From 4b2cc4a30a78eda5b747932226cf16edd8c125b6 Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Sat, 18 May 2019 00:37:02 +0100 Subject: sys-kernel/linux-{image,sources}-redcore-lts : drop 4.14 --- ...ersion-0.162-CPU-scheduler-linux-hardened.patch | 9560 -------------------- ...4.14-0002-Make-preemptible-kernel-default.patch | 733 -- ...-Expose-vmsplit-for-our-poor-32-bit-users.patch | 48 - ...res-timeout-variants-of-schedule_timeout-.patch | 153 - ...e-calls-of-schedule_timeout-1-to-use-the-.patch | 50 - ...onvert-msleep-to-use-hrtimers-when-active.patch | 54 - ...-schedule-timeout-1-with-schedule_min_hrt.patch | 529 -- ...-calls-to-schedule_timeout_interruptible-.patch | 311 - ...-calls-to-schedule_timeout_uninterruptibl.patch | 160 - ...rtimer-overlay-when-pm_freezing-since-som.patch | 69 - ...r-granularity-and-minimum-hrtimeout-confi.patch | 136 - ...efault-Hz-of-100-in-combination-with-MuQS.patch | 81 - ...ed-IRQs-optionally-the-default-which-can-.patch | 61 - .../files/4.14-0014-Swap-sucks.patch | 25 - ...SS.c-needs-irq_regs.h-to-use-get_irq_regs.patch | 19 - .../4.14-0016-unfuck-MuQSS-on-linux-4_14_15+.patch | 48 - .../4.14-0017-unfuck-MuQSS-on-linux-4_14_75+.patch | 14 - ...h10k-activate-user-space-firmware-loading.patch | 13 - .../files/4.14-amd64.config | 9101 ------------------- ...introduce-NUMA-identity-node-sched-domain.patch | 46 - .../files/4.14-k10temp-add-ZEN-support.patch | 177 - .../files/4.14-linux-hardened.patch | 2868 ------ .../files/4.14-mute-pps_state_mismatch.patch | 16 - ...4-restore-SD_PREFER_SIBLING-on-MC-domains.patch | 12 - .../files/4.14-uksm-linux-hardened.patch | 6919 -------------- .../linux-image-redcore-lts-4.14.95-r1.ebuild | 165 - .../linux-image-redcore-lts-4.19.20-r1.ebuild | 166 - .../linux-image-redcore-lts-4.19.20-r2.ebuild | 166 + 28 files changed, 166 insertions(+), 31534 deletions(-) delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0001-MuQSS-version-0.162-CPU-scheduler-linux-hardened.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0002-Make-preemptible-kernel-default.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0003-Expose-vmsplit-for-our-poor-32-bit-users.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0004-Create-highres-timeout-variants-of-schedule_timeout-.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0005-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0006-Convert-msleep-to-use-hrtimers-when-active.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0007-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0008-Replace-all-calls-to-schedule_timeout_interruptible-.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0009-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0010-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0011-Make-hrtimer-granularity-and-minimum-hrtimeout-confi.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0012-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0013-Make-threaded-IRQs-optionally-the-default-which-can-.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0014-Swap-sucks.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0015-MuQSS.c-needs-irq_regs.h-to-use-get_irq_regs.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0016-unfuck-MuQSS-on-linux-4_14_15+.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-0017-unfuck-MuQSS-on-linux-4_14_75+.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-Revert-ath10k-activate-user-space-firmware-loading.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-amd64.config delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-introduce-NUMA-identity-node-sched-domain.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-k10temp-add-ZEN-support.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-linux-hardened.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-mute-pps_state_mismatch.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-restore-SD_PREFER_SIBLING-on-MC-domains.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/files/4.14-uksm-linux-hardened.patch delete mode 100644 sys-kernel/linux-image-redcore-lts/linux-image-redcore-lts-4.14.95-r1.ebuild delete mode 100644 sys-kernel/linux-image-redcore-lts/linux-image-redcore-lts-4.19.20-r1.ebuild create mode 100644 sys-kernel/linux-image-redcore-lts/linux-image-redcore-lts-4.19.20-r2.ebuild (limited to 'sys-kernel/linux-image-redcore-lts') diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0001-MuQSS-version-0.162-CPU-scheduler-linux-hardened.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0001-MuQSS-version-0.162-CPU-scheduler-linux-hardened.patch deleted file mode 100644 index a81dbeac..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0001-MuQSS-version-0.162-CPU-scheduler-linux-hardened.patch +++ /dev/null @@ -1,9560 +0,0 @@ -diff -Nur a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c ---- a/arch/powerpc/platforms/cell/spufs/sched.c 2018-12-21 13:13:19.000000000 +0000 -+++ b/arch/powerpc/platforms/cell/spufs/sched.c 2019-01-05 20:22:51.089998199 +0000 -@@ -65,11 +65,6 @@ - static struct timer_list spuloadavg_timer; - - /* -- * Priority of a normal, non-rt, non-niced'd process (aka nice level 0). -- */ --#define NORMAL_PRIO 120 -- --/* - * Frequency of the spu scheduler tick. By default we do one SPU scheduler - * tick for every 10 CPU scheduler ticks. - */ -diff -Nur a/arch/x86/Kconfig b/arch/x86/Kconfig ---- a/arch/x86/Kconfig 2019-01-05 20:17:13.829237906 +0000 -+++ b/arch/x86/Kconfig 2019-01-05 20:30:14.244135060 +0000 -@@ -957,6 +957,20 @@ - config SCHED_SMT - def_bool y if SMP - -+config SMT_NICE -+ bool "SMT (Hyperthreading) aware nice priority and policy support" -+ depends on SCHED_MUQSS && SCHED_SMT -+ default y -+ ---help--- -+ Enabling Hyperthreading on Intel CPUs decreases the effectiveness -+ of the use of 'nice' levels and different scheduling policies -+ (e.g. realtime) due to sharing of CPU power between hyperthreads. -+ SMT nice support makes each logical CPU aware of what is running on -+ its hyperthread siblings, maintaining appropriate distribution of -+ CPU according to nice levels and scheduling policies at the expense -+ of slightly increased overhead. -+ If unsure say Y here. -+ - config SCHED_MC - def_bool y - prompt "Multi-core scheduler support" -diff -Nur a/Documentation/scheduler/sched-BFS.txt b/Documentation/scheduler/sched-BFS.txt ---- a/Documentation/scheduler/sched-BFS.txt 1970-01-01 01:00:00.000000000 +0100 -+++ b/Documentation/scheduler/sched-BFS.txt 2019-01-05 20:22:51.089998199 +0000 -@@ -0,0 +1,351 @@ -+BFS - The Brain Fuck Scheduler by Con Kolivas. -+ -+Goals. -+ -+The goal of the Brain Fuck Scheduler, referred to as BFS from here on, is to -+completely do away with the complex designs of the past for the cpu process -+scheduler and instead implement one that is very simple in basic design. -+The main focus of BFS is to achieve excellent desktop interactivity and -+responsiveness without heuristics and tuning knobs that are difficult to -+understand, impossible to model and predict the effect of, and when tuned to -+one workload cause massive detriment to another. -+ -+ -+Design summary. -+ -+BFS is best described as a single runqueue, O(n) lookup, earliest effective -+virtual deadline first design, loosely based on EEVDF (earliest eligible virtual -+deadline first) and my previous Staircase Deadline scheduler. Each component -+shall be described in order to understand the significance of, and reasoning for -+it. The codebase when the first stable version was released was approximately -+9000 lines less code than the existing mainline linux kernel scheduler (in -+2.6.31). This does not even take into account the removal of documentation and -+the cgroups code that is not used. -+ -+Design reasoning. -+ -+The single runqueue refers to the queued but not running processes for the -+entire system, regardless of the number of CPUs. The reason for going back to -+a single runqueue design is that once multiple runqueues are introduced, -+per-CPU or otherwise, there will be complex interactions as each runqueue will -+be responsible for the scheduling latency and fairness of the tasks only on its -+own runqueue, and to achieve fairness and low latency across multiple CPUs, any -+advantage in throughput of having CPU local tasks causes other disadvantages. -+This is due to requiring a very complex balancing system to at best achieve some -+semblance of fairness across CPUs and can only maintain relatively low latency -+for tasks bound to the same CPUs, not across them. To increase said fairness -+and latency across CPUs, the advantage of local runqueue locking, which makes -+for better scalability, is lost due to having to grab multiple locks. -+ -+A significant feature of BFS is that all accounting is done purely based on CPU -+used and nowhere is sleep time used in any way to determine entitlement or -+interactivity. Interactivity "estimators" that use some kind of sleep/run -+algorithm are doomed to fail to detect all interactive tasks, and to falsely tag -+tasks that aren't interactive as being so. The reason for this is that it is -+close to impossible to determine that when a task is sleeping, whether it is -+doing it voluntarily, as in a userspace application waiting for input in the -+form of a mouse click or otherwise, or involuntarily, because it is waiting for -+another thread, process, I/O, kernel activity or whatever. Thus, such an -+estimator will introduce corner cases, and more heuristics will be required to -+cope with those corner cases, introducing more corner cases and failed -+interactivity detection and so on. Interactivity in BFS is built into the design -+by virtue of the fact that tasks that are waking up have not used up their quota -+of CPU time, and have earlier effective deadlines, thereby making it very likely -+they will preempt any CPU bound task of equivalent nice level. See below for -+more information on the virtual deadline mechanism. Even if they do not preempt -+a running task, because the rr interval is guaranteed to have a bound upper -+limit on how long a task will wait for, it will be scheduled within a timeframe -+that will not cause visible interface jitter. -+ -+ -+Design details. -+ -+Task insertion. -+ -+BFS inserts tasks into each relevant queue as an O(1) insertion into a double -+linked list. On insertion, *every* running queue is checked to see if the newly -+queued task can run on any idle queue, or preempt the lowest running task on the -+system. This is how the cross-CPU scheduling of BFS achieves significantly lower -+latency per extra CPU the system has. In this case the lookup is, in the worst -+case scenario, O(n) where n is the number of CPUs on the system. -+ -+Data protection. -+ -+BFS has one single lock protecting the process local data of every task in the -+global queue. Thus every insertion, removal and modification of task data in the -+global runqueue needs to grab the global lock. However, once a task is taken by -+a CPU, the CPU has its own local data copy of the running process' accounting -+information which only that CPU accesses and modifies (such as during a -+timer tick) thus allowing the accounting data to be updated lockless. Once a -+CPU has taken a task to run, it removes it from the global queue. Thus the -+global queue only ever has, at most, -+ -+ (number of tasks requesting cpu time) - (number of logical CPUs) + 1 -+ -+tasks in the global queue. This value is relevant for the time taken to look up -+tasks during scheduling. This will increase if many tasks with CPU affinity set -+in their policy to limit which CPUs they're allowed to run on if they outnumber -+the number of CPUs. The +1 is because when rescheduling a task, the CPU's -+currently running task is put back on the queue. Lookup will be described after -+the virtual deadline mechanism is explained. -+ -+Virtual deadline. -+ -+The key to achieving low latency, scheduling fairness, and "nice level" -+distribution in BFS is entirely in the virtual deadline mechanism. The one -+tunable in BFS is the rr_interval, or "round robin interval". This is the -+maximum time two SCHED_OTHER (or SCHED_NORMAL, the common scheduling policy) -+tasks of the same nice level will be running for, or looking at it the other -+way around, the longest duration two tasks of the same nice level will be -+delayed for. When a task requests cpu time, it is given a quota (time_slice) -+equal to the rr_interval and a virtual deadline. The virtual deadline is -+offset from the current time in jiffies by this equation: -+ -+ jiffies + (prio_ratio * rr_interval) -+ -+The prio_ratio is determined as a ratio compared to the baseline of nice -20 -+and increases by 10% per nice level. The deadline is a virtual one only in that -+no guarantee is placed that a task will actually be scheduled by this time, but -+it is used to compare which task should go next. There are three components to -+how a task is next chosen. First is time_slice expiration. If a task runs out -+of its time_slice, it is descheduled, the time_slice is refilled, and the -+deadline reset to that formula above. Second is sleep, where a task no longer -+is requesting CPU for whatever reason. The time_slice and deadline are _not_ -+adjusted in this case and are just carried over for when the task is next -+scheduled. Third is preemption, and that is when a newly waking task is deemed -+higher priority than a currently running task on any cpu by virtue of the fact -+that it has an earlier virtual deadline than the currently running task. The -+earlier deadline is the key to which task is next chosen for the first and -+second cases. Once a task is descheduled, it is put back on the queue, and an -+O(n) lookup of all queued-but-not-running tasks is done to determine which has -+the earliest deadline and that task is chosen to receive CPU next. -+ -+The CPU proportion of different nice tasks works out to be approximately the -+ -+ (prio_ratio difference)^2 -+ -+The reason it is squared is that a task's deadline does not change while it is -+running unless it runs out of time_slice. Thus, even if the time actually -+passes the deadline of another task that is queued, it will not get CPU time -+unless the current running task deschedules, and the time "base" (jiffies) is -+constantly moving. -+ -+Task lookup. -+ -+BFS has 103 priority queues. 100 of these are dedicated to the static priority -+of realtime tasks, and the remaining 3 are, in order of best to worst priority, -+SCHED_ISO (isochronous), SCHED_NORMAL, and SCHED_IDLEPRIO (idle priority -+scheduling). When a task of these priorities is queued, a bitmap of running -+priorities is set showing which of these priorities has tasks waiting for CPU -+time. When a CPU is made to reschedule, the lookup for the next task to get -+CPU time is performed in the following way: -+ -+First the bitmap is checked to see what static priority tasks are queued. If -+any realtime priorities are found, the corresponding queue is checked and the -+first task listed there is taken (provided CPU affinity is suitable) and lookup -+is complete. If the priority corresponds to a SCHED_ISO task, they are also -+taken in FIFO order (as they behave like SCHED_RR). If the priority corresponds -+to either SCHED_NORMAL or SCHED_IDLEPRIO, then the lookup becomes O(n). At this -+stage, every task in the runlist that corresponds to that priority is checked -+to see which has the earliest set deadline, and (provided it has suitable CPU -+affinity) it is taken off the runqueue and given the CPU. If a task has an -+expired deadline, it is taken and the rest of the lookup aborted (as they are -+chosen in FIFO order). -+ -+Thus, the lookup is O(n) in the worst case only, where n is as described -+earlier, as tasks may be chosen before the whole task list is looked over. -+ -+ -+Scalability. -+ -+The major limitations of BFS will be that of scalability, as the separate -+runqueue designs will have less lock contention as the number of CPUs rises. -+However they do not scale linearly even with separate runqueues as multiple -+runqueues will need to be locked concurrently on such designs to be able to -+achieve fair CPU balancing, to try and achieve some sort of nice-level fairness -+across CPUs, and to achieve low enough latency for tasks on a busy CPU when -+other CPUs would be more suited. BFS has the advantage that it requires no -+balancing algorithm whatsoever, as balancing occurs by proxy simply because -+all CPUs draw off the global runqueue, in priority and deadline order. Despite -+the fact that scalability is _not_ the prime concern of BFS, it both shows very -+good scalability to smaller numbers of CPUs and is likely a more scalable design -+at these numbers of CPUs. -+ -+It also has some very low overhead scalability features built into the design -+when it has been deemed their overhead is so marginal that they're worth adding. -+The first is the local copy of the running process' data to the CPU it's running -+on to allow that data to be updated lockless where possible. Then there is -+deference paid to the last CPU a task was running on, by trying that CPU first -+when looking for an idle CPU to use the next time it's scheduled. Finally there -+is the notion of cache locality beyond the last running CPU. The sched_domains -+information is used to determine the relative virtual "cache distance" that -+other CPUs have from the last CPU a task was running on. CPUs with shared -+caches, such as SMT siblings, or multicore CPUs with shared caches, are treated -+as cache local. CPUs without shared caches are treated as not cache local, and -+CPUs on different NUMA nodes are treated as very distant. This "relative cache -+distance" is used by modifying the virtual deadline value when doing lookups. -+Effectively, the deadline is unaltered between "cache local" CPUs, doubled for -+"cache distant" CPUs, and quadrupled for "very distant" CPUs. The reasoning -+behind the doubling of deadlines is as follows. The real cost of migrating a -+task from one CPU to another is entirely dependant on the cache footprint of -+the task, how cache intensive the task is, how long it's been running on that -+CPU to take up the bulk of its cache, how big the CPU cache is, how fast and -+how layered the CPU cache is, how fast a context switch is... and so on. In -+other words, it's close to random in the real world where we do more than just -+one sole workload. The only thing we can be sure of is that it's not free. So -+BFS uses the principle that an idle CPU is a wasted CPU and utilising idle CPUs -+is more important than cache locality, and cache locality only plays a part -+after that. Doubling the effective deadline is based on the premise that the -+"cache local" CPUs will tend to work on the same tasks up to double the number -+of cache local CPUs, and once the workload is beyond that amount, it is likely -+that none of the tasks are cache warm anywhere anyway. The quadrupling for NUMA -+is a value I pulled out of my arse. -+ -+When choosing an idle CPU for a waking task, the cache locality is determined -+according to where the task last ran and then idle CPUs are ranked from best -+to worst to choose the most suitable idle CPU based on cache locality, NUMA -+node locality and hyperthread sibling business. They are chosen in the -+following preference (if idle): -+ -+* Same core, idle or busy cache, idle threads -+* Other core, same cache, idle or busy cache, idle threads. -+* Same node, other CPU, idle cache, idle threads. -+* Same node, other CPU, busy cache, idle threads. -+* Same core, busy threads. -+* Other core, same cache, busy threads. -+* Same node, other CPU, busy threads. -+* Other node, other CPU, idle cache, idle threads. -+* Other node, other CPU, busy cache, idle threads. -+* Other node, other CPU, busy threads. -+ -+This shows the SMT or "hyperthread" awareness in the design as well which will -+choose a real idle core first before a logical SMT sibling which already has -+tasks on the physical CPU. -+ -+Early benchmarking of BFS suggested scalability dropped off at the 16 CPU mark. -+However this benchmarking was performed on an earlier design that was far less -+scalable than the current one so it's hard to know how scalable it is in terms -+of both CPUs (due to the global runqueue) and heavily loaded machines (due to -+O(n) lookup) at this stage. Note that in terms of scalability, the number of -+_logical_ CPUs matters, not the number of _physical_ CPUs. Thus, a dual (2x) -+quad core (4X) hyperthreaded (2X) machine is effectively a 16X. Newer benchmark -+results are very promising indeed, without needing to tweak any knobs, features -+or options. Benchmark contributions are most welcome. -+ -+ -+Features -+ -+As the initial prime target audience for BFS was the average desktop user, it -+was designed to not need tweaking, tuning or have features set to obtain benefit -+from it. Thus the number of knobs and features has been kept to an absolute -+minimum and should not require extra user input for the vast majority of cases. -+There are precisely 2 tunables, and 2 extra scheduling policies. The rr_interval -+and iso_cpu tunables, and the SCHED_ISO and SCHED_IDLEPRIO policies. In addition -+to this, BFS also uses sub-tick accounting. What BFS does _not_ now feature is -+support for CGROUPS. The average user should neither need to know what these -+are, nor should they need to be using them to have good desktop behaviour. -+ -+rr_interval -+ -+There is only one "scheduler" tunable, the round robin interval. This can be -+accessed in -+ -+ /proc/sys/kernel/rr_interval -+ -+The value is in milliseconds, and the default value is set to 6 on a -+uniprocessor machine, and automatically set to a progressively higher value on -+multiprocessor machines. The reasoning behind increasing the value on more CPUs -+is that the effective latency is decreased by virtue of there being more CPUs on -+BFS (for reasons explained above), and increasing the value allows for less -+cache contention and more throughput. Valid values are from 1 to 1000 -+Decreasing the value will decrease latencies at the cost of decreasing -+throughput, while increasing it will improve throughput, but at the cost of -+worsening latencies. The accuracy of the rr interval is limited by HZ resolution -+of the kernel configuration. Thus, the worst case latencies are usually slightly -+higher than this actual value. The default value of 6 is not an arbitrary one. -+It is based on the fact that humans can detect jitter at approximately 7ms, so -+aiming for much lower latencies is pointless under most circumstances. It is -+worth noting this fact when comparing the latency performance of BFS to other -+schedulers. Worst case latencies being higher than 7ms are far worse than -+average latencies not being in the microsecond range. -+ -+Isochronous scheduling. -+ -+Isochronous scheduling is a unique scheduling policy designed to provide -+near-real-time performance to unprivileged (ie non-root) users without the -+ability to starve the machine indefinitely. Isochronous tasks (which means -+"same time") are set using, for example, the schedtool application like so: -+ -+ schedtool -I -e amarok -+ -+This will start the audio application "amarok" as SCHED_ISO. How SCHED_ISO works -+is that it has a priority level between true realtime tasks and SCHED_NORMAL -+which would allow them to preempt all normal tasks, in a SCHED_RR fashion (ie, -+if multiple SCHED_ISO tasks are running, they purely round robin at rr_interval -+rate). However if ISO tasks run for more than a tunable finite amount of time, -+they are then demoted back to SCHED_NORMAL scheduling. This finite amount of -+time is the percentage of _total CPU_ available across the machine, configurable -+as a percentage in the following "resource handling" tunable (as opposed to a -+scheduler tunable): -+ -+ /proc/sys/kernel/iso_cpu -+ -+and is set to 70% by default. It is calculated over a rolling 5 second average -+Because it is the total CPU available, it means that on a multi CPU machine, it -+is possible to have an ISO task running as realtime scheduling indefinitely on -+just one CPU, as the other CPUs will be available. Setting this to 100 is the -+equivalent of giving all users SCHED_RR access and setting it to 0 removes the -+ability to run any pseudo-realtime tasks. -+ -+A feature of BFS is that it detects when an application tries to obtain a -+realtime policy (SCHED_RR or SCHED_FIFO) and the caller does not have the -+appropriate privileges to use those policies. When it detects this, it will -+give the task SCHED_ISO policy instead. Thus it is transparent to the user. -+Because some applications constantly set their policy as well as their nice -+level, there is potential for them to undo the override specified by the user -+on the command line of setting the policy to SCHED_ISO. To counter this, once -+a task has been set to SCHED_ISO policy, it needs superuser privileges to set -+it back to SCHED_NORMAL. This will ensure the task remains ISO and all child -+processes and threads will also inherit the ISO policy. -+ -+Idleprio scheduling. -+ -+Idleprio scheduling is a scheduling policy designed to give out CPU to a task -+_only_ when the CPU would be otherwise idle. The idea behind this is to allow -+ultra low priority tasks to be run in the background that have virtually no -+effect on the foreground tasks. This is ideally suited to distributed computing -+clients (like setiathome, folding, mprime etc) but can also be used to start -+a video encode or so on without any slowdown of other tasks. To avoid this -+policy from grabbing shared resources and holding them indefinitely, if it -+detects a state where the task is waiting on I/O, the machine is about to -+suspend to ram and so on, it will transiently schedule them as SCHED_NORMAL. As -+per the Isochronous task management, once a task has been scheduled as IDLEPRIO, -+it cannot be put back to SCHED_NORMAL without superuser privileges. Tasks can -+be set to start as SCHED_IDLEPRIO with the schedtool command like so: -+ -+ schedtool -D -e ./mprime -+ -+Subtick accounting. -+ -+It is surprisingly difficult to get accurate CPU accounting, and in many cases, -+the accounting is done by simply determining what is happening at the precise -+moment a timer tick fires off. This becomes increasingly inaccurate as the -+timer tick frequency (HZ) is lowered. It is possible to create an application -+which uses almost 100% CPU, yet by being descheduled at the right time, records -+zero CPU usage. While the main problem with this is that there are possible -+security implications, it is also difficult to determine how much CPU a task -+really does use. BFS tries to use the sub-tick accounting from the TSC clock, -+where possible, to determine real CPU usage. This is not entirely reliable, but -+is far more likely to produce accurate CPU usage data than the existing designs -+and will not show tasks as consuming no CPU usage when they actually are. Thus, -+the amount of CPU reported as being used by BFS will more accurately represent -+how much CPU the task itself is using (as is shown for example by the 'time' -+application), so the reported values may be quite different to other schedulers. -+Values reported as the 'load' are more prone to problems with this design, but -+per process values are closer to real usage. When comparing throughput of BFS -+to other designs, it is important to compare the actual completed work in terms -+of total wall clock time taken and total work done, rather than the reported -+"cpu usage". -+ -+ -+Con Kolivas Fri Aug 27 2010 -diff -Nur a/Documentation/scheduler/sched-MuQSS.txt b/Documentation/scheduler/sched-MuQSS.txt ---- a/Documentation/scheduler/sched-MuQSS.txt 1970-01-01 01:00:00.000000000 +0100 -+++ b/Documentation/scheduler/sched-MuQSS.txt 2019-01-05 20:22:51.089998199 +0000 -@@ -0,0 +1,347 @@ -+MuQSS - The Multiple Queue Skiplist Scheduler by Con Kolivas. -+ -+MuQSS is a per-cpu runqueue variant of the original BFS scheduler with -+one 8 level skiplist per runqueue, and fine grained locking for much more -+scalability. -+ -+ -+Goals. -+ -+The goal of the Multiple Queue Skiplist Scheduler, referred to as MuQSS from -+here on (pronounced mux) is to completely do away with the complex designs of -+the past for the cpu process scheduler and instead implement one that is very -+simple in basic design. The main focus of MuQSS is to achieve excellent desktop -+interactivity and responsiveness without heuristics and tuning knobs that are -+difficult to understand, impossible to model and predict the effect of, and when -+tuned to one workload cause massive detriment to another, while still being -+scalable to many CPUs and processes. -+ -+ -+Design summary. -+ -+MuQSS is best described as per-cpu multiple runqueue, O(log n) insertion, O(1) -+lookup, earliest effective virtual deadline first tickless design, loosely based -+on EEVDF (earliest eligible virtual deadline first) and my previous Staircase -+Deadline scheduler, and evolved from the single runqueue O(n) BFS scheduler. -+Each component shall be described in order to understand the significance of, -+and reasoning for it. -+ -+ -+Design reasoning. -+ -+In BFS, the use of a single runqueue across all CPUs meant that each CPU would -+need to scan the entire runqueue looking for the process with the earliest -+deadline and schedule that next, regardless of which CPU it originally came -+from. This made BFS deterministic with respect to latency and provided -+guaranteed latencies dependent on number of processes and CPUs. The single -+runqueue, however, meant that all CPUs would compete for the single lock -+protecting it, which would lead to increasing lock contention as the number of -+CPUs rose and appeared to limit scalability of common workloads beyond 16 -+logical CPUs. Additionally, the O(n) lookup of the runqueue list obviously -+increased overhead proportionate to the number of queued proecesses and led to -+cache thrashing while iterating over the linked list. -+ -+MuQSS is an evolution of BFS, designed to maintain the same scheduling -+decision mechanism and be virtually deterministic without relying on the -+constrained design of the single runqueue by splitting out the single runqueue -+to be per-CPU and use skiplists instead of linked lists. -+ -+The original reason for going back to a single runqueue design for BFS was that -+once multiple runqueues are introduced, per-CPU or otherwise, there will be -+complex interactions as each runqueue will be responsible for the scheduling -+latency and fairness of the tasks only on its own runqueue, and to achieve -+fairness and low latency across multiple CPUs, any advantage in throughput of -+having CPU local tasks causes other disadvantages. This is due to requiring a -+very complex balancing system to at best achieve some semblance of fairness -+across CPUs and can only maintain relatively low latency for tasks bound to the -+same CPUs, not across them. To increase said fairness and latency across CPUs, -+the advantage of local runqueue locking, which makes for better scalability, is -+lost due to having to grab multiple locks. -+ -+MuQSS works around the problems inherent in multiple runqueue designs by -+making its skip lists priority ordered and through novel use of lockless -+examination of each other runqueue it can decide if it should take the earliest -+deadline task from another runqueue for latency reasons, or for CPU balancing -+reasons. It still does not have a balancing system, choosing to allow the -+next task scheduling decision and task wakeup CPU choice to allow balancing to -+happen by virtue of its choices. -+ -+ -+Design details. -+ -+Custom skip list implementation: -+ -+To avoid the overhead of building up and tearing down skip list structures, -+the variant used by MuQSS has a number of optimisations making it specific for -+its use case in the scheduler. It uses static arrays of 8 'levels' instead of -+building up and tearing down structures dynamically. This makes each runqueue -+only scale O(log N) up to 64k tasks. However as there is one runqueue per CPU -+it means that it scales O(log N) up to 64k x number of logical CPUs which is -+far beyond the realistic task limits each CPU could handle. By being 8 levels -+it also makes the array exactly one cacheline in size. Additionally, each -+skip list node is bidirectional making insertion and removal amortised O(1), -+being O(k) where k is 1-8. Uniquely, we are only ever interested in the very -+first entry in each list at all times with MuQSS, so there is never a need to -+do a search and thus look up is always O(1). In interactive mode, the queues -+will be searched beyond their first entry if the first task is not suitable -+for affinity or SMT nice reasons. -+ -+Task insertion: -+ -+MuQSS inserts tasks into a per CPU runqueue as an O(log N) insertion into -+a custom skip list as described above (based on the original design by William -+Pugh). Insertion is ordered in such a way that there is never a need to do a -+search by ordering tasks according to static priority primarily, and then -+virtual deadline at the time of insertion. -+ -+Niffies: -+ -+Niffies are a monotonic forward moving timer not unlike the "jiffies" but are -+of nanosecond resolution. Niffies are calculated per-runqueue from the high -+resolution TSC timers, and in order to maintain fairness are synchronised -+between CPUs whenever both runqueues are locked concurrently. -+ -+Virtual deadline: -+ -+The key to achieving low latency, scheduling fairness, and "nice level" -+distribution in MuQSS is entirely in the virtual deadline mechanism. The one -+tunable in MuQSS is the rr_interval, or "round robin interval". This is the -+maximum time two SCHED_OTHER (or SCHED_NORMAL, the common scheduling policy) -+tasks of the same nice level will be running for, or looking at it the other -+way around, the longest duration two tasks of the same nice level will be -+delayed for. When a task requests cpu time, it is given a quota (time_slice) -+equal to the rr_interval and a virtual deadline. The virtual deadline is -+offset from the current time in niffies by this equation: -+ -+ niffies + (prio_ratio * rr_interval) -+ -+The prio_ratio is determined as a ratio compared to the baseline of nice -20 -+and increases by 10% per nice level. The deadline is a virtual one only in that -+no guarantee is placed that a task will actually be scheduled by this time, but -+it is used to compare which task should go next. There are three components to -+how a task is next chosen. First is time_slice expiration. If a task runs out -+of its time_slice, it is descheduled, the time_slice is refilled, and the -+deadline reset to that formula above. Second is sleep, where a task no longer -+is requesting CPU for whatever reason. The time_slice and deadline are _not_ -+adjusted in this case and are just carried over for when the task is next -+scheduled. Third is preemption, and that is when a newly waking task is deemed -+higher priority than a currently running task on any cpu by virtue of the fact -+that it has an earlier virtual deadline than the currently running task. The -+earlier deadline is the key to which task is next chosen for the first and -+second cases. -+ -+The CPU proportion of different nice tasks works out to be approximately the -+ -+ (prio_ratio difference)^2 -+ -+The reason it is squared is that a task's deadline does not change while it is -+running unless it runs out of time_slice. Thus, even if the time actually -+passes the deadline of another task that is queued, it will not get CPU time -+unless the current running task deschedules, and the time "base" (niffies) is -+constantly moving. -+ -+Task lookup: -+ -+As tasks are already pre-ordered according to anticipated scheduling order in -+the skip lists, lookup for the next suitable task per-runqueue is always a -+matter of simply selecting the first task in the 0th level skip list entry. -+In order to maintain optimal latency and fairness across CPUs, MuQSS does a -+novel examination of every other runqueue in cache locality order, choosing the -+best task across all runqueues. This provides near-determinism of how long any -+task across the entire system may wait before receiving CPU time. The other -+runqueues are first examine lockless and then trylocked to minimise the -+potential lock contention if they are likely to have a suitable better task. -+Each other runqueue lock is only held for as long as it takes to examine the -+entry for suitability. In "interactive" mode, the default setting, MuQSS will -+look for the best deadline task across all CPUs, while in !interactive mode, -+it will only select a better deadline task from another CPU if it is more -+heavily laden than the current one. -+ -+Lookup is therefore O(k) where k is number of CPUs. -+ -+ -+Latency. -+ -+Through the use of virtual deadlines to govern the scheduling order of normal -+tasks, queue-to-activation latency per runqueue is guaranteed to be bound by -+the rr_interval tunable which is set to 6ms by default. This means that the -+longest a CPU bound task will wait for more CPU is proportional to the number -+of running tasks and in the common case of 0-2 running tasks per CPU, will be -+under the 7ms threshold for human perception of jitter. Additionally, as newly -+woken tasks will have an early deadline from their previous runtime, the very -+tasks that are usually latency sensitive will have the shortest interval for -+activation, usually preempting any existing CPU bound tasks. -+ -+Tickless expiry: -+ -+A feature of MuQSS is that it is not tied to the resolution of the chosen tick -+rate in Hz, instead depending entirely on the high resolution timers where -+possible for sub-millisecond accuracy on timeouts regarless of the underlying -+tick rate. This allows MuQSS to be run with the low overhead of low Hz rates -+such as 100 by default, benefiting from the improved throughput and lower -+power usage it provides. Another advantage of this approach is that in -+combination with the Full No HZ option, which disables ticks on running task -+CPUs instead of just idle CPUs, the tick can be disabled at all times -+regardless of how many tasks are running instead of being limited to just one -+running task. Note that this option is NOT recommended for regular desktop -+users. -+ -+ -+Scalability and balancing. -+ -+Unlike traditional approaches where balancing is a combination of CPU selection -+at task wakeup and intermittent balancing based on a vast array of rules set -+according to architecture, busyness calculations and special case management, -+MuQSS indirectly balances on the fly at task wakeup and next task selection. -+During initialisation, MuQSS creates a cache coherency ordered list of CPUs for -+each logical CPU and uses this to aid task/CPU selection when CPUs are busy. -+Additionally it selects any idle CPUs, if they are available, at any time over -+busy CPUs according to the following preference: -+ -+ * Same thread, idle or busy cache, idle or busy threads -+ * Other core, same cache, idle or busy cache, idle threads. -+ * Same node, other CPU, idle cache, idle threads. -+ * Same node, other CPU, busy cache, idle threads. -+ * Other core, same cache, busy threads. -+ * Same node, other CPU, busy threads. -+ * Other node, other CPU, idle cache, idle threads. -+ * Other node, other CPU, busy cache, idle threads. -+ * Other node, other CPU, busy threads. -+ -+Mux is therefore SMT, MC and Numa aware without the need for extra -+intermittent balancing to maintain CPUs busy and make the most of cache -+coherency. -+ -+ -+Features -+ -+As the initial prime target audience for MuQSS was the average desktop user, it -+was designed to not need tweaking, tuning or have features set to obtain benefit -+from it. Thus the number of knobs and features has been kept to an absolute -+minimum and should not require extra user input for the vast majority of cases. -+There are 3 optional tunables, and 2 extra scheduling policies. The rr_interval, -+interactive, and iso_cpu tunables, and the SCHED_ISO and SCHED_IDLEPRIO -+policies. In addition to this, MuQSS also uses sub-tick accounting. What MuQSS -+does _not_ now feature is support for CGROUPS. The average user should neither -+need to know what these are, nor should they need to be using them to have good -+desktop behaviour. However since some applications refuse to work without -+cgroups, one can enable them with MuQSS as a stub and the filesystem will be -+created which will allow the applications to work. -+ -+rr_interval: -+ -+ /proc/sys/kernel/rr_interval -+ -+The value is in milliseconds, and the default value is set to 6. Valid values -+are from 1 to 1000 Decreasing the value will decrease latencies at the cost of -+decreasing throughput, while increasing it will improve throughput, but at the -+cost of worsening latencies. It is based on the fact that humans can detect -+jitter at approximately 7ms, so aiming for much lower latencies is pointless -+under most circumstances. It is worth noting this fact when comparing the -+latency performance of MuQSS to other schedulers. Worst case latencies being -+higher than 7ms are far worse than average latencies not being in the -+microsecond range. -+ -+interactive: -+ -+ /proc/sys/kernel/interactive -+ -+The value is a simple boolean of 1 for on and 0 for off and is set to on by -+default. Disabling this will disable the near-determinism of MuQSS when -+selecting the next task by not examining all CPUs for the earliest deadline -+task, or which CPU to wake to, instead prioritising CPU balancing for improved -+throughput. Latency will still be bound by rr_interval, but on a per-CPU basis -+instead of across the whole system. -+ -+Isochronous scheduling: -+ -+Isochronous scheduling is a unique scheduling policy designed to provide -+near-real-time performance to unprivileged (ie non-root) users without the -+ability to starve the machine indefinitely. Isochronous tasks (which means -+"same time") are set using, for example, the schedtool application like so: -+ -+ schedtool -I -e amarok -+ -+This will start the audio application "amarok" as SCHED_ISO. How SCHED_ISO works -+is that it has a priority level between true realtime tasks and SCHED_NORMAL -+which would allow them to preempt all normal tasks, in a SCHED_RR fashion (ie, -+if multiple SCHED_ISO tasks are running, they purely round robin at rr_interval -+rate). However if ISO tasks run for more than a tunable finite amount of time, -+they are then demoted back to SCHED_NORMAL scheduling. This finite amount of -+time is the percentage of CPU available per CPU, configurable as a percentage in -+the following "resource handling" tunable (as opposed to a scheduler tunable): -+ -+iso_cpu: -+ -+ /proc/sys/kernel/iso_cpu -+ -+and is set to 70% by default. It is calculated over a rolling 5 second average -+Because it is the total CPU available, it means that on a multi CPU machine, it -+is possible to have an ISO task running as realtime scheduling indefinitely on -+just one CPU, as the other CPUs will be available. Setting this to 100 is the -+equivalent of giving all users SCHED_RR access and setting it to 0 removes the -+ability to run any pseudo-realtime tasks. -+ -+A feature of MuQSS is that it detects when an application tries to obtain a -+realtime policy (SCHED_RR or SCHED_FIFO) and the caller does not have the -+appropriate privileges to use those policies. When it detects this, it will -+give the task SCHED_ISO policy instead. Thus it is transparent to the user. -+ -+ -+Idleprio scheduling: -+ -+Idleprio scheduling is a scheduling policy designed to give out CPU to a task -+_only_ when the CPU would be otherwise idle. The idea behind this is to allow -+ultra low priority tasks to be run in the background that have virtually no -+effect on the foreground tasks. This is ideally suited to distributed computing -+clients (like setiathome, folding, mprime etc) but can also be used to start a -+video encode or so on without any slowdown of other tasks. To avoid this policy -+from grabbing shared resources and holding them indefinitely, if it detects a -+state where the task is waiting on I/O, the machine is about to suspend to ram -+and so on, it will transiently schedule them as SCHED_NORMAL. Once a task has -+been scheduled as IDLEPRIO, it cannot be put back to SCHED_NORMAL without -+superuser privileges since it is effectively a lower scheduling policy. Tasks -+can be set to start as SCHED_IDLEPRIO with the schedtool command like so: -+ -+schedtool -D -e ./mprime -+ -+Subtick accounting: -+ -+It is surprisingly difficult to get accurate CPU accounting, and in many cases, -+the accounting is done by simply determining what is happening at the precise -+moment a timer tick fires off. This becomes increasingly inaccurate as the timer -+tick frequency (HZ) is lowered. It is possible to create an application which -+uses almost 100% CPU, yet by being descheduled at the right time, records zero -+CPU usage. While the main problem with this is that there are possible security -+implications, it is also difficult to determine how much CPU a task really does -+use. Mux uses sub-tick accounting from the TSC clock to determine real CPU -+usage. Thus, the amount of CPU reported as being used by MuQSS will more -+accurately represent how much CPU the task itself is using (as is shown for -+example by the 'time' application), so the reported values may be quite -+different to other schedulers. When comparing throughput of MuQSS to other -+designs, it is important to compare the actual completed work in terms of total -+wall clock time taken and total work done, rather than the reported "cpu usage". -+ -+Symmetric MultiThreading (SMT) aware nice: -+ -+SMT, a.k.a. hyperthreading, is a very common feature on modern CPUs. While the -+logical CPU count rises by adding thread units to each CPU core, allowing more -+than one task to be run simultaneously on the same core, the disadvantage of it -+is that the CPU power is shared between the tasks, not summating to the power -+of two CPUs. The practical upshot of this is that two tasks running on -+separate threads of the same core run significantly slower than if they had one -+core each to run on. While smart CPU selection allows each task to have a core -+to itself whenever available (as is done on MuQSS), it cannot offset the -+slowdown that occurs when the cores are all loaded and only a thread is left. -+Most of the time this is harmless as the CPU is effectively overloaded at this -+point and the extra thread is of benefit. However when running a niced task in -+the presence of an un-niced task (say nice 19 v nice 0), the nice task gets -+precisely the same amount of CPU power as the unniced one. MuQSS has an -+optional configuration feature known as SMT-NICE which selectively idles the -+secondary niced thread for a period proportional to the nice difference, -+allowing CPU distribution according to nice level to be maintained, at the -+expense of a small amount of extra overhead. If this is configured in on a -+machine without SMT threads, the overhead is minimal. -+ -+ -+Con Kolivas Sat, 29th October 2016 -diff -Nur a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt ---- a/Documentation/sysctl/kernel.txt 2019-01-05 20:17:13.829237906 +0000 -+++ b/Documentation/sysctl/kernel.txt 2019-01-05 20:22:51.089998199 +0000 -@@ -39,6 +39,7 @@ - - hung_task_timeout_secs - - hung_task_warnings - - kexec_load_disabled -+- iso_cpu - - kptr_restrict - - l2cr [ PPC only ] - - modprobe ==> Documentation/debugging-modules.txt -@@ -73,6 +74,7 @@ - - randomize_va_space - - real-root-dev ==> Documentation/admin-guide/initrd.rst - - reboot-cmd [ SPARC only ] -+- rr_interval - - rtsig-max - - rtsig-nr - - seccomp/ ==> Documentation/userspace-api/seccomp_filter.rst -@@ -95,6 +97,7 @@ - - unknown_nmi_panic - - watchdog - - watchdog_thresh -+- yield_type - - version - - ============================================================== -@@ -397,6 +400,16 @@ - - ============================================================== - -+iso_cpu: (MuQSS CPU scheduler only). -+ -+This sets the percentage cpu that the unprivileged SCHED_ISO tasks can -+run effectively at realtime priority, averaged over a rolling five -+seconds over the -whole- system, meaning all cpus. -+ -+Set to 70 (percent) by default. -+ -+============================================================== -+ - l2cr: (PPC only) - - This flag controls the L2 cache of G3 processor boards. If -@@ -823,6 +836,20 @@ - - ============================================================== - -+rr_interval: (MuQSS CPU scheduler only) -+ -+This is the smallest duration that any cpu process scheduling unit -+will run for. Increasing this value can increase throughput of cpu -+bound tasks substantially but at the expense of increased latencies -+overall. Conversely decreasing it will decrease average and maximum -+latencies but at the expense of throughput. This value is in -+milliseconds and the default value chosen depends on the number of -+cpus available at scheduler initialisation with a minimum of 6. -+ -+Valid values are from 1-1000. -+ -+============================================================== -+ - rtsig-max & rtsig-nr: - - The file rtsig-max can be used to tune the maximum number -@@ -1081,3 +1108,13 @@ - tunable to zero will disable lockup detection altogether. - - ============================================================== -+ -+yield_type: (MuQSS CPU scheduler only) -+ -+This determines what type of yield calls to sched_yield will perform. -+ -+ 0: No yield. -+ 1: Yield only to better priority/deadline tasks. (default) -+ 2: Expire timeslice and recalculate deadline. -+ -+============================================================== -diff -Nur a/fs/proc/base.c b/fs/proc/base.c ---- a/fs/proc/base.c 2018-12-21 13:13:19.000000000 +0000 -+++ b/fs/proc/base.c 2019-01-05 20:22:51.089998199 +0000 -@@ -481,7 +481,7 @@ - seq_printf(m, "0 0 0\n"); - else - seq_printf(m, "%llu %llu %lu\n", -- (unsigned long long)task->se.sum_exec_runtime, -+ (unsigned long long)tsk_seruntime(task), - (unsigned long long)task->sched_info.run_delay, - task->sched_info.pcount); - -diff -Nur a/include/linux/init_task.h b/include/linux/init_task.h ---- a/include/linux/init_task.h 2018-12-21 13:13:19.000000000 +0000 -+++ b/include/linux/init_task.h 2019-01-05 20:22:51.089998199 +0000 -@@ -172,8 +172,6 @@ - # define INIT_VTIME(tsk) - #endif - --#define INIT_TASK_COMM "swapper" -- - #ifdef CONFIG_RT_MUTEXES - # define INIT_RT_MUTEXES(tsk) \ - .pi_waiters = RB_ROOT_CACHED, \ -@@ -223,6 +221,80 @@ - * INIT_TASK is used to set up the first task table, touch at - * your own risk!. Base=0, limit=0x1fffff (=2MB) - */ -+#ifdef CONFIG_SCHED_MUQSS -+#define INIT_TASK_COMM "MuQSS" -+#define INIT_TASK(tsk) \ -+{ \ -+ INIT_TASK_TI(tsk) \ -+ .state = 0, \ -+ .stack = init_stack, \ -+ .usage = ATOMIC_INIT(2), \ -+ .flags = PF_KTHREAD, \ -+ .prio = NORMAL_PRIO, \ -+ .static_prio = MAX_PRIO-20, \ -+ .normal_prio = NORMAL_PRIO, \ -+ .deadline = 0, \ -+ .policy = SCHED_NORMAL, \ -+ .cpus_allowed = CPU_MASK_ALL, \ -+ .mm = NULL, \ -+ .active_mm = &init_mm, \ -+ .restart_block = { \ -+ .fn = do_no_restart_syscall, \ -+ }, \ -+ .time_slice = 1000000, \ -+ .tasks = LIST_HEAD_INIT(tsk.tasks), \ -+ INIT_PUSHABLE_TASKS(tsk) \ -+ .ptraced = LIST_HEAD_INIT(tsk.ptraced), \ -+ .ptrace_entry = LIST_HEAD_INIT(tsk.ptrace_entry), \ -+ .real_parent = &tsk, \ -+ .parent = &tsk, \ -+ .children = LIST_HEAD_INIT(tsk.children), \ -+ .sibling = LIST_HEAD_INIT(tsk.sibling), \ -+ .group_leader = &tsk, \ -+ RCU_POINTER_INITIALIZER(real_cred, &init_cred), \ -+ RCU_POINTER_INITIALIZER(cred, &init_cred), \ -+ .comm = INIT_TASK_COMM, \ -+ .thread = INIT_THREAD, \ -+ .fs = &init_fs, \ -+ .files = &init_files, \ -+ .signal = &init_signals, \ -+ .sighand = &init_sighand, \ -+ .nsproxy = &init_nsproxy, \ -+ .pending = { \ -+ .list = LIST_HEAD_INIT(tsk.pending.list), \ -+ .signal = {{0}}}, \ -+ .blocked = {{0}}, \ -+ .alloc_lock = __SPIN_LOCK_UNLOCKED(tsk.alloc_lock), \ -+ .journal_info = NULL, \ -+ INIT_CPU_TIMERS(tsk) \ -+ .pi_lock = __RAW_SPIN_LOCK_UNLOCKED(tsk.pi_lock), \ -+ .timer_slack_ns = 50000, /* 50 usec default slack */ \ -+ .pids = { \ -+ [PIDTYPE_PID] = INIT_PID_LINK(PIDTYPE_PID), \ -+ [PIDTYPE_PGID] = INIT_PID_LINK(PIDTYPE_PGID), \ -+ [PIDTYPE_SID] = INIT_PID_LINK(PIDTYPE_SID), \ -+ }, \ -+ .thread_group = LIST_HEAD_INIT(tsk.thread_group), \ -+ .thread_node = LIST_HEAD_INIT(init_signals.thread_head), \ -+ INIT_IDS \ -+ INIT_PERF_EVENTS(tsk) \ -+ INIT_TRACE_IRQFLAGS \ -+ INIT_LOCKDEP \ -+ INIT_FTRACE_GRAPH \ -+ INIT_TRACE_RECURSION \ -+ INIT_TASK_RCU_PREEMPT(tsk) \ -+ INIT_TASK_RCU_TASKS(tsk) \ -+ INIT_CPUSET_SEQ(tsk) \ -+ INIT_RT_MUTEXES(tsk) \ -+ INIT_PREV_CPUTIME(tsk) \ -+ INIT_VTIME(tsk) \ -+ INIT_NUMA_BALANCING(tsk) \ -+ INIT_KASAN(tsk) \ -+ INIT_LIVEPATCH(tsk) \ -+ INIT_TASK_SECURITY \ -+} -+#else /* CONFIG_SCHED_MUQSS */ -+#define INIT_TASK_COMM "swapper" - #define INIT_TASK(tsk) \ - { \ - INIT_TASK_TI(tsk) \ -@@ -300,7 +372,7 @@ - INIT_LIVEPATCH(tsk) \ - INIT_TASK_SECURITY \ - } -- -+#endif /* CONFIG_SCHED_MUQSS */ - - /* Attach to the init_task data structure for proper alignment */ - #define __init_task_data __attribute__((__section__(".data..init_task"))) -diff -Nur a/include/linux/ioprio.h b/include/linux/ioprio.h ---- a/include/linux/ioprio.h 2018-12-21 13:13:19.000000000 +0000 -+++ b/include/linux/ioprio.h 2019-01-05 20:22:51.089998199 +0000 -@@ -52,6 +52,8 @@ - */ - static inline int task_nice_ioprio(struct task_struct *task) - { -+ if (iso_task(task)) -+ return 0; - return (task_nice(task) + 20) / 5; - } - -diff -Nur a/include/linux/sched/nohz.h b/include/linux/sched/nohz.h ---- a/include/linux/sched/nohz.h 2018-12-21 13:13:19.000000000 +0000 -+++ b/include/linux/sched/nohz.h 2019-01-05 20:22:51.089998199 +0000 -@@ -6,7 +6,7 @@ - * This is the interface between the scheduler and nohz/dynticks: - */ - --#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON) -+#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON) && !defined(CONFIG_SCHED_MUQSS) - extern void cpu_load_update_nohz_start(void); - extern void cpu_load_update_nohz_stop(void); - #else -@@ -23,7 +23,7 @@ - static inline void set_cpu_sd_state_idle(void) { } - #endif - --#ifdef CONFIG_NO_HZ_COMMON -+#if defined(CONFIG_NO_HZ_COMMON) && !defined(CONFIG_SCHED_MUQSS) - void calc_load_nohz_start(void); - void calc_load_nohz_stop(void); - #else -diff -Nur a/include/linux/sched/prio.h b/include/linux/sched/prio.h ---- a/include/linux/sched/prio.h 2018-12-21 13:13:19.000000000 +0000 -+++ b/include/linux/sched/prio.h 2019-01-05 20:22:51.089998199 +0000 -@@ -20,8 +20,20 @@ - */ - - #define MAX_USER_RT_PRIO 100 -+ -+#ifdef CONFIG_SCHED_MUQSS -+/* Note different MAX_RT_PRIO */ -+#define MAX_RT_PRIO (MAX_USER_RT_PRIO + 1) -+ -+#define ISO_PRIO (MAX_RT_PRIO) -+#define NORMAL_PRIO (MAX_RT_PRIO + 1) -+#define IDLE_PRIO (MAX_RT_PRIO + 2) -+#define PRIO_LIMIT ((IDLE_PRIO) + 1) -+#else /* CONFIG_SCHED_MUQSS */ - #define MAX_RT_PRIO MAX_USER_RT_PRIO - -+#endif /* CONFIG_SCHED_MUQSS */ -+ - #define MAX_PRIO (MAX_RT_PRIO + NICE_WIDTH) - #define DEFAULT_PRIO (MAX_RT_PRIO + NICE_WIDTH / 2) - -diff -Nur a/include/linux/sched/task.h b/include/linux/sched/task.h ---- a/include/linux/sched/task.h 2018-12-21 13:13:19.000000000 +0000 -+++ b/include/linux/sched/task.h 2019-01-05 20:22:51.089998199 +0000 -@@ -80,7 +80,7 @@ - extern void free_task(struct task_struct *tsk); - - /* sched_exec is called by processes performing an exec */ --#ifdef CONFIG_SMP -+#if defined(CONFIG_SMP) && !defined(CONFIG_SCHED_MUQSS) - extern void sched_exec(void); - #else - #define sched_exec() {} -diff -Nur a/include/linux/sched.h b/include/linux/sched.h ---- a/include/linux/sched.h 2018-12-21 13:13:19.000000000 +0000 -+++ b/include/linux/sched.h 2019-01-05 20:22:51.089998199 +0000 -@@ -27,6 +27,9 @@ - #include - #include - #include -+#ifdef CONFIG_SCHED_MUQSS -+#include -+#endif - - /* task_struct member predeclarations (sorted alphabetically): */ - struct audit_context; -@@ -579,9 +582,11 @@ - unsigned int flags; - unsigned int ptrace; - -+#if defined(CONFIG_SMP) || defined(CONFIG_SCHED_MUQSS) -+ int on_cpu; -+#endif - #ifdef CONFIG_SMP - struct llist_node wake_entry; -- int on_cpu; - #ifdef CONFIG_THREAD_INFO_IN_TASK - /* Current CPU: */ - unsigned int cpu; -@@ -598,10 +603,25 @@ - int static_prio; - int normal_prio; - unsigned int rt_priority; -+#ifdef CONFIG_SCHED_MUQSS -+ int time_slice; -+ u64 deadline; -+ skiplist_node node; /* Skip list node */ -+ u64 last_ran; -+ u64 sched_time; /* sched_clock time spent running */ -+#ifdef CONFIG_SMT_NICE -+ int smt_bias; /* Policy/nice level bias across smt siblings */ -+#endif -+#ifdef CONFIG_HOTPLUG_CPU -+ bool zerobound; /* Bound to CPU0 for hotplug */ -+#endif -+ unsigned long rt_timeout; -+#else /* CONFIG_SCHED_MUQSS */ - - const struct sched_class *sched_class; - struct sched_entity se; - struct sched_rt_entity rt; -+#endif - #ifdef CONFIG_CGROUP_SCHED - struct task_group *sched_task_group; - #endif -@@ -751,6 +771,10 @@ - u64 utimescaled; - u64 stimescaled; - #endif -+#ifdef CONFIG_SCHED_MUQSS -+ /* Unbanked cpu time */ -+ unsigned long utime_ns, stime_ns; -+#endif - u64 gtime; - struct prev_cputime prev_cputime; - #ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN -@@ -1155,6 +1179,40 @@ - */ - }; - -+#ifdef CONFIG_SCHED_MUQSS -+#define tsk_seruntime(t) ((t)->sched_time) -+#define tsk_rttimeout(t) ((t)->rt_timeout) -+ -+static inline void tsk_cpus_current(struct task_struct *p) -+{ -+} -+ -+void print_scheduler_version(void); -+ -+static inline bool iso_task(struct task_struct *p) -+{ -+ return (p->policy == SCHED_ISO); -+} -+#else /* CFS */ -+#define tsk_seruntime(t) ((t)->se.sum_exec_runtime) -+#define tsk_rttimeout(t) ((t)->rt.timeout) -+ -+static inline void tsk_cpus_current(struct task_struct *p) -+{ -+ p->nr_cpus_allowed = current->nr_cpus_allowed; -+} -+ -+static inline void print_scheduler_version(void) -+{ -+ printk(KERN_INFO "CFS CPU scheduler.\n"); -+} -+ -+static inline bool iso_task(struct task_struct *p) -+{ -+ return false; -+} -+#endif /* CONFIG_SCHED_MUQSS */ -+ - static inline struct pid *task_pid(struct task_struct *task) - { - return task->pids[PIDTYPE_PID].pid; -diff -Nur a/include/linux/skip_list.h b/include/linux/skip_list.h ---- a/include/linux/skip_list.h 1970-01-01 01:00:00.000000000 +0100 -+++ b/include/linux/skip_list.h 2019-01-05 20:22:51.089998199 +0000 -@@ -0,0 +1,33 @@ -+#ifndef _LINUX_SKIP_LISTS_H -+#define _LINUX_SKIP_LISTS_H -+typedef u64 keyType; -+typedef void *valueType; -+ -+typedef struct nodeStructure skiplist_node; -+ -+struct nodeStructure { -+ int level; /* Levels in this structure */ -+ keyType key; -+ valueType value; -+ skiplist_node *next[8]; -+ skiplist_node *prev[8]; -+}; -+ -+typedef struct listStructure { -+ int entries; -+ int level; /* Maximum level of the list -+ (1 more than the number of levels in the list) */ -+ skiplist_node *header; /* pointer to header */ -+} skiplist; -+ -+void skiplist_init(skiplist_node *slnode); -+skiplist *new_skiplist(skiplist_node *slnode); -+void free_skiplist(skiplist *l); -+void skiplist_node_init(skiplist_node *node); -+void skiplist_insert(skiplist *l, skiplist_node *node, keyType key, valueType value, unsigned int randseed); -+void skiplist_delete(skiplist *l, skiplist_node *node); -+ -+static inline bool skiplist_node_empty(skiplist_node *node) { -+ return (!node->next[0]); -+} -+#endif /* _LINUX_SKIP_LISTS_H */ -diff -Nur a/include/uapi/linux/sched.h b/include/uapi/linux/sched.h ---- a/include/uapi/linux/sched.h 2018-12-21 13:13:19.000000000 +0000 -+++ b/include/uapi/linux/sched.h 2019-01-05 20:22:51.089998199 +0000 -@@ -37,9 +37,16 @@ - #define SCHED_FIFO 1 - #define SCHED_RR 2 - #define SCHED_BATCH 3 --/* SCHED_ISO: reserved but not implemented yet */ -+/* SCHED_ISO: Implemented on MuQSS only */ - #define SCHED_IDLE 5 -+#ifdef CONFIG_SCHED_MUQSS -+#define SCHED_ISO 4 -+#define SCHED_IDLEPRIO SCHED_IDLE -+#define SCHED_MAX (SCHED_IDLEPRIO) -+#define SCHED_RANGE(policy) ((policy) <= SCHED_MAX) -+#else /* CONFIG_SCHED_MUQSS */ - #define SCHED_DEADLINE 6 -+#endif /* CONFIG_SCHED_MUQSS */ - - /* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */ - #define SCHED_RESET_ON_FORK 0x40000000 -diff -Nur a/init/Kconfig b/init/Kconfig ---- a/init/Kconfig 2019-01-05 20:17:13.849238543 +0000 -+++ b/init/Kconfig 2019-01-05 20:22:51.089998199 +0000 -@@ -38,6 +38,18 @@ - - menu "General setup" - -+config SCHED_MUQSS -+ bool "MuQSS cpu scheduler" -+ select HIGH_RES_TIMERS -+ ---help--- -+ The Multiple Queue Skiplist Scheduler for excellent interactivity and -+ responsiveness on the desktop and highly scalable deterministic -+ low latency on any hardware. -+ -+ Say Y here. -+ default y -+ -+ - config BROKEN - bool - -@@ -621,6 +633,7 @@ - depends on ARCH_SUPPORTS_NUMA_BALANCING - depends on !ARCH_WANT_NUMA_VARIABLE_LOCALITY - depends on SMP && NUMA && MIGRATION -+ depends on !SCHED_MUQSS - help - This option adds support for automatic NUMA aware memory/task placement. - The mechanism is quite primitive and is based on migrating memory when -@@ -723,9 +736,13 @@ - help - This feature lets CPU scheduler recognize task groups and control CPU - bandwidth allocation to such task groups. It uses cgroups to group -- tasks. -+ tasks. In combination with MuQSS this is purely a STUB to create the -+ files associated with the CPU controller cgroup but most of the -+ controls do nothing. This is useful for working in environments and -+ with applications that will only work if this control group is -+ present. - --if CGROUP_SCHED -+if CGROUP_SCHED && !SCHED_MUQSS - config FAIR_GROUP_SCHED - bool "Group scheduling for SCHED_OTHER" - depends on CGROUP_SCHED -@@ -832,6 +849,7 @@ - - config CGROUP_CPUACCT - bool "Simple CPU accounting controller" -+ depends on !SCHED_MUQSS - help - Provides a simple controller for monitoring the - total CPU consumed by the tasks in a cgroup. -@@ -950,6 +968,7 @@ - - config SCHED_AUTOGROUP - bool "Automatic process group scheduling" -+ depends on !SCHED_MUQSS - select CGROUPS - select CGROUP_SCHED - select FAIR_GROUP_SCHED -diff -Nur a/init/main.c b/init/main.c ---- a/init/main.c 2018-12-21 13:13:19.000000000 +0000 -+++ b/init/main.c 2019-01-05 20:22:51.089998199 +0000 -@@ -841,7 +841,6 @@ - return ret; - } - -- - extern initcall_t __initcall_start[]; - extern initcall_t __initcall0_start[]; - extern initcall_t __initcall1_start[]; -@@ -1008,6 +1007,8 @@ - - rcu_end_inkernel_boot(); - -+ print_scheduler_version(); -+ - if (ramdisk_execute_command) { - ret = run_init_process(ramdisk_execute_command); - if (!ret) -diff -Nur a/kernel/delayacct.c b/kernel/delayacct.c ---- a/kernel/delayacct.c 2018-12-21 13:13:19.000000000 +0000 -+++ b/kernel/delayacct.c 2019-01-05 20:22:51.089998199 +0000 -@@ -115,7 +115,7 @@ - */ - t1 = tsk->sched_info.pcount; - t2 = tsk->sched_info.run_delay; -- t3 = tsk->se.sum_exec_runtime; -+ t3 = tsk_seruntime(tsk); - - d->cpu_count += t1; - -diff -Nur a/kernel/exit.c b/kernel/exit.c ---- a/kernel/exit.c 2018-12-21 13:13:19.000000000 +0000 -+++ b/kernel/exit.c 2019-01-05 20:22:51.089998199 +0000 -@@ -129,7 +129,7 @@ - sig->curr_target = next_thread(tsk); - } - -- add_device_randomness((const void*) &tsk->se.sum_exec_runtime, -+ add_device_randomness((const void*) &tsk_seruntime(tsk), - sizeof(unsigned long long)); - - /* -@@ -150,7 +150,7 @@ - sig->inblock += task_io_get_inblock(tsk); - sig->oublock += task_io_get_oublock(tsk); - task_io_accounting_add(&sig->ioac, &tsk->ioac); -- sig->sum_sched_runtime += tsk->se.sum_exec_runtime; -+ sig->sum_sched_runtime += tsk_seruntime(tsk); - sig->nr_threads--; - __unhash_process(tsk, group_dead); - write_sequnlock(&sig->stats_lock); -diff -Nur a/kernel/kthread.c b/kernel/kthread.c ---- a/kernel/kthread.c 2018-12-21 13:13:19.000000000 +0000 -+++ b/kernel/kthread.c 2019-01-05 20:22:51.099998516 +0000 -@@ -410,6 +410,34 @@ - } - EXPORT_SYMBOL(kthread_bind); - -+#if defined(CONFIG_SCHED_MUQSS) && defined(CONFIG_SMP) -+extern void __do_set_cpus_allowed(struct task_struct *p, const struct cpumask *new_mask); -+ -+/* -+ * new_kthread_bind is a special variant of __kthread_bind_mask. -+ * For new threads to work on muqss we want to call do_set_cpus_allowed -+ * without the task_cpu being set and the task rescheduled until they're -+ * rescheduled on their own so we call __do_set_cpus_allowed directly which -+ * only changes the cpumask. This is particularly important for smpboot threads -+ * to work. -+ */ -+static void new_kthread_bind(struct task_struct *p, unsigned int cpu) -+{ -+ unsigned long flags; -+ -+ if (WARN_ON(!wait_task_inactive(p, TASK_UNINTERRUPTIBLE))) -+ return; -+ -+ /* It's safe because the task is inactive. */ -+ raw_spin_lock_irqsave(&p->pi_lock, flags); -+ __do_set_cpus_allowed(p, cpumask_of(cpu)); -+ p->flags |= PF_NO_SETAFFINITY; -+ raw_spin_unlock_irqrestore(&p->pi_lock, flags); -+} -+#else -+#define new_kthread_bind(p, cpu) kthread_bind(p, cpu) -+#endif -+ - /** - * kthread_create_on_cpu - Create a cpu bound kthread - * @threadfn: the function to run until signal_pending(current). -@@ -431,7 +459,7 @@ - cpu); - if (IS_ERR(p)) - return p; -- kthread_bind(p, cpu); -+ new_kthread_bind(p, cpu); - /* CPU hotplug need to bind once again when unparking the thread. */ - set_bit(KTHREAD_IS_PER_CPU, &to_kthread(p)->flags); - to_kthread(p)->cpu = cpu; -diff -Nur a/kernel/livepatch/transition.c b/kernel/livepatch/transition.c ---- a/kernel/livepatch/transition.c 2018-12-21 13:13:19.000000000 +0000 -+++ b/kernel/livepatch/transition.c 2019-01-05 20:22:51.099998516 +0000 -@@ -277,6 +277,12 @@ - return 0; - } - -+#ifdef CONFIG_SCHED_MUQSS -+typedef unsigned long rq_flags_t; -+#else -+typedef struct rq_flags rq_flag_t; -+#endif -+ - /* - * Try to safely switch a task to the target patch state. If it's currently - * running, or it's sleeping on a to-be-patched or to-be-unpatched function, or -@@ -285,7 +291,7 @@ - static bool klp_try_switch_task(struct task_struct *task) - { - struct rq *rq; -- struct rq_flags flags; -+ rq_flags_t flags; - int ret; - bool success = false; - char err_buf[STACK_ERR_BUF_SIZE]; -diff -Nur a/kernel/Makefile b/kernel/Makefile ---- a/kernel/Makefile 2018-12-21 13:13:19.000000000 +0000 -+++ b/kernel/Makefile 2019-01-05 20:22:51.099998516 +0000 -@@ -10,7 +10,7 @@ - extable.o params.o \ - kthread.o sys_ni.o nsproxy.o \ - notifier.o ksysfs.o cred.o reboot.o \ -- async.o range.o smpboot.o ucount.o -+ async.o range.o smpboot.o ucount.o skip_list.o - - obj-$(CONFIG_MODULES) += kmod.o - obj-$(CONFIG_MULTIUSER) += groups.o -diff -Nur a/kernel/rcu/Kconfig b/kernel/rcu/Kconfig ---- a/kernel/rcu/Kconfig 2018-12-21 13:13:19.000000000 +0000 -+++ b/kernel/rcu/Kconfig 2019-01-05 20:22:51.099998516 +0000 -@@ -93,7 +93,7 @@ - config CONTEXT_TRACKING_FORCE - bool "Force context tracking" - depends on CONTEXT_TRACKING -- default y if !NO_HZ_FULL -+ default y if !NO_HZ_FULL && !SCHED_MUQSS - help - The major pre-requirement for full dynticks to work is to - support the context tracking subsystem. But there are also -diff -Nur a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c ---- a/kernel/sched/cpufreq_schedutil.c 2018-12-21 13:13:19.000000000 +0000 -+++ b/kernel/sched/cpufreq_schedutil.c 2019-01-05 20:22:51.099998516 +0000 -@@ -176,6 +176,17 @@ - return cpufreq_driver_resolve_freq(policy, freq); - } - -+#ifdef CONFIG_SCHED_MUQSS -+static void sugov_get_util(unsigned long *util, unsigned long *max, int cpu) -+{ -+ struct rq *rq = cpu_rq(cpu); -+ -+ *util = rq->load_avg; -+ if (*util > SCHED_CAPACITY_SCALE) -+ *util = SCHED_CAPACITY_SCALE; -+ *max = SCHED_CAPACITY_SCALE; -+} -+#else /* CONFIG_SCHED_MUQSS */ - static void sugov_get_util(unsigned long *util, unsigned long *max, int cpu) - { - struct rq *rq = cpu_rq(cpu); -@@ -186,6 +197,7 @@ - *util = min(rq->cfs.avg.util_avg, cfs_max); - *max = cfs_max; - } -+#endif /* CONFIG_SCHED_MUQSS */ - - static void sugov_set_iowait_boost(struct sugov_cpu *sg_cpu, u64 time, - unsigned int flags) -diff -Nur a/kernel/sched/cputime.c b/kernel/sched/cputime.c ---- a/kernel/sched/cputime.c 2018-12-21 13:13:19.000000000 +0000 -+++ b/kernel/sched/cputime.c 2019-01-05 20:22:51.099998516 +0000 -@@ -270,26 +270,6 @@ - return accounted; - } - --#ifdef CONFIG_64BIT --static inline u64 read_sum_exec_runtime(struct task_struct *t) --{ -- return t->se.sum_exec_runtime; --} --#else --static u64 read_sum_exec_runtime(struct task_struct *t) --{ -- u64 ns; -- struct rq_flags rf; -- struct rq *rq; -- -- rq = task_rq_lock(t, &rf); -- ns = t->se.sum_exec_runtime; -- task_rq_unlock(rq, t, &rf); -- -- return ns; --} --#endif -- - /* - * Accumulate raw cputime values of dead tasks (sig->[us]time) and live - * tasks (sum on group iteration) belonging to @tsk's group. -@@ -661,7 +641,7 @@ - void task_cputime_adjusted(struct task_struct *p, u64 *ut, u64 *st) - { - struct task_cputime cputime = { -- .sum_exec_runtime = p->se.sum_exec_runtime, -+ .sum_exec_runtime = tsk_seruntime(p), - }; - - task_cputime(p, &cputime.utime, &cputime.stime); -diff -Nur a/kernel/sched/idle.c b/kernel/sched/idle.c ---- a/kernel/sched/idle.c 2018-12-21 13:13:19.000000000 +0000 -+++ b/kernel/sched/idle.c 2019-01-05 20:22:51.099998516 +0000 -@@ -209,6 +209,9 @@ - */ - static void do_idle(void) - { -+ int cpu = smp_processor_id(); -+ bool pending = false; -+ - /* - * If the arch has a polling bit, we maintain an invariant: - * -@@ -220,13 +223,16 @@ - - __current_set_polling(); - quiet_vmstat(); -- tick_nohz_idle_enter(); -+ if (unlikely(softirq_pending(cpu))) -+ pending = true; -+ else -+ tick_nohz_idle_enter(); - - while (!need_resched()) { - check_pgt_cache(); - rmb(); - -- if (cpu_is_offline(smp_processor_id())) { -+ if (cpu_is_offline(cpu)) { - cpuhp_report_idle_dead(); - arch_cpu_idle_dead(); - } -@@ -255,7 +261,8 @@ - * an IPI to fold the state for us. - */ - preempt_set_need_resched(); -- tick_nohz_idle_exit(); -+ if (!pending) -+ tick_nohz_idle_exit(); - __current_clr_polling(); - - /* -diff -Nur a/kernel/sched/Makefile b/kernel/sched/Makefile ---- a/kernel/sched/Makefile 2018-12-21 13:13:19.000000000 +0000 -+++ b/kernel/sched/Makefile 2019-01-05 20:22:51.099998516 +0000 -@@ -16,14 +16,20 @@ - CFLAGS_core.o := $(PROFILING) -fno-omit-frame-pointer - endif - --obj-y += core.o loadavg.o clock.o cputime.o -+ifdef CONFIG_SCHED_MUQSS -+obj-y += MuQSS.o clock.o -+else -+obj-y += core.o loadavg.o clock.o - obj-y += idle_task.o fair.o rt.o deadline.o --obj-y += wait.o wait_bit.o swait.o completion.o idle.o --obj-$(CONFIG_SMP) += cpupri.o cpudeadline.o topology.o stop_task.o -+obj-$(CONFIG_SMP) += cpudeadline.o stop_task.o - obj-$(CONFIG_SCHED_AUTOGROUP) += autogroup.o --obj-$(CONFIG_SCHEDSTATS) += stats.o - obj-$(CONFIG_SCHED_DEBUG) += debug.o - obj-$(CONFIG_CGROUP_CPUACCT) += cpuacct.o -+endif -+obj-y += cputime.o -+obj-y += wait.o wait_bit.o swait.o completion.o idle.o -+obj-$(CONFIG_SMP) += cpupri.o topology.o -+obj-$(CONFIG_SCHEDSTATS) += stats.o - obj-$(CONFIG_CPU_FREQ) += cpufreq.o - obj-$(CONFIG_CPU_FREQ_GOV_SCHEDUTIL) += cpufreq_schedutil.o - obj-$(CONFIG_MEMBARRIER) += membarrier.o -diff -Nur a/kernel/sched/MuQSS.c b/kernel/sched/MuQSS.c ---- a/kernel/sched/MuQSS.c 1970-01-01 01:00:00.000000000 +0100 -+++ b/kernel/sched/MuQSS.c 2019-01-05 20:22:51.099998516 +0000 -@@ -0,0 +1,6923 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * kernel/sched/MuQSS.c, was kernel/sched.c -+ * -+ * Kernel scheduler and related syscalls -+ * -+ * Copyright (C) 1991-2002 Linus Torvalds -+ * -+ * 1996-12-23 Modified by Dave Grothe to fix bugs in semaphores and -+ * make semaphores SMP safe -+ * 1998-11-19 Implemented schedule_timeout() and related stuff -+ * by Andrea Arcangeli -+ * 2002-01-04 New ultra-scalable O(1) scheduler by Ingo Molnar: -+ * hybrid priority-list and round-robin design with -+ * an array-switch method of distributing timeslices -+ * and per-CPU runqueues. Cleanups and useful suggestions -+ * by Davide Libenzi, preemptible kernel bits by Robert Love. -+ * 2003-09-03 Interactivity tuning by Con Kolivas. -+ * 2004-04-02 Scheduler domains code by Nick Piggin -+ * 2007-04-15 Work begun on replacing all interactivity tuning with a -+ * fair scheduling design by Con Kolivas. -+ * 2007-05-05 Load balancing (smp-nice) and other improvements -+ * by Peter Williams -+ * 2007-05-06 Interactivity improvements to CFS by Mike Galbraith -+ * 2007-07-01 Group scheduling enhancements by Srivatsa Vaddagiri -+ * 2007-11-29 RT balancing improvements by Steven Rostedt, Gregory Haskins, -+ * Thomas Gleixner, Mike Kravetz -+ * 2009-08-13 Brainfuck deadline scheduling policy by Con Kolivas deletes -+ * a whole lot of those previous things. -+ * 2016-10-01 Multiple Queue Skiplist Scheduler scalable evolution of BFS -+ * scheduler by Con Kolivas. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#ifdef CONFIG_PARAVIRT -+#include -+#endif -+ -+#include "../workqueue_internal.h" -+#include "../smpboot.h" -+ -+#define CREATE_TRACE_POINTS -+#include -+ -+#include "MuQSS.h" -+ -+#define rt_prio(prio) unlikely((prio) < MAX_RT_PRIO) -+#define rt_task(p) rt_prio((p)->prio) -+#define batch_task(p) (unlikely((p)->policy == SCHED_BATCH)) -+#define is_rt_policy(policy) ((policy) == SCHED_FIFO || \ -+ (policy) == SCHED_RR) -+#define has_rt_policy(p) unlikely(is_rt_policy((p)->policy)) -+ -+#define is_idle_policy(policy) ((policy) == SCHED_IDLEPRIO) -+#define idleprio_task(p) unlikely(is_idle_policy((p)->policy)) -+#define task_running_idle(p) unlikely((p)->prio == IDLE_PRIO) -+ -+#define is_iso_policy(policy) ((policy) == SCHED_ISO) -+#define iso_task(p) unlikely(is_iso_policy((p)->policy)) -+#define task_running_iso(p) unlikely((p)->prio == ISO_PRIO) -+ -+#define rq_idle(rq) ((rq)->rq_prio == PRIO_LIMIT) -+ -+#define ISO_PERIOD (5 * HZ) -+ -+#define STOP_PRIO (MAX_RT_PRIO - 1) -+ -+/* -+ * Some helpers for converting to/from various scales. Use shifts to get -+ * approximate multiples of ten for less overhead. -+ */ -+#define JIFFIES_TO_NS(TIME) ((TIME) * (1073741824 / HZ)) -+#define JIFFY_NS (1073741824 / HZ) -+#define JIFFY_US (1048576 / HZ) -+#define NS_TO_JIFFIES(TIME) ((TIME) / JIFFY_NS) -+#define HALF_JIFFY_NS (1073741824 / HZ / 2) -+#define HALF_JIFFY_US (1048576 / HZ / 2) -+#define MS_TO_NS(TIME) ((TIME) << 20) -+#define MS_TO_US(TIME) ((TIME) << 10) -+#define NS_TO_MS(TIME) ((TIME) >> 20) -+#define NS_TO_US(TIME) ((TIME) >> 10) -+#define US_TO_NS(TIME) ((TIME) << 10) -+ -+#define RESCHED_US (100) /* Reschedule if less than this many μs left */ -+ -+void print_scheduler_version(void) -+{ -+ printk(KERN_INFO "MuQSS CPU scheduler v0.162 by Con Kolivas.\n"); -+} -+ -+/* -+ * This is the time all tasks within the same priority round robin. -+ * Value is in ms and set to a minimum of 6ms. -+ * Tunable via /proc interface. -+ */ -+int rr_interval __read_mostly = 6; -+ -+/* -+ * Tunable to choose whether to prioritise latency or throughput, simple -+ * binary yes or no -+ */ -+int sched_interactive __read_mostly = 1; -+ -+/* -+ * sched_iso_cpu - sysctl which determines the cpu percentage SCHED_ISO tasks -+ * are allowed to run five seconds as real time tasks. This is the total over -+ * all online cpus. -+ */ -+int sched_iso_cpu __read_mostly = 70; -+ -+/* -+ * sched_yield_type - Choose what sort of yield sched_yield will perform. -+ * 0: No yield. -+ * 1: Yield only to better priority/deadline tasks. (default) -+ * 2: Expire timeslice and recalculate deadline. -+ */ -+int sched_yield_type __read_mostly = 1; -+ -+/* -+ * The relative length of deadline for each priority(nice) level. -+ */ -+static int prio_ratios[NICE_WIDTH] __read_mostly; -+ -+/* -+ * The quota handed out to tasks of all priority levels when refilling their -+ * time_slice. -+ */ -+static inline int timeslice(void) -+{ -+ return MS_TO_US(rr_interval); -+} -+ -+#ifdef CONFIG_SMP -+static cpumask_t cpu_idle_map ____cacheline_aligned_in_smp; -+#endif -+ -+/* CPUs with isolated domains */ -+cpumask_var_t cpu_isolated_map; -+ -+DEFINE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues); -+#ifdef CONFIG_SMP -+struct rq *cpu_rq(int cpu) -+{ -+ return &per_cpu(runqueues, (cpu)); -+} -+#define cpu_curr(cpu) (cpu_rq(cpu)->curr) -+ -+/* -+ * For asym packing, by default the lower numbered cpu has higher priority. -+ */ -+int __weak arch_asym_cpu_priority(int cpu) -+{ -+ return -cpu; -+} -+ -+int __weak arch_sd_sibling_asym_packing(void) -+{ -+ return 0*SD_ASYM_PACKING; -+} -+#else -+struct rq *uprq; -+#endif /* CONFIG_SMP */ -+ -+#include "stats.h" -+ -+#ifndef prepare_arch_switch -+# define prepare_arch_switch(next) do { } while (0) -+#endif -+#ifndef finish_arch_switch -+# define finish_arch_switch(prev) do { } while (0) -+#endif -+#ifndef finish_arch_post_lock_switch -+# define finish_arch_post_lock_switch() do { } while (0) -+#endif -+ -+/* -+ * All common locking functions performed on rq->lock. rq->clock is local to -+ * the CPU accessing it so it can be modified just with interrupts disabled -+ * when we're not updating niffies. -+ * Looking up task_rq must be done under rq->lock to be safe. -+ */ -+ -+/* -+ * RQ-clock updating methods: -+ */ -+ -+static void update_rq_clock_task(struct rq *rq, s64 delta) -+{ -+/* -+ * In theory, the compile should just see 0 here, and optimize out the call -+ * to sched_rt_avg_update. But I don't trust it... -+ */ -+#ifdef CONFIG_IRQ_TIME_ACCOUNTING -+ s64 irq_delta = irq_time_read(cpu_of(rq)) - rq->prev_irq_time; -+ -+ /* -+ * Since irq_time is only updated on {soft,}irq_exit, we might run into -+ * this case when a previous update_rq_clock() happened inside a -+ * {soft,}irq region. -+ * -+ * When this happens, we stop ->clock_task and only update the -+ * prev_irq_time stamp to account for the part that fit, so that a next -+ * update will consume the rest. This ensures ->clock_task is -+ * monotonic. -+ * -+ * It does however cause some slight miss-attribution of {soft,}irq -+ * time, a more accurate solution would be to update the irq_time using -+ * the current rq->clock timestamp, except that would require using -+ * atomic ops. -+ */ -+ if (irq_delta > delta) -+ irq_delta = delta; -+ -+ rq->prev_irq_time += irq_delta; -+ delta -= irq_delta; -+#endif -+#ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING -+ if (static_key_false((¶virt_steal_rq_enabled))) { -+ s64 steal = paravirt_steal_clock(cpu_of(rq)); -+ -+ steal -= rq->prev_steal_time_rq; -+ -+ if (unlikely(steal > delta)) -+ steal = delta; -+ -+ rq->prev_steal_time_rq += steal; -+ -+ delta -= steal; -+ } -+#endif -+ rq->clock_task += delta; -+} -+ -+static inline void update_rq_clock(struct rq *rq) -+{ -+ s64 delta = sched_clock_cpu(cpu_of(rq)) - rq->clock; -+ -+ if (unlikely(delta < 0)) -+ return; -+ rq->clock += delta; -+ update_rq_clock_task(rq, delta); -+} -+ -+/* -+ * Niffies are a globally increasing nanosecond counter. They're only used by -+ * update_load_avg and time_slice_expired, however deadlines are based on them -+ * across CPUs. Update them whenever we will call one of those functions, and -+ * synchronise them across CPUs whenever we hold both runqueue locks. -+ */ -+static inline void update_clocks(struct rq *rq) -+{ -+ s64 ndiff, minndiff; -+ long jdiff; -+ -+ update_rq_clock(rq); -+ ndiff = rq->clock - rq->old_clock; -+ rq->old_clock = rq->clock; -+ jdiff = jiffies - rq->last_jiffy; -+ -+ /* Subtract any niffies added by balancing with other rqs */ -+ ndiff -= rq->niffies - rq->last_niffy; -+ minndiff = JIFFIES_TO_NS(jdiff) - rq->niffies + rq->last_jiffy_niffies; -+ if (minndiff < 0) -+ minndiff = 0; -+ ndiff = max(ndiff, minndiff); -+ rq->niffies += ndiff; -+ rq->last_niffy = rq->niffies; -+ if (jdiff) { -+ rq->last_jiffy += jdiff; -+ rq->last_jiffy_niffies = rq->niffies; -+ } -+} -+ -+static inline int task_on_rq_queued(struct task_struct *p) -+{ -+ return p->on_rq == TASK_ON_RQ_QUEUED; -+} -+ -+static inline int task_on_rq_migrating(struct task_struct *p) -+{ -+ return p->on_rq == TASK_ON_RQ_MIGRATING; -+} -+ -+static inline int rq_trylock(struct rq *rq) -+ __acquires(rq->lock) -+{ -+ return raw_spin_trylock(&rq->lock); -+} -+ -+/* -+ * Any time we have two runqueues locked we use that as an opportunity to -+ * synchronise niffies to the highest value as idle ticks may have artificially -+ * kept niffies low on one CPU and the truth can only be later. -+ */ -+static inline void synchronise_niffies(struct rq *rq1, struct rq *rq2) -+{ -+ if (rq1->niffies > rq2->niffies) -+ rq2->niffies = rq1->niffies; -+ else -+ rq1->niffies = rq2->niffies; -+} -+ -+/* -+ * double_rq_lock - safely lock two runqueues -+ * -+ * Note this does not disable interrupts like task_rq_lock, -+ * you need to do so manually before calling. -+ */ -+ -+/* For when we know rq1 != rq2 */ -+static inline void __double_rq_lock(struct rq *rq1, struct rq *rq2) -+ __acquires(rq1->lock) -+ __acquires(rq2->lock) -+{ -+ if (rq1 < rq2) { -+ raw_spin_lock(&rq1->lock); -+ raw_spin_lock_nested(&rq2->lock, SINGLE_DEPTH_NESTING); -+ } else { -+ raw_spin_lock(&rq2->lock); -+ raw_spin_lock_nested(&rq1->lock, SINGLE_DEPTH_NESTING); -+ } -+} -+ -+static inline void double_rq_lock(struct rq *rq1, struct rq *rq2) -+ __acquires(rq1->lock) -+ __acquires(rq2->lock) -+{ -+ BUG_ON(!irqs_disabled()); -+ if (rq1 == rq2) { -+ raw_spin_lock(&rq1->lock); -+ __acquire(rq2->lock); /* Fake it out ;) */ -+ } else -+ __double_rq_lock(rq1, rq2); -+ synchronise_niffies(rq1, rq2); -+} -+ -+/* -+ * double_rq_unlock - safely unlock two runqueues -+ * -+ * Note this does not restore interrupts like task_rq_unlock, -+ * you need to do so manually after calling. -+ */ -+static inline void double_rq_unlock(struct rq *rq1, struct rq *rq2) -+ __releases(rq1->lock) -+ __releases(rq2->lock) -+{ -+ raw_spin_unlock(&rq1->lock); -+ if (rq1 != rq2) -+ raw_spin_unlock(&rq2->lock); -+ else -+ __release(rq2->lock); -+} -+ -+static inline void lock_all_rqs(void) -+{ -+ int cpu; -+ -+ preempt_disable(); -+ for_each_possible_cpu(cpu) { -+ struct rq *rq = cpu_rq(cpu); -+ -+ do_raw_spin_lock(&rq->lock); -+ } -+} -+ -+static inline void unlock_all_rqs(void) -+{ -+ int cpu; -+ -+ for_each_possible_cpu(cpu) { -+ struct rq *rq = cpu_rq(cpu); -+ -+ do_raw_spin_unlock(&rq->lock); -+ } -+ preempt_enable(); -+} -+ -+/* Specially nest trylock an rq */ -+static inline bool trylock_rq(struct rq *this_rq, struct rq *rq) -+{ -+ if (unlikely(!do_raw_spin_trylock(&rq->lock))) -+ return false; -+ spin_acquire(&rq->lock.dep_map, SINGLE_DEPTH_NESTING, 1, _RET_IP_); -+ synchronise_niffies(this_rq, rq); -+ return true; -+} -+ -+/* Unlock a specially nested trylocked rq */ -+static inline void unlock_rq(struct rq *rq) -+{ -+ spin_release(&rq->lock.dep_map, 1, _RET_IP_); -+ do_raw_spin_unlock(&rq->lock); -+} -+ -+/* -+ * cmpxchg based fetch_or, macro so it works for different integer types -+ */ -+#define fetch_or(ptr, mask) \ -+ ({ \ -+ typeof(ptr) _ptr = (ptr); \ -+ typeof(mask) _mask = (mask); \ -+ typeof(*_ptr) _old, _val = *_ptr; \ -+ \ -+ for (;;) { \ -+ _old = cmpxchg(_ptr, _val, _val | _mask); \ -+ if (_old == _val) \ -+ break; \ -+ _val = _old; \ -+ } \ -+ _old; \ -+}) -+ -+#if defined(CONFIG_SMP) && defined(TIF_POLLING_NRFLAG) -+/* -+ * Atomically set TIF_NEED_RESCHED and test for TIF_POLLING_NRFLAG, -+ * this avoids any races wrt polling state changes and thereby avoids -+ * spurious IPIs. -+ */ -+static bool set_nr_and_not_polling(struct task_struct *p) -+{ -+ struct thread_info *ti = task_thread_info(p); -+ return !(fetch_or(&ti->flags, _TIF_NEED_RESCHED) & _TIF_POLLING_NRFLAG); -+} -+ -+/* -+ * Atomically set TIF_NEED_RESCHED if TIF_POLLING_NRFLAG is set. -+ * -+ * If this returns true, then the idle task promises to call -+ * sched_ttwu_pending() and reschedule soon. -+ */ -+static bool set_nr_if_polling(struct task_struct *p) -+{ -+ struct thread_info *ti = task_thread_info(p); -+ typeof(ti->flags) old, val = READ_ONCE(ti->flags); -+ -+ for (;;) { -+ if (!(val & _TIF_POLLING_NRFLAG)) -+ return false; -+ if (val & _TIF_NEED_RESCHED) -+ return true; -+ old = cmpxchg(&ti->flags, val, val | _TIF_NEED_RESCHED); -+ if (old == val) -+ break; -+ val = old; -+ } -+ return true; -+} -+ -+#else -+static bool set_nr_and_not_polling(struct task_struct *p) -+{ -+ set_tsk_need_resched(p); -+ return true; -+} -+ -+#ifdef CONFIG_SMP -+static bool set_nr_if_polling(struct task_struct *p) -+{ -+ return false; -+} -+#endif -+#endif -+ -+void wake_q_add(struct wake_q_head *head, struct task_struct *task) -+{ -+ struct wake_q_node *node = &task->wake_q; -+ -+ /* -+ * Atomically grab the task, if ->wake_q is !nil already it means -+ * its already queued (either by us or someone else) and will get the -+ * wakeup due to that. -+ * -+ * This cmpxchg() implies a full barrier, which pairs with the write -+ * barrier implied by the wakeup in wake_up_q(). -+ */ -+ if (cmpxchg(&node->next, NULL, WAKE_Q_TAIL)) -+ return; -+ -+ get_task_struct(task); -+ -+ /* -+ * The head is context local, there can be no concurrency. -+ */ -+ *head->lastp = node; -+ head->lastp = &node->next; -+} -+ -+void wake_up_q(struct wake_q_head *head) -+{ -+ struct wake_q_node *node = head->first; -+ -+ while (node != WAKE_Q_TAIL) { -+ struct task_struct *task; -+ -+ task = container_of(node, struct task_struct, wake_q); -+ BUG_ON(!task); -+ /* Task can safely be re-inserted now */ -+ node = node->next; -+ task->wake_q.next = NULL; -+ -+ /* -+ * wake_up_process() implies a wmb() to pair with the queueing -+ * in wake_q_add() so as not to miss wakeups. -+ */ -+ wake_up_process(task); -+ put_task_struct(task); -+ } -+} -+ -+static inline void prepare_lock_switch(struct rq *rq, struct task_struct *next) -+{ -+ next->on_cpu = 1; -+} -+ -+static inline void smp_sched_reschedule(int cpu) -+{ -+ if (likely(cpu_online(cpu))) -+ smp_send_reschedule(cpu); -+} -+ -+/* -+ * resched_task - mark a task 'to be rescheduled now'. -+ * -+ * On UP this means the setting of the need_resched flag, on SMP it -+ * might also involve a cross-CPU call to trigger the scheduler on -+ * the target CPU. -+ */ -+void resched_task(struct task_struct *p) -+{ -+ int cpu; -+#ifdef CONFIG_LOCKDEP -+ /* Kernel threads call this when creating workqueues while still -+ * inactive from __kthread_bind_mask, holding only the pi_lock */ -+ if (!(p->flags & PF_KTHREAD)) { -+ struct rq *rq = task_rq(p); -+ -+ lockdep_assert_held(&rq->lock); -+ } -+#endif -+ if (test_tsk_need_resched(p)) -+ return; -+ -+ cpu = task_cpu(p); -+ if (cpu == smp_processor_id()) { -+ set_tsk_need_resched(p); -+ set_preempt_need_resched(); -+ return; -+ } -+ -+ if (set_nr_and_not_polling(p)) -+ smp_sched_reschedule(cpu); -+ else -+ trace_sched_wake_idle_without_ipi(cpu); -+} -+ -+/* -+ * A task that is not running or queued will not have a node set. -+ * A task that is queued but not running will have a node set. -+ * A task that is currently running will have ->on_cpu set but no node set. -+ */ -+static inline bool task_queued(struct task_struct *p) -+{ -+ return !skiplist_node_empty(&p->node); -+} -+ -+static void enqueue_task(struct rq *rq, struct task_struct *p, int flags); -+static inline void resched_if_idle(struct rq *rq); -+ -+/* Dodgy workaround till we figure out where the softirqs are going */ -+static inline void do_pending_softirq(struct rq *rq, struct task_struct *next) -+{ -+ if (unlikely(next == rq->idle && local_softirq_pending() && !in_interrupt())) -+ do_softirq_own_stack(); -+} -+ -+static inline void finish_lock_switch(struct rq *rq, struct task_struct *prev) -+{ -+#ifdef CONFIG_SMP -+ /* -+ * After ->on_cpu is cleared, the task can be moved to a different CPU. -+ * We must ensure this doesn't happen until the switch is completely -+ * finished. -+ * -+ * In particular, the load of prev->state in finish_task_switch() must -+ * happen before this. -+ * -+ * Pairs with the smp_cond_load_acquire() in try_to_wake_up(). -+ */ -+ smp_store_release(&prev->on_cpu, 0); -+#endif -+#ifdef CONFIG_DEBUG_SPINLOCK -+ /* this is a valid case when another task releases the spinlock */ -+ rq->lock.owner = current; -+#endif -+ /* -+ * If we are tracking spinlock dependencies then we have to -+ * fix up the runqueue lock - which gets 'carried over' from -+ * prev into current: -+ */ -+ spin_acquire(&rq->lock.dep_map, 0, 0, _THIS_IP_); -+ -+#ifdef CONFIG_SMP -+ /* -+ * If prev was marked as migrating to another CPU in return_task, drop -+ * the local runqueue lock but leave interrupts disabled and grab the -+ * remote lock we're migrating it to before enabling them. -+ */ -+ if (unlikely(task_on_rq_migrating(prev))) { -+ sched_info_dequeued(rq, prev); -+ /* -+ * We move the ownership of prev to the new cpu now. ttwu can't -+ * activate prev to the wrong cpu since it has to grab this -+ * runqueue in ttwu_remote. -+ */ -+#ifdef CONFIG_THREAD_INFO_IN_TASK -+ prev->cpu = prev->wake_cpu; -+#else -+ task_thread_info(prev)->cpu = prev->wake_cpu; -+#endif -+ raw_spin_unlock(&rq->lock); -+ -+ raw_spin_lock(&prev->pi_lock); -+ rq = __task_rq_lock(prev); -+ /* Check that someone else hasn't already queued prev */ -+ if (likely(!task_queued(prev))) { -+ enqueue_task(rq, prev, 0); -+ prev->on_rq = TASK_ON_RQ_QUEUED; -+ /* Wake up the CPU if it's not already running */ -+ resched_if_idle(rq); -+ } -+ raw_spin_unlock(&prev->pi_lock); -+ } -+#endif -+ /* Accurately set nr_running here for load average calculations */ -+ rq->nr_running = rq->sl->entries + !rq_idle(rq); -+ rq_unlock(rq); -+ -+ do_pending_softirq(rq, current); -+ -+ local_irq_enable(); -+} -+ -+static inline bool deadline_before(u64 deadline, u64 time) -+{ -+ return (deadline < time); -+} -+ -+/* -+ * Deadline is "now" in niffies + (offset by priority). Setting the deadline -+ * is the key to everything. It distributes cpu fairly amongst tasks of the -+ * same nice value, it proportions cpu according to nice level, it means the -+ * task that last woke up the longest ago has the earliest deadline, thus -+ * ensuring that interactive tasks get low latency on wake up. The CPU -+ * proportion works out to the square of the virtual deadline difference, so -+ * this equation will give nice 19 3% CPU compared to nice 0. -+ */ -+static inline u64 prio_deadline_diff(int user_prio) -+{ -+ return (prio_ratios[user_prio] * rr_interval * (MS_TO_NS(1) / 128)); -+} -+ -+static inline u64 task_deadline_diff(struct task_struct *p) -+{ -+ return prio_deadline_diff(TASK_USER_PRIO(p)); -+} -+ -+static inline u64 static_deadline_diff(int static_prio) -+{ -+ return prio_deadline_diff(USER_PRIO(static_prio)); -+} -+ -+static inline int longest_deadline_diff(void) -+{ -+ return prio_deadline_diff(39); -+} -+ -+static inline int ms_longest_deadline_diff(void) -+{ -+ return NS_TO_MS(longest_deadline_diff()); -+} -+ -+static inline bool rq_local(struct rq *rq); -+ -+#ifndef SCHED_CAPACITY_SCALE -+#define SCHED_CAPACITY_SCALE 1024 -+#endif -+ -+static inline int rq_load(struct rq *rq) -+{ -+ return rq->nr_running; -+} -+ -+/* -+ * Update the load average for feeding into cpu frequency governors. Use a -+ * rough estimate of a rolling average with ~ time constant of 32ms. -+ * 80/128 ~ 0.63. * 80 / 32768 / 128 == * 5 / 262144 -+ * Make sure a call to update_clocks has been made before calling this to get -+ * an updated rq->niffies. -+ */ -+static void update_load_avg(struct rq *rq, unsigned int flags) -+{ -+ unsigned long us_interval, curload; -+ long load; -+ -+ if (unlikely(rq->niffies <= rq->load_update)) -+ return; -+ -+ us_interval = NS_TO_US(rq->niffies - rq->load_update); -+ curload = rq_load(rq); -+ load = rq->load_avg - (rq->load_avg * us_interval * 5 / 262144); -+ if (unlikely(load < 0)) -+ load = 0; -+ load += curload * curload * SCHED_CAPACITY_SCALE * us_interval * 5 / 262144; -+ rq->load_avg = load; -+ -+ rq->load_update = rq->niffies; -+ if (likely(rq_local(rq))) -+ cpufreq_trigger(rq, flags); -+} -+ -+/* -+ * Removing from the runqueue. Enter with rq locked. Deleting a task -+ * from the skip list is done via the stored node reference in the task struct -+ * and does not require a full look up. Thus it occurs in O(k) time where k -+ * is the "level" of the list the task was stored at - usually < 4, max 8. -+ */ -+static void dequeue_task(struct rq *rq, struct task_struct *p, int flags) -+{ -+ skiplist_delete(rq->sl, &p->node); -+ rq->best_key = rq->node.next[0]->key; -+ update_clocks(rq); -+ -+ if (!(flags & DEQUEUE_SAVE)) -+ sched_info_dequeued(task_rq(p), p); -+ update_load_avg(rq, flags); -+} -+ -+#ifdef CONFIG_PREEMPT_RCU -+static bool rcu_read_critical(struct task_struct *p) -+{ -+ return p->rcu_read_unlock_special.b.blocked; -+} -+#else /* CONFIG_PREEMPT_RCU */ -+#define rcu_read_critical(p) (false) -+#endif /* CONFIG_PREEMPT_RCU */ -+ -+/* -+ * To determine if it's safe for a task of SCHED_IDLEPRIO to actually run as -+ * an idle task, we ensure none of the following conditions are met. -+ */ -+static bool idleprio_suitable(struct task_struct *p) -+{ -+ return (!(task_contributes_to_load(p)) && !(p->flags & (PF_EXITING)) && -+ !signal_pending(p) && !rcu_read_critical(p) && !freezing(p)); -+} -+ -+/* -+ * To determine if a task of SCHED_ISO can run in pseudo-realtime, we check -+ * that the iso_refractory flag is not set. -+ */ -+static inline bool isoprio_suitable(struct rq *rq) -+{ -+ return !rq->iso_refractory; -+} -+ -+/* -+ * Adding to the runqueue. Enter with rq locked. -+ */ -+static void enqueue_task(struct rq *rq, struct task_struct *p, int flags) -+{ -+ unsigned int randseed, cflags = 0; -+ u64 sl_id; -+ -+ if (!rt_task(p)) { -+ /* Check it hasn't gotten rt from PI */ -+ if ((idleprio_task(p) && idleprio_suitable(p)) || -+ (iso_task(p) && isoprio_suitable(rq))) -+ p->prio = p->normal_prio; -+ else -+ p->prio = NORMAL_PRIO; -+ } -+ /* -+ * The sl_id key passed to the skiplist generates a sorted list. -+ * Realtime and sched iso tasks run FIFO so they only need be sorted -+ * according to priority. The skiplist will put tasks of the same -+ * key inserted later in FIFO order. Tasks of sched normal, batch -+ * and idleprio are sorted according to their deadlines. Idleprio -+ * tasks are offset by an impossibly large deadline value ensuring -+ * they get sorted into last positions, but still according to their -+ * own deadlines. This creates a "landscape" of skiplists running -+ * from priority 0 realtime in first place to the lowest priority -+ * idleprio tasks last. Skiplist insertion is an O(log n) process. -+ */ -+ if (p->prio <= ISO_PRIO) { -+ sl_id = p->prio; -+ cflags = SCHED_CPUFREQ_RT; -+ } else { -+ sl_id = p->deadline; -+ if (idleprio_task(p)) { -+ if (p->prio == IDLE_PRIO) -+ sl_id |= 0xF000000000000000; -+ else -+ sl_id += longest_deadline_diff(); -+ } -+ } -+ /* -+ * Some architectures don't have better than microsecond resolution -+ * so mask out ~microseconds as the random seed for skiplist insertion. -+ */ -+ update_clocks(rq); -+ if (!(flags & ENQUEUE_RESTORE)) -+ sched_info_queued(rq, p); -+ randseed = (rq->niffies >> 10) & 0xFFFFFFFF; -+ skiplist_insert(rq->sl, &p->node, sl_id, p, randseed); -+ rq->best_key = rq->node.next[0]->key; -+ if (p->in_iowait) -+ cflags |= SCHED_CPUFREQ_IOWAIT; -+ update_load_avg(rq, cflags); -+} -+ -+/* -+ * Returns the relative length of deadline all compared to the shortest -+ * deadline which is that of nice -20. -+ */ -+static inline int task_prio_ratio(struct task_struct *p) -+{ -+ return prio_ratios[TASK_USER_PRIO(p)]; -+} -+ -+/* -+ * task_timeslice - all tasks of all priorities get the exact same timeslice -+ * length. CPU distribution is handled by giving different deadlines to -+ * tasks of different priorities. Use 128 as the base value for fast shifts. -+ */ -+static inline int task_timeslice(struct task_struct *p) -+{ -+ return (rr_interval * task_prio_ratio(p) / 128); -+} -+ -+#ifdef CONFIG_SMP -+/* Entered with rq locked */ -+static inline void resched_if_idle(struct rq *rq) -+{ -+ if (rq_idle(rq)) -+ resched_task(rq->curr); -+} -+ -+static inline bool rq_local(struct rq *rq) -+{ -+ return (rq->cpu == smp_processor_id()); -+} -+#ifdef CONFIG_SMT_NICE -+static const cpumask_t *thread_cpumask(int cpu); -+ -+/* Find the best real time priority running on any SMT siblings of cpu and if -+ * none are running, the static priority of the best deadline task running. -+ * The lookups to the other runqueues is done lockless as the occasional wrong -+ * value would be harmless. */ -+static int best_smt_bias(struct rq *this_rq) -+{ -+ int other_cpu, best_bias = 0; -+ -+ for_each_cpu(other_cpu, &this_rq->thread_mask) { -+ struct rq *rq = cpu_rq(other_cpu); -+ -+ if (rq_idle(rq)) -+ continue; -+ if (unlikely(!rq->online)) -+ continue; -+ if (!rq->rq_mm) -+ continue; -+ if (likely(rq->rq_smt_bias > best_bias)) -+ best_bias = rq->rq_smt_bias; -+ } -+ return best_bias; -+} -+ -+static int task_prio_bias(struct task_struct *p) -+{ -+ if (rt_task(p)) -+ return 1 << 30; -+ else if (task_running_iso(p)) -+ return 1 << 29; -+ else if (task_running_idle(p)) -+ return 0; -+ return MAX_PRIO - p->static_prio; -+} -+ -+static bool smt_always_schedule(struct task_struct __maybe_unused *p, struct rq __maybe_unused *this_rq) -+{ -+ return true; -+} -+ -+static bool (*smt_schedule)(struct task_struct *p, struct rq *this_rq) = &smt_always_schedule; -+ -+/* We've already decided p can run on CPU, now test if it shouldn't for SMT -+ * nice reasons. */ -+static bool smt_should_schedule(struct task_struct *p, struct rq *this_rq) -+{ -+ int best_bias, task_bias; -+ -+ /* Kernel threads always run */ -+ if (unlikely(!p->mm)) -+ return true; -+ if (rt_task(p)) -+ return true; -+ if (!idleprio_suitable(p)) -+ return true; -+ best_bias = best_smt_bias(this_rq); -+ /* The smt siblings are all idle or running IDLEPRIO */ -+ if (best_bias < 1) -+ return true; -+ task_bias = task_prio_bias(p); -+ if (task_bias < 1) -+ return false; -+ if (task_bias >= best_bias) -+ return true; -+ /* Dither 25% cpu of normal tasks regardless of nice difference */ -+ if (best_bias % 4 == 1) -+ return true; -+ /* Sorry, you lose */ -+ return false; -+} -+#else /* CONFIG_SMT_NICE */ -+#define smt_schedule(p, this_rq) (true) -+#endif /* CONFIG_SMT_NICE */ -+ -+static inline void atomic_set_cpu(int cpu, cpumask_t *cpumask) -+{ -+ set_bit(cpu, (volatile unsigned long *)cpumask); -+} -+ -+/* -+ * The cpu_idle_map stores a bitmap of all the CPUs currently idle to -+ * allow easy lookup of whether any suitable idle CPUs are available. -+ * It's cheaper to maintain a binary yes/no if there are any idle CPUs on the -+ * idle_cpus variable than to do a full bitmask check when we are busy. The -+ * bits are set atomically but read locklessly as occasional false positive / -+ * negative is harmless. -+ */ -+static inline void set_cpuidle_map(int cpu) -+{ -+ if (likely(cpu_online(cpu))) -+ atomic_set_cpu(cpu, &cpu_idle_map); -+} -+ -+static inline void atomic_clear_cpu(int cpu, cpumask_t *cpumask) -+{ -+ clear_bit(cpu, (volatile unsigned long *)cpumask); -+} -+ -+static inline void clear_cpuidle_map(int cpu) -+{ -+ atomic_clear_cpu(cpu, &cpu_idle_map); -+} -+ -+static bool suitable_idle_cpus(struct task_struct *p) -+{ -+ return (cpumask_intersects(&p->cpus_allowed, &cpu_idle_map)); -+} -+ -+/* -+ * Resched current on rq. We don't know if rq is local to this CPU nor if it -+ * is locked so we do not use an intermediate variable for the task to avoid -+ * having it dereferenced. -+ */ -+static void resched_curr(struct rq *rq) -+{ -+ int cpu; -+ -+ if (test_tsk_need_resched(rq->curr)) -+ return; -+ -+ rq->preempt = rq->curr; -+ cpu = rq->cpu; -+ -+ /* We're doing this without holding the rq lock if it's not task_rq */ -+ -+ if (cpu == smp_processor_id()) { -+ set_tsk_need_resched(rq->curr); -+ set_preempt_need_resched(); -+ return; -+ } -+ -+ if (set_nr_and_not_polling(rq->curr)) -+ smp_sched_reschedule(cpu); -+ else -+ trace_sched_wake_idle_without_ipi(cpu); -+} -+ -+#define CPUIDLE_DIFF_THREAD (1) -+#define CPUIDLE_DIFF_CORE (2) -+#define CPUIDLE_CACHE_BUSY (4) -+#define CPUIDLE_DIFF_CPU (8) -+#define CPUIDLE_THREAD_BUSY (16) -+#define CPUIDLE_DIFF_NODE (32) -+ -+/* -+ * The best idle CPU is chosen according to the CPUIDLE ranking above where the -+ * lowest value would give the most suitable CPU to schedule p onto next. The -+ * order works out to be the following: -+ * -+ * Same thread, idle or busy cache, idle or busy threads -+ * Other core, same cache, idle or busy cache, idle threads. -+ * Same node, other CPU, idle cache, idle threads. -+ * Same node, other CPU, busy cache, idle threads. -+ * Other core, same cache, busy threads. -+ * Same node, other CPU, busy threads. -+ * Other node, other CPU, idle cache, idle threads. -+ * Other node, other CPU, busy cache, idle threads. -+ * Other node, other CPU, busy threads. -+ */ -+static int best_mask_cpu(int best_cpu, struct rq *rq, cpumask_t *tmpmask) -+{ -+ int best_ranking = CPUIDLE_DIFF_NODE | CPUIDLE_THREAD_BUSY | -+ CPUIDLE_DIFF_CPU | CPUIDLE_CACHE_BUSY | CPUIDLE_DIFF_CORE | -+ CPUIDLE_DIFF_THREAD; -+ int cpu_tmp; -+ -+ if (cpumask_test_cpu(best_cpu, tmpmask)) -+ goto out; -+ -+ for_each_cpu(cpu_tmp, tmpmask) { -+ int ranking, locality; -+ struct rq *tmp_rq; -+ -+ ranking = 0; -+ tmp_rq = cpu_rq(cpu_tmp); -+ -+ locality = rq->cpu_locality[cpu_tmp]; -+#ifdef CONFIG_NUMA -+ if (locality > 3) -+ ranking |= CPUIDLE_DIFF_NODE; -+ else -+#endif -+ if (locality > 2) -+ ranking |= CPUIDLE_DIFF_CPU; -+#ifdef CONFIG_SCHED_MC -+ else if (locality == 2) -+ ranking |= CPUIDLE_DIFF_CORE; -+ else if (!(tmp_rq->cache_idle(tmp_rq))) -+ ranking |= CPUIDLE_CACHE_BUSY; -+#endif -+#ifdef CONFIG_SCHED_SMT -+ if (locality == 1) -+ ranking |= CPUIDLE_DIFF_THREAD; -+ if (!