No audit programs here. deleting this sequence of ebuilds. will replace with compat and broadcom in a few moments

1 files changed, 0 insertions, 159 deletions

diff --git a/net-wireless/compat-wireless/compat-wireless-3.4_rc1-r1.ebuild b/net-wireless/compat-wireless/compat-wireless-3.4_rc1-r1.ebuild
deleted file mode 100644
index d570b2e5..00000000
--- a/net-wireless/compat-wireless/compat-wireless-3.4_rc1-r1.ebuild
+++ /dev/null
@@ -1,159 +0,0 @@
-# Copyright 1999-2011 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: $
-
-EAPI="4"
-inherit linux-mod linux-info versionator eutils
-
-##Stable
-
-MY_P=${P/_rc/-rc}
-
-MY_PV=v$(get_version_component_range 1-2)
-DESCRIPTION="Stable kernel pre-release wifi subsystem backport"
-HOMEPAGE="http://wireless.kernel.org/en/users/Download/stable"
-CRAZY_VERSIONING="2"
-SRC_URI="http://www.orbit-lab.org/kernel/${PN}-3.0-stable/${MY_PV}/${MY_P}-${CRAZY_VERSIONING}.tar.bz2"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~x86"
-IUSE="atheros_obey_crda bluetooth b43 b44 debugfs debug-driver full-debug injection livecd loadmodules noleds"
-
-DEPEND="!net-wireless/compat-wireless-builder"
-RDEPEND="${DEPEND}
-	livecd? ( =sys-kernel/linux-firmware-99999999 )
-		!livecd? ( >=sys-kernel/linux-firmware-20110709 )
-		virtual/udev"
-
-S="${WORKDIR}"/"${MY_P}"-${CRAZY_VERSIONING}
-RESTRICT="strip"
-
-CONFIG_CHECK="!DYNAMIC_FTRACE"
-
-pkg_setup() {
-	linux-mod_pkg_setup
-	kernel_is -lt 2 6 27 && die "kernel 2.6.27 or higher is required for compat wireless to be installed"
-	kernel_is -gt $(get_version_component_range 1) $(get_version_component_range 2) $(get_version_component_range 3) && die "The version of compat-wireless you are trying to install contains older modules than your kernel. Failing before downgrading your system."
-	if kernel_is -eq $(get_version_component_range 1) $(get_version_component_range 2) $(get_version_component_range 3); then
-		ewarn "Please report that you saw this message in #pentoo on irc.freenode.net along with your uname -r"
-	fi
-
-	#these things are not optional
-	linux_chkconfig_module MAC80211 || die "CONFIG_MAC80211 must be built as a _module_ !"
-	linux_chkconfig_module CFG80211 || die "CONFIG_CFG80211 must be built as a _module_ !"
-	linux_chkconfig_module LIBIPW || ewarn "CONFIG_LIBIPW really should be set or there will be no WEXT compat"
-
-	if use b43; then
-		linux_chkconfig_module SSB || die "You need to enable CONFIG_SSB or USE=-b43"
-	fi
-	if use b44; then
-		linux_chkconfig_module SSB || die "You need to enable CONFIG_SSB or USE=-b44"
-	fi
-}
-
-src_prepare() {
-	# CONFIG_CFG80211_REG_DEBUG=y
-	sed -i '/CFG80211_REG_DEBUG/s/^# *//' "${S}"/config.mk
-
-	#this patch ignores the regulatory settings of an atheros card and uses what CRDA thinks is right
-	if use atheros_obey_crda; then
-		ewarn "You have enabled atheros_obey_crda which doesn't do what you think."
-		ewarn "This use flag will cause the eeprom of the card to be ignored and force"
-		ewarn "world roaming on the device until crda provides a valid regdomain."
-		ewarn "Short version, this is not a way to break the law, this will automatically"
-		ewarn "make your card less functional unless you set a proper regdomain with iw/crda."
-		ewarn "Pausing for 10 secs..."
