summaryrefslogtreecommitdiff
path: root/app-laptop/tp_smapi/files
diff options
context:
space:
mode:
authorV3n3RiX <venerix@koprulu.sector>2024-04-25 11:17:25 +0100
committerV3n3RiX <venerix@koprulu.sector>2024-04-25 11:17:25 +0100
commit77f479b205c8ffcb9f422505fba0b8a04268cbff (patch)
tree74a93e2304691435511436cb32ccbe3d2a0ecbf9 /app-laptop/tp_smapi/files
parente322cc124bb1b5a23c3e995335b76e45d5401f97 (diff)
app-laptop/tp_smapi : import from Gentoo, convert to DKMS
Diffstat (limited to 'app-laptop/tp_smapi/files')
-rw-r--r--app-laptop/tp_smapi/files/tp_smapi-0.40-confd20
-rw-r--r--app-laptop/tp_smapi/files/tp_smapi-0.40-initd92
2 files changed, 112 insertions, 0 deletions
diff --git a/app-laptop/tp_smapi/files/tp_smapi-0.40-confd b/app-laptop/tp_smapi/files/tp_smapi-0.40-confd
new file mode 100644
index 00000000..7c80f35e
--- /dev/null
+++ b/app-laptop/tp_smapi/files/tp_smapi-0.40-confd
@@ -0,0 +1,20 @@
+# /etc/conf.d/smapi: config file for /etc/init.d/smapi
+
+# use '/etc/init.d/smapi info' at any time to check the thresholds
+# currently used by the driver
+# Note that the kernel does some sanity checking on the values and
+# will not accept any combination of values you may try to set up.
+# (i.e. stop value lower than start) So if the output of info does
+# not match what you wanted the driver probably did not like your
+# configuration.
+
+# default thresholds for '/etc/init.d/smapi start'
+SMAPI_THRESH_START="30"
+SMAPI_THRESH_STOP="85"
+# values to be used for '/etc/init.d/smapi low'
+SMAPI_LOW_THRESH_START="${SMAPI_THRESH_START}"
+SMAPI_LOW_THRESH_STOP="${SMAPI_THRESH_STOP}"
+
+# values to be used for '/etc/init.d/smapi high'
+SMAPI_HIGH_THRESH_START="95"
+SMAPI_HIGH_THRESH_STOP="100"
diff --git a/app-laptop/tp_smapi/files/tp_smapi-0.40-initd b/app-laptop/tp_smapi/files/tp_smapi-0.40-initd
new file mode 100644
index 00000000..3b8c10d9
--- /dev/null
+++ b/app-laptop/tp_smapi/files/tp_smapi-0.40-initd
@@ -0,0 +1,92 @@
+#!/sbin/openrc-run
+# Copyright (C) 2011 Henning Schild <henning@wh9.tu-dresden.de>
+# Copyright (C) 2011 Sebastian Pipping <sebastian@pipping.org>
+#
+# Distributed under the terms of the GNU General Public License, v2 or later
+
+extra_started_commands="low high info"
+
+SMAPI_SYSFS="/sys/devices/platform/smapi"
+BATS="BAT0 BAT1"
+
+depend() {
+ after modules
+}
+
+start() {
+ local state1
+ local state2
+
+ ebegin "Making sure that module 'tp_smapi' is loaded"
+ modprobe tp_smapi
+ state1=$?
+ eend ${state1}
+
+ ebegin "Checking for \"${SMAPI_SYSFS}\""
+ test -d "${SMAPI_SYSFS}"
+ state2=$?
+ eend ${state2}
+
+ if [ "${state1}" -ne "0" ] || [ "${state2}" -ne "0" ]; then
+ return 1
+ fi
+
+ ebegin "Starting ${SVCNAME}"
+ set_all ${SMAPI_THRESH_START} ${SMAPI_THRESH_STOP}
+ eend $?
+}
+
+stop() {
+ einfo "Nothing required to be done to stop ${SVCNAME}"
+}
+
+require_started() {
+ if ! service_started; then
+ "${RC_SERVICE}" start || return $?
+ fi
+}
+
+high() {
+ require_started
+
+ einfo "Switching ${SVCNAME} to high thesholds"
+ set_all ${SMAPI_HIGH_THRESH_START} ${SMAPI_HIGH_THRESH_STOP}
+}
+
+low() {
+ require_started
+
+ einfo "Switching ${SVCNAME} to low thesholds"
+ set_all ${SMAPI_LOW_THRESH_START} ${SMAPI_LOW_THRESH_STOP}
+}
+
+set_all() {
+ local tstart=$1
+ local tstop=$2
+ local bat
+
+ for bat in ${BATS}; do
+ ebegin " setting thresholds for ${bat}: $tstart $tstop"
+ echo ${tstart} > ${SMAPI_SYSFS}/${bat}/start_charge_thresh
+ echo ${tstop} > ${SMAPI_SYSFS}/${bat}/stop_charge_thresh
+ eend $?
+ done
+}
+
+info() {
+ local presence
+ local tstart
+ local tstop
+ local bat
+
+ require_started
+
+ for bat in ${BATS}; do
+ tstart=$(cat ${SMAPI_SYSFS}/${bat}/start_charge_thresh)
+ tstop=$(cat ${SMAPI_SYSFS}/${bat}/stop_charge_thresh)
+ if [ "$(cat ${SMAPI_SYSFS}/${bat}/installed)" -eq "1" ]; then
+ presence=" [installed]"
+ fi
+ einfo "${bat}: ${tstart} ${tstop}${presence}"
+ done
+}