(tmp_rq->siblings_idle(tmp_rq))) -+ ranking |= CPUIDLE_THREAD_BUSY; -+#endif -+ if (ranking < best_ranking) { -+ best_cpu = cpu_tmp; -+ best_ranking = ranking; -+ } -+ } -+out: -+ return best_cpu; -+} -+ -+bool cpus_share_cache(int this_cpu, int that_cpu) -+{ -+ struct rq *this_rq = cpu_rq(this_cpu); -+ -+ return (this_rq->cpu_locality[that_cpu] < 3); -+} -+ -+/* As per resched_curr but only will resched idle task */ -+static inline void resched_idle(struct rq *rq) -+{ -+ if (test_tsk_need_resched(rq->idle)) -+ return; -+ -+ rq->preempt = rq->idle; -+ -+ set_tsk_need_resched(rq->idle); -+ -+ if (rq_local(rq)) { -+ set_preempt_need_resched(); -+ return; -+ } -+ -+ smp_sched_reschedule(rq->cpu); -+} -+ -+static struct rq *resched_best_idle(struct task_struct *p, int cpu) -+{ -+ cpumask_t tmpmask; -+ struct rq *rq; -+ int best_cpu; -+ -+ cpumask_and(&tmpmask, &p->cpus_allowed, &cpu_idle_map); -+ best_cpu = best_mask_cpu(cpu, task_rq(p), &tmpmask); -+ rq = cpu_rq(best_cpu); -+ if (!smt_schedule(p, rq)) -+ return NULL; -+ rq->preempt = p; -+ resched_idle(rq); -+ return rq; -+} -+ -+static inline void resched_suitable_idle(struct task_struct *p) -+{ -+ if (suitable_idle_cpus(p)) -+ resched_best_idle(p, task_cpu(p)); -+} -+ -+static inline struct rq *rq_order(struct rq *rq, int cpu) -+{ -+ return rq->rq_order[cpu]; -+} -+#else /* CONFIG_SMP */ -+static inline void set_cpuidle_map(int cpu) -+{ -+} -+ -+static inline void clear_cpuidle_map(int cpu) -+{ -+} -+ -+static inline bool suitable_idle_cpus(struct task_struct *p) -+{ -+ return uprq->curr == uprq->idle; -+} -+ -+static inline void resched_suitable_idle(struct task_struct *p) -+{ -+} -+ -+static inline void resched_curr(struct rq *rq) -+{ -+ resched_task(rq->curr); -+} -+ -+static inline void resched_if_idle(struct rq *rq) -+{ -+} -+ -+static inline bool rq_local(struct rq *rq) -+{ -+ return true; -+} -+ -+static inline struct rq *rq_order(struct rq *rq, int cpu) -+{ -+ return rq; -+} -+ -+static inline bool smt_schedule(struct task_struct *p, struct rq *rq) -+{ -+ return true; -+} -+#endif /* CONFIG_SMP */ -+ -+static inline int normal_prio(struct task_struct *p) -+{ -+ if (has_rt_policy(p)) -+ return MAX_RT_PRIO - 1 - p->rt_priority; -+ if (idleprio_task(p)) -+ return IDLE_PRIO; -+ if (iso_task(p)) -+ return ISO_PRIO; -+ return NORMAL_PRIO; -+} -+ -+/* -+ * Calculate the current priority, i.e. the priority -+ * taken into account by the scheduler. This value might -+ * be boosted by RT tasks as it will be RT if the task got -+ * RT-boosted. If not then it returns p->normal_prio. -+ */ -+static int effective_prio(struct task_struct *p) -+{ -+ p->normal_prio = normal_prio(p); -+ /* -+ * If we are RT tasks or we were boosted to RT priority, -+ * keep the priority unchanged. Otherwise, update priority -+ * to the normal priority: -+ */ -+ if (!rt_prio(p->prio)) -+ return p->normal_prio; -+ return p->prio; -+} -+ -+/* -+ * activate_task - move a task to the runqueue. Enter with rq locked. -+ */ -+static void activate_task(struct task_struct *p, struct rq *rq) -+{ -+ resched_if_idle(rq); -+ -+ /* -+ * Sleep time is in units of nanosecs, so shift by 20 to get a -+ * milliseconds-range estimation of the amount of time that the task -+ * spent sleeping: -+ */ -+ if (unlikely(prof_on == SLEEP_PROFILING)) { -+ if (p->state == TASK_UNINTERRUPTIBLE) -+ profile_hits(SLEEP_PROFILING, (void *)get_wchan(p), -+ (rq->niffies - p->last_ran) >> 20); -+ } -+ -+ p->prio = effective_prio(p); -+ if (task_contributes_to_load(p)) -+ rq->nr_uninterruptible--; -+ -+ enqueue_task(rq, p, 0); -+ p->on_rq = TASK_ON_RQ_QUEUED; -+} -+ -+/* -+ * deactivate_task - If it's running, it's not on the runqueue and we can just -+ * decrement the nr_running. Enter with rq locked. -+ */ -+static inline void deactivate_task(struct task_struct *p, struct rq *rq) -+{ -+ if (task_contributes_to_load(p)) -+ rq->nr_uninterruptible++; -+ -+ p->on_rq = 0; -+ sched_info_dequeued(rq, p); -+} -+ -+#ifdef CONFIG_SMP -+void set_task_cpu(struct task_struct *p, unsigned int new_cpu) -+{ -+ struct rq *rq; -+ -+ if (task_cpu(p) == new_cpu) -+ return; -+ -+ /* Do NOT call set_task_cpu on a currently queued task as we will not -+ * be reliably holding the rq lock after changing CPU. */ -+ BUG_ON(task_queued(p)); -+ rq = task_rq(p); -+ -+#ifdef CONFIG_LOCKDEP -+ /* -+ * The caller should hold either p->pi_lock or rq->lock, when changing -+ * a task's CPU. ->pi_lock for waking tasks, rq->lock for runnable tasks. -+ * -+ * Furthermore, all task_rq users should acquire both locks, see -+ * task_rq_lock(). -+ */ -+ WARN_ON_ONCE(debug_locks && !(lockdep_is_held(&p->pi_lock) || -+ lockdep_is_held(&rq->lock))); -+#endif -+ -+ trace_sched_migrate_task(p, new_cpu); -+ perf_event_task_migrate(p); -+ -+ /* -+ * After ->cpu is set up to a new value, task_rq_lock(p, ...) can be -+ * successfully executed on another CPU. We must ensure that updates of -+ * per-task data have been completed by this moment. -+ */ -+ smp_wmb(); -+ -+ p->wake_cpu = new_cpu; -+ -+ if (task_running(rq, p)) { -+ /* -+ * We should only be calling this on a running task if we're -+ * holding rq lock. -+ */ -+ lockdep_assert_held(&rq->lock); -+ -+ /* -+ * We can't change the task_thread_info CPU on a running task -+ * as p will still be protected by the rq lock of the CPU it -+ * is still running on so we only set the wake_cpu for it to be -+ * lazily updated once off the CPU. -+ */ -+ return; -+ } -+ -+#ifdef CONFIG_THREAD_INFO_IN_TASK -+ p->cpu = new_cpu; -+#else -+ task_thread_info(p)->cpu = new_cpu; -+#endif -+ /* We're no longer protecting p after this point since we're holding -+ * the wrong runqueue lock. */ -+} -+#endif /* CONFIG_SMP */ -+ -+/* -+ * Move a task off the runqueue and take it to a cpu for it will -+ * become the running task. -+ */ -+static inline void take_task(struct rq *rq, int cpu, struct task_struct *p) -+{ -+ struct rq *p_rq = task_rq(p); -+ -+ dequeue_task(p_rq, p, DEQUEUE_SAVE); -+ if (p_rq != rq) { -+ sched_info_dequeued(p_rq, p); -+ sched_info_queued(rq, p); -+ } -+ set_task_cpu(p, cpu); -+} -+ -+/* -+ * Returns a descheduling task to the runqueue unless it is being -+ * deactivated. -+ */ -+static inline void return_task(struct task_struct *p, struct rq *rq, -+ int cpu, bool deactivate) -+{ -+ if (deactivate) -+ deactivate_task(p, rq); -+ else { -+#ifdef CONFIG_SMP -+ /* -+ * set_task_cpu was called on the running task that doesn't -+ * want to deactivate so it has to be enqueued to a different -+ * CPU and we need its lock. Tag it to be moved with as the -+ * lock is dropped in finish_lock_switch. -+ */ -+ if (unlikely(p->wake_cpu != cpu)) -+ p->on_rq = TASK_ON_RQ_MIGRATING; -+ else -+#endif -+ enqueue_task(rq, p, ENQUEUE_RESTORE); -+ } -+} -+ -+/* Enter with rq lock held. We know p is on the local cpu */ -+static inline void __set_tsk_resched(struct task_struct *p) -+{ -+ set_tsk_need_resched(p); -+ set_preempt_need_resched(); -+} -+ -+/** -+ * task_curr - is this task currently executing on a CPU? -+ * @p: the task in question. -+ * -+ * Return: 1 if the task is currently executing. 0 otherwise. -+ */ -+inline int task_curr(const struct task_struct *p) -+{ -+ return cpu_curr(task_cpu(p)) == p; -+} -+ -+#ifdef CONFIG_SMP -+/* -+ * wait_task_inactive - wait for a thread to unschedule. -+ * -+ * If @match_state is nonzero, it's the @p->state value just checked and -+ * not expected to change. If it changes, i.e. @p might have woken up, -+ * then return zero. When we succeed in waiting for @p to be off its CPU, -+ * we return a positive number (its total switch count). If a second call -+ * a short while later returns the same number, the caller can be sure that -+ * @p has remained unscheduled the whole time. -+ * -+ * The caller must ensure that the task *will* unschedule sometime soon, -+ * else this function might spin for a *long* time. This function can't -+ * be called with interrupts off, or it may introduce deadlock with -+ * smp_call_function() if an IPI is sent by the same process we are -+ * waiting to become inactive. -+ */ -+unsigned long wait_task_inactive(struct task_struct *p, long match_state) -+{ -+ int running, queued; -+ unsigned long flags; -+ unsigned long ncsw; -+ struct rq *rq; -+ -+ for (;;) { -+ rq = task_rq(p); -+ -+ /* -+ * If the task is actively running on another CPU -+ * still, just relax and busy-wait without holding -+ * any locks. -+ * -+ * NOTE! Since we don't hold any locks, it's not -+ * even sure that "rq" stays as the right runqueue! -+ * But we don't care, since this will return false -+ * if the runqueue has changed and p is actually now -+ * running somewhere else! -+ */ -+ while (task_running(rq, p)) { -+ if (match_state && unlikely(p->state != match_state)) -+ return 0; -+ cpu_relax(); -+ } -+ -+ /* -+ * Ok, time to look more closely! We need the rq -+ * lock now, to be *sure*. If we're wrong, we'll -+ * just go back and repeat. -+ */ -+ rq = task_rq_lock(p, &flags); -+ trace_sched_wait_task(p); -+ running = task_running(rq, p); -+ queued = task_on_rq_queued(p); -+ ncsw = 0; -+ if (!match_state || p->state == match_state) -+ ncsw = p->nvcsw | LONG_MIN; /* sets MSB */ -+ task_rq_unlock(rq, p, &flags); -+ -+ /* -+ * If it changed from the expected state, bail out now. -+ */ -+ if (unlikely(!ncsw)) -+ break; -+ -+ /* -+ * Was it really running after all now that we -+ * checked with the proper locks actually held? -+ * -+ * Oops. Go back and try again.. -+ */ -+ if (unlikely(running)) { -+ cpu_relax(); -+ continue; -+ } -+ -+ /* -+ * It's not enough that it's not actively running, -+ * it must be off the runqueue _entirely_, and not -+ * preempted! -+ * -+ * So if it was still runnable (but just not actively -+ * running right now), it's preempted, and we should -+ * yield - it could be a while. -+ */ -+ if (unlikely(queued)) { -+ ktime_t to = NSEC_PER_SEC / HZ; -+ -+ set_current_state(TASK_UNINTERRUPTIBLE); -+ schedule_hrtimeout(&to, HRTIMER_MODE_REL); -+ continue; -+ } -+ -+ /* -+ * Ahh, all good. It wasn't running, and it wasn't -+ * runnable, which means that it will never become -+ * running in the future either. We're all done! -+ */ -+ break; -+ } -+ -+ return ncsw; -+} -+ -+/*** -+ * kick_process - kick a running thread to enter/exit the kernel -+ * @p: the to-be-kicked thread -+ * -+ * Cause a process which is running on another CPU to enter -+ * kernel-mode, without any delay. (to get signals handled.) -+ * -+ * NOTE: this function doesn't have to take the runqueue lock, -+ * because all it wants to ensure is that the remote task enters -+ * the kernel. If the IPI races and the task has been migrated -+ * to another CPU then no harm is done and the purpose has been -+ * achieved as well. -+ */ -+void kick_process(struct task_struct *p) -+{ -+ int cpu; -+ -+ preempt_disable(); -+ cpu = task_cpu(p); -+ if ((cpu != smp_processor_id()) && task_curr(p)) -+ smp_sched_reschedule(cpu); -+ preempt_enable(); -+} -+EXPORT_SYMBOL_GPL(kick_process); -+#endif -+ -+/* -+ * RT tasks preempt purely on priority. SCHED_NORMAL tasks preempt on the -+ * basis of earlier deadlines. SCHED_IDLEPRIO don't preempt anything else or -+ * between themselves, they cooperatively multitask. An idle rq scores as -+ * prio PRIO_LIMIT so it is always preempted. -+ */ -+static inline bool -+can_preempt(struct task_struct *p, int prio, u64 deadline) -+{ -+ /* Better static priority RT task or better policy preemption */ -+ if (p->prio < prio) -+ return true; -+ if (p->prio > prio) -+ return false; -+ if (p->policy == SCHED_BATCH) -+ return false; -+ /* SCHED_NORMAL and ISO will preempt based on deadline */ -+ if (!deadline_before(p->deadline, deadline)) -+ return false; -+ return true; -+} -+ -+#ifdef CONFIG_SMP -+/* -+ * Check to see if p can run on cpu, and if not, whether there are any online -+ * CPUs it can run on instead. -+ */ -+static inline bool needs_other_cpu(struct task_struct *p, int cpu) -+{ -+ if (unlikely(!cpumask_test_cpu(cpu, &p->cpus_allowed))) -+ return true; -+ return false; -+} -+#define cpu_online_map (*(cpumask_t *)cpu_online_mask) -+ -+static void try_preempt(struct task_struct *p, struct rq *this_rq) -+{ -+ int i, this_entries = rq_load(this_rq); -+ cpumask_t tmp; -+ -+ if (suitable_idle_cpus(p) && resched_best_idle(p, task_cpu(p))) -+ return; -+ -+ /* IDLEPRIO tasks never preempt anything but idle */ -+ if (p->policy == SCHED_IDLEPRIO) -+ return; -+ -+ cpumask_and(&tmp, &cpu_online_map, &p->cpus_allowed); -+ -+ for (i = 0; i < num_possible_cpus(); i++) { -+ struct rq *rq = this_rq->rq_order[i]; -+ -+ if (!cpumask_test_cpu(rq->cpu, &tmp)) -+ continue; -+ -+ if (!sched_interactive && rq != this_rq && rq_load(rq) <= this_entries) -+ continue; -+ if (smt_schedule(p, rq) && can_preempt(p, rq->rq_prio, rq->rq_deadline)) { -+ /* We set rq->preempting lockless, it's a hint only */ -+ rq->preempting = p; -+ resched_curr(rq); -+ return; -+ } -+ } -+} -+ -+static int __set_cpus_allowed_ptr(struct task_struct *p, -+ const struct cpumask *new_mask, bool check); -+#else /* CONFIG_SMP */ -+static inline bool needs_other_cpu(struct task_struct *p, int cpu) -+{ -+ return false; -+} -+ -+static void try_preempt(struct task_struct *p, struct rq *this_rq) -+{ -+ if (p->policy == SCHED_IDLEPRIO) -+ return; -+ if (can_preempt(p, uprq->rq_prio, uprq->rq_deadline)) -+ resched_curr(uprq); -+} -+ -+static inline int __set_cpus_allowed_ptr(struct task_struct *p, -+ const struct cpumask *new_mask, bool check) -+{ -+ return set_cpus_allowed_ptr(p, new_mask); -+} -+#endif /* CONFIG_SMP */ -+ -+/* -+ * wake flags -+ */ -+#define WF_SYNC 0x01 /* waker goes to sleep after wakeup */ -+#define WF_FORK 0x02 /* child wakeup after fork */ -+#define WF_MIGRATED 0x04 /* internal use, task got migrated */ -+ -+static void -+ttwu_stat(struct task_struct *p, int cpu, int wake_flags) -+{ -+ struct rq *rq; -+ -+ if (!schedstat_enabled()) -+ return; -+ -+ rq = this_rq(); -+ -+#ifdef CONFIG_SMP -+ if (cpu == rq->cpu) -+ schedstat_inc(rq->ttwu_local); -+ else { -+ struct sched_domain *sd; -+ -+ rcu_read_lock(); -+ for_each_domain(rq->cpu, sd) { -+ if (cpumask_test_cpu(cpu, sched_domain_span(sd))) { -+ schedstat_inc(sd->ttwu_wake_remote); -+ break; -+ } -+ } -+ rcu_read_unlock(); -+ } -+ -+#endif /* CONFIG_SMP */ -+ -+ schedstat_inc(rq->ttwu_count); -+} -+ -+static inline void ttwu_activate(struct rq *rq, struct task_struct *p) -+{ -+ activate_task(p, rq); -+ -+ /* if a worker is waking up, notify the workqueue */ -+ if (p->flags & PF_WQ_WORKER) -+ wq_worker_waking_up(p, cpu_of(rq)); -+} -+ -+/* -+ * Mark the task runnable and perform wakeup-preemption. -+ */ -+static void ttwu_do_wakeup(struct rq *rq, struct task_struct *p, int wake_flags) -+{ -+ /* -+ * Sync wakeups (i.e. those types of wakeups where the waker -+ * has indicated that it will leave the CPU in short order) -+ * don't trigger a preemption if there are no idle cpus, -+ * instead waiting for current to deschedule. -+ */ -+ if (wake_flags & WF_SYNC) -+ resched_suitable_idle(p); -+ else -+ try_preempt(p, rq); -+ p->state = TASK_RUNNING; -+ trace_sched_wakeup(p); -+} -+ -+static void -+ttwu_do_activate(struct rq *rq, struct task_struct *p, int wake_flags) -+{ -+ lockdep_assert_held(&rq->lock); -+ -+#ifdef CONFIG_SMP -+ if (p->sched_contributes_to_load) -+ rq->nr_uninterruptible--; -+#endif -+ -+ ttwu_activate(rq, p); -+ ttwu_do_wakeup(rq, p, wake_flags); -+} -+ -+/* -+ * Called in case the task @p isn't fully descheduled from its runqueue, -+ * in this case we must do a remote wakeup. Its a 'light' wakeup though, -+ * since all we need to do is flip p->state to TASK_RUNNING, since -+ * the task is still ->on_rq. -+ */ -+static int ttwu_remote(struct task_struct *p, int wake_flags) -+{ -+ struct rq *rq; -+ int ret = 0; -+ -+ rq = __task_rq_lock(p); -+ if (likely(task_on_rq_queued(p))) { -+ ttwu_do_wakeup(rq, p, wake_flags); -+ ret = 1; -+ } -+ __task_rq_unlock(rq); -+ -+ return ret; -+} -+ -+#ifdef CONFIG_SMP -+void sched_ttwu_pending(void) -+{ -+ struct rq *rq = this_rq(); -+ struct llist_node *llist = llist_del_all(&rq->wake_list); -+ struct task_struct *p, *t; -+ unsigned long flags; -+ -+ if (!llist) -+ return; -+ -+ rq_lock_irqsave(rq, &flags); -+ -+ llist_for_each_entry_safe(p, t, llist, wake_entry) -+ ttwu_do_activate(rq, p, 0); -+ -+ rq_unlock_irqrestore(rq, &flags); -+} -+ -+void scheduler_ipi(void) -+{ -+ /* -+ * Fold TIF_NEED_RESCHED into the preempt_count; anybody setting -+ * TIF_NEED_RESCHED remotely (for the first time) will also send -+ * this IPI. -+ */ -+ preempt_fold_need_resched(); -+ -+ if (llist_empty(&this_rq()->wake_list) && (!idle_cpu(smp_processor_id()) || need_resched())) -+ return; -+ -+ /* -+ * Not all reschedule IPI handlers call irq_enter/irq_exit, since -+ * traditionally all their work was done from the interrupt return -+ * path. Now that we actually do some work, we need to make sure -+ * we do call them. -+ * -+ * Some archs already do call them, luckily irq_enter/exit nest -+ * properly. -+ * -+ * Arguably we should visit all archs and update all handlers, -+ * however a fair share of IPIs are still resched only so this would -+ * somewhat pessimize the simple resched case. -+ */ -+ irq_enter(); -+ sched_ttwu_pending(); -+ irq_exit(); -+} -+ -+static void ttwu_queue_remote(struct task_struct *p, int cpu, int wake_flags) -+{ -+ struct rq *rq = cpu_rq(cpu); -+ -+ if (llist_add(&p->wake_entry, &cpu_rq(cpu)->wake_list)) { -+ if (!set_nr_if_polling(rq->idle)) -+ smp_sched_reschedule(cpu); -+ else -+ trace_sched_wake_idle_without_ipi(cpu); -+ } -+} -+ -+void wake_up_if_idle(int cpu) -+{ -+ struct rq *rq = cpu_rq(cpu); -+ unsigned long flags; -+ -+ rcu_read_lock(); -+ -+ if (!is_idle_task(rcu_dereference(rq->curr))) -+ goto out; -+ -+ if (set_nr_if_polling(rq->idle)) { -+ trace_sched_wake_idle_without_ipi(cpu); -+ } else { -+ rq_lock_irqsave(rq, &flags); -+ if (likely(is_idle_task(rq->curr))) -+ smp_sched_reschedule(cpu); -+ /* Else cpu is not in idle, do nothing here */ -+ rq_unlock_irqrestore(rq, &flags); -+ } -+ -+out: -+ rcu_read_unlock(); -+} -+ -+static int valid_task_cpu(struct task_struct *p) -+{ -+ cpumask_t valid_mask; -+ -+ if (p->flags & PF_KTHREAD) -+ cpumask_and(&valid_mask, &p->cpus_allowed, cpu_online_mask); -+ else -+ cpumask_and(&valid_mask, &p->cpus_allowed, cpu_active_mask); -+ -+ if (unlikely(!cpumask_weight(&valid_mask))) { -+ /* Hotplug boot threads do this before the CPU is up */ -+ printk(KERN_INFO "SCHED: No cpumask for %s/%d weight %d\n", p->comm, p->pid, cpumask_weight(&p->cpus_allowed)); -+ return cpumask_any(&p->cpus_allowed); -+ } -+ return cpumask_any(&valid_mask); -+} -+ -+/* -+ * For a task that's just being woken up we have a valuable balancing -+ * opportunity so choose the nearest cache most lightly loaded runqueue. -+ * Entered with rq locked and returns with the chosen runqueue locked. -+ */ -+static inline int select_best_cpu(struct task_struct *p) -+{ -+ unsigned int idlest = ~0U; -+ struct rq *rq = NULL; -+ int i; -+ -+ if (suitable_idle_cpus(p)) { -+ int cpu = task_cpu(p); -+ -+ if (unlikely(needs_other_cpu(p, cpu))) -+ cpu = valid_task_cpu(p); -+ rq = resched_best_idle(p, cpu); -+ if (likely(rq)) -+ return rq->cpu; -+ } -+ -+ for (i = 0; i < num_possible_cpus(); i++) { -+ struct rq *other_rq = task_rq(p)->rq_order[i]; -+ int entries; -+ -+ if (!other_rq->online) -+ continue; -+ if (needs_other_cpu(p, other_rq->cpu)) -+ continue; -+ entries = rq_load(other_rq); -+ if (entries >= idlest) -+ continue; -+ idlest = entries; -+ rq = other_rq; -+ } -+ if (unlikely(!rq)) -+ return task_cpu(p); -+ return rq->cpu; -+} -+#else /* CONFIG_SMP */ -+static int valid_task_cpu(struct task_struct *p) -+{ -+ return 0; -+} -+ -+static inline int select_best_cpu(struct task_struct *p) -+{ -+ return 0; -+} -+ -+static struct rq *resched_best_idle(struct task_struct *p, int cpu) -+{ -+ return NULL; -+} -+#endif /* CONFIG_SMP */ -+ -+static void ttwu_queue(struct task_struct *p, int cpu, int wake_flags) -+{ -+ struct rq *rq = cpu_rq(cpu); -+ -+#if defined(CONFIG_SMP) -+ if (!cpus_share_cache(smp_processor_id(), cpu)) { -+ sched_clock_cpu(cpu); /* Sync clocks across CPUs */ -+ ttwu_queue_remote(p, cpu, wake_flags); -+ return; -+ } -+#endif -+ rq_lock(rq); -+ ttwu_do_activate(rq, p, wake_flags); -+ rq_unlock(rq); -+} -+ -+/*** -+ * try_to_wake_up - wake up a thread -+ * @p: the thread to be awakened -+ * @state: the mask of task states that can be woken -+ * @wake_flags: wake modifier flags (WF_*) -+ * -+ * Put it on the run-queue if it's not already there. The "current" -+ * thread is always on the run-queue (except when the actual -+ * re-schedule is in progress), and as such you're allowed to do -+ * the simpler "current->state = TASK_RUNNING" to mark yourself -+ * runnable without the overhead of this. -+ * -+ * Return: %true if @p was woken up, %false if it was already running. -+ * or @state didn't match @p's state. -+ */ -+static int -+try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) -+{ -+ unsigned long flags; -+ int cpu, success = 0; -+ -+ /* -+ * If we are going to wake up a thread waiting for CONDITION we -+ * need to ensure that CONDITION=1 done by the caller can not be -+ * reordered with p->state check below. This pairs with mb() in -+ * set_current_state() the waiting thread does. -+ */ -+ raw_spin_lock_irqsave(&p->pi_lock, flags); -+ smp_mb__after_spinlock(); -+ /* state is a volatile long, どうして、分からない */ -+ if (!((unsigned int)p->state & state)) -+ goto out; -+ -+ trace_sched_waking(p); -+ -+ /* We're going to change ->state: */ -+ success = 1; -+ cpu = task_cpu(p); -+ -+ /* -+ * Ensure we load p->on_rq _after_ p->state, otherwise it would -+ * be possible to, falsely, observe p->on_rq == 0 and get stuck -+ * in smp_cond_load_acquire() below. -+ * -+ * sched_ttwu_pending() try_to_wake_up() -+ * [S] p->on_rq = 1; [L] P->state -+ * UNLOCK rq->lock -----. -+ * \ -+ * +--- RMB -+ * schedule() / -+ * LOCK rq->lock -----' -+ * UNLOCK rq->lock -+ * -+ * [task p] -+ * [S] p->state = UNINTERRUPTIBLE [L] p->on_rq -+ * -+ * Pairs with the UNLOCK+LOCK on rq->lock from the -+ * last wakeup of our task and the schedule that got our task -+ * current. -+ */ -+ smp_rmb(); -+ if (p->on_rq && ttwu_remote(p, wake_flags)) -+ goto stat; -+ -+#ifdef CONFIG_SMP -+ /* -+ * Ensure we load p->on_cpu _after_ p->on_rq, otherwise it would be -+ * possible to, falsely, observe p->on_cpu == 0. -+ * -+ * One must be running (->on_cpu == 1) in order to remove oneself -+ * from the runqueue. -+ * -+ * [S] ->on_cpu = 1; [L] ->on_rq -+ * UNLOCK rq->lock -+ * RMB -+ * LOCK rq->lock -+ * [S] ->on_rq = 0; [L] ->on_cpu -+ * -+ * Pairs with the full barrier implied in the UNLOCK+LOCK on rq->lock -+ * from the consecutive calls to schedule(); the first switching to our -+ * task, the second putting it to sleep. -+ */ -+ smp_rmb(); -+ -+ /* -+ * If the owning (remote) CPU is still in the middle of schedule() with -+ * this task as prev, wait until its done referencing the task. -+ * -+ * Pairs with the smp_store_release() in finish_lock_switch(). -+ * -+ * This ensures that tasks getting woken will be fully ordered against -+ * their previous state and preserve Program Order. -+ */ -+ smp_cond_load_acquire(&p->on_cpu, !VAL); -+ -+ p->sched_contributes_to_load = !!task_contributes_to_load(p); -+ p->state = TASK_WAKING; -+ -+ if (p->in_iowait) { -+ delayacct_blkio_end(); -+ atomic_dec(&task_rq(p)->nr_iowait); -+ } -+ -+ cpu = select_best_cpu(p); -+ if (task_cpu(p) != cpu) -+ set_task_cpu(p, cpu); -+ -+#else /* CONFIG_SMP */ -+ -+ if (p->in_iowait) { -+ delayacct_blkio_end(); -+ atomic_dec(&task_rq(p)->nr_iowait); -+ } -+ -+#endif /* CONFIG_SMP */ -+ -+ ttwu_queue(p, cpu, wake_flags); -+stat: -+ ttwu_stat(p, cpu, wake_flags); -+out: -+ raw_spin_unlock_irqrestore(&p->pi_lock, flags); -+ -+ return success; -+} -+ -+/** -+ * try_to_wake_up_local - try to wake up a local task with rq lock held -+ * @p: the thread to be awakened -+ * -+ * Put @p on the run-queue if it's not already there. The caller must -+ * ensure that rq is locked and, @p is not the current task. -+ * rq stays locked over invocation. -+ */ -+static void try_to_wake_up_local(struct task_struct *p) -+{ -+ struct rq *rq = task_rq(p); -+ -+ if (WARN_ON_ONCE(rq != this_rq()) || -+ WARN_ON_ONCE(p == current)) -+ return; -+ -+ lockdep_assert_held(&rq->lock); -+ -+ if (!raw_spin_trylock(&p->pi_lock)) { -+ /* -+ * This is OK, because current is on_cpu, which avoids it being -+ * picked for load-balance and preemption/IRQs are still -+ * disabled avoiding further scheduler activity on it and we've -+ * not yet picked a replacement task. -+ */ -+ rq_unlock(rq); -+ raw_spin_lock(&p->pi_lock); -+ rq_lock(rq); -+ } -+ -+ if (!(p->state & TASK_NORMAL)) -+ goto out; -+ -+ trace_sched_waking(p); -+ -+ if (!task_on_rq_queued(p)) { -+ if (p->in_iowait) { -+ delayacct_blkio_end(); -+ atomic_dec(&rq->nr_iowait); -+ } -+ ttwu_activate(rq, p); -+ } -+ -+ ttwu_do_wakeup(rq, p, 0); -+ ttwu_stat(p, smp_processor_id(), 0); -+out: -+ raw_spin_unlock(&p->pi_lock); -+} -+ -+/** -+ * wake_up_process - Wake up a specific process -+ * @p: The process to be woken up. -+ * -+ * Attempt to wake up the nominated process and move it to the set of runnable -+ * processes. -+ * -+ * Return: 1 if the process was woken up, 0 if it was already running. -+ * -+ * It may be assumed that this function implies a write memory barrier before -+ * changing the task state if and only if any tasks are woken up. -+ */ -+int wake_up_process(struct task_struct *p) -+{ -+ return try_to_wake_up(p, TASK_NORMAL, 0); -+} -+EXPORT_SYMBOL(wake_up_process); -+ -+int wake_up_state(struct task_struct *p, unsigned int state) -+{ -+ return try_to_wake_up(p, state, 0); -+} -+ -+static void time_slice_expired(struct task_struct *p, struct rq *rq); -+ -+/* -+ * Perform scheduler related setup for a newly forked process p. -+ * p is forked by current. -+ */ -+int sched_fork(unsigned long __maybe_unused clone_flags, struct task_struct *p) -+{ -+ unsigned long flags; -+ int cpu = get_cpu(); -+ -+#ifdef CONFIG_PREEMPT_NOTIFIERS -+ INIT_HLIST_HEAD(&p->preempt_notifiers); -+#endif -+ /* -+ * We mark the process as NEW here. This guarantees that -+ * nobody will actually run it, and a signal or other external -+ * event cannot wake it up and insert it on the runqueue either. -+ */ -+ p->state = TASK_NEW; -+ -+ /* -+ * The process state is set to the same value of the process executing -+ * do_fork() code. That is running. This guarantees that nobody will -+ * actually run it, and a signal or other external event cannot wake -+ * it up and insert it on the runqueue either. -+ */ -+ -+ /* Should be reset in fork.c but done here for ease of MuQSS patching */ -+ p->on_cpu = -+ p->on_rq = -+ p->utime = -+ p->stime = -+ p->sched_time = -+ p->stime_ns = -+ p->utime_ns = 0; -+ skiplist_node_init(&p->node); -+ -+ /* -+ * Revert to default priority/policy on fork if requested. -+ */ -+ if (unlikely(p->sched_reset_on_fork)) { -+ if (p->policy == SCHED_FIFO || p->policy == SCHED_RR) { -+ p->policy = SCHED_NORMAL; -+ p->normal_prio = normal_prio(p); -+ } -+ -+ if (PRIO_TO_NICE(p->static_prio) < 0) { -+ p->static_prio = NICE_TO_PRIO(0); -+ p->normal_prio = p->static_prio; -+ } -+ -+ /* -+ * We don't need the reset flag anymore after the fork. It has -+ * fulfilled its duty: -+ */ -+ p->sched_reset_on_fork = 0; -+ } -+ -+ /* -+ * Silence PROVE_RCU. -+ */ -+ raw_spin_lock_irqsave(&p->pi_lock, flags); -+ set_task_cpu(p, cpu); -+ raw_spin_unlock_irqrestore(&p->pi_lock, flags); -+ -+#ifdef CONFIG_SCHED_INFO -+ if (unlikely(sched_info_on())) -+ memset(&p->sched_info, 0, sizeof(p->sched_info)); -+#endif -+ init_task_preempt_count(p); -+ -+ put_cpu(); -+ return 0; -+} -+ -+#ifdef CONFIG_SCHEDSTATS -+ -+DEFINE_STATIC_KEY_FALSE(sched_schedstats); -+static bool __initdata __sched_schedstats = false; -+ -+static void set_schedstats(bool enabled) -+{ -+ if (enabled) -+ static_branch_enable(&sched_schedstats); -+ else -+ static_branch_disable(&sched_schedstats); -+} -+ -+void force_schedstat_enabled(void) -+{ -+ if (!schedstat_enabled()) { -+ pr_info("kernel profiling enabled schedstats, disable via kernel.sched_schedstats.\n"); -+ static_branch_enable(&sched_schedstats); -+ } -+} -+ -+static int __init setup_schedstats(char *str) -+{ -+ int ret = 0; -+ if (!str) -+ goto out; -+ -+ /* -+ * This code is called before jump labels have been set up, so we can't -+ * change the static branch directly just yet. Instead set a temporary -+ * variable so init_schedstats() can do it later. -+ */ -+ if (!strcmp(str, "enable")) { -+ __sched_schedstats = true; -+ ret = 1; -+ } else if (!strcmp(str, "disable")) { -+ __sched_schedstats = false; -+ ret = 1; -+ } -+out: -+ if (!ret) -+ pr_warn("Unable to parse schedstats=\n"); -+ -+ return ret; -+} -+__setup("schedstats=", setup_schedstats); -+ -+static void __init init_schedstats(void) -+{ -+ set_schedstats(__sched_schedstats); -+} -+ -+#ifdef CONFIG_PROC_SYSCTL -+int sysctl_schedstats(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, loff_t *ppos) -+{ -+ struct ctl_table t; -+ int err; -+ int state = static_branch_likely(&sched_schedstats); -+ -+ if (write && !capable(CAP_SYS_ADMIN)) -+ return -EPERM; -+ -+ t = *table; -+ t.data = &state; -+ err = proc_dointvec_minmax(&t, write, buffer, lenp, ppos); -+ if (err < 0) -+ return err; -+ if (write) -+ set_schedstats(state); -+ return err; -+} -+#endif /* CONFIG_PROC_SYSCTL */ -+#else /* !CONFIG_SCHEDSTATS */ -+static inline void init_schedstats(void) {} -+#endif /* CONFIG_SCHEDSTATS */ -+ -+static void update_cpu_clock_switch(struct rq *rq, struct task_struct *p); -+ -+static void account_task_cpu(struct rq *rq, struct task_struct *p) -+{ -+ update_clocks(rq); -+ /* This isn't really a context switch but accounting is the same */ -+ update_cpu_clock_switch(rq, p); -+ p->last_ran = rq->niffies; -+} -+ -+bool sched_smp_initialized __read_mostly; -+ -+static inline int hrexpiry_enabled(struct rq *rq) -+{ -+ if (unlikely(!cpu_active(cpu_of(rq)) || !sched_smp_initialized)) -+ return 0; -+ return hrtimer_is_hres_active(&rq->hrexpiry_timer); -+} -+ -+/* -+ * Use HR-timers to deliver accurate preemption points. -+ */ -+static inline void hrexpiry_clear(struct rq *rq) -+{ -+ if (!hrexpiry_enabled(rq)) -+ return; -+ if (hrtimer_active(&rq->hrexpiry_timer)) -+ hrtimer_cancel(&rq->hrexpiry_timer); -+} -+ -+/* -+ * High-resolution time_slice expiry. -+ * Runs from hardirq context with interrupts disabled. -+ */ -+static enum hrtimer_restart hrexpiry(struct hrtimer *timer) -+{ -+ struct rq *rq = container_of(timer, struct rq, hrexpiry_timer); -+ struct task_struct *p; -+ -+ /* This can happen during CPU hotplug / resume */ -+ if (unlikely(cpu_of(rq) != smp_processor_id())) -+ goto out; -+ -+ /* -+ * We're doing this without the runqueue lock but this should always -+ * be run on the local CPU. Time slice should run out in __schedule -+ * but we set it to zero here in case niffies is slightly less. -+ */ -+ p = rq->curr; -+ p->time_slice = 0; -+ __set_tsk_resched(p); -+out: -+ return HRTIMER_NORESTART; -+} -+ -+/* -+ * Called to set the hrexpiry timer state. -+ * -+ * called with irqs disabled from the local CPU only -+ */ -+static void hrexpiry_start(struct rq *rq, u64 delay) -+{ -+ if (!hrexpiry_enabled(rq)) -+ return; -+ -+ hrtimer_start(&rq->hrexpiry_timer, ns_to_ktime(delay), -+ HRTIMER_MODE_REL_PINNED); -+} -+ -+static void init_rq_hrexpiry(struct rq *rq) -+{ -+ hrtimer_init(&rq->hrexpiry_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); -+ rq->hrexpiry_timer.function = hrexpiry; -+} -+ -+static inline int rq_dither(struct rq *rq) -+{ -+ if (!hrexpiry_enabled(rq)) -+ return HALF_JIFFY_US; -+ return 0; -+} -+ -+/* -+ * wake_up_new_task - wake up a newly created task for the first time. -+ * -+ * This function will do some initial scheduler statistics housekeeping -+ * that must be done for every newly created context, then puts the task -+ * on the runqueue and wakes it. -+ */ -+void wake_up_new_task(struct task_struct *p) -+{ -+ struct task_struct *parent, *rq_curr; -+ struct rq *rq, *new_rq; -+ unsigned long flags; -+ -+ parent = p->parent; -+ -+ raw_spin_lock_irqsave(&p->pi_lock, flags); -+ p->state = TASK_RUNNING; -+ /* Task_rq can't change yet on a new task */ -+ new_rq = rq = task_rq(p); -+ if (unlikely(needs_other_cpu(p, task_cpu(p)))) { -+ set_task_cpu(p, valid_task_cpu(p)); -+ new_rq = task_rq(p); -+ } -+ -+ double_rq_lock(rq, new_rq); -+ rq_curr = rq->curr; -+ -+ /* -+ * Make sure we do not leak PI boosting priority to the child. -+ */ -+ p->prio = rq_curr->normal_prio; -+ -+ trace_sched_wakeup_new(p); -+ -+ /* -+ * Share the timeslice between parent and child, thus the -+ * total amount of pending timeslices in the system doesn't change, -+ * resulting in more scheduling fairness. If it's negative, it won't -+ * matter since that's the same as being 0. rq->rq_deadline is only -+ * modified within schedule() so it is always equal to -+ * current->deadline. -+ */ -+ account_task_cpu(rq, rq_curr); -+ p->last_ran = rq_curr->last_ran; -+ if (likely(rq_curr->policy != SCHED_FIFO)) { -+ rq_curr->time_slice /= 2; -+ if (rq_curr->time_slice < RESCHED_US) { -+ /* -+ * Forking task has run out of timeslice. Reschedule it and -+ * start its child with a new time slice and deadline. The -+ * child will end up running first because its deadline will -+ * be slightly earlier. -+ */ -+ __set_tsk_resched(rq_curr); -+ time_slice_expired(p, new_rq); -+ if (suitable_idle_cpus(p)) -+ resched_best_idle(p, task_cpu(p)); -+ else if (unlikely(rq != new_rq)) -+ try_preempt(p, new_rq); -+ } else { -+ p->time_slice = rq_curr->time_slice; -+ if (rq_curr == parent && rq == new_rq && !suitable_idle_cpus(p)) { -+ /* -+ * The VM isn't cloned, so we're in a good position to -+ * do child-runs-first in anticipation of an exec. This -+ * usually avoids a lot of COW overhead. -+ */ -+ __set_tsk_resched(rq_curr); -+ } else { -+ /* -+ * Adjust the hrexpiry since rq_curr will keep -+ * running and its timeslice has been shortened. -+ */ -+ hrexpiry_start(rq, US_TO_NS(rq_curr->time_slice)); -+ try_preempt(p, new_rq); -+ } -+ } -+ } else { -+ time_slice_expired(p, new_rq); -+ try_preempt(p, new_rq); -+ } -+ activate_task(p, new_rq); -+ double_rq_unlock(rq, new_rq); -+ raw_spin_unlock_irqrestore(&p->pi_lock, flags); -+} -+ -+#ifdef CONFIG_PREEMPT_NOTIFIERS -+ -+static struct static_key preempt_notifier_key = STATIC_KEY_INIT_FALSE; -+ -+void preempt_notifier_inc(void) -+{ -+ static_key_slow_inc(&preempt_notifier_key); -+} -+EXPORT_SYMBOL_GPL(preempt_notifier_inc); -+ -+void preempt_notifier_dec(void) -+{ -+ static_key_slow_dec(&preempt_notifier_key); -+} -+EXPORT_SYMBOL_GPL(preempt_notifier_dec); -+ -+/** -+ * preempt_notifier_register - tell me when current is being preempted & rescheduled -+ * @notifier: notifier struct to register -+ */ -+void preempt_notifier_register(struct preempt_notifier *notifier) -+{ -+ if (!static_key_false(&preempt_notifier_key)) -+ WARN(1, "registering preempt_notifier while notifiers disabled\n"); -+ -+ hlist_add_head(¬ifier->link, ¤t->preempt_notifiers); -+} -+EXPORT_SYMBOL_GPL(preempt_notifier_register); -+ -+/** -+ * preempt_notifier_unregister - no longer interested in preemption notifications -+ * @notifier: notifier struct to unregister -+ * -+ * This is *not* safe to call from within a preemption notifier. -+ */ -+void preempt_notifier_unregister(struct preempt_notifier *notifier) -+{ -+ hlist_del(¬ifier->link); -+} -+EXPORT_SYMBOL_GPL(preempt_notifier_unregister); -+ -+static void __fire_sched_in_preempt_notifiers(struct task_struct *curr) -+{ -+ struct preempt_notifier *notifier; -+ -+ hlist_for_each_entry(notifier, &curr->preempt_notifiers, link) -+ notifier->ops->sched_in(notifier, raw_smp_processor_id()); -+} -+ -+static __always_inline void fire_sched_in_preempt_notifiers(struct task_struct *curr) -+{ -+ if (static_key_false(&preempt_notifier_key)) -+ __fire_sched_in_preempt_notifiers(curr); -+} -+ -+static void -+__fire_sched_out_preempt_notifiers(struct task_struct *curr, -+ struct task_struct *next) -+{ -+ struct preempt_notifier *notifier; -+ -+ hlist_for_each_entry(notifier, &curr->preempt_notifiers, link) -+ notifier->ops->sched_out(notifier, next); -+} -+ -+static __always_inline void -+fire_sched_out_preempt_notifiers(struct task_struct *curr, -+ struct task_struct *next) -+{ -+ if (static_key_false(&preempt_notifier_key)) -+ __fire_sched_out_preempt_notifiers(curr, next); -+} -+ -+#else /* !CONFIG_PREEMPT_NOTIFIERS */ -+ -+static inline void fire_sched_in_preempt_notifiers(struct task_struct *curr) -+{ -+} -+ -+static inline void -+fire_sched_out_preempt_notifiers(struct task_struct *curr, -+ struct task_struct *next) -+{ -+} -+ -+#endif /* CONFIG_PREEMPT_NOTIFIERS */ -+ -+/** -+ * prepare_task_switch - prepare to switch tasks -+ * @rq: the runqueue preparing to switch -+ * @next: the task we are going to switch to. -+ * -+ * This is called with the rq lock held and interrupts off. It must -+ * be paired with a subsequent finish_task_switch after the context -+ * switch. -+ * -+ * prepare_task_switch sets up locking and calls architecture specific -+ * hooks. -+ */ -+static inline void -+prepare_task_switch(struct rq *rq, struct task_struct *prev, -+ struct task_struct *next) -+{ -+ sched_info_switch(rq, prev, next); -+ perf_event_task_sched_out(prev, next); -+ fire_sched_out_preempt_notifiers(prev, next); -+ prepare_lock_switch(rq, next); -+ prepare_arch_switch(next); -+} -+ -+/** -+ * finish_task_switch - clean up after a task-switch -+ * @rq: runqueue associated with task-switch -+ * @prev: the thread we just switched away from. -+ * -+ * finish_task_switch must be called after the context switch, paired -+ * with a prepare_task_switch call before the context switch. -+ * finish_task_switch will reconcile locking set up by prepare_task_switch, -+ * and do any other architecture-specific cleanup actions. -+ * -+ * Note that we may have delayed dropping an mm in context_switch(). If -+ * so, we finish that here outside of the runqueue lock. (Doing it -+ * with the lock held can cause deadlocks; see schedule() for -+ * details.) -+ * -+ * The context switch have flipped the stack from under us and restored the -+ * local variables which were saved when this task called schedule() in the -+ * past. prev == current is still correct but we need to recalculate this_rq -+ * because prev may have moved to another CPU. -+ */ -+static void finish_task_switch(struct task_struct *prev) -+ __releases(rq->lock) -+{ -+ struct rq *rq = this_rq(); -+ struct mm_struct *mm = rq->prev_mm; -+ long prev_state; -+ -+ /* -+ * The previous task will have left us with a preempt_count of 2 -+ * because it left us after: -+ * -+ * schedule() -+ * preempt_disable(); // 1 -+ * __schedule() -+ * raw_spin_lock_irq(&rq->lock) // 2 -+ * -+ * Also, see FORK_PREEMPT_COUNT. -+ */ -+ if (WARN_ONCE(preempt_count() != 2*PREEMPT_DISABLE_OFFSET, -+ "corrupted preempt_count: %s/%d/0x%x\n", -+ current->comm, current->pid, preempt_count())) -+ preempt_count_set(FORK_PREEMPT_COUNT); -+ -+ rq->prev_mm = NULL; -+ -+ /* -+ * A task struct has one reference for the use as "current". -+ * If a task dies, then it sets TASK_DEAD in tsk->state and calls -+ * schedule one last time. The schedule call will never return, and -+ * the scheduled task must drop that reference. -+ * -+ * We must observe prev->state before clearing prev->on_cpu (in -+ * finish_lock_switch), otherwise a concurrent wakeup can get prev -+ * running on another CPU and we could rave with its RUNNING -> DEAD -+ * transition, resulting in a double drop. -+ */ -+ prev_state = prev->state; -+ vtime_task_switch(prev); -+ perf_event_task_sched_in(prev, current); -+ /* -+ * The membarrier system call requires a full memory barrier -+ * after storing to rq->curr, before going back to user-space. -+ * -+ * TODO: This smp_mb__after_unlock_lock can go away if PPC end -+ * up adding a full barrier to switch_mm(), or we should figure -+ * out if a smp_mb__after_unlock_lock is really the proper API -+ * to use. -+ */ -+ smp_mb__after_unlock_lock(); -+ finish_lock_switch(rq, prev); -+ finish_arch_post_lock_switch(); -+ -+ fire_sched_in_preempt_notifiers(current); -+ if (mm) -+ mmdrop(mm); -+ if (unlikely(prev_state == TASK_DEAD)) { -+ /* -+ * Remove function-return probe instances associated with this -+ * task and put them back on the free list. -+ */ -+ kprobe_flush_task(prev); -+ -+ /* Task is done with its stack. */ -+ put_task_stack(prev); -+ -+ put_task_struct(prev); -+ } -+} -+ -+/** -+ * schedule_tail - first thing a freshly forked thread must call. -+ * @prev: the thread we just switched away from. -+ */ -+asmlinkage __visible void schedule_tail(struct task_struct *prev) -+{ -+ /* -+ * New tasks start with FORK_PREEMPT_COUNT, see there and -+ * finish_task_switch() for details. -+ * -+ * finish_task_switch() will drop rq->lock() and lower preempt_count -+ * and the preempt_enable() will end up enabling preemption (on -+ * PREEMPT_COUNT kernels). -+ */ -+ -+ finish_task_switch(prev); -+ preempt_enable(); -+ -+ if (current->set_child_tid) -+ put_user(task_pid_vnr(current), current->set_child_tid); -+} -+ -+/* -+ * context_switch - switch to the new MM and the new thread's register state. -+ */ -+static __always_inline void -+context_switch(struct rq *rq, struct task_struct *prev, -+ struct task_struct *next) -+{ -+ struct mm_struct *mm, *oldmm; -+ -+ prepare_task_switch(rq, prev, next); -+ -+ mm = next->mm; -+ oldmm = prev->active_mm; -+ /* -+ * For paravirt, this is coupled with an exit in switch_to to -+ * combine the page table reload and the switch backend into -+ * one hypercall. -+ */ -+ arch_start_context_switch(prev); -+ -+ if (!mm) { -+ next->active_mm = oldmm; -+ mmgrab(oldmm); -+ enter_lazy_tlb(oldmm, next); -+ } else -+ switch_mm_irqs_off(oldmm, mm, next); -+ -+ if (!prev->mm) { -+ prev->active_mm = NULL; -+ rq->prev_mm = oldmm; -+ } -+ /* -+ * Since the runqueue lock will be released by the next -+ * task (which is an invalid locking op but in the case -+ * of the scheduler it's an obvious special-case), so we -+ * do an early lockdep release here: -+ */ -+ spin_release(&rq->lock.dep_map, 1, _THIS_IP_); -+ -+ /* Here we just switch the register state and the stack. */ -+ switch_to(prev, next, prev); -+ barrier(); -+ -+ finish_task_switch(prev); -+} -+ -+/* -+ * nr_running, nr_uninterruptible and nr_context_switches: -+ * -+ * externally visible scheduler statistics: current number of runnable -+ * threads, total number of context switches performed since bootup. -+ */ -+unsigned long nr_running(void) -+{ -+ unsigned long i, sum = 0; -+ -+ for_each_online_cpu(i) -+ sum += cpu_rq(i)->nr_running; -+ -+ return sum; -+} -+ -+static unsigned long nr_uninterruptible(void) -+{ -+ unsigned long i, sum = 0; -+ -+ for_each_online_cpu(i) -+ sum += cpu_rq(i)->nr_uninterruptible; -+ -+ return sum; -+} -+ -+/* -+ * Check if only the current task is running on the CPU. -+ * -+ * Caution: this function does not check that the caller has disabled -+ * preemption, thus the result might have a time-of-check-to-time-of-use -+ * race. The caller is responsible to use it correctly, for example: -+ * -+ * - from a non-preemptable section (of course) -+ * -+ * - from a thread that is bound to a single CPU -+ * -+ * - in a loop with very short iterations (e.g. a polling loop) -+ */ -+bool single_task_running(void) -+{ -+ struct rq *rq = cpu_rq(smp_processor_id()); -+ -+ if (rq_load(rq) == 1) -+ return true; -+ else -+ return false; -+} -+EXPORT_SYMBOL(single_task_running); -+ -+unsigned long long nr_context_switches(void) -+{ -+ int i; -+ unsigned long long sum = 0; -+ -+ for_each_possible_cpu(i) -+ sum += cpu_rq(i)->nr_switches; -+ -+ return sum; -+} -+ -+/* -+ * IO-wait accounting, and how its mostly bollocks (on SMP). -+ * -+ * The idea behind IO-wait account is to account the idle time that we could -+ * have spend running if it were not for IO. That is, if we were to improve the -+ * storage performance, we'd have a proportional reduction in IO-wait time. -+ * -+ * This all works nicely on UP, where, when a task blocks on IO, we account -+ * idle time as IO-wait, because if the storage were faster, it could've been -+ * running and we'd not be idle. -+ * -+ * This has been extended to SMP, by doing the same for each CPU. This however -+ * is broken. -+ * -+ * Imagine for instance the case where two tasks block on one CPU, only the one -+ * CPU will have IO-wait accounted, while the other has regular idle. Even -+ * though, if the storage were faster, both could've ran at the same time, -+ * utilising both CPUs. -+ * -+ * This means, that when looking globally, the current IO-wait accounting on -+ * SMP is a lower bound, by reason of under accounting. -+ * -+ * Worse, since the numbers are provided per CPU, they are sometimes -+ * interpreted per CPU, and that is nonsensical. A blocked task isn't strictly -+ * associated with any one particular CPU, it can wake to another CPU than it -+ * blocked on. This means the per CPU IO-wait number is meaningless. -+ * -+ * Task CPU affinities can make all that even more 'interesting'. -+ */ -+ -+unsigned long nr_iowait(void) -+{ -+ unsigned long i, sum = 0; -+ -+ for_each_possible_cpu(i) -+ sum += atomic_read(&cpu_rq(i)->nr_iowait); -+ -+ return sum; -+} -+ -+/* -+ * Consumers of these two interfaces, like for example the cpufreq menu -+ * governor are using nonsensical data. Boosting frequency for a CPU that has -+ * IO-wait which might not even end up running the task when it does become -+ * runnable. -+ */ -+ -+unsigned long nr_iowait_cpu(int cpu) -+{ -+ struct rq *this = cpu_rq(cpu); -+ return atomic_read(&this->nr_iowait); -+} -+ -+unsigned long nr_active(void) -+{ -+ return nr_running() + nr_uninterruptible(); -+} -+ -+/* -+ * I/O wait is the number of running or queued tasks with their ->rq pointer -+ * set to this cpu as being the CPU they're more likely to run on. -+ */ -+void get_iowait_load(unsigned long *nr_waiters, unsigned long *load) -+{ -+ struct rq *rq = this_rq(); -+ -+ *nr_waiters = atomic_read(&rq->nr_iowait); -+ *load = rq_load(rq); -+} -+ -+/* Variables and functions for calc_load */ -+static unsigned long calc_load_update; -+unsigned long avenrun[3]; -+EXPORT_SYMBOL(avenrun); -+ -+/** -+ * get_avenrun - get the load average array -+ * @loads: pointer to dest load array -+ * @offset: offset to add -+ * @shift: shift count to shift the result left -+ * -+ * These values are estimates at best, so no need for locking. -+ */ -+void get_avenrun(unsigned long *loads, unsigned long offset, int shift) -+{ -+ loads[0] = (avenrun[0] + offset) << shift; -+ loads[1] = (avenrun[1] + offset) << shift; -+ loads[2] = (avenrun[2] + offset) << shift; -+} -+ -+static unsigned long -+calc_load(unsigned long load, unsigned long exp, unsigned long active) -+{ -+ unsigned long newload; -+ -+ newload = load * exp + active * (FIXED_1 - exp); -+ if (active >= load) -+ newload += FIXED_1-1; -+ -+ return newload / FIXED_1; -+} -+ -+/* -+ * calc_load - update the avenrun load estimates every LOAD_FREQ seconds. -+ */ -+void calc_global_load(unsigned long ticks) -+{ -+ long active; -+ -+ if (time_before(jiffies, READ_ONCE(calc_load_update))) -+ return; -+ active = nr_active() * FIXED_1; -+ -+ avenrun[0] = calc_load(avenrun[0], EXP_1, active); -+ avenrun[1] = calc_load(avenrun[1], EXP_5, active); -+ avenrun[2] = calc_load(avenrun[2], EXP_15, active); -+ -+ calc_load_update = jiffies + LOAD_FREQ; -+} -+ -+DEFINE_PER_CPU(struct kernel_stat, kstat); -+DEFINE_PER_CPU(struct kernel_cpustat, kernel_cpustat); -+ -+EXPORT_PER_CPU_SYMBOL(kstat); -+EXPORT_PER_CPU_SYMBOL(kernel_cpustat); -+ -+#ifdef CONFIG_PARAVIRT -+static inline u64 steal_ticks(u64 steal) -+{ -+ if (unlikely(steal > NSEC_PER_SEC)) -+ return div_u64(steal, TICK_NSEC); -+ -+ return __iter_div_u64_rem(steal, TICK_NSEC, &steal); -+} -+#endif -+ -+#ifndef nsecs_to_cputime -+# define nsecs_to_cputime(__nsecs) nsecs_to_jiffies(__nsecs) -+#endif -+ -+/* -+ * On each tick, add the number of nanoseconds to the unbanked variables and -+ * once one tick's worth has accumulated, account it allowing for accurate -+ * sub-tick accounting and totals. -+ */ -+static void pc_idle_time(struct rq *rq, struct task_struct *idle, unsigned long ns) -+{ -+ u64 *cpustat = kcpustat_this_cpu->cpustat; -+ unsigned long ticks; -+ -+ if (atomic_read(&rq->nr_iowait) > 0) { -+ rq->iowait_ns += ns; -+ if (rq->iowait_ns >= JIFFY_NS) { -+ ticks = NS_TO_JIFFIES(rq->iowait_ns); -+ cpustat[CPUTIME_IOWAIT] += (__force u64)TICK_NSEC * ticks; -+ rq->iowait_ns %= JIFFY_NS; -+ } -+ } else { -+ rq->idle_ns += ns; -+ if (rq->idle_ns >= JIFFY_NS) { -+ ticks = NS_TO_JIFFIES(rq->idle_ns); -+ cpustat[CPUTIME_IDLE] += (__force u64)TICK_NSEC * ticks; -+ rq->idle_ns %= JIFFY_NS; -+ } -+ } -+ acct_update_integrals(idle); -+} -+ -+static void pc_system_time(struct rq *rq, struct task_struct *p, -+ int hardirq_offset, unsigned long ns) -+{ -+ u64 *cpustat = kcpustat_this_cpu->cpustat; -+ unsigned long ticks; -+ -+ p->stime_ns += ns; -+ if (p->stime_ns >= JIFFY_NS) { -+ ticks = NS_TO_JIFFIES(p->stime_ns); -+ p->stime_ns %= JIFFY_NS; -+ p->stime += (__force u64)TICK_NSEC * ticks; -+ account_group_system_time(p, TICK_NSEC * ticks); -+ } -+ p->sched_time += ns; -+ account_group_exec_runtime(p, ns); -+ -+ if (hardirq_count() - hardirq_offset) { -+ rq->irq_ns += ns; -+ if (rq->irq_ns >= JIFFY_NS) { -+ ticks = NS_TO_JIFFIES(rq->irq_ns); -+ cpustat[CPUTIME_IRQ] += (__force u64)TICK_NSEC * ticks; -+ rq->irq_ns %= JIFFY_NS; -+ } -+ } else if (in_serving_softirq()) { -+ rq->softirq_ns += ns; -+ if (rq->softirq_ns >= JIFFY_NS) { -+ ticks = NS_TO_JIFFIES(rq->softirq_ns); -+ cpustat[CPUTIME_SOFTIRQ] += (__force u64)TICK_NSEC * ticks; -+ rq->softirq_ns %= JIFFY_NS; -+ } -+ } else { -+ rq->system_ns += ns; -+ if (rq->system_ns >= JIFFY_NS) { -+ ticks = NS_TO_JIFFIES(rq->system_ns); -+ cpustat[CPUTIME_SYSTEM] += (__force u64)TICK_NSEC * ticks; -+ rq->system_ns %= JIFFY_NS; -+ } -+ } -+ acct_update_integrals(p); -+} -+ -+static void pc_user_time(struct rq *rq, struct task_struct *p, unsigned long ns) -+{ -+ u64 *cpustat = kcpustat_this_cpu->cpustat; -+ unsigned long ticks; -+ -+ p->utime_ns += ns; -+ if (p->utime_ns >= JIFFY_NS) { -+ ticks = NS_TO_JIFFIES(p->utime_ns); -+ p->utime_ns %= JIFFY_NS; -+ p->utime += (__force u64)TICK_NSEC * ticks; -+ account_group_user_time(p, TICK_NSEC * ticks); -+ } -+ p->sched_time += ns; -+ account_group_exec_runtime(p, ns); -+ -+ if (this_cpu_ksoftirqd() == p) { -+ /* -+ * ksoftirqd time do not get accounted in cpu_softirq_time. -+ * So, we have to handle it separately here. -+ */ -+ rq->softirq_ns += ns; -+ if (rq->softirq_ns >= JIFFY_NS) { -+ ticks = NS_TO_JIFFIES(rq->softirq_ns); -+ cpustat[CPUTIME_SOFTIRQ] += (__force u64)TICK_NSEC * ticks; -+ rq->softirq_ns %= JIFFY_NS; -+ } -+ } -+ -+ if (task_nice(p) > 0 || idleprio_task(p)) { -+ rq->nice_ns += ns; -+ if (rq->nice_ns >= JIFFY_NS) { -+ ticks = NS_TO_JIFFIES(rq->nice_ns); -+ cpustat[CPUTIME_NICE] += (__force u64)TICK_NSEC * ticks; -+ rq->nice_ns %= JIFFY_NS; -+ } -+ } else { -+ rq->user_ns += ns; -+ if (rq->user_ns >= JIFFY_NS) { -+ ticks = NS_TO_JIFFIES(rq->user_ns); -+ cpustat[CPUTIME_USER] += (__force u64)TICK_NSEC * ticks; -+ rq->user_ns %= JIFFY_NS; -+ } -+ } -+ acct_update_integrals(p); -+} -+ -+/* -+ * This is called on clock ticks. -+ * Bank in p->sched_time the ns elapsed since the last tick or switch. -+ * CPU scheduler quota accounting is also performed here in microseconds. -+ */ -+static void update_cpu_clock_tick(struct rq *rq, struct task_struct *p) -+{ -+ s64 account_ns = rq->niffies - p->last_ran; -+ struct task_struct *idle = rq->idle; -+ -+ /* Accurate tick timekeeping */ -+ if (user_mode(get_irq_regs())) -+ pc_user_time(rq, p, account_ns); -+ else if (p != idle || (irq_count() != HARDIRQ_OFFSET)) { -+ pc_system_time(rq, p, HARDIRQ_OFFSET, account_ns); -+ } else -+ pc_idle_time(rq, idle, account_ns); -+ -+ /* time_slice accounting is done in usecs to avoid overflow on 32bit */ -+ if (p->policy != SCHED_FIFO && p != idle) -+ p->time_slice -= NS_TO_US(account_ns); -+ -+ p->last_ran = rq->niffies; -+} -+ -+/* -+ * This is called on context switches. -+ * Bank in p->sched_time the ns elapsed since the last tick or switch. -+ * CPU scheduler quota accounting is also performed here in microseconds. -+ */ -+static void update_cpu_clock_switch(struct rq *rq, struct task_struct *p) -+{ -+ s64 account_ns = rq->niffies - p->last_ran; -+ struct task_struct *idle = rq->idle; -+ -+ /* Accurate subtick timekeeping */ -+ if (p != idle) -+ pc_user_time(rq, p, account_ns); -+ else -+ pc_idle_time(rq, idle, account_ns); -+ -+ /* time_slice accounting is done in usecs to avoid overflow on 32bit */ -+ if (p->policy != SCHED_FIFO && p != idle) -+ p->time_slice -= NS_TO_US(account_ns); -+} -+ -+/* -+ * Return any ns on the sched_clock that have not yet been accounted in -+ * @p in case that task is currently running. -+ * -+ * Called with task_rq_lock(p) held. -+ */ -+static inline u64 do_task_delta_exec(struct task_struct *p, struct rq *rq) -+{ -+ u64 ns = 0; -+ -+ /* -+ * Must be ->curr _and_ ->on_rq. If dequeued, we would -+ * project cycles that may never be accounted to this -+ * thread, breaking clock_gettime(). -+ */ -+ if (p == rq->curr && task_on_rq_queued(p)) { -+ update_clocks(rq); -+ ns = rq->niffies - p->last_ran; -+ } -+ -+ return ns; -+} -+ -+/* -+ * Return accounted runtime for the task. -+ * Return separately the current's pending runtime that have not been -+ * accounted yet. -+ * -+ */ -+unsigned long long task_sched_runtime(struct task_struct *p) -+{ -+ unsigned long flags; -+ struct rq *rq; -+ u64 ns; -+ -+#if defined(CONFIG_64BIT) && defined(CONFIG_SMP) -+ /* -+ * 64-bit doesn't need locks to atomically read a 64bit value. -+ * So we have a optimization chance when the task's delta_exec is 0. -+ * Reading ->on_cpu is racy, but this is ok. -+ * -+ * If we race with it leaving CPU, we'll take a lock. So we're correct. -+ * If we race with it entering CPU, unaccounted time is 0. This is -+ * indistinguishable from the read occurring a few cycles earlier. -+ * If we see ->on_cpu without ->on_rq, the task is leaving, and has -+ * been accounted, so we're correct here as well. -+ */ -+ if (!p->on_cpu || !task_on_rq_queued(p)) -+ return tsk_seruntime(p); -+#endif -+ -+ rq = task_rq_lock(p, &flags); -+ ns = p->sched_time + do_task_delta_exec(p, rq); -+ task_rq_unlock(rq, p, &flags); -+ -+ return ns; -+} -+ -+/* -+ * Functions to test for when SCHED_ISO tasks have used their allocated -+ * quota as real time scheduling and convert them back to SCHED_NORMAL. All -+ * data is modified only by the local runqueue during scheduler_tick with -+ * interrupts disabled. -+ */ -+ -+/* -+ * Test if SCHED_ISO tasks have run longer than their alloted period as RT -+ * tasks and set the refractory flag if necessary. There is 10% hysteresis -+ * for unsetting the flag. 115/128 is ~90/100 as a fast shift instead of a -+ * slow division. -+ */ -+static inline void iso_tick(struct rq *rq) -+{ -+ rq->iso_ticks = rq->iso_ticks * (ISO_PERIOD - 1) / ISO_PERIOD; -+ rq->iso_ticks += 100; -+ if (rq->iso_ticks > ISO_PERIOD * sched_iso_cpu) { -+ rq->iso_refractory = true; -+ if (unlikely(rq->iso_ticks > ISO_PERIOD * 100)) -+ rq->iso_ticks = ISO_PERIOD * 100; -+ } -+} -+ -+/* No SCHED_ISO task was running so decrease rq->iso_ticks */ -+static inline void no_iso_tick(struct rq *rq, int ticks) -+{ -+ if (rq->iso_ticks > 0 || rq->iso_refractory) { -+ rq->iso_ticks = rq->iso_ticks * (ISO_PERIOD - ticks) / ISO_PERIOD; -+ if (rq->iso_ticks < ISO_PERIOD * (sched_iso_cpu * 115 / 128)) { -+ rq->iso_refractory = false; -+ if (unlikely(rq->iso_ticks < 0)) -+ rq->iso_ticks = 0; -+ } -+ } -+} -+ -+/* This manages tasks that have run out of timeslice during a scheduler_tick */ -+static void task_running_tick(struct rq *rq) -+{ -+ struct task_struct *p = rq->curr; -+ -+ /* -+ * If a SCHED_ISO task is running we increment the iso_ticks. In -+ * order to prevent SCHED_ISO tasks from causing starvation in the -+ * presence of true RT tasks we account those as iso_ticks as well. -+ */ -+ if (rt_task(p) || task_running_iso(p)) -+ iso_tick(rq); -+ else -+ no_iso_tick(rq, 1); -+ -+ /* SCHED_FIFO tasks never run out of timeslice. */ -+ if (p->policy == SCHED_FIFO) -+ return; -+ -+ if (iso_task(p)) { -+ if (task_running_iso(p)) { -+ if (rq->iso_refractory) { -+ /* -+ * SCHED_ISO task is running as RT and limit -+ * has been hit. Force it to reschedule as -+ * SCHED_NORMAL by zeroing its time_slice -+ */ -+ p->time_slice = 0; -+ } -+ } else if (!rq->iso_refractory) { -+ /* Can now run again ISO. Reschedule to pick up prio */ -+ goto out_resched; -+ } -+ } -+ -+ /* -+ * Tasks that were scheduled in the first half of a tick are not -+ * allowed to run into the 2nd half of the next tick if they will -+ * run out of time slice in the interim. Otherwise, if they have -+ * less than RESCHED_US μs of time slice left they will be rescheduled. -+ * Dither is used as a backup for when hrexpiry is disabled or high res -+ * timers not configured in. -+ */ -+ if (p->time_slice - rq->dither >= RESCHED_US) -+ return; -+out_resched: -+ rq_lock(rq); -+ __set_tsk_resched(p); -+ rq_unlock(rq); -+} -+ -+#ifdef CONFIG_NO_HZ_FULL -+/* -+ * We can stop the timer tick any time highres timers are active since -+ * we rely entirely on highres timeouts for task expiry rescheduling. -+ */ -+static void sched_stop_tick(struct rq *rq, int cpu) -+{ -+ if (!hrexpiry_enabled(rq)) -+ return; -+ if (!tick_nohz_full_enabled()) -+ return; -+ if (!tick_nohz_full_cpu(cpu)) -+ return; -+ tick_nohz_dep_clear_cpu(cpu, TICK_DEP_BIT_SCHED); -+} -+ -+static inline void sched_start_tick(struct rq *rq, int cpu) -+{ -+ tick_nohz_dep_set_cpu(cpu, TICK_DEP_BIT_SCHED); -+} -+ -+/** -+ * scheduler_tick_max_deferment -+ * -+ * Keep at least one tick per second when a single -+ * active task is running. -+ * -+ * This makes sure that uptime continues to move forward, even -+ * with a very low granularity. -+ * -+ * Return: Maximum deferment in nanoseconds. -+ */ -+u64 scheduler_tick_max_deferment(void) -+{ -+ struct rq *rq = this_rq(); -+ unsigned long next, now = READ_ONCE(jiffies); -+ -+ next = rq->last_jiffy + HZ; -+ -+ if (time_before_eq(next, now)) -+ return 0; -+ -+ return jiffies_to_nsecs(next - now); -+} -+#else -+static inline void sched_stop_tick(struct rq *rq, int cpu) -+{ -+} -+ -+static inline void sched_start_tick(struct rq *rq, int cpu) -+{ -+} -+#endif -+ -+/* -+ * This function gets called by the timer code, with HZ frequency. -+ * We call it with interrupts disabled. -+ */ -+void scheduler_tick(void) -+{ -+ int cpu __maybe_unused = smp_processor_id(); -+ struct rq *rq = cpu_rq(cpu); -+ -+ sched_clock_tick(); -+ update_clocks(rq); -+ update_load_avg(rq, 0); -+ update_cpu_clock_tick(rq, rq->curr); -+ if (!rq_idle(rq)) -+ task_running_tick(rq); -+ else if (rq->last_jiffy > rq->last_scheduler_tick) -+ no_iso_tick(rq, rq->last_jiffy - rq->last_scheduler_tick); -+ rq->last_scheduler_tick = rq->last_jiffy; -+ rq->last_tick = rq->clock; -+ perf_event_task_tick(); -+ sched_stop_tick(rq, cpu); -+} -+ -+#if defined(CONFIG_PREEMPT) && (defined(CONFIG_DEBUG_PREEMPT) || \ -+ defined(CONFIG_PREEMPT_TRACER)) -+/* -+ * If the value passed in is equal to the current preempt count -+ * then we just disabled preemption. Start timing the latency. -+ */ -+static inline void preempt_latency_start(int val) -+{ -+ if (preempt_count() == val) { -+ unsigned long ip = get_lock_parent_ip(); -+#ifdef CONFIG_DEBUG_PREEMPT -+ current->preempt_disable_ip = ip; -+#endif -+ trace_preempt_off(CALLER_ADDR0, ip); -+ } -+} -+ -+void preempt_count_add(int val) -+{ -+#ifdef CONFIG_DEBUG_PREEMPT -+ /* -+ * Underflow? -+ */ -+ if (DEBUG_LOCKS_WARN_ON((preempt_count() < 0))) -+ return; -+#endif -+ __preempt_count_add(val); -+#ifdef CONFIG_DEBUG_PREEMPT -+ /* -+ * Spinlock count overflowing soon? -+ */ -+ DEBUG_LOCKS_WARN_ON((preempt_count() & PREEMPT_MASK) >= -+ PREEMPT_MASK - 10); -+#endif -+ preempt_latency_start(val); -+} -+EXPORT_SYMBOL(preempt_count_add); -+NOKPROBE_SYMBOL(preempt_count_add); -+ -+/* -+ * If the value passed in equals to the current preempt count -+ * then we just enabled preemption. Stop timing the latency. -+ */ -+static inline void preempt_latency_stop(int val) -+{ -+ if (preempt_count() == val) -+ trace_preempt_on(CALLER_ADDR0, get_lock_parent_ip()); -+} -+ -+void preempt_count_sub(int val) -+{ -+#ifdef CONFIG_DEBUG_PREEMPT -+ /* -+ * Underflow? -+ */ -+ if (DEBUG_LOCKS_WARN_ON(val > preempt_count())) -+ return; -+ /* -+ * Is the spinlock portion underflowing? -+ */ -+ if (DEBUG_LOCKS_WARN_ON((val < PREEMPT_MASK) && -+ !(preempt_count() & PREEMPT_MASK))) -+ return; -+#endif -+ -+ preempt_latency_stop(val); -+ __preempt_count_sub(val); -+} -+EXPORT_SYMBOL(preempt_count_sub); -+NOKPROBE_SYMBOL(preempt_count_sub); -+ -+#else -+static inline void preempt_latency_start(int val) { } -+static inline void preempt_latency_stop(int val) { } -+#endif -+ -+static inline unsigned long get_preempt_disable_ip(struct task_struct *p) -+{ -+#ifdef CONFIG_DEBUG_PREEMPT -+ return p->preempt_disable_ip; -+#else -+ return 0; -+#endif -+} -+ -+/* -+ * The time_slice is only refilled when it is empty and that is when we set a -+ * new deadline. Make sure update_clocks has been called recently to update -+ * rq->niffies. -+ */ -+static void time_slice_expired(struct task_struct *p, struct rq *rq) -+{ -+ p->time_slice = timeslice(); -+ p->deadline = rq->niffies + task_deadline_diff(p); -+#ifdef CONFIG_SMT_NICE -+ if (!p->mm) -+ p->smt_bias = 0; -+ else if (rt_task(p)) -+ p->smt_bias = 1 << 30; -+ else if (task_running_iso(p)) -+ p->smt_bias = 1 << 29; -+ else if (idleprio_task(p)) { -+ if (task_running_idle(p)) -+ p->smt_bias = 0; -+ else -+ p->smt_bias = 1; -+ } else if (--p->smt_bias < 1) -+ p->smt_bias = MAX_PRIO - p->static_prio; -+#endif -+} -+ -+/* -+ * Timeslices below RESCHED_US are considered as good as expired as there's no -+ * point rescheduling when there's so little time left. SCHED_BATCH tasks -+ * have been flagged be not latency sensitive and likely to be fully CPU -+ * bound so every time they're rescheduled they have their time_slice -+ * refilled, but get a new later deadline to have little effect on -+ * SCHED_NORMAL tasks. -+ -+ */ -+static inline void check_deadline(struct task_struct *p, struct rq *rq) -+{ -+ if (p->time_slice < RESCHED_US || batch_task(p)) -+ time_slice_expired(p, rq); -+} -+ -+/* -+ * Task selection with skiplists is a simple matter of picking off the first -+ * task in the sorted list, an O(1) operation. The lookup is amortised O(1) -+ * being bound to the number of processors. -+ * -+ * Runqueues are selectively locked based on their unlocked data and then -+ * unlocked if not needed. At most 3 locks will be held at any time and are -+ * released as soon as they're no longer needed. All balancing between CPUs -+ * is thus done here in an extremely simple first come best fit manner. -+ * -+ * This iterates over runqueues in cache locality order. In interactive mode -+ * it iterates over all CPUs and finds the task with the best key/deadline. -+ * In non-interactive mode it will only take a task if it's from the current -+ * runqueue or a runqueue with more tasks than the current one with a better -+ * key/deadline. -+ */ -+#ifdef CONFIG_SMP -+static inline struct task_struct -+*earliest_deadline_task(struct rq *rq, int cpu, struct task_struct *idle) -+{ -+ struct rq *locked = NULL, *chosen = NULL; -+ struct task_struct *edt = idle; -+ int i, best_entries = 0; -+ u64 best_key = ~0ULL; -+ -+ for (i = 0; i < num_possible_cpus(); i++) { -+ struct rq *other_rq = rq_order(rq, i); -+ int entries = other_rq->sl->entries; -+ skiplist_node *next; -+ -+ /* -+ * Check for queued entres lockless first. The local runqueue -+ * is locked so entries will always be accurate. -+ */ -+ if (!sched_interactive) { -+ /* -+ * Don't reschedule balance across nodes unless the CPU -+ * is idle. -+ */ -+ if (edt != idle && rq->cpu_locality[other_rq->cpu] > 3) -+ break; -+ if (entries <= best_entries) -+ continue; -+ } else if (!entries) -+ continue; -+ -+ /* if (i) implies other_rq != rq */ -+ if (i) { -+ /* Check for best id queued lockless first */ -+ if (other_rq->best_key >= best_key) -+ continue; -+ -+ if (unlikely(!trylock_rq(rq, other_rq))) -+ continue; -+ -+ /* Need to reevaluate entries after locking */ -+ entries = other_rq->sl->entries; -+ if (unlikely(!entries)) { -+ unlock_rq(other_rq); -+ continue; -+ } -+ } -+ -+ next = &other_rq->node; -+ /* -+ * In interactive mode we check beyond the best entry on other -+ * runqueues if we can't get the best for smt or affinity -+ * reasons. -+ */ -+ while ((next = next->next[0]) != &other_rq->node) { -+ struct task_struct *p; -+ u64 key = next->key; -+ -+ /* Reevaluate key after locking */ -+ if (key >= best_key) -+ break; -+ -+ p = next->value; -+ if (!smt_schedule(p, rq)) { -+ if (i && !sched_interactive) -+ break; -+ continue; -+ } -+ -+ /* Make sure affinity is ok */ -+ if (i) { -+ if (needs_other_cpu(p, cpu)) { -+ if (sched_interactive) -+ continue; -+ break; -+ } -+ /* From this point on p is the best so far */ -+ if (locked) -+ unlock_rq(locked); -+ chosen = locked = other_rq; -+ } -+ best_entries = entries; -+ best_key = key; -+ edt = p; -+ break; -+ } -+ /* rq->preempting is a hint only as the state may have changed -+ * since it was set with the resched call but if we have met -+ * the condition we can break out here. */ -+ if (edt == rq->preempting) -+ break; -+ if (i && other_rq != chosen) -+ unlock_rq(other_rq); -+ } -+ -+ if (likely(edt != idle)) -+ take_task(rq, cpu, edt); -+ -+ if (locked) -+ unlock_rq(locked); -+ -+ rq->preempting = NULL; -+ -+ return edt; -+} -+#else /* CONFIG_SMP */ -+static inline struct task_struct -+*earliest_deadline_task(struct rq *rq, int cpu, struct task_struct *idle) -+{ -+ struct task_struct *edt; -+ -+ if (unlikely(!rq->sl->entries)) -+ return idle; -+ edt = rq->node.next[0]->value; -+ take_task(rq, cpu, edt); -+ return edt; -+} -+#endif /* CONFIG_SMP */ -+ -+/* -+ * Print scheduling while atomic bug: -+ */ -+static noinline void __schedule_bug(struct task_struct *prev) -+{ -+ /* Save this before calling printk(), since that will clobber it */ -+ unsigned long preempt_disable_ip = get_preempt_disable_ip(current); -+ -+ if (oops_in_progress) -+ return; -+ -+ printk(KERN_ERR "BUG: scheduling while atomic: %s/%d/0x%08x\n", -+ prev->comm, prev->pid, preempt_count()); -+ -+ debug_show_held_locks(prev); -+ print_modules(); -+ if (irqs_disabled()) -+ print_irqtrace_events(prev); -+ if (IS_ENABLED(CONFIG_DEBUG_PREEMPT) -+ && in_atomic_preempt_off()) { -+ pr_err("Preemption disabled at:"); -+ print_ip_sym(preempt_disable_ip); -+ pr_cont("\n"); -+ } -+ dump_stack(); -+ add_taint(TAINT_WARN, LOCKDEP_STILL_OK); -+} -+ -+/* -+ * Various schedule()-time debugging checks and statistics: -+ */ -+static inline void schedule_debug(struct task_struct *prev) -+{ -+#ifdef CONFIG_SCHED_STACK_END_CHECK -+ if (task_stack_end_corrupted(prev)) -+ panic("corrupted stack end detected inside scheduler\n"); -+#endif -+ -+ if (unlikely(in_atomic_preempt_off())) { -+ __schedule_bug(prev); -+ preempt_count_set(PREEMPT_DISABLED); -+ } -+ rcu_sleep_check(); -+ -+ profile_hit(SCHED_PROFILING, __builtin_return_address(0)); -+ -+ schedstat_inc(this_rq()->sched_count); -+} -+ -+/* -+ * The currently running task's information is all stored in rq local data -+ * which is only modified by the local CPU. -+ */ -+static inline void set_rq_task(struct rq *rq, struct task_struct *p) -+{ -+ if (p == rq->idle || p->policy == SCHED_FIFO) -+ hrexpiry_clear(rq); -+ else -+ hrexpiry_start(rq, US_TO_NS(p->time_slice)); -+ if (rq->clock - rq->last_tick > HALF_JIFFY_NS) -+ rq->dither = 0; -+ else -+ rq->dither = rq_dither(rq); -+ -+ rq->rq_deadline = p->deadline; -+ rq->rq_prio = p->prio; -+#ifdef CONFIG_SMT_NICE -+ rq->rq_mm = p->mm; -+ rq->rq_smt_bias = p->smt_bias; -+#endif -+} -+ -+#ifdef CONFIG_SMT_NICE -+static void check_no_siblings(struct rq __maybe_unused *this_rq) {} -+static void wake_no_siblings(struct rq __maybe_unused *this_rq) {} -+static void (*check_siblings)(struct rq *this_rq) = &check_no_siblings; -+static void (*wake_siblings)(struct rq *this_rq) = &wake_no_siblings; -+ -+/* Iterate over smt siblings when we've scheduled a process on cpu and decide -+ * whether they should continue running or be descheduled. */ -+static void check_smt_siblings(struct rq *this_rq) -+{ -+ int other_cpu; -+ -+ for_each_cpu(other_cpu, &this_rq->thread_mask) { -+ struct task_struct *p; -+ struct rq *rq; -+ -+ rq = cpu_rq(other_cpu); -+ if (rq_idle(rq)) -+ continue; -+ p = rq->curr; -+ if (!smt_schedule(p, this_rq)) -+ resched_curr(rq); -+ } -+} -+ -+static void wake_smt_siblings(struct rq *this_rq) -+{ -+ int other_cpu; -+ -+ for_each_cpu(other_cpu, &this_rq->thread_mask) { -+ struct rq *rq; -+ -+ rq = cpu_rq(other_cpu); -+ if (rq_idle(rq)) -+ resched_idle(rq); -+ } -+} -+#else -+static void check_siblings(struct rq __maybe_unused *this_rq) {} -+static void wake_siblings(struct rq __maybe_unused *this_rq) {} -+#endif -+ -+/* -+ * schedule() is the main scheduler function. -+ * -+ * The main means of driving the scheduler and thus entering this function are: -+ * -+ * 1. Explicit blocking: mutex, semaphore, waitqueue, etc. -+ * -+ * 2. TIF_NEED_RESCHED flag is checked on interrupt and userspace return -+ * paths. For example, see arch/x86/entry_64.S. -+ * -+ * To drive preemption between tasks, the scheduler sets the flag in timer -+ * interrupt handler scheduler_tick(). -+ * -+ * 3. Wakeups don't really cause entry into schedule(). They add a -+ * task to the run-queue and that's it. -+ * -+ * Now, if the new task added to the run-queue preempts the current -+ * task, then the wakeup sets TIF_NEED_RESCHED and schedule() gets -+ * called on the nearest possible occasion: -+ * -+ * - If the kernel is preemptible (CONFIG_PREEMPT=y): -+ * -+ * - in syscall or exception context, at the next outmost -+ * preempt_enable(). (this might be as soon as the wake_up()'s -+ * spin_unlock()!) -+ * -+ * - in IRQ context, return from interrupt-handler to -+ * preemptible context -+ * -+ * - If the kernel is not preemptible (CONFIG_PREEMPT is not set) -+ * then at the next: -+ * -+ * - cond_resched() call -+ * - explicit schedule() call -+ * - return from syscall or exception to user-space -+ * - return from interrupt-handler to user-space -+ * -+ * WARNING: must be called with preemption disabled! -+ */ -+static void __sched notrace __schedule(bool preempt) -+{ -+ struct task_struct *prev, *next, *idle; -+ unsigned long *switch_count; -+ bool deactivate = false; -+ struct rq *rq; -+ u64 niffies; -+ int cpu; -+ -+ cpu = smp_processor_id(); -+ rq = cpu_rq(cpu); -+ prev = rq->curr; -+ idle = rq->idle; -+ -+ schedule_debug(prev); -+ -+ local_irq_disable(); -+ rcu_note_context_switch(preempt); -+ -+ /* -+ * Make sure that signal_pending_state()->signal_pending() below -+ * can't be reordered with __set_current_state(TASK_INTERRUPTIBLE) -+ * done by the caller to avoid the race with signal_wake_up(). -+ */ -+ rq_lock(rq); -+ smp_mb__after_spinlock(); -+#ifdef CONFIG_SMP -+ if (rq->preempt) { -+ /* -+ * Make sure resched_curr hasn't triggered a preemption -+ * locklessly on a task that has since scheduled away. Spurious -+ * wakeup of idle is okay though. -+ */ -+ if (unlikely(preempt && prev != idle && !test_tsk_need_resched(prev))) { -+ rq->preempt = NULL; -+ clear_preempt_need_resched(); -+ rq_unlock_irq(rq); -+ return; -+ } -+ rq->preempt = NULL; -+ } -+#endif -+ -+ switch_count = &prev->nivcsw; -+ if (!preempt && prev->state) { -+ if (unlikely(signal_pending_state(prev->state, prev))) { -+ prev->state = TASK_RUNNING; -+ } else { -+ deactivate = true; -+ prev->on_rq = 0; -+ -+ if (prev->in_iowait) { -+ atomic_inc(&rq->nr_iowait); -+ delayacct_blkio_start(); -+ } -+ -+ /* -+ * If a worker is going to sleep, notify and -+ * ask workqueue whether it wants to wake up a -+ * task to maintain concurrency. If so, wake -+ * up the task. -+ */ -+ if (prev->flags & PF_WQ_WORKER) { -+ struct task_struct *to_wakeup; -+ -+ to_wakeup = wq_worker_sleeping(prev); -+ if (to_wakeup) -+ try_to_wake_up_local(to_wakeup); -+ } -+ } -+ switch_count = &prev->nvcsw; -+ } -+ -+ /* -+ * Store the niffy value here for use by the next task's last_ran -+ * below to avoid losing niffies due to update_clocks being called -+ * again after this point. -+ */ -+ update_clocks(rq); -+ niffies = rq->niffies; -+ update_cpu_clock_switch(rq, prev); -+ -+ clear_tsk_need_resched(prev); -+ clear_preempt_need_resched(); -+ -+ if (idle != prev) { -+ check_deadline(prev, rq); -+ return_task(prev, rq, cpu, deactivate); -+ } -+ -+ next = earliest_deadline_task(rq, cpu, idle); -+ if (likely(next->prio != PRIO_LIMIT)) -+ clear_cpuidle_map(cpu); -+ else { -+ set_cpuidle_map(cpu); -+ update_load_avg(rq, 0); -+ } -+ -+ set_rq_task(rq, next); -+ next->last_ran = niffies; -+ -+ if (likely(prev != next)) { -+ /* -+ * Don't reschedule an idle task or deactivated tasks -+ */ -+ if (prev != idle && !deactivate) -+ resched_suitable_idle(prev); -+ if (next != idle) -+ check_siblings(rq); -+ else -+ wake_siblings(rq); -+ rq->nr_switches++; -+ rq->curr = next; -+ /* -+ * The membarrier system call requires each architecture -+ * to have a full memory barrier after updating -+ * rq->curr, before returning to user-space. For TSO -+ * (e.g. x86), the architecture must provide its own -+ * barrier in switch_mm(). For weakly ordered machines -+ * for which spin_unlock() acts as a full memory -+ * barrier, finish_lock_switch() in common code takes -+ * care of this barrier. For weakly ordered machines for -+ * which spin_unlock() acts as a RELEASE barrier (only -+ * arm64 and PowerPC), arm64 has a full barrier in -+ * switch_to(), and PowerPC has -+ * smp_mb__after_unlock_lock() before -+ * finish_lock_switch(). -+ */ -+ ++*switch_count; -+ -+ trace_sched_switch(preempt, prev, next); -+ context_switch(rq, prev, next); /* unlocks the rq */ -+ } else { -+ check_siblings(rq); -+ rq_unlock(rq); -+ do_pending_softirq(rq, next); -+ local_irq_enable(); -+ } -+} -+ -+void __noreturn do_task_dead(void) -+{ -+ /* -+ * The setting of TASK_RUNNING by try_to_wake_up() may be delayed -+ * when the following two conditions become true. -+ * - There is race condition of mmap_sem (It is acquired by -+ * exit_mm()), and -+ * - SMI occurs before setting TASK_RUNINNG. -+ * (or hypervisor of virtual machine switches to other guest) -+ * As a result, we may become TASK_RUNNING after becoming TASK_DEAD -+ * -+ * To avoid it, we have to wait for releasing tsk->pi_lock which -+ * is held by try_to_wake_up() -+ */ -+ raw_spin_lock_irq(¤t->pi_lock); -+ raw_spin_unlock_irq(¤t->pi_lock); -+ -+ /* Causes final put_task_struct in finish_task_switch(). */ -+ __set_current_state(TASK_DEAD); -+ -+ /* Tell freezer to ignore us: */ -+ current->flags |= PF_NOFREEZE; -+ __schedule(false); -+ BUG(); -+ -+ /* Avoid "noreturn function does return" - but don't continue if BUG() is a NOP: */ -+ for (;;) -+ cpu_relax(); -+} -+ -+static inline void sched_submit_work(struct task_struct *tsk) -+{ -+ if (!tsk->state || tsk_is_pi_blocked(tsk) || -+ preempt_count() || -+ signal_pending_state(tsk->state, tsk)) -+ return; -+ -+ /* -+ * If we are going to sleep and we have plugged IO queued, -+ * make sure to submit it to avoid deadlocks. -+ */ -+ if (blk_needs_flush_plug(tsk)) -+ blk_schedule_flush_plug(tsk); -+} -+ -+asmlinkage __visible void __sched schedule(void) -+{ -+ struct task_struct *tsk = current; -+ -+ sched_submit_work(tsk); -+ do { -+ preempt_disable(); -+ __schedule(false); -+ sched_preempt_enable_no_resched(); -+ } while (need_resched()); -+} -+ -+EXPORT_SYMBOL(schedule); -+ -+/* -+ * synchronize_rcu_tasks() makes sure that no task is stuck in preempted -+ * state (have scheduled out non-voluntarily) by making sure that all -+ * tasks have either left the run queue or have gone into user space. -+ * As idle tasks do not do either, they must not ever be preempted -+ * (schedule out non-voluntarily). -+ * -+ * schedule_idle() is similar to schedule_preempt_disable() except that it -+ * never enables preemption because it does not call sched_submit_work(). -+ */ -+void __sched schedule_idle(void) -+{ -+ /* -+ * As this skips calling sched_submit_work(), which the idle task does -+ * regardless because that function is a nop when the task is in a -+ * TASK_RUNNING state, make sure this isn't used someplace that the -+ * current task can be in any other state. Note, idle is always in the -+ * TASK_RUNNING state. -+ */ -+ WARN_ON_ONCE(current->state); -+ do { -+ __schedule(false); -+ } while (need_resched()); -+} -+ -+#ifdef CONFIG_CONTEXT_TRACKING -+asmlinkage __visible void __sched schedule_user(void) -+{ -+ /* -+ * If we come here after a random call to set_need_resched(), -+ * or we have been woken up remotely but the IPI has not yet arrived, -+ * we haven't yet exited the RCU idle mode. Do it here manually until -+ * we find a better solution. -+ * -+ * NB: There are buggy callers of this function. Ideally we -+ * should warn if prev_state != IN_USER, but that will trigger -+ * too frequently to make sense yet. -+ */ -+ enum ctx_state prev_state = exception_enter(); -+ schedule(); -+ exception_exit(prev_state); -+} -+#endif -+ -+/** -+ * schedule_preempt_disabled - called with preemption disabled -+ * -+ * Returns with preemption disabled. Note: preempt_count must be 1 -+ */ -+void __sched schedule_preempt_disabled(void) -+{ -+ sched_preempt_enable_no_resched(); -+ schedule(); -+ preempt_disable(); -+} -+ -+static void __sched notrace preempt_schedule_common(void) -+{ -+ do { -+ /* -+ * Because the function tracer can trace preempt_count_sub() -+ * and it also uses preempt_enable/disable_notrace(), if -+ * NEED_RESCHED is set, the preempt_enable_notrace() called -+ * by the function tracer will call this function again and -+ * cause infinite recursion. -+ * -+ * Preemption must be disabled here before the function -+ * tracer can trace. Break up preempt_disable() into two -+ * calls. One to disable preemption without fear of being -+ * traced. The other to still record the preemption latency, -+ * which can also be traced by the function tracer. -+ */ -+ preempt_disable_notrace(); -+ preempt_latency_start(1); -+ __schedule(true); -+ preempt_latency_stop(1); -+ preempt_enable_no_resched_notrace(); -+ -+ /* -+ * Check again in case we missed a preemption opportunity -+ * between schedule and now. -+ */ -+ } while (need_resched()); -+} -+ -+#ifdef CONFIG_PREEMPT -+/* -+ * this is the entry point to schedule() from in-kernel preemption -+ * off of preempt_enable. Kernel preemptions off return from interrupt -+ * occur there and call schedule directly. -+ */ -+asmlinkage __visible void __sched notrace preempt_schedule(void) -+{ -+ /* -+ * If there is a non-zero preempt_count or interrupts are disabled, -+ * we do not want to preempt the current task. Just return.. -+ */ -+ if (likely(!preemptible())) -+ return; -+ -+ preempt_schedule_common(); -+} -+NOKPROBE_SYMBOL(preempt_schedule); -+EXPORT_SYMBOL(preempt_schedule); -+ -+/** -+ * preempt_schedule_notrace - preempt_schedule called by tracing -+ * -+ * The tracing infrastructure uses preempt_enable_notrace to prevent -+ * recursion and tracing preempt enabling caused by the tracing -+ * infrastructure itself. But as tracing can happen in areas coming -+ * from userspace or just about to enter userspace, a preempt enable -+ * can occur before user_exit() is called. This will cause the scheduler -+ * to be called when the system is still in usermode. -+ * -+ * To prevent this, the preempt_enable_notrace will use this function -+ * instead of preempt_schedule() to exit user context if needed before -+ * calling the scheduler. -+ */ -+asmlinkage __visible void __sched notrace preempt_schedule_notrace(void) -+{ -+ enum ctx_state prev_ctx; -+ -+ if (likely(!preemptible())) -+ return; -+ -+ do { -+ /* -+ * Because the function tracer can trace preempt_count_sub() -+ * and it also uses preempt_enable/disable_notrace(), if -+ * NEED_RESCHED is set, the preempt_enable_notrace() called -+ * by the function tracer will call this function again and -+ * cause infinite recursion. -+ * -+ * Preemption must be disabled here before the function -+ * tracer can trace. Break up preempt_disable() into two -+ * calls. One to disable preemption without fear of being -+ * traced. The other to still record the preemption latency, -+ * which can also be traced by the function tracer. -+ */ -+ preempt_disable_notrace(); -+ preempt_latency_start(1); -+ /* -+ * Needs preempt disabled in case user_exit() is traced -+ * and the tracer calls preempt_enable_notrace() causing -+ * an infinite recursion. -+ */ -+ prev_ctx = exception_enter(); -+ __schedule(true); -+ exception_exit(prev_ctx); -+ -+ preempt_latency_stop(1); -+ preempt_enable_no_resched_notrace(); -+ } while (need_resched()); -+} -+EXPORT_SYMBOL_GPL(preempt_schedule_notrace); -+ -+#endif /* CONFIG_PREEMPT */ -+ -+/* -+ * this is the entry point to schedule() from kernel preemption -+ * off of irq context. -+ * Note, that this is called and return with irqs disabled. This will -+ * protect us against recursive calling from irq. -+ */ -+asmlinkage __visible void __sched preempt_schedule_irq(void) -+{ -+ enum ctx_state prev_state; -+ -+ /* Catch callers which need to be fixed */ -+ BUG_ON(preempt_count() || !irqs_disabled()); -+ -+ prev_state = exception_enter(); -+ -+ do { -+ preempt_disable(); -+ local_irq_enable(); -+ __schedule(true); -+ local_irq_disable(); -+ sched_preempt_enable_no_resched(); -+ } while (need_resched()); -+ -+ exception_exit(prev_state); -+} -+ -+int default_wake_function(wait_queue_entry_t *curr, unsigned mode, int wake_flags, -+ void *key) -+{ -+ return try_to_wake_up(curr->private, mode, wake_flags); -+} -+EXPORT_SYMBOL(default_wake_function); -+ -+#ifdef CONFIG_RT_MUTEXES -+ -+static inline int __rt_effective_prio(struct task_struct *pi_task, int prio) -+{ -+ if (pi_task) -+ prio = min(prio, pi_task->prio); -+ -+ return prio; -+} -+ -+static inline int rt_effective_prio(struct task_struct *p, int prio) -+{ -+ struct task_struct *pi_task = rt_mutex_get_top_task(p); -+ -+ return __rt_effective_prio(pi_task, prio); -+} -+ -+/* -+ * rt_mutex_setprio - set the current priority of a task -+ * @p: task to boost -+ * @pi_task: donor task -+ * -+ * This function changes the 'effective' priority of a task. It does -+ * not touch ->normal_prio like __setscheduler(). -+ * -+ * Used by the rt_mutex code to implement priority inheritance -+ * logic. Call site only calls if the priority of the task changed. -+ */ -+void rt_mutex_setprio(struct task_struct *p, struct task_struct *pi_task) -+{ -+ int prio, oldprio; -+ struct rq *rq; -+ -+ /* XXX used to be waiter->prio, not waiter->task->prio */ -+ prio = __rt_effective_prio(pi_task, p->normal_prio); -+ -+ /* -+ * If nothing changed; bail early. -+ */ -+ if (p->pi_top_task == pi_task && prio == p->prio) -+ return; -+ -+ rq = __task_rq_lock(p); -+ update_rq_clock(rq); -+ /* -+ * Set under pi_lock && rq->lock, such that the value can be used under -+ * either lock. -+ * -+ * Note that there is loads of tricky to make this pointer cache work -+ * right. rt_mutex_slowunlock()+rt_mutex_postunlock() work together to -+ * ensure a task is de-boosted (pi_task is set to NULL) before the -+ * task is allowed to run again (and can exit). This ensures the pointer -+ * points to a blocked task -- which guaratees the task is present. -+ */ -+ p->pi_top_task = pi_task; -+ -+ /* -+ * For FIFO/RR we only need to set prio, if that matches we're done. -+ */ -+ if (prio == p->prio) -+ goto out_unlock; -+ -+ /* -+ * Idle task boosting is a nono in general. There is one -+ * exception, when PREEMPT_RT and NOHZ is active: -+ * -+ * The idle task calls get_next_timer_interrupt() and holds -+ * the timer wheel base->lock on the CPU and another CPU wants -+ * to access the timer (probably to cancel it). We can safely -+ * ignore the boosting request, as the idle CPU runs this code -+ * with interrupts disabled and will complete the lock -+ * protected section without being interrupted. So there is no -+ * real need to boost. -+ */ -+ if (unlikely(p == rq->idle)) { -+ WARN_ON(p != rq->curr); -+ WARN_ON(p->pi_blocked_on); -+ goto out_unlock; -+ } -+ -+ trace_sched_pi_setprio(p, pi_task); -+ oldprio = p->prio; -+ p->prio = prio; -+ if (task_running(rq, p)){ -+ if (prio > oldprio) -+ resched_task(p); -+ } else if (task_queued(p)) { -+ dequeue_task(rq, p, DEQUEUE_SAVE); -+ enqueue_task(rq, p, ENQUEUE_RESTORE); -+ if (prio < oldprio) -+ try_preempt(p, rq); -+ } -+out_unlock: -+ __task_rq_unlock(rq); -+} -+#else -+static inline int rt_effective_prio(struct task_struct *p, int prio) -+{ -+ return prio; -+} -+#endif -+ -+/* -+ * Adjust the deadline for when the priority is to change, before it's -+ * changed. -+ */ -+static inline void adjust_deadline(struct task_struct *p, int new_prio) -+{ -+ p->deadline += static_deadline_diff(new_prio) - task_deadline_diff(p); -+} -+ -+void set_user_nice(struct task_struct *p, long nice) -+{ -+ int new_static, old_static; -+ unsigned long flags; -+ struct rq *rq; -+ -+ if (task_nice(p) == nice || nice < MIN_NICE || nice > MAX_NICE) -+ return; -+ new_static = NICE_TO_PRIO(nice); -+ /* -+ * We have to be careful, if called from sys_setpriority(), -+ * the task might be in the middle of scheduling on another CPU. -+ */ -+ rq = task_rq_lock(p, &flags); -+ update_rq_clock(rq); -+ -+ /* -+ * The RT priorities are set via sched_setscheduler(), but we still -+ * allow the 'normal' nice value to be set - but as expected -+ * it wont have any effect on scheduling until the task is -+ * not SCHED_NORMAL/SCHED_BATCH: -+ */ -+ if (has_rt_policy(p)) { -+ p->static_prio = new_static; -+ goto out_unlock; -+ } -+ -+ adjust_deadline(p, new_static); -+ old_static = p->static_prio; -+ p->static_prio = new_static; -+ p->prio = effective_prio(p); -+ -+ if (task_queued(p)) { -+ dequeue_task(rq, p, DEQUEUE_SAVE); -+ enqueue_task(rq, p, ENQUEUE_RESTORE); -+ if (new_static < old_static) -+ try_preempt(p, rq); -+ } else if (task_running(rq, p)) { -+ set_rq_task(rq, p); -+ if (old_static < new_static) -+ resched_task(p); -+ } -+out_unlock: -+ task_rq_unlock(rq, p, &flags); -+} -+EXPORT_SYMBOL(set_user_nice); -+ -+/* -+ * can_nice - check if a task can reduce its nice value -+ * @p: task -+ * @nice: nice value -+ */ -+int can_nice(const struct task_struct *p, const int nice) -+{ -+ /* Convert nice value [19,-20] to rlimit style value [1,40] */ -+ int nice_rlim = nice_to_rlimit(nice); -+ -+ return (nice_rlim <= task_rlimit(p, RLIMIT_NICE) || -+ capable(CAP_SYS_NICE)); -+} -+ -+#ifdef __ARCH_WANT_SYS_NICE -+ -+/* -+ * sys_nice - change the priority of the current process. -+ * @increment: priority increment -+ * -+ * sys_setpriority is a more generic, but much slower function that -+ * does similar things. -+ */ -+SYSCALL_DEFINE1(nice, int, increment) -+{ -+ long nice, retval; -+ -+ /* -+ * Setpriority might change our priority at the same moment. -+ * We don't have to worry. Conceptually one call occurs first -+ * and we have a single winner. -+ */ -+ -+ increment = clamp(increment, -NICE_WIDTH, NICE_WIDTH); -+ nice = task_nice(current) + increment; -+ -+ nice = clamp_val(nice, MIN_NICE, MAX_NICE); -+ if (increment < 0 && !can_nice(current, nice)) -+ return -EPERM; -+ -+ retval = security_task_setnice(current, nice); -+ if (retval) -+ return retval; -+ -+ set_user_nice(current, nice); -+ return 0; -+} -+ -+#endif -+ -+/** -+ * task_prio - return the priority value of a given task. -+ * @p: the task in question. -+ * -+ * Return: The priority value as seen by users in /proc. -+ * RT tasks are offset by -100. Normal tasks are centered around 1, value goes -+ * from 0 (SCHED_ISO) up to 82 (nice +19 SCHED_IDLEPRIO). -+ */ -+int task_prio(const struct task_struct *p) -+{ -+ int delta, prio = p->prio - MAX_RT_PRIO; -+ -+ /* rt tasks and iso tasks */ -+ if (prio <= 0) -+ goto out; -+ -+ /* Convert to ms to avoid overflows */ -+ delta = NS_TO_MS(p->deadline - task_rq(p)->niffies); -+ if (unlikely(delta < 0)) -+ delta = 0; -+ delta = delta * 40 / ms_longest_deadline_diff(); -+ if (delta <= 80) -+ prio += delta; -+ if (idleprio_task(p)) -+ prio += 40; -+out: -+ return prio; -+} -+ -+/** -+ * idle_cpu - is a given CPU idle currently? -+ * @cpu: the processor in question. -+ * -+ * Return: 1 if the CPU is currently idle. 0 otherwise. -+ */ -+int idle_cpu(int cpu) -+{ -+ return cpu_curr(cpu) == cpu_rq(cpu)->idle; -+} -+ -+/** -+ * idle_task - return the idle task for a given CPU. -+ * @cpu: the processor in question. -+ * -+ * Return: The idle task for the CPU @cpu. -+ */ -+struct task_struct *idle_task(int cpu) -+{ -+ return cpu_rq(cpu)->idle; -+} -+ -+/** -+ * find_process_by_pid - find a process with a matching PID value. -+ * @pid: the pid in question. -+ * -+ * The task of @pid, if found. %NULL otherwise. -+ */ -+static inline struct task_struct *find_process_by_pid(pid_t pid) -+{ -+ return pid ? find_task_by_vpid(pid) : current; -+} -+ -+/* Actually do priority change: must hold rq lock. */ -+static void __setscheduler(struct task_struct *p, struct rq *rq, int policy, -+ int prio, bool keep_boost) -+{ -+ int oldrtprio, oldprio; -+ -+ p->policy = policy; -+ oldrtprio = p->rt_priority; -+ p->rt_priority = prio; -+ p->normal_prio = normal_prio(p); -+ oldprio = p->prio; -+ /* -+ * Keep a potential priority boosting if called from -+ * sched_setscheduler(). -+ */ -+ p->prio = normal_prio(p); -+ if (keep_boost) -+ p->prio = rt_effective_prio(p, p->prio); -+ -+ if (task_running(rq, p)) { -+ set_rq_task(rq, p); -+ resched_task(p); -+ } else if (task_queued(p)) { -+ dequeue_task(rq, p, DEQUEUE_SAVE); -+ enqueue_task(rq, p, ENQUEUE_RESTORE); -+ if (p->prio < oldprio || p->rt_priority > oldrtprio) -+ try_preempt(p, rq); -+ } -+} -+ -+/* -+ * Check the target process has a UID that matches the current process's -+ */ -+static bool check_same_owner(struct task_struct *p) -+{ -+ const struct cred *cred = current_cred(), *pcred; -+ bool match; -+ -+ rcu_read_lock(); -+ pcred = __task_cred(p); -+ match = (uid_eq(cred->euid, pcred->euid) || -+ uid_eq(cred->euid, pcred->uid)); -+ rcu_read_unlock(); -+ return match; -+} -+ -+static int -+__sched_setscheduler(struct task_struct *p, int policy, -+ const struct sched_param *param, bool user, bool pi) -+{ -+ struct sched_param zero_param = { .sched_priority = 0 }; -+ unsigned long flags, rlim_rtprio = 0; -+ int retval, oldpolicy = -1; -+ int reset_on_fork; -+ struct rq *rq; -+ -+ /* The pi code expects interrupts enabled */ -+ BUG_ON(pi && in_interrupt()); -+ -+ if (is_rt_policy(policy) && !capable(CAP_SYS_NICE)) { -+ unsigned long lflags; -+ -+ if (!lock_task_sighand(p, &lflags)) -+ return -ESRCH; -+ rlim_rtprio = task_rlimit(p, RLIMIT_RTPRIO); -+ unlock_task_sighand(p, &lflags); -+ if (rlim_rtprio) -+ goto recheck; -+ /* -+ * If the caller requested an RT policy without having the -+ * necessary rights, we downgrade the policy to SCHED_ISO. -+ * We also set the parameter to zero to pass the checks. -+ */ -+ policy = SCHED_ISO; -+ param = &zero_param; -+ } -+recheck: -+ /* Double check policy once rq lock held */ -+ if (policy < 0) { -+ reset_on_fork = p->sched_reset_on_fork; -+ policy = oldpolicy = p->policy; -+ } else { -+ reset_on_fork = !!(policy & SCHED_RESET_ON_FORK); -+ policy &= ~SCHED_RESET_ON_FORK; -+ -+ if (!SCHED_RANGE(policy)) -+ return -EINVAL; -+ } -+ -+ /* -+ * Valid priorities for SCHED_FIFO and SCHED_RR are -+ * 1..MAX_USER_RT_PRIO-1, valid priority for SCHED_NORMAL and -+ * SCHED_BATCH is 0. -+ */ -+ if (param->sched_priority < 0 || -+ (p->mm && param->sched_priority > MAX_USER_RT_PRIO - 1) || -+ (!p->mm && param->sched_priority > MAX_RT_PRIO - 1)) -+ return -EINVAL; -+ if (is_rt_policy(policy) != (param->sched_priority != 0)) -+ return -EINVAL; -+ -+ /* -+ * Allow unprivileged RT tasks to decrease priority: -+ */ -+ if (user && !capable(CAP_SYS_NICE)) { -+ if (is_rt_policy(policy)) { -+ unsigned long rlim_rtprio = -+ task_rlimit(p, RLIMIT_RTPRIO); -+ -+ /* Can't set/change the rt policy */ -+ if (policy != p->policy && !rlim_rtprio) -+ return -EPERM; -+ -+ /* Can't increase priority */ -+ if (param->sched_priority > p->rt_priority && -+ param->sched_priority > rlim_rtprio) -+ return -EPERM; -+ } else { -+ switch (p->policy) { -+ /* -+ * Can only downgrade policies but not back to -+ * SCHED_NORMAL -+ */ -+ case SCHED_ISO: -+ if (policy == SCHED_ISO) -+ goto out; -+ if (policy != SCHED_NORMAL) -+ return -EPERM; -+ break; -+ case SCHED_BATCH: -+ if (policy == SCHED_BATCH) -+ goto out; -+ if (policy != SCHED_IDLEPRIO) -+ return -EPERM; -+ break; -+ case SCHED_IDLEPRIO: -+ if (policy == SCHED_IDLEPRIO) -+ goto out; -+ return -EPERM; -+ default: -+ break; -+ } -+ } -+ -+ /* Can't change other user's priorities */ -+ if (!check_same_owner(p)) -+ return -EPERM; -+ -+ /* Normal users shall not reset the sched_reset_on_fork flag: */ -+ if (p->sched_reset_on_fork && !reset_on_fork) -+ return -EPERM; -+ } -+ -+ if (user) { -+ retval = security_task_setscheduler(p); -+ if (retval) -+ return retval; -+ } -+ -+ /* -+ * Make sure no PI-waiters arrive (or leave) while we are -+ * changing the priority of the task: -+ * -+ * To be able to change p->policy safely, the runqueue lock must be -+ * held. -+ */ -+ rq = task_rq_lock(p, &flags); -+ update_rq_clock(rq); -+ -+ /* -+ * Changing the policy of the stop threads its a very bad idea: -+ */ -+ if (p == rq->stop) { -+ task_rq_unlock(rq, p, &flags); -+ return -EINVAL; -+ } -+ -+ /* -+ * If not changing anything there's no need to proceed further: -+ */ -+ if (unlikely(policy == p->policy && (!is_rt_policy(policy) || -+ param->sched_priority == p->rt_priority))) { -+ task_rq_unlock(rq, p, &flags); -+ return 0; -+ } -+ -+ /* Re-check policy now with rq lock held */ -+ if (unlikely(oldpolicy != -1 && oldpolicy != p->policy)) { -+ policy = oldpolicy = -1; -+ task_rq_unlock(rq, p, &flags); -+ goto recheck; -+ } -+ p->sched_reset_on_fork = reset_on_fork; -+ -+ __setscheduler(p, rq, policy, param->sched_priority, pi); -+ task_rq_unlock(rq, p, &flags); -+ -+ if (pi) -+ rt_mutex_adjust_pi(p); -+out: -+ return 0; -+} -+ -+/** -+ * sched_setscheduler - change the scheduling policy and/or RT priority of a thread. -+ * @p: the task in question. -+ * @policy: new policy. -+ * @param: structure containing the new RT priority. -+ * -+ * Return: 0 on success. An error code otherwise. -+ * -+ * NOTE that the task may be already dead. -+ */ -+int sched_setscheduler(struct task_struct *p, int policy, -+ const struct sched_param *param) -+{ -+ return __sched_setscheduler(p, policy, param, true, true); -+} -+ -+EXPORT_SYMBOL_GPL(sched_setscheduler); -+ -+int sched_setattr(struct task_struct *p, const struct sched_attr *attr) -+{ -+ const struct sched_param param = { .sched_priority = attr->sched_priority }; -+ int policy = attr->sched_policy; -+ -+ return __sched_setscheduler(p, policy, ¶m, true, true); -+} -+EXPORT_SYMBOL_GPL(sched_setattr); -+ -+/** -+ * sched_setscheduler_nocheck - change the scheduling policy and/or RT priority of a thread from kernelspace. -+ * @p: the task in question. -+ * @policy: new policy. -+ * @param: structure containing the new RT priority. -+ * -+ * Just like sched_setscheduler, only don't bother checking if the -+ * current context has permission. For example, this is needed in -+ * stop_machine(): we create temporary high priority worker threads, -+ * but our caller might not have that capability. -+ * -+ * Return: 0 on success. An error code otherwise. -+ */ -+int sched_setscheduler_nocheck(struct task_struct *p, int policy, -+ const struct sched_param *param) -+{ -+ return __sched_setscheduler(p, policy, param, false, true); -+} -+EXPORT_SYMBOL_GPL(sched_setscheduler_nocheck); -+ -+static int -+do_sched_setscheduler(pid_t pid, int policy, struct sched_param __user *param) -+{ -+ struct sched_param lparam; -+ struct task_struct *p; -+ int retval; -+ -+ if (!param || pid < 0) -+ return -EINVAL; -+ if (copy_from_user(&lparam, param, sizeof(struct sched_param))) -+ return -EFAULT; -+ -+ rcu_read_lock(); -+ retval = -ESRCH; -+ p = find_process_by_pid(pid); -+ if (p != NULL) -+ retval = sched_setscheduler(p, policy, &lparam); -+ rcu_read_unlock(); -+ -+ return retval; -+} -+ -+/* -+ * Mimics kernel/events/core.c perf_copy_attr(). -+ */ -+static int sched_copy_attr(struct sched_attr __user *uattr, -+ struct sched_attr *attr) -+{ -+ u32 size; -+ int ret; -+ -+ if (!access_ok(VERIFY_WRITE, uattr, SCHED_ATTR_SIZE_VER0)) -+ return -EFAULT; -+ -+ /* Zero the full structure, so that a short copy will be nice: */ -+ memset(attr, 0, sizeof(*attr)); -+ -+ ret = get_user(size, &uattr->size); -+ if (ret) -+ return ret; -+ -+ /* Bail out on silly large: */ -+ if (size > PAGE_SIZE) -+ goto err_size; -+ -+ /* ABI compatibility quirk: */ -+ if (!size) -+ size = SCHED_ATTR_SIZE_VER0; -+ -+ if (size < SCHED_ATTR_SIZE_VER0) -+ goto err_size; -+ -+ /* -+ * If we're handed a bigger struct than we know of, -+ * ensure all the unknown bits are 0 - i.e. new -+ * user-space does not rely on any kernel feature -+ * extensions we dont know about yet. -+ */ -+ if (size > sizeof(*attr)) { -+ unsigned char __user *addr; -+ unsigned char __user *end; -+ unsigned char val; -+ -+ addr = (void __user *)uattr + sizeof(*attr); -+ end = (void __user *)uattr + size; -+ -+ for (; addr < end; addr++) { -+ ret = get_user(val, addr); -+ if (ret) -+ return ret; -+ if (val) -+ goto err_size; -+ } -+ size = sizeof(*attr); -+ } -+ -+ ret = copy_from_user(attr, uattr, size); -+ if (ret) -+ return -EFAULT; -+ -+ /* -+ * XXX: Do we want to be lenient like existing syscalls; or do we want -+ * to be strict and return an error on out-of-bounds values? -+ */ -+ attr->sched_nice = clamp(attr->sched_nice, -20, 19); -+ -+ /* sched/core.c uses zero here but we already know ret is zero */ -+ return 0; -+ -+err_size: -+ put_user(sizeof(*attr), &uattr->size); -+ return -E2BIG; -+} -+ -+/* -+ * sched_setparam() passes in -1 for its policy, to let the functions -+ * it calls know not to change it. -+ */ -+#define SETPARAM_POLICY -1 -+ -+/** -+ * sys_sched_setscheduler - set/change the scheduler policy and RT priority -+ * @pid: the pid in question. -+ * @policy: new policy. -+ * @param: structure containing the new RT priority. -+ * -+ * Return: 0 on success. An error code otherwise. -+ */ -+SYSCALL_DEFINE3(sched_setscheduler, pid_t, pid, int, policy, struct sched_param __user *, param) -+{ -+ if (policy < 0) -+ return -EINVAL; -+ -+ return do_sched_setscheduler(pid, policy, param); -+} -+ -+/** -+ * sys_sched_setparam - set/change the RT priority of a thread -+ * @pid: the pid in question. -+ * @param: structure containing the new RT priority. -+ * -+ * Return: 0 on success. An error code otherwise. -+ */ -+SYSCALL_DEFINE2(sched_setparam, pid_t, pid, struct sched_param __user *, param) -+{ -+ return do_sched_setscheduler(pid, SETPARAM_POLICY, param); -+} -+ -+/** -+ * sys_sched_setattr - same as above, but with extended sched_attr -+ * @pid: the pid in question. -+ * @uattr: structure containing the extended parameters. -+ */ -+SYSCALL_DEFINE3(sched_setattr, pid_t, pid, struct sched_attr __user *, uattr, -+ unsigned int, flags) -+{ -+ struct sched_attr attr; -+ struct task_struct *p; -+ int retval; -+ -+ if (!uattr || pid < 0 || flags) -+ return -EINVAL; -+ -+ retval = sched_copy_attr(uattr, &attr); -+ if (retval) -+ return retval; -+ -+ if ((int)attr.sched_policy < 0) -+ return -EINVAL; -+ -+ rcu_read_lock(); -+ retval = -ESRCH; -+ p = find_process_by_pid(pid); -+ if (p != NULL) -+ retval = sched_setattr(p, &attr); -+ rcu_read_unlock(); -+ -+ return retval; -+} -+ -+/** -+ * sys_sched_getscheduler - get the policy (scheduling class) of a thread -+ * @pid: the pid in question. -+ * -+ * Return: On success, the policy of the thread. Otherwise, a negative error -+ * code. -+ */ -+SYSCALL_DEFINE1(sched_getscheduler, pid_t, pid) -+{ -+ struct task_struct *p; -+ int retval = -EINVAL; -+ -+ if (pid < 0) -+ goto out_nounlock; -+ -+ retval = -ESRCH; -+ rcu_read_lock(); -+ p = find_process_by_pid(pid); -+ if (p) { -+ retval = security_task_getscheduler(p); -+ if (!retval) -+ retval = p->policy; -+ } -+ rcu_read_unlock(); -+ -+out_nounlock: -+ return retval; -+} -+ -+/** -+ * sys_sched_getscheduler - get the RT priority of a thread -+ * @pid: the pid in question. -+ * @param: structure containing the RT priority. -+ * -+ * Return: On success, 0 and the RT priority is in @param. Otherwise, an error -+ * code. -+ */ -+SYSCALL_DEFINE2(sched_getparam, pid_t, pid, struct sched_param __user *, param) -+{ -+ struct sched_param lp = { .sched_priority = 0 }; -+ struct task_struct *p; -+ int retval = -EINVAL; -+ -+ if (!param || pid < 0) -+ goto out_nounlock; -+ -+ rcu_read_lock(); -+ p = find_process_by_pid(pid); -+ retval = -ESRCH; -+ if (!p) -+ goto out_unlock; -+ -+ retval = security_task_getscheduler(p); -+ if (retval) -+ goto out_unlock; -+ -+ if (has_rt_policy(p)) -+ lp.sched_priority = p->rt_priority; -+ rcu_read_unlock(); -+ -+ /* -+ * This one might sleep, we cannot do it with a spinlock held ... -+ */ -+ retval = copy_to_user(param, &lp, sizeof(*param)) ? -EFAULT : 0; -+ -+out_nounlock: -+ return retval; -+ -+out_unlock: -+ rcu_read_unlock(); -+ return retval; -+} -+ -+static int sched_read_attr(struct sched_attr __user *uattr, -+ struct sched_attr *attr, -+ unsigned int usize) -+{ -+ int ret; -+ -+ if (!access_ok(VERIFY_WRITE, uattr, usize)) -+ return -EFAULT; -+ -+ /* -+ * If we're handed a smaller struct than we know of, -+ * ensure all the unknown bits are 0 - i.e. old -+ * user-space does not get uncomplete information. -+ */ -+ if (usize < sizeof(*attr)) { -+ unsigned char *addr; -+ unsigned char *end; -+ -+ addr = (void *)attr + usize; -+ end = (void *)attr + sizeof(*attr); -+ -+ for (; addr < end; addr++) { -+ if (*addr) -+ return -EFBIG; -+ } -+ -+ attr->size = usize; -+ } -+ -+ ret = copy_to_user(uattr, attr, attr->size); -+ if (ret) -+ return -EFAULT; -+ -+ /* sched/core.c uses zero here but we already know ret is zero */ -+ return ret; -+} -+ -+/** -+ * sys_sched_getattr - similar to sched_getparam, but with sched_attr -+ * @pid: the pid in question. -+ * @uattr: structure containing the extended parameters. -+ * @size: sizeof(attr) for fwd/bwd comp. -+ * @flags: for future extension. -+ */ -+SYSCALL_DEFINE4(sched_getattr, pid_t, pid, struct sched_attr __user *, uattr, -+ unsigned int, size, unsigned int, flags) -+{ -+ struct sched_attr attr = { -+ .size = sizeof(struct sched_attr), -+ }; -+ struct task_struct *p; -+ int retval; -+ -+ if (!uattr || pid < 0 || size > PAGE_SIZE || -+ size < SCHED_ATTR_SIZE_VER0 || flags) -+ return -EINVAL; -+ -+ rcu_read_lock(); -+ p = find_process_by_pid(pid); -+ retval = -ESRCH; -+ if (!p) -+ goto out_unlock; -+ -+ retval = security_task_getscheduler(p); -+ if (retval) -+ goto out_unlock; -+ -+ attr.sched_policy = p->policy; -+ if (rt_task(p)) -+ attr.sched_priority = p->rt_priority; -+ else -+ attr.sched_nice = task_nice(p); -+ -+ rcu_read_unlock(); -+ -+ retval = sched_read_attr(uattr, &attr, size); -+ return retval; -+ -+out_unlock: -+ rcu_read_unlock(); -+ return retval; -+} -+ -+long sched_setaffinity(pid_t pid, const struct cpumask *in_mask) -+{ -+ cpumask_var_t cpus_allowed, new_mask; -+ struct task_struct *p; -+ int retval; -+ -+ rcu_read_lock(); -+ -+ p = find_process_by_pid(pid); -+ if (!p) { -+ rcu_read_unlock(); -+ return -ESRCH; -+ } -+ -+ /* Prevent p going away */ -+ get_task_struct(p); -+ rcu_read_unlock(); -+ -+ if (p->flags & PF_NO_SETAFFINITY) { -+ retval = -EINVAL; -+ goto out_put_task; -+ } -+ if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) { -+ retval = -ENOMEM; -+ goto out_put_task; -+ } -+ if (!alloc_cpumask_var(&new_mask, GFP_KERNEL)) { -+ retval = -ENOMEM; -+ goto out_free_cpus_allowed; -+ } -+ retval = -EPERM; -+ if (!check_same_owner(p)) { -+ rcu_read_lock(); -+ if (!ns_capable(__task_cred(p)->user_ns, CAP_SYS_NICE)) { -+ rcu_read_unlock(); -+ goto out_unlock; -+ } -+ rcu_read_unlock(); -+ } -+ -+ retval = security_task_setscheduler(p); -+ if (retval) -+ goto out_unlock; -+ -+ cpuset_cpus_allowed(p, cpus_allowed); -+ cpumask_and(new_mask, in_mask, cpus_allowed); -+again: -+ retval = __set_cpus_allowed_ptr(p, new_mask, true); -+ -+ if (!retval) { -+ cpuset_cpus_allowed(p, cpus_allowed); -+ if (!cpumask_subset(new_mask, cpus_allowed)) { -+ /* -+ * We must have raced with a concurrent cpuset -+ * update. Just reset the cpus_allowed to the -+ * cpuset's cpus_allowed -+ */ -+ cpumask_copy(new_mask, cpus_allowed); -+ goto again; -+ } -+ } -+out_unlock: -+ free_cpumask_var(new_mask); -+out_free_cpus_allowed: -+ free_cpumask_var(cpus_allowed); -+out_put_task: -+ put_task_struct(p); -+ return retval; -+} -+ -+static int get_user_cpu_mask(unsigned long __user *user_mask_ptr, unsigned len, -+ cpumask_t *new_mask) -+{ -+ if (len < cpumask_size()) -+ cpumask_clear(new_mask); -+ else if (len > cpumask_size()) -+ len = cpumask_size(); -+ -+ return copy_from_user(new_mask, user_mask_ptr, len) ? -EFAULT : 0; -+} -+ -+ -+/** -+ * sys_sched_setaffinity - set the CPU affinity of a process -+ * @pid: pid of the process -+ * @len: length in bytes of the bitmask pointed to by user_mask_ptr -+ * @user_mask_ptr: user-space pointer to the new CPU mask -+ * -+ * Return: 0 on success. An error code otherwise. -+ */ -+SYSCALL_DEFINE3(sched_setaffinity, pid_t, pid, unsigned int, len, -+ unsigned long __user *, user_mask_ptr) -+{ -+ cpumask_var_t new_mask; -+ int retval; -+ -+ if (!alloc_cpumask_var(&new_mask, GFP_KERNEL)) -+ return -ENOMEM; -+ -+ retval = get_user_cpu_mask(user_mask_ptr, len, new_mask); -+ if (retval == 0) -+ retval = sched_setaffinity(pid, new_mask); -+ free_cpumask_var(new_mask); -+ return retval; -+} -+ -+long sched_getaffinity(pid_t pid, cpumask_t *mask) -+{ -+ struct task_struct *p; -+ unsigned long flags; -+ int retval; -+ -+ get_online_cpus(); -+ rcu_read_lock(); -+ -+ retval = -ESRCH; -+ p = find_process_by_pid(pid); -+ if (!p) -+ goto out_unlock; -+ -+ retval = security_task_getscheduler(p); -+ if (retval) -+ goto out_unlock; -+ -+ raw_spin_lock_irqsave(&p->pi_lock, flags); -+ cpumask_and(mask, &p->cpus_allowed, cpu_active_mask); -+ raw_spin_unlock_irqrestore(&p->pi_lock, flags); -+ -+out_unlock: -+ rcu_read_unlock(); -+ put_online_cpus(); -+ -+ return retval; -+} -+ -+/** -+ * sys_sched_getaffinity - get the CPU affinity of a process -+ * @pid: pid of the process -+ * @len: length in bytes of the bitmask pointed to by user_mask_ptr -+ * @user_mask_ptr: user-space pointer to hold the current CPU mask -+ * -+ * Return: 0 on success. An error code otherwise. -+ */ -+SYSCALL_DEFINE3(sched_getaffinity, pid_t, pid, unsigned int, len, -+ unsigned long __user *, user_mask_ptr) -+{ -+ int ret; -+ cpumask_var_t mask; -+ -+ if ((len * BITS_PER_BYTE) < nr_cpu_ids) -+ return -EINVAL; -+ if (len & (sizeof(unsigned long)-1)) -+ return -EINVAL; -+ -+ if (!alloc_cpumask_var(&mask, GFP_KERNEL)) -+ return -ENOMEM; -+ -+ ret = sched_getaffinity(pid, mask); -+ if (ret == 0) { -+ size_t retlen = min_t(size_t, len, cpumask_size()); -+ -+ if (copy_to_user(user_mask_ptr, mask, retlen)) -+ ret = -EFAULT; -+ else -+ ret = retlen; -+ } -+ free_cpumask_var(mask); -+ -+ return ret; -+} -+ -+/** -+ * sys_sched_yield - yield the current processor to other threads. -+ * -+ * This function yields the current CPU to other tasks. It does this by -+ * scheduling away the current task. If it still has the earliest deadline -+ * it will be scheduled again as the next task. -+ * -+ * Return: 0. -+ */ -+SYSCALL_DEFINE0(sched_yield) -+{ -+ struct rq *rq; -+ -+ if (!sched_yield_type) -+ goto out; -+ -+ local_irq_disable(); -+ rq = this_rq(); -+ rq_lock(rq); -+ -+ if (sched_yield_type > 1) -+ time_slice_expired(current, rq); -+ schedstat_inc(rq->yld_count); -+ -+ /* -+ * Since we are going to call schedule() anyway, there's -+ * no need to preempt or enable interrupts: -+ */ -+ preempt_disable(); -+ rq_unlock(rq); -+ sched_preempt_enable_no_resched(); -+ -+ schedule(); -+out: -+ return 0; -+} -+ -+#ifndef CONFIG_PREEMPT -+int __sched _cond_resched(void) -+{ -+ if (should_resched(0)) { -+ preempt_schedule_common(); -+ return 1; -+ } -+ return 0; -+} -+EXPORT_SYMBOL(_cond_resched); -+#endif -+ -+/* -+ * __cond_resched_lock() - if a reschedule is pending, drop the given lock, -+ * call schedule, and on return reacquire the lock. -+ * -+ * This works OK both with and without CONFIG_PREEMPT. We do strange low-level -+ * operations here to prevent schedule() from being called twice (once via -+ * spin_unlock(), once by hand). -+ */ -+int __cond_resched_lock(spinlock_t *lock) -+{ -+ int resched = should_resched(PREEMPT_LOCK_OFFSET); -+ int ret = 0; -+ -+ lockdep_assert_held(lock); -+ -+ if (spin_needbreak(lock) || resched) { -+ spin_unlock(lock); -+ if (resched) -+ preempt_schedule_common(); -+ else -+ cpu_relax(); -+ ret = 1; -+ spin_lock(lock); -+ } -+ return ret; -+} -+EXPORT_SYMBOL(__cond_resched_lock); -+ -+int __sched __cond_resched_softirq(void) -+{ -+ BUG_ON(!in_softirq()); -+ -+ if (should_resched(SOFTIRQ_DISABLE_OFFSET)) { -+ local_bh_enable(); -+ preempt_schedule_common(); -+ local_bh_disable(); -+ return 1; -+ } -+ return 0; -+} -+EXPORT_SYMBOL(__cond_resched_softirq); -+ -+/** -+ * yield - yield the current processor to other threads. -+ * -+ * Do not ever use this function, there's a 99% chance you're doing it wrong. -+ * -+ * The scheduler is at all times free to pick the calling task as the most -+ * eligible task to run, if removing the yield() call from your code breaks -+ * it, its already broken. -+ * -+ * Typical broken usage is: -+ * -+ * while (!event) -+ * yield(); -+ * -+ * where one assumes that yield() will let 'the other' process run that will -+ * make event true. If the current task is a SCHED_FIFO task that will never -+ * happen. Never use yield() as a progress guarantee!! -+ * -+ * If you want to use yield() to wait for something, use wait_event(). -+ * If you want to use yield() to be 'nice' for others, use cond_resched(). -+ * If you still want to use yield(), do not! -+ */ -+void __sched yield(void) -+{ -+ set_current_state(TASK_RUNNING); -+ sys_sched_yield(); -+} -+EXPORT_SYMBOL(yield); -+ -+/** -+ * yield_to - yield the current processor to another thread in -+ * your thread group, or accelerate that thread toward the -+ * processor it's on. -+ * @p: target task -+ * @preempt: whether task preemption is allowed or not -+ * -+ * It's the caller's job to ensure that the target task struct -+ * can't go away on us before we can do any checks. -+ * -+ * Return: -+ * true (>0) if we indeed boosted the target task. -+ * false (0) if we failed to boost the target. -+ * -ESRCH if there's no task to yield to. -+ */ -+int __sched yield_to(struct task_struct *p, bool preempt) -+{ -+ struct task_struct *rq_p; -+ struct rq *rq, *p_rq; -+ unsigned long flags; -+ int yielded = 0; -+ -+ local_irq_save(flags); -+ rq = this_rq(); -+ -+again: -+ p_rq = task_rq(p); -+ /* -+ * If we're the only runnable task on the rq and target rq also -+ * has only one task, there's absolutely no point in yielding. -+ */ -+ if (task_running(p_rq, p) || p->state) { -+ yielded = -ESRCH; -+ goto out_irq; -+ } -+ -+ double_rq_lock(rq, p_rq); -+ if (unlikely(task_rq(p) != p_rq)) { -+ double_rq_unlock(rq, p_rq); -+ goto again; -+ } -+ -+ yielded = 1; -+ schedstat_inc(rq->yld_count); -+ rq_p = rq->curr; -+ if (p->deadline > rq_p->deadline) -+ p->deadline = rq_p->deadline; -+ p->time_slice += rq_p->time_slice; -+ if (p->time_slice > timeslice()) -+ p->time_slice = timeslice(); -+ time_slice_expired(rq_p, rq); -+ if (preempt && rq != p_rq) -+ resched_task(p_rq->curr); -+ double_rq_unlock(rq, p_rq); -+out_irq: -+ local_irq_restore(flags); -+ -+ if (yielded > 0) -+ schedule(); -+ return yielded; -+} -+EXPORT_SYMBOL_GPL(yield_to); -+ -+int io_schedule_prepare(void) -+{ -+ int old_iowait = current->in_iowait; -+ -+ current->in_iowait = 1; -+ blk_schedule_flush_plug(current); -+ -+ return old_iowait; -+} -+ -+void io_schedule_finish(int token) -+{ -+ current->in_iowait = token; -+} -+ -+/* -+ * This task is about to go to sleep on IO. Increment rq->nr_iowait so -+ * that process accounting knows that this is a task in IO wait state. -+ * -+ * But don't do that if it is a deliberate, throttling IO wait (this task -+ * has set its backing_dev_info: the queue against which it should throttle) -+ */ -+ -+long __sched io_schedule_timeout(long timeout) -+{ -+ int token; -+ long ret; -+ -+ token = io_schedule_prepare(); -+ ret = schedule_timeout(timeout); -+ io_schedule_finish(token); -+ -+ return ret; -+} -+EXPORT_SYMBOL(io_schedule_timeout); -+ -+void io_schedule(void) -+{ -+ int token; -+ -+ token = io_schedule_prepare(); -+ schedule(); -+ io_schedule_finish(token); -+} -+EXPORT_SYMBOL(io_schedule); -+ -+/** -+ * sys_sched_get_priority_max - return maximum RT priority. -+ * @policy: scheduling class. -+ * -+ * Return: On success, this syscall returns the maximum -+ * rt_priority that can be used by a given scheduling class. -+ * On failure, a negative error code is returned. -+ */ -+SYSCALL_DEFINE1(sched_get_priority_max, int, policy) -+{ -+ int ret = -EINVAL; -+ -+ switch (policy) { -+ case SCHED_FIFO: -+ case SCHED_RR: -+ ret = MAX_USER_RT_PRIO-1; -+ break; -+ case SCHED_NORMAL: -+ case SCHED_BATCH: -+ case SCHED_ISO: -+ case SCHED_IDLEPRIO: -+ ret = 0; -+ break; -+ } -+ return ret; -+} -+ -+/** -+ * sys_sched_get_priority_min - return minimum RT priority. -+ * @policy: scheduling class. -+ * -+ * Return: On success, this syscall returns the minimum -+ * rt_priority that can be used by a given scheduling class. -+ * On failure, a negative error code is returned. -+ */ -+SYSCALL_DEFINE1(sched_get_priority_min, int, policy) -+{ -+ int ret = -EINVAL; -+ -+ switch (policy) { -+ case SCHED_FIFO: -+ case SCHED_RR: -+ ret = 1; -+ break; -+ case SCHED_NORMAL: -+ case SCHED_BATCH: -+ case SCHED_ISO: -+ case SCHED_IDLEPRIO: -+ ret = 0; -+ break; -+ } -+ return ret; -+} -+ -+/** -+ * sys_sched_rr_get_interval - return the default timeslice of a process. -+ * @pid: pid of the process. -+ * @interval: userspace pointer to the timeslice value. -+ * -+ * -+ * Return: On success, 0 and the timeslice is in @interval. Otherwise, -+ * an error code. -+ */ -+SYSCALL_DEFINE2(sched_rr_get_interval, pid_t, pid, -+ struct timespec __user *, interval) -+{ -+ struct task_struct *p; -+ unsigned int time_slice; -+ unsigned long flags; -+ struct timespec t; -+ struct rq *rq; -+ int retval; -+ -+ if (pid < 0) -+ return -EINVAL; -+ -+ retval = -ESRCH; -+ rcu_read_lock(); -+ p = find_process_by_pid(pid); -+ if (!p) -+ goto out_unlock; -+ -+ retval = security_task_getscheduler(p); -+ if (retval) -+ goto out_unlock; -+ -+ rq = task_rq_lock(p, &flags); -+ time_slice = p->policy == SCHED_FIFO ? 