Added ebuilds for kogaion desktop

48 files changed, 5052 insertions, 0 deletions

diff --git a/app-misc/rogentoslive-tools/files/1.0/bashlogin b/app-misc/rogentoslive-tools/files/1.0/bashlogin
new file mode 100755
index 00000000..34689189
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/bashlogin
@@ -0,0 +1,6 @@
+#!/bin/bash
+
+cat /etc/motd 2>/dev/null
+cd /root
+[[ -e .bash_profile ]] && source .bash_profile
+exec -l /bin/bash -i
diff --git a/app-misc/rogentoslive-tools/files/1.0/cdeject b/app-misc/rogentoslive-tools/files/1.0/cdeject
new file mode 100644
index 00000000..6d56f043
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/cdeject
@@ -0,0 +1,23 @@
+#!/sbin/runscript
+# Copyright (c) 2010 Fabio Erculiani <lxnay@sabayon.org>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Eject LiveCD/DVD at live system shutdown/reboot"
+
+depend()
+{
+	after *
+}
+
+start()
+{
+	is_live=$(cat /proc/cmdline | grep cdroot)
+	if [ -n "${is_live}" ]; then
+		cdrom_dev=$(cat /proc/mounts | grep " /mnt/cdrom " | cut -d" " -f 1)
+		# check if /mnt/cdrom device is a cdrom device
+		if [ "${cdrom_dev}" = /dev/sr* ] || [ "${cdrom_dev}" = /dev/cdrom* ]; then
+			eject -mp "${cdrom_dev}" &> /dev/null
+		fi
+	fi
+	eend 0
+}
diff --git a/app-misc/rogentoslive-tools/files/1.0/installer-gui b/app-misc/rogentoslive-tools/files/1.0/installer-gui
new file mode 100755
index 00000000..d8fd3dc0
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/installer-gui
@@ -0,0 +1,26 @@
+#!/sbin/runscript
+# Copyright 2006 Sabayon Linux
+# Distributed under the terms of the GNU General Public License v2
+
+depend() {
+    before xdm      
+    after rogentos
+    need dbus
+}
+
+start() {
+
+	source /sbin/rogentos-functions.sh
+
+        if sabayon_is_gui_install; then
+                ebegin "Rogentos Linux GUI Installer service"
+		# Enable autologin
+		sabayon_setup_autologin
+		# Setup GUI installer
+		sabayon_setup_gui_installer
+		eend 0
+	fi
+
+	return 0
+
+}
diff --git a/app-misc/rogentoslive-tools/files/1.0/installer-text b/app-misc/rogentoslive-tools/files/1.0/installer-text
new file mode 100755
index 00000000..ce431e53
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/installer-text
@@ -0,0 +1,21 @@
+#!/sbin/runscript
+# Copyright 2006 Sabayon Linux
+# Distributed under the terms of the GNU General Public License v2
+
+depend() {
+    after *      
+}
+
+start() {
+
+	source /sbin/rogentos-functions.sh
+
+	if sabayon_is_text_install; then
+                ebegin "Rogentos Linux Text Installer service"
+	        eend 0
+		sabayon_setup_text_installer
+	fi
+
+
+
+}
diff --git a/app-misc/rogentoslive-tools/files/1.0/livecd-functions.sh b/app-misc/rogentoslive-tools/files/1.0/livecd-functions.sh
new file mode 100755
index 00000000..b65a5f80
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/livecd-functions.sh
@@ -0,0 +1,634 @@
+#!/bin/bash
+
+# Global Variables:
+#    CDBOOT                  -- is booting off CD
+#    LIVECD_CONSOLE          -- console that is specified on commandline 
+#                            -- (ttyS0, etc) Only defined if passed to kernel
+#    LIVECD_CONSOLE_BAUD     -- console baudrate specified
+#    LIVECD_CONSOLE_PARITY   -- console parity specified
+#    LIVECD_CONSOLE_DATABITS -- console databits specified
+
+[[ ${RC_GOT_FUNCTIONS} != "yes" ]] && \
+	[[ -e /etc/init.d/functions.sh ]] && \
+	source /etc/init.d/functions.sh
+
+# emulating einfo since it's not always available from functions.sh
+# FIXME: fix functions.sh
+einfo() {
+	[[ -x "/lib/rc/bin/einfo" ]] && /lib/rc/bin/einfo "${1}"\
+		|| echo "* ${1}"
+}
+
+livecd_parse_opt() {
+	case "$1" in
+		*\=*)
+			echo "$1" | cut -f2 -d=
+		;;
+	esac
+}
+
+livecd_check_root() {
+	if [ "$(whoami)" != "root" ]
+	then
+		echo "ERROR: must be root to continue"
+		return 1
+	fi
+}
+
+livecd_get_cmdline() {
+	echo "0" > /proc/sys/kernel/printk
+	CMDLINE=$(cat /proc/cmdline)
+	export CMDLINE
+}
+
+no_gl() {
+#	einfo "If you have a card that you know is supported by either the ATI or"
+#	einfo "NVIDIA binary drivers, please file a bug with the output of lspci"
+#	einfo "on http://bugs.gentoo.org so we can resolve this."
+	GLTYPE=xorg-x11
+}
+
+ati_gl() {
+	einfo "ATI card detected."
+	if [ -e /usr/lib/xorg/modules/drivers/fglrx_drv.so ] \
+	|| [ -e /usr/lib/modules/drivers/fglrx_drv.so ]
+	then
+		GLTYPE=ati
+	else
+		GLTYPE=xorg-x11
+	fi
+}
+
+nv_gl() {
+	einfo "NVIDIA card detected."
+	if [ -e /usr/lib/xorg/modules/drivers/nvidia_drv.so ] \
+	|| [ -e /usr/lib/modules/drivers/nvidia_drv.so ]
+	then
+		GLTYPE=nvidia
+	else
+		GLTYPE=xorg-x11
+	fi
+}
+
+nv_no_gl() {
+	einfo "NVIDIA card detected."
+	echo
+	if [ -e /usr/lib/xorg/modules/drivers/nvidia_drv.so ] \
+	|| [ -e /usr/lib/modules/drivers/nvidia_drv.so ]
+	then
+		einfo "This card is not supported by the latest version of the NVIDIA"
+		einfo "binary drivers.  Switching to the X server's driver instead."
+	fi
+	GLTYPE=xorg-x11
+	sed -i 's/nvidia/nv/' /etc/X11/xorg.conf
+}
+
+get_video_cards() {
+	[ -x /sbin/lspci ] && VIDEO_CARDS="$(/sbin/lspci | grep ' VGA ')"
+	[ -x /usr/sbin/lspci ] && VIDEO_CARDS="$(/usr/sbin/lspci | grep ' VGA ')"
+	#NUM_CARDS="$(echo ${VIDEO_CARDS} | wc -l)"
+	#if [ ${NUM_CARDS} -eq 1 ] # Disabled to support NVIDIA SLI devices
+	#then
+		NVIDIA=$(echo ${VIDEO_CARDS} | grep -i "nVidia Corporation")
+		ATI=$(echo ${VIDEO_CARDS} | grep -i "ATI Technologies")
+		if [ -n "${NVIDIA}" ]
+		then
+			# Always set NVIDIA OpenGL, since it's stupid doing the contrary because:
+			# there's no X.Org free driver that supports OpenGL through MESA
+			nv_gl
+		elif [ -n "${ATI}" ]
+		then
+			ATI_CARD=$(echo ${ATI} | awk 'BEGIN {RS=" "} /(R|RV|RS|M)[0-9]+/ {print $1}')
+			if [ $(echo ${ATI_CARD} | grep S) ]
+			then
+				ATI_CARD_OUT=$(echo ${ATI_CARD} | cut -dS -f2)
+			elif [ $(echo ${ATI_CARD} | grep V) ]
+			then
+				ATI_CARD_OUT=$(echo ${ATI_CARD} | cut -dV -f2)
+			elif [ $(echo ${ATI_CARD} | grep M)  ]
+			then
+				# ATI Technologies Inc. M52 [ ATI Mobility Radeon X1300 ]
+				ATI_CARD_OUT=$(echo ${ATI_CARD} | cut -dM -f2)
+			else
+				ATI_CARD_OUT=$(echo ${ATI_CARD} | cut -dR -f2)
+			fi
+
+			if [ -n "${ATI_CARD_OUT}" ] && [ ${ATI_CARD_OUT} -ge 300 ]
+			then
+				ati_gl
+			elif [ -n "${ATI_CARD_OUT}" ] && [ -n "`echo ${ATI_CARD} | grep M`" ]
+			then
+				# this is an ATI Mxx card
+				ati_gl
+			# >8.29.6 does not support R200 anymore
+			elif [ -n "${ATI_CARD_OUT}" ] && [ ${ATI_CARD_OUT} -ge 200 ]
+			then
+				no_gl
+			else
+				# set ATI OpenGL anyway
+				ati_gl
+			fi
+		else
+			no_gl
+		fi
+	#fi
+}
+
+livecd_config_wireless() {
+	cd /tmp/setup.opts
+	[ -x /usr/sbin/iwconfig ] && iwconfig=/usr/sbin/iwconfig
+	[ -x /sbin/iwconfig ] && iwconfig=/sbin/iwconfig
+	dialog --title "SSID" --inputbox "Please enter your SSID, or leave blank for selecting the nearest open network" 20 50 2> ${iface}.SSID
+	SSID=$(tail -n 1 ${iface}.SSID)
+	if [ -n "${SSID}" ]
+	then
+		dialog --title "WEP (Part 1)" --menu "Does your network use encryption?" 20 60 7 1 "Yes" 2 "No" 2> ${iface}.WEP
+		WEP=$(tail -n 1 ${iface}.WEP)
+		case ${WEP} in
+			1)
+				dialog --title "WEP (Part 2)" --menu "Are you entering your WEP key in HEX or ASCII?" 20 60 7 1 "HEX" 2 "ASCII" 2> ${iface}.WEPTYPE
+				WEP_TYPE=$(tail -n 1 ${iface}.WEPTYPE)
+				case ${WEP_TYPE} in
+					1)
+						dialog --title "WEP (Part 3)" --inputbox "Please enter your WEP key in the form of XXXX-XXXX-XX for 64-bit or XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX for 128-bit" 20 50 2> ${iface}.WEPKEY
+						WEP_KEY=$(tail -n 1 ${iface}.WEPKEY)
+						if [ -n "${WEP_KEY}" ]
+						then
+							${iwconfig} ${iface} essid "${SSID}"
+							${iwconfig} ${iface} key "${WEP_KEY}"
+						fi
+					;;
+					2)
+						dialog --title "WEP (Part 3)" --inputbox "Please enter your WEP key in ASCII form.  This should be 5 or 13 characters for either 64-bit or 128-bit encryption, repectively" 20 50 2> ${iface}.WEPKEY
+						WEP_KEY=$(tail -n 1 ${iface}.WEPKEY)
+						if [ -n "${WEP_KEY}" ]
+						then
+							${iwconfig} ${iface} essid "${SSID}"
+							${iwconfig} ${iface} key "s:${WEP_KEY}"
+						fi
+					;;
+				esac
+			;;
+			2)
+				${iwconfig} ${iface} essid "${SSID}"
+				${iwconfig} ${iface} key off
+			;;
+		esac
+	fi
+}
+
+livecd_write_wireless_conf() {
+	cd /tmp/setup.opts
+	SSID=$(tail -n 1 ${iface}.SSID)
+	if [ -n "${SSID}" ]
+	then
+		echo "" >> /etc/conf.d/net
+		echo "# This wireless configuration file was built by net-setup" > /etc/conf.d/net
+		WEP=$(tail -n 1 ${iface}.WEPTYPE)
+		case ${WEP} in
+			1)
+				WEP_TYPE=$(tail -n 1 ${iface}.WEPTYPE)
+				if [ -n "${WEP_TYPE}" ]
+				then
+					WEP_KEY=$(tail -n 1 ${iface}.WEPKEY)
+					if [ -n "${WEP_KEY}" ]
+					then
+						SSID_TRANS=$(echo ${SSID//[![:word:]]/_})
+						case ${WEP_TYPE} in
+							1)
+								echo "key_${SSID_TRANS}=\"${WEP_KEY} enc open\"" >> /etc/conf.d/net
+							;;
+							2)
+								echo "key_${SSID_TRANS}=\"s:${WEP_KEY} enc open\"" >> /etc/conf.d/net
+							;;
+						esac
+					fi
+				fi
+			;;
+			2)
+				:
+			;;
+		esac
+		echo "preferred_aps=( \"${SSID}\" )" >> /etc/conf.d/net
+		echo "associate_order=\"forcepreferredonly\"" >> /etc/conf.d/net
+	fi
+}
+
+livecd_config_ip() {
+	cd /tmp/setup.opts
+	dialog --title "TCP/IP setup" --menu "You can use DHCP to automatically configure a network interface or you can specify an IP and related settings manually. Choose one option:" 20 60 7 1 "Use DHCP to auto-detect my network settings" 2 "Specify an IP address manually" 2> ${iface}.DHCP
+	DHCP=$(tail -n 1 ${iface}.DHCP)
+	case ${DHCP} in
+		1)
+			/sbin/dhclient -q -r -nw ${iface} &
+		;;
+		2)
+			dialog --title "IP address" --inputbox "Please enter an IP address for ${iface}:" 20 50 "192.168.1.1" 2> ${iface}.IP
+			IP=$(tail -n 1 ${iface}.IP)
+			BC_TEMP=$(echo $IP|cut -d . -f 1).$(echo $IP|cut -d . -f 2).$(echo $IP|cut -d . -f 3).255
+			dialog --title "Broadcast address" --inputbox "Please enter a Broadcast address for ${iface}:" 20 50 "${BC_TEMP}" 2> ${iface}.BC
+			BROADCAST=$(tail -n 1 ${iface}.BC)
+			dialog --title "Network mask" --inputbox "Please enter a Network Mask for ${iface}:" 20 50 "255.255.255.0" 2> ${iface}.NM
+			NETMASK=$(tail -n 1 ${iface}.NM)
+			dialog --title "Gateway" --inputbox "Please enter a Gateway for ${iface} (hit enter for none:)" 20 50 2> ${iface}.GW
+			GATEWAY=$(tail -n 1 ${iface}.GW)
+			dialog --title "DNS server" --inputbox "Please enter a name server to use (hit enter for none:)" 20 50 2> ${iface}.DNS
+			DNS=$(tail -n 1 ${iface}.DNS)
+			/sbin/ifconfig ${iface} ${IP} broadcast ${BROADCAST} netmask ${NETMASK}
+			if [ -n "${GATEWAY}" ]
+			then
+				/sbin/route add default gw ${GATEWAY} dev ${iface} netmask 0.0.0.0 metric 1
+			fi
+			if [ -n "${DNS}" ]
+			then
+				dialog --title "DNS Search Suffix" --inputbox "Please enter any domains which you would like to search on DNS queries (hit enter for none:)" 20 50 2> ${iface}.SUFFIX
+				SUFFIX=$(tail -n 1 ${iface}.SUFFIX)
+				echo "nameserver ${DNS}" > /etc/resolv.conf
+				if [ -n "${SUFFIX}" ]
+				then
+					echo "search ${SUFFIX}" >> /etc/resolv.conf
+				fi
+			fi
+		;;
+	esac
+}
+
+livecd_write_net_conf() {
+	cd /tmp/setup.opts
+	echo "# Rogentos Linux static network configuration tool" > /etc/conf.d/net
+	DHCP=$(tail -n 1 ${iface}.DHCP)
+	case ${DHCP} in
+		1)
+			echo "config_${iface}=\"dhcp\"" >> /etc/conf.d/net
+			echo "dhcp_${iface}=\"nosendhost\"" >> /etc/conf.d/net
+		;;
+		2)
+			IP=$(tail -n 1 ${iface}.IP)
+			BROADCAST=$(tail -n 1 ${iface}.BC)
+			NETMASK=$(tail -n 1 ${iface}.NM)
+			GATEWAY=$(tail -n 1 ${iface}.GW)
+			DNS="$(tail -n 1 ${iface}.DNS)"
+			DOMAIN="$(tail -n 1 ${iface}.SUFFIX)"
+			if [ -n "${IP}" -a -n "${BROADCAST}" -a -n "${NETMASK}" ]
+			then
+				echo "config_${iface}=\"${IP} netmask ${NETMASK} broadcast ${BROADCAST}\"" >> /etc/conf.d/net
+				if [ -n "${GATEWAY}" ]
+				then
+					echo "routes_${iface}=\"default via ${GATEWAY}\"" >> /etc/conf.d/net
+				fi
+				if [ -n "${DNS}" ]
+				then
+					echo "dns_servers_${iface}=\"${DNS}\"" >> /etc/conf.d/net
+				fi
+				if [ -n "${DOMAIN}" ]
+				then
+					echo "dns_search_${iface}=\"${DOMAIN}\"" >> /etc/conf.d/net
+				fi
+			fi
+		;;
+	esac
+}
+
+get_ifmac() {
+	local iface=$1
+
+	# Example: 00:01:6f:e1:7a:06
+	cat /sys/class/net/${iface}/address
+}
+
+
+get_ifdriver() {
+	local iface=$1
+
+	# Example: ../../../bus/pci/drivers/forcedeth (wanted: forcedeth)
+	local if_driver=$(readlink /sys/class/net/${iface}/device/driver)
+	basename ${if_driver}
+}
+
+get_ifbus() {
+	local iface=$1
+
+	# Example: ../../../bus/pci (wanted: pci)
+	# Example: ../../../../bus/pci (wanted: pci)
+	# Example: ../../../../../../bus/usb (wanted: usb)
+	local if_bus=$(readlink /sys/class/net/${iface}/device/bus)
+	basename ${if_bus}
+}
+
+livecd_rev_string() {
+	# /usr might not be mounted
+	local copy=${1}
+	len=${#copy}
+	for((i=$len-1;i>=0;i--)); do rev="$rev${copy:$i:1}"; done
+	echo ${rev}
+}
+
+get_ifproduct() {
+	local iface=$1
+	local bus=$(get_ifbus ${iface})
+	local if_pciaddr
+	local if_devname
+	local if_usbpath
+	local if_usbmanufacturer
+	local if_usbproduct
+
+	if [[ ${bus} == "pci" ]]
+	then
+		# Example: ../../../devices/pci0000:00/0000:00:0a.0 (wanted: 0000:00:0a.0)
+		# Example: ../../../devices/pci0000:00/0000:00:09.0/0000:01:07.0 (wanted: 0000:01:07.0)
+		if_pciaddr=$(readlink /sys/class/net/${iface}/device)
+		if_pciaddr=$(basename ${if_pciaddr})
+
+		# Example: 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
+		#  (wanted: nVidia Corporation CK804 Ethernet Controller)
+		if_devname=$(lspci -s ${if_pciaddr})
+		if_devname=${if_devname#*: }
+		if_devname=${if_devname%(rev *)}
+	fi
+
+	if [[ ${bus} == "usb" ]]
+	then
+		if_usbpath=$(readlink /sys/class/net/${iface}/device)
+		if_usbpath=/sys/class/net/${iface}/$(dirname ${if_usbpath})
+		if_usbmanufacturer=$(< ${if_usbpath}/manufacturer)
+		if_usbproduct=$(< ${if_usbpath}/product)
+
+		[[ -n ${if_usbmanufacturer} ]] && if_devname="${if_usbmanufacturer} "
+		[[ -n ${if_usbproduct} ]] && if_devname="${if_devname}${if_usbproduct}"
+	fi
+
+	if [[ ${bus} == "ieee1394" ]]
+	then
+		if_devname="IEEE1394 (FireWire) Network Adapter";
+	fi
+
+	echo ${if_devname}
+}
+
+get_ifdesc() {
+	local iface=$1
+	desc=$(get_ifproduct ${iface})
+	if [[ -n ${desc} ]]
+	then
+		echo $desc
+		return;
+	fi
+
+	desc=$(get_ifdriver ${iface})
+	if [[ -n ${desc} ]]
+	then
+		echo $desc
+		return;
+	fi
+
+	desc=$(get_ifmac ${iface})
+	if [[ -n ${desc} ]]
+	then
+		echo $desc
+		return;
+	fi
+
+	echo "Unknown"
+}
+
+show_ifmenu() {
+	local old_ifs="${IFS}"
+	local opts
+	IFS=""
+	for ifname in $(/sbin/ifconfig -a | grep "^[^ ]"); do
+		ifname="${ifname%% *}"
+		[[ ${ifname} == "lo" ]] && continue
+		opts="${opts} '${ifname}' '$(get_ifdesc ${ifname})'"
+	done
+	IFS="${old_ifs}"
+
+	eval dialog --menu \"Please select the interface that you wish to configure from the list below:\" 0 0 0 $opts 2>iface
+	[[ "$?" == "1" ]] && exit
+
+	iface=$(< iface)
+}
+
+show_ifconfirm() {
+	local iface=$1
+	local if_mac=$(get_ifmac ${iface})
+	local if_driver=$(get_ifdriver ${iface})
+	local if_bus=$(get_ifbus ${iface})
+	local if_product=$(get_ifproduct ${iface})
+
+	local text="Details for network interface ${iface} are shown below.\n\nInterface name: ${iface}\n"
+	[[ -n ${if_product} ]] && text="${text}Device: ${if_product}\n"
+	[[ -n ${if_mac} ]] && text="${text}MAC address: ${if_mac}\n"
+	[[ -n ${if_driver} ]] && text="${text}Driver: ${if_driver}\n"
+	[[ -n ${if_bus} ]] && text="${text}Bus type: ${if_bus}\n"
+	text="${text}\nIs this the interface that you wish to configure?"
+
+	if ! dialog --title "Interface details" --yesno "${text}" 15 70
+	then
+		result="no"
+	else
+		result="yes"
+	fi
+}
+
+livecd_console_settings() {
+	# scan for a valid baud rate
+	case "$1" in
+		300*)
+			LIVECD_CONSOLE_BAUD=300
+		;;
+		600*)
+			LIVECD_CONSOLE_BAUD=600
+		;;
+		1200*)
+			LIVECD_CONSOLE_BAUD=1200
+		;;
+		2400*)
+			LIVECD_CONSOLE_BAUD=2400
+		;;
+		4800*)
+			LIVECD_CONSOLE_BAUD=4800
+		;;
+		9600*)
+			LIVECD_CONSOLE_BAUD=9600
+		;;
+		14400*)
+			LIVECD_CONSOLE_BAUD=14400
+		;;
+		19200*)
+			LIVECD_CONSOLE_BAUD=19200
+		;;
+		28800*)
+			LIVECD_CONSOLE_BAUD=28800
+		;;
+		38400*)
+			LIVECD_CONSOLE_BAUD=38400
+		;;
+		57600*)
+			LIVECD_CONSOLE_BAUD=57600
+		;;
+		115200*)
+			LIVECD_CONSOLE_BAUD=115200
+		;;
+	esac
+	if [ "${LIVECD_CONSOLE_BAUD}" = "" ]
+	then
+		# If it's a virtual console, set baud to 38400, if it's a serial
+		# console, set it to 9600 (by default anyhow)
+		case ${LIVECD_CONSOLE} in 
+			tty[0-9])
+				LIVECD_CONSOLE_BAUD=38400
+			;;
+			*)
+				LIVECD_CONSOLE_BAUD=9600
+			;;
+		esac
+	fi
+	export LIVECD_CONSOLE_BAUD
+
+	# scan for a valid parity
+	# If the second to last byte is a [n,e,o] set parity
+	local parity
+	parity=$(livecd_rev_string $1 | cut -b 2-2)
+	case "$parity" in
+		[neo])
+			LIVECD_CONSOLE_PARITY=$parity
+		;;
+	esac
+	export LIVECD_CONSOLE_PARITY	
+
+	# scan for databits
+	# Only set databits if second to last character is parity
+	if [ "${LIVECD_CONSOLE_PARITY}" != "" ]
+	then
+		LIVECD_CONSOLE_DATABITS=$(livecd_rev_string $1 | cut -b 1)
+	fi
+	export LIVECD_CONSOLE_DATABITS
+	return 0
+}
+
+livecd_read_commandline() {
+	livecd_get_cmdline || return 1
+
+	for x in ${CMDLINE}
+	do
+		case "${x}" in
+			cdroot)
+				CDBOOT="yes"
+				RC_NO_UMOUNTS="^(/|/dev|/dev/pts|/lib/rcscripts/init.d|/proc|/proc/.*|/sys|/mnt/livecd|/newroot)$"
+				export CDBOOT RC_NO_UMOUNTS
+			;;
+			cdroot\=*)
+				CDBOOT="yes"
+				RC_NO_UMOUNTS="^(/|/dev|/dev/pts|/lib/rcscripts/init.d|/proc|/proc/.*|/sys|/mnt/livecd|/newroot)$"
+				export CDBOOT RC_NO_UMOUNTS
+			;;
+			console\=*)
+				local live_console
+				live_console=$(livecd_parse_opt "${x}")
+
+				# Parse the console line. No options specified if
+				# no comma
+				LIVECD_CONSOLE=$(echo ${live_console} | cut -f1 -d,)
+				if [ "${LIVECD_CONSOLE}" = "" ]
+				then
+					# no options specified
+					LIVECD_CONSOLE=${live_console}
+				else
+					# there are options, we need to parse them
+					local livecd_console_opts
+					livecd_console_opts=$(echo ${live_console} | cut -f2 -d,)
+					livecd_console_settings  ${livecd_console_opts}
+				fi
+				export LIVECD_CONSOLE
+			;;
+		esac
+	done
+	return 0
+}
+
+livecd_fix_inittab() {
+	if [ "${CDBOOT}" = "" ]
+	then
+		return 1
+	fi
+
+	# Create a backup
+	cp -f /etc/inittab /etc/inittab.old
+
+	# Comment out current getty settings
+	sed -i -e '/^c[0-9]/ s/^/#/' /etc/inittab
+	sed -i -e '/^s[01]/ s/^/#/' /etc/inittab
+
+	# SPARC & HPPA console magic
+	if [ "${HOSTTYPE}" = "sparc" -o "${HOSTTYPE}" = "hppa" -o "${HOSTTYPE}" = "ppc64" ]
+	then
+		# Mount openprom tree for user debugging purposes
+		if [ "${HOSTTYPE}" = "sparc" ]
+		then
+			mount -t openpromfs none /proc/openprom
+		fi
+
+		# SPARC serial port A, HPPA mux / serial
+		if [ -c "/dev/ttyS0" ]
+		then
+			LIVECD_CONSOLE_BAUD=$(stty -F /dev/ttyS0 speed)
+			echo "s0:12345:respawn:/sbin/agetty -nl /bin/bashlogin ${LIVECD_CONSOLE_BAUD} ttyS0 vt100" >> /etc/inittab
+		fi
+		# HPPA software PDC console (K-models)
+		if [ "${LIVECD_CONSOLE}" = "ttyB0" ]
+		then
+			mknod /dev/ttyB0 c 11 0
+			LIVECD_CONSOLE_BAUD=$(stty -F /dev/ttyB0 speed)
+			echo "b0:12345:respawn:/sbin/agetty -nl /bin/bashlogin ${LIVECD_CONSOLE_BAUD} ttyB0 vt100" >> /etc/inittab
+		fi
+		# FB / STI console
+		if [ -c "/dev/vc/1" -o -c "/dev/tts/1" -o -c "/dev/tty2" ]
+		then
+			MODEL_NAME=$(cat /proc/cpuinfo |grep "model name"|sed 's/.*: //')
+			if [ "${MODEL_NAME}" = "UML" ]
+			then
+			    for x in 0 1 2 3 4 5 6
+			    do
+				    echo "c${x}:12345:respawn:/sbin/mingetty --noclear --autologin root tty${x}" >> /etc/inittab
+			    done
+			else
+			    for x in 1 2 3 4 5 6
+			    do
+				    echo "c${x}:12345:respawn:/sbin/mingetty --noclear --autologin root tty${x}" >> /etc/inittab
+			    done
+			fi
+		fi
+		if [ -c "/dev/hvc0" ]
+		then
+			einfo "Adding hvc console to inittab"
+			echo "s0:12345:respawn:/sbin/agetty -nl /bin/bashlogin 9600 hvc0 vt320" >> /etc/inittab
+		fi
+
+
+	# The rest...