-		epatch "${FILESDIR}"/ath_regd_optional.patch
-	fi
-
-	if use injection; then
-		epatch "${FILESDIR}"/4002_mac80211-2.6.29-fix-tx-ctl-no-ack-retry-count.patch
-		epatch "${FILESDIR}"/4004_zd1211rw-2.6.28.patch
-	#	epatch "${FILESDIR}"/mac80211.compat08082009.wl_frag+ack_v1.patch
-	#	epatch "${FILESDIR}"/4013-runtime-enable-disable-of-mac80211-packet-injection.patch
-		epatch "${FILESDIR}"/ipw2200-inject.2.6.36.patch
-	fi
-	use noleds && epatch "${FILESDIR}"/leds-disable-strict.patch
-	use debug-driver && epatch "${FILESDIR}"/driver-debug.patch
-	use debugfs && sed -i '/DEBUGFS/s/^# *//' "${S}"/config.mk
-	if use full-debug; then
-		if use debug-driver ; then
-			sed -i '/CONFIG=/s/^# *//' "${S}"/config.mk
-		else
-			ewarn "Enabling full-debug includes debug-driver."
-			sed -i '/DEBUG=/s/^# *//' "${S}"/config.mk
-		fi
-	fi
-#	Disable B44 ethernet driver
-	if ! use b44; then
-		sed -i '/CONFIG_B44=/s/ */#/' "${S}"/config.mk || die "unable to disable B44 driver"
-		sed -i '/CONFIG_B44_PCI=/s/ */#/' "${S}"/config.mk || die "unable to disable B44 driver"
-	fi
-
-#	Disable B43 driver
-	if ! use b43; then
-		sed -i '/CONFIG_B43=/s/ */#/' "${S}"/config.mk || die "unable to disable B43 driver"
-		sed -i '/CONFIG_B43_PCI_AUTOSELECT=/s/ */#/' "${S}"/config.mk || die "unable to disable B43 driver"
-	#CONFIG_B43LEGACY=
-	fi
-
-#	fixme: there are more bluethooth settings in the config.mk
-	if ! use bluetooth; then
-		sed -i '/CONFIG_COMPAT_BLUETOOTH=/s/ */#/' "${S}"/config.mk || die "unable to disable bluetooth driver"
-		sed -i '/CONFIG_COMPAT_BLUETOOTH_MODULES=/s/ */#/' "${S}"/config.mk || die "unable to bluetooth B44 driver"
-	fi
-
-}
-
-src_compile() {
-	addpredict "${KERNEL_DIR}"
-	set_arch_to_kernel
-	emake KLIB_BUILD="${DESTDIR}"/lib/modules/"${KV_FULL}"/build || die "emake failed"
-}
-
-src_install() {
-	for file in $(find -name \*.ko); do
-		insinto "/lib/modules/${KV_FULL}/updates/$(dirname ${file})"
-		doins "${file}"
-	done
-	dosbin scripts/athenable scripts/b43load scripts/iwl-enable \
-		scripts/madwifi-unload scripts/athload scripts/iwl-load \
-		scripts/b43enable scripts/unload.sh
-
-	dodir /usr/lib/compat-wireless
-	exeinto /usr/lib/compat-wireless
-	doexe scripts/modlib.sh
-
-	dodoc README
-	dodir /$(get_libdir)/udev/rules.d/
-	insinto /$(get_libdir)/udev/rules.d/
-	doins udev/50-compat_firmware.rules
-	exeinto /$(get_libdir)/udev/
-	doexe udev/compat_firmware.sh
-}
-
-pkg_postinst() {
-	update_depmod
-	update_moduledb
-
-	if use !livecd; then
-		if use loadmodules; then
-			einfo "Attempting to unload modules..."
-			/usr/sbin/unload.sh 2>&1 | grep -E FATAL && ewarn "Unable to remove running modules, system may be unhappy, reboot HIGHLY recommended!"
-			einfo "Triggering automatic reload of needed modules..."
-			/sbin/udevadm trigger
-			einfo "We have attempted to load your new modules for you, this may fail horribly, or may just cause a network hiccup."
-			einfo "If you experience any issues reboot is the simplest course of action."
-		fi
-	fi
-	if use !loadmodules; then
-		einfo "You didn't USE=loadmodules but you can still attempt to switch to the new drivers without reboot."
-		einfo "Run 'unload.sh' then 'udevadm trigger' to cause udev to load the	needed drivers."
-		einfo "If unload.sh fails for some reason you should be able to simply reboot to fix everything and load the new modules."
-	fi
-}
-
-pkg_postrm() {
-	remove_moduledb
-}