
++ size_t offset = s->offset ? 0 : sizeof(void *);
++ BUG_ON(memchr_inv(p[j] + offset, 0, s->object_size - offset));
++ if (s->ctor)
++ s->ctor(p[j]);
++ if (unlikely(flags & __GFP_ZERO) && offset)
++ memset(p[j], 0, sizeof(void *));
++ }
++ } else if (unlikely(flags & __GFP_ZERO)) {
+ int j;
+
+ for (j = 0; j < i; j++)
+ memset(p[j], 0, s->object_size);
+ }
+
++ for (k = 0; k < i; k++) {
++ check_canary(s, p[k], s->random_inactive);
++ set_canary(s, p[k], s->random_active);
++ }
++
+ /* memcg and kmem_cache debug support */
+ slab_post_alloc_hook(s, flags, size, p);
+ return i;
+@@ -3160,9 +3258,9 @@ EXPORT_SYMBOL(kmem_cache_alloc_bulk);
+ * and increases the number of allocations possible without having to
+ * take the list_lock.
+ */
+-static unsigned int slub_min_order;
+-static unsigned int slub_max_order = PAGE_ALLOC_COSTLY_ORDER;
+-static unsigned int slub_min_objects;
++static unsigned int slub_min_order __ro_after_init;
++static unsigned int slub_max_order __ro_after_init = PAGE_ALLOC_COSTLY_ORDER;
++static unsigned int slub_min_objects __ro_after_init;
+
+ /*
+ * Calculate the order of allocation given an slab object size.
+@@ -3334,6 +3432,7 @@ static void early_kmem_cache_node_alloc(int node)
+ init_object(kmem_cache_node, n, SLUB_RED_ACTIVE);
+ init_tracking(kmem_cache_node, n);
+ #endif
++ set_canary(kmem_cache_node, n, kmem_cache_node->random_active);
+ kasan_kmalloc(kmem_cache_node, n, sizeof(struct kmem_cache_node),
+ GFP_KERNEL);
+ init_kmem_cache_node(n);
+@@ -3490,6 +3589,9 @@ static int calculate_sizes(struct kmem_cache *s, int forced_order)
+ size += sizeof(void *);
+ }
+
++ if (IS_ENABLED(CONFIG_SLAB_CANARY))
++ size += sizeof(void *);
++
+ #ifdef CONFIG_SLUB_DEBUG
+ if (flags & SLAB_STORE_USER)
+ /*
+@@ -3562,6 +3664,10 @@ static int kmem_cache_open(struct kmem_cache *s, slab_flags_t flags)
+ #ifdef CONFIG_SLAB_FREELIST_HARDENED
+ s->random = get_random_long();
+ #endif
++#ifdef CONFIG_SLAB_CANARY
++ s->random_active = get_random_long();
++ s->random_inactive = get_random_long();
++#endif
+
+ if (!calculate_sizes(s, -1))
+ goto error;
+@@ -3838,6 +3944,8 @@ void __check_heap_object(const void *ptr, unsigned long n, struct page *page,
+ offset -= s->red_left_pad;
+ }
+
++ check_canary(s, (void *)ptr - offset, s->random_active);
++
+ /* Allow address range falling entirely within usercopy region. */
+ if (offset >= s->useroffset &&
+ offset - s->useroffset <= s->usersize &&
+@@ -3871,7 +3979,11 @@ static size_t __ksize(const void *object)
+ page = virt_to_head_page(object);
+
+ if (unlikely(!PageSlab(page))) {
++#ifdef CONFIG_BUG_ON_DATA_CORRUPTION
++ BUG_ON(!PageCompound(page));
++#else
+ WARN_ON(!PageCompound(page));
++#endif
+ return PAGE_SIZE << compound_order(page);
+ }
+
+@@ -4731,7 +4843,7 @@ enum slab_stat_type {
+ #define SO_TOTAL (1 << SL_TOTAL)
+
+ #ifdef CONFIG_MEMCG
+-static bool memcg_sysfs_enabled = IS_ENABLED(CONFIG_SLUB_MEMCG_SYSFS_ON);
++static bool memcg_sysfs_enabled __ro_after_init = IS_ENABLED(CONFIG_SLUB_MEMCG_SYSFS_ON);
+
+ static int __init setup_slub_memcg_sysfs(char *str)
+ {
+diff --git a/mm/swap.c b/mm/swap.c
+index a3fc028e338e..4a1a899e430c 100644
+--- a/mm/swap.c
++++ b/mm/swap.c
+@@ -93,6 +93,13 @@ static void __put_compound_page(struct page *page)
+ if (!PageHuge(page))
+ __page_cache_release(page);
+ dtor = get_compound_page_dtor(page);
++ if (!PageHuge(page))
++ BUG_ON(dtor != free_compound_page
++#ifdef CONFIG_TRANSPARENT_HUGEPAGE
++ && dtor != free_transhuge_page
++#endif
++ );
++
+ (*dtor)(page);
+ }
+
+diff --git a/net/core/dev.c b/net/core/dev.c
+index 138951d28643..efc5c650c9d7 100644
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -4533,7 +4533,7 @@ int netif_rx_ni(struct sk_buff *skb)
+ }
+ EXPORT_SYMBOL(netif_rx_ni);
+
+-static __latent_entropy void net_tx_action(struct softirq_action *h)
++static __latent_entropy void net_tx_action(void)
+ {
+ struct softnet_data *sd = this_cpu_ptr(&softnet_data);
+
+@@ -6318,7 +6318,7 @@ static int napi_poll(struct napi_struct *n, struct list_head *repoll)
+ return work;
+ }
+
+-static __latent_entropy void net_rx_action(struct softirq_action *h)
++static __latent_entropy void net_rx_action(void)
+ {
+ struct softnet_data *sd = this_cpu_ptr(&softnet_data);
+ unsigned long time_limit = jiffies +
+diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
+index 32cae39cdff6..9141d7ae99b2 100644
+--- a/net/ipv4/Kconfig
++++ b/net/ipv4/Kconfig
+@@ -266,6 +266,7 @@ config IP_PIMSM_V2
+
+ config SYN_COOKIES
+ bool "IP: TCP syncookie support"
++ default y
+ ---help---
+ Normal TCP/IP networking is open to an attack known as "SYN
+ flooding". This denial-of-service attack prevents legitimate remote
+diff --git a/scripts/gcc-plugins/Kconfig b/scripts/gcc-plugins/Kconfig
+index cb0c889e13aa..305f52f58c1a 100644
+--- a/scripts/gcc-plugins/Kconfig
++++ b/scripts/gcc-plugins/Kconfig
+@@ -59,6 +59,11 @@ config GCC_PLUGIN_LATENT_ENTROPY
+ is some slowdown of the boot process (about 0.5%) and fork and
+ irq processing.
+
++ When extra_latent_entropy is passed on the kernel command line,
++ entropy will be extracted from up to the first 4GB of RAM while the
++ runtime memory allocator is being initialized. This costs even more
++ slowdown of the boot process.
++
+ Note that entropy extracted this way is not cryptographically
+ secure!
+
+diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
+index 858cbe56b100..61ade07a967a 100644
+--- a/scripts/mod/modpost.c
++++ b/scripts/mod/modpost.c
+@@ -35,6 +35,7 @@ static int vmlinux_section_warnings = 1;
+ static int warn_unresolved = 0;
+ /* How a symbol is exported */
+ static int sec_mismatch_count = 0;
++static int writable_fptr_count = 0;
+ static int sec_mismatch_verbose = 1;
+ static int sec_mismatch_fatal = 0;
+ /* ignore missing files */
+@@ -954,6 +955,7 @@ enum mismatch {
+ ANY_EXIT_TO_ANY_INIT,
+ EXPORT_TO_INIT_EXIT,
+ EXTABLE_TO_NON_TEXT,
++ DATA_TO_TEXT
+ };
+
+ /**
+@@ -1080,6 +1082,12 @@ static const struct sectioncheck sectioncheck[] = {
+ .good_tosec = {ALL_TEXT_SECTIONS , NULL},
+ .mismatch = EXTABLE_TO_NON_TEXT,
+ .handler = extable_mismatch_handler,
++},
++/* Do not reference code from writable data */
++{
++ .fromsec = { DATA_SECTIONS, NULL },
++ .bad_tosec = { ALL_TEXT_SECTIONS, NULL },
++ .mismatch = DATA_TO_TEXT
+ }
+ };
+
+@@ -1255,10 +1263,10 @@ static Elf_Sym *find_elf_symbol(struct elf_info *elf, Elf64_Sword addr,
+ continue;
+ if (!is_valid_name(elf, sym))
+ continue;
+- if (sym->st_value == addr)
+- return sym;
+ /* Find a symbol nearby - addr are maybe negative */
+ d = sym->st_value - addr;
++ if (d == 0)
++ return sym;
+ if (d < 0)
+ d = addr - sym->st_value;
+ if (d < distance) {
+@@ -1393,7 +1401,11 @@ static void report_sec_mismatch(const char *modname,
+ char *prl_from;
+ char *prl_to;
+
+- sec_mismatch_count++;
++ if (mismatch->mismatch == DATA_TO_TEXT)
++ writable_fptr_count++;
++ else
++ sec_mismatch_count++;
++
+ if (!sec_mismatch_verbose)
+ return;
+
+@@ -1517,6 +1529,14 @@ static void report_sec_mismatch(const char *modname,
+ fatal("There's a special handler for this mismatch type, "
+ "we should never get here.");
+ break;
++ case DATA_TO_TEXT:
++#if 0
++ fprintf(stderr,
++ "The %s %s:%s references\n"
++ "the %s %s:%s%s\n",
++ from, fromsec, fromsym, to, tosec, tosym, to_p);
++#endif
++ break;
+ }
+ fprintf(stderr, "\n");
+ }
+@@ -2528,6 +2548,14 @@ int main(int argc, char **argv)
+ }
+ }
+ free(buf.p);
++ if (writable_fptr_count) {
++ if (!sec_mismatch_verbose) {
++ warn("modpost: Found %d writable function pointer(s).\n"
++ "To see full details build your kernel with:\n"
++ "'make CONFIG_DEBUG_SECTION_MISMATCH=y'\n",
++ writable_fptr_count);
++ }
++ }
+
+ return err;
+ }
+diff --git a/security/Kconfig b/security/Kconfig
+index d9aa521b5206..a921713b76ec 100644
+--- a/security/Kconfig
++++ b/security/Kconfig
+@@ -8,7 +8,7 @@ source security/keys/Kconfig
+
+ config SECURITY_DMESG_RESTRICT
+ bool "Restrict unprivileged access to the kernel syslog"
+- default n
++ default y
+ help
+ This enforces restrictions on unprivileged users reading the kernel
+ syslog via dmesg(8).
+@@ -18,10 +18,34 @@ config SECURITY_DMESG_RESTRICT
+
+ If you are unsure how to answer this question, answer N.
+
++config SECURITY_PERF_EVENTS_RESTRICT
++ bool "Restrict unprivileged use of performance events"
++ depends on PERF_EVENTS
++ default y
++ help
++ If you say Y here, the kernel.perf_event_paranoid sysctl
++ will be set to 3 by default, and no unprivileged use of the
++ perf_event_open syscall will be permitted unless it is
++ changed.
++
++config SECURITY_TIOCSTI_RESTRICT
++ bool "Restrict unprivileged use of tiocsti command injection"
++ default y
++ help
++ This enforces restrictions on unprivileged users injecting commands
++ into other processes which share a tty session using the TIOCSTI
++ ioctl. This option makes TIOCSTI use require CAP_SYS_ADMIN.
++
++ If this option is not selected, no restrictions will be enforced
++ unless the tiocsti_restrict sysctl is explicitly set to (1).
++
++ If you are unsure how to answer this question, answer N.
++
+ config SECURITY
+ bool "Enable different security models"
+ depends on SYSFS
+ depends on MULTIUSER
++ default y
+ help
+ This allows you to choose different security modules to be
+ configured into your kernel.
+@@ -48,6 +72,7 @@ config SECURITYFS
+ config SECURITY_NETWORK
+ bool "Socket and Networking Security Hooks"
+ depends on SECURITY
++ default y
+ help
+ This enables the socket and networking security hooks.
+ If enabled, a security module can use these hooks to
+@@ -154,6 +179,7 @@ config HARDENED_USERCOPY
+ bool "Harden memory copies between kernel and userspace"
+ depends on HAVE_HARDENED_USERCOPY_ALLOCATOR
+ imply STRICT_DEVMEM
++ default y
+ help
+ This option checks for obviously wrong memory regions when
+ copying memory to/from the kernel (via copy_to_user() and
+@@ -166,7 +192,6 @@ config HARDENED_USERCOPY
+ config HARDENED_USERCOPY_FALLBACK
+ bool "Allow usercopy whitelist violations to fallback to object size"
+ depends on HARDENED_USERCOPY
+- default y
+ help
+ This is a temporary option that allows missing usercopy whitelists
+ to be discovered via a WARN() to the kernel log, instead of
+@@ -191,10 +216,36 @@ config HARDENED_USERCOPY_PAGESPAN
+ config FORTIFY_SOURCE
+ bool "Harden common str/mem functions against buffer overflows"
+ depends on ARCH_HAS_FORTIFY_SOURCE
++ default y
+ help
+ Detect overflows of buffers in common string and memory functions
+ where the compiler can determine and validate the buffer sizes.
+
++config FORTIFY_SOURCE_STRICT_STRING
++ bool "Harden common functions against buffer overflows"
++ depends on FORTIFY_SOURCE
++ depends on EXPERT
++ help
++ Perform stricter overflow checks catching overflows within objects
++ for common C string functions rather than only between objects.
++
++ This is not yet intended for production use, only bug finding.
++
++config PAGE_SANITIZE
++ bool "Sanitize pages"
++ default y
++ help
++ Zero fill page allocations on free, reducing the lifetime of
++ sensitive data and helping to mitigate use-after-free bugs.
++
++config PAGE_SANITIZE_VERIFY
++ bool "Verify sanitized pages"
++ depends on PAGE_SANITIZE
++ default y
++ help
++ Verify that newly allocated pages are zeroed to detect
++ write-after-free bugs.
++
+ config STATIC_USERMODEHELPER
+ bool "Force all usermode helper calls through a single binary"
+ help
+diff --git a/security/selinux/Kconfig b/security/selinux/Kconfig
+index 8af7a690eb40..6539694b0fd3 100644
+--- a/security/selinux/Kconfig
++++ b/security/selinux/Kconfig
+@@ -2,7 +2,7 @@ config SECURITY_SELINUX
+ bool "NSA SELinux Support"
+ depends on SECURITY_NETWORK && AUDIT && NET && INET
+ select NETWORK_SECMARK
+- default n
++ default y
+ help
+ This selects NSA Security-Enhanced Linux (SELinux).
+ You will also need a policy configuration and a labeled filesystem.
+@@ -79,23 +79,3 @@ config SECURITY_SELINUX_AVC_STATS
+ This option collects access vector cache statistics to
+ /selinux/avc/cache_stats, which may be monitored via
+ tools such as avcstat.
+-
+-config SECURITY_SELINUX_CHECKREQPROT_VALUE
+- int "NSA SELinux checkreqprot default value"
+- depends on SECURITY_SELINUX
+- range 0 1
+- default 0
+- help
+- This option sets the default value for the 'checkreqprot' flag
+- that determines whether SELinux checks the protection requested
+- by the application or the protection that will be applied by the
+- kernel (including any implied execute for read-implies-exec) for
+- mmap and mprotect calls. If this option is set to 0 (zero),
+- SELinux will default to checking the protection that will be applied
+- by the kernel. If this option is set to 1 (one), SELinux will
+- default to checking the protection requested by the application.
+- The checkreqprot flag may be changed from the default via the
+- 'checkreqprot=' boot parameter. It may also be changed at runtime
+- via /selinux/checkreqprot if authorized by policy.
+-
+- If you are unsure how to answer this question, answer 0.
+diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
+index 70bad15ed7a0..a157a3d57cdd 100644
+--- a/security/selinux/hooks.c
++++ b/security/selinux/hooks.c
+@@ -135,18 +135,7 @@ __setup("selinux=", selinux_enabled_setup);
+ int selinux_enabled = 1;
+ #endif
+
+-static unsigned int selinux_checkreqprot_boot =
+- CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE;
+-
+-static int __init checkreqprot_setup(char *str)
+-{
+- unsigned long checkreqprot;
+-
+- if (!kstrtoul(str, 0, &checkreqprot))
+- selinux_checkreqprot_boot = checkreqprot ? 1 : 0;
+- return 1;
+-}
+-__setup("checkreqprot=", checkreqprot_setup);
++static const unsigned int selinux_checkreqprot_boot;
+
+ static struct kmem_cache *sel_inode_cache;
+ static struct kmem_cache *file_security_cache;
+diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
+index f3a5a138a096..d95f3c5fe6f0 100644
+--- a/security/selinux/selinuxfs.c
++++ b/security/selinux/selinuxfs.c
+@@ -640,7 +640,6 @@ static ssize_t sel_read_checkreqprot(struct file *filp, char __user *buf,
+ static ssize_t sel_write_checkreqprot(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+ {
+- struct selinux_fs_info *fsi = file_inode(file)->i_sb->s_fs_info;
+ char *page;
+ ssize_t length;
+ unsigned int new_value;
+@@ -664,10 +663,9 @@ static ssize_t sel_write_checkreqprot(struct file *file, const char __user *buf,
+ return PTR_ERR(page);
+
+ length = -EINVAL;
+- if (sscanf(page, "%u", &new_value) != 1)
++ if (sscanf(page, "%u", &new_value) != 1 || new_value)
+ goto out;
+
+- fsi->state->checkreqprot = new_value ? 1 : 0;
+ length = count;
+ out:
+ kfree(page);
+diff --git a/security/yama/Kconfig b/security/yama/Kconfig
+index 96b27405558a..485c1b85c325 100644
+--- a/security/yama/Kconfig
++++ b/security/yama/Kconfig
+@@ -1,7 +1,7 @@
+ config SECURITY_YAMA
+ bool "Yama support"
+ depends on SECURITY
+- default n
++ default y
+ help
+ This selects Yama, which extends DAC support with additional
+ system-wide security settings beyond regular Linux discretionary
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-mute-pps_state_mismatch.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-mute-pps_state_mismatch.patch
new file mode 100644
index 00000000..5bc1eff7
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-mute-pps_state_mismatch.patch
@@ -0,0 +1,16 @@
+diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
+index 158438bb0389..734718e45aaa 100644
+--- a/drivers/gpu/drm/i915/intel_dp.c
++++ b/drivers/gpu/drm/i915/intel_dp.c
+@@ -5245,7 +5245,10 @@ intel_pps_verify_state(struct drm_i915_private *dev_priv,
+
+ if (hw.t1_t3 != sw->t1_t3 || hw.t8 != sw->t8 || hw.t9 != sw->t9 ||
+ hw.t10 != sw->t10 || hw.t11_t12 != sw->t11_t12) {
+- DRM_ERROR("PPS state mismatch\n");
++ /* seem buggy on 4.14.x .. mute that for now
++ * even is not a real solution ..
++ * DRM_ERROR("PPS state mismatch\n");
++ */
+ intel_pps_dump_state("sw", sw);
+ intel_pps_dump_state("hw", &hw);
+ }
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-nouveau-pascal-backlight.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-nouveau-pascal-backlight.patch
new file mode 100644
index 00000000..754d982a
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-nouveau-pascal-backlight.patch
@@ -0,0 +1,11 @@
+diff -up linux-4.16/drivers/gpu/drm/nouveau/nouveau_backlight.c.omv~ linux-4.16/drivers/gpu/drm/nouveau/nouveau_backlight.c
+--- linux-4.16/drivers/gpu/drm/nouveau/nouveau_backlight.c.omv~ 2018-04-06 01:04:34.573357055 +0200
++++ linux-4.16/drivers/gpu/drm/nouveau/nouveau_backlight.c 2018-04-06 01:05:46.985579248 +0200
+@@ -287,6 +287,7 @@ nouveau_backlight_init(struct drm_device
+ case NV_DEVICE_INFO_V0_FERMI:
+ case NV_DEVICE_INFO_V0_KEPLER:
+ case NV_DEVICE_INFO_V0_MAXWELL:
++ case NV_DEVICE_INFO_V0_PASCAL:
+ return nv50_backlight_init(connector);
+ default:
+ break;
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-radeon_dp_aux_transfer_native-no-ratelimited_debug.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-radeon_dp_aux_transfer_native-no-ratelimited_debug.patch
new file mode 100644
index 00000000..6ffcb42c
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-radeon_dp_aux_transfer_native-no-ratelimited_debug.patch
@@ -0,0 +1,13 @@
+diff --git a/drivers/gpu/drm/radeon/radeon_dp_auxch.c b/drivers/gpu/drm/radeon/radeon_dp_auxch.c
+index 12eac4e75542..a26b8ddd7d3f 100644
+--- a/drivers/gpu/drm/radeon/radeon_dp_auxch.c
++++ b/drivers/gpu/drm/radeon/radeon_dp_auxch.c
+@@ -168,7 +168,7 @@ radeon_dp_aux_transfer_native(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg
+ goto done;
+ }
+ if (tmp & AUX_RX_ERROR_FLAGS) {
+- DRM_DEBUG_KMS_RATELIMITED("dp_aux_ch flags not zero: %08x\n",
++ DRM_DEBUG_KMS("dp_aux_ch flags not zero: %08x\n",
+ tmp);
+ ret = -EIO;
+ goto done;
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-uksm-linux-hardened.patch b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-uksm-linux-hardened.patch
new file mode 100644
index 00000000..9237058b
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/files/4.19-uksm-linux-hardened.patch
@@ -0,0 +1,6941 @@
+diff -Nur a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX
+--- a/Documentation/vm/00-INDEX 2019-06-11 11:20:57.000000000 +0100
++++ b/Documentation/vm/00-INDEX 2019-06-19 19:34:58.729369555 +0100
+@@ -18,6 +18,8 @@
+ - explains what hwpoison is
+ ksm.rst
+ - how to use the Kernel Samepage Merging feature.
++uksm.txt
++ - Introduction to Ultra KSM
+ mmu_notifier.rst
+ - a note about clearing pte/pmd and mmu notifications
+ numa.rst
+diff -Nur a/Documentation/vm/uksm.txt b/Documentation/vm/uksm.txt
+--- a/Documentation/vm/uksm.txt 1970-01-01 01:00:00.000000000 +0100
++++ b/Documentation/vm/uksm.txt 2019-06-19 19:34:58.729369555 +0100
+@@ -0,0 +1,61 @@
++The Ultra Kernel Samepage Merging feature
++----------------------------------------------
++/*
++ * Ultra KSM. Copyright (C) 2011-2012 Nai Xia
++ *
++ * This is an improvement upon KSM. Some basic data structures and routines
++ * are borrowed from ksm.c .
++ *
++ * Its new features:
++ * 1. Full system scan:
++ * It automatically scans all user processes' anonymous VMAs. Kernel-user
++ * interaction to submit a memory area to KSM is no longer needed.
++ *
++ * 2. Rich area detection:
++ * It automatically detects rich areas containing abundant duplicated
++ * pages based. Rich areas are given a full scan speed. Poor areas are
++ * sampled at a reasonable speed with very low CPU consumption.
++ *
++ * 3. Ultra Per-page scan speed improvement:
++ * A new hash algorithm is proposed. As a result, on a machine with
++ * Core(TM)2 Quad Q9300 CPU in 32-bit mode and 800MHZ DDR2 main memory, it
++ * can scan memory areas that does not contain duplicated pages at speed of
++ * 627MB/sec ~ 2445MB/sec and can merge duplicated areas at speed of
++ * 477MB/sec ~ 923MB/sec.
++ *
++ * 4. Thrashing area avoidance:
++ * Thrashing area(an VMA that has frequent Ksm page break-out) can be
++ * filtered out. My benchmark shows it's more efficient than KSM's per-page
++ * hash value based volatile page detection.
++ *
++ *
++ * 5. Misc changes upon KSM:
++ * * It has a fully x86-opitmized memcmp dedicated for 4-byte-aligned page
++ * comparison. It's much faster than default C version on x86.
++ * * rmap_item now has an struct *page member to loosely cache a
++ * address-->page mapping, which reduces too much time-costly
++ * follow_page().
++ * * The VMA creation/exit procedures are hooked to let the Ultra KSM know.
++ * * try_to_merge_two_pages() now can revert a pte if it fails. No break_
++ * ksm is needed for this case.
++ *
++ * 6. Full Zero Page consideration(contributed by Figo Zhang)
++ * Now uksmd consider full zero pages as special pages and merge them to an
++ * special unswappable uksm zero page.
++ */
++
++ChangeLog:
++
++2012-05-05 The creation of this Doc
++2012-05-08 UKSM 0.1.1.1 libc crash bug fix, api clean up, doc clean up.
++2012-05-28 UKSM 0.1.1.2 bug fix release
++2012-06-26 UKSM 0.1.2-beta1 first beta release for 0.1.2
++2012-07-2 UKSM 0.1.2-beta2
++2012-07-10 UKSM 0.1.2-beta3
++2012-07-26 UKSM 0.1.2 Fine grained speed control, more scan optimization.
++2012-10-13 UKSM 0.1.2.1 Bug fixes.
++2012-12-31 UKSM 0.1.2.2 Minor bug fixes.
++2014-07-02 UKSM 0.1.2.3 Fix a " __this_cpu_read() in preemptible bug".
++2015-04-22 UKSM 0.1.2.4 Fix a race condition that can sometimes trigger anonying warnings.
++2016-09-10 UKSM 0.1.2.5 Fix a bug in dedup ratio calculation.
++2017-02-26 UKSM 0.1.2.6 Fix a bug in hugetlbpage handling and a race bug with page migration.
+diff -Nur a/fs/exec.c b/fs/exec.c
+--- a/fs/exec.c 2019-06-19 19:33:03.485533722 +0100
++++ b/fs/exec.c 2019-06-19 19:34:58.729369555 +0100
+@@ -63,6 +63,7 @@
+ #include <linux/compat.h>
+ #include <linux/vmalloc.h>
+ #include <linux/random.h>
++#include <linux/ksm.h>
+
+ #include <linux/uaccess.h>
+ #include <asm/mmu_context.h>
+@@ -1382,6 +1383,7 @@
+ /* An exec changes our domain. We are no longer part of the thread
+ group */
+ current->self_exec_id++;
++
+ flush_signal_handlers(current, 0);
+ }
+ EXPORT_SYMBOL(setup_new_exec);
+diff -Nur a/fs/proc/meminfo.c b/fs/proc/meminfo.c
+--- a/fs/proc/meminfo.c 2019-06-11 11:20:57.000000000 +0100
++++ b/fs/proc/meminfo.c 2019-06-19 19:34:58.729369555 +0100
+@@ -106,6 +106,10 @@
+ global_zone_page_state(NR_KERNEL_STACK_KB));
+ show_val_kb(m, "PageTables: ",
+ global_zone_page_state(NR_PAGETABLE));
++#ifdef CONFIG_UKSM
++ show_val_kb(m, "KsmZeroPages: ",
++ global_zone_page_state(NR_UKSM_ZERO_PAGES));
++#endif
+ #ifdef CONFIG_QUICKLIST
+ show_val_kb(m, "Quicklists: ", quicklist_total_size());
+ #endif
+diff -Nur a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
+--- a/include/asm-generic/pgtable.h 2019-06-11 11:20:57.000000000 +0100
++++ b/include/asm-generic/pgtable.h 2019-06-19 19:34:58.739369890 +0100
+@@ -817,12 +817,25 @@
+ extern void untrack_pfn_moved(struct vm_area_struct *vma);
+ #endif
+
++#ifdef CONFIG_UKSM
++static inline int is_uksm_zero_pfn(unsigned long pfn)
++{
++ extern unsigned long uksm_zero_pfn;
++ return pfn == uksm_zero_pfn;
++}
++#else
++static inline int is_uksm_zero_pfn(unsigned long pfn)
++{
++ return 0;
++}
++#endif
++
+ #ifdef __HAVE_COLOR_ZERO_PAGE
+ static inline int is_zero_pfn(unsigned long pfn)
+ {
+ extern unsigned long zero_pfn;
+ unsigned long offset_from_zero_pfn = pfn - zero_pfn;
+- return offset_from_zero_pfn <= (zero_page_mask >> PAGE_SHIFT);
++ return offset_from_zero_pfn <= (zero_page_mask >> PAGE_SHIFT) || is_uksm_zero_pfn(pfn);
+ }
+
+ #define my_zero_pfn(addr) page_to_pfn(ZERO_PAGE(addr))
+@@ -831,7 +844,7 @@
+ static inline int is_zero_pfn(unsigned long pfn)
+ {
+ extern unsigned long zero_pfn;
+- return pfn == zero_pfn;
++ return (pfn == zero_pfn) || (is_uksm_zero_pfn(pfn));
+ }
+
+ static inline unsigned long my_zero_pfn(unsigned long addr)
+diff -Nur a/include/linux/ksm.h b/include/linux/ksm.h
+--- a/include/linux/ksm.h 2019-06-11 11:20:57.000000000 +0100
++++ b/include/linux/ksm.h 2019-06-19 19:34:58.739369890 +0100
+@@ -1,4 +1,4 @@
+-/* SPDX-License-Identifier: GPL-2.0 */
++/* SPDX-License-Identifier: GPL-3.0 */
+ #ifndef __LINUX_KSM_H
+ #define __LINUX_KSM_H
+ /*
+@@ -21,20 +21,16 @@
+ #ifdef CONFIG_KSM
+ int ksm_madvise(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end, int advice, unsigned long *vm_flags);
+-int __ksm_enter(struct mm_struct *mm);
+-void __ksm_exit(struct mm_struct *mm);
+
+-static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm)
++static inline struct stable_node *page_stable_node(struct page *page)
+ {
+- if (test_bit(MMF_VM_MERGEABLE, &oldmm->flags))
+- return __ksm_enter(mm);
+- return 0;
++ return PageKsm(page) ? page_rmapping(page) : NULL;
+ }
+
+-static inline void ksm_exit(struct mm_struct *mm)
++static inline void set_page_stable_node(struct page *page,
++ struct stable_node *stable_node)
+ {
+- if (test_bit(MMF_VM_MERGEABLE, &mm->flags))
+- __ksm_exit(mm);
++ page->mapping = (void *)((unsigned long)stable_node | PAGE_MAPPING_KSM);
+ }
+
+ /*
+@@ -54,6 +50,33 @@
+ void rmap_walk_ksm(struct page *page, struct rmap_walk_control *rwc);
+ void ksm_migrate_page(struct page *newpage, struct page *oldpage);
+
++#ifdef CONFIG_KSM_LEGACY
++int __ksm_enter(struct mm_struct *mm);
++void __ksm_exit(struct mm_struct *mm);
++static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm)
++{
++ if (test_bit(MMF_VM_MERGEABLE, &oldmm->flags))
++ return __ksm_enter(mm);
++ return 0;
++}
++
++static inline void ksm_exit(struct mm_struct *mm)
++{
++ if (test_bit(MMF_VM_MERGEABLE, &mm->flags))
++ __ksm_exit(mm);
++}
++
++#elif defined(CONFIG_UKSM)
++static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm)
++{
++ return 0;
++}
++
++static inline void ksm_exit(struct mm_struct *mm)
++{
++}
++#endif /* !CONFIG_UKSM */
++
+ #else /* !CONFIG_KSM */
+
+ static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm)
+@@ -89,4 +112,6 @@
+ #endif /* CONFIG_MMU */
+ #endif /* !CONFIG_KSM */
+
++#include <linux/uksm.h>
++
+ #endif /* __LINUX_KSM_H */
+diff -Nur a/include/linux/mm_types.h b/include/linux/mm_types.h
+--- a/include/linux/mm_types.h 2019-06-11 11:20:57.000000000 +0100
++++ b/include/linux/mm_types.h 2019-06-19 19:34:58.739369890 +0100
+@@ -323,6 +323,9 @@
+ struct mempolicy *vm_policy; /* NUMA policy for the VMA */
+ #endif
+ struct vm_userfaultfd_ctx vm_userfaultfd_ctx;
++#ifdef CONFIG_UKSM
++ struct vma_slot *uksm_vma_slot;
++#endif
+ } __randomize_layout;
+
+ struct core_thread {
+diff -Nur a/include/linux/mmzone.h b/include/linux/mmzone.h
+--- a/include/linux/mmzone.h 2019-06-11 11:20:57.000000000 +0100
++++ b/include/linux/mmzone.h 2019-06-19 19:34:58.739369890 +0100
+@@ -148,6 +148,9 @@
+ NR_ZSPAGES, /* allocated in zsmalloc */
+ #endif
+ NR_FREE_CMA_PAGES,
++#ifdef CONFIG_UKSM
++ NR_UKSM_ZERO_PAGES,
++#endif
+ NR_VM_ZONE_STAT_ITEMS };
+
+ enum node_stat_item {
+@@ -867,7 +870,7 @@
+ }
+
+ /**
+- * is_highmem - helper function to quickly check if a struct zone is a
++ * is_highmem - helper function to quickly check if a struct zone is a
+ * highmem zone or not. This is an attempt to keep references
+ * to ZONE_{DMA/NORMAL/HIGHMEM/etc} in general code to a minimum.