+	else
+		for x in 1 2 3 4 5 6
+		do
+			echo "c${x}:12345:respawn:/sbin/agetty -nl /bin/bashlogin 38400 tty${x} linux" >> /etc/inittab
+		done
+	fi
+
+	# EFI-based machines should automatically hook up their console lines
+	if dmesg | grep -q '^Adding console on'
+	then
+		dmesg | grep '^Adding console on' | while read x; do
+			line=`echo "$x" | cut -d' ' -f4`
+			id=e`echo "$line" | grep -o '.\{1,3\}$'`
+			[ "${line}" = "${LIVECD_CONSOLE}" ] && continue  # already setup above
+			case "$x" in
+				*options\ \'[0-9]*) speed=`echo "$x" | sed "s/.*options '//; s/[^0-9].*//"` ;;
+				*) speed=9600 ;;  # choose a default, only matters if it is serial
+			esac
+			echo "$id:12345:respawn:/sbin/agetty -nl /bin/bashlogin ${speed} ${line} vt100" >> /etc/inittab
+		done
+	fi
+
+	# force reread of inittab
+	kill -HUP 1
+	return 0
+}
diff --git a/app-misc/rogentoslive-tools/files/1.0/livespawn b/app-misc/rogentoslive-tools/files/1.0/livespawn
new file mode 100644
index 00000000..44d7257e
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/livespawn
@@ -0,0 +1,10 @@
+#!/usr/bin/python
+import sys, os, subprocess
+args = sys.argv[1:]
+if not args: raise SystemExit(1)
+
+pid = os.fork()
+if pid == 0:
+	p = subprocess.Popen(args)
+	rc = p.wait()
+	raise SystemExit(rc)
diff --git a/app-misc/rogentoslive-tools/files/1.0/logscript.sh b/app-misc/rogentoslive-tools/files/1.0/logscript.sh
new file mode 100755
index 00000000..4fb06d6b
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/logscript.sh
@@ -0,0 +1,111 @@
+#!/bin/sh
+#requires the following
+# free, hostname, grep, cut, awk, uname
+
+HOSTNAME=`hostname -s`
+IP_ADDRS=`ifconfig | grep 'inet addr' | grep -v '255.0.0.0' | cut -f2 -d':' | awk '{print $1}'`
+IP_ADDRS=`echo $IP_ADDRS | sed 's/\n//g'`
+
+#memory
+MEMORY=`free | grep Mem | awk '{print $2}'`
+
+#cpu info
+CPUS=`cat /proc/cpuinfo | grep processor | wc -l | awk '{print $1}'`
+CPU_MHZ=`cat /proc/cpuinfo | grep MHz | tail -n1 | awk '{print $4}'`
+CPU_TYPE=`cat /proc/cpuinfo | grep vendor_id | tail -n 1 | awk '{print $3}'`
+CPU_TYPE2=`uname -m`
+CPU_TYPE3=`uname -p`
+
+OS_NAME=`uname -s`
+OS_OS=`uname -o`
+OS_KERNEL=`uname -r`
+OS_RELEASE=`cat /etc/rogentos-edition`
+OS_EDITION=`cat /etc/rogentos-edition`
+ESELECT_KERNEL=`eselect --no-color kernel list`
+ESELECT_OPENGL=`eselect --no-color opengl list`
+ESELECT_JAVA=`eselect --no-color java-vm list`
+ESELECT_JAVAP=`eselect --no-color java-nsplugin list`
+
+EQUO=`equo --version`
+PORTAGE=`emerge --version`
+
+UPTIME=`uptime`
+MEM=`free -t -m`
+SPACE=`df -TH`
+
+PCIINFO=`lspci | cut -f3 -d':'`
+#Another way to do it
+#PCIINFO=`lspci | cut -f3 -d':'`
+
+LSUSB=`lsusb`
+LSMOD=`lsmod`
+#print it out
+echo "$HOSTNAME"
+echo "--------------------------------------------------------------------"
+echo "Hostname         : $HOSTNAME"
+echo "Host Address     : $IP_ADDRS"
+echo "Main Memory      : $MEMORY"
+echo "Number of CPUs   : $CPUS"
+echo "CPU Type         : $CPU_TYPE2 $CPU_TYPE3 $CPU_MHZ MHz"
+echo "OS Release       : $OS_RELEASE"
+echo "OS Edition       : $OS_EDITION"
+echo "Kernel Name      : $OS_NAME $OS_OS"
+echo "Kernel Version   : $OS_KERNEL"
+echo "Uptime           : $UPTIME"
+echo "--------------------------------------------------------------------"
+echo
+echo "Entropy Version"
+echo "$EQUO"
+echo
+echo "Portage Version"
+echo "$PORTAGE"
+echo "--------------------------------------------------------------------"
+echo
+echo "Kernel List"
+echo "$ESELECT_KERNEL"
+echo "Your Kernel Should Be Set To:"
+echo "$OS_KERNEL"
+echo "Use eselect kernel set #"
+echo "--------------------------------------------------------------------"
+echo
+echo "OpenGL List"
+echo "$ESELECT_OPENGL"
+echo "The above should be set to your video card, see lspci"
+echo "Use eselect opengl set #"
+echo "--------------------------------------------------------------------"
+echo
+echo "Java VM List"
+echo "$ESELECT_JAVA"
+echo "Use java-config --set-system-vm #"
+echo "--------------------------------------------------------------------"
+echo
+echo "Java-nsplugin List"
+echo "$ESELECT_JAVAP"
+echo "Use eselect java-nsplugin set #"
+echo "--------------------------------------------------------------------"
+echo
+echo "Devices - lspci"
+echo "--------------------------------------------------------------------"
+echo "$PCIINFO"
+echo "--------------------------------------------------------------------"
+echo
+echo "Devices - lsmod"
+echo "--------------------------------------------------------------------"
+echo "$LSMOD"
+echo "--------------------------------------------------------------------"
+echo
+echo "Devices - lsusb"
+echo "--------------------------------------------------------------------"
+echo "$LSUSB"
+echo "--------------------------------------------------------------------"
+echo
+echo "Memory"
+echo "--------------------------------------------------------------------"
+echo "$MEM"
+echo "--------------------------------------------------------------------"
+echo
+echo "Disk Space"
+echo "--------------------------------------------------------------------"
+echo "$SPACE"
+echo "--------------------------------------------------------------------"
+echo
diff --git a/app-misc/rogentoslive-tools/files/1.0/net-setup b/app-misc/rogentoslive-tools/files/1.0/net-setup
new file mode 100755
index 00000000..e84de48b
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/net-setup
@@ -0,0 +1,65 @@
+#!/bin/bash
+# Copyright 1999-2005 Gentoo Foundation
+# Copyright 2006-2008 Fabio Erculiani
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo/src/livecd-tools/net-setup,v 1.19 2006/05/30 20:20:11 wolf31o2 Exp $
+
+if [ -f /sbin/livecd-functions.sh ]
+then
+	source /sbin/livecd-functions.sh
+else
+	echo "ERROR: /sbin/livecd-functions.sh could not be loaded!"
+	exit 1
+fi
+
+if [ ! -x $(which dialog) ]
+then
+	echo "ERROR: The dialog utility is required for net-setup.  Exiting!"
+	exit 1
+fi
+
+livecd_check_root || exit 1
+
+# Hide any potential error messages from the readlink/dirname/etc calls below
+exec 2>/dev/null
+
+if [ -z "${1}" ]
+then
+	show_ifmenu
+	echo $iface
+else
+	iface="${1}"
+fi
+
+[ ! -d /tmp/setup.opts ] && mkdir /tmp/setup.opts
+cd /tmp/setup.opts
+
+while true; do
+	show_ifconfirm $iface
+	[[ $result == "yes" ]] && break
+	show_ifmenu
+done
+
+# Show stderr again
+exec 2>/dev/stderr
+
+dialog --title "Network setup" --menu "This script is designed to setup both wired and wireless network settings.  All questions below apply to the ${iface} interface only.  Choose one option:" 20 60 7 1 "My network is wireless" 2 "My network is wired" 2> ${iface}.WIRED_WIRELESS
+WIRED_WIRELESS=$(tail -n 1 ${iface}.WIRED_WIRELESS)
+case ${WIRED_WIRELESS} in
+	1)
+		livecd_config_wireless
+		livecd_config_ip
+		livecd_write_wireless_conf
+		;;
+	2)
+		livecd_config_ip
+		;;
+	*)
+		exit 0
+		;;
+esac
+livecd_write_net_conf
+
+echo "Type \"ifconfig\" to make sure the interface was configured correctly."
+
+# vim: ts=4
diff --git a/app-misc/rogentoslive-tools/files/1.0/opengl-activator b/app-misc/rogentoslive-tools/files/1.0/opengl-activator
new file mode 100755
index 00000000..387dd10f
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/opengl-activator
@@ -0,0 +1,318 @@
+#!/bin/sh
+# Forked from eselect opengl Gentoo module - this is reaaaaaaaaaally faster
+# this is used only at Live time, to avoid the use of Portage
+# Copyright 2006-2008 Fabio Erculiani
+
+# Our data
+ENV_FILE="/etc/env.d/03opengl"
+PREFIX="/usr"
+DST_PREFIX="/usr"
+USE_PROFILE_HEADERS="no"
+ES_VALID_MULTILIB_DIRS="lib lib32 lib64"
+
+# list_libdirs PUBLIC
+# Returns a space separated list of libdirs available on this machine
+list_libdirs() {
+    local dir libdirs
+    libdirs=""
+    for dir in ${ES_VALID_MULTILIB_DIRS} ; do
+        if grep -q "^/${dir}\(\|/\)$" /etc/ld.so.conf &> /dev/null ; then
+            libdirs=( ${libdirs[@]} ${dir} )
+        fi
+    done
+    if [[ -z ${libdirs[@]} ]] ; then
+    	# Broken or non-existing ld.so.conf
+    	libdirs=( /lib* )
+	libdirs=( ${libdirs[@]/\/lib/lib} )
+    fi
+    echo "${libdirs[@]}"
+}
+
+# has test list
+# Return true if list contains test
+has() {
+    local test=${1} item
+    shift
+    for item in $@ ; do
+        [[ ${item} == ${test} ]] && return 0
+    done
+    return 1
+}
+
+# is_function function PUBLIC
+# Test whether function exists
+is_function() {
+    [[ $(type -t "${1}" ) == "function" ]]
+}
+
+# is_number PUBLIC
+# Returns true if and only if $1 is a positive whole number
+is_number() {
+    [[ -n ${1} ]] && [[ -z ${1//[[:digit:]]} ]]
+}
+
+get_current_implementation() {
+	local ret
+	local ldpath=$(cat ${ENV_FILE} | grep LDPATH | cut -d'"' -f 2)
+	
+	local opengl_profile=$(cat ${ENV_FILE} | grep OPENGL_PROFILE | cut -d'"' -f 2)
+        
+	if [[ -n ${opengl_profile} ]] ; then
+		ret="${opengl_profile}"
+	elif [[ -n ${ldpath} ]] ; then
+		ret="${ldpath%%:*}"
+		ret="${ret##*opengl/}"
+		ret="${ret%/lib*}"
+	fi
+
+	echo ${ret}
+}
+
+get_implementations() {
+	local ret dir
+	for x in $(list_libdirs) ; do
+		for dir in "${PREFIX}/${x}"/opengl/* ; do
+			[[ -d ${dir} && $(basename "${dir}") != "global" ]] || continue
+			has $(basename "${dir}") ${ret} && continue
+			ret=${ret:+${ret} }$(basename "${dir}")
+		done
+	done
+
+	echo ${ret}
+}
+
+setup_lib_symlinks() {
+	local profile_libdir=${1}
+	local libdir=${2}
+	local file
+	local rootfile
+
+	mkdir -p "${libdir}" || echo "Failed to create ${libdir}"
+
+	pushd "${libdir}" &> /dev/null
+		# First remove old symlinks
+		for file in libGL{,core}.{a,so,la} ; do
+			rm -f "${file}" || echo -q "Failed to delete ${file}"
+		done
+
+		# Note that we don't do .so*, just .so on purpose.  The
+		# loader knows to look in the profile dir, and the
+		# linked just needs the .so
+		for file in ${profile_libdir}/libGL{,core}.{so,a,la}; do
+			rootfile="${file}"
+			[[ -f ${file} ]] || continue
+			if [[ -f $(basename "${file}") ]] ; then
+				rm -f "$(basename "${file}")" || echo -q "Failed to delete ${libdir}/$(basename "${file}")"
+			fi
+
+			# Fix libtool archives (#48297)
+			if [[ ${file%.la} != ${file} ]] ; then
+				sed "s:${profile_libdir}:${libdir}:g" "${file}" > "$(basename "${file}")" || echo "Failed to create ${libdir}/$(basename "${file}")"
+			else
+				ln -s "${rootfile}" || echo "Failed to create ${libdir}/$(basename "${file}")"
+			fi
+		done
+	popd &> /dev/null
+}
+
+set_new_implementation() {
+	local gl_implem=${1}
+	local avail_implems=$(get_implementations)
+
+	# Set a sane umask... bug #83115
+	umask 022
+
+	if ! has ${gl_implem} ${avail_implems}; then
+		echo "Invalid profile selected."
+		exit 1
+	fi
+
+	echo -n "Switching to ${gl_implem} OpenGL interface..."
+
+		local libdir
+		for libdir in $(list_libdirs); do
+			[[ ${ROOT} != / ]] && libdir=${libdir//${ROOT}}
+
+			# First make sure we have an opengl directory and this is a real lib dir, not a symlink
+			[[ -d ${PREFIX}/${libdir}/opengl && ! -h ${PREFIX}/${libdir} ]] || continue
+
+			# Fallback on xorg-x11 if we don't have this implementation for this libdir.
+			local gl_local
+			if [[ ! -d ${PREFIX}/${libdir}/opengl/"${gl_implem}" ]] ; then
+				gl_local="xorg-x11"
+			else
+				gl_local="${gl_implem}"
+			fi
+
+			setup_lib_symlinks "${PREFIX}/${libdir}/opengl/${gl_local}/lib" "${DST_PREFIX}/${libdir}"
+		
+			if [[ -e ${PREFIX}/${libdir}/opengl/${gl_local}/lib/tls ]] ; then
+				setup_lib_symlinks "${PREFIX}/${libdir}/opengl/${gl_local}/lib/tls" "${DST_PREFIX}/${libdir}/tls"
+			fi
+
+			local moduledir
+			if [[ -e ${DST_PREFIX}/${libdir}/xorg/modules ]] ; then
+				moduledir="xorg/modules"
+			else
+				moduledir="modules"
+			fi
+
+			if [[ -e ${PREFIX}/${libdir}/opengl/${gl_local}/extensions ]] ; then
+				mkdir -p "${DST_PREFIX}/${libdir}/${moduledir}/extensions" || echo "Failed to create ${DST_PREFIX}/${libdir}/${moduledir}/extensions"
+				pushd "${DST_PREFIX}/${libdir}/${moduledir}/extensions" &> /dev/null
+					# First remove old symlinks
+					for file in lib{wfb,glx,dri,dri2}.{a,so,la}; do
+						rm -f "${file}" || echo "Failed to delete ${DST_PREFIX}/${libdir}/${moduledir}/extensions/${file}"
+					done
+
+					for file in ${PREFIX}/${libdir}/opengl/${gl_local}/extensions/*.{so,a,la}; do
+						[[ -f ${file} ]] || continue
+						if [[ -f $(basename "${file}") ]] ; then
+							rm -f "$(basename "${file}")" || echo "Failed to delete ${DST_PREFIX}/${libdir}/${moduledir}/extensions/$(basename "${file}")"
+						fi
+
+						# Fix libtool archives (#48297)
+						if [[ ${file%.la} != ${file} ]] ; then
+							sed "s:${PREFIX}/[^/]*/opengl/[^/]*/lib:${DST_PREFIX}/${libdir}:g" "${file}" > "$(basename "${file}")" || echo "Failed to create ${DST_PREFIX}/${libdir}/${moduledir}/extensions/$(basename "${file}")"
+						else
+							ln -s "${file}" || echo "Failed to create ${libdir}/$(basename "${file}")"
+						fi
+					done
+				popd &> /dev/null
+			fi
+
+			# Setup the includes
+			mkdir -p "${DST_PREFIX}/include/GL" || echo "Failed to create ${DST_PREFIX}/include/GL"
+			pushd "${DST_PREFIX}/include/GL" &> /dev/null
+				for file in gl.h glx.h glxtokens.h glext.h glxext.h glxmd.h glxproto.h; do
+					# IMPORTANT
+					# It is preferable currently to use the standard glext.h file
+					# however if an OpenGL provider must use a self produced glext.h
+					# then it should be installed to ${gl_implem}/include and the user
+					# can add the --impl-headers option to select it.
+
+					if [[ "${USE_PROFILE_HEADERS}" == "yes" ]] ; then
+						# Check the profile first.
+						if [[ -e ${PREFIX}/${libdir}/opengl/${gl_implem}/include/${file} ]] ; then
+							if [[ -f ${file} || ( -L ${file} && ! -e ${file} ) ]] ; then
+								rm -f "${file}" || echo "Failed to delete ${DST_PREFIX}/include/GL/$(basename "${file}")"
+							fi
+
+							ln -s ${PREFIX}/${libdir}/opengl/${gl_implem}/include/${file} || echo "Failed to create ${DST_PREFIX}/include/GL/$(basename "${file}")"
+							continue
+						fi
+					fi
+
+					if [[ -e ${PREFIX}/${libdir}/opengl/global/include/${file} ]] ; then
+						if [[ -f ${file} || ( -L ${file} && ! -e ${file} ) ]] ; then
+							rm -f "${file}" || echo "Failed to delete ${DST_PREFIX}/include/GL/$(basename "${file}")"
+						fi
+
+						ln -s ${PREFIX}/${libdir}/opengl/global/include/${file} || echo "Failed to create ${DST_PREFIX}/include/GL/$(basename "${file}")"
+					elif [[ -e ${PREFIX}/${libdir}/opengl/${gl_implem}/include/${file} ]] ; then
+						if [[ -f ${file} || ( -L ${file} && ! -e ${file} ) ]] ; then
+							rm -f "${file}" || echo "Failed to delete ${DST_PREFIX}/include/GL/$(basename "${file}")"
+						fi
+
+						ln -s ${PREFIX}/${libdir}/opengl/${gl_implem}/include/${file} || echo "Failed to create ${DST_PREFIX}/include/GL/$(basename "${file}")"
+					elif [[ -e ${PREFIX}/${libdir}/opengl/xorg-x11/include/${file} ]] ; then
+						if [[ -f ${file} || ( -L ${file} && ! -e ${file} ) ]] ; then
+							rm -f "${file}" || echo "Failed to delete ${DST_PREFIX}/include/GL/$(basename "${file}")"
+						fi
+
+						ln -s ${PREFIX}/${libdir}/opengl/xorg-x11/include/${file} || echo "Failed to create ${DST_PREFIX}/include/GL/$(basename "${file}")"
+					fi
+				done
+			popd &> /dev/null
+
+			# Setup the $LDPATH
+			ldpath="${ldpath:+${ldpath}:}${PREFIX}/${libdir}/opengl/${gl_local}/lib"
+
+		done
+
+		sed -i '/LDPATH=.*/d' ${ENV_FILE}
+		echo "LDPATH=\"${ldpath}\"" >> ${ENV_FILE}
+		oldldpath=$(cat /etc/profile.env|grep LDPATH | cut -d"'" -f2)
+
+		sed -i '/export LDPATH=.*/d' /etc/profile.env
+		sed -i '/setenv LDPATH=.*/d' /etc/csh.env
+		sed -i '/export LD_LIBRARY_PATH=.*/d' /etc/profile.env
+		sed -i '/setenv LD_LIBRARY_PATH=.*/d' /etc/csh.env
+		sed -i "s/OPENGL_PROFILE=.*/OPENGL_PROFILE='${gl_implem}'/"  /etc/profile.env
+		sed -i "s/OPENGL_PROFILE=.*/OPENGL_PROFILE='${gl_implem}'/"  /etc/csh.env
+		sed -i '/LD_LIBRARY_PATH=.*/d' ${ENV_FILE}
+		sed -i "s/OPENGL_PROFILE=.*/OPENGL_PROFILE=\"${gl_implem}\"/"  ${ENV_FILE}
+
+		echo "export LDPATH='"${ldpath}":"${oldldpath}"'" >> /etc/profile.env
+		echo "setenv LDPATH='"${ldpath}":"${oldldpath}"'" >> /etc/csh.env
+		echo "export LD_LIBRARY_PATH='"${ldpath}"'" >> /etc/profile.env
+		echo "setenv LD_LIBRARY_PATH='"${ldpath}"'" >> /etc/csh.env
+		echo 'LD_LIBRARY_PATH="'${ldpath}'"' >> ${ENV_FILE}
+
+
+		source /etc/profile &> /dev/null
+	echo " done"
+}
+
+do_set() {
+	local action="error"
+	local current=$(get_current_implementation)
+	local available=$(get_implementations)
+	local new
+
+	while [[ ${#@} -gt 0 ]] ; do
+		local opt=${1}
+		shift
+		case ${opt} in
+			*)
+				action="set-implementation"
+				if has ${opt} ${available}; then
+					new="${opt}"
+				else
+					echo "Unrecognized option: ${opt}"
+				fi
+			;;
+		esac
+	done
+
+	case ${action} in
+		set-implementation)
+			if [[ -n ${new} ]] ; then
+				set_new_implementation ${new}
+                                rc=$?
+				sed -i "s/opengl\/xorg-x11\//opengl\/${new}\//" /etc/ld.so.conf
+				sed -i "s/opengl\/ati\//opengl\/${new}\//" /etc/ld.so.conf
+				sed -i "s/opengl\/nvidia\//opengl\/${new}\//" /etc/ld.so.conf
+				ldconfig -X &> /dev/null
+				return ${rc}
+			else
+				echo "Please specify an implementation to set"
+			fi
+		;;
+		*)
+			echo "Invalid usage of set action."
