Added ebuilds for kogaion desktop

1 files changed, 217 insertions, 0 deletions

diff --git a/net-wireless/compat-wireless-builder/compat-wireless-builder-3.4_rc7.ebuild b/net-wireless/compat-wireless-builder/compat-wireless-builder-3.4_rc7.ebuild
new file mode 100644
index 00000000..01fd1604
--- /dev/null
+++ b/net-wireless/compat-wireless-builder/compat-wireless-builder-3.4_rc7.ebuild
@@ -0,0 +1,217 @@
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: $
+
+EAPI="4"
+inherit git-2 linux-mod linux-info versionator eutils
+
+##Stable
+
+MY_P=${P/_rc/-rc}
+MY_PV=v${PV/_rc/-rc}
+MY_PVS=v$(get_version_component_range 1-2)
+DESCRIPTION="Stable kernel pre-release wifi subsystem backport"
+HOMEPAGE="http://wireless.kernel.org/en/users/Download/stable"
+CRAZY_VERSIONING="2"
+#SRC_URI="http://www.orbit-lab.org/kernel/${PN}-3.0-stable/${MY_PVS}/${MY_P}-${CRAZY_VERSIONING}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~arm ~x86"
+IUSE="+apply_cherrypicks +apply_crap +apply_stable apply_pending atheros_obey_crda bluetooth b43 b44 debugfs debug-driver full-debug injection livecd loadmodules +tarball noleds"
+
+DEPEND="!net-wireless/compat-wireless
+	apply_stable? ( dev-util/quilt )"
+RDEPEND="${DEPEND}
+	livecd? ( =sys-kernel/linux-firmware-99999999 )
+		!livecd? ( >=sys-kernel/linux-firmware-20110709 )
+		sys-fs/udev"
+
+#S="${WORKDIR}"/"${MY_P}"-${CRAZY_VERSIONING}
+S="${WORKDIR}/compat-wireless"
+RESTRICT="strip"
+
+CONFIG_CHECK="!DYNAMIC_FTRACE"
+
+pkg_setup() {
+	linux-mod_pkg_setup
+	kernel_is -lt 2 6 27 && die "kernel 2.6.27 or higher is required for compat wireless to be installed"
+	kernel_is -gt $(get_version_component_range 1) $(get_version_component_range 2) $(get_version_component_range 3) && die "The version of compat-wireless you are trying to install contains older modules than your kernel. Failing before downgrading your system."
+
+	#these things are not optional
+	linux_chkconfig_module MAC80211 || die "CONFIG_MAC80211 must be built as a _module_ !"
+	linux_chkconfig_module CFG80211 || die "CONFIG_CFG80211 must be built as a _module_ !"
+	linux_chkconfig_module LIBIPW || ewarn "CONFIG_LIBIPW really should be set or there will be no WEXT compat"
+
+	if use b43; then
+		linux_chkconfig_module SSB || die "You need to enable CONFIG_SSB or USE=-b43"
+	fi
+	if use b44; then
+		linux_chkconfig_module SSB || die "You need to enable CONFIG_SSB or USE=-b44"
+	fi
+}
+
+src_unpack() {
+	EGIT_REPO_URI="git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git"
+	EGIT_SOURCEDIR="${WORKDIR}/allstable"
+	EGIT_COMMIT="refs/tags/${MY_PV}"
+	git-2_src_unpack
+	unset EGIT_DIR
+	unset EGIT_COMMIT
+
+	EGIT_REPO_URI="git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git"
+	EGIT_SOURCEDIR="${WORKDIR}/linux-next"
+	git-2_src_unpack
+	unset EGIT_DIR
+
+	EGIT_REPO_URI="git://github.com/mcgrof/compat.git"
+	EGIT_SOURCEDIR="${WORKDIR}/compat"
+	EGIT_BRANCH="linux-$(get_version_component_range 1).$(get_version_component_range 2).y"
+	git-2_src_unpack
+	unset EGIT_DIR
+	unset EGIT_BRANCH
+
+	EGIT_REPO_URI="git://github.com/mcgrof/compat-wireless.git"
+	EGIT_SOURCEDIR="${WORKDIR}/compat-wireless"
+	EGIT_BRANCH="linux-$(get_version_component_range 1).$(get_version_component_range 2).y"
+	git-2_src_unpack
+	unset EGIT_DIR
+	unset EGIT_BRANCH
+}
+
+src_prepare() {
+	use apply_cherrypicks && apply="${apply} -n"
+	use apply_pending && apply="${apply} -p"
+	use apply_stable && apply="${apply} -s"
+	use apply_crap && apply="${apply} -c"
+
+	#CAUTION: on this line GIT_TREE asks for linux-next but wants stable
+	GIT_TREE="${WORKDIR}/allstable" GIT_COMPAT_TREE="${WORKDIR}/compat" NEXT_TREE="${WORKDIR}/linux-next" scripts/admin-update.sh -s refresh || die
+	#CAUTION: but on this line GIT_TREE wants stable
+	GIT_TREE="${WORKDIR}/allstable" GIT_COMPAT_TREE="${WORKDIR}/compat" NEXT_TREE="${WORKDIR}/linux-next" scripts/admin-update.sh${apply} || die
+
+	if use tarball; then
+		rm -rf .git/
+		set_arch_to_kernel
+        	emake KLIB_BUILD="${DESTDIR}"/lib/modules/"${KV_FULL}"/build clean
+		find ./ -type f -name *.orig | xargs rm -f
+		find ./ -type f -name *.rej  | xargs rm -f
+		use apply_cherrypicks && applied="${applied}n"
+		use apply_pending && applied="${applied}p"
+		#use apply_stable && applied="${applied}s"
+		use apply_crap && applied="${applied}c"
+		if [ "${applied}" ]; then
+			applied="-${applied}"
+		fi
+		tar -Jcf "${WORKDIR}"/${P}${applied}.tar.xz "${WORKDIR}/compat-wireless/" || die
+	fi
+
+	# CONFIG_CFG80211_REG_DEBUG=y
+	sed -i '/CFG80211_REG_DEBUG/s/^# *//' "${S}"/config.mk
+
+	#this patch ignores the regulatory settings of an atheros card and uses what CRDA thinks is right
+	if use atheros_obey_crda; then
+		ewarn "You have enabled atheros_obey_crda which doesn't do what you think."