+ * @zone - pointer to struct zone variable
+diff -Nur a/include/linux/sradix-tree.h b/include/linux/sradix-tree.h
+--- a/include/linux/sradix-tree.h 1970-01-01 01:00:00.000000000 +0100
++++ b/include/linux/sradix-tree.h 2019-06-19 19:34:58.739369890 +0100
+@@ -0,0 +1,77 @@
++#ifndef _LINUX_SRADIX_TREE_H
++#define _LINUX_SRADIX_TREE_H
++
++
++#define INIT_SRADIX_TREE(root, mask) \
++do { \
++ (root)->height = 0; \
++ (root)->gfp_mask = (mask); \
++ (root)->rnode = NULL; \
++} while (0)
++
++#define ULONG_BITS (sizeof(unsigned long) * 8)
++#define SRADIX_TREE_INDEX_BITS (8 /* CHAR_BIT */ * sizeof(unsigned long))
++//#define SRADIX_TREE_MAP_SHIFT 6
++//#define SRADIX_TREE_MAP_SIZE (1UL << SRADIX_TREE_MAP_SHIFT)
++//#define SRADIX_TREE_MAP_MASK (SRADIX_TREE_MAP_SIZE-1)
++
++struct sradix_tree_node {
++ unsigned int height; /* Height from the bottom */
++ unsigned int count;
++ unsigned int fulls; /* Number of full sublevel trees */
++ struct sradix_tree_node *parent;
++ void *stores[0];
++};
++
++/* A simple radix tree implementation */
++struct sradix_tree_root {
++ unsigned int height;
++ struct sradix_tree_node *rnode;
++
++ /* Where found to have available empty stores in its sublevels */
++ struct sradix_tree_node *enter_node;
++ unsigned int shift;
++ unsigned int stores_size;
++ unsigned int mask;
++ unsigned long min; /* The first hole index */
++ unsigned long num;
++ //unsigned long *height_to_maxindex;
++
++ /* How the node is allocated and freed. */
++ struct sradix_tree_node *(*alloc)(void);
++ void (*free)(struct sradix_tree_node *node);
++
++ /* When a new node is added and removed */
++ void (*extend)(struct sradix_tree_node *parent, struct sradix_tree_node *child);
++ void (*assign)(struct sradix_tree_node *node, unsigned int index, void *item);
++ void (*rm)(struct sradix_tree_node *node, unsigned int offset);
++};
++
++struct sradix_tree_path {
++ struct sradix_tree_node *node;
++ int offset;
++};
++
++static inline
++void init_sradix_tree_root(struct sradix_tree_root *root, unsigned long shift)
++{
++ root->height = 0;
++ root->rnode = NULL;
++ root->shift = shift;
++ root->stores_size = 1UL << shift;
++ root->mask = root->stores_size - 1;
++}
++
++
++extern void *sradix_tree_next(struct sradix_tree_root *root,
++ struct sradix_tree_node *node, unsigned long index,
++ int (*iter)(void *, unsigned long));
++
++extern int sradix_tree_enter(struct sradix_tree_root *root, void **item, int num);
++
++extern void sradix_tree_delete_from_leaf(struct sradix_tree_root *root,
++ struct sradix_tree_node *node, unsigned long index);
++
++extern void *sradix_tree_lookup(struct sradix_tree_root *root, unsigned long index);
++
++#endif /* _LINUX_SRADIX_TREE_H */
+diff -Nur a/include/linux/uksm.h b/include/linux/uksm.h
+--- a/include/linux/uksm.h 1970-01-01 01:00:00.000000000 +0100
++++ b/include/linux/uksm.h 2019-06-19 19:34:58.739369890 +0100
+@@ -0,0 +1,149 @@
++#ifndef __LINUX_UKSM_H
++#define __LINUX_UKSM_H
++/*
++ * Memory merging support.
++ *
++ * This code enables dynamic sharing of identical pages found in different
++ * memory areas, even if they are not shared by fork().
++ */
++
++/* if !CONFIG_UKSM this file should not be compiled at all. */
++#ifdef CONFIG_UKSM
++
++#include <linux/bitops.h>
++#include <linux/mm.h>
++#include <linux/pagemap.h>
++#include <linux/rmap.h>
++#include <linux/sched.h>
++
++extern unsigned long zero_pfn __read_mostly;
++extern unsigned long uksm_zero_pfn __read_mostly;
++extern struct page *empty_uksm_zero_page;
++
++/* must be done before linked to mm */
++extern void uksm_vma_add_new(struct vm_area_struct *vma);
++extern void uksm_remove_vma(struct vm_area_struct *vma);
++
++#define UKSM_SLOT_NEED_SORT (1 << 0)
++#define UKSM_SLOT_NEED_RERAND (1 << 1)
++#define UKSM_SLOT_SCANNED (1 << 2) /* It's scanned in this round */
++#define UKSM_SLOT_FUL_SCANNED (1 << 3)
++#define UKSM_SLOT_IN_UKSM (1 << 4)
++
++struct vma_slot {
++ struct sradix_tree_node *snode;
++ unsigned long sindex;
++
++ struct list_head slot_list;
++ unsigned long fully_scanned_round;
++ unsigned long dedup_num;
++ unsigned long pages_scanned;
++ unsigned long this_sampled;
++ unsigned long last_scanned;
++ unsigned long pages_to_scan;
++ struct scan_rung *rung;
++ struct page **rmap_list_pool;
++ unsigned int *pool_counts;
++ unsigned long pool_size;
++ struct vm_area_struct *vma;
++ struct mm_struct *mm;
++ unsigned long ctime_j;
++ unsigned long pages;
++ unsigned long flags;
++ unsigned long pages_cowed; /* pages cowed this round */
++ unsigned long pages_merged; /* pages merged this round */
++ unsigned long pages_bemerged;
++
++ /* when it has page merged in this eval round */
++ struct list_head dedup_list;
++};
++
++static inline void uksm_unmap_zero_page(pte_t pte)
++{
++ if (pte_pfn(pte) == uksm_zero_pfn)
++ __dec_zone_page_state(empty_uksm_zero_page, NR_UKSM_ZERO_PAGES);
++}
++
++static inline void uksm_map_zero_page(pte_t pte)
++{
++ if (pte_pfn(pte) == uksm_zero_pfn)
++ __inc_zone_page_state(empty_uksm_zero_page, NR_UKSM_ZERO_PAGES);
++}
++
++static inline void uksm_cow_page(struct vm_area_struct *vma, struct page *page)
++{
++ if (vma->uksm_vma_slot && PageKsm(page))
++ vma->uksm_vma_slot->pages_cowed++;
++}
++
++static inline void uksm_cow_pte(struct vm_area_struct *vma, pte_t pte)
++{
++ if (vma->uksm_vma_slot && pte_pfn(pte) == uksm_zero_pfn)
++ vma->uksm_vma_slot->pages_cowed++;
++}
++
++static inline int uksm_flags_can_scan(unsigned long vm_flags)
++{
++#ifdef VM_SAO
++ if (vm_flags & VM_SAO)
++ return 0;
++#endif
++
++ return !(vm_flags & (VM_PFNMAP | VM_IO | VM_DONTEXPAND |
++ VM_HUGETLB | VM_MIXEDMAP | VM_SHARED
++ | VM_MAYSHARE | VM_GROWSUP | VM_GROWSDOWN));
++}
++
++static inline void uksm_vm_flags_mod(unsigned long *vm_flags_p)
++{
++ if (uksm_flags_can_scan(*vm_flags_p))
++ *vm_flags_p |= VM_MERGEABLE;
++}
++
++/*
++ * Just a wrapper for BUG_ON for where ksm_zeropage must not be. TODO: it will
++ * be removed when uksm zero page patch is stable enough.
++ */
++static inline void uksm_bugon_zeropage(pte_t pte)
++{
++ BUG_ON(pte_pfn(pte) == uksm_zero_pfn);
++}
++#else
++static inline void uksm_vma_add_new(struct vm_area_struct *vma)
++{
++}
++
++static inline void uksm_remove_vma(struct vm_area_struct *vma)
++{
++}
++
++static inline void uksm_unmap_zero_page(pte_t pte)
++{
++}
++
++static inline void uksm_map_zero_page(pte_t pte)
++{
++}
++
++static inline void uksm_cow_page(struct vm_area_struct *vma, struct page *page)
++{
++}
++
++static inline void uksm_cow_pte(struct vm_area_struct *vma, pte_t pte)
++{
++}
++
++static inline int uksm_flags_can_scan(unsigned long vm_flags)
++{
++ return 0;
++}
++
++static inline void uksm_vm_flags_mod(unsigned long *vm_flags_p)
++{
++}
++
++static inline void uksm_bugon_zeropage(pte_t pte)
++{
++}
++#endif /* !CONFIG_UKSM */
++#endif /* __LINUX_UKSM_H */
+diff -Nur a/kernel/fork.c b/kernel/fork.c
+--- a/kernel/fork.c 2019-06-19 19:33:03.505534386 +0100
++++ b/kernel/fork.c 2019-06-19 19:34:58.739369890 +0100
+@@ -543,7 +543,7 @@
+ __vma_link_rb(mm, tmp, rb_link, rb_parent);
+ rb_link = &tmp->vm_rb.rb_right;
+ rb_parent = &tmp->vm_rb;
+-
++ uksm_vma_add_new(tmp);
+ mm->map_count++;
+ if (!(tmp->vm_flags & VM_WIPEONFORK))
+ retval = copy_page_range(mm, oldmm, mpnt);
+diff -Nur a/lib/Makefile b/lib/Makefile
+--- a/lib/Makefile 2019-06-11 11:20:57.000000000 +0100
++++ b/lib/Makefile 2019-06-19 19:34:58.739369890 +0100
+@@ -29,7 +29,7 @@
+ endif
+
+ lib-y := ctype.o string.o vsprintf.o cmdline.o \
+- rbtree.o radix-tree.o timerqueue.o\
++ rbtree.o radix-tree.o sradix-tree.o timerqueue.o\
+ idr.o int_sqrt.o extable.o \
+ sha1.o chacha20.o irq_regs.o argv_split.o \
+ flex_proportions.o ratelimit.o show_mem.o \
+diff -Nur a/lib/sradix-tree.c b/lib/sradix-tree.c
+--- a/lib/sradix-tree.c 1970-01-01 01:00:00.000000000 +0100
++++ b/lib/sradix-tree.c 2019-06-19 19:34:58.739369890 +0100
+@@ -0,0 +1,476 @@
++#include <linux/errno.h>
++#include <linux/mm.h>
++#include <linux/mman.h>
++#include <linux/spinlock.h>
++#include <linux/slab.h>
++#include <linux/gcd.h>
++#include <linux/sradix-tree.h>
++
++static inline int sradix_node_full(struct sradix_tree_root *root, struct sradix_tree_node *node)
++{
++ return node->fulls == root->stores_size ||
++ (node->height == 1 && node->count == root->stores_size);
++}
++
++/*
++ * Extend a sradix tree so it can store key @index.
++ */
++static int sradix_tree_extend(struct sradix_tree_root *root, unsigned long index)
++{
++ struct sradix_tree_node *node;
++ unsigned int height;
++
++ if (unlikely(root->rnode == NULL)) {
++ if (!(node = root->alloc()))
++ return -ENOMEM;
++
++ node->height = 1;
++ root->rnode = node;
++ root->height = 1;
++ }
++
++ /* Figure out what the height should be. */
++ height = root->height;
++ index >>= root->shift * height;
++
++ while (index) {
++ index >>= root->shift;
++ height++;
++ }
++
++ while (height > root->height) {
++ unsigned int newheight;
++
++ if (!(node = root->alloc()))
++ return -ENOMEM;
++
++ /* Increase the height. */
++ node->stores[0] = root->rnode;
++ root->rnode->parent = node;
++ if (root->extend)
++ root->extend(node, root->rnode);
++
++ newheight = root->height + 1;
++ node->height = newheight;
++ node->count = 1;
++ if (sradix_node_full(root, root->rnode))
++ node->fulls = 1;
++
++ root->rnode = node;
++ root->height = newheight;
++ }
++
++ return 0;
++}
++
++/*
++ * Search the next item from the current node, that is not NULL
++ * and can satify root->iter().
++ */
++void *sradix_tree_next(struct sradix_tree_root *root,
++ struct sradix_tree_node *node, unsigned long index,
++ int (*iter)(void *item, unsigned long height))
++{
++ unsigned long offset;
++ void *item;
++
++ if (unlikely(node == NULL)) {
++ node = root->rnode;
++ for (offset = 0; offset < root->stores_size; offset++) {
++ item = node->stores[offset];
++ if (item && (!iter || iter(item, node->height)))
++ break;
++ }
++
++ if (unlikely(offset >= root->stores_size))
++ return NULL;
++
++ if (node->height == 1)
++ return item;
++ else
++ goto go_down;
++ }
++
++ while (node) {
++ offset = (index & root->mask) + 1;
++ for (; offset < root->stores_size; offset++) {
++ item = node->stores[offset];
++ if (item && (!iter || iter(item, node->height)))
++ break;
++ }
++
++ if (offset < root->stores_size)
++ break;
++
++ node = node->parent;
++ index >>= root->shift;
++ }
++
++ if (!node)
++ return NULL;
++
++ while (node->height > 1) {
++go_down:
++ node = item;
++ for (offset = 0; offset < root->stores_size; offset++) {
++ item = node->stores[offset];
++ if (item && (!iter || iter(item, node->height)))
++ break;
++ }
++
++ if (unlikely(offset >= root->stores_size))
++ return NULL;
++ }
++
++ BUG_ON(offset > root->stores_size);
++
++ return item;
++}
++
++/*
++ * Blindly insert the item to the tree. Typically, we reuse the
++ * first empty store item.
++ */
++int sradix_tree_enter(struct sradix_tree_root *root, void **item, int num)
++{
++ unsigned long index;
++ unsigned int height;
++ struct sradix_tree_node *node, *tmp = NULL;
++ int offset, offset_saved;
++ void **store = NULL;
++ int error, i, j, shift;
++
++go_on:
++ index = root->min;
++
++ if (root->enter_node && !sradix_node_full(root, root->enter_node)) {
++ node = root->enter_node;
++ BUG_ON((index >> (root->shift * root->height)));
++ } else {
++ node = root->rnode;
++ if (node == NULL || (index >> (root->shift * root->height))
++ || sradix_node_full(root, node)) {
++ error = sradix_tree_extend(root, index);
++ if (error)
++ return error;
++
++ node = root->rnode;
++ }
++ }
++
++
++ height = node->height;
++ shift = (height - 1) * root->shift;
++ offset = (index >> shift) & root->mask;
++ while (shift > 0) {
++ offset_saved = offset;
++ for (; offset < root->stores_size; offset++) {
++ store = &node->stores[offset];
++ tmp = *store;
++
++ if (!tmp || !sradix_node_full(root, tmp))
++ break;
++ }
++ BUG_ON(offset >= root->stores_size);
++
++ if (offset != offset_saved) {
++ index += (offset - offset_saved) << shift;
++ index &= ~((1UL << shift) - 1);
++ }
++
++ if (!tmp) {
++ if (!(tmp = root->alloc()))
++ return -ENOMEM;
++
++ tmp->height = shift / root->shift;
++ *store = tmp;
++ tmp->parent = node;
++ node->count++;
++// if (root->extend)
++// root->extend(node, tmp);
++ }
++
++ node = tmp;
++ shift -= root->shift;
++ offset = (index >> shift) & root->mask;
++ }
++
++ BUG_ON(node->height != 1);
++
++
++ store = &node->stores[offset];
++ for (i = 0, j = 0;
++ j < root->stores_size - node->count &&
++ i < root->stores_size - offset && j < num; i++) {
++ if (!store[i]) {
++ store[i] = item[j];
++ if (root->assign)
++ root->assign(node, index + i, item[j]);
++ j++;
++ }
++ }
++
++ node->count += j;
++ root->num += j;
++ num -= j;
++
++ while (sradix_node_full(root, node)) {
++ node = node->parent;
++ if (!node)
++ break;
++
++ node->fulls++;
++ }
++
++ if (unlikely(!node)) {
++ /* All nodes are full */
++ root->min = 1 << (root->height * root->shift);
++ root->enter_node = NULL;
++ } else {
++ root->min = index + i - 1;
++ root->min |= (1UL << (node->height - 1)) - 1;
++ root->min++;
++ root->enter_node = node;
++ }
++
++ if (num) {
++ item += j;
++ goto go_on;
++ }
++
++ return 0;
++}
++
++
++/**
++ * sradix_tree_shrink - shrink height of a sradix tree to minimal
++ * @root sradix tree root
++ *
++ */
++static inline void sradix_tree_shrink(struct sradix_tree_root *root)
++{
++ /* try to shrink tree height */
++ while (root->height > 1) {
++ struct sradix_tree_node *to_free = root->rnode;
++
++ /*
++ * The candidate node has more than one child, or its child
++ * is not at the leftmost store, we cannot shrink.
++ */
++ if (to_free->count != 1 || !to_free->stores[0])
++ break;
++
++ root->rnode = to_free->stores[0];
++ root->rnode->parent = NULL;
++ root->height--;
++ if (unlikely(root->enter_node == to_free))
++ root->enter_node = NULL;
++ root->free(to_free);
++ }
++}
++
++/*
++ * Del the item on the known leaf node and index
++ */
++void sradix_tree_delete_from_leaf(struct sradix_tree_root *root,
++ struct sradix_tree_node *node, unsigned long index)
++{
++ unsigned int offset;
++ struct sradix_tree_node *start, *end;
++
++ BUG_ON(node->height != 1);
++
++ start = node;
++ while (node && !(--node->count))
++ node = node->parent;
++
++ end = node;
++ if (!node) {
++ root->rnode = NULL;
++ root->height = 0;
++ root->min = 0;
++ root->num = 0;
++ root->enter_node = NULL;
++ } else {
++ offset = (index >> (root->shift * (node->height - 1))) & root->mask;
++ if (root->rm)
++ root->rm(node, offset);
++ node->stores[offset] = NULL;
++ root->num--;
++ if (root->min > index) {
++ root->min = index;
++ root->enter_node = node;
++ }
++ }
++
++ if (start != end) {
++ do {
++ node = start;
++ start = start->parent;
++ if (unlikely(root->enter_node == node))
++ root->enter_node = end;
++ root->free(node);
++ } while (start != end);
++
++ /*
++ * Note that shrink may free "end", so enter_node still need to
++ * be checked inside.
++ */
++ sradix_tree_shrink(root);
++ } else if (node->count == root->stores_size - 1) {
++ /* It WAS a full leaf node. Update the ancestors */
++ node = node->parent;
++ while (node) {
++ node->fulls--;
++ if (node->fulls != root->stores_size - 1)
++ break;
++
++ node = node->parent;
++ }
++ }
++}
++
++void *sradix_tree_lookup(struct sradix_tree_root *root, unsigned long index)
++{
++ unsigned int height, offset;
++ struct sradix_tree_node *node;
++ int shift;
++
++ node = root->rnode;
++ if (node == NULL || (index >> (root->shift * root->height)))
++ return NULL;
++
++ height = root->height;
++ shift = (height - 1) * root->shift;
++
++ do {
++ offset = (index >> shift) & root->mask;
++ node = node->stores[offset];
++ if (!node)
++ return NULL;
++
++ shift -= root->shift;
++ } while (shift >= 0);
++
++ return node;
++}
++
++/*
++ * Return the item if it exists, otherwise create it in place
++ * and return the created item.
++ */
++void *sradix_tree_lookup_create(struct sradix_tree_root *root,
++ unsigned long index, void *(*item_alloc)(void))
++{
++ unsigned int height, offset;
++ struct sradix_tree_node *node, *tmp;
++ void *item;
++ int shift, error;
++
++ if (root->rnode == NULL || (index >> (root->shift * root->height))) {
++ if (item_alloc) {
++ error = sradix_tree_extend(root, index);
++ if (error)
++ return NULL;
++ } else {
++ return NULL;
++ }
++ }
++
++ node = root->rnode;
++ height = root->height;
++ shift = (height - 1) * root->shift;
++
++ do {
++ offset = (index >> shift) & root->mask;
++ if (!node->stores[offset]) {
++ if (!(tmp = root->alloc()))
++ return NULL;
++
++ tmp->height = shift / root->shift;
++ node->stores[offset] = tmp;
++ tmp->parent = node;
++ node->count++;
++ node = tmp;
++ } else {
++ node = node->stores[offset];
++ }
++
++ shift -= root->shift;
++ } while (shift > 0);
++
++ BUG_ON(node->height != 1);
++ offset = index & root->mask;
++ if (node->stores[offset]) {
++ return node->stores[offset];
++ } else if (item_alloc) {
++ if (!(item = item_alloc()))
++ return NULL;
++
++ node->stores[offset] = item;
++
++ /*
++ * NOTE: we do NOT call root->assign here, since this item is
++ * newly created by us having no meaning. Caller can call this
++ * if it's necessary to do so.
++ */
++
++ node->count++;
++ root->num++;
++
++ while (sradix_node_full(root, node)) {
++ node = node->parent;
++ if (!node)
++ break;
++
++ node->fulls++;
++ }
++
++ if (unlikely(!node)) {
++ /* All nodes are full */
++ root->min = 1 << (root->height * root->shift);
++ } else {
++ if (root->min == index) {
++ root->min |= (1UL << (node->height - 1)) - 1;
++ root->min++;
++ root->enter_node = node;
++ }
++ }
++
++ return item;
++ } else {
++ return NULL;
++ }
++
++}
++
++int sradix_tree_delete(struct sradix_tree_root *root, unsigned long index)
++{
++ unsigned int height, offset;
++ struct sradix_tree_node *node;
++ int shift;
++
++ node = root->rnode;
++ if (node == NULL || (index >> (root->shift * root->height)))
++ return -ENOENT;
++
++ height = root->height;
++ shift = (height - 1) * root->shift;
++
++ do {
++ offset = (index >> shift) & root->mask;
++ node = node->stores[offset];
++ if (!node)
++ return -ENOENT;
++
++ shift -= root->shift;
++ } while (shift > 0);
++
++ offset = index & root->mask;
++ if (!node->stores[offset])
++ return -ENOENT;
++
++ sradix_tree_delete_from_leaf(root, node, index);
++
++ return 0;
++}
+diff -Nur a/mm/Kconfig b/mm/Kconfig
+--- a/mm/Kconfig 2019-06-19 19:33:03.515534719 +0100
++++ b/mm/Kconfig 2019-06-19 19:34:58.739369890 +0100
+@@ -307,6 +307,32 @@
+ See Documentation/vm/ksm.rst for more information: KSM is inactive
+ until a program has madvised that an area is MADV_MERGEABLE, and
+ root has set /sys/kernel/mm/ksm/run to 1 (if CONFIG_SYSFS is set).
++choice
++ prompt "Choose UKSM/KSM strategy"
++ default UKSM
++ depends on KSM
++ help
++ This option allows to select a UKSM/KSM stragety.
++
++config UKSM
++ bool "Ultra-KSM for page merging"
++ depends on KSM
++ help
++ UKSM is inspired by the Linux kernel project \u2014 KSM(Kernel Same
++ page Merging), but with a fundamentally rewritten core algorithm. With
++ an advanced algorithm, UKSM now can transparently scans all anonymously
++ mapped user space applications with an significantly improved scan speed
++ and CPU efficiency. Since KVM is friendly to KSM, KVM can also benefit from
++ UKSM. Now UKSM has its first stable release and first real world enterprise user.
++ For more information, please goto its project page.
++ (www.kerneldedup.org)
++
++config KSM_LEGACY
++ bool "Legacy KSM implementation"
++ depends on KSM
++ help
++ The legacy KSM implementation from Red Hat.
++endchoice
+
+ config DEFAULT_MMAP_MIN_ADDR
+ int "Low address space to protect from user allocation"
+diff -Nur a/mm/ksm.c b/mm/ksm.c
+--- a/mm/ksm.c 2019-06-11 11:20:57.000000000 +0100
++++ b/mm/ksm.c 2019-06-19 19:34:58.739369890 +0100
+@@ -842,17 +842,6 @@
+ return err;
+ }
+
+-static inline struct stable_node *page_stable_node(struct page *page)
+-{
+- return PageKsm(page) ? page_rmapping(page) : NULL;
+-}
+-
+-static inline void set_page_stable_node(struct page *page,
+- struct stable_node *stable_node)
+-{
+- page->mapping = (void *)((unsigned long)stable_node | PAGE_MAPPING_KSM);
+-}
+-
+ #ifdef CONFIG_SYSFS
+ /*
+ * Only called through the sysfs control interface:
+diff -Nur a/mm/Makefile b/mm/Makefile
+--- a/mm/Makefile 2019-06-11 11:20:57.000000000 +0100
++++ b/mm/Makefile 2019-06-19 19:34:58.739369890 +0100
+@@ -64,7 +64,8 @@
+ obj-$(CONFIG_SPARSEMEM_VMEMMAP) += sparse-vmemmap.o
+ obj-$(CONFIG_SLOB) += slob.o
+ obj-$(CONFIG_MMU_NOTIFIER) += mmu_notifier.o
+-obj-$(CONFIG_KSM) += ksm.o
++obj-$(CONFIG_KSM_LEGACY) += ksm.o
++obj-$(CONFIG_UKSM) += uksm.o
+ obj-$(CONFIG_PAGE_POISONING) += page_poison.o
+ obj-$(CONFIG_SLAB) += slab.o
+ obj-$(CONFIG_SLUB) += slub.o
+diff -Nur a/mm/memory.c b/mm/memory.c
+--- a/mm/memory.c 2019-06-11 11:20:57.000000000 +0100
++++ b/mm/memory.c 2019-06-19 19:34:58.739369890 +0100
+@@ -128,6 +128,25 @@
+
+ unsigned long highest_memmap_pfn __read_mostly;
+
++#ifdef CONFIG_UKSM
++unsigned long uksm_zero_pfn __read_mostly;
++EXPORT_SYMBOL_GPL(uksm_zero_pfn);
++struct page *empty_uksm_zero_page;
++
++static int __init setup_uksm_zero_page(void)
++{
++ empty_uksm_zero_page = alloc_pages(__GFP_ZERO & ~__GFP_MOVABLE, 0);
++ if (!empty_uksm_zero_page)
++ panic("Oh boy, that early out of memory?");
++
++ SetPageReserved(empty_uksm_zero_page);
++ uksm_zero_pfn = page_to_pfn(empty_uksm_zero_page);
++
++ return 0;
++}
++core_initcall(setup_uksm_zero_page);
++#endif
++
+ /*
+ * CONFIG_MMU architectures set up ZERO_PAGE in their paging_init()
+ */
+@@ -139,6 +158,7 @@
+ core_initcall(init_zero_pfn);
+
+
++
+ #if defined(SPLIT_RSS_COUNTING)
+
+ void sync_mm_rss(struct mm_struct *mm)
+@@ -1040,6 +1060,9 @@
+ get_page(page);
+ page_dup_rmap(page, false);
+ rss[mm_counter(page)]++;
++
++ /* Should return NULL in vm_normal_page() */
++ uksm_bugon_zeropage(pte);
+ } else if (pte_devmap(pte)) {
+ page = pte_page(pte);
+
+@@ -1053,6 +1076,8 @@
+ page_dup_rmap(page, false);
+ rss[mm_counter(page)]++;
+ }
++ } else {
++ uksm_map_zero_page(pte);
+ }
+
+ out_set_pte:
+@@ -1322,8 +1347,10 @@
+ ptent = ptep_get_and_clear_full(mm, addr, pte,
+ tlb->fullmm);
+ tlb_remove_tlb_entry(tlb, pte, addr);
+- if (unlikely(!page))
++ if (unlikely(!page)) {
++ uksm_unmap_zero_page(ptent);
+ continue;
++ }
+
+ if (!PageAnon(page)) {
+ if (pte_dirty(ptent)) {
+@@ -2359,8 +2386,10 @@
+ clear_page(kaddr);
+ kunmap_atomic(kaddr);
+ flush_dcache_page(dst);
+- } else
++ } else {
+ copy_user_highpage(dst, src, va, vma);
++ uksm_cow_page(vma, src);
++ }
+ }
+
+ static gfp_t __get_fault_gfp_mask(struct vm_area_struct *vma)
+@@ -2509,6 +2538,7 @@
+ vmf->address);
+ if (!new_page)
+ goto oom;
++ uksm_cow_pte(vma, vmf->orig_pte);
+ } else {
+ new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma,
+ vmf->address);
+@@ -2535,7 +2565,9 @@
+ mm_counter_file(old_page));
+ inc_mm_counter_fast(mm, MM_ANONPAGES);
+ }
++ uksm_bugon_zeropage(vmf->orig_pte);
+ } else {
++ uksm_unmap_zero_page(vmf->orig_pte);
+ inc_mm_counter_fast(mm, MM_ANONPAGES);
+ }
+ flush_cache_page(vma, vmf->address, pte_pfn(vmf->orig_pte));
+diff -Nur a/mm/mmap.c b/mm/mmap.c
+--- a/mm/mmap.c 2019-06-19 19:33:03.515534719 +0100
++++ b/mm/mmap.c 2019-06-19 19:35:33.710535047 +0100
+@@ -45,6 +45,7 @@
+ #include <linux/moduleparam.h>
+ #include <linux/pkeys.h>
+ #include <linux/oom.h>
++#include <linux/ksm.h>
+ #include <linux/sched/mm.h>
+
+ #include <linux/uaccess.h>
+@@ -183,6 +184,7 @@
+ if (vma->vm_file)
+ fput(vma->vm_file);
+ mpol_put(vma_policy(vma));
++ uksm_remove_vma(vma);
+ vm_area_free(vma);
+ return next;
+ }
+@@ -709,9 +711,16 @@
+ long adjust_next = 0;
+ int remove_next = 0;
+
++/*
++ * to avoid deadlock, ksm_remove_vma must be done before any spin_lock is
++ * acquired
++ */
++ uksm_remove_vma(vma);
++
+ if (next && !insert) {
+ struct vm_area_struct *exporter = NULL, *importer = NULL;
+
++ uksm_remove_vma(next);
+ if (end >= next->vm_end) {
+ /*
+ * vma expands, overlapping all the next, and
+@@ -844,6 +853,7 @@
+ end_changed = true;
+ }
+ vma->vm_pgoff = pgoff;
++
+ if (adjust_next) {
+ next->vm_start += adjust_next << PAGE_SHIFT;
+ next->vm_pgoff += adjust_next;
+@@ -949,6 +959,7 @@
+ if (remove_next == 2) {
+ remove_next = 1;
+ end = next->vm_end;
++ uksm_remove_vma(next);
+ goto again;
+ }
+ else if (next)
+@@ -975,10 +986,14 @@
+ */
+ VM_WARN_ON(mm->highest_vm_end != vm_end_gap(vma));
+ }
++ } else {
++ if (next && !insert)
++ uksm_vma_add_new(next);
+ }
+ if (insert && file)
+ uprobe_mmap(insert);
+
++ uksm_vma_add_new(vma);
+ validate_mm(mm);
+
+ return 0;
+@@ -1435,6 +1450,9 @@
+ vm_flags |= calc_vm_prot_bits(prot, pkey) | calc_vm_flag_bits(flags) |
+ mm->def_flags | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC;
+
++ /* If uksm is enabled, we add VM_MERGEABLE to new VMAs. */
++ uksm_vm_flags_mod(&vm_flags);
++
+ if (flags & MAP_LOCKED)
+ if (!can_do_mlock())
+ return -EPERM;
+@@ -1799,6 +1817,7 @@
+ allow_write_access(file);
+ }
+ file = vma->vm_file;
++ uksm_vma_add_new(vma);
+ out:
+ perf_event_mmap(vma);
+
+@@ -1841,6 +1860,7 @@
+ if (vm_flags & VM_DENYWRITE)
+ allow_write_access(file);
+ free_vma:
++ uksm_remove_vma(vma);
+ vm_area_free(vma);
+ unacct_error:
+ if (charged)
+@@ -2663,6 +2683,8 @@
+ else
+ err = vma_adjust(vma, vma->vm_start, addr, vma->vm_pgoff, new);
+
++ uksm_vma_add_new(new);
++
+ /* Success. */
+ if (!err)
+ return 0;
+@@ -2948,6 +2970,7 @@
+ if ((flags & (~VM_EXEC)) != 0)
+ return -EINVAL;
+ flags |= VM_DATA_DEFAULT_FLAGS | VM_ACCOUNT | mm->def_flags;
++ uksm_vm_flags_mod(&flags);
+
+ error = get_unmapped_area(NULL, addr, len, 0, MAP_FIXED);
+ if (offset_in_page(error))
+@@ -3004,6 +3027,7 @@
+ vma->vm_flags = flags;
+ vma->vm_page_prot = vm_get_page_prot(flags);
+ vma_link(mm, vma, prev, rb_link, rb_parent);
++ uksm_vma_add_new(vma);
+ out:
+ perf_event_mmap(vma);
+ mm->total_vm += len >> PAGE_SHIFT;
+@@ -3081,6 +3105,12 @@
+ up_write(&mm->mmap_sem);
+ }
+
++ /*
++ * Taking write lock on mmap_sem does not harm others,
++ * but it's crucial for uksm to avoid races.