+		;;
+	esac
+
+}
+
+do_show() {
+	local current=$(get_current_implementation)
+	echo ${current}
+}
+
+is_live=$(cat /proc/cmdline | grep cdroot)
+
+if [ -n "$is_live" ]; then
+	if [ "$1" == "show" ]; then
+		do_show
+	else
+		do_set $@
+	fi
+else
+	if [ "$1" == "show" ]; then
+		eselect opengl show
+	else
+		eselect opengl set $@
+	fi
+fi
diff --git a/app-misc/rogentoslive-tools/files/1.0/rogentos-functions.sh b/app-misc/rogentoslive-tools/files/1.0/rogentos-functions.sh
new file mode 100755
index 00000000..eb4bf4d6
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/rogentos-functions.sh
@@ -0,0 +1,247 @@
+#!/bin/bash
+
+GDM_FILE="/usr/share/gdm/defaults.conf"
+CUSTOM_GDM_FILE="/etc/gdm/custom.conf"
+KDM_FILE="/usr/share/config/kdm/kdmrc"
+LXDM_FILE="/etc/lxdm/lxdm.conf"
+OEM_FILE="/etc/oemlive.sh"
+OEM_FILE_NEW="/etc/oem/liveboot.sh"
+LIVE_USER_GROUPS="audio bumblebee cdrom cdrw clamav console entropy games \
+kvm lp lpadmin messagebus plugdev polkituser portage pulse pulse-access pulse-rt \
+scanner usb users uucp vboxguest vboxusers video wheel"
+LIVE_USER=${SABAYON_USER:-rogentosuser}
+
+sabayon_setup_autologin() {
+	# GDM - GNOME
+	if [ -f "${GDM_FILE}" ]; then
+		sed -i "s/^AutomaticLoginEnable=.*/AutomaticLoginEnable=true/" ${GDM_FILE}
+		sed -i "s/^AutomaticLogin=.*/AutomaticLogin=${LIVE_USER}/" ${GDM_FILE}
+
+		sed -i "s/^TimedLoginEnable=.*/TimedLoginEnable=true/" ${GDM_FILE}
+		sed -i "s/^TimedLogin=.*/TimedLogin=${LIVE_USER}/" ${GDM_FILE}
+		sed -i "s/^TimedLoginDelay=.*/TimedLoginDelay=0/" ${GDM_FILE}
+
+	elif [ -f "${CUSTOM_GDM_FILE}" ]; then
+		# FIXME: if this is called multiple times, it generates duplicated entries
+		sed -i "s:\[daemon\]:\[daemon\]\nAutomaticLoginEnable=true\nAutomaticLogin=${LIVE_USER}\nTimedLoginEnable=true\nTimedLogin=${LIVE_USER}\nTimedLoginDelay=0:" \
+			"${CUSTOM_GDM_FILE}"
+		# change other entries there
+		sed -i "s/^TimedLogin=.*/TimedLogin=${LIVE_USER}/" "${CUSTOM_GDM_FILE}"
+		sed -i "s/^AutomaticLogin=.*/AutomaticLogin=${LIVE_USER}/" "${CUSTOM_GDM_FILE}"
+	fi
+
+	# KDM - KDE
+	if [ -f "$KDM_FILE" ]; then
+		sed -i "s/AutoLoginEnable=.*/AutoLoginEnable=true/" $KDM_FILE
+		sed -i "s/AutoLoginUser=.*/AutoLoginUser=${LIVE_USER}/" $KDM_FILE
+		sed -i "s/AutoLoginDelay=.*/AutoLoginDelay=0/" $KDM_FILE
+		sed -i "s/AutoLoginAgain=.*/AutoLoginAgain=true/" $KDM_FILE
+
+		sed -i "s/AllowRootLogin=.*/AllowRootLogin=true/" $KDM_FILE
+		sed -i "s/AllowNullPasswd=.*/AllowNullPasswd=true/" $KDM_FILE
+		sed -i "s/AllowShutdown=.*/AllowShutdown=All/" $KDM_FILE
+
+		sed -i "/^#.*AutoLoginEnable=/ s/^#//" $KDM_FILE
+		sed -i "/^#.*AutoLoginUser=/ s/^#//" $KDM_FILE
+		sed -i "/^#.*AutoLoginDelay=/ s/^#//" $KDM_FILE
+		sed -i "/^#.*AutoLoginAgain=/ s/^#//" $KDM_FILE
+
+		sed -i "/^#AllowRootLogin=/ s/^#//" $KDM_FILE
+		sed -i "/^#AllowNullPasswd=/ s/^#//" $KDM_FILE
+		sed -i "/^#AllowShutdown=/ s/^#//" $KDM_FILE
+	fi
+
+	# LXDM
+	if [ -f "$LXDM_FILE" ]; then
+		sed -i "s/autologin=.*/autologin=${LIVE_USER}/" $LXDM_FILE
+		sed -i "/^#.*autologin=/ s/^#//" $LXDM_FILE
+	fi
+
+	# Setup correct login session
+	sabayon_is_normal_boot && sabayon_fixup_gnome_autologin_session
+}
+
+sabayon_disable_autologin() {
+	# GDM - GNOME
+	if [ -f "${GDM_FILE}" ]; then
+		sed -i "s/^AutomaticLoginEnable=.*/AutomaticLoginEnable=false/" ${GDM_FILE}
+	fi
+
+	# KDM - KDE
+	KDM_FILE="/usr/share/config/kdm/kdmrc"
+	if [ -f "$KDM_FILE" ]; then
+		sed -i "s/AutoLoginEnable=.*/AutoLoginEnable=false/" $KDM_FILE
+	fi
+}
+
+sabayon_setup_live_user() {
+	local live_user="${1}"
+	local live_uid="${2}"
+	if [ -z "${live_user}" ]; then
+		live_user="${LIVE_USER}"
+	fi
+	if [ -n "${live_uid}" ]; then
+		live_uid="-u ${live_uid}"
+	fi
+	id ${live_user} &> /dev/null
+	if [ "${?}" != "0" ]; then
+		local live_groups=""
+		local avail_groups=$(cat /etc/group | cut -d":" -f 1 | xargs echo)
+		for a_group in ${avail_groups}; do
+			for p_group in ${LIVE_USER_GROUPS}; do
+				if [ "${p_group}" = "${a_group}" ]; then
+					if [ -z "${live_groups}" ]; then
+						live_groups="${p_group}"
+					else
+						live_groups="${live_groups},${p_group}"
+					fi
+				fi
+			done
+		done
+		# then setup live user, that is missing
+		useradd -d "/home/${live_user}" -g root -G ${live_groups} -c "rogentosuser" \
+			-m -N -p "" -s /bin/bash ${live_uid} "${live_user}"
+		return 0
+	fi
+	return 1
+}
+
+sabayon_setup_motd() {
+	echo -e "\n\tWelcome to `cat /etc/rogentos-edition`\n\t`uname -p`\n\t`uname -o` `uname -r`\n" > /etc/motd
+}
+
+sabayon_setup_vt_autologin() {
+	source /sbin/livecd-functions.sh
+	export CDBOOT=1
+	livecd_fix_inittab
+}
+
+sabayon_setup_oem_livecd() {
+	if [ -x "${OEM_LIVE_NEW}" ]; then
+		${OEM_FILE_NEW} || return 1
+	elif [ -x "${OEM_LIVE}" ]; then
+		${OEM_FILE} || return 1
+	fi
+	return 0
+}
+
+sabayon_is_live() {
+	local cmdl=$(cat /proc/cmdline | grep cdroot)
+	if [ -n "${cmdl}" ]; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+sabayon_setup_gui_installer() {
+	# Configure Fluxbox
+	local dmrc_file="/home/${LIVE_USER}/.dmrc"
+	local flux_dir="/home/${LIVE_USER}/.fluxbox"
+	local flux_startup_file="${flux_dir}/startup"
+	chown ${LIVE_USER} "${dmrc_file}"
+	chown ${LIVE_USER} "/home/${LIVE_USER}/.fluxbox
+	if [ ! -d "${flux_dir}" ]; then
+		mkdir "${flux_dir}" && chown "${LIVE_USER}" "${flux_dir}"
+	fi
+	echo "[Desktop]" > "${dmrc_file}"
+	echo "Session=fluxbox" >> "${dmrc_file}"
+	chown rogentosuser "${dmrc_file}"
+	sed -i "/installer --fullscreen/ s/^# //" "${flux_startup_file}"
+	if [ -x "/usr/libexec/gdm-set-default-session" ]; then
+		# oh my fucking glorious god, this
+		# is AccountsService bullshit
+		# cross fingers
+		/usr/libexec/gdm-set-default-session fluxbox
+	fi
+	if [ -x "/usr/libexec/gdm-set-session" ]; then
+		# GDM 3.6 support
+		/usr/libexec/gdm-set-session sabayonuser fluxbox
+	fi
+        chown ${LIVE_USER} "${dmrc_file}"
+        chown ${LIVE_USER} "/home/${LIVE_USER}/.fluxbox
+}
+
+# This function reads /etc/skel/.dmrc and properly
+# set the Session= value inside AccountsService.
+# Blame the idiots who broke de-facto standards
+# and created this fugly thing called AccountsService
+sabayon_fixup_gnome_autologin_session() {
+	local cur_session=
+
+	if [ -f "/etc/skel/.dmrc" ]; then
+		cur_session=$(cat /etc/skel/.dmrc | grep ^Session | cut -d"=" -f 2)
+	fi
+	if [ -z "${cur_session}" ]; then
+		return 0
+	fi
+
+	local sess_file="/usr/share/xsessions/${cur_session}.desktop"
+	if [ ! -f "${sess_file}" ]; then
+		return 0
+	fi
+
+	if [ -x "/usr/libexec/gdm-set-default-session" ]; then
+		# this edits /etc/gdm/custom.conf adding [daemon]\nDefaultSession=${cur_session}
+		/usr/libexec/gdm-set-default-session "${cur_session}"
+	fi
+
+	if [ -x "/usr/libexec/gdm-set-session" ]; then
+		# GDM 3.6 support
+		local users_in_users=$(cat /etc/group | grep "^users" | awk -F':' '{ print $4 }' | sed "s:,: :g")
+		for usr in ${users_in_users}; do
+			/usr/libexec/gdm-set-session "${usr}" "${cur_session}"
+		done
+	fi
+}
+
+sabayon_setup_text_installer() {
+	# switch to verbose mode
+	splash_manager -c set -t default -m v &> /dev/null
+	reset
+	chvt 1
+	clear
+	echo "Welcome to Rogentos Linux Text installation." >> /etc/motd
+	echo "root password: root" >> /etc/motd
+	echo "to run the installation type: installer <and PRESS ENTER>" >> /etc/motd
+}
+
+sabayon_is_text_install() {
+	local _is_install=$(cat /proc/cmdline | grep installer-text)
+	if [ -n "${_is_install}" ]; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+sabayon_is_gui_install() {
+	local _is_install=$(cat /proc/cmdline | grep installer-gui)
+	if [ -n "${_is_install}" ]; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+sabayon_is_live_install() {
+	( sabayon_is_text_install || sabayon_is_gui_install ) && return 0
+	return 1
+}
+
+sabayon_is_mce() {
+	local _is_mce=$(cat /proc/cmdline | grep sabayonmce)
+	if [ -n "${_is_mce}" ]; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+sabayon_is_normal_boot() {
+	if ! sabayon_is_mce && ! sabayon_is_live_install; then
+		return 0
+	else
+		return 1
+	fi
+}
diff --git a/app-misc/rogentoslive-tools/files/1.0/rogentos-welcome-loader b/app-misc/rogentoslive-tools/files/1.0/rogentos-welcome-loader
new file mode 100755
index 00000000..0bb12f2b
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/rogentos-welcome-loader
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+SABAYON_LOADER="/usr/bin/xdg-open"
+SABAYON_URL=${SABAYON_URL:-http://www.sabayon.org?install_welcome=1}
+
+# load Sabayon URL
+[[ -x "${SABAYON_LOADER}" ]] && ${SABAYON_LOADER} ${SABAYON_URL} &
+
+# remove myself from autostart
+rm ~/.config/autostart/sabayon-welcome-loader.desktop -f
diff --git a/app-misc/rogentoslive-tools/files/1.0/rogentos-welcome-loader.desktop b/app-misc/rogentoslive-tools/files/1.0/rogentos-welcome-loader.desktop
new file mode 100644
index 00000000..e5ea4b3d
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/rogentos-welcome-loader.desktop
@@ -0,0 +1,7 @@
+[Desktop Entry]
+Type=Application
+Name=sabayon-loader
+Exec=sabayon-welcome-loader
+Icon=system-run
+Comment=Sabayon Linux post-install Welcome Screen
+Terminal=false
diff --git a/app-misc/rogentoslive-tools/files/1.0/rogentoslive b/app-misc/rogentoslive-tools/files/1.0/rogentoslive
new file mode 100755
index 00000000..4a65b73e
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/rogentoslive
@@ -0,0 +1,218 @@
+#!/sbin/runscript
+# Copyright 2004-2009 Fabio Erculiani
+# Distributed under the terms of the GNU General Public License v2 
+
+. /sbin/rogentos-functions.sh
+
+depend() {
+	after x-setup
+	before hald
+	before xdm
+}
+
+prepare_fluxbox_locked_autologin() {
+
+	# change default wm to fluxbox
+	echo "[Desktop]" > /home/${LIVE_USER}/.dmrc
+	echo "Session=fluxbox" >> /home/${LIVE_USER}/.dmrc
+	chown ${LIVE_USER} /home/${LIVE_USER}/.dmrc
+	# Change passwords for security
+	echo root:\`pwgen -s 16\` | chpasswd  > /dev/null 2>&1
+	echo ${LIVE_USER}:\`pwgen -s 16\` | chpasswd  > /dev/null 2>&1
+
+}
+
+my_setup_desktop() {
+
+	# create LIVE_USER if it does not exist
+	sabayon_setup_live_user "${LIVE_USER}" "1000"
+	if [ "${?}" = "1" ]; then
+		# if user is already available, then setup skel
+		# Copy ${LIVE_USER} directory
+		rm -rf /home/${LIVE_USER}
+		cp /etc/skel /home/${LIVE_USER} -Rp
+		chown ${LIVE_USER}:users /home/${LIVE_USER} -R
+	fi
+
+	liveinst_desktop="/usr/share/applications/liveinst.desktop"
+	liveinst_desktop_name="$(basename ${liveinst_desktop})"
+	if [ -f "${liveinst_desktop}" ]; then
+		[[ -d "/home/${LIVE_USER}/Desktop" ]] || mkdir -p /home/${LIVE_USER}/Desktop 
+		cp "${liveinst_desktop}" /home/${LIVE_USER}/Desktop
+		chown ${LIVE_USER}:users /home/${LIVE_USER}/Desktop -R
+		chmod +x /home/${LIVE_USER}/Desktop/${liveinst_desktop_name}
+		rm -f /etc/skel/Desktop/Anaconda*.desktop
+		rm -f /home/${LIVE_USER}/Desktop/Anaconda*.desktop
+	fi
+
+	# Disable memory eating services
+	rm -f /etc/xdg/autostart/hplip-systray.desktop
+	rm -f /etc/xdg/autostart/beagle-search-autostart.desktop
+	rm -f /etc/xdg/autostart/tracker*.desktop
+	rm -f /etc/xdg/autostart/magneto.desktop
+	rm -f /etc/xdg/autostart/beagled-autostart.desktop
+	rm -f /usr/share/autostart/magneto.desktop
+	rm -f /usr/share/autostart/nepomukserver.desktop
+
+        # Remove broken entries in /etc/mtab
+        sed -i '/.*newroot.*/d' /etc/mtab
+
+	# Create /media for removable devices
+	if [ ! -d /media ]; then
+		mkdir /media
+		chmod 755 /media
+	fi
+
+	# Add sudo to gparted exec=
+	gparted_file="/home/${LIVE_USER}/Desktop/gparted.desktop"
+	if [ -f "${gparted_file}" ]; then
+		sed -i 's/Exec=/Exec=sudo /' "${gparted_file}"
+	fi
+
+	# create /overlay, this way df -h won't bitch
+	[[ -d "/overlay" ]] || mkdir /overlay
+
+}
+
+my_setup_password() {
+
+	cmdline_autoscramble_exist=$(cat /proc/cmdline | grep autoscramble)
+	if [ -n "$cmdline_autoscramble_exist" ]; then
+		echo
+		echo -e "\E[33;36m * \E[0m\E[01;36m Autoscrambling root passwords for   S E C U R I T Y"
+		echo root:\`pwgen -s 16\` | chpasswd  > /dev/null 2>&1
+		echo ${LIVE_USER}:\`pwgen -s 16\` | chpasswd  > /dev/null 2>&1
+		echo
+	fi
+
+}
+
+my_setup_keymap() {
+
+	# Check if KEYMAP is forced by cmdline
+	cmdline_keymap_exist=$(cat /proc/cmdline | grep -i "KEYMAP=")
+	cmdline_keymap_isolinux_exist=$(cat /proc/cmdline | grep -i "console-setup/layoutcode=")
+
+	if [ -n "$cmdline_keymap_isolinux_exist" ]; then
+		cmdline_keymap_exist="console-setup"
+	fi
+
+        if [ -n "$cmdline_keymap_exist" ];then
+
+		if [ "$cmdline_keymap_exist" == "console-setup" ]; then
+			# detect keymap
+			for word in `cat /proc/cmdline` ; do
+				case $word in
+					console-setup/layoutcode=*)
+					keymap_toset=$(echo $word | cut -d "=" -f 2)
+					;;
+					console-setup/modelcode=*)
+					keymap_toset_model="-$(echo $word | cut -d "=" -f 2)"
+					;;
+				esac
+			done
+		else
+
+			# detect keymap
+			for word in `cat /proc/cmdline` ; do
+				case $word in
+					KEYMAP=*)
+					keymap_toset=$(echo $word | cut -d "=" -f 2)
+					;;
+					keymap=*)
+					keymap_toset=$(echo $word | cut -d "=" -f 2)
+					;;
+				esac
+			done
+
+		fi
+
+		if [ -n "$keymap_toset" ]; then
+			aggregated_keymap="${keymap_toset}${keymap_toset_model}"
+			/sbin/keyboard-setup-2 ${aggregated_keymap} all &> /dev/null
+			if [ "${?}" = "0" ]; then
+				/etc/init.d/keymaps restart --nodeps
+			fi
+		fi
+	
+	fi
+
+}
+
+my_wait_opengl_config() {
+
+	echo -en "\E[33;36m * \E[0m \E[01;32m Waiting for Graphical Configurator to finish... \E[0m"
+	while [ -e "/etc/x-setup-configuration-running" ]
+           do
+	      # waiting...
+	      sleep 1
+	   done
+	echo -e "Done"
+
+}
+
+my_setup_locale() {
+
+        cmdline_lang_exist=$(cat /proc/cmdline | grep -i "lang=")
+        cmdline_locale_exist=$(cat /proc/cmdline | grep -i "locale=")
+
+	if [ -n "$cmdline_locale_exist" ]; then
+		cmdline_lang_exist="locale-setup"
+	fi
+
+        if [ -n "$cmdline_lang_exist" ];then
+
+		if [ "$cmdline_lang_exist" == "locale-setup" ]; then
+			# detect keymap
+			for word in `cat /proc/cmdline` ; do
+				case $word in
+					locale=*)
+					lang_toset=$(echo $word | cut -d "=" -f 2)
+					;;
+				esac
+			done
+		else
+			for word in `cat /proc/cmdline` ; do
+				case $word in
+					LANG=*)
+					lang_toset=$(echo $word | cut -d "=" -f 2)
+					;;
+					lang=*)
+					lang_toset=$(echo $word | cut -d "=" -f 2)
+					;;
+				esac
+			done
+		fi
+		
+		# Setup Language
+		if [ -n "$lang_toset" ]; then
+			/sbin/language-setup $lang_toset &> /dev/null
+		fi
+
+        fi
+
+}
+
+start() {
+
+	# Perform configuration only in live mode
+	if ! sabayon_is_live; then
+		einfo "Skipping live mode configuration"
+		return 0
+	fi
+
+	my_setup_desktop
+	my_setup_password
+	my_setup_keymap
+	my_wait_opengl_config
+	# MOVED HERE TO AVOID RACE CONDITIONS ON WRITING /etc/profile.env variables
+	# Check if LANG is forced by cmdline
+	my_setup_locale
+	# setup autologin for all the supported Login managers
+	sabayon_setup_autologin
+	# override autostart stuff if required:
+	sabayon_setup_motd
+	sabayon_setup_vt_autologin
+	sabayon_setup_oem_livecd
+
+}
diff --git a/app-misc/rogentoslive-tools/files/1.0/sabayon-live-check b/app-misc/rogentoslive-tools/files/1.0/sabayon-live-check
new file mode 100644
index 00000000..4dc2e739
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/sabayon-live-check
@@ -0,0 +1,26 @@
+#!/bin/sh
+#
+# sabayon_livechk.sh
+#
+# Checks the integrity of a LiveCD/DVD by passing the
+# contents of the image through a md5sum (to be compared
+# with an documented value elsewhere).
+#
+
+if ( ! isoinfo -d -i /dev/cdrom >>/dev/null 2>/dev/null ); then
+       echo "CDROM/DVD image not found!"
+       exit 1
+fi
+
+echo -e "Checking image integrity, please allow several minutes...\n"
+echo "You can check for errors by running 'tail /var/log/messages'"
+echo "in another console window.  If you encounter multiple device"
+echo "errors with you cdrom, this probably indicates the test is failing."
+echo "You may type 'Ctrl-c' to abort the check."
+
+BLOCK_SIZE=`isoinfo -d -i /dev/cdrom | grep "Logical block size is" | cut -d: -f2 | sed 's/^[ ]//g'`
+VOL_SIZE=`isoinfo -d -i /dev/cdrom | grep "Volume size is" | cut -d: -f2 | sed 's/^[ ]//g'`
+dd if=/dev/cdrom bs=$BLOCK_SIZE count=$VOL_SIZE conv=notrunc,noerror | md5sum
+
+echo "Compare the above value with the value supplied in"
+echo "the release notes for this version at:"
diff --git a/app-misc/rogentoslive-tools/files/1.0/sabutil b/app-misc/rogentoslive-tools/files/1.0/sabutil
new file mode 100755
index 00000000..680a6d1e
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/sabutil
@@ -0,0 +1,667 @@
+#!/bin/bash
+
+# Initial version by wolfden.
+# Later changes by Enlik <poczta-sn at gazeta.pl>.
+
+# last change: 9.03.2012
+# most important changes to last version:
+# - abort if non root where needs root permissions
+# - fix fdisk -l pasting
+# - support for xorg.conf.d
+# - reorder options and add rcupdate_pastebin
+
+USER=$(whoami)
+HOMEDIR=${HOME:-/tmp}
+
+function menu
+{
+    local selection=""
+    until  [[ "$selection" = "0" ]] ; do
+        echo "Current Operating System:"
+	cat /etc/sabayon-release
+	echo ""
+        echo "Current Edition:"
+	cat /etc/rogentos-edition
+        echo
+        echo "Pick a choice from menu below:"
+
+        echo ""
+        echo "1 - Backup & edit xorg.conf and xorg.conf.d"
+        echo "2 - Restore xorg.conf and xorg.conf.d from backup"
+        echo "3 - Regenerate Sabayon xorg.conf"
+        echo "4 - Backup & edit grub.cfg"
+        echo "5 - Restore grub.cfg from backup"
+        echo "----------------------------------------"
+        echo "View and AutoPaste:"
+        echo " "
+        echo "01 - Pastebin Xorg configuration files"
+        echo "02 - Pastebin Xorg.0.log"
+        echo "03 - Pastebin ~/.xsession-errors"
+        echo "04 - Pastebin grub.cfg (bootmanager settings)"
+        echo "05 - Pastebin /var/log/dmesg"
+        echo "06 - Pastebin system and hardware info"
+        echo "07 - Pastebin fdisk -l (list the partition tables)"
+        echo "08 - Pastebin rc-update show (show enabled services and the runlevels)"
+        echo "09 - Pastebin rc.log"
+        echo "10 - Pastebin /var/log/messages"
+        echo "11 - Pastebin kdm.log"
+        echo ""
+        echo "0 - Exit"
+        echo ""
+        echo -n "Enter selection: "
+        read selection
+        echo ""
+
+        case $selection in
+            1 ) xorg_backup ; press_enter ; xorg_edit; press_enter ;;
+            2 ) xorg_restore ; press_enter ;;
+            3 ) xorg_regen ; press_enter ;;
+            4 ) grub_backup ; press_enter ; nano -w /boot/grub/grub.cfg; press_enter ;;
+            5 ) grub_restore ; press_enter ;;
+            01 ) xorg_pastebin ; press_enter ;;
+            02 ) xorg0log_pastebin ; press_enter ;;
+            03 ) xsessionerrors_pastebin ; press_enter ;;
+            04 ) grub_pastebin ; press_enter ;;
+            05 ) dmesg_pastebin ; press_enter ;;
+            06 ) system_pastebin ; press_enter ;;
+            07 ) fdisk_pastebin ; press_enter ;;
+            08 ) rcupdate_pastebin ; press_enter ;;
+            09 ) rclog_pastebin ; press_enter ;;
+            10 ) messages_pastebin ; press_enter ;;
+            11 ) kdm_pastebin ; press_enter ;;
+
+            0 ) ;;
+            * ) echo "Please be sensible - choose a number that exists in the menu"; press_enter
+        esac
+    done
+
+}
+
+function press_enter
+{
+    echo ""
+    echo -n "Press Enter to continue"
+    read
+    clear
+}
+
+function is_root
+{
+    if [[ $USER != "root" ]]; then
+        echo "You need to be root to do this." >&2
+        return 1
+    fi
+    return 0
+}
+
+function xorg_regen
+{
+    is_root || return
+
+    if [[ ! -f "/etc/X11/xorg.conf.rogentos" ]]; then
+        cat > /etc/X11/xorg.conf.rogentos <<EOF
+Section "Module"
+    SubSection  "extmod"
+       Option    "omit xfree86-dga"
+    EndSubSection
+    Load        "i2c"
+    Load        "ddc"
+    Load        "synaptics"
+    Load        "vbe"
+#   Load        "dri"
+EndSection
+
+
+Section "ServerFlags"
+     Option     "AllowMouseOpenFail" "true"
+EndSection
+
+Section "InputDevice"
+    Identifier          "Synaptics1"
+    Driver              "synaptics"
+    Option              "SendCoreEvents"        "true"
+    Option              "Device"                "/dev/psaux"
+    Option              "Protocol"              "auto-dev"
+    Option              "HorizScrollDelta"      "0"
+    Option              "SHMConfig"             "on"
+    # For ALPS/MacBook TouchPads
+    #Option             "MaxSpeed"              "0.7"
+    #Option             "MinSpeed"              "0.18"
+    #Option             "AccelFactor"           "0.08"
+    #Option             "TopEdge"               "120"
+    #Option             "LeftEdge"              "120"
+    #Option             "BottomEdge"            "830"
+    #Option             "RightEdge"             "650"
+    #Option             "FingerLow"             "25"
+    #Option             "FingerHigh"            "30"
+    # MacBook touchpad
+    #Option             "MaxTapTime"            "180"
+    #Option             "MaxTapMove"            "220"
+    #Option             "MaxDoubleTapTime"      "180"
+    #Option             "VertScrollDelta"       "20"
+    #Option             "HorizScrollDelta"      "50"
+    #Option             "TapButton2"            "3"
+    #Option             "TapButton3"            "2"
+    #Option             "VertTwoFingerScroll"   "1"
+
+    # Do you keep moving the mouse while typing? Try this trick.