0 : MS_TO_NS(task_timeslice(p)); -+ task_rq_unlock(rq, p, &flags); -+ -+ rcu_read_unlock(); -+ t = ns_to_timespec(time_slice); -+ retval = copy_to_user(interval, &t, sizeof(t)) ? -EFAULT : 0; -+ return retval; -+ -+out_unlock: -+ rcu_read_unlock(); -+ return retval; -+} -+ -+void sched_show_task(struct task_struct *p) -+{ -+ unsigned long free = 0; -+ int ppid; -+ -+ if (!try_get_task_stack(p)) -+ return; -+ -+ printk(KERN_INFO "%-15.15s %c", p->comm, task_state_to_char(p)); -+ -+ if (p->state == TASK_RUNNING) -+ printk(KERN_CONT " running task "); -+#ifdef CONFIG_DEBUG_STACK_USAGE -+ free = stack_not_used(p); -+#endif -+ ppid = 0; -+ rcu_read_lock(); -+ if (pid_alive(p)) -+ ppid = task_pid_nr(rcu_dereference(p->real_parent)); -+ rcu_read_unlock(); -+ printk(KERN_CONT "%5lu %5d %6d 0x%08lx\n", free, -+ task_pid_nr(p), ppid, -+ (unsigned long)task_thread_info(p)->flags); -+ -+ print_worker_info(KERN_INFO, p); -+ show_stack(p, NULL); -+ put_task_stack(p); -+} -+ -+static inline bool -+state_filter_match(unsigned long state_filter, struct task_struct *p) -+{ -+ /* no filter, everything matches */ -+ if (!state_filter) -+ return true; -+ -+ /* filter, but doesn't match */ -+ if (!(p->state & state_filter)) -+ return false; -+ -+ /* -+ * When looking for TASK_UNINTERRUPTIBLE skip TASK_IDLE (allows -+ * TASK_KILLABLE). -+ */ -+ if (state_filter == TASK_UNINTERRUPTIBLE && p->state == TASK_IDLE) -+ return false; -+ -+ return true; -+} -+ -+void show_state_filter(unsigned long state_filter) -+{ -+ struct task_struct *g, *p; -+ -+#if BITS_PER_LONG == 32 -+ printk(KERN_INFO -+ " task PC stack pid father\n"); -+#else -+ printk(KERN_INFO -+ " task PC stack pid father\n"); -+#endif -+ rcu_read_lock(); -+ for_each_process_thread(g, p) { -+ /* -+ * reset the NMI-timeout, listing all files on a slow -+ * console might take a lot of time: -+ * Also, reset softlockup watchdogs on all CPUs, because -+ * another CPU might be blocked waiting for us to process -+ * an IPI. -+ */ -+ touch_nmi_watchdog(); -+ touch_all_softlockup_watchdogs(); -+ if (state_filter_match(state_filter, p)) -+ sched_show_task(p); -+ } -+ -+ rcu_read_unlock(); -+ /* -+ * Only show locks if all tasks are dumped: -+ */ -+ if (!state_filter) -+ debug_show_all_locks(); -+} -+ -+void dump_cpu_task(int cpu) -+{ -+ pr_info("Task dump for CPU %d:\n", cpu); -+ sched_show_task(cpu_curr(cpu)); -+} -+ -+#ifdef CONFIG_SMP -+void set_cpus_allowed_common(struct task_struct *p, const struct cpumask *new_mask) -+{ -+ cpumask_copy(&p->cpus_allowed, new_mask); -+ p->nr_cpus_allowed = cpumask_weight(new_mask); -+} -+ -+void __do_set_cpus_allowed(struct task_struct *p, const struct cpumask *new_mask) -+{ -+ struct rq *rq = task_rq(p); -+ -+ lockdep_assert_held(&p->pi_lock); -+ -+ cpumask_copy(&p->cpus_allowed, new_mask); -+ -+ if (task_queued(p)) { -+ /* -+ * Because __kthread_bind() calls this on blocked tasks without -+ * holding rq->lock. -+ */ -+ lockdep_assert_held(&rq->lock); -+ } -+} -+ -+/* -+ * Calling do_set_cpus_allowed from outside the scheduler code should not be -+ * called on a running or queued task. We should be holding pi_lock. -+ */ -+void do_set_cpus_allowed(struct task_struct *p, const struct cpumask *new_mask) -+{ -+ __do_set_cpus_allowed(p, new_mask); -+ if (needs_other_cpu(p, task_cpu(p))) { -+ struct rq *rq; -+ -+ rq = __task_rq_lock(p); -+ set_task_cpu(p, valid_task_cpu(p)); -+ resched_task(p); -+ __task_rq_unlock(rq); -+ } -+} -+#endif -+ -+/** -+ * init_idle - set up an idle thread for a given CPU -+ * @idle: task in question -+ * @cpu: cpu the idle task belongs to -+ * -+ * NOTE: this function does not set the idle thread's NEED_RESCHED -+ * flag, to make booting more robust. -+ */ -+void init_idle(struct task_struct *idle, int cpu) -+{ -+ struct rq *rq = cpu_rq(cpu); -+ unsigned long flags; -+ -+ raw_spin_lock_irqsave(&idle->pi_lock, flags); -+ raw_spin_lock(&rq->lock); -+ idle->last_ran = rq->niffies; -+ time_slice_expired(idle, rq); -+ idle->state = TASK_RUNNING; -+ /* Setting prio to illegal value shouldn't matter when never queued */ -+ idle->prio = PRIO_LIMIT; -+ -+ kasan_unpoison_task_stack(idle); -+ -+#ifdef CONFIG_SMP -+ /* -+ * It's possible that init_idle() gets called multiple times on a task, -+ * in that case do_set_cpus_allowed() will not do the right thing. -+ * -+ * And since this is boot we can forgo the serialisation. -+ */ -+ set_cpus_allowed_common(idle, cpumask_of(cpu)); -+#ifdef CONFIG_SMT_NICE -+ idle->smt_bias = 0; -+#endif -+#endif -+ set_rq_task(rq, idle); -+ -+ /* Silence PROVE_RCU */ -+ rcu_read_lock(); -+ set_task_cpu(idle, cpu); -+ rcu_read_unlock(); -+ -+ rq->curr = rq->idle = idle; -+ idle->on_rq = TASK_ON_RQ_QUEUED; -+ raw_spin_unlock(&rq->lock); -+ raw_spin_unlock_irqrestore(&idle->pi_lock, flags); -+ -+ /* Set the preempt count _outside_ the spinlocks! */ -+ init_idle_preempt_count(idle, cpu); -+ -+ ftrace_graph_init_idle_task(idle, cpu); -+ vtime_init_idle(idle, cpu); -+#ifdef CONFIG_SMP -+ sprintf(idle->comm, "%s/%d", INIT_TASK_COMM, cpu); -+#endif -+} -+ -+int cpuset_cpumask_can_shrink(const struct cpumask __maybe_unused *cur, -+ const struct cpumask __maybe_unused *trial) -+{ -+ return 1; -+} -+ -+int task_can_attach(struct task_struct *p, -+ const struct cpumask *cs_cpus_allowed) -+{ -+ int ret = 0; -+ -+ /* -+ * Kthreads which disallow setaffinity shouldn't be moved -+ * to a new cpuset; we don't want to change their CPU -+ * affinity and isolating such threads by their set of -+ * allowed nodes is unnecessary. Thus, cpusets are not -+ * applicable for such threads. This prevents checking for -+ * success of set_cpus_allowed_ptr() on all attached tasks -+ * before cpus_allowed may be changed. -+ */ -+ if (p->flags & PF_NO_SETAFFINITY) -+ ret = -EINVAL; -+ -+ return ret; -+} -+ -+void resched_cpu(int cpu) -+{ -+ struct rq *rq = cpu_rq(cpu); -+ unsigned long flags; -+ -+ rq_lock_irqsave(rq, &flags); -+ resched_task(cpu_curr(cpu)); -+ rq_unlock_irqrestore(rq, &flags); -+} -+ -+#ifdef CONFIG_SMP -+#ifdef CONFIG_NO_HZ_COMMON -+void nohz_balance_enter_idle(int cpu) -+{ -+} -+ -+void select_nohz_load_balancer(int stop_tick) -+{ -+} -+ -+void set_cpu_sd_state_idle(void) {} -+ -+/* -+ * In the semi idle case, use the nearest busy CPU for migrating timers -+ * from an idle CPU. This is good for power-savings. -+ * -+ * We don't do similar optimization for completely idle system, as -+ * selecting an idle CPU will add more delays to the timers than intended -+ * (as that CPU's timer base may not be uptodate wrt jiffies etc). -+ */ -+int get_nohz_timer_target(void) -+{ -+ int i, cpu = smp_processor_id(); -+ struct sched_domain *sd; -+ -+ if (!idle_cpu(cpu) && is_housekeeping_cpu(cpu)) -+ return cpu; -+ -+ rcu_read_lock(); -+ for_each_domain(cpu, sd) { -+ for_each_cpu(i, sched_domain_span(sd)) { -+ if (cpu == i) -+ continue; -+ -+ if (!idle_cpu(i) && is_housekeeping_cpu(i)) { -+ cpu = i; -+ cpu = i; -+ goto unlock; -+ } -+ } -+ } -+ -+ if (!is_housekeeping_cpu(cpu)) -+ cpu = housekeeping_any_cpu(); -+unlock: -+ rcu_read_unlock(); -+ return cpu; -+} -+ -+/* -+ * When add_timer_on() enqueues a timer into the timer wheel of an -+ * idle CPU then this timer might expire before the next timer event -+ * which is scheduled to wake up that CPU. In case of a completely -+ * idle system the next event might even be infinite time into the -+ * future. wake_up_idle_cpu() ensures that the CPU is woken up and -+ * leaves the inner idle loop so the newly added timer is taken into -+ * account when the CPU goes back to idle and evaluates the timer -+ * wheel for the next timer event. -+ */ -+void wake_up_idle_cpu(int cpu) -+{ -+ if (cpu == smp_processor_id()) -+ return; -+ -+ if (set_nr_and_not_polling(cpu_rq(cpu)->idle)) -+ smp_sched_reschedule(cpu); -+ else -+ trace_sched_wake_idle_without_ipi(cpu); -+} -+ -+static bool wake_up_full_nohz_cpu(int cpu) -+{ -+ /* -+ * We just need the target to call irq_exit() and re-evaluate -+ * the next tick. The nohz full kick at least implies that. -+ * If needed we can still optimize that later with an -+ * empty IRQ. -+ */ -+ if (cpu_is_offline(cpu)) -+ return true; /* Don't try to wake offline CPUs. */ -+ if (tick_nohz_full_cpu(cpu)) { -+ if (cpu != smp_processor_id() || -+ tick_nohz_tick_stopped()) -+ tick_nohz_full_kick_cpu(cpu); -+ return true; -+ } -+ -+ return false; -+} -+ -+/* -+ * Wake up the specified CPU. If the CPU is going offline, it is the -+ * caller's responsibility to deal with the lost wakeup, for example, -+ * by hooking into the CPU_DEAD notifier like timers and hrtimers do. -+ */ -+void wake_up_nohz_cpu(int cpu) -+{ -+ if (!wake_up_full_nohz_cpu(cpu)) -+ wake_up_idle_cpu(cpu); -+} -+#endif /* CONFIG_NO_HZ_COMMON */ -+ -+/* -+ * Change a given task's CPU affinity. Migrate the thread to a -+ * proper CPU and schedule it away if the CPU it's executing on -+ * is removed from the allowed bitmask. -+ * -+ * NOTE: the caller must have a valid reference to the task, the -+ * task must not exit() & deallocate itself prematurely. The -+ * call is not atomic; no spinlocks may be held. -+ */ -+static int __set_cpus_allowed_ptr(struct task_struct *p, -+ const struct cpumask *new_mask, bool check) -+{ -+ const struct cpumask *cpu_valid_mask = cpu_active_mask; -+ bool queued = false, running_wrong = false, kthread; -+ struct cpumask old_mask; -+ unsigned long flags; -+ struct rq *rq; -+ int ret = 0; -+ -+ rq = task_rq_lock(p, &flags); -+ update_rq_clock(rq); -+ -+ kthread = !!(p->flags & PF_KTHREAD); -+ if (kthread) { -+ /* -+ * Kernel threads are allowed on online && !active CPUs -+ */ -+ cpu_valid_mask = cpu_online_mask; -+ } -+ -+ /* -+ * Must re-check here, to close a race against __kthread_bind(), -+ * sched_setaffinity() is not guaranteed to observe the flag. -+ */ -+ if (check && (p->flags & PF_NO_SETAFFINITY)) { -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ cpumask_copy(&old_mask, &p->cpus_allowed); -+ if (cpumask_equal(&old_mask, new_mask)) -+ goto out; -+ -+ if (!cpumask_intersects(new_mask, cpu_valid_mask)) { -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ queued = task_queued(p); -+ __do_set_cpus_allowed(p, new_mask); -+ -+ if (kthread) { -+ /* -+ * For kernel threads that do indeed end up on online && -+ * !active we want to ensure they are strict per-CPU threads. -+ */ -+ WARN_ON(cpumask_intersects(new_mask, cpu_online_mask) && -+ !cpumask_intersects(new_mask, cpu_active_mask) && -+ p->nr_cpus_allowed != 1); -+ } -+ -+ /* Can the task run on the task's current CPU? If so, we're done */ -+ if (cpumask_test_cpu(task_cpu(p), new_mask)) -+ goto out; -+ -+ if (task_running(rq, p)) { -+ /* Task is running on the wrong cpu now, reschedule it. */ -+ if (rq == this_rq()) { -+ set_tsk_need_resched(p); -+ running_wrong = true; -+ } else -+ resched_task(p); -+ } else { -+ int cpu = cpumask_any_and(cpu_valid_mask, new_mask); -+ -+ if (queued) { -+ /* -+ * Switch runqueue locks after dequeueing the task -+ * here while still holding the pi_lock to be holding -+ * the correct lock for enqueueing. -+ */ -+ dequeue_task(rq, p, 0); -+ rq_unlock(rq); -+ -+ rq = cpu_rq(cpu); -+ rq_lock(rq); -+ } -+ set_task_cpu(p, cpu); -+ if (queued) -+ enqueue_task(rq, p, 0); -+ } -+ if (queued) -+ try_preempt(p, rq); -+ if (running_wrong) -+ preempt_disable(); -+out: -+ task_rq_unlock(rq, p, &flags); -+ -+ if (running_wrong) { -+ __schedule(true); -+ preempt_enable(); -+ } -+ -+ return ret; -+} -+ -+int set_cpus_allowed_ptr(struct task_struct *p, const struct cpumask *new_mask) -+{ -+ return __set_cpus_allowed_ptr(p, new_mask, false); -+} -+EXPORT_SYMBOL_GPL(set_cpus_allowed_ptr); -+ -+#ifdef CONFIG_HOTPLUG_CPU -+/* -+ * Run through task list and find tasks affined to the dead cpu, then remove -+ * that cpu from the list, enable cpu0 and set the zerobound flag. Must hold -+ * cpu 0 and src_cpu's runqueue locks. -+ */ -+static void bind_zero(int src_cpu) -+{ -+ struct task_struct *p, *t; -+ struct rq *rq0; -+ int bound = 0; -+ -+ if (src_cpu == 0) -+ return; -+ -+ rq0 = cpu_rq(0); -+ -+ do_each_thread(t, p) { -+ if (cpumask_test_cpu(src_cpu, &p->cpus_allowed)) { -+ bool local = (task_cpu(p) == src_cpu); -+ struct rq *rq = task_rq(p); -+ -+ /* task_running is the cpu stopper thread */ -+ if (local && task_running(rq, p)) -+ continue; -+ atomic_clear_cpu(src_cpu, &p->cpus_allowed); -+ atomic_set_cpu(0, &p->cpus_allowed); -+ p->zerobound = true; -+ bound++; -+ if (local) { -+ bool queued = task_queued(p); -+ -+ if (queued) -+ dequeue_task(rq, p, 0); -+ set_task_cpu(p, 0); -+ if (queued) -+ enqueue_task(rq0, p, 0); -+ } -+ } -+ } while_each_thread(t, p); -+ -+ if (bound) { -+ printk(KERN_INFO "Removed affinity for %d processes to cpu %d\n", -+ bound, src_cpu); -+ } -+} -+ -+/* Find processes with the zerobound flag and reenable their affinity for the -+ * CPU coming alive. */ -+static void unbind_zero(int src_cpu) -+{ -+ int unbound = 0, zerobound = 0; -+ struct task_struct *p, *t; -+ -+ if (src_cpu == 0) -+ return; -+ -+ do_each_thread(t, p) { -+ if (!p->mm) -+ p->zerobound = false; -+ if (p->zerobound) { -+ unbound++; -+ cpumask_set_cpu(src_cpu, &p->cpus_allowed); -+ /* Once every CPU affinity has been re-enabled, remove -+ * the zerobound flag */ -+ if (cpumask_subset(cpu_possible_mask, &p->cpus_allowed)) { -+ p->zerobound = false; -+ zerobound++; -+ } -+ } -+ } while_each_thread(t, p); -+ -+ if (unbound) { -+ printk(KERN_INFO "Added affinity for %d processes to cpu %d\n", -+ unbound, src_cpu); -+ } -+ if (zerobound) { -+ printk(KERN_INFO "Released forced binding to cpu0 for %d processes\n", -+ zerobound); -+ } -+} -+ -+/* -+ * Ensure that the idle task is using init_mm right before its cpu goes -+ * offline. -+ */ -+void idle_task_exit(void) -+{ -+ struct mm_struct *mm = current->active_mm; -+ -+ BUG_ON(cpu_online(smp_processor_id())); -+ -+ if (mm != &init_mm) { -+ switch_mm(mm, &init_mm, current); -+ finish_arch_post_lock_switch(); -+ } -+ mmdrop(mm); -+} -+#else /* CONFIG_HOTPLUG_CPU */ -+static void unbind_zero(int src_cpu) {} -+#endif /* CONFIG_HOTPLUG_CPU */ -+ -+void sched_set_stop_task(int cpu, struct task_struct *stop) -+{ -+ struct sched_param stop_param = { .sched_priority = STOP_PRIO }; -+ struct sched_param start_param = { .sched_priority = 0 }; -+ struct task_struct *old_stop = cpu_rq(cpu)->stop; -+ -+ if (stop) { -+ /* -+ * Make it appear like a SCHED_FIFO task, its something -+ * userspace knows about and won't get confused about. -+ * -+ * Also, it will make PI more or less work without too -+ * much confusion -- but then, stop work should not -+ * rely on PI working anyway. -+ */ -+ sched_setscheduler_nocheck(stop, SCHED_FIFO, &stop_param); -+ } -+ -+ cpu_rq(cpu)->stop = stop; -+ -+ if (old_stop) { -+ /* -+ * Reset it back to a normal scheduling policy so that -+ * it can die in pieces. -+ */ -+ sched_setscheduler_nocheck(old_stop, SCHED_NORMAL, &start_param); -+ } -+} -+ -+#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SYSCTL) -+ -+static struct ctl_table sd_ctl_dir[] = { -+ { -+ .procname = "sched_domain", -+ .mode = 0555, -+ }, -+ {} -+}; -+ -+static struct ctl_table sd_ctl_root[] = { -+ { -+ .procname = "kernel", -+ .mode = 0555, -+ .child = sd_ctl_dir, -+ }, -+ {} -+}; -+ -+static struct ctl_table *sd_alloc_ctl_entry(int n) -+{ -+ struct ctl_table *entry = -+ kcalloc(n, sizeof(struct ctl_table), GFP_KERNEL); -+ -+ return entry; -+} -+ -+static void sd_free_ctl_entry(struct ctl_table **tablep) -+{ -+ struct ctl_table *entry; -+ -+ /* -+ * In the intermediate directories, both the child directory and -+ * procname are dynamically allocated and could fail but the mode -+ * will always be set. In the lowest directory the names are -+ * static strings and all have proc handlers. -+ */ -+ for (entry = *tablep; entry->mode; entry++) { -+ if (entry->child) -+ sd_free_ctl_entry(&entry->child); -+ if (entry->proc_handler == NULL) -+ kfree(entry->procname); -+ } -+ -+ kfree(*tablep); -+ *tablep = NULL; -+} -+ -+#define CPU_LOAD_IDX_MAX 5 -+static int min_load_idx = 0; -+static int max_load_idx = CPU_LOAD_IDX_MAX-1; -+ -+static void -+set_table_entry(struct ctl_table *entry, -+ const char *procname, void *data, int maxlen, -+ umode_t mode, proc_handler *proc_handler, -+ bool load_idx) -+{ -+ entry->procname = procname; -+ entry->data = data; -+ entry->maxlen = maxlen; -+ entry->mode = mode; -+ entry->proc_handler = proc_handler; -+ -+ if (load_idx) { -+ entry->extra1 = &min_load_idx; -+ entry->extra2 = &max_load_idx; -+ } -+} -+ -+static struct ctl_table * -+sd_alloc_ctl_domain_table(struct sched_domain *sd) -+{ -+ struct ctl_table *table = sd_alloc_ctl_entry(14); -+ -+ if (table == NULL) -+ return NULL; -+ -+ set_table_entry(&table[0], "min_interval", &sd->min_interval, -+ sizeof(long), 0644, proc_doulongvec_minmax, false); -+ set_table_entry(&table[1], "max_interval", &sd->max_interval, -+ sizeof(long), 0644, proc_doulongvec_minmax, false); -+ set_table_entry(&table[2], "busy_idx", &sd->busy_idx, -+ sizeof(int), 0644, proc_dointvec_minmax, true); -+ set_table_entry(&table[3], "idle_idx", &sd->idle_idx, -+ sizeof(int), 0644, proc_dointvec_minmax, true); -+ set_table_entry(&table[4], "newidle_idx", &sd->newidle_idx, -+ sizeof(int), 0644, proc_dointvec_minmax, true); -+ set_table_entry(&table[5], "wake_idx", &sd->wake_idx, -+ sizeof(int), 0644, proc_dointvec_minmax, true); -+ set_table_entry(&table[6], "forkexec_idx", &sd->forkexec_idx, -+ sizeof(int), 0644, proc_dointvec_minmax, true); -+ set_table_entry(&table[7], "busy_factor", &sd->busy_factor, -+ sizeof(int), 0644, proc_dointvec_minmax, false); -+ set_table_entry(&table[8], "imbalance_pct", &sd->imbalance_pct, -+ sizeof(int), 0644, proc_dointvec_minmax, false); -+ set_table_entry(&table[9], "cache_nice_tries", -+ &sd->cache_nice_tries, -+ sizeof(int), 0644, proc_dointvec_minmax, false); -+ set_table_entry(&table[10], "flags", &sd->flags, -+ sizeof(int), 0644, proc_dointvec_minmax, false); -+ set_table_entry(&table[11], "max_newidle_lb_cost", -+ &sd->max_newidle_lb_cost, -+ sizeof(long), 0644, proc_doulongvec_minmax, false); -+ set_table_entry(&table[12], "name", sd->name, -+ CORENAME_MAX_SIZE, 0444, proc_dostring, false); -+ /* &table[13] is terminator */ -+ -+ return table; -+} -+ -+static struct ctl_table *sd_alloc_ctl_cpu_table(int cpu) -+{ -+ struct ctl_table *entry, *table; -+ struct sched_domain *sd; -+ int domain_num = 0, i; -+ char buf[32]; -+ -+ for_each_domain(cpu, sd) -+ domain_num++; -+ entry = table = sd_alloc_ctl_entry(domain_num + 1); -+ if (table == NULL) -+ return NULL; -+ -+ i = 0; -+ for_each_domain(cpu, sd) { -+ snprintf(buf, 32, "domain%d", i); -+ entry->procname = kstrdup(buf, GFP_KERNEL); -+ entry->mode = 0555; -+ entry->child = sd_alloc_ctl_domain_table(sd); -+ entry++; -+ i++; -+ } -+ return table; -+} -+ -+static cpumask_var_t sd_sysctl_cpus; -+static struct ctl_table_header *sd_sysctl_header; -+ -+void register_sched_domain_sysctl(void) -+{ -+ static struct ctl_table *cpu_entries; -+ static struct ctl_table **cpu_idx; -+ char buf[32]; -+ int i; -+ -+ if (!cpu_entries) { -+ cpu_entries = sd_alloc_ctl_entry(num_possible_cpus() + 1); -+ if (!cpu_entries) -+ return; -+ -+ WARN_ON(sd_ctl_dir[0].child); -+ sd_ctl_dir[0].child = cpu_entries; -+ } -+ -+ if (!cpu_idx) { -+ struct ctl_table *e = cpu_entries; -+ -+ cpu_idx = kcalloc(nr_cpu_ids, sizeof(struct ctl_table*), GFP_KERNEL); -+ if (!cpu_idx) -+ return; -+ -+ /* deal with sparse possible map */ -+ for_each_possible_cpu(i) { -+ cpu_idx[i] = e; -+ e++; -+ } -+ } -+ -+ if (!cpumask_available(sd_sysctl_cpus)) { -+ if (!alloc_cpumask_var(&sd_sysctl_cpus, GFP_KERNEL)) -+ return; -+ -+ /* init to possible to not have holes in @cpu_entries */ -+ cpumask_copy(sd_sysctl_cpus, cpu_possible_mask); -+ } -+ -+ for_each_cpu(i, sd_sysctl_cpus) { -+ struct ctl_table *e = cpu_idx[i]; -+ -+ if (e->child) -+ sd_free_ctl_entry(&e->child); -+ -+ if (!e->procname) { -+ snprintf(buf, 32, "cpu%d", i); -+ e->procname = kstrdup(buf, GFP_KERNEL); -+ } -+ e->mode = 0555; -+ e->child = sd_alloc_ctl_cpu_table(i); -+ -+ __cpumask_clear_cpu(i, sd_sysctl_cpus); -+ } -+ -+ WARN_ON(sd_sysctl_header); -+ sd_sysctl_header = register_sysctl_table(sd_ctl_root); -+} -+ -+void dirty_sched_domain_sysctl(int cpu) -+{ -+ if (cpumask_available(sd_sysctl_cpus)) -+ __cpumask_set_cpu(cpu, sd_sysctl_cpus); -+} -+ -+/* may be called multiple times per register */ -+void unregister_sched_domain_sysctl(void) -+{ -+ unregister_sysctl_table(sd_sysctl_header); -+ sd_sysctl_header = NULL; -+} -+#endif /* CONFIG_SYSCTL */ -+ -+void set_rq_online(struct rq *rq) -+{ -+ if (!rq->online) { -+ cpumask_set_cpu(cpu_of(rq), rq->rd->online); -+ rq->online = true; -+ } -+} -+ -+void set_rq_offline(struct rq *rq) -+{ -+ if (rq->online) { -+ int cpu = cpu_of(rq); -+ -+ cpumask_clear_cpu(cpu, rq->rd->online); -+ rq->online = false; -+ clear_cpuidle_map(cpu); -+ } -+} -+ -+/* -+ * used to mark begin/end of suspend/resume: -+ */ -+static int num_cpus_frozen; -+ -+/* -+ * Update cpusets according to cpu_active mask. If cpusets are -+ * disabled, cpuset_update_active_cpus() becomes a simple wrapper -+ * around partition_sched_domains(). -+ * -+ * If we come here as part of a suspend/resume, don't touch cpusets because we -+ * want to restore it back to its original state upon resume anyway. -+ */ -+static void cpuset_cpu_active(void) -+{ -+ if (cpuhp_tasks_frozen) { -+ /* -+ * num_cpus_frozen tracks how many CPUs are involved in suspend -+ * resume sequence. As long as this is not the last online -+ * operation in the resume sequence, just build a single sched -+ * domain, ignoring cpusets. -+ */ -+ partition_sched_domains(1, NULL, NULL); -+ if (--num_cpus_frozen) -+ return; -+ /* -+ * This is the last CPU online operation. So fall through and -+ * restore the original sched domains by considering the -+ * cpuset configurations. -+ */ -+ cpuset_force_rebuild(); -+ } -+ -+ cpuset_update_active_cpus(); -+} -+ -+static int cpuset_cpu_inactive(unsigned int cpu) -+{ -+ if (!cpuhp_tasks_frozen) { -+ cpuset_update_active_cpus(); -+ } else { -+ num_cpus_frozen++; -+ partition_sched_domains(1, NULL, NULL); -+ } -+ return 0; -+} -+ -+int sched_cpu_activate(unsigned int cpu) -+{ -+ struct rq *rq = cpu_rq(cpu); -+ unsigned long flags; -+ -+ set_cpu_active(cpu, true); -+ -+ if (sched_smp_initialized) { -+ sched_domains_numa_masks_set(cpu); -+ cpuset_cpu_active(); -+ } -+ -+ /* -+ * Put the rq online, if not already. This happens: -+ * -+ * 1) In the early boot process, because we build the real domains -+ * after all CPUs have been brought up. -+ * -+ * 2) At runtime, if cpuset_cpu_active() fails to rebuild the -+ * domains. -+ */ -+ rq_lock_irqsave(rq, &flags); -+ if (rq->rd) { -+ BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span)); -+ set_rq_online(rq); -+ } -+ unbind_zero(cpu); -+ rq_unlock_irqrestore(rq, &flags); -+ -+ return 0; -+} -+ -+int sched_cpu_deactivate(unsigned int cpu) -+{ -+ int ret; -+ -+ set_cpu_active(cpu, false); -+ /* -+ * We've cleared cpu_active_mask, wait for all preempt-disabled and RCU -+ * users of this state to go away such that all new such users will -+ * observe it. -+ * -+ * Do sync before park smpboot threads to take care the rcu boost case. -+ */ -+ synchronize_rcu_mult(call_rcu, call_rcu_sched); -+ -+ if (!sched_smp_initialized) -+ return 0; -+ -+ ret = cpuset_cpu_inactive(cpu); -+ if (ret) { -+ set_cpu_active(cpu, true); -+ return ret; -+ } -+ sched_domains_numa_masks_clear(cpu); -+ return 0; -+} -+ -+int sched_cpu_starting(unsigned int __maybe_unused cpu) -+{ -+ return 0; -+} -+ -+#ifdef CONFIG_HOTPLUG_CPU -+int sched_cpu_dying(unsigned int cpu) -+{ -+ struct rq *rq = cpu_rq(cpu); -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ double_rq_lock(rq, cpu_rq(0)); -+ if (rq->rd) { -+ BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span)); -+ set_rq_offline(rq); -+ } -+ bind_zero(cpu); -+ double_rq_unlock(rq, cpu_rq(0)); -+ sched_start_tick(rq, cpu); -+ hrexpiry_clear(rq); -+ local_irq_restore(flags); -+ -+ return 0; -+} -+#endif -+ -+#if defined(CONFIG_SCHED_SMT) || defined(CONFIG_SCHED_MC) -+/* -+ * Cheaper version of the below functions in case support for SMT and MC is -+ * compiled in but CPUs have no siblings. -+ */ -+static bool sole_cpu_idle(struct rq *rq) -+{ -+ return rq_idle(rq); -+} -+#endif -+#ifdef CONFIG_SCHED_SMT -+static const cpumask_t *thread_cpumask(int cpu) -+{ -+ return topology_sibling_cpumask(cpu); -+} -+/* All this CPU's SMT siblings are idle */ -+static bool siblings_cpu_idle(struct rq *rq) -+{ -+ return cpumask_subset(&rq->thread_mask, &cpu_idle_map); -+} -+#endif -+#ifdef CONFIG_SCHED_MC -+static const cpumask_t *core_cpumask(int cpu) -+{ -+ return topology_core_cpumask(cpu); -+} -+/* All this CPU's shared cache siblings are idle */ -+static bool cache_cpu_idle(struct rq *rq) -+{ -+ return cpumask_subset(&rq->core_mask, &cpu_idle_map); -+} -+#endif -+ -+enum sched_domain_level { -+ SD_LV_NONE = 0, -+ SD_LV_SIBLING, -+ SD_LV_MC, -+ SD_LV_BOOK, -+ SD_LV_CPU, -+ SD_LV_NODE, -+ SD_LV_ALLNODES, -+ SD_LV_MAX -+}; -+ -+void __init sched_init_smp(void) -+{ -+ struct sched_domain *sd; -+ int cpu, other_cpu; -+#ifdef CONFIG_SCHED_SMT -+ bool smt_threads = false; -+#endif -+ cpumask_var_t non_isolated_cpus; -+ struct rq *rq; -+ -+ alloc_cpumask_var(&non_isolated_cpus, GFP_KERNEL); -+ -+ sched_init_numa(); -+ -+ /* -+ * There's no userspace yet to cause hotplug operations; hence all the -+ * cpu masks are stable and all blatant races in the below code cannot -+ * happen. -+ */ -+ mutex_lock(&sched_domains_mutex); -+ sched_init_domains(cpu_active_mask); -+ cpumask_andnot(non_isolated_cpus, cpu_possible_mask, cpu_isolated_map); -+ if (cpumask_empty(non_isolated_cpus)) -+ cpumask_set_cpu(smp_processor_id(), non_isolated_cpus); -+ mutex_unlock(&sched_domains_mutex); -+ -+ /* Move init over to a non-isolated CPU */ -+ if (set_cpus_allowed_ptr(current, non_isolated_cpus) < 0) -+ BUG(); -+ free_cpumask_var(non_isolated_cpus); -+ -+ mutex_lock(&sched_domains_mutex); -+ local_irq_disable(); -+ lock_all_rqs(); -+ /* -+ * Set up the relative cache distance of each online cpu from each -+ * other in a simple array for quick lookup. Locality is determined -+ * by the closest sched_domain that CPUs are separated by. CPUs with -+ * shared cache in SMT and MC are treated as local. Separate CPUs -+ * (within the same package or physically) within the same node are -+ * treated as not local. CPUs not even in the same domain (different -+ * nodes) are treated as very distant. -+ */ -+ for_each_online_cpu(cpu) { -+ rq = cpu_rq(cpu); -+ -+ /* First check if this cpu is in the same node */ -+ for_each_domain(cpu, sd) { -+ if (sd->level > SD_LV_MC) -+ continue; -+ /* Set locality to local node if not already found lower */ -+ for_each_cpu(other_cpu, sched_domain_span(sd)) { -+ if (rq->cpu_locality[other_cpu] > 3) -+ rq->cpu_locality[other_cpu] = 3; -+ } -+ } -+ -+ /* -+ * Each runqueue has its own function in case it doesn't have -+ * siblings of its own allowing mixed topologies. -+ */ -+#ifdef CONFIG_SCHED_MC -+ for_each_cpu(other_cpu, core_cpumask(cpu)) { -+ if (rq->cpu_locality[other_cpu] > 2) -+ rq->cpu_locality[other_cpu] = 2; -+ } -+ if (cpumask_weight(core_cpumask(cpu)) > 1) { -+ cpumask_copy(&rq->core_mask, core_cpumask(cpu)); -+ cpumask_clear_cpu(cpu, &rq->core_mask); -+ rq->cache_idle = cache_cpu_idle; -+ } -+#endif -+#ifdef CONFIG_SCHED_SMT -+ if (cpumask_weight(thread_cpumask(cpu)) > 1) { -+ cpumask_copy(&rq->thread_mask, thread_cpumask(cpu)); -+ cpumask_clear_cpu(cpu, &rq->thread_mask); -+ for_each_cpu(other_cpu, thread_cpumask(cpu)) -+ rq->cpu_locality[other_cpu] = 1; -+ rq->siblings_idle = siblings_cpu_idle; -+ smt_threads = true; -+ } -+#endif -+ } -+ for_each_possible_cpu(cpu) { -+ int total_cpus = 1, locality; -+ -+ rq = cpu_rq(cpu); -+ for (locality = 1; locality <= 4; locality++) { -+ for_each_possible_cpu(other_cpu) { -+ if (rq->cpu_locality[other_cpu] == locality) -+ rq->rq_order[total_cpus++] = cpu_rq(other_cpu); -+ } -+ } -+ } -+#ifdef CONFIG_SMT_NICE -+ if (smt_threads) { -+ check_siblings = &check_smt_siblings; -+ wake_siblings = &wake_smt_siblings; -+ smt_schedule = &smt_should_schedule; -+ } -+#endif -+ unlock_all_rqs(); -+ local_irq_enable(); -+ mutex_unlock(&sched_domains_mutex); -+ -+ for_each_online_cpu(cpu) { -+ rq = cpu_rq(cpu); -+ -+ for_each_online_cpu(other_cpu) { -+ if (other_cpu <= cpu) -+ continue; -+ printk(KERN_DEBUG "MuQSS locality CPU %d to %d: %d\n", cpu, other_cpu, rq->cpu_locality[other_cpu]); -+ } -+ } -+ -+ sched_smp_initialized = true; -+} -+#else -+void __init sched_init_smp(void) -+{ -+ sched_smp_initialized = true; -+} -+#endif /* CONFIG_SMP */ -+ -+int in_sched_functions(unsigned long addr) -+{ -+ return in_lock_functions(addr) || -+ (addr >= (unsigned long)__sched_text_start -+ && addr < (unsigned long)__sched_text_end); -+} -+ -+#ifdef CONFIG_CGROUP_SCHED -+/* task group related information */ -+struct task_group { -+ struct cgroup_subsys_state css; -+ -+ struct rcu_head rcu; -+ struct list_head list; -+ -+ struct task_group *parent; -+ struct list_head siblings; -+ struct list_head children; -+}; -+ -+/* -+ * Default task group. -+ * Every task in system belongs to this group at bootup. -+ */ -+struct task_group root_task_group; -+LIST_HEAD(task_groups); -+ -+/* Cacheline aligned slab cache for task_group */ -+static struct kmem_cache *task_group_cache __read_mostly; -+#endif /* CONFIG_CGROUP_SCHED */ -+ -+void __init sched_init(void) -+{ -+#ifdef CONFIG_SMP -+ int cpu_ids; -+#endif -+ int i; -+ struct rq *rq; -+ -+ sched_clock_init(); -+ -+ wait_bit_init(); -+ -+ prio_ratios[0] = 128; -+ for (i = 1 ; i < NICE_WIDTH ; i++) -+ prio_ratios[i] = prio_ratios[i - 1] * 11 / 10; -+ -+ skiplist_node_init(&init_task.node); -+ -+#ifdef CONFIG_SMP -+ init_defrootdomain(); -+ cpumask_clear(&cpu_idle_map); -+#else -+ uprq = &per_cpu(runqueues, 0); -+#endif -+ -+#ifdef CONFIG_CGROUP_SCHED -+ task_group_cache = KMEM_CACHE(task_group, 0); -+ -+ list_add(&root_task_group.list, &task_groups); -+ INIT_LIST_HEAD(&root_task_group.children); -+ INIT_LIST_HEAD(&root_task_group.siblings); -+#endif /* CONFIG_CGROUP_SCHED */ -+ for_each_possible_cpu(i) { -+ rq = cpu_rq(i); -+ skiplist_init(&rq->node); -+ rq->sl = new_skiplist(&rq->node); -+ raw_spin_lock_init(&rq->lock); -+ rq->nr_running = 0; -+ rq->nr_uninterruptible = 0; -+ rq->nr_switches = 0; -+ rq->clock = rq->old_clock = rq->last_niffy = rq->niffies = 0; -+ rq->last_jiffy = jiffies; -+ rq->user_ns = rq->nice_ns = rq->softirq_ns = rq->system_ns = -+ rq->iowait_ns = rq->idle_ns = 0; -+ rq->dither = 0; -+ set_rq_task(rq, &init_task); -+ rq->iso_ticks = 0; -+ rq->iso_refractory = false; -+#ifdef CONFIG_SMP -+ rq->sd = NULL; -+ rq->rd = NULL; -+ rq->online = false; -+ rq->cpu = i; -+ rq_attach_root(rq, &def_root_domain); -+#endif -+ init_rq_hrexpiry(rq); -+ atomic_set(&rq->nr_iowait, 0); -+ } -+ -+#ifdef CONFIG_SMP -+ cpu_ids = i; -+ /* -+ * Set the base locality for cpu cache distance calculation to -+ * "distant" (3). Make sure the distance from a CPU to itself is 0. -+ */ -+ for_each_possible_cpu(i) { -+ int j; -+ -+ rq = cpu_rq(i); -+#ifdef CONFIG_SCHED_SMT -+ rq->siblings_idle = sole_cpu_idle; -+#endif -+#ifdef CONFIG_SCHED_MC -+ rq->cache_idle = sole_cpu_idle; -+#endif -+ rq->cpu_locality = kmalloc(cpu_ids * sizeof(int *), GFP_ATOMIC); -+ for_each_possible_cpu(j) { -+ if (i == j) -+ rq->cpu_locality[j] = 0; -+ else -+ rq->cpu_locality[j] = 4; -+ } -+ rq->rq_order = kmalloc(cpu_ids * sizeof(struct rq *), GFP_ATOMIC); -+ rq->rq_order[0] = rq; -+ for (j = 1; j < cpu_ids; j++) -+ rq->rq_order[j] = cpu_rq(j); -+ } -+#endif -+ -+ /* -+ * The boot idle thread does lazy MMU switching as well: -+ */ -+ mmgrab(&init_mm); -+ enter_lazy_tlb(&init_mm, current); -+ -+ /* -+ * Make us the idle thread. Technically, schedule() should not be -+ * called from this thread, however somewhere below it might be, -+ * but because we are the idle thread, we just pick up running again -+ * when this runqueue becomes "idle". -+ */ -+ init_idle(current, smp_processor_id()); -+ -+#ifdef CONFIG_SMP -+ /* May be allocated at isolcpus cmdline parse time */ -+ if (cpu_isolated_map == NULL) -+ zalloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT); -+ idle_thread_set_boot_cpu(); -+#endif /* SMP */ -+ -+ init_schedstats(); -+} -+ -+#ifdef CONFIG_DEBUG_ATOMIC_SLEEP -+static inline int preempt_count_equals(int preempt_offset) -+{ -+ int nested = preempt_count() + rcu_preempt_depth(); -+ -+ return (nested == preempt_offset); -+} -+ -+void __might_sleep(const char *file, int line, int preempt_offset) -+{ -+ /* -+ * Blocking primitives will set (and therefore destroy) current->state, -+ * since we will exit with TASK_RUNNING make sure we enter with it, -+ * otherwise we will destroy state. -+ */ -+ WARN_ONCE(current->state != TASK_RUNNING && current->task_state_change, -+ "do not call blocking ops when !TASK_RUNNING; " -+ "state=%lx set at [<%p>] %pS\n", -+ current->state, -+ (void *)current->task_state_change, -+ (void *)current->task_state_change); -+ -+ ___might_sleep(file, line, preempt_offset); -+} -+EXPORT_SYMBOL(__might_sleep); -+ -+void ___might_sleep(const char *file, int line, int preempt_offset) -+{ -+ /* Ratelimiting timestamp: */ -+ static unsigned long prev_jiffy; -+ -+ unsigned long preempt_disable_ip; -+ -+ /* WARN_ON_ONCE() by default, no rate limit required: */ -+ rcu_sleep_check(); -+ -+ if ((preempt_count_equals(preempt_offset) && !irqs_disabled() && -+ !is_idle_task(current)) || -+ system_state == SYSTEM_BOOTING || system_state > SYSTEM_RUNNING || -+ oops_in_progress) -+ return; -+ -+ if (time_before(jiffies, prev_jiffy + HZ) && prev_jiffy) -+ return; -+ prev_jiffy = jiffies; -+ -+ /* Save this before calling printk(), since that will clobber it: */ -+ preempt_disable_ip = get_preempt_disable_ip(current); -+ -+ printk(KERN_ERR -+ "BUG: sleeping function called from invalid context at %s:%d\n", -+ file, line); -+ printk(KERN_ERR -+ "in_atomic(): %d, irqs_disabled(): %d, pid: %d, name: %s\n", -+ in_atomic(), irqs_disabled(), -+ current->pid, current->comm); -+ -+ if (task_stack_end_corrupted(current)) -+ printk(KERN_EMERG "Thread overran stack, or stack corrupted\n"); -+ -+ debug_show_held_locks(current); -+ if (irqs_disabled()) -+ print_irqtrace_events(current); -+ if (IS_ENABLED(CONFIG_DEBUG_PREEMPT) -+ && !preempt_count_equals(preempt_offset)) { -+ pr_err("Preemption disabled at:"); -+ print_ip_sym(preempt_disable_ip); -+ pr_cont("\n"); -+ } -+ dump_stack(); -+ add_taint(TAINT_WARN, LOCKDEP_STILL_OK); -+} -+EXPORT_SYMBOL(___might_sleep); -+#endif -+ -+#ifdef CONFIG_MAGIC_SYSRQ -+static inline void normalise_rt_tasks(void) -+{ -+ struct task_struct *g, *p; -+ unsigned long flags; -+ struct rq *rq; -+ -+ read_lock(&tasklist_lock); -+ for_each_process_thread(g, p) { -+ /* -+ * Only normalize user tasks: -+ */ -+ if (p->flags & PF_KTHREAD) -+ continue; -+ -+ if (!rt_task(p) && !iso_task(p)) -+ continue; -+ -+ rq = task_rq_lock(p, &flags); -+ __setscheduler(p, rq, SCHED_NORMAL, 0, false); -+ task_rq_unlock(rq, p, &flags); -+ } -+ read_unlock(&tasklist_lock); -+} -+ -+void normalize_rt_tasks(void) -+{ -+ normalise_rt_tasks(); -+} -+#endif /* CONFIG_MAGIC_SYSRQ */ -+ -+#if defined(CONFIG_IA64) || defined(CONFIG_KGDB_KDB) -+/* -+ * These functions are only useful for the IA64 MCA handling, or kdb. -+ * -+ * They can only be called when the whole system has been -+ * stopped - every CPU needs to be quiescent, and no scheduling -+ * activity can take place. Using them for anything else would -+ * be a serious bug, and as a result, they aren't even visible -+ * under any other configuration. -+ */ -+ -+/** -+ * curr_task - return the current task for a given CPU. -+ * @cpu: the processor in question. -+ * -+ * ONLY VALID WHEN THE WHOLE SYSTEM IS STOPPED! -+ * -+ * Return: The current task for @cpu. -+ */ -+struct task_struct *curr_task(int cpu) -+{ -+ return cpu_curr(cpu); -+} -+ -+#endif /* defined(CONFIG_IA64) || defined(CONFIG_KGDB_KDB) */ -+ -+#ifdef CONFIG_IA64 -+/** -+ * set_curr_task - set the current task for a given CPU. -+ * @cpu: the processor in question. -+ * @p: the task pointer to set. -+ * -+ * Description: This function must only be used when non-maskable interrupts -+ * are serviced on a separate stack. It allows the architecture to switch the -+ * notion of the current task on a CPU in a non-blocking manner. This function -+ * must be called with all CPU's synchronised, and interrupts disabled, the -+ * and caller must save the original value of the current task (see -+ * curr_task() above) and restore that value before reenabling interrupts and -+ * re-starting the system. -+ * -+ * ONLY VALID WHEN THE WHOLE SYSTEM IS STOPPED! -+ */ -+void ia64_set_curr_task(int cpu, struct task_struct *p) -+{ -+ cpu_curr(cpu) = p; -+} -+ -+#endif -+ -+void init_idle_bootup_task(struct task_struct *idle) -+{} -+ -+#ifdef CONFIG_SCHED_DEBUG -+__read_mostly bool sched_debug_enabled; -+ -+void proc_sched_show_task(struct task_struct *p, struct pid_namespace *ns, -+ struct seq_file *m) -+{} -+ -+void proc_sched_set_task(struct task_struct *p) -+{} -+#endif -+ -+#ifdef CONFIG_SMP -+#define SCHED_LOAD_SHIFT (10) -+#define SCHED_LOAD_SCALE (1L << SCHED_LOAD_SHIFT) -+ -+unsigned long default_scale_freq_power(struct sched_domain *sd, int cpu) -+{ -+ return SCHED_LOAD_SCALE; -+} -+ -+unsigned long default_scale_smt_power(struct sched_domain *sd, int cpu) -+{ -+ unsigned long weight = cpumask_weight(sched_domain_span(sd)); -+ unsigned long smt_gain = sd->smt_gain; -+ -+ smt_gain /= weight; -+ -+ return smt_gain; -+} -+#endif -+ -+#ifdef CONFIG_CGROUP_SCHED -+static void sched_free_group(struct task_group *tg) -+{ -+ kmem_cache_free(task_group_cache, tg); -+} -+ -+/* allocate runqueue etc for a new task group */ -+struct task_group *sched_create_group(struct task_group *parent) -+{ -+ struct task_group *tg; -+ -+ tg = kmem_cache_alloc(task_group_cache, GFP_KERNEL | __GFP_ZERO); -+ if (!tg) -+ return ERR_PTR(-ENOMEM); -+ -+ return tg; -+} -+ -+void sched_online_group(struct task_group *tg, struct task_group *parent) -+{ -+} -+ -+/* rcu callback to free various structures associated with a task group */ -+static void sched_free_group_rcu(struct rcu_head *rhp) -+{ -+ /* Now it should be safe to free those cfs_rqs */ -+ sched_free_group(container_of(rhp, struct task_group, rcu)); -+} -+ -+void sched_destroy_group(struct task_group *tg) -+{ -+ /* Wait for possible concurrent references to cfs_rqs complete */ -+ call_rcu(&tg->rcu, sched_free_group_rcu); -+} -+ -+void sched_offline_group(struct task_group *tg) -+{ -+} -+ -+static inline struct task_group *css_tg(struct cgroup_subsys_state *css) -+{ -+ return css ? container_of(css, struct task_group, css) : NULL; -+} -+ -+static struct cgroup_subsys_state * -+cpu_cgroup_css_alloc(struct cgroup_subsys_state *parent_css) -+{ -+ struct task_group *parent = css_tg(parent_css); -+ struct task_group *tg; -+ -+ if (!parent) { -+ /* This is early initialization for the top cgroup */ -+ return &root_task_group.css; -+ } -+ -+ tg = sched_create_group(parent); -+ if (IS_ERR(tg)) -+ return ERR_PTR(-ENOMEM); -+ return &tg->css; -+} -+ -+/* Expose task group only after completing cgroup initialization */ -+static int cpu_cgroup_css_online(struct cgroup_subsys_state *css) -+{ -+ struct task_group *tg = css_tg(css); -+ struct task_group *parent = css_tg(css->parent); -+ -+ if (parent) -+ sched_online_group(tg, parent); -+ return 0; -+} -+ -+static void cpu_cgroup_css_released(struct cgroup_subsys_state *css) -+{ -+ struct task_group *tg = css_tg(css); -+ -+ sched_offline_group(tg); -+} -+ -+static void cpu_cgroup_css_free(struct cgroup_subsys_state *css) -+{ -+ struct task_group *tg = css_tg(css); -+ -+ /* -+ * Relies on the RCU grace period between css_released() and this. -+ */ -+ sched_free_group(tg); -+} -+ -+static void cpu_cgroup_fork(struct task_struct *task) -+{ -+} -+ -+static int cpu_cgroup_can_attach(struct cgroup_taskset *tset) -+{ -+ return 0; -+} -+ -+static void cpu_cgroup_attach(struct cgroup_taskset *tset) -+{ -+} -+ -+static struct cftype cpu_files[] = { -+ { } /* Terminate */ -+}; -+ -+struct cgroup_subsys cpu_cgrp_subsys = { -+ .css_alloc = cpu_cgroup_css_alloc, -+ .css_online = cpu_cgroup_css_online, -+ .css_released = cpu_cgroup_css_released, -+ .css_free = cpu_cgroup_css_free, -+ .fork = cpu_cgroup_fork, -+ .can_attach = cpu_cgroup_can_attach, -+ .attach = cpu_cgroup_attach, -+ .legacy_cftypes = cpu_files, -+ .early_init = true, -+}; -+#endif /* CONFIG_CGROUP_SCHED */ -diff -Nur a/kernel/sched/MuQSS.h b/kernel/sched/MuQSS.h ---- a/kernel/sched/MuQSS.h 1970-01-01 01:00:00.000000000 +0100 -+++ b/kernel/sched/MuQSS.h 2019-01-05 20:22:51.099998516 +0000 -@@ -0,0 +1,725 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_PARAVIRT -+#include -+#endif -+ -+#include "cpuacct.h" -+ -+#ifndef MUQSS_SCHED_H -+#define MUQSS_SCHED_H -+ -+#ifdef CONFIG_SCHED_DEBUG -+# define SCHED_WARN_ON(x) WARN_ONCE(x, #x) -+#else -+# define SCHED_WARN_ON(x) ((void)(x)) -+#endif -+ -+/* task_struct::on_rq states: */ -+#define TASK_ON_RQ_QUEUED 1 -+#define TASK_ON_RQ_MIGRATING 2 -+ -+struct rq; -+ -+#ifdef CONFIG_SMP -+ -+static inline bool sched_asym_prefer(int a, int b) -+{ -+ return arch_asym_cpu_priority(a) > arch_asym_cpu_priority(b); -+} -+ -+/* -+ * We add the notion of a root-domain which will be used to define per-domain -+ * variables. Each exclusive cpuset essentially defines an island domain by -+ * fully partitioning the member cpus from any other cpuset. Whenever a new -+ * exclusive cpuset is created, we also create and attach a new root-domain -+ * object. -+ * -+ */ -+struct root_domain { -+ atomic_t refcount; -+ atomic_t rto_count; -+ struct rcu_head rcu; -+ cpumask_var_t span; -+ cpumask_var_t online; -+ -+ /* Indicate more than one runnable task for any CPU */ -+ bool overload; -+ -+ /* -+ * The bit corresponding to a CPU gets set here if such CPU has more -+ * than one runnable -deadline task (as it is below for RT tasks). -+ */ -+ cpumask_var_t dlo_mask; -+ atomic_t dlo_count; -+ /* Replace unused CFS structures with void */ -+ //struct dl_bw dl_bw; -+ //struct cpudl cpudl; -+ void *dl_bw; -+ void *cpudl; -+ -+ /* -+ * The "RT overload" flag: it gets set if a CPU has more than -+ * one runnable RT task. -+ */ -+ cpumask_var_t rto_mask; -+ //struct cpupri cpupri; -+ void *cpupri; -+ -+ unsigned long max_cpu_capacity; -+}; -+ -+extern struct root_domain def_root_domain; -+extern struct mutex sched_domains_mutex; -+ -+extern void init_defrootdomain(void); -+extern int sched_init_domains(const struct cpumask *cpu_map); -+extern void rq_attach_root(struct rq *rq, struct root_domain *rd); -+ -+static inline void cpupri_cleanup(void __maybe_unused *cpupri) -+{ -+} -+ -+static inline void cpudl_cleanup(void __maybe_unused *cpudl) -+{ -+} -+ -+static inline void init_dl_bw(void __maybe_unused *dl_bw) -+{ -+} -+ -+static inline int cpudl_init(void __maybe_unused *dl_bw) -+{ -+ return 0; -+} -+ -+static inline int cpupri_init(void __maybe_unused *cpupri) -+{ -+ return 0; -+} -+#endif /* CONFIG_SMP */ -+ -+/* -+ * This is the main, per-CPU runqueue data structure. -+ * This data should only be modified by the local cpu. -+ */ -+struct rq { -+ raw_spinlock_t lock; -+ -+ struct task_struct *curr, *idle, *stop; -+ struct mm_struct *prev_mm; -+ -+ unsigned int nr_running; -+ /* -+ * This is part of a global counter where only the total sum -+ * over all CPUs matters. A task can increase this counter on -+ * one CPU and if it got migrated afterwards it may decrease -+ * it on another CPU. Always updated under the runqueue lock: -+ */ -+ unsigned long nr_uninterruptible; -+ u64 nr_switches; -+ -+ /* Stored data about rq->curr to work outside rq lock */ -+ u64 rq_deadline; -+ int rq_prio; -+ -+ /* Best queued id for use outside lock */ -+ u64 best_key; -+ -+ unsigned long last_scheduler_tick; /* Last jiffy this RQ ticked */ -+ unsigned long last_jiffy; /* Last jiffy this RQ updated rq clock */ -+ u64 niffies; /* Last time this RQ updated rq clock */ -+ u64 last_niffy; /* Last niffies as updated by local clock */ -+ u64 last_jiffy_niffies; /* Niffies @ last_jiffy */ -+ -+ u64 load_update; /* When we last updated load */ -+ unsigned long load_avg; /* Rolling load average */ -+#ifdef CONFIG_SMT_NICE -+ struct mm_struct *rq_mm; -+ int rq_smt_bias; /* Policy/nice level bias across smt siblings */ -+#endif -+ /* Accurate timekeeping data */ -+ unsigned long user_ns, nice_ns, irq_ns, softirq_ns, system_ns, -+ iowait_ns, idle_ns; -+ atomic_t nr_iowait; -+ -+ skiplist_node node; -+ skiplist *sl; -+#ifdef CONFIG_SMP -+ struct task_struct *preempt; /* Preempt triggered on this task */ -+ struct task_struct *preempting; /* Hint only, what task is preempting */ -+ -+ int cpu; /* cpu of this runqueue */ -+ bool online; -+ -+ struct root_domain *rd; -+ struct sched_domain *sd; -+ -+ unsigned long cpu_capacity_orig; -+ -+ int *cpu_locality; /* CPU relative cache distance */ -+ struct rq **rq_order; /* RQs ordered by relative cache distance */ -+ -+#ifdef CONFIG_SCHED_SMT -+ cpumask_t thread_mask; -+ bool (*siblings_idle)(struct rq *rq); -+ /* See if all smt siblings are idle */ -+#endif /* CONFIG_SCHED_SMT */ -+#ifdef CONFIG_SCHED_MC -+ cpumask_t core_mask; -+ bool (*cache_idle)(struct rq *rq); -+ /* See if all cache siblings are idle */ -+#endif /* CONFIG_SCHED_MC */ -+#endif /* CONFIG_SMP */ -+#ifdef CONFIG_IRQ_TIME_ACCOUNTING -+ u64 prev_irq_time; -+#endif /* CONFIG_IRQ_TIME_ACCOUNTING */ -+#ifdef CONFIG_PARAVIRT -+ u64 prev_steal_time; -+#endif /* CONFIG_PARAVIRT */ -+#ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING -+ u64 prev_steal_time_rq; -+#endif /* CONFIG_PARAVIRT_TIME_ACCOUNTING */ -+ -+ u64 clock, old_clock, last_tick; -+ u64 clock_task; -+ int dither; -+ -+ int iso_ticks; -+ bool iso_refractory; -+ -+#ifdef CONFIG_HIGH_RES_TIMERS -+ struct hrtimer hrexpiry_timer; -+#endif -+ -+#ifdef CONFIG_SCHEDSTATS -+ -+ /* latency stats */ -+ struct sched_info rq_sched_info; -+ unsigned long long rq_cpu_time; -+ /* could above be rq->cfs_rq.exec_clock + rq->rt_rq.rt_runtime ? */ -+ -+ /* sys_sched_yield() stats */ -+ unsigned int yld_count; -+ -+ /* schedule() stats */ -+ unsigned int sched_switch; -+ unsigned int sched_count; -+ unsigned int sched_goidle; -+ -+ /* try_to_wake_up() stats */ -+ unsigned int ttwu_count; -+ unsigned int ttwu_local; -+#endif /* CONFIG_SCHEDSTATS */ -+ -+#ifdef CONFIG_SMP -+ struct llist_head wake_list; -+#endif -+ -+#ifdef CONFIG_CPU_IDLE -+ /* Must be inspected within a rcu lock section */ -+ struct cpuidle_state *idle_state; -+#endif -+}; -+ -+#ifdef CONFIG_SMP -+struct rq *cpu_rq(int cpu); -+#endif -+ -+#ifndef CONFIG_SMP -+extern struct rq *uprq; -+#define cpu_rq(cpu) (uprq) -+#define this_rq() (uprq) -+#define raw_rq() (uprq) -+#define task_rq(p) (uprq) -+#define cpu_curr(cpu) ((uprq)->curr) -+#else /* CONFIG_SMP */ -+DECLARE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues); -+#define this_rq() this_cpu_ptr(&runqueues) -+#define raw_rq() raw_cpu_ptr(&runqueues) -+#define task_rq(p) cpu_rq(task_cpu(p)) -+#endif /* CONFIG_SMP */ -+ -+static inline int task_current(struct rq *rq, struct task_struct *p) -+{ -+ return rq->curr == p; -+} -+ -+static inline int task_running(struct rq *rq, struct task_struct *p) -+{ -+#ifdef CONFIG_SMP -+ return p->on_cpu; -+#else -+ return task_current(rq, p); -+#endif -+} -+ -+static inline void rq_lock(struct rq *rq) -+ __acquires(rq->lock) -+{ -+ raw_spin_lock(&rq->lock); -+} -+ -+static inline void rq_unlock(struct rq *rq) -+ __releases(rq->lock) -+{ -+ raw_spin_unlock(&rq->lock); -+} -+ -+static inline void rq_lock_irq(struct rq *rq) -+ __acquires(rq->lock) -+{ -+ raw_spin_lock_irq(&rq->lock); -+} -+ -+static inline void rq_unlock_irq(struct rq *rq) -+ __releases(rq->lock) -+{ -+ raw_spin_unlock_irq(&rq->lock); -+} -+ -+static inline void rq_lock_irqsave(struct rq *rq, unsigned long *flags) -+ __acquires(rq->lock) -+{ -+ raw_spin_lock_irqsave(&rq->lock, *flags); -+} -+ -+static inline void rq_unlock_irqrestore(struct rq *rq, unsigned long *flags) -+ __releases(rq->lock) -+{ -+ raw_spin_unlock_irqrestore(&rq->lock, *flags); -+} -+ -+static inline struct rq *task_rq_lock(struct task_struct *p, unsigned long *flags) -+ __acquires(p->pi_lock) -+ __acquires(rq->lock) -+{ -+ struct rq *rq; -+ -+ while (42) { -+ raw_spin_lock_irqsave(&p->pi_lock, *flags); -+ rq = task_rq(p); -+ raw_spin_lock(&rq->lock); -+ if (likely(rq == task_rq(p))) -+ break; -+ raw_spin_unlock(&rq->lock); -+ raw_spin_unlock_irqrestore(&p->pi_lock, *flags); -+ } -+ return rq; -+} -+ -+static inline void task_rq_unlock(struct rq *rq, struct task_struct *p, unsigned long *flags) -+ __releases(rq->lock) -+ __releases(p->pi_lock) -+{ -+ rq_unlock(rq); -+ raw_spin_unlock_irqrestore(&p->pi_lock, *flags); -+} -+ -+static inline struct rq *__task_rq_lock(struct task_struct *p) -+ __acquires(rq->lock) -+{ -+ struct rq *rq; -+ -+ lockdep_assert_held(&p->pi_lock); -+ -+ while (42) { -+ rq = task_rq(p); -+ raw_spin_lock(&rq->lock); -+ if (likely(rq == task_rq(p))) -+ break; -+ raw_spin_unlock(&rq->lock); -+ } -+ return rq; -+} -+ -+static inline void __task_rq_unlock(struct rq *rq) -+{ -+ rq_unlock(rq); -+} -+ -+/* -+ * {de,en}queue flags: Most not used on MuQSS. -+ * -+ * DEQUEUE_SLEEP - task is no longer runnable -+ * ENQUEUE_WAKEUP - task just became runnable -+ * -+ * SAVE/RESTORE - an otherwise spurious dequeue/enqueue, done to ensure tasks -+ * are in a known state which allows modification. Such pairs -+ * should preserve as much state as possible. -+ * -+ * MOVE - paired with SAVE/RESTORE, explicitly does not preserve the location -+ * in the runqueue. -+ * -+ * ENQUEUE_HEAD - place at front of runqueue (tail if not specified) -+ * ENQUEUE_REPLENISH - CBS (replenish runtime and postpone deadline) -+ * ENQUEUE_MIGRATED - the task was migrated during wakeup -+ * -+ */ -+ -+#define DEQUEUE_SAVE 0x02 /* matches ENQUEUE_RESTORE */ -+ -+#define ENQUEUE_RESTORE 0x02 -+ -+static inline u64 __rq_clock_broken(struct rq *rq) -+{ -+ return READ_ONCE(rq->clock); -+} -+ -+static inline u64 rq_clock(struct rq *rq) -+{ -+ lockdep_assert_held(&rq->lock); -+ -+ return rq->clock; -+} -+ -+static inline u64 rq_clock_task(struct rq *rq) -+{ -+ lockdep_assert_held(&rq->lock); -+ -+ return rq->clock_task; -+} -+ -+#ifdef CONFIG_NUMA -+enum numa_topology_type { -+ NUMA_DIRECT, -+ NUMA_GLUELESS_MESH, -+ NUMA_BACKPLANE, -+}; -+extern enum numa_topology_type sched_numa_topology_type; -+extern int sched_max_numa_distance; -+extern bool find_numa_distance(int distance); -+ -+extern void sched_init_numa(void); -+extern void sched_domains_numa_masks_set(unsigned int cpu); -+extern void sched_domains_numa_masks_clear(unsigned int cpu); -+#else -+static inline void sched_init_numa(void) { } -+static inline void sched_domains_numa_masks_set(unsigned int cpu) { } -+static inline void sched_domains_numa_masks_clear(unsigned int cpu) { } -+#endif -+ -+extern struct mutex sched_domains_mutex; -+extern struct static_key_false sched_schedstats; -+ -+#define rcu_dereference_check_sched_domain(p) \ -+ rcu_dereference_check((p), \ -+ lockdep_is_held(&sched_domains_mutex)) -+ -+#ifdef CONFIG_SMP -+ -+/* -+ * The domain tree (rq->sd) is protected by RCU's quiescent state transition. -+ * See detach_destroy_domains: synchronize_sched for details. -+ * -+ * The domain tree of any CPU may only be accessed from within -+ * preempt-disabled sections. -+ */ -+#define for_each_domain(cpu, __sd) \ -+ for (__sd = rcu_dereference_check_sched_domain(cpu_rq(cpu)->sd); \ -+ __sd; __sd = __sd->parent) -+ -+#define for_each_lower_domain(sd) for (; sd; sd = sd->child) -+ -+/** -+ * highest_flag_domain - Return highest sched_domain containing flag. -+ * @cpu: The cpu whose highest level of sched domain is to -+ * be returned. -+ * @flag: The flag to check for the highest sched_domain -+ * for the given cpu. -+ * -+ * Returns the highest sched_domain of a cpu which contains the given flag. -+ */ -+static inline struct sched_domain *highest_flag_domain(int cpu, int flag) -+{ -+ struct sched_domain *sd, *hsd = NULL; -+ -+ for_each_domain(cpu, sd) { -+ if (!(sd->flags & flag)) -+ break; -+ hsd = sd; -+ } -+ -+ return hsd; -+} -+ -+static inline struct sched_domain *lowest_flag_domain(int cpu, int flag) -+{ -+ struct sched_domain *sd; -+ -+ for_each_domain(cpu, sd) { -+ if (sd->flags & flag) -+ break; -+ } -+ -+ return sd; -+} -+ -+DECLARE_PER_CPU(struct sched_domain *, sd_llc); -+DECLARE_PER_CPU(int, sd_llc_size); -+DECLARE_PER_CPU(int, sd_llc_id); -+DECLARE_PER_CPU(struct sched_domain_shared *, sd_llc_shared); -+DECLARE_PER_CPU(struct sched_domain *, sd_numa); -+DECLARE_PER_CPU(struct sched_domain *, sd_asym); -+ -+struct sched_group_capacity { -+ atomic_t ref; -+ /* -+ * CPU capacity of this group, SCHED_CAPACITY_SCALE being max capacity -+ * for a single CPU. -+ */ -+ unsigned long capacity; -+ unsigned long min_capacity; /* Min per-CPU capacity in group */ -+ unsigned long next_update; -+ int imbalance; /* XXX unrelated to capacity but shared group state */ -+ -+#ifdef CONFIG_SCHED_DEBUG -+ int id; -+#endif -+ -+ unsigned long cpumask[0]; /* balance mask */ -+}; -+ -+struct sched_group { -+ struct sched_group *next; /* Must be a circular list */ -+ atomic_t ref; -+ -+ unsigned int group_weight; -+ struct sched_group_capacity *sgc; -+ int asym_prefer_cpu; /* cpu of highest priority in group */ -+ -+ /* -+ * The CPUs this group covers. -+ * -+ * NOTE: this field is variable length. (Allocated dynamically -+ * by attaching extra space to the end of the structure, -+ * depending on how many CPUs the kernel has booted up with) -+ */ -+ unsigned long cpumask[0]; -+}; -+ -+static inline struct cpumask *sched_group_span(struct sched_group *sg) -+{ -+ return to_cpumask(sg->cpumask); -+} -+ -+/* -+ * See build_balance_mask(). -+ */ -+static inline struct cpumask *group_balance_mask(struct sched_group *sg) -+{ -+ return to_cpumask(sg->sgc->cpumask); -+} -+ -+/** -+ * group_first_cpu - Returns the first cpu in the cpumask of a sched_group. -+ * @group: The group whose first cpu is to be returned. -+ */ -+static inline unsigned int group_first_cpu(struct sched_group *group) -+{ -+ return cpumask_first(sched_group_span(group)); -+} -+ -+ -+#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SYSCTL) -+void register_sched_domain_sysctl(void); -+void dirty_sched_domain_sysctl(int cpu); -+void unregister_sched_domain_sysctl(void); -+#else -+static inline void register_sched_domain_sysctl(void) -+{ -+} -+static inline void dirty_sched_domain_sysctl(int cpu) -+{ -+} -+static inline void unregister_sched_domain_sysctl(void) -+{ -+} -+#endif -+ -+extern void sched_ttwu_pending(void); -+extern void set_cpus_allowed_common(struct task_struct *p, const struct cpumask *new_mask); -+extern void set_rq_online (struct rq *rq); -+extern void set_rq_offline(struct rq *rq); -+extern bool sched_smp_initialized; -+ -+static inline void update_group_capacity(struct sched_domain *sd, int cpu) -+{ -+} -+ -+static inline void trigger_load_balance(struct rq *rq) -+{ -+} -+ -+#define sched_feat(x) 0 -+ -+#else /* CONFIG_SMP */ -+ -+static inline void sched_ttwu_pending(void) { } -+ -+#endif /* CONFIG_SMP */ -+ -+#ifdef CONFIG_CPU_IDLE -+static inline void idle_set_state(struct rq *rq, -+ struct cpuidle_state *idle_state) -+{ -+ rq->idle_state = idle_state; -+} -+ -+static inline struct cpuidle_state *idle_get_state(struct rq *rq) -+{ -+ SCHED_WARN_ON(!rcu_read_lock_held()); -+ return rq->idle_state; -+} -+#else -+static inline void idle_set_state(struct rq *rq, -+ struct cpuidle_state *idle_state) -+{ -+} -+ -+static inline struct cpuidle_state *idle_get_state(struct rq *rq) -+{ -+ return NULL; -+} -+#endif -+ -+#ifdef CONFIG_SCHED_DEBUG -+extern bool sched_debug_enabled; -+#endif -+ -+extern void schedule_idle(void); -+ -+#ifdef CONFIG_IRQ_TIME_ACCOUNTING -+struct irqtime { -+ u64 total; -+ u64 tick_delta; -+ u64 irq_start_time; -+ struct u64_stats_sync sync; -+}; -+ -+DECLARE_PER_CPU(struct irqtime, cpu_irqtime); -+ -+/* -+ * Returns the irqtime minus the softirq time computed by ksoftirqd. -+ * Otherwise ksoftirqd's sum_exec_runtime is substracted its own runtime -+ * and never move forward. -+ */ -+static inline u64 irq_time_read(int cpu) -+{ -+ struct irqtime *irqtime = &per_cpu(cpu_irqtime, cpu); -+ unsigned int seq; -+ u64 total; -+ -+ do { -+ seq = __u64_stats_fetch_begin(&irqtime->sync); -+ total = irqtime->total; -+ } while (__u64_stats_fetch_retry(&irqtime->sync, seq)); -+ -+ return total; -+} -+#endif /* CONFIG_IRQ_TIME_ACCOUNTING */ -+ -+#ifdef CONFIG_SMP -+static inline int cpu_of(struct rq *rq) -+{ -+ return rq->cpu; -+} -+#else /* CONFIG_SMP */ -+static inline int cpu_of(struct rq *rq) -+{ -+ return 0; -+} -+#endif -+ -+#ifdef CONFIG_CPU_FREQ -+DECLARE_PER_CPU(struct update_util_data *, cpufreq_update_util_data); -+ -+static inline void cpufreq_trigger(struct rq *rq, unsigned int flags) -+{ -+ struct update_util_data *data; -+ -+ data = rcu_dereference_sched(*per_cpu_ptr(&cpufreq_update_util_data, -+ cpu_of(rq))); -+ -+ if (data) -+ data->func(data, rq->niffies, flags); -+} -+#else -+static inline void cpufreq_trigger(struct rq *rq, unsigned int flag) -+{ -+} -+#endif /* CONFIG_CPU_FREQ */ -+ -+#ifdef arch_scale_freq_capacity -+#ifndef arch_scale_freq_invariant -+#define arch_scale_freq_invariant() (true) -+#endif -+#else /* arch_scale_freq_capacity */ -+#define arch_scale_freq_invariant() (false) -+#endif -+ -+/* -+ * This should only be called when current == rq->idle. Dodgy workaround for -+ * when softirqs are pending and we are in the idle loop. Setting current to -+ * resched will kick us out of the idle loop and the softirqs will be serviced -+ * on our next pass through schedule(). -+ */ -+static inline bool softirq_pending(int cpu) -+{ -+ if (likely(!local_softirq_pending())) -+ return false; -+ set_tsk_need_resched(current); -+ return true; -+} -+ -+#ifdef CONFIG_64BIT -+static inline u64 read_sum_exec_runtime(struct task_struct *t) -+{ -+ return tsk_seruntime(t); -+} -+#else -+struct rq *task_rq_lock(struct task_struct *p, unsigned long *flags); -+void task_rq_unlock(struct rq *rq, struct task_struct *p, unsigned long *flags); -+ -+static inline u64 read_sum_exec_runtime(struct task_struct *t) -+{ -+ unsigned long flags; -+ u64 ns; -+ struct rq *rq; -+ -+ rq = task_rq_lock(t, &flags); -+ ns = tsk_seruntime(t); -+ task_rq_unlock(rq, t, &flags); -+ -+ return ns; -+} -+#endif -+ -+#endif /* MUQSS_SCHED_H */ -diff -Nur a/kernel/sched/sched.h b/kernel/sched/sched.h ---- a/kernel/sched/sched.h 2018-12-21 13:13:19.000000000 +0000 -+++ b/kernel/sched/sched.h 2019-01-05 20:22:51.099998516 +0000 -@@ -1,5 +1,8 @@ - /* SPDX-License-Identifier: GPL-2.0 */ - -+#ifdef CONFIG_SCHED_MUQSS -+#include "MuQSS.h" -+#else /* CONFIG_SCHED_MUQSS */ - #include - #include - #include -@@ -2103,3 +2106,29 @@ - #else /* arch_scale_freq_capacity */ - #define arch_scale_freq_invariant() (false) - #endif -+ -+static inline bool softirq_pending(int cpu) -+{ -+ return false; -+} -+ -+#ifdef CONFIG_64BIT -+static inline u64 read_sum_exec_runtime(struct task_struct *t) -+{ -+ return t->se.sum_exec_runtime; -+} -+#else -+static inline u64 read_sum_exec_runtime(struct task_struct *t) -+{ -+ u64 ns; -+ struct rq_flags rf; -+ struct rq *rq; -+ -+ rq = task_rq_lock(t, &rf); -+ ns = t->se.sum_exec_runtime; -+ task_rq_unlock(rq, t, &rf); -+ -+ return ns; -+} -+#endif -+#endif /* CONFIG_SCHED_MUQSS */ -diff -Nur a/kernel/skip_list.c b/kernel/skip_list.c ---- a/kernel/skip_list.c 1970-01-01 01:00:00.000000000 +0100 -+++ b/kernel/skip_list.c 2019-01-05 20:22:51.099998516 +0000 -@@ -0,0 +1,148 @@ -+/* -+ Copyright (C) 2011,2016 Con Kolivas. -+ -+ Code based on example originally by William Pugh. -+ -+Skip Lists are a probabilistic alternative to balanced trees, as -+described in the June 1990 issue of CACM and were invented by -+William Pugh in 1987. -+ -+A couple of comments about this implementation: -+The routine randomLevel has been hard-coded to generate random -+levels using p=0.25. It can be easily changed. -+ -+The insertion routine has been implemented so as to use the -+dirty hack described in the CACM paper: if a random level is -+generated that is more than the current maximum level, the -+current maximum level plus one is used instead. -+ -+Levels start at zero and go up to MaxLevel (which is equal to -+MaxNumberOfLevels-1). -+ -+The routines defined in this file are: -+ -+init: defines slnode -+ -+new_skiplist: returns a new, empty list -+ -+randomLevel: Returns a random level based on a u64 random seed passed to it. -+In MuQSS, the "niffy" time is used for this purpose. -+ -+insert(l,key, value): inserts the binding (key, value) into l. This operation -+occurs in O(log n) time. -+ -+delnode(slnode, l, node): deletes any binding of key from the l based on the -+actual node value. This operation occurs in O(k) time where k is the -+number of levels of the node in question (max 8). The original delete -+function occurred in O(log n) time and involved a search. -+ -+MuQSS Notes: In this implementation of skiplists, there are bidirectional -+next/prev pointers and the insert function returns a pointer to the actual -+node the value is stored. The key here is chosen by the scheduler so as to -+sort tasks according to the priority list requirements and is no longer used -+by the scheduler after insertion. The scheduler lookup, however, occurs in -+O(1) time because it is always the first item in the level 0 linked list. -+Since the task struct stores a copy of the node pointer upon skiplist_insert, -+it can also remove it much faster than the original implementation with the -+aid of prev<->next pointer manipulation and no searching. -+ -+*/ -+ -+#include -+#include -+ -+#define MaxNumberOfLevels 8 -+#define MaxLevel (MaxNumberOfLevels - 1) -+ -+void skiplist_init(skiplist_node *slnode) -+{ -+ int i; -+ -+ slnode->key = 0xFFFFFFFFFFFFFFFF; -+ slnode->level = 0; -+ slnode->value = NULL; -+ for (i = 0; i < MaxNumberOfLevels; i++) -+ slnode->next[i] = slnode->prev[i] = slnode; -+} -+ -+skiplist *new_skiplist(skiplist_node *slnode) -+{ -+ skiplist *l = kzalloc(sizeof(skiplist), GFP_ATOMIC); -+ -+ BUG_ON(!l); -+ l->header = slnode; -+ return l; -+} -+ -+void free_skiplist(skiplist *l) -+{ -+ skiplist_node *p, *q; -+ -+ p = l->header; -+ do { -+ q = p->next[0]; -+ p->next[0]->prev[0] = q->prev[0]; -+ skiplist_node_init(p); -+ p = q; -+ } while (p != l->header); -+ kfree(l); -+} -+ -+void skiplist_node_init(skiplist_node *node) -+{ -+ memset(node, 0, sizeof(skiplist_node)); -+} -+ -+static inline unsigned int randomLevel(const long unsigned int randseed) -+{ -+ return find_first_bit(&randseed, MaxLevel) / 2; -+} -+ -+void skiplist_insert(skiplist *l, skiplist_node *node, keyType key, valueType value, unsigned int randseed) -+{ -+ skiplist_node *update[MaxNumberOfLevels]; -+ skiplist_node *p, *q; -+ int k = l->level; -+ -+ p = l->header; -+ do { -+ while (q = p->next[k], q->key <= key) -+ p = q; -+ update[k] = p; -+ } while (--k >= 0); -+ -+ ++l->entries; -+ k = randomLevel(randseed); -+ if (k > l->level) { -+ k = ++l->level; -+ update[k] = l->header; -+ } -+ -+ node->level = k; -+ node->key = key; -+ node->value = value; -+ do { -+ p = update[k]; -+ node->next[k] = p->next[k]; -+ p->next[k] = node; -+ node->prev[k] = p; -+ node->next[k]->prev[k] = node; -+ } while (--k >= 0); -+} -+ -+void skiplist_delete(skiplist *l, skiplist_node *node) -+{ -+ int k, m = node->level; -+ -+ for (k = 0; k <= m; k++) { -+ node->prev[k]->next[k] = node->next[k]; -+ node->next[k]->prev[k] = node->prev[k]; -+ } -+ skiplist_node_init(node); -+ if (m == l->level) { -+ while (l->header->next[m] == l->header && l->header->prev[m] == l->header && m > 0) -+ m--; -+ l->level = m; -+ } -+ l->entries--; -+} -diff -Nur a/kernel/sysctl.c b/kernel/sysctl.c ---- a/kernel/sysctl.c 2019-01-05 20:17:13.859238862 +0000 -+++ b/kernel/sysctl.c 2019-01-05 20:22:51.099998516 +0000 -@@ -135,6 +135,12 @@ - static unsigned long one_ul __read_only = 1; - static int one_hundred __read_only = 100; - static int one_thousand __read_only = 1000; -+#ifdef CONFIG_SCHED_MUQSS -+extern int rr_interval; -+extern int sched_interactive; -+extern int sched_iso_cpu; -+extern int sched_yield_type; -+#endif - #ifdef CONFIG_PRINTK - static int ten_thousand __read_only = 10000; - #endif -@@ -296,7 +302,7 @@ - { } - }; - --#ifdef CONFIG_SCHED_DEBUG -+#if defined(CONFIG_SCHED_DEBUG) && !defined(CONFIG_SCHED_MUQSS) - static int min_sched_granularity_ns __read_only = 100000; /* 100 usecs */ - static int max_sched_granularity_ns __read_only = NSEC_PER_SEC; /* 1 second */ - static int min_wakeup_granularity_ns __read_only; /* 0 usecs */ -@@ -313,6 +319,7 @@ - #endif - - static struct ctl_table kern_table[] = { -+#ifndef CONFIG_SCHED_MUQSS - { - .procname = "sched_child_runs_first", - .data = &sysctl_sched_child_runs_first, -@@ -475,6 +482,7 @@ - .extra1 = &one, - }, - #endif -+#endif /* !CONFIG_SCHED_MUQSS */ - #ifdef CONFIG_PROVE_LOCKING - { - .procname = "prove_locking", -@@ -1073,6 +1081,44 @@ - .proc_handler = proc_dointvec, - }, - #endif -+#ifdef CONFIG_SCHED_MUQSS -+ { -+ .procname = "rr_interval", -+ .data = &rr_interval, -+ .maxlen = sizeof (int), -+ .mode = 0644, -+ .proc_handler = &proc_dointvec_minmax, -+ .extra1 = &one, -+ .extra2 = &one_thousand, -+ }, -+ { -+ .procname = "interactive", -+ .data = &sched_interactive, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = &proc_dointvec_minmax, -+ .extra1 = &zero, -+ .extra2 = &one, -+ }, -+ { -+ .procname = "iso_cpu", -+ .data = &sched_iso_cpu, -+ .maxlen = sizeof (int), -+ .mode = 0644, -+ .proc_handler = &proc_dointvec_minmax, -+ .extra1 = &zero, -+ .extra2 = &one_hundred, -+ }, -+ { -+ .procname = "yield_type", -+ .data = &sched_yield_type, -+ .maxlen = sizeof (int), -+ .mode = 0644, -+ .proc_handler = &proc_dointvec_minmax, -+ .extra1 = &zero, -+ .extra2 = &two, -+ }, -+#endif - #if defined(CONFIG_S390) && defined(CONFIG_SMP) - { - .procname = "spin_retry", -diff -Nur a/kernel/time/clockevents.c b/kernel/time/clockevents.c ---- a/kernel/time/clockevents.c 2018-12-21 13:13:19.000000000 +0000 -+++ b/kernel/time/clockevents.c 2019-01-05 20:22:51.099998516 +0000 -@@ -198,8 +198,13 @@ - - #ifdef CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST - -+#ifdef CONFIG_SCHED_MUQSS -+/* Limit min_delta to 100us */ -+#define MIN_DELTA_LIMIT (NSEC_PER_SEC / 10000) -+#else - /* Limit min_delta to a jiffie */ - #define MIN_DELTA_LIMIT (NSEC_PER_SEC / HZ) -+#endif - - /** - * clockevents_increase_min_delta - raise minimum delta of a clock event device -diff -Nur a/kernel/time/posix-cpu-timers.c b/kernel/time/posix-cpu-timers.c ---- a/kernel/time/posix-cpu-timers.c 2018-12-21 13:13:19.000000000 +0000 -+++ b/kernel/time/posix-cpu-timers.c 2019-01-05 20:22:51.109998835 +0000 -@@ -818,7 +818,7 @@ - tsk_expires->virt_exp = expires; - - tsk_expires->sched_exp = check_timers_list(++timers, firing, -- tsk->se.sum_exec_runtime); -+ tsk_seruntime(tsk)); - - /* - * Check for the special case thread timers. -@@ -828,7 +828,7 @@ - unsigned long hard = task_rlimit_max(tsk, RLIMIT_RTTIME); - - if (hard != RLIM_INFINITY && -- tsk->rt.timeout > DIV_ROUND_UP(hard, USEC_PER_SEC/HZ)) { -+ tsk_rttimeout(tsk) > DIV_ROUND_UP(hard, USEC_PER_SEC/HZ)) { - /* - * At the hard limit, we just die. - * No need to calculate anything else now. -@@ -840,7 +840,7 @@ - __group_send_sig_info(SIGKILL, SEND_SIG_PRIV, tsk); - return; - } -- if (tsk->rt.timeout > DIV_ROUND_UP(soft, USEC_PER_SEC/HZ)) { -+ if (tsk_rttimeout(tsk) > DIV_ROUND_UP(soft, USEC_PER_SEC/HZ)) { - /* - * At the soft limit, send a SIGXCPU every second. - */ -@@ -1081,7 +1081,7 @@ - struct task_cputime task_sample; - - task_cputime(tsk, &task_sample.utime, &task_sample.stime); -- task_sample.sum_exec_runtime = tsk->se.sum_exec_runtime; -+ task_sample.sum_exec_runtime = tsk_seruntime(tsk); - if (task_cputime_expired(&task_sample, &tsk->cputime_expires)) - return 1; - } -diff -Nur a/kernel/time/timer.c b/kernel/time/timer.c ---- a/kernel/time/timer.c 2019-01-05 20:17:13.859238862 +0000 -+++ b/kernel/time/timer.c 2019-01-05 20:22:51.109998835 +0000 -@@ -1434,7 +1434,7 @@ - * Check, if the next hrtimer event is before the next timer wheel - * event: - */ --static u64 cmp_next_hrtimer_event(u64 basem, u64 expires) -+static u64 cmp_next_hrtimer_event(struct timer_base *base, u64 basem, u64 expires) - { - u64 nextevt = hrtimer_get_next_event(); - -@@ -1452,6 +1452,9 @@ - if (nextevt <= basem) - return basem; - -+ if (nextevt < expires && nextevt - basem <= TICK_NSEC) -+ base->is_idle = false; -+ - /* - * Round up to the next jiffie. High resolution timers are - * off, so the hrtimers are expired in the tick and we need to -@@ -1521,7 +1524,7 @@ - } - raw_spin_unlock(&base->lock); - -- return cmp_next_hrtimer_event(basem, expires); -+ return cmp_next_hrtimer_event(base, basem, expires); - } - - /** -diff -Nur a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c ---- a/kernel/trace/trace_selftest.c 2018-12-21 13:13:19.000000000 +0000 -+++ b/kernel/trace/trace_selftest.c 2019-01-05 20:22:51.109998835 +0000 -@@ -1041,10 +1041,15 @@ - { - /* Make this a -deadline thread */ - static const struct sched_attr attr = { -+#ifdef CONFIG_SCHED_MUQSS -+ /* No deadline on MuQSS, use RR */ -+ .sched_policy = SCHED_RR, -+#else - .sched_policy = SCHED_DEADLINE, - .sched_runtime = 100000ULL, - .sched_deadline = 10000000ULL, - .sched_period = 10000000ULL -+#endif - }; - struct wakeup_test_data *x = data; - diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0002-Make-preemptible-kernel-default.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0002-Make-preemptible-kernel-default.patch deleted file mode 100644 index 69abb373..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0002-Make-preemptible-kernel-default.patch +++ /dev/null @@ -1,733 +0,0 @@ -From e8e37da685f7988182d7920a711e00dd2457af65 Mon Sep 17 00:00:00 2001 -From: Con Kolivas -Date: Sat, 29 Oct 2016 11:20:37 +1100 -Subject: [PATCH 02/16] Make preemptible kernel default. - -Make full preempt default on all arches. ---- - arch/arc/configs/tb10x_defconfig | 2 +- - arch/arm/configs/bcm2835_defconfig | 2 +- - arch/arm/configs/imx_v6_v7_defconfig | 2 +- - arch/arm/configs/mps2_defconfig | 2 +- - arch/arm/configs/mxs_defconfig | 2 +- - arch/blackfin/configs/BF518F-EZBRD_defconfig | 2 +- - arch/blackfin/configs/BF526-EZBRD_defconfig | 2 +- - arch/blackfin/configs/BF527-EZKIT-V2_defconfig | 2 +- - arch/blackfin/configs/BF527-EZKIT_defconfig | 2 +- - arch/blackfin/configs/BF527-TLL6527M_defconfig | 2 +- - arch/blackfin/configs/BF533-EZKIT_defconfig | 2 +- - arch/blackfin/configs/BF533-STAMP_defconfig | 2 +- - arch/blackfin/configs/BF537-STAMP_defconfig | 2 +- - arch/blackfin/configs/BF538-EZKIT_defconfig | 2 +- - arch/blackfin/configs/BF548-EZKIT_defconfig | 2 +- - arch/blackfin/configs/BF561-ACVILON_defconfig | 2 +- - arch/blackfin/configs/BF561-EZKIT-SMP_defconfig | 2 +- - arch/blackfin/configs/BF561-EZKIT_defconfig | 2 +- - arch/blackfin/configs/BF609-EZKIT_defconfig | 2 +- - arch/blackfin/configs/BlackStamp_defconfig | 2 +- - arch/blackfin/configs/CM-BF527_defconfig | 2 +- - arch/blackfin/configs/PNAV-10_defconfig | 2 +- - arch/blackfin/configs/SRV1_defconfig | 2 +- - arch/blackfin/configs/TCM-BF518_defconfig | 2 +- - arch/mips/configs/fuloong2e_defconfig | 3 ++- - arch/mips/configs/gpr_defconfig | 3 ++- - arch/mips/configs/ip22_defconfig | 3 ++- - arch/mips/configs/ip28_defconfig | 3 ++- - arch/mips/configs/jazz_defconfig | 3 ++- - arch/mips/configs/mtx1_defconfig | 3 ++- - arch/mips/configs/nlm_xlr_defconfig | 2 +- - arch/mips/configs/pic32mzda_defconfig | 2 +- - arch/mips/configs/pistachio_defconfig | 2 +- - arch/mips/configs/pnx8335_stb225_defconfig | 2 +- - arch/mips/configs/rm200_defconfig | 3 ++- - arch/parisc/configs/712_defconfig | 2 +- - arch/parisc/configs/c3000_defconfig | 2 +- - arch/parisc/configs/default_defconfig | 2 +- - arch/powerpc/configs/c2k_defconfig | 2 +- - arch/powerpc/configs/ppc6xx_defconfig | 2 +- - arch/score/configs/spct6600_defconfig | 2 +- - arch/sh/configs/se7712_defconfig | 2 +- - arch/sh/configs/se7721_defconfig | 2 +- - arch/sh/configs/titan_defconfig | 2 +- - arch/sparc/configs/sparc64_defconfig | 2 +- - arch/tile/configs/tilegx_defconfig | 2 +- - arch/tile/configs/tilepro_defconfig | 2 +- - arch/x86/configs/i386_defconfig | 2 +- - arch/x86/configs/x86_64_defconfig | 2 +- - kernel/Kconfig.preempt | 7 ++++--- - 50 files changed, 60 insertions(+), 52 deletions(-) - -diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig -index f30182549395..42910f628869 100644 ---- a/arch/arc/configs/tb10x_defconfig -+++ b/arch/arc/configs/tb10x_defconfig -@@ -28,7 +28,7 @@ CONFIG_ARC_PLAT_TB10X=y - CONFIG_ARC_CACHE_LINE_SHIFT=5 - CONFIG_HZ=250 - CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk" --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - # CONFIG_COMPACTION is not set - CONFIG_NET=y - CONFIG_PACKET=y -diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig -index 43dab4890ad3..44a52166ca5e 100644 ---- a/arch/arm/configs/bcm2835_defconfig -+++ b/arch/arm/configs/bcm2835_defconfig -@@ -29,7 +29,7 @@ CONFIG_MODULE_UNLOAD=y - CONFIG_ARCH_MULTI_V6=y - CONFIG_ARCH_BCM=y - CONFIG_ARCH_BCM2835=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_AEABI=y - CONFIG_KSM=y - CONFIG_CLEANCACHE=y -diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig -index 32acac9ab81a..1482bb312987 100644 ---- a/arch/arm/configs/imx_v6_v7_defconfig -+++ b/arch/arm/configs/imx_v6_v7_defconfig -@@ -47,7 +47,7 @@ CONFIG_PCI_MSI=y - CONFIG_PCI_IMX6=y - CONFIG_SMP=y - CONFIG_ARM_PSCI=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_AEABI=y - CONFIG_HIGHMEM=y - CONFIG_CMA=y -diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig -index 0bcdec7cc169..10ceaefa51e0 100644 ---- a/arch/arm/configs/mps2_defconfig -+++ b/arch/arm/configs/mps2_defconfig -@@ -18,7 +18,7 @@ CONFIG_ARCH_MPS2=y - CONFIG_SET_MEM_PARAM=y - CONFIG_DRAM_BASE=0x21000000 - CONFIG_DRAM_SIZE=0x1000000 --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - # CONFIG_ATAGS is not set - CONFIG_ZBOOT_ROM_TEXT=0x0 - CONFIG_ZBOOT_ROM_BSS=0x0 -diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig -index e5822ab01b7d..3e77e02f678f 100644 ---- a/arch/arm/configs/mxs_defconfig -+++ b/arch/arm/configs/mxs_defconfig -@@ -27,7 +27,7 @@ CONFIG_BLK_DEV_INTEGRITY=y - # CONFIG_ARCH_MULTI_V7 is not set - CONFIG_ARCH_MXS=y - # CONFIG_ARM_THUMB is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_AEABI=y - CONFIG_NET=y - CONFIG_PACKET=y -diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig -index 99c00d835f47..39b91dfa55b5 100644 ---- a/arch/blackfin/configs/BF518F-EZBRD_defconfig -+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig -@@ -19,7 +19,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set - # CONFIG_IOSCHED_CFQ is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF518=y - CONFIG_IRQ_TIMER0=12 - # CONFIG_CYCLES_CLOCKSOURCE is not set -diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig -index e66ba31ef84d..675cadb3a0c4 100644 ---- a/arch/blackfin/configs/BF526-EZBRD_defconfig -+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig -@@ -19,7 +19,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set - # CONFIG_IOSCHED_CFQ is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF526=y - CONFIG_IRQ_TIMER0=12 - CONFIG_BFIN526_EZBRD=y -diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig -index 0207c588c19f..4c517c443af5 100644 ---- a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig -+++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig -@@ -19,7 +19,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set - # CONFIG_IOSCHED_CFQ is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF527=y - CONFIG_BF_REV_0_2=y - CONFIG_BFIN527_EZKIT_V2=y -diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig -index 99c131ba7d90..bf8df3e6cf02 100644 ---- a/arch/blackfin/configs/BF527-EZKIT_defconfig -+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig -@@ -19,7 +19,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set - # CONFIG_IOSCHED_CFQ is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF527=y - CONFIG_BF_REV_0_1=y - CONFIG_IRQ_USB_INT0=11 -diff --git a/arch/blackfin/configs/BF527-TLL6527M_defconfig b/arch/blackfin/configs/BF527-TLL6527M_defconfig -index cdeb51856f26..0220b3b15c53 100644 ---- a/arch/blackfin/configs/BF527-TLL6527M_defconfig -+++ b/arch/blackfin/configs/BF527-TLL6527M_defconfig -@@ -21,7 +21,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_LBDAF is not set - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF527=y - CONFIG_BF_REV_0_2=y - CONFIG_BFIN527_TLL6527M=y -diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig -index ed7d2c096739..6023e3fd2c48 100644 ---- a/arch/blackfin/configs/BF533-EZKIT_defconfig -+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig -@@ -19,7 +19,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set - # CONFIG_IOSCHED_CFQ is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BFIN533_EZKIT=y - CONFIG_TIMER0=11 - CONFIG_CLKIN_HZ=27000000 -diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig -index 0c241f4d28d7..f5cd0f18b711 100644 ---- a/arch/blackfin/configs/BF533-STAMP_defconfig -+++ b/arch/blackfin/configs/BF533-STAMP_defconfig -@@ -19,7 +19,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set - # CONFIG_IOSCHED_CFQ is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_TIMER0=11 - CONFIG_HIGH_RES_TIMERS=y - CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 -diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig -index e5360b30e39a..48085fde7f9e 100644 ---- a/arch/blackfin/configs/BF537-STAMP_defconfig -+++ b/arch/blackfin/configs/BF537-STAMP_defconfig -@@ -19,7 +19,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set - # CONFIG_IOSCHED_CFQ is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF537=y - CONFIG_HIGH_RES_TIMERS=y - CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 -diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig -index 60f6fb86125c..12deeaaef3cb 100644 ---- a/arch/blackfin/configs/BF538-EZKIT_defconfig -+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig -@@ -21,7 +21,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set - # CONFIG_IOSCHED_CFQ is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF538=y - CONFIG_IRQ_TIMER0=12 - CONFIG_IRQ_TIMER1=12 -diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig -index 38cb17d218d4..6a68ffc55b5a 100644 ---- a/arch/blackfin/configs/BF548-EZKIT_defconfig -+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig -@@ -19,7 +19,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set - # CONFIG_IOSCHED_CFQ is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF548_std=y - CONFIG_IRQ_TIMER0=11 - # CONFIG_CYCLES_CLOCKSOURCE is not set -diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig -index 78f6bc79f910..e9f3ba783a4e 100644 ---- a/arch/blackfin/configs/BF561-ACVILON_defconfig -+++ b/arch/blackfin/configs/BF561-ACVILON_defconfig -@@ -20,7 +20,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_LBDAF is not set - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF561=y - CONFIG_BF_REV_0_5=y - CONFIG_IRQ_TIMER0=10 -diff --git a/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig b/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig -index fac8bb578249..89b75a6c3fab 100644 ---- a/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig -+++ b/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig -@@ -19,7 +19,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set - # CONFIG_IOSCHED_CFQ is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF561=y - CONFIG_SMP=y - CONFIG_IRQ_TIMER0=10 -diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig -index 2a2e4d0cebc1..67b3d2f419ba 100644 ---- a/arch/blackfin/configs/BF561-EZKIT_defconfig -+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig -@@ -19,7 +19,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set - # CONFIG_IOSCHED_CFQ is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF561=y - CONFIG_IRQ_TIMER0=10 - CONFIG_CLKIN_HZ=30000000 -diff --git a/arch/blackfin/configs/BF609-EZKIT_defconfig b/arch/blackfin/configs/BF609-EZKIT_defconfig -index 3ce77f07208a..8cc75d4218fb 100644 ---- a/arch/blackfin/configs/BF609-EZKIT_defconfig -+++ b/arch/blackfin/configs/BF609-EZKIT_defconfig -@@ -20,7 +20,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set - # CONFIG_IOSCHED_CFQ is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF609=y - CONFIG_PINT1_ASSIGN=0x01010000 - CONFIG_PINT2_ASSIGN=0x07000101 -diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig -index f4a9200e1ab1..9faf0ec7007f 100644 ---- a/arch/blackfin/configs/BlackStamp_defconfig -+++ b/arch/blackfin/configs/BlackStamp_defconfig -@@ -17,7 +17,7 @@ CONFIG_MODULE_UNLOAD=y - CONFIG_MODULE_FORCE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF532=y - CONFIG_BF_REV_0_5=y - CONFIG_BLACKSTAMP=y -diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig -index 1902bb05d086..4a1ad4fd7bb2 100644 ---- a/arch/blackfin/configs/CM-BF527_defconfig -+++ b/arch/blackfin/configs/CM-BF527_defconfig -@@ -19,7 +19,7 @@ CONFIG_MODULES=y - CONFIG_MODULE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF527=y - CONFIG_BF_REV_0_1=y - CONFIG_IRQ_TIMER0=12 -diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig -index c7926812971c..9d787e28bbe8 100644 ---- a/arch/blackfin/configs/PNAV-10_defconfig -+++ b/arch/blackfin/configs/PNAV-10_defconfig -@@ -15,7 +15,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set - # CONFIG_IOSCHED_CFQ is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF537=y - CONFIG_IRQ_TIMER0=12 - CONFIG_PNAV10=y -diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig -index 23fdc57d657a..225df32dc9a8 100644 ---- a/arch/blackfin/configs/SRV1_defconfig -+++ b/arch/blackfin/configs/SRV1_defconfig -@@ -13,7 +13,7 @@ CONFIG_MMAP_ALLOW_UNINITIALIZED=y - CONFIG_MODULES=y - CONFIG_MODULE_UNLOAD=y - # CONFIG_IOSCHED_DEADLINE is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF537=y - CONFIG_IRQ_TIMER0=12 - CONFIG_BOOT_LOAD=0x400000 -diff --git a/arch/blackfin/configs/TCM-BF518_defconfig b/arch/blackfin/configs/TCM-BF518_defconfig -index e28959479fe0..425c24e43c34 100644 ---- a/arch/blackfin/configs/TCM-BF518_defconfig -+++ b/arch/blackfin/configs/TCM-BF518_defconfig -@@ -23,7 +23,7 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_IOSCHED_DEADLINE is not set - # CONFIG_IOSCHED_CFQ is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BF518=y - CONFIG_BF_REV_0_1=y - CONFIG_BFIN518F_TCM=y -diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig -index 499f51498ecb..f7cb39b0662c 100644 ---- a/arch/mips/configs/fuloong2e_defconfig -+++ b/arch/mips/configs/fuloong2e_defconfig -@@ -2,7 +2,8 @@ CONFIG_MACH_LOONGSON64=y - CONFIG_64BIT=y - CONFIG_NO_HZ=y - CONFIG_HIGH_RES_TIMERS=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y -+CONFIG_EXPERIMENTAL=y - CONFIG_LOCALVERSION="-fuloong2e" - # CONFIG_LOCALVERSION_AUTO is not set - CONFIG_SYSVIPC=y -diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig -index 55438fc9991e..db03ef4f737d 100644 ---- a/arch/mips/configs/gpr_defconfig -+++ b/arch/mips/configs/gpr_defconfig -@@ -1,7 +1,8 @@ - CONFIG_MIPS_ALCHEMY=y - CONFIG_MIPS_GPR=y - CONFIG_HIGH_RES_TIMERS=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y -+CONFIG_EXPERIMENTAL=y - # CONFIG_LOCALVERSION_AUTO is not set - CONFIG_SYSVIPC=y - CONFIG_POSIX_MQUEUE=y -diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig -index 83e8fe2064aa..93e7b167433b 100644 ---- a/arch/mips/configs/ip22_defconfig -+++ b/arch/mips/configs/ip22_defconfig -@@ -3,7 +3,8 @@ CONFIG_CPU_R5000=y - CONFIG_NO_HZ=y - CONFIG_HIGH_RES_TIMERS=y - CONFIG_HZ_1000=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y -+CONFIG_EXPERIMENTAL=y - CONFIG_SYSVIPC=y - CONFIG_IKCONFIG=y - CONFIG_IKCONFIG_PROC=y -diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig -index d0a4c2cfacf8..6f0600e99c25 100644 ---- a/arch/mips/configs/ip28_defconfig -+++ b/arch/mips/configs/ip28_defconfig -@@ -1,6 +1,7 @@ - CONFIG_SGI_IP28=y - CONFIG_ARC_CONSOLE=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y -+CONFIG_EXPERIMENTAL=y - CONFIG_SYSVIPC=y - CONFIG_IKCONFIG=y - CONFIG_IKCONFIG_PROC=y -diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig -index 9ad1c94376c8..1d62ce7ff5dc 100644 ---- a/arch/mips/configs/jazz_defconfig -+++ b/arch/mips/configs/jazz_defconfig -@@ -1,6 +1,7 @@ - CONFIG_MACH_JAZZ=y - CONFIG_OLIVETTI_M700=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y -+CONFIG_EXPERIMENTAL=y - CONFIG_SYSVIPC=y - CONFIG_POSIX_MQUEUE=y - CONFIG_BSD_PROCESS_ACCT=y -diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig -index c3d0d0a6e044..aa3426d5f7d7 100644 ---- a/arch/mips/configs/mtx1_defconfig -+++ b/arch/mips/configs/mtx1_defconfig -@@ -1,6 +1,7 @@ - CONFIG_MIPS_ALCHEMY=y - CONFIG_MIPS_MTX1=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y -+CONFIG_EXPERIMENTAL=y - # CONFIG_LOCALVERSION_AUTO is not set - CONFIG_SYSVIPC=y - CONFIG_POSIX_MQUEUE=y -diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig -index 1e18fd7de209..b514e91e5426 100644 ---- a/arch/mips/configs/nlm_xlr_defconfig -+++ b/arch/mips/configs/nlm_xlr_defconfig -@@ -5,7 +5,7 @@ CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 - CONFIG_SMP=y - CONFIG_NO_HZ=y - CONFIG_HIGH_RES_TIMERS=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_KEXEC=y - CONFIG_CROSS_COMPILE="" - # CONFIG_LOCALVERSION_AUTO is not set -diff --git a/arch/mips/configs/pic32mzda_defconfig b/arch/mips/configs/pic32mzda_defconfig -index 52192c632ae8..96b087498dab 100644 ---- a/arch/mips/configs/pic32mzda_defconfig -+++ b/arch/mips/configs/pic32mzda_defconfig -@@ -1,7 +1,7 @@ - CONFIG_MACH_PIC32=y - CONFIG_DTB_PIC32_MZDA_SK=y - CONFIG_HZ_100=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - # CONFIG_SECCOMP is not set - CONFIG_SYSVIPC=y - CONFIG_NO_HZ=y -diff --git a/arch/mips/configs/pistachio_defconfig b/arch/mips/configs/pistachio_defconfig -index b22a3cf149b6..cfffca3d37f4 100644 ---- a/arch/mips/configs/pistachio_defconfig -+++ b/arch/mips/configs/pistachio_defconfig -@@ -5,7 +5,7 @@ CONFIG_MIPS_CPS=y - CONFIG_DEFAULT_MMAP_MIN_ADDR=32768 - CONFIG_ZSMALLOC=y - CONFIG_NR_CPUS=4 --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - # CONFIG_LOCALVERSION_AUTO is not set - CONFIG_DEFAULT_HOSTNAME="localhost" - CONFIG_SYSVIPC=y -diff --git a/arch/mips/configs/pnx8335_stb225_defconfig b/arch/mips/configs/pnx8335_stb225_defconfig -index 81b5eb89446c..19f8cea849a1 100644 ---- a/arch/mips/configs/pnx8335_stb225_defconfig -+++ b/arch/mips/configs/pnx8335_stb225_defconfig -@@ -3,7 +3,7 @@ CONFIG_CPU_LITTLE_ENDIAN=y - CONFIG_NO_HZ=y - CONFIG_HIGH_RES_TIMERS=y - CONFIG_HZ_128=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - # CONFIG_SECCOMP is not set - # CONFIG_LOCALVERSION_AUTO is not set - # CONFIG_SWAP is not set -diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig -index 99679e514042..2ced507a8ba7 100644 ---- a/arch/mips/configs/rm200_defconfig -+++ b/arch/mips/configs/rm200_defconfig -@@ -2,7 +2,8 @@ CONFIG_SNI_RM=y - CONFIG_CPU_LITTLE_ENDIAN=y - CONFIG_ARC_CONSOLE=y - CONFIG_HZ_1000=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y -+CONFIG_EXPERIMENTAL=y - CONFIG_SYSVIPC=y - CONFIG_POSIX_MQUEUE=y - CONFIG_BSD_PROCESS_ACCT=y -diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig -index ccc109761f44..a6a5b0b7a9c9 100644 ---- a/arch/parisc/configs/712_defconfig -+++ b/arch/parisc/configs/712_defconfig -@@ -13,7 +13,7 @@ CONFIG_MODULES=y - CONFIG_MODULE_UNLOAD=y - CONFIG_MODULE_FORCE_UNLOAD=y - CONFIG_PA7100LC=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_GSC_LASI=y - # CONFIG_PDC_CHASSIS is not set - CONFIG_BINFMT_MISC=m -diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig -index 8d41a73bd71b..b8e0a6662ff9 100644 ---- a/arch/parisc/configs/c3000_defconfig -+++ b/arch/parisc/configs/c3000_defconfig -@@ -13,7 +13,7 @@ CONFIG_MODULES=y - CONFIG_MODULE_UNLOAD=y - CONFIG_MODULE_FORCE_UNLOAD=y - CONFIG_PA8X00=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - # CONFIG_GSC is not set - CONFIG_PCI=y - CONFIG_PCI_LBA=y -diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/default_defconfig -index 52c9050a7c5c..8d86d2e989f4 100644 ---- a/arch/parisc/configs/default_defconfig -+++ b/arch/parisc/configs/default_defconfig -@@ -14,7 +14,7 @@ CONFIG_MODULE_UNLOAD=y - CONFIG_MODULE_FORCE_UNLOAD=y - # CONFIG_BLK_DEV_BSG is not set - CONFIG_PA7100LC=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_IOMMU_CCIO=y - CONFIG_GSC_LASI=y - CONFIG_GSC_WAX=y -diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig -index f1552af9eecc..f8505e6ec7b3 100644 ---- a/arch/powerpc/configs/c2k_defconfig -+++ b/arch/powerpc/configs/c2k_defconfig -@@ -29,7 +29,7 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m - CONFIG_CPU_FREQ_GOV_ONDEMAND=m - CONFIG_GEN_RTC=y - CONFIG_HIGHMEM=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BINFMT_MISC=y - CONFIG_PM=y - CONFIG_PCI_MSI=y -diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig -index da0e8d535eb8..c016af41ab4f 100644 ---- a/arch/powerpc/configs/ppc6xx_defconfig -+++ b/arch/powerpc/configs/ppc6xx_defconfig -@@ -74,7 +74,7 @@ CONFIG_QE_GPIO=y - CONFIG_MCU_MPC8349EMITX=y - CONFIG_HIGHMEM=y - CONFIG_HZ_1000=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_BINFMT_MISC=y - CONFIG_HIBERNATION=y - CONFIG_PM_DEBUG=y -diff --git a/arch/score/configs/spct6600_defconfig b/arch/score/configs/spct6600_defconfig -index b2d8802f43b4..46434ca1fa10 100644 ---- a/arch/score/configs/spct6600_defconfig -+++ b/arch/score/configs/spct6600_defconfig -@@ -1,5 +1,5 @@ - CONFIG_HZ_100=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_EXPERIMENTAL=y - # CONFIG_LOCALVERSION_AUTO is not set - CONFIG_SYSVIPC=y -diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig -index 5a1097641247..eb5fbf554e7f 100644 ---- a/arch/sh/configs/se7712_defconfig -+++ b/arch/sh/configs/se7712_defconfig -@@ -23,7 +23,7 @@ CONFIG_FLATMEM_MANUAL=y - CONFIG_SH_SOLUTION_ENGINE=y - CONFIG_SH_PCLK_FREQ=66666666 - CONFIG_HEARTBEAT=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_CMDLINE_OVERWRITE=y - CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" - CONFIG_NET=y -diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig -index 9c0ef13bee10..cbaa65c8bf9e 100644 ---- a/arch/sh/configs/se7721_defconfig -+++ b/arch/sh/configs/se7721_defconfig -@@ -23,7 +23,7 @@ CONFIG_FLATMEM_MANUAL=y - CONFIG_SH_7721_SOLUTION_ENGINE=y - CONFIG_SH_PCLK_FREQ=33333333 - CONFIG_HEARTBEAT=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_CMDLINE_OVERWRITE=y - CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2" - CONFIG_NET=y -diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig -index ceb48e9b70f4..1a69eda6610c 100644 ---- a/arch/sh/configs/titan_defconfig -+++ b/arch/sh/configs/titan_defconfig -@@ -20,7 +20,7 @@ CONFIG_SH_TITAN=y - CONFIG_SH_PCLK_FREQ=30000000 - CONFIG_SH_DMA=y - CONFIG_SH_DMA_API=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_CMDLINE_OVERWRITE=y - CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw" - CONFIG_PCI=y -diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig -index 4d4e1cc6402f..04bea1d28ba7 100644 ---- a/arch/sparc/configs/sparc64_defconfig -+++ b/arch/sparc/configs/sparc64_defconfig -@@ -22,7 +22,7 @@ CONFIG_NO_HZ=y - CONFIG_HIGH_RES_TIMERS=y - CONFIG_NUMA=y - CONFIG_DEFAULT_MMAP_MIN_ADDR=8192 --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_SUN_LDOMS=y - CONFIG_PCI=y - CONFIG_PCI_MSI=y -diff --git a/arch/tile/configs/tilegx_defconfig b/arch/tile/configs/tilegx_defconfig -index 9f94435cc44f..aa78ee6cd5eb 100644 ---- a/arch/tile/configs/tilegx_defconfig -+++ b/arch/tile/configs/tilegx_defconfig -@@ -47,7 +47,7 @@ CONFIG_CFQ_GROUP_IOSCHED=y - CONFIG_NR_CPUS=100 - CONFIG_HZ_100=y - # CONFIG_COMPACTION is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_TILE_PCI_IO=y - CONFIG_PCI_DEBUG=y - # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -diff --git a/arch/tile/configs/tilepro_defconfig b/arch/tile/configs/tilepro_defconfig -index 1c5bd4f8ffca..38005862062c 100644 ---- a/arch/tile/configs/tilepro_defconfig -+++ b/arch/tile/configs/tilepro_defconfig -@@ -44,7 +44,7 @@ CONFIG_KARMA_PARTITION=y - CONFIG_CFQ_GROUP_IOSCHED=y - CONFIG_HZ_100=y - # CONFIG_COMPACTION is not set --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_PCI_DEBUG=y - # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set - CONFIG_BINFMT_MISC=y -diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig -index 0eb9f92f3717..e5890ae917e5 100644 ---- a/arch/x86/configs/i386_defconfig -+++ b/arch/x86/configs/i386_defconfig -@@ -41,7 +41,7 @@ CONFIG_SMP=y - CONFIG_X86_GENERIC=y - CONFIG_HPET_TIMER=y - CONFIG_SCHED_SMT=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y - CONFIG_X86_MCE=y - CONFIG_X86_REBOOTFIXUPS=y -diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig -index 4a4b16e56d35..7452dcadda74 100644 ---- a/arch/x86/configs/x86_64_defconfig -+++ b/arch/x86/configs/x86_64_defconfig -@@ -40,7 +40,7 @@ CONFIG_SMP=y - CONFIG_CALGARY_IOMMU=y - CONFIG_NR_CPUS=64 - CONFIG_SCHED_SMT=y --CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_PREEMPT=y - CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y - CONFIG_X86_MCE=y - CONFIG_MICROCODE=y -diff --git a/kernel/Kconfig.preempt b/kernel/Kconfig.preempt -index 3f9c97419f02..1dc79ec7ad09 100644 ---- a/kernel/Kconfig.preempt -+++ b/kernel/Kconfig.preempt -@@ -1,7 +1,7 @@ - - choice - prompt "Preemption Model" -- default PREEMPT_NONE -+ default PREEMPT - - config PREEMPT_NONE - bool "No Forced Preemption (Server)" -@@ -17,7 +17,7 @@ config PREEMPT_NONE - latencies. - - config PREEMPT_VOLUNTARY -- bool "Voluntary Kernel Preemption (Desktop)" -+ bool "Voluntary Kernel Preemption (Nothing)" - help - This option reduces the latency of the kernel by adding more - "explicit preemption points" to the kernel code. These new -@@ -31,7 +31,8 @@ config PREEMPT_VOLUNTARY - applications to run more 'smoothly' even when the system is - under load. - -- Select this if you are building a kernel for a desktop system. -+ Select this for no system in particular (choose Preemptible -+ instead on a desktop if you know what's good for you). - - config PREEMPT - bool "Preemptible Kernel (Low-Latency Desktop)" --- -2.11.0 - diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0003-Expose-vmsplit-for-our-poor-32-bit-users.