++ */
++ down_write(&mm->mmap_sem);
++
+ if (mm->locked_vm) {
+ vma = mm->mmap;
+ while (vma) {
+@@ -3115,6 +3145,11 @@
+ vma = remove_vma(vma);
+ }
+ vm_unacct_memory(nr_accounted);
++
++ mm->mmap = NULL;
++ mm->mm_rb = RB_ROOT;
++ vmacache_invalidate(mm);
++ up_write(&mm->mmap_sem);
+ }
+
+ /* Insert vm structure into process list sorted by address
+@@ -3222,6 +3257,7 @@
+ new_vma->vm_ops->open(new_vma);
+ vma_link(mm, new_vma, prev, rb_link, rb_parent);
+ *need_rmap_locks = false;
++ uksm_vma_add_new(new_vma);
+ }
+ return new_vma;
+
+@@ -3372,6 +3408,7 @@
+ vm_stat_account(mm, vma->vm_flags, len >> PAGE_SHIFT);
+
+ perf_event_mmap(vma);
++ uksm_vma_add_new(vma);
+
+ return vma;
+
+diff -Nur a/mm/rmap.c b/mm/rmap.c
+--- a/mm/rmap.c 2019-06-11 11:20:57.000000000 +0100
++++ b/mm/rmap.c 2019-06-19 19:34:58.749370222 +0100
+@@ -1017,9 +1017,9 @@
+
+ /**
+ * __page_set_anon_rmap - set up new anonymous rmap
+- * @page: Page to add to rmap
++ * @page: Page to add to rmap
+ * @vma: VM area to add page to.
+- * @address: User virtual address of the mapping
++ * @address: User virtual address of the mapping
+ * @exclusive: the page is exclusively owned by the current process
+ */
+ static void __page_set_anon_rmap(struct page *page,
+diff -Nur a/mm/uksm.c b/mm/uksm.c
+--- a/mm/uksm.c 1970-01-01 01:00:00.000000000 +0100
++++ b/mm/uksm.c 2019-06-19 19:34:58.749370222 +0100
+@@ -0,0 +1,5584 @@
++/*
++ * Ultra KSM. Copyright (C) 2011-2012 Nai Xia
++ *
++ * This is an improvement upon KSM. Some basic data structures and routines
++ * are borrowed from ksm.c .
++ *
++ * Its new features:
++ * 1. Full system scan:
++ * It automatically scans all user processes' anonymous VMAs. Kernel-user
++ * interaction to submit a memory area to KSM is no longer needed.
++ *
++ * 2. Rich area detection:
++ * It automatically detects rich areas containing abundant duplicated
++ * pages based. Rich areas are given a full scan speed. Poor areas are
++ * sampled at a reasonable speed with very low CPU consumption.
++ *
++ * 3. Ultra Per-page scan speed improvement:
++ * A new hash algorithm is proposed. As a result, on a machine with
++ * Core(TM)2 Quad Q9300 CPU in 32-bit mode and 800MHZ DDR2 main memory, it
++ * can scan memory areas that does not contain duplicated pages at speed of
++ * 627MB/sec ~ 2445MB/sec and can merge duplicated areas at speed of
++ * 477MB/sec ~ 923MB/sec.
++ *
++ * 4. Thrashing area avoidance:
++ * Thrashing area(an VMA that has frequent Ksm page break-out) can be
++ * filtered out. My benchmark shows it's more efficient than KSM's per-page
++ * hash value based volatile page detection.
++ *
++ *
++ * 5. Misc changes upon KSM:
++ * * It has a fully x86-opitmized memcmp dedicated for 4-byte-aligned page
++ * comparison. It's much faster than default C version on x86.
++ * * rmap_item now has an struct *page member to loosely cache a
++ * address-->page mapping, which reduces too much time-costly
++ * follow_page().
++ * * The VMA creation/exit procedures are hooked to let the Ultra KSM know.
++ * * try_to_merge_two_pages() now can revert a pte if it fails. No break_
++ * ksm is needed for this case.
++ *
++ * 6. Full Zero Page consideration(contributed by Figo Zhang)
++ * Now uksmd consider full zero pages as special pages and merge them to an
++ * special unswappable uksm zero page.
++ */
++
++#include <linux/errno.h>
++#include <linux/mm.h>
++#include <linux/fs.h>
++#include <linux/mman.h>
++#include <linux/sched.h>
++#include <linux/sched/mm.h>
++#include <linux/sched/coredump.h>
++#include <linux/sched/cputime.h>
++#include <linux/rwsem.h>
++#include <linux/pagemap.h>
++#include <linux/rmap.h>
++#include <linux/spinlock.h>
++#include <linux/jhash.h>
++#include <linux/delay.h>
++#include <linux/kthread.h>
++#include <linux/wait.h>
++#include <linux/slab.h>
++#include <linux/rbtree.h>
++#include <linux/memory.h>
++#include <linux/mmu_notifier.h>
++#include <linux/swap.h>
++#include <linux/ksm.h>
++#include <linux/crypto.h>
++#include <linux/scatterlist.h>
++#include <crypto/hash.h>
++#include <linux/random.h>
++#include <linux/math64.h>
++#include <linux/gcd.h>
++#include <linux/freezer.h>
++#include <linux/oom.h>
++#include <linux/numa.h>
++#include <linux/sradix-tree.h>
++
++#include <asm/tlbflush.h>
++#include "internal.h"
++
++#ifdef CONFIG_X86
++#undef memcmp
++
++#ifdef CONFIG_X86_32
++#define memcmp memcmpx86_32
++/*
++ * Compare 4-byte-aligned address s1 and s2, with length n
++ */
++int memcmpx86_32(void *s1, void *s2, size_t n)
++{
++ size_t num = n / 4;
++ register int res;
++
++ __asm__ __volatile__
++ (
++ "testl %3,%3\n\t"
++ "repe; cmpsd\n\t"
++ "je 1f\n\t"
++ "sbbl %0,%0\n\t"
++ "orl $1,%0\n"
++ "1:"
++ : "=&a" (res), "+&S" (s1), "+&D" (s2), "+&c" (num)
++ : "0" (0)
++ : "cc");
++
++ return res;
++}
++
++/*
++ * Check the page is all zero ?
++ */
++static int is_full_zero(const void *s1, size_t len)
++{
++ unsigned char same;
++
++ len /= 4;
++
++ __asm__ __volatile__
++ ("repe; scasl;"
++ "sete %0"
++ : "=qm" (same), "+D" (s1), "+c" (len)
++ : "a" (0)
++ : "cc");
++
++ return same;
++}
++
++
++#elif defined(CONFIG_X86_64)
++#define memcmp memcmpx86_64
++/*
++ * Compare 8-byte-aligned address s1 and s2, with length n
++ */
++int memcmpx86_64(void *s1, void *s2, size_t n)
++{
++ size_t num = n / 8;
++ register int res;
++
++ __asm__ __volatile__
++ (
++ "testq %q3,%q3\n\t"
++ "repe; cmpsq\n\t"
++ "je 1f\n\t"
++ "sbbq %q0,%q0\n\t"
++ "orq $1,%q0\n"
++ "1:"
++ : "=&a" (res), "+&S" (s1), "+&D" (s2), "+&c" (num)
++ : "0" (0)
++ : "cc");
++
++ return res;
++}
++
++static int is_full_zero(const void *s1, size_t len)
++{
++ unsigned char same;
++
++ len /= 8;
++
++ __asm__ __volatile__
++ ("repe; scasq;"
++ "sete %0"
++ : "=qm" (same), "+D" (s1), "+c" (len)
++ : "a" (0)
++ : "cc");
++
++ return same;
++}
++
++#endif
++#else
++static int is_full_zero(const void *s1, size_t len)
++{
++ unsigned long *src = s1;
++ int i;
++
++ len /= sizeof(*src);
++
++ for (i = 0; i < len; i++) {
++ if (src[i])
++ return 0;
++ }
++
++ return 1;
++}
++#endif
++
++#define UKSM_RUNG_ROUND_FINISHED (1 << 0)
++#define TIME_RATIO_SCALE 10000
++
++#define SLOT_TREE_NODE_SHIFT 8
++#define SLOT_TREE_NODE_STORE_SIZE (1UL << SLOT_TREE_NODE_SHIFT)
++struct slot_tree_node {
++ unsigned long size;
++ struct sradix_tree_node snode;
++ void *stores[SLOT_TREE_NODE_STORE_SIZE];
++};
++
++static struct kmem_cache *slot_tree_node_cachep;
++
++static struct sradix_tree_node *slot_tree_node_alloc(void)
++{
++ struct slot_tree_node *p;
++
++ p = kmem_cache_zalloc(slot_tree_node_cachep, GFP_KERNEL |
++ __GFP_NORETRY | __GFP_NOWARN);
++ if (!p)
++ return NULL;
++
++ return &p->snode;
++}
++
++static void slot_tree_node_free(struct sradix_tree_node *node)
++{
++ struct slot_tree_node *p;
++
++ p = container_of(node, struct slot_tree_node, snode);
++ kmem_cache_free(slot_tree_node_cachep, p);
++}
++
++static void slot_tree_node_extend(struct sradix_tree_node *parent,
++ struct sradix_tree_node *child)
++{
++ struct slot_tree_node *p, *c;
++
++ p = container_of(parent, struct slot_tree_node, snode);
++ c = container_of(child, struct slot_tree_node, snode);
++
++ p->size += c->size;
++}
++
++void slot_tree_node_assign(struct sradix_tree_node *node,
++ unsigned int index, void *item)
++{
++ struct vma_slot *slot = item;
++ struct slot_tree_node *cur;
++
++ slot->snode = node;
++ slot->sindex = index;
++
++ while (node) {
++ cur = container_of(node, struct slot_tree_node, snode);
++ cur->size += slot->pages;
++ node = node->parent;
++ }
++}
++
++void slot_tree_node_rm(struct sradix_tree_node *node, unsigned int offset)
++{
++ struct vma_slot *slot;
++ struct slot_tree_node *cur;
++ unsigned long pages;
++
++ if (node->height == 1) {
++ slot = node->stores[offset];
++ pages = slot->pages;
++ } else {
++ cur = container_of(node->stores[offset],
++ struct slot_tree_node, snode);
++ pages = cur->size;
++ }
++
++ while (node) {
++ cur = container_of(node, struct slot_tree_node, snode);
++ cur->size -= pages;
++ node = node->parent;
++ }
++}
++
++unsigned long slot_iter_index;
++int slot_iter(void *item, unsigned long height)
++{
++ struct slot_tree_node *node;
++ struct vma_slot *slot;
++
++ if (height == 1) {
++ slot = item;
++ if (slot_iter_index < slot->pages) {
++ /*in this one*/
++ return 1;
++ } else {
++ slot_iter_index -= slot->pages;
++ return 0;
++ }
++
++ } else {
++ node = container_of(item, struct slot_tree_node, snode);
++ if (slot_iter_index < node->size) {
++ /*in this one*/
++ return 1;
++ } else {
++ slot_iter_index -= node->size;
++ return 0;
++ }
++ }
++}
++
++
++static inline void slot_tree_init_root(struct sradix_tree_root *root)
++{
++ init_sradix_tree_root(root, SLOT_TREE_NODE_SHIFT);
++ root->alloc = slot_tree_node_alloc;
++ root->free = slot_tree_node_free;
++ root->extend = slot_tree_node_extend;
++ root->assign = slot_tree_node_assign;
++ root->rm = slot_tree_node_rm;
++}
++
++void slot_tree_init(void)
++{
++ slot_tree_node_cachep = kmem_cache_create("slot_tree_node",
++ sizeof(struct slot_tree_node), 0,
++ SLAB_PANIC | SLAB_RECLAIM_ACCOUNT,
++ NULL);
++}
++
++
++/* Each rung of this ladder is a list of VMAs having a same scan ratio */
++struct scan_rung {
++ //struct list_head scanned_list;
++ struct sradix_tree_root vma_root;
++ struct sradix_tree_root vma_root2;
++
++ struct vma_slot *current_scan;
++ unsigned long current_offset;
++
++ /*
++ * The initial value for current_offset, it should loop over
++ * [0~ step - 1] to let all slot have its chance to be scanned.
++ */
++ unsigned long offset_init;
++ unsigned long step; /* dynamic step for current_offset */
++ unsigned int flags;
++ unsigned long pages_to_scan;
++ //unsigned long fully_scanned_slots;
++ /*
++ * a little bit tricky - if cpu_time_ratio > 0, then the value is the
++ * the cpu time ratio it can spend in rung_i for every scan
++ * period. if < 0, then it is the cpu time ratio relative to the
++ * max cpu percentage user specified. Both in unit of
++ * 1/TIME_RATIO_SCALE
++ */
++ int cpu_ratio;
++
++ /*
++ * How long it will take for all slots in this rung to be fully
++ * scanned? If it's zero, we don't care about the cover time:
++ * it's fully scanned.
++ */
++ unsigned int cover_msecs;
++ //unsigned long vma_num;
++ //unsigned long pages; /* Sum of all slot's pages in rung */
++};
++
++/**
++ * node of either the stable or unstale rbtree
++ *
++ */
++struct tree_node {
++ struct rb_node node; /* link in the main (un)stable rbtree */
++ struct rb_root sub_root; /* rb_root for sublevel collision rbtree */
++ u32 hash;
++ unsigned long count; /* TODO: merged with sub_root */
++ struct list_head all_list; /* all tree nodes in stable/unstable tree */
++};
++
++/**
++ * struct stable_node - node of the stable rbtree
++ * @node: rb node of this ksm page in the stable tree
++ * @hlist: hlist head of rmap_items using this ksm page
++ * @kpfn: page frame number of this ksm page
++ */
++struct stable_node {
++ struct rb_node node; /* link in sub-rbtree */
++ struct tree_node *tree_node; /* it's tree node root in stable tree, NULL if it's in hell list */
++ struct hlist_head hlist;
++ unsigned long kpfn;
++ u32 hash_max; /* if ==0 then it's not been calculated yet */
++ struct list_head all_list; /* in a list for all stable nodes */
++};
++
++/**
++ * struct node_vma - group rmap_items linked in a same stable
++ * node together.
++ */
++struct node_vma {
++ union {
++ struct vma_slot *slot;
++ unsigned long key; /* slot is used as key sorted on hlist */
++ };
++ struct hlist_node hlist;
++ struct hlist_head rmap_hlist;
++ struct stable_node *head;
++};
++
++/**
++ * struct rmap_item - reverse mapping item for virtual addresses
++ * @rmap_list: next rmap_item in mm_slot's singly-linked rmap_list
++ * @anon_vma: pointer to anon_vma for this mm,address, when in stable tree
++ * @mm: the memory structure this rmap_item is pointing into
++ * @address: the virtual address this rmap_item tracks (+ flags in low bits)
++ * @node: rb node of this rmap_item in the unstable tree
++ * @head: pointer to stable_node heading this list in the stable tree
++ * @hlist: link into hlist of rmap_items hanging off that stable_node
++ */
++struct rmap_item {
++ struct vma_slot *slot;
++ struct page *page;
++ unsigned long address; /* + low bits used for flags below */
++ unsigned long hash_round;
++ unsigned long entry_index;
++ union {
++ struct {/* when in unstable tree */
++ struct rb_node node;
++ struct tree_node *tree_node;
++ u32 hash_max;
++ };
++ struct { /* when in stable tree */
++ struct node_vma *head;
++ struct hlist_node hlist;
++ struct anon_vma *anon_vma;
++ };
++ };
++} __aligned(4);
++
++struct rmap_list_entry {
++ union {
++ struct rmap_item *item;
++ unsigned long addr;
++ };
++ /* lowest bit is used for is_addr tag */
++} __aligned(4); /* 4 aligned to fit in to pages*/
++
++
++/* Basic data structure definition ends */
++
++
++/*
++ * Flags for rmap_item to judge if it's listed in the stable/unstable tree.
++ * The flags use the low bits of rmap_item.address
++ */
++#define UNSTABLE_FLAG 0x1
++#define STABLE_FLAG 0x2
++#define get_rmap_addr(x) ((x)->address & PAGE_MASK)
++
++/*
++ * rmap_list_entry helpers
++ */
++#define IS_ADDR_FLAG 1
++#define is_addr(ptr) ((unsigned long)(ptr) & IS_ADDR_FLAG)
++#define set_is_addr(ptr) ((ptr) |= IS_ADDR_FLAG)
++#define get_clean_addr(ptr) (((ptr) & ~(__typeof__(ptr))IS_ADDR_FLAG))
++
++
++/*
++ * High speed caches for frequently allocated and freed structs
++ */
++static struct kmem_cache *rmap_item_cache;
++static struct kmem_cache *stable_node_cache;
++static struct kmem_cache *node_vma_cache;
++static struct kmem_cache *vma_slot_cache;
++static struct kmem_cache *tree_node_cache;
++#define UKSM_KMEM_CACHE(__struct, __flags) kmem_cache_create("uksm_"#__struct,\
++ sizeof(struct __struct), __alignof__(struct __struct),\
++ (__flags), NULL)
++
++/* Array of all scan_rung, uksm_scan_ladder[0] having the minimum scan ratio */
++#define SCAN_LADDER_SIZE 4
++static struct scan_rung uksm_scan_ladder[SCAN_LADDER_SIZE];
++
++/* The evaluation rounds uksmd has finished */
++static unsigned long long uksm_eval_round = 1;
++
++/*
++ * we add 1 to this var when we consider we should rebuild the whole
++ * unstable tree.
++ */
++static unsigned long uksm_hash_round = 1;
++
++/*
++ * How many times the whole memory is scanned.
++ */
++static unsigned long long fully_scanned_round = 1;
++
++/* The total number of virtual pages of all vma slots */
++static u64 uksm_pages_total;
++
++/* The number of pages has been scanned since the start up */
++static u64 uksm_pages_scanned;
++
++static u64 scanned_virtual_pages;
++
++/* The number of pages has been scanned since last encode_benefit call */
++static u64 uksm_pages_scanned_last;
++
++/* If the scanned number is tooo large, we encode it here */
++static u64 pages_scanned_stored;
++
++static unsigned long pages_scanned_base;
++
++/* The number of nodes in the stable tree */
++static unsigned long uksm_pages_shared;
++
++/* The number of page slots additionally sharing those nodes */
++static unsigned long uksm_pages_sharing;
++
++/* The number of nodes in the unstable tree */
++static unsigned long uksm_pages_unshared;
++
++/*
++ * Milliseconds ksmd should sleep between scans,
++ * >= 100ms to be consistent with
++ * scan_time_to_sleep_msec()
++ */
++static unsigned int uksm_sleep_jiffies;
++
++/* The real value for the uksmd next sleep */
++static unsigned int uksm_sleep_real;
++
++/* Saved value for user input uksm_sleep_jiffies when it's enlarged */
++static unsigned int uksm_sleep_saved;
++
++/* Max percentage of cpu utilization ksmd can take to scan in one batch */
++static unsigned int uksm_max_cpu_percentage;
++
++static int uksm_cpu_governor;
++
++static char *uksm_cpu_governor_str[4] = { "full", "medium", "low", "quiet" };
++
++struct uksm_cpu_preset_s {
++ int cpu_ratio[SCAN_LADDER_SIZE];
++ unsigned int cover_msecs[SCAN_LADDER_SIZE];
++ unsigned int max_cpu; /* percentage */
++};
++
++struct uksm_cpu_preset_s uksm_cpu_preset[4] = {
++ { {20, 40, -2500, -10000}, {1000, 500, 200, 50}, 95},
++ { {20, 30, -2500, -10000}, {1000, 500, 400, 100}, 50},
++ { {10, 20, -5000, -10000}, {1500, 1000, 1000, 250}, 20},
++ { {10, 20, 40, 75}, {2000, 1000, 1000, 1000}, 1},
++};
++
++/* The default value for uksm_ema_page_time if it's not initialized */
++#define UKSM_PAGE_TIME_DEFAULT 500
++
++/*cost to scan one page by expotional moving average in nsecs */
++static unsigned long uksm_ema_page_time = UKSM_PAGE_TIME_DEFAULT;
++
++/* The expotional moving average alpha weight, in percentage. */
++#define EMA_ALPHA 20
++
++/*
++ * The threshold used to filter out thrashing areas,
++ * If it == 0, filtering is disabled, otherwise it's the percentage up-bound
++ * of the thrashing ratio of all areas. Any area with a bigger thrashing ratio
++ * will be considered as having a zero duplication ratio.
++ */
++static unsigned int uksm_thrash_threshold = 50;
++
++/* How much dedup ratio is considered to be abundant*/
++static unsigned int uksm_abundant_threshold = 10;
++
++/* All slots having merged pages in this eval round. */
++struct list_head vma_slot_dedup = LIST_HEAD_INIT(vma_slot_dedup);
++
++/* How many times the ksmd has slept since startup */
++static unsigned long long uksm_sleep_times;
++
++#define UKSM_RUN_STOP 0
++#define UKSM_RUN_MERGE 1
++static unsigned int uksm_run = 1;
++
++static DECLARE_WAIT_QUEUE_HEAD(uksm_thread_wait);
++static DEFINE_MUTEX(uksm_thread_mutex);
++
++/*
++ * List vma_slot_new is for newly created vma_slot waiting to be added by
++ * ksmd. If one cannot be added(e.g. due to it's too small), it's moved to
++ * vma_slot_noadd. vma_slot_del is the list for vma_slot whose corresponding
++ * VMA has been removed/freed.
++ */
++struct list_head vma_slot_new = LIST_HEAD_INIT(vma_slot_new);
++struct list_head vma_slot_noadd = LIST_HEAD_INIT(vma_slot_noadd);
++struct list_head vma_slot_del = LIST_HEAD_INIT(vma_slot_del);
++static DEFINE_SPINLOCK(vma_slot_list_lock);
++
++/* The unstable tree heads */
++static struct rb_root root_unstable_tree = RB_ROOT;
++
++/*
++ * All tree_nodes are in a list to be freed at once when unstable tree is
++ * freed after each scan round.
++ */
++static struct list_head unstable_tree_node_list =
++ LIST_HEAD_INIT(unstable_tree_node_list);
++
++/* List contains all stable nodes */
++static struct list_head stable_node_list = LIST_HEAD_INIT(stable_node_list);
++
++/*
++ * When the hash strength is changed, the stable tree must be delta_hashed and
++ * re-structured. We use two set of below structs to speed up the
++ * re-structuring of stable tree.
++ */
++static struct list_head
++stable_tree_node_list[2] = {LIST_HEAD_INIT(stable_tree_node_list[0]),
++ LIST_HEAD_INIT(stable_tree_node_list[1])};
++
++static struct list_head *stable_tree_node_listp = &stable_tree_node_list[0];
++static struct rb_root root_stable_tree[2] = {RB_ROOT, RB_ROOT};
++static struct rb_root *root_stable_treep = &root_stable_tree[0];
++static unsigned long stable_tree_index;
++
++/* The hash strength needed to hash a full page */
++#define HASH_STRENGTH_FULL (PAGE_SIZE / sizeof(u32))
++
++/* The hash strength needed for loop-back hashing */
++#define HASH_STRENGTH_MAX (HASH_STRENGTH_FULL + 10)
++
++/* The random offsets in a page */
++static u32 *random_nums;
++
++/* The hash strength */
++static unsigned long hash_strength = HASH_STRENGTH_FULL >> 4;
++
++/* The delta value each time the hash strength increases or decreases */
++static unsigned long hash_strength_delta;
++#define HASH_STRENGTH_DELTA_MAX 5
++
++/* The time we have saved due to random_sample_hash */
++static u64 rshash_pos;
++
++/* The time we have wasted due to hash collision */
++static u64 rshash_neg;
++
++struct uksm_benefit {
++ u64 pos;
++ u64 neg;
++ u64 scanned;
++ unsigned long base;
++} benefit;
++
++/*
++ * The relative cost of memcmp, compared to 1 time unit of random sample
++ * hash, this value is tested when ksm module is initialized
++ */
++static unsigned long memcmp_cost;
++
++static unsigned long rshash_neg_cont_zero;
++static unsigned long rshash_cont_obscure;
++
++/* The possible states of hash strength adjustment heuristic */
++enum rshash_states {
++ RSHASH_STILL,
++ RSHASH_TRYUP,
++ RSHASH_TRYDOWN,
++ RSHASH_NEW,
++ RSHASH_PRE_STILL,
++};
++
++/* The possible direction we are about to adjust hash strength */
++enum rshash_direct {
++ GO_UP,
++ GO_DOWN,
++ OBSCURE,
++ STILL,
++};
++
++/* random sampling hash state machine */
++static struct {
++ enum rshash_states state;
++ enum rshash_direct pre_direct;
++ u8 below_count;
++ /* Keep a lookup window of size 5, iff above_count/below_count > 3
++ * in this window we stop trying.
++ */
++ u8 lookup_window_index;
++ u64 stable_benefit;
++ unsigned long turn_point_down;
++ unsigned long turn_benefit_down;
++ unsigned long turn_point_up;
++ unsigned long turn_benefit_up;
++ unsigned long stable_point;
++} rshash_state;
++
++/*zero page hash table, hash_strength [0 ~ HASH_STRENGTH_MAX]*/
++static u32 *zero_hash_table;
++
++static inline struct node_vma *alloc_node_vma(void)
++{
++ struct node_vma *node_vma;
++
++ node_vma = kmem_cache_zalloc(node_vma_cache, GFP_KERNEL |
++ __GFP_NORETRY | __GFP_NOWARN);
++ if (node_vma) {
++ INIT_HLIST_HEAD(&node_vma->rmap_hlist);
++ INIT_HLIST_NODE(&node_vma->hlist);
++ }
++ return node_vma;
++}
++
++static inline void free_node_vma(struct node_vma *node_vma)
++{
++ kmem_cache_free(node_vma_cache, node_vma);
++}
++
++
++static inline struct vma_slot *alloc_vma_slot(void)
++{
++ struct vma_slot *slot;
++
++ /*
++ * In case ksm is not initialized by now.
++ * Oops, we need to consider the call site of uksm_init() in the future.