+    #synclient TouchpadOff=1 disable your synaptics touchpad
+    #synclient TouchpadOff=0 enable your synaptics touchpad
+EndSection
+
+
+# **********************************************************************
+# Monitor section
+# **********************************************************************
+
+# Any number of monitor sections may be present
+
+Section "Monitor"
+    Identifier  "Generic Monitor"
+    VertRefresh 43 - 60
+    HorizSync   28 - 80
+EndSection
+
+# **********************************************************************
+# Graphics device section
+# **********************************************************************
+
+# Any number of graphics device sections may be present
+
+Section "Device"
+    Identifier  "VESA"
+    Driver      "vesa" # do not remove vesa
+    #Option "RenderAccel" "on"
+    #Option "XAANoOffscreenPixmaps"
+    #Option "BusType" "PCI"
+    #Option "ColorTiling" "on"
+    #Option "EnablePageFlip" "on"
+    # UseEvents is causing segmentation faults with
+    # NVIDIA 6xxx, 7xxx and >=275.xx.xx drivers
+    #Option "UseEvents" "True"
+EndSection
+
+
+# **********************************************************************
+# Screen sections.
+# **********************************************************************
+
+Section "Screen"
+
+# The Identifier, Device and Monitor lines must be present
+
+    Identifier  "Screen 1"
+    Device      "VESA"
+    Monitor     "Generic Monitor"
+    #Option "AddARGBGLXVisuals" "true"
+
+# The favoured Depth and/or Bpp may be specified here
+
+    DefaultDepth 24
+
+    SubSection "Display"
+        Depth           8
+        ViewPort        0 0
+        #Modes          "1024x768" "800x600" "640x480"
+    EndSubsection
+
+    SubSection "Display"
+        Depth           16
+        ViewPort        0 0
+        #Modes          "1024x768" "800x600" "640x480"
+    EndSubsection
+
+    SubSection "Display"
+        Depth           24
+        ViewPort        0 0
+        #Modes          "1024x768" "800x600" "640x480"
+    EndSubsection
+
+
+EndSection
+
+
+Section "ServerLayout"
+# The Identifier line must be present
+
+    Identifier  "Main Layout"
+    Screen 0    "Screen 1"
+    InputDevice "Mouse1" "CorePointer"
+    #InputDevice "Synaptics1" "SendCoreEvents"
+
+EndSection
+
+Section "DRI"
+    Mode 0666
+EndSection
+
+Section "Extensions"
+   #Option "Composite" "Enable"
+EndSection
+EOF
+    fi
+
+    mv -f /etc/X11/xorg.conf /etc/X11/xorg.conf.old
+    /usr/sbin/x-setup-configuration
+
+    echo "Note: you may want to look to /etc/X11/xorg.conf.d (if it exists), too."
+}
+
+function xorg_backup
+{
+    is_root || return
+
+    if [[ -f /etc/X11/xorg.conf.BKUP ]]; then
+        echo "/etc/X11/xorg.conf.BKUP already exists, so new backup wasn't made - aborting."
+        echo "Now off we go to edit the file...."
+        return
+    elif [[ -e /etc/X11/xorg.conf.d.BKUP ]]; then
+        echo "/etc/X11/xorg.conf.d.BKUP backup already exists, so new backup wasn't made - aborting."
+        return
+    fi
+
+    # Delete backup file. If there's no xorg.conf, no stale xorg.conf.BKUP will be kept.
+    # So xorg_restore will not made new (unexpected) xorg.conf from xorg.conf.BKUP.
+    rm -f /etc/X11/xorg.conf.BKUP
+    if [[ -f /etc/X11/xorg.conf ]]; then
+	echo "Making backup of xorg.conf as /etc/X11/xorg.conf.BKUP"
+	cp /etc/X11/xorg.conf /etc/X11/xorg.conf.BKUP
+    else
+	echo "There's no /etc/X11/xorg.conf so it couldn't be backed up."
+    fi
+
+    if [[ -e /etc/X11/xorg.conf.d ]]; then
+	echo "Making backup of /etc/X11/xorg.conf.d/*"
+	if [[ ! -d /etc/X11/xorg.conf.d ]]; then
+	    echo "!!!"
+	    echo "/etc/X11/xorg.conf.d is not a directory!"
+	    return
+	fi
+        mkdir -p /etc/X11/xorg.conf.d.BKUP
+        rm -f /etc/X11/xorg.conf.d.BKUP/* # dotfiles and subdirectories (who keeps them there?!) are left untouched
+        cp /etc/X11/xorg.conf.d/* /etc/X11/xorg.conf.d.BKUP/ # and not copied (that's fine)
+        echo "/etc/X11/xorg.conf.d/* files are backed up in /etc/X11/xorg.conf.d.BKUP/"
+    else
+	echo "There's no /etc/X11/xorg.conf.d (directory) so it couldn't be backed up."
+    fi
+
+    echo ""
+    echo "INTEL graphics users please read the url below before proceding"
+    echo ""
+    echo "http://gentoo-wiki.com/HOWTO_Intel_Onboard_Graphics_Notebooks_Native_Resolution"
+}
+
+function xorg_restore
+{
+    is_root || return
+
+    echo "Are you sure? This will replace your /etc/X11/xorg.conf and /etc/X11/xorg.conf.d/*.conf."
+    echo "[Y/n]"
+    local reply
+    read reply
+    if [[ $reply != "" && $reply != "y" && $reply != "Y" ]]; then
+        echo "OK, aborting."
+        return
+    fi
+
+    if [[ -f /etc/X11/xorg.conf.BKUP ]]; then
+        echo "xorg.conf backup (/etc/X11/xorg.conf.BKUP) exists, whew!"
+        cp /etc/X11/xorg.conf.BKUP /etc/X11/xorg.conf
+        echo ""
+        echo "The original xorg.conf has been restored"
+    else
+        echo "UH OH!! The backup /etc/X11/xorg.conf.BKUP hasn't been made."
+        echo "If you think you need the file, don't panic, you can copy it from the Live DVD/CD."
+    fi
+
+    echo ""
+
+    if [[ -d /etc/X11/xorg.conf.d.BKUP ]] \
+	&& (shopt -s nullglob; f=(/etc/X11/xorg.conf.d.BKUP/*.conf); [[ ${#f[*]} -ne 0 ]] )
+    then
+        echo "The backup /etc/X11/xorg.conf.d.BKUP (directory) exists and contails .conf files."
+        mkdir -p /etc/X11/xorg.conf.d
+	# similar notes as for xorg_backup, but files like .disabled are not removed
+        rm -f /etc/X11/xorg.conf.d/*.conf
+        cp /etc/X11/xorg.conf.d.BKUP/* /etc/X11/xorg.conf.d/
+        echo "Your settings are now restored to /etc/X11/xorg.conf.d/."
+    fi
+}
+
+function grub_backup
+{
+    is_root || return
+
+    echo "Note: to modify GRUB configuration, you should edit /etc/default/grub"
+    echo " or a file in /etc/grub.d and then run grub-mkconfig -o /boot/grub/grub.cfg"
+    echo " (/boot/grub/grub.cfg shouldn't be edited by hand)."
+    echo ""
+
+    if [[ -f /boot/grub/grub.cfg.BKUP ]]; then
+        echo "grub.cfg backup already exists, so the new one wasn't made."
+        echo "Now off we go to edit the file...."
+    else
+	echo "Making backup of grub.cfg as /boot/grub/grub.cfg.BKUP"
+        cp /boot/grub/grub.cfg /boot/grub/grub.cfg.BKUP
+        echo ""
+    fi
+}
+
+function grub_restore
+{
+    is_root || return
+
+    echo "Are you sure? This will replace your /boot/grub/grub.cfg."
+    echo "[Y/n]"
+    local reply
+    read reply
+    if [[ $reply != "" && $reply != "y" && $reply != "Y" ]]; then
+        echo "OK, aborting."
+        return
+    fi
+
+    if [[ -f /boot/grub/grub.cfg.BKUP ]]
+    then
+        echo "grub.cfg backup (/boot/grub/grub.cfg.BKUP) exists, whew!"
+        cp /boot/grub/grub.cfg.BKUP /boot/grub/grub.cfg
+        echo ""
+        echo "The original grub.cfg has been restored"
+    else
+        echo "UH OH!! The backup script /boot/grub/grub.cfg.BKUP hasn't been made."
+        echo "Don't panic, you can use the Sabayon installer to repair GRUB."
+    fi
+}
+
+function horner
+{
+
+# Quick system info gatherer written for Sabayon GNU/Linux
+#(http://sabayonlinux.org)
+# Copyright 2008 Richard Edward Horner
+# Last modified 2008-11-26
+# Please send all comments, suggestions, bugs and patches to (rich AT
+#richhorner DOT com)
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+HOSTNAME=`hostname`
+RELEASE=`cat /etc/sabayon-release`
+CPU=`uname -p`
+KERNEL=`uname -r`
+KERN_ARCH=`uname -m`
+DISK=`df -lT --exclude-type=tmpfs --exclude-type=rootfs | awk 'BEGIN { total = 0; used = 0 } { if (NR > 1) { total += $3; used += $4 } } END { printf "%.1f/%.1fGB", used / 1000000, total / 1000000 }'`
+MEMORY=`cat /proc/meminfo | awk '{ if ($1 == "MemTotal:") { memtot = $2/1000 } else if ($1 == "MemFree:") { memfree = $2/1000 } } END { printf "%d/%dM", memfree, memtot }'`
+DAYS=`cat /proc/uptime | awk '{ printf "%.1f", $1/86400 }'`
+PROCS=`ps aux | awk 'END { print NR - 2 }'`
+RENDERER=`glxinfo | awk -F : '{ if ($1 == "OpenGL renderer string") print $2 }'`
+
+echo "Sysinfo for '$HOSTNAME': $RELEASE with $KERN_ARCH kernel $KERNEL
+on $CPU, HD: $DISK, MEM: $MEMORY, Renderer: $RENDERER, $PROCS procs,
+up $DAYS days"
+
+}
+
+# echo -e "\a[pastebunz debug ON]" >&2;
+# function pastebunz { sed 's/^/[pb] '/ | less; }
+
+# pastebunz seems to have some limit on max pasted lines, so this would be handy...
+function files_pastebin_linelimit
+{
+    # args: limit file_to_pastebin [file_to_pastebin] ...
+    # example: file_pastebin_linelimit 30 file1 "file name2" file3
+    # first arg: 0 means no limit
+    # By Enlik <sn at ubucentrum.net>
+    local TMPFILE=~/newbietmp
+    local LINESLIMIT
+    local LLIMIT_H
+
+    if [[ $# -le 1 ]]; then
+        echo "Error: no files to paste (in files_pastebin_linelimit)." >&2
+        return 2
+    fi
+
+    let LINESLIMIT=$1
+    shift
+    # If there is a limit of lines, we need to make space for file name and blank
+    # lines to be pasted. Otherwise we have as much space as we want.
+    if [[ $LINESLIMIT -eq 0 ]]; then
+        LLIMIT_H="+1"
+    else
+        LLIMIT_H=$(( LINESLIMIT - 3 ))
+    fi
+
+    >"$TMPFILE" || {
+        echo "Oh no! I can't create temporary file... Aborting." >&2
+        return 3
+    }
+
+    for file in "$@"; do
+        echo " --- file: $file ---"
+        echo " "
+        if [[ -r $file ]]; then
+            # This tail guarantees that LAST file name is visible (unless the limit is really small, <= 2 lines)
+            # (previous one(s) can be wiped by tail due to limit of lines).
+            # The file name is always visible if there's only one specified
+            # as argument (unless the limit value is really small, as above).
+            # All file names are always visible if there's no limit
+            # of lines, or the limit is big enough.
+            cat "$file" 2>&1 | tail -n $LLIMIT_H
+    elif [[ -e $file ]]; then
+	    echo "THIS FILE COULDN'T BE READ."
+	else
+	    echo "THIS FILE DOESN'T EXIST."
+	fi
+        echo " "
+    done >> "$TMPFILE"
+    if [[ $LINESLIMIT -eq 0 ]]; then
+        cat "$TMPFILE" | pastebunz
+    else
+        tail -n $LINESLIMIT "$TMPFILE" | pastebunz
+    fi
+    echo "** Please see the link above! **"
+
+    rm "$TMPFILE"
+    return 0
+}
+
+function files_pastebin
+{
+    files_pastebin_linelimit 0 "$@"
+}
+
+function system_pastebin
+{
+    echo -n "Please wait, it is going to take a while..."
+    local PASTE_TMP=/tmp/sabutil-tmp
+
+    >"$PASTE_TMP" || {
+	echo "Oh no! I can't create temporary file... Aborting."
+        return 1
+    }
+
+    echo "
+    sh /sbin/logscript.sh
+    " >> "$PASTE_TMP"
+    sh "/sbin/logscript.sh" >> "$PASTE_TMP"
+
+    cat "$PASTE_TMP"
+    cat "$PASTE_TMP" | pastebunz
+    echo "*** Please see the link above. ***"
+    rm "$PASTE_TMP"
+}
+
+function xorg0log_pastebin
+{
+    tail -n 150 /var/log/Xorg.0.log
+    files_pastebin_linelimit 150 /var/log/Xorg.0.log
+}
+
+function xsessionerrors_pastebin
+{
+    cat "$HOMEDIR/.xsession-errors" | tail -n 10
+    files_pastebin_linelimit 150 "$HOMEDIR/.xsession-errors"
+    if [[ $USER = "root" ]]; then
+        echo
+        echo "Notice: root's .xsession-errors file has been pasted."
+        echo "To get .xsession-errors from your regular account on which"
+        echo "you are logged using GDM, KDM or so (which is probably what you want),"
+        echo "run this script as that user, not root, or pastebin .xsession-errors"
+        echo "from YOUR home directory manually."
+        echo
+    fi
+}
+
+function dmesg_pastebin
+{
+    cat /var/log/dmesg
+    files_pastebin_linelimit 150 /var/log/dmesg
+}
+
+function grub_pastebin
+{
+    cat /boot/grub/grub.cfg
+    files_pastebin /boot/grub/grub.cfg
+}
+
+function fdisk_pastebin
+{
+    is_root || return # fdisk -l
+
+    local PASTE_TMP=/tmp/sabutil-tmp
+
+    >"$PASTE_TMP" || {
+	echo "Oh no! I can't create temporary file... Aborting."
+	return 1
+    }
+
+    (
+    echo "
+    fdisk -l
+    ";
+    fdisk -l;
+    ) > "$PASTE_TMP"
+
+    cat "$PASTE_TMP"
+    cat "$PASTE_TMP" | pastebunz
+    echo "*** Please see the link above. ***"
+    rm "$PASTE_TMP"
+}
+
+function messages_pastebin
+{
+    tail -n 150 /var/log/messages
+    files_pastebin_linelimit 150 /var/log/messages
+}
+
+function kdm_pastebin
+{
+    cat /var/log/kdm.log
+    files_pastebin_linelimit 150 /var/log/kdm.log
+}
+
+function rclog_pastebin
+{
+    if [[ -f /var/log/rc.log ]]; then
+        cat /var/log/rc.log | tail -n 10
+        files_pastebin_linelimit 150 /var/log/rc.log
+    else
+        echo "You Don't Have rc.log enabled in your /etc/rc.log"
+        echo " To enable, edit /etc/rc.log change NO to YES for rc_logger= "
+        echo ""
+    fi
+}
+
+function rcupdate_pastebin
+{
+    local PASTE_TMP=/tmp/sabutil-tmp
+
+    >"$PASTE_TMP" || {
+	echo "Oh no! I can't create temporary file... Aborting."
+	return 1
+    }
+
+    (
+    echo "
+    rc-update show
+    ";
+    rc-update show
+    ) > "$PASTE_TMP"
+
+    cat "$PASTE_TMP"
+    cat "$PASTE_TMP" | pastebunz
+    echo "*** Please see the link above. ***"
+    rm "$PASTE_TMP"
+}
+
+function xorg_pastebin
+{
+    echo "These files will be pasted (don't worry if any of them don't exist):"
+    ls -l /etc/X11/xorg.conf /etc/X11/xorg.conf.d/*
+    files_pastebin /etc/X11/xorg.conf.d/* /etc/X11/xorg.conf
+}
+
+function xorg_edit
+{
+    is_root &> /dev/null || echo "You are not root. You will only be able to view files."
+
+    local xorgfiles=() file
+    if (shopt -s nullglob; f=(/etc/X11/xorg.conf.d/*.conf); [[ ${#f[*]} -ne 0 ]] ); then
+	xorgfiles=( /etc/X11/xorg.conf.d/* ) # let's put all non-dot files; warning for non-conf is below
+    fi
+
+    if [[ -f /etc/X11/xorg.conf ]]; then
+            xorgfiles+=( /etc/X11/xorg.conf )
+    fi
+
+    if [[ ${#xorgfiles[*]} -eq 0 ]]; then
+        echo "I can't find any Xorg configuration files."
+        echo "There's no /etc/X11/xorg.conf or .conf files in /etc/X11/xorg.conf.d/ directory."
+        echo "Xorg uses autodected settings."
+    else
+        echo "These files affect your Xorg configuration."
+        echo "See http://fedoraproject.org/wiki/Input_device_configuration#xorg.conf.d for more informations."
+        echo "Select a file to edit or type q and press Enter to quit."
+        select file in "${xorgfiles[@]}"; do
+            if [[ -n $file ]]; then
+            # Not sure about files that don't start with a number and a hyphen - are they used?
+                if [[ ${file##*.} != "conf" ]]; then
+                    echo "Warning: this file has no .conf suffix and thus will be ignored by Xorg."
+                    press_enter
+                fi
+                nano -w "$file"
+                echo "Select a file to edit or type q and press Enter to quit."
+            elif [[ $REPLY = "q" || $REPLY = "Q" ]]; then
+                break
+            fi
+        done
+    fi
+}
+
+clear
+
+if [[ $1 = "menu" ]]; then
+    if [[ $EUID -ne 0 ]]; then
+        echo "This script should be run as root, or by someone in the root group. Some commands will not work for you." 1>&2
+	echo ""
+    fi
+    menu
+elif [[ $1 = "--help" || $1 = "-h" ]]; then
+    echo "usage:"
+    echo "$0 - will print some basic system infos"
+    echo "$0 menu - will show you menu"
+else
+    horner
+    echo ""
+    echo "Specify --help or -h to get help."
+ fi
diff --git a/app-misc/rogentoslive-tools/files/1.0/vga-cmd-parser b/app-misc/rogentoslive-tools/files/1.0/vga-cmd-parser
new file mode 100644
index 00000000..1e443171
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/vga-cmd-parser
@@ -0,0 +1,53 @@
+#!/usr/bin/python
+# Copyright 2008 Fabio Erculiani, Sabayon Linux Chief Architect
+# parses vga= parameters from cmdline given by isolinux and returns the right resolution
+# Shut up!
+
+res_map = {
+	"0x385": ("640x400",24),
+	"0x312": ("640x480",24),
+	"0x315": ("800x600",24),
+	"0x318": ("1024x768",24),
+	"0x31b": ("1280x1024",24),
+	"0x330": ("640x400",16),
+	"0x33E": ("640x400",24),
+	"0x331": ("640x480",16),
+	"0x33F": ("640x480",24),
+	"0x332": ("800x600",16),
+	"0x340": ("800x600",24),
+	"0x333": ("1024x768",16),
+	"0x341": ("1024x768",24),
+	"0x334": ("1152x864",16),
+	"0x342": ("1152x864",24),
+	"0x335": ("1280x960",16),
+	"0x343": ("1280x960",24),
+	"0x336": ("1280x1024",16),
+	"0x344": ("1280x1024",24),
+	"0x337": ("1400x1050",16),
+	"0x345": ("1400x1050",24),
+	"0x338": ("1600x1200",16),
+	"0x346": ("1600x1200",24),
+	"0x339": ("1792x1344",16),
+	"0x347": ("1792x1344",24),
+	"0x33A": ("1856x1392",16),
+	"0x348": ("1856x1392",24),
+	"0x33B": ("1920x1440",16),
+	"0x349": ("1920x1440",24),
+	"0x33C": ("2048x1536",16),
+	"0x34A": ("2048x1536",24)
+}
+
+f = open("/proc/cmdline")
+cmdline = f.readline().strip().split()
+cmdline.reverse()
+for item in cmdline:
+	if item.startswith("vga="):
+		item_split = item.split("=")
+		if len(item_split) == 2:
+			data = item_split[1]
+			try:
+				if res_map.get(data) != None:
+					print res_map[data][0],res_map[data][1]
+				break
+			except TypeError:
+				pass
diff --git a/app-misc/rogentoslive-tools/files/1.0/x-setup-configuration b/app-misc/rogentoslive-tools/files/1.0/x-setup-configuration
new file mode 100644
index 00000000..57f1688f
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/x-setup-configuration
@@ -0,0 +1,60 @@
+#!/bin/bash
+
+# get livecd functions
+source /sbin/livecd-functions.sh
+source /sbin/rogentos-functions.sh
+
+runtime_linking_proprietary_drivers() {
+	if [ -d "/lib/nvidia" ] || [ -d "/lib/fglrx" ]; then
+		current_arch=$(uname -m)
+		if [ "$current_arch" == "x86_64" ]; then
+			ld_arch="elf_x86_64"
+		elif [ "$current_arch" == "i686" ]; then
+			ld_arch="elf_i386"
+		fi
+		lspci_vga=$(lspci | grep ' VGA ')
+		mount -t tmpfs none /lib/modules/$(uname -r)/video
+		if [ -n "`echo $lspci_vga | grep -i nvidia`" ]; then
+			ld -m $ld_arch -r -o /lib/modules/$(uname -r)/video/nvidia.ko /lib/nvidia/nvidia.o /lib/nvidia/nvidia.mod.o
+			depmod -a &> /dev/null
+		elif [ -n "`echo $lspci_vga | grep -i ati`" ]; then
+			ld -m $ld_arch -r -o /lib/modules/$(uname -r)/video/fglrx.ko /lib/fglrx/fglrx.o /lib/fglrx/fglrx.mod.o
+			depmod -a &> /dev/null
+		elif [ -n "`echo $lspci_vga | grep -i unknown`" ]; then
+			ld -m $ld_arch -r -o /lib/modules/$(uname -r)/video/nvidia.ko /lib/nvidia/nvidia.o /lib/nvidia/nvidia.mod.o
+			ld -m $ld_arch -r -o /lib/modules/$(uname -r)/video/fglrx.ko /lib/fglrx/fglrx.o /lib/fglrx/fglrx.mod.o
+			depmod -a &> /dev/null
+		elif [ -z "$lspci_vga" ]; then
+			ld -m $ld_arch -r -o /lib/modules/$(uname -r)/video/nvidia.ko /lib/nvidia/nvidia.o /lib/nvidia/nvidia.mod.o
+			ld -m $ld_arch -r -o /lib/modules/$(uname -r)/video/fglrx.ko /lib/fglrx/fglrx.o /lib/fglrx/fglrx.mod.o
+			depmod -a &> /dev/null
+		fi
+	fi
+}
+
+buggy_fglrx_xv_fixup_code() {
+	# This is a workaround for xv being broken
+	# on fglrx <12.2, disable Xv in xorg.conf.d
+	local workaround_file=/usr/share/rogentoslive-tools/xorg.conf.d/90-fglrx-12.1-and-older-workaround.conf
+	if [ -f "${workaround_file}" ]; then
+		is_fglrx=$(/bin/lsmod | grep ^fglrx)
+		if [ -n "${is_fglrx}" ]; then
+			cp "${workaround_file}" /usr/share/X11/xorg.conf.d
+		fi
+	fi
+}
+
+# create seed
+rm -f /etc/x-setup-configuration-running
+touch /etc/x-setup-configuration-running
+
+# Prepare Video Cards Proprietary Drivers
+if sabayon_is_live; then
+	runtime_linking_proprietary_drivers
+fi
+/sbin/gpu-configuration &> /dev/null
+
+# buggy_fglrx_xv_fixup_code
+
+# delete seed
+rm -f /etc/x-setup-configuration-running
diff --git a/app-misc/rogentoslive-tools/files/1.0/x-setup-init.d b/app-misc/rogentoslive-tools/files/1.0/x-setup-init.d
new file mode 100755
index 00000000..5b94ec94
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/x-setup-init.d
@@ -0,0 +1,68 @@
+#!/sbin/runscript
+# Copyright 2009-2012 Fabio Erculiani - Sabayon Linux
+# Distributed under the terms of the GNU General Public License v2
+
+depend() {
+    after mtab
+    before hostname
+    before xdm
+}
+
+gpus_same() {
+    # $1 and $2: output lines from "lspci"
+    local id1 id2 # [xxxx:]xx:xx.x
+    local dev1 dev2 # vendor and device: xxxx:xxxx
+    id1=$(echo "$1" | awk '/ VGA / { print $1 }')
+    id2=$(echo "$2" | awk '/ VGA / { print $1 }')
+    if [ -z "$id1" ] || [ -z "$id2" ]; then
+        return 1
+    fi
+    dev1=$(lspci -s "$id1" -n | awk '{ print $3 }')
+    dev2=$(lspci -s "$id2" -n | awk '{ print $3 }')
+    [ "$dev1" = "$dev2" ]
+}
+
+start() {
+    . /sbin/rogentos-functions.sh
+    local do_redetect
+    do_redetect=$(cat /proc/cmdline | grep "gpudetect")
+
+    if sabayon_is_live; then
+        ebegin "Configuring GPU Hardware Acceleration and Input devices"
+        start-stop-daemon --start --background --pidfile /var/run/x-setup.pid --make-pidfile --exec /usr/sbin/x-setup-configuration
+        eend 0
+    else
+        if [ -e /first_time_run ] || [ ! -e /etc/gpu-detector.conf ] \
+          || [ -n "$do_redetect" ] || [ ! -f /etc/X11/xorg.conf ]; then
+            ebegin "Configuring GPU Hardware Acceleration and Input devices for the first time"
+            # store config file
+            lspci | grep ' VGA ' > /etc/gpu-detector.conf
+            /usr/sbin/x-setup-configuration
+            eend 0
+            return
+        fi
+
+        local lspci_vga stored_vga
+        local infostr_run="Configuring GPU Hardware Acceleration and Input devices"
+        local infostr_skip="Skipping GPU Hardware Acceleration and Input devices configuration"
+        lspci_vga=$(lspci | grep ' VGA ')
+        stored_vga=$(cat /etc/gpu-detector.conf)
+
+        if [ "$lspci_vga" != "$stored_vga" ] ;  then
+            # Strings are different, let's do the more "heavy" and accurate comparison.
