Added ebuilds for kogaion desktop

1 files changed, 179 insertions, 0 deletions

diff --git a/net-wireless/compat-wireless/compat-wireless-3.6.2.ebuild b/net-wireless/compat-wireless/compat-wireless-3.6.2.ebuild
new file mode 100644
index 00000000..ce00dd28
--- /dev/null
+++ b/net-wireless/compat-wireless/compat-wireless-3.6.2.ebuild
@@ -0,0 +1,179 @@
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: $
+
+EAPI="4"
+inherit linux-mod linux-info versionator eutils
+
+##Stable
+
+MY_P=${P/_rc/-rc}
+
+MY_PV=v$(get_version_component_range 1-2)
+DESCRIPTION="Stable kernel pre-release wifi subsystem backport"
+HOMEPAGE="http://wireless.kernel.org/en/users/Download/stable"
+CRAZY_VERSIONING="1-snpc"
+SRC_URI="http://www.orbit-lab.org/kernel/${PN}-3-stable/${MY_PV}/${MY_P}-${CRAZY_VERSIONING}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~arm ~x86"
+IUSE="+alx ath9k_htc atheros_obey_crda bluetooth b43 b44 debugfs debug-driver full-debug injection livecd loadmodules noleds pax_kernel"
+
+DEPEND="!net-wireless/compat-wireless-builder"
+RDEPEND="${DEPEND}
+	>=sys-kernel/linux-firmware-20110219
+	virtual/udev"
+
+S="${WORKDIR}"/"${MY_P}"-${CRAZY_VERSIONING}
+RESTRICT="strip"
+
+CONFIG_CHECK="!DYNAMIC_FTRACE"
+
+pkg_setup() {
+	CONFIG_CHECK="~NET_SCHED"
+	CONFIG_CHECK="~IPW2200_PROMISCUOUS"
+	linux-mod_pkg_setup
+	kernel_is -lt 2 6 27 && die "kernel 2.6.27 or higher is required for compat wireless to be installed"
+	kernel_is -gt $(get_version_component_range 1) $(get_version_component_range 2) $(get_version_component_range 3) && die "The version of compat-wireless you are trying to install contains older modules than your kernel. Failing before downgrading your system."
+
+	#these things are not optional
+	linux_chkconfig_module MAC80211 || die "CONFIG_MAC80211 must be built as a _module_ !"
+	linux_chkconfig_module CFG80211 || die "CONFIG_CFG80211 must be built as a _module_ !"
+	linux_chkconfig_module LIBIPW || ewarn "CONFIG_LIBIPW really should be set or there will be no WEXT compat"
+
+	if use b43; then
+		linux_chkconfig_module SSB || die "You need to enable CONFIG_SSB or USE=-b43"
+	fi
+	if use b44; then
+		linux_chkconfig_module SSB || die "You need to enable CONFIG_SSB or USE=-b44"
+	fi
+}
+
+src_prepare() {
+	use pax_kernel && epatch "${FILESDIR}"/${PN}-3.6-zc-grsec.patch
+
+	#mcgrof said prep for inclusion in compat-wireless.git but this causes issues
+	#find "${S}" -name Makefile | xargs sed -i -e 's/export CONFIG_/export CONFIG_COMPAT_/' -e 's/COMPAT_COMPAT_/COMPAT_/' -e 's/CONFIG_COMPAT_CHECK/CONFIG_CHECK/'
+	#sed -i -e 's/export CONFIG_/export CONFIG_COMPAT_/' -e 's/COMPAT_COMPAT_/COMPAT_/' "${S}"/config.mk
+
+	# CONFIG_CFG80211_REG_DEBUG=y
+	sed -i '/CFG80211_REG_DEBUG/s/^# *//' "${S}"/config.mk
+
+	#this patch ignores the regulatory settings of an atheros card and uses what CRDA thinks is right
+	if use atheros_obey_crda; then
+		ewarn "You have enabled atheros_obey_crda which doesn't do what you think."
+		ewarn "This use flag will cause the eeprom of the card to be ignored and force"
+		ewarn "world roaming on the device until crda provides a valid regdomain."
+		ewarn "Short version, this is not a way to break the law, this will automatically"
+		ewarn "make your card less functional unless you set a proper regdomain with iw/crda."
+		epatch "${FILESDIR}"/ath_regd_optional.patch
+	fi
+
+	if use injection; then
+		epatch "${FILESDIR}"/4002_mac80211-2.6.29-fix-tx-ctl-no-ack-retry-count.patch
+		epatch "${FILESDIR}"/4004_zd1211rw-2.6.28.patch
+	#	epatch "${FILESDIR}"/mac80211.compat08082009.wl_frag+ack_v1.patch
+	#	epatch "${FILESDIR}"/4013-runtime-enable-disable-of-mac80211-packet-injection.patch
+		epatch "${FILESDIR}"/ipw2200-inject.3.4.6.patch
+	fi
+	use noleds && epatch "${FILESDIR}"/leds-disable-strict.patch
+	use debug-driver && sed -i '/DEBUG=y/s/^# *//' "${S}"/config.mk
+	use debugfs && sed -i '/DEBUGFS/s/^# *//' "${S}"/config.mk
+	if use full-debug; then
+		if use debug-driver ; then
+			sed -i '/CONFIG=/s/^# *//' "${S}"/config.mk
+		else
+			ewarn "Enabling full-debug includes debug-driver."