++ */
++ if (!vma_slot_cache)
++ return NULL;
++
++ slot = kmem_cache_zalloc(vma_slot_cache, GFP_KERNEL |
++ __GFP_NORETRY | __GFP_NOWARN);
++ if (slot) {
++ INIT_LIST_HEAD(&slot->slot_list);
++ INIT_LIST_HEAD(&slot->dedup_list);
++ slot->flags |= UKSM_SLOT_NEED_RERAND;
++ }
++ return slot;
++}
++
++static inline void free_vma_slot(struct vma_slot *vma_slot)
++{
++ kmem_cache_free(vma_slot_cache, vma_slot);
++}
++
++
++
++static inline struct rmap_item *alloc_rmap_item(void)
++{
++ struct rmap_item *rmap_item;
++
++ rmap_item = kmem_cache_zalloc(rmap_item_cache, GFP_KERNEL |
++ __GFP_NORETRY | __GFP_NOWARN);
++ if (rmap_item) {
++ /* bug on lowest bit is not clear for flag use */
++ BUG_ON(is_addr(rmap_item));
++ }
++ return rmap_item;
++}
++
++static inline void free_rmap_item(struct rmap_item *rmap_item)
++{
++ rmap_item->slot = NULL; /* debug safety */
++ kmem_cache_free(rmap_item_cache, rmap_item);
++}
++
++static inline struct stable_node *alloc_stable_node(void)
++{
++ struct stable_node *node;
++
++ node = kmem_cache_alloc(stable_node_cache, GFP_KERNEL |
++ __GFP_NORETRY | __GFP_NOWARN);
++ if (!node)
++ return NULL;
++
++ INIT_HLIST_HEAD(&node->hlist);
++ list_add(&node->all_list, &stable_node_list);
++ return node;
++}
++
++static inline void free_stable_node(struct stable_node *stable_node)
++{
++ list_del(&stable_node->all_list);
++ kmem_cache_free(stable_node_cache, stable_node);
++}
++
++static inline struct tree_node *alloc_tree_node(struct list_head *list)
++{
++ struct tree_node *node;
++
++ node = kmem_cache_zalloc(tree_node_cache, GFP_KERNEL |
++ __GFP_NORETRY | __GFP_NOWARN);
++ if (!node)
++ return NULL;
++
++ list_add(&node->all_list, list);
++ return node;
++}
++
++static inline void free_tree_node(struct tree_node *node)
++{
++ list_del(&node->all_list);
++ kmem_cache_free(tree_node_cache, node);
++}
++
++static void uksm_drop_anon_vma(struct rmap_item *rmap_item)
++{
++ struct anon_vma *anon_vma = rmap_item->anon_vma;
++
++ put_anon_vma(anon_vma);
++}
++
++
++/**
++ * Remove a stable node from stable_tree, may unlink from its tree_node and
++ * may remove its parent tree_node if no other stable node is pending.
++ *
++ * @stable_node The node need to be removed
++ * @unlink_rb Will this node be unlinked from the rbtree?
++ * @remove_tree_ node Will its tree_node be removed if empty?
++ */
++static void remove_node_from_stable_tree(struct stable_node *stable_node,
++ int unlink_rb, int remove_tree_node)
++{
++ struct node_vma *node_vma;
++ struct rmap_item *rmap_item;
++ struct hlist_node *n;
++
++ if (!hlist_empty(&stable_node->hlist)) {
++ hlist_for_each_entry_safe(node_vma, n,
++ &stable_node->hlist, hlist) {
++ hlist_for_each_entry(rmap_item, &node_vma->rmap_hlist, hlist) {
++ uksm_pages_sharing--;
++
++ uksm_drop_anon_vma(rmap_item);
++ rmap_item->address &= PAGE_MASK;
++ }
++ free_node_vma(node_vma);
++ cond_resched();
++ }
++
++ /* the last one is counted as shared */
++ uksm_pages_shared--;
++ uksm_pages_sharing++;
++ }
++
++ if (stable_node->tree_node && unlink_rb) {
++ rb_erase(&stable_node->node,
++ &stable_node->tree_node->sub_root);
++
++ if (RB_EMPTY_ROOT(&stable_node->tree_node->sub_root) &&
++ remove_tree_node) {
++ rb_erase(&stable_node->tree_node->node,
++ root_stable_treep);
++ free_tree_node(stable_node->tree_node);
++ } else {
++ stable_node->tree_node->count--;
++ }
++ }
++
++ free_stable_node(stable_node);
++}
++
++
++/*
++ * get_uksm_page: checks if the page indicated by the stable node
++ * is still its ksm page, despite having held no reference to it.
++ * In which case we can trust the content of the page, and it
++ * returns the gotten page; but if the page has now been zapped,
++ * remove the stale node from the stable tree and return NULL.
++ *
++ * You would expect the stable_node to hold a reference to the ksm page.
++ * But if it increments the page's count, swapping out has to wait for
++ * ksmd to come around again before it can free the page, which may take
++ * seconds or even minutes: much too unresponsive. So instead we use a
++ * "keyhole reference": access to the ksm page from the stable node peeps
++ * out through its keyhole to see if that page still holds the right key,
++ * pointing back to this stable node. This relies on freeing a PageAnon
++ * page to reset its page->mapping to NULL, and relies on no other use of
++ * a page to put something that might look like our key in page->mapping.
++ *
++ * include/linux/pagemap.h page_cache_get_speculative() is a good reference,
++ * but this is different - made simpler by uksm_thread_mutex being held, but
++ * interesting for assuming that no other use of the struct page could ever
++ * put our expected_mapping into page->mapping (or a field of the union which
++ * coincides with page->mapping). The RCU calls are not for KSM at all, but
++ * to keep the page_count protocol described with page_cache_get_speculative.
++ *
++ * Note: it is possible that get_uksm_page() will return NULL one moment,
++ * then page the next, if the page is in between page_freeze_refs() and
++ * page_unfreeze_refs(): this shouldn't be a problem anywhere, the page
++ * is on its way to being freed; but it is an anomaly to bear in mind.
++ *
++ * @unlink_rb: if the removal of this node will firstly unlink from
++ * its rbtree. stable_node_reinsert will prevent this when restructuring the
++ * node from its old tree.
++ *
++ * @remove_tree_node: if this is the last one of its tree_node, will the
++ * tree_node be freed ? If we are inserting stable node, this tree_node may
++ * be reused, so don't free it.
++ */
++static struct page *get_uksm_page(struct stable_node *stable_node,
++ int unlink_rb, int remove_tree_node)
++{
++ struct page *page;
++ void *expected_mapping;
++ unsigned long kpfn;
++
++ expected_mapping = (void *)((unsigned long)stable_node |
++ PAGE_MAPPING_KSM);
++again:
++ kpfn = READ_ONCE(stable_node->kpfn);
++ page = pfn_to_page(kpfn);
++
++ /*
++ * page is computed from kpfn, so on most architectures reading
++ * page->mapping is naturally ordered after reading node->kpfn,
++ * but on Alpha we need to be more careful.
++ */
++ smp_read_barrier_depends();
++
++ if (READ_ONCE(page->mapping) != expected_mapping)
++ goto stale;
++
++ /*
++ * We cannot do anything with the page while its refcount is 0.
++ * Usually 0 means free, or tail of a higher-order page: in which
++ * case this node is no longer referenced, and should be freed;
++ * however, it might mean that the page is under page_freeze_refs().
++ * The __remove_mapping() case is easy, again the node is now stale;
++ * but if page is swapcache in migrate_page_move_mapping(), it might
++ * still be our page, in which case it's essential to keep the node.
++ */
++ while (!get_page_unless_zero(page)) {
++ /*
++ * Another check for page->mapping != expected_mapping would
++ * work here too. We have chosen the !PageSwapCache test to
++ * optimize the common case, when the page is or is about to
++ * be freed: PageSwapCache is cleared (under spin_lock_irq)
++ * in the freeze_refs section of __remove_mapping(); but Anon
++ * page->mapping reset to NULL later, in free_pages_prepare().
++ */
++ if (!PageSwapCache(page))
++ goto stale;
++ cpu_relax();
++ }
++
++ if (READ_ONCE(page->mapping) != expected_mapping) {
++ put_page(page);
++ goto stale;
++ }
++
++ lock_page(page);
++ if (READ_ONCE(page->mapping) != expected_mapping) {
++ unlock_page(page);
++ put_page(page);
++ goto stale;
++ }
++ unlock_page(page);
++ return page;
++stale:
++ /*
++ * We come here from above when page->mapping or !PageSwapCache
++ * suggests that the node is stale; but it might be under migration.
++ * We need smp_rmb(), matching the smp_wmb() in ksm_migrate_page(),
++ * before checking whether node->kpfn has been changed.
++ */
++ smp_rmb();
++ if (stable_node->kpfn != kpfn)
++ goto again;
++
++ remove_node_from_stable_tree(stable_node, unlink_rb, remove_tree_node);
++
++ return NULL;
++}
++
++/*
++ * Removing rmap_item from stable or unstable tree.
++ * This function will clean the information from the stable/unstable tree.
++ */
++static inline void remove_rmap_item_from_tree(struct rmap_item *rmap_item)
++{
++ if (rmap_item->address & STABLE_FLAG) {
++ struct stable_node *stable_node;
++ struct node_vma *node_vma;
++ struct page *page;
++
++ node_vma = rmap_item->head;
++ stable_node = node_vma->head;
++ page = get_uksm_page(stable_node, 1, 1);
++ if (!page)
++ goto out;
++
++ /*
++ * page lock is needed because it's racing with
++ * try_to_unmap_ksm(), etc.
++ */
++ lock_page(page);
++ hlist_del(&rmap_item->hlist);
++
++ if (hlist_empty(&node_vma->rmap_hlist)) {
++ hlist_del(&node_vma->hlist);
++ free_node_vma(node_vma);
++ }
++ unlock_page(page);
++
++ put_page(page);
++ if (hlist_empty(&stable_node->hlist)) {
++ /* do NOT call remove_node_from_stable_tree() here,
++ * it's possible for a forked rmap_item not in
++ * stable tree while the in-tree rmap_items were
++ * deleted.
++ */
++ uksm_pages_shared--;
++ } else
++ uksm_pages_sharing--;
++
++
++ uksm_drop_anon_vma(rmap_item);
++ } else if (rmap_item->address & UNSTABLE_FLAG) {
++ if (rmap_item->hash_round == uksm_hash_round) {
++
++ rb_erase(&rmap_item->node,
++ &rmap_item->tree_node->sub_root);
++ if (RB_EMPTY_ROOT(&rmap_item->tree_node->sub_root)) {
++ rb_erase(&rmap_item->tree_node->node,
++ &root_unstable_tree);
++
++ free_tree_node(rmap_item->tree_node);
++ } else
++ rmap_item->tree_node->count--;
++ }
++ uksm_pages_unshared--;
++ }
++
++ rmap_item->address &= PAGE_MASK;
++ rmap_item->hash_max = 0;
++
++out:
++ cond_resched(); /* we're called from many long loops */
++}
++
++static inline int slot_in_uksm(struct vma_slot *slot)
++{
++ return list_empty(&slot->slot_list);
++}
++
++/*
++ * Test if the mm is exiting
++ */
++static inline bool uksm_test_exit(struct mm_struct *mm)
++{
++ return atomic_read(&mm->mm_users) == 0;
++}
++
++static inline unsigned long vma_pool_size(struct vma_slot *slot)
++{
++ return round_up(sizeof(struct rmap_list_entry) * slot->pages,
++ PAGE_SIZE) >> PAGE_SHIFT;
++}
++
++#define CAN_OVERFLOW_U64(x, delta) (U64_MAX - (x) < (delta))
++
++/* must be done with sem locked */
++static int slot_pool_alloc(struct vma_slot *slot)
++{
++ unsigned long pool_size;
++
++ if (slot->rmap_list_pool)
++ return 0;
++
++ pool_size = vma_pool_size(slot);
++ slot->rmap_list_pool = kcalloc(pool_size, sizeof(struct page *),
++ GFP_KERNEL);
++ if (!slot->rmap_list_pool)
++ return -ENOMEM;
++
++ slot->pool_counts = kcalloc(pool_size, sizeof(unsigned int),
++ GFP_KERNEL);
++ if (!slot->pool_counts) {
++ kfree(slot->rmap_list_pool);
++ return -ENOMEM;
++ }
++
++ slot->pool_size = pool_size;
++ BUG_ON(CAN_OVERFLOW_U64(uksm_pages_total, slot->pages));
++ slot->flags |= UKSM_SLOT_IN_UKSM;
++ uksm_pages_total += slot->pages;
++
++ return 0;
++}
++
++/*
++ * Called after vma is unlinked from its mm
++ */
++void uksm_remove_vma(struct vm_area_struct *vma)
++{
++ struct vma_slot *slot;
++
++ if (!vma->uksm_vma_slot)
++ return;
++
++ spin_lock(&vma_slot_list_lock);
++ slot = vma->uksm_vma_slot;
++ if (!slot)
++ goto out;
++
++ if (slot_in_uksm(slot)) {
++ /**
++ * This slot has been added by ksmd, so move to the del list
++ * waiting ksmd to free it.
++ */
++ list_add_tail(&slot->slot_list, &vma_slot_del);
++ } else {
++ /**
++ * It's still on new list. It's ok to free slot directly.
++ */
++ list_del(&slot->slot_list);
++ free_vma_slot(slot);
++ }
++out:
++ vma->uksm_vma_slot = NULL;
++ spin_unlock(&vma_slot_list_lock);
++}
++
++/**
++ * Need to do two things:
++ * 1. check if slot was moved to del list
++ * 2. make sure the mmap_sem is manipulated under valid vma.
++ *
++ * My concern here is that in some cases, this may make
++ * vma_slot_list_lock() waiters to serialized further by some
++ * sem->wait_lock, can this really be expensive?
++ *
++ *
++ * @return
++ * 0: if successfully locked mmap_sem
++ * -ENOENT: this slot was moved to del list
++ * -EBUSY: vma lock failed
++ */
++static int try_down_read_slot_mmap_sem(struct vma_slot *slot)
++{
++ struct vm_area_struct *vma;
++ struct mm_struct *mm;
++ struct rw_semaphore *sem;
++
++ spin_lock(&vma_slot_list_lock);
++
++ /* the slot_list was removed and inited from new list, when it enters
++ * uksm_list. If now it's not empty, then it must be moved to del list
++ */
++ if (!slot_in_uksm(slot)) {
++ spin_unlock(&vma_slot_list_lock);
++ return -ENOENT;
++ }
++
++ BUG_ON(slot->pages != vma_pages(slot->vma));
++ /* Ok, vma still valid */
++ vma = slot->vma;
++ mm = vma->vm_mm;
++ sem = &mm->mmap_sem;
++
++ if (uksm_test_exit(mm)) {
++ spin_unlock(&vma_slot_list_lock);
++ return -ENOENT;
++ }
++
++ if (down_read_trylock(sem)) {
++ spin_unlock(&vma_slot_list_lock);
++ if (slot_pool_alloc(slot)) {
++ uksm_remove_vma(vma);
++ up_read(sem);
++ return -ENOENT;
++ }
++ return 0;
++ }
++
++ spin_unlock(&vma_slot_list_lock);
++ return -EBUSY;
++}
++
++static inline unsigned long
++vma_page_address(struct page *page, struct vm_area_struct *vma)
++{
++ pgoff_t pgoff = page->index;
++ unsigned long address;
++
++ address = vma->vm_start + ((pgoff - vma->vm_pgoff) << PAGE_SHIFT);
++ if (unlikely(address < vma->vm_start || address >= vma->vm_end)) {
++ /* page should be within @vma mapping range */
++ return -EFAULT;
++ }
++ return address;
++}
++
++
++/* return 0 on success with the item's mmap_sem locked */
++static inline int get_mergeable_page_lock_mmap(struct rmap_item *item)
++{
++ struct mm_struct *mm;
++ struct vma_slot *slot = item->slot;
++ int err = -EINVAL;
++
++ struct page *page;
++
++ /*
++ * try_down_read_slot_mmap_sem() returns non-zero if the slot
++ * has been removed by uksm_remove_vma().
++ */
++ if (try_down_read_slot_mmap_sem(slot))
++ return -EBUSY;
++
++ mm = slot->vma->vm_mm;
++
++ if (uksm_test_exit(mm))
++ goto failout_up;
++
++ page = item->page;
++ rcu_read_lock();
++ if (!get_page_unless_zero(page)) {
++ rcu_read_unlock();
++ goto failout_up;
++ }
++
++ /* No need to consider huge page here. */
++ if (item->slot->vma->anon_vma != page_anon_vma(page) ||
++ vma_page_address(page, item->slot->vma) != get_rmap_addr(item)) {
++ /*
++ * TODO:
++ * should we release this item becase of its stale page
++ * mapping?
++ */
++ put_page(page);
++ rcu_read_unlock();
++ goto failout_up;
++ }
++ rcu_read_unlock();
++ return 0;
++
++failout_up:
++ up_read(&mm->mmap_sem);
++ return err;
++}
++
++/*
++ * What kind of VMA is considered ?
++ */
++static inline int vma_can_enter(struct vm_area_struct *vma)
++{
++ return uksm_flags_can_scan(vma->vm_flags);
++}
++
++/*
++ * Called whenever a fresh new vma is created A new vma_slot.
++ * is created and inserted into a global list Must be called.
++ * after vma is inserted to its mm.
++ */
++void uksm_vma_add_new(struct vm_area_struct *vma)
++{
++ struct vma_slot *slot;
++
++ if (!vma_can_enter(vma)) {
++ vma->uksm_vma_slot = NULL;
++ return;
++ }
++
++ slot = alloc_vma_slot();
++ if (!slot) {
++ vma->uksm_vma_slot = NULL;
++ return;
++ }
++
++ vma->uksm_vma_slot = slot;
++ vma->vm_flags |= VM_MERGEABLE;
++ slot->vma = vma;
++ slot->mm = vma->vm_mm;
++ slot->ctime_j = jiffies;
++ slot->pages = vma_pages(vma);
++ spin_lock(&vma_slot_list_lock);
++ list_add_tail(&slot->slot_list, &vma_slot_new);
++ spin_unlock(&vma_slot_list_lock);
++}
++
++/* 32/3 < they < 32/2 */
++#define shiftl 8
++#define shiftr 12
++
++#define HASH_FROM_TO(from, to) \
++for (index = from; index < to; index++) { \
++ pos = random_nums[index]; \
++ hash += key[pos]; \
++ hash += (hash << shiftl); \
++ hash ^= (hash >> shiftr); \
++}
++
++
++#define HASH_FROM_DOWN_TO(from, to) \
++for (index = from - 1; index >= to; index--) { \
++ hash ^= (hash >> shiftr); \
++ hash ^= (hash >> (shiftr*2)); \
++ hash -= (hash << shiftl); \
++ hash += (hash << (shiftl*2)); \
++ pos = random_nums[index]; \
++ hash -= key[pos]; \
++}
++
++/*
++ * The main random sample hash function.
++ */
++static u32 random_sample_hash(void *addr, u32 hash_strength)
++{
++ u32 hash = 0xdeadbeef;
++ int index, pos, loop = hash_strength;
++ u32 *key = (u32 *)addr;
++
++ if (loop > HASH_STRENGTH_FULL)
++ loop = HASH_STRENGTH_FULL;
++
++ HASH_FROM_TO(0, loop);
++
++ if (hash_strength > HASH_STRENGTH_FULL) {
++ loop = hash_strength - HASH_STRENGTH_FULL;
++ HASH_FROM_TO(0, loop);
++ }
++
++ return hash;
++}
++
++
++/**
++ * It's used when hash strength is adjusted
++ *
++ * @addr The page's virtual address
++ * @from The original hash strength
++ * @to The hash strength changed to
++ * @hash The hash value generated with "from" hash value
++ *
++ * return the hash value
++ */
++static u32 delta_hash(void *addr, int from, int to, u32 hash)
++{
++ u32 *key = (u32 *)addr;
++ int index, pos; /* make sure they are int type */
++
++ if (to > from) {
++ if (from >= HASH_STRENGTH_FULL) {
++ from -= HASH_STRENGTH_FULL;
++ to -= HASH_STRENGTH_FULL;
++ HASH_FROM_TO(from, to);
++ } else if (to <= HASH_STRENGTH_FULL) {
++ HASH_FROM_TO(from, to);
++ } else {
++ HASH_FROM_TO(from, HASH_STRENGTH_FULL);
++ HASH_FROM_TO(0, to - HASH_STRENGTH_FULL);
++ }
++ } else {
++ if (from <= HASH_STRENGTH_FULL) {
++ HASH_FROM_DOWN_TO(from, to);
++ } else if (to >= HASH_STRENGTH_FULL) {
++ from -= HASH_STRENGTH_FULL;
++ to -= HASH_STRENGTH_FULL;
++ HASH_FROM_DOWN_TO(from, to);
++ } else {
++ HASH_FROM_DOWN_TO(from - HASH_STRENGTH_FULL, 0);
++ HASH_FROM_DOWN_TO(HASH_STRENGTH_FULL, to);
++ }
++ }
++
++ return hash;
++}
++
++/**
++ *
++ * Called when: rshash_pos or rshash_neg is about to overflow or a scan round
++ * has finished.
++ *
++ * return 0 if no page has been scanned since last call, 1 otherwise.
++ */
++static inline int encode_benefit(void)
++{
++ u64 scanned_delta, pos_delta, neg_delta;
++ unsigned long base = benefit.base;
++
++ scanned_delta = uksm_pages_scanned - uksm_pages_scanned_last;
++
++ if (!scanned_delta)
++ return 0;
++
++ scanned_delta >>= base;
++ pos_delta = rshash_pos >> base;
++ neg_delta = rshash_neg >> base;
++
++ if (CAN_OVERFLOW_U64(benefit.pos, pos_delta) ||
++ CAN_OVERFLOW_U64(benefit.neg, neg_delta) ||
++ CAN_OVERFLOW_U64(benefit.scanned, scanned_delta)) {
++ benefit.scanned >>= 1;
++ benefit.neg >>= 1;
++ benefit.pos >>= 1;
++ benefit.base++;
++ scanned_delta >>= 1;
++ pos_delta >>= 1;
++ neg_delta >>= 1;
++ }
++
++ benefit.pos += pos_delta;
++ benefit.neg += neg_delta;
++ benefit.scanned += scanned_delta;
++
++ BUG_ON(!benefit.scanned);
++
++ rshash_pos = rshash_neg = 0;
++ uksm_pages_scanned_last = uksm_pages_scanned;
++
++ return 1;
++}
++
++static inline void reset_benefit(void)
++{
++ benefit.pos = 0;
++ benefit.neg = 0;
++ benefit.base = 0;
++ benefit.scanned = 0;
++}
++
++static inline void inc_rshash_pos(unsigned long delta)
++{
++ if (CAN_OVERFLOW_U64(rshash_pos, delta))
++ encode_benefit();
++
++ rshash_pos += delta;
++}
++
++static inline void inc_rshash_neg(unsigned long delta)
++{
++ if (CAN_OVERFLOW_U64(rshash_neg, delta))
++ encode_benefit();
++
++ rshash_neg += delta;
++}
++
++
++static inline u32 page_hash(struct page *page, unsigned long hash_strength,
++ int cost_accounting)
++{
++ u32 val;
++ unsigned long delta;
++
++ void *addr = kmap_atomic(page);
++
++ val = random_sample_hash(addr, hash_strength);
++ kunmap_atomic(addr);
++
++ if (cost_accounting) {
++ if (hash_strength < HASH_STRENGTH_FULL)
++ delta = HASH_STRENGTH_FULL - hash_strength;
++ else
++ delta = 0;
++
++ inc_rshash_pos(delta);
++ }
++
++ return val;
++}
++
++static int memcmp_pages(struct page *page1, struct page *page2,
++ int cost_accounting)
++{
++ char *addr1, *addr2;
++ int ret;
++
++ addr1 = kmap_atomic(page1);
++ addr2 = kmap_atomic(page2);
++ ret = memcmp(addr1, addr2, PAGE_SIZE);
++ kunmap_atomic(addr2);
++ kunmap_atomic(addr1);
++
++ if (cost_accounting)
++ inc_rshash_neg(memcmp_cost);
++
++ return ret;
++}
++
++static inline int pages_identical(struct page *page1, struct page *page2)
++{
++ return !memcmp_pages(page1, page2, 0);
++}
++
++static inline int is_page_full_zero(struct page *page)
++{
++ char *addr;
++ int ret;
++
++ addr = kmap_atomic(page);
++ ret = is_full_zero(addr, PAGE_SIZE);
++ kunmap_atomic(addr);
++
++ return ret;
++}
++
++static int write_protect_page(struct vm_area_struct *vma, struct page *page,
++ pte_t *orig_pte, pte_t *old_pte)
++{
++ struct mm_struct *mm = vma->vm_mm;
++ struct page_vma_mapped_walk pvmw = {
++ .page = page,
++ .vma = vma,
++ };
++ int swapped;
++ int err = -EFAULT;
++ unsigned long mmun_start; /* For mmu_notifiers */
++ unsigned long mmun_end; /* For mmu_notifiers */
++
++ pvmw.address = page_address_in_vma(page, vma);
++ if (pvmw.address == -EFAULT)
++ goto out;
++
++ BUG_ON(PageTransCompound(page));
++
++ mmun_start = pvmw.address;
++ mmun_end = pvmw.address + PAGE_SIZE;
++ mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);
++
++ if (!page_vma_mapped_walk(&pvmw))
++ goto out_mn;
++ if (WARN_ONCE(!pvmw.pte, "Unexpected PMD mapping?"))
++ goto out_unlock;
++
++ if (old_pte)
++ *old_pte = *pvmw.pte;
++
++ if (pte_write(*pvmw.pte) || pte_dirty(*pvmw.pte) ||
++ (pte_protnone(*pvmw.pte) && pte_savedwrite(*pvmw.pte)) || mm_tlb_flush_pending(mm)) {
++ pte_t entry;
++
++ swapped = PageSwapCache(page);
++ flush_cache_page(vma, pvmw.address, page_to_pfn(page));
++ /*
++ * Ok this is tricky, when get_user_pages_fast() run it doesn't
++ * take any lock, therefore the check that we are going to make
++ * with the pagecount against the mapcount is racey and
++ * O_DIRECT can happen right after the check.
++ * So we clear the pte and flush the tlb before the check
++ * this assure us that no O_DIRECT can happen after the check
++ * or in the middle of the check.
++ */
++ entry = ptep_clear_flush_notify(vma, pvmw.address, pvmw.pte);
++ /*
++ * Check that no O_DIRECT or similar I/O is in progress on the
++ * page
++ */
++ if (page_mapcount(page) + 1 + swapped != page_count(page)) {
++ set_pte_at(mm, pvmw.address, pvmw.pte, entry);
++ goto out_unlock;
++ }
++ if (pte_dirty(entry))
++ set_page_dirty(page);
++
++ if (pte_protnone(entry))
++ entry = pte_mkclean(pte_clear_savedwrite(entry));
++ else
++ entry = pte_mkclean(pte_wrprotect(entry));
++
++ set_pte_at_notify(mm, pvmw.address, pvmw.pte, entry);
++ }
++ *orig_pte = *pvmw.pte;
++ err = 0;
++
++out_unlock:
++ page_vma_mapped_walk_done(&pvmw);
++out_mn:
++ mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
++out:
++ return err;
++}
++
++#define MERGE_ERR_PGERR 1 /* the page is invalid cannot continue */
++#define MERGE_ERR_COLLI 2 /* there is a collision */
++#define MERGE_ERR_COLLI_MAX 3 /* collision at the max hash strength */
++#define MERGE_ERR_CHANGED 4 /* the page has changed since last hash */
++
++
++/**
++ * replace_page - replace page in vma by new ksm page
++ * @vma: vma that holds the pte pointing to page
++ * @page: the page we are replacing by kpage
++ * @kpage: the ksm page we replace page by
++ * @orig_pte: the original value of the pte
++ *
++ * Returns 0 on success, MERGE_ERR_PGERR on failure.
++ */
++static int replace_page(struct vm_area_struct *vma, struct page *page,
++ struct page *kpage, pte_t orig_pte)
++{
++ struct mm_struct *mm = vma->vm_mm;
++ pgd_t *pgd;
++ p4d_t *p4d;
++ pud_t *pud;
++ pmd_t *pmd;
++ pte_t *ptep;
++ spinlock_t *ptl;
++ pte_t entry;
++
++ unsigned long addr;
++ int err = MERGE_ERR_PGERR;
++ unsigned long mmun_start; /* For mmu_notifiers */
++ unsigned long mmun_end; /* For mmu_notifiers */
++
++ addr = page_address_in_vma(page, vma);
++ if (addr == -EFAULT)
++ goto out;
++
++ pgd = pgd_offset(mm, addr);
++ if (!pgd_present(*pgd))
++ goto out;
++
++ p4d = p4d_offset(pgd, addr);
++ pud = pud_offset(p4d, addr);
++ if (!pud_present(*pud))
++ goto out;
++
++ pmd = pmd_offset(pud, addr);
++ BUG_ON(pmd_trans_huge(*pmd));
++ if (!pmd_present(*pmd))
++ goto out;
++
++ mmun_start = addr;
++ mmun_end = addr + PAGE_SIZE;
++ mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);
++
++ ptep = pte_offset_map_lock(mm, pmd, addr, &ptl);
++ if (!pte_same(*ptep, orig_pte)) {
++ pte_unmap_unlock(ptep, ptl);
++ goto out_mn;
++ }
++
++ flush_cache_page(vma, addr, pte_pfn(*ptep));
++ ptep_clear_flush_notify(vma, addr, ptep);
++ entry = mk_pte(kpage, vma->vm_page_prot);
++
++ /* special treatment is needed for zero_page */
++ if ((page_to_pfn(kpage) == uksm_zero_pfn) ||
++ (page_to_pfn(kpage) == zero_pfn)) {
++ entry = pte_mkspecial(entry);
++ dec_mm_counter(mm, MM_ANONPAGES);
++ inc_zone_page_state(page, NR_UKSM_ZERO_PAGES);
++ } else {
++ get_page(kpage);
++ page_add_anon_rmap(kpage, vma, addr, false);
++ }
++
++ set_pte_at_notify(mm, addr, ptep, entry);
++
++ page_remove_rmap(page, false);
++ if (!page_mapped(page))
++ try_to_free_swap(page);
++ put_page(page);
++
++ pte_unmap_unlock(ptep, ptl);
++ err = 0;
++out_mn:
++ mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
++out:
++ return err;
++}
++
++
++/**
++ * Fully hash a page with HASH_STRENGTH_MAX return a non-zero hash value. The
++ * zero hash value at HASH_STRENGTH_MAX is used to indicated that its
++ * hash_max member has not been calculated.
++ *
++ * @page The page needs to be hashed
++ * @hash_old The hash value calculated with current hash strength
++ *
++ * return the new hash value calculated at HASH_STRENGTH_MAX
++ */
++static inline u32 page_hash_max(struct page *page, u32 hash_old)
++{
++ u32 hash_max = 0;
++ void *addr;
++
++ addr = kmap_atomic(page);
++ hash_max = delta_hash(addr, hash_strength,
++ HASH_STRENGTH_MAX, hash_old);
++
++ kunmap_atomic(addr);
++
++ if (!hash_max)
++ hash_max = 1;
++
++ inc_rshash_neg(HASH_STRENGTH_MAX - hash_strength);
++ return hash_max;
++}
++
++/*
++ * We compare the hash again, to ensure that it is really a hash collision
++ * instead of being caused by page write.
++ */
++static inline int check_collision(struct rmap_item *rmap_item,
++ u32 hash)
++{
++ int err;
++ struct page *page = rmap_item->page;
++
++ /* if this rmap_item has already been hash_maxed, then the collision
++ * must appears in the second-level rbtree search. In this case we check
++ * if its hash_max value has been changed. Otherwise, the collision
++ * happens in the first-level rbtree search, so we check against it's
++ * current hash value.