+            if gpus_same "$lspci_vga" "$stored_vga"; then
+                # this may happen after vendor changes its name etc. and PCI ID file is updated
+                ebegin "${infostr_skip}, only updating GPU information file"
+            else
+                ebegin "$infostr_run"
+                /usr/sbin/x-setup-configuration &> /dev/null
+            fi
+
+            echo "$lspci_vga" > /etc/gpu-detector.conf
+            eend 0
+            return
+        fi
+
+        einfo "$infostr_skip"
+    fi
+}
diff --git a/app-misc/rogentoslive-tools/files/1.0/xorg.conf.d/90-fglrx-12.1-and-older-workaround.conf b/app-misc/rogentoslive-tools/files/1.0/xorg.conf.d/90-fglrx-12.1-and-older-workaround.conf
new file mode 100644
index 00000000..54478aa9
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/xorg.conf.d/90-fglrx-12.1-and-older-workaround.conf
@@ -0,0 +1,4 @@
+Section "Extensions"
+	# This should be hopefully fixed in ati-drivers-12.2
+	Option "XVideo" "Disable"
+EndSection
diff --git a/app-misc/rogentoslive-tools/files/1.0/xorg.conf.d/90-synaptics.conf b/app-misc/rogentoslive-tools/files/1.0/xorg.conf.d/90-synaptics.conf
new file mode 100644
index 00000000..245b2458
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/xorg.conf.d/90-synaptics.conf
@@ -0,0 +1,58 @@
+Section "InputClass"
+	Identifier "touchpad catchall"
+	Driver "synaptics"
+	MatchIsTouchpad "on"
+	MatchDevicePath "/dev/input/event*"
+
+	# No longer needed, see bug 1922#12
+	# Option "SHMConfig" "1"
+	# More harm than good? see bug 1922#12
+	# Option "MaxTapMove" "2000"
+	Option "VertEdgeScroll" "1"
+	Option "VertTwoFingerScroll" "1"
+	Option "HorizTwoFingerScroll" "1"
+	Option "CircularScrolling" "0"
+	Option "TapButton1" "1"
+	Option "TapButton2" "2"
+	Option "TapButton3" "3"
+	
+EndSection
+
+# Apple MacBook Touchpad
+Section "InputClass"
+	Identifier "touchpad catchall"
+	Driver "synaptics"
+	MatchIsTouchpad "on"
+	MatchDevicePath "/dev/input/event*"
+	MatchProduct "bcm5974"
+	Option "ClickFinger1" "1"
+	Option "ClickFinger2" "3"
+	Option "ClickFinger3" "2"
+	Option "HorizEdgeScroll" "0"
+	Option "VertEdgeScroll" "0"
+	Option "VertEdgeScroll" "1"
+	Option "VertTwoFingerScroll" "1"
+	Option "HorizTwoFingerScroll" "1"
+	Option "HorizScrollDelta" "0"
+	Option "VertScrollDelta" "40"
+	Option "PressureMotionMinZ" "10"
+	Option "FingerLow" "16"
+	Option "FingerHigh" "80"
+	Option "FingerPress" "256"
+	Option "PalmDetect" "1"
+	Option "PalmMinWidth" "10"
+	Option "PalmMinZ" "200"
+	Option "MinSpeed" "0.8"
+	Option "MaxSpeed" "1.2"
+	Option "AccelFactor" "0.10"
+	Option "MaxTapMove" "25"
+	Option "MaxTapTime" "223"
+	Option "MaxDoubleTapTime" "200"
+	Option "TapButton1" "0"
+	Option "TapButton2" "0"
+	Option "TapButton3" "0"
+	Option "RTCornerButton" "0"
+	Option "RBCornerButton" "0"
+	Option "LTCornerButton" "0"
+	Option "LBCornerButton" "0"
+EndSection
diff --git a/app-misc/rogentoslive-tools/files/1.0/xorg.conf.rogentos b/app-misc/rogentoslive-tools/files/1.0/xorg.conf.rogentos
new file mode 100644
index 00000000..bc6135c3
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/xorg.conf.rogentos
@@ -0,0 +1,100 @@
+Section "Module"
+    SubSection  "extmod"
+       Option    "omit xfree86-dga"
+    EndSubSection
+    Load	"i2c"
+    Load	"ddc"
+    Load	"vbe"
+#   Load        "dri"
+EndSection
+
+
+Section "ServerFlags"
+     Option 	"AllowMouseOpenFail" "true"
+EndSection
+
+# **********************************************************************
+# Monitor section
+# **********************************************************************
+
+# Any number of monitor sections may be present
+
+Section "Monitor"
+    Identifier	"Generic Monitor"
+    VertRefresh 43 - 60
+    HorizSync	28 - 80
+EndSection
+
+# **********************************************************************
+# Graphics device section
+# **********************************************************************
+
+# Any number of graphics device sections may be present
+
+Section "Device"
+    Identifier  "VESA"
+    Driver      "vesa" # do not remove vesa
+    #Option "RenderAccel" "on"
+    #Option "XAANoOffscreenPixmaps"
+    #Option "BusType" "PCI"
+    #Option "ColorTiling" "on"
+    #Option "EnablePageFlip" "on"
+    Option "UseEvents" "True"
+EndSection
+
+
+# **********************************************************************
+# Screen sections.
+# **********************************************************************
+
+Section "Screen"
+
+# The Identifier, Device and Monitor lines must be present
+
+    Identifier	"Screen 1"
+    Device	"VESA"
+    Monitor	"Generic Monitor"
+    #Option "AddARGBGLXVisuals" "true"
+
+# The favoured Depth and/or Bpp may be specified here
+
+    DefaultDepth 24
+
+    SubSection "Display"
+        Depth		8
+        ViewPort	0 0
+        #Modes		"1024x768" "800x600" "640x480"
+    EndSubsection
+
+    SubSection "Display"
+        Depth           16
+        ViewPort        0 0
+        #Modes		"1024x768" "800x600" "640x480"
+    EndSubsection
+
+    SubSection "Display"
+        Depth           24
+        ViewPort        0 0
+        #Modes		"1024x768" "800x600" "640x480"
+    EndSubsection
+
+
+EndSection
+
+
+Section "ServerLayout"
+# The Identifier line must be present
+
+    Identifier	"Main Layout"
+    Screen 0 	"Screen 1"
+
+EndSection
+
+Section "DRI"
+    Mode 0666
+EndSection
+
+Section "Extensions"
+   #Option "Composite" "Enable"
+EndSection
+
diff --git a/app-misc/rogentoslive-tools/files/2/bashlogin b/app-misc/rogentoslive-tools/files/2/bashlogin
new file mode 100644
index 00000000..34689189
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/bashlogin
@@ -0,0 +1,6 @@
+#!/bin/bash
+
+cat /etc/motd 2>/dev/null
+cd /root
+[[ -e .bash_profile ]] && source .bash_profile
+exec -l /bin/bash -i
diff --git a/app-misc/rogentoslive-tools/files/2/cdeject b/app-misc/rogentoslive-tools/files/2/cdeject
new file mode 100644
index 00000000..302a3415
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/cdeject
@@ -0,0 +1,11 @@
+#!/sbin/runscript
+
+description="Eject LiveCD/DVD at live system shutdown/reboot"
+
+depend() {
+	after *
+}
+
+start() {
+	/usr/libexec/cdeject.sh
+}
diff --git a/app-misc/rogentoslive-tools/files/2/cdeject.service b/app-misc/rogentoslive-tools/files/2/cdeject.service
new file mode 100644
index 00000000..96f44242
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/cdeject.service
@@ -0,0 +1,13 @@
+[Unit]
+Description=Eject CD/DVD before power off or reboot
+DefaultDependencies=no
+After=shutdown.target
+Before=final.target
+
+[Service]
+Type=oneshot
+RemainAfterExit=true
+ExecStart=/usr/libexec/cdeject.sh
+
+[Install]
+WantedBy=multi-user.target
\ No newline at end of file
diff --git a/app-misc/rogentoslive-tools/files/2/cdeject.sh b/app-misc/rogentoslive-tools/files/2/cdeject.sh
new file mode 100644
index 00000000..ae75ae84
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/cdeject.sh
@@ -0,0 +1,12 @@
+#!/bin/bash
+
+is_live=$(cat /proc/cmdline | grep cdroot)
+
+if [ -n "${is_live}" ]; then
+    cdrom_dev=$(cat /proc/mounts | grep " /mnt/cdrom " | cut -d" " -f 1)
+    # check if /mnt/cdrom device is a cdrom device
+    if [ "${cdrom_dev}" = /dev/sr* ] || [ "${cdrom_dev}" = /dev/cdrom* ]; then
+        eject -mp "${cdrom_dev}" &> /dev/null
+    fi
+fi
+
diff --git a/app-misc/rogentoslive-tools/files/2/installer-gui b/app-misc/rogentoslive-tools/files/2/installer-gui
new file mode 100644
index 00000000..5300726d
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/installer-gui
@@ -0,0 +1,15 @@
+#!/sbin/runscript
+# Copyright 2004-2013 Sabayon
+# Distributed under the terms of the GNU General Public License v2
+
+depend() {
+	before xdm
+	after rogentoslive
+	need dbus
+}
+
+start() {
+	ebegin "Configuring the installer"
+	/usr/libexec/installer-gui.sh
+	eend $?
+}
diff --git a/app-misc/rogentoslive-tools/files/2/installer-gui.service b/app-misc/rogentoslive-tools/files/2/installer-gui.service
new file mode 100644
index 00000000..963245ca
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/installer-gui.service
@@ -0,0 +1,12 @@
+[Unit]
+Description=Sabayon installer setup
+Before=display-manager.service
+After=rogentoslive.service
+
+[Service]
+Type=oneshot
+RemainAfterExit=true
+ExecStart=/usr/libexec/installer-gui.sh
+
+[Install]
+WantedBy=multi-user.target
\ No newline at end of file
diff --git a/app-misc/rogentoslive-tools/files/2/installer-gui.sh b/app-misc/rogentoslive-tools/files/2/installer-gui.sh
new file mode 100644
index 00000000..7636678d
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/installer-gui.sh
@@ -0,0 +1,8 @@
+#!/bin/bash
+
+. /sbin/rogentos-functions.sh
+
+if rogentos_is_gui_install; then
+	rogentos_setup_autologin
+	rogentos_setup_gui_installer
+fi
diff --git a/app-misc/rogentoslive-tools/files/2/installer-text b/app-misc/rogentoslive-tools/files/2/installer-text
new file mode 100644
index 00000000..faada208
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/installer-text
@@ -0,0 +1,13 @@
+#!/sbin/runscript
+# Copyright 2004-2013 Sabayon Linux
+# Distributed under the terms of the GNU General Public License v2
+
+depend() {
+	after *
+}
+
+start() {
+	ebegin "Configuring the text installer"
+	/usr/libexec/installer-text.sh
+	eend $?
+}
diff --git a/app-misc/rogentoslive-tools/files/2/installer-text.service b/app-misc/rogentoslive-tools/files/2/installer-text.service
new file mode 100644
index 00000000..be11d2b7
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/installer-text.service
@@ -0,0 +1,11 @@
+[Unit]
+Description=Sabayon text installer setup
+After=rogentoslive.service
+
+[Service]
+Type=oneshot
+RemainAfterExit=true
+ExecStart=/usr/libexec/installer-text.sh
+
+[Install]
+WantedBy=multi-user.target
diff --git a/app-misc/rogentoslive-tools/files/2/installer-text.sh b/app-misc/rogentoslive-tools/files/2/installer-text.sh
new file mode 100644
index 00000000..8bb1262b
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/installer-text.sh
@@ -0,0 +1,7 @@
+#!/bin/bash
+
+. /sbin/rogentos-functions.sh
+
+if rogentos_is_text_install; then
+	rogentos_setup_text_installer
+fi
diff --git a/app-misc/rogentoslive-tools/files/2/livecd-functions.sh b/app-misc/rogentoslive-tools/files/2/livecd-functions.sh
new file mode 100644
index 00000000..5e0c4600
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/livecd-functions.sh
@@ -0,0 +1,635 @@
+#!/bin/bash
+
+# Global Variables:
+#    CDBOOT                  -- is booting off CD
+#    LIVECD_CONSOLE          -- console that is specified on commandline 
+#                            -- (ttyS0, etc) Only defined if passed to kernel
+#    LIVECD_CONSOLE_BAUD     -- console baudrate specified
+#    LIVECD_CONSOLE_PARITY   -- console parity specified
+#    LIVECD_CONSOLE_DATABITS -- console databits specified
+
+[[ ${RC_GOT_FUNCTIONS} != "yes" ]] && \
+	[[ -e /etc/init.d/functions.sh ]] && \
+	source /etc/init.d/functions.sh
+
+# emulating einfo since it's not always available from functions.sh
+# FIXME: fix functions.sh
+einfo() {
+	[[ -x "/lib/rc/bin/einfo" ]] && /lib/rc/bin/einfo "${1}"\
+		|| echo "* ${1}"
+}
+
+livecd_parse_opt() {
+	case "$1" in
+		*\=*)
+			echo "$1" | cut -f2 -d=
+		;;
+	esac
+}
+
+livecd_check_root() {
+	if [ "$(whoami)" != "root" ]
+	then
+		echo "ERROR: must be root to continue"
+		return 1
+	fi
+}
+
+livecd_get_cmdline() {
+	echo "0" > /proc/sys/kernel/printk
+	CMDLINE=$(cat /proc/cmdline)
+	export CMDLINE
+}
+
+no_gl() {
+#	einfo "If you have a card that you know is supported by either the ATI or"
+#	einfo "NVIDIA binary drivers, please file a bug with the output of lspci"
+#	einfo "on http://bugs.gentoo.org so we can resolve this."
+	GLTYPE=xorg-x11
+}
+
+ati_gl() {
+	einfo "ATI card detected."
+	if [ -e /usr/lib/xorg/modules/drivers/fglrx_drv.so ] \
+	|| [ -e /usr/lib/modules/drivers/fglrx_drv.so ]
+	then
+		GLTYPE=ati
+	else
+		GLTYPE=xorg-x11
+	fi
+}
+
+nv_gl() {
+	einfo "NVIDIA card detected."
+	if [ -e /usr/lib/xorg/modules/drivers/nvidia_drv.so ] \
+	|| [ -e /usr/lib/modules/drivers/nvidia_drv.so ]
+	then
+		GLTYPE=nvidia
+	else
+		GLTYPE=xorg-x11
+	fi
+}
+
+nv_no_gl() {
+	einfo "NVIDIA card detected."
+	echo
+	if [ -e /usr/lib/xorg/modules/drivers/nvidia_drv.so ] \
+	|| [ -e /usr/lib/modules/drivers/nvidia_drv.so ]
+	then
+		einfo "This card is not supported by the latest version of the NVIDIA"
+		einfo "binary drivers.  Switching to the X server's driver instead."
+	fi
+	GLTYPE=xorg-x11
+	sed -i 's/nvidia/nv/' /etc/X11/xorg.conf
+}
+
+get_video_cards() {
+	[ -x /sbin/lspci ] && VIDEO_CARDS="$(/sbin/lspci | grep ' VGA ')"
+	[ -x /usr/sbin/lspci ] && VIDEO_CARDS="$(/usr/sbin/lspci | grep ' VGA ')"
+	#NUM_CARDS="$(echo ${VIDEO_CARDS} | wc -l)"
+	#if [ ${NUM_CARDS} -eq 1 ] # Disabled to support NVIDIA SLI devices
+	#then
+		NVIDIA=$(echo ${VIDEO_CARDS} | grep -i "nVidia Corporation")
+		ATI=$(echo ${VIDEO_CARDS} | grep -i "ATI Technologies")
+		if [ -n "${NVIDIA}" ]
+		then
+			# Always set NVIDIA OpenGL, since it's stupid doing the contrary because:
+			# there's no X.Org free driver that supports OpenGL through MESA
+			nv_gl
+		elif [ -n "${ATI}" ]
+		then
+			ATI_CARD=$(echo ${ATI} | awk 'BEGIN {RS=" "} /(R|RV|RS|M)[0-9]+/ {print $1}')
+			if [ $(echo ${ATI_CARD} | grep S) ]
+			then
+				ATI_CARD_OUT=$(echo ${ATI_CARD} | cut -dS -f2)
+			elif [ $(echo ${ATI_CARD} | grep V) ]
+			then
+				ATI_CARD_OUT=$(echo ${ATI_CARD} | cut -dV -f2)
+			elif [ $(echo ${ATI_CARD} | grep M)  ]
+			then
+				# ATI Technologies Inc. M52 [ ATI Mobility Radeon X1300 ]
+				ATI_CARD_OUT=$(echo ${ATI_CARD} | cut -dM -f2)
+			else
+				ATI_CARD_OUT=$(echo ${ATI_CARD} | cut -dR -f2)
+			fi
+
+			if [ -n "${ATI_CARD_OUT}" ] && [ ${ATI_CARD_OUT} -ge 300 ]
+			then
+				ati_gl
+			elif [ -n "${ATI_CARD_OUT}" ] && [ -n "`echo ${ATI_CARD} | grep M`" ]
+			then
+				# this is an ATI Mxx card
+				ati_gl
+			# >8.29.6 does not support R200 anymore
+			elif [ -n "${ATI_CARD_OUT}" ] && [ ${ATI_CARD_OUT} -ge 200 ]
+			then
+				no_gl
+			else
+				# set ATI OpenGL anyway
+				ati_gl
+			fi
+		else
+			no_gl
+		fi
+	#fi
+}
+
+livecd_config_wireless() {
+	cd /tmp/setup.opts
+	[ -x /usr/sbin/iwconfig ] && iwconfig=/usr/sbin/iwconfig
+	[ -x /sbin/iwconfig ] && iwconfig=/sbin/iwconfig
+	dialog --title "SSID" --inputbox "Please enter your SSID, or leave blank for selecting the nearest open network" 20 50 2> ${iface}.SSID
+	SSID=$(tail -n 1 ${iface}.SSID)
+	if [ -n "${SSID}" ]
+	then
+		dialog --title "WEP (Part 1)" --menu "Does your network use encryption?" 20 60 7 1 "Yes" 2 "No" 2> ${iface}.WEP
+		WEP=$(tail -n 1 ${iface}.WEP)
+		case ${WEP} in
+			1)
+				dialog --title "WEP (Part 2)" --menu "Are you entering your WEP key in HEX or ASCII?" 20 60 7 1 "HEX" 2 "ASCII" 2> ${iface}.WEPTYPE
+				WEP_TYPE=$(tail -n 1 ${iface}.WEPTYPE)
+				case ${WEP_TYPE} in
+					1)
+						dialog --title "WEP (Part 3)" --inputbox "Please enter your WEP key in the form of XXXX-XXXX-XX for 64-bit or XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX for 128-bit" 20 50 2> ${iface}.WEPKEY
+						WEP_KEY=$(tail -n 1 ${iface}.WEPKEY)
+						if [ -n "${WEP_KEY}" ]
+						then
+							${iwconfig} ${iface} essid "${SSID}"
+							${iwconfig} ${iface} key "${WEP_KEY}"
+						fi
+					;;
+					2)
+						dialog --title "WEP (Part 3)" --inputbox "Please enter your WEP key in ASCII form.  This should be 5 or 13 characters for either 64-bit or 128-bit encryption, repectively" 20 50 2> ${iface}.WEPKEY
+						WEP_KEY=$(tail -n 1 ${iface}.WEPKEY)
+						if [ -n "${WEP_KEY}" ]
+						then
+							${iwconfig} ${iface} essid "${SSID}"
+							${iwconfig} ${iface} key "s:${WEP_KEY}"
+						fi
+					;;
+				esac
+			;;
+			2)
+				${iwconfig} ${iface} essid "${SSID}"
+				${iwconfig} ${iface} key off
+			;;
+		esac
+	fi
+}
+
+livecd_write_wireless_conf() {
+	cd /tmp/setup.opts
+	SSID=$(tail -n 1 ${iface}.SSID)
+	if [ -n "${SSID}" ]
+	then
+		echo "" >> /etc/conf.d/net
+		echo "# This wireless configuration file was built by net-setup" > /etc/conf.d/net
+		WEP=$(tail -n 1 ${iface}.WEPTYPE)
+		case ${WEP} in
+			1)
+				WEP_TYPE=$(tail -n 1 ${iface}.WEPTYPE)
+				if [ -n "${WEP_TYPE}" ]
+				then
+					WEP_KEY=$(tail -n 1 ${iface}.WEPKEY)
+					if [ -n "${WEP_KEY}" ]
+					then
+						SSID_TRANS=$(echo ${SSID//[![:word:]]/_})
+						case ${WEP_TYPE} in
+							1)
+								echo "key_${SSID_TRANS}=\"${WEP_KEY} enc open\"" >> /etc/conf.d/net
+							;;
+							2)
+								echo "key_${SSID_TRANS}=\"s:${WEP_KEY} enc open\"" >> /etc/conf.d/net
+							;;
+						esac
+					fi
+				fi
+			;;
+			2)
+				:
+			;;
+		esac
+		echo "preferred_aps=( \"${SSID}\" )" >> /etc/conf.d/net
+		echo "associate_order=\"forcepreferredonly\"" >> /etc/conf.d/net
+	fi
+}
+
+livecd_config_ip() {
+	cd /tmp/setup.opts
+	dialog --title "TCP/IP setup" --menu "You can use DHCP to automatically configure a network interface or you can specify an IP and related settings manually. Choose one option:" 20 60 7 1 "Use DHCP to auto-detect my network settings" 2 "Specify an IP address manually" 2> ${iface}.DHCP
+	DHCP=$(tail -n 1 ${iface}.DHCP)
+	case ${DHCP} in
+		1)
+			/sbin/dhclient -q -r -nw ${iface} &
+		;;
+		2)
+			dialog --title "IP address" --inputbox "Please enter an IP address for ${iface}:" 20 50 "192.168.1.1" 2> ${iface}.IP
+			IP=$(tail -n 1 ${iface}.IP)
+			BC_TEMP=$(echo $IP|cut -d . -f 1).$(echo $IP|cut -d . -f 2).$(echo $IP|cut -d . -f 3).255
+			dialog --title "Broadcast address" --inputbox "Please enter a Broadcast address for ${iface}:" 20 50 "${BC_TEMP}" 2> ${iface}.BC
+			BROADCAST=$(tail -n 1 ${iface}.BC)
+			dialog --title "Network mask" --inputbox "Please enter a Network Mask for ${iface}:" 20 50 "255.255.255.0" 2> ${iface}.NM
+			NETMASK=$(tail -n 1 ${iface}.NM)
+			dialog --title "Gateway" --inputbox "Please enter a Gateway for ${iface} (hit enter for none:)" 20 50 2> ${iface}.GW
+			GATEWAY=$(tail -n 1 ${iface}.GW)
+			dialog --title "DNS server" --inputbox "Please enter a name server to use (hit enter for none:)" 20 50 2> ${iface}.DNS
+			DNS=$(tail -n 1 ${iface}.DNS)
+			/sbin/ifconfig ${iface} ${IP} broadcast ${BROADCAST} netmask ${NETMASK}
+			if [ -n "${GATEWAY}" ]
+			then
+				/sbin/route add default gw ${GATEWAY} dev ${iface} netmask 0.0.0.0 metric 1
+			fi
+			if [ -n "${DNS}" ]
+			then
+				dialog --title "DNS Search Suffix" --inputbox "Please enter any domains which you would like to search on DNS queries (hit enter for none:)" 20 50 2> ${iface}.SUFFIX
+				SUFFIX=$(tail -n 1 ${iface}.SUFFIX)
+				echo "nameserver ${DNS}" > /etc/resolv.conf
+				if [ -n "${SUFFIX}" ]
+				then
+					echo "search ${SUFFIX}" >> /etc/resolv.conf
+				fi
+			fi
+		;;
+	esac
+}
+
+livecd_write_net_conf() {
+	cd /tmp/setup.opts
+	echo "# Sabayon Linux static network configuration tool" > /etc/conf.d/net
+	DHCP=$(tail -n 1 ${iface}.DHCP)
+	case ${DHCP} in
+		1)
+			echo "config_${iface}=\"dhcp\"" >> /etc/conf.d/net
+			echo "dhcp_${iface}=\"nosendhost\"" >> /etc/conf.d/net
+		;;
+		2)
+			IP=$(tail -n 1 ${iface}.IP)
+			BROADCAST=$(tail -n 1 ${iface}.BC)
+			NETMASK=$(tail -n 1 ${iface}.NM)
+			GATEWAY=$(tail -n 1 ${iface}.GW)
+			DNS="$(tail -n 1 ${iface}.DNS)"
+			DOMAIN="$(tail -n 1 ${iface}.SUFFIX)"
+			if [ -n "${IP}" -a -n "${BROADCAST}" -a -n "${NETMASK}" ]
+			then
+				echo "config_${iface}=\"${IP} netmask ${NETMASK} broadcast ${BROADCAST}\"" >> /etc/conf.d/net
+				if [ -n "${GATEWAY}" ]
+				then
+					echo "routes_${iface}=\"default via ${GATEWAY}\"" >> /etc/conf.d/net
+				fi
+				if [ -n "${DNS}" ]
+				then
+					echo "dns_servers_${iface}=\"${DNS}\"" >> /etc/conf.d/net
+				fi
+				if [ -n "${DOMAIN}" ]
+				then
+					echo "dns_search_${iface}=\"${DOMAIN}\"" >> /etc/conf.d/net
+				fi
+			fi
+		;;
+	esac
+}
+
+get_ifmac() {
+	local iface=$1
+
+	# Example: 00:01:6f:e1:7a:06
+	cat /sys/class/net/${iface}/address
+}
+
+
+get_ifdriver() {
+	local iface=$1
+
+	# Example: ../../../bus/pci/drivers/forcedeth (wanted: forcedeth)
+	local if_driver=$(readlink /sys/class/net/${iface}/device/driver)
+	basename ${if_driver}
+}
+
+get_ifbus() {
+	local iface=$1
+
+	# Example: ../../../bus/pci (wanted: pci)
+	# Example: ../../../../bus/pci (wanted: pci)
+	# Example: ../../../../../../bus/usb (wanted: usb)
+	local if_bus=$(readlink /sys/class/net/${iface}/device/bus)
+	basename ${if_bus}
+}
+
+livecd_rev_string() {
+	# See Sabayon #2522, cannot use /usr/bin/rev because
+	# /usr might not be mounted
+	local copy=${1}
+	len=${#copy}
+	for((i=$len-1;i>=0;i--)); do rev="$rev${copy:$i:1}"; done
+	echo ${rev}
+}
+
+get_ifproduct() {
+	local iface=$1
+	local bus=$(get_ifbus ${iface})
+	local if_pciaddr
+	local if_devname
+	local if_usbpath
+	local if_usbmanufacturer
+	local if_usbproduct
+
+	if [[ ${bus} == "pci" ]]
+	then
+		# Example: ../../../devices/pci0000:00/0000:00:0a.0 (wanted: 0000:00:0a.0)
+		# Example: ../../../devices/pci0000:00/0000:00:09.0/0000:01:07.0 (wanted: 0000:01:07.0)
+		if_pciaddr=$(readlink /sys/class/net/${iface}/device)
+		if_pciaddr=$(basename ${if_pciaddr})
+
+		# Example: 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
+		#  (wanted: nVidia Corporation CK804 Ethernet Controller)
+		if_devname=$(lspci -s ${if_pciaddr})
+		if_devname=${if_devname#*: }
+		if_devname=${if_devname%(rev *)}
+	fi
+
+	if [[ ${bus} == "usb" ]]
+	then
+		if_usbpath=$(readlink /sys/class/net/${iface}/device)
+		if_usbpath=/sys/class/net/${iface}/$(dirname ${if_usbpath})
+		if_usbmanufacturer=$(< ${if_usbpath}/manufacturer)
+		if_usbproduct=$(< ${if_usbpath}/product)
+
+		[[ -n ${if_usbmanufacturer} ]] && if_devname="${if_usbmanufacturer} "
+		[[ -n ${if_usbproduct} ]] && if_devname="${if_devname}${if_usbproduct}"
+	fi
+
+	if [[ ${bus} == "ieee1394" ]]
+	then
+		if_devname="IEEE1394 (FireWire) Network Adapter";
+	fi
+
+	echo ${if_devname}
+}
+
+get_ifdesc() {
+	local iface=$1
+	desc=$(get_ifproduct ${iface})
+	if [[ -n ${desc} ]]
+	then
+		echo $desc
+		return;
+	fi
+
+	desc=$(get_ifdriver ${iface})
+	if [[ -n ${desc} ]]
+	then
+		echo $desc
+		return;
+	fi
+
+	desc=$(get_ifmac ${iface})
+	if [[ -n ${desc} ]]
+	then
+		echo $desc
+		return;
+	fi
+
+	echo "Unknown"
+}
+
+show_ifmenu() {
+	local old_ifs="${IFS}"
+	local opts
+	IFS=""
+	for ifname in $(/sbin/ifconfig -a | grep "^[^ ]"); do
+		ifname="${ifname%% *}"
+		[[ ${ifname} == "lo" ]] && continue
+		opts="${opts} '${ifname}' '$(get_ifdesc ${ifname})'"
+	done
+	IFS="${old_ifs}"
+
+	eval dialog --menu \"Please select the interface that you wish to configure from the list below:\" 0 0 0 $opts 2>iface
+	[[ "$?" == "1" ]] && exit
+
+	iface=$(< iface)
+}
+
+show_ifconfirm() {
+	local iface=$1
+	local if_mac=$(get_ifmac ${iface})
+	local if_driver=$(get_ifdriver ${iface})
+	local if_bus=$(get_ifbus ${iface})
+	local if_product=$(get_ifproduct ${iface})
+
+	local text="Details for network interface ${iface} are shown below.\n\nInterface name: ${iface}\n"
+	[[ -n ${if_product} ]] && text="${text}Device: ${if_product}\n"
+	[[ -n ${if_mac} ]] && text="${text}MAC address: ${if_mac}\n"
+	[[ -n ${if_driver} ]] && text="${text}Driver: ${if_driver}\n"
+	[[ -n ${if_bus} ]] && text="${text}Bus type: ${if_bus}\n"
+	text="${text}\nIs this the interface that you wish to configure?"