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0003-Expose-vmsplit-for-our-poor-32-bit-users.patch deleted file mode 100644 index b7897dbe..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0003-Expose-vmsplit-for-our-poor-32-bit-users.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 44fc740a3ff85d378c28a416a076cc7e019d7b8c Mon Sep 17 00:00:00 2001 -From: Con Kolivas -Date: Fri, 12 May 2017 13:07:37 +1000 -Subject: [PATCH 03/16] Expose vmsplit for our poor 32 bit users. - ---- - arch/x86/Kconfig | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - -diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig -index e06a7b4e1dc4..931aba4fc567 100644 ---- a/arch/x86/Kconfig -+++ b/arch/x86/Kconfig -@@ -1361,7 +1361,7 @@ config HIGHMEM64G - endchoice - - choice -- prompt "Memory split" if EXPERT -+ prompt "Memory split" - default VMSPLIT_3G - depends on X86_32 - ---help--- -@@ -1381,17 +1381,17 @@ choice - option alone! - - config VMSPLIT_3G -- bool "3G/1G user/kernel split" -+ bool "Default 896MB lowmem (3G/1G user/kernel split)" - config VMSPLIT_3G_OPT - depends on !X86_PAE -- bool "3G/1G user/kernel split (for full 1G low memory)" -+ bool "1GB lowmem (3G/1G user/kernel split)" - config VMSPLIT_2G -- bool "2G/2G user/kernel split" -+ bool "2GB lowmem (2G/2G user/kernel split)" - config VMSPLIT_2G_OPT - depends on !X86_PAE -- bool "2G/2G user/kernel split (for full 2G low memory)" -+ bool "2GB lowmem (2G/2G user/kernel split)" - config VMSPLIT_1G -- bool "1G/3G user/kernel split" -+ bool "3GB lowmem (1G/3G user/kernel split)" - endchoice - - config PAGE_OFFSET --- -2.11.0 - diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0004-Create-highres-timeout-variants-of-schedule_timeout-.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0004-Create-highres-timeout-variants-of-schedule_timeout-.patch deleted file mode 100644 index 3c182fbe..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0004-Create-highres-timeout-variants-of-schedule_timeout-.patch +++ /dev/null @@ -1,153 +0,0 @@ -From d27b58b0707ac311be5a51594fc6f22ed1d109e5 Mon Sep 17 00:00:00 2001 -From: Con Kolivas -Date: Sat, 12 Aug 2017 11:53:39 +1000 -Subject: [PATCH 04/16] Create highres timeout variants of schedule_timeout - functions. - ---- - include/linux/freezer.h | 1 + - include/linux/sched.h | 31 +++++++++++++++++++-- - kernel/time/hrtimer.c | 71 +++++++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 101 insertions(+), 2 deletions(-) - -diff --git a/include/linux/freezer.h b/include/linux/freezer.h -index 3995df1d068f..f8645e8f2444 100644 ---- a/include/linux/freezer.h -+++ b/include/linux/freezer.h -@@ -297,6 +297,7 @@ static inline void set_freezable(void) {} - #define wait_event_freezekillable_unsafe(wq, condition) \ - wait_event_killable(wq, condition) - -+#define pm_freezing (false) - #endif /* !CONFIG_FREEZER */ - - #endif /* FREEZER_H_INCLUDED */ -diff --git a/include/linux/sched.h b/include/linux/sched.h -index 35dc91a0e2ed..38852ebfa864 100644 ---- a/include/linux/sched.h -+++ b/include/linux/sched.h -@@ -173,13 +173,40 @@ extern cpumask_var_t cpu_isolated_map; - - extern void scheduler_tick(void); - --#define MAX_SCHEDULE_TIMEOUT LONG_MAX -- -+#define MAX_SCHEDULE_TIMEOUT LONG_MAX - extern long schedule_timeout(long timeout); - extern long schedule_timeout_interruptible(long timeout); - extern long schedule_timeout_killable(long timeout); - extern long schedule_timeout_uninterruptible(long timeout); - extern long schedule_timeout_idle(long timeout); -+ -+#ifdef CONFIG_HIGH_RES_TIMERS -+extern long schedule_msec_hrtimeout(long timeout); -+extern long schedule_min_hrtimeout(void); -+extern long schedule_msec_hrtimeout_interruptible(long timeout); -+extern long schedule_msec_hrtimeout_uninterruptible(long timeout); -+#else -+static inline long schedule_msec_hrtimeout(long timeout) -+{ -+ return schedule_timeout(msecs_to_jiffies(timeout)); -+} -+ -+static inline long schedule_min_hrtimeout(void) -+{ -+ return schedule_timeout(1); -+} -+ -+static inline long schedule_msec_hrtimeout_interruptible(long timeout) -+{ -+ return schedule_timeout_interruptible(msecs_to_jiffies(timeout)); -+} -+ -+static inline long schedule_msec_hrtimeout_uninterruptible(long timeout) -+{ -+ return schedule_timeout_uninterruptible(msecs_to_jiffies(timeout)); -+} -+#endif -+ - asmlinkage void schedule(void); - extern void schedule_preempt_disabled(void); - -diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c -index 88f75f92ef36..13227cf2814c 100644 ---- a/kernel/time/hrtimer.c -+++ b/kernel/time/hrtimer.c -@@ -1787,3 +1787,74 @@ int __sched schedule_hrtimeout(ktime_t *expires, - return schedule_hrtimeout_range(expires, 0, mode); - } - EXPORT_SYMBOL_GPL(schedule_hrtimeout); -+ -+/* -+ * As per schedule_hrtimeout but taskes a millisecond value and returns how -+ * many milliseconds are left. -+ */ -+long __sched schedule_msec_hrtimeout(long timeout) -+{ -+ struct hrtimer_sleeper t; -+ int delta, secs, jiffs; -+ ktime_t expires; -+ -+ if (!timeout) { -+ __set_current_state(TASK_RUNNING); -+ return 0; -+ } -+ -+ jiffs = msecs_to_jiffies(timeout); -+ /* -+ * If regular timer resolution is adequate or hrtimer resolution is not -+ * (yet) better than Hz, as would occur during startup, use regular -+ * timers. -+ */ -+ if (jiffs > 4 || hrtimer_resolution >= NSEC_PER_SEC / HZ) -+ return schedule_timeout(jiffs); -+ -+ secs = timeout / 1000; -+ delta = (timeout % 1000) * NSEC_PER_MSEC; -+ expires = ktime_set(secs, delta); -+ -+ hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); -+ hrtimer_set_expires_range_ns(&t.timer, expires, delta); -+ -+ hrtimer_init_sleeper(&t, current); -+ -+ hrtimer_start_expires(&t.timer, HRTIMER_MODE_REL); -+ -+ if (likely(t.task)) -+ schedule(); -+ -+ hrtimer_cancel(&t.timer); -+ destroy_hrtimer_on_stack(&t.timer); -+ -+ __set_current_state(TASK_RUNNING); -+ -+ expires = hrtimer_expires_remaining(&t.timer); -+ timeout = ktime_to_ms(expires); -+ return timeout < 0 ? 0 : timeout; -+} -+ -+EXPORT_SYMBOL(schedule_msec_hrtimeout); -+ -+long __sched schedule_min_hrtimeout(void) -+{ -+ return schedule_msec_hrtimeout(1); -+} -+ -+EXPORT_SYMBOL(schedule_min_hrtimeout); -+ -+long __sched schedule_msec_hrtimeout_interruptible(long timeout) -+{ -+ __set_current_state(TASK_INTERRUPTIBLE); -+ return schedule_msec_hrtimeout(timeout); -+} -+EXPORT_SYMBOL(schedule_msec_hrtimeout_interruptible); -+ -+long __sched schedule_msec_hrtimeout_uninterruptible(long timeout) -+{ -+ __set_current_state(TASK_UNINTERRUPTIBLE); -+ return schedule_msec_hrtimeout(timeout); -+} -+EXPORT_SYMBOL(schedule_msec_hrtimeout_uninterruptible); --- -2.11.0 - diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0005-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0005-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch deleted file mode 100644 index 3c889719..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0005-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 5da7d1778b96c514394334c92de9b3d8d71f4a29 Mon Sep 17 00:00:00 2001 -From: Con Kolivas -Date: Sat, 5 Nov 2016 09:27:36 +1100 -Subject: [PATCH 05/16] Special case calls of schedule_timeout(1) to use the - min hrtimeout of 1ms, working around low Hz resolutions. - ---- - kernel/time/timer.c | 17 +++++++++++++++-- - 1 file changed, 15 insertions(+), 2 deletions(-) - -diff --git a/kernel/time/timer.c b/kernel/time/timer.c -index 9c18e16059a3..dd4d1b193286 100644 ---- a/kernel/time/timer.c -+++ b/kernel/time/timer.c -@@ -1741,6 +1741,19 @@ signed long __sched schedule_timeout(signed long timeout) - - expire = timeout + jiffies; - -+#ifdef CONFIG_HIGH_RES_TIMERS -+ if (timeout == 1 && hrtimer_resolution < NSEC_PER_SEC / HZ) { -+ /* -+ * Special case 1 as being a request for the minimum timeout -+ * and use highres timers to timeout after 1ms to workaround -+ * the granularity of low Hz tick timers. -+ */ -+ if (!schedule_min_hrtimeout()) -+ return 0; -+ goto out_timeout; -+ } -+#endif -+ - setup_timer_on_stack(&timer, process_timeout, (unsigned long)current); - __mod_timer(&timer, expire, false); - schedule(); -@@ -1748,10 +1761,10 @@ signed long __sched schedule_timeout(signed long timeout) - - /* Remove the timer from the object tracker */ - destroy_timer_on_stack(&timer); -- -+out_timeout: - timeout = expire - jiffies; - -- out: -+out: - return timeout < 0 ? 0 : timeout; - } - EXPORT_SYMBOL(schedule_timeout); --- -2.11.0 - diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0006-Convert-msleep-to-use-hrtimers-when-active.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0006-Convert-msleep-to-use-hrtimers-when-active.patch deleted file mode 100644 index 2f065652..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0006-Convert-msleep-to-use-hrtimers-when-active.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 9df803c28bb8ccb2588c0ccaf857b9e673175fed Mon Sep 17 00:00:00 2001 -From: Con Kolivas -Date: Fri, 4 Nov 2016 09:25:54 +1100 -Subject: [PATCH 06/16] Convert msleep to use hrtimers when active. - ---- - kernel/time/timer.c | 24 ++++++++++++++++++++++-- - 1 file changed, 22 insertions(+), 2 deletions(-) - -diff --git a/kernel/time/timer.c b/kernel/time/timer.c -index dd4d1b193286..c68cb9307f64 100644 ---- a/kernel/time/timer.c -+++ b/kernel/time/timer.c -@@ -1884,7 +1884,19 @@ void __init init_timers(void) - */ - void msleep(unsigned int msecs) - { -- unsigned long timeout = msecs_to_jiffies(msecs) + 1; -+ int jiffs = msecs_to_jiffies(msecs); -+ unsigned long timeout; -+ -+ /* -+ * Use high resolution timers where the resolution of tick based -+ * timers is inadequate. -+ */ -+ if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ) { -+ while (msecs) -+ msecs = schedule_msec_hrtimeout_uninterruptible(msecs); -+ return; -+ } -+ timeout = msecs_to_jiffies(msecs) + 1; - - while (timeout) - timeout = schedule_timeout_uninterruptible(timeout); -@@ -1898,7 +1910,15 @@ EXPORT_SYMBOL(msleep); - */ - unsigned long msleep_interruptible(unsigned int msecs) - { -- unsigned long timeout = msecs_to_jiffies(msecs) + 1; -+ int jiffs = msecs_to_jiffies(msecs); -+ unsigned long timeout; -+ -+ if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ) { -+ while (msecs && !signal_pending(current)) -+ msecs = schedule_msec_hrtimeout_interruptible(msecs); -+ return msecs; -+ } -+ timeout = msecs_to_jiffies(msecs) + 1; - - while (timeout && !signal_pending(current)) - timeout = schedule_timeout_interruptible(timeout); --- -2.11.0 - diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0007-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0007-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch deleted file mode 100644 index ff071da8..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0007-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch +++ /dev/null @@ -1,529 +0,0 @@ -diff -Nur a/drivers/block/swim.c b/drivers/block/swim.c ---- a/drivers/block/swim.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/block/swim.c 2018-11-03 16:30:39.471807304 +0000 -@@ -332,7 +332,7 @@ - if (swim_readbit(base, MOTOR_ON)) - break; - current->state = TASK_INTERRUPTIBLE; -- schedule_timeout(1); -+ schedule_min_hrtimeout(); - } - } else if (action == OFF) { - swim_action(base, MOTOR_OFF); -@@ -351,7 +351,7 @@ - if (!swim_readbit(base, DISK_IN)) - break; - current->state = TASK_INTERRUPTIBLE; -- schedule_timeout(1); -+ schedule_min_hrtimeout(); - } - swim_select(base, RELAX); - } -@@ -375,7 +375,7 @@ - for (wait = 0; wait < HZ; wait++) { - - current->state = TASK_INTERRUPTIBLE; -- schedule_timeout(1); -+ schedule_min_hrtimeout(); - - swim_select(base, RELAX); - if (!swim_readbit(base, STEP)) -diff -Nur a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c ---- a/drivers/bluetooth/hci_qca.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/bluetooth/hci_qca.c 2018-11-03 16:31:56.065260061 +0000 -@@ -880,7 +880,7 @@ - * then host can communicate with new baudrate to controller - */ - set_current_state(TASK_UNINTERRUPTIBLE); -- schedule_timeout(msecs_to_jiffies(BAUDRATE_SETTLE_TIMEOUT_MS)); -+ schedule_msec_hrtimeout((BAUDRATE_SETTLE_TIMEOUT_MS)); - set_current_state(TASK_RUNNING); - - return 0; -diff -Nur a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c ---- a/drivers/char/ipmi/ipmi_msghandler.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/char/ipmi/ipmi_msghandler.c 2018-11-03 16:30:39.473807368 +0000 -@@ -2953,7 +2953,7 @@ - /* Current message first, to preserve order */ - while (intf->curr_msg && !list_empty(&intf->waiting_rcv_msgs)) { - /* Wait for the message to clear out. */ -- schedule_timeout(1); -+ schedule_min_hrtimeout(); - } - - /* No need for locks, the interface is down. */ -diff -Nur a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c ---- a/drivers/char/ipmi/ipmi_ssif.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/char/ipmi/ipmi_ssif.c 2018-11-03 16:30:39.473807368 +0000 -@@ -1200,7 +1200,7 @@ - - /* make sure the driver is not looking for flags any more. */ - while (ssif_info->ssif_state != SSIF_NORMAL) -- schedule_timeout(1); -+ schedule_min_hrtimeout(); - - ssif_info->stopping = true; - del_timer_sync(&ssif_info->retry_timer); -diff -Nur a/drivers/char/snsc.c b/drivers/char/snsc.c ---- a/drivers/char/snsc.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/char/snsc.c 2018-11-03 16:30:39.474807400 +0000 -@@ -198,7 +198,7 @@ - add_wait_queue(&sd->sd_rq, &wait); - spin_unlock_irqrestore(&sd->sd_rlock, flags); - -- schedule_timeout(msecs_to_jiffies(SCDRV_TIMEOUT)); -+ schedule_msec_hrtimeout((SCDRV_TIMEOUT)); - - remove_wait_queue(&sd->sd_rq, &wait); - if (signal_pending(current)) { -@@ -294,7 +294,7 @@ - add_wait_queue(&sd->sd_wq, &wait); - spin_unlock_irqrestore(&sd->sd_wlock, flags); - -- schedule_timeout(msecs_to_jiffies(SCDRV_TIMEOUT)); -+ schedule_msec_hrtimeout((SCDRV_TIMEOUT)); - - remove_wait_queue(&sd->sd_wq, &wait); - if (signal_pending(current)) { -diff -Nur a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c ---- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c 2018-11-03 16:30:39.474807400 +0000 -@@ -235,7 +235,7 @@ - DRM_ERROR("SVGA device lockup.\n"); - break; - } -- schedule_timeout(1); -+ schedule_min_hrtimeout(); - if (interruptible && signal_pending(current)) { - ret = -ERESTARTSYS; - break; -diff -Nur a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c ---- a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c 2018-11-03 16:30:39.474807400 +0000 -@@ -202,7 +202,7 @@ - break; - } - if (lazy) -- schedule_timeout(1); -+ schedule_min_hrtimeout(); - else if ((++count & 0x0F) == 0) { - /** - * FIXME: Use schedule_hr_timeout here for -diff -Nur a/drivers/media/pci/ivtv/ivtv-ioctl.c b/drivers/media/pci/ivtv/ivtv-ioctl.c ---- a/drivers/media/pci/ivtv/ivtv-ioctl.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/media/pci/ivtv/ivtv-ioctl.c 2018-11-03 16:30:39.475807432 +0000 -@@ -1154,7 +1154,7 @@ - TASK_UNINTERRUPTIBLE); - if ((read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16) < 100) - break; -- schedule_timeout(msecs_to_jiffies(25)); -+ schedule_msec_hrtimeout((25)); - } - finish_wait(&itv->vsync_waitq, &wait); - mutex_lock(&itv->serialize_lock); -diff -Nur a/drivers/media/pci/ivtv/ivtv-streams.c b/drivers/media/pci/ivtv/ivtv-streams.c ---- a/drivers/media/pci/ivtv/ivtv-streams.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/media/pci/ivtv/ivtv-streams.c 2018-11-03 16:30:39.475807432 +0000 -@@ -834,7 +834,7 @@ - while (!test_bit(IVTV_F_I_EOS, &itv->i_flags) && - time_before(jiffies, - then + msecs_to_jiffies(2000))) { -- schedule_timeout(msecs_to_jiffies(10)); -+ schedule_msec_hrtimeout((10)); - } - - /* To convert jiffies to ms, we must multiply by 1000 -diff -Nur a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c ---- a/drivers/mfd/ucb1x00-core.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/mfd/ucb1x00-core.c 2018-11-03 16:30:39.476807464 +0000 -@@ -253,7 +253,7 @@ - break; - /* yield to other processes */ - set_current_state(TASK_INTERRUPTIBLE); -- schedule_timeout(1); -+ schedule_min_hrtimeout(); - } - - return UCB_ADC_DAT(val); -diff -Nur a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c ---- a/drivers/misc/sgi-xp/xpc_channel.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/misc/sgi-xp/xpc_channel.c 2018-11-03 16:30:39.476807464 +0000 -@@ -837,7 +837,7 @@ - - atomic_inc(&ch->n_on_msg_allocate_wq); - prepare_to_wait(&ch->msg_allocate_wq, &wait, TASK_INTERRUPTIBLE); -- ret = schedule_timeout(1); -+ ret = schedule_min_hrtimeout(); - finish_wait(&ch->msg_allocate_wq, &wait); - atomic_dec(&ch->n_on_msg_allocate_wq); - -diff -Nur a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c ---- a/drivers/net/caif/caif_hsi.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/net/caif/caif_hsi.c 2018-11-03 16:30:39.477807497 +0000 -@@ -940,7 +940,7 @@ - break; - - set_current_state(TASK_INTERRUPTIBLE); -- schedule_timeout(1); -+ schedule_min_hrtimeout(); - retry--; - } - -diff -Nur a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c ---- a/drivers/net/can/usb/peak_usb/pcan_usb.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/net/can/usb/peak_usb/pcan_usb.c 2018-11-03 16:30:39.477807497 +0000 -@@ -250,7 +250,7 @@ - } else { - /* the PCAN-USB needs time to init */ - set_current_state(TASK_INTERRUPTIBLE); -- schedule_timeout(msecs_to_jiffies(PCAN_USB_STARTUP_TIMEOUT)); -+ schedule_msec_hrtimeout((PCAN_USB_STARTUP_TIMEOUT)); - } - - return err; -diff -Nur a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c ---- a/drivers/net/usb/lan78xx.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/net/usb/lan78xx.c 2018-11-03 16:30:39.478807529 +0000 -@@ -2567,7 +2567,7 @@ - while (!skb_queue_empty(&dev->rxq) && - !skb_queue_empty(&dev->txq) && - !skb_queue_empty(&dev->done)) { -- schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS)); -+ schedule_msec_hrtimeout((UNLINK_TIMEOUT_MS)); - set_current_state(TASK_UNINTERRUPTIBLE); - netif_dbg(dev, ifdown, dev->net, - "waited for %d urb completions\n", temp); -diff -Nur a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c ---- a/drivers/net/usb/usbnet.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/net/usb/usbnet.c 2018-11-03 16:30:39.479807561 +0000 -@@ -772,7 +772,7 @@ - spin_lock_irqsave(&q->lock, flags); - while (!skb_queue_empty(q)) { - spin_unlock_irqrestore(&q->lock, flags); -- schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS)); -+ schedule_msec_hrtimeout((UNLINK_TIMEOUT_MS)); - set_current_state(TASK_UNINTERRUPTIBLE); - spin_lock_irqsave(&q->lock, flags); - } -diff -Nur a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c ---- a/drivers/ntb/test/ntb_perf.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/ntb/test/ntb_perf.c 2018-11-03 16:30:39.479807561 +0000 -@@ -310,7 +310,7 @@ - if (unlikely((jiffies - last_sleep) > 5 * HZ)) { - last_sleep = jiffies; - set_current_state(TASK_INTERRUPTIBLE); -- schedule_timeout(1); -+ schedule_min_hrtimeout(); - } - - if (unlikely(kthread_should_stop())) -diff -Nur a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c ---- a/drivers/scsi/fnic/fnic_scsi.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/scsi/fnic/fnic_scsi.c 2018-11-03 16:30:39.480807592 +0000 -@@ -217,7 +217,7 @@ - - /* wait for io cmpl */ - while (atomic_read(&fnic->in_flight)) -- schedule_timeout(msecs_to_jiffies(1)); -+ schedule_msec_hrtimeout((1)); - - spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); - -@@ -2255,7 +2255,7 @@ - } - } - -- schedule_timeout(msecs_to_jiffies(2 * fnic->config.ed_tov)); -+ schedule_msec_hrtimeout((2 * fnic->config.ed_tov)); - - /* walk again to check, if IOs are still pending in fw */ - if (fnic_is_abts_pending(fnic, lr_sc)) -diff -Nur a/drivers/scsi/snic/snic_scsi.c b/drivers/scsi/snic/snic_scsi.c ---- a/drivers/scsi/snic/snic_scsi.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/scsi/snic/snic_scsi.c 2018-11-03 16:30:39.481807625 +0000 -@@ -2354,7 +2354,7 @@ - - /* Wait for all the IOs that are entered in Qcmd */ - while (atomic_read(&snic->ios_inflight)) -- schedule_timeout(msecs_to_jiffies(1)); -+ schedule_msec_hrtimeout((1)); - - ret = snic_issue_hba_reset(snic, sc); - if (ret) { -diff -Nur a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c ---- a/drivers/staging/comedi/drivers/ni_mio_common.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/staging/comedi/drivers/ni_mio_common.c 2018-11-03 16:30:39.483807688 +0000 -@@ -4657,7 +4657,7 @@ - if ((status & NI67XX_CAL_STATUS_BUSY) == 0) - break; - set_current_state(TASK_INTERRUPTIBLE); -- if (schedule_timeout(1)) -+ if (schedule_min_hrtimeout()) - return -EIO; - } - if (i == timeout) { -diff -Nur a/drivers/staging/lustre/lnet/lnet/lib-eq.c b/drivers/staging/lustre/lnet/lnet/lib-eq.c ---- a/drivers/staging/lustre/lnet/lnet/lib-eq.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/staging/lustre/lnet/lnet/lib-eq.c 2018-11-03 16:30:39.483807688 +0000 -@@ -329,7 +329,7 @@ - schedule(); - } else { - now = jiffies; -- schedule_timeout(msecs_to_jiffies(tms)); -+ schedule_msec_hrtimeout((tms)); - tms -= jiffies_to_msecs(jiffies - now); - if (tms < 0) /* no more wait but may have new event */ - tms = 0; -diff -Nur a/drivers/staging/rts5208/rtsx.c b/drivers/staging/rts5208/rtsx.c ---- a/drivers/staging/rts5208/rtsx.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/staging/rts5208/rtsx.c 2018-11-03 16:30:39.483807688 +0000 -@@ -524,7 +524,7 @@ - - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); -- schedule_timeout(msecs_to_jiffies(POLLING_INTERVAL)); -+ schedule_msec_hrtimeout((POLLING_INTERVAL)); - - /* lock the device pointers */ - mutex_lock(&dev->dev_mutex); -diff -Nur a/drivers/staging/speakup/speakup_acntpc.c b/drivers/staging/speakup/speakup_acntpc.c ---- a/drivers/staging/speakup/speakup_acntpc.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/staging/speakup/speakup_acntpc.c 2018-11-03 16:30:39.484807721 +0000 -@@ -206,7 +206,7 @@ - full_time_val = full_time->u.n.value; - spin_unlock_irqrestore(&speakup_info.spinlock, flags); - if (synth_full()) { -- schedule_timeout(msecs_to_jiffies(full_time_val)); -+ schedule_msec_hrtimeout((full_time_val)); - continue; - } - set_current_state(TASK_RUNNING); -@@ -234,7 +234,7 @@ - jiffy_delta_val = jiffy_delta->u.n.value; - delay_time_val = delay_time->u.n.value; - spin_unlock_irqrestore(&speakup_info.spinlock, flags); -- schedule_timeout(msecs_to_jiffies(delay_time_val)); -+ schedule_msec_hrtimeout(delay_time_val); - jiff_max = jiffies + jiffy_delta_val; - } - } -diff -Nur a/drivers/staging/speakup/speakup_apollo.c b/drivers/staging/speakup/speakup_apollo.c ---- a/drivers/staging/speakup/speakup_apollo.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/staging/speakup/speakup_apollo.c 2018-11-03 16:30:39.484807721 +0000 -@@ -174,7 +174,7 @@ - if (!synth->io_ops->synth_out(synth, ch)) { - synth->io_ops->tiocmset(0, UART_MCR_RTS); - synth->io_ops->tiocmset(UART_MCR_RTS, 0); -- schedule_timeout(msecs_to_jiffies(full_time_val)); -+ schedule_msec_hrtimeout(full_time_val); - continue; - } - if (time_after_eq(jiffies, jiff_max) && (ch == SPACE)) { -diff -Nur a/drivers/staging/speakup/speakup_decext.c b/drivers/staging/speakup/speakup_decext.c ---- a/drivers/staging/speakup/speakup_decext.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/staging/speakup/speakup_decext.c 2018-11-03 16:30:39.484807721 +0000 -@@ -185,7 +185,7 @@ - if (ch == '\n') - ch = 0x0D; - if (synth_full() || !synth->io_ops->synth_out(synth, ch)) { -- schedule_timeout(msecs_to_jiffies(delay_time_val)); -+ schedule_msec_hrtimeout(delay_time_val); - continue; - } - set_current_state(TASK_RUNNING); -diff -Nur a/drivers/staging/speakup/speakup_decpc.c b/drivers/staging/speakup/speakup_decpc.c ---- a/drivers/staging/speakup/speakup_decpc.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/staging/speakup/speakup_decpc.c 2018-11-03 16:30:39.484807721 +0000 -@@ -403,7 +403,7 @@ - if (ch == '\n') - ch = 0x0D; - if (dt_sendchar(ch)) { -- schedule_timeout(msecs_to_jiffies(delay_time_val)); -+ schedule_msec_hrtimeout((delay_time_val)); - continue; - } - set_current_state(TASK_RUNNING); -diff -Nur a/drivers/staging/speakup/speakup_dectlk.c b/drivers/staging/speakup/speakup_dectlk.c ---- a/drivers/staging/speakup/speakup_dectlk.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/staging/speakup/speakup_dectlk.c 2018-11-03 16:30:39.485807753 +0000 -@@ -253,7 +253,7 @@ - if (ch == '\n') - ch = 0x0D; - if (synth_full_val || !synth->io_ops->synth_out(synth, ch)) { -- schedule_timeout(msecs_to_jiffies(delay_time_val)); -+ schedule_msec_hrtimeout(delay_time_val); - continue; - } - set_current_state(TASK_RUNNING); -diff -Nur a/drivers/staging/speakup/speakup_dtlk.c b/drivers/staging/speakup/speakup_dtlk.c ---- a/drivers/staging/speakup/speakup_dtlk.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/staging/speakup/speakup_dtlk.c 2018-11-03 16:30:39.485807753 +0000 -@@ -220,7 +220,7 @@ - delay_time_val = delay_time->u.n.value; - spin_unlock_irqrestore(&speakup_info.spinlock, flags); - if (synth_full()) { -- schedule_timeout(msecs_to_jiffies(delay_time_val)); -+ schedule_msec_hrtimeout((delay_time_val)); - continue; - } - set_current_state(TASK_RUNNING); -@@ -236,7 +236,7 @@ - delay_time_val = delay_time->u.n.value; - jiffy_delta_val = jiffy_delta->u.n.value; - spin_unlock_irqrestore(&speakup_info.spinlock, flags); -- schedule_timeout(msecs_to_jiffies(delay_time_val)); -+ schedule_msec_hrtimeout((delay_time_val)); - jiff_max = jiffies + jiffy_delta_val; - } - } -diff -Nur a/drivers/staging/speakup/speakup_keypc.c b/drivers/staging/speakup/speakup_keypc.c ---- a/drivers/staging/speakup/speakup_keypc.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/staging/speakup/speakup_keypc.c 2018-11-03 16:30:39.485807753 +0000 -@@ -208,7 +208,7 @@ - full_time_val = full_time->u.n.value; - spin_unlock_irqrestore(&speakup_info.spinlock, flags); - if (synth_full()) { -- schedule_timeout(msecs_to_jiffies(full_time_val)); -+ schedule_msec_hrtimeout((full_time_val)); - continue; - } - set_current_state(TASK_RUNNING); -@@ -241,7 +241,7 @@ - jiffy_delta_val = jiffy_delta->u.n.value; - delay_time_val = delay_time->u.n.value; - spin_unlock_irqrestore(&speakup_info.spinlock, flags); -- schedule_timeout(msecs_to_jiffies(delay_time_val)); -+ schedule_msec_hrtimeout((delay_time_val)); - jiff_max = jiffies+jiffy_delta_val; - } - } -diff -Nur a/drivers/staging/speakup/synth.c b/drivers/staging/speakup/synth.c ---- a/drivers/staging/speakup/synth.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/staging/speakup/synth.c 2018-11-03 16:30:39.486807785 +0000 -@@ -92,7 +92,7 @@ - if (ch == '\n') - ch = synth->procspeech; - if (!synth->io_ops->synth_out(synth, ch)) { -- schedule_timeout(msecs_to_jiffies(full_time_val)); -+ schedule_msec_hrtimeout(full_time_val); - continue; - } - if (time_after_eq(jiffies, jiff_max) && (ch == SPACE)) { -diff -Nur a/drivers/staging/unisys/visornic/visornic_main.c b/drivers/staging/unisys/visornic/visornic_main.c ---- a/drivers/staging/unisys/visornic/visornic_main.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/staging/unisys/visornic/visornic_main.c 2018-11-03 16:30:39.486807785 +0000 -@@ -556,7 +556,7 @@ - } - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&devdata->priv_lock, flags); -- wait += schedule_timeout(msecs_to_jiffies(10)); -+ wait += schedule_msec_hrtimeout((10)); - spin_lock_irqsave(&devdata->priv_lock, flags); - } - -@@ -567,7 +567,7 @@ - while (1) { - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&devdata->priv_lock, flags); -- schedule_timeout(msecs_to_jiffies(10)); -+ schedule_msec_hrtimeout((10)); - spin_lock_irqsave(&devdata->priv_lock, flags); - if (atomic_read(&devdata->usage)) - break; -@@ -721,7 +721,7 @@ - } - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&devdata->priv_lock, flags); -- wait += schedule_timeout(msecs_to_jiffies(10)); -+ wait += schedule_msec_hrtimeout((10)); - spin_lock_irqsave(&devdata->priv_lock, flags); - } - -diff -Nur a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c ---- a/drivers/target/target_core_user.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/target/target_core_user.c 2018-11-03 16:30:39.487807817 +0000 -@@ -808,10 +808,9 @@ - pr_debug("sleeping for ring space\n"); - mutex_unlock(&udev->cmdr_lock); - if (udev->cmd_time_out) -- ret = schedule_timeout( -- msecs_to_jiffies(udev->cmd_time_out)); -+ ret = schedule_msec_hrtimeout(udev->cmd_time_out); - else -- ret = schedule_timeout(msecs_to_jiffies(TCMU_TIME_OUT)); -+ ret = schedule_msec_hrtimeout(TCMU_TIME_OUT); - finish_wait(&udev->wait_cmdr, &__wait); - if (!ret) { - pr_warn("tcmu: command timed out\n"); -diff -Nur a/drivers/video/fbdev/omap/hwa742.c b/drivers/video/fbdev/omap/hwa742.c ---- a/drivers/video/fbdev/omap/hwa742.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/video/fbdev/omap/hwa742.c 2018-11-03 16:30:39.487807817 +0000 -@@ -926,7 +926,7 @@ - if (hwa742_read_reg(HWA742_PLL_DIV_REG) & (1 << 7)) - break; - set_current_state(TASK_UNINTERRUPTIBLE); -- schedule_timeout(msecs_to_jiffies(5)); -+ schedule_msec_hrtimeout((5)); - } - hwa742_set_update_mode(hwa742.update_mode_before_suspend); - } -diff -Nur a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c ---- a/drivers/video/fbdev/pxafb.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/drivers/video/fbdev/pxafb.c 2018-11-03 16:30:39.488807849 +0000 -@@ -1286,7 +1286,7 @@ - mutex_unlock(&fbi->ctrlr_lock); - - set_current_state(TASK_INTERRUPTIBLE); -- schedule_timeout(msecs_to_jiffies(30)); -+ schedule_msec_hrtimeout((30)); - } - - pr_debug("%s(): task ending\n", __func__); -diff -Nur a/fs/afs/vlocation.c b/fs/afs/vlocation.c ---- a/fs/afs/vlocation.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/fs/afs/vlocation.c 2018-11-03 16:30:39.488807849 +0000 -@@ -129,7 +129,7 @@ - if (vl->upd_busy_cnt > 1) { - /* second+ BUSY - sleep a little bit */ - set_current_state(TASK_UNINTERRUPTIBLE); -- schedule_timeout(1); -+ schedule_min_hrtimeout(); - } - continue; - } -diff -Nur a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c ---- a/fs/btrfs/extent-tree.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/fs/btrfs/extent-tree.c 2018-11-03 16:30:39.491807945 +0000 -@@ -6106,7 +6106,7 @@ - - if (flush != BTRFS_RESERVE_NO_FLUSH && - btrfs_transaction_in_commit(fs_info)) -- schedule_timeout(1); -+ schedule_min_hrtimeout(); - - if (delalloc_lock) - mutex_lock(&inode->delalloc_mutex); -diff -Nur a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c ---- a/fs/btrfs/inode-map.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/fs/btrfs/inode-map.c 2018-11-03 16:30:39.492807977 +0000 -@@ -89,7 +89,7 @@ - btrfs_release_path(path); - root->ino_cache_progress = last; - up_read(&fs_info->commit_root_sem); -- schedule_timeout(1); -+ schedule_min_hrtimeout(); - goto again; - } else - continue; -diff -Nur a/sound/usb/line6/pcm.c b/sound/usb/line6/pcm.c ---- a/sound/usb/line6/pcm.c 2018-10-10 07:54:28.000000000 +0100 -+++ b/sound/usb/line6/pcm.c 2018-11-03 16:30:39.492807977 +0000 -@@ -131,7 +131,7 @@ - if (!alive) - break; - set_current_state(TASK_UNINTERRUPTIBLE); -- schedule_timeout(1); -+ schedule_min_hrtimeout(); - } while (--timeout > 0); - if (alive) - dev_err(line6pcm->line6->ifcdev, diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0008-Replace-all-calls-to-schedule_timeout_interruptible-.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0008-Replace-all-calls-to-schedule_timeout_interruptible-.patch deleted file mode 100644 index f9f274ce..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0008-Replace-all-calls-to-schedule_timeout_interruptible-.patch +++ /dev/null @@ -1,311 +0,0 @@ -From 3ef5df78c2f425115b87f0f2f59fd189c0f1bbe3 Mon Sep 17 00:00:00 2001 -From: Con Kolivas -Date: Mon, 20 Feb 2017 13:30:07 +1100 -Subject: [PATCH 08/16] Replace all calls to schedule_timeout_interruptible of - potentially under 50ms to use schedule_msec_hrtimeout_interruptible. - ---- - drivers/hwmon/fam15h_power.c | 2 +- - drivers/iio/light/tsl2563.c | 6 +----- - drivers/media/i2c/msp3400-driver.c | 4 ++-- - drivers/media/pci/ivtv/ivtv-gpio.c | 6 +++--- - drivers/media/radio/radio-mr800.c | 2 +- - drivers/media/radio/radio-tea5777.c | 2 +- - drivers/media/radio/tea575x.c | 2 +- - drivers/parport/ieee1284.c | 2 +- - drivers/parport/ieee1284_ops.c | 2 +- - drivers/platform/x86/intel_ips.c | 8 ++++---- - net/core/pktgen.c | 2 +- - sound/soc/codecs/wm8350.c | 12 ++++++------ - sound/soc/codecs/wm8900.c | 2 +- - sound/soc/codecs/wm9713.c | 4 ++-- - 14 files changed, 26 insertions(+), 30 deletions(-) - -diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c -index 9545a346044f..c24cf1302ec7 100644 ---- a/drivers/hwmon/fam15h_power.c -+++ b/drivers/hwmon/fam15h_power.c -@@ -237,7 +237,7 @@ static ssize_t power1_average_show(struct device *dev, - prev_ptsc[cu] = data->cpu_sw_pwr_ptsc[cu]; - } - -- leftover = schedule_timeout_interruptible(msecs_to_jiffies(data->power_period)); -+ leftover = schedule_msec_hrtimeout_interruptible((data->power_period)); - if (leftover) - return 0; - -diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c -index 7599693f7fe9..452090739138 100644 ---- a/drivers/iio/light/tsl2563.c -+++ b/drivers/iio/light/tsl2563.c -@@ -282,11 +282,7 @@ static void tsl2563_wait_adc(struct tsl2563_chip *chip) - default: - delay = 402; - } -- /* -- * TODO: Make sure that we wait at least required delay but why we -- * have to extend it one tick more? -- */ -- schedule_timeout_interruptible(msecs_to_jiffies(delay) + 2); -+ schedule_msec_hrtimeout_interruptible(delay + 1); - } - - static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc) -diff --git a/drivers/media/i2c/msp3400-driver.c b/drivers/media/i2c/msp3400-driver.c -index 3db966db83eb..f0fab7676f72 100644 ---- a/drivers/media/i2c/msp3400-driver.c -+++ b/drivers/media/i2c/msp3400-driver.c -@@ -179,7 +179,7 @@ static int msp_read(struct i2c_client *client, int dev, int addr) - break; - dev_warn(&client->dev, "I/O error #%d (read 0x%02x/0x%02x)\n", err, - dev, addr); -- schedule_timeout_interruptible(msecs_to_jiffies(10)); -+ schedule_msec_hrtimeout_interruptible((10)); - } - if (err == 3) { - dev_warn(&client->dev, "resetting chip, sound will go off.\n"); -@@ -220,7 +220,7 @@ static int msp_write(struct i2c_client *client, int dev, int addr, int val) - break; - dev_warn(&client->dev, "I/O error #%d (write 0x%02x/0x%02x)\n", err, - dev, addr); -- schedule_timeout_interruptible(msecs_to_jiffies(10)); -+ schedule_msec_hrtimeout_interruptible((10)); - } - if (err == 3) { - dev_warn(&client->dev, "resetting chip, sound will go off.\n"); -diff --git a/drivers/media/pci/ivtv/ivtv-gpio.c b/drivers/media/pci/ivtv/ivtv-gpio.c -index f752f3993687..23372af61ebf 100644 ---- a/drivers/media/pci/ivtv/ivtv-gpio.c -+++ b/drivers/media/pci/ivtv/ivtv-gpio.c -@@ -117,7 +117,7 @@ void ivtv_reset_ir_gpio(struct ivtv *itv) - curout = (curout & ~0xF) | 1; - write_reg(curout, IVTV_REG_GPIO_OUT); - /* We could use something else for smaller time */ -- schedule_timeout_interruptible(msecs_to_jiffies(1)); -+ schedule_msec_hrtimeout_interruptible((1)); - curout |= 2; - write_reg(curout, IVTV_REG_GPIO_OUT); - curdir &= ~0x80; -@@ -137,11 +137,11 @@ int ivtv_reset_tuner_gpio(void *dev, int component, int cmd, int value) - curout = read_reg(IVTV_REG_GPIO_OUT); - curout &= ~(1 << itv->card->xceive_pin); - write_reg(curout, IVTV_REG_GPIO_OUT); -- schedule_timeout_interruptible(msecs_to_jiffies(1)); -+ schedule_msec_hrtimeout_interruptible((1)); - - curout |= 1 << itv->card->xceive_pin; - write_reg(curout, IVTV_REG_GPIO_OUT); -- schedule_timeout_interruptible(msecs_to_jiffies(1)); -+ schedule_msec_hrtimeout_interruptible((1)); - return 0; - } - -diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c -index c9f59129af79..cb6f8394a5c2 100644 ---- a/drivers/media/radio/radio-mr800.c -+++ b/drivers/media/radio/radio-mr800.c -@@ -378,7 +378,7 @@ static int vidioc_s_hw_freq_seek(struct file *file, void *priv, - retval = -ENODATA; - break; - } -- if (schedule_timeout_interruptible(msecs_to_jiffies(10))) { -+ if (schedule_msec_hrtimeout_interruptible((10))) { - retval = -ERESTARTSYS; - break; - } -diff --git a/drivers/media/radio/radio-tea5777.c b/drivers/media/radio/radio-tea5777.c -index 04ed1a5d1177..d593d28dc286 100644 ---- a/drivers/media/radio/radio-tea5777.c -+++ b/drivers/media/radio/radio-tea5777.c -@@ -245,7 +245,7 @@ static int radio_tea5777_update_read_reg(struct radio_tea5777 *tea, int wait) - } - - if (wait) { -- if (schedule_timeout_interruptible(msecs_to_jiffies(wait))) -+ if (schedule_msec_hrtimeout_interruptible((wait))) - return -ERESTARTSYS; - } - -diff --git a/drivers/media/radio/tea575x.c b/drivers/media/radio/tea575x.c -index 4dc2067bce14..29f4416fb9ae 100644 ---- a/drivers/media/radio/tea575x.c -+++ b/drivers/media/radio/tea575x.c -@@ -416,7 +416,7 @@ int snd_tea575x_s_hw_freq_seek(struct file *file, struct snd_tea575x *tea, - for (;;) { - if (time_after(jiffies, timeout)) - break; -- if (schedule_timeout_interruptible(msecs_to_jiffies(10))) { -+ if (schedule_msec_hrtimeout_interruptible((10))) { - /* some signal arrived, stop search */ - tea->val &= ~TEA575X_BIT_SEARCH; - snd_tea575x_set_freq(tea); -diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c -index 74cc6dd982d2..c22c4d5f08d0 100644 ---- a/drivers/parport/ieee1284.c -+++ b/drivers/parport/ieee1284.c -@@ -215,7 +215,7 @@ int parport_wait_peripheral(struct parport *port, - /* parport_wait_event didn't time out, but the - * peripheral wasn't actually ready either. - * Wait for another 10ms. */ -- schedule_timeout_interruptible(msecs_to_jiffies(10)); -+ schedule_msec_hrtimeout_interruptible((10)); - } - } - -diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c -index 5d41dda6da4e..34705f6b423f 100644 ---- a/drivers/parport/ieee1284_ops.c -+++ b/drivers/parport/ieee1284_ops.c -@@ -537,7 +537,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port, - /* Yield the port for a while. */ - if (count && dev->port->irq != PARPORT_IRQ_NONE) { - parport_release (dev); -- schedule_timeout_interruptible(msecs_to_jiffies(40)); -+ schedule_msec_hrtimeout_interruptible((40)); - parport_claim_or_block (dev); - } - else -diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c -index 58dcee562d64..b661b7c071bb 100644 ---- a/drivers/platform/x86/intel_ips.c -+++ b/drivers/platform/x86/intel_ips.c -@@ -813,7 +813,7 @@ static int ips_adjust(void *data) - ips_gpu_lower(ips); - - sleep: -- schedule_timeout_interruptible(msecs_to_jiffies(IPS_ADJUST_PERIOD)); -+ schedule_msec_hrtimeout_interruptible((IPS_ADJUST_PERIOD)); - } while (!kthread_should_stop()); - - dev_dbg(&ips->dev->dev, "ips-adjust thread stopped\n"); -@@ -992,7 +992,7 @@ static int ips_monitor(void *data) - seqno_timestamp = get_jiffies_64(); - - old_cpu_power = thm_readl(THM_CEC); -- schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD)); -+ schedule_msec_hrtimeout_interruptible((IPS_SAMPLE_PERIOD)); - - /* Collect an initial average */ - for (i = 0; i < IPS_SAMPLE_COUNT; i++) { -@@ -1019,7 +1019,7 @@ static int ips_monitor(void *data) - mchp_samples[i] = mchp; - } - -- schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD)); -+ schedule_msec_hrtimeout_interruptible((IPS_SAMPLE_PERIOD)); - if (kthread_should_stop()) - break; - } -@@ -1046,7 +1046,7 @@ static int ips_monitor(void *data) - * us to reduce the sample frequency if the CPU and GPU are idle. - */ - old_cpu_power = thm_readl(THM_CEC); -- schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD)); -+ schedule_msec_hrtimeout_interruptible((IPS_SAMPLE_PERIOD)); - last_sample_period = IPS_SAMPLE_PERIOD; - - setup_deferrable_timer_on_stack(&timer, monitor_timeout, -diff --git a/net/core/pktgen.c b/net/core/pktgen.c -index 6e1e10ff433a..be5d6f7142e4 100644 ---- a/net/core/pktgen.c -+++ b/net/core/pktgen.c -@@ -1992,7 +1992,7 @@ static void pktgen_mark_device(const struct pktgen_net *pn, const char *ifname) - mutex_unlock(&pktgen_thread_lock); - pr_debug("%s: waiting for %s to disappear....\n", - __func__, ifname); -- schedule_timeout_interruptible(msecs_to_jiffies(msec_per_try)); -+ schedule_msec_hrtimeout_interruptible((msec_per_try)); - mutex_lock(&pktgen_thread_lock); - - if (++i >= max_tries) { -diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c -index 2efc5b41ad0f..3e3248c48c6b 100644 ---- a/sound/soc/codecs/wm8350.c -+++ b/sound/soc/codecs/wm8350.c -@@ -236,10 +236,10 @@ static void wm8350_pga_work(struct work_struct *work) - out2->ramp == WM8350_RAMP_UP) { - /* delay is longer over 0dB as increases are larger */ - if (i >= WM8350_OUTn_0dB) -- schedule_timeout_interruptible(msecs_to_jiffies -+ schedule_msec_hrtimeout_interruptible( - (2)); - else -- schedule_timeout_interruptible(msecs_to_jiffies -+ schedule_msec_hrtimeout_interruptible( - (1)); - } else - udelay(50); /* doesn't matter if we delay longer */ -@@ -1123,7 +1123,7 @@ static int wm8350_set_bias_level(struct snd_soc_codec *codec, - (platform->dis_out4 << 6)); - - /* wait for discharge */ -- schedule_timeout_interruptible(msecs_to_jiffies -+ schedule_msec_hrtimeout_interruptible( - (platform-> - cap_discharge_msecs)); - -@@ -1139,7 +1139,7 @@ static int wm8350_set_bias_level(struct snd_soc_codec *codec, - WM8350_VBUFEN); - - /* wait for vmid */ -- schedule_timeout_interruptible(msecs_to_jiffies -+ schedule_msec_hrtimeout_interruptible( - (platform-> - vmid_charge_msecs)); - -@@ -1190,7 +1190,7 @@ static int wm8350_set_bias_level(struct snd_soc_codec *codec, - wm8350_reg_write(wm8350, WM8350_POWER_MGMT_1, pm1); - - /* wait */ -- schedule_timeout_interruptible(msecs_to_jiffies -+ schedule_msec_hrtimeout_interruptible( - (platform-> - vmid_discharge_msecs)); - -@@ -1208,7 +1208,7 @@ static int wm8350_set_bias_level(struct snd_soc_codec *codec, - pm1 | WM8350_OUTPUT_DRAIN_EN); - - /* wait */ -- schedule_timeout_interruptible(msecs_to_jiffies -+ schedule_msec_hrtimeout_interruptible( - (platform->drain_msecs)); - - pm1 &= ~WM8350_BIASEN; -diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c -index c77b49a29311..fc50456e90a9 100644 ---- a/sound/soc/codecs/wm8900.c -+++ b/sound/soc/codecs/wm8900.c -@@ -1112,7 +1112,7 @@ static int wm8900_set_bias_level(struct snd_soc_codec *codec, - /* Need to let things settle before stopping the clock - * to ensure that restart works, see "Stopping the - * master clock" in the datasheet. */ -- schedule_timeout_interruptible(msecs_to_jiffies(1)); -+ schedule_msec_hrtimeout_interruptible((1)); - snd_soc_write(codec, WM8900_REG_POWER2, - WM8900_REG_POWER2_SYSCLK_ENA); - break; -diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c -index 7e4822185feb..0c85a207446a 100644 ---- a/sound/soc/codecs/wm9713.c -+++ b/sound/soc/codecs/wm9713.c -@@ -199,7 +199,7 @@ static int wm9713_voice_shutdown(struct snd_soc_dapm_widget *w, - - /* Gracefully shut down the voice interface. */ - snd_soc_update_bits(codec, AC97_HANDSET_RATE, 0x0f00, 0x0200); -- schedule_timeout_interruptible(msecs_to_jiffies(1)); -+ schedule_msec_hrtimeout_interruptible((1)); - snd_soc_update_bits(codec, AC97_HANDSET_RATE, 0x0f00, 0x0f00); - snd_soc_update_bits(codec, AC97_EXTENDED_MID, 0x1000, 0x1000); - -@@ -868,7 +868,7 @@ static int wm9713_set_pll(struct snd_soc_codec *codec, - wm9713->pll_in = freq_in; - - /* wait 10ms AC97 link frames for the link to stabilise */ -- schedule_timeout_interruptible(msecs_to_jiffies(10)); -+ schedule_msec_hrtimeout_interruptible((10)); - return 0; - } - --- -2.11.0 - diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0009-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0009-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch deleted file mode 100644 index c910f3df..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0009-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch +++ /dev/null @@ -1,160 +0,0 @@ -From 6044370cf4bbc5e05f5d78f5772c1d88e3153603 Mon Sep 17 00:00:00 2001 -From: Con Kolivas -Date: Mon, 20 Feb 2017 13:30:32 +1100 -Subject: [PATCH 09/16] Replace all calls to schedule_timeout_uninterruptible - of potentially under 50ms to use schedule_msec_hrtimeout_uninterruptible - ---- - drivers/media/pci/cx18/cx18-gpio.c | 4 ++-- - drivers/net/wireless/intel/ipw2x00/ipw2100.c | 4 ++-- - drivers/rtc/rtc-wm8350.c | 6 +++--- - drivers/scsi/lpfc/lpfc_scsi.c | 2 +- - sound/pci/maestro3.c | 4 ++-- - sound/soc/codecs/rt5631.c | 4 ++-- - sound/soc/soc-dapm.c | 2 +- - 7 files changed, 13 insertions(+), 13 deletions(-) - -diff --git a/drivers/media/pci/cx18/cx18-gpio.c b/drivers/media/pci/cx18/cx18-gpio.c -index 012859e6dc7b..206bd08265a5 100644 ---- a/drivers/media/pci/cx18/cx18-gpio.c -+++ b/drivers/media/pci/cx18/cx18-gpio.c -@@ -90,11 +90,11 @@ static void gpio_reset_seq(struct cx18 *cx, u32 active_lo, u32 active_hi, - - /* Assert */ - gpio_update(cx, mask, ~active_lo); -- schedule_timeout_uninterruptible(msecs_to_jiffies(assert_msecs)); -+ schedule_msec_hrtimeout_uninterruptible((assert_msecs)); - - /* Deassert */ - gpio_update(cx, mask, ~active_hi); -- schedule_timeout_uninterruptible(msecs_to_jiffies(recovery_msecs)); -+ schedule_msec_hrtimeout_uninterruptible((recovery_msecs)); - } - - /* -diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2100.c b/drivers/net/wireless/intel/ipw2x00/ipw2100.c -index 19c442cb93e4..448f41782060 100644 ---- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c -+++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c -@@ -830,7 +830,7 @@ static int ipw2100_hw_send_command(struct ipw2100_priv *priv, - * doesn't seem to have as many firmware restart cycles... - * - * As a test, we're sticking in a 1/100s delay here */ -- schedule_timeout_uninterruptible(msecs_to_jiffies(10)); -+ schedule_msec_hrtimeout_uninterruptible((10)); - - return 0; - -@@ -1281,7 +1281,7 @@ static int ipw2100_start_adapter(struct ipw2100_priv *priv) - IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n"); - i = 5000; - do { -- schedule_timeout_uninterruptible(msecs_to_jiffies(40)); -+ schedule_msec_hrtimeout_uninterruptible((40)); - /* Todo... wait for sync command ... */ - - read_register(priv->net_dev, IPW_REG_INTA, &inta); -diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c -index 483c7993516b..fddbaa475066 100644 ---- a/drivers/rtc/rtc-wm8350.c -+++ b/drivers/rtc/rtc-wm8350.c -@@ -119,7 +119,7 @@ static int wm8350_rtc_settime(struct device *dev, struct rtc_time *tm) - /* Wait until confirmation of stopping */ - do { - rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); -- schedule_timeout_uninterruptible(msecs_to_jiffies(1)); -+ schedule_msec_hrtimeout_uninterruptible((1)); - } while (--retries && !(rtc_ctrl & WM8350_RTC_STS)); - - if (!retries) { -@@ -202,7 +202,7 @@ static int wm8350_rtc_stop_alarm(struct wm8350 *wm8350) - /* Wait until confirmation of stopping */ - do { - rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); -- schedule_timeout_uninterruptible(msecs_to_jiffies(1)); -+ schedule_msec_hrtimeout_uninterruptible((1)); - } while (retries-- && !(rtc_ctrl & WM8350_RTC_ALMSTS)); - - if (!(rtc_ctrl & WM8350_RTC_ALMSTS)) -@@ -225,7 +225,7 @@ static int wm8350_rtc_start_alarm(struct wm8350 *wm8350) - /* Wait until confirmation */ - do { - rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); -- schedule_timeout_uninterruptible(msecs_to_jiffies(1)); -+ schedule_msec_hrtimeout_uninterruptible((1)); - } while (retries-- && rtc_ctrl & WM8350_RTC_ALMSTS); - - if (rtc_ctrl & WM8350_RTC_ALMSTS) -diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c -index 1a6f122bb25d..c0db66302a3e 100644 ---- a/drivers/scsi/lpfc/lpfc_scsi.c -+++ b/drivers/scsi/lpfc/lpfc_scsi.c -@@ -5131,7 +5131,7 @@ lpfc_reset_flush_io_context(struct lpfc_vport *vport, uint16_t tgt_id, - tgt_id, lun_id, context); - later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies; - while (time_after(later, jiffies) && cnt) { -- schedule_timeout_uninterruptible(msecs_to_jiffies(20)); -+ schedule_msec_hrtimeout_uninterruptible((20)); - cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context); - } - if (cnt) { -diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c -index 8f20dec97843..944ce63431b0 100644 ---- a/sound/pci/maestro3.c -+++ b/sound/pci/maestro3.c -@@ -2016,7 +2016,7 @@ static void snd_m3_ac97_reset(struct snd_m3 *chip) - outw(0, io + GPIO_DATA); - outw(dir | GPO_PRIMARY_AC97, io + GPIO_DIRECTION); - -- schedule_timeout_uninterruptible(msecs_to_jiffies(delay1)); -+ schedule_msec_hrtimeout_uninterruptible((delay1)); - - outw(GPO_PRIMARY_AC97, io + GPIO_DATA); - udelay(5); -@@ -2024,7 +2024,7 @@ static void snd_m3_ac97_reset(struct snd_m3 *chip) - outw(IO_SRAM_ENABLE | SERIAL_AC_LINK_ENABLE, io + RING_BUS_CTRL_A); - outw(~0, io + GPIO_MASK); - -- schedule_timeout_uninterruptible(msecs_to_jiffies(delay2)); -+ schedule_msec_hrtimeout_uninterruptible((delay2)); - - if (! snd_m3_try_read_vendor(chip)) - break; -diff --git a/sound/soc/codecs/rt5631.c b/sound/soc/codecs/rt5631.c -index 55b04c55fb4b..2ed02ad6ac41 100644 ---- a/sound/soc/codecs/rt5631.c -+++ b/sound/soc/codecs/rt5631.c -@@ -419,7 +419,7 @@ static void onebit_depop_mute_stage(struct snd_soc_codec *codec, int enable) - hp_zc = snd_soc_read(codec, RT5631_INT_ST_IRQ_CTRL_2); - snd_soc_write(codec, RT5631_INT_ST_IRQ_CTRL_2, hp_zc & 0xf7ff); - if (enable) { -- schedule_timeout_uninterruptible(msecs_to_jiffies(10)); -+ schedule_msec_hrtimeout_uninterruptible((10)); - /* config one-bit depop parameter */ - rt5631_write_index(codec, RT5631_SPK_INTL_CTRL, 0x307f); - snd_soc_update_bits(codec, RT5631_HP_OUT_VOL, -@@ -529,7 +529,7 @@ static void depop_seq_mute_stage(struct snd_soc_codec *codec, int enable) - hp_zc = snd_soc_read(codec, RT5631_INT_ST_IRQ_CTRL_2); - snd_soc_write(codec, RT5631_INT_ST_IRQ_CTRL_2, hp_zc & 0xf7ff); - if (enable) { -- schedule_timeout_uninterruptible(msecs_to_jiffies(10)); -+ schedule_msec_hrtimeout_uninterruptible((10)); - - /* config depop sequence parameter */ - rt5631_write_index(codec, RT5631_SPK_INTL_CTRL, 0x302f); -diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c -index dcef67a9bd48..11c2bb48c8f2 100644 ---- a/sound/soc/soc-dapm.c -+++ b/sound/soc/soc-dapm.c -@@ -134,7 +134,7 @@ static void dapm_assert_locked(struct snd_soc_dapm_context *dapm) - static void pop_wait(u32 pop_time) - { - if (pop_time) -- schedule_timeout_uninterruptible(msecs_to_jiffies(pop_time)); -+ schedule_msec_hrtimeout_uninterruptible((pop_time)); - } - - static void pop_dbg(struct device *dev, u32 pop_time, const char *fmt, ...) --- -2.11.0 - diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0010-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0010-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch deleted file mode 100644 index 260bb98d..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0010-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 071486de633698dcdd163295173ce4663ec9158c Mon Sep 17 00:00:00 2001 -From: Con Kolivas -Date: Mon, 20 Feb 2017 13:32:58 +1100 -Subject: [PATCH 10/16] Don't use hrtimer overlay when pm_freezing since some - drivers still don't correctly use freezable timeouts. - ---- - kernel/time/hrtimer.c | 2 +- - kernel/time/timer.c | 9 +++++---- - 2 files changed, 6 insertions(+), 5 deletions(-) - -diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c -index 13227cf2814c..66456c72bace 100644 ---- a/kernel/time/hrtimer.c -+++ b/kernel/time/hrtimer.c -@@ -1809,7 +1809,7 @@ long __sched schedule_msec_hrtimeout(long timeout) - * (yet) better than Hz, as would occur during startup, use regular - * timers. - */ -- if (jiffs > 4 || hrtimer_resolution >= NSEC_PER_SEC / HZ) -+ if (jiffs > 4 || hrtimer_resolution >= NSEC_PER_SEC / HZ || pm_freezing) - return schedule_timeout(jiffs); - - secs = timeout / 1000; -diff --git a/kernel/time/timer.c b/kernel/time/timer.c -index c68cb9307f64..2f2c96b03efe 100644 ---- a/kernel/time/timer.c -+++ b/kernel/time/timer.c -@@ -44,6 +44,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -1891,12 +1892,12 @@ void msleep(unsigned int msecs) - * Use high resolution timers where the resolution of tick based - * timers is inadequate. - */ -- if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ) { -+ if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ && !pm_freezing) { - while (msecs) - msecs = schedule_msec_hrtimeout_uninterruptible(msecs); - return; - } -- timeout = msecs_to_jiffies(msecs) + 1; -+ timeout = jiffs + 1; - - while (timeout) - timeout = schedule_timeout_uninterruptible(timeout); -@@ -1913,12 +1914,12 @@ unsigned long msleep_interruptible(unsigned int msecs) - int jiffs = msecs_to_jiffies(msecs); - unsigned long timeout; - -- if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ) { -+ if (jiffs < 5 && hrtimer_resolution < NSEC_PER_SEC / HZ && !pm_freezing) { - while (msecs && !signal_pending(current)) - msecs = schedule_msec_hrtimeout_interruptible(msecs); - return msecs; - } -- timeout = msecs_to_jiffies(msecs) + 1; -+ timeout = jiffs + 1; - - while (timeout && !signal_pending(current)) - timeout = schedule_timeout_interruptible(timeout); --- -2.11.0 - diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0011-Make-hrtimer-granularity-and-minimum-hrtimeout-confi.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0011-Make-hrtimer-granularity-and-minimum-hrtimeout-confi.patch deleted file mode 100644 index 5ac20300..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0011-Make-hrtimer-granularity-and-minimum-hrtimeout-confi.patch +++ /dev/null @@ -1,136 +0,0 @@ -diff -Nur a/kernel/sysctl.c b/kernel/sysctl.c ---- a/kernel/sysctl.c 2018-11-03 17:03:07.433069521 +0000 -+++ b/kernel/sysctl.c 2018-11-03 17:02:11.020267246 +0000 -@@ -141,7 +141,9 @@ - extern int sched_iso_cpu; - extern int sched_yield_type; - #endif --#ifdef CONFIG_PRINTK -+extern int hrtimer_granularity_us; -+extern int hrtimeout_min_us; -+#if defined(CONFIG_PRINTK) || defined(CONFIG_SCHED_MUQSS) - static int ten_thousand __read_only = 10000; - #endif - #ifdef CONFIG_PERF_EVENTS -@@ -1119,6 +1121,24 @@ - .extra2 = &two, - }, - #endif -+ { -+ .procname = "hrtimer_granularity_us", -+ .data = &hrtimer_granularity_us, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = &proc_dointvec_minmax, -+ .extra1 = &one, -+ .extra2 = &ten_thousand, -+ }, -+ { -+ .procname = "hrtimeout_min_us", -+ .data = &hrtimeout_min_us, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = &proc_dointvec_minmax, -+ .extra1 = &one, -+ .extra2 = &ten_thousand, -+ }, - #if defined(CONFIG_S390) && defined(CONFIG_SMP) - { - .procname = "spin_retry", -diff -Nur a/kernel/time/clockevents.c b/kernel/time/clockevents.c ---- a/kernel/time/clockevents.c 2018-11-03 17:03:07.433069521 +0000 -+++ b/kernel/time/clockevents.c 2018-11-03 16:58:17.283800909 +0000 -@@ -198,13 +198,9 @@ - - #ifdef CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST - --#ifdef CONFIG_SCHED_MUQSS -+int __read_mostly hrtimer_granularity_us = 100; - /* Limit min_delta to 100us */ --#define MIN_DELTA_LIMIT (NSEC_PER_SEC / 10000) --#else --/* Limit min_delta to a jiffie */ --#define MIN_DELTA_LIMIT (NSEC_PER_SEC / HZ) --#endif -+#define MIN_DELTA_LIMIT (hrtimer_granularity_us * NSEC_PER_USEC) - - /** - * clockevents_increase_min_delta - raise minimum delta of a clock event device -diff -Nur a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c ---- a/kernel/time/hrtimer.c 2018-11-03 17:04:16.448274547 +0000 -+++ b/kernel/time/hrtimer.c 2018-11-03 16:58:17.283800909 +0000 -@@ -1803,7 +1803,7 @@ - long __sched schedule_msec_hrtimeout(long timeout) - { - struct hrtimer_sleeper t; -- int delta, secs, jiffs; -+ int delta, jiffs; - ktime_t expires; - - if (!timeout) { -@@ -1820,9 +1820,8 @@ - if (jiffs > 4 || hrtimer_resolution >= NSEC_PER_SEC / HZ || pm_freezing) - return schedule_timeout(jiffs); - -- secs = timeout / 1000; - delta = (timeout % 1000) * NSEC_PER_MSEC; -- expires = ktime_set(secs, delta); -+ expires = ktime_set(0, delta); - - hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - hrtimer_set_expires_range_ns(&t.timer, expires, delta); -@@ -1846,9 +1845,53 @@ - - EXPORT_SYMBOL(schedule_msec_hrtimeout); - -+#define USECS_PER_SEC 1000000 -+extern int hrtimer_granularity_us; -+ -+static inline long schedule_usec_hrtimeout(long timeout) -+{ -+ struct hrtimer_sleeper t; -+ ktime_t expires; -+ int delta; -+ -+ if (!timeout) { -+ __set_current_state(TASK_RUNNING); -+ return 0; -+ } -+ -+ if (hrtimer_resolution >= NSEC_PER_SEC / HZ) -+ return schedule_timeout(usecs_to_jiffies(timeout)); -+ -+ if (timeout < hrtimer_granularity_us) -+ timeout = hrtimer_granularity_us; -+ delta = (timeout % USECS_PER_SEC) * NSEC_PER_USEC; -+ expires = ktime_set(0, delta); -+ -+ hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); -+ hrtimer_set_expires_range_ns(&t.timer, expires, delta); -+ -+ hrtimer_init_sleeper(&t, current); -+ -+ hrtimer_start_expires(&t.timer, HRTIMER_MODE_REL); -+ -+ if (likely(t.task)) -+ schedule(); -+ -+ hrtimer_cancel(&t.timer); -+ destroy_hrtimer_on_stack(&t.timer); -+ -+ __set_current_state(TASK_RUNNING); -+ -+ expires = hrtimer_expires_remaining(&t.timer); -+ timeout = ktime_to_us(expires); -+ return timeout < 0 ? 0 : timeout; -+} -+ -+int __read_mostly hrtimeout_min_us = 1000; -+ - long __sched schedule_min_hrtimeout(void) - { -- return schedule_msec_hrtimeout(1); -+ return usecs_to_jiffies(schedule_usec_hrtimeout(hrtimeout_min_us)); - } - - EXPORT_SYMBOL(schedule_min_hrtimeout); diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0012-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0012-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch deleted file mode 100644 index 99b28d65..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0012-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch +++ /dev/null @@ -1,81 +0,0 @@ -From 9e47a80f690080c12ce607158b96c305707543b8 Mon Sep 17 00:00:00 2001 -From: Con Kolivas -Date: Wed, 7 Dec 2016 21:23:01 +1100 -Subject: [PATCH 12/16] Reinstate default Hz of 100 in combination with MuQSS - and -ck patches. - ---- - kernel/Kconfig.hz | 25 ++++++++++++++++++------- - 1 file changed, 18 insertions(+), 7 deletions(-) - -diff --git a/kernel/Kconfig.hz b/kernel/Kconfig.hz -index 2a202a846757..1806fcac8f14 100644 ---- a/kernel/Kconfig.hz -+++ b/kernel/Kconfig.hz -@@ -4,7 +4,8 @@ - - choice - prompt "Timer frequency" -- default HZ_250 -+ default HZ_100 if SCHED_MUQSS -+ default HZ_250_NODEF if !SCHED_MUQSS - help - Allows the configuration of the timer frequency. It is customary - to have the timer interrupt run at 1000 Hz but 100 Hz may be more -@@ -19,11 +20,18 @@ choice - config HZ_100 - bool "100 HZ" - help -+ 100 Hz is a suitable choice in combination with MuQSS which does -+ not rely on ticks for rescheduling interrupts, and is not Hz limited -+ for timeouts and sleeps from both the kernel and userspace. -+ This allows us to benefit from the lower overhead and higher -+ throughput of fewer timer ticks. -+ -+ Non-MuQSS kernels: - 100 Hz is a typical choice for servers, SMP and NUMA systems - with lots of processors that may show reduced performance if - too many timer interrupts are occurring. - -- config HZ_250 -+ config HZ_250_NODEF - bool "250 HZ" - help - 250 Hz is a good compromise choice allowing server performance -@@ -31,7 +39,10 @@ choice - on SMP and NUMA systems. If you are going to be using NTSC video - or multimedia, selected 300Hz instead. - -- config HZ_300 -+ 250 Hz is the default choice for the mainline scheduler but not -+ advantageous in combination with MuQSS. -+ -+ config HZ_300_NODEF - bool "300 HZ" - help - 300 Hz is a good compromise choice allowing server performance -@@ -39,7 +50,7 @@ choice - on SMP and NUMA systems and exactly dividing by both PAL and - NTSC frame rates for video and multimedia work. - -- config HZ_1000 -+ config HZ_1000_NODEF - bool "1000 HZ" - help - 1000 Hz is the preferred choice for desktop systems and other -@@ -50,9 +61,9 @@ endchoice - config HZ - int - default 100 if HZ_100 -- default 250 if HZ_250 -- default 300 if HZ_300 -- default 1000 if HZ_1000 -+ default 250 if HZ_250_NODEF -+ default 300 if HZ_300_NODEF -+ default 1000 if HZ_1000_NODEF - - config SCHED_HRTICK - def_bool HIGH_RES_TIMERS --- -2.11.0 - diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0013-Make-threaded-IRQs-optionally-the-default-which-can-.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0013-Make-threaded-IRQs-optionally-the-default-which-can-.patch deleted file mode 100644 index 63ec9fdf..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0013-Make-threaded-IRQs-optionally-the-default-which-can-.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 5902b315d4061ebbe73a62c52e6d3b618066cebc Mon Sep 17 00:00:00 2001 -From: Con Kolivas -Date: Wed, 7 Dec 2016 21:13:16 +1100 -Subject: [PATCH 13/16] Make threaded IRQs optionally the default which can be - disabled. - ---- - kernel/irq/Kconfig | 14 ++++++++++++++ - kernel/irq/manage.c | 10 ++++++++++ - 2 files changed, 24 insertions(+) - -diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig -index a117adf7084b..0984c54fd4e9 100644 ---- a/kernel/irq/Kconfig -+++ b/kernel/irq/Kconfig -@@ -111,6 +111,20 @@ config IRQ_DOMAIN_DEBUG - config IRQ_FORCED_THREADING - bool - -+config FORCE_IRQ_THREADING -+ bool "Make IRQ threading compulsory" -+ depends on IRQ_FORCED_THREADING -+ default y -+ ---help--- -+ -+ Make IRQ threading mandatory for any IRQ handlers that support it -+ instead of being optional and requiring the threadirqs kernel -+ parameter. Instead they can be optionally disabled with the -+ nothreadirqs kernel parameter. -+ -+ Enable if you are building for a desktop or low latency system, -+ otherwise say N. -+ - config SPARSE_IRQ - bool "Support sparse irq numbering" if MAY_HAVE_SPARSE_IRQ - ---help--- -diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c -index 4bff6a10ae8e..5a6df0dd23c4 100644 ---- a/kernel/irq/manage.c -+++ b/kernel/irq/manage.c -@@ -24,7 +24,17 @@ - #include "internals.h" - - #ifdef CONFIG_IRQ_FORCED_THREADING -+#ifdef CONFIG_FORCE_IRQ_THREADING -+__read_mostly bool force_irqthreads = true; -+#else - __read_mostly bool force_irqthreads; -+#endif -+static int __init setup_noforced_irqthreads(char *arg) -+{ -+ force_irqthreads = false; -+ return 0; -+} -+early_param("nothreadirqs", setup_noforced_irqthreads); - - static int __init setup_forced_irqthreads(char *arg) - { --- -2.11.0 - diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0014-Swap-sucks.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0014-Swap-sucks.patch deleted file mode 100644 index 6bf5bcda..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0014-Swap-sucks.patch +++ /dev/null @@ -1,25 +0,0 @@ -From ed0ab4c80fcb6fa4abb4f2f897e591df6eaa2d0e Mon Sep 17 00:00:00 2001 -From: Con Kolivas -Date: Sat, 12 Aug 2017 12:02:04 +1000 -Subject: [PATCH 14/16] Swap sucks. - ---- - mm/vmscan.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/mm/vmscan.c b/mm/vmscan.c -index eb2f0315b8c0..67d03efab288 100644 ---- a/mm/vmscan.c -+++ b/mm/vmscan.c -@@ -149,7 +149,7 @@ struct scan_control { - /* - * From 0 .. 100. Higher means more swappy. - */ --int vm_swappiness = 60; -+int vm_swappiness = 33; - /* - * The total number of pages which are beyond the high watermark within all - * zones. --- -2.11.0 - diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0015-MuQSS.c-needs-irq_regs.h-to-use-get_irq_regs.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0015-MuQSS.c-needs-irq_regs.h-to-use-get_irq_regs.patch deleted file mode 100644 index bfa509a5..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0015-MuQSS.c-needs-irq_regs.h-to-use-get_irq_regs.patch +++ /dev/null @@ -1,19 +0,0 @@ -diff --git a/kernel/sched/MuQSS.c b/kernel/sched/MuQSS.c -index e84d700709ff6..16364915cff53 100644 ---- a/kernel/sched/MuQSS.c -+++ b/kernel/sched/MuQSS.c -@@ -70,6 +70,14 @@ - - #include "MuQSS.h" - -+/* needing to include irq_regs.h, "because reasons"... -+ * implicit declaration of function ‘get_irq_regs’; -+ * did you mean ‘get_ibs_caps’? -+ * [-Werror=implicit-function-declaration] -+ * ^ this is because autodetect is not flawless -+ */ -+#include -+ - #define rt_prio(prio) unlikely((prio) < MAX_RT_PRIO) - #define rt_task(p) rt_prio((p)->prio) - #define batch_task(p) (unlikely((p)->policy == SCHED_BATCH)) diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0016-unfuck-MuQSS-on-linux-4_14_15+.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0016-unfuck-MuQSS-on-linux-4_14_15+.patch deleted file mode 100644 index f7dc1d1c..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0016-unfuck-MuQSS-on-linux-4_14_15+.patch +++ /dev/null @@ -1,48 +0,0 @@ -diff --git a/kernel/sched/MuQSS.c b/kernel/sched/MuQSS.c -index e84d700709ff6..b0be7fcfe41f9 100644 ---- a/kernel/sched/MuQSS.c -+++ b/kernel/sched/MuQSS.c -@@ -55,6 +55,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -1959,7 +1960,11 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) - p->state = TASK_WAKING; - - if (p->in_iowait) { -+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 14, 15) - delayacct_blkio_end(); -+#else -+ delayacct_blkio_end(p); -+#endif - atomic_dec(&task_rq(p)->nr_iowait); - } - -@@ -1970,7 +1975,11 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) - #else /* CONFIG_SMP */ - - if (p->in_iowait) { -+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 14, 15) - delayacct_blkio_end(); -+#else -+ delayacct_blkio_end(p); -+#endif - atomic_dec(&task_rq(p)->nr_iowait); - } - -@@ -2022,7 +2031,11 @@ static void try_to_wake_up_local(struct task_struct *p) - - if (!task_on_rq_queued(p)) { - if (p->in_iowait) { -+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 14, 15) - delayacct_blkio_end(); -+#else -+ delayacct_blkio_end(p); -+#endif - atomic_dec(&rq->nr_iowait); - } - ttwu_activate(rq, p); diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-0017-unfuck-MuQSS-on-linux-4_14_75+.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-0017-unfuck-MuQSS-on-linux-4_14_75+.patch deleted file mode 100644 index 1a1717bf..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-0017-unfuck-MuQSS-on-linux-4_14_75+.patch +++ /dev/null @@ -1,14 +0,0 @@ -diff -Nur a/kernel/sched/MuQSS.c b/kernel/sched/MuQSS.c ---- a/kernel/sched/MuQSS.c 2019-01-05 22:51:24.547448624 +0000 -+++ b/kernel/sched/MuQSS.c 2019-01-05 22:58:29.821451056 +0000 -@@ -1021,6 +1021,10 @@ - #define CPUIDLE_THREAD_BUSY (16) - #define CPUIDLE_DIFF_NODE (32) - -+#ifdef CONFIG_SCHED_SMT -+DEFINE_STATIC_KEY_FALSE(sched_smt_present); -+#endif -+ - /* - * The best idle CPU is chosen according to the CPUIDLE ranking above where the - * lowest value would give the most suitable CPU to schedule p onto next. The diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-Revert-ath10k-activate-user-space-firmware-loading.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-Revert-ath10k-activate-user-space-firmware-loading.patch deleted file mode 100644 index 28f9b2f6..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-Revert-ath10k-activate-user-space-firmware-loading.patch +++ /dev/null @@ -1,13 +0,0 @@ -diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c -index a4f635820..9b4c4facf 100644 ---- a/drivers/net/wireless/ath/ath10k/core.c -+++ b/drivers/net/wireless/ath/ath10k/core.c -@@ -519,7 +519,7 @@ static const struct firmware *ath10k_fetch_fw_file(struct ath10k *ar, - dir = "."; - - snprintf(filename, sizeof(filename), "%s/%s", dir, file); -- ret = request_firmware(&fw, filename, ar->dev); -+ ret = request_firmware_direct(&fw, filename, ar->dev); - ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot fw request '%s': %d\n", - filename, ret); - diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-amd64.config b/sys-kernel/linux-image-redcore-lts/files/4.14-amd64.config deleted file mode 100644 index 307b0bd9..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-amd64.config +++ /dev/null @@ -1,9101 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Linux/x86 4.14.95-redcore-lts-r1 Kernel Configuration -# -CONFIG_64BIT=y -CONFIG_X86_64=y -CONFIG_X86=y -CONFIG_INSTRUCTION_DECODER=y -CONFIG_OUTPUT_FORMAT="elf64-x86-64" -CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_MMU=y -CONFIG_ARCH_MMAP_RND_BITS_MIN=28 -CONFIG_ARCH_MMAP_RND_BITS_MAX=32 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_HAS_CPU_RELAX=y -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y -CONFIG_HAVE_SETUP_PER_CPU_AREA=y -CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y -CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ZONE_DMA32=y -CONFIG_AUDIT_ARCH=y -CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y -CONFIG_HAVE_INTEL_TXT=y -CONFIG_X86_64_SMP=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_PGTABLE_LEVELS=4 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -CONFIG_IRQ_WORK=y -CONFIG_BUILDTIME_EXTABLE_SORT=y -CONFIG_THREAD_INFO_IN_TASK=y - -# -# General setup -# -CONFIG_SCHED_MUQSS=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_CROSS_COMPILE="" -# CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_BZIP2=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_LZ4=y -# CONFIG_KERNEL_GZIP is not set -# CONFIG_KERNEL_BZIP2 is not set -# CONFIG_KERNEL_LZMA is not set -# CONFIG_KERNEL_XZ is not set -# CONFIG_KERNEL_LZO is not set -CONFIG_KERNEL_LZ4=y -CONFIG_DEFAULT_HOSTNAME="(none)" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -CONFIG_CROSS_MEMORY_ATTACH=y -CONFIG_FHANDLE=y -# CONFIG_USELIB is not set -CONFIG_AUDIT=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_AUDITSYSCALL=y -CONFIG_AUDIT_WATCH=y -CONFIG_AUDIT_TREE=y - -# -# IRQ subsystem -# -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_SIM=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -# CONFIG_IRQ_DOMAIN_DEBUG is not set -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_FORCE_IRQ_THREADING=y -CONFIG_SPARSE_IRQ=y -# CONFIG_GENERIC_IRQ_DEBUGFS is not set -CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y -CONFIG_GENERIC_CMOS_UPDATE=y - -# -# Timers subsystem -# -CONFIG_TICK_ONESHOT=y -CONFIG_HZ_PERIODIC=y -# CONFIG_NO_HZ_IDLE is not set -# CONFIG_NO_HZ_FULL is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y - -# -# CPU/Task time and stats accounting -# -CONFIG_VIRT_CPU_ACCOUNTING=y -# CONFIG_TICK_CPU_ACCOUNTING is not set -CONFIG_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_IRQ_TIME_ACCOUNTING=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y - -# -# RCU Subsystem -# -CONFIG_PREEMPT_RCU=y -# CONFIG_RCU_EXPERT is not set -CONFIG_SRCU=y -CONFIG_TREE_SRCU=y -CONFIG_TASKS_RCU=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RCU_NEED_SEGCBLIST=y -CONFIG_CONTEXT_TRACKING=y -# CONFIG_CONTEXT_TRACKING_FORCE is not set -CONFIG_BUILD_BIN2C=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_LOG_CPU_MAX_BUF_SHIFT=13 -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 -CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y -CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y -CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y -CONFIG_ARCH_SUPPORTS_INT128=y -CONFIG_CGROUPS=y -CONFIG_PAGE_COUNTER=y -CONFIG_MEMCG=y -CONFIG_MEMCG_SWAP=y -CONFIG_MEMCG_SWAP_ENABLED=y -CONFIG_BLK_CGROUP=y -# CONFIG_DEBUG_BLK_CGROUP is not set -CONFIG_CGROUP_WRITEBACK=y -CONFIG_CGROUP_SCHED=y -CONFIG_CGROUP_PIDS=y -# CONFIG_CGROUP_RDMA is not set -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_HUGETLB=y -CONFIG_CPUSETS=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_PERF=y -CONFIG_CGROUP_BPF=y -# CONFIG_CGROUP_DEBUG is not set -CONFIG_SOCK_CGROUP_DATA=y -# CONFIG_CHECKPOINT_RESTORE is not set -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_USER_NS=y -CONFIG_PID_NS=y -CONFIG_NET_NS=y -# CONFIG_SYSFS_DEPRECATED is not set -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_RD_XZ=y -CONFIG_RD_LZO=y -CONFIG_RD_LZ4=y -CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_LOCAL_INIT is not set -CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y -CONFIG_HAVE_UID16=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_HAVE_PCSPKR_PLATFORM=y -CONFIG_BPF=y -# CONFIG_EXPERT is not set -CONFIG_UID16=y -CONFIG_MULTIUSER=y -CONFIG_SGETMASK_SYSCALL=y -CONFIG_SYSFS_SYSCALL=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_POSIX_TIMERS=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y -CONFIG_KALLSYMS_BASE_RELATIVE=y -CONFIG_PRINTK=y -CONFIG_PRINTK_NMI=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_FUTEX_PI=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_BPF_SYSCALL=y -CONFIG_BPF_JIT_ALWAYS_ON=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_ADVISE_SYSCALLS=y -CONFIG_USERFAULTFD=y -CONFIG_PCI_QUIRKS=y -CONFIG_MEMBARRIER=y -# CONFIG_EMBEDDED is not set -CONFIG_HAVE_PERF_EVENTS=y -# CONFIG_PC104 is not set - -# -# Kernel Performance Events And Counters -# -CONFIG_PERF_EVENTS=y -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLUB_MEMCG_SYSFS_ON is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y -CONFIG_SLAB_MERGE_DEFAULT=y -CONFIG_SLAB_FREELIST_RANDOM=y -CONFIG_SLAB_FREELIST_HARDENED=y -CONFIG_SLAB_HARDENED=y -CONFIG_SLAB_SANITIZE=y -CONFIG_SLAB_SANITIZE_VERIFY=y -CONFIG_SLUB_CPU_PARTIAL=y -CONFIG_SYSTEM_DATA_VERIFICATION=y -CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -CONFIG_CRASH_CORE=y -CONFIG_KEXEC_CORE=y -CONFIG_HOTPLUG_SMT=y -# CONFIG_OPROFILE is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_OPROFILE_NMI_TIMER=y -CONFIG_KPROBES=y -CONFIG_JUMP_LABEL=y -# CONFIG_STATIC_KEYS_SELFTEST is not set -CONFIG_OPTPROBES=y -CONFIG_UPROBES=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_KRETPROBES=y -CONFIG_USER_RETURN_NOTIFIER=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_KPROBES_ON_FTRACE=y -CONFIG_HAVE_NMI=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y -CONFIG_HAVE_USER_RETURN_NOTIFIER=y -CONFIG_HAVE_PERF_EVENTS_NMI=y -CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_RCU_TABLE_FREE=y -CONFIG_HAVE_RCU_TABLE_INVALIDATE=y -CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y -CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y -CONFIG_HAVE_CMPXCHG_LOCAL=y -CONFIG_HAVE_CMPXCHG_DOUBLE=y -CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_SECCOMP_FILTER=y -CONFIG_HAVE_GCC_PLUGINS=y -# CONFIG_GCC_PLUGINS is not set -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_CC_STACKPROTECTOR=y -# CONFIG_CC_STACKPROTECTOR_NONE is not set -# CONFIG_CC_STACKPROTECTOR_REGULAR is not set -CONFIG_CC_STACKPROTECTOR_STRONG=y -CONFIG_THIN_ARCHIVES=y -CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y -CONFIG_HAVE_ARCH_HUGE_VMAP=y -CONFIG_HAVE_ARCH_SOFT_DIRTY=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_HAVE_ARCH_MMAP_RND_BITS=y -CONFIG_HAVE_EXIT_THREAD=y -CONFIG_ARCH_MMAP_RND_BITS=32 -CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y -CONFIG_ARCH_MMAP_RND_COMPAT_BITS=16 -CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_HAVE_STACK_VALIDATION=y -# CONFIG_HAVE_ARCH_HASH is not set -# CONFIG_ISA_BUS_API is not set -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_COMPAT_OLD_SIGACTION=y -# CONFIG_CPU_NO_EFFICIENT_FFS is not set -CONFIG_HAVE_ARCH_VMAP_STACK=y -CONFIG_VMAP_STACK=y -# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set -# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_REFCOUNT=y -CONFIG_REFCOUNT_FULL=y - -# -# GCOV-based kernel profiling -# -# CONFIG_GCOV_KERNEL is not set -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_MODULE_SIG=y -# CONFIG_MODULE_SIG_FORCE is not set -CONFIG_MODULE_SIG_ALL=y -# CONFIG_MODULE_SIG_SHA1 is not set -# CONFIG_MODULE_SIG_SHA224 is not set -# CONFIG_MODULE_SIG_SHA256 is not set -# CONFIG_MODULE_SIG_SHA384 is not set -CONFIG_MODULE_SIG_SHA512=y -CONFIG_MODULE_SIG_HASH="sha512" -CONFIG_MODULE_COMPRESS=y -CONFIG_MODULE_COMPRESS_GZIP=y -# CONFIG_MODULE_COMPRESS_XZ is not set -# CONFIG_TRIM_UNUSED_KSYMS is not set -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_BLOCK=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_BLK_DEV_BSG=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_BLK_DEV_ZONED=y -CONFIG_BLK_DEV_THROTTLING=y -# CONFIG_BLK_DEV_THROTTLING_LOW is not set -CONFIG_BLK_CMDLINE_PARSER=y -CONFIG_BLK_WBT=y -CONFIG_BLK_WBT_SQ=y -CONFIG_BLK_WBT_MQ=y -CONFIG_BLK_DEBUG_FS=y -# CONFIG_BLK_SED_OPAL is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_AIX_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -CONFIG_LDM_PARTITION=y -CONFIG_LDM_DEBUG=y -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -CONFIG_EFI_PARTITION=y -# CONFIG_SYSV68_PARTITION is not set -CONFIG_CMDLINE_PARTITION=y -CONFIG_BLOCK_COMPAT=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_MQ_VIRTIO=y -CONFIG_BLK_MQ_RDMA=y - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_CFQ_GROUP_IOSCHED=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_MQ_IOSCHED_DEADLINE=y -# CONFIG_MQ_IOSCHED_KYBER is not set -CONFIG_IOSCHED_BFQ=y -CONFIG_BFQ_GROUP_IOSCHED=y -CONFIG_PREEMPT_NOTIFIERS=y -CONFIG_PADATA=y -CONFIG_ASN1=y -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_ARCH_USE_QUEUED_RWLOCKS=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_FREEZER=y - -# -# Processor type and features -# -CONFIG_ZONE_DMA=y -CONFIG_SMP=y -CONFIG_X86_FEATURE_NAMES=y -CONFIG_X86_FAST_FEATURE_TESTS=y -CONFIG_X86_X2APIC=y -CONFIG_X86_MPPARSE=y -# CONFIG_GOLDFISH is not set -CONFIG_RETPOLINE=y -CONFIG_INTEL_RDT=y -# CONFIG_X86_EXTENDED_PLATFORM is not set -CONFIG_X86_INTEL_LPSS=y -CONFIG_X86_AMD_PLATFORM_DEVICE=y -CONFIG_IOSF_MBI=y -# CONFIG_IOSF_MBI_DEBUG is not set -CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_HYPERVISOR_GUEST=y -CONFIG_PARAVIRT=y -# CONFIG_PARAVIRT_DEBUG is not set -# CONFIG_PARAVIRT_SPINLOCKS is not set -# CONFIG_XEN is not set -CONFIG_KVM_GUEST=y -# CONFIG_KVM_DEBUG_FS is not set -# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set -CONFIG_PARAVIRT_CLOCK=y -CONFIG_NO_BOOTMEM=y -# CONFIG_MK8 is not set -# CONFIG_MPSC is not set -# CONFIG_MCORE2 is not set -# CONFIG_MATOM is not set -CONFIG_GENERIC_CPU=y -CONFIG_X86_INTERNODE_CACHE_SHIFT=6 -CONFIG_X86_L1_CACHE_SHIFT=6 -CONFIG_X86_TSC=y -CONFIG_X86_CMPXCHG64=y -CONFIG_X86_CMOV=y -CONFIG_X86_MINIMUM_CPU_FAMILY=64 -CONFIG_X86_DEBUGCTLMSR=y -CONFIG_CPU_SUP_INTEL=y -CONFIG_CPU_SUP_AMD=y -CONFIG_CPU_SUP_CENTAUR=y -CONFIG_HPET_TIMER=y -CONFIG_HPET_EMULATE_RTC=y -CONFIG_DMI=y -CONFIG_GART_IOMMU=y -CONFIG_CALGARY_IOMMU=y -CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y -CONFIG_SWIOTLB=y -CONFIG_IOMMU_HELPER=y -CONFIG_MAXSMP=y -CONFIG_NR_CPUS=8192 -CONFIG_SCHED_SMT=y -CONFIG_SMT_NICE=y -CONFIG_SCHED_MC=y -CONFIG_SCHED_MC_PRIO=y -# CONFIG_PREEMPT_NONE is not set -# CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREEMPT=y -CONFIG_PREEMPT_COUNT=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y -CONFIG_X86_MCE=y -# CONFIG_X86_MCELOG_LEGACY is not set -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y -CONFIG_X86_MCE_THRESHOLD=y -# CONFIG_X86_MCE_INJECT is not set -CONFIG_X86_THERMAL_VECTOR=y - -# -# Performance monitoring -# -CONFIG_PERF_EVENTS_INTEL_UNCORE=y -CONFIG_PERF_EVENTS_INTEL_RAPL=y -CONFIG_PERF_EVENTS_INTEL_CSTATE=y -CONFIG_PERF_EVENTS_AMD_POWER=m -# CONFIG_VM86 is not set -# CONFIG_X86_16BIT is not set -CONFIG_X86_VSYSCALL_EMULATION=y -CONFIG_I8K=m -CONFIG_MICROCODE=y -CONFIG_MICROCODE_INTEL=y -CONFIG_MICROCODE_AMD=y -CONFIG_MICROCODE_OLD_INTERFACE=y -CONFIG_X86_MSR=m -CONFIG_X86_CPUID=m -# CONFIG_X86_5LEVEL is not set -CONFIG_ARCH_PHYS_ADDR_T_64BIT=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_X86_DIRECT_GBPAGES=y -CONFIG_ARCH_HAS_MEM_ENCRYPT=y -CONFIG_AMD_MEM_ENCRYPT=y -# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set -CONFIG_ARCH_USE_MEMREMAP_PROT=y -CONFIG_NUMA=y -CONFIG_AMD_NUMA=y -CONFIG_X86_64_ACPI_NUMA=y -CONFIG_NODES_SPAN_OTHER_NODES=y -# CONFIG_NUMA_EMU is not set -CONFIG_NODES_SHIFT=10 -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_MEMORY_PROBE=y -CONFIG_ARCH_PROC_KCORE_TEXT=y -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_NEED_MULTIPLE_NODES=y -CONFIG_HAVE_MEMORY_PRESENT=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y -CONFIG_SPARSEMEM_VMEMMAP=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_GENERIC_GUP=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y -CONFIG_MEMORY_ISOLATION=y -CONFIG_HAVE_BOOTMEM_INFO_NODE=y -CONFIG_MEMORY_HOTPLUG=y -CONFIG_MEMORY_HOTPLUG_SPARSE=y -# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set -CONFIG_MEMORY_HOTREMOVE=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y -CONFIG_MEMORY_BALLOON=y -CONFIG_BALLOON_COMPACTION=y -CONFIG_COMPACTION=y -CONFIG_MIGRATION=y -CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y -CONFIG_ARCH_ENABLE_THP_MIGRATION=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_MMU_NOTIFIER=y -CONFIG_KSM=y -CONFIG_UKSM=y -# CONFIG_KSM_LEGACY is not set -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 -CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y -CONFIG_MEMORY_FAILURE=y -# CONFIG_HWPOISON_INJECT is not set -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y -# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set -CONFIG_ARCH_WANTS_THP_SWAP=y -CONFIG_THP_SWAP=y -CONFIG_TRANSPARENT_HUGE_PAGECACHE=y -CONFIG_CLEANCACHE=y -CONFIG_FRONTSWAP=y -CONFIG_CMA=y -# CONFIG_CMA_DEBUG is not set -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_AREAS=7 -# CONFIG_ZSWAP is not set -CONFIG_ZPOOL=m -CONFIG_ZBUD=m -CONFIG_Z3FOLD=m -CONFIG_ZSMALLOC=y -# CONFIG_PGTABLE_MAPPING is not set -# CONFIG_ZSMALLOC_STAT is not set -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y -# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set -# CONFIG_IDLE_PAGE_TRACKING is not set -CONFIG_ARCH_HAS_ZONE_DEVICE=y -# CONFIG_ZONE_DEVICE is not set -CONFIG_FRAME_VECTOR=y -CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y -CONFIG_ARCH_HAS_PKEYS=y -# CONFIG_PERCPU_STATS is not set -CONFIG_X86_PMEM_LEGACY_DEVICE=y -CONFIG_X86_PMEM_LEGACY=m -CONFIG_X86_CHECK_BIOS_CORRUPTION=y -CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y -CONFIG_X86_RESERVE_LOW=64 -CONFIG_MTRR=y -CONFIG_MTRR_SANITIZER=y -CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 -CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 -CONFIG_X86_PAT=y -CONFIG_ARCH_USES_PG_UNCACHED=y -CONFIG_ARCH_RANDOM=y -CONFIG_X86_SMAP=y -CONFIG_X86_INTEL_MPX=y -CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y -CONFIG_EFI=y -CONFIG_EFI_STUB=y -CONFIG_EFI_MIXED=y -CONFIG_SECCOMP=y -CONFIG_HZ_100=y -# CONFIG_HZ_250_NODEF is not set -# CONFIG_HZ_300_NODEF is not set -# CONFIG_HZ_1000_NODEF is not set -CONFIG_HZ=100 -CONFIG_SCHED_HRTICK=y -CONFIG_KEXEC=y -# CONFIG_CRASH_DUMP is not set -# CONFIG_KEXEC_JUMP is not set -CONFIG_PHYSICAL_START=0x1000000 -CONFIG_RELOCATABLE=y -CONFIG_RANDOMIZE_BASE=y -CONFIG_X86_NEED_RELOCS=y -CONFIG_PHYSICAL_ALIGN=0x1000000 -CONFIG_RANDOMIZE_MEMORY=y -CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa -CONFIG_HOTPLUG_CPU=y -CONFIG_BOOTPARAM_HOTPLUG_CPU0=y -# CONFIG_DEBUG_HOTPLUG_CPU0 is not set -# CONFIG_COMPAT_VDSO is not set -CONFIG_LEGACY_VSYSCALL_NATIVE=y -# CONFIG_LEGACY_VSYSCALL_EMULATE is not set -# CONFIG_LEGACY_VSYSCALL_NONE is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_MODIFY_LDT_SYSCALL=y -CONFIG_HAVE_LIVEPATCH=y -CONFIG_ARCH_HAS_ADD_PAGES=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_USE_PERCPU_NUMA_NODE_ID=y - -# -# Power management and ACPI options -# -CONFIG_ARCH_HIBERNATION_HEADER=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -CONFIG_HIBERNATE_CALLBACKS=y -CONFIG_HIBERNATION=y -CONFIG_PM_STD_PARTITION="" -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -CONFIG_PM_AUTOSLEEP=y -CONFIG_PM_WAKELOCKS=y -CONFIG_PM_WAKELOCKS_LIMIT=100 -CONFIG_PM_WAKELOCKS_GC=y -CONFIG_PM=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_OPP=y -CONFIG_PM_CLK=y -CONFIG_PM_GENERIC_DOMAINS=y -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_PM_GENERIC_DOMAINS_SLEEP=y -CONFIG_ACPI=y -CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y -CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y -CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y -# CONFIG_ACPI_DEBUGGER is not set -CONFIG_ACPI_SLEEP=y -# CONFIG_ACPI_PROCFS_POWER is not set -CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y -# CONFIG_ACPI_EC_DEBUGFS is not set -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_VIDEO=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_DOCK=y -CONFIG_ACPI_CPU_FREQ_PSS=y -CONFIG_ACPI_PROCESSOR_CSTATE=y -CONFIG_ACPI_PROCESSOR_IDLE=y -CONFIG_ACPI_CPPC_LIB=y -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_IPMI=m -CONFIG_ACPI_HOTPLUG_CPU=y -CONFIG_ACPI_PROCESSOR_AGGREGATOR=m -CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_NUMA=y -# CONFIG_ACPI_CUSTOM_DSDT is not set -CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y -CONFIG_ACPI_TABLE_UPGRADE=y -# CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_PCI_SLOT=y -CONFIG_X86_PM_TIMER=y -CONFIG_ACPI_CONTAINER=y -CONFIG_ACPI_HOTPLUG_MEMORY=y -CONFIG_ACPI_HOTPLUG_IOAPIC=y -CONFIG_ACPI_SBS=m -CONFIG_ACPI_HED=y -# CONFIG_ACPI_CUSTOM_METHOD is not set -CONFIG_ACPI_BGRT=y -# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set -CONFIG_ACPI_NFIT=m -CONFIG_HAVE_ACPI_APEI=y -CONFIG_HAVE_ACPI_APEI_NMI=y -CONFIG_ACPI_APEI=y -CONFIG_ACPI_APEI_GHES=y -CONFIG_ACPI_APEI_PCIEAER=y -CONFIG_ACPI_APEI_MEMORY_FAILURE=y -# CONFIG_ACPI_APEI_EINJ is not set -# CONFIG_ACPI_APEI_ERST_DEBUG is not set -CONFIG_DPTF_POWER=m -CONFIG_ACPI_WATCHDOG=y -CONFIG_ACPI_EXTLOG=m -CONFIG_PMIC_OPREGION=y -# CONFIG_XPOWER_PMIC_OPREGION is not set -# CONFIG_BXT_WC_PMIC_OPREGION is not set -CONFIG_ACPI_CONFIGFS=m -CONFIG_SFI=y - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y - -# -# CPU frequency scaling drivers -# -CONFIG_X86_INTEL_PSTATE=y -CONFIG_X86_PCC_CPUFREQ=m -CONFIG_X86_ACPI_CPUFREQ=m -CONFIG_X86_ACPI_CPUFREQ_CPB=y -CONFIG_X86_POWERNOW_K8=m -CONFIG_X86_AMD_FREQ_SENSITIVITY=m -# CONFIG_X86_SPEEDSTEP_CENTRINO is not set -# CONFIG_X86_P4_CLOCKMOD is not set - -# -# shared options -# -# CONFIG_X86_SPEEDSTEP_LIB is not set - -# -# CPU Idle -# -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set -CONFIG_INTEL_IDLE=y - -# -# Bus options (PCI etc.) -# -CONFIG_PCI=y -CONFIG_PCI_DIRECT=y -CONFIG_PCI_MMCONFIG=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCIEPORTBUS=y -CONFIG_HOTPLUG_PCI_PCIE=y -CONFIG_PCIEAER=y -CONFIG_PCIE_ECRC=y -CONFIG_PCIEAER_INJECT=m -CONFIG_PCIEASPM=y -# CONFIG_PCIEASPM_DEBUG is not set -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set -# CONFIG_PCIEASPM_PERFORMANCE is not set -CONFIG_PCIE_PME=y -CONFIG_PCIE_DPC=y -CONFIG_PCIE_PTM=y -CONFIG_PCI_BUS_ADDR_T_64BIT=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -# CONFIG_PCI_DEBUG is not set -CONFIG_PCI_REALLOC_ENABLE_AUTO=y -CONFIG_PCI_STUB=m -CONFIG_HT_IRQ=y -CONFIG_PCI_ATS=y -CONFIG_PCI_LOCKLESS_CONFIG=y -CONFIG_PCI_IOV=y -CONFIG_PCI_PRI=y -CONFIG_PCI_PASID=y -CONFIG_PCI_LABEL=y -CONFIG_PCI_HYPERV=m -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_ACPI=y -CONFIG_HOTPLUG_PCI_ACPI_IBM=m -CONFIG_HOTPLUG_PCI_CPCI=y -CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m -CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m -CONFIG_HOTPLUG_PCI_SHPC=m - -# -# DesignWare PCI Core Support -# -# CONFIG_PCIE_DW_PLAT is not set - -# -# PCI host controller drivers -# -CONFIG_VMD=m - -# -# PCI Endpoint -# -# CONFIG_PCI_ENDPOINT is not set - -# -# PCI switch controller drivers -# -CONFIG_PCI_SW_SWITCHTEC=m -CONFIG_ISA_DMA_API=y -CONFIG_AMD_NB=y -CONFIG_PCCARD=m -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_CARDBUS=y - -# -# PC-card bridges -# -CONFIG_YENTA=m -CONFIG_YENTA_O2=y -CONFIG_YENTA_RICOH=y -CONFIG_YENTA_TI=y -CONFIG_YENTA_ENE_TUNE=y -CONFIG_YENTA_TOSHIBA=y -CONFIG_PD6729=m -CONFIG_I82092=m -CONFIG_PCCARD_NONSTATIC=y -CONFIG_RAPIDIO=y -CONFIG_RAPIDIO_TSI721=y -CONFIG_RAPIDIO_DISC_TIMEOUT=30 -CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y -CONFIG_RAPIDIO_DMA_ENGINE=y -# CONFIG_RAPIDIO_DEBUG is not set -CONFIG_RAPIDIO_ENUM_BASIC=m -CONFIG_RAPIDIO_CHMAN=m -CONFIG_RAPIDIO_MPORT_CDEV=m - -# -# RapidIO Switch drivers -# -CONFIG_RAPIDIO_TSI57X=y -CONFIG_RAPIDIO_CPS_XX=y -CONFIG_RAPIDIO_TSI568=y -CONFIG_RAPIDIO_CPS_GEN2=y -CONFIG_RAPIDIO_RXS_GEN3=m -CONFIG_X86_SYSFB=y - -# -# Executable file formats / Emulations -# -CONFIG_BINFMT_ELF=y -CONFIG_COMPAT_BINFMT_ELF=y -CONFIG_ELFCORE=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_SCRIPT=y -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=y -CONFIG_COREDUMP=y -CONFIG_IA32_EMULATION=y -CONFIG_IA32_AOUT=y -CONFIG_X86_X32=y -CONFIG_COMPAT_32=y -CONFIG_COMPAT=y -CONFIG_COMPAT_FOR_U64_ALIGNMENT=y -CONFIG_SYSVIPC_COMPAT=y -CONFIG_X86_DEV_DMA_OPS=y -CONFIG_NET=y -CONFIG_COMPAT_NETLINK_MESSAGES=y -CONFIG_NET_INGRESS=y -CONFIG_NET_EGRESS=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_DIAG=m -CONFIG_UNIX=m -CONFIG_UNIX_DIAG=m -CONFIG_TLS=m -CONFIG_XFRM=y -CONFIG_XFRM_OFFLOAD=y -CONFIG_XFRM_ALGO=m -CONFIG_XFRM_USER=m -CONFIG_XFRM_SUB_POLICY=y -CONFIG_XFRM_MIGRATE=y -CONFIG_XFRM_STATISTICS=y -CONFIG_XFRM_IPCOMP=m -CONFIG_NET_KEY=m -CONFIG_NET_KEY_MIGRATE=y -CONFIG_SMC=m -CONFIG_SMC_DIAG=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_FIB_TRIE_STATS=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_ROUTE_CLASSID=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE_DEMUX=m -CONFIG_NET_IP_TUNNEL=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_MROUTE_MULTIPLE_TABLES=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_NET_IPVTI=m -CONFIG_NET_UDP_TUNNEL=m -CONFIG_NET_FOU=m -CONFIG_NET_FOU_IP_TUNNELS=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_ESP_OFFLOAD=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -CONFIG_INET_UDP_DIAG=m -# CONFIG_INET_RAW_DIAG is not set -# CONFIG_INET_DIAG_DESTROY is not set -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_BIC=m -CONFIG_TCP_CONG_CUBIC=m -CONFIG_TCP_CONG_WESTWOOD=m -CONFIG_TCP_CONG_HTCP=m -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_VEGAS=m -CONFIG_TCP_CONG_NV=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -CONFIG_TCP_CONG_DCTCP=m -# CONFIG_TCP_CONG_CDG is not set -CONFIG_TCP_CONG_BBR=m -CONFIG_DEFAULT_RENO=y -CONFIG_DEFAULT_TCP_CONG="reno" -CONFIG_TCP_MD5SIG=y -CONFIG_IPV6=m -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_OPTIMISTIC_DAD=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_ESP_OFFLOAD=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_IPV6_ILA=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_VTI=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_SIT_6RD=y -CONFIG_IPV6_NDISC_NODETYPE=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_GRE=m -CONFIG_IPV6_FOU=m -CONFIG_IPV6_FOU_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_IPV6_MROUTE=y -CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y -CONFIG_IPV6_PIMSM_V2=y -CONFIG_IPV6_SEG6_LWTUNNEL=y -CONFIG_IPV6_SEG6_HMAC=y -# CONFIG_NETLABEL is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NETWORK_PHY_TIMESTAMPING=y -CONFIG_NETFILTER=y -CONFIG_NETFILTER_ADVANCED=y -CONFIG_BRIDGE_NETFILTER=m - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_INGRESS=y -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_ACCT=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_LOG_COMMON=m -CONFIG_NF_LOG_NETDEV=m -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_ZONES=y -CONFIG_NF_CONNTRACK_PROCFS=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CONNTRACK_TIMEOUT=y -CONFIG_NF_CONNTRACK_TIMESTAMP=y -CONFIG_NF_CONNTRACK_LABELS=y -CONFIG_NF_CT_PROTO_DCCP=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=y -CONFIG_NF_CT_PROTO_UDPLITE=y -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_BROADCAST=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_SNMP=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NF_CT_NETLINK_TIMEOUT=m -CONFIG_NF_CT_NETLINK_HELPER=m -CONFIG_NETFILTER_NETLINK_GLUE_CT=y -CONFIG_NF_NAT=m -CONFIG_NF_NAT_NEEDED=y -CONFIG_NF_NAT_PROTO_DCCP=y -CONFIG_NF_NAT_PROTO_UDPLITE=y -CONFIG_NF_NAT_PROTO_SCTP=y -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_SIP=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_REDIRECT=m -CONFIG_NETFILTER_SYNPROXY=m -CONFIG_NF_TABLES=m -CONFIG_NF_TABLES_INET=m -CONFIG_NF_TABLES_NETDEV=m -CONFIG_NFT_EXTHDR=m -CONFIG_NFT_META=m -CONFIG_NFT_RT=m -CONFIG_NFT_NUMGEN=m -CONFIG_NFT_CT=m -CONFIG_NFT_SET_RBTREE=m -CONFIG_NFT_SET_HASH=m -CONFIG_NFT_SET_BITMAP=m -CONFIG_NFT_COUNTER=m -CONFIG_NFT_LOG=m -CONFIG_NFT_LIMIT=m -CONFIG_NFT_MASQ=m -CONFIG_NFT_REDIR=m -CONFIG_NFT_NAT=m -CONFIG_NFT_OBJREF=m -CONFIG_NFT_QUEUE=m -CONFIG_NFT_QUOTA=m -CONFIG_NFT_REJECT=m -CONFIG_NFT_REJECT_INET=m -CONFIG_NFT_COMPAT=m -CONFIG_NFT_HASH=m -CONFIG_NFT_FIB=m -CONFIG_NFT_FIB_INET=m -CONFIG_NF_DUP_NETDEV=m -CONFIG_NFT_DUP_NETDEV=m -CONFIG_NFT_FWD_NETDEV=m -CONFIG_NFT_FIB_NETDEV=m -CONFIG_NETFILTER_XTABLES=m - -# -# Xtables combined modules -# -CONFIG_NETFILTER_XT_MARK=m -CONFIG_NETFILTER_XT_CONNMARK=m -CONFIG_NETFILTER_XT_SET=m - -# -# Xtables targets -# -CONFIG_NETFILTER_XT_TARGET_AUDIT=m -CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_CT=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_HL=m -CONFIG_NETFILTER_XT_TARGET_HMARK=m -CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -CONFIG_NETFILTER_XT_TARGET_LED=m -CONFIG_NETFILTER_XT_TARGET_LOG=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_NAT=m -CONFIG_NETFILTER_XT_TARGET_NETMAP=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -CONFIG_NETFILTER_XT_TARGET_RATEEST=m -CONFIG_NETFILTER_XT_TARGET_REDIRECT=m -CONFIG_NETFILTER_XT_TARGET_TEE=m -CONFIG_NETFILTER_XT_TARGET_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_TRACE=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m - -# -# Xtables matches -# -CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -CONFIG_NETFILTER_XT_MATCH_BPF=m -CONFIG_NETFILTER_XT_MATCH_CGROUP=m -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_CPU=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ECN=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_HL=m -CONFIG_NETFILTER_XT_MATCH_IPCOMP=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_IPVS=m -CONFIG_NETFILTER_XT_MATCH_L2TP=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_NFACCT=m -CONFIG_NETFILTER_XT_MATCH_OSF=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_IP_SET=m -CONFIG_IP_SET_MAX=256 -CONFIG_IP_SET_BITMAP_IP=m -CONFIG_IP_SET_BITMAP_IPMAC=m -CONFIG_IP_SET_BITMAP_PORT=m -CONFIG_IP_SET_HASH_IP=m -CONFIG_IP_SET_HASH_IPMARK=m -CONFIG_IP_SET_HASH_IPPORT=m -CONFIG_IP_SET_HASH_IPPORTIP=m -CONFIG_IP_SET_HASH_IPPORTNET=m -CONFIG_IP_SET_HASH_IPMAC=m -CONFIG_IP_SET_HASH_MAC=m -CONFIG_IP_SET_HASH_NETPORTNET=m -CONFIG_IP_SET_HASH_NET=m -CONFIG_IP_SET_HASH_NETNET=m -CONFIG_IP_SET_HASH_NETPORT=m -CONFIG_IP_SET_HASH_NETIFACE=m -CONFIG_IP_SET_LIST_SET=m -CONFIG_IP_VS=m -CONFIG_IP_VS_IPV6=y -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_AH_ESP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_PROTO_SCTP=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_FO=m -CONFIG_IP_VS_OVF=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS SH scheduler -# -CONFIG_IP_VS_SH_TAB_BITS=8 - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m -CONFIG_IP_VS_NFCT=y -CONFIG_IP_VS_PE_SIP=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV4=m -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_SOCKET_IPV4=m -CONFIG_NF_TABLES_IPV4=m -CONFIG_NFT_CHAIN_ROUTE_IPV4=m -CONFIG_NFT_REJECT_IPV4=m -CONFIG_NFT_DUP_IPV4=m -CONFIG_NFT_FIB_IPV4=m -CONFIG_NF_TABLES_ARP=m -CONFIG_NF_DUP_IPV4=m -CONFIG_NF_LOG_ARP=m -CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m -CONFIG_NF_NAT_IPV4=m -CONFIG_NFT_CHAIN_NAT_IPV4=m -CONFIG_NF_NAT_MASQUERADE_IPV4=m -CONFIG_NFT_MASQ_IPV4=m -CONFIG_NFT_REDIR_IPV4=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PROTO_GRE=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_RPFILTER=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_SYNPROXY=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -# CONFIG_IP_NF_SECURITY is not set -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV6=m -CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_NF_SOCKET_IPV6=m -CONFIG_NF_TABLES_IPV6=m -CONFIG_NFT_CHAIN_ROUTE_IPV6=m -CONFIG_NFT_CHAIN_NAT_IPV6=m -CONFIG_NFT_MASQ_IPV6=m -CONFIG_NFT_REDIR_IPV6=m -CONFIG_NFT_REJECT_IPV6=m -CONFIG_NFT_DUP_IPV6=m -CONFIG_NFT_FIB_IPV6=m -CONFIG_NF_DUP_IPV6=m -CONFIG_NF_REJECT_IPV6=m -CONFIG_NF_LOG_IPV6=m -CONFIG_NF_NAT_IPV6=m -CONFIG_NF_NAT_MASQUERADE_IPV6=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RPFILTER=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_SYNPROXY=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -# CONFIG_IP6_NF_SECURITY is not set -CONFIG_IP6_NF_NAT=m -CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_IP6_NF_TARGET_NPT=m - -# -# DECnet: Netfilter Configuration -# -CONFIG_DECNET_NF_GRABULATOR=m -CONFIG_NF_TABLES_BRIDGE=m -CONFIG_NFT_BRIDGE_META=m -CONFIG_NFT_BRIDGE_REJECT=m -CONFIG_NF_LOG_BRIDGE=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_IP6=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_NFLOG=m -CONFIG_IP_DCCP=m -CONFIG_INET_DCCP_DIAG=m - -# -# DCCP CCIDs Configuration -# -# CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=y -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_TFRC_LIB=y - -# -# DCCP Kernel Hacking -# -# CONFIG_IP_DCCP_DEBUG is not set -# CONFIG_NET_DCCPPROBE is not set -CONFIG_IP_SCTP=m -# CONFIG_NET_SCTPPROBE is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set -CONFIG_SCTP_COOKIE_HMAC_MD5=y -CONFIG_SCTP_COOKIE_HMAC_SHA1=y -CONFIG_INET_SCTP_DIAG=m -CONFIG_RDS=m -CONFIG_RDS_RDMA=m -CONFIG_RDS_TCP=m -# CONFIG_RDS_DEBUG is not set -CONFIG_TIPC=m -CONFIG_TIPC_MEDIA_IB=y -CONFIG_TIPC_MEDIA_UDP=y -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_L2TP=m -# CONFIG_L2TP_DEBUGFS is not set -CONFIG_L2TP_V3=y -CONFIG_L2TP_IP=m -CONFIG_L2TP_ETH=m -CONFIG_STP=m -CONFIG_GARP=m -CONFIG_MRP=m -CONFIG_BRIDGE=m -CONFIG_BRIDGE_IGMP_SNOOPING=y -CONFIG_BRIDGE_VLAN_FILTERING=y -CONFIG_HAVE_NET_DSA=y -CONFIG_NET_DSA=m -CONFIG_NET_DSA_TAG_DSA=y -CONFIG_NET_DSA_TAG_EDSA=y -CONFIG_NET_DSA_TAG_KSZ=y -CONFIG_NET_DSA_TAG_LAN9303=y -CONFIG_NET_DSA_TAG_MTK=y -CONFIG_NET_DSA_TAG_TRAILER=y -CONFIG_NET_DSA_TAG_QCA=y -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_VLAN_8021Q_MVRP=y -CONFIG_DECNET=m -CONFIG_DECNET_ROUTER=y -CONFIG_LLC=m -CONFIG_LLC2=m -CONFIG_IPX=m -CONFIG_IPX_INTERN=y -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_X25=m -CONFIG_LAPB=m -CONFIG_PHONET=m -CONFIG_6LOWPAN=m -# CONFIG_6LOWPAN_DEBUGFS is not set -CONFIG_6LOWPAN_NHC=m -CONFIG_6LOWPAN_NHC_DEST=m -CONFIG_6LOWPAN_NHC_FRAGMENT=m -CONFIG_6LOWPAN_NHC_HOP=m -CONFIG_6LOWPAN_NHC_IPV6=m -CONFIG_6LOWPAN_NHC_MOBILITY=m -CONFIG_6LOWPAN_NHC_ROUTING=m -CONFIG_6LOWPAN_NHC_UDP=m -CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m -CONFIG_6LOWPAN_GHC_UDP=m -CONFIG_6LOWPAN_GHC_ICMPV6=m -CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m -CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m -CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m -CONFIG_IEEE802154=m -CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y -CONFIG_IEEE802154_SOCKET=m -CONFIG_IEEE802154_6LOWPAN=m -CONFIG_MAC802154=m -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFB=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_SCH_MQPRIO=m -CONFIG_NET_SCH_CHOKE=m -CONFIG_NET_SCH_QFQ=m -CONFIG_NET_SCH_CODEL=m -CONFIG_NET_SCH_FQ_CODEL=m -CONFIG_NET_SCH_FQ=m -CONFIG_NET_SCH_HHF=m -CONFIG_NET_SCH_PIE=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_SCH_PLUG=m -# CONFIG_NET_SCH_DEFAULT is not set - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_CLS_U32_PERF=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -CONFIG_NET_CLS_CGROUP=m -CONFIG_NET_CLS_BPF=m -CONFIG_NET_CLS_FLOWER=m -CONFIG_NET_CLS_MATCHALL=m -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_STACK=32 -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=m -CONFIG_NET_EMATCH_META=m -CONFIG_NET_EMATCH_TEXT=m -CONFIG_NET_EMATCH_CANID=m -CONFIG_NET_EMATCH_IPSET=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=m -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -CONFIG_NET_ACT_SAMPLE=m -CONFIG_NET_ACT_IPT=m -CONFIG_NET_ACT_NAT=m -CONFIG_NET_ACT_PEDIT=m -# CONFIG_NET_ACT_SIMP is not set -CONFIG_NET_ACT_SKBEDIT=m -CONFIG_NET_ACT_CSUM=m -CONFIG_NET_ACT_VLAN=m -CONFIG_NET_ACT_BPF=m -CONFIG_NET_ACT_CONNMARK=m -CONFIG_NET_ACT_SKBMOD=m -CONFIG_NET_ACT_IFE=m -CONFIG_NET_ACT_TUNNEL_KEY=m -CONFIG_NET_IFE_SKBMARK=m -CONFIG_NET_IFE_SKBPRIO=m -CONFIG_NET_IFE_SKBTCINDEX=m -CONFIG_NET_CLS_IND=y -CONFIG_NET_SCH_FIFO=y -CONFIG_DCB=y -CONFIG_DNS_RESOLVER=y -CONFIG_BATMAN_ADV=m -# CONFIG_BATMAN_ADV_BATMAN_V is not set -CONFIG_BATMAN_ADV_BLA=y -CONFIG_BATMAN_ADV_DAT=y -CONFIG_BATMAN_ADV_NC=y -CONFIG_BATMAN_ADV_MCAST=y -CONFIG_BATMAN_ADV_DEBUGFS=y -# CONFIG_BATMAN_ADV_DEBUG is not set -CONFIG_OPENVSWITCH=m -CONFIG_OPENVSWITCH_GRE=m -CONFIG_OPENVSWITCH_VXLAN=m -CONFIG_OPENVSWITCH_GENEVE=m -CONFIG_VSOCKETS=m -CONFIG_VMWARE_VMCI_VSOCKETS=m -CONFIG_VIRTIO_VSOCKETS=m -CONFIG_VIRTIO_VSOCKETS_COMMON=m -CONFIG_HYPERV_VSOCKETS=m -CONFIG_NETLINK_DIAG=m -CONFIG_MPLS=y -CONFIG_NET_MPLS_GSO=m -CONFIG_MPLS_ROUTING=m -CONFIG_MPLS_IPTUNNEL=m -CONFIG_NET_NSH=m -CONFIG_HSR=m -CONFIG_NET_SWITCHDEV=y -CONFIG_NET_L3_MASTER_DEV=y -# CONFIG_NET_NCSI is not set -CONFIG_RPS=y -CONFIG_RFS_ACCEL=y -CONFIG_XPS=y -CONFIG_CGROUP_NET_PRIO=y -CONFIG_CGROUP_NET_CLASSID=y -CONFIG_NET_RX_BUSY_POLL=y -CONFIG_BQL=y -CONFIG_BPF_JIT=y -# CONFIG_BPF_STREAM_PARSER is not set -CONFIG_NET_FLOW_LIMIT=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NET_TCPPROBE is not set -# CONFIG_NET_DROP_MONITOR is not set -CONFIG_HAMRADIO=y - -# -# Packet Radio protocols -# -CONFIG_AX25=m -CONFIG_AX25_DAMA_SLAVE=y -CONFIG_NETROM=m -CONFIG_ROSE=m - -# -# AX.25 network device drivers -# -CONFIG_MKISS=m -CONFIG_6PACK=m -CONFIG_BPQETHER=m -CONFIG_BAYCOM_SER_FDX=m -CONFIG_BAYCOM_SER_HDX=m -CONFIG_BAYCOM_PAR=m -CONFIG_YAM=m -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_GW=m - -# -# CAN Device Drivers -# -CONFIG_CAN_VCAN=m -CONFIG_CAN_VXCAN=m -CONFIG_CAN_SLCAN=m -CONFIG_CAN_DEV=m -CONFIG_CAN_CALC_BITTIMING=y -CONFIG_CAN_LEDS=y -CONFIG_CAN_JANZ_ICAN3=m -CONFIG_CAN_C_CAN=m -CONFIG_CAN_C_CAN_PLATFORM=m -CONFIG_CAN_C_CAN_PCI=m -CONFIG_CAN_CC770=m -CONFIG_CAN_CC770_ISA=m -CONFIG_CAN_CC770_PLATFORM=m -CONFIG_CAN_IFI_CANFD=m -CONFIG_CAN_M_CAN=m -CONFIG_CAN_PEAK_PCIEFD=m -CONFIG_CAN_SJA1000=m -CONFIG_CAN_SJA1000_ISA=m -CONFIG_CAN_SJA1000_PLATFORM=m -CONFIG_CAN_EMS_PCMCIA=m -CONFIG_CAN_EMS_PCI=m -CONFIG_CAN_PEAK_PCMCIA=m -CONFIG_CAN_PEAK_PCI=m -CONFIG_CAN_PEAK_PCIEC=y -CONFIG_CAN_KVASER_PCI=m -CONFIG_CAN_PLX_PCI=m -CONFIG_CAN_SOFTING=m -CONFIG_CAN_SOFTING_CS=m - -# -# CAN SPI interfaces -# -CONFIG_CAN_HI311X=m -CONFIG_CAN_MCP251X=m - -# -# CAN USB interfaces -# -CONFIG_CAN_EMS_USB=m -CONFIG_CAN_ESD_USB2=m -CONFIG_CAN_GS_USB=m -CONFIG_CAN_KVASER_USB=m -CONFIG_CAN_PEAK_USB=m -CONFIG_CAN_8DEV_USB=m -CONFIG_CAN_MCBA_USB=m -# CONFIG_CAN_DEBUG_DEVICES is not set -CONFIG_BT=m -CONFIG_BT_BREDR=y -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_CMTP=m -CONFIG_BT_HIDP=m -CONFIG_BT_HS=y -CONFIG_BT_LE=y -CONFIG_BT_6LOWPAN=m -CONFIG_BT_LEDS=y -# CONFIG_BT_SELFTEST is not set -CONFIG_BT_DEBUGFS=y - -# -# Bluetooth device drivers -# -CONFIG_BT_INTEL=m -CONFIG_BT_BCM=m -CONFIG_BT_RTL=m -CONFIG_BT_QCA=m -CONFIG_BT_HCIBTUSB=m -CONFIG_BT_HCIBTUSB_BCM=y -CONFIG_BT_HCIBTUSB_RTL=y -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_SERDEV=y -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_NOKIA=m -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_ATH3K=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIUART_3WIRE=y -CONFIG_BT_HCIUART_INTEL=y -CONFIG_BT_HCIUART_BCM=y -CONFIG_BT_HCIUART_QCA=y -CONFIG_BT_HCIUART_AG6XX=y -CONFIG_BT_HCIUART_MRVL=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -CONFIG_BT_MRVL=m -CONFIG_BT_MRVL_SDIO=m -CONFIG_BT_ATH3K=m -CONFIG_BT_WILINK=m -CONFIG_AF_RXRPC=m -CONFIG_AF_RXRPC_IPV6=y -# CONFIG_AF_RXRPC_INJECT_LOSS is not set -# CONFIG_AF_RXRPC_DEBUG is not set -# CONFIG_RXKAD is not set -CONFIG_AF_KCM=m -CONFIG_STREAM_PARSER=m -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -CONFIG_WIRELESS_EXT=y -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_WEXT_SPY=y -CONFIG_WEXT_PRIV=y -CONFIG_CFG80211=m -CONFIG_NL80211_TESTMODE=y -# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set -CONFIG_CFG80211_DEFAULT_PS=y -# CONFIG_CFG80211_DEBUGFS is not set -# CONFIG_CFG80211_INTERNAL_REGDB is not set -CONFIG_CFG80211_CRDA_SUPPORT=y -CONFIG_CFG80211_WEXT=y -CONFIG_CFG80211_WEXT_EXPORT=y -CONFIG_LIB80211=m -CONFIG_LIB80211_CRYPT_WEP=m -CONFIG_LIB80211_CRYPT_CCMP=m -CONFIG_LIB80211_CRYPT_TKIP=m -# CONFIG_LIB80211_DEBUG is not set -CONFIG_MAC80211=m -CONFIG_MAC80211_HAS_RC=y -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_MINSTREL_HT=y -# CONFIG_MAC80211_RC_MINSTREL_VHT is not set -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" -CONFIG_MAC80211_MESH=y -CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_MESSAGE_TRACING is not set -# CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 -CONFIG_WIMAX=m -CONFIG_WIMAX_DEBUG_LEVEL=8 -CONFIG_RFKILL=m -CONFIG_RFKILL_LEDS=y -CONFIG_RFKILL_INPUT=y -CONFIG_RFKILL_GPIO=m -CONFIG_NET_9P=m -CONFIG_NET_9P_VIRTIO=m -CONFIG_NET_9P_RDMA=m -# CONFIG_NET_9P_DEBUG is not set -CONFIG_CAIF=m -# CONFIG_CAIF_DEBUG is not set -CONFIG_CAIF_NETDEV=m -CONFIG_CAIF_USB=m -CONFIG_CEPH_LIB=m -# CONFIG_CEPH_LIB_PRETTYDEBUG is not set -CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y -CONFIG_NFC=m -CONFIG_NFC_DIGITAL=m -CONFIG_NFC_NCI=m -CONFIG_NFC_NCI_SPI=m -CONFIG_NFC_NCI_UART=m -CONFIG_NFC_HCI=m -CONFIG_NFC_SHDLC=y - -# -# Near Field Communication (NFC) devices -# -CONFIG_NFC_TRF7970A=m -CONFIG_NFC_MEI_PHY=m -CONFIG_NFC_SIM=m -CONFIG_NFC_PORT100=m -CONFIG_NFC_FDP=m -CONFIG_NFC_FDP_I2C=m -CONFIG_NFC_PN544=m -CONFIG_NFC_PN544_I2C=m -CONFIG_NFC_PN544_MEI=m -CONFIG_NFC_PN533=m -CONFIG_NFC_PN533_USB=m -CONFIG_NFC_PN533_I2C=m -CONFIG_NFC_MICROREAD=m -CONFIG_NFC_MICROREAD_I2C=m -CONFIG_NFC_MICROREAD_MEI=m -CONFIG_NFC_MRVL=m -CONFIG_NFC_MRVL_USB=m -CONFIG_NFC_MRVL_UART=m -CONFIG_NFC_MRVL_I2C=m -CONFIG_NFC_MRVL_SPI=m -CONFIG_NFC_ST21NFCA=m -CONFIG_NFC_ST21NFCA_I2C=m -CONFIG_NFC_ST_NCI=m -CONFIG_NFC_ST_NCI_I2C=m -CONFIG_NFC_ST_NCI_SPI=m -CONFIG_NFC_NXP_NCI=m -CONFIG_NFC_NXP_NCI_I2C=m -CONFIG_NFC_S3FWRN5=m -CONFIG_NFC_S3FWRN5_I2C=m -CONFIG_NFC_ST95HF=m -CONFIG_PSAMPLE=m -CONFIG_NET_IFE=m -CONFIG_LWTUNNEL=y -CONFIG_LWTUNNEL_BPF=y -CONFIG_DST_CACHE=y -CONFIG_GRO_CELLS=y -CONFIG_NET_DEVLINK=m -CONFIG_MAY_USE_DEVLINK=m -CONFIG_HAVE_EBPF_JIT=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -# CONFIG_UEVENT_HELPER is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_EXTRA_FIRMWARE="" -CONFIG_FW_LOADER_USER_HELPER=y -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -CONFIG_WANT_DEV_COREDUMP=y -CONFIG_ALLOW_DEV_COREDUMP=y -CONFIG_DEV_COREDUMP=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set -CONFIG_TEST_ASYNC_DRIVER_PROBE=m -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_GENERIC_CPU_DEVICES is not set -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=m -CONFIG_REGMAP_SPI=y -CONFIG_REGMAP_SPMI=m -CONFIG_REGMAP_W1=m -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_IRQ=y -CONFIG_DMA_SHARED_BUFFER=y -# CONFIG_DMA_FENCE_TRACE is not set -# CONFIG_DMA_CMA is not set - -# -# Bus devices -# -CONFIG_CONNECTOR=m -CONFIG_MTD=m -CONFIG_MTD_TESTS=m -CONFIG_MTD_REDBOOT_PARTS=m -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -CONFIG_MTD_CMDLINE_PARTS=m -CONFIG_MTD_AR7_PARTS=m - -# -# Partition parsers -# - -# -# User Modules And Translation Layers -# -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -CONFIG_NFTL_RW=y -CONFIG_INFTL=m -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -CONFIG_SM_FTL=m -CONFIG_MTD_OOPS=m -CONFIG_MTD_SWAP=m -# CONFIG_MTD_PARTITIONED_MASTER is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_CFI_UTIL=m -CONFIG_MTD_RAM=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -# CONFIG_MTD_PHYSMAP_COMPAT is not set -CONFIG_MTD_SBC_GXX=m -CONFIG_MTD_AMD76XROM=m -CONFIG_MTD_ICHXROM=m -CONFIG_MTD_ESB2ROM=m -CONFIG_MTD_CK804XROM=m -CONFIG_MTD_SCB2_FLASH=m -CONFIG_MTD_NETtel=m -CONFIG_MTD_L440GX=m -CONFIG_MTD_PCI=m -CONFIG_MTD_PCMCIA=m -# CONFIG_MTD_PCMCIA_ANONYMOUS is not set -CONFIG_MTD_GPIO_ADDR=m -CONFIG_MTD_INTEL_VR_NOR=m -CONFIG_MTD_PLATRAM=m -CONFIG_MTD_LATCH_ADDR=m - -# -# Self-contained MTD device drivers -# -CONFIG_MTD_PMC551=m -CONFIG_MTD_PMC551_BUGFIX=y -# CONFIG_MTD_PMC551_DEBUG is not set -CONFIG_MTD_DATAFLASH=m -CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y -CONFIG_MTD_DATAFLASH_OTP=y -CONFIG_MTD_M25P80=m -CONFIG_MTD_MCHP23K256=m -CONFIG_MTD_SST25L=m -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTDRAM_TOTAL_SIZE=4096 -CONFIG_MTDRAM_ERASE_SIZE=128 -CONFIG_MTD_BLOCK2MTD=m - -# -# Disk-On-Chip Device Drivers -# -CONFIG_MTD_DOCG3=m -CONFIG_BCH_CONST_M=14 -CONFIG_BCH_CONST_T=4 -CONFIG_MTD_NAND_ECC=m -CONFIG_MTD_NAND_ECC_SMC=y -CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_BCH=m -CONFIG_MTD_NAND_ECC_BCH=y -CONFIG_MTD_SM_COMMON=m -CONFIG_MTD_NAND_DENALI=m -CONFIG_MTD_NAND_DENALI_PCI=m -CONFIG_MTD_NAND_GPIO=m -# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set -CONFIG_MTD_NAND_RICOH=m -CONFIG_MTD_NAND_DISKONCHIP=m -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x0 -CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y -CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y -CONFIG_MTD_NAND_DOCG4=m -CONFIG_MTD_NAND_CAFE=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_PLATFORM=m -CONFIG_MTD_ONENAND=m -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -CONFIG_MTD_ONENAND_GENERIC=m -CONFIG_MTD_ONENAND_OTP=y -CONFIG_MTD_ONENAND_2X_PROGRAM=y - -# -# LPDDR & LPDDR2 PCM memory drivers -# -CONFIG_MTD_LPDDR=m -CONFIG_MTD_QINFO_PROBE=m -CONFIG_MTD_SPI_NOR=m -CONFIG_MTD_MT81xx_NOR=m -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_FASTMAP=y -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_OF is not set -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_SERIAL=m -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -CONFIG_PARPORT_PC_PCMCIA=m -# CONFIG_PARPORT_GSC is not set -CONFIG_PARPORT_AX88796=m -CONFIG_PARPORT_1284=y -CONFIG_PARPORT_NOT_PC=y -CONFIG_PNP=y -# CONFIG_PNP_DEBUG_MESSAGES is not set - -# -# Protocols -# -CONFIG_PNPACPI=y -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_NULL_BLK is not set -CONFIG_BLK_DEV_FD=m -CONFIG_PARIDE=m - -# -# Parallel IDE high-level drivers -# -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m - -# -# Parallel IDE protocol modules -# -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m -CONFIG_ZRAM=m -CONFIG_ZRAM_WRITEBACK=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_DRBD=m -# CONFIG_DRBD_FAULT_INJECTION is not set -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_SKD=m -CONFIG_BLK_DEV_SX8=m -CONFIG_BLK_DEV_RAM=m -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_BLK_DEV_RAM_DAX=y -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -CONFIG_CDROM_PKTCDVD_WCACHE=y -CONFIG_ATA_OVER_ETH=m -CONFIG_VIRTIO_BLK=m -# CONFIG_VIRTIO_BLK_SCSI is not set -CONFIG_BLK_DEV_RBD=m -CONFIG_BLK_DEV_RSXX=m -CONFIG_NVME_CORE=m -CONFIG_BLK_DEV_NVME=m -CONFIG_NVME_FABRICS=m -CONFIG_NVME_RDMA=m -CONFIG_NVME_FC=m -CONFIG_NVME_TARGET=m -CONFIG_NVME_TARGET_LOOP=m -CONFIG_NVME_TARGET_RDMA=m -CONFIG_NVME_TARGET_FC=m -CONFIG_NVME_TARGET_FCLOOP=m - -# -# Misc devices -# -CONFIG_SENSORS_LIS3LV02D=m -CONFIG_AD525X_DPOT=m -CONFIG_AD525X_DPOT_I2C=m -CONFIG_AD525X_DPOT_SPI=m -# CONFIG_DUMMY_IRQ is not set -CONFIG_IBM_ASM=m -CONFIG_PHANTOM=m -CONFIG_SGI_IOC4=m -CONFIG_TIFM_CORE=m -CONFIG_TIFM_7XX1=m -CONFIG_ICS932S401=m -CONFIG_ENCLOSURE_SERVICES=m -CONFIG_HP_ILO=m -CONFIG_APDS9802ALS=m -CONFIG_ISL29003=m -CONFIG_ISL29020=m -CONFIG_SENSORS_TSL2550=m -CONFIG_SENSORS_BH1770=m -CONFIG_SENSORS_APDS990X=m -CONFIG_HMC6352=m -CONFIG_DS1682=m -CONFIG_TI_DAC7512=m -CONFIG_VMWARE_BALLOON=m -CONFIG_USB_SWITCH_FSA9480=m -CONFIG_LATTICE_ECP3_CONFIG=m -CONFIG_SRAM=y -CONFIG_PCI_ENDPOINT_TEST=m -CONFIG_C2PORT=m -CONFIG_C2PORT_DURAMAR_2150=m - -# -# EEPROM support -# -CONFIG_EEPROM_AT24=m -CONFIG_EEPROM_AT25=m -CONFIG_EEPROM_LEGACY=m -CONFIG_EEPROM_MAX6875=m -CONFIG_EEPROM_93CX6=m -CONFIG_EEPROM_93XX46=m -CONFIG_EEPROM_IDT_89HPESX=m -CONFIG_CB710_CORE=m -# CONFIG_CB710_DEBUG is not set -CONFIG_CB710_DEBUG_ASSUMPTIONS=y - -# -# Texas Instruments shared transport line discipline -# -CONFIG_TI_ST=m -CONFIG_SENSORS_LIS3_I2C=m - -# -# Altera FPGA firmware download module -# -CONFIG_ALTERA_STAPL=m -CONFIG_INTEL_MEI=y -CONFIG_INTEL_MEI_ME=y -CONFIG_INTEL_MEI_TXE=m -CONFIG_VMWARE_VMCI=m - -# -# Intel MIC Bus Driver -# -CONFIG_INTEL_MIC_BUS=m - -# -# SCIF Bus Driver -# -CONFIG_SCIF_BUS=m - -# -# VOP Bus Driver -# -CONFIG_VOP_BUS=m - -# -# Intel MIC Host Driver -# -CONFIG_INTEL_MIC_HOST=m - -# -# Intel MIC Card Driver -# -CONFIG_INTEL_MIC_CARD=m - -# -# SCIF Driver -# -CONFIG_SCIF=m - -# -# Intel MIC Coprocessor State Management (COSM) Drivers -# -CONFIG_MIC_COSM=m - -# -# VOP Driver -# -CONFIG_VOP=m -CONFIG_VHOST_RING=m -CONFIG_GENWQE=m -CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0 -CONFIG_ECHO=m -# CONFIG_CXL_BASE is not set -# CONFIG_CXL_AFU_DRIVER_OPS is not set -# CONFIG_CXL_LIB is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI_MOD=m -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_MQ_DEFAULT is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_ENCLOSURE=m -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -CONFIG_SCSI_SAS_ATA=y -CONFIG_SCSI_SAS_HOST_SMP=y -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_LOWLEVEL=y -CONFIG_ISCSI_TCP=m -CONFIG_ISCSI_BOOT_SYSFS=m -CONFIG_SCSI_CXGB3_ISCSI=m -CONFIG_SCSI_CXGB4_ISCSI=m -CONFIG_SCSI_BNX2_ISCSI=m -CONFIG_SCSI_BNX2X_FCOE=m -CONFIG_BE2ISCSI=m -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_HPSA=m -CONFIG_SCSI_3W_9XXX=m -CONFIG_SCSI_3W_SAS=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=4 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=4 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -CONFIG_SCSI_MVSAS=m -# CONFIG_SCSI_MVSAS_DEBUG is not set -CONFIG_SCSI_MVSAS_TASKLET=y -CONFIG_SCSI_MVUMI=m -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_ARCMSR=m -CONFIG_SCSI_ESAS2R=m -CONFIG_MEGARAID_NEWGEN=y -CONFIG_MEGARAID_MM=m -CONFIG_MEGARAID_MAILBOX=m -CONFIG_MEGARAID_LEGACY=m -CONFIG_MEGARAID_SAS=m -CONFIG_SCSI_MPT3SAS=m -CONFIG_SCSI_MPT2SAS_MAX_SGE=128 -CONFIG_SCSI_MPT3SAS_MAX_SGE=128 -CONFIG_SCSI_MPT2SAS=m -CONFIG_SCSI_SMARTPQI=m -CONFIG_SCSI_UFSHCD=m -CONFIG_SCSI_UFSHCD_PCI=m -CONFIG_SCSI_UFS_DWC_TC_PCI=m -CONFIG_SCSI_UFSHCD_PLATFORM=m -CONFIG_SCSI_UFS_DWC_TC_PLATFORM=m -CONFIG_SCSI_HPTIOP=m -CONFIG_SCSI_BUSLOGIC=m -CONFIG_SCSI_FLASHPOINT=y -CONFIG_VMWARE_PVSCSI=m -CONFIG_HYPERV_STORAGE=m -CONFIG_LIBFC=m -CONFIG_LIBFCOE=m -CONFIG_FCOE=m -CONFIG_FCOE_FNIC=m -CONFIG_SCSI_SNIC=m -# CONFIG_SCSI_SNIC_DEBUG_FS is not set -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_ISCI=m -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -# CONFIG_SCSI_IZIP_EPP16 is not set -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_STEX=m -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -CONFIG_SCSI_SYM53C8XX_MMIO=y -CONFIG_SCSI_IPR=m -# CONFIG_SCSI_IPR_TRACE is not set -# CONFIG_SCSI_IPR_DUMP is not set -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_QLA_FC=m -CONFIG_TCM_QLA2XXX=m -# CONFIG_TCM_QLA2XXX_DEBUG is not set -CONFIG_SCSI_QLA_ISCSI=m -CONFIG_QEDI=m -CONFIG_QEDF=m -CONFIG_SCSI_LPFC=m -# CONFIG_SCSI_LPFC_DEBUG_FS is not set -CONFIG_SCSI_DC395x=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_WD719X=m -# CONFIG_SCSI_DEBUG is not set -CONFIG_SCSI_PMCRAID=m -CONFIG_SCSI_PM8001=m -CONFIG_SCSI_BFA_FC=m -CONFIG_SCSI_VIRTIO=m -CONFIG_SCSI_CHELSIO_FCOE=m -CONFIG_SCSI_LOWLEVEL_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_QLOGIC=m -CONFIG_PCMCIA_SYM53C500=m -CONFIG_SCSI_DH=y -CONFIG_SCSI_DH_RDAC=m -CONFIG_SCSI_DH_HP_SW=m -CONFIG_SCSI_DH_EMC=m -CONFIG_SCSI_DH_ALUA=m -CONFIG_SCSI_OSD_INITIATOR=m -CONFIG_SCSI_OSD_ULD=m -CONFIG_SCSI_OSD_DPRINT_SENSE=1 -# CONFIG_SCSI_OSD_DEBUG is not set -CONFIG_ATA=m -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_ATA_VERBOSE_ERROR=y -CONFIG_ATA_ACPI=y -CONFIG_SATA_ZPODD=y -CONFIG_SATA_PMP=y - -# -# Controllers with non-SFF native interface -# -CONFIG_SATA_AHCI=m -CONFIG_SATA_AHCI_PLATFORM=m -CONFIG_SATA_INIC162X=m -CONFIG_SATA_ACARD_AHCI=m -CONFIG_SATA_SIL24=m -CONFIG_ATA_SFF=y - -# -# SFF controllers with custom DMA interface -# -CONFIG_PDC_ADMA=m -CONFIG_SATA_QSTOR=m -CONFIG_SATA_SX4=m -CONFIG_ATA_BMDMA=y - -# -# SATA SFF controllers with BMDMA -# -CONFIG_ATA_PIIX=m -CONFIG_SATA_DWC=m -# CONFIG_SATA_DWC_OLD_DMA is not set -# CONFIG_SATA_DWC_DEBUG is not set -CONFIG_SATA_MV=m -CONFIG_SATA_NV=m -CONFIG_SATA_PROMISE=m -CONFIG_SATA_SIL=m -CONFIG_SATA_SIS=m -CONFIG_SATA_SVW=m -CONFIG_SATA_ULI=m -CONFIG_SATA_VIA=m -CONFIG_SATA_VITESSE=m - -# -# PATA SFF controllers with BMDMA -# -CONFIG_PATA_ALI=m -CONFIG_PATA_AMD=m -CONFIG_PATA_ARTOP=m -CONFIG_PATA_ATIIXP=m -CONFIG_PATA_ATP867X=m -CONFIG_PATA_CMD64X=m -CONFIG_PATA_CYPRESS=m -CONFIG_PATA_EFAR=m -CONFIG_PATA_HPT366=m -CONFIG_PATA_HPT37X=m -CONFIG_PATA_HPT3X2N=m -CONFIG_PATA_HPT3X3=m -CONFIG_PATA_HPT3X3_DMA=y -CONFIG_PATA_IT8213=m -CONFIG_PATA_IT821X=m -CONFIG_PATA_JMICRON=m -CONFIG_PATA_MARVELL=m -CONFIG_PATA_NETCELL=m -CONFIG_PATA_NINJA32=m -CONFIG_PATA_NS87415=m -CONFIG_PATA_OLDPIIX=m -CONFIG_PATA_OPTIDMA=m -CONFIG_PATA_PDC2027X=m -CONFIG_PATA_PDC_OLD=m -CONFIG_PATA_RADISYS=m -CONFIG_PATA_RDC=m -CONFIG_PATA_SCH=m -CONFIG_PATA_SERVERWORKS=m -CONFIG_PATA_SIL680=m -CONFIG_PATA_SIS=m -CONFIG_PATA_TOSHIBA=m -CONFIG_PATA_TRIFLEX=m -CONFIG_PATA_VIA=m -CONFIG_PATA_WINBOND=m - -# -# PIO-only SFF controllers -# -CONFIG_PATA_CMD640_PCI=m -CONFIG_PATA_MPIIX=m -CONFIG_PATA_NS87410=m -CONFIG_PATA_OPTI=m -CONFIG_PATA_PCMCIA=m -CONFIG_PATA_RZ1000=m - -# -# Generic fallback / legacy drivers -# -CONFIG_PATA_ACPI=m -CONFIG_ATA_GENERIC=m -CONFIG_PATA_LEGACY=m -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_MD_CLUSTER=m -CONFIG_BCACHE=m -# CONFIG_BCACHE_DEBUG is not set -# CONFIG_BCACHE_CLOSURES_DEBUG is not set -CONFIG_BLK_DEV_DM_BUILTIN=y -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_MQ_DEFAULT is not set -# CONFIG_DM_DEBUG is not set -CONFIG_DM_BUFIO=m -# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set -CONFIG_DM_BIO_PRISON=m -CONFIG_DM_PERSISTENT_DATA=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_THIN_PROVISIONING=m -CONFIG_DM_CACHE=m -CONFIG_DM_CACHE_SMQ=m -CONFIG_DM_ERA=m -CONFIG_DM_MIRROR=m -CONFIG_DM_LOG_USERSPACE=m -CONFIG_DM_RAID=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_QL=m -CONFIG_DM_MULTIPATH_ST=m -CONFIG_DM_DELAY=m -CONFIG_DM_UEVENT=y -CONFIG_DM_FLAKEY=m -CONFIG_DM_VERITY=m -# CONFIG_DM_VERITY_FEC is not set -CONFIG_DM_SWITCH=m -CONFIG_DM_LOG_WRITES=m -CONFIG_DM_INTEGRITY=m -CONFIG_DM_ZONED=m -CONFIG_TARGET_CORE=m -CONFIG_TCM_IBLOCK=m -CONFIG_TCM_FILEIO=m -CONFIG_TCM_PSCSI=m -CONFIG_TCM_USER2=m -CONFIG_LOOPBACK_TARGET=m -CONFIG_TCM_FC=m -CONFIG_ISCSI_TARGET=m -CONFIG_ISCSI_TARGET_CXGB4=m -CONFIG_SBP_TARGET=m -CONFIG_FUSION=y -CONFIG_FUSION_SPI=m -CONFIG_FUSION_FC=m -CONFIG_FUSION_SAS=m -CONFIG_FUSION_MAX_SGE=128 -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_FUSION_LOGGING=y - -# -# IEEE 1394 (FireWire) support -# -CONFIG_FIREWIRE=m -CONFIG_FIREWIRE_OHCI=m -CONFIG_FIREWIRE_SBP2=m -CONFIG_FIREWIRE_NET=m -CONFIG_FIREWIRE_NOSY=m -CONFIG_MACINTOSH_DRIVERS=y -CONFIG_MAC_EMUMOUSEBTN=m -CONFIG_NETDEVICES=y -CONFIG_MII=m -CONFIG_NET_CORE=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_EQUALIZER=m -CONFIG_NET_FC=y -CONFIG_IFB=m -CONFIG_NET_TEAM=m -CONFIG_NET_TEAM_MODE_BROADCAST=m -CONFIG_NET_TEAM_MODE_ROUNDROBIN=m -CONFIG_NET_TEAM_MODE_RANDOM=m -CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m -CONFIG_NET_TEAM_MODE_LOADBALANCE=m -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m -CONFIG_IPVLAN=m -CONFIG_IPVTAP=m -CONFIG_VXLAN=m -CONFIG_GENEVE=m -CONFIG_GTP=m -CONFIG_MACSEC=m -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL=y -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_NTB_NETDEV is not set -CONFIG_RIONET=m -CONFIG_RIONET_TX_SIZE=128 -CONFIG_RIONET_RX_SIZE=128 -CONFIG_TUN=m -CONFIG_TAP=m -# CONFIG_TUN_VNET_CROSS_LE is not set -CONFIG_VETH=m -CONFIG_VIRTIO_NET=m -CONFIG_NLMON=m -CONFIG_NET_VRF=m -CONFIG_VSOCKMON=m -CONFIG_SUNGEM_PHY=m -CONFIG_ARCNET=m -CONFIG_ARCNET_1201=m -CONFIG_ARCNET_1051=m -CONFIG_ARCNET_RAW=m -CONFIG_ARCNET_CAP=m -CONFIG_ARCNET_COM90xx=m -CONFIG_ARCNET_COM90xxIO=m -CONFIG_ARCNET_RIM_I=m -CONFIG_ARCNET_COM20020=m -CONFIG_ARCNET_COM20020_PCI=m -CONFIG_ARCNET_COM20020_CS=m -CONFIG_ATM_DRIVERS=y -# CONFIG_ATM_DUMMY is not set -CONFIG_ATM_TCP=m -CONFIG_ATM_LANAI=m -CONFIG_ATM_ENI=m -# CONFIG_ATM_ENI_DEBUG is not set -# CONFIG_ATM_ENI_TUNE_BURST is not set -CONFIG_ATM_FIRESTREAM=m -CONFIG_ATM_ZATM=m -# CONFIG_ATM_ZATM_DEBUG is not set -CONFIG_ATM_NICSTAR=m -CONFIG_ATM_NICSTAR_USE_SUNI=y -CONFIG_ATM_NICSTAR_USE_IDT77105=y -CONFIG_ATM_IDT77252=m -# CONFIG_ATM_IDT77252_DEBUG is not set -# CONFIG_ATM_IDT77252_RCV_ALL is not set -CONFIG_ATM_IDT77252_USE_SUNI=y -CONFIG_ATM_AMBASSADOR=m -# CONFIG_ATM_AMBASSADOR_DEBUG is not set -CONFIG_ATM_HORIZON=m -# CONFIG_ATM_HORIZON_DEBUG is not set -CONFIG_ATM_IA=m -# CONFIG_ATM_IA_DEBUG is not set -CONFIG_ATM_FORE200E=m -CONFIG_ATM_FORE200E_USE_TASKLET=y -CONFIG_ATM_FORE200E_TX_RETRY=16 -CONFIG_ATM_FORE200E_DEBUG=0 -CONFIG_ATM_HE=m -CONFIG_ATM_HE_USE_SUNI=y -CONFIG_ATM_SOLOS=m - -# -# CAIF transport drivers -# -CONFIG_CAIF_TTY=m -CONFIG_CAIF_SPI_SLAVE=m -CONFIG_CAIF_SPI_SYNC=y -CONFIG_CAIF_HSI=m -CONFIG_CAIF_VIRTIO=m - -# -# Distributed Switch Architecture drivers -# -CONFIG_B53=m -CONFIG_B53_SPI_DRIVER=m -CONFIG_B53_MDIO_DRIVER=m -CONFIG_B53_MMAP_DRIVER=m -CONFIG_B53_SRAB_DRIVER=m -CONFIG_NET_DSA_LOOP=m -CONFIG_NET_DSA_MT7530=m -CONFIG_NET_DSA_MV88E6060=m -CONFIG_MICROCHIP_KSZ=m -CONFIG_MICROCHIP_KSZ_SPI_DRIVER=m -CONFIG_NET_DSA_MV88E6XXX=m -CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y -CONFIG_NET_DSA_QCA8K=m -CONFIG_NET_DSA_SMSC_LAN9303=m -CONFIG_NET_DSA_SMSC_LAN9303_I2C=m -CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m -CONFIG_ETHERNET=y -CONFIG_MDIO=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_3C589=m -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_NET_VENDOR_ADAPTEC=y -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_NET_VENDOR_AGERE=y -CONFIG_ET131X=m -CONFIG_NET_VENDOR_ALACRITECH=y -CONFIG_SLICOSS=m -CONFIG_NET_VENDOR_ALTEON=y -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_ALTERA_TSE=m -CONFIG_NET_VENDOR_AMAZON=y -CONFIG_ENA_ETHERNET=m -CONFIG_NET_VENDOR_AMD=y -CONFIG_AMD8111_ETH=m -CONFIG_PCNET32=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_AMD_XGBE=m -CONFIG_AMD_XGBE_DCB=y -CONFIG_AMD_XGBE_HAVE_ECC=y -CONFIG_NET_VENDOR_AQUANTIA=y -CONFIG_AQTION=m -CONFIG_NET_VENDOR_ARC=y -CONFIG_NET_VENDOR_ATHEROS=y -CONFIG_ATL2=m -CONFIG_ATL1=m -CONFIG_ATL1E=m -CONFIG_ATL1C=m -CONFIG_ALX=m -CONFIG_NET_VENDOR_AURORA=y -CONFIG_AURORA_NB8800=m -CONFIG_NET_CADENCE=y -CONFIG_MACB=m -CONFIG_MACB_USE_HWSTAMP=y -CONFIG_MACB_PCI=m -CONFIG_NET_VENDOR_BROADCOM=y -CONFIG_B44=m -CONFIG_B44_PCI_AUTOSELECT=y -CONFIG_B44_PCICORE_AUTOSELECT=y -CONFIG_B44_PCI=y -CONFIG_BNX2=m -CONFIG_CNIC=m -CONFIG_TIGON3=m -CONFIG_TIGON3_HWMON=y -CONFIG_BNX2X=m -CONFIG_BNX2X_SRIOV=y -CONFIG_BNXT=m -CONFIG_BNXT_SRIOV=y -CONFIG_BNXT_FLOWER_OFFLOAD=y -CONFIG_BNXT_DCB=y -CONFIG_NET_VENDOR_BROCADE=y -CONFIG_BNA=m -CONFIG_NET_VENDOR_CAVIUM=y -CONFIG_THUNDER_NIC_PF=m -CONFIG_THUNDER_NIC_VF=m -CONFIG_THUNDER_NIC_BGX=m -CONFIG_THUNDER_NIC_RGX=m -CONFIG_LIQUIDIO=m -CONFIG_LIQUIDIO_VF=m -CONFIG_NET_VENDOR_CHELSIO=y -CONFIG_CHELSIO_T1=m -CONFIG_CHELSIO_T1_1G=y -CONFIG_CHELSIO_T3=m -CONFIG_CHELSIO_T4=m -CONFIG_CHELSIO_T4_DCB=y -# CONFIG_CHELSIO_T4_FCOE is not set -CONFIG_CHELSIO_T4VF=m -CONFIG_CHELSIO_LIB=m -CONFIG_NET_VENDOR_CISCO=y -CONFIG_ENIC=m -CONFIG_CX_ECAT=m -CONFIG_DNET=m -CONFIG_NET_VENDOR_DEC=y -CONFIG_NET_TULIP=y -CONFIG_DE2104X=m -CONFIG_DE2104X_DSL=0 -CONFIG_TULIP=m -CONFIG_TULIP_MWI=y -CONFIG_TULIP_MMIO=y -CONFIG_TULIP_NAPI=y -CONFIG_TULIP_NAPI_HW_MITIGATION=y -CONFIG_DE4X5=m -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_ULI526X=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_NET_VENDOR_DLINK=y -CONFIG_DL2K=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_NET_VENDOR_EMULEX=y -CONFIG_BE2NET=m -CONFIG_BE2NET_HWMON=y -CONFIG_NET_VENDOR_EZCHIP=y -CONFIG_NET_VENDOR_EXAR=y -CONFIG_S2IO=m -CONFIG_VXGE=m -# CONFIG_VXGE_DEBUG_TRACE_ALL is not set -CONFIG_NET_VENDOR_FUJITSU=y -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_NET_VENDOR_HP=y -CONFIG_HP100=m -CONFIG_NET_VENDOR_HUAWEI=y -CONFIG_HINIC=m -CONFIG_NET_VENDOR_INTEL=y -CONFIG_E100=m -CONFIG_E1000=m -CONFIG_E1000E=m -CONFIG_E1000E_HWTS=y -CONFIG_IGB=m -CONFIG_IGB_HWMON=y -CONFIG_IGB_DCA=y -CONFIG_IGBVF=m -CONFIG_IXGB=m -CONFIG_IXGBE=m -CONFIG_IXGBE_HWMON=y -CONFIG_IXGBE_DCA=y -CONFIG_IXGBE_DCB=y -CONFIG_IXGBEVF=m -CONFIG_I40E=m -CONFIG_I40E_DCB=y -CONFIG_I40EVF=m -CONFIG_FM10K=m -CONFIG_NET_VENDOR_I825XX=y -CONFIG_JME=m -CONFIG_NET_VENDOR_MARVELL=y -CONFIG_MVMDIO=m -CONFIG_SKGE=m -# CONFIG_SKGE_DEBUG is not set -CONFIG_SKGE_GENESIS=y -CONFIG_SKY2=m -# CONFIG_SKY2_DEBUG is not set -CONFIG_NET_VENDOR_MELLANOX=y -CONFIG_MLX4_EN=m -CONFIG_MLX4_EN_DCB=y -CONFIG_MLX4_CORE=m -CONFIG_MLX4_DEBUG=y -CONFIG_MLX5_CORE=m -CONFIG_MLX5_ACCEL=y -CONFIG_MLX5_FPGA=y -# CONFIG_MLX5_CORE_EN is not set -CONFIG_MLXSW_CORE=m -CONFIG_MLXSW_CORE_HWMON=y -CONFIG_MLXSW_CORE_THERMAL=y -CONFIG_MLXSW_PCI=m -CONFIG_MLXSW_I2C=m -CONFIG_MLXSW_SWITCHIB=m -CONFIG_MLXSW_SWITCHX2=m -CONFIG_MLXSW_SPECTRUM=m -CONFIG_MLXSW_SPECTRUM_DCB=y -CONFIG_MLXSW_MINIMAL=m -CONFIG_MLXFW=m -CONFIG_NET_VENDOR_MICREL=y -CONFIG_KS8842=m -CONFIG_KS8851=m -CONFIG_KS8851_MLL=m -CONFIG_KSZ884X_PCI=m -CONFIG_NET_VENDOR_MICROCHIP=y -CONFIG_ENC28J60=m -# CONFIG_ENC28J60_WRITEVERIFY is not set -CONFIG_ENCX24J600=m -CONFIG_NET_VENDOR_MYRI=y -CONFIG_MYRI10GE=m -CONFIG_MYRI10GE_DCA=y -CONFIG_FEALNX=m -CONFIG_NET_VENDOR_NATSEMI=y -CONFIG_NATSEMI=m -CONFIG_NS83820=m -CONFIG_NET_VENDOR_NETRONOME=y -CONFIG_NFP=m -# CONFIG_NFP_APP_FLOWER is not set -# CONFIG_NFP_DEBUG is not set -CONFIG_NET_VENDOR_8390=y -CONFIG_PCMCIA_AXNET=m -CONFIG_NE2K_PCI=m -CONFIG_PCMCIA_PCNET=m -CONFIG_NET_VENDOR_NVIDIA=y -CONFIG_FORCEDETH=m -CONFIG_NET_VENDOR_OKI=y -CONFIG_ETHOC=m -CONFIG_NET_PACKET_ENGINE=y -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_NET_VENDOR_QLOGIC=y -CONFIG_QLA3XXX=m -CONFIG_QLCNIC=m -CONFIG_QLCNIC_SRIOV=y -CONFIG_QLCNIC_DCB=y -CONFIG_QLCNIC_HWMON=y -CONFIG_QLGE=m -CONFIG_NETXEN_NIC=m -CONFIG_QED=m -CONFIG_QED_LL2=y -CONFIG_QED_SRIOV=y -CONFIG_QEDE=m -CONFIG_QED_RDMA=y -CONFIG_QED_ISCSI=y -CONFIG_QED_FCOE=y -CONFIG_NET_VENDOR_QUALCOMM=y -CONFIG_QCOM_EMAC=m -CONFIG_RMNET=m -CONFIG_NET_VENDOR_REALTEK=y -CONFIG_ATP=m -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -CONFIG_8139TOO_TUNE_TWISTER=y -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_R8169=m -CONFIG_NET_VENDOR_RENESAS=y -CONFIG_NET_VENDOR_RDC=y -CONFIG_R6040=m -CONFIG_NET_VENDOR_ROCKER=y -CONFIG_ROCKER=m -CONFIG_NET_VENDOR_SAMSUNG=y -CONFIG_SXGBE_ETH=m -CONFIG_NET_VENDOR_SEEQ=y -CONFIG_NET_VENDOR_SILAN=y -CONFIG_SC92031=m -CONFIG_NET_VENDOR_SIS=y -CONFIG_SIS900=m -CONFIG_SIS190=m -CONFIG_NET_VENDOR_SOLARFLARE=y -CONFIG_SFC=m -CONFIG_SFC_MTD=y -CONFIG_SFC_MCDI_MON=y -CONFIG_SFC_SRIOV=y -CONFIG_SFC_MCDI_LOGGING=y -CONFIG_SFC_FALCON=m -CONFIG_SFC_FALCON_MTD=y -CONFIG_NET_VENDOR_SMSC=y -CONFIG_PCMCIA_SMC91C92=m -CONFIG_EPIC100=m -CONFIG_SMSC911X=m -# CONFIG_SMSC911X_ARCH_HOOKS is not set -CONFIG_SMSC9420=m -CONFIG_NET_VENDOR_STMICRO=y -CONFIG_STMMAC_ETH=m -CONFIG_STMMAC_PLATFORM=m -CONFIG_DWMAC_GENERIC=m -CONFIG_STMMAC_PCI=m -CONFIG_NET_VENDOR_SUN=y -CONFIG_HAPPYMEAL=m -CONFIG_SUNGEM=m -CONFIG_CASSINI=m -CONFIG_NIU=m -CONFIG_NET_VENDOR_TEHUTI=y -CONFIG_TEHUTI=m -CONFIG_NET_VENDOR_TI=y -CONFIG_TI_CPSW_ALE=m -CONFIG_TLAN=m -CONFIG_NET_VENDOR_VIA=y -CONFIG_VIA_RHINE=m -CONFIG_VIA_RHINE_MMIO=y -CONFIG_VIA_VELOCITY=m -CONFIG_NET_VENDOR_WIZNET=y -CONFIG_WIZNET_W5100=m -CONFIG_WIZNET_W5300=m -# CONFIG_WIZNET_BUS_DIRECT is not set -# CONFIG_WIZNET_BUS_INDIRECT is not set -CONFIG_WIZNET_BUS_ANY=y -CONFIG_WIZNET_W5100_SPI=m -CONFIG_NET_VENDOR_XIRCOM=y -CONFIG_PCMCIA_XIRC2PS=m -CONFIG_NET_VENDOR_SYNOPSYS=y -CONFIG_DWC_XLGMAC=m -CONFIG_DWC_XLGMAC_PCI=m -CONFIG_FDDI=m -CONFIG_DEFXX=m -# CONFIG_DEFXX_MMIO is not set -CONFIG_SKFP=m -CONFIG_HIPPI=y -CONFIG_ROADRUNNER=m -CONFIG_ROADRUNNER_LARGE_RINGS=y -CONFIG_NET_SB1000=m -CONFIG_MDIO_DEVICE=m -CONFIG_MDIO_BUS=m -CONFIG_MDIO_BITBANG=m -CONFIG_MDIO_CAVIUM=m -CONFIG_MDIO_GPIO=m -CONFIG_MDIO_THUNDER=m -CONFIG_PHYLIB=m -CONFIG_SWPHY=y -CONFIG_LED_TRIGGER_PHY=y - -# -# MII PHY device drivers -# -CONFIG_AMD_PHY=m -CONFIG_AQUANTIA_PHY=m -CONFIG_AT803X_PHY=m -CONFIG_BCM7XXX_PHY=m -CONFIG_BCM87XX_PHY=m -CONFIG_BCM_NET_PHYLIB=m -CONFIG_BROADCOM_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_CORTINA_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_DP83848_PHY=m -CONFIG_DP83867_PHY=m -CONFIG_FIXED_PHY=m -CONFIG_ICPLUS_PHY=m -CONFIG_INTEL_XWAY_PHY=m -CONFIG_LSI_ET1011C_PHY=m -CONFIG_LXT_PHY=m -CONFIG_MARVELL_PHY=m -CONFIG_MARVELL_10G_PHY=m -CONFIG_MICREL_PHY=m -CONFIG_MICROCHIP_PHY=m -CONFIG_MICROSEMI_PHY=m -CONFIG_NATIONAL_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_REALTEK_PHY=m -CONFIG_ROCKCHIP_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_STE10XP=m -CONFIG_TERANETICS_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_XILINX_GMII2RGMII=m -CONFIG_MICREL_KS8995MA=m -CONFIG_PLIP=m -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOATM=m -CONFIG_PPPOE=m -CONFIG_PPTP=m -CONFIG_PPPOL2TP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_SLIP=m -CONFIG_SLHC=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y - -# -# Host-side USB support is needed for USB Network Adapter support -# -CONFIG_USB_NET_DRIVERS=m -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_RTL8152=m -CONFIG_USB_LAN78XX=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_AX88179_178A=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_CDC_EEM=m -CONFIG_USB_NET_CDC_NCM=m -CONFIG_USB_NET_HUAWEI_CDC_NCM=m -CONFIG_USB_NET_CDC_MBIM=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SR9700=m -CONFIG_USB_NET_SR9800=m -CONFIG_USB_NET_SMSC75XX=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET_ENABLE=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_NET_CX82310_ETH=m -CONFIG_USB_NET_KALMIA=m -CONFIG_USB_NET_QMI_WWAN=m -CONFIG_USB_HSO=m -CONFIG_USB_NET_INT51X1=m -CONFIG_USB_CDC_PHONET=m -CONFIG_USB_IPHETH=m -CONFIG_USB_SIERRA_NET=m -CONFIG_USB_VL600=m -CONFIG_USB_NET_CH9200=m -CONFIG_WLAN=y -CONFIG_WLAN_VENDOR_ADMTEK=y -CONFIG_ADM8211=m -CONFIG_ATH_COMMON=m -CONFIG_WLAN_VENDOR_ATH=y -# CONFIG_ATH_DEBUG is not set -CONFIG_ATH5K=m -# CONFIG_ATH5K_DEBUG is not set -# CONFIG_ATH5K_TRACER is not set -CONFIG_ATH5K_PCI=y -CONFIG_ATH9K_HW=m -CONFIG_ATH9K_COMMON=m -CONFIG_ATH9K_BTCOEX_SUPPORT=y -CONFIG_ATH9K=m -CONFIG_ATH9K_PCI=y -CONFIG_ATH9K_AHB=y -# CONFIG_ATH9K_DEBUGFS is not set -CONFIG_ATH9K_DYNACK=y -CONFIG_ATH9K_WOW=y -CONFIG_ATH9K_RFKILL=y -CONFIG_ATH9K_CHANNEL_CONTEXT=y -CONFIG_ATH9K_PCOEM=y -CONFIG_ATH9K_HTC=m -# CONFIG_ATH9K_HTC_DEBUGFS is not set -CONFIG_ATH9K_HWRNG=y -CONFIG_CARL9170=m -CONFIG_CARL9170_LEDS=y -CONFIG_CARL9170_WPC=y -# CONFIG_CARL9170_HWRNG is not set -CONFIG_ATH6KL=m -CONFIG_ATH6KL_SDIO=m -CONFIG_ATH6KL_USB=m -# CONFIG_ATH6KL_DEBUG is not set -# CONFIG_ATH6KL_TRACING is not set -CONFIG_AR5523=m -CONFIG_WIL6210=m -CONFIG_WIL6210_ISR_COR=y -CONFIG_WIL6210_TRACING=y -CONFIG_WIL6210_DEBUGFS=y -CONFIG_ATH10K=m -CONFIG_ATH10K_PCI=m -CONFIG_ATH10K_SDIO=m -CONFIG_ATH10K_USB=m -# CONFIG_ATH10K_DEBUG is not set -# CONFIG_ATH10K_DEBUGFS is not set -# CONFIG_ATH10K_TRACING is not set -CONFIG_WCN36XX=m -# CONFIG_WCN36XX_DEBUGFS is not set -CONFIG_WLAN_VENDOR_ATMEL=y -CONFIG_ATMEL=m -CONFIG_PCI_ATMEL=m -CONFIG_PCMCIA_ATMEL=m -CONFIG_AT76C50X_USB=m -CONFIG_WLAN_VENDOR_BROADCOM=y -CONFIG_B43=m -CONFIG_B43_BCMA=y -CONFIG_B43_SSB=y -CONFIG_B43_BUSES_BCMA_AND_SSB=y -# CONFIG_B43_BUSES_BCMA is not set -# CONFIG_B43_BUSES_SSB is not set -CONFIG_B43_PCI_AUTOSELECT=y -CONFIG_B43_PCICORE_AUTOSELECT=y -CONFIG_B43_SDIO=y -CONFIG_B43_BCMA_PIO=y -CONFIG_B43_PIO=y -CONFIG_B43_PHY_G=y -CONFIG_B43_PHY_N=y -CONFIG_B43_PHY_LP=y -CONFIG_B43_PHY_HT=y -CONFIG_B43_LEDS=y -CONFIG_B43_HWRNG=y -# CONFIG_B43_DEBUG is not set -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_PCI_AUTOSELECT=y -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y -CONFIG_B43LEGACY_LEDS=y -CONFIG_B43LEGACY_HWRNG=y -# CONFIG_B43LEGACY_DEBUG is not set -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y -# CONFIG_B43LEGACY_DMA_MODE is not set -# CONFIG_B43LEGACY_PIO_MODE is not set -CONFIG_BRCMUTIL=m -CONFIG_BRCMSMAC=m -CONFIG_BRCMFMAC=m -CONFIG_BRCMFMAC_PROTO_BCDC=y -CONFIG_BRCMFMAC_PROTO_MSGBUF=y -CONFIG_BRCMFMAC_SDIO=y -CONFIG_BRCMFMAC_USB=y -CONFIG_BRCMFMAC_PCIE=y -CONFIG_BRCM_TRACING=y -# CONFIG_BRCMDBG is not set -CONFIG_WLAN_VENDOR_CISCO=y -CONFIG_AIRO=m -CONFIG_AIRO_CS=m -CONFIG_WLAN_VENDOR_INTEL=y -CONFIG_IPW2100=m -CONFIG_IPW2100_MONITOR=y -# CONFIG_IPW2100_DEBUG is not set -CONFIG_IPW2200=m -CONFIG_IPW2200_MONITOR=y -CONFIG_IPW2200_RADIOTAP=y -CONFIG_IPW2200_PROMISCUOUS=y -CONFIG_IPW2200_QOS=y -# CONFIG_IPW2200_DEBUG is not set -CONFIG_LIBIPW=m -# CONFIG_LIBIPW_DEBUG is not set -CONFIG_IWLEGACY=m -CONFIG_IWL4965=m -CONFIG_IWL3945=m - -# -# iwl3945 / iwl4965 Debugging Options -# -# CONFIG_IWLEGACY_DEBUG is not set -CONFIG_IWLWIFI=m -CONFIG_IWLWIFI_LEDS=y -CONFIG_IWLDVM=m -CONFIG_IWLMVM=m -CONFIG_IWLWIFI_OPMODE_MODULAR=y -CONFIG_IWLWIFI_BCAST_FILTERING=y - -# -# Debugging Options -# -# CONFIG_IWLWIFI_DEBUG is not set -CONFIG_IWLWIFI_DEVICE_TRACING=y -CONFIG_WLAN_VENDOR_INTERSIL=y -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -CONFIG_HOSTAP_CS=m -CONFIG_HERMES=m -CONFIG_HERMES_PRISM=y -CONFIG_HERMES_CACHE_FW_ON_INIT=y -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_NORTEL_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -CONFIG_ORINOCO_USB=m -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -CONFIG_P54_PCI=m -CONFIG_P54_SPI=m -CONFIG_P54_SPI_DEFAULT_EEPROM=y -CONFIG_P54_LEDS=y -CONFIG_PRISM54=m -CONFIG_WLAN_VENDOR_MARVELL=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_CS=m -CONFIG_LIBERTAS_SDIO=m -CONFIG_LIBERTAS_SPI=m -# CONFIG_LIBERTAS_DEBUG is not set -CONFIG_LIBERTAS_MESH=y -CONFIG_LIBERTAS_THINFIRM=m -# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set -CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_SDIO=m -CONFIG_MWIFIEX_PCIE=m -CONFIG_MWIFIEX_USB=m -CONFIG_MWL8K=m -CONFIG_WLAN_VENDOR_MEDIATEK=y -CONFIG_MT7601U=m -CONFIG_WLAN_VENDOR_RALINK=y -CONFIG_RT2X00=m -CONFIG_RT2400PCI=m -CONFIG_RT2500PCI=m -CONFIG_RT61PCI=m -CONFIG_RT2800PCI=m -CONFIG_RT2800PCI_RT33XX=y -CONFIG_RT2800PCI_RT35XX=y -CONFIG_RT2800PCI_RT53XX=y -CONFIG_RT2800PCI_RT3290=y -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT33XX=y -CONFIG_RT2800USB_RT35XX=y -CONFIG_RT2800USB_RT3573=y -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_RT55XX=y -CONFIG_RT2800USB_UNKNOWN=y -CONFIG_RT2800_LIB=m -CONFIG_RT2800_LIB_MMIO=m -CONFIG_RT2X00_LIB_MMIO=m -CONFIG_RT2X00_LIB_PCI=m -CONFIG_RT2X00_LIB_USB=m -CONFIG_RT2X00_LIB=m -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_LEDS=y -# CONFIG_RT2X00_DEBUG is not set -CONFIG_WLAN_VENDOR_REALTEK=y -CONFIG_RTL8180=m -CONFIG_RTL8187=m -CONFIG_RTL8187_LEDS=y -CONFIG_RTL_CARDS=m -CONFIG_RTL8192CE=m -CONFIG_RTL8192SE=m -CONFIG_RTL8192DE=m -CONFIG_RTL8723AE=m -CONFIG_RTL8723BE=m -CONFIG_RTL8188EE=m -CONFIG_RTL8192EE=m -CONFIG_RTL8821AE=m -CONFIG_RTL8192CU=m -CONFIG_RTLWIFI=m -CONFIG_RTLWIFI_PCI=m -CONFIG_RTLWIFI_USB=m -# CONFIG_RTLWIFI_DEBUG is not set -CONFIG_RTL8192C_COMMON=m -CONFIG_RTL8723_COMMON=m -CONFIG_RTLBTCOEXIST=m -CONFIG_RTL8XXXU=m -CONFIG_RTL8XXXU_UNTESTED=y -CONFIG_WLAN_VENDOR_RSI=y -CONFIG_RSI_91X=m -# CONFIG_RSI_DEBUGFS is not set -CONFIG_RSI_SDIO=m -CONFIG_RSI_USB=m -CONFIG_WLAN_VENDOR_ST=y -CONFIG_CW1200=m -CONFIG_CW1200_WLAN_SDIO=m -CONFIG_CW1200_WLAN_SPI=m -CONFIG_WLAN_VENDOR_TI=y -CONFIG_WL1251=m -CONFIG_WL1251_SPI=m -CONFIG_WL1251_SDIO=m -CONFIG_WL12XX=m -CONFIG_WL18XX=m -CONFIG_WLCORE=m -CONFIG_WLCORE_SDIO=m -CONFIG_WILINK_PLATFORM_DATA=y -CONFIG_WLAN_VENDOR_ZYDAS=y -CONFIG_USB_ZD1201=m -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set -CONFIG_WLAN_VENDOR_QUANTENNA=y -CONFIG_QTNFMAC=m -CONFIG_QTNFMAC_PEARL_PCIE=m -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_WL3501=m -# CONFIG_MAC80211_HWSIM is not set -CONFIG_USB_NET_RNDIS_WLAN=m - -# -# WiMAX Wireless Broadband devices -# -CONFIG_WIMAX_I2400M=m -CONFIG_WIMAX_I2400M_USB=m -CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 -CONFIG_WAN=y -CONFIG_LANMEDIA=m -CONFIG_HDLC=m -CONFIG_HDLC_RAW=m -CONFIG_HDLC_RAW_ETH=m -CONFIG_HDLC_CISCO=m -CONFIG_HDLC_FR=m -CONFIG_HDLC_PPP=m -CONFIG_HDLC_X25=m -CONFIG_PCI200SYN=m -CONFIG_WANXL=m -CONFIG_PC300TOO=m -CONFIG_FARSYNC=m -CONFIG_DSCC4=m -CONFIG_DSCC4_PCISYNC=y -CONFIG_DSCC4_PCI_RST=y -CONFIG_DLCI=m -CONFIG_DLCI_MAX=8 -CONFIG_LAPBETHER=m -CONFIG_X25_ASY=m -CONFIG_SBNI=m -CONFIG_SBNI_MULTILINE=y -CONFIG_IEEE802154_DRIVERS=m -CONFIG_IEEE802154_FAKELB=m -CONFIG_IEEE802154_AT86RF230=m -# CONFIG_IEEE802154_AT86RF230_DEBUGFS is not set -CONFIG_IEEE802154_MRF24J40=m -CONFIG_IEEE802154_CC2520=m -CONFIG_IEEE802154_ATUSB=m -CONFIG_IEEE802154_ADF7242=m -CONFIG_IEEE802154_CA8210=m -# CONFIG_IEEE802154_CA8210_DEBUGFS is not set -CONFIG_VMXNET3=m -CONFIG_FUJITSU_ES=m -CONFIG_HYPERV_NET=m -CONFIG_ISDN=y -CONFIG_ISDN_I4L=m -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_IPPP_FILTER=y -CONFIG_ISDN_PPP_BSDCOMP=m -CONFIG_ISDN_AUDIO=y -CONFIG_ISDN_TTY_FAX=y -CONFIG_ISDN_X25=y - -# -# ISDN feature submodules -# -CONFIG_ISDN_DIVERSION=m - -# -# ISDN4Linux hardware drivers -# - -# -# Passive cards -# -CONFIG_ISDN_DRV_HISAX=m - -# -# D-channel protocol features -# -CONFIG_HISAX_EURO=y -CONFIG_DE_AOC=y -# CONFIG_HISAX_NO_SENDCOMPLETE is not set -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -CONFIG_HISAX_1TR6=y -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 - -# -# HiSax supported cards -# -CONFIG_HISAX_16_3=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -# CONFIG_HISAX_DEBUG is not set - -# -# HiSax PCMCIA card service modules -# -CONFIG_HISAX_SEDLBAUER_CS=m -CONFIG_HISAX_ELSA_CS=m -CONFIG_HISAX_AVM_A1_CS=m -CONFIG_HISAX_TELES_CS=m - -# -# HiSax sub driver modules -# -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_HFCUSB=m -CONFIG_HISAX_HFC4S8S=m -CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_ISDN_CAPI=m -CONFIG_CAPI_TRACE=y -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_MIDDLEWARE=y -CONFIG_ISDN_CAPI_CAPIDRV=m -# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set - -# -# CAPI hardware drivers -# -CONFIG_CAPI_AVM=y -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -CONFIG_ISDN_DRV_AVMB1_AVM_CS=m -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_CAPI_EICON=y -CONFIG_ISDN_DIVAS=m -CONFIG_ISDN_DIVAS_BRIPCI=y -CONFIG_ISDN_DIVAS_PRIPCI=y -CONFIG_ISDN_DIVAS_DIVACAPI=m -CONFIG_ISDN_DIVAS_USERIDI=m -CONFIG_ISDN_DIVAS_MAINT=m -CONFIG_ISDN_DRV_GIGASET=m -CONFIG_GIGASET_CAPI=y -# CONFIG_GIGASET_I4L is not set -# CONFIG_GIGASET_DUMMYLL is not set -CONFIG_GIGASET_BASE=m -CONFIG_GIGASET_M105=m -CONFIG_GIGASET_M101=m -# CONFIG_GIGASET_DEBUG is not set -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y -CONFIG_MISDN=m -CONFIG_MISDN_DSP=m -CONFIG_MISDN_L1OIP=m - -# -# mISDN hardware drivers -# -CONFIG_MISDN_HFCPCI=m -CONFIG_MISDN_HFCMULTI=m -CONFIG_MISDN_HFCUSB=m -CONFIG_MISDN_AVMFRITZ=m -CONFIG_MISDN_SPEEDFAX=m -CONFIG_MISDN_INFINEON=m -CONFIG_MISDN_W6692=m -CONFIG_MISDN_NETJET=m -CONFIG_MISDN_IPAC=m -CONFIG_MISDN_ISAR=m -CONFIG_ISDN_HDLC=m -CONFIG_NVM=y -# CONFIG_NVM_DEBUG is not set -CONFIG_NVM_RRPC=m -CONFIG_NVM_PBLK=m - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_LEDS=y -CONFIG_INPUT_FF_MEMLESS=m -CONFIG_INPUT_POLLDEV=m -CONFIG_INPUT_SPARSEKMAP=m -CONFIG_INPUT_MATRIXKMAP=m - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ADC=m -CONFIG_KEYBOARD_ADP5588=m -CONFIG_KEYBOARD_ADP5589=m -CONFIG_KEYBOARD_ATKBD=y -CONFIG_KEYBOARD_QT1070=m -CONFIG_KEYBOARD_QT2160=m -CONFIG_KEYBOARD_DLINK_DIR685=m -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_GPIO_POLLED=m -CONFIG_KEYBOARD_TCA6416=m -CONFIG_KEYBOARD_TCA8418=m -CONFIG_KEYBOARD_MATRIX=m -CONFIG_KEYBOARD_LM8323=m -CONFIG_KEYBOARD_LM8333=m -CONFIG_KEYBOARD_MAX7359=m -CONFIG_KEYBOARD_MCS=m -CONFIG_KEYBOARD_MPR121=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_OPENCORES=m -CONFIG_KEYBOARD_SAMSUNG=m -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_TM2_TOUCHKEY=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_KEYBOARD_CROS_EC=m -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_BYD=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y -CONFIG_MOUSE_PS2_CYPRESS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -CONFIG_MOUSE_PS2_ELANTECH=y -CONFIG_MOUSE_PS2_SENTELIC=y -CONFIG_MOUSE_PS2_TOUCHKIT=y -CONFIG_MOUSE_PS2_FOCALTECH=y -# CONFIG_MOUSE_PS2_VMMOUSE is not set -CONFIG_MOUSE_PS2_SMBUS=y -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_BCM5974=m -CONFIG_MOUSE_CYAPA=m -CONFIG_MOUSE_ELAN_I2C=m -CONFIG_MOUSE_ELAN_I2C_I2C=y -CONFIG_MOUSE_ELAN_I2C_SMBUS=y -CONFIG_MOUSE_VSXXXAA=m -CONFIG_MOUSE_GPIO=m -CONFIG_MOUSE_SYNAPTICS_I2C=m -CONFIG_MOUSE_SYNAPTICS_USB=m -CONFIG_INPUT_JOYSTICK=y -CONFIG_JOYSTICK_ANALOG=m -CONFIG_JOYSTICK_A3D=m -CONFIG_JOYSTICK_ADI=m -CONFIG_JOYSTICK_COBRA=m -CONFIG_JOYSTICK_GF2K=m -CONFIG_JOYSTICK_GRIP=m -CONFIG_JOYSTICK_GRIP_MP=m -CONFIG_JOYSTICK_GUILLEMOT=m -CONFIG_JOYSTICK_INTERACT=m -CONFIG_JOYSTICK_SIDEWINDER=m -CONFIG_JOYSTICK_TMDC=m -CONFIG_JOYSTICK_IFORCE=m -CONFIG_JOYSTICK_IFORCE_USB=y -CONFIG_JOYSTICK_IFORCE_232=y -CONFIG_JOYSTICK_WARRIOR=m -CONFIG_JOYSTICK_MAGELLAN=m -CONFIG_JOYSTICK_SPACEORB=m -CONFIG_JOYSTICK_SPACEBALL=m -CONFIG_JOYSTICK_STINGER=m -CONFIG_JOYSTICK_TWIDJOY=m -CONFIG_JOYSTICK_ZHENHUA=m -CONFIG_JOYSTICK_DB9=m -CONFIG_JOYSTICK_GAMECON=m -CONFIG_JOYSTICK_TURBOGRAFX=m -CONFIG_JOYSTICK_AS5011=m -# CONFIG_JOYSTICK_JOYDUMP is not set -CONFIG_JOYSTICK_XPAD=m -CONFIG_JOYSTICK_XPAD_FF=y -CONFIG_JOYSTICK_XPAD_LEDS=y -CONFIG_JOYSTICK_WALKERA0701=m -CONFIG_JOYSTICK_PSXPAD_SPI=m -CONFIG_JOYSTICK_PSXPAD_SPI_FF=y -CONFIG_INPUT_TABLET=y -CONFIG_TABLET_USB_ACECAD=m -CONFIG_TABLET_USB_AIPTEK=m -CONFIG_TABLET_USB_GTCO=m -CONFIG_TABLET_USB_HANWANG=m -CONFIG_TABLET_USB_KBTAB=m -CONFIG_TABLET_USB_PEGASUS=m -CONFIG_TABLET_SERIAL_WACOM4=m -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_PROPERTIES=y -CONFIG_TOUCHSCREEN_ADS7846=m -CONFIG_TOUCHSCREEN_AD7877=m -CONFIG_TOUCHSCREEN_AD7879=m -CONFIG_TOUCHSCREEN_AD7879_I2C=m -CONFIG_TOUCHSCREEN_AD7879_SPI=m -CONFIG_TOUCHSCREEN_ATMEL_MXT=m -# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set -CONFIG_TOUCHSCREEN_AUO_PIXCIR=m -CONFIG_TOUCHSCREEN_BU21013=m -CONFIG_TOUCHSCREEN_CY8CTMG110=m -CONFIG_TOUCHSCREEN_CYTTSP_CORE=m -CONFIG_TOUCHSCREEN_CYTTSP_I2C=m -CONFIG_TOUCHSCREEN_CYTTSP_SPI=m -CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m -CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m -CONFIG_TOUCHSCREEN_CYTTSP4_SPI=m -CONFIG_TOUCHSCREEN_DA9052=m -CONFIG_TOUCHSCREEN_DYNAPRO=m -CONFIG_TOUCHSCREEN_HAMPSHIRE=m -CONFIG_TOUCHSCREEN_EETI=m -CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m -CONFIG_TOUCHSCREEN_FUJITSU=m -CONFIG_TOUCHSCREEN_GOODIX=m -CONFIG_TOUCHSCREEN_ILI210X=m -CONFIG_TOUCHSCREEN_GUNZE=m -CONFIG_TOUCHSCREEN_EKTF2127=m -CONFIG_TOUCHSCREEN_ELAN=m -CONFIG_TOUCHSCREEN_ELO=m -CONFIG_TOUCHSCREEN_WACOM_W8001=m -CONFIG_TOUCHSCREEN_WACOM_I2C=m -CONFIG_TOUCHSCREEN_MAX11801=m -CONFIG_TOUCHSCREEN_MCS5000=m -CONFIG_TOUCHSCREEN_MMS114=m -CONFIG_TOUCHSCREEN_MELFAS_MIP4=m -CONFIG_TOUCHSCREEN_MTOUCH=m -CONFIG_TOUCHSCREEN_INEXIO=m -CONFIG_TOUCHSCREEN_MK712=m -CONFIG_TOUCHSCREEN_PENMOUNT=m -CONFIG_TOUCHSCREEN_EDT_FT5X06=m -CONFIG_TOUCHSCREEN_TOUCHRIGHT=m -CONFIG_TOUCHSCREEN_TOUCHWIN=m -CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m -CONFIG_TOUCHSCREEN_UCB1400=m -CONFIG_TOUCHSCREEN_PIXCIR=m -CONFIG_TOUCHSCREEN_WDT87XX_I2C=m -CONFIG_TOUCHSCREEN_WM831X=m -CONFIG_TOUCHSCREEN_WM97XX=m -CONFIG_TOUCHSCREEN_WM9705=y -CONFIG_TOUCHSCREEN_WM9712=y -CONFIG_TOUCHSCREEN_WM9713=y -CONFIG_TOUCHSCREEN_USB_COMPOSITE=m -CONFIG_TOUCHSCREEN_MC13783=m -CONFIG_TOUCHSCREEN_USB_EGALAX=y -CONFIG_TOUCHSCREEN_USB_PANJIT=y -CONFIG_TOUCHSCREEN_USB_3M=y -CONFIG_TOUCHSCREEN_USB_ITM=y -CONFIG_TOUCHSCREEN_USB_ETURBO=y -CONFIG_TOUCHSCREEN_USB_GUNZE=y -CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y -CONFIG_TOUCHSCREEN_USB_IRTOUCH=y -CONFIG_TOUCHSCREEN_USB_IDEALTEK=y -CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y -CONFIG_TOUCHSCREEN_USB_GOTOP=y -CONFIG_TOUCHSCREEN_USB_JASTEC=y -CONFIG_TOUCHSCREEN_USB_ELO=y -CONFIG_TOUCHSCREEN_USB_E2I=y -CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y -CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y -CONFIG_TOUCHSCREEN_USB_NEXIO=y -CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y -CONFIG_TOUCHSCREEN_TOUCHIT213=m -CONFIG_TOUCHSCREEN_TSC_SERIO=m -CONFIG_TOUCHSCREEN_TSC200X_CORE=m -CONFIG_TOUCHSCREEN_TSC2004=m -CONFIG_TOUCHSCREEN_TSC2005=m -CONFIG_TOUCHSCREEN_TSC2007=m -CONFIG_TOUCHSCREEN_TSC2007_IIO=y -CONFIG_TOUCHSCREEN_PCAP=m -CONFIG_TOUCHSCREEN_RM_TS=m -CONFIG_TOUCHSCREEN_SILEAD=m -CONFIG_TOUCHSCREEN_SIS_I2C=m -CONFIG_TOUCHSCREEN_ST1232=m -CONFIG_TOUCHSCREEN_STMFTS=m -CONFIG_TOUCHSCREEN_SUR40=m -CONFIG_TOUCHSCREEN_SURFACE3_SPI=m -CONFIG_TOUCHSCREEN_SX8654=m -CONFIG_TOUCHSCREEN_TPS6507X=m -CONFIG_TOUCHSCREEN_ZET6223=m -CONFIG_TOUCHSCREEN_ZFORCE=m -CONFIG_TOUCHSCREEN_ROHM_BU21023=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_88PM80X_ONKEY=m -CONFIG_INPUT_AD714X=m -CONFIG_INPUT_AD714X_I2C=m -CONFIG_INPUT_AD714X_SPI=m -CONFIG_INPUT_ARIZONA_HAPTICS=m -CONFIG_INPUT_BMA150=m -CONFIG_INPUT_E3X0_BUTTON=m -CONFIG_INPUT_PCSPKR=m -CONFIG_INPUT_MAX77693_HAPTIC=m -CONFIG_INPUT_MC13783_PWRBUTTON=m -CONFIG_INPUT_MMA8450=m -CONFIG_INPUT_APANEL=m -CONFIG_INPUT_GP2A=m -CONFIG_INPUT_GPIO_BEEPER=m -CONFIG_INPUT_GPIO_TILT_POLLED=m -CONFIG_INPUT_GPIO_DECODER=m -CONFIG_INPUT_ATLAS_BTNS=m -CONFIG_INPUT_ATI_REMOTE2=m -CONFIG_INPUT_KEYSPAN_REMOTE=m -CONFIG_INPUT_KXTJ9=m -CONFIG_INPUT_KXTJ9_POLLED_MODE=y -CONFIG_INPUT_POWERMATE=m -CONFIG_INPUT_YEALINK=m -CONFIG_INPUT_CM109=m -CONFIG_INPUT_REGULATOR_HAPTIC=m -CONFIG_INPUT_RETU_PWRBUTTON=m -CONFIG_INPUT_TPS65218_PWRBUTTON=m -CONFIG_INPUT_AXP20X_PEK=m -CONFIG_INPUT_UINPUT=m -CONFIG_INPUT_PCF50633_PMU=m -CONFIG_INPUT_PCF8574=m -CONFIG_INPUT_PWM_BEEPER=m -CONFIG_INPUT_PWM_VIBRA=m -CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -CONFIG_INPUT_DA9052_ONKEY=m -CONFIG_INPUT_DA9063_ONKEY=m -CONFIG_INPUT_WM831X_ON=m -CONFIG_INPUT_PCAP=m -CONFIG_INPUT_ADXL34X=m -CONFIG_INPUT_ADXL34X_I2C=m -CONFIG_INPUT_ADXL34X_SPI=m -CONFIG_INPUT_IMS_PCU=m -CONFIG_INPUT_CMA3000=m -CONFIG_INPUT_CMA3000_I2C=m -CONFIG_INPUT_IDEAPAD_SLIDEBAR=m -CONFIG_INPUT_SOC_BUTTON_ARRAY=m -CONFIG_INPUT_DRV260X_HAPTICS=m -CONFIG_INPUT_DRV2665_HAPTICS=m -CONFIG_INPUT_DRV2667_HAPTICS=m -CONFIG_RMI4_CORE=m -CONFIG_RMI4_I2C=m -CONFIG_RMI4_SPI=m -CONFIG_RMI4_SMB=m -CONFIG_RMI4_F03=y -CONFIG_RMI4_F03_SERIO=m -CONFIG_RMI4_2D_SENSOR=y -CONFIG_RMI4_F11=y -CONFIG_RMI4_F12=y -CONFIG_RMI4_F30=y -CONFIG_RMI4_F34=y -CONFIG_RMI4_F54=y -CONFIG_RMI4_F55=y - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_CT82C710=m -CONFIG_SERIO_PARKBD=m -CONFIG_SERIO_PCIPS2=m -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIO_RAW=m -CONFIG_SERIO_ALTERA_PS2=m -CONFIG_SERIO_PS2MULT=m -CONFIG_SERIO_ARC_PS2=m -CONFIG_HYPERV_KEYBOARD=m -CONFIG_SERIO_GPIO_PS2=m -CONFIG_USERIO=m -CONFIG_GAMEPORT=m -CONFIG_GAMEPORT_NS558=m -CONFIG_GAMEPORT_L4=m -CONFIG_GAMEPORT_EMU10K1=m -CONFIG_GAMEPORT_FM801=m - -# -# Character devices -# -CONFIG_TTY=y -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -CONFIG_CYZ_INTR=y -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_SYNCLINK_GT=m -CONFIG_NOZOMI=m -CONFIG_ISI=m -CONFIG_N_HDLC=m -CONFIG_N_GSM=m -CONFIG_TRACE_ROUTER=m -CONFIG_TRACE_SINK=m -CONFIG_DEVMEM=y -# CONFIG_DEVKMEM is not set - -# -# Serial drivers -# -CONFIG_SERIAL_EARLYCON=y -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_FINTEK=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_DMA=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_EXAR=y -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_MEN_MCB=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_SERIAL_8250_FSL is not set -CONFIG_SERIAL_8250_DW=m -CONFIG_SERIAL_8250_RT288X=y -CONFIG_SERIAL_8250_LPSS=y -CONFIG_SERIAL_8250_MID=y -CONFIG_SERIAL_8250_MOXA=m - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_MAX3100=m -CONFIG_SERIAL_MAX310X=y -CONFIG_SERIAL_UARTLITE=m -CONFIG_SERIAL_UARTLITE_NR_UARTS=1 -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_JSM=m -CONFIG_SERIAL_SCCNXP=m -CONFIG_SERIAL_SC16IS7XX_CORE=m -CONFIG_SERIAL_SC16IS7XX=m -CONFIG_SERIAL_SC16IS7XX_I2C=y -CONFIG_SERIAL_SC16IS7XX_SPI=y -CONFIG_SERIAL_ALTERA_JTAGUART=m -CONFIG_SERIAL_ALTERA_UART=m -CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4 -CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200 -CONFIG_SERIAL_IFX6X60=m -CONFIG_SERIAL_ARC=m -CONFIG_SERIAL_ARC_NR_PORTS=1 -CONFIG_SERIAL_RP2=m -CONFIG_SERIAL_RP2_NR_UARTS=32 -CONFIG_SERIAL_FSL_LPUART=m -CONFIG_SERIAL_MEN_Z135=m -CONFIG_SERIAL_DEV_BUS=m -CONFIG_PRINTER=m -CONFIG_LP_CONSOLE=y -CONFIG_PPDEV=m -CONFIG_HVC_DRIVER=y -CONFIG_VIRTIO_CONSOLE=m -CONFIG_IPMI_HANDLER=m -CONFIG_IPMI_DMI_DECODE=y -CONFIG_IPMI_PANIC_EVENT=y -CONFIG_IPMI_PANIC_STRING=y -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_SSIF=m -CONFIG_IPMI_WATCHDOG=m -CONFIG_IPMI_POWEROFF=m -CONFIG_HW_RANDOM=m -CONFIG_HW_RANDOM_TIMERIOMEM=m -CONFIG_HW_RANDOM_INTEL=m -CONFIG_HW_RANDOM_AMD=m -CONFIG_HW_RANDOM_VIA=m -CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_HW_RANDOM_TPM=m -CONFIG_NVRAM=m -CONFIG_R3964=m -CONFIG_APPLICOM=m - -# -# PCMCIA character devices -# -CONFIG_SYNCLINK_CS=m -CONFIG_CARDMAN_4000=m -CONFIG_CARDMAN_4040=m -CONFIG_SCR24X=m -CONFIG_IPWIRELESS=m -CONFIG_MWAVE=m -CONFIG_RAW_DRIVER=m -CONFIG_MAX_RAW_DEVS=256 -CONFIG_HPET=y -CONFIG_HPET_MMAP=y -CONFIG_HPET_MMAP_DEFAULT=y -CONFIG_HANGCHECK_TIMER=m -CONFIG_TCG_TPM=m -CONFIG_TCG_TIS_CORE=m -CONFIG_TCG_TIS=m -CONFIG_TCG_TIS_SPI=m -CONFIG_TCG_TIS_I2C_ATMEL=m -CONFIG_TCG_TIS_I2C_INFINEON=m -CONFIG_TCG_TIS_I2C_NUVOTON=m -CONFIG_TCG_NSC=m -CONFIG_TCG_ATMEL=m -CONFIG_TCG_INFINEON=m -CONFIG_TCG_CRB=m -CONFIG_TCG_VTPM_PROXY=m -CONFIG_TCG_TIS_ST33ZP24=m -CONFIG_TCG_TIS_ST33ZP24_I2C=m -CONFIG_TCG_TIS_ST33ZP24_SPI=m -CONFIG_TELCLOCK=m -CONFIG_DEVPORT=y -CONFIG_XILLYBUS=m -CONFIG_XILLYBUS_PCIE=m - -# -# I2C support -# -CONFIG_I2C=m -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_MUX=m - -# -# Multiplexer I2C Chip support -# -CONFIG_I2C_MUX_GPIO=m -CONFIG_I2C_MUX_LTC4306=m -CONFIG_I2C_MUX_PCA9541=m -CONFIG_I2C_MUX_PCA954x=m -CONFIG_I2C_MUX_REG=m -CONFIG_I2C_MUX_MLXCPLD=m -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_SMBUS=m -CONFIG_I2C_ALGOBIT=m -CONFIG_I2C_ALGOPCA=m - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -CONFIG_I2C_ALI1535=m -CONFIG_I2C_ALI1563=m -CONFIG_I2C_ALI15X3=m -CONFIG_I2C_AMD756=m -CONFIG_I2C_AMD756_S4882=m -CONFIG_I2C_AMD8111=m -CONFIG_I2C_I801=m -CONFIG_I2C_ISCH=m -CONFIG_I2C_ISMT=m -CONFIG_I2C_PIIX4=m -CONFIG_I2C_NFORCE2=m -CONFIG_I2C_NFORCE2_S4985=m -CONFIG_I2C_SIS5595=m -CONFIG_I2C_SIS630=m -CONFIG_I2C_SIS96X=m -CONFIG_I2C_VIA=m -CONFIG_I2C_VIAPRO=m - -# -# ACPI drivers -# -CONFIG_I2C_SCMI=m - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_CBUS_GPIO=m -CONFIG_I2C_DESIGNWARE_CORE=m -CONFIG_I2C_DESIGNWARE_PLATFORM=m -# CONFIG_I2C_DESIGNWARE_SLAVE is not set -CONFIG_I2C_DESIGNWARE_PCI=m -# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set -CONFIG_I2C_EMEV2=m -CONFIG_I2C_GPIO=m -CONFIG_I2C_KEMPLD=m -CONFIG_I2C_OCORES=m -CONFIG_I2C_PCA_PLATFORM=m -# CONFIG_I2C_PXA_PCI is not set -CONFIG_I2C_SIMTEC=m -CONFIG_I2C_XILINX=m - -# -# External I2C/SMBus adapter drivers -# -CONFIG_I2C_DIOLAN_U2C=m -CONFIG_I2C_DLN2=m -CONFIG_I2C_PARPORT=m -CONFIG_I2C_PARPORT_LIGHT=m -CONFIG_I2C_ROBOTFUZZ_OSIF=m -CONFIG_I2C_TAOS_EVM=m -CONFIG_I2C_TINY_USB=m -CONFIG_I2C_VIPERBOARD=m - -# -# Other I2C/SMBus bus drivers -# -CONFIG_I2C_MLXCPLD=m -CONFIG_I2C_CROS_EC_TUNNEL=m -# CONFIG_I2C_STUB is not set -CONFIG_I2C_SLAVE=y -CONFIG_I2C_SLAVE_EEPROM=m -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -CONFIG_SPI_ALTERA=m -CONFIG_SPI_AXI_SPI_ENGINE=m -CONFIG_SPI_BITBANG=m -CONFIG_SPI_BUTTERFLY=m -CONFIG_SPI_CADENCE=m -CONFIG_SPI_DESIGNWARE=m -CONFIG_SPI_DW_PCI=m -CONFIG_SPI_DW_MID_DMA=y -CONFIG_SPI_DW_MMIO=m -CONFIG_SPI_DLN2=m -CONFIG_SPI_GPIO=m -CONFIG_SPI_LM70_LLP=m -CONFIG_SPI_OC_TINY=m -CONFIG_SPI_PXA2XX=m -CONFIG_SPI_PXA2XX_PCI=m -CONFIG_SPI_ROCKCHIP=m -CONFIG_SPI_SC18IS602=m -CONFIG_SPI_XCOMM=m -CONFIG_SPI_XILINX=m -CONFIG_SPI_ZYNQMP_GQSPI=m - -# -# SPI Protocol Masters -# -CONFIG_SPI_SPIDEV=m -CONFIG_SPI_LOOPBACK_TEST=m -CONFIG_SPI_TLE62X0=m -CONFIG_SPI_SLAVE=y -CONFIG_SPI_SLAVE_TIME=m -CONFIG_SPI_SLAVE_SYSTEM_CONTROL=m -CONFIG_SPMI=m -CONFIG_HSI=m -CONFIG_HSI_BOARDINFO=y - -# -# HSI controllers -# - -# -# HSI clients -# -CONFIG_HSI_CHAR=m -CONFIG_PPS=m -# CONFIG_PPS_DEBUG is not set -# CONFIG_NTP_PPS is not set - -# -# PPS clients support -# -# CONFIG_PPS_CLIENT_KTIMER is not set -CONFIG_PPS_CLIENT_LDISC=m -CONFIG_PPS_CLIENT_PARPORT=m -CONFIG_PPS_CLIENT_GPIO=m - -# -# PPS generators support -# - -# -# PTP clock support -# -CONFIG_PTP_1588_CLOCK=m -CONFIG_DP83640_PHY=m -CONFIG_PTP_1588_CLOCK_KVM=m -CONFIG_PINCTRL=y - -# -# Pin controllers -# -CONFIG_PINMUX=y -CONFIG_PINCONF=y -CONFIG_GENERIC_PINCONF=y -# CONFIG_DEBUG_PINCTRL is not set -CONFIG_PINCTRL_AMD=m -CONFIG_PINCTRL_MCP23S08=m -CONFIG_PINCTRL_BAYTRAIL=y -CONFIG_PINCTRL_CHERRYVIEW=m -CONFIG_PINCTRL_INTEL=m -CONFIG_PINCTRL_BROXTON=m -CONFIG_PINCTRL_CANNONLAKE=m -CONFIG_PINCTRL_DENVERTON=m -CONFIG_PINCTRL_GEMINILAKE=m -CONFIG_PINCTRL_LEWISBURG=m -CONFIG_PINCTRL_SUNRISEPOINT=m -CONFIG_GPIOLIB=y -CONFIG_GPIO_ACPI=y -CONFIG_GPIOLIB_IRQCHIP=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GENERIC=m -CONFIG_GPIO_MAX730X=m - -# -# Memory mapped GPIO drivers -# -CONFIG_GPIO_AMDPT=m -CONFIG_GPIO_AXP209=m -CONFIG_GPIO_DWAPB=m -CONFIG_GPIO_EXAR=m -CONFIG_GPIO_GENERIC_PLATFORM=m -CONFIG_GPIO_ICH=m -CONFIG_GPIO_LYNXPOINT=y -CONFIG_GPIO_MENZ127=m -CONFIG_GPIO_MOCKUP=m -CONFIG_GPIO_VX855=m - -# -# Port-mapped I/O GPIO drivers -# -CONFIG_GPIO_F7188X=m -CONFIG_GPIO_IT87=m -CONFIG_GPIO_SCH=m -CONFIG_GPIO_SCH311X=m - -# -# I2C GPIO expanders -# -CONFIG_GPIO_ADP5588=m -CONFIG_GPIO_MAX7300=m -CONFIG_GPIO_MAX732X=m -CONFIG_GPIO_PCA953X=m -CONFIG_GPIO_PCF857X=m -CONFIG_GPIO_TPIC2810=m - -# -# MFD GPIO expanders -# -CONFIG_GPIO_ARIZONA=m -CONFIG_GPIO_BD9571MWV=m -CONFIG_GPIO_DA9052=m -CONFIG_GPIO_DLN2=m -CONFIG_GPIO_JANZ_TTL=m -CONFIG_GPIO_KEMPLD=m -CONFIG_GPIO_LP3943=m -CONFIG_GPIO_LP873X=m -CONFIG_GPIO_TPS65086=m -CONFIG_GPIO_TPS65218=m -CONFIG_GPIO_TPS65912=m -CONFIG_GPIO_UCB1400=m -CONFIG_GPIO_WHISKEY_COVE=m -CONFIG_GPIO_WM831X=m -CONFIG_GPIO_WM8994=m - -# -# PCI GPIO expanders -# -CONFIG_GPIO_AMD8111=m -CONFIG_GPIO_ML_IOH=m -CONFIG_GPIO_PCI_IDIO_16=m -CONFIG_GPIO_RDC321X=m - -# -# SPI GPIO expanders -# -CONFIG_GPIO_MAX7301=m -CONFIG_GPIO_MC33880=m -CONFIG_GPIO_PISOSR=m -CONFIG_GPIO_XRA1403=m - -# -# USB GPIO expanders -# -CONFIG_GPIO_VIPERBOARD=m -CONFIG_W1=m -CONFIG_W1_CON=y - -# -# 1-wire Bus Masters -# -CONFIG_W1_MASTER_MATROX=m -CONFIG_W1_MASTER_DS2490=m -CONFIG_W1_MASTER_DS2482=m -CONFIG_W1_MASTER_DS1WM=m -CONFIG_W1_MASTER_GPIO=m - -# -# 1-wire Slaves -# -CONFIG_W1_SLAVE_THERM=m -CONFIG_W1_SLAVE_SMEM=m -# CONFIG_W1_SLAVE_DS2405 is not set -CONFIG_W1_SLAVE_DS2408=m -# CONFIG_W1_SLAVE_DS2408_READBACK is not set -CONFIG_W1_SLAVE_DS2413=m -CONFIG_W1_SLAVE_DS2406=m -CONFIG_W1_SLAVE_DS2423=m -CONFIG_W1_SLAVE_DS2805=m -CONFIG_W1_SLAVE_DS2431=m -CONFIG_W1_SLAVE_DS2433=m -CONFIG_W1_SLAVE_DS2433_CRC=y -CONFIG_W1_SLAVE_DS2438=m -CONFIG_W1_SLAVE_DS2760=m -CONFIG_W1_SLAVE_DS2780=m -CONFIG_W1_SLAVE_DS2781=m -CONFIG_W1_SLAVE_DS28E04=m -CONFIG_POWER_AVS=y -CONFIG_POWER_RESET=y -# CONFIG_POWER_RESET_RESTART is not set -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -CONFIG_PDA_POWER=m -CONFIG_GENERIC_ADC_BATTERY=m -CONFIG_WM831X_BACKUP=m -CONFIG_WM831X_POWER=m -# CONFIG_TEST_POWER is not set -CONFIG_BATTERY_DS2760=m -CONFIG_BATTERY_DS2780=m -CONFIG_BATTERY_DS2781=m -CONFIG_BATTERY_DS2782=m -CONFIG_BATTERY_SBS=m -CONFIG_CHARGER_SBS=m -CONFIG_BATTERY_BQ27XXX=m -CONFIG_BATTERY_BQ27XXX_I2C=m -CONFIG_BATTERY_BQ27XXX_HDQ=m -# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set -CONFIG_BATTERY_DA9052=m -CONFIG_CHARGER_DA9150=m -CONFIG_BATTERY_DA9150=m -CONFIG_CHARGER_AXP20X=m -CONFIG_BATTERY_AXP20X=m -CONFIG_AXP20X_POWER=m -CONFIG_AXP288_CHARGER=m -CONFIG_AXP288_FUEL_GAUGE=m -CONFIG_BATTERY_MAX17040=m -CONFIG_BATTERY_MAX17042=m -CONFIG_BATTERY_MAX1721X=m -CONFIG_CHARGER_PCF50633=m -CONFIG_CHARGER_ISP1704=m -CONFIG_CHARGER_MAX8903=m -CONFIG_CHARGER_LP8727=m -CONFIG_CHARGER_GPIO=m -CONFIG_CHARGER_MANAGER=y -CONFIG_CHARGER_LTC3651=m -CONFIG_CHARGER_MAX14577=m -CONFIG_CHARGER_MAX77693=m -CONFIG_CHARGER_BQ2415X=m -CONFIG_CHARGER_BQ24190=m -CONFIG_CHARGER_BQ24257=m -CONFIG_CHARGER_BQ24735=m -CONFIG_CHARGER_BQ25890=m -CONFIG_CHARGER_SMB347=m -CONFIG_CHARGER_TPS65217=m -CONFIG_BATTERY_GAUGE_LTC2941=m -CONFIG_BATTERY_RT5033=m -CONFIG_CHARGER_RT9455=m -CONFIG_HWMON=m -CONFIG_HWMON_VID=m -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Native drivers -# -CONFIG_SENSORS_ABITUGURU=m -CONFIG_SENSORS_ABITUGURU3=m -CONFIG_SENSORS_AD7314=m -CONFIG_SENSORS_AD7414=m -CONFIG_SENSORS_AD7418=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_ADT7X10=m -CONFIG_SENSORS_ADT7310=m -CONFIG_SENSORS_ADT7410=m -CONFIG_SENSORS_ADT7411=m -CONFIG_SENSORS_ADT7462=m -CONFIG_SENSORS_ADT7470=m -CONFIG_SENSORS_ADT7475=m -CONFIG_SENSORS_ASC7621=m -CONFIG_SENSORS_K8TEMP=m -CONFIG_SENSORS_K10TEMP=m -CONFIG_SENSORS_FAM15H_POWER=m -CONFIG_SENSORS_APPLESMC=m -CONFIG_SENSORS_ASB100=m -CONFIG_SENSORS_ASPEED=m -CONFIG_SENSORS_ATXP1=m -CONFIG_SENSORS_DS620=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_DELL_SMM=m -CONFIG_SENSORS_DA9052_ADC=m -CONFIG_SENSORS_I5K_AMB=m -CONFIG_SENSORS_F71805F=m -CONFIG_SENSORS_F71882FG=m -CONFIG_SENSORS_F75375S=m -CONFIG_SENSORS_MC13783_ADC=m -CONFIG_SENSORS_FSCHMD=m -CONFIG_SENSORS_FTSTEUTATES=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_G760A=m -CONFIG_SENSORS_G762=m -CONFIG_SENSORS_GPIO_FAN=m -CONFIG_SENSORS_HIH6130=m -CONFIG_SENSORS_IBMAEM=m -CONFIG_SENSORS_IBMPEX=m -CONFIG_SENSORS_IIO_HWMON=m -CONFIG_SENSORS_I5500=m -CONFIG_SENSORS_CORETEMP=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_JC42=m -CONFIG_SENSORS_POWR1220=m -CONFIG_SENSORS_LINEAGE=m -CONFIG_SENSORS_LTC2945=m -CONFIG_SENSORS_LTC2990=m -CONFIG_SENSORS_LTC4151=m -CONFIG_SENSORS_LTC4215=m -CONFIG_SENSORS_LTC4222=m -CONFIG_SENSORS_LTC4245=m -CONFIG_SENSORS_LTC4260=m -CONFIG_SENSORS_LTC4261=m -CONFIG_SENSORS_MAX1111=m -CONFIG_SENSORS_MAX16065=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_MAX1668=m -CONFIG_SENSORS_MAX197=m -CONFIG_SENSORS_MAX31722=m -CONFIG_SENSORS_MAX6639=m -CONFIG_SENSORS_MAX6642=m -CONFIG_SENSORS_MAX6650=m -CONFIG_SENSORS_MAX6697=m -CONFIG_SENSORS_MAX31790=m -CONFIG_SENSORS_MCP3021=m -CONFIG_SENSORS_TC654=m -CONFIG_SENSORS_MENF21BMC_HWMON=m -CONFIG_SENSORS_ADCXX=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM70=m -CONFIG_SENSORS_LM73=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_LM93=m -CONFIG_SENSORS_LM95234=m -CONFIG_SENSORS_LM95241=m -CONFIG_SENSORS_LM95245=m -CONFIG_SENSORS_PC87360=m -CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_NTC_THERMISTOR=m -CONFIG_SENSORS_NCT6683=m -CONFIG_SENSORS_NCT6775=m -CONFIG_SENSORS_NCT7802=m -CONFIG_SENSORS_NCT7904=m -CONFIG_SENSORS_PCF8591=m -CONFIG_PMBUS=m -CONFIG_SENSORS_PMBUS=m -CONFIG_SENSORS_ADM1275=m -CONFIG_SENSORS_IBM_CFFPS=m -CONFIG_SENSORS_IR35221=m -CONFIG_SENSORS_LM25066=m -CONFIG_SENSORS_LTC2978=m -CONFIG_SENSORS_LTC2978_REGULATOR=y -CONFIG_SENSORS_LTC3815=m -CONFIG_SENSORS_MAX16064=m -CONFIG_SENSORS_MAX20751=m -CONFIG_SENSORS_MAX34440=m -CONFIG_SENSORS_MAX8688=m -CONFIG_SENSORS_TPS40422=m -CONFIG_SENSORS_TPS53679=m -CONFIG_SENSORS_UCD9000=m -CONFIG_SENSORS_UCD9200=m -CONFIG_SENSORS_ZL6100=m -CONFIG_SENSORS_SHT15=m -CONFIG_SENSORS_SHT21=m -CONFIG_SENSORS_SHT3x=m -CONFIG_SENSORS_SHTC1=m -CONFIG_SENSORS_SIS5595=m -CONFIG_SENSORS_DME1737=m -CONFIG_SENSORS_EMC1403=m -CONFIG_SENSORS_EMC2103=m -CONFIG_SENSORS_EMC6W201=m -CONFIG_SENSORS_SMSC47M1=m -CONFIG_SENSORS_SMSC47M192=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_SCH56XX_COMMON=m -CONFIG_SENSORS_SCH5627=m -CONFIG_SENSORS_SCH5636=m -CONFIG_SENSORS_STTS751=m -CONFIG_SENSORS_SMM665=m -CONFIG_SENSORS_ADC128D818=m -CONFIG_SENSORS_ADS1015=m -CONFIG_SENSORS_ADS7828=m -CONFIG_SENSORS_ADS7871=m -CONFIG_SENSORS_AMC6821=m -CONFIG_SENSORS_INA209=m -CONFIG_SENSORS_INA2XX=m -CONFIG_SENSORS_INA3221=m -CONFIG_SENSORS_TC74=m -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_TMP102=m -CONFIG_SENSORS_TMP103=m -CONFIG_SENSORS_TMP108=m -CONFIG_SENSORS_TMP401=m -CONFIG_SENSORS_TMP421=m -CONFIG_SENSORS_VIA_CPUTEMP=m -CONFIG_SENSORS_VIA686A=m -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83795=m -# CONFIG_SENSORS_W83795_FANCTRL is not set -CONFIG_SENSORS_W83L785TS=m -CONFIG_SENSORS_W83L786NG=m -CONFIG_SENSORS_W83627HF=m -CONFIG_SENSORS_W83627EHF=m -CONFIG_SENSORS_WM831X=m -CONFIG_SENSORS_XGENE=m - -# -# ACPI drivers -# -CONFIG_SENSORS_ACPI_POWER=m -CONFIG_SENSORS_ATK0110=m -CONFIG_THERMAL=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_WRITABLE_TRIPS=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set -# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set -# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set -CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_GOV_BANG_BANG=y -CONFIG_THERMAL_GOV_USER_SPACE=y -# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set -CONFIG_CLOCK_THERMAL=y -CONFIG_DEVFREQ_THERMAL=y -# CONFIG_THERMAL_EMULATION is not set -CONFIG_INTEL_POWERCLAMP=m -CONFIG_X86_PKG_TEMP_THERMAL=m -CONFIG_INTEL_SOC_DTS_IOSF_CORE=m -CONFIG_INTEL_SOC_DTS_THERMAL=m - -# -# ACPI INT340X thermal drivers -# -CONFIG_INT340X_THERMAL=m -CONFIG_ACPI_THERMAL_REL=m -CONFIG_INT3406_THERMAL=m -CONFIG_INTEL_BXT_PMIC_THERMAL=m -CONFIG_INTEL_PCH_THERMAL=m -CONFIG_GENERIC_ADC_THERMAL=m -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WATCHDOG_NOWAYOUT is not set -CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y -# CONFIG_WATCHDOG_SYSFS is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=m -# CONFIG_SOFT_WATCHDOG_PRETIMEOUT is not set -CONFIG_DA9052_WATCHDOG=m -CONFIG_DA9063_WATCHDOG=m -CONFIG_DA9062_WATCHDOG=m -CONFIG_MENF21BMC_WATCHDOG=m -CONFIG_WDAT_WDT=m -CONFIG_WM831X_WATCHDOG=m -CONFIG_XILINX_WATCHDOG=m -CONFIG_ZIIRAVE_WATCHDOG=m -CONFIG_CADENCE_WATCHDOG=m -CONFIG_DW_WATCHDOG=m -CONFIG_MAX63XX_WATCHDOG=m -CONFIG_RETU_WATCHDOG=m -CONFIG_ACQUIRE_WDT=m -CONFIG_ADVANTECH_WDT=m -CONFIG_ALIM1535_WDT=m -CONFIG_ALIM7101_WDT=m -CONFIG_F71808E_WDT=m -# CONFIG_SP5100_TCO is not set -CONFIG_SBC_FITPC2_WATCHDOG=m -CONFIG_EUROTECH_WDT=m -CONFIG_IB700_WDT=m -CONFIG_IBMASR=m -CONFIG_WAFER_WDT=m -CONFIG_I6300ESB_WDT=m -CONFIG_IE6XX_WDT=m -CONFIG_ITCO_WDT=m -CONFIG_ITCO_VENDOR_SUPPORT=y -CONFIG_IT8712F_WDT=m -CONFIG_IT87_WDT=m -CONFIG_HP_WATCHDOG=m -CONFIG_KEMPLD_WDT=m -CONFIG_HPWDT_NMI_DECODING=y -CONFIG_SC1200_WDT=m -CONFIG_PC87413_WDT=m -CONFIG_NV_TCO=m -CONFIG_60XX_WDT=m -CONFIG_CPU5_WDT=m -CONFIG_SMSC_SCH311X_WDT=m -CONFIG_SMSC37B787_WDT=m -CONFIG_VIA_WDT=m -CONFIG_W83627HF_WDT=m -CONFIG_W83877F_WDT=m -CONFIG_W83977F_WDT=m -CONFIG_MACHZ_WDT=m -CONFIG_SBC_EPX_C3_WATCHDOG=m -CONFIG_INTEL_MEI_WDT=m -CONFIG_NI903X_WDT=m -CONFIG_NIC7018_WDT=m -CONFIG_MEN_A21_WDT=m - -# -# PCI-based Watchdog Cards -# -CONFIG_PCIPCWATCHDOG=m -CONFIG_WDTPCI=m - -# -# USB-based Watchdog Cards -# -CONFIG_USBPCWATCHDOG=m - -# -# Watchdog Pretimeout Governors -# -CONFIG_WATCHDOG_PRETIMEOUT_GOV=y -# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set -CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y -CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=m -CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -CONFIG_SSB=m -CONFIG_SSB_SPROM=y -CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_PCMCIAHOST_POSSIBLE=y -CONFIG_SSB_PCMCIAHOST=y -CONFIG_SSB_SDIOHOST_POSSIBLE=y -CONFIG_SSB_SDIOHOST=y -# CONFIG_SSB_DEBUG is not set -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_GPIO=y -CONFIG_BCMA_POSSIBLE=y -CONFIG_BCMA=m -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_PCI=y -CONFIG_BCMA_HOST_SOC=y -CONFIG_BCMA_DRIVER_PCI=y -CONFIG_BCMA_SFLASH=y -CONFIG_BCMA_DRIVER_GMAC_CMN=y -CONFIG_BCMA_DRIVER_GPIO=y -# CONFIG_BCMA_DEBUG is not set - -# -# Multifunction device drivers -# -CONFIG_MFD_CORE=y -CONFIG_MFD_BCM590XX=m -CONFIG_MFD_BD9571MWV=m -CONFIG_MFD_AXP20X=m -CONFIG_MFD_AXP20X_I2C=m -CONFIG_MFD_CROS_EC=m -CONFIG_MFD_CROS_EC_I2C=m -CONFIG_MFD_CROS_EC_SPI=m -CONFIG_PMIC_DA9052=y -CONFIG_MFD_DA9052_SPI=y -CONFIG_MFD_DA9062=m -CONFIG_MFD_DA9063=m -CONFIG_MFD_DA9150=m -CONFIG_MFD_DLN2=m -CONFIG_MFD_MC13XXX=m -CONFIG_MFD_MC13XXX_SPI=m -CONFIG_MFD_MC13XXX_I2C=m -CONFIG_HTC_PASIC3=m -CONFIG_MFD_INTEL_QUARK_I2C_GPIO=m -CONFIG_LPC_ICH=m -CONFIG_LPC_SCH=m -CONFIG_INTEL_SOC_PMIC_BXTWC=m -CONFIG_MFD_INTEL_LPSS=m -CONFIG_MFD_INTEL_LPSS_ACPI=m -CONFIG_MFD_INTEL_LPSS_PCI=m -CONFIG_MFD_JANZ_CMODIO=m -CONFIG_MFD_KEMPLD=m -CONFIG_MFD_88PM800=m -CONFIG_MFD_88PM805=m -CONFIG_MFD_MAX14577=m -CONFIG_MFD_MAX77693=m -CONFIG_MFD_MAX8907=m -CONFIG_MFD_MT6397=m -CONFIG_MFD_MENF21BMC=m -CONFIG_EZX_PCAP=y -CONFIG_MFD_VIPERBOARD=m -CONFIG_MFD_RETU=m -CONFIG_MFD_PCF50633=m -CONFIG_PCF50633_ADC=m -CONFIG_PCF50633_GPIO=m -CONFIG_UCB1400_CORE=m -CONFIG_MFD_RDC321X=m -CONFIG_MFD_RTSX_PCI=m -CONFIG_MFD_RT5033=m -CONFIG_MFD_RTSX_USB=m -CONFIG_MFD_SI476X_CORE=m -CONFIG_MFD_SM501=m -CONFIG_MFD_SM501_GPIO=y -CONFIG_MFD_SKY81452=m -CONFIG_ABX500_CORE=y -CONFIG_MFD_SYSCON=y -CONFIG_MFD_TI_AM335X_TSCADC=m -CONFIG_MFD_LP3943=m -CONFIG_MFD_TI_LMU=m -CONFIG_TPS6105X=m -CONFIG_TPS65010=m -CONFIG_TPS6507X=m -CONFIG_MFD_TPS65086=m -CONFIG_MFD_TPS65217=m -CONFIG_MFD_TI_LP873X=m -CONFIG_MFD_TPS65218=m -CONFIG_MFD_TPS65912=y -CONFIG_MFD_TPS65912_I2C=m -CONFIG_MFD_TPS65912_SPI=y -CONFIG_MFD_WL1273_CORE=m -CONFIG_MFD_LM3533=m -# CONFIG_MFD_TMIO is not set -CONFIG_MFD_VX855=m -CONFIG_MFD_ARIZONA=y -CONFIG_MFD_ARIZONA_I2C=m -CONFIG_MFD_ARIZONA_SPI=m -CONFIG_MFD_CS47L24=y -CONFIG_MFD_WM5102=y -CONFIG_MFD_WM5110=y -CONFIG_MFD_WM8997=y -CONFIG_MFD_WM8998=y -CONFIG_MFD_WM831X=y -CONFIG_MFD_WM831X_SPI=y -CONFIG_MFD_WM8994=m -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=m -CONFIG_REGULATOR_VIRTUAL_CONSUMER=m -CONFIG_REGULATOR_USERSPACE_CONSUMER=m -CONFIG_REGULATOR_88PM800=m -CONFIG_REGULATOR_ACT8865=m -CONFIG_REGULATOR_AD5398=m -CONFIG_REGULATOR_ANATOP=m -CONFIG_REGULATOR_ARIZONA_LDO1=m -CONFIG_REGULATOR_ARIZONA_MICSUPP=m -CONFIG_REGULATOR_AXP20X=m -CONFIG_REGULATOR_BCM590XX=m -CONFIG_REGULATOR_BD9571MWV=m -CONFIG_REGULATOR_DA9052=m -CONFIG_REGULATOR_DA9062=m -CONFIG_REGULATOR_DA9063=m -CONFIG_REGULATOR_DA9210=m -CONFIG_REGULATOR_DA9211=m -CONFIG_REGULATOR_FAN53555=m -CONFIG_REGULATOR_GPIO=m -CONFIG_REGULATOR_ISL9305=m -CONFIG_REGULATOR_ISL6271A=m -CONFIG_REGULATOR_LM363X=m -CONFIG_REGULATOR_LP3971=m -CONFIG_REGULATOR_LP3972=m -CONFIG_REGULATOR_LP872X=m -CONFIG_REGULATOR_LP8755=m -CONFIG_REGULATOR_LTC3589=m -CONFIG_REGULATOR_LTC3676=m -CONFIG_REGULATOR_MAX14577=m -CONFIG_REGULATOR_MAX1586=m -CONFIG_REGULATOR_MAX8649=m -CONFIG_REGULATOR_MAX8660=m -CONFIG_REGULATOR_MAX8907=m -CONFIG_REGULATOR_MAX8952=m -CONFIG_REGULATOR_MAX77693=m -CONFIG_REGULATOR_MC13XXX_CORE=m -CONFIG_REGULATOR_MC13783=m -CONFIG_REGULATOR_MC13892=m -CONFIG_REGULATOR_MT6311=m -CONFIG_REGULATOR_MT6323=m -CONFIG_REGULATOR_MT6397=m -CONFIG_REGULATOR_PCAP=m -CONFIG_REGULATOR_PCF50633=m -CONFIG_REGULATOR_PFUZE100=m -CONFIG_REGULATOR_PV88060=m -CONFIG_REGULATOR_PV88080=m -CONFIG_REGULATOR_PV88090=m -CONFIG_REGULATOR_PWM=m -CONFIG_REGULATOR_QCOM_SPMI=m -CONFIG_REGULATOR_RT5033=m -CONFIG_REGULATOR_SKY81452=m -CONFIG_REGULATOR_TPS51632=m -CONFIG_REGULATOR_TPS6105X=m -CONFIG_REGULATOR_TPS62360=m -CONFIG_REGULATOR_TPS65023=m -CONFIG_REGULATOR_TPS6507X=m -CONFIG_REGULATOR_TPS65086=m -CONFIG_REGULATOR_TPS65132=m -CONFIG_REGULATOR_TPS65217=m -CONFIG_REGULATOR_TPS6524X=m -CONFIG_REGULATOR_TPS65912=m -CONFIG_REGULATOR_WM831X=m -CONFIG_REGULATOR_WM8994=m -CONFIG_CEC_CORE=m -CONFIG_RC_CORE=m -CONFIG_RC_MAP=m -CONFIG_RC_DECODERS=y -CONFIG_LIRC=m -CONFIG_IR_LIRC_CODEC=m -CONFIG_IR_NEC_DECODER=m -CONFIG_IR_RC5_DECODER=m -CONFIG_IR_RC6_DECODER=m -CONFIG_IR_JVC_DECODER=m -CONFIG_IR_SONY_DECODER=m -CONFIG_IR_SANYO_DECODER=m -CONFIG_IR_SHARP_DECODER=m -CONFIG_IR_MCE_KBD_DECODER=m -CONFIG_IR_XMP_DECODER=m -CONFIG_RC_DEVICES=y -CONFIG_RC_ATI_REMOTE=m -CONFIG_IR_ENE=m -CONFIG_IR_HIX5HD2=m -CONFIG_IR_IMON=m -CONFIG_IR_MCEUSB=m -CONFIG_IR_ITE_CIR=m -CONFIG_IR_FINTEK=m -CONFIG_IR_NUVOTON=m -CONFIG_IR_REDRAT3=m -CONFIG_IR_SPI=m -CONFIG_IR_STREAMZAP=m -CONFIG_IR_WINBOND_CIR=m -CONFIG_IR_IGORPLUGUSB=m -CONFIG_IR_IGUANA=m -CONFIG_IR_TTUSBIR=m -CONFIG_RC_LOOPBACK=m -CONFIG_IR_GPIO_CIR=m -CONFIG_IR_GPIO_TX=m -CONFIG_IR_PWM_TX=m -CONFIG_IR_SERIAL=m -CONFIG_IR_SERIAL_TRANSMITTER=y -CONFIG_IR_SIR=m -CONFIG_MEDIA_SUPPORT=m - -# -# Multimedia core support -# -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -CONFIG_MEDIA_RADIO_SUPPORT=y -CONFIG_MEDIA_SDR_SUPPORT=y -CONFIG_MEDIA_CEC_SUPPORT=y -CONFIG_MEDIA_CEC_RC=y -CONFIG_MEDIA_CONTROLLER=y -CONFIG_MEDIA_CONTROLLER_DVB=y -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2_SUBDEV_API=y -CONFIG_VIDEO_V4L2=m -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_PCI_SKELETON=m -CONFIG_VIDEO_TUNER=m -CONFIG_V4L2_MEM2MEM_DEV=m -CONFIG_V4L2_FLASH_LED_CLASS=m -CONFIG_V4L2_FWNODE=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_DMA_SG=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_VIDEOBUF_DVB=m -CONFIG_VIDEOBUF2_CORE=m -CONFIG_VIDEOBUF2_MEMOPS=m -CONFIG_VIDEOBUF2_DMA_CONTIG=m -CONFIG_VIDEOBUF2_VMALLOC=m -CONFIG_VIDEOBUF2_DMA_SG=m -CONFIG_VIDEOBUF2_DVB=m -CONFIG_DVB_CORE=m -CONFIG_DVB_NET=y -CONFIG_TTPCI_EEPROM=m -CONFIG_DVB_MAX_ADAPTERS=8 -CONFIG_DVB_DYNAMIC_MINORS=y -# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set - -# -# Media drivers -# -CONFIG_MEDIA_USB_SUPPORT=y - -# -# Webcam devices -# -CONFIG_USB_VIDEO_CLASS=m -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -CONFIG_USB_M5602=m -CONFIG_USB_STV06XX=m -CONFIG_USB_GL860=m -CONFIG_USB_GSPCA_BENQ=m -CONFIG_USB_GSPCA_CONEX=m -CONFIG_USB_GSPCA_CPIA1=m -CONFIG_USB_GSPCA_DTCS033=m -CONFIG_USB_GSPCA_ETOMS=m -CONFIG_USB_GSPCA_FINEPIX=m -CONFIG_USB_GSPCA_JEILINJ=m -CONFIG_USB_GSPCA_JL2005BCD=m -CONFIG_USB_GSPCA_KINECT=m -CONFIG_USB_GSPCA_KONICA=m -CONFIG_USB_GSPCA_MARS=m -CONFIG_USB_GSPCA_MR97310A=m -CONFIG_USB_GSPCA_NW80X=m -CONFIG_USB_GSPCA_OV519=m -CONFIG_USB_GSPCA_OV534=m -CONFIG_USB_GSPCA_OV534_9=m -CONFIG_USB_GSPCA_PAC207=m -CONFIG_USB_GSPCA_PAC7302=m -CONFIG_USB_GSPCA_PAC7311=m -CONFIG_USB_GSPCA_SE401=m -CONFIG_USB_GSPCA_SN9C2028=m -CONFIG_USB_GSPCA_SN9C20X=m -CONFIG_USB_GSPCA_SONIXB=m -CONFIG_USB_GSPCA_SONIXJ=m -CONFIG_USB_GSPCA_SPCA500=m -CONFIG_USB_GSPCA_SPCA501=m -CONFIG_USB_GSPCA_SPCA505=m -CONFIG_USB_GSPCA_SPCA506=m -CONFIG_USB_GSPCA_SPCA508=m -CONFIG_USB_GSPCA_SPCA561=m -CONFIG_USB_GSPCA_SPCA1528=m -CONFIG_USB_GSPCA_SQ905=m -CONFIG_USB_GSPCA_SQ905C=m -CONFIG_USB_GSPCA_SQ930X=m -CONFIG_USB_GSPCA_STK014=m -CONFIG_USB_GSPCA_STK1135=m -CONFIG_USB_GSPCA_STV0680=m -CONFIG_USB_GSPCA_SUNPLUS=m -CONFIG_USB_GSPCA_T613=m -CONFIG_USB_GSPCA_TOPRO=m -CONFIG_USB_GSPCA_TOUPTEK=m -CONFIG_USB_GSPCA_TV8532=m -CONFIG_USB_GSPCA_VC032X=m -CONFIG_USB_GSPCA_VICAM=m -CONFIG_USB_GSPCA_XIRLINK_CIT=m -CONFIG_USB_GSPCA_ZC3XX=m -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -CONFIG_USB_PWC_INPUT_EVDEV=y -CONFIG_VIDEO_CPIA2=m -CONFIG_USB_ZR364XX=m -CONFIG_USB_STKWEBCAM=m -CONFIG_USB_S2255=m -CONFIG_VIDEO_USBTV=m - -# -# Analog TV USB devices -# -CONFIG_VIDEO_PVRUSB2=m -CONFIG_VIDEO_PVRUSB2_SYSFS=y -CONFIG_VIDEO_PVRUSB2_DVB=y -# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set -CONFIG_VIDEO_HDPVR=m -CONFIG_VIDEO_USBVISION=m -CONFIG_VIDEO_STK1160_COMMON=m -CONFIG_VIDEO_STK1160=m -CONFIG_VIDEO_GO7007=m -CONFIG_VIDEO_GO7007_USB=m -CONFIG_VIDEO_GO7007_LOADER=m -CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m - -# -# Analog/digital TV USB devices -# -CONFIG_VIDEO_AU0828=m -CONFIG_VIDEO_AU0828_V4L2=y -CONFIG_VIDEO_AU0828_RC=y -CONFIG_VIDEO_CX231XX=m -CONFIG_VIDEO_CX231XX_RC=y -CONFIG_VIDEO_CX231XX_ALSA=m -CONFIG_VIDEO_CX231XX_DVB=m -CONFIG_VIDEO_TM6000=m -CONFIG_VIDEO_TM6000_ALSA=m -CONFIG_VIDEO_TM6000_DVB=m - -# -# Digital TV USB devices -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_DIB3000MC=m -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -CONFIG_DVB_USB_PCTV452E=m -CONFIG_DVB_USB_DW2102=m -CONFIG_DVB_USB_CINERGY_T2=m -CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_FRIIO=m -CONFIG_DVB_USB_AZ6027=m -CONFIG_DVB_USB_TECHNISAT_USB2=m -CONFIG_DVB_USB_V2=m -CONFIG_DVB_USB_AF9015=m -CONFIG_DVB_USB_AF9035=m -CONFIG_DVB_USB_ANYSEE=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_AZ6007=m -CONFIG_DVB_USB_CE6230=m -CONFIG_DVB_USB_EC168=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_LME2510=m -CONFIG_DVB_USB_MXL111SF=m -CONFIG_DVB_USB_RTL28XXU=m -CONFIG_DVB_USB_DVBSKY=m -CONFIG_DVB_USB_ZD1301=m -CONFIG_DVB_TTUSB_BUDGET=m -CONFIG_DVB_TTUSB_DEC=m -CONFIG_SMS_USB_DRV=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set -CONFIG_DVB_AS102=m - -# -# Webcam, TV (analog/digital) USB devices -# -CONFIG_VIDEO_EM28XX=m -CONFIG_VIDEO_EM28XX_V4L2=m -CONFIG_VIDEO_EM28XX_ALSA=m -CONFIG_VIDEO_EM28XX_DVB=m -CONFIG_VIDEO_EM28XX_RC=m - -# -# Software defined radio USB devices -# -CONFIG_USB_AIRSPY=m -CONFIG_USB_HACKRF=m -CONFIG_USB_MSI2500=m - -# -# USB HDMI CEC adapters -# -CONFIG_USB_PULSE8_CEC=m -CONFIG_USB_RAINSHADOW_CEC=m -CONFIG_MEDIA_PCI_SUPPORT=y - -# -# Media capture support -# -CONFIG_VIDEO_MEYE=m -CONFIG_VIDEO_SOLO6X10=m -CONFIG_VIDEO_TW5864=m -CONFIG_VIDEO_TW68=m -CONFIG_VIDEO_TW686X=m -CONFIG_VIDEO_ZORAN=m -CONFIG_VIDEO_ZORAN_DC30=m -CONFIG_VIDEO_ZORAN_ZR36060=m -CONFIG_VIDEO_ZORAN_BUZ=m -CONFIG_VIDEO_ZORAN_DC10=m -CONFIG_VIDEO_ZORAN_LML33=m -CONFIG_VIDEO_ZORAN_LML33R10=m -CONFIG_VIDEO_ZORAN_AVS6EYES=m - -# -# Media capture/analog TV support -# -CONFIG_VIDEO_IVTV=m -# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set -CONFIG_VIDEO_IVTV_ALSA=m -CONFIG_VIDEO_FB_IVTV=m -CONFIG_VIDEO_HEXIUM_GEMINI=m -CONFIG_VIDEO_HEXIUM_ORION=m -CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DT3155=m - -# -# Media capture/analog/hybrid TV support -# -CONFIG_VIDEO_CX18=m -CONFIG_VIDEO_CX18_ALSA=m -CONFIG_VIDEO_CX23885=m -CONFIG_MEDIA_ALTERA_CI=m -CONFIG_VIDEO_CX25821=m -CONFIG_VIDEO_CX25821_ALSA=m -CONFIG_VIDEO_CX88=m -CONFIG_VIDEO_CX88_ALSA=m -CONFIG_VIDEO_CX88_BLACKBIRD=m -CONFIG_VIDEO_CX88_DVB=m -CONFIG_VIDEO_CX88_ENABLE_VP3054=y -CONFIG_VIDEO_CX88_VP3054=m -CONFIG_VIDEO_CX88_MPEG=m -CONFIG_VIDEO_BT848=m -CONFIG_DVB_BT8XX=m -CONFIG_VIDEO_SAA7134=m -CONFIG_VIDEO_SAA7134_ALSA=m -CONFIG_VIDEO_SAA7134_RC=y -CONFIG_VIDEO_SAA7134_DVB=m -CONFIG_VIDEO_SAA7134_GO7007=m -CONFIG_VIDEO_SAA7164=m -# CONFIG_VIDEO_COBALT is not set - -# -# Media digital TV PCI Adapters -# -CONFIG_DVB_AV7110_IR=y -CONFIG_DVB_AV7110=m -CONFIG_DVB_AV7110_OSD=y -CONFIG_DVB_BUDGET_CORE=m -CONFIG_DVB_BUDGET=m -CONFIG_DVB_BUDGET_CI=m -CONFIG_DVB_BUDGET_AV=m -CONFIG_DVB_BUDGET_PATCH=m -CONFIG_DVB_B2C2_FLEXCOP_PCI=m -# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set -CONFIG_DVB_PLUTO2=m -CONFIG_DVB_DM1105=m -CONFIG_DVB_PT1=m -CONFIG_DVB_PT3=m -CONFIG_MANTIS_CORE=m -CONFIG_DVB_MANTIS=m -CONFIG_DVB_HOPPER=m -CONFIG_DVB_NGENE=m -CONFIG_DVB_DDBRIDGE=m -# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set -CONFIG_DVB_SMIPCIE=m -CONFIG_DVB_NETUP_UNIDVB=m -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VIDEO_CAFE_CCIC=m -CONFIG_SOC_CAMERA=m -CONFIG_SOC_CAMERA_PLATFORM=m -CONFIG_V4L_MEM2MEM_DRIVERS=y -CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m -CONFIG_VIDEO_SH_VEU=m -# CONFIG_V4L_TEST_DRIVERS is not set -CONFIG_DVB_PLATFORM_DRIVERS=y -CONFIG_CEC_PLATFORM_DRIVERS=y -CONFIG_SDR_PLATFORM_DRIVERS=y - -# -# Supported MMC/SDIO adapters -# -CONFIG_SMS_SDIO_DRV=m -CONFIG_RADIO_ADAPTERS=y -CONFIG_RADIO_TEA575X=m -CONFIG_RADIO_SI470X=y -CONFIG_USB_SI470X=m -CONFIG_I2C_SI470X=m -CONFIG_RADIO_SI4713=m -CONFIG_USB_SI4713=m -CONFIG_PLATFORM_SI4713=m -CONFIG_I2C_SI4713=m -CONFIG_RADIO_SI476X=m -CONFIG_USB_MR800=m -CONFIG_USB_DSBR=m -CONFIG_RADIO_MAXIRADIO=m -CONFIG_RADIO_SHARK=m -CONFIG_RADIO_SHARK2=m -CONFIG_USB_KEENE=m -CONFIG_USB_RAREMONO=m -CONFIG_USB_MA901=m -CONFIG_RADIO_TEA5764=m -CONFIG_RADIO_SAA7706H=m -CONFIG_RADIO_TEF6862=m -CONFIG_RADIO_WL1273=m - -# -# Texas Instruments WL128x FM driver (ST based) -# -CONFIG_RADIO_WL128X=m - -# -# Supported FireWire (IEEE 1394) Adapters -# -CONFIG_DVB_FIREDTV=m -CONFIG_DVB_FIREDTV_INPUT=y -CONFIG_MEDIA_COMMON_OPTIONS=y - -# -# common driver options -# -CONFIG_VIDEO_CX2341X=m -CONFIG_VIDEO_TVEEPROM=m -CONFIG_CYPRESS_FIRMWARE=m -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_VIDEO_SAA7146=m -CONFIG_VIDEO_SAA7146_VV=m -CONFIG_SMS_SIANO_MDTV=m -CONFIG_SMS_SIANO_RC=y -# CONFIG_SMS_SIANO_DEBUGFS is not set - -# -# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) -# -CONFIG_MEDIA_SUBDRV_AUTOSELECT=y -CONFIG_MEDIA_ATTACH=y -CONFIG_VIDEO_IR_I2C=m - -# -# Audio decoders, processors and mixers -# -CONFIG_VIDEO_TVAUDIO=m -CONFIG_VIDEO_TDA7432=m -CONFIG_VIDEO_TDA9840=m -CONFIG_VIDEO_TEA6415C=m -CONFIG_VIDEO_TEA6420=m -CONFIG_VIDEO_MSP3400=m -CONFIG_VIDEO_CS3308=m -CONFIG_VIDEO_CS5345=m -CONFIG_VIDEO_CS53L32A=m -CONFIG_VIDEO_UDA1342=m -CONFIG_VIDEO_WM8775=m -CONFIG_VIDEO_WM8739=m -CONFIG_VIDEO_VP27SMPX=m -CONFIG_VIDEO_SONY_BTF_MPX=m - -# -# RDS decoders -# -CONFIG_VIDEO_SAA6588=m - -# -# Video decoders -# -CONFIG_VIDEO_BT819=m -CONFIG_VIDEO_BT856=m -CONFIG_VIDEO_BT866=m -CONFIG_VIDEO_KS0127=m -CONFIG_VIDEO_SAA7110=m -CONFIG_VIDEO_SAA711X=m -CONFIG_VIDEO_TVP5150=m -CONFIG_VIDEO_TW2804=m -CONFIG_VIDEO_TW9903=m -CONFIG_VIDEO_TW9906=m -CONFIG_VIDEO_VPX3220=m - -# -# Video and audio decoders -# -CONFIG_VIDEO_SAA717X=m -CONFIG_VIDEO_CX25840=m - -# -# Video encoders -# -CONFIG_VIDEO_SAA7127=m -CONFIG_VIDEO_SAA7185=m -CONFIG_VIDEO_ADV7170=m -CONFIG_VIDEO_ADV7175=m - -# -# Camera sensor devices -# -CONFIG_VIDEO_OV2640=m -CONFIG_VIDEO_OV7640=m -CONFIG_VIDEO_OV7670=m -CONFIG_VIDEO_MT9M111=m -CONFIG_VIDEO_MT9V011=m - -# -# Flash devices -# - -# -# Video improvement chips -# -CONFIG_VIDEO_UPD64031A=m -CONFIG_VIDEO_UPD64083=m - -# -# Audio/Video compression chips -# -CONFIG_VIDEO_SAA6752HS=m - -# -# SDR tuner chips -# - -# -# Miscellaneous helper chips -# -CONFIG_VIDEO_M52790=m - -# -# Sensors used on soc_camera driver -# - -# -# soc_camera sensor drivers -# -CONFIG_SOC_CAMERA_IMX074=m -CONFIG_SOC_CAMERA_MT9M001=m -CONFIG_SOC_CAMERA_MT9M111=m -CONFIG_SOC_CAMERA_MT9T031=m -CONFIG_SOC_CAMERA_MT9T112=m -CONFIG_SOC_CAMERA_MT9V022=m -CONFIG_SOC_CAMERA_OV5642=m -CONFIG_SOC_CAMERA_OV772X=m -CONFIG_SOC_CAMERA_OV9640=m -CONFIG_SOC_CAMERA_OV9740=m -CONFIG_SOC_CAMERA_RJ54N1=m -CONFIG_SOC_CAMERA_TW9910=m -CONFIG_MEDIA_TUNER=m -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA827X=m -CONFIG_MEDIA_TUNER_TDA18271=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MSI001=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2063=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_MT2131=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_XC4000=m -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_MEDIA_TUNER_MXL5007T=m -CONFIG_MEDIA_TUNER_MC44S803=m -CONFIG_MEDIA_TUNER_MAX2165=m -CONFIG_MEDIA_TUNER_TDA18218=m -CONFIG_MEDIA_TUNER_FC0011=m -CONFIG_MEDIA_TUNER_FC0012=m -CONFIG_MEDIA_TUNER_FC0013=m -CONFIG_MEDIA_TUNER_TDA18212=m -CONFIG_MEDIA_TUNER_E4000=m -CONFIG_MEDIA_TUNER_FC2580=m -CONFIG_MEDIA_TUNER_M88RS6000T=m -CONFIG_MEDIA_TUNER_TUA9001=m -CONFIG_MEDIA_TUNER_SI2157=m -CONFIG_MEDIA_TUNER_IT913X=m -CONFIG_MEDIA_TUNER_R820T=m -CONFIG_MEDIA_TUNER_MXL301RF=m -CONFIG_MEDIA_TUNER_QM1D1C0042=m - -# -# Multistandard (satellite) frontends -# -CONFIG_DVB_STB0899=m -CONFIG_DVB_STB6100=m -CONFIG_DVB_STV090x=m -CONFIG_DVB_STV0910=m -CONFIG_DVB_STV6110x=m -CONFIG_DVB_STV6111=m -CONFIG_DVB_MXL5XX=m -CONFIG_DVB_M88DS3103=m - -# -# Multistandard (cable + terrestrial) frontends -# -CONFIG_DVB_DRXK=m -CONFIG_DVB_TDA18271C2DD=m -CONFIG_DVB_SI2165=m -CONFIG_DVB_MN88472=m -CONFIG_DVB_MN88473=m - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_CX24110=m -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_ZL10036=m -CONFIG_DVB_ZL10039=m -CONFIG_DVB_S5H1420=m -CONFIG_DVB_STV0288=m -CONFIG_DVB_STB6000=m -CONFIG_DVB_STV0299=m -CONFIG_DVB_STV6110=m -CONFIG_DVB_STV0900=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA10086=m -CONFIG_DVB_TDA8261=m -CONFIG_DVB_VES1X93=m -CONFIG_DVB_TUNER_ITD1000=m -CONFIG_DVB_TUNER_CX24113=m -CONFIG_DVB_TDA826X=m -CONFIG_DVB_TUA6100=m -CONFIG_DVB_CX24116=m -CONFIG_DVB_CX24117=m -CONFIG_DVB_CX24120=m -CONFIG_DVB_SI21XX=m -CONFIG_DVB_TS2020=m -CONFIG_DVB_DS3000=m -CONFIG_DVB_MB86A16=m -CONFIG_DVB_TDA10071=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_DRXD=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_TDA10048=m -CONFIG_DVB_AF9013=m -CONFIG_DVB_EC100=m -CONFIG_DVB_STV0367=m -CONFIG_DVB_CXD2820R=m -CONFIG_DVB_CXD2841ER=m -CONFIG_DVB_RTL2830=m -CONFIG_DVB_RTL2832=m -CONFIG_DVB_RTL2832_SDR=m -CONFIG_DVB_SI2168=m -CONFIG_DVB_AS102_FE=m -CONFIG_DVB_ZD1301_DEMOD=m -CONFIG_DVB_GP8PSK_FE=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -CONFIG_DVB_NXT200X=m -CONFIG_DVB_OR51211=m -CONFIG_DVB_OR51132=m -CONFIG_DVB_BCM3510=m -CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3305=m -CONFIG_DVB_LGDT3306A=m -CONFIG_DVB_LG2160=m -CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_AU8522_DTV=m -CONFIG_DVB_AU8522_V4L=m -CONFIG_DVB_S5H1411=m - -# -# ISDB-T (terrestrial) frontends -# -CONFIG_DVB_S921=m -CONFIG_DVB_DIB8000=m -CONFIG_DVB_MB86A20S=m - -# -# ISDB-S (satellite) & ISDB-T (terrestrial) frontends -# -CONFIG_DVB_TC90522=m - -# -# Digital terrestrial only tuners/PLL -# -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m -CONFIG_DVB_TUNER_DIB0090=m - -# -# SEC control devices for DVB-S -# -CONFIG_DVB_DRX39XYJ=m -CONFIG_DVB_LNBH25=m -CONFIG_DVB_LNBP21=m -CONFIG_DVB_LNBP22=m -CONFIG_DVB_ISL6405=m -CONFIG_DVB_ISL6421=m -CONFIG_DVB_ISL6423=m -CONFIG_DVB_A8293=m -CONFIG_DVB_SP2=m -CONFIG_DVB_LGS8GXX=m -CONFIG_DVB_ATBM8830=m -CONFIG_DVB_TDA665x=m -CONFIG_DVB_IX2505V=m -CONFIG_DVB_M88RS2000=m -CONFIG_DVB_AF9033=m -CONFIG_DVB_HORUS3A=m -CONFIG_DVB_ASCOT2E=m -CONFIG_DVB_HELENE=m - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set - -# -# Graphics support -# -CONFIG_AGP=m -CONFIG_AGP_AMD64=m -CONFIG_AGP_INTEL=m -CONFIG_AGP_SIS=m -CONFIG_AGP_VIA=m -CONFIG_INTEL_GTT=m -CONFIG_VGA_ARB=y -CONFIG_VGA_ARB_MAX_GPUS=16 -CONFIG_VGA_SWITCHEROO=y -CONFIG_DRM=m -CONFIG_DRM_MIPI_DSI=y -CONFIG_DRM_DP_AUX_CHARDEV=y -# CONFIG_DRM_DEBUG_MM_SELFTEST is not set -CONFIG_DRM_KMS_HELPER=m -CONFIG_DRM_KMS_FB_HELPER=y -CONFIG_DRM_FBDEV_EMULATION=y -CONFIG_DRM_FBDEV_OVERALLOC=100 -# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set -CONFIG_DRM_TTM=m -CONFIG_DRM_GEM_CMA_HELPER=y -CONFIG_DRM_KMS_CMA_HELPER=y -CONFIG_DRM_VM=y - -# -# I2C encoder or helper chips -# -CONFIG_DRM_I2C_CH7006=m -CONFIG_DRM_I2C_SIL164=m -CONFIG_DRM_I2C_NXP_TDA998X=m -CONFIG_DRM_RADEON=m -# CONFIG_DRM_RADEON_USERPTR is not set -CONFIG_DRM_AMDGPU=m -CONFIG_DRM_AMDGPU_SI=y -CONFIG_DRM_AMDGPU_CIK=y -CONFIG_DRM_AMDGPU_USERPTR=y -# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set - -# -# ACP (Audio CoProcessor) Configuration -# -CONFIG_DRM_AMD_ACP=y -CONFIG_DRM_NOUVEAU=m -CONFIG_NOUVEAU_DEBUG=5 -CONFIG_NOUVEAU_DEBUG_DEFAULT=3 -CONFIG_DRM_NOUVEAU_BACKLIGHT=y -CONFIG_DRM_I915=m -# CONFIG_DRM_I915_ALPHA_SUPPORT is not set -CONFIG_DRM_I915_CAPTURE_ERROR=y -CONFIG_DRM_I915_COMPRESS_ERROR=y -CONFIG_DRM_I915_USERPTR=y -CONFIG_DRM_I915_GVT=y -CONFIG_DRM_I915_GVT_KVMGT=m -CONFIG_DRM_VGEM=m -CONFIG_DRM_VMWGFX=m -CONFIG_DRM_VMWGFX_FBCON=y -CONFIG_DRM_GMA500=m -CONFIG_DRM_GMA600=y -CONFIG_DRM_GMA3600=y -CONFIG_DRM_UDL=m -CONFIG_DRM_AST=m -CONFIG_DRM_MGAG200=m -CONFIG_DRM_CIRRUS_QEMU=m -CONFIG_DRM_QXL=m -CONFIG_DRM_BOCHS=m -CONFIG_DRM_VIRTIO_GPU=m -CONFIG_DRM_PANEL=y - -# -# Display Panels -# -CONFIG_DRM_BRIDGE=y -CONFIG_DRM_PANEL_BRIDGE=y - -# -# Display Interface Bridges -# -CONFIG_DRM_ANALOGIX_ANX78XX=m -CONFIG_HSA_AMD=m -CONFIG_DRM_HISI_HIBMC=m -CONFIG_DRM_TINYDRM=m -CONFIG_TINYDRM_MIPI_DBI=m -CONFIG_TINYDRM_MI0283QT=m -CONFIG_TINYDRM_REPAPER=m -CONFIG_TINYDRM_ST7586=m -# CONFIG_DRM_LEGACY is not set -# CONFIG_DRM_LIB_RANDOM is not set - -# -# Frame buffer Devices -# -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_CMDLINE=y -CONFIG_FB_NOTIFY=y -# CONFIG_FB_DDC is not set -CONFIG_FB_BOOT_VESA_SUPPORT=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -CONFIG_FB_SYS_FILLRECT=m -CONFIG_FB_SYS_COPYAREA=m -CONFIG_FB_SYS_IMAGEBLIT=m -# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set -CONFIG_FB_FOREIGN_ENDIAN=y -CONFIG_FB_BOTH_ENDIAN=y -# CONFIG_FB_BIG_ENDIAN is not set -# CONFIG_FB_LITTLE_ENDIAN is not set -CONFIG_FB_SYS_FOPS=m -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -CONFIG_FB_BACKLIGHT=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ARC is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_UVESA is not set -CONFIG_FB_VESA=y -CONFIG_FB_EFI=y -# CONFIG_FB_N411 is not set -# CONFIG_FB_HGA is not set -# CONFIG_FB_OPENCORES is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_I740 is not set -# CONFIG_FB_LE80578 is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_VIA is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_VT8623 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_ARK is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CARMINE is not set -# CONFIG_FB_SM501 is not set -# CONFIG_FB_SMSCUFX is not set -# CONFIG_FB_UDL is not set -# CONFIG_FB_IBM_GXT4500 is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_METRONOME is not set -# CONFIG_FB_MB862XX is not set -# CONFIG_FB_BROADSHEET is not set -# CONFIG_FB_AUO_K190X is not set -# CONFIG_FB_HYPERV is not set -CONFIG_FB_SIMPLE=y -# CONFIG_FB_SM712 is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_L4F00242T03=m -CONFIG_LCD_LMS283GF05=m -CONFIG_LCD_LTV350QV=m -CONFIG_LCD_ILI922X=m -CONFIG_LCD_ILI9320=m -CONFIG_LCD_TDO24M=m -CONFIG_LCD_VGG2432A4=m -CONFIG_LCD_PLATFORM=m -CONFIG_LCD_S6E63M0=m -CONFIG_LCD_LD9040=m -CONFIG_LCD_AMS369FG06=m -CONFIG_LCD_LMS501KF03=m -CONFIG_LCD_HX8357=m -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=m -CONFIG_BACKLIGHT_LM3533=m -CONFIG_BACKLIGHT_PWM=m -CONFIG_BACKLIGHT_DA9052=m -CONFIG_BACKLIGHT_APPLE=m -CONFIG_BACKLIGHT_PM8941_WLED=m -CONFIG_BACKLIGHT_SAHARA=m -CONFIG_BACKLIGHT_WM831X=m -CONFIG_BACKLIGHT_ADP8860=m -CONFIG_BACKLIGHT_ADP8870=m -CONFIG_BACKLIGHT_PCF50633=m -CONFIG_BACKLIGHT_LM3630A=m -CONFIG_BACKLIGHT_LM3639=m -CONFIG_BACKLIGHT_LP855X=m -CONFIG_BACKLIGHT_SKY81452=m -CONFIG_BACKLIGHT_TPS65217=m -CONFIG_BACKLIGHT_GPIO=m -CONFIG_BACKLIGHT_LV5207LP=m -CONFIG_BACKLIGHT_BD6107=m -CONFIG_BACKLIGHT_ARCXCNN=m -# CONFIG_VGASTATE is not set -CONFIG_HDMI=y - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 -# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_DUMMY_CONSOLE_COLUMNS=80 -CONFIG_DUMMY_CONSOLE_ROWS=25 -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_SOUND=m -CONFIG_SOUND_OSS_CORE=y -CONFIG_SOUND_OSS_CORE_PRECLAIM=y -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_PCM_ELD=y -CONFIG_SND_PCM_IEC958=y -CONFIG_SND_DMAENGINE_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_SEQ_DEVICE=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_COMPRESS_OFFLOAD=m -CONFIG_SND_JACK=y -CONFIG_SND_JACK_INPUT_DEV=y -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_PCM_TIMER=y -CONFIG_SND_HRTIMER=m -CONFIG_SND_DYNAMIC_MINORS=y -CONFIG_SND_MAX_CARDS=32 -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_PROC_FS=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_DMA_SGBUF=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_SEQUENCER_OSS=m -CONFIG_SND_SEQ_HRTIMER_DEFAULT=y -CONFIG_SND_SEQ_MIDI_EVENT=m -CONFIG_SND_SEQ_MIDI=m -CONFIG_SND_SEQ_MIDI_EMUL=m -CONFIG_SND_SEQ_VIRMIDI=m -CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_OPL3_LIB_SEQ=m -# CONFIG_SND_OPL4_LIB_SEQ is not set -CONFIG_SND_VX_LIB=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_DRIVERS=y -# CONFIG_SND_PCSP is not set -CONFIG_SND_DUMMY=m -CONFIG_SND_ALOOP=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_MTPAV=m -CONFIG_SND_MTS64=m -CONFIG_SND_SERIAL_U16550=m -CONFIG_SND_MPU401=m -CONFIG_SND_PORTMAN2X4=m -CONFIG_SND_AC97_POWER_SAVE=y -CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 -CONFIG_SND_SB_COMMON=m -CONFIG_SND_PCI=y -CONFIG_SND_AD1889=m -CONFIG_SND_ALS300=m -CONFIG_SND_ALS4000=m -CONFIG_SND_ALI5451=m -CONFIG_SND_ASIHPI=m -CONFIG_SND_ATIIXP=m -CONFIG_SND_ATIIXP_MODEM=m -CONFIG_SND_AU8810=m -CONFIG_SND_AU8820=m -CONFIG_SND_AU8830=m -CONFIG_SND_AW2=m -CONFIG_SND_AZT3328=m -CONFIG_SND_BT87X=m -CONFIG_SND_BT87X_OVERCLOCK=y -CONFIG_SND_CA0106=m -CONFIG_SND_CMIPCI=m -CONFIG_SND_OXYGEN_LIB=m -CONFIG_SND_OXYGEN=m -CONFIG_SND_CS4281=m -CONFIG_SND_CS46XX=m -CONFIG_SND_CS46XX_NEW_DSP=y -CONFIG_SND_CTXFI=m -CONFIG_SND_DARLA20=m -CONFIG_SND_GINA20=m -CONFIG_SND_LAYLA20=m -CONFIG_SND_DARLA24=m -CONFIG_SND_GINA24=m -CONFIG_SND_LAYLA24=m -CONFIG_SND_MONA=m -CONFIG_SND_MIA=m -CONFIG_SND_ECHO3G=m -CONFIG_SND_INDIGO=m -CONFIG_SND_INDIGOIO=m -CONFIG_SND_INDIGODJ=m -CONFIG_SND_INDIGOIOX=m -CONFIG_SND_INDIGODJX=m -CONFIG_SND_EMU10K1=m -CONFIG_SND_EMU10K1_SEQ=m -CONFIG_SND_EMU10K1X=m -CONFIG_SND_ENS1370=m -CONFIG_SND_ENS1371=m -CONFIG_SND_ES1938=m -CONFIG_SND_ES1968=m -CONFIG_SND_ES1968_INPUT=y -CONFIG_SND_ES1968_RADIO=y -CONFIG_SND_FM801=m -CONFIG_SND_FM801_TEA575X_BOOL=y -CONFIG_SND_HDSP=m -CONFIG_SND_HDSPM=m -CONFIG_SND_ICE1712=m -CONFIG_SND_ICE1724=m -CONFIG_SND_INTEL8X0=m -CONFIG_SND_INTEL8X0M=m -CONFIG_SND_KORG1212=m -CONFIG_SND_LOLA=m -CONFIG_SND_LX6464ES=m -CONFIG_SND_MAESTRO3=m -CONFIG_SND_MAESTRO3_INPUT=y -CONFIG_SND_MIXART=m -CONFIG_SND_NM256=m -CONFIG_SND_PCXHR=m -CONFIG_SND_RIPTIDE=m -CONFIG_SND_RME32=m -CONFIG_SND_RME96=m -CONFIG_SND_RME9652=m -CONFIG_SND_SONICVIBES=m -CONFIG_SND_TRIDENT=m -CONFIG_SND_VIA82XX=m -CONFIG_SND_VIA82XX_MODEM=m -CONFIG_SND_VIRTUOSO=m -CONFIG_SND_VX222=m -CONFIG_SND_YMFPCI=m - -# -# HD-Audio -# -CONFIG_SND_HDA=m -CONFIG_SND_HDA_INTEL=m -CONFIG_SND_HDA_HWDEP=y -CONFIG_SND_HDA_RECONFIG=y -CONFIG_SND_HDA_INPUT_BEEP=y -CONFIG_SND_HDA_INPUT_BEEP_MODE=1 -CONFIG_SND_HDA_PATCH_LOADER=y -CONFIG_SND_HDA_CODEC_REALTEK=m -CONFIG_SND_HDA_CODEC_ANALOG=m -CONFIG_SND_HDA_CODEC_SIGMATEL=m -CONFIG_SND_HDA_CODEC_VIA=m -CONFIG_SND_HDA_CODEC_HDMI=m -CONFIG_SND_HDA_CODEC_CIRRUS=m -CONFIG_SND_HDA_CODEC_CONEXANT=m -CONFIG_SND_HDA_CODEC_CA0110=m -CONFIG_SND_HDA_CODEC_CA0132=m -CONFIG_SND_HDA_CODEC_CA0132_DSP=y -CONFIG_SND_HDA_CODEC_CMEDIA=m -CONFIG_SND_HDA_CODEC_SI3054=m -CONFIG_SND_HDA_GENERIC=m -CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 -CONFIG_SND_HDA_CORE=m -CONFIG_SND_HDA_DSP_LOADER=y -CONFIG_SND_HDA_I915=y -CONFIG_SND_HDA_EXT_CORE=m -CONFIG_SND_HDA_PREALLOC_SIZE=64 -CONFIG_SND_SPI=y -CONFIG_SND_USB=y -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_UA101=m -CONFIG_SND_USB_USX2Y=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_USB_US122L=m -CONFIG_SND_USB_6FIRE=m -CONFIG_SND_USB_HIFACE=m -CONFIG_SND_BCD2000=m -CONFIG_SND_USB_LINE6=m -CONFIG_SND_USB_POD=m -CONFIG_SND_USB_PODHD=m -CONFIG_SND_USB_TONEPORT=m -CONFIG_SND_USB_VARIAX=m -CONFIG_SND_FIREWIRE=y -CONFIG_SND_FIREWIRE_LIB=m -CONFIG_SND_DICE=m -CONFIG_SND_OXFW=m -CONFIG_SND_ISIGHT=m -CONFIG_SND_FIREWORKS=m -CONFIG_SND_BEBOB=m -CONFIG_SND_FIREWIRE_DIGI00X=m -CONFIG_SND_FIREWIRE_TASCAM=m -CONFIG_SND_FIREWIRE_MOTU=m -CONFIG_SND_FIREFACE=m -CONFIG_SND_PCMCIA=y -CONFIG_SND_VXPOCKET=m -CONFIG_SND_PDAUDIOCF=m -CONFIG_SND_SOC=m -CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y -CONFIG_SND_SOC_COMPRESS=y -CONFIG_SND_SOC_TOPOLOGY=y -CONFIG_SND_SOC_AMD_ACP=m -CONFIG_SND_ATMEL_SOC=m -CONFIG_SND_DESIGNWARE_I2S=m -CONFIG_SND_DESIGNWARE_PCM=y - -# -# SoC Audio for Freescale CPUs -# - -# -# Common SoC Audio options for Freescale CPUs: -# -CONFIG_SND_SOC_FSL_ASRC=m -CONFIG_SND_SOC_FSL_SAI=m -CONFIG_SND_SOC_FSL_SSI=m -CONFIG_SND_SOC_FSL_SPDIF=m -CONFIG_SND_SOC_FSL_ESAI=m -CONFIG_SND_SOC_IMX_AUDMUX=m -CONFIG_SND_I2S_HI6210_I2S=m -CONFIG_SND_SOC_IMG=y -CONFIG_SND_SOC_IMG_I2S_IN=m -CONFIG_SND_SOC_IMG_I2S_OUT=m -CONFIG_SND_SOC_IMG_PARALLEL_OUT=m -CONFIG_SND_SOC_IMG_SPDIF_IN=m -CONFIG_SND_SOC_IMG_SPDIF_OUT=m -CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=m -CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m -CONFIG_SND_SST_IPC=m -CONFIG_SND_SST_IPC_ACPI=m -CONFIG_SND_SOC_INTEL_SST=m -CONFIG_SND_SOC_INTEL_SST_FIRMWARE=m -CONFIG_SND_SOC_INTEL_SST_ACPI=m -CONFIG_SND_SOC_INTEL_SST_MATCH=m -CONFIG_SND_SOC_INTEL_HASWELL=m -CONFIG_SND_SOC_INTEL_HASWELL_MACH=m -CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m -CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=m -CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m -CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m -CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m -CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m -CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=m -CONFIG_SND_SOC_INTEL_SKYLAKE=m -CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m -CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m -CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m - -# -# STMicroelectronics STM32 SOC audio support -# -CONFIG_SND_SOC_XTFPGA_I2S=m -CONFIG_ZX_TDM=m -CONFIG_SND_SOC_I2C_AND_SPI=m - -# -# CODEC drivers -# -# CONFIG_SND_SOC_AC97_CODEC is not set -CONFIG_SND_SOC_ADAU_UTILS=m -CONFIG_SND_SOC_ADAU1701=m -CONFIG_SND_SOC_ADAU17X1=m -CONFIG_SND_SOC_ADAU1761=m -CONFIG_SND_SOC_ADAU1761_I2C=m -CONFIG_SND_SOC_ADAU1761_SPI=m -CONFIG_SND_SOC_ADAU7002=m -CONFIG_SND_SOC_AK4104=m -CONFIG_SND_SOC_AK4554=m -CONFIG_SND_SOC_AK4613=m -CONFIG_SND_SOC_AK4642=m -CONFIG_SND_SOC_AK5386=m -CONFIG_SND_SOC_ALC5623=m -# CONFIG_SND_SOC_BT_SCO is not set -CONFIG_SND_SOC_CS35L32=m -CONFIG_SND_SOC_CS35L33=m -CONFIG_SND_SOC_CS35L34=m -CONFIG_SND_SOC_CS35L35=m -CONFIG_SND_SOC_CS42L42=m -CONFIG_SND_SOC_CS42L51=m -CONFIG_SND_SOC_CS42L51_I2C=m -CONFIG_SND_SOC_CS42L52=m -CONFIG_SND_SOC_CS42L56=m -CONFIG_SND_SOC_CS42L73=m -CONFIG_SND_SOC_CS4265=m -CONFIG_SND_SOC_CS4270=m -CONFIG_SND_SOC_CS4271=m -CONFIG_SND_SOC_CS4271_I2C=m -CONFIG_SND_SOC_CS4271_SPI=m -CONFIG_SND_SOC_CS42XX8=m -CONFIG_SND_SOC_CS42XX8_I2C=m -CONFIG_SND_SOC_CS43130=m -CONFIG_SND_SOC_CS4349=m -CONFIG_SND_SOC_CS53L30=m -CONFIG_SND_SOC_DA7213=m -CONFIG_SND_SOC_DA7219=m -CONFIG_SND_SOC_DIO2125=m -CONFIG_SND_SOC_DMIC=m -CONFIG_SND_SOC_HDMI_CODEC=m -CONFIG_SND_SOC_ES7134=m -CONFIG_SND_SOC_ES8316=m -CONFIG_SND_SOC_ES8328=m -CONFIG_SND_SOC_ES8328_I2C=m -CONFIG_SND_SOC_ES8328_SPI=m -CONFIG_SND_SOC_GTM601=m -CONFIG_SND_SOC_HDAC_HDMI=m -CONFIG_SND_SOC_INNO_RK3036=m -CONFIG_SND_SOC_MAX98090=m -CONFIG_SND_SOC_MAX98357A=m -CONFIG_SND_SOC_MAX98504=m -CONFIG_SND_SOC_MAX98927=m -CONFIG_SND_SOC_MAX9860=m -CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m -CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m -CONFIG_SND_SOC_PCM1681=m -CONFIG_SND_SOC_PCM179X=m -CONFIG_SND_SOC_PCM179X_I2C=m -CONFIG_SND_SOC_PCM179X_SPI=m -CONFIG_SND_SOC_PCM3168A=m -CONFIG_SND_SOC_PCM3168A_I2C=m -CONFIG_SND_SOC_PCM3168A_SPI=m -CONFIG_SND_SOC_PCM512x=m -CONFIG_SND_SOC_PCM512x_I2C=m -CONFIG_SND_SOC_PCM512x_SPI=m -CONFIG_SND_SOC_RL6231=m -CONFIG_SND_SOC_RL6347A=m -CONFIG_SND_SOC_RT286=m -CONFIG_SND_SOC_RT298=m -CONFIG_SND_SOC_RT5514=m -CONFIG_SND_SOC_RT5514_SPI=m -CONFIG_SND_SOC_RT5616=m -CONFIG_SND_SOC_RT5631=m -CONFIG_SND_SOC_RT5640=m -CONFIG_SND_SOC_RT5645=m -CONFIG_SND_SOC_RT5651=m -CONFIG_SND_SOC_RT5663=m -CONFIG_SND_SOC_RT5670=m -CONFIG_SND_SOC_RT5677=m -CONFIG_SND_SOC_RT5677_SPI=m -CONFIG_SND_SOC_SGTL5000=m -CONFIG_SND_SOC_SI476X=m -CONFIG_SND_SOC_SIGMADSP=m -CONFIG_SND_SOC_SIGMADSP_I2C=m -CONFIG_SND_SOC_SIGMADSP_REGMAP=m -CONFIG_SND_SOC_SIRF_AUDIO_CODEC=m -CONFIG_SND_SOC_SPDIF=m -CONFIG_SND_SOC_SSM2602=m -CONFIG_SND_SOC_SSM2602_SPI=m -CONFIG_SND_SOC_SSM2602_I2C=m -CONFIG_SND_SOC_SSM4567=m -CONFIG_SND_SOC_STA32X=m -CONFIG_SND_SOC_STA350=m -CONFIG_SND_SOC_STI_SAS=m -CONFIG_SND_SOC_TAS2552=m -CONFIG_SND_SOC_TAS5086=m -CONFIG_SND_SOC_TAS571X=m -CONFIG_SND_SOC_TAS5720=m -CONFIG_SND_SOC_TFA9879=m -CONFIG_SND_SOC_TLV320AIC23=m -CONFIG_SND_SOC_TLV320AIC23_I2C=m -CONFIG_SND_SOC_TLV320AIC23_SPI=m -CONFIG_SND_SOC_TLV320AIC31XX=m -CONFIG_SND_SOC_TLV320AIC3X=m -CONFIG_SND_SOC_TS3A227E=m -CONFIG_SND_SOC_WM8510=m -CONFIG_SND_SOC_WM8523=m -CONFIG_SND_SOC_WM8524=m -CONFIG_SND_SOC_WM8580=m -CONFIG_SND_SOC_WM8711=m -CONFIG_SND_SOC_WM8728=m -CONFIG_SND_SOC_WM8731=m -CONFIG_SND_SOC_WM8737=m -CONFIG_SND_SOC_WM8741=m -CONFIG_SND_SOC_WM8750=m -CONFIG_SND_SOC_WM8753=m -CONFIG_SND_SOC_WM8770=m -CONFIG_SND_SOC_WM8776=m -CONFIG_SND_SOC_WM8804=m -CONFIG_SND_SOC_WM8804_I2C=m -CONFIG_SND_SOC_WM8804_SPI=m -CONFIG_SND_SOC_WM8903=m -CONFIG_SND_SOC_WM8960=m -CONFIG_SND_SOC_WM8962=m -CONFIG_SND_SOC_WM8974=m -CONFIG_SND_SOC_WM8978=m -CONFIG_SND_SOC_WM8985=m -CONFIG_SND_SOC_ZX_AUD96P22=m -CONFIG_SND_SOC_NAU8540=m -CONFIG_SND_SOC_NAU8810=m -CONFIG_SND_SOC_NAU8824=m -CONFIG_SND_SOC_NAU8825=m -CONFIG_SND_SOC_TPA6130A2=m -CONFIG_SND_SIMPLE_CARD_UTILS=m -CONFIG_SND_SIMPLE_CARD=m -CONFIG_SND_X86=y -CONFIG_HDMI_LPE_AUDIO=m -CONFIG_SND_SYNTH_EMUX=m -CONFIG_AC97_BUS=m - -# -# HID support -# -CONFIG_HID=m -CONFIG_HID_BATTERY_STRENGTH=y -CONFIG_HIDRAW=y -CONFIG_UHID=m -CONFIG_HID_GENERIC=m - -# -# Special HID drivers -# -CONFIG_HID_A4TECH=m -CONFIG_HID_ACCUTOUCH=m -CONFIG_HID_ACRUX=m -CONFIG_HID_ACRUX_FF=y -CONFIG_HID_APPLE=m -CONFIG_HID_APPLEIR=m -CONFIG_HID_ASUS=m -CONFIG_HID_AUREAL=m -CONFIG_HID_BELKIN=m -CONFIG_HID_BETOP_FF=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CORSAIR=m -CONFIG_HID_PRODIKEYS=m -CONFIG_HID_CMEDIA=m -CONFIG_HID_CP2112=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_DRAGONRISE=m -CONFIG_DRAGONRISE_FF=y -CONFIG_HID_EMS_FF=m -CONFIG_HID_ELECOM=m -CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GEMBIRD=m -CONFIG_HID_GFRM=m -CONFIG_HID_HOLTEK=m -CONFIG_HOLTEK_FF=y -CONFIG_HID_GT683R=m -CONFIG_HID_KEYTOUCH=m -CONFIG_HID_KYE=m -CONFIG_HID_UCLOGIC=m -CONFIG_HID_WALTOP=m -CONFIG_HID_GYRATION=m -CONFIG_HID_ICADE=m -CONFIG_HID_ITE=m -CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=m -CONFIG_HID_LCPOWER=m -CONFIG_HID_LED=m -CONFIG_HID_LENOVO=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_LOGITECH_DJ=m -CONFIG_HID_LOGITECH_HIDPP=m -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_LOGIG940_FF=y -CONFIG_LOGIWHEELS_FF=y -CONFIG_HID_MAGICMOUSE=m -CONFIG_HID_MAYFLASH=m -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_MULTITOUCH=m -CONFIG_HID_NTI=m -CONFIG_HID_NTRIG=m -CONFIG_HID_ORTEK=m -CONFIG_HID_PANTHERLORD=m -CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PENMOUNT=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_PICOLCD=m -CONFIG_HID_PICOLCD_FB=y -CONFIG_HID_PICOLCD_BACKLIGHT=y -CONFIG_HID_PICOLCD_LCD=y -CONFIG_HID_PICOLCD_LEDS=y -CONFIG_HID_PICOLCD_CIR=y -CONFIG_HID_PLANTRONICS=m -CONFIG_HID_PRIMAX=m -CONFIG_HID_RETRODE=m -CONFIG_HID_ROCCAT=m -CONFIG_HID_SAITEK=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_SONY_FF=y -CONFIG_HID_SPEEDLINK=m -CONFIG_HID_STEELSERIES=m -CONFIG_HID_SUNPLUS=m -CONFIG_HID_RMI=m -CONFIG_HID_GREENASIA=m -CONFIG_GREENASIA_FF=y -CONFIG_HID_HYPERV_MOUSE=m -CONFIG_HID_SMARTJOYPLUS=m -CONFIG_SMARTJOYPLUS_FF=y -CONFIG_HID_TIVO=m -CONFIG_HID_TOPSEED=m -CONFIG_HID_THINGM=m -CONFIG_HID_THRUSTMASTER=m -CONFIG_THRUSTMASTER_FF=y -CONFIG_HID_UDRAW_PS3=m -CONFIG_HID_WACOM=m -CONFIG_HID_WIIMOTE=m -CONFIG_HID_XINMO=m -CONFIG_HID_ZEROPLUS=m -CONFIG_ZEROPLUS_FF=y -CONFIG_HID_ZYDACRON=m -CONFIG_HID_SENSOR_HUB=m -CONFIG_HID_SENSOR_CUSTOM_SENSOR=m -CONFIG_HID_ALPS=m - -# -# USB HID support -# -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y - -# -# I2C HID support -# -CONFIG_I2C_HID=m - -# -# Intel ISH HID support -# -CONFIG_INTEL_ISH_HID=m -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB=m -CONFIG_USB_PCI=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y - -# -# Miscellaneous USB options -# -CONFIG_USB_DEFAULT_PERSIST=y -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_OTG=y -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_OTG_FSM=m -CONFIG_USB_LEDS_TRIGGER_USBPORT=m -CONFIG_USB_MON=m -CONFIG_USB_WUSB=m -CONFIG_USB_WUSB_CBAF=m -# CONFIG_USB_WUSB_CBAF_DEBUG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_C67X00_HCD=m -CONFIG_USB_XHCI_HCD=m -CONFIG_USB_XHCI_PCI=m -CONFIG_USB_XHCI_PLATFORM=m -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_EHCI_PCI=m -CONFIG_USB_EHCI_HCD_PLATFORM=m -CONFIG_USB_OXU210HP_HCD=m -CONFIG_USB_ISP116X_HCD=m -CONFIG_USB_ISP1362_HCD=m -CONFIG_USB_FOTG210_HCD=m -CONFIG_USB_MAX3421_HCD=m -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_OHCI_HCD_PCI=m -CONFIG_USB_OHCI_HCD_SSB=y -CONFIG_USB_OHCI_HCD_PLATFORM=m -CONFIG_USB_UHCI_HCD=m -CONFIG_USB_U132_HCD=m -CONFIG_USB_SL811_HCD=m -# CONFIG_USB_SL811_HCD_ISO is not set -CONFIG_USB_SL811_CS=m -CONFIG_USB_R8A66597_HCD=m -CONFIG_USB_WHCI_HCD=m -CONFIG_USB_HWA_HCD=m -CONFIG_USB_HCD_BCMA=m -CONFIG_USB_HCD_SSB=m -# CONFIG_USB_HCD_TEST_MODE is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_TMC=m - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_REALTEK=m -CONFIG_REALTEK_AUTOPM=y -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_ONETOUCH=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_STORAGE_CYPRESS_ATACB=m -CONFIG_USB_STORAGE_ENE_UB6250=m -CONFIG_USB_UAS=m - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USBIP_CORE=m -CONFIG_USBIP_VHCI_HCD=m -CONFIG_USBIP_VHCI_HC_PORTS=8 -CONFIG_USBIP_VHCI_NR_HCS=1 -CONFIG_USBIP_HOST=m -CONFIG_USBIP_VUDC=m -# CONFIG_USBIP_DEBUG is not set -CONFIG_USB_MUSB_HDRC=m -# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y - -# -# Platform Glue Layer -# - -# -# MUSB DMA mode -# -CONFIG_MUSB_PIO_ONLY=y -CONFIG_USB_DWC3=m -# CONFIG_USB_DWC3_ULPI is not set -# CONFIG_USB_DWC3_HOST is not set -# CONFIG_USB_DWC3_GADGET is not set -CONFIG_USB_DWC3_DUAL_ROLE=y - -# -# Platform Glue Driver Support -# -CONFIG_USB_DWC3_PCI=m -CONFIG_USB_DWC2=m -# CONFIG_USB_DWC2_HOST is not set - -# -# Gadget/Dual-role mode requires USB Gadget support to be enabled -# -# CONFIG_USB_DWC2_PERIPHERAL is not set -CONFIG_USB_DWC2_DUAL_ROLE=y -CONFIG_USB_DWC2_PCI=m -# CONFIG_USB_DWC2_DEBUG is not set -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set -CONFIG_USB_CHIPIDEA=m -CONFIG_USB_CHIPIDEA_PCI=m -CONFIG_USB_CHIPIDEA_UDC=y -CONFIG_USB_CHIPIDEA_HOST=y -# CONFIG_USB_CHIPIDEA_ULPI is not set -CONFIG_USB_ISP1760=m -CONFIG_USB_ISP1760_HCD=y -CONFIG_USB_ISP1761_UDC=y -# CONFIG_USB_ISP1760_HOST_ROLE is not set -# CONFIG_USB_ISP1760_GADGET_ROLE is not set -CONFIG_USB_ISP1760_DUAL_ROLE=y - -# -# USB port drivers -# -CONFIG_USB_USS720=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_SIMPLE=m -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_CH341=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP210X=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_F81232=m -CONFIG_USB_SERIAL_F8153X=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_IUU=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_METRO=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7715_PARPORT=y -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MXUPORT=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_QCAUX=m -CONFIG_USB_SERIAL_QUALCOMM=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_SAFE=m -CONFIG_USB_SERIAL_SAFE_PADDED=y -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_SYMBOL=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_WWAN=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_SERIAL_OPTICON=m -CONFIG_USB_SERIAL_XSENS_MT=m -CONFIG_USB_SERIAL_WISHBONE=m -CONFIG_USB_SERIAL_SSU100=m -CONFIG_USB_SERIAL_QT2=m -# CONFIG_USB_SERIAL_UPD78F0730 is not set -# CONFIG_USB_SERIAL_DEBUG is not set - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_SEVSEG=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_CYPRESS_CY7C63=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_FTDI_ELAN=m -CONFIG_USB_APPLEDISPLAY=m -CONFIG_USB_SISUSBVGA=m -CONFIG_USB_SISUSBVGA_CON=y -CONFIG_USB_LD=m -CONFIG_USB_TRANCEVIBRATOR=m -CONFIG_USB_IOWARRIOR=m -CONFIG_USB_TEST=m -CONFIG_USB_EHSET_TEST_FIXTURE=m -CONFIG_USB_ISIGHTFW=m -CONFIG_USB_YUREX=m -CONFIG_USB_EZUSB_FX2=m -CONFIG_USB_HUB_USB251XB=m -CONFIG_USB_HSIC_USB3503=m -CONFIG_USB_HSIC_USB4604=m -CONFIG_USB_LINK_LAYER_TEST=m -CONFIG_USB_CHAOSKEY=m -CONFIG_USB_ATM=m -CONFIG_USB_SPEEDTOUCH=m -CONFIG_USB_CXACRU=m -CONFIG_USB_UEAGLEATM=m -CONFIG_USB_XUSBATM=m - -# -# USB Physical Layer drivers -# -CONFIG_USB_PHY=y -CONFIG_NOP_USB_XCEIV=m -CONFIG_USB_GPIO_VBUS=m -CONFIG_TAHVO_USB=m -CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y -CONFIG_USB_ISP1301=m -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_VBUS_DRAW=2 -CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 -CONFIG_U_SERIAL_CONSOLE=y - -# -# USB Peripheral Controller -# -CONFIG_USB_FOTG210_UDC=m -CONFIG_USB_GR_UDC=m -CONFIG_USB_R8A66597=m -CONFIG_USB_PXA27X=m -CONFIG_USB_MV_UDC=m -CONFIG_USB_MV_U3D=m -CONFIG_USB_SNP_CORE=m -CONFIG_USB_M66592=m -CONFIG_USB_BDC_UDC=m - -# -# Platform Support -# -CONFIG_USB_BDC_PCI=m -CONFIG_USB_AMD5536UDC=m -CONFIG_USB_NET2272=m -CONFIG_USB_NET2272_DMA=y -CONFIG_USB_NET2280=m -CONFIG_USB_GOKU=m -CONFIG_USB_EG20T=m -# CONFIG_USB_DUMMY_HCD is not set -CONFIG_USB_LIBCOMPOSITE=m -CONFIG_USB_F_ACM=m -CONFIG_USB_F_SS_LB=m -CONFIG_USB_U_SERIAL=m -CONFIG_USB_U_ETHER=m -CONFIG_USB_U_AUDIO=m -CONFIG_USB_F_SERIAL=m -CONFIG_USB_F_OBEX=m -CONFIG_USB_F_NCM=m -CONFIG_USB_F_ECM=m -CONFIG_USB_F_PHONET=m -CONFIG_USB_F_EEM=m -CONFIG_USB_F_SUBSET=m -CONFIG_USB_F_RNDIS=m -CONFIG_USB_F_MASS_STORAGE=m -CONFIG_USB_F_FS=m -CONFIG_USB_F_UAC1=m -CONFIG_USB_F_UAC2=m -CONFIG_USB_F_UVC=m -CONFIG_USB_F_MIDI=m -CONFIG_USB_F_HID=m -CONFIG_USB_F_PRINTER=m -CONFIG_USB_F_TCM=m -CONFIG_USB_CONFIGFS=m -CONFIG_USB_CONFIGFS_SERIAL=y -CONFIG_USB_CONFIGFS_ACM=y -CONFIG_USB_CONFIGFS_OBEX=y -CONFIG_USB_CONFIGFS_NCM=y -CONFIG_USB_CONFIGFS_ECM=y -CONFIG_USB_CONFIGFS_ECM_SUBSET=y -CONFIG_USB_CONFIGFS_RNDIS=y -CONFIG_USB_CONFIGFS_EEM=y -CONFIG_USB_CONFIGFS_PHONET=y -CONFIG_USB_CONFIGFS_MASS_STORAGE=y -CONFIG_USB_CONFIGFS_F_LB_SS=y -CONFIG_USB_CONFIGFS_F_FS=y -CONFIG_USB_CONFIGFS_F_UAC1=y -# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set -CONFIG_USB_CONFIGFS_F_UAC2=y -CONFIG_USB_CONFIGFS_F_MIDI=y -CONFIG_USB_CONFIGFS_F_HID=y -CONFIG_USB_CONFIGFS_F_UVC=y -CONFIG_USB_CONFIGFS_F_PRINTER=y -CONFIG_USB_CONFIGFS_F_TCM=y -CONFIG_USB_ZERO=m -CONFIG_USB_ZERO_HNPTEST=y -CONFIG_USB_AUDIO=m -CONFIG_GADGET_UAC1=y -# CONFIG_GADGET_UAC1_LEGACY is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_ETH_EEM=y -CONFIG_USB_G_NCM=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FUNCTIONFS=m -CONFIG_USB_FUNCTIONFS_ETH=y -CONFIG_USB_FUNCTIONFS_RNDIS=y -CONFIG_USB_FUNCTIONFS_GENERIC=y -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_GADGET_TARGET=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_MIDI_GADGET=m -CONFIG_USB_G_PRINTER=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_G_NOKIA=m -CONFIG_USB_G_ACM_MS=m -CONFIG_USB_G_MULTI=m -CONFIG_USB_G_MULTI_RNDIS=y -CONFIG_USB_G_MULTI_CDC=y -CONFIG_USB_G_HID=m -# CONFIG_USB_G_DBGP is not set -CONFIG_USB_G_WEBCAM=m - -# -# USB Power Delivery and Type-C drivers -# -CONFIG_TYPEC=m -CONFIG_TYPEC_UCSI=m -CONFIG_UCSI_ACPI=m -CONFIG_USB_LED_TRIG=y -CONFIG_USB_ULPI_BUS=m -CONFIG_UWB=m -CONFIG_UWB_HWA=m -CONFIG_UWB_WHCI=m -CONFIG_UWB_I1480U=m -CONFIG_MMC=m -CONFIG_MMC_BLOCK=m -CONFIG_MMC_BLOCK_MINORS=8 -CONFIG_SDIO_UART=m -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_SDHCI=m -CONFIG_MMC_SDHCI_PCI=m -CONFIG_MMC_RICOH_MMC=y -CONFIG_MMC_SDHCI_ACPI=m -CONFIG_MMC_SDHCI_PLTFM=m -CONFIG_MMC_WBSD=m -CONFIG_MMC_TIFM_SD=m -CONFIG_MMC_SPI=m -CONFIG_MMC_SDRICOH_CS=m -CONFIG_MMC_CB710=m -CONFIG_MMC_VIA_SDMMC=m -CONFIG_MMC_VUB300=m -CONFIG_MMC_USHC=m -CONFIG_MMC_USDHI6ROL0=m -CONFIG_MMC_REALTEK_PCI=m -CONFIG_MMC_REALTEK_USB=m -CONFIG_MMC_TOSHIBA_PCI=m -CONFIG_MMC_MTK=m -CONFIG_MMC_SDHCI_XENON=m -CONFIG_MEMSTICK=m -# CONFIG_MEMSTICK_DEBUG is not set - -# -# MemoryStick drivers -# -# CONFIG_MEMSTICK_UNSAFE_RESUME is not set -CONFIG_MSPRO_BLOCK=m -CONFIG_MS_BLOCK=m - -# -# MemoryStick Host Controller Drivers -# -CONFIG_MEMSTICK_TIFM_MS=m -CONFIG_MEMSTICK_JMICRON_38X=m -CONFIG_MEMSTICK_R592=m -CONFIG_MEMSTICK_REALTEK_PCI=m -CONFIG_MEMSTICK_REALTEK_USB=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_CLASS_FLASH=m -# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set - -# -# LED drivers -# -CONFIG_LEDS_AS3645A=m -CONFIG_LEDS_LM3530=m -CONFIG_LEDS_LM3533=m -CONFIG_LEDS_LM3642=m -CONFIG_LEDS_MT6323=m -CONFIG_LEDS_PCA9532=m -CONFIG_LEDS_PCA9532_GPIO=y -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_LP3944=m -CONFIG_LEDS_LP3952=m -CONFIG_LEDS_LP55XX_COMMON=m -CONFIG_LEDS_LP5521=m -CONFIG_LEDS_LP5523=m -CONFIG_LEDS_LP5562=m -CONFIG_LEDS_LP8501=m -CONFIG_LEDS_LP8860=m -CONFIG_LEDS_CLEVO_MAIL=m -CONFIG_LEDS_PCA955X=m -# CONFIG_LEDS_PCA955X_GPIO is not set -CONFIG_LEDS_PCA963X=m -CONFIG_LEDS_WM831X_STATUS=m -CONFIG_LEDS_DA9052=m -CONFIG_LEDS_DAC124S085=m -CONFIG_LEDS_PWM=m -CONFIG_LEDS_REGULATOR=m -CONFIG_LEDS_BD2802=m -CONFIG_LEDS_INTEL_SS4200=m -CONFIG_LEDS_LT3593=m -CONFIG_LEDS_MC13783=m -CONFIG_LEDS_TCA6507=m -CONFIG_LEDS_TLC591XX=m -CONFIG_LEDS_LM355x=m -CONFIG_LEDS_MENF21BMC=m - -# -# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) -# -CONFIG_LEDS_BLINKM=m -CONFIG_LEDS_MLXCPLD=m -CONFIG_LEDS_USER=m -CONFIG_LEDS_NIC78BX=m - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_ONESHOT=m -CONFIG_LEDS_TRIGGER_DISK=y -# CONFIG_LEDS_TRIGGER_MTD is not set -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_LEDS_TRIGGER_BACKLIGHT=m -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_GPIO=m -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m - -# -# iptables trigger is under Netfilter config (LED target) -# -CONFIG_LEDS_TRIGGER_TRANSIENT=m -CONFIG_LEDS_TRIGGER_CAMERA=m -CONFIG_LEDS_TRIGGER_PANIC=y -CONFIG_ACCESSIBILITY=y -CONFIG_A11Y_BRAILLE_CONSOLE=y -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_USER_MAD=m -CONFIG_INFINIBAND_USER_ACCESS=m -# CONFIG_INFINIBAND_EXP_USER_ACCESS is not set -CONFIG_INFINIBAND_USER_MEM=y -CONFIG_INFINIBAND_ON_DEMAND_PAGING=y -CONFIG_INFINIBAND_ADDR_TRANS=y -CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y -CONFIG_INFINIBAND_MTHCA=m -CONFIG_INFINIBAND_MTHCA_DEBUG=y -CONFIG_INFINIBAND_QIB=m -CONFIG_INFINIBAND_QIB_DCA=y -CONFIG_INFINIBAND_CXGB3=m -# CONFIG_INFINIBAND_CXGB3_DEBUG is not set -CONFIG_INFINIBAND_CXGB4=m -CONFIG_INFINIBAND_I40IW=m -CONFIG_MLX4_INFINIBAND=m -CONFIG_MLX5_INFINIBAND=m -CONFIG_INFINIBAND_NES=m -# CONFIG_INFINIBAND_NES_DEBUG is not set -CONFIG_INFINIBAND_OCRDMA=m -CONFIG_INFINIBAND_VMWARE_PVRDMA=m -CONFIG_INFINIBAND_USNIC=m -CONFIG_INFINIBAND_IPOIB=m -CONFIG_INFINIBAND_IPOIB_CM=y -CONFIG_INFINIBAND_IPOIB_DEBUG=y -# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set -CONFIG_INFINIBAND_SRP=m -CONFIG_INFINIBAND_SRPT=m -CONFIG_INFINIBAND_ISER=m -CONFIG_INFINIBAND_ISERT=m -CONFIG_INFINIBAND_OPA_VNIC=m -CONFIG_INFINIBAND_RDMAVT=m -CONFIG_RDMA_RXE=m -CONFIG_INFINIBAND_HFI1=m -# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set -# CONFIG_SDMA_VERBOSITY is not set -CONFIG_INFINIBAND_QEDR=m -CONFIG_INFINIBAND_BNXT_RE=m -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EDAC=y -CONFIG_EDAC_LEGACY_SYSFS=y -# CONFIG_EDAC_DEBUG is not set -CONFIG_EDAC_DECODE_MCE=m -CONFIG_EDAC_GHES=y -CONFIG_EDAC_AMD64=m -CONFIG_EDAC_AMD64_ERROR_INJECTION=y -CONFIG_EDAC_E752X=m -CONFIG_EDAC_I82975X=m -CONFIG_EDAC_I3000=m -CONFIG_EDAC_I3200=m -CONFIG_EDAC_IE31200=m -CONFIG_EDAC_X38=m -CONFIG_EDAC_I5400=m -CONFIG_EDAC_I7CORE=m -CONFIG_EDAC_I5000=m -CONFIG_EDAC_I5100=m -CONFIG_EDAC_I7300=m -CONFIG_EDAC_SBRIDGE=m -CONFIG_EDAC_SKX=m -CONFIG_EDAC_PND2=m -CONFIG_RTC_LIB=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -CONFIG_RTC_SYSTOHC=y -CONFIG_RTC_SYSTOHC_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set -CONFIG_RTC_NVMEM=y - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -CONFIG_RTC_DRV_88PM80X=m -CONFIG_RTC_DRV_ABB5ZES3=m -CONFIG_RTC_DRV_ABX80X=m -CONFIG_RTC_DRV_DS1307=m -CONFIG_RTC_DRV_DS1307_HWMON=y -# CONFIG_RTC_DRV_DS1307_CENTURY is not set -CONFIG_RTC_DRV_DS1374=m -CONFIG_RTC_DRV_DS1374_WDT=y -CONFIG_RTC_DRV_DS1672=m -CONFIG_RTC_DRV_MAX6900=m -CONFIG_RTC_DRV_MAX8907=m -CONFIG_RTC_DRV_RS5C372=m -CONFIG_RTC_DRV_ISL1208=m -CONFIG_RTC_DRV_ISL12022=m -CONFIG_RTC_DRV_X1205=m -CONFIG_RTC_DRV_PCF8523=m -CONFIG_RTC_DRV_PCF85063=m -CONFIG_RTC_DRV_PCF8563=m -CONFIG_RTC_DRV_PCF8583=m -CONFIG_RTC_DRV_M41T80=m -CONFIG_RTC_DRV_M41T80_WDT=y -CONFIG_RTC_DRV_BQ32K=m -CONFIG_RTC_DRV_S35390A=m -CONFIG_RTC_DRV_FM3130=m -CONFIG_RTC_DRV_RX8010=m -CONFIG_RTC_DRV_RX8581=m -CONFIG_RTC_DRV_RX8025=m -CONFIG_RTC_DRV_EM3027=m -CONFIG_RTC_DRV_RV8803=m - -# -# SPI RTC drivers -# -CONFIG_RTC_DRV_M41T93=m -CONFIG_RTC_DRV_M41T94=m -CONFIG_RTC_DRV_DS1302=m -CONFIG_RTC_DRV_DS1305=m -CONFIG_RTC_DRV_DS1343=m -CONFIG_RTC_DRV_DS1347=m -CONFIG_RTC_DRV_DS1390=m -CONFIG_RTC_DRV_MAX6916=m -CONFIG_RTC_DRV_R9701=m -CONFIG_RTC_DRV_RX4581=m -CONFIG_RTC_DRV_RX6110=m -CONFIG_RTC_DRV_RS5C348=m -CONFIG_RTC_DRV_MAX6902=m -CONFIG_RTC_DRV_PCF2123=m -CONFIG_RTC_DRV_MCP795=m -CONFIG_RTC_I2C_AND_SPI=m - -# -# SPI and I2C RTC drivers -# -CONFIG_RTC_DRV_DS3232=m -CONFIG_RTC_DRV_DS3232_HWMON=y -CONFIG_RTC_DRV_PCF2127=m -CONFIG_RTC_DRV_RV3029C2=m -CONFIG_RTC_DRV_RV3029_HWMON=y - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -CONFIG_RTC_DRV_DS1286=m -CONFIG_RTC_DRV_DS1511=m -CONFIG_RTC_DRV_DS1553=m -CONFIG_RTC_DRV_DS1685_FAMILY=m -CONFIG_RTC_DRV_DS1685=y -# CONFIG_RTC_DRV_DS1689 is not set -# CONFIG_RTC_DRV_DS17285 is not set -# CONFIG_RTC_DRV_DS17485 is not set -# CONFIG_RTC_DRV_DS17885 is not set -CONFIG_RTC_DS1685_PROC_REGS=y -CONFIG_RTC_DS1685_SYSFS_REGS=y -CONFIG_RTC_DRV_DS1742=m -CONFIG_RTC_DRV_DS2404=m -CONFIG_RTC_DRV_DA9052=m -CONFIG_RTC_DRV_DA9063=m -CONFIG_RTC_DRV_STK17TA8=m -CONFIG_RTC_DRV_M48T86=m -CONFIG_RTC_DRV_M48T35=m -CONFIG_RTC_DRV_M48T59=m -CONFIG_RTC_DRV_MSM6242=m -CONFIG_RTC_DRV_BQ4802=m -CONFIG_RTC_DRV_RP5C01=m -CONFIG_RTC_DRV_V3020=m -CONFIG_RTC_DRV_WM831X=m -CONFIG_RTC_DRV_PCF50633=m - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_FTRTC010=m -CONFIG_RTC_DRV_PCAP=m -CONFIG_RTC_DRV_MC13XXX=m -CONFIG_RTC_DRV_MT6397=m - -# -# HID Sensor RTC drivers -# -CONFIG_RTC_DRV_HID_SENSOR_TIME=m -CONFIG_DMADEVICES=y -# CONFIG_DMADEVICES_DEBUG is not set - -# -# DMA Devices -# -CONFIG_DMA_ENGINE=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DMA_ACPI=y -CONFIG_ALTERA_MSGDMA=m -CONFIG_INTEL_IDMA64=m -CONFIG_INTEL_IOATDMA=m -CONFIG_INTEL_MIC_X100_DMA=m -CONFIG_QCOM_HIDMA_MGMT=m -CONFIG_QCOM_HIDMA=m -CONFIG_DW_DMAC_CORE=y -CONFIG_DW_DMAC=m -CONFIG_DW_DMAC_PCI=y -CONFIG_HSU_DMA=y - -# -# DMA Clients -# -CONFIG_ASYNC_TX_DMA=y -# CONFIG_DMATEST is not set -CONFIG_DMA_ENGINE_RAID=y - -# -# DMABUF options -# -CONFIG_SYNC_FILE=y -# CONFIG_SW_SYNC is not set -CONFIG_DCA=m -CONFIG_AUXDISPLAY=y -CONFIG_HD44780=m -CONFIG_KS0108=m -CONFIG_KS0108_PORT=0x378 -CONFIG_KS0108_DELAY=2 -CONFIG_CFAG12864B=m -CONFIG_CFAG12864B_RATE=20 -CONFIG_IMG_ASCII_LCD=m -CONFIG_PANEL=m -CONFIG_PANEL_PARPORT=0 -CONFIG_PANEL_PROFILE=5 -# CONFIG_PANEL_CHANGE_MESSAGE is not set -CONFIG_CHARLCD=m -CONFIG_UIO=m -CONFIG_UIO_CIF=m -CONFIG_UIO_PDRV_GENIRQ=m -CONFIG_UIO_DMEM_GENIRQ=m -CONFIG_UIO_AEC=m -CONFIG_UIO_SERCOS3=m -CONFIG_UIO_PCI_GENERIC=m -CONFIG_UIO_NETX=m -CONFIG_UIO_PRUSS=m -CONFIG_UIO_MF624=m -CONFIG_UIO_HV_GENERIC=m -CONFIG_VFIO_IOMMU_TYPE1=m -CONFIG_VFIO_VIRQFD=m -CONFIG_VFIO=m -# CONFIG_VFIO_NOIOMMU is not set -CONFIG_VFIO_PCI=m -CONFIG_VFIO_PCI_VGA=y -CONFIG_VFIO_PCI_MMAP=y -CONFIG_VFIO_PCI_INTX=y -CONFIG_VFIO_PCI_IGD=y -CONFIG_VFIO_MDEV=m -CONFIG_VFIO_MDEV_DEVICE=m -CONFIG_IRQ_BYPASS_MANAGER=m -CONFIG_VIRT_DRIVERS=y -CONFIG_VIRTIO=m - -# -# Virtio drivers -# -CONFIG_VIRTIO_PCI=m -CONFIG_VIRTIO_PCI_LEGACY=y -CONFIG_VIRTIO_BALLOON=m -CONFIG_VIRTIO_INPUT=m -CONFIG_VIRTIO_MMIO=m -CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y - -# -# Microsoft Hyper-V guest support -# -CONFIG_HYPERV=m -CONFIG_HYPERV_TSCPAGE=y -CONFIG_HYPERV_UTILS=m -CONFIG_HYPERV_BALLOON=m -CONFIG_STAGING=y -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m - -# -# Dongle support -# -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_TOIM3232_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_KINGSUN_DONGLE=m -CONFIG_KSDAZZLE_DONGLE=m -CONFIG_KS959_DONGLE=m - -# -# FIR device drivers -# -CONFIG_USB_IRDA=m -CONFIG_SIGMATEL_FIR=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m -CONFIG_VIA_FIR=m -CONFIG_MCS_FIR=m -CONFIG_PRISM2_USB=m -CONFIG_COMEDI=m -# CONFIG_COMEDI_DEBUG is not set -CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048 -CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480 -CONFIG_COMEDI_MISC_DRIVERS=y -CONFIG_COMEDI_BOND=m -CONFIG_COMEDI_TEST=m -CONFIG_COMEDI_PARPORT=m -CONFIG_COMEDI_SERIAL2002=m -CONFIG_COMEDI_ISA_DRIVERS=y -CONFIG_COMEDI_PCL711=m -CONFIG_COMEDI_PCL724=m -CONFIG_COMEDI_PCL726=m -CONFIG_COMEDI_PCL730=m -CONFIG_COMEDI_PCL812=m -CONFIG_COMEDI_PCL816=m -CONFIG_COMEDI_PCL818=m -CONFIG_COMEDI_PCM3724=m -CONFIG_COMEDI_AMPLC_DIO200_ISA=m -CONFIG_COMEDI_AMPLC_PC236_ISA=m -CONFIG_COMEDI_AMPLC_PC263_ISA=m -CONFIG_COMEDI_RTI800=m -CONFIG_COMEDI_RTI802=m -CONFIG_COMEDI_DAC02=m -CONFIG_COMEDI_DAS16M1=m -CONFIG_COMEDI_DAS08_ISA=m -CONFIG_COMEDI_DAS16=m -CONFIG_COMEDI_DAS800=m -CONFIG_COMEDI_DAS1800=m -CONFIG_COMEDI_DAS6402=m -CONFIG_COMEDI_DT2801=m -CONFIG_COMEDI_DT2811=m -CONFIG_COMEDI_DT2814=m -CONFIG_COMEDI_DT2815=m -CONFIG_COMEDI_DT2817=m -CONFIG_COMEDI_DT282X=m -CONFIG_COMEDI_DMM32AT=m -CONFIG_COMEDI_FL512=m -CONFIG_COMEDI_AIO_AIO12_8=m -CONFIG_COMEDI_AIO_IIRO_16=m -CONFIG_COMEDI_II_PCI20KC=m -CONFIG_COMEDI_C6XDIGIO=m -CONFIG_COMEDI_MPC624=m -CONFIG_COMEDI_ADQ12B=m -CONFIG_COMEDI_NI_AT_A2150=m -CONFIG_COMEDI_NI_AT_AO=m -CONFIG_COMEDI_NI_ATMIO=m -CONFIG_COMEDI_NI_ATMIO16D=m -CONFIG_COMEDI_NI_LABPC_ISA=m -CONFIG_COMEDI_PCMAD=m -CONFIG_COMEDI_PCMDA12=m -CONFIG_COMEDI_PCMMIO=m -CONFIG_COMEDI_PCMUIO=m -CONFIG_COMEDI_MULTIQ3=m -CONFIG_COMEDI_S526=m -CONFIG_COMEDI_PCI_DRIVERS=m -CONFIG_COMEDI_8255_PCI=m -CONFIG_COMEDI_ADDI_WATCHDOG=m -CONFIG_COMEDI_ADDI_APCI_1032=m -CONFIG_COMEDI_ADDI_APCI_1500=m -CONFIG_COMEDI_ADDI_APCI_1516=m -CONFIG_COMEDI_ADDI_APCI_1564=m -CONFIG_COMEDI_ADDI_APCI_16XX=m -CONFIG_COMEDI_ADDI_APCI_2032=m -CONFIG_COMEDI_ADDI_APCI_2200=m -CONFIG_COMEDI_ADDI_APCI_3120=m -CONFIG_COMEDI_ADDI_APCI_3501=m -CONFIG_COMEDI_ADDI_APCI_3XXX=m -CONFIG_COMEDI_ADL_PCI6208=m -CONFIG_COMEDI_ADL_PCI7X3X=m -CONFIG_COMEDI_ADL_PCI8164=m -CONFIG_COMEDI_ADL_PCI9111=m -CONFIG_COMEDI_ADL_PCI9118=m -CONFIG_COMEDI_ADV_PCI1710=m -CONFIG_COMEDI_ADV_PCI1720=m -CONFIG_COMEDI_ADV_PCI1723=m -CONFIG_COMEDI_ADV_PCI1724=m -CONFIG_COMEDI_ADV_PCI1760=m -CONFIG_COMEDI_ADV_PCI_DIO=m -CONFIG_COMEDI_AMPLC_DIO200_PCI=m -CONFIG_COMEDI_AMPLC_PC236_PCI=m -CONFIG_COMEDI_AMPLC_PC263_PCI=m -CONFIG_COMEDI_AMPLC_PCI224=m -CONFIG_COMEDI_AMPLC_PCI230=m -CONFIG_COMEDI_CONTEC_PCI_DIO=m -CONFIG_COMEDI_DAS08_PCI=m -CONFIG_COMEDI_DT3000=m -CONFIG_COMEDI_DYNA_PCI10XX=m -CONFIG_COMEDI_GSC_HPDI=m -CONFIG_COMEDI_MF6X4=m -CONFIG_COMEDI_ICP_MULTI=m -CONFIG_COMEDI_DAQBOARD2000=m -CONFIG_COMEDI_JR3_PCI=m -CONFIG_COMEDI_KE_COUNTER=m -CONFIG_COMEDI_CB_PCIDAS64=m -CONFIG_COMEDI_CB_PCIDAS=m -CONFIG_COMEDI_CB_PCIDDA=m -CONFIG_COMEDI_CB_PCIMDAS=m -CONFIG_COMEDI_CB_PCIMDDA=m -CONFIG_COMEDI_ME4000=m -CONFIG_COMEDI_ME_DAQ=m -CONFIG_COMEDI_NI_6527=m -CONFIG_COMEDI_NI_65XX=m -CONFIG_COMEDI_NI_660X=m -CONFIG_COMEDI_NI_670X=m -CONFIG_COMEDI_NI_LABPC_PCI=m -CONFIG_COMEDI_NI_PCIDIO=m -CONFIG_COMEDI_NI_PCIMIO=m -CONFIG_COMEDI_RTD520=m -CONFIG_COMEDI_S626=m -CONFIG_COMEDI_MITE=m -CONFIG_COMEDI_NI_TIOCMD=m -CONFIG_COMEDI_PCMCIA_DRIVERS=m -CONFIG_COMEDI_CB_DAS16_CS=m -CONFIG_COMEDI_DAS08_CS=m -CONFIG_COMEDI_NI_DAQ_700_CS=m -CONFIG_COMEDI_NI_DAQ_DIO24_CS=m -CONFIG_COMEDI_NI_LABPC_CS=m -CONFIG_COMEDI_NI_MIO_CS=m -CONFIG_COMEDI_QUATECH_DAQP_CS=m -CONFIG_COMEDI_USB_DRIVERS=m -CONFIG_COMEDI_DT9812=m -CONFIG_COMEDI_NI_USB6501=m -CONFIG_COMEDI_USBDUX=m -CONFIG_COMEDI_USBDUXFAST=m -CONFIG_COMEDI_USBDUXSIGMA=m -CONFIG_COMEDI_VMK80XX=m -CONFIG_COMEDI_8254=m -CONFIG_COMEDI_8255=m -CONFIG_COMEDI_8255_SA=m -CONFIG_COMEDI_KCOMEDILIB=m -CONFIG_COMEDI_AMPLC_DIO200=m -CONFIG_COMEDI_AMPLC_PC236=m -CONFIG_COMEDI_DAS08=m -CONFIG_COMEDI_ISADMA=m -CONFIG_COMEDI_NI_LABPC=m -CONFIG_COMEDI_NI_LABPC_ISADMA=m -CONFIG_COMEDI_NI_TIO=m -CONFIG_RTL8192U=m -CONFIG_RTLLIB=m -CONFIG_RTLLIB_CRYPTO_CCMP=m -CONFIG_RTLLIB_CRYPTO_TKIP=m -CONFIG_RTLLIB_CRYPTO_WEP=m -CONFIG_RTL8192E=m -CONFIG_RTL8723BS=m -CONFIG_R8712U=m -CONFIG_R8188EU=m -CONFIG_88EU_AP_MODE=y -CONFIG_R8822BE=m -CONFIG_RTLHALMAC_ST=m -CONFIG_RTLPHYDM_ST=m -CONFIG_RTLWIFI_DEBUG_ST=y -CONFIG_RTS5208=m -CONFIG_VT6655=m -CONFIG_VT6656=m - -# -# IIO staging drivers -# - -# -# Accelerometers -# -CONFIG_ADIS16201=m -CONFIG_ADIS16203=m -CONFIG_ADIS16209=m -CONFIG_ADIS16240=m - -# -# Analog to digital converters -# -CONFIG_AD7606=m -CONFIG_AD7606_IFACE_PARALLEL=m -CONFIG_AD7606_IFACE_SPI=m -CONFIG_AD7780=m -CONFIG_AD7816=m -CONFIG_AD7192=m -CONFIG_AD7280=m - -# -# Analog digital bi-direction converters -# -CONFIG_ADT7316=m -CONFIG_ADT7316_SPI=m -CONFIG_ADT7316_I2C=m - -# -# Capacitance to digital converters -# -CONFIG_AD7150=m -CONFIG_AD7152=m -CONFIG_AD7746=m - -# -# Direct Digital Synthesis -# -CONFIG_AD9832=m -CONFIG_AD9834=m - -# -# Digital gyroscope sensors -# -CONFIG_ADIS16060=m - -# -# Network Analyzer, Impedance Converters -# -CONFIG_AD5933=m - -# -# Light sensors -# -CONFIG_TSL2x7x=m - -# -# Active energy metering IC -# -CONFIG_ADE7753=m -CONFIG_ADE7754=m -CONFIG_ADE7758=m -CONFIG_ADE7759=m -CONFIG_ADE7854=m -CONFIG_ADE7854_I2C=m -CONFIG_ADE7854_SPI=m - -# -# Resolver to digital converters -# -CONFIG_AD2S90=m -CONFIG_AD2S1200=m -CONFIG_AD2S1210=m - -# -# Triggers - standalone -# -CONFIG_FB_SM750=m -CONFIG_FB_XGI=m - -# -# Speakup console speech -# -CONFIG_SPEAKUP=m -CONFIG_SPEAKUP_SYNTH_ACNTSA=m -CONFIG_SPEAKUP_SYNTH_APOLLO=m -CONFIG_SPEAKUP_SYNTH_AUDPTR=m -CONFIG_SPEAKUP_SYNTH_BNS=m -CONFIG_SPEAKUP_SYNTH_DECTLK=m -CONFIG_SPEAKUP_SYNTH_DECEXT=m -CONFIG_SPEAKUP_SYNTH_LTLK=m -CONFIG_SPEAKUP_SYNTH_SOFT=m -CONFIG_SPEAKUP_SYNTH_SPKOUT=m -CONFIG_SPEAKUP_SYNTH_TXPRT=m -# CONFIG_SPEAKUP_SYNTH_DUMMY is not set -CONFIG_STAGING_MEDIA=y -CONFIG_INTEL_ATOMISP=y -CONFIG_VIDEO_ATOMISP=m -CONFIG_VIDEO_OV5693=m -CONFIG_VIDEO_IMX=m -CONFIG_VIDEO_OV2722=m -CONFIG_VIDEO_GC2235=m -CONFIG_VIDEO_OV8858=m -CONFIG_VIDEO_MSRLIST_HELPER=m -CONFIG_VIDEO_MT9M114=m -CONFIG_VIDEO_AP1302=m -CONFIG_VIDEO_GC0310=m -CONFIG_VIDEO_OV2680=m -CONFIG_VIDEO_LM3554=m -CONFIG_I2C_BCM2048=m -CONFIG_DVB_CXD2099=m -CONFIG_LIRC_STAGING=y -CONFIG_LIRC_ZILOG=m - -# -# Android -# -CONFIG_LTE_GDM724X=m -CONFIG_FIREWIRE_SERIAL=m -CONFIG_FWTTY_MAX_TOTAL_PORTS=64 -CONFIG_FWTTY_MAX_CARD_PORTS=32 -CONFIG_MTD_SPINAND_MT29F=m -CONFIG_MTD_SPINAND_ONDIEECC=y -CONFIG_LNET=m -CONFIG_LNET_MAX_PAYLOAD=1048576 -# CONFIG_LNET_SELFTEST is not set -CONFIG_LNET_XPRT_IB=m -CONFIG_LUSTRE_FS=m -# CONFIG_LUSTRE_DEBUG_EXPENSIVE_CHECK is not set -CONFIG_DGNC=m -CONFIG_GS_FPGABOOT=m -CONFIG_CRYPTO_SKEIN=m -CONFIG_UNISYSSPAR=y -# CONFIG_UNISYS_VISORBUS is not set -CONFIG_FB_TFT=m -CONFIG_FB_TFT_AGM1264K_FL=m -CONFIG_FB_TFT_BD663474=m -CONFIG_FB_TFT_HX8340BN=m -CONFIG_FB_TFT_HX8347D=m -CONFIG_FB_TFT_HX8353D=m -# CONFIG_FB_TFT_HX8357D is not set -# CONFIG_FB_TFT_ILI9163 is not set -CONFIG_FB_TFT_ILI9320=m -CONFIG_FB_TFT_ILI9325=m -CONFIG_FB_TFT_ILI9340=m -CONFIG_FB_TFT_ILI9341=m -CONFIG_FB_TFT_ILI9481=m -CONFIG_FB_TFT_ILI9486=m -CONFIG_FB_TFT_PCD8544=m -CONFIG_FB_TFT_RA8875=m -CONFIG_FB_TFT_S6D02A1=m -CONFIG_FB_TFT_S6D1121=m -CONFIG_FB_TFT_SH1106=m -CONFIG_FB_TFT_SSD1289=m -CONFIG_FB_TFT_SSD1305=m -CONFIG_FB_TFT_SSD1306=m -CONFIG_FB_TFT_SSD1325=m -CONFIG_FB_TFT_SSD1331=m -CONFIG_FB_TFT_SSD1351=m -CONFIG_FB_TFT_ST7735R=m -CONFIG_FB_TFT_ST7789V=m -CONFIG_FB_TFT_TINYLCD=m -CONFIG_FB_TFT_TLS8204=m -CONFIG_FB_TFT_UC1611=m -CONFIG_FB_TFT_UC1701=m -CONFIG_FB_TFT_UPD161704=m -CONFIG_FB_TFT_WATTEROTT=m -CONFIG_FB_FLEX=m -CONFIG_FB_TFT_FBTFT_DEVICE=m -CONFIG_WILC1000=m -CONFIG_WILC1000_SDIO=m -CONFIG_WILC1000_SPI=m -# CONFIG_WILC1000_HW_OOB_INTR is not set -CONFIG_MOST=m -CONFIG_MOSTCORE=m -CONFIG_AIM_CDEV=m -CONFIG_AIM_NETWORK=m -CONFIG_AIM_SOUND=m -CONFIG_AIM_V4L2=m -CONFIG_HDM_DIM2=m -CONFIG_HDM_I2C=m -CONFIG_HDM_USB=m -CONFIG_KS7010=m -CONFIG_GREYBUS=m -CONFIG_GREYBUS_ES2=m -CONFIG_GREYBUS_AUDIO=m -CONFIG_GREYBUS_BOOTROM=m -CONFIG_GREYBUS_FIRMWARE=m -CONFIG_GREYBUS_HID=m -CONFIG_GREYBUS_LIGHT=m -CONFIG_GREYBUS_LOG=m -CONFIG_GREYBUS_LOOPBACK=m -CONFIG_GREYBUS_POWER=m -CONFIG_GREYBUS_RAW=m -CONFIG_GREYBUS_VIBRATOR=m -CONFIG_GREYBUS_BRIDGED_PHY=m -CONFIG_GREYBUS_GPIO=m -CONFIG_GREYBUS_I2C=m -CONFIG_GREYBUS_PWM=m -CONFIG_GREYBUS_SDIO=m -CONFIG_GREYBUS_SPI=m -CONFIG_GREYBUS_UART=m -CONFIG_GREYBUS_USB=m - -# -# USB Power Delivery and Type-C drivers -# -CONFIG_TYPEC_TCPM=m -CONFIG_TYPEC_TCPCI=m -CONFIG_TYPEC_FUSB302=m -CONFIG_DRM_VBOXVIDEO=m -CONFIG_PI433=m -CONFIG_X86_PLATFORM_DEVICES=y -CONFIG_ACER_WMI=m -CONFIG_ACERHDF=m -CONFIG_ALIENWARE_WMI=m -CONFIG_ASUS_LAPTOP=m -CONFIG_DELL_SMBIOS=m -CONFIG_DELL_LAPTOP=m -CONFIG_DELL_WMI=m -CONFIG_DELL_WMI_AIO=m -CONFIG_DELL_WMI_LED=m -CONFIG_DELL_SMO8800=m -CONFIG_DELL_RBTN=m -CONFIG_FUJITSU_LAPTOP=m -CONFIG_FUJITSU_TABLET=m -CONFIG_AMILO_RFKILL=m -CONFIG_HP_ACCEL=m -CONFIG_HP_WIRELESS=m -CONFIG_HP_WMI=m -CONFIG_MSI_LAPTOP=m -CONFIG_PANASONIC_LAPTOP=m -CONFIG_COMPAL_LAPTOP=m -CONFIG_SONY_LAPTOP=m -CONFIG_SONYPI_COMPAT=y -CONFIG_IDEAPAD_LAPTOP=m -CONFIG_SURFACE3_WMI=m -CONFIG_THINKPAD_ACPI=m -CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y -# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set -# CONFIG_THINKPAD_ACPI_DEBUG is not set -# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set -CONFIG_THINKPAD_ACPI_VIDEO=y -CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y -CONFIG_SENSORS_HDAPS=m -CONFIG_INTEL_MENLOW=m -CONFIG_EEEPC_LAPTOP=m -CONFIG_ASUS_WMI=m -CONFIG_ASUS_NB_WMI=m -CONFIG_EEEPC_WMI=m -CONFIG_ASUS_WIRELESS=m -CONFIG_ACPI_WMI=m -CONFIG_WMI_BMOF=m -CONFIG_MSI_WMI=m -CONFIG_PEAQ_WMI=m -CONFIG_TOPSTAR_LAPTOP=m -CONFIG_ACPI_TOSHIBA=m -CONFIG_TOSHIBA_BT_RFKILL=m -CONFIG_TOSHIBA_HAPS=m -CONFIG_TOSHIBA_WMI=m -CONFIG_ACPI_CMPC=m -CONFIG_INTEL_CHT_INT33FE=m -CONFIG_INTEL_INT0002_VGPIO=m -CONFIG_INTEL_HID_EVENT=m -CONFIG_INTEL_VBTN=m -CONFIG_INTEL_IPS=m -CONFIG_INTEL_PMC_CORE=y -CONFIG_IBM_RTL=m -CONFIG_SAMSUNG_LAPTOP=m -CONFIG_MXM_WMI=m -CONFIG_INTEL_OAKTRAIL=m -CONFIG_SAMSUNG_Q10=m -CONFIG_APPLE_GMUX=m -CONFIG_INTEL_RST=m -CONFIG_INTEL_SMARTCONNECT=m -CONFIG_PVPANIC=m -CONFIG_INTEL_PMC_IPC=m -CONFIG_INTEL_BXTWC_PMIC_TMU=m -CONFIG_SURFACE_PRO3_BUTTON=m -CONFIG_SURFACE_3_BUTTON=m -CONFIG_INTEL_PUNIT_IPC=m -CONFIG_INTEL_TELEMETRY=m -CONFIG_MLX_PLATFORM=m -CONFIG_MLX_CPLD_PLATFORM=m -# CONFIG_INTEL_TURBO_MAX_3 is not set -CONFIG_PMC_ATOM=y -CONFIG_CHROME_PLATFORMS=y -CONFIG_CHROMEOS_LAPTOP=m -CONFIG_CHROMEOS_PSTORE=m -CONFIG_CROS_EC_CHARDEV=m -CONFIG_CROS_EC_LPC=m -CONFIG_CROS_EC_LPC_MEC=y -CONFIG_CROS_EC_PROTO=y -CONFIG_CROS_KBD_LED_BACKLIGHT=m -CONFIG_CLKDEV_LOOKUP=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_COMMON_CLK=y - -# -# Common Clock Framework -# -CONFIG_COMMON_CLK_WM831X=m -CONFIG_COMMON_CLK_SI5351=m -CONFIG_COMMON_CLK_CDCE706=m -CONFIG_COMMON_CLK_CS2000_CP=m -# CONFIG_COMMON_CLK_NXP is not set -CONFIG_COMMON_CLK_PWM=m -# CONFIG_COMMON_CLK_PXA is not set -# CONFIG_COMMON_CLK_PIC32 is not set -CONFIG_HWSPINLOCK=m - -# -# Clock Source drivers -# -CONFIG_CLKEVT_I8253=y -CONFIG_I8253_LOCK=y -CONFIG_CLKBLD_I8253=y -# CONFIG_ATMEL_PIT is not set -# CONFIG_SH_TIMER_CMT is not set -# CONFIG_SH_TIMER_MTU2 is not set -# CONFIG_SH_TIMER_TMU is not set -# CONFIG_EM_TIMER_STI is not set -CONFIG_MAILBOX=y -CONFIG_PCC=y -CONFIG_ALTERA_MBOX=m -CONFIG_IOMMU_API=y -CONFIG_IOMMU_SUPPORT=y - -# -# Generic IOMMU Pagetable Support -# -CONFIG_IOMMU_IOVA=y -CONFIG_AMD_IOMMU=y -CONFIG_AMD_IOMMU_V2=m -CONFIG_DMAR_TABLE=y -CONFIG_INTEL_IOMMU=y -CONFIG_INTEL_IOMMU_SVM=y -# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set -CONFIG_INTEL_IOMMU_FLOPPY_WA=y -CONFIG_IRQ_REMAP=y - -# -# Remoteproc drivers -# -CONFIG_REMOTEPROC=m - -# -# Rpmsg drivers -# -CONFIG_RPMSG=m -CONFIG_RPMSG_CHAR=m -CONFIG_RPMSG_QCOM_GLINK_NATIVE=m -CONFIG_RPMSG_QCOM_GLINK_RPM=m - -# -# SOC (System On Chip) specific Drivers -# - -# -# Amlogic SoC drivers -# - -# -# Broadcom SoC drivers -# - -# -# i.MX SoC drivers -# - -# -# Qualcomm SoC drivers -# -# CONFIG_SUNXI_SRAM is not set -CONFIG_SOC_TI=y -CONFIG_PM_DEVFREQ=y - -# -# DEVFREQ Governors -# -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y -CONFIG_DEVFREQ_GOV_PERFORMANCE=y -CONFIG_DEVFREQ_GOV_POWERSAVE=y -CONFIG_DEVFREQ_GOV_USERSPACE=y -CONFIG_DEVFREQ_GOV_PASSIVE=m - -# -# DEVFREQ Drivers -# -CONFIG_PM_DEVFREQ_EVENT=y -CONFIG_EXTCON=y - -# -# Extcon Device Drivers -# -CONFIG_EXTCON_ADC_JACK=m -CONFIG_EXTCON_ARIZONA=m -CONFIG_EXTCON_AXP288=m -CONFIG_EXTCON_GPIO=m -# CONFIG_EXTCON_INTEL_INT3496 is not set -CONFIG_EXTCON_MAX14577=m -CONFIG_EXTCON_MAX3355=m -CONFIG_EXTCON_MAX77693=m -CONFIG_EXTCON_RT8973A=m -CONFIG_EXTCON_SM5502=m -# CONFIG_EXTCON_USB_GPIO is not set -CONFIG_EXTCON_USBC_CROS_EC=m -CONFIG_MEMORY=y -CONFIG_IIO=m -CONFIG_IIO_BUFFER=y -CONFIG_IIO_BUFFER_CB=m -CONFIG_IIO_KFIFO_BUF=m -CONFIG_IIO_TRIGGERED_BUFFER=m -CONFIG_IIO_CONFIGFS=m -CONFIG_IIO_TRIGGER=y -CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 -CONFIG_IIO_SW_DEVICE=m -CONFIG_IIO_SW_TRIGGER=m -CONFIG_IIO_TRIGGERED_EVENT=m - -# -# Accelerometers -# -CONFIG_BMA180=m -CONFIG_BMA220=m -CONFIG_BMC150_ACCEL=m -CONFIG_BMC150_ACCEL_I2C=m -CONFIG_BMC150_ACCEL_SPI=m -CONFIG_DA280=m -CONFIG_DA311=m -CONFIG_DMARD09=m -CONFIG_DMARD10=m -CONFIG_HID_SENSOR_ACCEL_3D=m -CONFIG_IIO_ST_ACCEL_3AXIS=m -CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m -CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m -CONFIG_KXSD9=m -CONFIG_KXSD9_SPI=m -CONFIG_KXSD9_I2C=m -CONFIG_KXCJK1013=m -CONFIG_MC3230=m -CONFIG_MMA7455=m -CONFIG_MMA7455_I2C=m -CONFIG_MMA7455_SPI=m -CONFIG_MMA7660=m -CONFIG_MMA8452=m -CONFIG_MMA9551_CORE=m -CONFIG_MMA9551=m -CONFIG_MMA9553=m -CONFIG_MXC4005=m -CONFIG_MXC6255=m -CONFIG_SCA3000=m -CONFIG_STK8312=m -CONFIG_STK8BA50=m - -# -# Analog to digital converters -# -CONFIG_AD_SIGMA_DELTA=m -CONFIG_AD7266=m -CONFIG_AD7291=m -CONFIG_AD7298=m -CONFIG_AD7476=m -CONFIG_AD7766=m -CONFIG_AD7791=m -CONFIG_AD7793=m -CONFIG_AD7887=m -CONFIG_AD7923=m -CONFIG_AD799X=m -CONFIG_AXP20X_ADC=m -CONFIG_AXP288_ADC=m -CONFIG_CC10001_ADC=m -CONFIG_DA9150_GPADC=m -CONFIG_DLN2_ADC=m -CONFIG_HI8435=m -CONFIG_HX711=m -CONFIG_INA2XX_ADC=m -CONFIG_LTC2471=m -CONFIG_LTC2485=m -CONFIG_LTC2497=m -CONFIG_MAX1027=m -CONFIG_MAX11100=m -CONFIG_MAX1118=m -CONFIG_MAX1363=m -CONFIG_MAX9611=m -CONFIG_MCP320X=m -CONFIG_MCP3422=m -CONFIG_MEN_Z188_ADC=m -CONFIG_NAU7802=m -CONFIG_QCOM_VADC_COMMON=m -CONFIG_QCOM_SPMI_IADC=m -CONFIG_QCOM_SPMI_VADC=m -CONFIG_TI_ADC081C=m -CONFIG_TI_ADC0832=m -CONFIG_TI_ADC084S021=m -CONFIG_TI_ADC12138=m -CONFIG_TI_ADC108S102=m -CONFIG_TI_ADC128S052=m -CONFIG_TI_ADC161S626=m -CONFIG_TI_ADS1015=m -CONFIG_TI_ADS7950=m -CONFIG_TI_AM335X_ADC=m -CONFIG_TI_TLC4541=m -CONFIG_VIPERBOARD_ADC=m - -# -# Amplifiers -# -CONFIG_AD8366=m - -# -# Chemical Sensors -# -CONFIG_ATLAS_PH_SENSOR=m -CONFIG_CCS811=m -CONFIG_IAQCORE=m -CONFIG_VZ89X=m -CONFIG_IIO_CROS_EC_SENSORS_CORE=m -CONFIG_IIO_CROS_EC_SENSORS=m - -# -# Hid Sensor IIO Common -# -CONFIG_HID_SENSOR_IIO_COMMON=m -CONFIG_HID_SENSOR_IIO_TRIGGER=m -CONFIG_IIO_MS_SENSORS_I2C=m - -# -# SSP Sensor Common -# -CONFIG_IIO_SSP_SENSORS_COMMONS=m -CONFIG_IIO_SSP_SENSORHUB=m -CONFIG_IIO_ST_SENSORS_I2C=m -CONFIG_IIO_ST_SENSORS_SPI=m -CONFIG_IIO_ST_SENSORS_CORE=m - -# -# Counters -# - -# -# Digital to analog converters -# -CONFIG_AD5064=m -CONFIG_AD5360=m -CONFIG_AD5380=m -CONFIG_AD5421=m -CONFIG_AD5446=m -CONFIG_AD5449=m -CONFIG_AD5592R_BASE=m -CONFIG_AD5592R=m -CONFIG_AD5593R=m -CONFIG_AD5504=m -CONFIG_AD5624R_SPI=m -CONFIG_LTC2632=m -CONFIG_AD5686=m -CONFIG_AD5755=m -CONFIG_AD5761=m -CONFIG_AD5764=m -CONFIG_AD5791=m -CONFIG_AD7303=m -CONFIG_AD8801=m -CONFIG_M62332=m -CONFIG_MAX517=m -CONFIG_MCP4725=m -CONFIG_MCP4922=m - -# -# IIO dummy driver -# -# CONFIG_IIO_SIMPLE_DUMMY is not set - -# -# Frequency Synthesizers DDS/PLL -# - -# -# Clock Generator/Distribution -# -CONFIG_AD9523=m - -# -# Phase-Locked Loop (PLL) frequency synthesizers -# -CONFIG_ADF4350=m - -# -# Digital gyroscope sensors -# -CONFIG_ADIS16080=m -CONFIG_ADIS16130=m -CONFIG_ADIS16136=m -CONFIG_ADIS16260=m -CONFIG_ADXRS450=m -CONFIG_BMG160=m -CONFIG_BMG160_I2C=m -CONFIG_BMG160_SPI=m -CONFIG_HID_SENSOR_GYRO_3D=m -CONFIG_MPU3050=m -CONFIG_MPU3050_I2C=m -CONFIG_IIO_ST_GYRO_3AXIS=m -CONFIG_IIO_ST_GYRO_I2C_3AXIS=m -CONFIG_IIO_ST_GYRO_SPI_3AXIS=m -CONFIG_ITG3200=m - -# -# Health Sensors -# - -# -# Heart Rate Monitors -# -CONFIG_AFE4403=m -CONFIG_AFE4404=m -CONFIG_MAX30100=m -CONFIG_MAX30102=m - -# -# Humidity sensors -# -CONFIG_AM2315=m -CONFIG_DHT11=m -CONFIG_HDC100X=m -CONFIG_HID_SENSOR_HUMIDITY=m -CONFIG_HTS221=m -CONFIG_HTS221_I2C=m -CONFIG_HTS221_SPI=m -CONFIG_HTU21=m -CONFIG_SI7005=m -CONFIG_SI7020=m - -# -# Inertial measurement units -# -CONFIG_ADIS16400=m -CONFIG_ADIS16480=m -CONFIG_BMI160=m -CONFIG_BMI160_I2C=m -CONFIG_BMI160_SPI=m -CONFIG_KMX61=m -CONFIG_INV_MPU6050_IIO=m -CONFIG_INV_MPU6050_I2C=m -CONFIG_INV_MPU6050_SPI=m -CONFIG_IIO_ST_LSM6DSX=m -CONFIG_IIO_ST_LSM6DSX_I2C=m -CONFIG_IIO_ST_LSM6DSX_SPI=m -CONFIG_IIO_ADIS_LIB=m -CONFIG_IIO_ADIS_LIB_BUFFER=y - -# -# Light sensors -# -# CONFIG_ACPI_ALS is not set -CONFIG_ADJD_S311=m -CONFIG_AL3320A=m -CONFIG_APDS9300=m -CONFIG_APDS9960=m -CONFIG_BH1750=m -CONFIG_BH1780=m -CONFIG_CM32181=m -CONFIG_CM3232=m -CONFIG_CM3323=m -CONFIG_CM36651=m -CONFIG_IIO_CROS_EC_LIGHT_PROX=m -CONFIG_GP2AP020A00F=m -CONFIG_SENSORS_ISL29018=m -CONFIG_SENSORS_ISL29028=m -CONFIG_ISL29125=m -CONFIG_HID_SENSOR_ALS=m -CONFIG_HID_SENSOR_PROX=m -CONFIG_JSA1212=m -CONFIG_RPR0521=m -CONFIG_SENSORS_LM3533=m -CONFIG_LTR501=m -CONFIG_MAX44000=m -CONFIG_OPT3001=m -CONFIG_PA12203001=m -CONFIG_SI1145=m -CONFIG_STK3310=m -CONFIG_TCS3414=m -CONFIG_TCS3472=m -CONFIG_SENSORS_TSL2563=m -CONFIG_TSL2583=m -CONFIG_TSL4531=m -CONFIG_US5182D=m -CONFIG_VCNL4000=m -CONFIG_VEML6070=m -CONFIG_VL6180=m - -# -# Magnetometer sensors -# -CONFIG_AK8975=m -CONFIG_AK09911=m -CONFIG_BMC150_MAGN=m -CONFIG_BMC150_MAGN_I2C=m -CONFIG_BMC150_MAGN_SPI=m -CONFIG_MAG3110=m -CONFIG_HID_SENSOR_MAGNETOMETER_3D=m -CONFIG_MMC35240=m -CONFIG_IIO_ST_MAGN_3AXIS=m -CONFIG_IIO_ST_MAGN_I2C_3AXIS=m -CONFIG_IIO_ST_MAGN_SPI_3AXIS=m -CONFIG_SENSORS_HMC5843=m -CONFIG_SENSORS_HMC5843_I2C=m -CONFIG_SENSORS_HMC5843_SPI=m - -# -# Multiplexers -# - -# -# Inclinometer sensors -# -CONFIG_HID_SENSOR_INCLINOMETER_3D=m -CONFIG_HID_SENSOR_DEVICE_ROTATION=m - -# -# Triggers - standalone -# -CONFIG_IIO_HRTIMER_TRIGGER=m -CONFIG_IIO_INTERRUPT_TRIGGER=m -CONFIG_IIO_TIGHTLOOP_TRIGGER=m -CONFIG_IIO_SYSFS_TRIGGER=m - -# -# Digital potentiometers -# -CONFIG_DS1803=m -CONFIG_MAX5481=m -CONFIG_MAX5487=m -CONFIG_MCP4131=m -CONFIG_MCP4531=m -CONFIG_TPL0102=m - -# -# Digital potentiostats -# -CONFIG_LMP91000=m - -# -# Pressure sensors -# -CONFIG_ABP060MG=m -CONFIG_BMP280=m -CONFIG_BMP280_I2C=m -CONFIG_BMP280_SPI=m -CONFIG_IIO_CROS_EC_BARO=m -CONFIG_HID_SENSOR_PRESS=m -CONFIG_HP03=m -CONFIG_MPL115=m -CONFIG_MPL115_I2C=m -CONFIG_MPL115_SPI=m -CONFIG_MPL3115=m -CONFIG_MS5611=m -CONFIG_MS5611_I2C=m -CONFIG_MS5611_SPI=m -CONFIG_MS5637=m -CONFIG_IIO_ST_PRESS=m -CONFIG_IIO_ST_PRESS_I2C=m -CONFIG_IIO_ST_PRESS_SPI=m -CONFIG_T5403=m -CONFIG_HP206C=m -CONFIG_ZPA2326=m -CONFIG_ZPA2326_I2C=m -CONFIG_ZPA2326_SPI=m - -# -# Lightning sensors -# -CONFIG_AS3935=m - -# -# Proximity and distance sensors -# -CONFIG_LIDAR_LITE_V2=m -CONFIG_SRF04=m -CONFIG_SX9500=m -CONFIG_SRF08=m - -# -# Temperature sensors -# -CONFIG_MAXIM_THERMOCOUPLE=m -CONFIG_HID_SENSOR_TEMP=m -CONFIG_MLX90614=m -CONFIG_TMP006=m -CONFIG_TMP007=m -CONFIG_TSYS01=m -CONFIG_TSYS02D=m -CONFIG_NTB=m -CONFIG_NTB_AMD=m -CONFIG_NTB_IDT=m -CONFIG_NTB_INTEL=m -CONFIG_NTB_PINGPONG=m -CONFIG_NTB_TOOL=m -CONFIG_NTB_PERF=m -CONFIG_NTB_TRANSPORT=m -CONFIG_VME_BUS=y - -# -# VME Bridge Drivers -# -CONFIG_VME_CA91CX42=m -CONFIG_VME_TSI148=m -CONFIG_VME_FAKE=m - -# -# VME Board Drivers -# -CONFIG_VMIVME_7805=m - -# -# VME Device Drivers -# -CONFIG_VME_USER=m -CONFIG_VME_PIO2=m -CONFIG_PWM=y -CONFIG_PWM_SYSFS=y -CONFIG_PWM_CROS_EC=m -CONFIG_PWM_LP3943=m -CONFIG_PWM_LPSS=m -CONFIG_PWM_LPSS_PCI=m -CONFIG_PWM_LPSS_PLATFORM=m -CONFIG_PWM_PCA9685=m -CONFIG_ARM_GIC_MAX_NR=1 -CONFIG_IPACK_BUS=m -CONFIG_BOARD_TPCI200=m -CONFIG_SERIAL_IPOCTAL=m -CONFIG_RESET_CONTROLLER=y -# CONFIG_RESET_ATH79 is not set -# CONFIG_RESET_BERLIN is not set -# CONFIG_RESET_IMX7 is not set -# CONFIG_RESET_LANTIQ is not set -# CONFIG_RESET_LPC18XX is not set -# CONFIG_RESET_MESON is not set -# CONFIG_RESET_PISTACHIO is not set -# CONFIG_RESET_SOCFPGA is not set -# CONFIG_RESET_STM32 is not set -# CONFIG_RESET_SUNXI is not set -CONFIG_RESET_TI_SYSCON=m -# CONFIG_RESET_ZYNQ is not set -# CONFIG_RESET_TEGRA_BPMP is not set -CONFIG_FMC=m -CONFIG_FMC_FAKEDEV=m -CONFIG_FMC_TRIVIAL=m -CONFIG_FMC_WRITE_EEPROM=m -CONFIG_FMC_CHARDEV=m - -# -# PHY Subsystem -# -CONFIG_GENERIC_PHY=y -CONFIG_BCM_KONA_USB2_PHY=m -CONFIG_PHY_PXA_28NM_HSIC=m -CONFIG_PHY_PXA_28NM_USB2=m -CONFIG_PHY_CPCAP_USB=m -CONFIG_PHY_QCOM_USB_HS=m -CONFIG_PHY_QCOM_USB_HSIC=m -CONFIG_PHY_SAMSUNG_USB2=m -# CONFIG_PHY_EXYNOS4210_USB2 is not set -# CONFIG_PHY_EXYNOS4X12_USB2 is not set -# CONFIG_PHY_EXYNOS5250_USB2 is not set -CONFIG_PHY_TUSB1210=m -CONFIG_POWERCAP=y -CONFIG_INTEL_RAPL=m -CONFIG_MCB=m -CONFIG_MCB_PCI=m -CONFIG_MCB_LPC=m - -# -# Performance monitor support -# -CONFIG_RAS=y -CONFIG_RAS_CEC=y -CONFIG_THUNDERBOLT=m - -# -# Android -# -# CONFIG_ANDROID is not set -CONFIG_LIBNVDIMM=m -CONFIG_BLK_DEV_PMEM=m -CONFIG_ND_BLK=m -CONFIG_ND_CLAIM=y -CONFIG_ND_BTT=m -CONFIG_BTT=y -CONFIG_DAX=y -CONFIG_DEV_DAX=m -CONFIG_NVMEM=y -CONFIG_STM=m -# CONFIG_STM_DUMMY is not set -CONFIG_STM_SOURCE_CONSOLE=m -CONFIG_STM_SOURCE_HEARTBEAT=m -CONFIG_INTEL_TH=m -CONFIG_INTEL_TH_PCI=m -CONFIG_INTEL_TH_GTH=m -CONFIG_INTEL_TH_STH=m -CONFIG_INTEL_TH_MSU=m -CONFIG_INTEL_TH_PTI=m -# CONFIG_INTEL_TH_DEBUG is not set -CONFIG_FPGA=m -CONFIG_FPGA_MGR_ALTERA_CVP=m -CONFIG_FPGA_MGR_ALTERA_PS_SPI=m -CONFIG_FPGA_MGR_XILINX_SPI=m -CONFIG_ALTERA_PR_IP_CORE=m - -# -# FSI support -# -CONFIG_FSI=m -CONFIG_FSI_MASTER_GPIO=m -CONFIG_FSI_MASTER_HUB=m -CONFIG_FSI_SCOM=m - -# -# Firmware Drivers -# -CONFIG_EDD=m -# CONFIG_EDD_OFF is not set -CONFIG_FIRMWARE_MEMMAP=y -CONFIG_DELL_RBU=m -CONFIG_DCDBAS=m -CONFIG_DMIID=y -CONFIG_DMI_SYSFS=m -CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y -CONFIG_ISCSI_IBFT_FIND=y -CONFIG_ISCSI_IBFT=m -CONFIG_FW_CFG_SYSFS=m -# CONFIG_FW_CFG_SYSFS_CMDLINE is not set -CONFIG_GOOGLE_FIRMWARE=y -CONFIG_GOOGLE_SMI=m -CONFIG_GOOGLE_COREBOOT_TABLE=m -CONFIG_GOOGLE_COREBOOT_TABLE_ACPI=m -CONFIG_GOOGLE_MEMCONSOLE=m -CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY=m -CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=m -CONFIG_GOOGLE_VPD=m - -# -# EFI (Extensible Firmware Interface) Support -# -CONFIG_EFI_VARS=m -CONFIG_EFI_ESRT=y -CONFIG_EFI_VARS_PSTORE=m -CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y -CONFIG_EFI_RUNTIME_MAP=y -# CONFIG_EFI_FAKE_MEMMAP is not set -CONFIG_EFI_RUNTIME_WRAPPERS=y -CONFIG_EFI_BOOTLOADER_CONTROL=m -CONFIG_EFI_CAPSULE_LOADER=m -CONFIG_EFI_TEST=m -CONFIG_APPLE_PROPERTIES=y -CONFIG_RESET_ATTACK_MITIGATION=y -CONFIG_UEFI_CPER=y -CONFIG_EFI_DEV_PATH_PARSER=y - -# -# Tegra firmware driver -# - -# -# File systems -# -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_FS_IOMAP=y -CONFIG_EXT2_FS=m -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_EXT4_FS=m -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -CONFIG_EXT4_ENCRYPTION=y -CONFIG_EXT4_FS_ENCRYPTION=y -# CONFIG_EXT4_DEBUG is not set -CONFIG_JBD2=m -# CONFIG_JBD2_DEBUG is not set -CONFIG_FS_MBCACHE=m -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -# CONFIG_XFS_WARN is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y -# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set -# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set -# CONFIG_BTRFS_DEBUG is not set -# CONFIG_BTRFS_ASSERT is not set -CONFIG_NILFS2_FS=m -CONFIG_F2FS_FS=m -CONFIG_F2FS_STAT_FS=y -CONFIG_F2FS_FS_XATTR=y -CONFIG_F2FS_FS_POSIX_ACL=y -CONFIG_F2FS_FS_SECURITY=y -CONFIG_F2FS_CHECK_FS=y -CONFIG_F2FS_FS_ENCRYPTION=y -# CONFIG_F2FS_FAULT_INJECTION is not set -CONFIG_FS_DAX=y -CONFIG_FS_POSIX_ACL=y -CONFIG_EXPORTFS=y -CONFIG_EXPORTFS_BLOCK_OPS=y -CONFIG_FILE_LOCKING=y -CONFIG_MANDATORY_FILE_LOCKING=y -CONFIG_FS_ENCRYPTION=m -CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_FANOTIFY=y -# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_PRINT_QUOTA_WARNING is not set -# CONFIG_QUOTA_DEBUG is not set -CONFIG_QUOTA_TREE=m -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QUOTACTL=y -CONFIG_QUOTACTL_COMPAT=y -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m -CONFIG_CUSE=m -CONFIG_OVERLAY_FS=m -# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set -CONFIG_OVERLAY_FS_INDEX=y - -# -# Caches -# -CONFIG_FSCACHE=m -CONFIG_FSCACHE_STATS=y -# CONFIG_FSCACHE_HISTOGRAM is not set -# CONFIG_FSCACHE_DEBUG is not set -# CONFIG_FSCACHE_OBJECT_LIST is not set -CONFIG_CACHEFILES=m -# CONFIG_CACHEFILES_DEBUG is not set -# CONFIG_CACHEFILES_HISTOGRAM is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="utf8" -# CONFIG_FAT_DEFAULT_UTF8 is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -CONFIG_NTFS_RW=y - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -# CONFIG_PROC_CHILDREN is not set -CONFIG_KERNFS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TMPFS_XATTR=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_ARCH_HAS_GIGANTIC_PAGE=y -CONFIG_CONFIGFS_FS=m -CONFIG_EFIVAR_FS=m -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ORANGEFS_FS=m -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_ECRYPT_FS=m -CONFIG_ECRYPT_FS_MESSAGING=y -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_HFSPLUS_FS_POSIX_ACL=y -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -CONFIG_JFFS2_FS_WBUF_VERIFY=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_FS_POSIX_ACL=y -CONFIG_JFFS2_FS_SECURITY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_UBIFS_FS=m -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UBIFS_ATIME_SUPPORT=y -CONFIG_UBIFS_FS_ENCRYPTION=y -CONFIG_UBIFS_FS_SECURITY=y -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_FILE_CACHE is not set -CONFIG_SQUASHFS_FILE_DIRECT=y -# CONFIG_SQUASHFS_DECOMP_SINGLE is not set -# CONFIG_SQUASHFS_DECOMP_MULTI is not set -CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y -CONFIG_SQUASHFS_XATTR=y -CONFIG_SQUASHFS_ZLIB=y -CONFIG_SQUASHFS_LZ4=y -CONFIG_SQUASHFS_LZO=y -CONFIG_SQUASHFS_XZ=y -CONFIG_SQUASHFS_ZSTD=y -CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y -CONFIG_SQUASHFS_EMBEDDED=y -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_OMFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_QNX6FS_FS=m -# CONFIG_QNX6FS_DEBUG is not set -CONFIG_ROMFS_FS=m -# CONFIG_ROMFS_BACKED_BY_BLOCK is not set -# CONFIG_ROMFS_BACKED_BY_MTD is not set -CONFIG_ROMFS_BACKED_BY_BOTH=y -CONFIG_ROMFS_ON_BLOCK=y -CONFIG_ROMFS_ON_MTD=y -CONFIG_PSTORE=y -# CONFIG_PSTORE_ZLIB_COMPRESS is not set -# CONFIG_PSTORE_LZO_COMPRESS is not set -CONFIG_PSTORE_LZ4_COMPRESS=y -# CONFIG_PSTORE_CONSOLE is not set -CONFIG_PSTORE_PMSG=y -CONFIG_PSTORE_RAM=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_EXOFS_FS=m -# CONFIG_EXOFS_DEBUG is not set -CONFIG_ORE=m -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V2=m -CONFIG_NFS_V3=m -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=m -CONFIG_NFS_SWAP=y -CONFIG_NFS_V4_1=y -CONFIG_NFS_V4_2=y -CONFIG_PNFS_FILE_LAYOUT=m -CONFIG_PNFS_BLOCK=m -CONFIG_PNFS_FLEXFILE_LAYOUT=m -CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" -CONFIG_NFS_V4_1_MIGRATION=y -CONFIG_NFS_V4_SECURITY_LABEL=y -CONFIG_NFS_FSCACHE=y -# CONFIG_NFS_USE_LEGACY_DNS is not set -CONFIG_NFS_USE_KERNEL_DNS=y -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_PNFS=y -CONFIG_NFSD_BLOCKLAYOUT=y -CONFIG_NFSD_SCSILAYOUT=y -CONFIG_NFSD_FLEXFILELAYOUT=y -# CONFIG_NFSD_V4_SECURITY_LABEL is not set -# CONFIG_NFSD_FAULT_INJECTION is not set -CONFIG_GRACE_PERIOD=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_SUNRPC_BACKCHANNEL=y -CONFIG_SUNRPC_SWAP=y -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_SUNRPC_DEBUG is not set -CONFIG_SUNRPC_XPRT_RDMA=m -CONFIG_CEPH_FS=m -CONFIG_CEPH_FSCACHE=y -CONFIG_CEPH_FS_POSIX_ACL=y -CONFIG_CIFS=m -CONFIG_CIFS_STATS=y -CONFIG_CIFS_STATS2=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_UPCALL=y -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_ACL=y -# CONFIG_CIFS_DEBUG is not set -CONFIG_CIFS_DFS_UPCALL=y -CONFIG_CIFS_SMB311=y -CONFIG_CIFS_FSCACHE=y -CONFIG_NCP_FS=m -CONFIG_NCPFS_PACKET_SIGNING=y -CONFIG_NCPFS_IOCTL_LOCKING=y -CONFIG_NCPFS_STRONG=y -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -CONFIG_NCPFS_SMALLDOS=y -CONFIG_NCPFS_NLS=y -CONFIG_NCPFS_EXTRAS=y -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -# CONFIG_AFS_DEBUG is not set -CONFIG_AFS_FSCACHE=y -CONFIG_9P_FS=m -CONFIG_9P_FSCACHE=y -CONFIG_9P_FS_POSIX_ACL=y -CONFIG_9P_FS_SECURITY=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_MAC_ROMAN=m -CONFIG_NLS_MAC_CELTIC=m -CONFIG_NLS_MAC_CENTEURO=m -CONFIG_NLS_MAC_CROATIAN=m -CONFIG_NLS_MAC_CYRILLIC=m -CONFIG_NLS_MAC_GAELIC=m -CONFIG_NLS_MAC_GREEK=m -CONFIG_NLS_MAC_ICELAND=m -CONFIG_NLS_MAC_INUIT=m -CONFIG_NLS_MAC_ROMANIAN=m -CONFIG_NLS_MAC_TURKISH=m -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -# CONFIG_DLM_DEBUG is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y - -# -# printk and dmesg options -# -# CONFIG_PRINTK_TIME is not set -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=1 -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=1 -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_DYNAMIC_DEBUG is not set - -# -# Compile-time checks and compiler options -# -# CONFIG_DEBUG_INFO is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=0 -CONFIG_STRIP_ASM_SYMS=y -# CONFIG_READABLE_ASM is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_PAGE_OWNER is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_SECTION_MISMATCH is not set -CONFIG_SECTION_MISMATCH_WARN_ONLY=y -CONFIG_STACK_VALIDATION=y -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 -CONFIG_MAGIC_SYSRQ_SERIAL=y -CONFIG_DEBUG_KERNEL=y - -# -# Memory Debugging -# -# CONFIG_PAGE_EXTENSION is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_PAGE_POISONING is not set -# CONFIG_DEBUG_PAGE_REF is not set -# CONFIG_DEBUG_RODATA_TEST is not set -# CONFIG_DEBUG_OBJECTS is not set -CONFIG_SLUB_DEBUG_ON=y -# CONFIG_SLUB_STATS is not set -CONFIG_HAVE_DEBUG_KMEMLEAK=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_VM is not set -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -# CONFIG_DEBUG_VIRTUAL is not set -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_DEBUG_PER_CPU_MAPS is not set -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -CONFIG_HAVE_ARCH_KASAN=y -# CONFIG_KASAN is not set -CONFIG_ARCH_HAS_KCOV=y -# CONFIG_KCOV is not set -# CONFIG_DEBUG_SHIRQ is not set - -# -# Debug Lockups and Hangs -# -# CONFIG_SOFTLOCKUP_DETECTOR is not set -CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y -# CONFIG_HARDLOCKUP_DETECTOR is not set -# CONFIG_DETECT_HUNG_TASK is not set -# CONFIG_WQ_WATCHDOG is not set -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -CONFIG_SCHED_DEBUG=y -CONFIG_SCHED_INFO=y -CONFIG_SCHEDSTATS=y -CONFIG_SCHED_STACK_END_CHECK=y -# CONFIG_DEBUG_TIMEKEEPING is not set -# CONFIG_DEBUG_PREEMPT is not set - -# -# Lock Debugging (spinlocks, mutexes, etc...) -# -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_LOCK_TORTURE_TEST is not set -# CONFIG_WW_MUTEX_SELFTEST is not set -CONFIG_STACKTRACE=y -# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_LIST=y -CONFIG_DEBUG_PI_LIST=y -CONFIG_DEBUG_SG=y -CONFIG_DEBUG_NOTIFIERS=y -CONFIG_DEBUG_CREDENTIALS=y - -# -# RCU Debugging -# -# CONFIG_PROVE_RCU is not set -CONFIG_TORTURE_TEST=m -CONFIG_RCU_PERF_TEST=m -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -# CONFIG_RCU_TRACE is not set -# CONFIG_RCU_EQS_DEBUG is not set -# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set -# CONFIG_NOTIFIER_ERROR_INJECTION is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_USER_STACKTRACE_SUPPORT=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_FENTRY=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_TRACE_CLOCK=y -CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_TRACING=y -CONFIG_TRACING_SUPPORT=y -CONFIG_FTRACE=y -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_HWLAT_TRACER is not set -# CONFIG_ENABLE_DEFAULT_TRACERS is not set -# CONFIG_FTRACE_SYSCALLS is not set -# CONFIG_TRACER_SNAPSHOT is not set -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -CONFIG_KPROBE_EVENTS=y -CONFIG_UPROBE_EVENTS=y -CONFIG_BPF_EVENTS=y -CONFIG_PROBE_EVENTS=y -# CONFIG_MMIOTRACE is not set -# CONFIG_HIST_TRIGGERS is not set -# CONFIG_TRACEPOINT_BENCHMARK is not set -# CONFIG_RING_BUFFER_BENCHMARK is not set -# CONFIG_RING_BUFFER_STARTUP_TEST is not set -# CONFIG_TRACE_EVAL_MAP_FILE is not set -# CONFIG_TRACING_EVENTS_GPIO is not set -# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set -# CONFIG_DMA_API_DEBUG is not set - -# -# Runtime Testing -# -CONFIG_LKDTM=m -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_TEST_SORT is not set -# CONFIG_KPROBES_SANITY_TEST is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_RBTREE_TEST is not set -# CONFIG_INTERVAL_TREE_TEST is not set -# CONFIG_PERCPU_TEST is not set -# CONFIG_ATOMIC64_SELFTEST is not set -# CONFIG_ASYNC_RAID6_TEST is not set -# CONFIG_TEST_HEXDUMP is not set -# CONFIG_TEST_STRING_HELPERS is not set -# CONFIG_TEST_KSTRTOX is not set -CONFIG_TEST_PRINTF=m -CONFIG_TEST_BITMAP=m -CONFIG_TEST_UUID=m -# CONFIG_TEST_RHASHTABLE is not set -CONFIG_TEST_HASH=m -# CONFIG_TEST_PARMAN is not set -CONFIG_TEST_LKM=m -# CONFIG_TEST_USER_COPY is not set -# CONFIG_TEST_BPF is not set -# CONFIG_TEST_FIRMWARE is not set -CONFIG_TEST_SYSCTL=m -# CONFIG_TEST_UDELAY is not set -CONFIG_TEST_STATIC_KEYS=m -CONFIG_TEST_KMOD=m -CONFIG_MEMTEST=y -# CONFIG_BUG_ON_DATA_CORRUPTION is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y -# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set -# CONFIG_UBSAN is not set -CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y -CONFIG_STRICT_DEVMEM=y -CONFIG_IO_STRICT_DEVMEM=y -CONFIG_EARLY_PRINTK_USB=y -CONFIG_X86_VERBOSE_BOOTUP=y -CONFIG_EARLY_PRINTK=y -# CONFIG_EARLY_PRINTK_DBGP is not set -# CONFIG_EARLY_PRINTK_EFI is not set -CONFIG_EARLY_PRINTK_USB_XDBC=y -CONFIG_X86_PTDUMP_CORE=y -# CONFIG_X86_PTDUMP is not set -# CONFIG_EFI_PGT_DUMP is not set -CONFIG_DEBUG_WX=y -CONFIG_DOUBLEFAULT=y -# CONFIG_DEBUG_TLBFLUSH is not set -# CONFIG_IOMMU_DEBUG is not set -# CONFIG_IOMMU_STRESS is not set -CONFIG_HAVE_MMIOTRACE_SUPPORT=y -# CONFIG_X86_DECODER_SELFTEST is not set -CONFIG_IO_DELAY_TYPE_0X80=0 -CONFIG_IO_DELAY_TYPE_0XED=1 -CONFIG_IO_DELAY_TYPE_UDELAY=2 -CONFIG_IO_DELAY_TYPE_NONE=3 -CONFIG_IO_DELAY_0X80=y -# CONFIG_IO_DELAY_0XED is not set -# CONFIG_IO_DELAY_UDELAY is not set -# CONFIG_IO_DELAY_NONE is not set -CONFIG_DEFAULT_IO_DELAY_TYPE=0 -# CONFIG_DEBUG_BOOT_PARAMS is not set -# CONFIG_CPA_DEBUG is not set -# CONFIG_OPTIMIZE_INLINING is not set -# CONFIG_DEBUG_ENTRY is not set -# CONFIG_DEBUG_NMI_SELFTEST is not set -CONFIG_X86_DEBUG_FPU=y -# CONFIG_PUNIT_ATOM_DEBUG is not set -CONFIG_UNWINDER_ORC=y -# CONFIG_UNWINDER_FRAME_POINTER is not set - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_COMPAT=y -CONFIG_PERSISTENT_KEYRINGS=y -# CONFIG_BIG_KEYS is not set -CONFIG_TRUSTED_KEYS=m -CONFIG_ENCRYPTED_KEYS=m -# CONFIG_KEY_DH_OPERATIONS is not set -CONFIG_SECURITY_DMESG_RESTRICT=y -CONFIG_SECURITY_PERF_EVENTS_RESTRICT=y -CONFIG_SECURITY_TIOCSTI_RESTRICT=y -CONFIG_SECURITY=y -# CONFIG_SECURITY_WRITABLE_HOOKS is not set -CONFIG_SECURITYFS=y -CONFIG_SECURITY_NETWORK=y -CONFIG_PAGE_TABLE_ISOLATION=y -# CONFIG_SECURITY_INFINIBAND is not set -# CONFIG_SECURITY_NETWORK_XFRM is not set -CONFIG_SECURITY_PATH=y -CONFIG_INTEL_TXT=y -CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y -CONFIG_HARDENED_USERCOPY=y -CONFIG_FORTIFY_SOURCE=y -CONFIG_PAGE_SANITIZE=y -CONFIG_PAGE_SANITIZE_VERIFY=y -# CONFIG_STATIC_USERMODEHELPER is not set -# CONFIG_SECURITY_SELINUX is not set -# CONFIG_SECURITY_SMACK is not set -# CONFIG_SECURITY_TOMOYO is not set -CONFIG_SECURITY_APPARMOR=y -CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 -CONFIG_SECURITY_APPARMOR_HASH=y -CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y -# CONFIG_SECURITY_APPARMOR_DEBUG is not set -# CONFIG_SECURITY_LOADPIN is not set -CONFIG_SECURITY_YAMA=y -# CONFIG_INTEGRITY is not set -CONFIG_DEFAULT_SECURITY_APPARMOR=y -# CONFIG_DEFAULT_SECURITY_DAC is not set -CONFIG_DEFAULT_SECURITY="apparmor" -CONFIG_XOR_BLOCKS=m -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m -CONFIG_ASYNC_PQ=m -CONFIG_ASYNC_RAID6_RECOV=m -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=m -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=m -CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_AKCIPHER=y -CONFIG_CRYPTO_KPP2=y -CONFIG_CRYPTO_KPP=m -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_RSA=y -CONFIG_CRYPTO_DH=m -CONFIG_CRYPTO_ECDH=m -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_USER=m -CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_PCRYPT=m -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m -CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_ABLK_HELPER=m -CONFIG_CRYPTO_SIMD=m -CONFIG_CRYPTO_GLUE_HELPER_X86=m -CONFIG_CRYPTO_ENGINE=m - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_CHACHA20POLY1305=m -CONFIG_CRYPTO_SEQIV=m -CONFIG_CRYPTO_ECHAINIV=m - -# -# Block modes -# -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_CTR=m -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_KEYWRAP=m - -# -# Hash modes -# -CONFIG_CRYPTO_CMAC=m -CONFIG_CRYPTO_HMAC=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CRC32C_INTEL=m -CONFIG_CRYPTO_CRC32=m -CONFIG_CRYPTO_CRC32_PCLMUL=m -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m -CONFIG_CRYPTO_GHASH=m -CONFIG_CRYPTO_POLY1305=m -CONFIG_CRYPTO_POLY1305_X86_64=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA1_SSSE3=m -CONFIG_CRYPTO_SHA256_SSSE3=m -CONFIG_CRYPTO_SHA512_SSSE3=m -CONFIG_CRYPTO_SHA1_MB=m -CONFIG_CRYPTO_SHA256_MB=m -CONFIG_CRYPTO_SHA512_MB=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_SHA3=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_AES_TI=m -CONFIG_CRYPTO_AES_X86_64=m -CONFIG_CRYPTO_AES_NI_INTEL=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_BLOWFISH_COMMON=m -CONFIG_CRYPTO_BLOWFISH_X86_64=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAMELLIA_X86_64=m -CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m -CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m -CONFIG_CRYPTO_CAST_COMMON=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST5_AVX_X86_64=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_CAST6_AVX_X86_64=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_DES3_EDE_X86_64=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_CHACHA20=m -CONFIG_CRYPTO_CHACHA20_X86_64=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m -CONFIG_CRYPTO_SERPENT_AVX_X86_64=m -CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_TWOFISH_X86_64=m -CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m -CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_842=m -CONFIG_CRYPTO_LZ4=m -CONFIG_CRYPTO_LZ4HC=m - -# -# Random Number Generation -# -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_DRBG_MENU=m -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_HASH=y -CONFIG_CRYPTO_DRBG_CTR=y -CONFIG_CRYPTO_DRBG=m -CONFIG_CRYPTO_JITTERENTROPY=m -CONFIG_CRYPTO_USER_API=m -CONFIG_CRYPTO_USER_API_HASH=m -CONFIG_CRYPTO_USER_API_SKCIPHER=m -CONFIG_CRYPTO_USER_API_RNG=m -CONFIG_CRYPTO_USER_API_AEAD=m -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_DEV_PADLOCK=m -CONFIG_CRYPTO_DEV_PADLOCK_AES=m -CONFIG_CRYPTO_DEV_PADLOCK_SHA=m -# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set -CONFIG_CRYPTO_DEV_CCP=y -CONFIG_CRYPTO_DEV_CCP_DD=m -CONFIG_CRYPTO_DEV_SP_CCP=y -CONFIG_CRYPTO_DEV_CCP_CRYPTO=m -CONFIG_CRYPTO_DEV_QAT=m -CONFIG_CRYPTO_DEV_QAT_DH895xCC=m -CONFIG_CRYPTO_DEV_QAT_C3XXX=m -CONFIG_CRYPTO_DEV_QAT_C62X=m -CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m -CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m -CONFIG_CRYPTO_DEV_QAT_C62XVF=m -CONFIG_CRYPTO_DEV_NITROX=m -CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m -CONFIG_CRYPTO_DEV_CHELSIO=m -CONFIG_CRYPTO_DEV_VIRTIO=m -CONFIG_ASYMMETRIC_KEY_TYPE=y -CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y -CONFIG_X509_CERTIFICATE_PARSER=y -CONFIG_PKCS7_MESSAGE_PARSER=y -# CONFIG_PKCS7_TEST_KEY is not set -# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set - -# -# Certificates for signature checking -# -CONFIG_MODULE_SIG_KEY="certs/signing_key.pem" -CONFIG_SYSTEM_TRUSTED_KEYRING=y -CONFIG_SYSTEM_TRUSTED_KEYS="" -# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set -CONFIG_SECONDARY_TRUSTED_KEYRING=y -CONFIG_SYSTEM_BLACKLIST_KEYRING=y -CONFIG_SYSTEM_BLACKLIST_HASH_LIST="" -CONFIG_HAVE_KVM=y -CONFIG_HAVE_KVM_IRQCHIP=y -CONFIG_HAVE_KVM_IRQFD=y -CONFIG_HAVE_KVM_IRQ_ROUTING=y -CONFIG_HAVE_KVM_EVENTFD=y -CONFIG_KVM_MMIO=y -CONFIG_KVM_ASYNC_PF=y -CONFIG_HAVE_KVM_MSI=y -CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y -CONFIG_KVM_VFIO=y -CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y -CONFIG_KVM_COMPAT=y -CONFIG_HAVE_KVM_IRQ_BYPASS=y -CONFIG_VIRTUALIZATION=y -CONFIG_KVM=m -CONFIG_KVM_INTEL=m -CONFIG_KVM_AMD=m -# CONFIG_KVM_MMU_AUDIT is not set -CONFIG_VHOST_NET=m -CONFIG_VHOST_SCSI=m -CONFIG_VHOST_VSOCK=m -CONFIG_VHOST=m -# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set -CONFIG_BINARY_PRINTF=y - -# -# Library routines -# -CONFIG_RAID6_PQ=m -CONFIG_BITREVERSE=y -# CONFIG_HAVE_ARCH_BITREVERSE is not set -CONFIG_RATIONAL=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_NET_UTILS=y -CONFIG_GENERIC_FIND_FIRST_BIT=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_IO=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_HAS_FAST_MULTIPLIER=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC32_SELFTEST is not set -CONFIG_CRC32_SLICEBY8=y -# CONFIG_CRC32_SLICEBY4 is not set -# CONFIG_CRC32_SARWATE is not set -# CONFIG_CRC32_BIT is not set -CONFIG_CRC4=m -CONFIG_CRC7=m -CONFIG_LIBCRC32C=m -CONFIG_CRC8=m -CONFIG_XXHASH=m -# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set -# CONFIG_RANDOM32_SELFTEST is not set -CONFIG_842_COMPRESS=m -CONFIG_842_DECOMPRESS=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_LZ4_COMPRESS=y -CONFIG_LZ4HC_COMPRESS=m -CONFIG_LZ4_DECOMPRESS=y -CONFIG_ZSTD_COMPRESS=m -CONFIG_ZSTD_DECOMPRESS=m -CONFIG_XZ_DEC=y -CONFIG_XZ_DEC_X86=y -CONFIG_XZ_DEC_POWERPC=y -CONFIG_XZ_DEC_IA64=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_SPARC=y -CONFIG_XZ_DEC_BCJ=y -# CONFIG_XZ_DEC_TEST is not set -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_REED_SOLOMON=m -CONFIG_REED_SOLOMON_ENC8=y -CONFIG_REED_SOLOMON_DEC8=y -CONFIG_REED_SOLOMON_DEC16=y -CONFIG_BCH=m -CONFIG_BCH_CONST_PARAMS=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_BTREE=y -CONFIG_INTERVAL_TREE=y -CONFIG_RADIX_TREE_MULTIORDER=y -CONFIG_ASSOCIATIVE_ARRAY=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAS_DMA=y -# CONFIG_DMA_NOOP_OPS is not set -CONFIG_DMA_VIRT_OPS=y -CONFIG_CHECK_SIGNATURE=y -CONFIG_CPUMASK_OFFSTACK=y -CONFIG_CPU_RMAP=y -CONFIG_DQL=y -CONFIG_GLOB=y -# CONFIG_GLOB_SELFTEST is not set -CONFIG_NLATTR=y -CONFIG_LRU_CACHE=m -CONFIG_CLZ_TAB=y -CONFIG_CORDIC=m -CONFIG_DDR=y -CONFIG_IRQ_POLL=y -CONFIG_MPILIB=y -CONFIG_OID_REGISTRY=y -CONFIG_UCS2_STRING=y -CONFIG_FONT_SUPPORT=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_6x10 is not set -# CONFIG_FONT_10x18 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_SG_SPLIT is not set -CONFIG_SG_POOL=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_PMEM_API=y -CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y -CONFIG_SBITMAP=y -CONFIG_PARMAN=m -# CONFIG_STRING_SELFTEST is not set diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-introduce-NUMA-identity-node-sched-domain.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-introduce-NUMA-identity-node-sched-domain.patch deleted file mode 100644 index 2376edae..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-introduce-NUMA-identity-node-sched-domain.patch +++ /dev/null @@ -1,46 +0,0 @@ -diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c -index 808998fe1..18d3321ef 100644 ---- a/kernel/sched/topology.c -+++ b/kernel/sched/topology.c -@@ -1339,6 +1339,10 @@ void sched_init_numa(void) - if (!sched_domains_numa_distance) - return; - -+ /* Includes NUMA identity node at level 0. */ -+ sched_domains_numa_distance[level++] = curr_distance; -+ sched_domains_numa_levels = level; -+ - /* - * O(nr_nodes^2) deduplicating selection sort -- in order to find the - * unique distances in the node_distance() table. -@@ -1386,8 +1390,7 @@ void sched_init_numa(void) - return; - - /* -- * 'level' contains the number of unique distances, excluding the -- * identity distance node_distance(i,i). -+ * 'level' contains the number of unique distances - * - * The sched_domains_numa_distance[] array includes the actual distance - * numbers. -@@ -1448,10 +1451,19 @@ void sched_init_numa(void) - for (i = 0; sched_domain_topology[i].mask; i++) - tl[i] = sched_domain_topology[i]; - -+ /* -+ * Add the NUMA identity distance, aka single NODE. -+ */ -+ tl[i++] = (struct sched_domain_topology_level){ -+ .mask = sd_numa_mask, -+ .numa_level = 0, -+ SD_INIT_NAME(NODE) -+ }; -+ - /* - * .. and append 'j' levels of NUMA goodness. - */ -- for (j = 0; j < level; i++, j++) { -+ for (j = 1; j < level; i++, j++) { - tl[i] = (struct sched_domain_topology_level){ - .mask = sd_numa_mask, - .sd_flags = cpu_numa_flags, diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-k10temp-add-ZEN-support.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-k10temp-add-ZEN-support.patch deleted file mode 100644 index b1e8a9b0..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-k10temp-add-ZEN-support.patch +++ /dev/null @@ -1,177 +0,0 @@ -diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c -index ce3b91f22..0721e1756 100644 ---- a/drivers/hwmon/k10temp.c -+++ b/drivers/hwmon/k10temp.c -@@ -36,6 +36,10 @@ MODULE_PARM_DESC(force, "force loading on processors with erratum 319"); - /* Provide lock for writing to NB_SMU_IND_ADDR */ - static DEFINE_MUTEX(nb_smu_ind_mutex); - -+#ifndef PCI_DEVICE_ID_AMD_17H_DF_F3 -+#define PCI_DEVICE_ID_AMD_17H_DF_F3 0x1463 -+#endif -+ - /* CPUID function 0x80000001, ebx */ - #define CPUID_PKGTYPE_MASK 0xf0000000 - #define CPUID_PKGTYPE_F 0x00000000 -@@ -61,31 +65,72 @@ static DEFINE_MUTEX(nb_smu_ind_mutex); - */ - #define F15H_M60H_REPORTED_TEMP_CTRL_OFFSET 0xd8200ca4 - --static void amd_nb_smu_index_read(struct pci_dev *pdev, unsigned int devfn, -- int offset, u32 *val) -+/* F17h M01h Access througn SMN */ -+#define F17H_M01H_REPORTED_TEMP_CTRL_OFFSET 0x00059800 -+ -+struct k10temp_data { -+ struct pci_dev *pdev; -+ void (*read_tempreg)(struct pci_dev *pdev, u32 *regval); -+ int temp_offset; -+}; -+ -+struct tctl_offset { -+ u8 model; -+ char const *id; -+ int offset; -+}; -+ -+static const struct tctl_offset tctl_offset_table[] = { -+ { 0x17, "AMD Ryzen 5 1600X", 20000 }, -+ { 0x17, "AMD Ryzen 7 1700X", 20000 }, -+ { 0x17, "AMD Ryzen 7 1800X", 20000 }, -+ { 0x17, "AMD Ryzen Threadripper 1950X", 27000 }, -+ { 0x17, "AMD Ryzen Threadripper 1920X", 27000 }, -+ { 0x17, "AMD Ryzen Threadripper 1950", 10000 }, -+ { 0x17, "AMD Ryzen Threadripper 1920", 10000 }, -+ { 0x17, "AMD Ryzen Threadripper 1910", 10000 }, -+}; -+ -+static void read_tempreg_pci(struct pci_dev *pdev, u32 *regval) -+{ -+ pci_read_config_dword(pdev, REG_REPORTED_TEMPERATURE, regval); -+} -+ -+static void amd_nb_index_read(struct pci_dev *pdev, unsigned int devfn, -+ unsigned int base, int offset, u32 *val) - { - mutex_lock(&nb_smu_ind_mutex); - pci_bus_write_config_dword(pdev->bus, devfn, -- 0xb8, offset); -+ base, offset); - pci_bus_read_config_dword(pdev->bus, devfn, -- 0xbc, val); -+ base + 4, val); - mutex_unlock(&nb_smu_ind_mutex); - } - -+static void read_tempreg_nb_f15(struct pci_dev *pdev, u32 *regval) -+{ -+ amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8, -+ F15H_M60H_REPORTED_TEMP_CTRL_OFFSET, regval); -+} -+ -+static void read_tempreg_nb_f17(struct pci_dev *pdev, u32 *regval) -+{ -+ amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0x60, -+ F17H_M01H_REPORTED_TEMP_CTRL_OFFSET, regval); -+} -+ - static ssize_t temp1_input_show(struct device *dev, - struct device_attribute *attr, char *buf) - { -+ struct k10temp_data *data = dev_get_drvdata(dev); - u32 regval; -- struct pci_dev *pdev = dev_get_drvdata(dev); -- -- if (boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model == 0x60) { -- amd_nb_smu_index_read(pdev, PCI_DEVFN(0, 0), -- F15H_M60H_REPORTED_TEMP_CTRL_OFFSET, -- ®val); -- } else { -- pci_read_config_dword(pdev, REG_REPORTED_TEMPERATURE, ®val); -- } -- return sprintf(buf, "%u\n", (regval >> 21) * 125); -+ unsigned int temp; -+ -+ data->read_tempreg(data->pdev, ®val); -+ temp = (regval >> 21) * 125; -+ temp -= data->temp_offset; -+ -+ return sprintf(buf, "%u\n", temp); - } - - static ssize_t temp1_max_show(struct device *dev, -@@ -98,11 +143,12 @@ static ssize_t show_temp_crit(struct device *dev, - struct device_attribute *devattr, char *buf) - { - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); -+ struct k10temp_data *data = dev_get_drvdata(dev); - int show_hyst = attr->index; - u32 regval; - int value; - -- pci_read_config_dword(dev_get_drvdata(dev), -+ pci_read_config_dword(data->pdev, - REG_HARDWARE_THERMAL_CONTROL, ®val); - value = ((regval >> 16) & 0x7f) * 500 + 52000; - if (show_hyst) -@@ -119,7 +165,8 @@ static umode_t k10temp_is_visible(struct kobject *kobj, - struct attribute *attr, int index) - { - struct device *dev = container_of(kobj, struct device, kobj); -- struct pci_dev *pdev = dev_get_drvdata(dev); -+ struct k10temp_data *data = dev_get_drvdata(dev); -+ struct pci_dev *pdev = data->pdev; - - if (index >= 2) { - u32 reg_caps, reg_htc; -@@ -187,7 +234,9 @@ static int k10temp_probe(struct pci_dev *pdev, - { - int unreliable = has_erratum_319(pdev); - struct device *dev = &pdev->dev; -+ struct k10temp_data *data; - struct device *hwmon_dev; -+ int i; - - if (unreliable) { - if (!force) { -@@ -199,7 +248,31 @@ static int k10temp_probe(struct pci_dev *pdev, - "unreliable CPU thermal sensor; check erratum 319\n"); - } - -- hwmon_dev = devm_hwmon_device_register_with_groups(dev, "k10temp", pdev, -+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); -+ if (!data) -+ return -ENOMEM; -+ -+ data->pdev = pdev; -+ -+ if (boot_cpu_data.x86 == 0x15 && (boot_cpu_data.x86_model == 0x60 || -+ boot_cpu_data.x86_model == 0x70)) -+ data->read_tempreg = read_tempreg_nb_f15; -+ else if (boot_cpu_data.x86 == 0x17) -+ data->read_tempreg = read_tempreg_nb_f17; -+ else -+ data->read_tempreg = read_tempreg_pci; -+ -+ for (i = 0; i < ARRAY_SIZE(tctl_offset_table); i++) { -+ const struct tctl_offset *entry = &tctl_offset_table[i]; -+ -+ if (boot_cpu_data.x86 == entry->model && -+ strstr(boot_cpu_data.x86_model_id, entry->id)) { -+ data->temp_offset = entry->offset; -+ break; -+ } -+ } -+ -+ hwmon_dev = devm_hwmon_device_register_with_groups(dev, "k10temp", data, - k10temp_groups); - return PTR_ERR_OR_ZERO(hwmon_dev); - } -@@ -214,6 +287,7 @@ static const struct pci_device_id k10temp_id_table[] = { - { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F3) }, - { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) }, - { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) }, -+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_DF_F3) }, - {} - }; - MODULE_DEVICE_TABLE(pci, k10temp_id_table); diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-linux-hardened.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-linux-hardened.patch deleted file mode 100644 index 9280791e..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-linux-hardened.patch +++ /dev/null @@ -1,2868 +0,0 @@ -diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt -index 7d8b17ce8804..7e4f071c3bf2 100644 ---- a/Documentation/admin-guide/kernel-parameters.txt -+++ b/Documentation/admin-guide/kernel-parameters.txt -@@ -490,16 +490,6 @@ - nosocket -- Disable socket memory accounting. - nokmem -- Disable kernel memory accounting. - -- checkreqprot [SELINUX] Set initial checkreqprot flag value. -- Format: { "0" | "1" } -- See security/selinux/Kconfig help text. -- 0 -- check protection applied by kernel (includes -- any implied execute protection). -- 1 -- check protection requested by application. -- Default value is set via a kernel config option. -- Value can be changed at runtime via -- /selinux/checkreqprot. -- - cio_ignore= [S390] - See Documentation/s390/CommonIO for details. - clk_ignore_unused -@@ -2984,6 +2974,11 @@ - the specified number of seconds. This is to be used if - your oopses keep scrolling off the screen. - -+ extra_latent_entropy -+ Enable a very simple form of latent entropy extraction -+ from the first 4GB of memory as the bootmem allocator -+ passes the memory pages to the buddy allocator. -+ - pcbit= [HW,ISDN] - - pcd. [PARIDE] -diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt -index 694968c7523c..002d86416ef8 100644 ---- a/Documentation/sysctl/kernel.txt -+++ b/Documentation/sysctl/kernel.txt -@@ -91,6 +91,7 @@ show up in /proc/sys/kernel: - - sysctl_writes_strict - - tainted - - threads-max -+- tiocsti_restrict - - unknown_nmi_panic - - watchdog - - watchdog_thresh -@@ -999,6 +1000,26 @@ available RAM pages threads-max is reduced accordingly. - - ============================================================== - -+tiocsti_restrict: -+ -+This toggle indicates whether unprivileged users are prevented -+from using the TIOCSTI ioctl to inject commands into other processes -+which share a tty session. -+ -+When tiocsti_restrict is set to (0) there are no restrictions(accept -+the default restriction of only being able to injection commands into -+one's own tty). When tiocsti_restrict is set to (1), users must -+have CAP_SYS_ADMIN to use the TIOCSTI ioctl. -+ -+When user namespaces are in use, the check for the capability -+CAP_SYS_ADMIN is done against the user namespace that originally -+opened the tty. -+ -+The kernel config option CONFIG_SECURITY_TIOCSTI_RESTRICT sets the -+default value of tiocsti_restrict. -+ -+============================================================== -+ - unknown_nmi_panic: - - The value in this file affects behavior of handling NMI. When the -diff --git a/Makefile b/Makefile -index 70cc37cb3e99..edc3de99b3cd 100644 ---- a/Makefile -+++ b/Makefile -@@ -714,6 +714,9 @@ endif - KBUILD_CFLAGS += $(stackp-flag) - - ifeq ($(cc-name),clang) -+ifdef CONFIG_LOCAL_INIT -+KBUILD_CFLAGS += -fsanitize=local-init -+endif - KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,) - KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier) - KBUILD_CFLAGS += $(call cc-disable-warning, gnu) -diff --git a/arch/Kconfig b/arch/Kconfig -index 77b3e21c4844..3dff252446ac 100644 ---- a/arch/Kconfig -+++ b/arch/Kconfig -@@ -446,6 +446,11 @@ config GCC_PLUGIN_LATENT_ENTROPY - is some slowdown of the boot process (about 0.5%) and fork and - irq processing. - -+ When extra_latent_entropy is passed on the kernel command line, -+ entropy will be extracted from up to the first 4GB of RAM while the -+ runtime memory allocator is being initialized. This costs even more -+ slowdown of the boot process. -+ - Note that entropy extracted this way is not cryptographically - secure! - -@@ -539,7 +544,7 @@ config CC_STACKPROTECTOR - choice - prompt "Stack Protector buffer overflow detection" - depends on HAVE_CC_STACKPROTECTOR -- default CC_STACKPROTECTOR_NONE -+ default CC_STACKPROTECTOR_STRONG - help - This option turns on the "stack-protector" GCC feature. This - feature puts, at the beginning of functions, a canary value on -@@ -741,7 +746,7 @@ config ARCH_MMAP_RND_BITS - int "Number of bits to use for ASLR of mmap base address" if EXPERT - range ARCH_MMAP_RND_BITS_MIN ARCH_MMAP_RND_BITS_MAX - default ARCH_MMAP_RND_BITS_DEFAULT if ARCH_MMAP_RND_BITS_DEFAULT -- default ARCH_MMAP_RND_BITS_MIN -+ default ARCH_MMAP_RND_BITS_MAX - depends on HAVE_ARCH_MMAP_RND_BITS - help - This value can be used to select the number of bits to use to -@@ -775,7 +780,7 @@ config ARCH_MMAP_RND_COMPAT_BITS - int "Number of bits to use for ASLR of mmap base address for compatible applications" if EXPERT - range ARCH_MMAP_RND_COMPAT_BITS_MIN ARCH_MMAP_RND_COMPAT_BITS_MAX - default ARCH_MMAP_RND_COMPAT_BITS_DEFAULT if ARCH_MMAP_RND_COMPAT_BITS_DEFAULT -- default ARCH_MMAP_RND_COMPAT_BITS_MIN -+ default ARCH_MMAP_RND_COMPAT_BITS_MAX - depends on HAVE_ARCH_MMAP_RND_COMPAT_BITS - help - This value can be used to select the number of bits to use to -@@ -958,6 +963,7 @@ config ARCH_HAS_REFCOUNT - - config REFCOUNT_FULL - bool "Perform full reference count validation at the expense of speed" -+ default y - help - Enabling this switches the refcounting infrastructure from a fast - unchecked atomic_t implementation to a fully state checked -diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig -index c30cd78b6918..ba32a283f027 100644 ---- a/arch/arm64/Kconfig -+++ b/arch/arm64/Kconfig -@@ -926,6 +926,7 @@ endif - - config ARM64_SW_TTBR0_PAN - bool "Emulate Privileged Access Never using TTBR0_EL1 switching" -+ default y - help - Enabling this option prevents the kernel from accessing - user-space memory directly by pointing TTBR0_EL1 to a reserved -@@ -1052,6 +1053,7 @@ config RANDOMIZE_BASE - bool "Randomize the address of the kernel image" - select ARM64_MODULE_PLTS if MODULES - select RELOCATABLE -+ default y - help - Randomizes the virtual address at which the kernel image is - loaded, as a security feature that deters exploit attempts -diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug -index cc6bd559af85..01d5442d4722 100644 ---- a/arch/arm64/Kconfig.debug -+++ b/arch/arm64/Kconfig.debug -@@ -45,6 +45,7 @@ config ARM64_RANDOMIZE_TEXT_OFFSET - config DEBUG_WX - bool "Warn on W+X mappings at boot" - select ARM64_PTDUMP_CORE -+ default y - ---help--- - Generate a warning if any W+X mappings are found at boot. - -diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig -index b05796578e7a..8f6e2099717d 100644 ---- a/arch/arm64/configs/defconfig -+++ b/arch/arm64/configs/defconfig -@@ -1,4 +1,3 @@ --CONFIG_SYSVIPC=y - CONFIG_POSIX_MQUEUE=y - CONFIG_AUDIT=y - CONFIG_NO_HZ_IDLE=y -diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h -index 33be513ef24c..6f0c0e3ef0dd 100644 ---- a/arch/arm64/include/asm/elf.h -+++ b/arch/arm64/include/asm/elf.h -@@ -114,10 +114,10 @@ - - /* - * This is the base location for PIE (ET_DYN with INTERP) loads. On -- * 64-bit, this is above 4GB to leave the entire 32-bit address -+ * 64-bit, this is raised to 4GB to leave the entire 32-bit address - * space open for things that want to use the area for 32-bit pointers. - */ --#define ELF_ET_DYN_BASE (2 * TASK_SIZE_64 / 3) -+#define ELF_ET_DYN_BASE 0x100000000UL - - #ifndef __ASSEMBLY__ - -@@ -158,10 +158,10 @@ extern int arch_setup_additional_pages(struct linux_binprm *bprm, - /* 1GB of VA */ - #ifdef CONFIG_COMPAT - #define STACK_RND_MASK (test_thread_flag(TIF_32BIT) ? \ -- 0x7ff >> (PAGE_SHIFT - 12) : \ -- 0x3ffff >> (PAGE_SHIFT - 12)) -+ ((1UL << mmap_rnd_compat_bits) - 1) >> (PAGE_SHIFT - 12) : \ -+ ((1UL << mmap_rnd_bits) - 1) >> (PAGE_SHIFT - 12)) - #else --#define STACK_RND_MASK (0x3ffff >> (PAGE_SHIFT - 12)) -+#define STACK_RND_MASK (((1UL << mmap_rnd_bits) - 1) >> (PAGE_SHIFT - 12)) - #endif - - #ifdef __AARCH64EB__ -diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c -index 9e773732520c..91359f45b5fc 100644 ---- a/arch/arm64/kernel/process.c -+++ b/arch/arm64/kernel/process.c -@@ -419,9 +419,9 @@ unsigned long arch_align_stack(unsigned long sp) - unsigned long arch_randomize_brk(struct mm_struct *mm) - { - if (is_compat_task()) -- return randomize_page(mm->brk, SZ_32M); -+ return mm->brk + get_random_long() % SZ_32M + PAGE_SIZE; - else -- return randomize_page(mm->brk, SZ_1G); -+ return mm->brk + get_random_long() % SZ_1G + PAGE_SIZE; - } - - /* -diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig -index 4f393eb9745f..1a31f8fc82ed 100644 ---- a/arch/x86/Kconfig -+++ b/arch/x86/Kconfig -@@ -1145,8 +1145,7 @@ config VM86 - default X86_LEGACY_VM86 - - config X86_16BIT -- bool "Enable support for 16-bit segments" if EXPERT -- default y -+ bool "Enable support for 16-bit segments" - depends on MODIFY_LDT_SYSCALL - ---help--- - This option is required by programs like Wine to run 16-bit -@@ -2220,7 +2219,7 @@ config COMPAT_VDSO - choice - prompt "vsyscall table for legacy applications" - depends on X86_64 -- default LEGACY_VSYSCALL_EMULATE -+ default LEGACY_VSYSCALL_NONE - help - Legacy user code that does not know how to find the vDSO expects - to be able to issue three syscalls by calling fixed addresses in -@@ -2310,8 +2309,7 @@ config CMDLINE_OVERRIDE - be set to 'N' under normal conditions. - - config MODIFY_LDT_SYSCALL -- bool "Enable the LDT (local descriptor table)" if EXPERT -- default y -+ bool "Enable the LDT (local descriptor table)" - ---help--- - Linux can allow user programs to install a per-process x86 - Local Descriptor Table (LDT) using the modify_ldt(2) system -diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug -index 6293a8768a91..add82e0f1df3 100644 ---- a/arch/x86/Kconfig.debug -+++ b/arch/x86/Kconfig.debug -@@ -101,6 +101,7 @@ config EFI_PGT_DUMP - config DEBUG_WX - bool "Warn on W+X mappings at boot" - select X86_PTDUMP_CORE -+ default y - ---help--- - Generate a warning if any W+X mappings are found at boot. - -diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig -index e32fc1f274d8..d08acc76502a 100644 ---- a/arch/x86/configs/x86_64_defconfig -+++ b/arch/x86/configs/x86_64_defconfig -@@ -1,5 +1,4 @@ - # CONFIG_LOCALVERSION_AUTO is not set --CONFIG_SYSVIPC=y - CONFIG_POSIX_MQUEUE=y - CONFIG_BSD_PROCESS_ACCT=y - CONFIG_TASKSTATS=y -diff --git a/arch/x86/entry/vdso/vma.c b/arch/x86/entry/vdso/vma.c -index 1911310959f8..bba8dbbc07a8 100644 ---- a/arch/x86/entry/vdso/vma.c -+++ b/arch/x86/entry/vdso/vma.c -@@ -203,55 +203,9 @@ static int map_vdso(const struct vdso_image *image, unsigned long addr) - } - - #ifdef CONFIG_X86_64 --/* -- * Put the vdso above the (randomized) stack with another randomized -- * offset. This way there is no hole in the middle of address space. -- * To save memory make sure it is still in the same PTE as the stack -- * top. This doesn't give that many random bits. -- * -- * Note that this algorithm is imperfect: the distribution of the vdso -- * start address within a PMD is biased toward the end. -- * -- * Only used for the 64-bit and x32 vdsos. -- */ --static unsigned long vdso_addr(unsigned long start, unsigned len) --{ -- unsigned long addr, end; -- unsigned offset; -- -- /* -- * Round up the start address. It can start out unaligned as a result -- * of stack start randomization. -- */ -- start = PAGE_ALIGN(start); -- -- /* Round the lowest possible end address up to a PMD boundary. */ -- end = (start + len + PMD_SIZE - 1) & PMD_MASK; -- if (end >= TASK_SIZE_MAX) -- end = TASK_SIZE_MAX; -- end -= len; -- -- if (end > start) { -- offset = get_random_int() % (((end - start) >> PAGE_SHIFT) + 1); -- addr = start + (offset << PAGE_SHIFT); -- } else { -- addr = start; -- } -- -- /* -- * Forcibly align the final address in case we have a hardware -- * issue that requires alignment for performance reasons. -- */ -- addr = align_vdso_addr(addr); -- -- return addr; --} -- - static int map_vdso_randomized(const struct vdso_image *image) - { -- unsigned long addr = vdso_addr(current->mm->start_stack, image->size-image->sym_vvar_start); -- -- return map_vdso(image, addr); -+ return map_vdso(image, 0); - } - #endif - -diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h -index 3a091cea36c5..0931c05a3348 100644 ---- a/arch/x86/include/asm/elf.h -+++ b/arch/x86/include/asm/elf.h -@@ -249,11 +249,11 @@ extern int force_personality32; - - /* - * This is the base location for PIE (ET_DYN with INTERP) loads. On -- * 64-bit, this is above 4GB to leave the entire 32-bit address -+ * 64-bit, this is raised to 4GB to leave the entire 32-bit address - * space open for things that want to use the area for 32-bit pointers. - */ - #define ELF_ET_DYN_BASE (mmap_is_ia32() ? 0x000400000UL : \ -- (DEFAULT_MAP_WINDOW / 3 * 2)) -+ 0x100000000UL) - - /* This yields a mask that user programs can use to figure out what - instruction set this CPU supports. This could be done in user space, -@@ -312,8 +312,8 @@ extern unsigned long get_mmap_base(int is_legacy); - - #ifdef CONFIG_X86_32 - --#define __STACK_RND_MASK(is32bit) (0x7ff) --#define STACK_RND_MASK (0x7ff) -+#define __STACK_RND_MASK(is32bit) ((1UL << mmap_rnd_bits) - 1) -+#define STACK_RND_MASK ((1UL << mmap_rnd_bits) - 1) - - #define ARCH_DLINFO ARCH_DLINFO_IA32 - -@@ -322,7 +322,11 @@ extern unsigned long get_mmap_base(int is_legacy); - #else /* CONFIG_X86_32 */ - - /* 1GB for 64bit, 8MB for 32bit */ --#define __STACK_RND_MASK(is32bit) ((is32bit) ? 0x7ff : 0x3fffff) -+#ifdef CONFIG_COMPAT -+#define __STACK_RND_MASK(is32bit) ((is32bit) ? (1UL << mmap_rnd_compat_bits) - 1 : (1UL << mmap_rnd_bits) - 1) -+#else -+#define __STACK_RND_MASK(is32bit) ((1UL << mmap_rnd_bits) - 1) -+#endif - #define STACK_RND_MASK __STACK_RND_MASK(mmap_is_ia32()) - - #define ARCH_DLINFO \ -@@ -380,5 +384,4 @@ struct va_alignment { - } ____cacheline_aligned; - - extern struct va_alignment va_align; --extern unsigned long align_vdso_addr(unsigned long); - #endif /* _ASM_X86_ELF_H */ -diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h -index e31040333f0c..14f3f214c9d1 100644 ---- a/arch/x86/include/asm/tlbflush.h -+++ b/arch/x86/include/asm/tlbflush.h -@@ -302,6 +302,7 @@ static inline void cr4_set_bits(unsigned long mask) - unsigned long cr4; - - cr4 = this_cpu_read(cpu_tlbstate.cr4); -+ BUG_ON(cr4 != __read_cr4()); - if ((cr4 | mask) != cr4) { - cr4 |= mask; - this_cpu_write(cpu_tlbstate.cr4, cr4); -@@ -315,6 +316,7 @@ static inline void cr4_clear_bits(unsigned long mask) - unsigned long cr4; - - cr4 = this_cpu_read(cpu_tlbstate.cr4); -+ BUG_ON(cr4 != __read_cr4()); - if ((cr4 & ~mask) != cr4) { - cr4 &= ~mask; - this_cpu_write(cpu_tlbstate.cr4, cr4); -@@ -327,6 +329,7 @@ static inline void cr4_toggle_bits(unsigned long mask) - unsigned long cr4; - - cr4 = this_cpu_read(cpu_tlbstate.cr4); -+ BUG_ON(cr4 != __read_cr4()); - cr4 ^= mask; - this_cpu_write(cpu_tlbstate.cr4, cr4); - __write_cr4(cr4); -@@ -435,6 +438,7 @@ static inline void __native_flush_tlb_global(void) - raw_local_irq_save(flags); - - cr4 = this_cpu_read(cpu_tlbstate.cr4); -+ BUG_ON(cr4 != __read_cr4()); - /* toggle PGE */ - native_write_cr4(cr4 ^ X86_CR4_PGE); - /* write old PGE again and flush TLBs */ -diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c -index 51e49f6fe8e1..7ee813033624 100644 ---- a/arch/x86/kernel/cpu/common.c -+++ b/arch/x86/kernel/cpu/common.c -@@ -1669,7 +1669,6 @@ void cpu_init(void) - wrmsrl(MSR_KERNEL_GS_BASE, 0); - barrier(); - -- x86_configure_nx(); - x2apic_setup(); - - /* -diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c -index a98d1cdd6299..7426eb5d1c03 100644 ---- a/arch/x86/kernel/process.c -+++ b/arch/x86/kernel/process.c -@@ -40,6 +40,8 @@ - #include - #include - #include -+#include -+#include - - #include "process.h" - -@@ -782,7 +784,10 @@ unsigned long arch_align_stack(unsigned long sp) - - unsigned long arch_randomize_brk(struct mm_struct *mm) - { -- return randomize_page(mm->brk, 0x02000000); -+ if (mmap_is_ia32()) -+ return mm->brk + get_random_long() % SZ_32M + PAGE_SIZE; -+ else -+ return mm->brk + get_random_long() % SZ_1G + PAGE_SIZE; - } - - /* -diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c -index a63fe77b3217..e1085e76043e 100644 ---- a/arch/x86/kernel/sys_x86_64.c -+++ b/arch/x86/kernel/sys_x86_64.c -@@ -54,13 +54,6 @@ static unsigned long get_align_bits(void) - return va_align.bits & get_align_mask(); - } - --unsigned long align_vdso_addr(unsigned long addr) --{ -- unsigned long align_mask = get_align_mask(); -- addr = (addr + align_mask) & ~align_mask; -- return addr | get_align_bits(); --} -- - static int __init control_va_addr_alignment(char *str) - { - /* guard against enabling this on other CPU families */ -@@ -122,10 +115,7 @@ static void find_start_end(unsigned long addr, unsigned long flags, - } - - *begin = get_mmap_base(1); -- if (in_compat_syscall()) -- *end = task_size_32bit(); -- else -- *end = task_size_64bit(addr > DEFAULT_MAP_WINDOW); -+ *end = get_mmap_base(0); - } - - unsigned long -@@ -206,7 +196,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, - - info.flags = VM_UNMAPPED_AREA_TOPDOWN; - info.length = len; -- info.low_limit = PAGE_SIZE; -+ info.low_limit = get_mmap_base(1); - info.high_limit = get_mmap_base(0); - - /* -diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c -index 3141e67ec24c..e93173193f60 100644 ---- a/arch/x86/mm/init_32.c -+++ b/arch/x86/mm/init_32.c -@@ -558,7 +558,7 @@ static void __init pagetable_init(void) - permanent_kmaps_init(pgd_base); - } - --pteval_t __supported_pte_mask __read_mostly = ~(_PAGE_NX | _PAGE_GLOBAL); -+pteval_t __supported_pte_mask __ro_after_init = ~(_PAGE_NX | _PAGE_GLOBAL); - EXPORT_SYMBOL_GPL(__supported_pte_mask); - - /* user-defined highmem size */ -@@ -865,7 +865,7 @@ int arch_remove_memory(u64 start, u64 size) - #endif - #endif - --int kernel_set_to_readonly __read_mostly; -+int kernel_set_to_readonly __ro_after_init; - - void set_kernel_text_rw(void) - { -@@ -917,12 +917,11 @@ void mark_rodata_ro(void) - unsigned long start = PFN_ALIGN(_text); - unsigned long size = PFN_ALIGN(_etext) - start; - -+ kernel_set_to_readonly = 1; - set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT); - printk(KERN_INFO "Write protecting the kernel text: %luk\n", - size >> 10); - -- kernel_set_to_readonly = 1; -- - #ifdef CONFIG_CPA_DEBUG - printk(KERN_INFO "Testing CPA: Reverting %lx-%lx\n", - start, start+size); -diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c -index 624edfbff02d..54bb0705dd53 100644 ---- a/arch/x86/mm/init_64.c -+++ b/arch/x86/mm/init_64.c -@@ -65,7 +65,7 @@ - * around without checking the pgd every time. - */ - --pteval_t __supported_pte_mask __read_mostly = ~0; -+pteval_t __supported_pte_mask __ro_after_init = ~0; - EXPORT_SYMBOL_GPL(__supported_pte_mask); - - int force_personality32; -@@ -1179,7 +1179,7 @@ void __init mem_init(void) - mem_init_print_info(NULL); - } - --int kernel_set_to_readonly; -+int kernel_set_to_readonly __ro_after_init; - - void set_kernel_text_rw(void) - { -@@ -1228,9 +1228,8 @@ void mark_rodata_ro(void) - - printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n", - (end - start) >> 10); -- set_memory_ro(start, (end - start) >> PAGE_SHIFT); -- - kernel_set_to_readonly = 1; -+ set_memory_ro(start, (end - start) >> PAGE_SHIFT); - - /* - * The rodata/data/bss/brk section (but not the kernel text!) -diff --git a/block/blk-softirq.c b/block/blk-softirq.c -index 01e2b353a2b9..9aeddca4a29f 100644 ---- a/block/blk-softirq.c -+++ b/block/blk-softirq.c -@@ -20,7 +20,7 @@ static DEFINE_PER_CPU(struct list_head, blk_cpu_done); - * Softirq action handler - move entries to local list and loop over them - * while passing them to the queue registered handler. - */ --static __latent_entropy void blk_done_softirq(struct softirq_action *h) -+static __latent_entropy void blk_done_softirq(void) - { - struct list_head *cpu_list, local_list; - -diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c -index 04f406d7e973..60d8c59fa824 100644 ---- a/drivers/ata/libata-core.c -+++ b/drivers/ata/libata-core.c -@@ -5148,7 +5148,7 @@ void ata_qc_free(struct ata_queued_cmd *qc) - struct ata_port *ap; - unsigned int tag; - -- WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ -+ BUG_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ - ap = qc->ap; - - qc->flags = 0; -@@ -5165,7 +5165,7 @@ void __ata_qc_complete(struct ata_queued_cmd *qc) - struct ata_port *ap; - struct ata_link *link; - -- WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ -+ BUG_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ - WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE)); - ap = qc->ap; - link = qc->dev->link; -diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig -index c28dca0c613d..d4813f0d25ca 100644 ---- a/drivers/char/Kconfig -+++ b/drivers/char/Kconfig -@@ -9,7 +9,6 @@ source "drivers/tty/Kconfig" - - config DEVMEM - bool "/dev/mem virtual device support" -- default y - help - Say Y here if you want to support the /dev/mem device. - The /dev/mem device is used to access areas of physical -@@ -568,7 +567,6 @@ config TELCLOCK - config DEVPORT - bool "/dev/port character device" - depends on ISA || PCI -- default y - help - Say Y here if you want to support the /dev/port device. The /dev/port - device is similar to /dev/mem, but for I/O ports. -diff --git a/drivers/media/dvb-frontends/cx24116.c b/drivers/media/dvb-frontends/cx24116.c -index e105532bfba8..e07d52bb9b62 100644 ---- a/drivers/media/dvb-frontends/cx24116.c -+++ b/drivers/media/dvb-frontends/cx24116.c -@@ -1462,7 +1462,7 @@ static int cx24116_tune(struct dvb_frontend *fe, bool re_tune, - return cx24116_read_status(fe, status); - } - --static int cx24116_get_algo(struct dvb_frontend *fe) -+static enum dvbfe_algo cx24116_get_algo(struct dvb_frontend *fe) - { - return DVBFE_ALGO_HW; - } -diff --git a/drivers/media/dvb-frontends/cx24117.c b/drivers/media/dvb-frontends/cx24117.c -index d37cb7762bd6..97e0feff0ede 100644 ---- a/drivers/media/dvb-frontends/cx24117.c -+++ b/drivers/media/dvb-frontends/cx24117.c -@@ -1555,7 +1555,7 @@ static int cx24117_tune(struct dvb_frontend *fe, bool re_tune, - return cx24117_read_status(fe, status); - } - --static int cx24117_get_algo(struct dvb_frontend *fe) -+static enum dvbfe_algo cx24117_get_algo(struct dvb_frontend *fe) - { - return DVBFE_ALGO_HW; - } -diff --git a/drivers/media/dvb-frontends/cx24120.c b/drivers/media/dvb-frontends/cx24120.c -index 7f11dcc94d85..01da670760ba 100644 ---- a/drivers/media/dvb-frontends/cx24120.c -+++ b/drivers/media/dvb-frontends/cx24120.c -@@ -1491,7 +1491,7 @@ static int cx24120_tune(struct dvb_frontend *fe, bool re_tune, - return cx24120_read_status(fe, status); - } - --static int cx24120_get_algo(struct dvb_frontend *fe) -+static enum dvbfe_algo cx24120_get_algo(struct dvb_frontend *fe) - { - return DVBFE_ALGO_HW; - } -diff --git a/drivers/media/dvb-frontends/cx24123.c b/drivers/media/dvb-frontends/cx24123.c -index 1d59d1d3bd82..41cd0e9ea199 100644 ---- a/drivers/media/dvb-frontends/cx24123.c -+++ b/drivers/media/dvb-frontends/cx24123.c -@@ -1005,7 +1005,7 @@ static int cx24123_tune(struct dvb_frontend *fe, - return retval; - } - --static int cx24123_get_algo(struct dvb_frontend *fe) -+static enum dvbfe_algo cx24123_get_algo(struct dvb_frontend *fe) - { - return DVBFE_ALGO_HW; - } -diff --git a/drivers/media/dvb-frontends/cxd2820r_core.c b/drivers/media/dvb-frontends/cxd2820r_core.c -index f6ebbb47b9b2..3e0d8cbd76da 100644 ---- a/drivers/media/dvb-frontends/cxd2820r_core.c -+++ b/drivers/media/dvb-frontends/cxd2820r_core.c -@@ -403,7 +403,7 @@ static enum dvbfe_search cxd2820r_search(struct dvb_frontend *fe) - return DVBFE_ALGO_SEARCH_ERROR; - } - --static int cxd2820r_get_frontend_algo(struct dvb_frontend *fe) -+static enum dvbfe_algo cxd2820r_get_frontend_algo(struct dvb_frontend *fe) - { - return DVBFE_ALGO_CUSTOM; - } -diff --git a/drivers/media/dvb-frontends/mb86a20s.c b/drivers/media/dvb-frontends/mb86a20s.c -index e8ac8c3e2ec0..e0f4ba8302d1 100644 ---- a/drivers/media/dvb-frontends/mb86a20s.c -+++ b/drivers/media/dvb-frontends/mb86a20s.c -@@ -2055,7 +2055,7 @@ static void mb86a20s_release(struct dvb_frontend *fe) - kfree(state); - } - --static int mb86a20s_get_frontend_algo(struct dvb_frontend *fe) -+static enum dvbfe_algo mb86a20s_get_frontend_algo(struct dvb_frontend *fe) - { - return DVBFE_ALGO_HW; - } -diff --git a/drivers/media/dvb-frontends/s921.c b/drivers/media/dvb-frontends/s921.c -index 274544a3ae0e..9ef9b9bc1bd2 100644 ---- a/drivers/media/dvb-frontends/s921.c -+++ b/drivers/media/dvb-frontends/s921.c -@@ -464,7 +464,7 @@ static int s921_tune(struct dvb_frontend *fe, - return rc; - } - --static int s921_get_algo(struct dvb_frontend *fe) -+static enum dvbfe_algo s921_get_algo(struct dvb_frontend *fe) - { - return DVBFE_ALGO_HW; - } -diff --git a/drivers/media/pci/bt8xx/dst.c b/drivers/media/pci/bt8xx/dst.c -index 7166d2279465..fa682f9fdc4b 100644 ---- a/drivers/media/pci/bt8xx/dst.c -+++ b/drivers/media/pci/bt8xx/dst.c -@@ -1657,7 +1657,7 @@ static int dst_tune_frontend(struct dvb_frontend* fe, - return 0; - } - --static int dst_get_tuning_algo(struct dvb_frontend *fe) -+static enum dvbfe_algo dst_get_tuning_algo(struct dvb_frontend *fe) - { - return dst_algo ? DVBFE_ALGO_HW : DVBFE_ALGO_SW; - } -diff --git a/drivers/media/pci/pt1/va1j5jf8007s.c b/drivers/media/pci/pt1/va1j5jf8007s.c -index f75f69556be7..d913a6050e8c 100644 ---- a/drivers/media/pci/pt1/va1j5jf8007s.c -+++ b/drivers/media/pci/pt1/va1j5jf8007s.c -@@ -98,7 +98,7 @@ static int va1j5jf8007s_read_snr(struct dvb_frontend *fe, u16 *snr) - return 0; - } - --static int va1j5jf8007s_get_frontend_algo(struct dvb_frontend *fe) -+static enum dvbfe_algo va1j5jf8007s_get_frontend_algo(struct dvb_frontend *fe) - { - return DVBFE_ALGO_HW; - } -diff --git a/drivers/media/pci/pt1/va1j5jf8007t.c b/drivers/media/pci/pt1/va1j5jf8007t.c -index 63fda79a75c0..4115c3ccd4a8 100644 ---- a/drivers/media/pci/pt1/va1j5jf8007t.c -+++ b/drivers/media/pci/pt1/va1j5jf8007t.c -@@ -88,7 +88,7 @@ static int va1j5jf8007t_read_snr(struct dvb_frontend *fe, u16 *snr) - return 0; - } - --static int va1j5jf8007t_get_frontend_algo(struct dvb_frontend *fe) -+static enum dvbfe_algo va1j5jf8007t_get_frontend_algo(struct dvb_frontend *fe) - { - return DVBFE_ALGO_HW; - } -diff --git a/drivers/misc/lkdtm_core.c b/drivers/misc/lkdtm_core.c -index 981b3ef71e47..9883da1da383 100644 ---- a/drivers/misc/lkdtm_core.c -+++ b/drivers/misc/lkdtm_core.c -@@ -78,7 +78,7 @@ static irqreturn_t jp_handle_irq_event(unsigned int irq, - return 0; - } - --static void jp_tasklet_action(struct softirq_action *a) -+static void jp_tasklet_action(void) - { - lkdtm_handler(); - jprobe_return(); -diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig -index b811442c5ce6..4f62a63cbcb1 100644 ---- a/drivers/tty/Kconfig -+++ b/drivers/tty/Kconfig -@@ -122,7 +122,6 @@ config UNIX98_PTYS - - config LEGACY_PTYS - bool "Legacy (BSD) PTY support" -- default y - ---help--- - A pseudo terminal (PTY) is a software device consisting of two - halves: a master and a slave. The slave device behaves identical to -diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c -index 417b81c67fe9..4e9bb7851ab1 100644 ---- a/drivers/tty/tty_io.c -+++ b/drivers/tty/tty_io.c -@@ -171,6 +171,7 @@ static void free_tty_struct(struct tty_struct *tty) - put_device(tty->dev); - kfree(tty->write_buf); - tty->magic = 0xDEADDEAD; -+ put_user_ns(tty->owner_user_ns); - kfree(tty); - } - -@@ -2167,11 +2168,19 @@ static int tty_fasync(int fd, struct file *filp, int on) - * FIXME: may race normal receive processing - */ - -+int tiocsti_restrict = IS_ENABLED(CONFIG_SECURITY_TIOCSTI_RESTRICT); -+ - static int tiocsti(struct tty_struct *tty, char __user *p) - { - char ch, mbz = 0; - struct tty_ldisc *ld; - -+ if (tiocsti_restrict && -+ !ns_capable(tty->owner_user_ns, CAP_SYS_ADMIN)) { -+ dev_warn_ratelimited(tty->dev, -+ "Denied TIOCSTI ioctl for non-privileged process\n"); -+ return -EPERM; -+ } - if ((current->signal->tty != tty) && !capable(CAP_SYS_ADMIN)) - return -EPERM; - if (get_user(ch, p)) -@@ -2854,6 +2863,7 @@ struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx) - tty->index = idx; - tty_line_name(driver, idx, tty->name); - tty->dev = tty_get_device(tty); -+ tty->owner_user_ns = get_user_ns(current_user_ns()); - - return tty; - } -diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c -index a073cb5be013..e9dfece7b7ce 100644 ---- a/drivers/usb/core/hub.c -+++ b/drivers/usb/core/hub.c -@@ -38,6 +38,8 @@ - #define USB_VENDOR_GENESYS_LOGIC 0x05e3 - #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01 - -+extern int deny_new_usb; -+ - /* Protect struct usb_device->state and ->children members - * Note: Both are also protected by ->dev.sem, except that ->state can - * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */ -@@ -4818,6 +4820,12 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, - goto done; - return; - } -+ -+ if (deny_new_usb) { -+ dev_err(&port_dev->dev, "denied insert of USB device on port %d\n", port1); -+ goto done; -+ } -+ - if (hub_is_superspeed(hub->hdev)) - unit_load = 150; - else -diff --git a/fs/exec.c b/fs/exec.c -index 0da4d748b4e6..69fcee853363 100644 ---- a/fs/exec.c -+++ b/fs/exec.c -@@ -62,6 +62,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -321,6 +322,8 @@ static int __bprm_mm_init(struct linux_binprm *bprm) - arch_bprm_mm_init(mm, vma); - up_write(&mm->mmap_sem); - bprm->p = vma->vm_end - sizeof(void *); -+ if (randomize_va_space) -+ bprm->p ^= get_random_int() & ~PAGE_MASK; - return 0; - err: - up_write(&mm->mmap_sem); -diff --git a/fs/namei.c b/fs/namei.c -index d1e467b7b9de..0d96ad71b700 100644 ---- a/fs/namei.c -+++ b/fs/namei.c -@@ -902,10 +902,10 @@ static inline void put_link(struct nameidata *nd) - path_put(&last->link); - } - --int sysctl_protected_symlinks __read_mostly = 0; --int sysctl_protected_hardlinks __read_mostly = 0; --int sysctl_protected_fifos __read_mostly; --int sysctl_protected_regular __read_mostly; -+int sysctl_protected_symlinks __read_mostly = 1; -+int sysctl_protected_hardlinks __read_mostly = 1; -+int sysctl_protected_fifos __read_mostly = 2; -+int sysctl_protected_regular __read_mostly = 2; - - /** - * may_follow_link - Check symlink following for unsafe situations -diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig -index 5f93cfacb3d1..cea0d7d3b23e 100644 ---- a/fs/nfs/Kconfig -+++ b/fs/nfs/Kconfig -@@ -195,4 +195,3 @@ config NFS_DEBUG - bool - depends on NFS_FS && SUNRPC_DEBUG - select CRC32 -- default y -diff --git a/fs/pipe.c b/fs/pipe.c -index 8ef7d7bef775..b82f305ec13d 100644 ---- a/fs/pipe.c -+++ b/fs/pipe.c -@@ -38,7 +38,7 @@ unsigned int pipe_max_size = 1048576; - /* - * Minimum pipe size, as required by POSIX - */ --unsigned int pipe_min_size = PAGE_SIZE; -+unsigned int pipe_min_size __read_only = PAGE_SIZE; - - /* Maximum allocatable pages per user. Hard limit is unset by default, soft - * matches default values. -diff --git a/fs/proc/Kconfig b/fs/proc/Kconfig -index 1ade1206bb89..60b0f76dec47 100644 ---- a/fs/proc/Kconfig -+++ b/fs/proc/Kconfig -@@ -39,7 +39,6 @@ config PROC_KCORE - config PROC_VMCORE - bool "/proc/vmcore support" - depends on PROC_FS && CRASH_DUMP -- default y - help - Exports the dump image of crashed kernel in ELF format. - -diff --git a/fs/stat.c b/fs/stat.c -index 873785dae022..d3c2ada8b9c7 100644 ---- a/fs/stat.c -+++ b/fs/stat.c -@@ -40,8 +40,13 @@ void generic_fillattr(struct inode *inode, struct kstat *stat) - stat->gid = inode->i_gid; - stat->rdev = inode->i_rdev; - stat->size = i_size_read(inode); -- stat->atime = inode->i_atime; -- stat->mtime = inode->i_mtime; -+ if (is_sidechannel_device(inode) && !capable_noaudit(CAP_MKNOD)) { -+ stat->atime = inode->i_ctime; -+ stat->mtime = inode->i_ctime; -+ } else { -+ stat->atime = inode->i_atime; -+ stat->mtime = inode->i_mtime; -+ } - stat->ctime = inode->i_ctime; - stat->blksize = i_blocksize(inode); - stat->blocks = inode->i_blocks; -@@ -75,9 +80,14 @@ int vfs_getattr_nosec(const struct path *path, struct kstat *stat, - stat->result_mask |= STATX_BASIC_STATS; - request_mask &= STATX_ALL; - query_flags &= KSTAT_QUERY_FLAGS; -- if (inode->i_op->getattr) -- return inode->i_op->getattr(path, stat, request_mask, -- query_flags); -+ if (inode->i_op->getattr) { -+ int retval = inode->i_op->getattr(path, stat, request_mask, query_flags); -+ if (!retval && is_sidechannel_device(inode) && !capable_noaudit(CAP_MKNOD)) { -+ stat->atime = stat->ctime; -+ stat->mtime = stat->ctime; -+ } -+ return retval; -+ } - - generic_fillattr(inode, stat); - return 0; -diff --git a/include/linux/cache.h b/include/linux/cache.h -index 750621e41d1c..e7157c18c62c 100644 ---- a/include/linux/cache.h -+++ b/include/linux/cache.h -@@ -31,6 +31,8 @@ - #define __ro_after_init __attribute__((__section__(".data..ro_after_init"))) - #endif - -+#define __read_only __ro_after_init -+ - #ifndef ____cacheline_aligned - #define ____cacheline_aligned __attribute__((__aligned__(SMP_CACHE_BYTES))) - #endif -diff --git a/include/linux/capability.h b/include/linux/capability.h -index f640dcbc880c..2b4f5d651f19 100644 ---- a/include/linux/capability.h -+++ b/include/linux/capability.h -@@ -207,6 +207,7 @@ extern bool has_capability_noaudit(struct task_struct *t, int cap); - extern bool has_ns_capability_noaudit(struct task_struct *t, - struct user_namespace *ns, int cap); - extern bool capable(int cap); -+extern bool capable_noaudit(int cap); - extern bool ns_capable(struct user_namespace *ns, int cap); - extern bool ns_capable_noaudit(struct user_namespace *ns, int cap); - #else -@@ -232,6 +233,10 @@ static inline bool capable(int cap) - { - return true; - } -+static inline bool capable_noaudit(int cap) -+{ -+ return true; -+} - static inline bool ns_capable(struct user_namespace *ns, int cap) - { - return true; -diff --git a/include/linux/fs.h b/include/linux/fs.h -index f6a577edec67..fa3a6caeca6c 100644 ---- a/include/linux/fs.h -+++ b/include/linux/fs.h -@@ -3383,4 +3383,15 @@ static inline bool dir_relax_shared(struct inode *inode) - extern bool path_noexec(const struct path *path); - extern void inode_nohighmem(struct inode *inode); - -+extern int device_sidechannel_restrict; -+ -+static inline bool is_sidechannel_device(const struct inode *inode) -+{ -+ umode_t mode; -+ if (!device_sidechannel_restrict) -+ return false; -+ mode = inode->i_mode; -+ return ((S_ISCHR(mode) || S_ISBLK(mode)) && (mode & (S_IROTH | S_IWOTH))); -+} -+ - #endif /* _LINUX_FS_H */ -diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h -index bdaf22582f6e..326ff15d4637 100644 ---- a/include/linux/fsnotify.h -+++ b/include/linux/fsnotify.h -@@ -181,6 +181,9 @@ static inline void fsnotify_access(struct file *file) - struct inode *inode = path->dentry->d_inode; - __u32 mask = FS_ACCESS; - -+ if (is_sidechannel_device(inode)) -+ return; -+ - if (S_ISDIR(inode->i_mode)) - mask |= FS_ISDIR; - -@@ -199,6 +202,9 @@ static inline void fsnotify_modify(struct file *file) - struct inode *inode = path->dentry->d_inode; - __u32 mask = FS_MODIFY; - -+ if (is_sidechannel_device(inode)) -+ return; -+ - if (S_ISDIR(inode->i_mode)) - mask |= FS_ISDIR; - -diff --git a/include/linux/gfp.h b/include/linux/gfp.h -index b041f94678de..fd8bb5a78b75 100644 ---- a/include/linux/gfp.h -+++ b/include/linux/gfp.h -@@ -518,9 +518,9 @@ extern struct page *alloc_pages_vma(gfp_t gfp_mask, int order, - extern unsigned long __get_free_pages(gfp_t gfp_mask, unsigned int order); - extern unsigned long get_zeroed_page(gfp_t gfp_mask); - --void *alloc_pages_exact(size_t size, gfp_t gfp_mask); -+void *alloc_pages_exact(size_t size, gfp_t gfp_mask) __attribute__((alloc_size(1))); - void free_pages_exact(void *virt, size_t size); --void * __meminit alloc_pages_exact_nid(int nid, size_t size, gfp_t gfp_mask); -+void * __meminit alloc_pages_exact_nid(int nid, size_t size, gfp_t gfp_mask) __attribute__((alloc_size(2))); - - #define __get_free_page(gfp_mask) \ - __get_free_pages((gfp_mask), 0) -diff --git a/include/linux/highmem.h b/include/linux/highmem.h -index 776f90f3a1cd..3f5c47000059 100644 ---- a/include/linux/highmem.h -+++ b/include/linux/highmem.h -@@ -191,6 +191,13 @@ static inline void clear_highpage(struct page *page) - kunmap_atomic(kaddr); - } - -+static inline void verify_zero_highpage(struct page *page) -+{ -+ void *kaddr = kmap_atomic(page); -+ BUG_ON(memchr_inv(kaddr, 0, PAGE_SIZE)); -+ kunmap_atomic(kaddr); -+} -+ - static inline void zero_user_segments(struct page *page, - unsigned start1, unsigned end1, - unsigned start2, unsigned end2) -diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h -index 69c238210325..ee487ea4f48f 100644 ---- a/include/linux/interrupt.h -+++ b/include/linux/interrupt.h -@@ -485,7 +485,7 @@ extern const char * const softirq_to_name[NR_SOFTIRQS]; - - struct softirq_action - { -- void (*action)(struct softirq_action *); -+ void (*action)(void); - }; - - asmlinkage void do_softirq(void); -@@ -500,7 +500,7 @@ static inline void do_softirq_own_stack(void) - } - #endif - --extern void open_softirq(int nr, void (*action)(struct softirq_action *)); -+extern void __init open_softirq(int nr, void (*action)(void)); - extern void softirq_init(void); - extern void __raise_softirq_irqoff(unsigned int nr); - -diff --git a/include/linux/kobject_ns.h b/include/linux/kobject_ns.h -index df32d2508290..c992d130b94d 100644 ---- a/include/linux/kobject_ns.h -+++ b/include/linux/kobject_ns.h -@@ -46,7 +46,7 @@ struct kobj_ns_type_operations { - void (*drop_ns)(void *); - }; - --int kobj_ns_type_register(const struct kobj_ns_type_operations *ops); -+int __init kobj_ns_type_register(const struct kobj_ns_type_operations *ops); - int kobj_ns_type_registered(enum kobj_ns_type type); - const struct kobj_ns_type_operations *kobj_child_ns_ops(struct kobject *parent); - const struct kobj_ns_type_operations *kobj_ns_ops(struct kobject *kobj); -diff --git a/include/linux/mm.h b/include/linux/mm.h -index 58f2263de4de..e90dc5d98c7f 100644 ---- a/include/linux/mm.h -+++ b/include/linux/mm.h -@@ -525,7 +525,7 @@ static inline int is_vmalloc_or_module_addr(const void *x) - } - #endif - --extern void *kvmalloc_node(size_t size, gfp_t flags, int node); -+extern void *kvmalloc_node(size_t size, gfp_t flags, int node) __attribute__((alloc_size(1))); - static inline void *kvmalloc(size_t size, gfp_t flags) - { - return kvmalloc_node(size, flags, NUMA_NO_NODE); -diff --git a/include/linux/percpu.h b/include/linux/percpu.h -index 296bbe49d5d1..b26652c9a98d 100644 ---- a/include/linux/percpu.h -+++ b/include/linux/percpu.h -@@ -129,7 +129,7 @@ extern int __init pcpu_page_first_chunk(size_t reserved_size, - pcpu_fc_populate_pte_fn_t populate_pte_fn); - #endif - --extern void __percpu *__alloc_reserved_percpu(size_t size, size_t align); -+extern void __percpu *__alloc_reserved_percpu(size_t size, size_t align) __attribute__((alloc_size(1))); - extern bool __is_kernel_percpu_address(unsigned long addr, unsigned long *can_addr); - extern bool is_kernel_percpu_address(unsigned long addr); - -@@ -137,8 +137,8 @@ extern bool is_kernel_percpu_address(unsigned long addr); - extern void __init setup_per_cpu_areas(void); - #endif - --extern void __percpu *__alloc_percpu_gfp(size_t size, size_t align, gfp_t gfp); --extern void __percpu *__alloc_percpu(size_t size, size_t align); -+extern void __percpu *__alloc_percpu_gfp(size_t size, size_t align, gfp_t gfp) __attribute__((alloc_size(1))); -+extern void __percpu *__alloc_percpu(size_t size, size_t align) __attribute__((alloc_size(1))); - extern void free_percpu(void __percpu *__pdata); - extern phys_addr_t per_cpu_ptr_to_phys(void *addr); - -diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h -index 8e22f24ded6a..b7fecdfa6de5 100644 ---- a/include/linux/perf_event.h -+++ b/include/linux/perf_event.h -@@ -1165,6 +1165,11 @@ extern int perf_cpu_time_max_percent_handler(struct ctl_table *table, int write, - int perf_event_max_stack_handler(struct ctl_table *table, int write, - void __user *buffer, size_t *lenp, loff_t *ppos); - -+static inline bool perf_paranoid_any(void) -+{ -+ return sysctl_perf_event_paranoid > 2; -+} -+ - static inline bool perf_paranoid_tracepoint_raw(void) - { - return sysctl_perf_event_paranoid > -1; -diff --git a/include/linux/slab.h b/include/linux/slab.h -index ae5ed6492d54..fd0786124504 100644 ---- a/include/linux/slab.h -+++ b/include/linux/slab.h -@@ -146,8 +146,8 @@ void memcg_destroy_kmem_caches(struct mem_cgroup *); - /* - * Common kmalloc