++ */
++ if (rmap_item->hash_max) {
++ inc_rshash_neg(memcmp_cost);
++ inc_rshash_neg(HASH_STRENGTH_MAX - hash_strength);
++
++ if (rmap_item->hash_max == page_hash_max(page, hash))
++ err = MERGE_ERR_COLLI;
++ else
++ err = MERGE_ERR_CHANGED;
++ } else {
++ inc_rshash_neg(memcmp_cost + hash_strength);
++
++ if (page_hash(page, hash_strength, 0) == hash)
++ err = MERGE_ERR_COLLI;
++ else
++ err = MERGE_ERR_CHANGED;
++ }
++
++ return err;
++}
++
++/**
++ * Try to merge a rmap_item.page with a kpage in stable node. kpage must
++ * already be a ksm page.
++ *
++ * @return 0 if the pages were merged, -EFAULT otherwise.
++ */
++static int try_to_merge_with_uksm_page(struct rmap_item *rmap_item,
++ struct page *kpage, u32 hash)
++{
++ struct vm_area_struct *vma = rmap_item->slot->vma;
++ struct mm_struct *mm = vma->vm_mm;
++ pte_t orig_pte = __pte(0);
++ int err = MERGE_ERR_PGERR;
++ struct page *page;
++
++ if (uksm_test_exit(mm))
++ goto out;
++
++ page = rmap_item->page;
++
++ if (page == kpage) { /* ksm page forked */
++ err = 0;
++ goto out;
++ }
++
++ /*
++ * We need the page lock to read a stable PageSwapCache in
++ * write_protect_page(). We use trylock_page() instead of
++ * lock_page() because we don't want to wait here - we
++ * prefer to continue scanning and merging different pages,
++ * then come back to this page when it is unlocked.
++ */
++ if (!trylock_page(page))
++ goto out;
++
++ if (!PageAnon(page) || !PageKsm(kpage))
++ goto out_unlock;
++
++ if (PageTransCompound(page)) {
++ err = split_huge_page(page);
++ if (err)
++ goto out_unlock;
++ }
++
++ /*
++ * If this anonymous page is mapped only here, its pte may need
++ * to be write-protected. If it's mapped elsewhere, all of its
++ * ptes are necessarily already write-protected. But in either
++ * case, we need to lock and check page_count is not raised.
++ */
++ if (write_protect_page(vma, page, &orig_pte, NULL) == 0) {
++ if (pages_identical(page, kpage))
++ err = replace_page(vma, page, kpage, orig_pte);
++ else
++ err = check_collision(rmap_item, hash);
++ }
++
++ if ((vma->vm_flags & VM_LOCKED) && kpage && !err) {
++ munlock_vma_page(page);
++ if (!PageMlocked(kpage)) {
++ unlock_page(page);
++ lock_page(kpage);
++ mlock_vma_page(kpage);
++ page = kpage; /* for final unlock */
++ }
++ }
++
++out_unlock:
++ unlock_page(page);
++out:
++ return err;
++}
++
++
++
++/**
++ * If two pages fail to merge in try_to_merge_two_pages, then we have a chance
++ * to restore a page mapping that has been changed in try_to_merge_two_pages.
++ *
++ * @return 0 on success.
++ */
++static int restore_uksm_page_pte(struct vm_area_struct *vma, unsigned long addr,
++ pte_t orig_pte, pte_t wprt_pte)
++{
++ struct mm_struct *mm = vma->vm_mm;
++ pgd_t *pgd;
++ p4d_t *p4d;
++ pud_t *pud;
++ pmd_t *pmd;
++ pte_t *ptep;
++ spinlock_t *ptl;
++
++ int err = -EFAULT;
++
++ pgd = pgd_offset(mm, addr);
++ if (!pgd_present(*pgd))
++ goto out;
++
++ p4d = p4d_offset(pgd, addr);
++ pud = pud_offset(p4d, addr);
++ if (!pud_present(*pud))
++ goto out;
++
++ pmd = pmd_offset(pud, addr);
++ if (!pmd_present(*pmd))
++ goto out;
++
++ ptep = pte_offset_map_lock(mm, pmd, addr, &ptl);
++ if (!pte_same(*ptep, wprt_pte)) {
++ /* already copied, let it be */
++ pte_unmap_unlock(ptep, ptl);
++ goto out;
++ }
++
++ /*
++ * Good boy, still here. When we still get the ksm page, it does not
++ * return to the free page pool, there is no way that a pte was changed
++ * to other page and gets back to this page. And remind that ksm page
++ * do not reuse in do_wp_page(). So it's safe to restore the original
++ * pte.
++ */
++ flush_cache_page(vma, addr, pte_pfn(*ptep));
++ ptep_clear_flush_notify(vma, addr, ptep);
++ set_pte_at_notify(mm, addr, ptep, orig_pte);
++
++ pte_unmap_unlock(ptep, ptl);
++ err = 0;
++out:
++ return err;
++}
++
++/**
++ * try_to_merge_two_pages() - take two identical pages and prepare
++ * them to be merged into one page(rmap_item->page)
++ *
++ * @return 0 if we successfully merged two identical pages into
++ * one ksm page. MERGE_ERR_COLLI if it's only a hash collision
++ * search in rbtree. MERGE_ERR_CHANGED if rmap_item has been
++ * changed since it's hashed. MERGE_ERR_PGERR otherwise.
++ *
++ */
++static int try_to_merge_two_pages(struct rmap_item *rmap_item,
++ struct rmap_item *tree_rmap_item,
++ u32 hash)
++{
++ pte_t orig_pte1 = __pte(0), orig_pte2 = __pte(0);
++ pte_t wprt_pte1 = __pte(0), wprt_pte2 = __pte(0);
++ struct vm_area_struct *vma1 = rmap_item->slot->vma;
++ struct vm_area_struct *vma2 = tree_rmap_item->slot->vma;
++ struct page *page = rmap_item->page;
++ struct page *tree_page = tree_rmap_item->page;
++ int err = MERGE_ERR_PGERR;
++ struct address_space *saved_mapping;
++
++
++ if (rmap_item->page == tree_rmap_item->page)
++ goto out;
++
++ if (!trylock_page(page))
++ goto out;
++
++ if (!PageAnon(page))
++ goto out_unlock;
++
++ if (PageTransCompound(page)) {
++ err = split_huge_page(page);
++ if (err)
++ goto out_unlock;
++ }
++
++ if (write_protect_page(vma1, page, &wprt_pte1, &orig_pte1) != 0) {
++ unlock_page(page);
++ goto out;
++ }
++
++ /*
++ * While we hold page lock, upgrade page from
++ * PageAnon+anon_vma to PageKsm+NULL stable_node:
++ * stable_tree_insert() will update stable_node.
++ */
++ saved_mapping = page->mapping;
++ set_page_stable_node(page, NULL);
++ mark_page_accessed(page);
++ if (!PageDirty(page))
++ SetPageDirty(page);
++
++ unlock_page(page);
++
++ if (!trylock_page(tree_page))
++ goto restore_out;
++
++ if (!PageAnon(tree_page)) {
++ unlock_page(tree_page);
++ goto restore_out;
++ }
++
++ if (PageTransCompound(tree_page)) {
++ err = split_huge_page(tree_page);
++ if (err) {
++ unlock_page(tree_page);
++ goto restore_out;
++ }
++ }
++
++ if (write_protect_page(vma2, tree_page, &wprt_pte2, &orig_pte2) != 0) {
++ unlock_page(tree_page);
++ goto restore_out;
++ }
++
++ if (pages_identical(page, tree_page)) {
++ err = replace_page(vma2, tree_page, page, wprt_pte2);
++ if (err) {
++ unlock_page(tree_page);
++ goto restore_out;
++ }
++
++ if ((vma2->vm_flags & VM_LOCKED)) {
++ munlock_vma_page(tree_page);
++ if (!PageMlocked(page)) {
++ unlock_page(tree_page);
++ lock_page(page);
++ mlock_vma_page(page);
++ tree_page = page; /* for final unlock */
++ }
++ }
++
++ unlock_page(tree_page);
++
++ goto out; /* success */
++
++ } else {
++ if (tree_rmap_item->hash_max &&
++ tree_rmap_item->hash_max == rmap_item->hash_max) {
++ err = MERGE_ERR_COLLI_MAX;
++ } else if (page_hash(page, hash_strength, 0) ==
++ page_hash(tree_page, hash_strength, 0)) {
++ inc_rshash_neg(memcmp_cost + hash_strength * 2);
++ err = MERGE_ERR_COLLI;
++ } else {
++ err = MERGE_ERR_CHANGED;
++ }
++
++ unlock_page(tree_page);
++ }
++
++restore_out:
++ lock_page(page);
++ if (!restore_uksm_page_pte(vma1, get_rmap_addr(rmap_item),
++ orig_pte1, wprt_pte1))
++ page->mapping = saved_mapping;
++
++out_unlock:
++ unlock_page(page);
++out:
++ return err;
++}
++
++static inline int hash_cmp(u32 new_val, u32 node_val)
++{
++ if (new_val > node_val)
++ return 1;
++ else if (new_val < node_val)
++ return -1;
++ else
++ return 0;
++}
++
++static inline u32 rmap_item_hash_max(struct rmap_item *item, u32 hash)
++{
++ u32 hash_max = item->hash_max;
++
++ if (!hash_max) {
++ hash_max = page_hash_max(item->page, hash);
++
++ item->hash_max = hash_max;
++ }
++
++ return hash_max;
++}
++
++
++
++/**
++ * stable_tree_search() - search the stable tree for a page
++ *
++ * @item: the rmap_item we are comparing with
++ * @hash: the hash value of this item->page already calculated
++ *
++ * @return the page we have found, NULL otherwise. The page returned has
++ * been gotten.
++ */
++static struct page *stable_tree_search(struct rmap_item *item, u32 hash)
++{
++ struct rb_node *node = root_stable_treep->rb_node;
++ struct tree_node *tree_node;
++ unsigned long hash_max;
++ struct page *page = item->page;
++ struct stable_node *stable_node;
++
++ stable_node = page_stable_node(page);
++ if (stable_node) {
++ /* ksm page forked, that is
++ * if (PageKsm(page) && !in_stable_tree(rmap_item))
++ * it's actually gotten once outside.
++ */
++ get_page(page);
++ return page;
++ }
++
++ while (node) {
++ int cmp;
++
++ tree_node = rb_entry(node, struct tree_node, node);
++
++ cmp = hash_cmp(hash, tree_node->hash);
++
++ if (cmp < 0)
++ node = node->rb_left;
++ else if (cmp > 0)
++ node = node->rb_right;
++ else
++ break;
++ }
++
++ if (!node)
++ return NULL;
++
++ if (tree_node->count == 1) {
++ stable_node = rb_entry(tree_node->sub_root.rb_node,
++ struct stable_node, node);
++ BUG_ON(!stable_node);
++
++ goto get_page_out;
++ }
++
++ /*
++ * ok, we have to search the second
++ * level subtree, hash the page to a
++ * full strength.
++ */
++ node = tree_node->sub_root.rb_node;
++ BUG_ON(!node);
++ hash_max = rmap_item_hash_max(item, hash);
++
++ while (node) {
++ int cmp;
++
++ stable_node = rb_entry(node, struct stable_node, node);
++
++ cmp = hash_cmp(hash_max, stable_node->hash_max);
++
++ if (cmp < 0)
++ node = node->rb_left;
++ else if (cmp > 0)
++ node = node->rb_right;
++ else
++ goto get_page_out;
++ }
++
++ return NULL;
++
++get_page_out:
++ page = get_uksm_page(stable_node, 1, 1);
++ return page;
++}
++
++static int try_merge_rmap_item(struct rmap_item *item,
++ struct page *kpage,
++ struct page *tree_page)
++{
++ struct vm_area_struct *vma = item->slot->vma;
++ struct page_vma_mapped_walk pvmw = {
++ .page = kpage,
++ .vma = vma,
++ };
++
++ pvmw.address = get_rmap_addr(item);
++ if (!page_vma_mapped_walk(&pvmw))
++ return 0;
++
++ if (pte_write(*pvmw.pte)) {
++ /* has changed, abort! */
++ page_vma_mapped_walk_done(&pvmw);
++ return 0;
++ }
++
++ get_page(tree_page);
++ page_add_anon_rmap(tree_page, vma, pvmw.address, false);
++
++ flush_cache_page(vma, pvmw.address, page_to_pfn(kpage));
++ ptep_clear_flush_notify(vma, pvmw.address, pvmw.pte);
++ set_pte_at_notify(vma->vm_mm, pvmw.address, pvmw.pte,
++ mk_pte(tree_page, vma->vm_page_prot));
++
++ page_remove_rmap(kpage, false);
++ put_page(kpage);
++
++ page_vma_mapped_walk_done(&pvmw);
++
++ return 1;
++}
++
++/**
++ * try_to_merge_with_stable_page() - when two rmap_items need to be inserted
++ * into stable tree, the page was found to be identical to a stable ksm page,
++ * this is the last chance we can merge them into one.
++ *
++ * @item1: the rmap_item holding the page which we wanted to insert
++ * into stable tree.
++ * @item2: the other rmap_item we found when unstable tree search
++ * @oldpage: the page currently mapped by the two rmap_items
++ * @tree_page: the page we found identical in stable tree node
++ * @success1: return if item1 is successfully merged
++ * @success2: return if item2 is successfully merged
++ */
++static void try_merge_with_stable(struct rmap_item *item1,
++ struct rmap_item *item2,
++ struct page **kpage,
++ struct page *tree_page,
++ int *success1, int *success2)
++{
++ struct vm_area_struct *vma1 = item1->slot->vma;
++ struct vm_area_struct *vma2 = item2->slot->vma;
++ *success1 = 0;
++ *success2 = 0;
++
++ if (unlikely(*kpage == tree_page)) {
++ /* I don't think this can really happen */
++ pr_warn("UKSM: unexpected condition detected in "
++ "%s -- *kpage == tree_page !\n", __func__);
++ *success1 = 1;
++ *success2 = 1;
++ return;
++ }
++
++ if (!PageAnon(*kpage) || !PageKsm(*kpage))
++ goto failed;
++
++ if (!trylock_page(tree_page))
++ goto failed;
++
++ /* If the oldpage is still ksm and still pointed
++ * to in the right place, and still write protected,
++ * we are confident it's not changed, no need to
++ * memcmp anymore.
++ * be ware, we cannot take nested pte locks,
++ * deadlock risk.
++ */
++ if (!try_merge_rmap_item(item1, *kpage, tree_page))
++ goto unlock_failed;
++
++ /* ok, then vma2, remind that pte1 already set */
++ if (!try_merge_rmap_item(item2, *kpage, tree_page))
++ goto success_1;
++
++ *success2 = 1;
++success_1:
++ *success1 = 1;
++
++
++ if ((*success1 && vma1->vm_flags & VM_LOCKED) ||
++ (*success2 && vma2->vm_flags & VM_LOCKED)) {
++ munlock_vma_page(*kpage);
++ if (!PageMlocked(tree_page))
++ mlock_vma_page(tree_page);
++ }
++
++ /*
++ * We do not need oldpage any more in the caller, so can break the lock
++ * now.
++ */
++ unlock_page(*kpage);
++ *kpage = tree_page; /* Get unlocked outside. */
++ return;
++
++unlock_failed:
++ unlock_page(tree_page);
++failed:
++ return;
++}
++
++static inline void stable_node_hash_max(struct stable_node *node,
++ struct page *page, u32 hash)
++{
++ u32 hash_max = node->hash_max;
++
++ if (!hash_max) {
++ hash_max = page_hash_max(page, hash);
++ node->hash_max = hash_max;
++ }
++}
++
++static inline
++struct stable_node *new_stable_node(struct tree_node *tree_node,
++ struct page *kpage, u32 hash_max)
++{
++ struct stable_node *new_stable_node;
++
++ new_stable_node = alloc_stable_node();
++ if (!new_stable_node)
++ return NULL;
++
++ new_stable_node->kpfn = page_to_pfn(kpage);
++ new_stable_node->hash_max = hash_max;
++ new_stable_node->tree_node = tree_node;
++ set_page_stable_node(kpage, new_stable_node);
++
++ return new_stable_node;
++}
++
++static inline
++struct stable_node *first_level_insert(struct tree_node *tree_node,
++ struct rmap_item *rmap_item,
++ struct rmap_item *tree_rmap_item,
++ struct page **kpage, u32 hash,
++ int *success1, int *success2)
++{
++ int cmp;
++ struct page *tree_page;
++ u32 hash_max = 0;
++ struct stable_node *stable_node, *new_snode;
++ struct rb_node *parent = NULL, **new;
++
++ /* this tree node contains no sub-tree yet */
++ stable_node = rb_entry(tree_node->sub_root.rb_node,
++ struct stable_node, node);
++
++ tree_page = get_uksm_page(stable_node, 1, 0);
++ if (tree_page) {
++ cmp = memcmp_pages(*kpage, tree_page, 1);
++ if (!cmp) {
++ try_merge_with_stable(rmap_item, tree_rmap_item, kpage,
++ tree_page, success1, success2);
++ put_page(tree_page);
++ if (!*success1 && !*success2)
++ goto failed;
++
++ return stable_node;
++
++ } else {
++ /*
++ * collision in first level try to create a subtree.
++ * A new node need to be created.
++ */
++ put_page(tree_page);
++
++ stable_node_hash_max(stable_node, tree_page,
++ tree_node->hash);
++ hash_max = rmap_item_hash_max(rmap_item, hash);
++ cmp = hash_cmp(hash_max, stable_node->hash_max);
++
++ parent = &stable_node->node;
++ if (cmp < 0)
++ new = &parent->rb_left;
++ else if (cmp > 0)
++ new = &parent->rb_right;
++ else
++ goto failed;
++ }
++
++ } else {
++ /* the only stable_node deleted, we reuse its tree_node.
++ */
++ parent = NULL;
++ new = &tree_node->sub_root.rb_node;
++ }
++
++ new_snode = new_stable_node(tree_node, *kpage, hash_max);
++ if (!new_snode)
++ goto failed;
++
++ rb_link_node(&new_snode->node, parent, new);
++ rb_insert_color(&new_snode->node, &tree_node->sub_root);
++ tree_node->count++;
++ *success1 = *success2 = 1;
++
++ return new_snode;
++
++failed:
++ return NULL;
++}
++
++static inline
++struct stable_node *stable_subtree_insert(struct tree_node *tree_node,
++ struct rmap_item *rmap_item,
++ struct rmap_item *tree_rmap_item,
++ struct page **kpage, u32 hash,
++ int *success1, int *success2)
++{
++ struct page *tree_page;
++ u32 hash_max;
++ struct stable_node *stable_node, *new_snode;
++ struct rb_node *parent, **new;
++
++research:
++ parent = NULL;
++ new = &tree_node->sub_root.rb_node;
++ BUG_ON(!*new);
++ hash_max = rmap_item_hash_max(rmap_item, hash);
++ while (*new) {
++ int cmp;
++
++ stable_node = rb_entry(*new, struct stable_node, node);
++
++ cmp = hash_cmp(hash_max, stable_node->hash_max);
++
++ if (cmp < 0) {
++ parent = *new;
++ new = &parent->rb_left;
++ } else if (cmp > 0) {
++ parent = *new;
++ new = &parent->rb_right;
++ } else {
++ tree_page = get_uksm_page(stable_node, 1, 0);
++ if (tree_page) {
++ cmp = memcmp_pages(*kpage, tree_page, 1);
++ if (!cmp) {
++ try_merge_with_stable(rmap_item,
++ tree_rmap_item, kpage,
++ tree_page, success1, success2);
++
++ put_page(tree_page);
++ if (!*success1 && !*success2)
++ goto failed;
++ /*
++ * successfully merged with a stable
++ * node
++ */
++ return stable_node;
++ } else {
++ put_page(tree_page);
++ goto failed;
++ }
++ } else {
++ /*
++ * stable node may be deleted,
++ * and subtree maybe
++ * restructed, cannot
++ * continue, research it.
++ */
++ if (tree_node->count) {
++ goto research;
++ } else {
++ /* reuse the tree node*/
++ parent = NULL;
++ new = &tree_node->sub_root.rb_node;
++ }
++ }
++ }
++ }
++
++ new_snode = new_stable_node(tree_node, *kpage, hash_max);
++ if (!new_snode)
++ goto failed;
++
++ rb_link_node(&new_snode->node, parent, new);
++ rb_insert_color(&new_snode->node, &tree_node->sub_root);
++ tree_node->count++;
++ *success1 = *success2 = 1;
++
++ return new_snode;
++
++failed:
++ return NULL;
++}
++
++
++/**
++ * stable_tree_insert() - try to insert a merged page in unstable tree to
++ * the stable tree
++ *
++ * @kpage: the page need to be inserted
++ * @hash: the current hash of this page
++ * @rmap_item: the rmap_item being scanned
++ * @tree_rmap_item: the rmap_item found on unstable tree
++ * @success1: return if rmap_item is merged
++ * @success2: return if tree_rmap_item is merged
++ *
++ * @return the stable_node on stable tree if at least one
++ * rmap_item is inserted into stable tree, NULL
++ * otherwise.
++ */
++static struct stable_node *
++stable_tree_insert(struct page **kpage, u32 hash,
++ struct rmap_item *rmap_item,
++ struct rmap_item *tree_rmap_item,
++ int *success1, int *success2)
++{
++ struct rb_node **new = &root_stable_treep->rb_node;
++ struct rb_node *parent = NULL;
++ struct stable_node *stable_node;
++ struct tree_node *tree_node;
++ u32 hash_max = 0;
++
++ *success1 = *success2 = 0;
++
++ while (*new) {
++ int cmp;
++
++ tree_node = rb_entry(*new, struct tree_node, node);
++
++ cmp = hash_cmp(hash, tree_node->hash);
++
++ if (cmp < 0) {
++ parent = *new;
++ new = &parent->rb_left;
++ } else if (cmp > 0) {
++ parent = *new;
++ new = &parent->rb_right;
++ } else
++ break;
++ }
++
++ if (*new) {
++ if (tree_node->count == 1) {
++ stable_node = first_level_insert(tree_node, rmap_item,
++ tree_rmap_item, kpage,
++ hash, success1, success2);
++ } else {
++ stable_node = stable_subtree_insert(tree_node,
++ rmap_item, tree_rmap_item, kpage,
++ hash, success1, success2);
++ }
++ } else {
++
++ /* no tree node found */
++ tree_node = alloc_tree_node(stable_tree_node_listp);
++ if (!tree_node) {
++ stable_node = NULL;
++ goto out;
++ }
++
++ stable_node = new_stable_node(tree_node, *kpage, hash_max);
++ if (!stable_node) {
++ free_tree_node(tree_node);
++ goto out;
++ }
++
++ tree_node->hash = hash;
++ rb_link_node(&tree_node->node, parent, new);
++ rb_insert_color(&tree_node->node, root_stable_treep);
++ parent = NULL;
++ new = &tree_node->sub_root.rb_node;
++
++ rb_link_node(&stable_node->node, parent, new);
++ rb_insert_color(&stable_node->node, &tree_node->sub_root);
++ tree_node->count++;
++ *success1 = *success2 = 1;
++ }
++
++out:
++ return stable_node;
++}
++
++
++/**
++ * get_tree_rmap_item_page() - try to get the page and lock the mmap_sem
++ *
++ * @return 0 on success, -EBUSY if unable to lock the mmap_sem,
++ * -EINVAL if the page mapping has been changed.
++ */
++static inline int get_tree_rmap_item_page(struct rmap_item *tree_rmap_item)
++{
++ int err;
++
++ err = get_mergeable_page_lock_mmap(tree_rmap_item);
++
++ if (err == -EINVAL) {
++ /* its page map has been changed, remove it */
++ remove_rmap_item_from_tree(tree_rmap_item);
++ }
++
++ /* The page is gotten and mmap_sem is locked now. */
++ return err;
++}
++
++
++/**
++ * unstable_tree_search_insert() - search an unstable tree rmap_item with the
++ * same hash value. Get its page and trylock the mmap_sem
++ */
++static inline
++struct rmap_item *unstable_tree_search_insert(struct rmap_item *rmap_item,
++ u32 hash)
++
++{
++ struct rb_node **new = &root_unstable_tree.rb_node;
++ struct rb_node *parent = NULL;
++ struct tree_node *tree_node;
++ u32 hash_max;
++ struct rmap_item *tree_rmap_item;
++
++ while (*new) {
++ int cmp;
++
++ tree_node = rb_entry(*new, struct tree_node, node);
++
++ cmp = hash_cmp(hash, tree_node->hash);
++
++ if (cmp < 0) {
++ parent = *new;
++ new = &parent->rb_left;
++ } else if (cmp > 0) {
++ parent = *new;
++ new = &parent->rb_right;
++ } else
++ break;
++ }
++
++ if (*new) {
++ /* got the tree_node */
++ if (tree_node->count == 1) {
++ tree_rmap_item = rb_entry(tree_node->sub_root.rb_node,
++ struct rmap_item, node);
++ BUG_ON(!tree_rmap_item);
++
++ goto get_page_out;
++ }
++
++ /* well, search the collision subtree */
++ new = &tree_node->sub_root.rb_node;
++ BUG_ON(!*new);
++ hash_max = rmap_item_hash_max(rmap_item, hash);
++
++ while (*new) {
++ int cmp;
++
++ tree_rmap_item = rb_entry(*new, struct rmap_item,
++ node);
++
++ cmp = hash_cmp(hash_max, tree_rmap_item->hash_max);
++ parent = *new;
++ if (cmp < 0)
++ new = &parent->rb_left;
++ else if (cmp > 0)
++ new = &parent->rb_right;
++ else
++ goto get_page_out;
++ }
++ } else {
++ /* alloc a new tree_node */
++ tree_node = alloc_tree_node(&unstable_tree_node_list);
++ if (!tree_node)
++ return NULL;
++
++ tree_node->hash = hash;
++ rb_link_node(&tree_node->node, parent, new);
++ rb_insert_color(&tree_node->node, &root_unstable_tree);
++ parent = NULL;
++ new = &tree_node->sub_root.rb_node;
++ }
++
++ /* did not found even in sub-tree */
++ rmap_item->tree_node = tree_node;
++ rmap_item->address |= UNSTABLE_FLAG;
++ rmap_item->hash_round = uksm_hash_round;
++ rb_link_node(&rmap_item->node, parent, new);
++ rb_insert_color(&rmap_item->node, &tree_node->sub_root);
++
++ uksm_pages_unshared++;
++ return NULL;
++
++get_page_out:
++ if (tree_rmap_item->page == rmap_item->page)
++ return NULL;
++
++ if (get_tree_rmap_item_page(tree_rmap_item))
++ return NULL;
++
++ return tree_rmap_item;
++}
++
++static void hold_anon_vma(struct rmap_item *rmap_item,
++ struct anon_vma *anon_vma)
++{
++ rmap_item->anon_vma = anon_vma;
++ get_anon_vma(anon_vma);
++}
++
++
++/**
++ * stable_tree_append() - append a rmap_item to a stable node. Deduplication
++ * ratio statistics is done in this function.
++ *
++ */
++static void stable_tree_append(struct rmap_item *rmap_item,
++ struct stable_node *stable_node, int logdedup)
++{
++ struct node_vma *node_vma = NULL, *new_node_vma, *node_vma_cont = NULL;
++ unsigned long key = (unsigned long)rmap_item->slot;
++ unsigned long factor = rmap_item->slot->rung->step;
++
++ BUG_ON(!stable_node);
++ rmap_item->address |= STABLE_FLAG;
++
++ if (hlist_empty(&stable_node->hlist)) {
++ uksm_pages_shared++;
++ goto node_vma_new;
++ } else {
++ uksm_pages_sharing++;
++ }
++
++ hlist_for_each_entry(node_vma, &stable_node->hlist, hlist) {
++ if (node_vma->key >= key)
++ break;
++
++ if (logdedup) {
++ node_vma->slot->pages_bemerged += factor;
++ if (list_empty(&node_vma->slot->dedup_list))
++ list_add(&node_vma->slot->dedup_list,
++ &vma_slot_dedup);
++ }
++ }
++
++ if (node_vma) {
++ if (node_vma->key == key) {
++ node_vma_cont = hlist_entry_safe(node_vma->hlist.next, struct node_vma, hlist);
++ goto node_vma_ok;
++ } else if (node_vma->key > key) {
++ node_vma_cont = node_vma;
++ }
++ }
++
++node_vma_new:
++ /* no same vma already in node, alloc a new node_vma */
++ new_node_vma = alloc_node_vma();
++ BUG_ON(!new_node_vma);
++ new_node_vma->head = stable_node;
++ new_node_vma->slot = rmap_item->slot;
++
++ if (!node_vma) {
++ hlist_add_head(&new_node_vma->hlist, &stable_node->hlist);
++ } else if (node_vma->key != key) {
++ if (node_vma->key < key)
++ hlist_add_behind(&new_node_vma->hlist, &node_vma->hlist);
++ else {
++ hlist_add_before(&new_node_vma->hlist,
++ &node_vma->hlist);
++ }
++
++ }
++ node_vma = new_node_vma;
++
++node_vma_ok: /* ok, ready to add to the list */
++ rmap_item->head = node_vma;
++ hlist_add_head(&rmap_item->hlist, &node_vma->rmap_hlist);
++ hold_anon_vma(rmap_item, rmap_item->slot->vma->anon_vma);
++ if (logdedup) {
++ rmap_item->slot->pages_merged++;
++ if (node_vma_cont) {
++ node_vma = node_vma_cont;
++ hlist_for_each_entry_continue(node_vma, hlist) {
++ node_vma->slot->pages_bemerged += factor;
++ if (list_empty(&node_vma->slot->dedup_list))
++ list_add(&node_vma->slot->dedup_list,
++ &vma_slot_dedup);
++ }
++ }
++ }
++}
++
++/*
++ * We use break_ksm to break COW on a ksm page: it's a stripped down
++ *
++ * if (get_user_pages(addr, 1, 1, 1, &page, NULL) == 1)
++ * put_page(page);
++ *
++ * but taking great care only to touch a ksm page, in a VM_MERGEABLE vma,
++ * in case the application has unmapped and remapped mm,addr meanwhile.
++ * Could a ksm page appear anywhere else? Actually yes, in a VM_PFNMAP
++ * mmap of /dev/mem or /dev/kmem, where we would not want to touch it.
++ */
++static int break_ksm(struct vm_area_struct *vma, unsigned long addr)
++{
++ struct page *page;
++ int ret = 0;
++
++ do {
++ cond_resched();
++ page = follow_page(vma, addr, FOLL_GET | FOLL_MIGRATION | FOLL_REMOTE);
++ if (IS_ERR_OR_NULL(page))
++ break;
++ if (PageKsm(page)) {
++ ret = handle_mm_fault(vma, addr,
++ FAULT_FLAG_WRITE | FAULT_FLAG_REMOTE);
++ } else
++ ret = VM_FAULT_WRITE;
++ put_page(page);
++ } while (!(ret & (VM_FAULT_WRITE | VM_FAULT_SIGBUS | VM_FAULT_SIGSEGV | VM_FAULT_OOM)));
++ /*
++ * We must loop because handle_mm_fault() may back out if there's
++ * any difficulty e.g. if pte accessed bit gets updated concurrently.
++ *
++ * VM_FAULT_WRITE is what we have been hoping for: it indicates that
++ * COW has been broken, even if the vma does not permit VM_WRITE;
++ * but note that a concurrent fault might break PageKsm for us.