+
+	if ! dialog --title "Interface details" --yesno "${text}" 15 70
+	then
+		result="no"
+	else
+		result="yes"
+	fi
+}
+
+livecd_console_settings() {
+	# scan for a valid baud rate
+	case "$1" in
+		300*)
+			LIVECD_CONSOLE_BAUD=300
+		;;
+		600*)
+			LIVECD_CONSOLE_BAUD=600
+		;;
+		1200*)
+			LIVECD_CONSOLE_BAUD=1200
+		;;
+		2400*)
+			LIVECD_CONSOLE_BAUD=2400
+		;;
+		4800*)
+			LIVECD_CONSOLE_BAUD=4800
+		;;
+		9600*)
+			LIVECD_CONSOLE_BAUD=9600
+		;;
+		14400*)
+			LIVECD_CONSOLE_BAUD=14400
+		;;
+		19200*)
+			LIVECD_CONSOLE_BAUD=19200
+		;;
+		28800*)
+			LIVECD_CONSOLE_BAUD=28800
+		;;
+		38400*)
+			LIVECD_CONSOLE_BAUD=38400
+		;;
+		57600*)
+			LIVECD_CONSOLE_BAUD=57600
+		;;
+		115200*)
+			LIVECD_CONSOLE_BAUD=115200
+		;;
+	esac
+	if [ "${LIVECD_CONSOLE_BAUD}" = "" ]
+	then
+		# If it's a virtual console, set baud to 38400, if it's a serial
+		# console, set it to 9600 (by default anyhow)
+		case ${LIVECD_CONSOLE} in 
+			tty[0-9])
+				LIVECD_CONSOLE_BAUD=38400
+			;;
+			*)
+				LIVECD_CONSOLE_BAUD=9600
+			;;
+		esac
+	fi
+	export LIVECD_CONSOLE_BAUD
+
+	# scan for a valid parity
+	# If the second to last byte is a [n,e,o] set parity
+	local parity
+	parity=$(livecd_rev_string $1 | cut -b 2-2)
+	case "$parity" in
+		[neo])
+			LIVECD_CONSOLE_PARITY=$parity
+		;;
+	esac
+	export LIVECD_CONSOLE_PARITY	
+
+	# scan for databits
+	# Only set databits if second to last character is parity
+	if [ "${LIVECD_CONSOLE_PARITY}" != "" ]
+	then
+		LIVECD_CONSOLE_DATABITS=$(livecd_rev_string $1 | cut -b 1)
+	fi
+	export LIVECD_CONSOLE_DATABITS
+	return 0
+}
+
+livecd_read_commandline() {
+	livecd_get_cmdline || return 1
+
+	for x in ${CMDLINE}
+	do
+		case "${x}" in
+			cdroot)
+				CDBOOT="yes"
+				RC_NO_UMOUNTS="^(/|/dev|/dev/pts|/lib/rcscripts/init.d|/proc|/proc/.*|/sys|/mnt/livecd|/newroot)$"
+				export CDBOOT RC_NO_UMOUNTS
+			;;
+			cdroot\=*)
+				CDBOOT="yes"
+				RC_NO_UMOUNTS="^(/|/dev|/dev/pts|/lib/rcscripts/init.d|/proc|/proc/.*|/sys|/mnt/livecd|/newroot)$"
+				export CDBOOT RC_NO_UMOUNTS
+			;;
+			console\=*)
+				local live_console
+				live_console=$(livecd_parse_opt "${x}")
+
+				# Parse the console line. No options specified if
+				# no comma
+				LIVECD_CONSOLE=$(echo ${live_console} | cut -f1 -d,)
+				if [ "${LIVECD_CONSOLE}" = "" ]
+				then
+					# no options specified
+					LIVECD_CONSOLE=${live_console}
+				else
+					# there are options, we need to parse them
+					local livecd_console_opts
+					livecd_console_opts=$(echo ${live_console} | cut -f2 -d,)
+					livecd_console_settings  ${livecd_console_opts}
+				fi
+				export LIVECD_CONSOLE
+			;;
+		esac
+	done
+	return 0
+}
+
+livecd_fix_inittab() {
+	if [ "${CDBOOT}" = "" ]
+	then
+		return 1
+	fi
+
+	# Create a backup
+	cp -f /etc/inittab /etc/inittab.old
+
+	# Comment out current getty settings
+	sed -i -e '/^c[0-9]/ s/^/#/' /etc/inittab
+	sed -i -e '/^s[01]/ s/^/#/' /etc/inittab
+
+	# SPARC & HPPA console magic
+	if [ "${HOSTTYPE}" = "sparc" -o "${HOSTTYPE}" = "hppa" -o "${HOSTTYPE}" = "ppc64" ]
+	then
+		# Mount openprom tree for user debugging purposes
+		if [ "${HOSTTYPE}" = "sparc" ]
+		then
+			mount -t openpromfs none /proc/openprom
+		fi
+
+		# SPARC serial port A, HPPA mux / serial
+		if [ -c "/dev/ttyS0" ]
+		then
+			LIVECD_CONSOLE_BAUD=$(stty -F /dev/ttyS0 speed)
+			echo "s0:12345:respawn:/sbin/agetty -nl /bin/bashlogin ${LIVECD_CONSOLE_BAUD} ttyS0 vt100" >> /etc/inittab
+		fi
+		# HPPA software PDC console (K-models)
+		if [ "${LIVECD_CONSOLE}" = "ttyB0" ]
+		then
+			mknod /dev/ttyB0 c 11 0
+			LIVECD_CONSOLE_BAUD=$(stty -F /dev/ttyB0 speed)
+			echo "b0:12345:respawn:/sbin/agetty -nl /bin/bashlogin ${LIVECD_CONSOLE_BAUD} ttyB0 vt100" >> /etc/inittab
+		fi
+		# FB / STI console
+		if [ -c "/dev/vc/1" -o -c "/dev/tts/1" -o -c "/dev/tty2" ]
+		then
+			MODEL_NAME=$(cat /proc/cpuinfo |grep "model name"|sed 's/.*: //')
+			if [ "${MODEL_NAME}" = "UML" ]
+			then
+			    for x in 0 1 2 3 4 5 6
+			    do
+				    echo "c${x}:12345:respawn:/sbin/mingetty --noclear --autologin root tty${x}" >> /etc/inittab
+			    done
+			else
+			    for x in 1 2 3 4 5 6
+			    do
+				    echo "c${x}:12345:respawn:/sbin/mingetty --noclear --autologin root tty${x}" >> /etc/inittab
+			    done
+			fi
+		fi
+		if [ -c "/dev/hvc0" ]
+		then
+			einfo "Adding hvc console to inittab"
+			echo "s0:12345:respawn:/sbin/agetty -nl /bin/bashlogin 9600 hvc0 vt320" >> /etc/inittab
+		fi
+
+
+	# The rest...
+	else
+		for x in 1 2 3 4 5 6
+		do
+			echo "c${x}:12345:respawn:/sbin/agetty -nl /bin/bashlogin 38400 tty${x} linux" >> /etc/inittab
+		done
+	fi
+
+	# EFI-based machines should automatically hook up their console lines
+	if dmesg | grep -q '^Adding console on'
+	then
+		dmesg | grep '^Adding console on' | while read x; do
+			line=`echo "$x" | cut -d' ' -f4`
+			id=e`echo "$line" | grep -o '.\{1,3\}$'`
+			[ "${line}" = "${LIVECD_CONSOLE}" ] && continue  # already setup above
+			case "$x" in
+				*options\ \'[0-9]*) speed=`echo "$x" | sed "s/.*options '//; s/[^0-9].*//"` ;;
+				*) speed=9600 ;;  # choose a default, only matters if it is serial
+			esac
+			echo "$id:12345:respawn:/sbin/agetty -nl /bin/bashlogin ${speed} ${line} vt100" >> /etc/inittab
+		done
+	fi
+
+	# force reread of inittab
+	kill -HUP 1
+	return 0
+}
diff --git a/app-misc/rogentoslive-tools/files/2/livespawn b/app-misc/rogentoslive-tools/files/2/livespawn
new file mode 100644
index 00000000..44d7257e
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/livespawn
@@ -0,0 +1,10 @@
+#!/usr/bin/python
+import sys, os, subprocess
+args = sys.argv[1:]
+if not args: raise SystemExit(1)
+
+pid = os.fork()
+if pid == 0:
+	p = subprocess.Popen(args)
+	rc = p.wait()
+	raise SystemExit(rc)
diff --git a/app-misc/rogentoslive-tools/files/2/logscript.sh b/app-misc/rogentoslive-tools/files/2/logscript.sh
new file mode 100644
index 00000000..78381915
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/logscript.sh
@@ -0,0 +1,111 @@
+#!/bin/sh
+#requires the following
+# free, hostname, grep, cut, awk, uname
+
+HOSTNAME=`hostname -s`
+IP_ADDRS=`ifconfig | grep 'inet addr' | grep -v '255.0.0.0' | cut -f2 -d':' | awk '{print $1}'`
+IP_ADDRS=`echo $IP_ADDRS | sed 's/\n//g'`
+
+#memory
+MEMORY=`free | grep Mem | awk '{print $2}'`
+
+#cpu info
+CPUS=`cat /proc/cpuinfo | grep processor | wc -l | awk '{print $1}'`
+CPU_MHZ=`cat /proc/cpuinfo | grep MHz | tail -n1 | awk '{print $4}'`
+CPU_TYPE=`cat /proc/cpuinfo | grep vendor_id | tail -n 1 | awk '{print $3}'`
+CPU_TYPE2=`uname -m`
+CPU_TYPE3=`uname -p`
+
+OS_NAME=`uname -s`
+OS_OS=`uname -o`
+OS_KERNEL=`uname -r`
+OS_RELEASE=`cat /etc/rogentos-release`
+OS_EDITION=`cat /etc/rogentos-edition`
+ESELECT_KERNEL=`eselect --no-color kernel list`
+ESELECT_OPENGL=`eselect --no-color opengl list`
+ESELECT_JAVA=`eselect --no-color java-vm list`
+ESELECT_JAVAP=`eselect --no-color java-nsplugin list`
+
+EQUO=`equo --version`
+PORTAGE=`emerge --version`
+
+UPTIME=`uptime`
+MEM=`free -t -m`
+SPACE=`df -TH`
+
+PCIINFO=`lspci | cut -f3 -d':'`
+#Another way to do it
+#PCIINFO=`lspci | cut -f3 -d':'`
+
+LSUSB=`lsusb`
+LSMOD=`lsmod`
+#print it out
+echo "$HOSTNAME"
+echo "--------------------------------------------------------------------"
+echo "Hostname         : $HOSTNAME"
+echo "Host Address     : $IP_ADDRS"
+echo "Main Memory      : $MEMORY"
+echo "Number of CPUs   : $CPUS"
+echo "CPU Type         : $CPU_TYPE2 $CPU_TYPE3 $CPU_MHZ MHz"
+echo "OS Release       : $OS_RELEASE"
+echo "OS Edition       : $OS_EDITION"
+echo "Kernel Name      : $OS_NAME $OS_OS"
+echo "Kernel Version   : $OS_KERNEL"
+echo "Uptime           : $UPTIME"
+echo "--------------------------------------------------------------------"
+echo
+echo "Entropy Version"
+echo "$EQUO"
+echo
+echo "Portage Version"
+echo "$PORTAGE"
+echo "--------------------------------------------------------------------"
+echo
+echo "Kernel List"
+echo "$ESELECT_KERNEL"
+echo "Your Kernel Should Be Set To:"
+echo "$OS_KERNEL"
+echo "Use eselect kernel set #"
+echo "--------------------------------------------------------------------"
+echo
+echo "OpenGL List"
+echo "$ESELECT_OPENGL"
+echo "The above should be set to your video card, see lspci"
+echo "Use eselect opengl set #"
+echo "--------------------------------------------------------------------"
+echo
+echo "Java VM List"
+echo "$ESELECT_JAVA"
+echo "Use java-config --set-system-vm #"
+echo "--------------------------------------------------------------------"
+echo
+echo "Java-nsplugin List"
+echo "$ESELECT_JAVAP"
+echo "Use eselect java-nsplugin set #"
+echo "--------------------------------------------------------------------"
+echo
+echo "Devices - lspci"
+echo "--------------------------------------------------------------------"
+echo "$PCIINFO"
+echo "--------------------------------------------------------------------"
+echo
+echo "Devices - lsmod"
+echo "--------------------------------------------------------------------"
+echo "$LSMOD"
+echo "--------------------------------------------------------------------"
+echo
+echo "Devices - lsusb"
+echo "--------------------------------------------------------------------"
+echo "$LSUSB"
+echo "--------------------------------------------------------------------"
+echo
+echo "Memory"
+echo "--------------------------------------------------------------------"
+echo "$MEM"
+echo "--------------------------------------------------------------------"
+echo
+echo "Disk Space"
+echo "--------------------------------------------------------------------"
+echo "$SPACE"
+echo "--------------------------------------------------------------------"
+echo
diff --git a/app-misc/rogentoslive-tools/files/2/net-setup b/app-misc/rogentoslive-tools/files/2/net-setup
new file mode 100644
index 00000000..e84de48b
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/net-setup
@@ -0,0 +1,65 @@
+#!/bin/bash
+# Copyright 1999-2005 Gentoo Foundation
+# Copyright 2006-2008 Fabio Erculiani
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo/src/livecd-tools/net-setup,v 1.19 2006/05/30 20:20:11 wolf31o2 Exp $
+
+if [ -f /sbin/livecd-functions.sh ]
+then
+	source /sbin/livecd-functions.sh
+else
+	echo "ERROR: /sbin/livecd-functions.sh could not be loaded!"
+	exit 1
+fi
+
+if [ ! -x $(which dialog) ]
+then
+	echo "ERROR: The dialog utility is required for net-setup.  Exiting!"
+	exit 1
+fi
+
+livecd_check_root || exit 1
+
+# Hide any potential error messages from the readlink/dirname/etc calls below
+exec 2>/dev/null
+
+if [ -z "${1}" ]
+then
+	show_ifmenu
+	echo $iface
+else
+	iface="${1}"
+fi
+
+[ ! -d /tmp/setup.opts ] && mkdir /tmp/setup.opts
+cd /tmp/setup.opts
+
+while true; do
+	show_ifconfirm $iface
+	[[ $result == "yes" ]] && break
+	show_ifmenu
+done
+
+# Show stderr again
+exec 2>/dev/stderr
+
+dialog --title "Network setup" --menu "This script is designed to setup both wired and wireless network settings.  All questions below apply to the ${iface} interface only.  Choose one option:" 20 60 7 1 "My network is wireless" 2 "My network is wired" 2> ${iface}.WIRED_WIRELESS
+WIRED_WIRELESS=$(tail -n 1 ${iface}.WIRED_WIRELESS)
+case ${WIRED_WIRELESS} in
+	1)
+		livecd_config_wireless
+		livecd_config_ip
+		livecd_write_wireless_conf
+		;;
+	2)
+		livecd_config_ip
+		;;
+	*)
+		exit 0
+		;;
+esac
+livecd_write_net_conf
+
+echo "Type \"ifconfig\" to make sure the interface was configured correctly."
