diff options
Diffstat (limited to 'sys-apps/baselayout')
| -rw-r--r-- | sys-apps/baselayout/baselayout-2.7-r11.ebuild (renamed from sys-apps/baselayout/baselayout-2.7-r10.ebuild) | 50 | ||||
| -rw-r--r-- | sys-apps/baselayout/files/dmcryptcfg | 111 | ||||
| -rw-r--r-- | sys-apps/baselayout/files/dracutcfg | 14 | ||||
| -rw-r--r-- | sys-apps/baselayout/files/grubcfg | 63 | ||||
| -rw-r--r-- | sys-apps/baselayout/files/nmcfg | 3 | ||||
| -rw-r--r-- | sys-apps/baselayout/files/smbcfg | 20 |
6 files changed, 256 insertions, 5 deletions
diff --git a/sys-apps/baselayout/baselayout-2.7-r10.ebuild b/sys-apps/baselayout/baselayout-2.7-r11.ebuild index 16850ca1..1f771647 100644 --- a/sys-apps/baselayout/baselayout-2.7-r10.ebuild +++ b/sys-apps/baselayout/baselayout-2.7-r11.ebuild @@ -19,6 +19,9 @@ LICENSE="GPL-2" SLOT="0" IUSE="build kernel_FreeBSD kernel_linux +split-usr" +DEPEND="acct-group/smbshare" +RDEPEND="${DEPEND}" + pkg_setup() { multilib_layout } @@ -234,6 +237,38 @@ src_install() { dodir /usr/lib mv "${ED}"/etc/os-release "${ED}"/usr/lib || die dosym ../usr/lib/os-release /etc/os-release + + ############### Redcore Linux ############### + # + # issue.logo + rm "${ED}"/etc/issue.logo + # + # NetworkManager + dodir /etc/NetworkManager + insinto /etc/NetworkManager + newins "${FILESDIR}"/nmcfg NetworkManager.conf + # + # dracut + dodir /etc/dracut.conf.d + insinto /etc/dracut.conf.d + newins "${FILESDIR}"/dracutcfg dracut-redcore.conf + # + # grub + dodir /etc/default + insinto /etc/default + newins "${FILESDIR}"/grubcfg grub + # + # samba + dodir /etc/samba + insinto /etc/samba + newins "${FILESDIR}"/smbcfg smb.conf + keepdir var/lib/samba/usershare + # cryptsetup + dodir /etc/conf.d + insinto /etc/conf.d + newins ${FILESDIR}/dmcryptcfg dmcrypt + # + ############################################## } pkg_postinst() { @@ -257,11 +292,6 @@ pkg_postinst() { fi done - # Take care of the etc-update for the user - if [ -e "${EROOT}"etc/._cfg0000_redcore-release ] ; then - mv "${EROOT}"etc/._cfg0000_redcore-release "${EROOT}"etc/redcore-release || die - fi - # whine about users that lack passwords #193541 if [[ -e "${EROOT}"etc/shadow ]] ; then local bad_users=$(sed -n '/^[^:]*::/s|^\([^:]*\)::.*|\1|p' "${EROOT}"/etc/shadow) @@ -315,4 +345,14 @@ pkg_postinst() { ewarn "${EROOT}etc/env.d/00basic is now ${EROOT}etc/env.d/50baselayout" ewarn "Please migrate your changes." fi + + ############### Redcore Linux ############### + mv "${EROOT}"etc/._cfg????_redcore-release "${EROOT}"etc/redcore-release || die + rm -rf "${EROOT}"etc/dracut.conf.d/._cfg????_dracut-redcore.conf + rm -rf "${EROOT}"etc/default/._cfg????_grub + rm -rf "${EROOT}"etc/samba/._cfg????_smb.conf + rm -rf "${EROOT}"etc/conf.d/._cfg???_dmcrypt + chown root:smbshare /var/lib/samba/usershare + chmod 1770 /var/lib/samba/usershare + ############################################ } diff --git a/sys-apps/baselayout/files/dmcryptcfg b/sys-apps/baselayout/files/dmcryptcfg new file mode 100644 index 00000000..642ff087 --- /dev/null +++ b/sys-apps/baselayout/files/dmcryptcfg @@ -0,0 +1,111 @@ +# /etc/conf.d/dmcrypt + +# For people who run dmcrypt on top of some other layer (like raid), +# use rc_need to specify that requirement. See the runscript(8) man +# page for more information. + +#-------------------- +# Instructions +#-------------------- + +# Note regarding the syntax of this file. This file is *almost* bash, +# but each line is evaluated separately. Separate swaps/targets can be +# specified. The init-script which reads this file assumes that a +# swap= or target= line starts a new section, similar to lilo or grub +# configuration. + +# Note when using gpg keys and /usr on a separate partition, you will +# have to copy /usr/bin/gpg to /bin/gpg so that it will work properly +# and ensure that gpg has been compiled statically. +# See http://bugs.gentoo.org/90482 for more information. + +# Note that the init-script which reads this file detects whether your +# partition is LUKS or not. No mkfs is run unless you specify a makefs +# option. + +# Global options: +#---------------- + +# How long to wait for each timeout (in seconds). +dmcrypt_key_timeout=1 + +# Max number of checks to perform (see dmcrypt_key_timeout). +#dmcrypt_max_timeout=300 + +# Number of password retries. +dmcrypt_retries=5 + +# Arguments: +#----------- +# target=<name> == Mapping name for partition. +# swap=<name> == Mapping name for swap partition. +# source='<dev>' == Real device for partition. +# Note: You can (and should) specify a tag like UUID +# for blkid (see -t option). This is safer than using +# the full path to the device. +# key='</path/to/keyfile>[:<mode>]' == Fullpath from / or from inside removable media. +# remdev='<dev>' == Device that will be assigned to removable media. +# gpg_options='<opts>' == Default are --quiet --decrypt +# options='<opts>' == cryptsetup, for LUKS you can only use --readonly +# loop_file='<file>' == Loopback file. +# Note: If you omit $source, then a free loopback will +# be looked up automatically. +# pre_mount='cmds' == commands to execute before mounting partition. +# post_mount='cmds' == commands to execute after mounting partition. +#----------- +# Supported Modes +# gpg == decrypt and pipe key into cryptsetup. +# Note: new-line character must not be part of key. +# Command to erase \n char: 'cat key | tr -d '\n' > cleanKey' + +#-------------------- +# dm-crypt examples +#-------------------- + +## swap +# Swap partitions. These should come first so that no keys make their +# way into unencrypted swap. +# If no options are given, they will default to: -c aes -h sha1 -d /dev/urandom +# If no makefs is given then mkswap will be assumed +#swap=crypt-swap +#source='/dev/hda2' + +## /home with passphrase +#target=crypt-home +#source='/dev/hda5' + +## /home with regular keyfile +#target=crypt-home +#source='/dev/hda5' +#key='/full/path/to/homekey' + +## /home with gpg protected key +#target=crypt-home +#source='/dev/hda5' +#key='/full/path/to/homekey:gpg' + +## /home with regular keyfile on removable media(such as usb-stick) +#target=crypt-home +#source='/dev/hda5' +#key='/full/path/to/homekey' +#remdev='/dev/sda1' + +## /home with gpg protected key on removable media(such as usb-stick) +#target=crypt-home +#source='/dev/hda5' +#key='/full/path/to/homekey:gpg' +#remdev='/dev/sda1' + +## /tmp with regular keyfile +#target=crypt-tmp +#source='/dev/hda6' +#key='/full/path/to/tmpkey' +#pre_mount='/sbin/mkreiserfs -f -f ${dev}' +#post_mount='chown root:root ${mount_point}; chmod 1777 ${mount_point}' + +## Loopback file example +#target='crypt-loop-home' +#source='/dev/loop0' +#loop_file='/mnt/crypt/home' + +# The file must be terminated by a newline. Or leave this comment last. diff --git a/sys-apps/baselayout/files/dracutcfg b/sys-apps/baselayout/files/dracutcfg new file mode 100644 index 00000000..279e9bed --- /dev/null +++ b/sys-apps/baselayout/files/dracutcfg @@ -0,0 +1,14 @@ +# Host-Only mode: Install only what is needed for booting the local host instead of a generic host and generate host-specific configuration. +hostonly="no" + +# Combine early microcode with ramdisk. Uncomment the line bellow, and run "dracut -f" if you want early microcode update. +# early_microcode="yes" + +# Dracut modules to add when building the iniframfs +add_dracutmodules+=" drm plymouth " + +# Dracut modules to ommit when building the initramfs. +omit_dracutmodules+=" systemd systemd-initrd systemd-networkd dracut-systemd " + +# Make sure we have vboxvideo && qxl inside the initramfs (Virtualbox/Qemu) +add_drivers+=" vboxvideo qxl " diff --git a/sys-apps/baselayout/files/grubcfg b/sys-apps/baselayout/files/grubcfg new file mode 100644 index 00000000..b88083b2 --- /dev/null +++ b/sys-apps/baselayout/files/grubcfg @@ -0,0 +1,63 @@ +# Copyright 1999-2015 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Id$ +# +# To populate all changes in this file you need to regenerate your +# grub configuration file afterwards: +# 'grub2-mkconfig -o /boot/grub/grub.cfg' +# +# See the grub info page for documentation on possible variables and +# their associated values. + +GRUB_DISTRIBUTOR="Redcore" + +# Default menu entry +#GRUB_DEFAULT=0 + +# Boot the default entry this many seconds after the menu is displayed +GRUB_TIMEOUT="5" +#GRUB_TIMEOUT_STYLE=menu + +# Append parameters to the linux kernel command line for non-recovery entries +GRUB_CMDLINE_LINUX_DEFAULT="quiet loglevel=1 splash" + +# Uncomment to disable graphical terminal (grub-pc only) +#GRUB_TERMINAL=console + +# The resolution used on graphical terminal. +# Note that you can use only modes which your graphic card supports via VBE. +# You can see them in real GRUB with the command `vbeinfo'. +GRUB_GFXMODE="1366x768,1024x768,auto" + +# Set to 'text' to force the Linux kernel to boot in normal text +# mode, 'keep' to preserve the graphics mode set using +# 'GRUB_GFXMODE', 'WIDTHxHEIGHT'['xDEPTH'] to set a particular +# graphics mode, or a sequence of these separated by commas or +# semicolons to try several modes in sequence. +GRUB_GFXPAYLOAD_LINUX="keep" + +# Path to theme spec txt file. +# The starfield is by default provided with use truetype. +# NOTE: when enabling custom theme, ensure you have required font/etc. +GRUB_THEME="/usr/share/grub/themes/redcore/theme.txt" + +# Background image used on graphical terminal. +# Can be in various bitmap formats. +GRUB_BACKGROUND="/usr/share/grub/themes/redcore/terminal_bg.png" + +# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to kernel +#GRUB_DISABLE_LINUX_UUID=true + +# Uncomment to disable generation of recovery mode menu entries +#GRUB_DISABLE_RECOVERY=true + +# Uncomment to disable generation of the submenu and put all choices on +# the top-level menu. +# Besides the visual affect of no sub menu, this makes navigation of the +# menu easier for a user who can't see the screen. +#GRUB_DISABLE_SUBMENU=y + +# Uncomment to play a tone when the main menu is displayed. +# This is useful, for example, to allow users who can't see the screen +# to know when they can make a choice on the menu. +#GRUB_INIT_TUNE="60 800 1" diff --git a/sys-apps/baselayout/files/nmcfg b/sys-apps/baselayout/files/nmcfg new file mode 100644 index 00000000..a1c4b037 --- /dev/null +++ b/sys-apps/baselayout/files/nmcfg @@ -0,0 +1,3 @@ +[main] +plugins=keyfile +hostname-mode=none diff --git a/sys-apps/baselayout/files/smbcfg b/sys-apps/baselayout/files/smbcfg new file mode 100644 index 00000000..09276f94 --- /dev/null +++ b/sys-apps/baselayout/files/smbcfg @@ -0,0 +1,20 @@ +[global] + workgroup = WORKGROUP + server string = Samba Server + server role = standalone server + log file = /var/log/samba/log.%m + max log size = 50 + dns proxy = no + usershare path = /var/lib/samba/usershare + usershare max shares = 100 + usershare allow guests = yes + usershare owner only = yes + client max protocol = NT1 +[tmp] + comment = Temporary file space + path = /var/tmp + public = yes + writeable = yes + read only = no + printable = no + guest ok = yes |