++ *
++ * VM_FAULT_SIGBUS could occur if we race with truncation of the
++ * backing file, which also invalidates anonymous pages: that's
++ * okay, that truncation will have unmapped the PageKsm for us.
++ *
++ * VM_FAULT_OOM: at the time of writing (late July 2009), setting
++ * aside mem_cgroup limits, VM_FAULT_OOM would only be set if the
++ * current task has TIF_MEMDIE set, and will be OOM killed on return
++ * to user; and ksmd, having no mm, would never be chosen for that.
++ *
++ * But if the mm is in a limited mem_cgroup, then the fault may fail
++ * with VM_FAULT_OOM even if the current task is not TIF_MEMDIE; and
++ * even ksmd can fail in this way - though it's usually breaking ksm
++ * just to undo a merge it made a moment before, so unlikely to oom.
++ *
++ * That's a pity: we might therefore have more kernel pages allocated
++ * than we're counting as nodes in the stable tree; but uksm_do_scan
++ * will retry to break_cow on each pass, so should recover the page
++ * in due course. The important thing is to not let VM_MERGEABLE
++ * be cleared while any such pages might remain in the area.
++ */
++ return (ret & VM_FAULT_OOM) ? -ENOMEM : 0;
++}
++
++static void break_cow(struct rmap_item *rmap_item)
++{
++ struct vm_area_struct *vma = rmap_item->slot->vma;
++ struct mm_struct *mm = vma->vm_mm;
++ unsigned long addr = get_rmap_addr(rmap_item);
++
++ if (uksm_test_exit(mm))
++ goto out;
++
++ break_ksm(vma, addr);
++out:
++ return;
++}
++
++/*
++ * Though it's very tempting to unmerge in_stable_tree(rmap_item)s rather
++ * than check every pte of a given vma, the locking doesn't quite work for
++ * that - an rmap_item is assigned to the stable tree after inserting ksm
++ * page and upping mmap_sem. Nor does it fit with the way we skip dup'ing
++ * rmap_items from parent to child at fork time (so as not to waste time
++ * if exit comes before the next scan reaches it).
++ *
++ * Similarly, although we'd like to remove rmap_items (so updating counts
++ * and freeing memory) when unmerging an area, it's easier to leave that
++ * to the next pass of ksmd - consider, for example, how ksmd might be
++ * in cmp_and_merge_page on one of the rmap_items we would be removing.
++ */
++inline int unmerge_uksm_pages(struct vm_area_struct *vma,
++ unsigned long start, unsigned long end)
++{
++ unsigned long addr;
++ int err = 0;
++
++ for (addr = start; addr < end && !err; addr += PAGE_SIZE) {
++ if (uksm_test_exit(vma->vm_mm))
++ break;
++ if (signal_pending(current))
++ err = -ERESTARTSYS;
++ else
++ err = break_ksm(vma, addr);
++ }
++ return err;
++}
++
++static inline void inc_uksm_pages_scanned(void)
++{
++ u64 delta;
++
++
++ if (uksm_pages_scanned == U64_MAX) {
++ encode_benefit();
++
++ delta = uksm_pages_scanned >> pages_scanned_base;
++
++ if (CAN_OVERFLOW_U64(pages_scanned_stored, delta)) {
++ pages_scanned_stored >>= 1;
++ delta >>= 1;
++ pages_scanned_base++;
++ }
++
++ pages_scanned_stored += delta;
++
++ uksm_pages_scanned = uksm_pages_scanned_last = 0;
++ }
++
++ uksm_pages_scanned++;
++}
++
++static inline int find_zero_page_hash(int strength, u32 hash)
++{
++ return (zero_hash_table[strength] == hash);
++}
++
++static
++int cmp_and_merge_zero_page(struct vm_area_struct *vma, struct page *page)
++{
++ struct page *zero_page = empty_uksm_zero_page;
++ struct mm_struct *mm = vma->vm_mm;
++ pte_t orig_pte = __pte(0);
++ int err = -EFAULT;
++
++ if (uksm_test_exit(mm))
++ goto out;
++
++ if (!trylock_page(page))
++ goto out;
++
++ if (!PageAnon(page))
++ goto out_unlock;
++
++ if (PageTransCompound(page)) {
++ err = split_huge_page(page);
++ if (err)
++ goto out_unlock;
++ }
++
++ if (write_protect_page(vma, page, &orig_pte, 0) == 0) {
++ if (is_page_full_zero(page))
++ err = replace_page(vma, page, zero_page, orig_pte);
++ }
++
++out_unlock:
++ unlock_page(page);
++out:
++ return err;
++}
++
++/*
++ * cmp_and_merge_page() - first see if page can be merged into the stable
++ * tree; if not, compare hash to previous and if it's the same, see if page
++ * can be inserted into the unstable tree, or merged with a page already there
++ * and both transferred to the stable tree.
++ *
++ * @page: the page that we are searching identical page to.
++ * @rmap_item: the reverse mapping into the virtual address of this page
++ */
++static void cmp_and_merge_page(struct rmap_item *rmap_item, u32 hash)
++{
++ struct rmap_item *tree_rmap_item;
++ struct page *page;
++ struct page *kpage = NULL;
++ u32 hash_max;
++ int err;
++ unsigned int success1, success2;
++ struct stable_node *snode;
++ int cmp;
++ struct rb_node *parent = NULL, **new;
++
++ remove_rmap_item_from_tree(rmap_item);
++ page = rmap_item->page;
++
++ /* We first start with searching the page inside the stable tree */
++ kpage = stable_tree_search(rmap_item, hash);
++ if (kpage) {
++ err = try_to_merge_with_uksm_page(rmap_item, kpage,
++ hash);
++ if (!err) {
++ /*
++ * The page was successfully merged, add
++ * its rmap_item to the stable tree.
++ * page lock is needed because it's
++ * racing with try_to_unmap_ksm(), etc.
++ */
++ lock_page(kpage);
++ snode = page_stable_node(kpage);
++ stable_tree_append(rmap_item, snode, 1);
++ unlock_page(kpage);
++ put_page(kpage);
++ return; /* success */
++ }
++ put_page(kpage);
++
++ /*
++ * if it's a collision and it has been search in sub-rbtree
++ * (hash_max != 0), we want to abort, because if it is
++ * successfully merged in unstable tree, the collision trends to
++ * happen again.
++ */
++ if (err == MERGE_ERR_COLLI && rmap_item->hash_max)
++ return;
++ }
++
++ tree_rmap_item =
++ unstable_tree_search_insert(rmap_item, hash);
++ if (tree_rmap_item) {
++ err = try_to_merge_two_pages(rmap_item, tree_rmap_item, hash);
++ /*
++ * As soon as we merge this page, we want to remove the
++ * rmap_item of the page we have merged with from the unstable
++ * tree, and insert it instead as new node in the stable tree.
++ */
++ if (!err) {
++ kpage = page;
++ remove_rmap_item_from_tree(tree_rmap_item);
++ lock_page(kpage);
++ snode = stable_tree_insert(&kpage, hash,
++ rmap_item, tree_rmap_item,
++ &success1, &success2);
++
++ /*
++ * Do not log dedup for tree item, it's not counted as
++ * scanned in this round.
++ */
++ if (success2)
++ stable_tree_append(tree_rmap_item, snode, 0);
++
++ /*
++ * The order of these two stable append is important:
++ * we are scanning rmap_item.
++ */
++ if (success1)
++ stable_tree_append(rmap_item, snode, 1);
++
++ /*
++ * The original kpage may be unlocked inside
++ * stable_tree_insert() already. This page
++ * should be unlocked before doing
++ * break_cow().
++ */
++ unlock_page(kpage);
++
++ if (!success1)
++ break_cow(rmap_item);
++
++ if (!success2)
++ break_cow(tree_rmap_item);
++
++ } else if (err == MERGE_ERR_COLLI) {
++ BUG_ON(tree_rmap_item->tree_node->count > 1);
++
++ rmap_item_hash_max(tree_rmap_item,
++ tree_rmap_item->tree_node->hash);
++
++ hash_max = rmap_item_hash_max(rmap_item, hash);
++ cmp = hash_cmp(hash_max, tree_rmap_item->hash_max);
++ parent = &tree_rmap_item->node;
++ if (cmp < 0)
++ new = &parent->rb_left;
++ else if (cmp > 0)
++ new = &parent->rb_right;
++ else
++ goto put_up_out;
++
++ rmap_item->tree_node = tree_rmap_item->tree_node;
++ rmap_item->address |= UNSTABLE_FLAG;
++ rmap_item->hash_round = uksm_hash_round;
++ rb_link_node(&rmap_item->node, parent, new);
++ rb_insert_color(&rmap_item->node,
++ &tree_rmap_item->tree_node->sub_root);
++ rmap_item->tree_node->count++;
++ } else {
++ /*
++ * either one of the page has changed or they collide
++ * at the max hash, we consider them as ill items.
++ */
++ remove_rmap_item_from_tree(tree_rmap_item);
++ }
++put_up_out:
++ put_page(tree_rmap_item->page);
++ up_read(&tree_rmap_item->slot->vma->vm_mm->mmap_sem);
++ }
++}
++
++
++
++
++static inline unsigned long get_pool_index(struct vma_slot *slot,
++ unsigned long index)
++{
++ unsigned long pool_index;
++
++ pool_index = (sizeof(struct rmap_list_entry *) * index) >> PAGE_SHIFT;
++ if (pool_index >= slot->pool_size)
++ BUG();
++ return pool_index;
++}
++
++static inline unsigned long index_page_offset(unsigned long index)
++{
++ return offset_in_page(sizeof(struct rmap_list_entry *) * index);
++}
++
++static inline
++struct rmap_list_entry *get_rmap_list_entry(struct vma_slot *slot,
++ unsigned long index, int need_alloc)
++{
++ unsigned long pool_index;
++ struct page *page;
++ void *addr;
++
++
++ pool_index = get_pool_index(slot, index);
++ if (!slot->rmap_list_pool[pool_index]) {
++ if (!need_alloc)
++ return NULL;
++
++ page = alloc_page(GFP_KERNEL | __GFP_ZERO | __GFP_NOWARN);
++ if (!page)
++ return NULL;
++
++ slot->rmap_list_pool[pool_index] = page;
++ }
++
++ addr = kmap(slot->rmap_list_pool[pool_index]);
++ addr += index_page_offset(index);
++
++ return addr;
++}
++
++static inline void put_rmap_list_entry(struct vma_slot *slot,
++ unsigned long index)
++{
++ unsigned long pool_index;
++
++ pool_index = get_pool_index(slot, index);
++ BUG_ON(!slot->rmap_list_pool[pool_index]);
++ kunmap(slot->rmap_list_pool[pool_index]);
++}
++
++static inline int entry_is_new(struct rmap_list_entry *entry)
++{
++ return !entry->item;
++}
++
++static inline unsigned long get_index_orig_addr(struct vma_slot *slot,
++ unsigned long index)
++{
++ return slot->vma->vm_start + (index << PAGE_SHIFT);
++}
++
++static inline unsigned long get_entry_address(struct rmap_list_entry *entry)
++{
++ unsigned long addr;
++
++ if (is_addr(entry->addr))
++ addr = get_clean_addr(entry->addr);
++ else if (entry->item)
++ addr = get_rmap_addr(entry->item);
++ else
++ BUG();
++
++ return addr;
++}
++
++static inline struct rmap_item *get_entry_item(struct rmap_list_entry *entry)
++{
++ if (is_addr(entry->addr))
++ return NULL;
++
++ return entry->item;
++}
++
++static inline void inc_rmap_list_pool_count(struct vma_slot *slot,
++ unsigned long index)
++{
++ unsigned long pool_index;
++
++ pool_index = get_pool_index(slot, index);
++ BUG_ON(!slot->rmap_list_pool[pool_index]);
++ slot->pool_counts[pool_index]++;
++}
++
++static inline void dec_rmap_list_pool_count(struct vma_slot *slot,
++ unsigned long index)
++{
++ unsigned long pool_index;
++
++ pool_index = get_pool_index(slot, index);
++ BUG_ON(!slot->rmap_list_pool[pool_index]);
++ BUG_ON(!slot->pool_counts[pool_index]);
++ slot->pool_counts[pool_index]--;
++}
++
++static inline int entry_has_rmap(struct rmap_list_entry *entry)
++{
++ return !is_addr(entry->addr) && entry->item;
++}
++
++static inline void swap_entries(struct rmap_list_entry *entry1,
++ unsigned long index1,
++ struct rmap_list_entry *entry2,
++ unsigned long index2)
++{
++ struct rmap_list_entry tmp;
++
++ /* swapping two new entries is meaningless */
++ BUG_ON(entry_is_new(entry1) && entry_is_new(entry2));
++
++ tmp = *entry1;
++ *entry1 = *entry2;
++ *entry2 = tmp;
++
++ if (entry_has_rmap(entry1))
++ entry1->item->entry_index = index1;
++
++ if (entry_has_rmap(entry2))
++ entry2->item->entry_index = index2;
++
++ if (entry_has_rmap(entry1) && !entry_has_rmap(entry2)) {
++ inc_rmap_list_pool_count(entry1->item->slot, index1);
++ dec_rmap_list_pool_count(entry1->item->slot, index2);
++ } else if (!entry_has_rmap(entry1) && entry_has_rmap(entry2)) {
++ inc_rmap_list_pool_count(entry2->item->slot, index2);
++ dec_rmap_list_pool_count(entry2->item->slot, index1);
++ }
++}
++
++static inline void free_entry_item(struct rmap_list_entry *entry)
++{
++ unsigned long index;
++ struct rmap_item *item;
++
++ if (!is_addr(entry->addr)) {
++ BUG_ON(!entry->item);
++ item = entry->item;
++ entry->addr = get_rmap_addr(item);
++ set_is_addr(entry->addr);
++ index = item->entry_index;
++ remove_rmap_item_from_tree(item);
++ dec_rmap_list_pool_count(item->slot, index);
++ free_rmap_item(item);
++ }
++}
++
++static inline int pool_entry_boundary(unsigned long index)
++{
++ unsigned long linear_addr;
++
++ linear_addr = sizeof(struct rmap_list_entry *) * index;
++ return index && !offset_in_page(linear_addr);
++}
++
++static inline void try_free_last_pool(struct vma_slot *slot,
++ unsigned long index)
++{
++ unsigned long pool_index;
++
++ pool_index = get_pool_index(slot, index);
++ if (slot->rmap_list_pool[pool_index] &&
++ !slot->pool_counts[pool_index]) {
++ __free_page(slot->rmap_list_pool[pool_index]);
++ slot->rmap_list_pool[pool_index] = NULL;
++ slot->flags |= UKSM_SLOT_NEED_SORT;
++ }
++
++}
++
++static inline unsigned long vma_item_index(struct vm_area_struct *vma,
++ struct rmap_item *item)
++{
++ return (get_rmap_addr(item) - vma->vm_start) >> PAGE_SHIFT;
++}
++
++static int within_same_pool(struct vma_slot *slot,
++ unsigned long i, unsigned long j)
++{
++ unsigned long pool_i, pool_j;
++
++ pool_i = get_pool_index(slot, i);
++ pool_j = get_pool_index(slot, j);
++
++ return (pool_i == pool_j);
++}
++
++static void sort_rmap_entry_list(struct vma_slot *slot)
++{
++ unsigned long i, j;
++ struct rmap_list_entry *entry, *swap_entry;
++
++ entry = get_rmap_list_entry(slot, 0, 0);
++ for (i = 0; i < slot->pages; ) {
++
++ if (!entry)
++ goto skip_whole_pool;
++
++ if (entry_is_new(entry))
++ goto next_entry;
++
++ if (is_addr(entry->addr)) {
++ entry->addr = 0;
++ goto next_entry;
++ }
++
++ j = vma_item_index(slot->vma, entry->item);
++ if (j == i)
++ goto next_entry;
++
++ if (within_same_pool(slot, i, j))
++ swap_entry = entry + j - i;
++ else
++ swap_entry = get_rmap_list_entry(slot, j, 1);
++
++ swap_entries(entry, i, swap_entry, j);
++ if (!within_same_pool(slot, i, j))
++ put_rmap_list_entry(slot, j);
++ continue;
++
++skip_whole_pool:
++ i += PAGE_SIZE / sizeof(*entry);
++ if (i < slot->pages)
++ entry = get_rmap_list_entry(slot, i, 0);
++ continue;
++
++next_entry:
++ if (i >= slot->pages - 1 ||
++ !within_same_pool(slot, i, i + 1)) {
++ put_rmap_list_entry(slot, i);
++ if (i + 1 < slot->pages)
++ entry = get_rmap_list_entry(slot, i + 1, 0);
++ } else
++ entry++;
++ i++;
++ continue;
++ }
++
++ /* free empty pool entries which contain no rmap_item */
++ /* CAN be simplied to based on only pool_counts when bug freed !!!!! */
++ for (i = 0; i < slot->pool_size; i++) {
++ unsigned char has_rmap;
++ void *addr;
++
++ if (!slot->rmap_list_pool[i])
++ continue;
++
++ has_rmap = 0;
++ addr = kmap(slot->rmap_list_pool[i]);
++ BUG_ON(!addr);
++ for (j = 0; j < PAGE_SIZE / sizeof(*entry); j++) {
++ entry = (struct rmap_list_entry *)addr + j;
++ if (is_addr(entry->addr))
++ continue;
++ if (!entry->item)
++ continue;
++ has_rmap = 1;
++ }
++ kunmap(slot->rmap_list_pool[i]);
++ if (!has_rmap) {
++ BUG_ON(slot->pool_counts[i]);
++ __free_page(slot->rmap_list_pool[i]);
++ slot->rmap_list_pool[i] = NULL;
++ }
++ }
++
++ slot->flags &= ~UKSM_SLOT_NEED_SORT;
++}
++
++/*
++ * vma_fully_scanned() - if all the pages in this slot have been scanned.
++ */
++static inline int vma_fully_scanned(struct vma_slot *slot)
++{
++ return slot->pages_scanned == slot->pages;
++}
++
++/**
++ * get_next_rmap_item() - Get the next rmap_item in a vma_slot according to
++ * its random permutation. This function is embedded with the random
++ * permutation index management code.
++ */
++static struct rmap_item *get_next_rmap_item(struct vma_slot *slot, u32 *hash)
++{
++ unsigned long rand_range, addr, swap_index, scan_index;
++ struct rmap_item *item = NULL;
++ struct rmap_list_entry *scan_entry, *swap_entry = NULL;
++ struct page *page;
++
++ scan_index = swap_index = slot->pages_scanned % slot->pages;
++
++ if (pool_entry_boundary(scan_index))
++ try_free_last_pool(slot, scan_index - 1);
++
++ if (vma_fully_scanned(slot)) {
++ if (slot->flags & UKSM_SLOT_NEED_SORT)
++ slot->flags |= UKSM_SLOT_NEED_RERAND;
++ else
++ slot->flags &= ~UKSM_SLOT_NEED_RERAND;
++ if (slot->flags & UKSM_SLOT_NEED_SORT)
++ sort_rmap_entry_list(slot);
++ }
++
++ scan_entry = get_rmap_list_entry(slot, scan_index, 1);
++ if (!scan_entry)
++ return NULL;
++
++ if (entry_is_new(scan_entry)) {
++ scan_entry->addr = get_index_orig_addr(slot, scan_index);
++ set_is_addr(scan_entry->addr);
++ }
++
++ if (slot->flags & UKSM_SLOT_NEED_RERAND) {
++ rand_range = slot->pages - scan_index;
++ BUG_ON(!rand_range);
++ swap_index = scan_index + (prandom_u32() % rand_range);
++ }
++
++ if (swap_index != scan_index) {
++ swap_entry = get_rmap_list_entry(slot, swap_index, 1);
++ if (entry_is_new(swap_entry)) {
++ swap_entry->addr = get_index_orig_addr(slot,
++ swap_index);
++ set_is_addr(swap_entry->addr);
++ }
++ swap_entries(scan_entry, scan_index, swap_entry, swap_index);
++ }
++
++ addr = get_entry_address(scan_entry);
++ item = get_entry_item(scan_entry);
++ BUG_ON(addr > slot->vma->vm_end || addr < slot->vma->vm_start);
++
++ page = follow_page(slot->vma, addr, FOLL_GET);
++ if (IS_ERR_OR_NULL(page))
++ goto nopage;
++
++ if (!PageAnon(page))
++ goto putpage;
++
++ /*check is zero_page pfn or uksm_zero_page*/
++ if ((page_to_pfn(page) == zero_pfn)
++ || (page_to_pfn(page) == uksm_zero_pfn))
++ goto putpage;
++
++ flush_anon_page(slot->vma, page, addr);
++ flush_dcache_page(page);
++
++
++ *hash = page_hash(page, hash_strength, 1);
++ inc_uksm_pages_scanned();
++ /*if the page content all zero, re-map to zero-page*/
++ if (find_zero_page_hash(hash_strength, *hash)) {
++ if (!cmp_and_merge_zero_page(slot->vma, page)) {
++ slot->pages_merged++;
++
++ /* For full-zero pages, no need to create rmap item */
++ goto putpage;
++ } else {
++ inc_rshash_neg(memcmp_cost / 2);
++ }
++ }
++
++ if (!item) {
++ item = alloc_rmap_item();
++ if (item) {
++ /* It has already been zeroed */
++ item->slot = slot;
++ item->address = addr;
++ item->entry_index = scan_index;
++ scan_entry->item = item;
++ inc_rmap_list_pool_count(slot, scan_index);
++ } else
++ goto putpage;
++ }
++
++ BUG_ON(item->slot != slot);
++ /* the page may have changed */
++ item->page = page;
++ put_rmap_list_entry(slot, scan_index);
++ if (swap_entry)
++ put_rmap_list_entry(slot, swap_index);
++ return item;
++
++putpage:
++ put_page(page);
++ page = NULL;
++nopage:
++ /* no page, store addr back and free rmap_item if possible */
++ free_entry_item(scan_entry);
++ put_rmap_list_entry(slot, scan_index);
++ if (swap_entry)
++ put_rmap_list_entry(slot, swap_index);
++ return NULL;
++}
++
++static inline int in_stable_tree(struct rmap_item *rmap_item)
++{
++ return rmap_item->address & STABLE_FLAG;
++}
++
++/**
++ * scan_vma_one_page() - scan the next page in a vma_slot. Called with
++ * mmap_sem locked.
++ */
++static noinline void scan_vma_one_page(struct vma_slot *slot)
++{
++ u32 hash;
++ struct mm_struct *mm;
++ struct rmap_item *rmap_item = NULL;
++ struct vm_area_struct *vma = slot->vma;
++
++ mm = vma->vm_mm;
++ BUG_ON(!mm);
++ BUG_ON(!slot);
++
++ rmap_item = get_next_rmap_item(slot, &hash);
++ if (!rmap_item)
++ goto out1;
++
++ if (PageKsm(rmap_item->page) && in_stable_tree(rmap_item))
++ goto out2;
++
++ cmp_and_merge_page(rmap_item, hash);
++out2:
++ put_page(rmap_item->page);
++out1:
++ slot->pages_scanned++;
++ slot->this_sampled++;
++ if (slot->fully_scanned_round != fully_scanned_round)
++ scanned_virtual_pages++;
++
++ if (vma_fully_scanned(slot))
++ slot->fully_scanned_round = fully_scanned_round;
++}
++
++static inline unsigned long rung_get_pages(struct scan_rung *rung)
++{
++ struct slot_tree_node *node;
++
++ if (!rung->vma_root.rnode)
++ return 0;
++
++ node = container_of(rung->vma_root.rnode, struct slot_tree_node, snode);
++
++ return node->size;
++}
++
++#define RUNG_SAMPLED_MIN 3
++
++static inline
++void uksm_calc_rung_step(struct scan_rung *rung,
++ unsigned long page_time, unsigned long ratio)
++{
++ unsigned long sampled, pages;
++
++ /* will be fully scanned ? */
++ if (!rung->cover_msecs) {
++ rung->step = 1;
++ return;
++ }
++
++ sampled = rung->cover_msecs * (NSEC_PER_MSEC / TIME_RATIO_SCALE)
++ * ratio / page_time;
++
++ /*
++ * Before we finsish a scan round and expensive per-round jobs,
++ * we need to have a chance to estimate the per page time. So
++ * the sampled number can not be too small.
++ */
++ if (sampled < RUNG_SAMPLED_MIN)
++ sampled = RUNG_SAMPLED_MIN;
++
++ pages = rung_get_pages(rung);
++ if (likely(pages > sampled))
++ rung->step = pages / sampled;
++ else
++ rung->step = 1;
++}
++
++static inline int step_need_recalc(struct scan_rung *rung)
++{
++ unsigned long pages, stepmax;
++
++ pages = rung_get_pages(rung);
++ stepmax = pages / RUNG_SAMPLED_MIN;
++
++ return pages && (rung->step > pages ||
++ (stepmax && rung->step > stepmax));
++}
++
++static inline
++void reset_current_scan(struct scan_rung *rung, int finished, int step_recalc)
++{
++ struct vma_slot *slot;
++
++ if (finished)
++ rung->flags |= UKSM_RUNG_ROUND_FINISHED;
++
++ if (step_recalc || step_need_recalc(rung)) {
++ uksm_calc_rung_step(rung, uksm_ema_page_time, rung->cpu_ratio);
++ BUG_ON(step_need_recalc(rung));
++ }
++
++ slot_iter_index = prandom_u32() % rung->step;
++ BUG_ON(!rung->vma_root.rnode);
++ slot = sradix_tree_next(&rung->vma_root, NULL, 0, slot_iter);
++ BUG_ON(!slot);
++
++ rung->current_scan = slot;
++ rung->current_offset = slot_iter_index;
++}
++
++static inline struct sradix_tree_root *slot_get_root(struct vma_slot *slot)
++{
++ return &slot->rung->vma_root;
++}
++
++/*
++ * return if resetted.
++ */
++static int advance_current_scan(struct scan_rung *rung)
++{
++ unsigned short n;
++ struct vma_slot *slot, *next = NULL;
++
++ BUG_ON(!rung->vma_root.num);
++
++ slot = rung->current_scan;
++ n = (slot->pages - rung->current_offset) % rung->step;
++ slot_iter_index = rung->step - n;
++ next = sradix_tree_next(&rung->vma_root, slot->snode,
++ slot->sindex, slot_iter);
++
++ if (next) {
++ rung->current_offset = slot_iter_index;
++ rung->current_scan = next;
++ return 0;
++ } else {
++ reset_current_scan(rung, 1, 0);
++ return 1;
++ }
++}
++
++static inline void rung_rm_slot(struct vma_slot *slot)
++{
++ struct scan_rung *rung = slot->rung;
++ struct sradix_tree_root *root;
++
++ if (rung->current_scan == slot)
++ advance_current_scan(rung);
++
++ root = slot_get_root(slot);
++ sradix_tree_delete_from_leaf(root, slot->snode, slot->sindex);
++ slot->snode = NULL;
++ if (step_need_recalc(rung)) {
++ uksm_calc_rung_step(rung, uksm_ema_page_time, rung->cpu_ratio);
++ BUG_ON(step_need_recalc(rung));
++ }
++
++ /* In case advance_current_scan loop back to this slot again */
++ if (rung->vma_root.num && rung->current_scan == slot)
++ reset_current_scan(slot->rung, 1, 0);
++}
++
++static inline void rung_add_new_slots(struct scan_rung *rung,
++ struct vma_slot **slots, unsigned long num)
++{
++ int err;
++ struct vma_slot *slot;
++ unsigned long i;
++ struct sradix_tree_root *root = &rung->vma_root;
++
++ err = sradix_tree_enter(root, (void **)slots, num);
++ BUG_ON(err);
++
++ for (i = 0; i < num; i++) {
++ slot = slots[i];
++ slot->rung = rung;
++ BUG_ON(vma_fully_scanned(slot));
++ }
++
++ if (rung->vma_root.num == num)
++ reset_current_scan(rung, 0, 1);
++}
++
++static inline int rung_add_one_slot(struct scan_rung *rung,
++ struct vma_slot *slot)
++{
++ int err;
++
++ err = sradix_tree_enter(&rung->vma_root, (void **)&slot, 1);
++ if (err)
++ return err;
++
++ slot->rung = rung;
++ if (rung->vma_root.num == 1)
++ reset_current_scan(rung, 0, 1);
++
++ return 0;
++}
++
++/*
++ * Return true if the slot is deleted from its rung.
++ */
++static inline int vma_rung_enter(struct vma_slot *slot, struct scan_rung *rung)
++{
++ struct scan_rung *old_rung = slot->rung;
++ int err;
++
++ if (old_rung == rung)
++ return 0;
++
++ rung_rm_slot(slot);
++ err = rung_add_one_slot(rung, slot);
++ if (err) {
++ err = rung_add_one_slot(old_rung, slot);
++ WARN_ON(err); /* OOPS, badly OOM, we lost this slot */
++ }
++
++ return 1;
++}
++
++static inline int vma_rung_up(struct vma_slot *slot)
++{
++ struct scan_rung *rung;
++
++ rung = slot->rung;
++ if (slot->rung != &uksm_scan_ladder[SCAN_LADDER_SIZE-1])
++ rung++;
++
++ return vma_rung_enter(slot, rung);
++}
++
++static inline int vma_rung_down(struct vma_slot *slot)
++{
++ struct scan_rung *rung;
++
++ rung = slot->rung;
++ if (slot->rung != &uksm_scan_ladder[0])
++ rung--;
++
++ return vma_rung_enter(slot, rung);
++}
++
++/**
++ * cal_dedup_ratio() - Calculate the deduplication ratio for this slot.
++ */
++static unsigned long cal_dedup_ratio(struct vma_slot *slot)
++{
++ unsigned long ret;
++ unsigned long pages;
++
++ pages = slot->this_sampled;
++ if (!pages)
++ return 0;
++
++ BUG_ON(slot->pages_scanned == slot->last_scanned);
++
++ ret = slot->pages_merged;
++
++ /* Thrashing area filtering */
++ if (ret && uksm_thrash_threshold) {
++ if (slot->pages_cowed * 100 / slot->pages_merged
++ > uksm_thrash_threshold) {
++ ret = 0;
++ } else {
++ ret = slot->pages_merged - slot->pages_cowed;
++ }
++ }
++
++ return ret * 100 / pages;
++}
++
++/**
++ * cal_dedup_ratio() - Calculate the deduplication ratio for this slot.
++ */
++static unsigned long cal_dedup_ratio_old(struct vma_slot *slot)
++{
++ unsigned long ret;
++ unsigned long pages;
++
++ pages = slot->pages;
++ if (!pages)
++ return 0;
++
++ ret = slot->pages_bemerged;
++
++ /* Thrashing area filtering */
++ if (ret && uksm_thrash_threshold) {
++ if (slot->pages_cowed * 100 / slot->pages_bemerged
++ > uksm_thrash_threshold) {
++ ret = 0;
++ } else {
++ ret = slot->pages_bemerged - slot->pages_cowed;
++ }
++ }
++
++ return ret * 100 / pages;
++}
++
++/**
++ * stable_node_reinsert() - When the hash_strength has been adjusted, the
++ * stable tree need to be restructured, this is the function re-inserting the
++ * stable node.