+		ewarn "This use flag will cause the eeprom of the card to be ignored and force"
+		ewarn "world roaming on the device until crda provides a valid regdomain."
+		ewarn "Short version, this is not a way to break the law, this will automatically"
+		ewarn "make your card less functional unless you set a proper regdomain with iw/crda."
+		ewarn "Pausing for 10 secs..."
+		epatch "${FILESDIR}"/ath_regd_optional.patch
+	fi
+
+	if use injection; then
+		epatch "${FILESDIR}"/4002_mac80211-2.6.29-fix-tx-ctl-no-ack-retry-count.patch
+		epatch "${FILESDIR}"/4004_zd1211rw-2.6.28.patch
+	#	epatch "${FILESDIR}"/mac80211.compat08082009.wl_frag+ack_v1.patch
+	#	epatch "${FILESDIR}"/4013-runtime-enable-disable-of-mac80211-packet-injection.patch
+		epatch "${FILESDIR}"/ipw2200-inject.2.6.36.patch
+	fi
+	use noleds && epatch "${FILESDIR}"/leds-disable-strict.patch
+	use debug-driver && epatch "${FILESDIR}"/driver-debug.patch
+	use debugfs && sed -i '/DEBUGFS/s/^# *//' "${S}"/config.mk
+	if use full-debug; then
+		if use debug-driver ; then
+			sed -i '/CONFIG=/s/^# *//' "${S}"/config.mk
+		else
+			ewarn "Enabling full-debug includes debug-driver."
+			sed -i '/DEBUG=/s/^# *//' "${S}"/config.mk
+		fi
+	fi
+#	Disable B44 ethernet driver
+	if ! use b44; then
+		sed -i '/CONFIG_B44=/s/ */#/' "${S}"/config.mk || die "unable to disable B44 driver"
+		sed -i '/CONFIG_B44_PCI=/s/ */#/' "${S}"/config.mk || die "unable to disable B44 driver"
+	fi
+
+#	Disable B43 driver
+	if ! use b43; then
+		sed -i '/CONFIG_B43=/s/ */#/' "${S}"/config.mk || die "unable to disable B43 driver"
+		sed -i '/CONFIG_B43_PCI_AUTOSELECT=/s/ */#/' "${S}"/config.mk || die "unable to disable B43 driver"
+	#CONFIG_B43LEGACY=
+	fi
+
+#	fixme: there are more bluethooth settings in the config.mk
+	if ! use bluetooth; then
+		sed -i '/CONFIG_COMPAT_BLUETOOTH=/s/ */#/' "${S}"/config.mk || die "unable to disable bluetooth driver"
+		sed -i '/CONFIG_COMPAT_BLUETOOTH_MODULES=/s/ */#/' "${S}"/config.mk || die "unable to bluetooth B44 driver"
+	fi
+
+}
+
+src_compile() {
+	addpredict "${KERNEL_DIR}"
+	set_arch_to_kernel
+	emake KLIB_BUILD="${DESTDIR}"/lib/modules/"${KV_FULL}"/build || die "emake failed"
+}
+
+src_install() {
+	if use tarball; then
+		insinto /usr/share/${PN}
+		doins "${WORKDIR}"/${P}${applied}.tar.xz
+	fi
+
+	for file in $(find -name \*.ko); do
+		insinto "/lib/modules/${KV_FULL}/updates/$(dirname ${file})"
+		doins "${file}"
+	done
+	dosbin scripts/athenable scripts/b43load scripts/iwl-enable \
+		scripts/madwifi-unload scripts/athload scripts/iwl-load \
+		scripts/b43enable scripts/unload.sh
+
+	dodir /usr/lib/compat-wireless
+	exeinto /usr/lib/compat-wireless
+	doexe scripts/modlib.sh
+
+	dodoc README
+	dodir /$(get_libdir)/udev/rules.d/
+	insinto /$(get_libdir)/udev/rules.d/
+	doins udev/50-compat_firmware.rules
+	exeinto /$(get_libdir)/udev/
+	doexe udev/compat_firmware.sh
+}
+
+pkg_postinst() {
+	update_depmod
+	update_moduledb
+
+	if use !livecd; then
+		if use loadmodules; then
+			einfo "Attempting to unload modules..."
+			/usr/sbin/unload.sh 2>&1 | grep -E FATAL && ewarn "Unable to remove running modules, system may be unhappy, reboot HIGHLY recommended!"
+			einfo "Triggering automatic reload of needed modules..."
+			/sbin/udevadm trigger
+			einfo "We have attempted to load your new modules for you, this may fail horribly, or may just cause a network hiccup."
+			einfo "If you experience any issues reboot is the simplest course of action."
+		fi
+	fi
+	if use !loadmodules; then
+		einfo "You didn't USE=loadmodules but you can still attempt to switch to the new drivers without reboot."
+		einfo "Run 'unload.sh' then 'udevadm trigger' to cause udev to load the	needed drivers."
+		einfo "If unload.sh fails for some reason you should be able to simply reboot to fix everything and load the new modules."
+	fi
+}
+
+pkg_postrm() {
+	remove_moduledb
+}