+			sed -i '/DEBUG=/s/^# *//' "${S}"/config.mk
+		fi
+	fi
+#	Disable B44 ethernet driver
+	if ! use b44; then
+		sed -i '/B44=/s/ */#/' "${S}"/config.mk || die "unable to disable B44 driver"
+		sed -i '/B44_PCI=/s/ */#/' "${S}"/config.mk || die "unable to disable B44 driver"
+	fi
+
+#	Disable B43 driver
+	if ! use b43; then
+		sed -i '/B43=/s/ */#/' "${S}"/config.mk || die "unable to disable B43 driver"
+		sed -i '/B43_PCI_AUTOSELECT=/s/ */#/' "${S}"/config.mk || die "unable to disable B43 driver"
+	#CONFIG_B43LEGACY=
+	fi
+
+#	fixme: there are more bluethooth settings in the config.mk
+	if ! use bluetooth; then
+		sed -i '/COMPAT_BLUETOOTH=/s/ */#/' "${S}"/config.mk || die "unable to disable bluetooth driver"
+		sed -i '/COMPAT_BLUETOOTH_MODULES=/s/ */#/' "${S}"/config.mk || die "unable to bluetooth B44 driver"
+	fi
+
+	#enable alx atheros ethernet driver
+	if use alx; then
+		sed -i 's/ALX=n/ALX=m/' "${S}"/config.mk || die "Failed to enable Atheros ALX driver"
+	else
+		sed -i 's/ALX=m/ALX=n/' "${S}"/config.mk || die "Failed to disable Atheros ALX driver"
+	fi
+
+	if use ath9k_htc; then
+		sed -i 's/ATH9K_HTC=n/ATH9K_HTC=m/' "${S}"/config.mk || die "Failed to enable Atheros 9k htc driver"
+	else
+		sed -i 's/ATH9K_HTC=m/ATH9K_HTC=n/' "${S}"/config.mk || die "Failed to disable Atheros 9k htc driver"
+	fi
+
+	#avoid annoying ACCESS DENIED sandbox errors
+	sed -i "s/\${MAKE} -C \${KLIB_BUILD} kernelversion/echo ${KV_FULL}/g" compat/scripts/gen-compat-config.sh || die "sed failed"
+	sed -i "s/shell \$(MAKE) -C \$(KLIB_BUILD) kernelversion/echo ${KV_FULL}/g" config.mk || die "sed failed"
+	sed -i "s/make -C \$KLIB_BUILD kernelversion/echo ${KV_FULL}/g" scripts/gen-compat-autoconf.sh || die "sed failed"
+}
+
+src_compile() {
+	addpredict "${KERNEL_DIR}"
+	set_arch_to_kernel
+	emake KLIB_BUILD="${DESTDIR}"/lib/modules/"${KV_FULL}"/build || die "emake failed"
+}
+
+src_install() {
+	for file in $(find -name \*.ko); do
+		insinto "/lib/modules/${KV_FULL}/updates/$(dirname ${file})"
+		doins "${file}"
+	done
+	dosbin scripts/athenable scripts/b43load scripts/iwl-enable \
+		scripts/madwifi-unload scripts/athload scripts/iwl-load \
+		scripts/b43enable scripts/unload.sh
+
+	dodir /usr/lib/compat-wireless
+	exeinto /usr/lib/compat-wireless
+	doexe scripts/modlib.sh
+
+	dodoc README
+	dodir /$(get_libdir)/udev/rules.d/
+	insinto /$(get_libdir)/udev/rules.d/
+	doins udev/50-compat_firmware.rules
+	exeinto /$(get_libdir)/udev/
+	doexe udev/compat_firmware.sh
+}
+
+pkg_postinst() {
+	update_depmod
+	update_moduledb
+
+	if use !livecd; then
+		if use loadmodules; then
+			einfo "Attempting to unload modules..."
+			/usr/sbin/unload.sh 2>&1 | grep -E FATAL && ewarn "Unable to remove running modules, system may be unhappy, reboot HIGHLY recommended!"
+			einfo "Triggering automatic reload of needed modules..."
+			/sbin/udevadm trigger
+			einfo "We have attempted to load your new modules for you, this may fail horribly, or may just cause a network hiccup."
+			einfo "If you experience any issues reboot is the simplest course of action."
+		fi
+	fi
+	if use !loadmodules; then
+		einfo "You didn't USE=loadmodules but you can still attempt to switch to the new drivers without reboot."
+		einfo "Run 'unload.sh' then 'udevadm trigger' to cause udev to load the	needed drivers."
+		einfo "If unload.sh fails for some reason you should be able to simply reboot to fix everything and load the new modules."
+	fi
+}
+
+pkg_postrm() {
+	remove_moduledb
+}