++ */
++static inline void stable_node_reinsert(struct stable_node *new_node,
++ struct page *page,
++ struct rb_root *root_treep,
++ struct list_head *tree_node_listp,
++ u32 hash)
++{
++ struct rb_node **new = &root_treep->rb_node;
++ struct rb_node *parent = NULL;
++ struct stable_node *stable_node;
++ struct tree_node *tree_node;
++ struct page *tree_page;
++ int cmp;
++
++ while (*new) {
++ int cmp;
++
++ tree_node = rb_entry(*new, struct tree_node, node);
++
++ cmp = hash_cmp(hash, tree_node->hash);
++
++ if (cmp < 0) {
++ parent = *new;
++ new = &parent->rb_left;
++ } else if (cmp > 0) {
++ parent = *new;
++ new = &parent->rb_right;
++ } else
++ break;
++ }
++
++ if (*new) {
++ /* find a stable tree node with same first level hash value */
++ stable_node_hash_max(new_node, page, hash);
++ if (tree_node->count == 1) {
++ stable_node = rb_entry(tree_node->sub_root.rb_node,
++ struct stable_node, node);
++ tree_page = get_uksm_page(stable_node, 1, 0);
++ if (tree_page) {
++ stable_node_hash_max(stable_node,
++ tree_page, hash);
++ put_page(tree_page);
++
++ /* prepare for stable node insertion */
++
++ cmp = hash_cmp(new_node->hash_max,
++ stable_node->hash_max);
++ parent = &stable_node->node;
++ if (cmp < 0)
++ new = &parent->rb_left;
++ else if (cmp > 0)
++ new = &parent->rb_right;
++ else
++ goto failed;
++
++ goto add_node;
++ } else {
++ /* the only stable_node deleted, the tree node
++ * was not deleted.
++ */
++ goto tree_node_reuse;
++ }
++ }
++
++ /* well, search the collision subtree */
++ new = &tree_node->sub_root.rb_node;
++ parent = NULL;
++ BUG_ON(!*new);
++ while (*new) {
++ int cmp;
++
++ stable_node = rb_entry(*new, struct stable_node, node);
++
++ cmp = hash_cmp(new_node->hash_max,
++ stable_node->hash_max);
++
++ if (cmp < 0) {
++ parent = *new;
++ new = &parent->rb_left;
++ } else if (cmp > 0) {
++ parent = *new;
++ new = &parent->rb_right;
++ } else {
++ /* oh, no, still a collision */
++ goto failed;
++ }
++ }
++
++ goto add_node;
++ }
++
++ /* no tree node found */
++ tree_node = alloc_tree_node(tree_node_listp);
++ if (!tree_node) {
++ pr_err("UKSM: memory allocation error!\n");
++ goto failed;
++ } else {
++ tree_node->hash = hash;
++ rb_link_node(&tree_node->node, parent, new);
++ rb_insert_color(&tree_node->node, root_treep);
++
++tree_node_reuse:
++ /* prepare for stable node insertion */
++ parent = NULL;
++ new = &tree_node->sub_root.rb_node;
++ }
++
++add_node:
++ rb_link_node(&new_node->node, parent, new);
++ rb_insert_color(&new_node->node, &tree_node->sub_root);
++ new_node->tree_node = tree_node;
++ tree_node->count++;
++ return;
++
++failed:
++ /* This can only happen when two nodes have collided
++ * in two levels.
++ */
++ new_node->tree_node = NULL;
++ return;
++}
++
++static inline void free_all_tree_nodes(struct list_head *list)
++{
++ struct tree_node *node, *tmp;
++
++ list_for_each_entry_safe(node, tmp, list, all_list) {
++ free_tree_node(node);
++ }
++}
++
++/**
++ * stable_tree_delta_hash() - Delta hash the stable tree from previous hash
++ * strength to the current hash_strength. It re-structures the hole tree.
++ */
++static inline void stable_tree_delta_hash(u32 prev_hash_strength)
++{
++ struct stable_node *node, *tmp;
++ struct rb_root *root_new_treep;
++ struct list_head *new_tree_node_listp;
++
++ stable_tree_index = (stable_tree_index + 1) % 2;
++ root_new_treep = &root_stable_tree[stable_tree_index];
++ new_tree_node_listp = &stable_tree_node_list[stable_tree_index];
++ *root_new_treep = RB_ROOT;
++ BUG_ON(!list_empty(new_tree_node_listp));
++
++ /*
++ * we need to be safe, the node could be removed by get_uksm_page()
++ */
++ list_for_each_entry_safe(node, tmp, &stable_node_list, all_list) {
++ void *addr;
++ struct page *node_page;
++ u32 hash;
++
++ /*
++ * We are completely re-structuring the stable nodes to a new
++ * stable tree. We don't want to touch the old tree unlinks and
++ * old tree_nodes. The old tree_nodes will be freed at once.
++ */
++ node_page = get_uksm_page(node, 0, 0);
++ if (!node_page)
++ continue;
++
++ if (node->tree_node) {
++ hash = node->tree_node->hash;
++
++ addr = kmap_atomic(node_page);
++
++ hash = delta_hash(addr, prev_hash_strength,
++ hash_strength, hash);
++ kunmap_atomic(addr);
++ } else {
++ /*
++ *it was not inserted to rbtree due to collision in last
++ *round scan.
++ */
++ hash = page_hash(node_page, hash_strength, 0);
++ }
++
++ stable_node_reinsert(node, node_page, root_new_treep,
++ new_tree_node_listp, hash);
++ put_page(node_page);
++ }
++
++ root_stable_treep = root_new_treep;
++ free_all_tree_nodes(stable_tree_node_listp);
++ BUG_ON(!list_empty(stable_tree_node_listp));
++ stable_tree_node_listp = new_tree_node_listp;
++}
++
++static inline void inc_hash_strength(unsigned long delta)
++{
++ hash_strength += 1 << delta;
++ if (hash_strength > HASH_STRENGTH_MAX)
++ hash_strength = HASH_STRENGTH_MAX;
++}
++
++static inline void dec_hash_strength(unsigned long delta)
++{
++ unsigned long change = 1 << delta;
++
++ if (hash_strength <= change + 1)
++ hash_strength = 1;
++ else
++ hash_strength -= change;
++}
++
++static inline void inc_hash_strength_delta(void)
++{
++ hash_strength_delta++;
++ if (hash_strength_delta > HASH_STRENGTH_DELTA_MAX)
++ hash_strength_delta = HASH_STRENGTH_DELTA_MAX;
++}
++
++static inline unsigned long get_current_neg_ratio(void)
++{
++ u64 pos = benefit.pos;
++ u64 neg = benefit.neg;
++
++ if (!neg)
++ return 0;
++
++ if (!pos || neg > pos)
++ return 100;
++
++ if (neg > div64_u64(U64_MAX, 100))
++ pos = div64_u64(pos, 100);
++ else
++ neg *= 100;
++
++ return div64_u64(neg, pos);
++}
++
++static inline unsigned long get_current_benefit(void)
++{
++ u64 pos = benefit.pos;
++ u64 neg = benefit.neg;
++ u64 scanned = benefit.scanned;
++
++ if (neg > pos)
++ return 0;
++
++ return div64_u64((pos - neg), scanned);
++}
++
++static inline int judge_rshash_direction(void)
++{
++ u64 current_neg_ratio, stable_benefit;
++ u64 current_benefit, delta = 0;
++ int ret = STILL;
++
++ /*
++ * Try to probe a value after the boot, and in case the system
++ * are still for a long time.
++ */
++ if ((fully_scanned_round & 0xFFULL) == 10) {
++ ret = OBSCURE;
++ goto out;
++ }
++
++ current_neg_ratio = get_current_neg_ratio();
++
++ if (current_neg_ratio == 0) {
++ rshash_neg_cont_zero++;
++ if (rshash_neg_cont_zero > 2)
++ return GO_DOWN;
++ else
++ return STILL;
++ }
++ rshash_neg_cont_zero = 0;
++
++ if (current_neg_ratio > 90) {
++ ret = GO_UP;
++ goto out;
++ }
++
++ current_benefit = get_current_benefit();
++ stable_benefit = rshash_state.stable_benefit;
++
++ if (!stable_benefit) {
++ ret = OBSCURE;
++ goto out;
++ }
++
++ if (current_benefit > stable_benefit)
++ delta = current_benefit - stable_benefit;
++ else if (current_benefit < stable_benefit)
++ delta = stable_benefit - current_benefit;
++
++ delta = div64_u64(100 * delta, stable_benefit);
++
++ if (delta > 50) {
++ rshash_cont_obscure++;
++ if (rshash_cont_obscure > 2)
++ return OBSCURE;
++ else
++ return STILL;
++ }
++
++out:
++ rshash_cont_obscure = 0;
++ return ret;
++}
++
++/**
++ * rshash_adjust() - The main function to control the random sampling state
++ * machine for hash strength adapting.
++ *
++ * return true if hash_strength has changed.
++ */
++static inline int rshash_adjust(void)
++{
++ unsigned long prev_hash_strength = hash_strength;
++
++ if (!encode_benefit())
++ return 0;
++
++ switch (rshash_state.state) {
++ case RSHASH_STILL:
++ switch (judge_rshash_direction()) {
++ case GO_UP:
++ if (rshash_state.pre_direct == GO_DOWN)
++ hash_strength_delta = 0;
++
++ inc_hash_strength(hash_strength_delta);
++ inc_hash_strength_delta();
++ rshash_state.stable_benefit = get_current_benefit();
++ rshash_state.pre_direct = GO_UP;
++ break;
++
++ case GO_DOWN:
++ if (rshash_state.pre_direct == GO_UP)
++ hash_strength_delta = 0;
++
++ dec_hash_strength(hash_strength_delta);
++ inc_hash_strength_delta();
++ rshash_state.stable_benefit = get_current_benefit();
++ rshash_state.pre_direct = GO_DOWN;
++ break;
++
++ case OBSCURE:
++ rshash_state.stable_point = hash_strength;
++ rshash_state.turn_point_down = hash_strength;
++ rshash_state.turn_point_up = hash_strength;
++ rshash_state.turn_benefit_down = get_current_benefit();
++ rshash_state.turn_benefit_up = get_current_benefit();
++ rshash_state.lookup_window_index = 0;
++ rshash_state.state = RSHASH_TRYDOWN;
++ dec_hash_strength(hash_strength_delta);
++ inc_hash_strength_delta();
++ break;
++
++ case STILL:
++ break;
++ default:
++ BUG();
++ }
++ break;
++
++ case RSHASH_TRYDOWN:
++ if (rshash_state.lookup_window_index++ % 5 == 0)
++ rshash_state.below_count = 0;
++
++ if (get_current_benefit() < rshash_state.stable_benefit)
++ rshash_state.below_count++;
++ else if (get_current_benefit() >
++ rshash_state.turn_benefit_down) {
++ rshash_state.turn_point_down = hash_strength;
++ rshash_state.turn_benefit_down = get_current_benefit();
++ }
++
++ if (rshash_state.below_count >= 3 ||
++ judge_rshash_direction() == GO_UP ||
++ hash_strength == 1) {
++ hash_strength = rshash_state.stable_point;
++ hash_strength_delta = 0;
++ inc_hash_strength(hash_strength_delta);
++ inc_hash_strength_delta();
++ rshash_state.lookup_window_index = 0;
++ rshash_state.state = RSHASH_TRYUP;
++ hash_strength_delta = 0;
++ } else {
++ dec_hash_strength(hash_strength_delta);
++ inc_hash_strength_delta();
++ }
++ break;
++
++ case RSHASH_TRYUP:
++ if (rshash_state.lookup_window_index++ % 5 == 0)
++ rshash_state.below_count = 0;
++
++ if (get_current_benefit() < rshash_state.turn_benefit_down)
++ rshash_state.below_count++;
++ else if (get_current_benefit() > rshash_state.turn_benefit_up) {
++ rshash_state.turn_point_up = hash_strength;
++ rshash_state.turn_benefit_up = get_current_benefit();
++ }
++
++ if (rshash_state.below_count >= 3 ||
++ judge_rshash_direction() == GO_DOWN ||
++ hash_strength == HASH_STRENGTH_MAX) {
++ hash_strength = rshash_state.turn_benefit_up >
++ rshash_state.turn_benefit_down ?
++ rshash_state.turn_point_up :
++ rshash_state.turn_point_down;
++
++ rshash_state.state = RSHASH_PRE_STILL;
++ } else {
++ inc_hash_strength(hash_strength_delta);
++ inc_hash_strength_delta();
++ }
++
++ break;
++
++ case RSHASH_NEW:
++ case RSHASH_PRE_STILL:
++ rshash_state.stable_benefit = get_current_benefit();
++ rshash_state.state = RSHASH_STILL;
++ hash_strength_delta = 0;
++ break;
++ default:
++ BUG();
++ }
++
++ /* rshash_neg = rshash_pos = 0; */
++ reset_benefit();
++
++ if (prev_hash_strength != hash_strength)
++ stable_tree_delta_hash(prev_hash_strength);
++
++ return prev_hash_strength != hash_strength;
++}
++
++/**
++ * round_update_ladder() - The main function to do update of all the
++ * adjustments whenever a scan round is finished.
++ */
++static noinline void round_update_ladder(void)
++{
++ int i;
++ unsigned long dedup;
++ struct vma_slot *slot, *tmp_slot;
++
++ for (i = 0; i < SCAN_LADDER_SIZE; i++)
++ uksm_scan_ladder[i].flags &= ~UKSM_RUNG_ROUND_FINISHED;
++
++ list_for_each_entry_safe(slot, tmp_slot, &vma_slot_dedup, dedup_list) {
++
++ /* slot may be rung_rm_slot() when mm exits */
++ if (slot->snode) {
++ dedup = cal_dedup_ratio_old(slot);
++ if (dedup && dedup >= uksm_abundant_threshold)
++ vma_rung_up(slot);
++ }
++
++ slot->pages_bemerged = 0;
++ slot->pages_cowed = 0;
++
++ list_del_init(&slot->dedup_list);
++ }
++}
++
++static void uksm_del_vma_slot(struct vma_slot *slot)
++{
++ int i, j;
++ struct rmap_list_entry *entry;
++
++ if (slot->snode) {
++ /*
++ * In case it just failed when entering the rung, it's not
++ * necessary.
++ */
++ rung_rm_slot(slot);
++ }
++
++ if (!list_empty(&slot->dedup_list))
++ list_del(&slot->dedup_list);
++
++ if (!slot->rmap_list_pool || !slot->pool_counts) {
++ /* In case it OOMed in uksm_vma_enter() */
++ goto out;
++ }
++
++ for (i = 0; i < slot->pool_size; i++) {
++ void *addr;
++
++ if (!slot->rmap_list_pool[i])
++ continue;
++
++ addr = kmap(slot->rmap_list_pool[i]);
++ for (j = 0; j < PAGE_SIZE / sizeof(*entry); j++) {
++ entry = (struct rmap_list_entry *)addr + j;
++ if (is_addr(entry->addr))
++ continue;
++ if (!entry->item)
++ continue;
++
++ remove_rmap_item_from_tree(entry->item);
++ free_rmap_item(entry->item);
++ slot->pool_counts[i]--;
++ }
++ BUG_ON(slot->pool_counts[i]);
++ kunmap(slot->rmap_list_pool[i]);
++ __free_page(slot->rmap_list_pool[i]);
++ }
++ kfree(slot->rmap_list_pool);
++ kfree(slot->pool_counts);
++
++out:
++ slot->rung = NULL;
++ if (slot->flags & UKSM_SLOT_IN_UKSM) {
++ BUG_ON(uksm_pages_total < slot->pages);
++ uksm_pages_total -= slot->pages;
++ }
++
++ if (slot->fully_scanned_round == fully_scanned_round)
++ scanned_virtual_pages -= slot->pages;
++ else
++ scanned_virtual_pages -= slot->pages_scanned;
++ free_vma_slot(slot);
++}
++
++
++#define SPIN_LOCK_PERIOD 32
++static struct vma_slot *cleanup_slots[SPIN_LOCK_PERIOD];
++static inline void cleanup_vma_slots(void)
++{
++ struct vma_slot *slot;
++ int i;
++
++ i = 0;
++ spin_lock(&vma_slot_list_lock);
++ while (!list_empty(&vma_slot_del)) {
++ slot = list_entry(vma_slot_del.next,
++ struct vma_slot, slot_list);
++ list_del(&slot->slot_list);
++ cleanup_slots[i++] = slot;
++ if (i == SPIN_LOCK_PERIOD) {
++ spin_unlock(&vma_slot_list_lock);
++ while (--i >= 0)
++ uksm_del_vma_slot(cleanup_slots[i]);
++ i = 0;
++ spin_lock(&vma_slot_list_lock);
++ }
++ }
++ spin_unlock(&vma_slot_list_lock);
++
++ while (--i >= 0)
++ uksm_del_vma_slot(cleanup_slots[i]);
++}
++
++/*
++ * Expotional moving average formula
++ */
++static inline unsigned long ema(unsigned long curr, unsigned long last_ema)
++{
++ /*
++ * For a very high burst, even the ema cannot work well, a false very
++ * high per-page time estimation can result in feedback in very high
++ * overhead of context switch and rung update -- this will then lead
++ * to higher per-paper time, this may not converge.
++ *
++ * Instead, we try to approach this value in a binary manner.
++ */
++ if (curr > last_ema * 10)
++ return last_ema * 2;
++
++ return (EMA_ALPHA * curr + (100 - EMA_ALPHA) * last_ema) / 100;
++}
++
++/*
++ * convert cpu ratio in 1/TIME_RATIO_SCALE configured by user to
++ * nanoseconds based on current uksm_sleep_jiffies.
++ */
++static inline unsigned long cpu_ratio_to_nsec(unsigned int ratio)
++{
++ return NSEC_PER_USEC * jiffies_to_usecs(uksm_sleep_jiffies) /
++ (TIME_RATIO_SCALE - ratio) * ratio;
++}
++
++
++static inline unsigned long rung_real_ratio(int cpu_time_ratio)
++{
++ unsigned long ret;
++
++ BUG_ON(!cpu_time_ratio);
++
++ if (cpu_time_ratio > 0)
++ ret = cpu_time_ratio;
++ else
++ ret = (unsigned long)(-cpu_time_ratio) *
++ uksm_max_cpu_percentage / 100UL;
++
++ return ret ? ret : 1;
++}
++
++static noinline void uksm_calc_scan_pages(void)
++{
++ struct scan_rung *ladder = uksm_scan_ladder;
++ unsigned long sleep_usecs, nsecs;
++ unsigned long ratio;
++ int i;
++ unsigned long per_page;
++
++ if (uksm_ema_page_time > 100000 ||
++ (((unsigned long) uksm_eval_round & (256UL - 1)) == 0UL))
++ uksm_ema_page_time = UKSM_PAGE_TIME_DEFAULT;
++
++ per_page = uksm_ema_page_time;
++ BUG_ON(!per_page);
++
++ /*
++ * For every 8 eval round, we try to probe a uksm_sleep_jiffies value
++ * based on saved user input.
++ */
++ if (((unsigned long) uksm_eval_round & (8UL - 1)) == 0UL)
++ uksm_sleep_jiffies = uksm_sleep_saved;
++
++ /* We require a rung scan at least 1 page in a period. */
++ nsecs = per_page;
++ ratio = rung_real_ratio(ladder[0].cpu_ratio);
++ if (cpu_ratio_to_nsec(ratio) < nsecs) {
++ sleep_usecs = nsecs * (TIME_RATIO_SCALE - ratio) / ratio
++ / NSEC_PER_USEC;
++ uksm_sleep_jiffies = usecs_to_jiffies(sleep_usecs) + 1;
++ }
++
++ for (i = 0; i < SCAN_LADDER_SIZE; i++) {
++ ratio = rung_real_ratio(ladder[i].cpu_ratio);
++ ladder[i].pages_to_scan = cpu_ratio_to_nsec(ratio) /
++ per_page;
++ BUG_ON(!ladder[i].pages_to_scan);
++ uksm_calc_rung_step(&ladder[i], per_page, ratio);
++ }
++}
++
++/*
++ * From the scan time of this round (ns) to next expected min sleep time
++ * (ms), be careful of the possible overflows. ratio is taken from
++ * rung_real_ratio()
++ */
++static inline
++unsigned int scan_time_to_sleep(unsigned long long scan_time, unsigned long ratio)
++{
++ scan_time >>= 20; /* to msec level now */
++ BUG_ON(scan_time > (ULONG_MAX / TIME_RATIO_SCALE));
++
++ return (unsigned int) ((unsigned long) scan_time *
++ (TIME_RATIO_SCALE - ratio) / ratio);
++}
++
++#define __round_mask(x, y) ((__typeof__(x))((y)-1))
++#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1)
++
++static void uksm_vma_enter(struct vma_slot **slots, unsigned long num)
++{
++ struct scan_rung *rung;
++
++ rung = &uksm_scan_ladder[0];
++ rung_add_new_slots(rung, slots, num);
++}
++
++static struct vma_slot *batch_slots[SLOT_TREE_NODE_STORE_SIZE];
++
++static void uksm_enter_all_slots(void)
++{
++ struct vma_slot *slot;
++ unsigned long index;
++ struct list_head empty_vma_list;
++ int i;
++
++ i = 0;
++ index = 0;
++ INIT_LIST_HEAD(&empty_vma_list);
++
++ spin_lock(&vma_slot_list_lock);
++ while (!list_empty(&vma_slot_new)) {
++ slot = list_entry(vma_slot_new.next,
++ struct vma_slot, slot_list);
++
++ if (!slot->vma->anon_vma) {
++ list_move(&slot->slot_list, &empty_vma_list);
++ } else if (vma_can_enter(slot->vma)) {
++ batch_slots[index++] = slot;
++ list_del_init(&slot->slot_list);
++ } else {
++ list_move(&slot->slot_list, &vma_slot_noadd);
++ }
++
++ if (++i == SPIN_LOCK_PERIOD ||
++ (index && !(index % SLOT_TREE_NODE_STORE_SIZE))) {
++ spin_unlock(&vma_slot_list_lock);
++
++ if (index && !(index % SLOT_TREE_NODE_STORE_SIZE)) {
++ uksm_vma_enter(batch_slots, index);
++ index = 0;
++ }
++ i = 0;
++ cond_resched();
++ spin_lock(&vma_slot_list_lock);
++ }
++ }
++
++ list_splice(&empty_vma_list, &vma_slot_new);
++
++ spin_unlock(&vma_slot_list_lock);
++
++ if (index)
++ uksm_vma_enter(batch_slots, index);
++
++}
++
++static inline int rung_round_finished(struct scan_rung *rung)
++{
++ return rung->flags & UKSM_RUNG_ROUND_FINISHED;
++}
++
++static inline void judge_slot(struct vma_slot *slot)
++{
++ struct scan_rung *rung = slot->rung;
++ unsigned long dedup;
++ int deleted;
++
++ dedup = cal_dedup_ratio(slot);
++ if (vma_fully_scanned(slot) && uksm_thrash_threshold)
++ deleted = vma_rung_enter(slot, &uksm_scan_ladder[0]);
++ else if (dedup && dedup >= uksm_abundant_threshold)
++ deleted = vma_rung_up(slot);
++ else
++ deleted = vma_rung_down(slot);
++
++ slot->pages_merged = 0;
++ slot->pages_cowed = 0;
++ slot->this_sampled = 0;
++
++ if (vma_fully_scanned(slot))
++ slot->pages_scanned = 0;
++
++ slot->last_scanned = slot->pages_scanned;
++
++ /* If its deleted in above, then rung was already advanced. */
++ if (!deleted)
++ advance_current_scan(rung);
++}
++
++
++static inline int hash_round_finished(void)
++{
++ if (scanned_virtual_pages > (uksm_pages_total >> 2)) {
++ scanned_virtual_pages = 0;
++ if (uksm_pages_scanned)
++ fully_scanned_round++;
++
++ return 1;
++ } else {
++ return 0;
++ }
++}
++
++#define UKSM_MMSEM_BATCH 5
++#define BUSY_RETRY 100
++
++/**
++ * uksm_do_scan() - the main worker function.
++ */
++static noinline void uksm_do_scan(void)
++{
++ struct vma_slot *slot, *iter;
++ struct mm_struct *busy_mm;
++ unsigned char round_finished, all_rungs_emtpy;
++ int i, err, mmsem_batch;
++ unsigned long pcost;
++ long long delta_exec;
++ unsigned long vpages, max_cpu_ratio;
++ unsigned long long start_time, end_time, scan_time;
++ unsigned int expected_jiffies;
++
++ might_sleep();
++
++ vpages = 0;
++
++ start_time = task_sched_runtime(current);
++ max_cpu_ratio = 0;
++ mmsem_batch = 0;
++
++ for (i = 0; i < SCAN_LADDER_SIZE;) {
++ struct scan_rung *rung = &uksm_scan_ladder[i];
++ unsigned long ratio;
++ int busy_retry;
++
++ if (!rung->pages_to_scan) {
++ i++;
++ continue;
++ }
++
++ if (!rung->vma_root.num) {
++ rung->pages_to_scan = 0;
++ i++;
++ continue;
++ }
++
++ ratio = rung_real_ratio(rung->cpu_ratio);
++ if (ratio > max_cpu_ratio)
++ max_cpu_ratio = ratio;
++
++ busy_retry = BUSY_RETRY;
++ /*
++ * Do not consider rung_round_finished() here, just used up the
++ * rung->pages_to_scan quota.
++ */
++ while (rung->pages_to_scan && rung->vma_root.num &&
++ likely(!freezing(current))) {
++ int reset = 0;
++
++ slot = rung->current_scan;
++
++ BUG_ON(vma_fully_scanned(slot));
++
++ if (mmsem_batch)
++ err = 0;
++ else
++ err = try_down_read_slot_mmap_sem(slot);
++
++ if (err == -ENOENT) {
++rm_slot:
++ rung_rm_slot(slot);
++ continue;
++ }
++
++ busy_mm = slot->mm;
++
++ if (err == -EBUSY) {
++ /* skip other vmas on the same mm */
++ do {
++ reset = advance_current_scan(rung);
++ iter = rung->current_scan;
++ busy_retry--;
++ if (iter->vma->vm_mm != busy_mm ||
++ !busy_retry || reset)
++ break;
++ } while (1);
++
++ if (iter->vma->vm_mm != busy_mm) {
++ continue;
++ } else {
++ /* scan round finsished */
++ break;
++ }
++ }
++
++ BUG_ON(!vma_can_enter(slot->vma));
++ if (uksm_test_exit(slot->vma->vm_mm)) {
++ mmsem_batch = 0;
++ up_read(&slot->vma->vm_mm->mmap_sem);
++ goto rm_slot;
++ }
++
++ if (mmsem_batch)
++ mmsem_batch--;
++ else
++ mmsem_batch = UKSM_MMSEM_BATCH;
++
++ /* Ok, we have take the mmap_sem, ready to scan */
++ scan_vma_one_page(slot);
++ rung->pages_to_scan--;
++ vpages++;
++
++ if (rung->current_offset + rung->step > slot->pages - 1
++ || vma_fully_scanned(slot)) {
++ up_read(&slot->vma->vm_mm->mmap_sem);
++ judge_slot(slot);
++ mmsem_batch = 0;
++ } else {
++ rung->current_offset += rung->step;
++ if (!mmsem_batch)
++ up_read(&slot->vma->vm_mm->mmap_sem);
++ }
++
++ busy_retry = BUSY_RETRY;
++ cond_resched();
++ }
++
++ if (mmsem_batch) {
++ up_read(&slot->vma->vm_mm->mmap_sem);
++ mmsem_batch = 0;
++ }
++
++ if (freezing(current))
++ break;
++
++ cond_resched();
++ }
++ end_time = task_sched_runtime(current);
++ delta_exec = end_time - start_time;
++
++ if (freezing(current))
++ return;
++
++ cleanup_vma_slots();
++ uksm_enter_all_slots();
++
++ round_finished = 1;
++ all_rungs_emtpy = 1;
++ for (i = 0; i < SCAN_LADDER_SIZE; i++) {
++ struct scan_rung *rung = &uksm_scan_ladder[i];
++
++ if (rung->vma_root.num) {
++ all_rungs_emtpy = 0;
++ if (!rung_round_finished(rung))
++ round_finished = 0;
++ }
++ }
++
++ if (all_rungs_emtpy)
++ round_finished = 0;
++
++ if (round_finished) {
++ round_update_ladder();
++ uksm_eval_round++;
++
++ if (hash_round_finished() && rshash_adjust()) {
++ /* Reset the unstable root iff hash strength changed */
++ uksm_hash_round++;
++ root_unstable_tree = RB_ROOT;
++ free_all_tree_nodes(&unstable_tree_node_list);
++ }
++
++ /*
++ * A number of pages can hang around indefinitely on per-cpu
++ * pagevecs, raised page count preventing write_protect_page
++ * from merging them. Though it doesn't really matter much,
++ * it is puzzling to see some stuck in pages_volatile until
++ * other activity jostles them out, and they also prevented
++ * LTP's KSM test from succeeding deterministically; so drain
++ * them here (here rather than on entry to uksm_do_scan(),
++ * so we don't IPI too often when pages_to_scan is set low).