+
+# vim: ts=4
diff --git a/app-misc/rogentoslive-tools/files/2/rogentos-functions.sh b/app-misc/rogentoslive-tools/files/2/rogentos-functions.sh
new file mode 100644
index 00000000..d5584715
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/rogentos-functions.sh
@@ -0,0 +1,284 @@
+#!/bin/bash
+
+GDM_FILE="/usr/share/gdm/defaults.conf"
+CUSTOM_GDM_FILE="/etc/gdm/custom.conf"
+KDM_FILE="/usr/share/config/kdm/kdmrc"
+LXDM_FILE="/etc/lxdm/lxdm.conf"
+LIGHTDM_FILE="/etc/lightdm/lightdm.conf"
+OEM_FILE="/etc/oemlive.sh"
+OEM_FILE_NEW="/etc/oem/liveboot.sh"
+LIVE_USER_GROUPS="audio bumblebee cdrom cdrw clamav console entropy games \
+kvm lp lpadmin messagebus plugdev polkituser portage pulse pulse-access pulse-rt \
+scanner usb users uucp vboxguest vboxusers video wheel"
+LIVE_USER=${ROGENTOS_USER:-rogentosuser}
+
+rogentos_setup_autologin() {
+	# GDM - GNOME
+	if [ -f "${GDM_FILE}" ]; then
+		sed -i "s/^AutomaticLoginEnable=.*/AutomaticLoginEnable=true/" ${GDM_FILE}
+		sed -i "s/^AutomaticLogin=.*/AutomaticLogin=${LIVE_USER}/" ${GDM_FILE}
+
+		sed -i "s/^TimedLoginEnable=.*/TimedLoginEnable=true/" ${GDM_FILE}
+		sed -i "s/^TimedLogin=.*/TimedLogin=${LIVE_USER}/" ${GDM_FILE}
+		sed -i "s/^TimedLoginDelay=.*/TimedLoginDelay=0/" ${GDM_FILE}
+
+	elif [ -f "${CUSTOM_GDM_FILE}" ]; then
+		# FIXME: if this is called multiple times, it generates duplicated entries
+		sed -i "s:\[daemon\]:\[daemon\]\nAutomaticLoginEnable=true\nAutomaticLogin=${LIVE_USER}\nTimedLoginEnable=true\nTimedLogin=${LIVE_USER}\nTimedLoginDelay=0:" \
+			"${CUSTOM_GDM_FILE}"
+		# change other entries there
+		sed -i "s/^TimedLogin=.*/TimedLogin=${LIVE_USER}/" "${CUSTOM_GDM_FILE}"
+		sed -i "s/^AutomaticLogin=.*/AutomaticLogin=${LIVE_USER}/" "${CUSTOM_GDM_FILE}"
+	fi
+
+	# KDM - KDE
+	if [ -f "$KDM_FILE" ]; then
+		sed -i "s/AutoLoginEnable=.*/AutoLoginEnable=true/" $KDM_FILE
+		sed -i "s/AutoLoginUser=.*/AutoLoginUser=${LIVE_USER}/" $KDM_FILE
+		sed -i "s/AutoLoginDelay=.*/AutoLoginDelay=0/" $KDM_FILE
+		sed -i "s/AutoLoginAgain=.*/AutoLoginAgain=true/" $KDM_FILE
+
+		sed -i "s/AllowRootLogin=.*/AllowRootLogin=true/" $KDM_FILE
+		sed -i "s/AllowNullPasswd=.*/AllowNullPasswd=true/" $KDM_FILE
+		sed -i "s/AllowShutdown=.*/AllowShutdown=All/" $KDM_FILE
+
+		sed -i "/^#.*AutoLoginEnable=/ s/^#//" $KDM_FILE
+		sed -i "/^#.*AutoLoginUser=/ s/^#//" $KDM_FILE
+		sed -i "/^#.*AutoLoginDelay=/ s/^#//" $KDM_FILE
+		sed -i "/^#.*AutoLoginAgain=/ s/^#//" $KDM_FILE
+
+		sed -i "/^#AllowRootLogin=/ s/^#//" $KDM_FILE
+		sed -i "/^#AllowNullPasswd=/ s/^#//" $KDM_FILE
+		sed -i "/^#AllowShutdown=/ s/^#//" $KDM_FILE
+	fi
+
+	# LXDM
+	if [ -f "$LXDM_FILE" ]; then
+		sed -i "s/autologin=.*/autologin=${LIVE_USER}/" $LXDM_FILE
+		sed -i "/^#.*autologin=/ s/^#//" $LXDM_FILE
+	fi
+
+	# LightDM
+	if [ -f "$LIGHTDM_FILE" ]; then
+		sed -i "s/autologin-user=.*/autologin-user=${LIVE_USER}/" $LIGHTDM_FILE
+		sed -i "/^#.*autologin-user=/ s/^#//" $LIGHTDM_FILE
+	fi
+
+	# Setup correct login session
+	rogentos_is_normal_boot && rogentos_fixup_gnome_autologin_session
+}
+
+rogentos_disable_autologin() {
+	# GDM - GNOME
+	if [ -f "${GDM_FILE}" ]; then
+		sed -i "s/^AutomaticLoginEnable=.*/AutomaticLoginEnable=false/" ${GDM_FILE}
+	fi
+
+	# KDM - KDE
+	KDM_FILE="/usr/share/config/kdm/kdmrc"
+	if [ -f "$KDM_FILE" ]; then
+		sed -i "s/AutoLoginEnable=.*/AutoLoginEnable=false/" $KDM_FILE
+	fi
+
+	# LXDM
+	if [ -f "$LXDM_FILE" ]; then
+		sed -i "s/^autologin=.*/autologin=/" $LXDM_FILE
+	fi
+
+	# LightDM
+	if [ -f "$LIGHTDM_FILE" ]; then
+		sed -i "s/^autologin-user=.*/#autologin-user=/" $LIGHTDM_FILE
+	fi
+}
+
+rogentos_setup_live_user() {
+	local live_user="${1}"
+	local live_uid="${2}"
+	if [ -z "${live_user}" ]; then
+		live_user="${LIVE_USER}"
+	fi
+	if [ -n "${live_uid}" ]; then
+		live_uid="-u ${live_uid}"
+	fi
+	id ${live_user} &> /dev/null
+	if [ "${?}" != "0" ]; then
+		local live_groups=""
+		local avail_groups=$(cat /etc/group | cut -d":" -f 1 | xargs echo)
+		for a_group in ${avail_groups}; do
+			for p_group in ${LIVE_USER_GROUPS}; do
+				if [ "${p_group}" = "${a_group}" ]; then
+					if [ -z "${live_groups}" ]; then
+						live_groups="${p_group}"
+					else
+						live_groups="${live_groups},${p_group}"
+					fi
+				fi
+			done
+		done
+		# then setup live user, that is missing
+		useradd -d "/home/${live_user}" -g root -G ${live_groups} -c "rogentosuser" \
+			-m -N -p "" -s /bin/bash ${live_uid} "${live_user}"
+		return 0
+	fi
+	return 1
+}
+
+rogentos_setup_motd() {
+	echo -e "\n\tWelcome to `cat /etc/rogentos-edition`\n\t`uname -p`\n\t`uname -o` `uname -r`\n" > /etc/motd
+}
+
+rogentos_setup_vt_autologin() {
+	if openrc_running; then
+		. /sbin/livecd-functions.sh
+		export CDBOOT=1
+		livecd_fix_inittab
+	elif systemd_running; then
+		cp /usr/lib/systemd/system/getty@.service \
+			/etc/systemd/system/autologin@.service
+		sed -i "/^ExecStart=/ s:/sbin/agetty:/sbin/agetty --autologin root:g" \
+			/usr/lib/systemd/system/getty@.service
+		sed -i "/^ExecStart=/ s:--noclear::g" \
+			/usr/lib/systemd/system/getty@.service
+		systemctl daemon-reload
+		systemctl restart getty@tty1
+	fi
+}
+
+rogentos_setup_oem_livecd() {
+	if [ -x "${OEM_LIVE_NEW}" ]; then
+		${OEM_FILE_NEW} || return 1
+	elif [ -x "${OEM_LIVE}" ]; then
+		${OEM_FILE} || return 1
+	fi
+	return 0
+}
+
+rogentos_is_live() {
+	local cmdl=$(cat /proc/cmdline | grep cdroot)
+	if [ -n "${cmdl}" ]; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+rogentos_setup_gui_installer() {
+	# Configure Fluxbox
+	local dmrc_file="/home/${LIVE_USER}/.dmrc"
+	local flux_dir="/home/${LIVE_USER}/.fluxbox"
+	local flux_startup_file="${flux_dir}/startup"
+	if [ ! -d "${flux_dir}" ]; then
+		mkdir "${flux_dir}" && chown "${LIVE_USER}" "${flux_dir}"
+	fi
+	echo "[Desktop]" > "${dmrc_file}"
+	echo "Session=fluxbox" >> "${dmrc_file}"
+	chown rogentosuser "${dmrc_file}"
+	sed -i "/installer --fullscreen/ s/^# //" "${flux_startup_file}"
+	if [ -x "/usr/libexec/gdm-set-default-session" ]; then
+		# oh my fucking glorious god, this
+		# is AccountsService bullshit
+		# cross fingers
+		/usr/libexec/gdm-set-default-session fluxbox
+	fi
+	if [ -x "/usr/libexec/gdm-set-session" ]; then
+		# GDM 3.6 support
+		/usr/libexec/gdm-set-session rogentosuser fluxbox
+	fi
+}
+
+# This function reads /etc/skel/.dmrc and properly
+# set the Session= value inside AccountsService.
+# Blame the idiots who broke de-facto standards
+# and created this fugly thing called AccountsService
+rogentos_fixup_gnome_autologin_session() {
+	local cur_session=
+
+	if [ -f "/etc/skel/.dmrc" ]; then
+		cur_session=$(cat /etc/skel/.dmrc | grep ^Session | cut -d"=" -f 2)
+	fi
+	if [ -z "${cur_session}" ]; then
+		return 0
+	fi
+
+	local sess_file="/usr/share/xsessions/${cur_session}.desktop"
+	if [ ! -f "${sess_file}" ]; then
+		return 0
+	fi
+
+	if [ -x "/usr/libexec/gdm-set-default-session" ]; then
+		# this edits /etc/gdm/custom.conf adding [daemon]\nDefaultSession=${cur_session}
+		/usr/libexec/gdm-set-default-session "${cur_session}"
+	fi
+
+	if [ -x "/usr/libexec/gdm-set-session" ]; then
+		# GDM 3.6 support
+		local users_in_users=$(cat /etc/group | grep "^users" | awk -F':' '{ print $4 }' | sed "s:,: :g")
+		for usr in ${users_in_users}; do
+			/usr/libexec/gdm-set-session "${usr}" "${cur_session}"
+		done
+	fi
+}
+
+rogentos_setup_text_installer() {
+	if openrc_running; then
+		# switch to verbose mode
+		splash_manager -c set -t default -m v &> /dev/null
+		reset
+		chvt 1
+		clear
+	fi
+	rogentos_setup_text_installer_motd
+}
+
+rogentos_setup_text_installer_motd() {
+	echo "Welcome to RogentOS Linux Text installation." >> /etc/motd
+	echo "to run the installation type: installer <and PRESS ENTER>" >> /etc/motd
+}
+
+rogentos_is_text_install() {
+	local _is_install=$(cat /proc/cmdline | grep installer-text)
+	if [ -n "${_is_install}" ]; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+rogentos_is_gui_install() {
+	local _is_install=$(cat /proc/cmdline | grep installer-gui)
+	if [ -n "${_is_install}" ]; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+rogentos_is_live_install() {
+	( rogentos_is_text_install || rogentos_is_gui_install ) && return 0
+	return 1
+}
+
+rogentos_is_mce() {
+	local _is_mce=$(cat /proc/cmdline | grep sabayonmce)
+	if [ -n "${_is_mce}" ]; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+rogentos_is_normal_boot() {
+	if ! rogentos_is_mce && ! rogentos_is_live_install; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+systemd_running() {
+	test -d /run/systemd/system
+}
+
+openrc_running() {
+	test -e /run/openrc/softlevel
+}
diff --git a/app-misc/rogentoslive-tools/files/2/rogentos-live-check b/app-misc/rogentoslive-tools/files/2/rogentos-live-check
new file mode 100644
index 00000000..5ad3d509
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/rogentos-live-check
@@ -0,0 +1,27 @@
+#!/bin/sh
+#
+# rogentos_livechk.sh
+#
+# Checks the integrity of a LiveCD/DVD by passing the
+# contents of the image through a md5sum (to be compared
+# with an documented value elsewhere).
+#
+
+if ( ! isoinfo -d -i /dev/cdrom >>/dev/null 2>/dev/null ); then
+       echo "CDROM/DVD image not found!"
+       exit 1
+fi
+
+echo -e "Checking image integrity, please allow several minutes...\n"
+echo "You can check for errors by running 'tail /var/log/messages'"
+echo "in another console window.  If you encounter multiple device"
+echo "errors with you cdrom, this probably indicates the test is failing."
+echo "You may type 'Ctrl-c' to abort the check."
+
+BLOCK_SIZE=`isoinfo -d -i /dev/cdrom | grep "Logical block size is" | cut -d: -f2 | sed 's/^[ ]//g'`
+VOL_SIZE=`isoinfo -d -i /dev/cdrom | grep "Volume size is" | cut -d: -f2 | sed 's/^[ ]//g'`
+dd if=/dev/cdrom bs=$BLOCK_SIZE count=$VOL_SIZE conv=notrunc,noerror | md5sum
+
+echo "Compare the above value with the value supplied in"
+echo "the release notes for this version at:"
+echo "http://www.rogentos.org/"
diff --git a/app-misc/rogentoslive-tools/files/2/rogentos-welcome-loader b/app-misc/rogentoslive-tools/files/2/rogentos-welcome-loader
new file mode 100644
index 00000000..8b0cf007
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/rogentos-welcome-loader
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+SABAYON_LOADER="/usr/bin/xdg-open"
+SABAYON_URL=${SABAYON_URL:-http://www.rogentos.org?install_welcome=1}
+
+# load Sabayon URL
+[[ -x "${SABAYON_LOADER}" ]] && ${SABAYON_LOADER} ${SABAYON_URL} &
+
+# remove myself from autostart
+rm ~/.config/autostart/rogentos-welcome-loader.desktop -f
diff --git a/app-misc/rogentoslive-tools/files/2/rogentos-welcome-loader.desktop b/app-misc/rogentoslive-tools/files/2/rogentos-welcome-loader.desktop
new file mode 100644
index 00000000..15679628
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/rogentos-welcome-loader.desktop
@@ -0,0 +1,7 @@
+[Desktop Entry]
+Type=Application
+Name=rogentos-loader
+Exec=rogentos-welcome-loader
+Icon=system-run
+Comment=Sabayon Linux post-install Welcome Screen
+Terminal=false
diff --git a/app-misc/rogentoslive-tools/files/2/rogentoslive b/app-misc/rogentoslive-tools/files/2/rogentoslive
new file mode 100644
index 00000000..ee1c5541
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/rogentoslive
@@ -0,0 +1,14 @@
+#!/sbin/runscript
+# Copyright 2004-2013 Sabayon
+# Distributed under the terms of the GNU General Public License v2
+
+depend() {
+	after x-setup
+	before xdm
+}
+
+start() {
+	ebegin "Preparing Live system..."
+	/usr/libexec/rogentoslive.sh
+	eend $?
+}
diff --git a/app-misc/rogentoslive-tools/files/2/rogentoslive.service b/app-misc/rogentoslive-tools/files/2/rogentoslive.service
new file mode 100644
index 00000000..92b8455e
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/rogentoslive.service
@@ -0,0 +1,11 @@
+[Unit]
+Description=Sabayon live system setup
+Before=display-manager.service getty.target
+
+[Service]
+Type=oneshot
+RemainAfterExit=true
+ExecStart=/usr/libexec/rogentoslive.sh
+
+[Install]
+WantedBy=multi-user.target
diff --git a/app-misc/rogentoslive-tools/files/2/rogentoslive.sh b/app-misc/rogentoslive-tools/files/2/rogentoslive.sh
new file mode 100644
index 00000000..3b5def3d
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/rogentoslive.sh
@@ -0,0 +1,183 @@
+#!/bin/bash
+
+. /sbin/rogentos-functions.sh
+
+CMDLINE=$(cat /proc/cmdline 2> /dev/null)
+
+setup_password() {
+    local cmdline_autoscramble_exist=$(echo ${CMDLINE} | grep autoscramble)
+    if [ -n "${cmdline_autoscramble_exist}" ]; then
+        echo "Autoscrambling root and live user passwords"
+        echo root:\`pwgen -s 16\` | chpasswd  > /dev/null 2>&1
+        echo ${LIVE_USER}:\`pwgen -s 16\` | chpasswd  > /dev/null 2>&1
+    fi
+}
+
+setup_x() {
+    if systemd_running; then
+        [ -x /sbin/gpu-configuration ] && /sbin/gpu-configuration
+    else
+        while [ -e "/etc/x-setup-configuration-running" ]; do
+            sleep 1
+        done
+    fi
+}
+
+setup_settingsd() {
+    if [ -e /usr/share/eselect/modules/settingsd.eselect ]; then
+        if systemd_running; then
+            eselect settingsd set systemd > /dev/null
+        elif openrc_running; then
+            eselect settingsd set openrc > /dev/null
+        fi
+    fi
+}
+
+setup_desktop() {
+    # create LIVE_USER if it does not exist
+    rogentos_setup_live_user "${LIVE_USER}" "1000"
+    if [ "${?}" = "1" ]; then
+        # if user is already available, then setup skel
+        # Copy ${LIVE_USER} directory
+        rm -rf /home/${LIVE_USER}
+        cp /etc/skel /home/${LIVE_USER} -Rp
+        chown ${LIVE_USER}:users /home/${LIVE_USER} -R
+    fi
+
+    local liveinst_desktop="/usr/share/applications/liveinst.desktop"
+    local liveinst_desktop_name="$(basename ${liveinst_desktop})"
+    if [ -f "${liveinst_desktop}" ]; then
+        [[ -d "/home/${LIVE_USER}/Desktop" ]] || \
+            mkdir -p "/home/${LIVE_USER}/Desktop"
+        cp "${liveinst_desktop}" "/home/${LIVE_USER}/Desktop"
+        chown ${LIVE_USER}:users "/home/${LIVE_USER}/Desktop" -R
+        chmod +x "/home/${LIVE_USER}/Desktop/${liveinst_desktop_name}"
+        rm -f /etc/skel/Desktop/Anaconda*.desktop \
+            /home/${LIVE_USER}/Desktop/Anaconda*.desktop
+    fi
+
+    # Disable memory eating services
+    rm -f /etc/xdg/autostart/hplip-systray.desktop \
+        /etc/xdg/autostart/beagle-search-autostart.desktop \
+        /etc/xdg/autostart/tracker*.desktop \
+        /etc/xdg/autostart/magneto.desktop \
+        /etc/xdg/autostart/beagled-autostart.desktop \
+        /usr/share/autostart/magneto.desktop \
+        /usr/share/autostart/nepomukserver.desktop
+
+    # Remove broken entries in /etc/mtab
+    if [ ! -L /etc/mtab ]; then
+        sed -i '/.*newroot.*/d' /etc/mtab
+    fi
+
+    # create /overlay, this way df -h won't bitch
+    [[ -d "/overlay" ]] || mkdir /overlay
+
+    return 0
+}
+
+setup_keymap() {
+    local keymap_toset=
+    local keymap_toset_model=
+
+    for word in ${CMDLINE}; do
+        case ${word} in
+            console-setup/layoutcode=*)
+                keymap_toset="${word/*=}"
+                ;;
+            console-setup/modelcode=*)
+                keymap_toset_model="-${word/*=}"
+                ;;
+            KEYMAP=*)
+                keymap_toset="${word/*=}"
+                ;;
+            keymap=*)
+                keymap_toset="${word/*=}"
+                ;;
+            vconsole.keymap=*)
+                keymap_toset="${word/*=}"
+                ;;
+            vconsole.keymap.model=*)
+                keymap_toset_model="-${word/*=}"
+                ;;
+        esac
+    done
+
+    if [ -n "${keymap_toset}" ]; then
+        aggregated_keymap="${keymap_toset}${keymap_toset_model}"
+        /sbin/keyboard-setup-2 "${aggregated_keymap}" all &> /dev/null
+        if [ "${?}" = "0" ]; then
+            openrc_running && /etc/init.d/keymaps restart --nodeps
+            # systemd not needed here, this script runs before vconsole-setup
+        fi
+    fi
+}
+
+setup_locale() {
+    for word in ${CMDLINE}; do
+        case ${word} in
+            locale=*)
+                lang_toset="${word/*=}"
+                ;;
+            LANG=*)
+                lang_toset="${word/*=}"
+                ;;
+            lang=*)
+                lang_toset="${word/*=}"
+                ;;
+        esac
+    done
+    if [ -n "${lang_toset}" ]; then
+        files=(
+            "/etc/env.d/02locale"
+            "/etc/locale.conf"
+        )
+        for path in "${files[@]}"; do
+            if [ -e "$path" ]; then
+                sed -i "s/^LC_ALL=.*/LC_ALL=${lang_toset}.UTF-8/g" \
+                    "${path}"
+                sed -i "s/^LANG=.*/LANG=${lang_toset}.UTF-8/g" "${path}"
+                sed -i "s/^LANGUAGE=.*/LANGUAGE=${lang_toset}.UTF-8/g" \
+                    "${path}"
+            else
+                echo "LC_ALL=${lang_toset}.UTF-8" > "${path}"
+                echo "LANG=${lang_toset}.UTF-8" >> "${path}"
+                echo "LANGUAGE=${lang_toset}.UTF-8" >> "${path}"
+            fi
+        done
+
+        sed -i "s/^export LC_ALL=.*/export LC_ALL=${lang_toset}.UTF-8/g" \
+            "/etc/profile.env"
+        sed -i "s/^export LANG=.*/export LANG=${lang_toset}.UTF-8/g" \
+            "/etc/profile.env"
+        sed -i "s/^export LANGUAGE=.*/export LANGUAGE=${lang_toset}.UTF-8/g" \
+            "/etc/profile.env"
+
+    fi
+}
+
+
+main() {
+    . /sbin/rogentos-functions.sh
+
+    # Perform configuration only in live mode
+    if ! rogentos_is_live; then
+        echo "Skipping Live system configuration"
+        return 0
+    fi
+
+    setup_settingsd
+    setup_desktop
+    setup_password
+    setup_keymap
+    setup_x
+    # MOVED HERE TO AVOID RACE CONDITIONS ON WRITING
+    # /etc/profile.env variables
+    setup_locale
+    rogentos_setup_autologin
+    rogentos_setup_motd
+    rogentos_setup_vt_autologin
+    rogentos_setup_oem_livecd
+}
+
+main
diff --git a/app-misc/rogentoslive-tools/files/2/sabutil b/app-misc/rogentoslive-tools/files/2/sabutil
new file mode 100644
index 00000000..1787c59d
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/sabutil
@@ -0,0 +1,667 @@
+#!/bin/bash
+
+# Initial version by wolfden.
+# Later changes by Enlik <poczta-sn at gazeta.pl>.
+
+# last change: 9.03.2012
+# most important changes to last version:
+# - abort if non root where needs root permissions
+# - fix fdisk -l pasting
+# - support for xorg.conf.d
+# - reorder options and add rcupdate_pastebin
+
+USER=$(whoami)
+HOMEDIR=${HOME:-/tmp}
+
+function menu
+{
+    local selection=""
+    until  [[ "$selection" = "0" ]] ; do
+        echo "Current Operating System:"
+	cat /etc/rogentos-release
+	echo ""
+        echo "Current Edition:"
+	cat /etc/rogentos-edition
+        echo
+        echo "Pick a choice from menu below:"
+
+        echo ""
+        echo "1 - Backup & edit xorg.conf and xorg.conf.d"
+        echo "2 - Restore xorg.conf and xorg.conf.d from backup"
+        echo "3 - Regenerate Sabayon xorg.conf"
+        echo "4 - Backup & edit grub.cfg"
+        echo "5 - Restore grub.cfg from backup"
+        echo "----------------------------------------"
+        echo "View and AutoPaste:"
+        echo " "
+        echo "01 - Pastebin Xorg configuration files"
+        echo "02 - Pastebin Xorg.0.log"
+        echo "03 - Pastebin ~/.xsession-errors"
+        echo "04 - Pastebin grub.cfg (bootmanager settings)"
+        echo "05 - Pastebin /var/log/dmesg"
+        echo "06 - Pastebin system and hardware info"
+        echo "07 - Pastebin fdisk -l (list the partition tables)"
+        echo "08 - Pastebin rc-update show (show enabled services and the runlevels)"
+        echo "09 - Pastebin rc.log"
+        echo "10 - Pastebin /var/log/messages"
+        echo "11 - Pastebin kdm.log"
+        echo ""
+        echo "0 - Exit"
+        echo ""
+        echo -n "Enter selection: "
+        read selection
+        echo ""
+
+        case $selection in
+            1 ) xorg_backup ; press_enter ; xorg_edit; press_enter ;;
+            2 ) xorg_restore ; press_enter ;;
+            3 ) xorg_regen ; press_enter ;;
+            4 ) grub_backup ; press_enter ; nano -w /boot/grub/grub.cfg; press_enter ;;
+            5 ) grub_restore ; press_enter ;;
+            01 ) xorg_pastebin ; press_enter ;;
+            02 ) xorg0log_pastebin ; press_enter ;;
+            03 ) xsessionerrors_pastebin ; press_enter ;;
+            04 ) grub_pastebin ; press_enter ;;
+            05 ) dmesg_pastebin ; press_enter ;;
+            06 ) system_pastebin ; press_enter ;;
+            07 ) fdisk_pastebin ; press_enter ;;
+            08 ) rcupdate_pastebin ; press_enter ;;
+            09 ) rclog_pastebin ; press_enter ;;
+            10 ) messages_pastebin ; press_enter ;;
+            11 ) kdm_pastebin ; press_enter ;;
+
+            0 ) ;;
+            * ) echo "Please be sensible - choose a number that exists in the menu"; press_enter
+        esac
+    done
+
+}
+
+function press_enter
+{
+    echo ""
+    echo -n "Press Enter to continue"
+    read
+    clear
+}
+
+function is_root
+{
+    if [[ $USER != "root" ]]; then
+        echo "You need to be root to do this." >&2
+        return 1
+    fi
+    return 0
+}
+
+function xorg_regen
+{
+    is_root || return
+
+    if [[ ! -f "/etc/X11/xorg.conf.rogentos" ]]; then
+        cat > /etc/X11/xorg.conf.rogentos <<EOF
+Section "Module"
+    SubSection  "extmod"
+       Option    "omit xfree86-dga"
+    EndSubSection
+    Load        "i2c"
+    Load        "ddc"
+    Load        "synaptics"
+    Load        "vbe"
+#   Load        "dri"
+EndSection
+
+
+Section "ServerFlags"
+     Option     "AllowMouseOpenFail" "true"
+EndSection
+
+Section "InputDevice"
+    Identifier          "Synaptics1"
+    Driver              "synaptics"
+    Option              "SendCoreEvents"        "true"
+    Option              "Device"                "/dev/psaux"
+    Option              "Protocol"              "auto-dev"
+    Option              "HorizScrollDelta"      "0"
+    Option              "SHMConfig"             "on"
+    # For ALPS/MacBook TouchPads
+    #Option             "MaxSpeed"              "0.7"
+    #Option             "MinSpeed"              "0.18"
+    #Option             "AccelFactor"           "0.08"
+    #Option             "TopEdge"               "120"
+    #Option             "LeftEdge"              "120"
+    #Option             "BottomEdge"            "830"
+    #Option             "RightEdge"             "650"
+    #Option             "FingerLow"             "25"
+    #Option             "FingerHigh"            "30"
+    # MacBook touchpad
+    #Option             "MaxTapTime"            "180"
+    #Option             "MaxTapMove"            "220"
+    #Option             "MaxDoubleTapTime"      "180"
+    #Option             "VertScrollDelta"       "20"
+    #Option             "HorizScrollDelta"      "50"
+    #Option             "TapButton2"            "3"
+    #Option             "TapButton3"            "2"
+    #Option             "VertTwoFingerScroll"   "1"
+
+    # Do you keep moving the mouse while typing? Try this trick.
+    #synclient TouchpadOff=1 disable your synaptics touchpad
+    #synclient TouchpadOff=0 enable your synaptics touchpad
+EndSection
+
+
+# **********************************************************************
+# Monitor section
+# **********************************************************************
+
+# Any number of monitor sections may be present
+
+Section "Monitor"
+    Identifier  "Generic Monitor"
+    VertRefresh 43 - 60
+    HorizSync   28 - 80
+EndSection
+
+# **********************************************************************
+# Graphics device section
+# **********************************************************************
+
+# Any number of graphics device sections may be present
+
+Section "Device"
+    Identifier  "VESA"
+    Driver      "vesa" # do not remove vesa
+    #Option "RenderAccel" "on"
+    #Option "XAANoOffscreenPixmaps"
+    #Option "BusType" "PCI"
+    #Option "ColorTiling" "on"
+    #Option "EnablePageFlip" "on"
+    # UseEvents is causing segmentation faults with
+    # NVIDIA 6xxx, 7xxx and >=275.xx.xx drivers
+    #Option "UseEvents" "True"
+EndSection
+
+
+# **********************************************************************
+# Screen sections.