++ */
++ lru_add_drain_all();
++ }
++
++
++ if (vpages && delta_exec > 0) {
++ pcost = (unsigned long) delta_exec / vpages;
++ if (likely(uksm_ema_page_time))
++ uksm_ema_page_time = ema(pcost, uksm_ema_page_time);
++ else
++ uksm_ema_page_time = pcost;
++ }
++
++ uksm_calc_scan_pages();
++ uksm_sleep_real = uksm_sleep_jiffies;
++ /* in case of radical cpu bursts, apply the upper bound */
++ end_time = task_sched_runtime(current);
++ if (max_cpu_ratio && end_time > start_time) {
++ scan_time = end_time - start_time;
++ expected_jiffies = msecs_to_jiffies(
++ scan_time_to_sleep(scan_time, max_cpu_ratio));
++
++ if (expected_jiffies > uksm_sleep_real)
++ uksm_sleep_real = expected_jiffies;
++
++ /* We have a 1 second up bound for responsiveness. */
++ if (jiffies_to_msecs(uksm_sleep_real) > MSEC_PER_SEC)
++ uksm_sleep_real = msecs_to_jiffies(1000);
++ }
++
++ return;
++}
++
++static int ksmd_should_run(void)
++{
++ return uksm_run & UKSM_RUN_MERGE;
++}
++
++static int uksm_scan_thread(void *nothing)
++{
++ set_freezable();
++ set_user_nice(current, 5);
++
++ while (!kthread_should_stop()) {
++ mutex_lock(&uksm_thread_mutex);
++ if (ksmd_should_run())
++ uksm_do_scan();
++ mutex_unlock(&uksm_thread_mutex);
++
++ try_to_freeze();
++
++ if (ksmd_should_run()) {
++ schedule_timeout_interruptible(uksm_sleep_real);
++ uksm_sleep_times++;
++ } else {
++ wait_event_freezable(uksm_thread_wait,
++ ksmd_should_run() || kthread_should_stop());
++ }
++ }
++ return 0;
++}
++
++void rmap_walk_ksm(struct page *page, struct rmap_walk_control *rwc)
++{
++ struct stable_node *stable_node;
++ struct node_vma *node_vma;
++ struct rmap_item *rmap_item;
++ int search_new_forks = 0;
++ unsigned long address;
++
++ VM_BUG_ON_PAGE(!PageKsm(page), page);
++ VM_BUG_ON_PAGE(!PageLocked(page), page);
++
++ stable_node = page_stable_node(page);
++ if (!stable_node)
++ return;
++again:
++ hlist_for_each_entry(node_vma, &stable_node->hlist, hlist) {
++ hlist_for_each_entry(rmap_item, &node_vma->rmap_hlist, hlist) {
++ struct anon_vma *anon_vma = rmap_item->anon_vma;
++ struct anon_vma_chain *vmac;
++ struct vm_area_struct *vma;
++
++ cond_resched();
++ anon_vma_lock_read(anon_vma);
++ anon_vma_interval_tree_foreach(vmac, &anon_vma->rb_root,
++ 0, ULONG_MAX) {
++ cond_resched();
++ vma = vmac->vma;
++ address = get_rmap_addr(rmap_item);
++
++ if (address < vma->vm_start ||
++ address >= vma->vm_end)
++ continue;
++
++ if ((rmap_item->slot->vma == vma) ==
++ search_new_forks)
++ continue;
++
++ if (rwc->invalid_vma && rwc->invalid_vma(vma, rwc->arg))
++ continue;
++
++ if (!rwc->rmap_one(page, vma, address, rwc->arg)) {
++ anon_vma_unlock_read(anon_vma);
++ return;
++ }
++
++ if (rwc->done && rwc->done(page)) {
++ anon_vma_unlock_read(anon_vma);
++ return;
++ }
++ }
++ anon_vma_unlock_read(anon_vma);
++ }
++ }
++ if (!search_new_forks++)
++ goto again;
++}
++
++#ifdef CONFIG_MIGRATION
++/* Common ksm interface but may be specific to uksm */
++void ksm_migrate_page(struct page *newpage, struct page *oldpage)
++{
++ struct stable_node *stable_node;
++
++ VM_BUG_ON_PAGE(!PageLocked(oldpage), oldpage);
++ VM_BUG_ON_PAGE(!PageLocked(newpage), newpage);
++ VM_BUG_ON(newpage->mapping != oldpage->mapping);
++
++ stable_node = page_stable_node(newpage);
++ if (stable_node) {
++ VM_BUG_ON(stable_node->kpfn != page_to_pfn(oldpage));
++ stable_node->kpfn = page_to_pfn(newpage);
++ /*
++ * newpage->mapping was set in advance; now we need smp_wmb()
++ * to make sure that the new stable_node->kpfn is visible
++ * to get_ksm_page() before it can see that oldpage->mapping
++ * has gone stale (or that PageSwapCache has been cleared).
++ */
++ smp_wmb();
++ set_page_stable_node(oldpage, NULL);
++ }
++}
++#endif /* CONFIG_MIGRATION */
++
++#ifdef CONFIG_MEMORY_HOTREMOVE
++static struct stable_node *uksm_check_stable_tree(unsigned long start_pfn,
++ unsigned long end_pfn)
++{
++ struct rb_node *node;
++
++ for (node = rb_first(root_stable_treep); node; node = rb_next(node)) {
++ struct stable_node *stable_node;
++
++ stable_node = rb_entry(node, struct stable_node, node);
++ if (stable_node->kpfn >= start_pfn &&
++ stable_node->kpfn < end_pfn)
++ return stable_node;
++ }
++ return NULL;
++}
++
++static int uksm_memory_callback(struct notifier_block *self,
++ unsigned long action, void *arg)
++{
++ struct memory_notify *mn = arg;
++ struct stable_node *stable_node;
++
++ switch (action) {
++ case MEM_GOING_OFFLINE:
++ /*
++ * Keep it very simple for now: just lock out ksmd and
++ * MADV_UNMERGEABLE while any memory is going offline.
++ * mutex_lock_nested() is necessary because lockdep was alarmed
++ * that here we take uksm_thread_mutex inside notifier chain
++ * mutex, and later take notifier chain mutex inside
++ * uksm_thread_mutex to unlock it. But that's safe because both
++ * are inside mem_hotplug_mutex.
++ */
++ mutex_lock_nested(&uksm_thread_mutex, SINGLE_DEPTH_NESTING);
++ break;
++
++ case MEM_OFFLINE:
++ /*
++ * Most of the work is done by page migration; but there might
++ * be a few stable_nodes left over, still pointing to struct
++ * pages which have been offlined: prune those from the tree.
++ */
++ while ((stable_node = uksm_check_stable_tree(mn->start_pfn,
++ mn->start_pfn + mn->nr_pages)) != NULL)
++ remove_node_from_stable_tree(stable_node, 1, 1);
++ /* fallthrough */
++
++ case MEM_CANCEL_OFFLINE:
++ mutex_unlock(&uksm_thread_mutex);
++ break;
++ }
++ return NOTIFY_OK;
++}
++#endif /* CONFIG_MEMORY_HOTREMOVE */
++
++#ifdef CONFIG_SYSFS
++/*
++ * This all compiles without CONFIG_SYSFS, but is a waste of space.
++ */
++
++#define UKSM_ATTR_RO(_name) \
++ static struct kobj_attribute _name##_attr = __ATTR_RO(_name)
++#define UKSM_ATTR(_name) \
++ static struct kobj_attribute _name##_attr = \
++ __ATTR(_name, 0644, _name##_show, _name##_store)
++
++static ssize_t max_cpu_percentage_show(struct kobject *kobj,
++ struct kobj_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%u\n", uksm_max_cpu_percentage);
++}
++
++static ssize_t max_cpu_percentage_store(struct kobject *kobj,
++ struct kobj_attribute *attr,
++ const char *buf, size_t count)
++{
++ unsigned long max_cpu_percentage;
++ int err;
++
++ err = kstrtoul(buf, 10, &max_cpu_percentage);
++ if (err || max_cpu_percentage > 100)
++ return -EINVAL;
++
++ if (max_cpu_percentage == 100)
++ max_cpu_percentage = 99;
++ else if (max_cpu_percentage < 10)
++ max_cpu_percentage = 10;
++
++ uksm_max_cpu_percentage = max_cpu_percentage;
++
++ return count;
++}
++UKSM_ATTR(max_cpu_percentage);
++
++static ssize_t sleep_millisecs_show(struct kobject *kobj,
++ struct kobj_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%u\n", jiffies_to_msecs(uksm_sleep_jiffies));
++}
++
++static ssize_t sleep_millisecs_store(struct kobject *kobj,
++ struct kobj_attribute *attr,
++ const char *buf, size_t count)
++{
++ unsigned long msecs;
++ int err;
++
++ err = kstrtoul(buf, 10, &msecs);
++ if (err || msecs > MSEC_PER_SEC)
++ return -EINVAL;
++
++ uksm_sleep_jiffies = msecs_to_jiffies(msecs);
++ uksm_sleep_saved = uksm_sleep_jiffies;
++
++ return count;
++}
++UKSM_ATTR(sleep_millisecs);
++
++
++static ssize_t cpu_governor_show(struct kobject *kobj,
++ struct kobj_attribute *attr, char *buf)
++{
++ int n = sizeof(uksm_cpu_governor_str) / sizeof(char *);
++ int i;
++
++ buf[0] = '\0';
++ for (i = 0; i < n ; i++) {
++ if (uksm_cpu_governor == i)
++ strcat(buf, "[");
++
++ strcat(buf, uksm_cpu_governor_str[i]);
++
++ if (uksm_cpu_governor == i)
++ strcat(buf, "]");
++
++ strcat(buf, " ");
++ }
++ strcat(buf, "\n");
++
++ return strlen(buf);
++}
++
++static inline void init_performance_values(void)
++{
++ int i;
++ struct scan_rung *rung;
++ struct uksm_cpu_preset_s *preset = uksm_cpu_preset + uksm_cpu_governor;
++
++
++ for (i = 0; i < SCAN_LADDER_SIZE; i++) {
++ rung = uksm_scan_ladder + i;
++ rung->cpu_ratio = preset->cpu_ratio[i];
++ rung->cover_msecs = preset->cover_msecs[i];
++ }
++
++ uksm_max_cpu_percentage = preset->max_cpu;
++}
++
++static ssize_t cpu_governor_store(struct kobject *kobj,
++ struct kobj_attribute *attr,
++ const char *buf, size_t count)
++{
++ int n = sizeof(uksm_cpu_governor_str) / sizeof(char *);
++
++ for (n--; n >= 0 ; n--) {
++ if (!strncmp(buf, uksm_cpu_governor_str[n],
++ strlen(uksm_cpu_governor_str[n])))
++ break;
++ }
++
++ if (n < 0)
++ return -EINVAL;
++ else
++ uksm_cpu_governor = n;
++
++ init_performance_values();
++
++ return count;
++}
++UKSM_ATTR(cpu_governor);
++
++static ssize_t run_show(struct kobject *kobj, struct kobj_attribute *attr,
++ char *buf)
++{
++ return sprintf(buf, "%u\n", uksm_run);
++}
++
++static ssize_t run_store(struct kobject *kobj, struct kobj_attribute *attr,
++ const char *buf, size_t count)
++{
++ int err;
++ unsigned long flags;
++
++ err = kstrtoul(buf, 10, &flags);
++ if (err || flags > UINT_MAX)
++ return -EINVAL;
++ if (flags > UKSM_RUN_MERGE)
++ return -EINVAL;
++
++ mutex_lock(&uksm_thread_mutex);
++ if (uksm_run != flags)
++ uksm_run = flags;
++ mutex_unlock(&uksm_thread_mutex);
++
++ if (flags & UKSM_RUN_MERGE)
++ wake_up_interruptible(&uksm_thread_wait);
++
++ return count;
++}
++UKSM_ATTR(run);
++
++static ssize_t abundant_threshold_show(struct kobject *kobj,
++ struct kobj_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%u\n", uksm_abundant_threshold);
++}
++
++static ssize_t abundant_threshold_store(struct kobject *kobj,
++ struct kobj_attribute *attr,
++ const char *buf, size_t count)
++{
++ int err;
++ unsigned long flags;
++
++ err = kstrtoul(buf, 10, &flags);
++ if (err || flags > 99)
++ return -EINVAL;
++
++ uksm_abundant_threshold = flags;
++
++ return count;
++}
++UKSM_ATTR(abundant_threshold);
++
++static ssize_t thrash_threshold_show(struct kobject *kobj,
++ struct kobj_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%u\n", uksm_thrash_threshold);
++}
++
++static ssize_t thrash_threshold_store(struct kobject *kobj,
++ struct kobj_attribute *attr,
++ const char *buf, size_t count)
++{
++ int err;
++ unsigned long flags;
++
++ err = kstrtoul(buf, 10, &flags);
++ if (err || flags > 99)
++ return -EINVAL;
++
++ uksm_thrash_threshold = flags;
++
++ return count;
++}
++UKSM_ATTR(thrash_threshold);
++
++static ssize_t cpu_ratios_show(struct kobject *kobj,
++ struct kobj_attribute *attr, char *buf)
++{
++ int i, size;
++ struct scan_rung *rung;
++ char *p = buf;
++
++ for (i = 0; i < SCAN_LADDER_SIZE; i++) {
++ rung = &uksm_scan_ladder[i];
++
++ if (rung->cpu_ratio > 0)
++ size = sprintf(p, "%d ", rung->cpu_ratio);
++ else
++ size = sprintf(p, "MAX/%d ",
++ TIME_RATIO_SCALE / -rung->cpu_ratio);
++
++ p += size;
++ }
++
++ *p++ = '\n';
++ *p = '\0';
++
++ return p - buf;
++}
++
++static ssize_t cpu_ratios_store(struct kobject *kobj,
++ struct kobj_attribute *attr,
++ const char *buf, size_t count)
++{
++ int i, cpuratios[SCAN_LADDER_SIZE], err;
++ unsigned long value;
++ struct scan_rung *rung;
++ char *p, *end = NULL;
++
++ p = kzalloc(count, GFP_KERNEL);
++ if (!p)
++ return -ENOMEM;
++
++ memcpy(p, buf, count);
++
++ for (i = 0; i < SCAN_LADDER_SIZE; i++) {
++ if (i != SCAN_LADDER_SIZE - 1) {
++ end = strchr(p, ' ');
++ if (!end)
++ return -EINVAL;
++
++ *end = '\0';
++ }
++
++ if (strstr(p, "MAX/")) {
++ p = strchr(p, '/') + 1;
++ err = kstrtoul(p, 10, &value);
++ if (err || value > TIME_RATIO_SCALE || !value)
++ return -EINVAL;
++
++ cpuratios[i] = -(int) (TIME_RATIO_SCALE / value);
++ } else {
++ err = kstrtoul(p, 10, &value);
++ if (err || value > TIME_RATIO_SCALE || !value)
++ return -EINVAL;
++
++ cpuratios[i] = value;
++ }
++
++ p = end + 1;
++ }
++
++ for (i = 0; i < SCAN_LADDER_SIZE; i++) {
++ rung = &uksm_scan_ladder[i];
++
++ rung->cpu_ratio = cpuratios[i];
++ }
++
++ return count;
++}
++UKSM_ATTR(cpu_ratios);
++
++static ssize_t eval_intervals_show(struct kobject *kobj,
++ struct kobj_attribute *attr, char *buf)
++{
++ int i, size;
++ struct scan_rung *rung;
++ char *p = buf;
++
++ for (i = 0; i < SCAN_LADDER_SIZE; i++) {
++ rung = &uksm_scan_ladder[i];
++ size = sprintf(p, "%u ", rung->cover_msecs);
++ p += size;
++ }
++
++ *p++ = '\n';
++ *p = '\0';
++
++ return p - buf;
++}
++
++static ssize_t eval_intervals_store(struct kobject *kobj,
++ struct kobj_attribute *attr,
++ const char *buf, size_t count)
++{
++ int i, err;
++ unsigned long values[SCAN_LADDER_SIZE];
++ struct scan_rung *rung;
++ char *p, *end = NULL;
++ ssize_t ret = count;
++
++ p = kzalloc(count + 2, GFP_KERNEL);
++ if (!p)
++ return -ENOMEM;
++
++ memcpy(p, buf, count);
++
++ for (i = 0; i < SCAN_LADDER_SIZE; i++) {
++ if (i != SCAN_LADDER_SIZE - 1) {
++ end = strchr(p, ' ');
++ if (!end) {
++ ret = -EINVAL;
++ goto out;
++ }
++
++ *end = '\0';
++ }
++
++ err = kstrtoul(p, 10, &values[i]);
++ if (err) {
++ ret = -EINVAL;
++ goto out;
++ }
++
++ p = end + 1;
++ }
++
++ for (i = 0; i < SCAN_LADDER_SIZE; i++) {
++ rung = &uksm_scan_ladder[i];
++
++ rung->cover_msecs = values[i];
++ }
++
++out:
++ kfree(p);
++ return ret;
++}
++UKSM_ATTR(eval_intervals);
++
++static ssize_t ema_per_page_time_show(struct kobject *kobj,
++ struct kobj_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%lu\n", uksm_ema_page_time);
++}
++UKSM_ATTR_RO(ema_per_page_time);
++
++static ssize_t pages_shared_show(struct kobject *kobj,
++ struct kobj_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%lu\n", uksm_pages_shared);
++}
++UKSM_ATTR_RO(pages_shared);
++
++static ssize_t pages_sharing_show(struct kobject *kobj,
++ struct kobj_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%lu\n", uksm_pages_sharing);
++}
++UKSM_ATTR_RO(pages_sharing);
++
++static ssize_t pages_unshared_show(struct kobject *kobj,
++ struct kobj_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%lu\n", uksm_pages_unshared);
++}
++UKSM_ATTR_RO(pages_unshared);
++
++static ssize_t full_scans_show(struct kobject *kobj,
++ struct kobj_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%llu\n", fully_scanned_round);
++}
++UKSM_ATTR_RO(full_scans);
++
++static ssize_t pages_scanned_show(struct kobject *kobj,
++ struct kobj_attribute *attr, char *buf)
++{
++ unsigned long base = 0;
++ u64 delta, ret;
++
++ if (pages_scanned_stored) {
++ base = pages_scanned_base;
++ ret = pages_scanned_stored;
++ delta = uksm_pages_scanned >> base;
++ if (CAN_OVERFLOW_U64(ret, delta)) {
++ ret >>= 1;
++ delta >>= 1;
++ base++;
++ ret += delta;
++ }
++ } else {
++ ret = uksm_pages_scanned;
++ }
++
++ while (ret > ULONG_MAX) {
++ ret >>= 1;
++ base++;
++ }
++
++ if (base)
++ return sprintf(buf, "%lu * 2^%lu\n", (unsigned long)ret, base);
++ else
++ return sprintf(buf, "%lu\n", (unsigned long)ret);
++}
++UKSM_ATTR_RO(pages_scanned);
++
++static ssize_t hash_strength_show(struct kobject *kobj,
++ struct kobj_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%lu\n", hash_strength);
++}
++UKSM_ATTR_RO(hash_strength);
++
++static ssize_t sleep_times_show(struct kobject *kobj,
++ struct kobj_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%llu\n", uksm_sleep_times);
++}
++UKSM_ATTR_RO(sleep_times);
++
++
++static struct attribute *uksm_attrs[] = {
++ &max_cpu_percentage_attr.attr,
++ &sleep_millisecs_attr.attr,
++ &cpu_governor_attr.attr,
++ &run_attr.attr,
++ &ema_per_page_time_attr.attr,
++ &pages_shared_attr.attr,
++ &pages_sharing_attr.attr,
++ &pages_unshared_attr.attr,
++ &full_scans_attr.attr,
++ &pages_scanned_attr.attr,
++ &hash_strength_attr.attr,
++ &sleep_times_attr.attr,
++ &thrash_threshold_attr.attr,
++ &abundant_threshold_attr.attr,
++ &cpu_ratios_attr.attr,
++ &eval_intervals_attr.attr,
++ NULL,
++};
++
++static struct attribute_group uksm_attr_group = {
++ .attrs = uksm_attrs,
++ .name = "uksm",
++};
++#endif /* CONFIG_SYSFS */
++
++static inline void init_scan_ladder(void)
++{
++ int i;
++ struct scan_rung *rung;
++
++ for (i = 0; i < SCAN_LADDER_SIZE; i++) {
++ rung = uksm_scan_ladder + i;
++ slot_tree_init_root(&rung->vma_root);
++ }
++
++ init_performance_values();
++ uksm_calc_scan_pages();
++}
++
++static inline int cal_positive_negative_costs(void)
++{
++ struct page *p1, *p2;
++ unsigned char *addr1, *addr2;
++ unsigned long i, time_start, hash_cost;
++ unsigned long loopnum = 0;
++
++ /*IMPORTANT: volatile is needed to prevent over-optimization by gcc. */
++ volatile u32 hash;
++ volatile int ret;
++
++ p1 = alloc_page(GFP_KERNEL);
++ if (!p1)
++ return -ENOMEM;
++
++ p2 = alloc_page(GFP_KERNEL);
++ if (!p2)
++ return -ENOMEM;
++
++ addr1 = kmap_atomic(p1);
++ addr2 = kmap_atomic(p2);
++ memset(addr1, prandom_u32(), PAGE_SIZE);
++ memcpy(addr2, addr1, PAGE_SIZE);
++
++ /* make sure that the two pages differ in last byte */
++ addr2[PAGE_SIZE-1] = ~addr2[PAGE_SIZE-1];
++ kunmap_atomic(addr2);
++ kunmap_atomic(addr1);
++
++ time_start = jiffies;
++ while (jiffies - time_start < 100) {
++ for (i = 0; i < 100; i++)
++ hash = page_hash(p1, HASH_STRENGTH_FULL, 0);
++ loopnum += 100;
++ }
++ hash_cost = (jiffies - time_start);
++
++ time_start = jiffies;
++ for (i = 0; i < loopnum; i++)
++ ret = pages_identical(p1, p2);
++ memcmp_cost = HASH_STRENGTH_FULL * (jiffies - time_start);
++ memcmp_cost /= hash_cost;
++ pr_info("UKSM: relative memcmp_cost = %lu "
++ "hash=%u cmp_ret=%d.\n",
++ memcmp_cost, hash, ret);
++
++ __free_page(p1);
++ __free_page(p2);
++ return 0;
++}
++
++static int init_zeropage_hash_table(void)
++{
++ struct page *page;
++ char *addr;
++ int i;
++
++ page = alloc_page(GFP_KERNEL);
++ if (!page)
++ return -ENOMEM;
++
++ addr = kmap_atomic(page);
++ memset(addr, 0, PAGE_SIZE);
++ kunmap_atomic(addr);
++
++ zero_hash_table = kmalloc_array(HASH_STRENGTH_MAX, sizeof(u32),
++ GFP_KERNEL);
++ if (!zero_hash_table)
++ return -ENOMEM;
++
++ for (i = 0; i < HASH_STRENGTH_MAX; i++)
++ zero_hash_table[i] = page_hash(page, i, 0);
++
++ __free_page(page);
++
++ return 0;
++}
++
++static inline int init_random_sampling(void)
++{
++ unsigned long i;
++
++ random_nums = kmalloc(PAGE_SIZE, GFP_KERNEL);
++ if (!random_nums)
++ return -ENOMEM;
++
++ for (i = 0; i < HASH_STRENGTH_FULL; i++)
++ random_nums[i] = i;
++
++ for (i = 0; i < HASH_STRENGTH_FULL; i++) {
++ unsigned long rand_range, swap_index, tmp;
++
++ rand_range = HASH_STRENGTH_FULL - i;
++ swap_index = i + prandom_u32() % rand_range;
++ tmp = random_nums[i];
++ random_nums[i] = random_nums[swap_index];
++ random_nums[swap_index] = tmp;
++ }
++
++ rshash_state.state = RSHASH_NEW;
++ rshash_state.below_count = 0;
++ rshash_state.lookup_window_index = 0;
++
++ return cal_positive_negative_costs();
++}
++
++static int __init uksm_slab_init(void)
++{
++ rmap_item_cache = UKSM_KMEM_CACHE(rmap_item, 0);
++ if (!rmap_item_cache)
++ goto out;
++
++ stable_node_cache = UKSM_KMEM_CACHE(stable_node, 0);
++ if (!stable_node_cache)
++ goto out_free1;
++
++ node_vma_cache = UKSM_KMEM_CACHE(node_vma, 0);
++ if (!node_vma_cache)
++ goto out_free2;
++
++ vma_slot_cache = UKSM_KMEM_CACHE(vma_slot, 0);
++ if (!vma_slot_cache)
++ goto out_free3;
++
++ tree_node_cache = UKSM_KMEM_CACHE(tree_node, 0);
++ if (!tree_node_cache)
++ goto out_free4;
++
++ return 0;
++
++out_free4:
++ kmem_cache_destroy(vma_slot_cache);
++out_free3:
++ kmem_cache_destroy(node_vma_cache);
++out_free2:
++ kmem_cache_destroy(stable_node_cache);
++out_free1:
++ kmem_cache_destroy(rmap_item_cache);
++out:
++ return -ENOMEM;
++}
++
++static void __init uksm_slab_free(void)
++{
++ kmem_cache_destroy(stable_node_cache);
++ kmem_cache_destroy(rmap_item_cache);
++ kmem_cache_destroy(node_vma_cache);
++ kmem_cache_destroy(vma_slot_cache);
++ kmem_cache_destroy(tree_node_cache);
++}
++
++/* Common interface to ksm, different to it. */
++int ksm_madvise(struct vm_area_struct *vma, unsigned long start,
++ unsigned long end, int advice, unsigned long *vm_flags)
++{
++ int err;
++
++ switch (advice) {
++ case MADV_MERGEABLE:
++ return 0; /* just ignore the advice */
++
++ case MADV_UNMERGEABLE:
++ if (!(*vm_flags & VM_MERGEABLE) || !uksm_flags_can_scan(*vm_flags))
++ return 0; /* just ignore the advice */
++
++ if (vma->anon_vma) {
++ err = unmerge_uksm_pages(vma, start, end);
++ if (err)
++ return err;
++ }
++
++ uksm_remove_vma(vma);
++ *vm_flags &= ~VM_MERGEABLE;
++ break;
++ }
++
++ return 0;
++}
++
++/* Common interface to ksm, actually the same. */
++struct page *ksm_might_need_to_copy(struct page *page,
++ struct vm_area_struct *vma, unsigned long address)
++{
++ struct anon_vma *anon_vma = page_anon_vma(page);
++ struct page *new_page;
++
++ if (PageKsm(page)) {
++ if (page_stable_node(page))
++ return page; /* no need to copy it */
++ } else if (!anon_vma) {
++ return page; /* no need to copy it */
++ } else if (anon_vma->root == vma->anon_vma->root &&
++ page->index == linear_page_index(vma, address)) {
++ return page; /* still no need to copy it */
++ }
++ if (!PageUptodate(page))
++ return page; /* let do_swap_page report the error */
++
++ new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, address);
++ if (new_page) {
++ copy_user_highpage(new_page, page, address, vma);
++
++ SetPageDirty(new_page);
++ __SetPageUptodate(new_page);
++ __SetPageLocked(new_page);
++ }
++
++ return new_page;
++}
++
++static int __init uksm_init(void)
++{
++ struct task_struct *uksm_thread;
++ int err;
++
++ uksm_sleep_jiffies = msecs_to_jiffies(100);
++ uksm_sleep_saved = uksm_sleep_jiffies;
++
++ slot_tree_init();
++ init_scan_ladder();
++
++
++ err = init_random_sampling();
++ if (err)
++ goto out_free2;
++
++ err = uksm_slab_init();
++ if (err)
++ goto out_free1;
++
++ err = init_zeropage_hash_table();
++ if (err)
++ goto out_free0;
++
++ uksm_thread = kthread_run(uksm_scan_thread, NULL, "uksmd");
++ if (IS_ERR(uksm_thread)) {
++ pr_err("uksm: creating kthread failed\n");
++ err = PTR_ERR(uksm_thread);
++ goto out_free;
++ }
++
++#ifdef CONFIG_SYSFS
++ err = sysfs_create_group(mm_kobj, &uksm_attr_group);
++ if (err) {
++ pr_err("uksm: register sysfs failed\n");
++ kthread_stop(uksm_thread);
++ goto out_free;
++ }
++#else
++ uksm_run = UKSM_RUN_MERGE; /* no way for user to start it */
++
++#endif /* CONFIG_SYSFS */
++
++#ifdef CONFIG_MEMORY_HOTREMOVE
++ /*
++ * Choose a high priority since the callback takes uksm_thread_mutex:
++ * later callbacks could only be taking locks which nest within that.
++ */
++ hotplug_memory_notifier(uksm_memory_callback, 100);
++#endif
++ return 0;
++
++out_free:
++ kfree(zero_hash_table);
++out_free0:
++ uksm_slab_free();
++out_free1:
++ kfree(random_nums);
++out_free2:
++ kfree(uksm_scan_ladder);
++ return err;
++}
++
++#ifdef MODULE
++subsys_initcall(ksm_init);
++#else
++late_initcall(uksm_init);
++#endif
++
+diff -Nur a/mm/vmstat.c b/mm/vmstat.c
+--- a/mm/vmstat.c 2019-06-11 11:20:57.000000000 +0100
++++ b/mm/vmstat.c 2019-06-19 19:34:58.749370222 +0100
+@@ -1163,6 +1163,9 @@
+ "nr_written",
+ "", /* nr_indirectly_reclaimable */
+
++#ifdef CONFIG_UKSM
++ "nr_uksm_zero_pages",
++#endif
+ /* enum writeback_stat_item counters */
+ "nr_dirty_threshold",
+ "nr_dirty_background_threshold",
diff --git a/sys-kernel/linux-sources-redcore-lts-legacy/linux-sources-redcore-lts-4.19.98.ebuild b/sys-kernel/linux-sources-redcore-lts-legacy/linux-sources-redcore-lts-4.19.98.ebuild
new file mode 100644
index 00000000..4195af2f
--- /dev/null
+++ b/sys-kernel/linux-sources-redcore-lts-legacy/linux-sources-redcore-lts-4.19.98.ebuild
@@ -0,0 +1,91 @@
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=6
+
+inherit eutils
+
+EXTRAVERSION="redcore-lts"
+KV_FULL="${PV}-${EXTRAVERSION}"
+KV_MAJOR="4.19"
+
+DESCRIPTION="Official Redcore Linux Kernel Sources"
+HOMEPAGE="https://redcorelinux.org"
+SRC_URI="https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz"
+
+KEYWORDS="~amd64"
+LICENSE="GPL-2"
+SLOT="${PVR}"
+IUSE=""
+
+RESTRICT="strip mirror"
+DEPEND="
+ app-arch/lz4
+ app-arch/xz-utils
+ sys-devel/autoconf
+ sys-devel/bc
+ sys-devel/make"
+RDEPEND="${DEPEND}"
+
+PATCHES=(
+ "${FILESDIR}"/"${KV_MAJOR}"-ata-fix-NCQ-LOG-strings-and-move-to-debug.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-drop_ancient-and-wrong-msg.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-enable_alx_wol.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-mute-pps_state_mismatch.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-nouveau-pascal-backlight.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-radeon_dp_aux_transfer_native-no-ratelimited_debug.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-linux-hardened.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-uksm-linux-hardened.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0001-MultiQueue-Skiplist-Scheduler-version-v0.180-linux-hardened.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0002-Fix-Werror-build-failure-in-tools.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0003-Make-preemptible-kernel-default.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0004-Expose-vmsplit-for-our-poor-32-bit-users.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0005-Create-highres-timeout-variants-of-schedule_timeout-.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0006-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0007-Convert-msleep-to-use-hrtimers-when-active.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0008-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0009-Replace-all-calls-to-schedule_timeout_interruptible-.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0010-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0011-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0012-Make-threaded-IRQs-optionally-the-default-which-can-.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0013-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0014-Swap-sucks.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0015-unfuck-MuQSS-on-linux-4_19_10+.patch
+ "${FILESDIR}"/"${KV_MAJOR}"-0016-unfuck-MuQSS-on-linux-4_19_20+.patch
+)
+
+
+S="${WORKDIR}"/linux-"${PV}"
+
+pkg_setup() {
+ export KBUILD_BUILD_USER="nexus"
+ export KBUILD_BUILD_HOST="nexus.redcorelinux.org"
+
+ export REAL_ARCH="$ARCH"
+ unset ARCH ; unset LDFLAGS #will interfere with Makefile if set
+}
+
+src_prepare() {
+ default
+ emake mrproper
+ sed -ri "s|^(EXTRAVERSION =).*|\1 -${EXTRAVERSION}|" Makefile
+ cp "${FILESDIR}"/"${KV_MAJOR}"-amd64.config .config
+ rm -rf $(find . -type f|grep -F \.orig)
+}
+
+src_compile() {
+ emake prepare modules_prepare
+}
+
+src_install() {
+ dodir usr/src/linux-"${KV_FULL}"
+ cp -ax "${S}"/* "${D}"usr/src/linux-"${KV_FULL}"
+}
+
+_kernel_sources_delete() {
+ rm -rf "${ROOT}"usr/src/linux-"${KV_FULL}"
+}
+
+pkg_postrm() {
+ _kernel_sources_delete
+}