+# **********************************************************************
+
+Section "Screen"
+
+# The Identifier, Device and Monitor lines must be present
+
+    Identifier  "Screen 1"
+    Device      "VESA"
+    Monitor     "Generic Monitor"
+    #Option "AddARGBGLXVisuals" "true"
+
+# The favoured Depth and/or Bpp may be specified here
+
+    DefaultDepth 24
+
+    SubSection "Display"
+        Depth           8
+        ViewPort        0 0
+        #Modes          "1024x768" "800x600" "640x480"
+    EndSubsection
+
+    SubSection "Display"
+        Depth           16
+        ViewPort        0 0
+        #Modes          "1024x768" "800x600" "640x480"
+    EndSubsection
+
+    SubSection "Display"
+        Depth           24
+        ViewPort        0 0
+        #Modes          "1024x768" "800x600" "640x480"
+    EndSubsection
+
+
+EndSection
+
+
+Section "ServerLayout"
+# The Identifier line must be present
+
+    Identifier  "Main Layout"
+    Screen 0    "Screen 1"
+    InputDevice "Mouse1" "CorePointer"
+    #InputDevice "Synaptics1" "SendCoreEvents"
+
+EndSection
+
+Section "DRI"
+    Mode 0666
+EndSection
+
+Section "Extensions"
+   #Option "Composite" "Enable"
+EndSection
+EOF
+    fi
+
+    mv -f /etc/X11/xorg.conf /etc/X11/xorg.conf.old
+    /usr/sbin/x-setup-configuration
+
+    echo "Note: you may want to look to /etc/X11/xorg.conf.d (if it exists), too."
+}
+
+function xorg_backup
+{
+    is_root || return
+
+    if [[ -f /etc/X11/xorg.conf.BKUP ]]; then
+        echo "/etc/X11/xorg.conf.BKUP already exists, so new backup wasn't made - aborting."
+        echo "Now off we go to edit the file...."
+        return
+    elif [[ -e /etc/X11/xorg.conf.d.BKUP ]]; then
+        echo "/etc/X11/xorg.conf.d.BKUP backup already exists, so new backup wasn't made - aborting."
+        return
+    fi
+
+    # Delete backup file. If there's no xorg.conf, no stale xorg.conf.BKUP will be kept.
+    # So xorg_restore will not made new (unexpected) xorg.conf from xorg.conf.BKUP.
+    rm -f /etc/X11/xorg.conf.BKUP
+    if [[ -f /etc/X11/xorg.conf ]]; then
+	echo "Making backup of xorg.conf as /etc/X11/xorg.conf.BKUP"
+	cp /etc/X11/xorg.conf /etc/X11/xorg.conf.BKUP
+    else
+	echo "There's no /etc/X11/xorg.conf so it couldn't be backed up."
+    fi
+
+    if [[ -e /etc/X11/xorg.conf.d ]]; then
+	echo "Making backup of /etc/X11/xorg.conf.d/*"
+	if [[ ! -d /etc/X11/xorg.conf.d ]]; then
+	    echo "!!!"
+	    echo "/etc/X11/xorg.conf.d is not a directory!"
+	    return
+	fi
+        mkdir -p /etc/X11/xorg.conf.d.BKUP
+        rm -f /etc/X11/xorg.conf.d.BKUP/* # dotfiles and subdirectories (who keeps them there?!) are left untouched
+        cp /etc/X11/xorg.conf.d/* /etc/X11/xorg.conf.d.BKUP/ # and not copied (that's fine)
+        echo "/etc/X11/xorg.conf.d/* files are backed up in /etc/X11/xorg.conf.d.BKUP/"
+    else
+	echo "There's no /etc/X11/xorg.conf.d (directory) so it couldn't be backed up."
+    fi
+
+    echo ""
+    echo "INTEL graphics users please read the url below before proceding"
+    echo ""
+    echo "http://gentoo-wiki.com/HOWTO_Intel_Onboard_Graphics_Notebooks_Native_Resolution"
+}
+
+function xorg_restore
+{
+    is_root || return
+
+    echo "Are you sure? This will replace your /etc/X11/xorg.conf and /etc/X11/xorg.conf.d/*.conf."
+    echo "[Y/n]"
+    local reply
+    read reply
+    if [[ $reply != "" && $reply != "y" && $reply != "Y" ]]; then
+        echo "OK, aborting."
+        return
+    fi
+
+    if [[ -f /etc/X11/xorg.conf.BKUP ]]; then
+        echo "xorg.conf backup (/etc/X11/xorg.conf.BKUP) exists, whew!"
+        cp /etc/X11/xorg.conf.BKUP /etc/X11/xorg.conf
+        echo ""
+        echo "The original xorg.conf has been restored"
+    else
+        echo "UH OH!! The backup /etc/X11/xorg.conf.BKUP hasn't been made."
+        echo "If you think you need the file, don't panic, you can copy it from the Live DVD/CD."
+    fi
+
+    echo ""
+
+    if [[ -d /etc/X11/xorg.conf.d.BKUP ]] \
+	&& (shopt -s nullglob; f=(/etc/X11/xorg.conf.d.BKUP/*.conf); [[ ${#f[*]} -ne 0 ]] )
+    then
+        echo "The backup /etc/X11/xorg.conf.d.BKUP (directory) exists and contails .conf files."
+        mkdir -p /etc/X11/xorg.conf.d
+	# similar notes as for xorg_backup, but files like .disabled are not removed
+        rm -f /etc/X11/xorg.conf.d/*.conf
+        cp /etc/X11/xorg.conf.d.BKUP/* /etc/X11/xorg.conf.d/
+        echo "Your settings are now restored to /etc/X11/xorg.conf.d/."
+    fi
+}
+
+function grub_backup
+{
+    is_root || return
+
+    echo "Note: to modify GRUB configuration, you should edit /etc/default/grub"
+    echo " or a file in /etc/grub.d and then run grub-mkconfig -o /boot/grub/grub.cfg"
+    echo " (/boot/grub/grub.cfg shouldn't be edited by hand)."
+    echo ""
+
+    if [[ -f /boot/grub/grub.cfg.BKUP ]]; then
+        echo "grub.cfg backup already exists, so the new one wasn't made."
+        echo "Now off we go to edit the file...."
+    else
+	echo "Making backup of grub.cfg as /boot/grub/grub.cfg.BKUP"
+        cp /boot/grub/grub.cfg /boot/grub/grub.cfg.BKUP
+        echo ""
+    fi
+}
+
+function grub_restore
+{
+    is_root || return
+
+    echo "Are you sure? This will replace your /boot/grub/grub.cfg."
+    echo "[Y/n]"
+    local reply
+    read reply
+    if [[ $reply != "" && $reply != "y" && $reply != "Y" ]]; then
+        echo "OK, aborting."
+        return
+    fi
+
+    if [[ -f /boot/grub/grub.cfg.BKUP ]]
+    then
+        echo "grub.cfg backup (/boot/grub/grub.cfg.BKUP) exists, whew!"
+        cp /boot/grub/grub.cfg.BKUP /boot/grub/grub.cfg
+        echo ""
+        echo "The original grub.cfg has been restored"
+    else
+        echo "UH OH!! The backup script /boot/grub/grub.cfg.BKUP hasn't been made."
+        echo "Don't panic, you can use the Sabayon installer to repair GRUB."
+    fi
+}
+
+function horner
+{
+
+# Quick system info gatherer written for Sabayon GNU/Linux
+#(http://rogentoslinux.org)
+# Copyright 2008 Richard Edward Horner
+# Last modified 2008-11-26
+# Please send all comments, suggestions, bugs and patches to (rich AT
+#richhorner DOT com)
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+HOSTNAME=`hostname`
+RELEASE=`cat /etc/rogentos-release`
+CPU=`uname -p`
+KERNEL=`uname -r`
+KERN_ARCH=`uname -m`
+DISK=`df -lT --exclude-type=tmpfs --exclude-type=rootfs | awk 'BEGIN { total = 0; used = 0 } { if (NR > 1) { total += $3; used += $4 } } END { printf "%.1f/%.1fGB", used / 1000000, total / 1000000 }'`
+MEMORY=`cat /proc/meminfo | awk '{ if ($1 == "MemTotal:") { memtot = $2/1000 } else if ($1 == "MemFree:") { memfree = $2/1000 } } END { printf "%d/%dM", memfree, memtot }'`
+DAYS=`cat /proc/uptime | awk '{ printf "%.1f", $1/86400 }'`
+PROCS=`ps aux | awk 'END { print NR - 2 }'`
+RENDERER=`glxinfo | awk -F : '{ if ($1 == "OpenGL renderer string") print $2 }'`
+
+echo "Sysinfo for '$HOSTNAME': $RELEASE with $KERN_ARCH kernel $KERNEL
+on $CPU, HD: $DISK, MEM: $MEMORY, Renderer: $RENDERER, $PROCS procs,
+up $DAYS days"
+
+}
+
+# echo -e "\a[pastebunz debug ON]" >&2;
+# function pastebunz { sed 's/^/[pb] '/ | less; }
+
+# pastebunz seems to have some limit on max pasted lines, so this would be handy...
+function files_pastebin_linelimit
+{
+    # args: limit file_to_pastebin [file_to_pastebin] ...
+    # example: file_pastebin_linelimit 30 file1 "file name2" file3
+    # first arg: 0 means no limit
+    # By Enlik <sn at ubucentrum.net>
+    local TMPFILE=~/newbietmp
+    local LINESLIMIT
+    local LLIMIT_H
+
+    if [[ $# -le 1 ]]; then
+        echo "Error: no files to paste (in files_pastebin_linelimit)." >&2
+        return 2
+    fi
+
+    let LINESLIMIT=$1
+    shift
+    # If there is a limit of lines, we need to make space for file name and blank
+    # lines to be pasted. Otherwise we have as much space as we want.
+    if [[ $LINESLIMIT -eq 0 ]]; then
+        LLIMIT_H="+1"
+    else
+        LLIMIT_H=$(( LINESLIMIT - 3 ))
+    fi
+
+    >"$TMPFILE" || {
+        echo "Oh no! I can't create temporary file... Aborting." >&2
+        return 3
+    }
+
+    for file in "$@"; do
+        echo " --- file: $file ---"
+        echo " "
+        if [[ -r $file ]]; then
+            # This tail guarantees that LAST file name is visible (unless the limit is really small, <= 2 lines)
+            # (previous one(s) can be wiped by tail due to limit of lines).
+            # The file name is always visible if there's only one specified
+            # as argument (unless the limit value is really small, as above).
+            # All file names are always visible if there's no limit
+            # of lines, or the limit is big enough.
+            cat "$file" 2>&1 | tail -n $LLIMIT_H
+    elif [[ -e $file ]]; then
+	    echo "THIS FILE COULDN'T BE READ."
+	else
+	    echo "THIS FILE DOESN'T EXIST."
+	fi
+        echo " "
+    done >> "$TMPFILE"
+    if [[ $LINESLIMIT -eq 0 ]]; then
+        cat "$TMPFILE" | pastebunz
+    else
+        tail -n $LINESLIMIT "$TMPFILE" | pastebunz
+    fi
+    echo "** Please see the link above! **"
+
+    rm "$TMPFILE"
+    return 0
+}
+
+function files_pastebin
+{
+    files_pastebin_linelimit 0 "$@"
+}
+
+function system_pastebin
+{
+    echo -n "Please wait, it is going to take a while..."
+    local PASTE_TMP=/tmp/sabutil-tmp
+
+    >"$PASTE_TMP" || {
+	echo "Oh no! I can't create temporary file... Aborting."
+        return 1
+    }
+
+    echo "
+    sh /sbin/logscript.sh
+    " >> "$PASTE_TMP"
+    sh "/sbin/logscript.sh" >> "$PASTE_TMP"
+
+    cat "$PASTE_TMP"
+    cat "$PASTE_TMP" | pastebunz
+    echo "*** Please see the link above. ***"
+    rm "$PASTE_TMP"
+}
+
+function xorg0log_pastebin
+{
+    tail -n 150 /var/log/Xorg.0.log
+    files_pastebin_linelimit 150 /var/log/Xorg.0.log
+}
+
+function xsessionerrors_pastebin
+{
+    cat "$HOMEDIR/.xsession-errors" | tail -n 10
+    files_pastebin_linelimit 150 "$HOMEDIR/.xsession-errors"
+    if [[ $USER = "root" ]]; then
+        echo
+        echo "Notice: root's .xsession-errors file has been pasted."
+        echo "To get .xsession-errors from your regular account on which"
+        echo "you are logged using GDM, KDM or so (which is probably what you want),"
+        echo "run this script as that user, not root, or pastebin .xsession-errors"
+        echo "from YOUR home directory manually."
+        echo
+    fi
+}
+
+function dmesg_pastebin
+{
+    cat /var/log/dmesg
+    files_pastebin_linelimit 150 /var/log/dmesg
+}
+
+function grub_pastebin
+{
+    cat /boot/grub/grub.cfg
+    files_pastebin /boot/grub/grub.cfg
+}
+
+function fdisk_pastebin
+{
+    is_root || return # fdisk -l
+
+    local PASTE_TMP=/tmp/sabutil-tmp
+
+    >"$PASTE_TMP" || {
+	echo "Oh no! I can't create temporary file... Aborting."
+	return 1
+    }
+
+    (
+    echo "
+    fdisk -l
+    ";
+    fdisk -l;
+    ) > "$PASTE_TMP"
+
+    cat "$PASTE_TMP"
+    cat "$PASTE_TMP" | pastebunz
+    echo "*** Please see the link above. ***"
+    rm "$PASTE_TMP"
+}
+
+function messages_pastebin
+{
+    tail -n 150 /var/log/messages
+    files_pastebin_linelimit 150 /var/log/messages
+}
+
+function kdm_pastebin
+{
+    cat /var/log/kdm.log
+    files_pastebin_linelimit 150 /var/log/kdm.log
+}
+
+function rclog_pastebin
+{
+    if [[ -f /var/log/rc.log ]]; then
+        cat /var/log/rc.log | tail -n 10
+        files_pastebin_linelimit 150 /var/log/rc.log
+    else
+        echo "You Don't Have rc.log enabled in your /etc/rc.log"
+        echo " To enable, edit /etc/rc.log change NO to YES for rc_logger= "
+        echo ""
+    fi
+}
+
+function rcupdate_pastebin
+{
+    local PASTE_TMP=/tmp/sabutil-tmp
+
+    >"$PASTE_TMP" || {
+	echo "Oh no! I can't create temporary file... Aborting."
+	return 1
+    }
+
+    (
+    echo "
+    rc-update show
+    ";
+    rc-update show
+    ) > "$PASTE_TMP"
+
+    cat "$PASTE_TMP"
+    cat "$PASTE_TMP" | pastebunz
+    echo "*** Please see the link above. ***"
+    rm "$PASTE_TMP"
+}
+
+function xorg_pastebin
+{
+    echo "These files will be pasted (don't worry if any of them don't exist):"
+    ls -l /etc/X11/xorg.conf /etc/X11/xorg.conf.d/*
+    files_pastebin /etc/X11/xorg.conf.d/* /etc/X11/xorg.conf
+}
+
+function xorg_edit
+{
+    is_root &> /dev/null || echo "You are not root. You will only be able to view files."
+
+    local xorgfiles=() file
+    if (shopt -s nullglob; f=(/etc/X11/xorg.conf.d/*.conf); [[ ${#f[*]} -ne 0 ]] ); then
+	xorgfiles=( /etc/X11/xorg.conf.d/* ) # let's put all non-dot files; warning for non-conf is below
+    fi
+
+    if [[ -f /etc/X11/xorg.conf ]]; then
+            xorgfiles+=( /etc/X11/xorg.conf )
+    fi
+
+    if [[ ${#xorgfiles[*]} -eq 0 ]]; then
+        echo "I can't find any Xorg configuration files."
+        echo "There's no /etc/X11/xorg.conf or .conf files in /etc/X11/xorg.conf.d/ directory."
+        echo "Xorg uses autodected settings."
+    else
+        echo "These files affect your Xorg configuration."
+        echo "See http://fedoraproject.org/wiki/Input_device_configuration#xorg.conf.d for more informations."
+        echo "Select a file to edit or type q and press Enter to quit."
+        select file in "${xorgfiles[@]}"; do
+            if [[ -n $file ]]; then
+            # Not sure about files that don't start with a number and a hyphen - are they used?
+                if [[ ${file##*.} != "conf" ]]; then
+                    echo "Warning: this file has no .conf suffix and thus will be ignored by Xorg."
+                    press_enter
+                fi
+                nano -w "$file"
+                echo "Select a file to edit or type q and press Enter to quit."
+            elif [[ $REPLY = "q" || $REPLY = "Q" ]]; then
+                break
+            fi
+        done
+    fi
+}
+
+clear
+
+if [[ $1 = "menu" ]]; then
+    if [[ $EUID -ne 0 ]]; then
+        echo "This script should be run as root, or by someone in the root group. Some commands will not work for you." 1>&2
+	echo ""
+    fi
+    menu
+elif [[ $1 = "--help" || $1 = "-h" ]]; then
+    echo "usage:"
+    echo "$0 - will print some basic system infos"
+    echo "$0 menu - will show you menu"
+else
+    horner
+    echo ""
+    echo "Specify --help or -h to get help."
+ fi
diff --git a/app-misc/rogentoslive-tools/files/2/vga-cmd-parser b/app-misc/rogentoslive-tools/files/2/vga-cmd-parser
new file mode 100644
index 00000000..1e443171
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/vga-cmd-parser
@@ -0,0 +1,53 @@
+#!/usr/bin/python
+# Copyright 2008 Fabio Erculiani, Sabayon Linux Chief Architect
+# parses vga= parameters from cmdline given by isolinux and returns the right resolution
+# Shut up!
+
+res_map = {
+	"0x385": ("640x400",24),
+	"0x312": ("640x480",24),
+	"0x315": ("800x600",24),
+	"0x318": ("1024x768",24),
+	"0x31b": ("1280x1024",24),
+	"0x330": ("640x400",16),
+	"0x33E": ("640x400",24),
+	"0x331": ("640x480",16),
+	"0x33F": ("640x480",24),
+	"0x332": ("800x600",16),
+	"0x340": ("800x600",24),
+	"0x333": ("1024x768",16),
+	"0x341": ("1024x768",24),
+	"0x334": ("1152x864",16),
+	"0x342": ("1152x864",24),
+	"0x335": ("1280x960",16),
+	"0x343": ("1280x960",24),
+	"0x336": ("1280x1024",16),
+	"0x344": ("1280x1024",24),
+	"0x337": ("1400x1050",16),
+	"0x345": ("1400x1050",24),
+	"0x338": ("1600x1200",16),
+	"0x346": ("1600x1200",24),
+	"0x339": ("1792x1344",16),
+	"0x347": ("1792x1344",24),
+	"0x33A": ("1856x1392",16),
+	"0x348": ("1856x1392",24),
+	"0x33B": ("1920x1440",16),
+	"0x349": ("1920x1440",24),
+	"0x33C": ("2048x1536",16),
+	"0x34A": ("2048x1536",24)
+}
+
+f = open("/proc/cmdline")
+cmdline = f.readline().strip().split()
+cmdline.reverse()
+for item in cmdline:
+	if item.startswith("vga="):
+		item_split = item.split("=")
+		if len(item_split) == 2:
+			data = item_split[1]
+			try:
+				if res_map.get(data) != None:
+					print res_map[data][0],res_map[data][1]
+				break
+			except TypeError:
+				pass
diff --git a/app-misc/rogentoslive-tools/files/2/x-setup-configuration b/app-misc/rogentoslive-tools/files/2/x-setup-configuration
new file mode 100644
index 00000000..b8747097
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/x-setup-configuration
@@ -0,0 +1,46 @@
+#!/bin/bash
+
+# get livecd functions
+source /sbin/livecd-functions.sh
+source /sbin/rogentos-functions.sh
+
+runtime_linking_proprietary_drivers() {
+	if [ -d "/lib/nvidia" ] || [ -d "/lib/fglrx" ]; then
+		current_arch=$(uname -m)
+		if [ "$current_arch" == "x86_64" ]; then
+			ld_arch="elf_x86_64"
+		elif [ "$current_arch" == "i686" ]; then
+			ld_arch="elf_i386"
+		fi
+		lspci_vga=$(lspci | grep ' VGA ')
+		mount -t tmpfs none /lib/modules/$(uname -r)/video
+		if [ -n "`echo $lspci_vga | grep -i nvidia`" ]; then
+			ld -m $ld_arch -r -o /lib/modules/$(uname -r)/video/nvidia.ko /lib/nvidia/nvidia.o /lib/nvidia/nvidia.mod.o
+			depmod -a &> /dev/null
+		elif [ -n "`echo $lspci_vga | grep -i ati`" ]; then
+			ld -m $ld_arch -r -o /lib/modules/$(uname -r)/video/fglrx.ko /lib/fglrx/fglrx.o /lib/fglrx/fglrx.mod.o
+			depmod -a &> /dev/null
+		elif [ -n "`echo $lspci_vga | grep -i unknown`" ]; then
+			ld -m $ld_arch -r -o /lib/modules/$(uname -r)/video/nvidia.ko /lib/nvidia/nvidia.o /lib/nvidia/nvidia.mod.o
+			ld -m $ld_arch -r -o /lib/modules/$(uname -r)/video/fglrx.ko /lib/fglrx/fglrx.o /lib/fglrx/fglrx.mod.o
+			depmod -a &> /dev/null
+		elif [ -z "$lspci_vga" ]; then
+			ld -m $ld_arch -r -o /lib/modules/$(uname -r)/video/nvidia.ko /lib/nvidia/nvidia.o /lib/nvidia/nvidia.mod.o
+			ld -m $ld_arch -r -o /lib/modules/$(uname -r)/video/fglrx.ko /lib/fglrx/fglrx.o /lib/fglrx/fglrx.mod.o
+			depmod -a &> /dev/null
+		fi
+	fi
+}
+
+# create seed
+rm -f /etc/x-setup-configuration-running
+touch /etc/x-setup-configuration-running
+
+# Prepare Video Cards Proprietary Drivers
+if rogentos_is_live; then
+	runtime_linking_proprietary_drivers
+fi
+/sbin/gpu-configuration &> /dev/null
+
+# delete seed
+rm -f /etc/x-setup-configuration-running
diff --git a/app-misc/rogentoslive-tools/files/2/x-setup-init.d b/app-misc/rogentoslive-tools/files/2/x-setup-init.d
new file mode 100644
index 00000000..0c486c06
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/x-setup-init.d
@@ -0,0 +1,26 @@
+#!/sbin/runscript
+# Copyright 2009-2013 Sabayon
+# Distributed under the terms of the GNU General Public License v2
+
+depend() {
+    after mtab
+    before hostname
+    before xdm
+}
+
+
+
+start() {
+    . /sbin/rogentos-functions.sh
+
+    ebegin "Configuring GPUs and input devices"
+    if rogentos_is_live; then
+        start-stop-daemon --start --background --pidfile /var/run/x-setup.pid \
+            --make-pidfile --exec /usr/sbin/x-setup-configuration
+        eend 0
+        return 0
+    fi
+
+    /usr/libexec/x-setup.sh > /dev/null
+    eend ${?}
+}
diff --git a/app-misc/rogentoslive-tools/files/2/x-setup.service b/app-misc/rogentoslive-tools/files/2/x-setup.service
new file mode 100644
index 00000000..58ffa4af
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/x-setup.service
@@ -0,0 +1,14 @@
+# This unit is meant to run only after install.
+
+[Unit]
+Description=GPUs and input devices setup
+ConditionKernelCommandLine=!cdroot
+Before=display-manager.service
+
+[Service]
+Type=oneshot
+RemainAfterExit=true
+ExecStart=/usr/libexec/x-setup.sh
+
+[Install]
+WantedBy=multi-user.target
\ No newline at end of file
diff --git a/app-misc/rogentoslive-tools/files/2/x-setup.sh b/app-misc/rogentoslive-tools/files/2/x-setup.sh
new file mode 100644
index 00000000..4463a66b
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/2/x-setup.sh
@@ -0,0 +1,49 @@
+#!/bin/bash
+
+. /sbin/rogentos-functions.sh
+
+REDETECT=$(cat /proc/cmdline | grep "gpudetect")
+
+gpus_same() {
+    # $1 and $2: output lines from "lspci"
+    local id1 id2 # [xxxx:]xx:xx.x
+    local dev1 dev2 # vendor and device: xxxx:xxxx
+    id1=$(echo "$1" | awk '/ VGA / { print $1 }')
+    id2=$(echo "$2" | awk '/ VGA / { print $1 }')
+    if [ -z "$id1" ] || [ -z "$id2" ]; then
+        return 1
+    fi
+    dev1=$(lspci -s "$id1" -n | awk '{ print $3 }')
+    dev2=$(lspci -s "$id2" -n | awk '{ print $3 }')
+    [ "$dev1" = "$dev2" ]
+}
+
+
+if [ -e /first_time_run ] || [ ! -e /etc/gpu-detector.conf ] \
+    || [ -n "${REDETECT}" ]; then
+    echo "Configuring GPUs and input devices for the first time"
+    lspci | grep ' VGA ' > /etc/gpu-detector.conf
+    /usr/sbin/x-setup-configuration
+    exit 0
+fi
+
+infostr_run="Configuring GPUs and input devices"
+infostr_skip="Skipping GPUs and input devices configuration"
+lspci_vga=$(lspci | grep ' VGA ')
+stored_vga=$(cat /etc/gpu-detector.conf)
+
+if [ "${lspci_vga}" != "${stored_vga}" ]; then
+    # Strings are different, let's do the more "heavy" and accurate comparison.
+    if gpus_same "${lspci_vga}" "${stored_vga}"; then
+        # this may happen after vendor changes its name etc.
+        # and PCI ID file is updated
+        echo "${infostr_skip}, only updating GPU information file"
+    else
+        echo "${infostr_run}"
+        /usr/sbin/x-setup-configuration
+    fi
+    echo "${lspci_vga}" > /etc/gpu-detector.conf
+    exit 0
+fi
+
+echo "${infostr_skip}"