functions provided by all allocators - */ --void * __must_check __krealloc(const void *, size_t, gfp_t); --void * __must_check krealloc(const void *, size_t, gfp_t); -+void * __must_check __krealloc(const void *, size_t, gfp_t) __attribute__((alloc_size(2))); -+void * __must_check krealloc(const void *, size_t, gfp_t) __attribute((alloc_size(2))); - void kfree(const void *); - void kzfree(const void *); - size_t ksize(const void *); -@@ -324,7 +324,7 @@ static __always_inline int kmalloc_index(size_t size) - } - #endif /* !CONFIG_SLOB */ - --void *__kmalloc(size_t size, gfp_t flags) __assume_kmalloc_alignment __malloc; -+void *__kmalloc(size_t size, gfp_t flags) __assume_kmalloc_alignment __malloc __attribute__((alloc_size(1))); - void *kmem_cache_alloc(struct kmem_cache *, gfp_t flags) __assume_slab_alignment __malloc; - void kmem_cache_free(struct kmem_cache *, void *); - -@@ -348,7 +348,7 @@ static __always_inline void kfree_bulk(size_t size, void **p) - } - - #ifdef CONFIG_NUMA --void *__kmalloc_node(size_t size, gfp_t flags, int node) __assume_kmalloc_alignment __malloc; -+void *__kmalloc_node(size_t size, gfp_t flags, int node) __assume_kmalloc_alignment __malloc __attribute__((alloc_size(1))); - void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node) __assume_slab_alignment __malloc; - #else - static __always_inline void *__kmalloc_node(size_t size, gfp_t flags, int node) -@@ -473,7 +473,7 @@ static __always_inline void *kmalloc_large(size_t size, gfp_t flags) - * for general use, and so are not documented here. For a full list of - * potential flags, always refer to linux/gfp.h. - */ --static __always_inline void *kmalloc(size_t size, gfp_t flags) -+static __always_inline __attribute__((alloc_size(1))) void *kmalloc(size_t size, gfp_t flags) - { - if (__builtin_constant_p(size)) { - if (size > KMALLOC_MAX_CACHE_SIZE) -@@ -513,7 +513,7 @@ static __always_inline int kmalloc_size(int n) - return 0; - } - --static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node) -+static __always_inline __attribute__((alloc_size(1))) void *kmalloc_node(size_t size, gfp_t flags, int node) - { - #ifndef CONFIG_SLOB - if (__builtin_constant_p(size) && -diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h -index f8ced87a2efe..cd61c8d2aa6e 100644 ---- a/include/linux/slub_def.h -+++ b/include/linux/slub_def.h -@@ -121,6 +121,11 @@ struct kmem_cache { - unsigned long random; - #endif - -+#ifdef CONFIG_SLAB_CANARY -+ unsigned long random_active; -+ unsigned long random_inactive; -+#endif -+ - #ifdef CONFIG_NUMA - /* - * Defragmentation by allocating from a remote node. -diff --git a/include/linux/string.h b/include/linux/string.h -index 96115bf561b4..f93d908c5bbc 100644 ---- a/include/linux/string.h -+++ b/include/linux/string.h -@@ -234,10 +234,16 @@ void __read_overflow2(void) __compiletime_error("detected read beyond size of ob - void __read_overflow3(void) __compiletime_error("detected read beyond size of object passed as 3rd parameter"); - void __write_overflow(void) __compiletime_error("detected write beyond size of object passed as 1st parameter"); - -+#ifdef CONFIG_FORTIFY_SOURCE_STRICT_STRING -+#define __string_size(p) __builtin_object_size(p, 1) -+#else -+#define __string_size(p) __builtin_object_size(p, 0) -+#endif -+ - #if !defined(__NO_FORTIFY) && defined(__OPTIMIZE__) && defined(CONFIG_FORTIFY_SOURCE) - __FORTIFY_INLINE char *strncpy(char *p, const char *q, __kernel_size_t size) - { -- size_t p_size = __builtin_object_size(p, 0); -+ size_t p_size = __string_size(p); - if (__builtin_constant_p(size) && p_size < size) - __write_overflow(); - if (p_size < size) -@@ -247,7 +253,7 @@ __FORTIFY_INLINE char *strncpy(char *p, const char *q, __kernel_size_t size) - - __FORTIFY_INLINE char *strcat(char *p, const char *q) - { -- size_t p_size = __builtin_object_size(p, 0); -+ size_t p_size = __string_size(p); - if (p_size == (size_t)-1) - return __builtin_strcat(p, q); - if (strlcat(p, q, p_size) >= p_size) -@@ -258,7 +264,7 @@ __FORTIFY_INLINE char *strcat(char *p, const char *q) - __FORTIFY_INLINE __kernel_size_t strlen(const char *p) - { - __kernel_size_t ret; -- size_t p_size = __builtin_object_size(p, 0); -+ size_t p_size = __string_size(p); - - /* Work around gcc excess stack consumption issue */ - if (p_size == (size_t)-1 || -@@ -273,7 +279,7 @@ __FORTIFY_INLINE __kernel_size_t strlen(const char *p) - extern __kernel_size_t __real_strnlen(const char *, __kernel_size_t) __RENAME(strnlen); - __FORTIFY_INLINE __kernel_size_t strnlen(const char *p, __kernel_size_t maxlen) - { -- size_t p_size = __builtin_object_size(p, 0); -+ size_t p_size = __string_size(p); - __kernel_size_t ret = __real_strnlen(p, maxlen < p_size ? maxlen : p_size); - if (p_size <= ret && maxlen != ret) - fortify_panic(__func__); -@@ -285,8 +291,8 @@ extern size_t __real_strlcpy(char *, const char *, size_t) __RENAME(strlcpy); - __FORTIFY_INLINE size_t strlcpy(char *p, const char *q, size_t size) - { - size_t ret; -- size_t p_size = __builtin_object_size(p, 0); -- size_t q_size = __builtin_object_size(q, 0); -+ size_t p_size = __string_size(p); -+ size_t q_size = __string_size(q); - if (p_size == (size_t)-1 && q_size == (size_t)-1) - return __real_strlcpy(p, q, size); - ret = strlen(q); -@@ -306,8 +312,8 @@ __FORTIFY_INLINE size_t strlcpy(char *p, const char *q, size_t size) - __FORTIFY_INLINE char *strncat(char *p, const char *q, __kernel_size_t count) - { - size_t p_len, copy_len; -- size_t p_size = __builtin_object_size(p, 0); -- size_t q_size = __builtin_object_size(q, 0); -+ size_t p_size = __string_size(p); -+ size_t q_size = __string_size(q); - if (p_size == (size_t)-1 && q_size == (size_t)-1) - return __builtin_strncat(p, q, count); - p_len = strlen(p); -@@ -420,8 +426,8 @@ __FORTIFY_INLINE void *kmemdup(const void *p, size_t size, gfp_t gfp) - /* defined after fortified strlen and memcpy to reuse them */ - __FORTIFY_INLINE char *strcpy(char *p, const char *q) - { -- size_t p_size = __builtin_object_size(p, 0); -- size_t q_size = __builtin_object_size(q, 0); -+ size_t p_size = __string_size(p); -+ size_t q_size = __string_size(q); - if (p_size == (size_t)-1 && q_size == (size_t)-1) - return __builtin_strcpy(p, q); - memcpy(p, q, strlen(q) + 1); -diff --git a/include/linux/tty.h b/include/linux/tty.h -index 1dd587ba6d88..9a9a04fb641d 100644 ---- a/include/linux/tty.h -+++ b/include/linux/tty.h -@@ -13,6 +13,7 @@ - #include - #include - #include -+#include - - - /* -@@ -335,6 +336,7 @@ struct tty_struct { - /* If the tty has a pending do_SAK, queue it here - akpm */ - struct work_struct SAK_work; - struct tty_port *port; -+ struct user_namespace *owner_user_ns; - } __randomize_layout; - - /* Each of a tty's open files has private_data pointing to tty_file_private */ -@@ -344,6 +346,8 @@ struct tty_file_private { - struct list_head list; - }; - -+extern int tiocsti_restrict; -+ - /* tty magic number */ - #define TTY_MAGIC 0x5401 - -diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h -index 1e5d8c392f15..66d0e49c9987 100644 ---- a/include/linux/vmalloc.h -+++ b/include/linux/vmalloc.h -@@ -68,19 +68,19 @@ static inline void vmalloc_init(void) - } - #endif - --extern void *vmalloc(unsigned long size); --extern void *vzalloc(unsigned long size); --extern void *vmalloc_user(unsigned long size); --extern void *vmalloc_node(unsigned long size, int node); --extern void *vzalloc_node(unsigned long size, int node); --extern void *vmalloc_exec(unsigned long size); --extern void *vmalloc_32(unsigned long size); --extern void *vmalloc_32_user(unsigned long size); --extern void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot); -+extern void *vmalloc(unsigned long size) __attribute__((alloc_size(1))); -+extern void *vzalloc(unsigned long size) __attribute__((alloc_size(1))); -+extern void *vmalloc_user(unsigned long size) __attribute__((alloc_size(1))); -+extern void *vmalloc_node(unsigned long size, int node) __attribute__((alloc_size(1))); -+extern void *vzalloc_node(unsigned long size, int node) __attribute__((alloc_size(1))); -+extern void *vmalloc_exec(unsigned long size) __attribute__((alloc_size(1))); -+extern void *vmalloc_32(unsigned long size) __attribute__((alloc_size(1))); -+extern void *vmalloc_32_user(unsigned long size) __attribute__((alloc_size(1))); -+extern void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot) __attribute__((alloc_size(1))); - extern void *__vmalloc_node_range(unsigned long size, unsigned long align, - unsigned long start, unsigned long end, gfp_t gfp_mask, - pgprot_t prot, unsigned long vm_flags, int node, -- const void *caller); -+ const void *caller) __attribute__((alloc_size(1))); - #ifndef CONFIG_MMU - extern void *__vmalloc_node_flags(unsigned long size, int node, gfp_t flags); - static inline void *__vmalloc_node_flags_caller(unsigned long size, int node, -diff --git a/init/Kconfig b/init/Kconfig -index 46075327c165..0c78750bc76d 100644 ---- a/init/Kconfig -+++ b/init/Kconfig -@@ -309,6 +309,7 @@ config USELIB - config AUDIT - bool "Auditing support" - depends on NET -+ default y - help - Enable auditing infrastructure that can be used with another - kernel subsystem, such as SELinux (which requires this for -@@ -1052,6 +1053,12 @@ config CC_OPTIMIZE_FOR_SIZE - - endchoice - -+config LOCAL_INIT -+ bool "Zero uninitialized locals" -+ help -+ Zero-fill uninitialized local variables, other than variable-length -+ arrays. Requires compiler support. -+ - config SYSCTL - bool - -@@ -1361,8 +1368,7 @@ config SHMEM - which may be appropriate on small systems without swap. - - config AIO -- bool "Enable AIO support" if EXPERT -- default y -+ bool "Enable AIO support" - help - This option enables POSIX asynchronous I/O which may by used - by some high performance threaded applications. Disabling -@@ -1491,7 +1497,7 @@ config VM_EVENT_COUNTERS - - config SLUB_DEBUG - default y -- bool "Enable SLUB debugging support" if EXPERT -+ bool "Enable SLUB debugging support" - depends on SLUB && SYSFS - help - SLUB has extensive debug support features. Disabling these can -@@ -1515,7 +1521,6 @@ config SLUB_MEMCG_SYSFS_ON - - config COMPAT_BRK - bool "Disable heap randomization" -- default y - help - Randomizing heap placement makes heap exploits harder, but it - also breaks ancient binaries (including anything libc5 based). -@@ -1562,7 +1567,6 @@ endchoice - - config SLAB_MERGE_DEFAULT - bool "Allow slab caches to be merged" -- default y - help - For reduced kernel memory fragmentation, slab caches can be - merged when they share the same size and other characteristics. -@@ -1575,9 +1579,9 @@ config SLAB_MERGE_DEFAULT - command line. - - config SLAB_FREELIST_RANDOM -- default n - depends on SLAB || SLUB - bool "SLAB freelist randomization" -+ default y - help - Randomizes the freelist order used on creating new pages. This - security feature reduces the predictability of the kernel slab -@@ -1586,12 +1590,56 @@ config SLAB_FREELIST_RANDOM - config SLAB_FREELIST_HARDENED - bool "Harden slab freelist metadata" - depends on SLUB -+ default y - help - Many kernel heap attacks try to target slab cache metadata and - other infrastructure. This options makes minor performance - sacrifies to harden the kernel slab allocator against common - freelist exploit methods. - -+config SLAB_HARDENED -+ default y -+ depends on SLUB -+ bool "Hardened SLAB infrastructure" -+ help -+ Make minor performance sacrifices to harden the kernel slab -+ allocator. -+ -+config SLAB_CANARY -+ depends on SLUB -+ depends on !SLAB_MERGE_DEFAULT -+ bool "SLAB canaries" -+ default y -+ help -+ Place canaries at the end of kernel slab allocations, sacrificing -+ some performance and memory usage for security. -+ -+ Canaries can detect some forms of heap corruption when allocations -+ are freed and as part of the HARDENED_USERCOPY feature. It provides -+ basic use-after-free detection for HARDENED_USERCOPY. -+ -+ Canaries absorb small overflows (rendering them harmless), mitigate -+ non-NUL terminated C string overflows on 64-bit via a guaranteed zero -+ byte and provide basic double-free detection. -+ -+config SLAB_SANITIZE -+ bool "Sanitize SLAB allocations" -+ depends on SLUB -+ default y -+ help -+ Zero fill slab allocations on free, reducing the lifetime of -+ sensitive data and helping to mitigate use-after-free bugs. -+ -+ For slabs with debug poisoning enabling, this has no impact. -+ -+config SLAB_SANITIZE_VERIFY -+ depends on SLAB_SANITIZE && PAGE_SANITIZE -+ default y -+ bool "Verify sanitized SLAB allocations" -+ help -+ Verify that newly allocated slab allocations are zeroed to detect -+ write-after-free bugs. -+ - config SLUB_CPU_PARTIAL - default y - depends on SLUB && SMP -diff --git a/kernel/audit.c b/kernel/audit.c -index d301276bca58..d55a1e290cea 100644 ---- a/kernel/audit.c -+++ b/kernel/audit.c -@@ -1575,6 +1575,9 @@ static int __init audit_enable(char *str) - audit_default = !!simple_strtol(str, NULL, 0); - if (!audit_default) - audit_initialized = AUDIT_DISABLED; -+ else -+ audit_initialized = AUDIT_UNINITIALIZED; -+ - audit_enabled = audit_default; - audit_ever_enabled = !!audit_enabled; - -diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c -index d203a5d6b726..2a6c3e2c57a6 100644 ---- a/kernel/bpf/core.c -+++ b/kernel/bpf/core.c -@@ -539,7 +539,7 @@ void __weak bpf_jit_free(struct bpf_prog *fp) - bpf_prog_unlock_free(fp); - } - --int bpf_jit_harden __read_mostly; -+int bpf_jit_harden __read_mostly = 2; - - static int bpf_jit_blind_insn(const struct bpf_insn *from, - const struct bpf_insn *aux, -diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c -index 5c9deed4524e..6d90aabecfc7 100644 ---- a/kernel/bpf/syscall.c -+++ b/kernel/bpf/syscall.c -@@ -37,7 +37,7 @@ static DEFINE_SPINLOCK(prog_idr_lock); - static DEFINE_IDR(map_idr); - static DEFINE_SPINLOCK(map_idr_lock); - --int sysctl_unprivileged_bpf_disabled __read_mostly; -+int sysctl_unprivileged_bpf_disabled __read_mostly = 1; - - static const struct bpf_map_ops * const bpf_map_types[] = { - #define BPF_PROG_TYPE(_id, _ops) -diff --git a/kernel/capability.c b/kernel/capability.c -index 1e1c0236f55b..452062fe45ce 100644 ---- a/kernel/capability.c -+++ b/kernel/capability.c -@@ -431,6 +431,12 @@ bool capable(int cap) - return ns_capable(&init_user_ns, cap); - } - EXPORT_SYMBOL(capable); -+ -+bool capable_noaudit(int cap) -+{ -+ return ns_capable_noaudit(&init_user_ns, cap); -+} -+EXPORT_SYMBOL(capable_noaudit); - #endif /* CONFIG_MULTIUSER */ - - /** -diff --git a/kernel/events/core.c b/kernel/events/core.c -index 991af683ef9e..66f66b648707 100644 ---- a/kernel/events/core.c -+++ b/kernel/events/core.c -@@ -397,8 +397,13 @@ static cpumask_var_t perf_online_mask; - * 0 - disallow raw tracepoint access for unpriv - * 1 - disallow cpu events for unpriv - * 2 - disallow kernel profiling for unpriv -+ * 3 - disallow all unpriv perf event use - */ -+#ifdef CONFIG_SECURITY_PERF_EVENTS_RESTRICT -+int sysctl_perf_event_paranoid __read_mostly = 3; -+#else - int sysctl_perf_event_paranoid __read_mostly = 2; -+#endif - - /* Minimum for 512 kiB + 1 user control page */ - int sysctl_perf_event_mlock __read_mostly = 512 + (PAGE_SIZE / 1024); /* 'free' kiB per user */ -@@ -9984,6 +9989,9 @@ SYSCALL_DEFINE5(perf_event_open, - if (flags & ~PERF_FLAG_ALL) - return -EINVAL; - -+ if (perf_paranoid_any() && !capable(CAP_SYS_ADMIN)) -+ return -EACCES; -+ - err = perf_copy_attr(attr_uptr, &attr); - if (err) - return err; -diff --git a/kernel/fork.c b/kernel/fork.c -index 6d6ce2c3a364..951a76b3dc32 100644 ---- a/kernel/fork.c -+++ b/kernel/fork.c -@@ -102,6 +102,11 @@ - - #define CREATE_TRACE_POINTS - #include -+#ifdef CONFIG_USER_NS -+extern int unprivileged_userns_clone; -+#else -+#define unprivileged_userns_clone 0 -+#endif - - /* - * Minimum number of threads to boot the kernel -@@ -1555,6 +1560,10 @@ static __latent_entropy struct task_struct *copy_process( - if ((clone_flags & (CLONE_NEWUSER|CLONE_FS)) == (CLONE_NEWUSER|CLONE_FS)) - return ERR_PTR(-EINVAL); - -+ if ((clone_flags & CLONE_NEWUSER) && !unprivileged_userns_clone) -+ if (!capable(CAP_SYS_ADMIN)) -+ return ERR_PTR(-EPERM); -+ - /* - * Thread groups must share signals as well, and detached threads - * can only be started up within the thread group. -@@ -2357,6 +2366,12 @@ SYSCALL_DEFINE1(unshare, unsigned long, unshare_flags) - if (unshare_flags & CLONE_NEWNS) - unshare_flags |= CLONE_FS; - -+ if ((unshare_flags & CLONE_NEWUSER) && !unprivileged_userns_clone) { -+ err = -EPERM; -+ if (!capable(CAP_SYS_ADMIN)) -+ goto bad_unshare_out; -+ } -+ - err = check_unshare_flags(unshare_flags); - if (err) - goto bad_unshare_out; -diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c -index 0972a8e09d08..00dde7aad47a 100644 ---- a/kernel/power/snapshot.c -+++ b/kernel/power/snapshot.c -@@ -1136,7 +1136,7 @@ void free_basic_memory_bitmaps(void) - - void clear_free_pages(void) - { --#ifdef CONFIG_PAGE_POISONING_ZERO -+#if defined(CONFIG_PAGE_POISONING_ZERO) || defined(CONFIG_PAGE_SANITIZE) - struct memory_bitmap *bm = free_pages_map; - unsigned long pfn; - -@@ -1153,7 +1153,7 @@ void clear_free_pages(void) - } - memory_bm_position_reset(bm); - pr_info("PM: free pages cleared after restore\n"); --#endif /* PAGE_POISONING_ZERO */ -+#endif /* PAGE_POISONING_ZERO || PAGE_SANITIZE */ - } - - /** -diff --git a/kernel/rcu/tiny.c b/kernel/rcu/tiny.c -index a64eee0db39e..4d7de378fe4c 100644 ---- a/kernel/rcu/tiny.c -+++ b/kernel/rcu/tiny.c -@@ -164,7 +164,7 @@ static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp) - } - } - --static __latent_entropy void rcu_process_callbacks(struct softirq_action *unused) -+static __latent_entropy void rcu_process_callbacks(void) - { - __rcu_process_callbacks(&rcu_sched_ctrlblk); - __rcu_process_callbacks(&rcu_bh_ctrlblk); -diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c -index 710ce1d6b982..4013b634e820 100644 ---- a/kernel/rcu/tree.c -+++ b/kernel/rcu/tree.c -@@ -2927,7 +2927,7 @@ __rcu_process_callbacks(struct rcu_state *rsp) - /* - * Do RCU core processing for the current CPU. - */ --static __latent_entropy void rcu_process_callbacks(struct softirq_action *unused) -+static __latent_entropy void rcu_process_callbacks(void) - { - struct rcu_state *rsp; - -diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c -index f33b24080b1c..99c5e423906f 100644 ---- a/kernel/sched/fair.c -+++ b/kernel/sched/fair.c -@@ -8982,7 +8982,7 @@ static void nohz_idle_balance(struct rq *this_rq, enum cpu_idle_type idle) { } - * run_rebalance_domains is triggered when needed from the scheduler tick. - * Also triggered for nohz idle balancing (with nohz_balancing_kick set). - */ --static __latent_entropy void run_rebalance_domains(struct softirq_action *h) -+static __latent_entropy void run_rebalance_domains(void) - { - struct rq *this_rq = this_rq(); - enum cpu_idle_type idle = this_rq->idle_balance ? -diff --git a/kernel/softirq.c b/kernel/softirq.c -index a4c87cf27f9d..efb97a8dc568 100644 ---- a/kernel/softirq.c -+++ b/kernel/softirq.c -@@ -53,7 +53,7 @@ irq_cpustat_t irq_stat[NR_CPUS] ____cacheline_aligned; - EXPORT_SYMBOL(irq_stat); - #endif - --static struct softirq_action softirq_vec[NR_SOFTIRQS] __cacheline_aligned_in_smp; -+static struct softirq_action softirq_vec[NR_SOFTIRQS] __ro_after_init __aligned(PAGE_SIZE); - - DEFINE_PER_CPU(struct task_struct *, ksoftirqd); - -@@ -285,7 +285,7 @@ asmlinkage __visible void __softirq_entry __do_softirq(void) - kstat_incr_softirqs_this_cpu(vec_nr); - - trace_softirq_entry(vec_nr); -- h->action(h); -+ h->action(); - trace_softirq_exit(vec_nr); - if (unlikely(prev_count != preempt_count())) { - pr_err("huh, entered softirq %u %s %p with preempt_count %08x, exited with %08x?\n", -@@ -448,7 +448,7 @@ void __raise_softirq_irqoff(unsigned int nr) - or_softirq_pending(1UL << nr); - } - --void open_softirq(int nr, void (*action)(struct softirq_action *)) -+void __init open_softirq(int nr, void (*action)(void)) - { - softirq_vec[nr].action = action; - } -@@ -490,7 +490,7 @@ void __tasklet_hi_schedule(struct tasklet_struct *t) - } - EXPORT_SYMBOL(__tasklet_hi_schedule); - --static __latent_entropy void tasklet_action(struct softirq_action *a) -+static __latent_entropy void tasklet_action(void) - { - struct tasklet_struct *list; - -@@ -526,7 +526,7 @@ static __latent_entropy void tasklet_action(struct softirq_action *a) - } - } - --static __latent_entropy void tasklet_hi_action(struct softirq_action *a) -+static __latent_entropy void tasklet_hi_action(void) - { - struct tasklet_struct *list; - -diff --git a/kernel/sysctl.c b/kernel/sysctl.c -index d330b1ce3b94..050278b12928 100644 ---- a/kernel/sysctl.c -+++ b/kernel/sysctl.c -@@ -66,6 +66,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -98,12 +99,19 @@ - #if defined(CONFIG_SYSCTL) - - /* External variables not in a header file. */ -+#if IS_ENABLED(CONFIG_USB) -+int deny_new_usb __read_mostly = 0; -+EXPORT_SYMBOL(deny_new_usb); -+#endif - extern int suid_dumpable; - #ifdef CONFIG_COREDUMP - extern int core_uses_pid; - extern char core_pattern[]; - extern unsigned int core_pipe_limit; - #endif -+#ifdef CONFIG_USER_NS -+extern int unprivileged_userns_clone; -+#endif - extern int pid_max; - extern int pid_max_min, pid_max_max; - extern int percpu_pagelist_fraction; -@@ -115,40 +123,43 @@ extern int sysctl_nr_trim_pages; - - /* Constants used for minimum and maximum */ - #ifdef CONFIG_LOCKUP_DETECTOR --static int sixty = 60; -+static int sixty __read_only = 60; - #endif - --static int __maybe_unused neg_one = -1; -+static int __maybe_unused neg_one __read_only = -1; - - static int zero; --static int __maybe_unused one = 1; --static int __maybe_unused two = 2; --static int __maybe_unused four = 4; --static unsigned long one_ul = 1; --static int one_hundred = 100; --static int one_thousand = 1000; -+static int __maybe_unused one __read_only = 1; -+static int __maybe_unused two __read_only = 2; -+static int __maybe_unused four __read_only = 4; -+static unsigned long one_ul __read_only = 1; -+static int one_hundred __read_only = 100; -+static int one_thousand __read_only = 1000; - #ifdef CONFIG_PRINTK --static int ten_thousand = 10000; -+static int ten_thousand __read_only = 10000; - #endif - #ifdef CONFIG_PERF_EVENTS --static int six_hundred_forty_kb = 640 * 1024; -+static int six_hundred_forty_kb __read_only = 640 * 1024; - #endif - - /* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */ --static unsigned long dirty_bytes_min = 2 * PAGE_SIZE; -+static unsigned long dirty_bytes_min __read_only = 2 * PAGE_SIZE; - - /* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */ --static int maxolduid = 65535; --static int minolduid; -+static int maxolduid __read_only = 65535; -+static int minolduid __read_only; - --static int ngroups_max = NGROUPS_MAX; -+static int ngroups_max __read_only = NGROUPS_MAX; - static const int cap_last_cap = CAP_LAST_CAP; - - /*this is needed for proc_doulongvec_minmax of sysctl_hung_task_timeout_secs */ - #ifdef CONFIG_DETECT_HUNG_TASK --static unsigned long hung_task_timeout_max = (LONG_MAX/HZ); -+static unsigned long hung_task_timeout_max __read_only = (LONG_MAX/HZ); - #endif - -+int device_sidechannel_restrict __read_mostly = 1; -+EXPORT_SYMBOL(device_sidechannel_restrict); -+ - #ifdef CONFIG_INOTIFY_USER - #include - #endif -@@ -286,19 +297,19 @@ static struct ctl_table sysctl_base_table[] = { - }; - - #ifdef CONFIG_SCHED_DEBUG --static int min_sched_granularity_ns = 100000; /* 100 usecs */ --static int max_sched_granularity_ns = NSEC_PER_SEC; /* 1 second */ --static int min_wakeup_granularity_ns; /* 0 usecs */ --static int max_wakeup_granularity_ns = NSEC_PER_SEC; /* 1 second */ -+static int min_sched_granularity_ns __read_only = 100000; /* 100 usecs */ -+static int max_sched_granularity_ns __read_only = NSEC_PER_SEC; /* 1 second */ -+static int min_wakeup_granularity_ns __read_only; /* 0 usecs */ -+static int max_wakeup_granularity_ns __read_only = NSEC_PER_SEC; /* 1 second */ - #ifdef CONFIG_SMP --static int min_sched_tunable_scaling = SCHED_TUNABLESCALING_NONE; --static int max_sched_tunable_scaling = SCHED_TUNABLESCALING_END-1; -+static int min_sched_tunable_scaling __read_only = SCHED_TUNABLESCALING_NONE; -+static int max_sched_tunable_scaling __read_only = SCHED_TUNABLESCALING_END-1; - #endif /* CONFIG_SMP */ - #endif /* CONFIG_SCHED_DEBUG */ - - #ifdef CONFIG_COMPACTION --static int min_extfrag_threshold; --static int max_extfrag_threshold = 1000; -+static int min_extfrag_threshold __read_only; -+static int max_extfrag_threshold __read_only = 1000; - #endif - - static struct ctl_table kern_table[] = { -@@ -512,6 +523,15 @@ static struct ctl_table kern_table[] = { - .proc_handler = proc_dointvec, - }, - #endif -+#ifdef CONFIG_USER_NS -+ { -+ .procname = "unprivileged_userns_clone", -+ .data = &unprivileged_userns_clone, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = proc_dointvec, -+ }, -+#endif - #ifdef CONFIG_PROC_SYSCTL - { - .procname = "tainted", -@@ -853,6 +873,37 @@ static struct ctl_table kern_table[] = { - .extra1 = &zero, - .extra2 = &two, - }, -+#endif -+#if defined CONFIG_TTY -+ { -+ .procname = "tiocsti_restrict", -+ .data = &tiocsti_restrict, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = proc_dointvec_minmax_sysadmin, -+ .extra1 = &zero, -+ .extra2 = &one, -+ }, -+#endif -+ { -+ .procname = "device_sidechannel_restrict", -+ .data = &device_sidechannel_restrict, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = proc_dointvec_minmax_sysadmin, -+ .extra1 = &zero, -+ .extra2 = &one, -+ }, -+#if IS_ENABLED(CONFIG_USB) -+ { -+ .procname = "deny_new_usb", -+ .data = &deny_new_usb, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = proc_dointvec_minmax_sysadmin, -+ .extra1 = &zero, -+ .extra2 = &one, -+ }, - #endif - { - .procname = "ngroups_max", -diff --git a/kernel/time/timer.c b/kernel/time/timer.c -index f17c76a1a05f..50f079d11488 100644 ---- a/kernel/time/timer.c -+++ b/kernel/time/timer.c -@@ -1640,7 +1640,7 @@ static inline void __run_timers(struct timer_base *base) - /* - * This function runs timers and the timer-tq in bottom half context. - */ --static __latent_entropy void run_timer_softirq(struct softirq_action *h) -+static __latent_entropy void run_timer_softirq(void) - { - struct timer_base *base = this_cpu_ptr(&timer_bases[BASE_STD]); - -diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c -index ed80a88980f0..ff6d27d06af0 100644 ---- a/kernel/user_namespace.c -+++ b/kernel/user_namespace.c -@@ -24,6 +24,9 @@ - #include - #include - -+/* sysctl */ -+int unprivileged_userns_clone; -+ - static struct kmem_cache *user_ns_cachep __read_mostly; - static DEFINE_MUTEX(userns_state_mutex); - -diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug -index 62d0e25c054c..3953072277eb 100644 ---- a/lib/Kconfig.debug -+++ b/lib/Kconfig.debug -@@ -937,6 +937,7 @@ endmenu # "Debug lockups and hangs" - - config PANIC_ON_OOPS - bool "Panic on Oops" -+ default y - help - Say Y here to enable the kernel to panic when it oopses. This - has the same effect as setting oops=panic on the kernel command -@@ -946,7 +947,7 @@ config PANIC_ON_OOPS - anything erroneous after an oops which could result in data - corruption or other issues. - -- Say N if unsure. -+ Say Y if unsure. - - config PANIC_ON_OOPS_VALUE - int -@@ -1319,6 +1320,7 @@ config DEBUG_BUGVERBOSE - config DEBUG_LIST - bool "Debug linked list manipulation" - depends on DEBUG_KERNEL || BUG_ON_DATA_CORRUPTION -+ default y - help - Enable this to turn on extended checks in the linked-list - walking routines. -@@ -1932,6 +1934,7 @@ config MEMTEST - config BUG_ON_DATA_CORRUPTION - bool "Trigger a BUG when data corruption is detected" - select DEBUG_LIST -+ default y - help - Select this option if the kernel should BUG when it encounters - data corruption in kernel memory structures when they get checked -@@ -1952,7 +1955,7 @@ config STRICT_DEVMEM - bool "Filter access to /dev/mem" - depends on MMU && DEVMEM - depends on ARCH_HAS_DEVMEM_IS_ALLOWED -- default y if TILE || PPC -+ default y - ---help--- - If this option is disabled, you allow userspace (root) access to all - of memory, including kernel and userspace memory. Accidental -@@ -1971,6 +1974,7 @@ config STRICT_DEVMEM - config IO_STRICT_DEVMEM - bool "Filter I/O access to /dev/mem" - depends on STRICT_DEVMEM -+ default y - ---help--- - If this option is disabled, you allow userspace (root) access to all - io-memory regardless of whether a driver is actively using that -diff --git a/lib/irq_poll.c b/lib/irq_poll.c -index 86a709954f5a..6f15787fcb1b 100644 ---- a/lib/irq_poll.c -+++ b/lib/irq_poll.c -@@ -75,7 +75,7 @@ void irq_poll_complete(struct irq_poll *iop) - } - EXPORT_SYMBOL(irq_poll_complete); - --static void __latent_entropy irq_poll_softirq(struct softirq_action *h) -+static void __latent_entropy irq_poll_softirq(void) - { - struct list_head *list = this_cpu_ptr(&blk_cpu_iopoll); - int rearm = 0, budget = irq_poll_budget; -diff --git a/lib/kobject.c b/lib/kobject.c -index bbbb067de8ec..fec2f780cf9b 100644 ---- a/lib/kobject.c -+++ b/lib/kobject.c -@@ -956,9 +956,9 @@ EXPORT_SYMBOL_GPL(kset_create_and_add); - - - static DEFINE_SPINLOCK(kobj_ns_type_lock); --static const struct kobj_ns_type_operations *kobj_ns_ops_tbl[KOBJ_NS_TYPES]; -+static const struct kobj_ns_type_operations *kobj_ns_ops_tbl[KOBJ_NS_TYPES] __ro_after_init; - --int kobj_ns_type_register(const struct kobj_ns_type_operations *ops) -+int __init kobj_ns_type_register(const struct kobj_ns_type_operations *ops) - { - enum kobj_ns_type type = ops->type; - int error; -diff --git a/lib/nlattr.c b/lib/nlattr.c -index 3d8295c85505..3fa3b3409d69 100644 ---- a/lib/nlattr.c -+++ b/lib/nlattr.c -@@ -341,6 +341,8 @@ int nla_memcpy(void *dest, const struct nlattr *src, int count) - { - int minlen = min_t(int, count, nla_len(src)); - -+ BUG_ON(minlen < 0); -+ - memcpy(dest, nla_data(src), minlen); - if (count > minlen) - memset(dest + minlen, 0, count - minlen); -diff --git a/lib/vsprintf.c b/lib/vsprintf.c -index 4a990f3fd345..3df8db5af0ba 100644 ---- a/lib/vsprintf.c -+++ b/lib/vsprintf.c -@@ -1588,7 +1588,7 @@ char *device_node_string(char *buf, char *end, struct device_node *dn, - return widen_string(buf, buf - buf_start, end, spec); - } - --int kptr_restrict __read_mostly; -+int kptr_restrict __read_mostly = 2; - - /* - * Show a '%p' thing. A kernel extension is that the '%p' is followed -diff --git a/mm/Kconfig b/mm/Kconfig -index 59efbd3337e0..c070e14ec83d 100644 ---- a/mm/Kconfig -+++ b/mm/Kconfig -@@ -319,7 +319,8 @@ config KSM - config DEFAULT_MMAP_MIN_ADDR - int "Low address space to protect from user allocation" - depends on MMU -- default 4096 -+ default 32768 if ARM || (ARM64 && COMPAT) -+ default 65536 - help - This is the portion of low virtual memory which should be protected - from userspace allocation. Keeping a user from writing to low pages -diff --git a/mm/mmap.c b/mm/mmap.c -index 2398776195d2..a8ffa2223ad1 100644 ---- a/mm/mmap.c -+++ b/mm/mmap.c -@@ -220,6 +220,13 @@ SYSCALL_DEFINE1(brk, unsigned long, brk) - - newbrk = PAGE_ALIGN(brk); - oldbrk = PAGE_ALIGN(mm->brk); -+ /* properly handle unaligned min_brk as an empty heap */ -+ if (min_brk & ~PAGE_MASK) { -+ if (brk == min_brk) -+ newbrk -= PAGE_SIZE; -+ if (mm->brk == min_brk) -+ oldbrk -= PAGE_SIZE; -+ } - if (oldbrk == newbrk) - goto set_brk; - -diff --git a/mm/page_alloc.c b/mm/page_alloc.c -index a2f365f40433..5e726e59de20 100644 ---- a/mm/page_alloc.c -+++ b/mm/page_alloc.c -@@ -67,6 +67,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -98,6 +99,15 @@ int _node_numa_mem_[MAX_NUMNODES]; - DEFINE_MUTEX(pcpu_drain_mutex); - DEFINE_PER_CPU(struct work_struct, pcpu_drain); - -+bool __meminitdata extra_latent_entropy; -+ -+static int __init setup_extra_latent_entropy(char *str) -+{ -+ extra_latent_entropy = true; -+ return 0; -+} -+early_param("extra_latent_entropy", setup_extra_latent_entropy); -+ - #ifdef CONFIG_GCC_PLUGIN_LATENT_ENTROPY - volatile unsigned long latent_entropy __latent_entropy; - EXPORT_SYMBOL(latent_entropy); -@@ -1063,6 +1073,13 @@ static __always_inline bool free_pages_prepare(struct page *page, - debug_check_no_obj_freed(page_address(page), - PAGE_SIZE << order); - } -+ -+ if (IS_ENABLED(CONFIG_PAGE_SANITIZE)) { -+ int i; -+ for (i = 0; i < (1 << order); i++) -+ clear_highpage(page + i); -+ } -+ - arch_free_page(page, order); - kernel_poison_pages(page, 1 << order, 0); - kernel_map_pages(page, 1 << order, 0); -@@ -1278,6 +1295,21 @@ static void __init __free_pages_boot_core(struct page *page, unsigned int order) - __ClearPageReserved(p); - set_page_count(p, 0); - -+ if (extra_latent_entropy && !PageHighMem(page) && page_to_pfn(page) < 0x100000) { -+ unsigned long hash = 0; -+ size_t index, end = PAGE_SIZE * nr_pages / sizeof hash; -+ const unsigned long *data = lowmem_page_address(page); -+ -+ for (index = 0; index < end; index++) -+ hash ^= hash + data[index]; -+#ifdef CONFIG_GCC_PLUGIN_LATENT_ENTROPY -+ latent_entropy ^= hash; -+ add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy)); -+#else -+ add_device_randomness((const void *)&hash, sizeof(hash)); -+#endif -+ } -+ - page_zone(page)->managed_pages += nr_pages; - set_page_refcounted(page); - __free_pages(page, order); -@@ -1718,8 +1750,8 @@ static inline int check_new_page(struct page *page) - - static inline bool free_pages_prezeroed(void) - { -- return IS_ENABLED(CONFIG_PAGE_POISONING_ZERO) && -- page_poisoning_enabled(); -+ return IS_ENABLED(CONFIG_PAGE_SANITIZE) || -+ (IS_ENABLED(CONFIG_PAGE_POISONING_ZERO) && page_poisoning_enabled()); - } - - #ifdef CONFIG_DEBUG_VM -@@ -1776,6 +1808,11 @@ static void prep_new_page(struct page *page, unsigned int order, gfp_t gfp_flags - - post_alloc_hook(page, order, gfp_flags); - -+ if (IS_ENABLED(CONFIG_PAGE_SANITIZE_VERIFY)) { -+ for (i = 0; i < (1 << order); i++) -+ verify_zero_highpage(page + i); -+ } -+ - if (!free_pages_prezeroed() && (gfp_flags & __GFP_ZERO)) - for (i = 0; i < (1 << order); i++) - clear_highpage(page + i); -diff --git a/mm/slab.h b/mm/slab.h -index 485d9fbb8802..436461588804 100644 ---- a/mm/slab.h -+++ b/mm/slab.h -@@ -311,7 +311,11 @@ static inline bool is_root_cache(struct kmem_cache *s) - static inline bool slab_equal_or_root(struct kmem_cache *s, - struct kmem_cache *p) - { -+#ifdef CONFIG_SLAB_HARDENED -+ return p == s; -+#else - return true; -+#endif - } - - static inline const char *cache_name(struct kmem_cache *s) -@@ -363,18 +367,26 @@ static inline struct kmem_cache *cache_from_obj(struct kmem_cache *s, void *x) - * to not do even the assignment. In that case, slab_equal_or_root - * will also be a constant. - */ -- if (!memcg_kmem_enabled() && -+ if (!IS_ENABLED(CONFIG_SLAB_HARDENED) && -+ !memcg_kmem_enabled() && - !unlikely(s->flags & SLAB_CONSISTENCY_CHECKS)) - return s; - - page = virt_to_head_page(x); -+#ifdef CONFIG_SLAB_HARDENED -+ BUG_ON(!PageSlab(page)); -+#endif - cachep = page->slab_cache; - if (slab_equal_or_root(cachep, s)) - return cachep; - - pr_err("%s: Wrong slab cache. %s but object is from %s\n", - __func__, s->name, cachep->name); -+#ifdef CONFIG_BUG_ON_DATA_CORRUPTION -+ BUG_ON(1); -+#else - WARN_ON_ONCE(1); -+#endif - return s; - } - -@@ -399,7 +411,7 @@ static inline size_t slab_ksize(const struct kmem_cache *s) - * back there or track user information then we can - * only use the space before that information. - */ -- if (s->flags & (SLAB_TYPESAFE_BY_RCU | SLAB_STORE_USER)) -+ if ((s->flags & (SLAB_TYPESAFE_BY_RCU | SLAB_STORE_USER)) || IS_ENABLED(CONFIG_SLAB_CANARY)) - return s->inuse; - /* - * Else we can use all the padding etc for the allocation -diff --git a/mm/slab_common.c b/mm/slab_common.c -index f6764cf162b8..015c8e4df318 100644 ---- a/mm/slab_common.c -+++ b/mm/slab_common.c -@@ -26,10 +26,10 @@ - - #include "slab.h" - --enum slab_state slab_state; -+enum slab_state slab_state __ro_after_init; - LIST_HEAD(slab_caches); - DEFINE_MUTEX(slab_mutex); --struct kmem_cache *kmem_cache; -+struct kmem_cache *kmem_cache __ro_after_init; - - static LIST_HEAD(slab_caches_to_rcu_destroy); - static void slab_caches_to_rcu_destroy_workfn(struct work_struct *work); -@@ -49,7 +49,7 @@ static DECLARE_WORK(slab_caches_to_rcu_destroy_work, - /* - * Merge control. If this is set then no merging of slab caches will occur. - */ --static bool slab_nomerge = !IS_ENABLED(CONFIG_SLAB_MERGE_DEFAULT); -+static bool slab_nomerge __ro_after_init = !IS_ENABLED(CONFIG_SLAB_MERGE_DEFAULT); - - static int __init setup_slab_nomerge(char *str) - { -@@ -931,7 +931,7 @@ EXPORT_SYMBOL(kmalloc_dma_caches); - * of two cache sizes there. The size of larger slabs can be determined using - * fls. - */ --static s8 size_index[24] = { -+static s8 size_index[24] __ro_after_init = { - 3, /* 8 */ - 4, /* 16 */ - 5, /* 24 */ -diff --git a/mm/slub.c b/mm/slub.c -index 220d42e592ef..3decf87b1cf2 100644 ---- a/mm/slub.c -+++ b/mm/slub.c -@@ -125,6 +125,16 @@ static inline int kmem_cache_debug(struct kmem_cache *s) - #endif - } - -+static inline bool has_sanitize(struct kmem_cache *s) -+{ -+ return IS_ENABLED(CONFIG_SLAB_SANITIZE) && !(s->flags & (SLAB_TYPESAFE_BY_RCU | SLAB_POISON)); -+} -+ -+static inline bool has_sanitize_verify(struct kmem_cache *s) -+{ -+ return IS_ENABLED(CONFIG_SLAB_SANITIZE_VERIFY) && has_sanitize(s); -+} -+ - void *fixup_red_left(struct kmem_cache *s, void *p) - { - if (kmem_cache_debug(s) && s->flags & SLAB_RED_ZONE) -@@ -297,6 +307,35 @@ static inline void set_freepointer(struct kmem_cache *s, void *object, void *fp) - *(void **)freeptr_addr = freelist_ptr(s, fp, freeptr_addr); - } - -+#ifdef CONFIG_SLAB_CANARY -+static inline unsigned long *get_canary(struct kmem_cache *s, void *object) -+{ -+ if (s->offset) -+ return object + s->offset + sizeof(void *); -+ return object + s->inuse; -+} -+ -+static inline unsigned long get_canary_value(const void *canary, unsigned long value) -+{ -+ return (value ^ (unsigned long)canary) & CANARY_MASK; -+} -+ -+static inline void set_canary(struct kmem_cache *s, void *object, unsigned long value) -+{ -+ unsigned long *canary = get_canary(s, object); -+ *canary = get_canary_value(canary, value); -+} -+ -+static inline void check_canary(struct kmem_cache *s, void *object, unsigned long value) -+{ -+ unsigned long *canary = get_canary(s, object); -+ BUG_ON(*canary != get_canary_value(canary, value)); -+} -+#else -+#define set_canary(s, object, value) -+#define check_canary(s, object, value) -+#endif -+ - /* Loop over all objects in a slab */ - #define for_each_object(__p, __s, __addr, __objects) \ - for (__p = fixup_red_left(__s, __addr); \ -@@ -484,13 +523,13 @@ static inline void *restore_red_left(struct kmem_cache *s, void *p) - * Debug settings: - */ - #if defined(CONFIG_SLUB_DEBUG_ON) --static int slub_debug = DEBUG_DEFAULT_FLAGS; -+static int slub_debug __ro_after_init = DEBUG_DEFAULT_FLAGS; - #else --static int slub_debug; -+static int slub_debug __ro_after_init; - #endif - --static char *slub_debug_slabs; --static int disable_higher_order_debug; -+static char *slub_debug_slabs __ro_after_init; -+static int disable_higher_order_debug __ro_after_init; - - /* - * slub is about to manipulate internal object metadata. This memory lies -@@ -550,6 +589,9 @@ static struct track *get_track(struct kmem_cache *s, void *object, - else - p = object + s->inuse; - -+ if (IS_ENABLED(CONFIG_SLAB_CANARY)) -+ p = (void *)p + sizeof(void *); -+ - return p + alloc; - } - -@@ -688,6 +730,9 @@ static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p) - else - off = s->inuse; - -+ if (IS_ENABLED(CONFIG_SLAB_CANARY)) -+ off += sizeof(void *); -+ - if (s->flags & SLAB_STORE_USER) - off += 2 * sizeof(struct track); - -@@ -817,6 +862,9 @@ static int check_pad_bytes(struct kmem_cache *s, struct page *page, u8 *p) - /* Freepointer is placed after the object. */ - off += sizeof(void *); - -+ if (IS_ENABLED(CONFIG_SLAB_CANARY)) -+ off += sizeof(void *); -+ - if (s->flags & SLAB_STORE_USER) - /* We also have user information there */ - off += 2 * sizeof(struct track); -@@ -1416,8 +1464,9 @@ static void setup_object(struct kmem_cache *s, struct page *page, - void *object) - { - setup_object_debug(s, page, object); -+ set_canary(s, object, s->random_inactive); - kasan_init_slab_obj(s, object); -- if (unlikely(s->ctor)) { -+ if (unlikely(s->ctor) && !has_sanitize_verify(s)) { - kasan_unpoison_object_data(s, object); - s->ctor(object); - kasan_poison_object_data(s, object); -@@ -2717,9 +2766,21 @@ static __always_inline void *slab_alloc_node(struct kmem_cache *s, - stat(s, ALLOC_FASTPATH); - } - -- if (unlikely(gfpflags & __GFP_ZERO) && object) -+ if (has_sanitize_verify(s) && object) { -+ size_t offset = s->offset ? 0 : sizeof(void *); -+ BUG_ON(memchr_inv(object + offset, 0, s->object_size - offset)); -+ if (s->ctor) -+ s->ctor(object); -+ if (unlikely(gfpflags & __GFP_ZERO) && offset) -+ memset(object, 0, sizeof(void *)); -+ } else if (unlikely(gfpflags & __GFP_ZERO) && object) - memset(object, 0, s->object_size); - -+ if (object) { -+ check_canary(s, object, s->random_inactive); -+ set_canary(s, object, s->random_active); -+ } -+ - slab_post_alloc_hook(s, gfpflags, 1, &object); - - return object; -@@ -2926,6 +2987,27 @@ static __always_inline void do_slab_free(struct kmem_cache *s, - void *tail_obj = tail ? : head; - struct kmem_cache_cpu *c; - unsigned long tid; -+ bool sanitize = has_sanitize(s); -+ -+ if (IS_ENABLED(CONFIG_SLAB_CANARY) || sanitize) { -+ __maybe_unused int offset = s->offset ? 0 : sizeof(void *); -+ void *x = head; -+ -+ while (1) { -+ check_canary(s, x, s->random_active); -+ set_canary(s, x, s->random_inactive); -+ -+ if (sanitize) { -+ memset(x + offset, 0, s->object_size - offset); -+ if (!IS_ENABLED(CONFIG_SLAB_SANITIZE_VERIFY) && s->ctor) -+ s->ctor(x); -+ } -+ if (x == tail_obj) -+ break; -+ x = get_freepointer(s, x); -+ } -+ } -+ - redo: - /* - * Determine the currently cpus per cpu slab. -@@ -3104,7 +3186,7 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size, - void **p) - { - struct kmem_cache_cpu *c; -- int i; -+ int i, k; - - /* memcg and kmem_cache debug support */ - s = slab_pre_alloc_hook(s, flags); -@@ -3141,13 +3223,29 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size, - local_irq_enable(); - - /* Clear memory outside IRQ disabled fastpath loop */ -- if (unlikely(flags & __GFP_ZERO)) { -+ if (has_sanitize_verify(s)) { -+ int j; -+ -+ for (j = 0; j < i; j++) { -+ size_t offset = s->offset ? 0 : sizeof(void *); -+ BUG_ON(memchr_inv(p[j] + offset, 0, s->object_size - offset)); -+ if (s->ctor) -+ s->ctor(p[j]); -+ if (unlikely(flags & __GFP_ZERO) && offset) -+ memset(p[j], 0, sizeof(void *)); -+ } -+ } else if (unlikely(flags & __GFP_ZERO)) { - int j; - - for (j = 0; j < i; j++) - memset(p[j], 0, s->object_size); - } - -+ for (k = 0; k < i; k++) { -+ check_canary(s, p[k], s->random_inactive); -+ set_canary(s, p[k], s->random_active); -+ } -+ - /* memcg and kmem_cache debug support */ - slab_post_alloc_hook(s, flags, size, p); - return i; -@@ -3179,9 +3277,9 @@ EXPORT_SYMBOL(kmem_cache_alloc_bulk); - * and increases the number of allocations possible without having to - * take the list_lock. - */ --static int slub_min_order; --static int slub_max_order = PAGE_ALLOC_COSTLY_ORDER; --static int slub_min_objects; -+static int slub_min_order __ro_after_init; -+static int slub_max_order __ro_after_init = PAGE_ALLOC_COSTLY_ORDER; -+static int slub_min_objects __ro_after_init; - - /* - * Calculate the order of allocation given an slab object size. -@@ -3351,6 +3449,7 @@ static void early_kmem_cache_node_alloc(int node) - init_object(kmem_cache_node, n, SLUB_RED_ACTIVE); - init_tracking(kmem_cache_node, n); - #endif -+ set_canary(kmem_cache_node, n, kmem_cache_node->random_active); - kasan_kmalloc(kmem_cache_node, n, sizeof(struct kmem_cache_node), - GFP_KERNEL); - init_kmem_cache_node(n); -@@ -3507,6 +3606,9 @@ static int calculate_sizes(struct kmem_cache *s, int forced_order) - size += sizeof(void *); - } - -+ if (IS_ENABLED(CONFIG_SLAB_CANARY)) -+ size += sizeof(void *); -+ - #ifdef CONFIG_SLUB_DEBUG - if (flags & SLAB_STORE_USER) - /* -@@ -3577,6 +3679,10 @@ static int kmem_cache_open(struct kmem_cache *s, unsigned long flags) - #ifdef CONFIG_SLAB_FREELIST_HARDENED - s->random = get_random_long(); - #endif -+#ifdef CONFIG_SLAB_CANARY -+ s->random_active = get_random_long(); -+ s->random_inactive = get_random_long(); -+#endif - - if (need_reserve_slab_rcu && (s->flags & SLAB_TYPESAFE_BY_RCU)) - s->reserved = sizeof(struct rcu_head); -@@ -3841,6 +3947,8 @@ const char *__check_heap_object(const void *ptr, unsigned long n, - offset -= s->red_left_pad; - } - -+ check_canary(s, (void *)ptr - offset, s->random_active); -+ - /* Allow address range falling entirely within object size. */ - if (offset <= object_size && n <= object_size - offset) - return NULL; -@@ -3859,7 +3967,11 @@ static size_t __ksize(const void *object) - page = virt_to_head_page(object); - - if (unlikely(!PageSlab(page))) { -+#ifdef CONFIG_BUG_ON_DATA_CORRUPTION -+ BUG_ON(!PageCompound(page)); -+#else - WARN_ON(!PageCompound(page)); -+#endif - return PAGE_SIZE << compound_order(page); - } - -@@ -4724,7 +4836,7 @@ enum slab_stat_type { - #define SO_TOTAL (1 << SL_TOTAL) - - #ifdef CONFIG_MEMCG --static bool memcg_sysfs_enabled = IS_ENABLED(CONFIG_SLUB_MEMCG_SYSFS_ON); -+static bool memcg_sysfs_enabled __ro_after_init = IS_ENABLED(CONFIG_SLUB_MEMCG_SYSFS_ON); - - static int __init setup_slub_memcg_sysfs(char *str) - { -diff --git a/mm/swap.c b/mm/swap.c -index a77d68f2c1b6..d1f1d75f4d1f 100644 ---- a/mm/swap.c -+++ b/mm/swap.c -@@ -92,6 +92,13 @@ static void __put_compound_page(struct page *page) - if (!PageHuge(page)) - __page_cache_release(page); - dtor = get_compound_page_dtor(page); -+ if (!PageHuge(page)) -+ BUG_ON(dtor != free_compound_page -+#ifdef CONFIG_TRANSPARENT_HUGEPAGE -+ && dtor != free_transhuge_page -+#endif -+ ); -+ - (*dtor)(page); - } - -diff --git a/net/core/dev.c b/net/core/dev.c -index 4337450a5fdb..5a3c7d217719 100644 ---- a/net/core/dev.c -+++ b/net/core/dev.c -@@ -4117,7 +4117,7 @@ int netif_rx_ni(struct sk_buff *skb) - } - EXPORT_SYMBOL(netif_rx_ni); - --static __latent_entropy void net_tx_action(struct softirq_action *h) -+static __latent_entropy void net_tx_action(void) - { - struct softnet_data *sd = this_cpu_ptr(&softnet_data); - -@@ -5635,7 +5635,7 @@ static int napi_poll(struct napi_struct *n, struct list_head *repoll) - return work; - } - --static __latent_entropy void net_rx_action(struct softirq_action *h) -+static __latent_entropy void net_rx_action(void) - { - struct softnet_data *sd = this_cpu_ptr(&softnet_data); - unsigned long time_limit = jiffies + -diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig -index f48fe6fc7e8c..d78c52835c08 100644 ---- a/net/ipv4/Kconfig -+++ b/net/ipv4/Kconfig -@@ -261,6 +261,7 @@ config IP_PIMSM_V2 - - config SYN_COOKIES - bool "IP: TCP syncookie support" -+ default y - ---help--- - Normal TCP/IP networking is open to an attack known as "SYN - flooding". This denial-of-service attack prevents legitimate remote -diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c -index 18bc8738e989..d2866f6dd736 100644 ---- a/scripts/mod/modpost.c -+++ b/scripts/mod/modpost.c -@@ -37,6 +37,7 @@ static int vmlinux_section_warnings = 1; - static int warn_unresolved = 0; - /* How a symbol is exported */ - static int sec_mismatch_count = 0; -+static int writable_fptr_count = 0; - static int sec_mismatch_verbose = 1; - static int sec_mismatch_fatal = 0; - /* ignore missing files */ -@@ -965,6 +966,7 @@ enum mismatch { - ANY_EXIT_TO_ANY_INIT, - EXPORT_TO_INIT_EXIT, - EXTABLE_TO_NON_TEXT, -+ DATA_TO_TEXT - }; - - /** -@@ -1091,6 +1093,12 @@ static const struct sectioncheck sectioncheck[] = { - .good_tosec = {ALL_TEXT_SECTIONS , NULL}, - .mismatch = EXTABLE_TO_NON_TEXT, - .handler = extable_mismatch_handler, -+}, -+/* Do not reference code from writable data */ -+{ -+ .fromsec = { DATA_SECTIONS, NULL }, -+ .bad_tosec = { ALL_TEXT_SECTIONS, NULL }, -+ .mismatch = DATA_TO_TEXT - } - }; - -@@ -1240,10 +1248,10 @@ static Elf_Sym *find_elf_symbol(struct elf_info *elf, Elf64_Sword addr, - continue; - if (ELF_ST_TYPE(sym->st_info) == STT_SECTION) - continue; -- if (sym->st_value == addr) -- return sym; - /* Find a symbol nearby - addr are maybe negative */ - d = sym->st_value - addr; -+ if (d == 0) -+ return sym; - if (d < 0) - d = addr - sym->st_value; - if (d < distance) { -@@ -1402,7 +1410,11 @@ static void report_sec_mismatch(const char *modname, - char *prl_from; - char *prl_to; - -- sec_mismatch_count++; -+ if (mismatch->mismatch == DATA_TO_TEXT) -+ writable_fptr_count++; -+ else -+ sec_mismatch_count++; -+ - if (!sec_mismatch_verbose) - return; - -@@ -1526,6 +1538,14 @@ static void report_sec_mismatch(const char *modname, - fatal("There's a special handler for this mismatch type, " - "we should never get here."); - break; -+ case DATA_TO_TEXT: -+#if 0 -+ fprintf(stderr, -+ "The %s %s:%s references\n" -+ "the %s %s:%s%s\n", -+ from, fromsec, fromsym, to, tosec, tosym, to_p); -+#endif -+ break; - } - fprintf(stderr, "\n"); - } -@@ -2539,6 +2559,14 @@ int main(int argc, char **argv) - } - } - free(buf.p); -+ if (writable_fptr_count) { -+ if (!sec_mismatch_verbose) { -+ warn("modpost: Found %d writable function pointer(s).\n" -+ "To see full details build your kernel with:\n" -+ "'make CONFIG_DEBUG_SECTION_MISMATCH=y'\n", -+ writable_fptr_count); -+ } -+ } - - return err; - } -diff --git a/security/Kconfig b/security/Kconfig -index 87f2a6f842fd..7bdbb7edf5bf 100644 ---- a/security/Kconfig -+++ b/security/Kconfig -@@ -8,7 +8,7 @@ source security/keys/Kconfig - - config SECURITY_DMESG_RESTRICT - bool "Restrict unprivileged access to the kernel syslog" -- default n -+ default y - help - This enforces restrictions on unprivileged users reading the kernel - syslog via dmesg(8). -@@ -18,10 +18,34 @@ config SECURITY_DMESG_RESTRICT - - If you are unsure how to answer this question, answer N. - -+config SECURITY_PERF_EVENTS_RESTRICT -+ bool "Restrict unprivileged use of performance events" -+ depends on PERF_EVENTS -+ default y -+ help -+ If you say Y here, the kernel.perf_event_paranoid sysctl -+ will be set to 3 by default, and no unprivileged use of the -+ perf_event_open syscall will be permitted unless it is -+ changed. -+ -+config SECURITY_TIOCSTI_RESTRICT -+ bool "Restrict unprivileged use of tiocsti command injection" -+ default y -+ help -+ This enforces restrictions on unprivileged users injecting commands -+ into other processes which share a tty session using the TIOCSTI -+ ioctl. This option makes TIOCSTI use require CAP_SYS_ADMIN. -+ -+ If this option is not selected, no restrictions will be enforced -+ unless the tiocsti_restrict sysctl is explicitly set to (1). -+ -+ If you are unsure how to answer this question, answer N. -+ - config SECURITY - bool "Enable different security models" - depends on SYSFS - depends on MULTIUSER -+ default y - help - This allows you to choose different security modules to be - configured into your kernel. -@@ -48,6 +72,7 @@ config SECURITYFS - config SECURITY_NETWORK - bool "Socket and Networking Security Hooks" - depends on SECURITY -+ default y - help - This enables the socket and networking security hooks. - If enabled, a security module can use these hooks to -@@ -155,6 +180,7 @@ config HARDENED_USERCOPY - depends on HAVE_HARDENED_USERCOPY_ALLOCATOR - select BUG - imply STRICT_DEVMEM -+ default y - help - This option checks for obviously wrong memory regions when - copying memory to/from the kernel (via copy_to_user() and -@@ -178,10 +204,36 @@ config HARDENED_USERCOPY_PAGESPAN - config FORTIFY_SOURCE - bool "Harden common str/mem functions against buffer overflows" - depends on ARCH_HAS_FORTIFY_SOURCE -+ default y - help - Detect overflows of buffers in common string and memory functions - where the compiler can determine and validate the buffer sizes. - -+config FORTIFY_SOURCE_STRICT_STRING -+ bool "Harden common functions against buffer overflows" -+ depends on FORTIFY_SOURCE -+ depends on EXPERT -+ help -+ Perform stricter overflow checks catching overflows within objects -+ for common C string functions rather than only between objects. -+ -+ This is not yet intended for production use, only bug finding. -+ -+config PAGE_SANITIZE -+ bool "Sanitize pages" -+ default y -+ help -+ Zero fill page allocations on free, reducing the lifetime of -+ sensitive data and helping to mitigate use-after-free bugs. -+ -+config PAGE_SANITIZE_VERIFY -+ bool "Verify sanitized pages" -+ depends on PAGE_SANITIZE -+ default y -+ help -+ Verify that newly allocated pages are zeroed to detect -+ write-after-free bugs. -+ - config STATIC_USERMODEHELPER - bool "Force all usermode helper calls through a single binary" - help -diff --git a/security/selinux/Kconfig b/security/selinux/Kconfig -index 8af7a690eb40..6539694b0fd3 100644 ---- a/security/selinux/Kconfig -+++ b/security/selinux/Kconfig -@@ -2,7 +2,7 @@ config SECURITY_SELINUX - bool "NSA SELinux Support" - depends on SECURITY_NETWORK && AUDIT && NET && INET - select NETWORK_SECMARK -- default n -+ default y - help - This selects NSA Security-Enhanced Linux (SELinux). - You will also need a policy configuration and a labeled filesystem. -@@ -79,23 +79,3 @@ config SECURITY_SELINUX_AVC_STATS - This option collects access vector cache statistics to - /selinux/avc/cache_stats, which may be monitored via - tools such as avcstat. -- --config SECURITY_SELINUX_CHECKREQPROT_VALUE -- int "NSA SELinux checkreqprot default value" -- depends on SECURITY_SELINUX -- range 0 1 -- default 0 -- help -- This option sets the default value for the 'checkreqprot' flag -- that determines whether SELinux checks the protection requested -- by the application or the protection that will be applied by the -- kernel (including any implied execute for read-implies-exec) for -- mmap and mprotect calls. If this option is set to 0 (zero), -- SELinux will default to checking the protection that will be applied -- by the kernel. If this option is set to 1 (one), SELinux will -- default to checking the protection requested by the application. -- The checkreqprot flag may be changed from the default via the -- 'checkreqprot=' boot parameter. It may also be changed at runtime -- via /selinux/checkreqprot if authorized by policy. -- -- If you are unsure how to answer this question, answer 0. -diff --git a/security/selinux/include/objsec.h b/security/selinux/include/objsec.h -index 1649cd18eb0b..067f35559aa7 100644 ---- a/security/selinux/include/objsec.h -+++ b/security/selinux/include/objsec.h -@@ -150,6 +150,6 @@ struct pkey_security_struct { - u32 sid; /* SID of pkey */ - }; - --extern unsigned int selinux_checkreqprot; -+extern const unsigned int selinux_checkreqprot; - - #endif /* _SELINUX_OBJSEC_H_ */ -diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c -index 00eed842c491..8f7b8d7e6f91 100644 ---- a/security/selinux/selinuxfs.c -+++ b/security/selinux/selinuxfs.c -@@ -41,16 +41,7 @@ - #include "objsec.h" - #include "conditional.h" - --unsigned int selinux_checkreqprot = CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE; -- --static int __init checkreqprot_setup(char *str) --{ -- unsigned long checkreqprot; -- if (!kstrtoul(str, 0, &checkreqprot)) -- selinux_checkreqprot = checkreqprot ? 1 : 0; -- return 1; --} --__setup("checkreqprot=", checkreqprot_setup); -+const unsigned int selinux_checkreqprot; - - static DEFINE_MUTEX(sel_mutex); - -@@ -610,10 +601,9 @@ static ssize_t sel_write_checkreqprot(struct file *file, const char __user *buf, - return PTR_ERR(page); - - length = -EINVAL; -- if (sscanf(page, "%u", &new_value) != 1) -+ if (sscanf(page, "%u", &new_value) != 1 || new_value) - goto out; - -- selinux_checkreqprot = new_value ? 1 : 0; - length = count; - out: - kfree(page); -diff --git a/security/yama/Kconfig b/security/yama/Kconfig -index 96b27405558a..485c1b85c325 100644 ---- a/security/yama/Kconfig -+++ b/security/yama/Kconfig -@@ -1,7 +1,7 @@ - config SECURITY_YAMA - bool "Yama support" - depends on SECURITY -- default n -+ default y - help - This selects Yama, which extends DAC support with additional - system-wide security settings beyond regular Linux discretionary diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-mute-pps_state_mismatch.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-mute-pps_state_mismatch.patch deleted file mode 100644 index dc1d254b..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-mute-pps_state_mismatch.patch +++ /dev/null @@ -1,16 +0,0 @@ -diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c -index 09f274419..595bc5844 100644 ---- a/drivers/gpu/drm/i915/intel_dp.c -+++ b/drivers/gpu/drm/i915/intel_dp.c -@@ -5249,7 +5249,10 @@ intel_pps_verify_state(struct drm_i915_private *dev_priv, - - if (hw.t1_t3 != sw->t1_t3 || hw.t8 != sw->t8 || hw.t9 != sw->t9 || - hw.t10 != sw->t10 || hw.t11_t12 != sw->t11_t12) { -- DRM_ERROR("PPS state mismatch\n"); -+ /* seem buggy on 4.14.x .. mute that for now -+ * even is not a real solution .. -+ * DRM_ERROR("PPS state mismatch\n"); -+ */ - intel_pps_dump_state("sw", sw); - intel_pps_dump_state("hw", &hw); - } diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-restore-SD_PREFER_SIBLING-on-MC-domains.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-restore-SD_PREFER_SIBLING-on-MC-domains.patch deleted file mode 100644 index b6be46cc..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-restore-SD_PREFER_SIBLING-on-MC-domains.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c -index 093f2ceba..808998fe1 100644 ---- a/kernel/sched/topology.c -+++ b/kernel/sched/topology.c -@@ -1164,6 +1164,7 @@ sd_init(struct sched_domain_topology_level *tl, - sd->smt_gain = 1178; /* ~15% */ - - } else if (sd->flags & SD_SHARE_PKG_RESOURCES) { -+ sd->flags |= SD_PREFER_SIBLING; - sd->imbalance_pct = 117; - sd->cache_nice_tries = 1; - sd->busy_idx = 2; diff --git a/sys-kernel/linux-image-redcore-lts/files/4.14-uksm-linux-hardened.patch b/sys-kernel/linux-image-redcore-lts/files/4.14-uksm-linux-hardened.patch deleted file mode 100644 index f0596117..00000000 --- a/sys-kernel/linux-image-redcore-lts/files/4.14-uksm-linux-hardened.patch +++ /dev/null @@ -1,6919 +0,0 @@ -diff -Nur a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX ---- a/Documentation/vm/00-INDEX 2018-05-25 15:18:02.000000000 +0100 -+++ b/Documentation/vm/00-INDEX 2018-05-26 19:30:55.783140311 +0100 -@@ -20,6 +20,8 @@ - - description of the idle page tracking feature. - ksm.txt - - how to use the Kernel Samepage Merging feature. -+uksm.txt -+ - Introduction to Ultra KSM - numa - - information about NUMA specific code in the Linux vm. - numa_memory_policy.txt -diff -Nur a/Documentation/vm/uksm.txt b/Documentation/vm/uksm.txt ---- a/Documentation/vm/uksm.txt 1970-01-01 01:00:00.000000000 +0100 -+++ b/Documentation/vm/uksm.txt 2018-05-26 19:30:55.783140311 +0100 -@@ -0,0 +1,61 @@ -+The Ultra Kernel Samepage Merging feature -+---------------------------------------------- -+/* -+ * Ultra KSM. Copyright (C) 2011-2012 Nai Xia -+ * -+ * This is an improvement upon KSM. Some basic data structures and routines -+ * are borrowed from ksm.c . -+ * -+ * Its new features: -+ * 1. Full system scan: -+ * It automatically scans all user processes' anonymous VMAs. Kernel-user -+ * interaction to submit a memory area to KSM is no longer needed. -+ * -+ * 2. Rich area detection: -+ * It automatically detects rich areas containing abundant duplicated -+ * pages based. Rich areas are given a full scan speed. Poor areas are -+ * sampled at a reasonable speed with very low CPU consumption. -+ * -+ * 3. Ultra Per-page scan speed improvement: -+ * A new hash algorithm is proposed. As a result, on a machine with -+ * Core(TM)2 Quad Q9300 CPU in 32-bit mode and 800MHZ DDR2 main memory, it -+ * can scan memory areas that does not contain duplicated pages at speed of -+ * 627MB/sec ~ 2445MB/sec and can merge duplicated areas at speed of -+ * 477MB/sec ~ 923MB/sec. -+ * -+ * 4. Thrashing area avoidance: -+ * Thrashing area(an VMA that has frequent Ksm page break-out) can be -+ * filtered out. My benchmark shows it's more efficient than KSM's per-page -+ * hash value based volatile page detection. -+ * -+ * -+ * 5. Misc changes upon KSM: -+ * * It has a fully x86-opitmized memcmp dedicated for 4-byte-aligned page -+ * comparison. It's much faster than default C version on x86. -+ * * rmap_item now has an struct *page member to loosely cache a -+ * address-->page mapping, which reduces too much time-costly -+ * follow_page(). -+ * * The VMA creation/exit procedures are hooked to let the Ultra KSM know. -+ * * try_to_merge_two_pages() now can revert a pte if it fails. No break_ -+ * ksm is needed for this case. -+ * -+ * 6. Full Zero Page consideration(contributed by Figo Zhang) -+ * Now uksmd consider full zero pages as special pages and merge them to an -+ * special unswappable uksm zero page. -+ */ -+ -+ChangeLog: -+ -+2012-05-05 The creation of this Doc -+2012-05-08 UKSM 0.1.1.1 libc crash bug fix, api clean up, doc clean up. -+2012-05-28 UKSM 0.1.1.2 bug fix release -+2012-06-26 UKSM 0.1.2-beta1 first beta release for 0.1.2 -+2012-07-2 UKSM 0.1.2-beta2 -+2012-07-10 UKSM 0.1.2-beta3 -+2012-07-26 UKSM 0.1.2 Fine grained speed control, more scan optimization. -+2012-10-13 UKSM 0.1.2.1 Bug fixes. -+2012-12-31 UKSM 0.1.2.2 Minor bug fixes. -+2014-07-02 UKSM 0.1.2.3 Fix a " __this_cpu_read() in preemptible bug". -+2015-04-22 UKSM 0.1.2.4 Fix a race condition that can sometimes trigger anonying warnings. -+2016-09-10 UKSM 0.1.2.5 Fix a bug in dedup ratio calculation. -+2017-02-26 UKSM 0.1.2.6 Fix a bug in hugetlbpage handling and a race bug with page migration. -diff -Nur a/fs/exec.c b/fs/exec.c ---- a/fs/exec.c 2018-05-26 19:24:34.831782903 +0100 -+++ b/fs/exec.c 2018-05-26 19:31:18.404873956 +0100 -@@ -63,6 +63,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -1377,6 +1378,7 @@ - /* An exec changes our domain. We are no longer part of the thread - group */ - current->self_exec_id++; -+ - flush_signal_handlers(current, 0); - } - EXPORT_SYMBOL(setup_new_exec); -diff -Nur a/fs/proc/meminfo.c b/fs/proc/meminfo.c ---- a/fs/proc/meminfo.c 2018-05-25 15:18:02.000000000 +0100 -+++ b/fs/proc/meminfo.c 2018-05-26 19:30:55.784140344 +0100 -@@ -118,6 +118,10 @@ - global_zone_page_state(NR_KERNEL_STACK_KB)); - show_val_kb(m, "PageTables: ", - global_zone_page_state(NR_PAGETABLE)); -+#ifdef CONFIG_UKSM -+ show_val_kb(m, "KsmZeroPages: ", -+ global_zone_page_state(NR_UKSM_ZERO_PAGES)); -+#endif - #ifdef CONFIG_QUICKLIST - show_val_kb(m, "Quicklists: ", quicklist_total_size()); - #endif -diff -Nur a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h ---- a/include/asm-generic/pgtable.h 2018-05-25 15:18:02.000000000 +0100 -+++ b/include/asm-generic/pgtable.h 2018-05-26 19:30:55.784140344 +0100 -@@ -789,12 +789,25 @@ - extern void untrack_pfn_moved(struct vm_area_struct *vma); - #endif - -+#ifdef CONFIG_UKSM -+static inline int is_uksm_zero_pfn(unsigned long pfn) -+{ -+ extern unsigned long uksm_zero_pfn; -+ return pfn == uksm_zero_pfn; -+} -+#else -+static inline int is_uksm_zero_pfn(unsigned long pfn) -+{ -+ return 0; -+} -+#endif -+ - #ifdef __HAVE_COLOR_ZERO_PAGE - static inline int is_zero_pfn(unsigned long pfn) - { - extern unsigned long zero_pfn; - unsigned long offset_from_zero_pfn = pfn - zero_pfn; -- return offset_from_zero_pfn <= (zero_page_mask >> PAGE_SHIFT); -+ return offset_from_zero_pfn <= (zero_page_mask >> PAGE_SHIFT) || is_uksm_zero_pfn(pfn); - } - - #define my_zero_pfn(addr) page_to_pfn(ZERO_PAGE(addr)) -@@ -803,7 +816,7 @@ - static inline int is_zero_pfn(unsigned long pfn) - { - extern unsigned long zero_pfn; -- return pfn == zero_pfn; -+ return (pfn == zero_pfn) || (is_uksm_zero_pfn(pfn)); - } - - static inline unsigned long my_zero_pfn(unsigned long addr) -diff -Nur a/include/linux/ksm.h b/include/linux/ksm.h ---- a/include/linux/ksm.h 2018-05-25 15:18:02.000000000 +0100 -+++ b/include/linux/ksm.h 2018-05-26 19:30:55.784140344 +0100 -@@ -21,21 +21,6 @@ - #ifdef CONFIG_KSM - int ksm_madvise(struct vm_area_struct *vma, unsigned long start, - unsigned long end, int advice, unsigned long *vm_flags); --int __ksm_enter(struct mm_struct *mm); --void __ksm_exit(struct mm_struct *mm); -- --static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm) --{ -- if (test_bit(MMF_VM_MERGEABLE, &oldmm->flags)) -- return __ksm_enter(mm); -- return 0; --} -- --static inline void ksm_exit(struct mm_struct *mm) --{ -- if (test_bit(MMF_VM_MERGEABLE, &mm->flags)) -- __ksm_exit(mm); --} - - static inline struct stable_node *page_stable_node(struct page *page) - { -@@ -65,6 +50,33 @@ - void rmap_walk_ksm(struct page *page, struct rmap_walk_control *rwc); - void ksm_migrate_page(struct page *newpage, struct page *oldpage); - -+#ifdef CONFIG_KSM_LEGACY -+int __ksm_enter(struct mm_struct *mm); -+void __ksm_exit(struct mm_struct *mm); -+static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm) -+{ -+ if (test_bit(MMF_VM_MERGEABLE, &oldmm->flags)) -+ return __ksm_enter(mm); -+ return 0; -+} -+ -+static inline void ksm_exit(struct mm_struct *mm) -+{ -+ if (test_bit(MMF_VM_MERGEABLE, &mm->flags)) -+ __ksm_exit(mm); -+} -+ -+#elif defined(CONFIG_UKSM) -+static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm) -+{ -+ return 0; -+} -+ -+static inline void ksm_exit(struct mm_struct *mm) -+{ -+} -+#endif /* !CONFIG_UKSM */ -+ - #else /* !CONFIG_KSM */ - - static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm) -@@ -106,4 +118,6 @@ - #endif /* CONFIG_MMU */ - #endif /* !CONFIG_KSM */ - -+#include -+ - #endif /* __LINUX_KSM_H */ -diff -Nur a/include/linux/mm_types.h b/include/linux/mm_types.h ---- a/include/linux/mm_types.h 2018-05-25 15:18:02.000000000 +0100 -+++ b/include/linux/mm_types.h 2018-05-26 19:30:55.784140344 +0100 -@@ -337,6 +337,9 @@ - struct mempolicy *vm_policy; /* NUMA policy for the VMA */ - #endif - struct vm_userfaultfd_ctx vm_userfaultfd_ctx; -+#ifdef CONFIG_UKSM -+ struct vma_slot *uksm_vma_slot; -+#endif - } __randomize_layout; - - struct core_thread { -diff -Nur a/include/linux/mmzone.h b/include/linux/mmzone.h ---- a/include/linux/mmzone.h 2018-05-25 15:18:02.000000000 +0100 -+++ b/include/linux/mmzone.h 2018-05-26 19:30:55.785140376 +0100 -@@ -148,6 +148,9 @@ - NR_ZSPAGES, /* allocated in zsmalloc */ - #endif - NR_FREE_CMA_PAGES, -+#ifdef CONFIG_UKSM -+ NR_UKSM_ZERO_PAGES, -+#endif - NR_VM_ZONE_STAT_ITEMS }; - - enum node_stat_item { -@@ -872,7 +875,7 @@ - } - - /** -- * is_highmem - helper function to quickly check if a struct zone is a -+ * is_highmem - helper function to quickly check if a struct zone is a - * highmem zone or not. This is an attempt to keep references - * to ZONE_{DMA/NORMAL/HIGHMEM/etc} in general code to a minimum. - * @zone - pointer to struct zone variable -diff -Nur a/include/linux/sradix-tree.h b/include/linux/sradix-tree.h ---- a/include/linux/sradix-tree.h 1970-01-01 01:00:00.000000000 +0100 -+++ b/include/linux/sradix-tree.h 2018-05-26 19:30:55.785140376 +0100 -@@ -0,0 +1,77 @@ -+#ifndef _LINUX_SRADIX_TREE_H -+#define _LINUX_SRADIX_TREE_H -+ -+ -+#define INIT_SRADIX_TREE(root, mask) \ -+do { \ -+ (root)->height = 0; \ -+ (root)->gfp_mask = (mask); \ -+ (root)->rnode = NULL; \ -+} while (0) -+ -+#define ULONG_BITS (sizeof(unsigned long) * 8) -+#define SRADIX_TREE_INDEX_BITS (8 /* CHAR_BIT */ * sizeof(unsigned long)) -+//#define SRADIX_TREE_MAP_SHIFT 6 -+//#define SRADIX_TREE_MAP_SIZE (1UL << SRADIX_TREE_MAP_SHIFT) -+//#define SRADIX_TREE_MAP_MASK (SRADIX_TREE_MAP_SIZE-1) -+ -+struct sradix_tree_node { -+ unsigned int height; /* Height from the bottom */ -+ unsigned int count; -+ unsigned int fulls; /* Number of full sublevel trees */ -+ struct sradix_tree_node *parent; -+ void *stores[0]; -+}; -+ -+/* A simple radix tree implementation */ -+struct sradix_tree_root { -+ unsigned int height; -+ struct sradix_tree_node *rnode; -+ -+ /* Where found to have available empty stores in its sublevels */ -+ struct sradix_tree_node *enter_node; -+ unsigned int shift; -+ unsigned int stores_size; -+ unsigned int mask; -+ unsigned long min; /* The first hole index */ -+ unsigned long num; -+ //unsigned long *height_to_maxindex; -+ -+ /* How the node is allocated and freed. */ -+ struct sradix_tree_node *(*alloc)(void); -+ void (*free)(struct sradix_tree_node *node); -+ -+ /* When a new node is added and removed */ -+ void (*extend)(struct sradix_tree_node *parent, struct sradix_tree_node *child); -+ void (*assign)(struct sradix_tree_node *node, unsigned int index, void *item); -+ void (*rm)(struct sradix_tree_node *node, unsigned int offset); -+}; -+ -+struct sradix_tree_path { -+ struct sradix_tree_node *node; -+ int offset; -+}; -+ -+static inline -+void init_sradix_tree_root(struct sradix_tree_root *root, unsigned long shift) -+{ -+ root->height = 0; -+ root->rnode = NULL; -+ root->shift = shift; -+ root->stores_size = 1UL << shift; -+ root->mask = root->stores_size - 1; -+} -+ -+ -+extern void *sradix_tree_next(struct sradix_tree_root *root, -+ struct sradix_tree_node *node, unsigned long index, -+ int (*iter)(void *, unsigned long)); -+ -+extern int sradix_tree_enter(struct sradix_tree_root *root, void **item, int num); -+ -+extern void sradix_tree_delete_from_leaf(struct sradix_tree_root *root, -+ struct sradix_tree_node *node, unsigned long index); -+ -+extern void *sradix_tree_lookup(struct sradix_tree_root *root, unsigned long index); -+ -+#endif /* _LINUX_SRADIX_TREE_H */ -diff -Nur a/include/linux/uksm.h b/include/linux/uksm.h ---- a/include/linux/uksm.h 1970-01-01 01:00:00.000000000 +0100 -+++ b/include/linux/uksm.h 2018-05-26 19:30:55.785140376 +0100 -@@ -0,0 +1,149 @@ -+#ifndef __LINUX_UKSM_H -+#define __LINUX_UKSM_H -+/* -+ * Memory merging support. -+ * -+ * This code enables dynamic sharing of identical pages found in different -+ * memory areas, even if they are not shared by fork(). -+ */ -+ -+/* if !CONFIG_UKSM this file should not be compiled at all. */ -+#ifdef CONFIG_UKSM -+ -+#include -+#include -+#include -+#include -+#include -+ -+extern unsigned long zero_pfn __read_mostly; -+extern unsigned long uksm_zero_pfn __read_mostly; -+extern struct page *empty_uksm_zero_page; -+ -+/* must be done before linked to mm */ -+extern void uksm_vma_add_new(struct vm_area_struct *vma); -+extern void uksm_remove_vma(struct vm_area_struct *vma); -+ -+#define UKSM_SLOT_NEED_SORT (1 << 0) -+#define UKSM_SLOT_NEED_RERAND (1 << 1) -+#define UKSM_SLOT_SCANNED (1 << 2) /* It's scanned in this round */ -+#define UKSM_SLOT_FUL_SCANNED (1 << 3) -+#define UKSM_SLOT_IN_UKSM (1 << 4) -+ -+struct vma_slot { -+ struct sradix_tree_node *snode; -+ unsigned long sindex; -+ -+ struct list_head slot_list; -+ unsigned long fully_scanned_round; -+ unsigned long dedup_num; -+ unsigned long pages_scanned; -+ unsigned long this_sampled; -+ unsigned long last_scanned; -+ unsigned long pages_to_scan; -+ struct scan_rung *rung; -+ struct page **rmap_list_pool; -+ unsigned int *pool_counts; -+ unsigned long pool_size; -+ struct vm_area_struct *vma; -+ struct mm_struct *mm; -+ unsigned long ctime_j; -+ unsigned long pages; -+ unsigned long flags; -+ unsigned long pages_cowed; /* pages cowed this round */ -+ unsigned long pages_merged; /* pages merged this round */ -+ unsigned long pages_bemerged; -+ -+ /* when it has page merged in this eval round */ -+ struct list_head dedup_list; -+}; -+ -+static inline void uksm_unmap_zero_page(pte_t pte) -+{ -+ if (pte_pfn(pte) == uksm_zero_pfn) -+ __dec_zone_page_state(empty_uksm_zero_page, NR_UKSM_ZERO_PAGES); -+} -+ -+static inline void uksm_map_zero_page(pte_t pte) -+{ -+ if (pte_pfn(pte) == uksm_zero_pfn) -+ __inc_zone_page_state(empty_uksm_zero_page, NR_UKSM_ZERO_PAGES); -+} -+ -+static inline void uksm_cow_page(struct vm_area_struct *vma, struct page *page) -+{ -+ if (vma->uksm_vma_slot && PageKsm(page)) -+ vma->uksm_vma_slot->pages_cowed++; -+} -+ -+static inline void uksm_cow_pte(struct vm_area_struct *vma, pte_t pte) -+{ -+ if (vma->uksm_vma_slot && pte_pfn(pte) == uksm_zero_pfn) -+ vma->uksm_vma_slot->pages_cowed++; -+} -+ -+static inline int uksm_flags_can_scan(unsigned long vm_flags) -+{ -+#ifdef VM_SAO -+ if (vm_flags & VM_SAO) -+ return 0; -+#endif -+ -+ return !(vm_flags & (VM_PFNMAP | VM_IO | VM_DONTEXPAND | -+ VM_HUGETLB | VM_MIXEDMAP | VM_SHARED -+ | VM_MAYSHARE | VM_GROWSUP | VM_GROWSDOWN)); -+} -+ -+static inline void uksm_vm_flags_mod(unsigned long *vm_flags_p) -+{ -+ if (uksm_flags_can_scan(*vm_flags_p)) -+ *vm_flags_p |= VM_MERGEABLE; -+} -+ -+/* -+ * Just a wrapper for BUG_ON for where ksm_zeropage must not be. TODO: it will -+ * be removed when uksm zero page patch is stable enough. -+ */ -+static inline void uksm_bugon_zeropage(pte_t pte) -+{ -+ BUG_ON(pte_pfn(pte) == uksm_zero_pfn); -+} -+#else -+static inline void uksm_vma_add_new(struct vm_area_struct *vma) -+{ -+} -+ -+static inline void uksm_remove_vma(struct vm_area_struct *vma) -+{ -+} -+ -+static inline void uksm_unmap_zero_page(pte_t pte) -+{ -+} -+ -+static inline void uksm_map_zero_page(pte_t pte) -+{ -+} -+ -+static inline void uksm_cow_page(struct vm_area_struct *vma, struct page *page) -+{ -+} -+ -+static inline void uksm_cow_pte(struct vm_area_struct *vma, pte_t pte) -+{ -+} -+ -+static inline int uksm_flags_can_scan(unsigned long vm_flags) -+{ -+ return 0; -+} -+ -+static inline void uksm_vm_flags_mod(unsigned long *vm_flags_p) -+{ -+} -+ -+static inline void uksm_bugon_zeropage(pte_t pte) -+{ -+} -+#endif /* !CONFIG_UKSM */ -+#endif /* __LINUX_UKSM_H */ -diff -Nur a/kernel/fork.c b/kernel/fork.c ---- a/kernel/fork.c 2018-05-26 19:24:34.840783196 +0100 -+++ b/kernel/fork.c 2018-05-26 19:30:55.785140376 +0100 -@@ -655,7 +655,7 @@ - goto fail_nomem; - charge = len; - } -- tmp = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); -+ tmp = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); - if (!tmp) - goto fail_nomem; - *tmp = *mpnt; -@@ -714,7 +714,7 @@ - __vma_link_rb(mm, tmp, rb_link, rb_parent); - rb_link = &tmp->vm_rb.rb_right; - rb_parent = &tmp->vm_rb; -- -+ uksm_vma_add_new(tmp); - mm->map_count++; - if (!(tmp->vm_flags & VM_WIPEONFORK)) - retval = copy_page_range(mm, oldmm, mpnt); -diff -Nur a/lib/Makefile b/lib/Makefile ---- a/lib/Makefile 2018-05-25 15:18:02.000000000 +0100 -+++ b/lib/Makefile 2018-05-26 19:30:55.786140408 +0100 -@@ -18,7 +18,7 @@ - KCOV_INSTRUMENT_dynamic_debug.o := n - - lib-y := ctype.o string.o vsprintf.o cmdline.o \ -- rbtree.o radix-tree.o dump_stack.o timerqueue.o\ -+ rbtree.o radix-tree.o sradix-tree.o dump_stack.o timerqueue.o\ - idr.o int_sqrt.o extable.o \ - sha1.o chacha20.o irq_regs.o argv_split.o \ - flex_proportions.o ratelimit.o show_mem.o \ -diff -Nur a/lib/sradix-tree.c b/lib/sradix-tree.c ---- a/lib/sradix-tree.c 1970-01-01 01:00:00.000000000 +0100 -+++ b/lib/sradix-tree.c 2018-05-26 19:30:55.786140408 +0100 -@@ -0,0 +1,476 @@ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static inline int sradix_node_full(struct sradix_tree_root *root, struct sradix_tree_node *node) -+{ -+ return node->fulls == root->stores_size || -+ (node->height == 1 && node->count == root->stores_size); -+} -+ -+/* -+ * Extend a sradix tree so it can store key @index. -+ */ -+static int sradix_tree_extend(struct sradix_tree_root *root, unsigned long index) -+{ -+ struct sradix_tree_node *node; -+ unsigned int height; -+ -+ if (unlikely(root->rnode == NULL)) { -+ if (!(node = root->alloc())) -+ return -ENOMEM; -+ -+ node->height = 1; -+ root->rnode = node; -+ root->height = 1; -+ } -+ -+ /* Figure out what the height should be. */ -+ height = root->height; -+ index >>= root->shift * height; -+ -+ while (index) { -+ index >>= root->shift; -+ height++; -+ } -+ -+ while (height > root->height) { -+ unsigned int newheight; -+ -+ if (!(node = root->alloc())) -+ return -ENOMEM; -+ -+ /* Increase the height. */ -+ node->stores[0] = root->rnode; -+ root->rnode->parent = node; -+ if (root->extend) -+ root->extend(node, root->rnode); -+ -+ newheight = root->height + 1; -+ node->height = newheight; -+ node->count = 1; -+ if (sradix_node_full(root, root->rnode)) -+ node->fulls = 1; -+ -+ root->rnode = node; -+ root->height = newheight; -+ } -+ -+ return 0; -+} -+ -+/* -+ * Search the next item from the current node, that is not NULL -+ * and can satify root->iter(). -+ */ -+void *sradix_tree_next(struct sradix_tree_root *root, -+ struct sradix_tree_node *node, unsigned long index, -+ int (*iter)(void *item, unsigned long height)) -+{ -+ unsigned long offset; -+ void *item; -+ -+ if (unlikely(node == NULL)) { -+ node = root->rnode; -+ for (offset = 0; offset < root->stores_size; offset++) { -+ item = node->stores[offset]; -+ if (item && (!iter || iter(item, node->height))) -+ break; -+ } -+ -+ if (unlikely(offset >= root->stores_size)) -+ return NULL; -+ -+ if (node->height == 1) -+ return item; -+ else -+ goto go_down; -+ } -+ -+ while (node) { -+ offset = (index & root->mask) + 1; -+ for (; offset < root->stores_size; offset++) { -+ item = node->stores[offset]; -+ if (item && (!iter || iter(item, node->height))) -+ break; -+ } -+ -+ if (offset < root->stores_size) -+ break; -+ -+ node = node->parent; -+ index >>= root->shift; -+ } -+ -+ if (!node) -+ return NULL; -+ -+ while (node->height > 1) { -+go_down: -+ node = item; -+ for (offset = 0; offset < root->stores_size; offset++) { -+ item = node->stores[offset]; -+ if (item && (!iter || iter(item, node->height))) -+ break; -+ } -+ -+ if (unlikely(offset >= root->stores_size)) -+ return NULL; -+ } -+ -+ BUG_ON(offset > root->stores_size); -+ -+ return item; -+} -+ -+/* -+ * Blindly insert the item to the tree. Typically, we reuse the -+ * first empty store item. -+ */ -+int sradix_tree_enter(struct sradix_tree_root *root, void **item, int num) -+{ -+ unsigned long index; -+ unsigned int height; -+ struct sradix_tree_node *node, *tmp = NULL; -+ int offset, offset_saved; -+ void **store = NULL; -+ int error, i, j, shift; -+ -+go_on: -+ index = root->min; -+ -+ if (root->enter_node && !sradix_node_full(root, root->enter_node)) { -+ node = root->enter_node; -+ BUG_ON((index >> (root->shift * root->height))); -+ } else { -+ node = root->rnode; -+ if (node == NULL || (index >> (root->shift * root->height)) -+ || sradix_node_full(root, node)) { -+ error = sradix_tree_extend(root, index); -+ if (error) -+ return error; -+ -+ node = root->rnode; -+ } -+ } -+ -+ -+ height = node->height; -+ shift = (height - 1) * root->shift; -+ offset = (index >> shift) & root->mask; -+ while (shift > 0) { -+ offset_saved = offset; -+ for (; offset < root->stores_size; offset++) { -+ store = &node->stores[offset]; -+ tmp = *store; -+ -+ if (!tmp || !sradix_node_full(root, tmp)) -+ break; -+ } -+ BUG_ON(offset >= root->stores_size); -+ -+ if (offset != offset_saved) { -+ index += (offset - offset_saved) << shift; -+ index &= ~((1UL << shift) - 1); -+ } -+ -+ if (!tmp) { -+ if (!(tmp = root->alloc())) -+ return -ENOMEM; -+ -+ tmp->height = shift / root->shift; -+ *store = tmp; -+ tmp->parent = node; -+ node->count++; -+// if (root->extend) -+// root->extend(node, tmp); -+ } -+ -+ node = tmp; -+ shift -= root->shift; -+ offset = (index >> shift) & root->mask; -+ } -+ -+ BUG_ON(node->height != 1); -+ -+ -+ store = &node->stores[offset]; -+ for (i = 0, j = 0; -+ j < root->stores_size - node->count && -+ i < root->stores_size - offset && j < num; i++) { -+ if (!store[i]) { -+ store[i] = item[j]; -+ if (root->assign) -+ root->assign(node, index + i, item[j]); -+ j++; -+ } -+ } -+ -+ node->count += j; -+ root->num += j; -+ num -= j; -+ -+ while (sradix_node_full(root, node)) { -+ node = node->parent; -+ if (!node) -+ break; -+ -+ node->fulls++; -+ } -+ -+ if (unlikely(!node)) { -+ /* All nodes are full */ -+ root->min = 1 << (root->height * root->shift); -+ root->enter_node = NULL; -+ } else { -+ root->min = index + i - 1; -+ root->min |= (1UL << (node->height - 1)) - 1; -+ root->min++; -+ root->enter_node = node; -+ } -+ -+ if (num) { -+ item += j; -+ goto go_on; -+ } -+ -+ return 0; -+} -+ -+ -+/** -+ * sradix_tree_shrink - shrink height of a sradix tree to minimal -+ * @root sradix tree root -+ * -+ */ -+static inline void sradix_tree_shrink(struct sradix_tree_root *root) -+{ -+ /* try to shrink tree height */ -+ while (root->height > 1) { -+ struct sradix_tree_node *to_free = root->rnode; -+ -+ /* -+ * The candidate node has more than one child, or its child -+ * is not at the leftmost store, we cannot shrink. -+ */ -+ if (to_free->count != 1 || !to_free->stores[0]) -+ break; -+ -+ root->rnode = to_free->stores[0]; -+ root->rnode->parent = NULL; -+ root->height--; -+ if (unlikely(root->enter_node == to_free)) -+ root->enter_node = NULL; -+ root->free(to_free); -+ } -+} -+ -+/* -+ * Del the item on the known leaf node and index -+ */ -+void sradix_tree_delete_from_leaf(struct sradix_tree_root *root, -+ struct sradix_tree_node *node, unsigned long index) -+{ -+ unsigned int offset; -+ struct sradix_tree_node *start, *end; -+ -+ BUG_ON(node->height != 1); -+ -+ start = node; -+ while (node && !(--node->count)) -+ node = node->parent; -+ -+ end = node; -+ if (!node) { -+ root->rnode = NULL; -+ root->height = 0; -+ root->min = 0; -+ root->num = 0; -+ root->enter_node = NULL; -+ } else { -+ offset = (index >> (root->shift * (node->height - 1))) & root->mask; -+ if (root->rm) -+ root->rm(node, offset); -+ node->stores[offset] = NULL; -+ root->num--; -+ if (root->min > index) { -+ root->min = index; -+ root->enter_node = node; -+ } -+ } -+ -+ if (start != end) { -+ do { -+ node = start; -+ start = start->parent; -+ if (unlikely(root->enter_node == node)) -+ root->enter_node = end; -+ root->free(node); -+ } while (start != end); -+ -+ /* -+ * Note that shrink may free "end", so enter_node still need to -+ * be checked inside. -+ */ -+ sradix_tree_shrink(root); -+ } else if (node->count == root->stores_size - 1) { -+ /* It WAS a full leaf node. Update the ancestors */ -+ node = node->parent; -+ while (node) { -+ node->fulls--; -+ if (node->fulls != root->stores_size - 1) -+ break; -+ -+ node = node->parent; -+ } -+ } -+} -+ -+void *sradix_tree_lookup(struct sradix_tree_root *root, unsigned long index) -+{ -+ unsigned int height, offset; -+ struct sradix_tree_node *node; -+ int shift; -+ -+ node = root->rnode; -+ if (node == NULL || (index >> (root->shift * root->height))) -+ return NULL; -+ -+ height = root->height; -+ shift = (height - 1) * root->shift; -+ -+ do { -+ offset = (index >> shift) & root->mask; -+ node = node->stores[offset]; -+ if (!node) -+ return NULL; -+ -+ shift -= root->shift; -+ } while (shift >= 0); -+ -+ return node; -+} -+ -+/* -+ * Return the item if it exists, otherwise create it in place -+ * and return the created item. -+ */ -+void *sradix_tree_lookup_create(struct sradix_tree_root *root, -+ unsigned long index, void *(*item_alloc)(void)) -+{ -+ unsigned int height, offset; -+ struct sradix_tree_node *node, *tmp; -+ void *item; -+ int shift, error; -+ -+ if (root->rnode == NULL || (index >> (root->shift * root->height))) { -+ if (item_alloc) { -+ error = sradix_tree_extend(root, index); -+ if (error) -+ return NULL; -+ } else { -+ return NULL; -+ } -+ } -+ -+ node = root->rnode; -+ height = root->height; -+ shift = (height - 1) * root->shift; -+ -+ do { -+ offset = (index >> shift) & root->mask; -+ if (!node->stores[offset]) { -+ if (!(tmp = root->alloc())) -+ return NULL; -+ -+ tmp->height = shift / root->shift; -+ node->stores[offset] = tmp; -+ tmp->parent = node; -+ node->count++; -+ node = tmp; -+ } else { -+ node = node->stores[offset]; -+ } -+ -+ shift -= root->shift; -+ } while (shift > 0); -+ -+ BUG_ON(node->height != 1); -+ offset = index & root->mask; -+ if (node->stores[offset]) { -+ return node->stores[offset]; -+ } else if (item_alloc) { -+ if (!(item = item_alloc())) -+ return NULL; -+ -+ node->stores[offset] = item; -+ -+ /* -+ * NOTE: we do NOT call root->assign here, since this item is -+ * newly created by us having no meaning. Caller can call this -+ * if it's necessary to do so. -+ */ -+ -+ node->count++; -+ root->num++; -+ -+ while (sradix_node_full(root, node)) { -+ node = node->parent; -+ if (!node) -+ break; -+ -+ node->fulls++; -+ } -+ -+ if (unlikely(!node)) { -+ /* All nodes are full */ -+ root->min = 1 << (root->height * root->shift); -+ } else { -+ if (root->min == index) { -+ root->min |= (1UL << (node->height - 1)) - 1; -+ root->min++; -+ root->enter_node = node; -+ } -+ } -+ -+ return item; -+ } else { -+ return NULL; -+ } -+ -+} -+ -+int sradix_tree_delete(struct sradix_tree_root *root, unsigned long index) -+{ -+ unsigned int height, offset; -+ struct sradix_tree_node *node; -+ int shift; -+ -+ node = root->rnode; -+ if (node == NULL || (index >> (root->shift * root->height))) -+ return -ENOENT; -+ -+ height = root->height; -+ shift = (height - 1) * root->shift; -+ -+ do { -+ offset = (index >> shift) & root->mask; -+ node = node->stores[offset]; -+ if (!node) -+ return -ENOENT; -+ -+ shift -= root->shift; -+ } while (shift > 0); -+ -+ offset = index & root->mask; -+ if (!node->stores[offset]) -+ return -ENOENT; -+ -+ sradix_tree_delete_from_leaf(root, node, index); -+ -+ return 0; -+} -diff -Nur a/mm/Kconfig b/mm/Kconfig ---- a/mm/Kconfig 2018-05-26 19:24:34.846783391 +0100 -+++ b/mm/Kconfig 2018-05-26 19:30:55.786140408 +0100 -@@ -315,6 +315,32 @@ - See Documentation/vm/ksm.txt for more information: KSM is inactive - until a program has madvised that an area is MADV_MERGEABLE, and - root has set /sys/kernel/mm/ksm/run to 1 (if CONFIG_SYSFS is set). -+choice -+ prompt "Choose UKSM/KSM strategy" -+ default UKSM -+ depends on KSM -+ help -+ This option allows to select a UKSM/KSM stragety. -+ -+config UKSM -+ bool "Ultra-KSM for page merging" -+ depends on KSM -+ help -+ UKSM is inspired by the Linux kernel project \u2014 KSM(Kernel Same -+ page Merging), but with a fundamentally rewritten core algorithm. With -+ an advanced algorithm, UKSM now can transparently scans all anonymously -+ mapped user space applications with an significantly improved scan speed -+ and CPU efficiency. Since KVM is friendly to KSM, KVM can also benefit from -+ UKSM. Now UKSM has its first stable release and first real world enterprise user. -+ For more information, please goto its project page. -+ (www.kerneldedup.org) -+ -+config KSM_LEGACY -+ bool "Legacy KSM implementation" -+ depends on KSM -+ help -+ The legacy KSM implementation from Red Hat. -+endchoice - - config DEFAULT_MMAP_MIN_ADDR - int "Low address space to protect from user allocation" -diff -Nur a/mm/Makefile b/mm/Makefile ---- a/mm/Makefile 2018-05-25 15:18:02.000000000 +0100 -+++ b/mm/Makefile 2018-05-26 19:30:55.786140408 +0100 -@@ -65,7 +65,8 @@ - obj-$(CONFIG_SPARSEMEM_VMEMMAP) += sparse-vmemmap.o - obj-$(CONFIG_SLOB) += slob.o - obj-$(CONFIG_MMU_NOTIFIER) += mmu_notifier.o --obj-$(CONFIG_KSM) += ksm.o -+obj-$(CONFIG_KSM_LEGACY) += ksm.o -+obj-$(CONFIG_UKSM) += uksm.o - obj-$(CONFIG_PAGE_POISONING) += page_poison.o - obj-$(CONFIG_SLAB) += slab.o - obj-$(CONFIG_SLUB) += slub.o -diff -Nur a/mm/memory.c b/mm/memory.c ---- a/mm/memory.c 2018-05-25 15:18:02.000000000 +0100 -+++ b/mm/memory.c 2018-05-26 19:30:55.787140441 +0100 -@@ -129,6 +129,25 @@ - - unsigned long highest_memmap_pfn __read_mostly; - -+#ifdef CONFIG_UKSM -+unsigned long uksm_zero_pfn __read_mostly; -+EXPORT_SYMBOL_GPL(uksm_zero_pfn); -+struct page *empty_uksm_zero_page; -+ -+static int __init setup_uksm_zero_page(void) -+{ -+ empty_uksm_zero_page = alloc_pages(__GFP_ZERO & ~__GFP_MOVABLE, 0); -+ if (!empty_uksm_zero_page) -+ panic("Oh boy, that early out of memory?"); -+ -+ SetPageReserved(empty_uksm_zero_page); -+ uksm_zero_pfn = page_to_pfn(empty_uksm_zero_page); -+ -+ return 0; -+} -+core_initcall(setup_uksm_zero_page); -+#endif -+ - /* - * CONFIG_MMU architectures set up ZERO_PAGE in their paging_init() - */ -@@ -140,6 +159,7 @@ - core_initcall(init_zero_pfn); - - -+ - #if defined(SPLIT_RSS_COUNTING) - - void sync_mm_rss(struct mm_struct *mm) -@@ -1035,6 +1055,9 @@ - get_page(page); - page_dup_rmap(page, false); - rss[mm_counter(page)]++; -+ -+ /* Should return NULL in vm_normal_page() */ -+ uksm_bugon_zeropage(pte); - } else if (pte_devmap(pte)) { - page = pte_page(pte); - -@@ -1048,6 +1071,8 @@ - page_dup_rmap(page, false); - rss[mm_counter(page)]++; - } -+ } else { -+ uksm_map_zero_page(pte); - } - - out_set_pte: -@@ -1317,8 +1342,10 @@ - ptent = ptep_get_and_clear_full(mm, addr, pte, - tlb->fullmm); - tlb_remove_tlb_entry(tlb, pte, addr); -- if (unlikely(!page)) -+ if (unlikely(!page)) { -+ uksm_unmap_zero_page(ptent); - continue; -+ } - - if (!PageAnon(page)) { - if (pte_dirty(ptent)) { -@@ -2318,8 +2345,10 @@ - clear_page(kaddr); - kunmap_atomic(kaddr); - flush_dcache_page(dst); -- } else -+ } else { - copy_user_highpage(dst, src, va, vma); -+ uksm_cow_page(vma, src); -+ } - } - - static gfp_t __get_fault_gfp_mask(struct vm_area_struct *vma) -@@ -2468,6 +2497,7 @@ - vmf->address); - if (!new_page) - goto oom; -+ uksm_cow_pte(vma, vmf->orig_pte); - } else { - new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, - vmf->address); -@@ -2494,7 +2524,9 @@ - mm_counter_file(old_page)); - inc_mm_counter_fast(mm, MM_ANONPAGES); - } -+ uksm_bugon_zeropage(vmf->orig_pte); - } else { -+ uksm_unmap_zero_page(vmf->orig_pte); - inc_mm_counter_fast(mm, MM_ANONPAGES); - } - flush_cache_page(vma, vmf->address, pte_pfn(vmf->orig_pte)); -diff -Nur a/mm/mmap.c b/mm/mmap.c ---- a/mm/mmap.c 2018-05-26 19:24:34.847783423 +0100 -+++ b/mm/mmap.c 2018-05-26 19:30:55.788140473 +0100 -@@ -45,6 +45,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -173,6 +174,7 @@ - if (vma->vm_file) - fput(vma->vm_file); - mpol_put(vma_policy(vma)); -+ uksm_remove_vma(vma); - kmem_cache_free(vm_area_cachep, vma); - return next; - } -@@ -699,9 +701,16 @@ - long adjust_next = 0; - int remove_next = 0; - -+/* -+ * to avoid deadlock, ksm_remove_vma must be done before any spin_lock is -+ * acquired -+ */ -+ uksm_remove_vma(vma); -+ - if (next && !insert) { - struct vm_area_struct *exporter = NULL, *importer = NULL; - -+ uksm_remove_vma(next); - if (end >= next->vm_end) { - /* - * vma expands, overlapping all the next, and -@@ -834,6 +843,7 @@ - end_changed = true; - } - vma->vm_pgoff = pgoff; -+ - if (adjust_next) { - next->vm_start += adjust_next << PAGE_SHIFT; - next->vm_pgoff += adjust_next; -@@ -939,6 +949,7 @@ - if (remove_next == 2) { - remove_next = 1; - end = next->vm_end; -+ uksm_remove_vma(next); - goto again; - } - else if (next) -@@ -965,10 +976,14 @@ - */ - VM_WARN_ON(mm->highest_vm_end != vm_end_gap(vma)); - } -+ } else { -+ if (next && !insert) -+ uksm_vma_add_new(next); - } - if (insert && file) - uprobe_mmap(insert); - -+ uksm_vma_add_new(vma); - validate_mm(mm); - - return 0; -@@ -1385,6 +1400,9 @@ - vm_flags |= calc_vm_prot_bits(prot, pkey) | calc_vm_flag_bits(flags) | - mm->def_flags | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC; - -+ /* If uksm is enabled, we add VM_MERGEABLE to new VMAs. */ -+ uksm_vm_flags_mod(&vm_flags); -+ - if (flags & MAP_LOCKED) - if (!can_do_mlock()) - return -EPERM; -@@ -1724,6 +1742,7 @@ - allow_write_access(file); - } - file = vma->vm_file; -+ uksm_vma_add_new(vma); - out: - perf_event_mmap(vma); - -@@ -1765,6 +1784,7 @@ - if (vm_flags & VM_DENYWRITE) - allow_write_access(file); - free_vma: -+ uksm_remove_vma(vma); - kmem_cache_free(vm_area_cachep, vma); - unacct_error: - if (charged) -@@ -2589,6 +2609,8 @@ - else - err = vma_adjust(vma, vma->vm_start, addr, vma->vm_pgoff, new); - -+ uksm_vma_add_new(new); -+ - /* Success. */ - if (!err) - return 0; -@@ -2881,6 +2903,7 @@ - if ((flags & (~VM_EXEC)) != 0) - return -EINVAL; - flags |= VM_DATA_DEFAULT_FLAGS | VM_ACCOUNT | mm->def_flags; -+ uksm_vm_flags_mod(&flags); - - error = get_unmapped_area(NULL, addr, len, 0, MAP_FIXED); - if (offset_in_page(error)) -@@ -2938,6 +2961,7 @@ - vma->vm_flags = flags; - vma->vm_page_prot = vm_get_page_prot(flags); - vma_link(mm, vma, prev, rb_link, rb_parent); -+ uksm_vma_add_new(vma); - out: - perf_event_mmap(vma); - mm->total_vm += len >> PAGE_SHIFT; -@@ -3015,6 +3039,12 @@ - up_write(&mm->mmap_sem); - } - -+ /* -+ * Taking write lock on mmap_sem does not harm others, -+ * but it's crucial for uksm to avoid races. -+ */ -+ down_write(&mm->mmap_sem); -+ - if (mm->locked_vm) { - vma = mm->mmap; - while (vma) { -@@ -3049,6 +3079,11 @@ - vma = remove_vma(vma); - } - vm_unacct_memory(nr_accounted); -+ -+ mm->mmap = NULL; -+ mm->mm_rb = RB_ROOT; -+ vmacache_invalidate(mm); -+ up_write(&mm->mmap_sem); - } - - /* Insert vm structure into process list sorted by address -@@ -3158,6 +3193,7 @@ - new_vma->vm_ops->open(new_vma); - vma_link(mm, new_vma, prev, rb_link, rb_parent); - *need_rmap_locks = false; -+ uksm_vma_add_new(new_vma); - } - return new_vma; - -@@ -3308,6 +3344,7 @@ - vm_stat_account(mm, vma->vm_flags, len >> PAGE_SHIFT); - - perf_event_mmap(vma); -+ uksm_vma_add_new(vma); - - return vma; - -diff -Nur a/mm/rmap.c b/mm/rmap.c ---- a/mm/rmap.c 2018-05-25 15:18:02.000000000 +0100 -+++ b/mm/rmap.c 2018-05-26 19:30:55.788140473 +0100 -@@ -1013,9 +1013,9 @@ - - /** - * __page_set_anon_rmap - set up new anonymous rmap -- * @page: Page to add to rmap -+ * @page: Page to add to rmap - * @vma: VM area to add page to. -- * @address: User virtual address of the mapping -+ * @address: User virtual address of the mapping - * @exclusive: the page is exclusively owned by the current process - */ - static void __page_set_anon_rmap(struct page *page, -diff -Nur a/mm/uksm.c b/mm/uksm.c ---- a/mm/uksm.c 1970-01-01 01:00:00.000000000 +0100 -+++ b/mm/uksm.c 2018-05-26 19:30:55.791140570 +0100 -@@ -0,0 +1,5584 @@ -+/* -+ * Ultra KSM. Copyright (C) 2011-2012 Nai Xia -+ * -+ * This is an improvement upon KSM. Some basic data structures and routines -+ * are borrowed from ksm.c . -+ * -+ * Its new features: -+ * 1. Full system scan: -+ * It automatically scans all user processes' anonymous VMAs. Kernel-user -+ * interaction to submit a memory area to KSM is no longer needed. -+ * -+ * 2. Rich area detection: -+ * It automatically detects rich areas containing abundant duplicated -+ * pages based. Rich areas are given a full scan speed. Poor areas are -+ * sampled at a reasonable speed with very low CPU consumption. -+ * -+ * 3. Ultra Per-page scan speed improvement: -+ * A new hash algorithm is proposed. As a result, on a machine with -+ * Core(TM)2 Quad Q9300 CPU in 32-bit mode and 800MHZ DDR2 main memory, it -+ * can scan memory areas that does not contain duplicated pages at speed of -+ * 627MB/sec ~ 2445MB/sec and can merge duplicated areas at speed of -+ * 477MB/sec ~ 923MB/sec. -+ * -+ * 4. Thrashing area avoidance: -+ * Thrashing area(an VMA that has frequent Ksm page break-out) can be -+ * filtered out. My benchmark shows it's more efficient than KSM's per-page -+ * hash value based volatile page detection. -+ * -+ * -+ * 5. Misc changes upon KSM: -+ * * It has a fully x86-opitmized memcmp dedicated for 4-byte-aligned page -+ * comparison. It's much faster than default C version on x86. -+ * * rmap_item now has an struct *page member to loosely cache a -+ * address-->page mapping, which reduces too much time-costly -+ * follow_page(). -+ * * The VMA creation/exit procedures are hooked to let the Ultra KSM know. -+ * * try_to_merge_two_pages() now can revert a pte if it fails. No break_ -+ * ksm is needed for this case. -+ * -+ * 6. Full Zero Page consideration(contributed by Figo Zhang) -+ * Now uksmd consider full zero pages as special pages and merge them to an -+ * special unswappable uksm zero page. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include "internal.h" -+ -+#ifdef CONFIG_X86 -+#undef memcmp -+ -+#ifdef CONFIG_X86_32 -+#define memcmp memcmpx86_32 -+/* -+ * Compare 4-byte-aligned address s1 and s2, with length n -+ */ -+int memcmpx86_32(void *s1, void *s2, size_t n) -+{ -+ size_t num = n / 4; -+ register int res; -+ -+ __asm__ __volatile__ -+ ( -+ "testl %3,%3\n\t" -+ "repe; cmpsd\n\t" -+ "je 1f\n\t" -+ "sbbl %0,%0\n\t" -+ "orl $1,%0\n" -+ "1:" -+ : "=&a" (res), "+&S" (s1), "+&D" (s2), "+&c" (num) -+ : "0" (0) -+ : "cc"); -+ -+ return res; -+} -+ -+/* -+ * Check the page is all zero ? -+ */ -+static int is_full_zero(const void *s1, size_t len) -+{ -+ unsigned char same; -+ -+ len /= 4; -+ -+ __asm__ __volatile__ -+ ("repe; scasl;" -+ "sete %0" -+ : "=qm" (same), "+D" (s1), "+c" (len) -+ : "a" (0) -+ : "cc"); -+ -+ return same; -+} -+ -+ -+#elif defined(CONFIG_X86_64) -+#define memcmp memcmpx86_64 -+/* -+ * Compare 8-byte-aligned address s1 and s2, with length n -+ */ -+int memcmpx86_64(void *s1, void *s2, size_t n) -+{ -+ size_t num = n / 8; -+ register int res; -+ -+ __asm__ __volatile__ -+ ( -+ "testq %q3,%q3\n\t" -+ "repe; cmpsq\n\t" -+ "je 1f\n\t" -+ "sbbq %q0,%q0\n\t" -+ "orq $1,%q0\n" -+ "1:" -+ : "=&a" (res), "+&S" (s1), "+&D" (s2), "+&c" (num) -+ : "0" (0) -+ : "cc"); -+ -+ return res; -+} -+ -+static int is_full_zero(const void *s1, size_t len) -+{ -+ unsigned char same; -+ -+ len /= 8; -+ -+ __asm__ __volatile__ -+ ("repe; scasq;" -+ "sete %0" -+ : "=qm" (same), "+D" (s1), "+c" (len) -+ : "a" (0) -+ : "cc"); -+ -+ return same; -+} -+ -+#endif -+#else -+static int is_full_zero(const void *s1, size_t len) -+{ -+ unsigned long *src = s1; -+ int i; -+ -+ len /= sizeof(*src); -+ -+ for (i = 0; i < len; i++) { -+ if (src[i]) -+ return 0; -+ } -+ -+ return 1; -+} -+#endif -+ -+#define UKSM_RUNG_ROUND_FINISHED (1 << 0) -+#define TIME_RATIO_SCALE 10000 -+ -+#define SLOT_TREE_NODE_SHIFT 8 -+#define SLOT_TREE_NODE_STORE_SIZE (1UL << SLOT_TREE_NODE_SHIFT) -+struct slot_tree_node { -+ unsigned long size; -+ struct sradix_tree_node snode; -+ void *stores[SLOT_TREE_NODE_STORE_SIZE]; -+}; -+ -+static struct kmem_cache *slot_tree_node_cachep; -+ -+static struct sradix_tree_node *slot_tree_node_alloc(void) -+{ -+ struct slot_tree_node *p; -+ -+ p = kmem_cache_zalloc(slot_tree_node_cachep, GFP_KERNEL | -+ __GFP_NORETRY | __GFP_NOWARN); -+ if (!p) -+ return NULL; -+ -+ return &p->snode; -+} -+ -+static void slot_tree_node_free(struct sradix_tree_node *node) -+{ -+ struct slot_tree_node *p; -+ -+ p = container_of(node, struct slot_tree_node, snode); -+ kmem_cache_free(slot_tree_node_cachep, p); -+} -+ -+static void slot_tree_node_extend(struct sradix_tree_node *parent, -+ struct sradix_tree_node *child) -+{ -+ struct slot_tree_node *p, *c; -+ -+ p = container_of(parent, struct slot_tree_node, snode); -+ c = container_of(child, struct slot_tree_node, snode); -+ -+ p->size += c->size; -+} -+ -+void slot_tree_node_assign(struct sradix_tree_node *node, -+ unsigned int index, void *item) -+{ -+ struct vma_slot *slot = item; -+ struct slot_tree_node *cur; -+ -+ slot->snode = node; -+ slot->sindex = index; -+ -+ while (node) { -+ cur = container_of(node, struct slot_tree_node, snode); -+ cur->size += slot->pages; -+ node = node->parent; -+ } -+} -+ -+void slot_tree_node_rm(struct sradix_tree_node *node, unsigned int offset) -+{ -+ struct vma_slot *slot; -+ struct slot_tree_node *cur; -+ unsigned long pages; -+ -+ if (node->height == 1) { -+ slot = node->stores[offset]; -+ pages = slot->pages; -+ } else { -+ cur = container_of(node->stores[offset], -+ struct slot_tree_node, snode); -+ pages = cur->size; -+ } -+ -+ while (node) { -+ cur = container_of(node, struct slot_tree_node, snode); -+ cur->size -= pages; -+ node = node->parent; -+ } -+} -+ -+unsigned long slot_iter_index; -+int slot_iter(void *item, unsigned long height) -+{ -+ struct slot_tree_node *node; -+ struct vma_slot *slot; -+ -+ if (height == 1) { -+ slot = item; -+ if (slot_iter_index < slot->pages) { -+ /*in this one*/ -+ return 1; -+ } else { -+ slot_iter_index -= slot->pages; -+ return 0; -+ } -+ -+ } else { -+ node = container_of(item, struct slot_tree_node, snode); -+ if (slot_iter_index < node->size) { -+ /*in this one*/ -+ return 1; -+ } else { -+ slot_iter_index -= node->size; -+ return 0; -+ } -+ } -+} -+ -+ -+static inline void slot_tree_init_root(struct sradix_tree_root *root) -+{ -+ init_sradix_tree_root(root, SLOT_TREE_NODE_SHIFT); -+ root->alloc = slot_tree_node_alloc; -+ root->free = slot_tree_node_free; -+ root->extend = slot_tree_node_extend; -+ root->assign = slot_tree_node_assign; -+ root->rm = slot_tree_node_rm; -+} -+ -+void slot_tree_init(void) -+{ -+ slot_tree_node_cachep = kmem_cache_create("slot_tree_node", -+ sizeof(struct slot_tree_node), 0, -+ SLAB_PANIC | SLAB_RECLAIM_ACCOUNT, -+ NULL); -+} -+ -+ -+/* Each rung of this ladder is a list of VMAs having a same scan ratio */ -+struct scan_rung { -+ //struct list_head scanned_list; -+ struct sradix_tree_root vma_root; -+ struct sradix_tree_root vma_root2; -+ -+ struct vma_slot *current_scan; -+ unsigned long current_offset; -+ -+ /* -+ * The initial value for current_offset, it should loop over -+ * [0~ step - 1] to let all slot have its chance to be scanned. -+ */ -+ unsigned long offset_init; -+ unsigned long step; /* dynamic step for current_offset */ -+ unsigned int flags; -+ unsigned long pages_to_scan; -+ //unsigned long fully_scanned_slots; -+ /* -+ * a little bit tricky - if cpu_time_ratio > 0, then the value is the -+ * the cpu time ratio it can spend in rung_i for every scan -+ * period. if < 0, then it is the cpu time ratio relative to the -+ * max cpu percentage user specified. Both in unit of -+ * 1/TIME_RATIO_SCALE -+ */ -+ int cpu_ratio; -+ -+ /* -+ * How long it will take for all slots in this rung to be fully -+ * scanned? If it's zero, we don't care about the cover time: -+ * it's fully scanned. -+ */ -+ unsigned int cover_msecs; -+ //unsigned long vma_num; -+ //unsigned long pages; /* Sum of all slot's pages in rung */ -+}; -+ -+/** -+ * node of either the stable or unstale rbtree -+ * -+ */ -+struct tree_node { -+ struct rb_node node; /* link in the main (un)stable rbtree */ -+ struct rb_root sub_root; /* rb_root for sublevel collision rbtree */ -+ u32 hash; -+ unsigned long count; /* TODO: merged with sub_root */ -+ struct list_head all_list; /* all tree nodes in stable/unstable tree */ -+}; -+ -+/** -+ * struct stable_node - node of the stable rbtree -+ * @node: rb node of this ksm page in the stable tree -+ * @hlist: hlist head of rmap_items using this ksm page -+ * @kpfn: page frame number of this ksm page -+ */ -+struct stable_node { -+ struct rb_node node; /* link in sub-rbtree */ -+ struct tree_node *tree_node; /* it's tree node root in stable tree, NULL if it's in hell list */ -+ struct hlist_head hlist; -+ unsigned long kpfn; -+ u32 hash_max; /* if ==0 then it's not been calculated yet */ -+ struct list_head all_list; /* in a list for all stable nodes */ -+}; -+ -+/** -+ * struct node_vma - group rmap_items linked in a same stable -+ * node together. -+ */ -+struct node_vma { -+ union { -+ struct vma_slot *slot; -+ unsigned long key; /* slot is used as key sorted on hlist */ -+ }; -+ struct hlist_node hlist; -+ struct hlist_head rmap_hlist; -+ struct stable_node *head; -+}; -+ -+/** -+ * struct rmap_item - reverse mapping item for virtual addresses -+ * @rmap_list: next rmap_item in mm_slot's singly-linked rmap_list -+ * @anon_vma: pointer to anon_vma for this mm,address, when in stable tree -+ * @mm: the memory structure this rmap_item is pointing into -+ * @address: the virtual address this rmap_item tracks (+ flags in low bits) -+ * @node: rb node of this rmap_item in the unstable tree -+ * @head: pointer to stable_node heading this list in the stable tree -+ * @hlist: link into hlist of rmap_items hanging off that stable_node -+ */ -+struct rmap_item { -+ struct vma_slot *slot; -+ struct page *page; -+ unsigned long address; /* + low bits used for flags below */ -+ unsigned long hash_round; -+ unsigned long entry_index; -+ union { -+ struct {/* when in unstable tree */ -+ struct rb_node node; -+ struct tree_node *tree_node; -+ u32 hash_max; -+ }; -+ struct { /* when in stable tree */ -+ struct node_vma *head; -+ struct hlist_node hlist; -+ struct anon_vma *anon_vma; -+ }; -+ }; -+} __aligned(4); -+ -+struct rmap_list_entry { -+ union { -+ struct rmap_item *item; -+ unsigned long addr; -+ }; -+ /* lowest bit is used for is_addr tag */ -+} __aligned(4); /* 4 aligned to fit in to pages*/ -+ -+ -+/* Basic data structure definition ends */ -+ -+ -+/* -+ * Flags for rmap_item to judge if it's listed in the stable/unstable tree. -+ * The flags use the low bits of rmap_item.address -+ */ -+#define UNSTABLE_FLAG 0x1 -+#define STABLE_FLAG 0x2 -+#define get_rmap_addr(x) ((x)->address & PAGE_MASK) -+ -+/* -+ * rmap_list_entry helpers -+ */ -+#define IS_ADDR_FLAG 1 -+#define is_addr(ptr) ((unsigned long)(ptr) & IS_ADDR_FLAG) -+#define set_is_addr(ptr) ((ptr) |= IS_ADDR_FLAG) -+#define get_clean_addr(ptr) (((ptr) & ~(__typeof__(ptr))IS_ADDR_FLAG)) -+ -+ -+/* -+ * High speed caches for frequently allocated and freed structs -+ */ -+static struct kmem_cache *rmap_item_cache; -+static struct kmem_cache *stable_node_cache; -+static struct kmem_cache *node_vma_cache; -+static struct kmem_cache *vma_slot_cache; -+static struct kmem_cache *tree_node_cache; -+#define UKSM_KMEM_CACHE(__struct, __flags) kmem_cache_create("uksm_"#__struct,\ -+ sizeof(struct __struct), __alignof__(struct __struct),\ -+ (__flags), NULL) -+ -+/* Array of all scan_rung, uksm_scan_ladder[0] having the minimum scan ratio */ -+#define SCAN_LADDER_SIZE 4 -+static struct scan_rung uksm_scan_ladder[SCAN_LADDER_SIZE]; -+ -+/* The evaluation rounds uksmd has finished */ -+static unsigned long long uksm_eval_round = 1; -+ -+/* -+ * we add 1 to this var when we consider we should rebuild the whole -+ * unstable tree. -+ */ -+static unsigned long uksm_hash_round = 1; -+ -+/* -+ * How many times the whole memory is scanned. -+ */ -+static unsigned long long fully_scanned_round = 1; -+ -+/* The total number of virtual pages of all vma slots */ -+static u64 uksm_pages_total; -+ -+/* The number of pages has been scanned since the start up */ -+static u64 uksm_pages_scanned; -+ -+static u64 scanned_virtual_pages; -+ -+/* The number of pages has been scanned since last encode_benefit call */ -+static u64 uksm_pages_scanned_last; -+ -+/* If the scanned number is tooo large, we encode it here */ -+static u64 pages_scanned_stored; -+ -+static unsigned long pages_scanned_base; -+ -+/* The number of nodes in the stable tree */ -+static unsigned long uksm_pages_shared; -+ -+/* The number of page slots additionally sharing those nodes */ -+static unsigned long uksm_pages_sharing; -+ -+/* The number of nodes in the unstable tree */ -+static unsigned long uksm_pages_unshared; -+ -+/* -+ * Milliseconds ksmd should sleep between scans, -+ * >= 100ms to be consistent with -+ * scan_time_to_sleep_msec() -+ */ -+static unsigned int uksm_sleep_jiffies; -+ -+/* The real value for the uksmd next sleep */ -+static unsigned int uksm_sleep_real; -+ -+/* Saved value for user input uksm_sleep_jiffies when it's enlarged */ -+static unsigned int uksm_sleep_saved; -+ -+/* Max percentage of cpu utilization ksmd can take to scan in one batch */ -+static unsigned int uksm_max_cpu_percentage; -+ -+static int uksm_cpu_governor; -+ -+static char *uksm_cpu_governor_str[4] = { "full", "medium", "low", "quiet" }; -+ -+struct uksm_cpu_preset_s { -+ int cpu_ratio[SCAN_LADDER_SIZE]; -+ unsigned int cover_msecs[SCAN_LADDER_SIZE]; -+ unsigned int max_cpu; /* percentage */ -+}; -+ -+struct uksm_cpu_preset_s uksm_cpu_preset[4] = { -+ { {20, 40, -2500, -10000}, {1000, 500, 200, 50}, 95}, -+ { {20, 30, -2500, -10000}, {1000, 500, 400, 100}, 50}, -+ { {10, 20, -5000, -10000}, {1500, 1000, 1000, 250}, 20}, -+ { {10, 20, 40, 75}, {2000, 1000, 1000, 1000}, 1}, -+}; -+ -+/* The default value for uksm_ema_page_time if it's not initialized */ -+#define UKSM_PAGE_TIME_DEFAULT 500 -+ -+/*cost to scan one page by expotional moving average in nsecs */ -+static unsigned long uksm_ema_page_time = UKSM_PAGE_TIME_DEFAULT; -+ -+/* The expotional moving average alpha weight, in percentage. */ -+#define EMA_ALPHA 20 -+ -+/* -+ * The threshold used to filter out thrashing areas, -+ * If it == 0, filtering is disabled, otherwise it's the percentage up-bound -+ * of the thrashing ratio of all areas. Any area with a bigger thrashing ratio -+ * will be considered as having a zero duplication ratio. -+ */ -+static unsigned int uksm_thrash_threshold = 50; -+ -+/* How much dedup ratio is considered to be abundant*/ -+static unsigned int uksm_abundant_threshold = 10; -+ -+/* All slots having merged pages in this eval round. */ -+struct list_head vma_slot_dedup = LIST_HEAD_INIT(vma_slot_dedup); -+ -+/* How many times the ksmd has slept since startup */ -+static unsigned long long uksm_sleep_times; -+ -+#define UKSM_RUN_STOP 0 -+#define UKSM_RUN_MERGE 1 -+static unsigned int uksm_run = 1; -+ -+static DECLARE_WAIT_QUEUE_HEAD(uksm_thread_wait); -+static DEFINE_MUTEX(uksm_thread_mutex); -+ -+/* -+ * List vma_slot_new is for newly created vma_slot waiting to be added by -+ * ksmd. If one cannot be added(e.g. due to it's too small), it's moved to -+ * vma_slot_noadd. vma_slot_del is the list for vma_slot whose corresponding -+ * VMA has been removed/freed. -+ */ -+struct list_head vma_slot_new = LIST_HEAD_INIT(vma_slot_new); -+struct list_head vma_slot_noadd = LIST_HEAD_INIT(vma_slot_noadd); -+struct list_head vma_slot_del = LIST_HEAD_INIT(vma_slot_del); -+static DEFINE_SPINLOCK(vma_slot_list_lock); -+ -+/* The unstable tree heads */ -+static struct rb_root root_unstable_tree = RB_ROOT; -+ -+/* -+ * All tree_nodes are in a list to be freed at once when unstable tree is -+ * freed after each scan round. -+ */ -+static struct list_head unstable_tree_node_list = -+ LIST_HEAD_INIT(unstable_tree_node_list); -+ -+/* List contains all stable nodes */ -+static struct list_head stable_node_list = LIST_HEAD_INIT(stable_node_list); -+ -+/* -+ * When the hash strength is changed, the stable tree must be delta_hashed and -+ * re-structured. We use two set of below structs to speed up the -+ * re-structuring of stable tree. -+ */ -+static struct list_head -+stable_tree_node_list[2] = {LIST_HEAD_INIT(stable_tree_node_list[0]), -+ LIST_HEAD_INIT(stable_tree_node_list[1])}; -+ -+static struct list_head *stable_tree_node_listp = &stable_tree_node_list[0]; -+static struct rb_root root_stable_tree[2] = {RB_ROOT, RB_ROOT}; -+static struct rb_root *root_stable_treep = &root_stable_tree[0]; -+static unsigned long stable_tree_index; -+ -+/* The hash strength needed to hash a full page */ -+#define HASH_STRENGTH_FULL (PAGE_SIZE / sizeof(u32)) -+ -+/* The hash strength needed for loop-back hashing */ -+#define HASH_STRENGTH_MAX (HASH_STRENGTH_FULL + 10) -+ -+/* The random offsets in a page */ -+static u32 *random_nums; -+ -+/* The hash strength */ -+static unsigned long hash_strength = HASH_STRENGTH_FULL >> 4; -+ -+/* The delta value each time the hash strength increases or decreases */ -+static unsigned long hash_strength_delta; -+#define HASH_STRENGTH_DELTA_MAX 5 -+ -+/* The time we have saved due to random_sample_hash */ -+static u64 rshash_pos; -+ -+/* The time we have wasted due to hash collision */ -+static u64 rshash_neg; -+ -+struct uksm_benefit { -+ u64 pos; -+ u64 neg; -+ u64 scanned; -+ unsigned long base; -+} benefit; -+ -+/* -+ * The relative cost of memcmp, compared to 1 time unit of random sample -+ * hash, this value is tested when ksm module is initialized -+ */ -+static unsigned long memcmp_cost; -+ -+static unsigned long rshash_neg_cont_zero; -+static unsigned long rshash_cont_obscure; -+ -+/* The possible states of hash strength adjustment heuristic */ -+enum rshash_states { -+ RSHASH_STILL, -+ RSHASH_TRYUP, -+ RSHASH_TRYDOWN, -+ RSHASH_NEW, -+ RSHASH_PRE_STILL, -+}; -+ -+/* The possible direction we are about to adjust hash strength */ -+enum rshash_direct { -+ GO_UP, -+ GO_DOWN, -+ OBSCURE, -+ STILL, -+}; -+ -+/* random sampling hash state machine */ -+static struct { -+ enum rshash_states state; -+ enum rshash_direct pre_direct; -+ u8 below_count; -+ /* Keep a lookup window of size 5, iff above_count/below_count > 3 -+ * in this window we stop trying. -+ */ -+ u8 lookup_window_index; -+ u64 stable_benefit; -+ unsigned long turn_point_down; -+ unsigned long turn_benefit_down; -+ unsigned long turn_point_up; -+ unsigned long turn_benefit_up; -+ unsigned long stable_point; -+} rshash_state; -+ -+/*zero page hash table, hash_strength [0 ~ HASH_STRENGTH_MAX]*/ -+static u32 *zero_hash_table; -+ -+static inline struct node_vma *alloc_node_vma(void) -+{ -+ struct node_vma *node_vma; -+ -+ node_vma = kmem_cache_zalloc(node_vma_cache, GFP_KERNEL | -+ __GFP_NORETRY | __GFP_NOWARN); -+ if (node_vma) { -+ INIT_HLIST_HEAD(&node_vma->rmap_hlist); -+ INIT_HLIST_NODE(&node_vma->hlist); -+ } -+ return node_vma; -+} -+ -+static inline void free_node_vma(struct node_vma *node_vma) -+{ -+ kmem_cache_free(node_vma_cache, node_vma); -+} -+ -+ -+static inline struct vma_slot *alloc_vma_slot(void) -+{ -+ struct vma_slot *slot; -+ -+ /* -+ * In case ksm is not initialized by now. -+ * Oops, we need to consider the call site of uksm_init() in the future. -+ */ -+ if (!vma_slot_cache) -+ return NULL; -+ -+ slot = kmem_cache_zalloc(vma_slot_cache, GFP_KERNEL | -+ __GFP_NORETRY | __GFP_NOWARN); -+ if (slot) { -+ INIT_LIST_HEAD(&slot->slot_list); -+ INIT_LIST_HEAD(&slot->dedup_list); -+ slot->flags |= UKSM_SLOT_NEED_RERAND; -+ } -+ return slot; -+} -+ -+static inline void free_vma_slot(struct vma_slot *vma_slot) -+{ -+ kmem_cache_free(vma_slot_cache, vma_slot); -+} -+ -+ -+ -+static inline struct rmap_item *alloc_rmap_item(void) -+{ -+ struct rmap_item *rmap_item; -+ -+ rmap_item = kmem_cache_zalloc(rmap_item_cache, GFP_KERNEL | -+ __GFP_NORETRY | __GFP_NOWARN); -+ if (rmap_item) { -+ /* bug on lowest bit is not clear for flag use */ -+ BUG_ON(is_addr(rmap_item)); -+ } -+ return rmap_item; -+} -+ -+static inline void free_rmap_item(struct rmap_item *rmap_item) -+{ -+ rmap_item->slot = NULL; /* debug safety */ -+ kmem_cache_free(rmap_item_cache, rmap_item); -+} -+ -+static inline struct stable_node *alloc_stable_node(void) -+{ -+ struct stable_node *node; -+ -+ node = kmem_cache_alloc(stable_node_cache, GFP_KERNEL | -+ __GFP_NORETRY | __GFP_NOWARN); -+ if (!node) -+ return NULL; -+ -+ INIT_HLIST_HEAD(&node->hlist); -+ list_add(&node->all_list, &stable_node_list); -+ return node; -+} -+ -+static inline void free_stable_node(struct stable_node *stable_node) -+{ -+ list_del(&stable_node->all_list); -+ kmem_cache_free(stable_node_cache, stable_node); -+} -+ -+static inline struct tree_node *alloc_tree_node(struct list_head *list) -+{ -+ struct tree_node *node; -+ -+ node = kmem_cache_zalloc(tree_node_cache, GFP_KERNEL | -+ __GFP_NORETRY | __GFP_NOWARN); -+ if (!node) -+ return NULL; -+ -+ list_add(&node->all_list, list); -+ return node; -+} -+ -+static inline void free_tree_node(struct tree_node *node) -+{ -+ list_del(&node->all_list); -+ kmem_cache_free(tree_node_cache, node); -+} -+ -+static void uksm_drop_anon_vma(struct rmap_item *rmap_item) -+{ -+ struct anon_vma *anon_vma = rmap_item->anon_vma; -+ -+ put_anon_vma(anon_vma); -+} -+ -+ -+/** -+ * Remove a stable node from stable_tree, may unlink from its tree_node and -+ * may remove its parent tree_node if no other stable node is pending. -+ * -+ * @stable_node The node need to be removed -+ * @unlink_rb Will this node be unlinked from the rbtree? -+ * @remove_tree_ node Will its tree_node be removed if empty? -+ */ -+static void remove_node_from_stable_tree(struct stable_node *stable_node, -+ int unlink_rb, int remove_tree_node) -+{ -+ struct node_vma *node_vma; -+ struct rmap_item *rmap_item; -+ struct hlist_node *n; -+ -+ if (!hlist_empty(&stable_node->hlist)) { -+ hlist_for_each_entry_safe(node_vma, n, -+ &stable_node->hlist, hlist) { -+ hlist_for_each_entry(rmap_item, &node_vma->rmap_hlist, hlist) { -+ uksm_pages_sharing--; -+ -+ uksm_drop_anon_vma(rmap_item); -+ rmap_item->address &= PAGE_MASK; -+ } -+ free_node_vma(node_vma); -+ cond_resched(); -+ } -+ -+ /* the last one is counted as shared */ -+ uksm_pages_shared--; -+ uksm_pages_sharing++; -+ } -+ -+ if (stable_node->tree_node && unlink_rb) { -+ rb_erase(&stable_node->node, -+ &stable_node->tree_node->sub_root); -+ -+ if (RB_EMPTY_ROOT(&stable_node->tree_node->sub_root) && -+ remove_tree_node) { -+ rb_erase(&stable_node->tree_node->node, -+ root_stable_treep); -+ free_tree_node(stable_node->tree_node); -+ } else { -+ stable_node->tree_node->count--; -+ } -+ } -+ -+ free_stable_node(stable_node); -+} -+ -+ -+/* -+ * get_uksm_page: checks if the page indicated by the stable node -+ * is still its ksm page, despite having held no reference to it. -+ * In which case we can trust the content of the page, and it -+ * returns the gotten page; but if the page has now been zapped, -+ * remove the stale node from the stable tree and return NULL. -+ * -+ * You would expect the stable_node to hold a reference to the ksm page. -+ * But if it increments the page's count, swapping out has to wait for -+ * ksmd to come around again before it can free the page, which may take -+ * seconds or even minutes: much too unresponsive. So instead we use a -+ * "keyhole reference": access to the ksm page from the stable node peeps -+ * out through its keyhole to see if that page still holds the right key, -+ * pointing back to this stable node. This relies on freeing a PageAnon -+ * page to reset its page->mapping to NULL, and relies on no other use of -+ * a page to put something that might look like our key in page->mapping. -+ * -+ * include/linux/pagemap.h page_cache_get_speculative() is a good reference, -+ * but this is different - made simpler by uksm_thread_mutex being held, but -+ * interesting for assuming that no other use of the struct page could ever -+ * put our expected_mapping into page->mapping (or a field of the union which -+ * coincides with page->mapping). The RCU calls are not for KSM at all, but -+ * to keep the page_count protocol described with page_cache_get_speculative. -+ * -+ * Note: it is possible that get_uksm_page() will return NULL one moment, -+ * then page the next, if the page is in between page_freeze_refs() and -+ * page_unfreeze_refs(): this shouldn't be a problem anywhere, the page -+ * is on its way to being freed; but it is an anomaly to bear in mind. -+ * -+ * @unlink_rb: if the removal of this node will firstly unlink from -+ * its rbtree. stable_node_reinsert will prevent this when restructuring the -+ * node from its old tree. -+ * -+ * @remove_tree_node: if this is the last one of its tree_node, will the -+ * tree_node be freed ? If we are inserting stable node, this tree_node may -+ * be reused, so don't free it. -+ */ -+static struct page *get_uksm_page(struct stable_node *stable_node, -+ int unlink_rb, int remove_tree_node) -+{ -+ struct page *page; -+ void *expected_mapping; -+ unsigned long kpfn; -+ -+ expected_mapping = (void *)((unsigned long)stable_node | -+ PAGE_MAPPING_KSM); -+again: -+ kpfn = READ_ONCE(stable_node->kpfn); -+ page = pfn_to_page(kpfn); -+ -+ /* -+ * page is computed from kpfn, so on most architectures reading -+ * page->mapping is naturally ordered after reading node->kpfn, -+ * but on Alpha we need to be more careful. -+ */ -+ smp_read_barrier_depends(); -+ -+ if (READ_ONCE(page->mapping) != expected_mapping) -+ goto stale; -+ -+ /* -+ * We cannot do anything with the page while its refcount is 0. -+ * Usually 0 means free, or tail of a higher-order page: in which -+ * case this node is no longer referenced, and should be freed; -+ * however, it might mean that the page is under page_freeze_refs(). -+ * The __remove_mapping() case is easy, again the node is now stale; -+ * but if page is swapcache in migrate_page_move_mapping(), it might -+ * still be our page, in which case it's essential to keep the node. -+ */ -+ while (!get_page_unless_zero(page)) { -+ /* -+ * Another check for page->mapping != expected_mapping would -+ * work here too. We have chosen the !PageSwapCache test to -+ * optimize the common case, when the page is or is about to -+ * be freed: PageSwapCache is cleared (under spin_lock_irq) -+ * in the freeze_refs section of __remove_mapping(); but Anon -+ * page->mapping reset to NULL later, in free_pages_prepare(). -+ */ -+ if (!PageSwapCache(page)) -+ goto stale; -+ cpu_relax(); -+ } -+ -+ if (READ_ONCE(page->mapping) != expected_mapping) { -+ put_page(page); -+ goto stale; -+ } -+ -+ lock_page(page); -+ if (READ_ONCE(page->mapping) != expected_mapping) { -+ unlock_page(page); -+ put_page(page); -+ goto stale; -+ } -+ unlock_page(page); -+ return page; -+stale: -+ /* -+ * We come here from above when page->mapping or !PageSwapCache -+ * suggests that the node is stale; but it might be under migration. -+ * We need smp_rmb(), matching the smp_wmb() in ksm_migrate_page(), -+ * before checking whether node->kpfn has been changed. -+ */ -+ smp_rmb(); -+ if (stable_node->kpfn != kpfn) -+ goto again; -+ -+ remove_node_from_stable_tree(stable_node, unlink_rb, remove_tree_node); -+ -+ return NULL; -+} -+ -+/* -+ * Removing rmap_item from stable or unstable tree. -+ * This function will clean the information from the stable/unstable tree. -+ */ -+static inline void remove_rmap_item_from_tree(struct rmap_item *rmap_item) -+{ -+ if (rmap_item->address & STABLE_FLAG) { -+ struct stable_node *stable_node; -+ struct node_vma *node_vma; -+ struct page *page; -+ -+ node_vma = rmap_item->head; -+ stable_node = node_vma->head; -+ page = get_uksm_page(stable_node, 1, 1); -+ if (!page) -+ goto out; -+ -+ /* -+ * page lock is needed because it's racing with -+ * try_to_unmap_ksm(), etc. -+ */ -+ lock_page(page); -+ hlist_del(&rmap_item->hlist); -+ -+ if (hlist_empty(&node_vma->rmap_hlist)) { -+ hlist_del(&node_vma->hlist); -+ free_node_vma(node_vma); -+ } -+ unlock_page(page); -+ -+ put_page(page); -+ if (hlist_empty(&stable_node->hlist)) { -+ /* do NOT call remove_node_from_stable_tree() here, -+ * it's possible for a forked rmap_item not in -+ * stable tree while the in-tree rmap_items were -+ * deleted. -+ */ -+ uksm_pages_shared--; -+ } else -+ uksm_pages_sharing--; -+ -+ -+ uksm_drop_anon_vma(rmap_item); -+ } else if (rmap_item->address & UNSTABLE_FLAG) { -+ if (rmap_item->hash_round == uksm_hash_round) { -+ -+ rb_erase(&rmap_item->node, -+ &rmap_item->tree_node->sub_root); -+ if (RB_EMPTY_ROOT(&rmap_item->tree_node->sub_root)) { -+ rb_erase(&rmap_item->tree_node->node, -+ &root_unstable_tree); -+ -+ free_tree_node(rmap_item->tree_node); -+ } else -+ rmap_item->tree_node->count--; -+ } -+ uksm_pages_unshared--; -+ } -+ -+ rmap_item->address &= PAGE_MASK; -+ rmap_item->hash_max = 0; -+ -+out: -+ cond_resched(); /* we're called from many long loops */ -+} -+ -+static inline int slot_in_uksm(struct vma_slot *slot) -+{ -+ return list_empty(&slot->slot_list); -+} -+ -+/* -+ * Test if the mm is exiting -+ */ -+static inline bool uksm_test_exit(struct mm_struct *mm) -+{ -+ return atomic_read(&mm->mm_users) == 0; -+} -+ -+static inline unsigned long vma_pool_size(struct vma_slot *slot) -+{ -+ return round_up(sizeof(struct rmap_list_entry) * slot->pages, -+ PAGE_SIZE) >> PAGE_SHIFT; -+} -+ -+#define CAN_OVERFLOW_U64(x, delta) (U64_MAX - (x) < (delta)) -+ -+/* must be done with sem locked */ -+static int slot_pool_alloc(struct vma_slot *slot) -+{ -+ unsigned long pool_size; -+ -+ if (slot->rmap_list_pool) -+ return 0; -+ -+ pool_size = vma_pool_size(slot); -+ slot->rmap_list_pool = kcalloc(pool_size, sizeof(struct page *), -+ GFP_KERNEL); -+ if (!slot->rmap_list_pool) -+ return -ENOMEM; -+ -+ slot->pool_counts = kcalloc(pool_size, sizeof(unsigned int), -+ GFP_KERNEL); -+ if (!slot->pool_counts) { -+ kfree(slot->rmap_list_pool); -+ return -ENOMEM; -+ } -+ -+ slot->pool_size = pool_size; -+ BUG_ON(CAN_OVERFLOW_U64(uksm_pages_total, slot->pages)); -+ slot->flags |= UKSM_SLOT_IN_UKSM; -+ uksm_pages_total += slot->pages; -+ -+ return 0; -+} -+ -+/* -+ * Called after vma is unlinked from its mm -+ */ -+void uksm_remove_vma(struct vm_area_struct *vma) -+{ -+ struct vma_slot *slot; -+ -+ if (!vma->uksm_vma_slot) -+ return; -+ -+ spin_lock(&vma_slot_list_lock); -+ slot = vma->uksm_vma_slot; -+ if (!slot) -+ goto out; -+ -+ if (slot_in_uksm(slot)) { -+ /** -+ * This slot has been added by ksmd, so move to the del list -+ * waiting ksmd to free it. -+ */ -+ list_add_tail(&slot->slot_list, &vma_slot_del); -+ } else { -+ /** -+ * It's still on new list. It's ok to free slot directly. -+ */ -+ list_del(&slot->slot_list); -+ free_vma_slot(slot); -+ } -+out: -+ vma->uksm_vma_slot = NULL; -+ spin_unlock(&vma_slot_list_lock); -+} -+ -+/** -+ * Need to do two things: -+ * 1. check if slot was moved to del list -+ * 2. make sure the mmap_sem is manipulated under valid vma. -+ * -+ * My concern here is that in some cases, this may make -+ * vma_slot_list_lock() waiters to serialized further by some -+ * sem->wait_lock, can this really be expensive? -+ * -+ * -+ * @return -+ * 0: if successfully locked mmap_sem -+ * -ENOENT: this slot was moved to del list -+ * -EBUSY: vma lock failed -+ */ -+static int try_down_read_slot_mmap_sem(struct vma_slot *slot) -+{ -+ struct vm_area_struct *vma; -+ struct mm_struct *mm; -+ struct rw_semaphore *sem; -+ -+ spin_lock(&vma_slot_list_lock); -+ -+ /* the slot_list was removed and inited from new list, when it enters -+ * uksm_list. If now it's not empty, then it must be moved to del list -+ */ -+ if (!slot_in_uksm(slot)) { -+ spin_unlock(&vma_slot_list_lock); -+ return -ENOENT; -+ } -+ -+ BUG_ON(slot->pages != vma_pages(slot->vma)); -+ /* Ok, vma still valid */ -+ vma = slot->vma; -+ mm = vma->vm_mm; -+ sem = &mm->mmap_sem; -+ -+ if (uksm_test_exit(mm)) { -+ spin_unlock(&vma_slot_list_lock); -+ return -ENOENT; -+ } -+ -+ if (down_read_trylock(sem)) { -+ spin_unlock(&vma_slot_list_lock); -+ if (slot_pool_alloc(slot)) { -+ uksm_remove_vma(vma); -+ up_read(sem); -+ return -ENOENT; -+ } -+ return 0; -+ } -+ -+ spin_unlock(&vma_slot_list_lock); -+ return -EBUSY; -+} -+ -+static inline unsigned long -+vma_page_address(struct page *page, struct vm_area_struct *vma) -+{ -+ pgoff_t pgoff = page->index; -+ unsigned long address; -+ -+ address = vma->vm_start + ((pgoff - vma->vm_pgoff) << PAGE_SHIFT); -+ if (unlikely(address < vma->vm_start || address >= vma->vm_end)) { -+ /* page should be within @vma mapping range */ -+ return -EFAULT; -+ } -+ return address; -+} -+ -+ -+/* return 0 on success with the item's mmap_sem locked */ -+static inline int get_mergeable_page_lock_mmap(struct rmap_item *item) -+{ -+ struct mm_struct *mm; -+ struct vma_slot *slot = item->slot; -+ int err = -EINVAL; -+ -+ struct page *page; -+ -+ /* -+ * try_down_read_slot_mmap_sem() returns non-zero if the slot -+ * has been removed by uksm_remove_vma(). -+ */ -+ if (try_down_read_slot_mmap_sem(slot)) -+ return -EBUSY; -+ -+ mm = slot->vma->vm_mm; -+ -+ if (uksm_test_exit(mm)) -+ goto failout_up; -+ -+ page = item->page; -+ rcu_read_lock(); -+ if (!get_page_unless_zero(page)) { -+ rcu_read_unlock(); -+ goto failout_up; -+ } -+ -+ /* No need to consider huge page here. */ -+ if (item->slot->vma->anon_vma != page_anon_vma(page) || -+ vma_page_address(page, item->slot->vma) != get_rmap_addr(item)) { -+ /* -+ * TODO: -+ * should we release this item becase of its stale page -+ * mapping? -+ */ -+ put_page(page); -+ rcu_read_unlock(); -+ goto failout_up; -+ } -+ rcu_read_unlock(); -+ return 0; -+ -+failout_up: -+ up_read(&mm->mmap_sem); -+ return err; -+} -+ -+/* -+ * What kind of VMA is considered ? -+ */ -+static inline int vma_can_enter(struct vm_area_struct *vma) -+{ -+ return uksm_flags_can_scan(vma->vm_flags); -+} -+ -+/* -+ * Called whenever a fresh new vma is created A new vma_slot. -+ * is created and inserted into a global list Must be called. -+ * after vma is inserted to its mm. -+ */ -+void uksm_vma_add_new(struct vm_area_struct *vma) -+{ -+ struct vma_slot *slot; -+ -+ if (!vma_can_enter(vma)) { -+ vma->uksm_vma_slot = NULL; -+ return; -+ } -+ -+ slot = alloc_vma_slot(); -+ if (!slot) { -+ vma->uksm_vma_slot = NULL; -+ return; -+ } -+ -+ vma->uksm_vma_slot = slot; -+ vma->vm_flags |= VM_MERGEABLE; -+ slot->vma = vma; -+ slot->mm = vma->vm_mm; -+ slot->ctime_j = jiffies; -+ slot->pages = vma_pages(vma); -+ spin_lock(&vma_slot_list_lock); -+ list_add_tail(&slot->slot_list, &vma_slot_new); -+ spin_unlock(&vma_slot_list_lock); -+} -+ -+/* 32/3 < they < 32/2 */ -+#define shiftl 8 -+#define shiftr 12 -+ -+#define HASH_FROM_TO(from, to) \ -+for (index = from; index < to; index++) { \ -+ pos = random_nums[index]; \ -+ hash += key[pos]; \ -+ hash += (hash << shiftl); \ -+ hash ^= (hash >> shiftr); \ -+} -+ -+ -+#define HASH_FROM_DOWN_TO(from, to) \ -+for (index = from - 1; index >= to; index--) { \ -+ hash ^= (hash >> shiftr); \ -+ hash ^= (hash >> (shiftr*2)); \ -+ hash -= (hash << shiftl); \ -+ hash += (hash << (shiftl*2)); \ -+ pos = random_nums[index]; \ -+ hash -= key[pos]; \ -+} -+ -+/* -+ * The main random sample hash function. -+ */ -+static u32 random_sample_hash(void *addr, u32 hash_strength) -+{ -+ u32 hash = 0xdeadbeef; -+ int index, pos, loop = hash_strength; -+ u32 *key = (u32 *)addr; -+ -+ if (loop > HASH_STRENGTH_FULL) -+ loop = HASH_STRENGTH_FULL; -+ -+ HASH_FROM_TO(0, loop); -+ -+ if (hash_strength > HASH_STRENGTH_FULL) { -+ loop = hash_strength - HASH_STRENGTH_FULL; -+ HASH_FROM_TO(0, loop); -+ } -+ -+ return hash; -+} -+ -+ -+/** -+ * It's used when hash strength is adjusted -+ * -+ * @addr The page's virtual address -+ * @from The original hash strength -+ * @to The hash strength changed to -+ * @hash The hash value generated with "from" hash value -+ * -+ * return the hash value -+ */ -+static u32 delta_hash(void *addr, int from, int to, u32 hash) -+{ -+ u32 *key = (u32 *)addr; -+ int index, pos; /* make sure they are int type */ -+ -+ if (to > from) { -+ if (from >= HASH_STRENGTH_FULL) { -+ from -= HASH_STRENGTH_FULL; -+ to -= HASH_STRENGTH_FULL; -+ HASH_FROM_TO(from, to); -+ } else if (to <= HASH_STRENGTH_FULL) { -+ HASH_FROM_TO(from, to); -+ } else { -+ HASH_FROM_TO(from, HASH_STRENGTH_FULL); -+ HASH_FROM_TO(0, to - HASH_STRENGTH_FULL); -+ } -+ } else { -+ if (from <= HASH_STRENGTH_FULL) { -+ HASH_FROM_DOWN_TO(from, to); -+ } else if (to >= HASH_STRENGTH_FULL) { -+ from -= HASH_STRENGTH_FULL; -+ to -= HASH_STRENGTH_FULL; -+ HASH_FROM_DOWN_TO(from, to); -+ } else { -+ HASH_FROM_DOWN_TO(from - HASH_STRENGTH_FULL, 0); -+ HASH_FROM_DOWN_TO(HASH_STRENGTH_FULL, to); -+ } -+ } -+ -+ return hash; -+} -+ -+/** -+ * -+ * Called when: rshash_pos or rshash_neg is about to overflow or a scan round -+ * has finished. -+ * -+ * return 0 if no page has been scanned since last call, 1 otherwise. -+ */ -+static inline int encode_benefit(void) -+{ -+ u64 scanned_delta, pos_delta, neg_delta; -+ unsigned long base = benefit.base; -+ -+ scanned_delta = uksm_pages_scanned - uksm_pages_scanned_last; -+ -+ if (!scanned_delta) -+ return 0; -+ -+ scanned_delta >>= base; -+ pos_delta = rshash_pos >> base; -+ neg_delta = rshash_neg >> base; -+ -+ if (CAN_OVERFLOW_U64(benefit.pos, pos_delta) || -+ CAN_OVERFLOW_U64(benefit.neg, neg_delta) || -+ CAN_OVERFLOW_U64(benefit.scanned, scanned_delta)) { -+ benefit.scanned >>= 1; -+ benefit.neg >>= 1; -+ benefit.pos >>= 1; -+ benefit.base++; -+ scanned_delta >>= 1; -+ pos_delta >>= 1; -+ neg_delta >>= 1; -+ } -+ -+ benefit.pos += pos_delta; -+ benefit.neg += neg_delta; -+ benefit.scanned += scanned_delta; -+ -+ BUG_ON(!benefit.scanned); -+ -+ rshash_pos = rshash_neg = 0; -+ uksm_pages_scanned_last = uksm_pages_scanned; -+ -+ return 1; -+} -+ -+static inline void reset_benefit(void) -+{ -+ benefit.pos = 0; -+ benefit.neg = 0; -+ benefit.base = 0; -+ benefit.scanned = 0; -+} -+ -+static inline void inc_rshash_pos(unsigned long delta) -+{ -+ if (CAN_OVERFLOW_U64(rshash_pos, delta)) -+ encode_benefit(); -+ -+ rshash_pos += delta; -+} -+ -+static inline void inc_rshash_neg(unsigned long delta) -+{ -+ if (CAN_OVERFLOW_U64(rshash_neg, delta)) -+ encode_benefit(); -+ -+ rshash_neg += delta; -+} -+ -+ -+static inline u32 page_hash(struct page *page, unsigned long hash_strength, -+ int cost_accounting) -+{ -+ u32 val; -+ unsigned long delta; -+ -+ void *addr = kmap_atomic(page); -+ -+ val = random_sample_hash(addr, hash_strength); -+ kunmap_atomic(addr); -+ -+ if (cost_accounting) { -+ if (hash_strength < HASH_STRENGTH_FULL) -+ delta = HASH_STRENGTH_FULL - hash_strength; -+ else -+ delta = 0; -+ -+ inc_rshash_pos(delta); -+ } -+ -+ return val; -+} -+ -+static int memcmp_pages(struct page *page1, struct page *page2, -+ int cost_accounting) -+{ -+ char *addr1, *addr2; -+ int ret; -+ -+ addr1 = kmap_atomic(page1); -+ addr2 = kmap_atomic(page2); -+ ret = memcmp(addr1, addr2, PAGE_SIZE); -+ kunmap_atomic(addr2); -+ kunmap_atomic(addr1); -+ -+ if (cost_accounting) -+ inc_rshash_neg(memcmp_cost); -+ -+ return ret; -+} -+ -+static inline int pages_identical(struct page *page1, struct page *page2) -+{ -+ return !memcmp_pages(page1, page2, 0); -+} -+ -+static inline int is_page_full_zero(struct page *page) -+{ -+ char *addr; -+ int ret; -+ -+ addr = kmap_atomic(page); -+ ret = is_full_zero(addr, PAGE_SIZE); -+ kunmap_atomic(addr); -+ -+ return ret; -+} -+ -+static int write_protect_page(struct vm_area_struct *vma, struct page *page, -+ pte_t *orig_pte, pte_t *old_pte) -+{ -+ struct mm_struct *mm = vma->vm_mm; -+ struct page_vma_mapped_walk pvmw = { -+ .page = page, -+ .vma = vma, -+ }; -+ int swapped; -+ int err = -EFAULT; -+ unsigned long mmun_start; /* For mmu_notifiers */ -+ unsigned long mmun_end; /* For mmu_notifiers */ -+ -+ pvmw.address = page_address_in_vma(page, vma); -+ if (pvmw.address == -EFAULT) -+ goto out; -+ -+ BUG_ON(PageTransCompound(page)); -+ -+ mmun_start = pvmw.address; -+ mmun_end = pvmw.address + PAGE_SIZE; -+ mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end); -+ -+ if (!page_vma_mapped_walk(&pvmw)) -+ goto out_mn; -+ if (WARN_ONCE(!pvmw.pte, "Unexpected PMD mapping?")) -+ goto out_unlock; -+ -+ if (old_pte) -+ *old_pte = *pvmw.pte; -+ -+ if (pte_write(*pvmw.pte) || pte_dirty(*pvmw.pte) || -+ (pte_protnone(*pvmw.pte) && pte_savedwrite(*pvmw.pte)) || mm_tlb_flush_pending(mm)) { -+ pte_t entry; -+ -+ swapped = PageSwapCache(page); -+ flush_cache_page(vma, pvmw.address, page_to_pfn(page)); -+ /* -+ * Ok this is tricky, when get_user_pages_fast() run it doesn't -+ * take any lock, therefore the check that we are going to make -+ * with the pagecount against the mapcount is racey and -+ * O_DIRECT can happen right after the check. -+ * So we clear the pte and flush the tlb before the check -+ * this assure us that no O_DIRECT can happen after the check -+ * or in the middle of the check. -+ */ -+ entry = ptep_clear_flush_notify(vma, pvmw.address, pvmw.pte); -+ /* -+ * Check that no O_DIRECT or similar I/O is in progress on the -+ * page -+ */ -+ if (page_mapcount(page) + 1 + swapped != page_count(page)) { -+ set_pte_at(mm, pvmw.address, pvmw.pte, entry); -+ goto out_unlock; -+ } -+ if (pte_dirty(entry)) -+ set_page_dirty(page); -+ -+ if (pte_protnone(entry)) -+ entry = pte_mkclean(pte_clear_savedwrite(entry)); -+ else -+ entry = pte_mkclean(pte_wrprotect(entry)); -+ -+ set_pte_at_notify(mm, pvmw.address, pvmw.pte, entry); -+ } -+ *orig_pte = *pvmw.pte; -+ err = 0; -+ -+out_unlock: -+ page_vma_mapped_walk_done(&pvmw); -+out_mn: -+ mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end); -+out: -+ return err; -+} -+ -+#define MERGE_ERR_PGERR 1 /* the page is invalid cannot continue */ -+#define MERGE_ERR_COLLI 2 /* there is a collision */ -+#define MERGE_ERR_COLLI_MAX 3 /* collision at the max hash strength */ -+#define MERGE_ERR_CHANGED 4 /* the page has changed since last hash */ -+ -+ -+/** -+ * replace_page - replace page in vma by new ksm page -+ * @vma: vma that holds the pte pointing to page -+ * @page: the page we are replacing by kpage -+ * @kpage: the ksm page we replace page by -+ * @orig_pte: the original value of the pte -+ * -+ * Returns 0 on success, MERGE_ERR_PGERR on failure. -+ */ -+static int replace_page(struct vm_area_struct *vma, struct page *page, -+ struct page *kpage, pte_t orig_pte) -+{ -+ struct mm_struct *mm = vma->vm_mm; -+ pgd_t *pgd; -+ p4d_t *p4d; -+ pud_t *pud; -+ pmd_t *pmd; -+ pte_t *ptep; -+ spinlock_t *ptl; -+ pte_t entry; -+ -+ unsigned long addr; -+ int err = MERGE_ERR_PGERR; -+ unsigned long mmun_start; /* For mmu_notifiers */ -+ unsigned long mmun_end; /* For mmu_notifiers */ -+ -+ addr = page_address_in_vma(page, vma); -+ if (addr == -EFAULT) -+ goto out; -+ -+ pgd = pgd_offset(mm, addr); -+ if (!pgd_present(*pgd)) -+ goto out; -+ -+ p4d = p4d_offset(pgd, addr); -+ pud = pud_offset(p4d, addr); -+ if (!pud_present(*pud)) -+ goto out; -+ -+ pmd = pmd_offset(pud, addr); -+ BUG_ON(pmd_trans_huge(*pmd)); -+ if (!pmd_present(*pmd)) -+ goto out; -+ -+ mmun_start = addr; -+ mmun_end = addr + PAGE_SIZE; -+ mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end); -+ -+ ptep = pte_offset_map_lock(mm, pmd, addr, &ptl); -+ if (!pte_same(*ptep, orig_pte)) { -+ pte_unmap_unlock(ptep, ptl); -+ goto out_mn; -+ } -+ -+ flush_cache_page(vma, addr, pte_pfn(*ptep)); -+ ptep_clear_flush_notify(vma, addr, ptep); -+ entry = mk_pte(kpage, vma->vm_page_prot); -+ -+ /* special treatment is needed for zero_page */ -+ if ((page_to_pfn(kpage) == uksm_zero_pfn) || -+ (page_to_pfn(kpage) == zero_pfn)) { -+ entry = pte_mkspecial(entry); -+ dec_mm_counter(mm, MM_ANONPAGES); -+ inc_zone_page_state(page, NR_UKSM_ZERO_PAGES); -+ } else { -+ get_page(kpage); -+ page_add_anon_rmap(kpage, vma, addr, false); -+ } -+ -+ set_pte_at_notify(mm, addr, ptep, entry); -+ -+ page_remove_rmap(page, false); -+ if (!page_mapped(page)) -+ try_to_free_swap(page); -+ put_page(page); -+ -+ pte_unmap_unlock(ptep, ptl); -+ err = 0; -+out_mn: -+ mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end); -+out: -+ return err; -+} -+ -+ -+/** -+ * Fully hash a page with HASH_STRENGTH_MAX return a non-zero hash value. The -+ * zero hash value at HASH_STRENGTH_MAX is used to indicated that its -+ * hash_max member has not been calculated. -+ * -+ * @page The page needs to be hashed -+ * @hash_old The hash value calculated with current hash strength -+ * -+ * return the new hash value calculated at HASH_STRENGTH_MAX -+ */ -+static inline u32 page_hash_max(struct page *page, u32 hash_old) -+{ -+ u32 hash_max = 0; -+ void *addr; -+ -+ addr = kmap_atomic(page); -+ hash_max = delta_hash(addr, hash_strength, -+ HASH_STRENGTH_MAX, hash_old); -+ -+ kunmap_atomic(addr); -+ -+ if (!hash_max) -+ hash_max = 1; -+ -+ inc_rshash_neg(HASH_STRENGTH_MAX - hash_strength); -+ return hash_max; -+} -+ -+/* -+ * We compare the hash again, to ensure that it is really a hash collision -+ * instead of being caused by page write. -+ */ -+static inline int check_collision(struct rmap_item *rmap_item, -+ u32 hash) -+{ -+ int err; -+ struct page *page = rmap_item->page; -+ -+ /* if this rmap_item has already been hash_maxed, then the collision -+ * must appears in the second-level rbtree search. In this case we check -+ * if its hash_max value has been changed. Otherwise, the collision -+ * happens in the first-level rbtree search, so we check against it's -+ * current hash value. -+ */ -+ if (rmap_item->hash_max) { -+ inc_rshash_neg(memcmp_cost); -+ inc_rshash_neg(HASH_STRENGTH_MAX - hash_strength); -+ -+ if (rmap_item->hash_max == page_hash_max(page, hash)) -+ err = MERGE_ERR_COLLI; -+ else -+ err = MERGE_ERR_CHANGED; -+ } else { -+ inc_rshash_neg(memcmp_cost + hash_strength); -+ -+ if (page_hash(page, hash_strength, 0) == hash) -+ err = MERGE_ERR_COLLI; -+ else -+ err = MERGE_ERR_CHANGED; -+ } -+ -+ return err; -+} -+ -+/** -+ * Try to merge a rmap_item.page with a kpage in stable node. kpage must -+ * already be a ksm page. -+ * -+ * @return 0 if the pages were merged, -EFAULT otherwise. -+ */ -+static int try_to_merge_with_uksm_page(struct rmap_item *rmap_item, -+ struct page *kpage, u32 hash) -+{ -+ struct vm_area_struct *vma = rmap_item->slot->vma; -+ struct mm_struct *mm = vma->vm_mm; -+ pte_t orig_pte = __pte(0); -+ int err = MERGE_ERR_PGERR; -+ struct page *page; -+ -+ if (uksm_test_exit(mm)) -+ goto out; -+ -+ page = rmap_item->page; -+ -+ if (page == kpage) { /* ksm page forked */ -+ err = 0; -+ goto out; -+ } -+ -+ /* -+ * We need the page lock to read a stable PageSwapCache in -+ * write_protect_page(). We use trylock_page() instead of -+ * lock_page() because we don't want to wait here - we -+ * prefer to continue scanning and merging different pages, -+ * then come back to this page when it is unlocked. -+ */ -+ if (!trylock_page(page)) -+ goto out; -+ -+ if (!PageAnon(page) || !PageKsm(kpage)) -+ goto out_unlock; -+ -+ if (PageTransCompound(page)) { -+ err = split_huge_page(page); -+ if (err) -+ goto out_unlock; -+ } -+ -+ /* -+ * If this anonymous page is mapped only here, its pte may need -+ * to be write-protected. If it's mapped elsewhere, all of its -+ * ptes are necessarily already write-protected. But in either -+ * case, we need to lock and check page_count is not raised. -+ */ -+ if (write_protect_page(vma, page, &orig_pte, NULL) == 0) { -+ if (pages_identical(page, kpage)) -+ err = replace_page(vma, page, kpage, orig_pte); -+ else -+ err = check_collision(rmap_item, hash); -+ } -+ -+ if ((vma->vm_flags & VM_LOCKED) && kpage && !err) { -+ munlock_vma_page(page); -+ if (!PageMlocked(kpage)) { -+ unlock_page(page); -+ lock_page(kpage); -+ mlock_vma_page(kpage); -+ page = kpage; /* for final unlock */ -+ } -+ } -+ -+out_unlock: -+ unlock_page(page); -+out: -+ return err; -+} -+ -+ -+ -+/** -+ * If two pages fail to merge in try_to_merge_two_pages, then we have a chance -+ * to restore a page mapping that has been changed in try_to_merge_two_pages. -+ * -+ * @return 0 on success. -+ */ -+static int restore_uksm_page_pte(struct vm_area_struct *vma, unsigned long addr, -+ pte_t orig_pte, pte_t wprt_pte) -+{ -+ struct mm_struct *mm = vma->vm_mm; -+ pgd_t *pgd; -+ p4d_t *p4d; -+ pud_t *pud; -+ pmd_t *pmd; -+ pte_t *ptep; -+ spinlock_t *ptl; -+ -+ int err = -EFAULT; -+ -+ pgd = pgd_offset(mm, addr); -+ if (!pgd_present(*pgd)) -+ goto out; -+ -+ p4d = p4d_offset(pgd, addr); -+ pud = pud_offset(p4d, addr); -+ if (!pud_present(*pud)) -+ goto out; -+ -+ pmd = pmd_offset(pud, addr); -+ if (!pmd_present(*pmd)) -+ goto out; -+ -+ ptep = pte_offset_map_lock(mm, pmd, addr, &ptl); -+ if (!pte_same(*ptep, wprt_pte)) { -+ /* already copied, let it be */ -+ pte_unmap_unlock(ptep, ptl); -+ goto out; -+ } -+ -+ /* -+ * Good boy, still here. When we still get the ksm page, it does not -+ * return to the free page pool, there is no way that a pte was changed -+ * to other page and gets back to this page. And remind that ksm page -+ * do not reuse in do_wp_page(). So it's safe to restore the original -+ * pte. -+ */ -+ flush_cache_page(vma, addr, pte_pfn(*ptep)); -+ ptep_clear_flush_notify(vma, addr, ptep); -+ set_pte_at_notify(mm, addr, ptep, orig_pte); -+ -+ pte_unmap_unlock(ptep, ptl); -+ err = 0; -+out: -+ return err; -+} -+ -+/** -+ * try_to_merge_two_pages() - take two identical pages and prepare -+ * them to be merged into one page(rmap_item->page) -+ * -+ * @return 0 if we successfully merged two identical pages into -+ * one ksm page. MERGE_ERR_COLLI if it's only a hash collision -+ * search in rbtree. MERGE_ERR_CHANGED if rmap_item has been -+ * changed since it's hashed. MERGE_ERR_PGERR otherwise. -+ * -+ */ -+static int try_to_merge_two_pages(struct rmap_item *rmap_item, -+ struct rmap_item *tree_rmap_item, -+ u32 hash) -+{ -+ pte_t orig_pte1 = __pte(0), orig_pte2 = __pte(0); -+ pte_t wprt_pte1 = __pte(0), wprt_pte2 = __pte(0); -+ struct vm_area_struct *vma1 = rmap_item->slot->vma; -+ struct vm_area_struct *vma2 = tree_rmap_item->slot->vma; -+ struct page *page = rmap_item->page; -+ struct page *tree_page = tree_rmap_item->page; -+ int err = MERGE_ERR_PGERR; -+ struct address_space *saved_mapping; -+ -+ -+ if (rmap_item->page == tree_rmap_item->page) -+ goto out; -+ -+ if (!trylock_page(page)) -+ goto out; -+ -+ if (!PageAnon(page)) -+ goto out_unlock; -+ -+ if (PageTransCompound(page)) { -+ err = split_huge_page(page); -+ if (err) -+ goto out_unlock; -+ } -+ -+ if (write_protect_page(vma1, page, &wprt_pte1, &orig_pte1) != 0) { -+ unlock_page(page); -+ goto out; -+ } -+ -+ /* -+ * While we hold page lock, upgrade page from -+ * PageAnon+anon_vma to PageKsm+NULL stable_node: -+ * stable_tree_insert() will update stable_node. -+ */ -+ saved_mapping = page->mapping; -+ set_page_stable_node(page, NULL); -+ mark_page_accessed(page); -+ if (!PageDirty(page)) -+ SetPageDirty(page); -+ -+ unlock_page(page); -+ -+ if (!trylock_page(tree_page)) -+ goto restore_out; -+ -+ if (!PageAnon(tree_page)) { -+ unlock_page(tree_page); -+ goto restore_out; -+ } -+ -+ if (PageTransCompound(tree_page)) { -+ err = split_huge_page(tree_page); -+ if (err) { -+ unlock_page(tree_page); -+ goto restore_out; -+ } -+ } -+ -+ if (write_protect_page(vma2, tree_page, &wprt_pte2, &orig_pte2) != 0) { -+ unlock_page(tree_page); -+ goto restore_out; -+ } -+ -+ if (pages_identical(page, tree_page)) { -+ err = replace_page(vma2, tree_page, page, wprt_pte2); -+ if (err) { -+ unlock_page(tree_page); -+ goto restore_out; -+ } -+ -+ if ((vma2->vm_flags & VM_LOCKED)) { -+ munlock_vma_page(tree_page); -+ if (!PageMlocked(page)) { -+ unlock_page(tree_page); -+ lock_page(page); -+ mlock_vma_page(page); -+ tree_page = page; /* for final unlock */ -+ } -+ } -+ -+ unlock_page(tree_page); -+ -+ goto out; /* success */ -+ -+ } else { -+ if (tree_rmap_item->hash_max && -+ tree_rmap_item->hash_max == rmap_item->hash_max) { -+ err = MERGE_ERR_COLLI_MAX; -+ } else if (page_hash(page, hash_strength, 0) == -+ page_hash(tree_page, hash_strength, 0)) { -+ inc_rshash_neg(memcmp_cost + hash_strength * 2); -+ err = MERGE_ERR_COLLI; -+ } else { -+ err = MERGE_ERR_CHANGED; -+ } -+ -+ unlock_page(tree_page); -+ } -+ -+restore_out: -+ lock_page(page); -+ if (!restore_uksm_page_pte(vma1, get_rmap_addr(rmap_item), -+ orig_pte1, wprt_pte1)) -+ page->mapping = saved_mapping; -+ -+out_unlock: -+ unlock_page(page); -+out: -+ return err; -+} -+ -+static inline int hash_cmp(u32 new_val, u32 node_val) -+{ -+ if (new_val > node_val) -+ return 1; -+ else if (new_val < node_val) -+ return -1; -+ else -+ return 0; -+} -+ -+static inline u32 rmap_item_hash_max(struct rmap_item *item, u32 hash) -+{ -+ u32 hash_max = item->hash_max; -+ -+ if (!hash_max) { -+ hash_max = page_hash_max(item->page, hash); -+ -+ item->hash_max = hash_max; -+ } -+ -+ return hash_max; -+} -+ -+ -+ -+/** -+ * stable_tree_search() - search the stable tree for a page -+ * -+ * @item: the rmap_item we are comparing with -+ * @hash: the hash value of this item->page already calculated -+ * -+ * @return the page we have found, NULL otherwise. The page returned has -+ * been gotten. -+ */ -+static struct page *stable_tree_search(struct rmap_item *item, u32 hash) -+{ -+ struct rb_node *node = root_stable_treep->rb_node; -+ struct tree_node *tree_node; -+ unsigned long hash_max; -+ struct page *page = item->page; -+ struct stable_node *stable_node; -+ -+ stable_node = page_stable_node(page); -+ if (stable_node) { -+ /* ksm page forked, that is -+ * if (PageKsm(page) && !in_stable_tree(rmap_item)) -+ * it's actually gotten once outside. -+ */ -+ get_page(page); -+ return page; -+ } -+ -+ while (node) { -+ int cmp; -+ -+ tree_node = rb_entry(node, struct tree_node, node); -+ -+ cmp = hash_cmp(hash, tree_node->hash); -+ -+ if (cmp < 0) -+ node = node->rb_left; -+ else if (cmp > 0) -+ node = node->rb_right; -+ else -+ break; -+ } -+ -+ if (!node) -+ return NULL; -+ -+ if (tree_node->count == 1) { -+ stable_node = rb_entry(tree_node->sub_root.rb_node, -+ struct stable_node, node); -+ BUG_ON(!stable_node); -+ -+ goto get_page_out; -+ } -+ -+ /* -+ * ok, we have to search the second -+ * level subtree, hash the page to a -+ * full strength. -+ */ -+ node = tree_node->sub_root.rb_node; -+ BUG_ON(!node); -+ hash_max = rmap_item_hash_max(item, hash); -+ -+ while (node) { -+ int cmp; -+ -+ stable_node = rb_entry(node, struct stable_node, node); -+ -+ cmp = hash_cmp(hash_max, stable_node->hash_max); -+ -+ if (cmp < 0) -+ node = node->rb_left; -+ else if (cmp > 0) -+ node = node->rb_right; -+ else -+ goto get_page_out; -+ } -+ -+ return NULL; -+ -+get_page_out: -+ page = get_uksm_page(stable_node, 1, 1); -+ return page; -+} -+ -+static int try_merge_rmap_item(struct rmap_item *item, -+ struct page *kpage, -+ struct page *tree_page) -+{ -+ struct vm_area_struct *vma = item->slot->vma; -+ struct page_vma_mapped_walk pvmw = { -+ .page = kpage, -+ .vma = vma, -+ }; -+ -+ pvmw.address = get_rmap_addr(item); -+ if (!page_vma_mapped_walk(&pvmw)) -+ return 0; -+ -+ if (pte_write(*pvmw.pte)) { -+ /* has changed, abort! */ -+ page_vma_mapped_walk_done(&pvmw); -+ return 0; -+ } -+ -+ get_page(tree_page); -+ page_add_anon_rmap(tree_page, vma, pvmw.address, false); -+ -+ flush_cache_page(vma, pvmw.address, page_to_pfn(kpage)); -+ ptep_clear_flush_notify(vma, pvmw.address, pvmw.pte); -+ set_pte_at_notify(vma->vm_mm, pvmw.address, pvmw.pte, -+ mk_pte(tree_page, vma->vm_page_prot)); -+ -+ page_remove_rmap(kpage, false); -+ put_page(kpage); -+ -+ page_vma_mapped_walk_done(&pvmw); -+ -+ return 1; -+} -+ -+/** -+ * try_to_merge_with_stable_page() - when two rmap_items need to be inserted -+ * into stable tree, the page was found to be identical to a stable ksm page, -+ * this is the last chance we can merge them into one. -+ * -+ * @item1: the rmap_item holding the page which we wanted to insert -+ * into stable tree. -+ * @item2: the other rmap_item we found when unstable tree search -+ * @oldpage: the page currently mapped by the two rmap_items -+ * @tree_page: the page we found identical in stable tree node -+ * @success1: return if item1 is successfully merged -+ * @success2: return if item2 is successfully merged -+ */ -+static void try_merge_with_stable(struct rmap_item *item1, -+ struct rmap_item *item2, -+ struct page **kpage, -+ struct page *tree_page, -+ int *success1, int *success2) -+{ -+ struct vm_area_struct *vma1 = item1->slot->vma; -+ struct vm_area_struct *vma2 = item2->slot->vma; -+ *success1 = 0; -+ *success2 = 0; -+ -+ if (unlikely(*kpage == tree_page)) { -+ /* I don't think this can really happen */ -+ pr_warn("UKSM: unexpected condition detected in " -+ "%s -- *kpage == tree_page !\n", __func__); -+ *success1 = 1; -+ *success2 = 1; -+ return; -+ } -+ -+ if (!PageAnon(*kpage) || !PageKsm(*kpage)) -+ goto failed; -+ -+ if (!trylock_page(tree_page)) -+ goto failed; -+ -+ /* If the oldpage is still ksm and still pointed -+ * to in the right place, and still write protected, -+ * we are confident it's not changed, no need to -+ * memcmp anymore. -+ * be ware, we cannot take nested pte locks, -+ * deadlock risk. -+ */ -+ if (!try_merge_rmap_item(item1, *kpage, tree_page)) -+ goto unlock_failed; -+ -+ /* ok, then vma2, remind that pte1 already set */ -+ if (!try_merge_rmap_item(item2, *kpage, tree_page)) -+ goto success_1; -+ -+ *success2 = 1; -+success_1: -+ *success1 = 1; -+ -+ -+ if ((*success1 && vma1->vm_flags & VM_LOCKED) || -+ (*success2 && vma2->vm_flags & VM_LOCKED)) { -+ munlock_vma_page(*kpage); -+ if (!PageMlocked(tree_page)) -+ mlock_vma_page(tree_page); -+ } -+ -+ /* -+ * We do not need oldpage any more in the caller, so can break the lock -+ * now. -+ */ -+ unlock_page(*kpage); -+ *kpage = tree_page; /* Get unlocked outside. */ -+ return; -+ -+unlock_failed: -+ unlock_page(tree_page); -+failed: -+ return; -+} -+ -+static inline void stable_node_hash_max(struct stable_node *node, -+ struct page *page, u32 hash) -+{ -+ u32 hash_max = node->hash_max; -+ -+ if (!hash_max) { -+ hash_max = page_hash_max(page, hash); -+ node->hash_max = hash_max; -+ } -+} -+ -+static inline -+struct stable_node *new_stable_node(struct tree_node *tree_node, -+ struct page *kpage, u32 hash_max) -+{ -+ struct stable_node *new_stable_node; -+ -+ new_stable_node = alloc_stable_node(); -+ if (!new_stable_node) -+ return NULL; -+ -+ new_stable_node->kpfn = page_to_pfn(kpage); -+ new_stable_node->hash_max = hash_max; -+ new_stable_node->tree_node = tree_node; -+ set_page_stable_node(kpage, new_stable_node); -+ -+ return new_stable_node; -+} -+ -+static inline -+struct stable_node *first_level_insert(struct tree_node *tree_node, -+ struct rmap_item *rmap_item, -+ struct rmap_item *tree_rmap_item, -+ struct page **kpage, u32 hash, -+ int *success1, int *success2) -+{ -+ int cmp; -+ struct page *tree_page; -+ u32 hash_max = 0; -+ struct stable_node *stable_node, *new_snode; -+ struct rb_node *parent = NULL, **new; -+ -+ /* this tree node contains no sub-tree yet */ -+ stable_node = rb_entry(tree_node->sub_root.rb_node, -+ struct stable_node, node); -+ -+ tree_page = get_uksm_page(stable_node, 1, 0); -+ if (tree_page) { -+ cmp = memcmp_pages(*kpage, tree_page, 1); -+ if (!cmp) { -+ try_merge_with_stable(rmap_item, tree_rmap_item, kpage, -+ tree_page, success1, success2); -+ put_page(tree_page); -+ if (!*success1 && !*success2) -+ goto failed; -+ -+ return stable_node; -+ -+ } else { -+ /* -+ * collision in first level try to create a subtree. -+ * A new node need to be created. -+ */ -+ put_page(tree_page); -+ -+ stable_node_hash_max(stable_node, tree_page, -+ tree_node->hash); -+ hash_max = rmap_item_hash_max(rmap_item, hash); -+ cmp = hash_cmp(hash_max, stable_node->hash_max); -+ -+ parent = &stable_node->node; -+ if (cmp < 0) -+ new = &parent->rb_left; -+ else if (cmp > 0) -+ new = &parent->rb_right; -+ else -+ goto failed; -+ } -+ -+ } else { -+ /* the only stable_node deleted, we reuse its tree_node. -+ */ -+ parent = NULL; -+ new = &tree_node->sub_root.rb_node; -+ } -+ -+ new_snode = new_stable_node(tree_node, *kpage, hash_max); -+ if (!new_snode) -+ goto failed; -+ -+ rb_link_node(&new_snode->node, parent, new); -+ rb_insert_color(&new_snode->node, &tree_node->sub_root); -+ tree_node->count++; -+ *success1 = *success2 = 1; -+ -+ return new_snode; -+ -+failed: -+ return NULL; -+} -+ -+static inline -+struct stable_node *stable_subtree_insert(struct tree_node *tree_node, -+ struct rmap_item *rmap_item, -+ struct rmap_item *tree_rmap_item, -+ struct page **kpage, u32 hash, -+ int *success1, int *success2) -+{ -+ struct page *tree_page; -+ u32 hash_max; -+ struct stable_node *stable_node, *new_snode; -+ struct rb_node *parent, **new; -+ -+research: -+ parent = NULL; -+ new = &tree_node->sub_root.rb_node; -+ BUG_ON(!*new); -+ hash_max = rmap_item_hash_max(rmap_item, hash); -+ while (*new) { -+ int cmp; -+ -+ stable_node = rb_entry(*new, struct stable_node, node); -+ -+ cmp = hash_cmp(hash_max, stable_node->hash_max); -+ -+ if (cmp < 0) { -+ parent = *new; -+ new = &parent->rb_left; -+ } else if (cmp > 0) { -+ parent = *new; -+ new = &parent->rb_right; -+ } else { -+ tree_page = get_uksm_page(stable_node, 1, 0); -+ if (tree_page) { -+ cmp = memcmp_pages(*kpage, tree_page, 1); -+ if (!cmp) { -+ try_merge_with_stable(rmap_item, -+ tree_rmap_item, kpage, -+ tree_page, success1, success2); -+ -+ put_page(tree_page); -+ if (!*success1 && !*success2) -+ goto failed; -+ /* -+ * successfully merged with a stable -+ * node -+ */ -+ return stable_node; -+ } else { -+ put_page(tree_page); -+ goto failed; -+ } -+ } else { -+ /* -+ * stable node may be deleted, -+ * and subtree maybe -+ * restructed, cannot -+ * continue, research it. -+ */ -+ if (tree_node->count) { -+ goto research; -+ } else { -+ /* reuse the tree node*/ -+ parent = NULL; -+ new = &tree_node->sub_root.rb_node; -+ } -+ } -+ } -+ } -+ -+ new_snode = new_stable_node(tree_node, *kpage, hash_max); -+ if (!new_snode) -+ goto failed; -+ -+ rb_link_node(&new_snode->node, parent, new); -+ rb_insert_color(&new_snode->node, &tree_node->sub_root); -+ tree_node->count++; -+ *success1 = *success2 = 1; -+ -+ return new_snode; -+ -+failed: -+ return NULL; -+} -+ -+ -+/** -+ * stable_tree_insert() - try to insert a merged page in unstable tree to -+ * the stable tree -+ * -+ * @kpage: the page need to be inserted -+ * @hash: the current hash of this page -+ * @rmap_item: the rmap_item being scanned -+ * @tree_rmap_item: the rmap_item found on unstable tree -+ * @success1: return if rmap_item is merged -+ * @success2: return if tree_rmap_item is merged -+ * -+ * @return the stable_node on stable tree if at least one -+ * rmap_item is inserted into stable tree, NULL -+ * otherwise. -+ */ -+static struct stable_node * -+stable_tree_insert(struct page **kpage, u32 hash, -+ struct rmap_item *rmap_item, -+ struct rmap_item *tree_rmap_item, -+ int *success1, int *success2) -+{ -+ struct rb_node **new = &root_stable_treep->rb_node; -+ struct rb_node *parent = NULL; -+ struct stable_node *stable_node; -+ struct tree_node *tree_node; -+ u32 hash_max = 0; -+ -+ *success1 = *success2 = 0; -+ -+ while (*new) { -+ int cmp; -+ -+ tree_node = rb_entry(*new, struct tree_node, node); -+ -+ cmp = hash_cmp(hash, tree_node->hash); -+ -+ if (cmp < 0) { -+ parent = *new; -+ new = &parent->rb_left; -+ } else if (cmp > 0) { -+ parent = *new; -+ new = &parent->rb_right; -+ } else -+ break; -+ } -+ -+ if (*new) { -+ if (tree_node->count == 1) { -+ stable_node = first_level_insert(tree_node, rmap_item, -+ tree_rmap_item, kpage, -+ hash, success1, success2); -+ } else { -+ stable_node = stable_subtree_insert(tree_node, -+ rmap_item, tree_rmap_item, kpage, -+ hash, success1, success2); -+ } -+ } else { -+ -+ /* no tree node found */ -+ tree_node = alloc_tree_node(stable_tree_node_listp); -+ if (!tree_node) { -+ stable_node = NULL; -+ goto out; -+ } -+ -+ stable_node = new_stable_node(tree_node, *kpage, hash_max); -+ if (!stable_node) { -+ free_tree_node(tree_node); -+ goto out; -+ } -+ -+ tree_node->hash = hash; -+ rb_link_node(&tree_node->node, parent, new); -+ rb_insert_color(&tree_node->node, root_stable_treep); -+ parent = NULL; -+ new = &tree_node->sub_root.rb_node; -+ -+ rb_link_node(&stable_node->node, parent, new); -+ rb_insert_color(&stable_node->node, &tree_node->sub_root); -+ tree_node->count++; -+ *success1 = *success2 = 1; -+ } -+ -+out: -+ return stable_node; -+} -+ -+ -+/** -+ * get_tree_rmap_item_page() - try to get the page and lock the mmap_sem -+ * -+ * @return 0 on success, -EBUSY if unable to lock the mmap_sem, -+ * -EINVAL if the page mapping has been changed. -+ */ -+static inline int get_tree_rmap_item_page(struct rmap_item *tree_rmap_item) -+{ -+ int err; -+ -+ err = get_mergeable_page_lock_mmap(tree_rmap_item); -+ -+ if (err == -EINVAL) { -+ /* its page map has been changed, remove it */ -+ remove_rmap_item_from_tree(tree_rmap_item); -+ } -+ -+ /* The page is gotten and mmap_sem is locked now. */ -+ return err; -+} -+ -+ -+/** -+ * unstable_tree_search_insert() - search an unstable tree rmap_item with the -+ * same hash value. Get its page and trylock the mmap_sem -+ */ -+static inline -+struct rmap_item *unstable_tree_search_insert(struct rmap_item *rmap_item, -+ u32 hash) -+ -+{ -+ struct rb_node **new = &root_unstable_tree.rb_node; -+ struct rb_node *parent = NULL; -+ struct tree_node *tree_node; -+ u32 hash_max; -+ struct rmap_item *tree_rmap_item; -+ -+ while (*new) { -+ int cmp; -+ -+ tree_node = rb_entry(*new, struct tree_node, node); -+ -+ cmp = hash_cmp(hash, tree_node->hash); -+ -+ if (cmp < 0) { -+ parent = *new; -+ new = &parent->rb_left; -+ } else if (cmp > 0) { -+ parent = *new; -+ new = &parent->rb_right; -+ } else -+ break; -+ } -+ -+ if (*new) { -+ /* got the tree_node */ -+ if (tree_node->count == 1) { -+ tree_rmap_item = rb_entry(tree_node->sub_root.rb_node, -+ struct rmap_item, node); -+ BUG_ON(!tree_rmap_item); -+ -+ goto get_page_out; -+ } -+ -+ /* well, search the collision subtree */ -+ new = &tree_node->sub_root.rb_node; -+ BUG_ON(!*new); -+ hash_max = rmap_item_hash_max(rmap_item, hash); -+ -+ while (*new) { -+ int cmp; -+ -+ tree_rmap_item = rb_entry(*new, struct rmap_item, -+ node); -+ -+ cmp = hash_cmp(hash_max, tree_rmap_item->hash_max); -+ parent = *new; -+ if (cmp < 0) -+ new = &parent->rb_left; -+ else if (cmp > 0) -+ new = &parent->rb_right; -+ else -+ goto get_page_out; -+ } -+ } else { -+ /* alloc a new tree_node */ -+ tree_node = alloc_tree_node(&unstable_tree_node_list); -+ if (!tree_node) -+ return NULL; -+ -+ tree_node->hash = hash; -+ rb_link_node(&tree_node->node, parent, new); -+ rb_insert_color(&tree_node->node, &root_unstable_tree); -+ parent = NULL; -+ new = &tree_node->sub_root.rb_node; -+ } -+ -+ /* did not found even in sub-tree */ -+ rmap_item->tree_node = tree_node; -+ rmap_item->address |= UNSTABLE_FLAG; -+ rmap_item->hash_round = uksm_hash_round; -+ rb_link_node(&rmap_item->node, parent, new); -+ rb_insert_color(&rmap_item->node, &tree_node->sub_root); -+ -+ uksm_pages_unshared++; -+ return NULL; -+ -+get_page_out: -+ if (tree_rmap_item->page == rmap_item->page) -+ return NULL; -+ -+ if (get_tree_rmap_item_page(tree_rmap_item)) -+ return NULL; -+ -+ return tree_rmap_item; -+} -+ -+static void hold_anon_vma(struct rmap_item *rmap_item, -+ struct anon_vma *anon_vma) -+{ -+ rmap_item->anon_vma = anon_vma; -+ get_anon_vma(anon_vma); -+} -+ -+ -+/** -+ * stable_tree_append() - append a rmap_item to a stable node. Deduplication -+ * ratio statistics is done in this function. -+ * -+ */ -+static void stable_tree_append(struct rmap_item *rmap_item, -+ struct stable_node *stable_node, int logdedup) -+{ -+ struct node_vma *node_vma = NULL, *new_node_vma, *node_vma_cont = NULL; -+ unsigned long key = (unsigned long)rmap_item->slot; -+ unsigned long factor = rmap_item->slot->rung->step; -+ -+ BUG_ON(!stable_node); -+ rmap_item->address |= STABLE_FLAG; -+ -+ if (hlist_empty(&stable_node->hlist)) { -+ uksm_pages_shared++; -+ goto node_vma_new; -+ } else { -+ uksm_pages_sharing++; -+ } -+ -+ hlist_for_each_entry(node_vma, &stable_node->hlist, hlist) { -+ if (node_vma->key >= key) -+ break; -+ -+ if (logdedup) { -+ node_vma->slot->pages_bemerged += factor; -+ if (list_empty(&node_vma->slot->dedup_list)) -+ list_add(&node_vma->slot->dedup_list, -+ &vma_slot_dedup); -+ } -+ } -+ -+ if (node_vma) { -+ if (node_vma->key == key) { -+ node_vma_cont = hlist_entry_safe(node_vma->hlist.next, struct node_vma, hlist); -+ goto node_vma_ok; -+ } else if (node_vma->key > key) { -+ node_vma_cont = node_vma; -+ } -+ } -+ -+node_vma_new: -+ /* no same vma already in node, alloc a new node_vma */ -+ new_node_vma = alloc_node_vma(); -+ BUG_ON(!new_node_vma); -+ new_node_vma->head = stable_node; -+ new_node_vma->slot = rmap_item->slot; -+ -+ if (!node_vma) { -+ hlist_add_head(&new_node_vma->hlist, &stable_node->hlist); -+ } else if (node_vma->key != key) { -+ if (node_vma->key < key) -+ hlist_add_behind(&new_node_vma->hlist, &node_vma->hlist); -+ else { -+ hlist_add_before(&new_node_vma->hlist, -+ &node_vma->hlist); -+ } -+ -+ } -+ node_vma = new_node_vma; -+ -+node_vma_ok: /* ok, ready to add to the list */ -+ rmap_item->head = node_vma; -+ hlist_add_head(&rmap_item->hlist, &node_vma->rmap_hlist); -+ hold_anon_vma(rmap_item, rmap_item->slot->vma->anon_vma); -+ if (logdedup) { -+ rmap_item->slot->pages_merged++; -+ if (node_vma_cont) { -+ node_vma = node_vma_cont; -+ hlist_for_each_entry_continue(node_vma, hlist) { -+ node_vma->slot->pages_bemerged += factor; -+ if (list_empty(&node_vma->slot->dedup_list)) -+ list_add(&node_vma->slot->dedup_list, -+ &vma_slot_dedup); -+ } -+ } -+ } -+} -+ -+/* -+ * We use break_ksm to break COW on a ksm page: it's a stripped down -+ * -+ * if (get_user_pages(addr, 1, 1, 1, &page, NULL) == 1) -+ * put_page(page); -+ * -+ * but taking great care only to touch a ksm page, in a VM_MERGEABLE vma, -+ * in case the application has unmapped and remapped mm,addr meanwhile. -+ * Could a ksm page appear anywhere else? Actually yes, in a VM_PFNMAP -+ * mmap of /dev/mem or /dev/kmem, where we would not want to touch it. -+ */ -+static int break_ksm(struct vm_area_struct *vma, unsigned long addr) -+{ -+ struct page *page; -+ int ret = 0; -+ -+ do { -+ cond_resched(); -+ page = follow_page(vma, addr, FOLL_GET | FOLL_MIGRATION | FOLL_REMOTE); -+ if (IS_ERR_OR_NULL(page)) -+ break; -+ if (PageKsm(page)) { -+ ret = handle_mm_fault(vma, addr, -+ FAULT_FLAG_WRITE | FAULT_FLAG_REMOTE); -+ } else -+ ret = VM_FAULT_WRITE; -+ put_page(page); -+ } while (!(ret & (VM_FAULT_WRITE | VM_FAULT_SIGBUS | VM_FAULT_SIGSEGV | VM_FAULT_OOM))); -+ /* -+ * We must loop because handle_mm_fault() may back out if there's -+ * any difficulty e.g. if pte accessed bit gets updated concurrently. -+ * -+ * VM_FAULT_WRITE is what we have been hoping for: it indicates that -+ * COW has been broken, even if the vma does not permit VM_WRITE; -+ * but note that a concurrent fault might break PageKsm for us. -+ * -+ * VM_FAULT_SIGBUS could occur if we race with truncation of the -+ * backing file, which also invalidates anonymous pages: that's -+ * okay, that truncation will have unmapped the PageKsm for us. -+ * -+ * VM_FAULT_OOM: at the time of writing (late July 2009), setting -+ * aside mem_cgroup limits, VM_FAULT_OOM would only be set if the -+ * current task has TIF_MEMDIE set, and will be OOM killed on return -+ * to user; and ksmd, having no mm, would never be chosen for that. -+ * -+ * But if the mm is in a limited mem_cgroup, then the fault may fail -+ * with VM_FAULT_OOM even if the current task is not TIF_MEMDIE; and -+ * even ksmd can fail in this way - though it's usually breaking ksm -+ * just to undo a merge it made a moment before, so unlikely to oom. -+ * -+ * That's a pity: we might therefore have more kernel pages allocated -+ * than we're counting as nodes in the stable tree; but uksm_do_scan -+ * will retry to break_cow on each pass, so should recover the page -+ * in due course. The important thing is to not let VM_MERGEABLE -+ * be cleared while any such pages might remain in the area. -+ */ -+ return (ret & VM_FAULT_OOM) ? -ENOMEM : 0; -+} -+ -+static void break_cow(struct rmap_item *rmap_item) -+{ -+ struct vm_area_struct *vma = rmap_item->slot->vma; -+ struct mm_struct *mm = vma->vm_mm; -+ unsigned long addr = get_rmap_addr(rmap_item); -+ -+ if (uksm_test_exit(mm)) -+ goto out; -+ -+ break_ksm(vma, addr); -+out: -+ return; -+} -+ -+/* -+ * Though it's very tempting to unmerge in_stable_tree(rmap_item)s rather -+ * than check every pte of a given vma, the locking doesn't quite work for -+ * that - an rmap_item is assigned to the stable tree after inserting ksm -+ * page and upping mmap_sem. Nor does it fit with the way we skip dup'ing -+ * rmap_items from parent to child at fork time (so as not to waste time -+ * if exit comes before the next scan reaches it). -+ * -+ * Similarly, although we'd like to remove rmap_items (so updating counts -+ * and freeing memory) when unmerging an area, it's easier to leave that -+ * to the next pass of ksmd - consider, for example, how ksmd might be -+ * in cmp_and_merge_page on one of the rmap_items we would be removing. -+ */ -+inline int unmerge_uksm_pages(struct vm_area_struct *vma, -+ unsigned long start, unsigned long end) -+{ -+ unsigned long addr; -+ int err = 0; -+ -+ for (addr = start; addr < end && !err; addr += PAGE_SIZE) { -+ if (uksm_test_exit(vma->vm_mm)) -+ break; -+ if (signal_pending(current)) -+ err = -ERESTARTSYS; -+ else -+ err = break_ksm(vma, addr); -+ } -+ return err; -+} -+ -+static inline void inc_uksm_pages_scanned(void) -+{ -+ u64 delta; -+ -+ -+ if (uksm_pages_scanned == U64_MAX) { -+ encode_benefit(); -+ -+ delta = uksm_pages_scanned >> pages_scanned_base; -+ -+ if (CAN_OVERFLOW_U64(pages_scanned_stored, delta)) { -+ pages_scanned_stored >>= 1; -+ delta >>= 1; -+ pages_scanned_base++; -+ } -+ -+ pages_scanned_stored += delta; -+ -+ uksm_pages_scanned = uksm_pages_scanned_last = 0; -+ } -+ -+ uksm_pages_scanned++; -+} -+ -+static inline int find_zero_page_hash(int strength, u32 hash) -+{ -+ return (zero_hash_table[strength] == hash); -+} -+ -+static -+int cmp_and_merge_zero_page(struct vm_area_struct *vma, struct page *page) -+{ -+ struct page *zero_page = empty_uksm_zero_page; -+ struct mm_struct *mm = vma->vm_mm; -+ pte_t orig_pte = __pte(0); -+ int err = -EFAULT; -+ -+ if (uksm_test_exit(mm)) -+ goto out; -+ -+ if (!trylock_page(page)) -+ goto out; -+ -+ if (!PageAnon(page)) -+ goto out_unlock; -+ -+ if (PageTransCompound(page)) { -+ err = split_huge_page(page); -+ if (err) -+ goto out_unlock; -+ } -+ -+ if (write_protect_page(vma, page, &orig_pte, 0) == 0) { -+ if (is_page_full_zero(page)) -+ err = replace_page(vma, page, zero_page, orig_pte); -+ } -+ -+out_unlock: -+ unlock_page(page); -+out: -+ return err; -+} -+ -+/* -+ * cmp_and_merge_page() - first see if page can be merged into the stable -+ * tree; if not, compare hash to previous and if it's the same, see if page -+ * can be inserted into the unstable tree, or merged with a page already there -+ * and both transferred to the stable tree. -+ * -+ * @page: the page that we are searching identical page to. -+ * @rmap_item: the reverse mapping into the virtual address of this page -+ */ -+static void cmp_and_merge_page(struct rmap_item *rmap_item, u32 hash) -+{ -+ struct rmap_item *tree_rmap_item; -+ struct page *page; -+ struct page *kpage = NULL; -+ u32 hash_max; -+ int err; -+ unsigned int success1, success2; -+ struct stable_node *snode; -+ int cmp; -+ struct rb_node *parent = NULL, **new; -+ -+ remove_rmap_item_from_tree(rmap_item); -+ page = rmap_item->page; -+ -+ /* We first start with searching the page inside the stable tree */ -+ kpage = stable_tree_search(rmap_item, hash); -+ if (kpage) { -+ err = try_to_merge_with_uksm_page(rmap_item, kpage, -+ hash); -+ if (!err) { -+ /* -+ * The page was successfully merged, add -+ * its rmap_item to the stable tree. -+ * page lock is needed because it's -+ * racing with try_to_unmap_ksm(), etc. -+ */ -+ lock_page(kpage); -+ snode = page_stable_node(kpage); -+ stable_tree_append(rmap_item, snode, 1); -+ unlock_page(kpage); -+ put_page(kpage); -+ return; /* success */ -+ } -+ put_page(kpage); -+ -+ /* -+ * if it's a collision and it has been search in sub-rbtree -+ * (hash_max != 0), we want to abort, because if it is -+ * successfully merged in unstable tree, the collision trends to -+ * happen again. -+ */ -+ if (err == MERGE_ERR_COLLI && rmap_item->hash_max) -+ return; -+ } -+ -+ tree_rmap_item = -+ unstable_tree_search_insert(rmap_item, hash); -+ if (tree_rmap_item) { -+ err = try_to_merge_two_pages(rmap_item, tree_rmap_item, hash); -+ /* -+ * As soon as we merge this page, we want to remove the -+ * rmap_item of the page we have merged with from the unstable -+ * tree, and insert it instead as new node in the stable tree. -+ */ -+ if (!err) { -+ kpage = page; -+ remove_rmap_item_from_tree(tree_rmap_item); -+ lock_page(kpage); -+ snode = stable_tree_insert(&kpage, hash, -+ rmap_item, tree_rmap_item, -+ &success1, &success2); -+ -+ /* -+ * Do not log dedup for tree item, it's not counted as -+ * scanned in this round. -+ */ -+ if (success2) -+ stable_tree_append(tree_rmap_item, snode, 0); -+ -+ /* -+ * The order of these two stable append is important: -+ * we are scanning rmap_item. -+ */ -+ if (success1) -+ stable_tree_append(rmap_item, snode, 1); -+ -+ /* -+ * The original kpage may be unlocked inside -+ * stable_tree_insert() already. This page -+ * should be unlocked before doing -+ * break_cow(). -+ */ -+ unlock_page(kpage); -+ -+ if (!success1) -+ break_cow(rmap_item); -+ -+ if (!success2) -+ break_cow(tree_rmap_item); -+ -+ } else if (err == MERGE_ERR_COLLI) { -+ BUG_ON(tree_rmap_item->tree_node->count > 1); -+ -+ rmap_item_hash_max(tree_rmap_item, -+ tree_rmap_item->tree_node->hash); -+ -+ hash_max = rmap_item_hash_max(rmap_item, hash); -+ cmp = hash_cmp(hash_max, tree_rmap_item->hash_max); -+ parent = &tree_rmap_item->node; -+ if (cmp < 0) -+ new = &parent->rb_left; -+ else if (cmp > 0) -+ new = &parent->rb_right; -+ else -+ goto put_up_out; -+ -+ rmap_item->tree_node = tree_rmap_item->tree_node; -+ rmap_item->address |= UNSTABLE_FLAG; -+ rmap_item->hash_round = uksm_hash_round; -+ rb_link_node(&rmap_item->node, parent, new); -+ rb_insert_color(&rmap_item->node, -+ &tree_rmap_item->tree_node->sub_root); -+ rmap_item->tree_node->count++; -+ } else { -+ /* -+ * either one of the page has changed or they collide -+ * at the max hash, we consider them as ill items. -+ */ -+ remove_rmap_item_from_tree(tree_rmap_item); -+ } -+put_up_out: -+ put_page(tree_rmap_item->page); -+ up_read(&tree_rmap_item->slot->vma->vm_mm->mmap_sem); -+ } -+} -+ -+ -+ -+ -+static inline unsigned long get_pool_index(struct vma_slot *slot, -+ unsigned long index) -+{ -+ unsigned long pool_index; -+ -+ pool_index = (sizeof(struct rmap_list_entry *) * index) >> PAGE_SHIFT; -+ if (pool_index >= slot->pool_size) -+ BUG(); -+ return pool_index; -+} -+ -+static inline unsigned long index_page_offset(unsigned long index) -+{ -+ return offset_in_page(sizeof(struct rmap_list_entry *) * index); -+} -+ -+static inline -+struct rmap_list_entry *get_rmap_list_entry(struct vma_slot *slot, -+ unsigned long index, int need_alloc) -+{ -+ unsigned long pool_index; -+ struct page *page; -+ void *addr; -+ -+ -+ pool_index = get_pool_index(slot, index); -+ if (!slot->rmap_list_pool[pool_index]) { -+ if (!need_alloc) -+ return NULL; -+ -+ page = alloc_page(GFP_KERNEL | __GFP_ZERO | __GFP_NOWARN); -+ if (!page) -+ return NULL; -+ -+ slot->rmap_list_pool[pool_index] = page; -+ } -+ -+ addr = kmap(slot->rmap_list_pool[pool_index]); -+ addr += index_page_offset(index); -+ -+ return addr; -+} -+ -+static inline void put_rmap_list_entry(struct vma_slot *slot, -+ unsigned long index) -+{ -+ unsigned long pool_index; -+ -+ pool_index = get_pool_index(slot, index); -+ BUG_ON(!slot->rmap_list_pool[pool_index]); -+ kunmap(slot->rmap_list_pool[pool_index]); -+} -+ -+static inline int entry_is_new(struct rmap_list_entry *entry) -+{ -+ return !entry->item; -+} -+ -+static inline unsigned long get_index_orig_addr(struct vma_slot *slot, -+ unsigned long index) -+{ -+ return slot->vma->vm_start + (index << PAGE_SHIFT); -+} -+ -+static inline unsigned long get_entry_address(struct rmap_list_entry *entry) -+{ -+ unsigned long addr; -+ -+ if (is_addr(entry->addr)) -+ addr = get_clean_addr(entry->addr); -+ else if (entry->item) -+ addr = get_rmap_addr(entry->item); -+ else -+ BUG(); -+ -+ return addr; -+} -+ -+static inline struct rmap_item *get_entry_item(struct rmap_list_entry *entry) -+{ -+ if (is_addr(entry->addr)) -+ return NULL; -+ -+ return entry->item; -+} -+ -+static inline void inc_rmap_list_pool_count(struct vma_slot *slot, -+ unsigned long index) -+{ -+ unsigned long pool_index; -+ -+ pool_index = get_pool_index(slot, index); -+ BUG_ON(!slot->rmap_list_pool[pool_index]); -+ slot->pool_counts[pool_index]++; -+} -+ -+static inline void dec_rmap_list_pool_count(struct vma_slot *slot, -+ unsigned long index) -+{ -+ unsigned long pool_index; -+ -+ pool_index = get_pool_index(slot, index); -+ BUG_ON(!slot->rmap_list_pool[pool_index]); -+ BUG_ON(!slot->pool_counts[pool_index]); -+ slot->pool_counts[pool_index]--; -+} -+ -+static inline int entry_has_rmap(struct rmap_list_entry *entry) -+{ -+ return !is_addr(entry->addr) && entry->item; -+} -+ -+static inline void swap_entries(struct rmap_list_entry *entry1, -+ unsigned long index1, -+ struct rmap_list_entry *entry2, -+ unsigned long index2) -+{ -+ struct rmap_list_entry tmp; -+ -+ /* swapping two new entries is meaningless */ -+ BUG_ON(entry_is_new(entry1) && entry_is_new(entry2)); -+ -+ tmp = *entry1; -+ *entry1 = *entry2; -+ *entry2 = tmp; -+ -+ if (entry_has_rmap(entry1)) -+ entry1->item->entry_index = index1; -+ -+ if (entry_has_rmap(entry2)) -+ entry2->item->entry_index = index2; -+ -+ if (entry_has_rmap(entry1) && !entry_has_rmap(entry2)) { -+ inc_rmap_list_pool_count(entry1->item->slot, index1); -+ dec_rmap_list_pool_count(entry1->item->slot, index2); -+ } else if (!entry_has_rmap(entry1) && entry_has_rmap(entry2)) { -+ inc_rmap_list_pool_count(entry2->item->slot, index2); -+ dec_rmap_list_pool_count(entry2->item->slot, index1); -+ } -+} -+ -+static inline void free_entry_item(struct rmap_list_entry *entry) -+{ -+ unsigned long index; -+ struct rmap_item *item; -+ -+ if (!is_addr(entry->addr)) { -+ BUG_ON(!entry->item); -+ item = entry->item; -+ entry->addr = get_rmap_addr(item); -+ set_is_addr(entry->addr); -+ index = item->entry_index; -+ remove_rmap_item_from_tree(item); -+ dec_rmap_list_pool_count(item->slot, index); -+ free_rmap_item(item); -+ } -+} -+ -+static inline int pool_entry_boundary(unsigned long index) -+{ -+ unsigned long linear_addr; -+ -+ linear_addr = sizeof(struct rmap_list_entry *) * index; -+ return index && !offset_in_page(linear_addr); -+} -+ -+static inline void try_free_last_pool(struct vma_slot *slot, -+ unsigned long index) -+{ -+ unsigned long pool_index; -+ -+ pool_index = get_pool_index(slot, index); -+ if (slot->rmap_list_pool[pool_index] && -+ !slot->pool_counts[pool_index]) { -+ __free_page(slot->rmap_list_pool[pool_index]); -+ slot->rmap_list_pool[pool_index] = NULL; -+ slot->flags |= UKSM_SLOT_NEED_SORT; -+ } -+ -+} -+ -+static inline unsigned long vma_item_index(struct vm_area_struct *vma, -+ struct rmap_item *item) -+{ -+ return (get_rmap_addr(item) - vma->vm_start) >> PAGE_SHIFT; -+} -+ -+static int within_same_pool(struct vma_slot *slot, -+ unsigned long i, unsigned long j) -+{ -+ unsigned long pool_i, pool_j; -+ -+ pool_i = get_pool_index(slot, i); -+ pool_j = get_pool_index(slot, j); -+ -+ return (pool_i == pool_j); -+} -+ -+static void sort_rmap_entry_list(struct vma_slot *slot) -+{ -+ unsigned long i, j; -+ struct rmap_list_entry *entry, *swap_entry; -+ -+ entry = get_rmap_list_entry(slot, 0, 0); -+ for (i = 0; i < slot->pages; ) { -+ -+ if (!entry) -+ goto skip_whole_pool; -+ -+ if (entry_is_new(entry)) -+ goto next_entry; -+ -+ if (is_addr(entry->addr)) { -+ entry->addr = 0; -+ goto next_entry; -+ } -+ -+ j = vma_item_index(slot->vma, entry->item); -+ if (j == i) -+ goto next_entry; -+ -+ if (within_same_pool(slot, i, j)) -+ swap_entry = entry + j - i; -+ else -+ swap_entry = get_rmap_list_entry(slot, j, 1); -+ -+ swap_entries(entry, i, swap_entry, j); -+ if (!within_same_pool(slot, i, j)) -+ put_rmap_list_entry(slot, j); -+ continue; -+ -+skip_whole_pool: -+ i += PAGE_SIZE / sizeof(*entry); -+ if (i < slot->pages) -+ entry = get_rmap_list_entry(slot, i, 0); -+ continue; -+ -+next_entry: -+ if (i >= slot->pages - 1 || -+ !within_same_pool(slot, i, i + 1)) { -+ put_rmap_list_entry(slot, i); -+ if (i + 1 < slot->pages) -+ entry = get_rmap_list_entry(slot, i + 1, 0); -+ } else -+ entry++; -+ i++; -+ continue; -+ } -+ -+ /* free empty pool entries which contain no rmap_item */ -+ /* CAN be simplied to based on only pool_counts when bug freed !!!!! */ -+ for (i = 0; i < slot->pool_size; i++) { -+ unsigned char has_rmap; -+ void *addr; -+ -+ if (!slot->rmap_list_pool[i]) -+ continue; -+ -+ has_rmap = 0; -+ addr = kmap(slot->rmap_list_pool[i]); -+ BUG_ON(!addr); -+ for (j = 0; j < PAGE_SIZE / sizeof(*entry); j++) { -+ entry = (struct rmap_list_entry *)addr + j; -+ if (is_addr(entry->addr)) -+ continue; -+ if (!entry->item) -+ continue; -+ has_rmap = 1; -+ } -+ kunmap(slot->rmap_list_pool[i]); -+ if (!has_rmap) { -+ BUG_ON(slot->pool_counts[i]); -+ __free_page(slot->rmap_list_pool[i]); -+ slot->rmap_list_pool[i] = NULL; -+ } -+ } -+ -+ slot->flags &= ~UKSM_SLOT_NEED_SORT; -+} -+ -+/* -+ * vma_fully_scanned() - if all the pages in this slot have been scanned. -+ */ -+static inline int vma_fully_scanned(struct vma_slot *slot) -+{ -+ return slot->pages_scanned == slot->pages; -+} -+ -+/** -+ * get_next_rmap_item() - Get the next rmap_item in a vma_slot according to -+ * its random permutation. This function is embedded with the random -+ * permutation index management code. -+ */ -+static struct rmap_item *get_next_rmap_item(struct vma_slot *slot, u32 *hash) -+{ -+ unsigned long rand_range, addr, swap_index, scan_index; -+ struct rmap_item *item = NULL; -+ struct rmap_list_entry *scan_entry, *swap_entry = NULL; -+ struct page *page; -+ -+ scan_index = swap_index = slot->pages_scanned % slot->pages; -+ -+ if (pool_entry_boundary(scan_index)) -+ try_free_last_pool(slot, scan_index - 1); -+ -+ if (vma_fully_scanned(slot)) { -+ if (slot->flags & UKSM_SLOT_NEED_SORT) -+ slot->flags |= UKSM_SLOT_NEED_RERAND; -+ else -+ slot->flags &= ~UKSM_SLOT_NEED_RERAND; -+ if (slot->flags & UKSM_SLOT_NEED_SORT) -+ sort_rmap_entry_list(slot); -+ } -+ -+ scan_entry = get_rmap_list_entry(slot, scan_index, 1); -+ if (!scan_entry) -+ return NULL; -+ -+ if (entry_is_new(scan_entry)) { -+ scan_entry->addr = get_index_orig_addr(slot, scan_index); -+ set_is_addr(scan_entry->addr); -+ } -+ -+ if (slot->flags & UKSM_SLOT_NEED_RERAND) { -+ rand_range = slot->pages - scan_index; -+ BUG_ON(!rand_range); -+ swap_index = scan_index + (prandom_u32() % rand_range); -+ } -+ -+ if (swap_index != scan_index) { -+ swap_entry = get_rmap_list_entry(slot, swap_index, 1); -+ if (entry_is_new(swap_entry)) { -+ swap_entry->addr = get_index_orig_addr(slot, -+ swap_index); -+ set_is_addr(swap_entry->addr); -+ } -+ swap_entries(scan_entry, scan_index, swap_entry, swap_index); -+ } -+ -+ addr = get_entry_address(scan_entry); -+ item = get_entry_item(scan_entry); -+ BUG_ON(addr > slot->vma->vm_end || addr < slot->vma->vm_start); -+ -+ page = follow_page(slot->vma, addr, FOLL_GET); -+ if (IS_ERR_OR_NULL(page)) -+ goto nopage; -+ -+ if (!PageAnon(page)) -+ goto putpage; -+ -+ /*check is zero_page pfn or uksm_zero_page*/ -+ if ((page_to_pfn(page) == zero_pfn) -+ || (page_to_pfn(page) == uksm_zero_pfn)) -+ goto putpage; -+ -+ flush_anon_page(slot->vma, page, addr); -+ flush_dcache_page(page); -+ -+ -+ *hash = page_hash(page, hash_strength, 1); -+ inc_uksm_pages_scanned(); -+ /*if the page content all zero, re-map to zero-page*/ -+ if (find_zero_page_hash(hash_strength, *hash)) { -+ if (!cmp_and_merge_zero_page(slot->vma, page)) { -+ slot->pages_merged++; -+ -+ /* For full-zero pages, no need to create rmap item */ -+ goto putpage; -+ } else { -+ inc_rshash_neg(memcmp_cost / 2); -+ } -+ } -+ -+ if (!item) { -+ item = alloc_rmap_item(); -+ if (item) { -+ /* It has already been zeroed */ -+ item->slot = slot; -+ item->address = addr; -+ item->entry_index = scan_index; -+ scan_entry->item = item; -+ inc_rmap_list_pool_count(slot, scan_index); -+ } else -+ goto putpage; -+ } -+ -+ BUG_ON(item->slot != slot); -+ /* the page may have changed */ -+ item->page = page; -+ put_rmap_list_entry(slot, scan_index); -+ if (swap_entry) -+ put_rmap_list_entry(slot, swap_index); -+ return item; -+ -+putpage: -+ put_page(page); -+ page = NULL; -+nopage: -+ /* no page, store addr back and free rmap_item if possible */ -+ free_entry_item(scan_entry); -+ put_rmap_list_entry(slot, scan_index); -+ if (swap_entry) -+ put_rmap_list_entry(slot, swap_index); -+ return NULL; -+} -+ -+static inline int in_stable_tree(struct rmap_item *rmap_item) -+{ -+ return rmap_item->address & STABLE_FLAG; -+} -+ -+/** -+ * scan_vma_one_page() - scan the next page in a vma_slot. Called with -+ * mmap_sem locked. -+ */ -+static noinline void scan_vma_one_page(struct vma_slot *slot) -+{ -+ u32 hash; -+ struct mm_struct *mm; -+ struct rmap_item *rmap_item = NULL; -+ struct vm_area_struct *vma = slot->vma; -+ -+ mm = vma->vm_mm; -+ BUG_ON(!mm); -+ BUG_ON(!slot); -+ -+ rmap_item = get_next_rmap_item(slot, &hash); -+ if (!rmap_item) -+ goto out1; -+ -+ if (PageKsm(rmap_item->page) && in_stable_tree(rmap_item)) -+ goto out2; -+ -+ cmp_and_merge_page(rmap_item, hash); -+out2: -+ put_page(rmap_item->page); -+out1: -+ slot->pages_scanned++; -+ slot->this_sampled++; -+ if (slot->fully_scanned_round != fully_scanned_round) -+ scanned_virtual_pages++; -+ -+ if (vma_fully_scanned(slot)) -+ slot->fully_scanned_round = fully_scanned_round; -+} -+ -+static inline unsigned long rung_get_pages(struct scan_rung *rung) -+{ -+ struct slot_tree_node *node; -+ -+ if (!rung->vma_root.rnode) -+ return 0; -+ -+ node = container_of(rung->vma_root.rnode, struct slot_tree_node, snode); -+ -+ return node->size; -+} -+ -+#define RUNG_SAMPLED_MIN 3 -+ -+static inline -+void uksm_calc_rung_step(struct scan_rung *rung, -+ unsigned long page_time, unsigned long ratio) -+{ -+ unsigned long sampled, pages; -+ -+ /* will be fully scanned ? */ -+ if (!rung->cover_msecs) { -+ rung->step = 1; -+ return; -+ } -+ -+ sampled = rung->cover_msecs * (NSEC_PER_MSEC / TIME_RATIO_SCALE) -+ * ratio / page_time; -+ -+ /* -+ * Before we finsish a scan round and expensive per-round jobs, -+ * we need to have a chance to estimate the per page time. So -+ * the sampled number can not be too small. -+ */ -+ if (sampled < RUNG_SAMPLED_MIN) -+ sampled = RUNG_SAMPLED_MIN; -+ -+ pages = rung_get_pages(rung); -+ if (likely(pages > sampled)) -+ rung->step = pages / sampled; -+ else -+ rung->step = 1; -+} -+ -+static inline int step_need_recalc(struct scan_rung *rung) -+{ -+ unsigned long pages, stepmax; -+ -+ pages = rung_get_pages(rung); -+ stepmax = pages / RUNG_SAMPLED_MIN; -+ -+ return pages && (rung->step > pages || -+ (stepmax && rung->step > stepmax)); -+} -+ -+static inline -+void reset_current_scan(struct scan_rung *rung, int finished, int step_recalc) -+{ -+ struct vma_slot *slot; -+ -+ if (finished) -+ rung->flags |= UKSM_RUNG_ROUND_FINISHED; -+ -+ if (step_recalc || step_need_recalc(rung)) { -+ uksm_calc_rung_step(rung, uksm_ema_page_time, rung->cpu_ratio); -+ BUG_ON(step_need_recalc(rung)); -+ } -+ -+ slot_iter_index = prandom_u32() % rung->step; -+ BUG_ON(!rung->vma_root.rnode); -+ slot = sradix_tree_next(&rung->vma_root, NULL, 0, slot_iter); -+ BUG_ON(!slot); -+ -+ rung->current_scan = slot; -+ rung->current_offset = slot_iter_index; -+} -+ -+static inline struct sradix_tree_root *slot_get_root(struct vma_slot *slot) -+{ -+ return &slot->rung->vma_root; -+} -+ -+/* -+ * return if resetted. -+ */ -+static int advance_current_scan(struct scan_rung *rung) -+{ -+ unsigned short n; -+ struct vma_slot *slot, *next = NULL; -+ -+ BUG_ON(!rung->vma_root.num); -+ -+ slot = rung->current_scan; -+ n = (slot->pages - rung->current_offset) % rung->step; -+ slot_iter_index = rung->step - n; -+ next = sradix_tree_next(&rung->vma_root, slot->snode, -+ slot->sindex, slot_iter); -+ -+ if (next) { -+ rung->current_offset = slot_iter_index; -+ rung->current_scan = next; -+ return 0; -+ } else { -+ reset_current_scan(rung, 1, 0); -+ return 1; -+ } -+} -+ -+static inline void rung_rm_slot(struct vma_slot *slot) -+{ -+ struct scan_rung *rung = slot->rung; -+ struct sradix_tree_root *root; -+ -+ if (rung->current_scan == slot) -+ advance_current_scan(rung); -+ -+ root = slot_get_root(slot); -+ sradix_tree_delete_from_leaf(root, slot->snode, slot->sindex); -+ slot->snode = NULL; -+ if (step_need_recalc(rung)) { -+ uksm_calc_rung_step(rung, uksm_ema_page_time, rung->cpu_ratio); -+ BUG_ON(step_need_recalc(rung)); -+ } -+ -+ /* In case advance_current_scan loop back to this slot again */ -+ if (rung->vma_root.num && rung->current_scan == slot) -+ reset_current_scan(slot->rung, 1, 0); -+} -+ -+static inline void rung_add_new_slots(struct scan_rung *rung, -+ struct vma_slot **slots, unsigned long num) -+{ -+ int err; -+ struct vma_slot *slot; -+ unsigned long i; -+ struct sradix_tree_root *root = &rung->vma_root; -+ -+ err = sradix_tree_enter(root, (void **)slots, num); -+ BUG_ON(err); -+ -+ for (i = 0; i < num; i++) { -+ slot = slots[i]; -+ slot->rung = rung; -+ BUG_ON(vma_fully_scanned(slot)); -+ } -+ -+ if (rung->vma_root.num == num) -+ reset_current_scan(rung, 0, 1); -+} -+ -+static inline int rung_add_one_slot(struct scan_rung *rung, -+ struct vma_slot *slot) -+{ -+ int err; -+ -+ err = sradix_tree_enter(&rung->vma_root, (void **)&slot, 1); -+ if (err) -+ return err; -+ -+ slot->rung = rung; -+ if (rung->vma_root.num == 1) -+ reset_current_scan(rung, 0, 1); -+ -+ return 0; -+} -+ -+/* -+ * Return true if the slot is deleted from its rung. -+ */ -+static inline int vma_rung_enter(struct vma_slot *slot, struct scan_rung *rung) -+{ -+ struct scan_rung *old_rung = slot->rung; -+ int err; -+ -+ if (old_rung == rung) -+ return 0; -+ -+ rung_rm_slot(slot); -+ err = rung_add_one_slot(rung, slot); -+ if (err) { -+ err = rung_add_one_slot(old_rung, slot); -+ WARN_ON(err); /* OOPS, badly OOM, we lost this slot */ -+ } -+ -+ return 1; -+} -+ -+static inline int vma_rung_up(struct vma_slot *slot) -+{ -+ struct scan_rung *rung; -+ -+ rung = slot->rung; -+ if (slot->rung != &uksm_scan_ladder[SCAN_LADDER_SIZE-1]) -+ rung++; -+ -+ return vma_rung_enter(slot, rung); -+} -+ -+static inline int vma_rung_down(struct vma_slot *slot) -+{ -+ struct scan_rung *rung; -+ -+ rung = slot->rung; -+ if (slot->rung != &uksm_scan_ladder[0]) -+ rung--; -+ -+ return vma_rung_enter(slot, rung); -+} -+ -+/** -+ * cal_dedup_ratio() - Calculate the deduplication ratio for this slot. -+ */ -+static unsigned long cal_dedup_ratio(struct vma_slot *slot) -+{ -+ unsigned long ret; -+ unsigned long pages; -+ -+ pages = slot->this_sampled; -+ if (!pages) -+ return 0; -+ -+ BUG_ON(slot->pages_scanned == slot->last_scanned); -+ -+ ret = slot->pages_merged; -+ -+ /* Thrashing area filtering */ -+ if (ret && uksm_thrash_threshold) { -+ if (slot->pages_cowed * 100 / slot->pages_merged -+ > uksm_thrash_threshold) { -+ ret = 0; -+ } else { -+ ret = slot->pages_merged - slot->pages_cowed; -+ } -+ } -+ -+ return ret * 100 / pages; -+} -+ -+/** -+ * cal_dedup_ratio() - Calculate the deduplication ratio for this slot. -+ */ -+static unsigned long cal_dedup_ratio_old(struct vma_slot *slot) -+{ -+ unsigned long ret; -+ unsigned long pages; -+ -+ pages = slot->pages; -+ if (!pages) -+ return 0; -+ -+ ret = slot->pages_bemerged; -+ -+ /* Thrashing area filtering */ -+ if (ret && uksm_thrash_threshold) { -+ if (slot->pages_cowed * 100 / slot->pages_bemerged -+ > uksm_thrash_threshold) { -+ ret = 0; -+ } else { -+ ret = slot->pages_bemerged - slot->pages_cowed; -+ } -+ } -+ -+ return ret * 100 / pages; -+} -+ -+/** -+ * stable_node_reinsert() - When the hash_strength has been adjusted, the -+ * stable tree need to be restructured, this is the function re-inserting the -+ * stable node. -+ */ -+static inline void stable_node_reinsert(struct stable_node *new_node, -+ struct page *page, -+ struct rb_root *root_treep, -+ struct list_head *tree_node_listp, -+ u32 hash) -+{ -+ struct rb_node **new = &root_treep->rb_node; -+ struct rb_node *parent = NULL; -+ struct stable_node *stable_node; -+ struct tree_node *tree_node; -+ struct page *tree_page; -+ int cmp; -+ -+ while (*new) { -+ int cmp; -+ -+ tree_node = rb_entry(*new, struct tree_node, node); -+ -+ cmp = hash_cmp(hash, tree_node->hash); -+ -+ if (cmp < 0) { -+ parent = *new; -+ new = &parent->rb_left; -+ } else if (cmp > 0) { -+ parent = *new; -+ new = &parent->rb_right; -+ } else -+ break; -+ } -+ -+ if (*new) { -+ /* find a stable tree node with same first level hash value */ -+ stable_node_hash_max(new_node, page, hash); -+ if (tree_node->count == 1) { -+ stable_node = rb_entry(tree_node->sub_root.rb_node, -+ struct stable_node, node); -+ tree_page = get_uksm_page(stable_node, 1, 0); -+ if (tree_page) { -+ stable_node_hash_max(stable_node, -+ tree_page, hash); -+ put_page(tree_page); -+ -+ /* prepare for stable node insertion */ -+ -+ cmp = hash_cmp(new_node->hash_max, -+ stable_node->hash_max); -+ parent = &stable_node->node; -+ if (cmp < 0) -+ new = &parent->rb_left; -+ else if (cmp > 0) -+ new = &parent->rb_right; -+ else -+ goto failed; -+ -+ goto add_node; -+ } else { -+ /* the only stable_node deleted, the tree node -+ * was not deleted. -+ */ -+ goto tree_node_reuse; -+ } -+ } -+ -+ /* well, search the collision subtree */ -+ new = &tree_node->sub_root.rb_node; -+ parent = NULL; -+ BUG_ON(!*new); -+ while (*new) { -+ int cmp; -+ -+ stable_node = rb_entry(*new, struct stable_node, node); -+ -+ cmp = hash_cmp(new_node->hash_max, -+ stable_node->hash_max); -+ -+ if (cmp < 0) { -+ parent = *new; -+ new = &parent->rb_left; -+ } else if (cmp > 0) { -+ parent = *new; -+ new = &parent->rb_right; -+ } else { -+ /* oh, no, still a collision */ -+ goto failed; -+ } -+ } -+ -+ goto add_node; -+ } -+ -+ /* no tree node found */ -+ tree_node = alloc_tree_node(tree_node_listp); -+ if (!tree_node) { -+ pr_err("UKSM: memory allocation error!\n"); -+ goto failed; -+ } else { -+ tree_node->hash = hash; -+ rb_link_node(&tree_node->node, parent, new); -+ rb_insert_color(&tree_node->node, root_treep); -+ -+tree_node_reuse: -+ /* prepare for stable node insertion */ -+ parent = NULL; -+ new = &tree_node->sub_root.rb_node; -+ } -+ -+add_node: -+ rb_link_node(&new_node->node, parent, new); -+ rb_insert_color(&new_node->node, &tree_node->sub_root); -+ new_node->tree_node = tree_node; -+ tree_node->count++; -+ return; -+ -+failed: -+ /* This can only happen when two nodes have collided -+ * in two levels. -+ */ -+ new_node->tree_node = NULL; -+ return; -+} -+ -+static inline void free_all_tree_nodes(struct list_head *list) -+{ -+ struct tree_node *node, *tmp; -+ -+ list_for_each_entry_safe(node, tmp, list, all_list) { -+ free_tree_node(node); -+ } -+} -+ -+/** -+ * stable_tree_delta_hash() - Delta hash the stable tree from previous hash -+ * strength to the current hash_strength. It re-structures the hole tree. -+ */ -+static inline void stable_tree_delta_hash(u32 prev_hash_strength) -+{ -+ struct stable_node *node, *tmp; -+ struct rb_root *root_new_treep; -+ struct list_head *new_tree_node_listp; -+ -+ stable_tree_index = (stable_tree_index + 1) % 2; -+ root_new_treep = &root_stable_tree[stable_tree_index]; -+ new_tree_node_listp = &stable_tree_node_list[stable_tree_index]; -+ *root_new_treep = RB_ROOT; -+ BUG_ON(!list_empty(new_tree_node_listp)); -+ -+ /* -+ * we need to be safe, the node could be removed by get_uksm_page() -+ */ -+ list_for_each_entry_safe(node, tmp, &stable_node_list, all_list) { -+ void *addr; -+ struct page *node_page; -+ u32 hash; -+ -+ /* -+ * We are completely re-structuring the stable nodes to a new -+ * stable tree. We don't want to touch the old tree unlinks and -+ * old tree_nodes. The old tree_nodes will be freed at once. -+ */ -+ node_page = get_uksm_page(node, 0, 0); -+ if (!node_page) -+ continue; -+ -+ if (node->tree_node) { -+ hash = node->tree_node->hash; -+ -+ addr = kmap_atomic(node_page); -+ -+ hash = delta_hash(addr, prev_hash_strength, -+ hash_strength, hash); -+ kunmap_atomic(addr); -+ } else { -+ /* -+ *it was not inserted to rbtree due to collision in last -+ *round scan. -+ */ -+ hash = page_hash(node_page, hash_strength, 0); -+ } -+ -+ stable_node_reinsert(node, node_page, root_new_treep, -+ new_tree_node_listp, hash); -+ put_page(node_page); -+ } -+ -+ root_stable_treep = root_new_treep; -+ free_all_tree_nodes(stable_tree_node_listp); -+ BUG_ON(!list_empty(stable_tree_node_listp)); -+ stable_tree_node_listp = new_tree_node_listp; -+} -+ -+static inline void inc_hash_strength(unsigned long delta) -+{ -+ hash_strength += 1 << delta; -+ if (hash_strength > HASH_STRENGTH_MAX) -+ hash_strength = HASH_STRENGTH_MAX; -+} -+ -+static inline void dec_hash_strength(unsigned long delta) -+{ -+ unsigned long change = 1 << delta; -+ -+ if (hash_strength <= change + 1) -+ hash_strength = 1; -+ else -+ hash_strength -= change; -+} -+ -+static inline void inc_hash_strength_delta(void) -+{ -+ hash_strength_delta++; -+ if (hash_strength_delta > HASH_STRENGTH_DELTA_MAX) -+ hash_strength_delta = HASH_STRENGTH_DELTA_MAX; -+} -+ -+static inline unsigned long get_current_neg_ratio(void) -+{ -+ u64 pos = benefit.pos; -+ u64 neg = benefit.neg; -+ -+ if (!neg) -+ return 0; -+ -+ if (!pos || neg > pos) -+ return 100; -+ -+ if (neg > div64_u64(U64_MAX, 100)) -+ pos = div64_u64(pos, 100); -+ else -+ neg *= 100; -+ -+ return div64_u64(neg, pos); -+} -+ -+static inline unsigned long get_current_benefit(void) -+{ -+ u64 pos = benefit.pos; -+ u64 neg = benefit.neg; -+ u64 scanned = benefit.scanned; -+ -+ if (neg > pos) -+ return 0; -+ -+ return div64_u64((pos - neg), scanned); -+} -+ -+static inline int judge_rshash_direction(void) -+{ -+ u64 current_neg_ratio, stable_benefit; -+ u64 current_benefit, delta = 0; -+ int ret = STILL; -+ -+ /* -+ * Try to probe a value after the boot, and in case the system -+ * are still for a long time. -+ */ -+ if ((fully_scanned_round & 0xFFULL) == 10) { -+ ret = OBSCURE; -+ goto out; -+ } -+ -+ current_neg_ratio = get_current_neg_ratio(); -+ -+ if (current_neg_ratio == 0) { -+ rshash_neg_cont_zero++; -+ if (rshash_neg_cont_zero > 2) -+ return GO_DOWN; -+ else -+ return STILL; -+ } -+ rshash_neg_cont_zero = 0; -+ -+ if (current_neg_ratio > 90) { -+ ret = GO_UP; -+ goto out; -+ } -+ -+ current_benefit = get_current_benefit(); -+ stable_benefit = rshash_state.stable_benefit; -+ -+ if (!stable_benefit) { -+ ret = OBSCURE; -+ goto out; -+ } -+ -+ if (current_benefit > stable_benefit) -+ delta = current_benefit - stable_benefit; -+ else if (current_benefit < stable_benefit) -+ delta = stable_benefit - current_benefit; -+ -+ delta = div64_u64(100 * delta, stable_benefit); -+ -+ if (delta > 50) { -+ rshash_cont_obscure++; -+ if (rshash_cont_obscure > 2) -+ return OBSCURE; -+ else -+ return STILL; -+ } -+ -+out: -+ rshash_cont_obscure = 0; -+ return ret; -+} -+ -+/** -+ * rshash_adjust() - The main function to control the random sampling state -+ * machine for hash strength adapting. -+ * -+ * return true if hash_strength has changed. -+ */ -+static inline int rshash_adjust(void) -+{ -+ unsigned long prev_hash_strength = hash_strength; -+ -+ if (!encode_benefit()) -+ return 0; -+ -+ switch (rshash_state.state) { -+ case RSHASH_STILL: -+ switch (judge_rshash_direction()) { -+ case GO_UP: -+ if (rshash_state.pre_direct == GO_DOWN) -+ hash_strength_delta = 0; -+ -+ inc_hash_strength(hash_strength_delta); -+ inc_hash_strength_delta(); -+ rshash_state.stable_benefit = get_current_benefit(); -+ rshash_state.pre_direct = GO_UP; -+ break; -+ -+ case GO_DOWN: -+ if (rshash_state.pre_direct == GO_UP) -+ hash_strength_delta = 0; -+ -+ dec_hash_strength(hash_strength_delta); -+ inc_hash_strength_delta(); -+ rshash_state.stable_benefit = get_current_benefit(); -+ rshash_state.pre_direct = GO_DOWN; -+ break; -+ -+ case OBSCURE: -+ rshash_state.stable_point = hash_strength; -+ rshash_state.turn_point_down = hash_strength; -+ rshash_state.turn_point_up = hash_strength; -+ rshash_state.turn_benefit_down = get_current_benefit(); -+ rshash_state.turn_benefit_up = get_current_benefit(); -+ rshash_state.lookup_window_index = 0; -+ rshash_state.state = RSHASH_TRYDOWN; -+ dec_hash_strength(hash_strength_delta); -+ inc_hash_strength_delta(); -+ break; -+ -+ case STILL: -+ break; -+ default: -+ BUG(); -+ } -+ break; -+ -+ case RSHASH_TRYDOWN: -+ if (rshash_state.lookup_window_index++ % 5 == 0) -+ rshash_state.below_count = 0; -+ -+ if (get_current_benefit() < rshash_state.stable_benefit) -+ rshash_state.below_count++; -+ else if (get_current_benefit() > -+ rshash_state.turn_benefit_down) { -+ rshash_state.turn_point_down = hash_strength; -+ rshash_state.turn_benefit_down = get_current_benefit(); -+ } -+ -+ if (rshash_state.below_count >= 3 || -+ judge_rshash_direction() == GO_UP || -+ hash_strength == 1) { -+ hash_strength = rshash_state.stable_point; -+ hash_strength_delta = 0; -+ inc_hash_strength(hash_strength_delta); -+ inc_hash_strength_delta(); -+ rshash_state.lookup_window_index = 0; -+ rshash_state.state = RSHASH_TRYUP; -+ hash_strength_delta = 0; -+ } else { -+ dec_hash_strength(hash_strength_delta); -+ inc_hash_strength_delta(); -+ } -+ break; -+ -+ case RSHASH_TRYUP: -+ if (rshash_state.lookup_window_index++ % 5 == 0) -+ rshash_state.below_count = 0; -+ -+ if (get_current_benefit() < rshash_state.turn_benefit_down) -+ rshash_state.below_count++; -+ else if (get_current_benefit() > rshash_state.turn_benefit_up) { -+ rshash_state.turn_point_up = hash_strength; -+ rshash_state.turn_benefit_up = get_current_benefit(); -+ } -+ -+ if (rshash_state.below_count >= 3 || -+ judge_rshash_direction() == GO_DOWN || -+ hash_strength == HASH_STRENGTH_MAX) { -+ hash_strength = rshash_state.turn_benefit_up > -+ rshash_state.turn_benefit_down ? -+ rshash_state.turn_point_up : -+ rshash_state.turn_point_down; -+ -+ rshash_state.state = RSHASH_PRE_STILL; -+ } else { -+ inc_hash_strength(hash_strength_delta); -+ inc_hash_strength_delta(); -+ } -+ -+ break; -+ -+ case RSHASH_NEW: -+ case RSHASH_PRE_STILL: -+ rshash_state.stable_benefit = get_current_benefit(); -+ rshash_state.state = RSHASH_STILL; -+ hash_strength_delta = 0; -+ break; -+ default: -+ BUG(); -+ } -+ -+ /* rshash_neg = rshash_pos = 0; */ -+ reset_benefit(); -+ -+ if (prev_hash_strength != hash_strength) -+ stable_tree_delta_hash(prev_hash_strength); -+ -+ return prev_hash_strength != hash_strength; -+} -+ -+/** -+ * round_update_ladder() - The main function to do update of all the -+ * adjustments whenever a scan round is finished. -+ */ -+static noinline void round_update_ladder(void) -+{ -+ int i; -+ unsigned long dedup; -+ struct vma_slot *slot, *tmp_slot; -+ -+ for (i = 0; i < SCAN_LADDER_SIZE; i++) -+ uksm_scan_ladder[i].flags &= ~UKSM_RUNG_ROUND_FINISHED; -+ -+ list_for_each_entry_safe(slot, tmp_slot, &vma_slot_dedup, dedup_list) { -+ -+ /* slot may be rung_rm_slot() when mm exits */ -+ if (slot->snode) { -+ dedup = cal_dedup_ratio_old(slot); -+ if (dedup && dedup >= uksm_abundant_threshold) -+ vma_rung_up(slot); -+ } -+ -+ slot->pages_bemerged = 0; -+ slot->pages_cowed = 0; -+ -+ list_del_init(&slot->dedup_list); -+ } -+} -+ -+static void uksm_del_vma_slot(struct vma_slot *slot) -+{ -+ int i, j; -+ struct rmap_list_entry *entry; -+ -+ if (slot->snode) { -+ /* -+ * In case it just failed when entering the rung, it's not -+ * necessary. -+ */ -+ rung_rm_slot(slot); -+ } -+ -+ if (!list_empty(&slot->dedup_list)) -+ list_del(&slot->dedup_list); -+ -+ if (!slot->rmap_list_pool || !slot->pool_counts) { -+ /* In case it OOMed in uksm_vma_enter() */ -+ goto out; -+ } -+ -+ for (i = 0; i < slot->pool_size; i++) { -+ void *addr; -+ -+ if (!slot->rmap_list_pool[i]) -+ continue; -+ -+ addr = kmap(slot->rmap_list_pool[i]); -+ for (j = 0; j < PAGE_SIZE / sizeof(*entry); j++) { -+ entry = (struct rmap_list_entry *)addr + j; -+ if (is_addr(entry->addr)) -+ continue; -+ if (!entry->item) -+ continue; -+ -+ remove_rmap_item_from_tree(entry->item); -+ free_rmap_item(entry->item); -+ slot->pool_counts[i]--; -+ } -+ BUG_ON(slot->pool_counts[i]); -+ kunmap(slot->rmap_list_pool[i]); -+ __free_page(slot->rmap_list_pool[i]); -+ } -+ kfree(slot->rmap_list_pool); -+ kfree(slot->pool_counts); -+ -+out: -+ slot->rung = NULL; -+ if (slot->flags & UKSM_SLOT_IN_UKSM) { -+ BUG_ON(uksm_pages_total < slot->pages); -+ uksm_pages_total -= slot->pages; -+ } -+ -+ if (slot->fully_scanned_round == fully_scanned_round) -+ scanned_virtual_pages -= slot->pages; -+ else -+ scanned_virtual_pages -= slot->pages_scanned; -+ free_vma_slot(slot); -+} -+ -+ -+#define SPIN_LOCK_PERIOD 32 -+static struct vma_slot *cleanup_slots[SPIN_LOCK_PERIOD]; -+static inline void cleanup_vma_slots(void) -+{ -+ struct vma_slot *slot; -+ int i; -+ -+ i = 0; -+ spin_lock(&vma_slot_list_lock); -+ while (!list_empty(&vma_slot_del)) { -+ slot = list_entry(vma_slot_del.next, -+ struct vma_slot, slot_list); -+ list_del(&slot->slot_list); -+ cleanup_slots[i++] = slot; -+ if (i == SPIN_LOCK_PERIOD) { -+ spin_unlock(&vma_slot_list_lock); -+ while (--i >= 0) -+ uksm_del_vma_slot(cleanup_slots[i]); -+ i = 0; -+ spin_lock(&vma_slot_list_lock); -+ } -+ } -+ spin_unlock(&vma_slot_list_lock); -+ -+ while (--i >= 0) -+ uksm_del_vma_slot(cleanup_slots[i]); -+} -+ -+/* -+ * Expotional moving average formula -+ */ -+static inline unsigned long ema(unsigned long curr, unsigned long last_ema) -+{ -+ /* -+ * For a very high burst, even the ema cannot work well, a false very -+ * high per-page time estimation can result in feedback in very high -+ * overhead of context switch and rung update -- this will then lead -+ * to higher per-paper time, this may not converge. -+ * -+ * Instead, we try to approach this value in a binary manner. -+ */ -+ if (curr > last_ema * 10) -+ return last_ema * 2; -+ -+ return (EMA_ALPHA * curr + (100 - EMA_ALPHA) * last_ema) / 100; -+} -+ -+/* -+ * convert cpu ratio in 1/TIME_RATIO_SCALE configured by user to -+ * nanoseconds based on current uksm_sleep_jiffies. -+ */ -+static inline unsigned long cpu_ratio_to_nsec(unsigned int ratio) -+{ -+ return NSEC_PER_USEC * jiffies_to_usecs(uksm_sleep_jiffies) / -+ (TIME_RATIO_SCALE - ratio) * ratio; -+} -+ -+ -+static inline unsigned long rung_real_ratio(int cpu_time_ratio) -+{ -+ unsigned long ret; -+ -+ BUG_ON(!cpu_time_ratio); -+ -+ if (cpu_time_ratio > 0) -+ ret = cpu_time_ratio; -+ else -+ ret = (unsigned long)(-cpu_time_ratio) * -+ uksm_max_cpu_percentage / 100UL; -+ -+ return ret ? ret : 1; -+} -+ -+static noinline void uksm_calc_scan_pages(void) -+{ -+ struct scan_rung *ladder = uksm_scan_ladder; -+ unsigned long sleep_usecs, nsecs; -+ unsigned long ratio; -+ int i; -+ unsigned long per_page; -+ -+ if (uksm_ema_page_time > 100000 || -+ (((unsigned long) uksm_eval_round & (256UL - 1)) == 0UL)) -+ uksm_ema_page_time = UKSM_PAGE_TIME_DEFAULT; -+ -+ per_page = uksm_ema_page_time; -+ BUG_ON(!per_page); -+ -+ /* -+ * For every 8 eval round, we try to probe a uksm_sleep_jiffies value -+ * based on saved user input. -+ */ -+ if (((unsigned long) uksm_eval_round & (8UL - 1)) == 0UL) -+ uksm_sleep_jiffies = uksm_sleep_saved; -+ -+ /* We require a rung scan at least 1 page in a period. */ -+ nsecs = per_page; -+ ratio = rung_real_ratio(ladder[0].cpu_ratio); -+ if (cpu_ratio_to_nsec(ratio) < nsecs) { -+ sleep_usecs = nsecs * (TIME_RATIO_SCALE - ratio) / ratio -+ / NSEC_PER_USEC; -+ uksm_sleep_jiffies = usecs_to_jiffies(sleep_usecs) + 1; -+ } -+ -+ for (i = 0; i < SCAN_LADDER_SIZE; i++) { -+ ratio = rung_real_ratio(ladder[i].cpu_ratio); -+ ladder[i].pages_to_scan = cpu_ratio_to_nsec(ratio) / -+ per_page; -+ BUG_ON(!ladder[i].pages_to_scan); -+ uksm_calc_rung_step(&ladder[i], per_page, ratio); -+ } -+} -+ -+/* -+ * From the scan time of this round (ns) to next expected min sleep time -+ * (ms), be careful of the possible overflows. ratio is taken from -+ * rung_real_ratio() -+ */ -+static inline -+unsigned int scan_time_to_sleep(unsigned long long scan_time, unsigned long ratio) -+{ -+ scan_time >>= 20; /* to msec level now */ -+ BUG_ON(scan_time > (ULONG_MAX / TIME_RATIO_SCALE)); -+ -+ return (unsigned int) ((unsigned long) scan_time * -+ (TIME_RATIO_SCALE - ratio) / ratio); -+} -+ -+#define __round_mask(x, y) ((__typeof__(x))((y)-1)) -+#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1) -+ -+static void uksm_vma_enter(struct vma_slot **slots, unsigned long num) -+{ -+ struct scan_rung *rung; -+ -+ rung = &uksm_scan_ladder[0]; -+ rung_add_new_slots(rung, slots, num); -+} -+ -+static struct vma_slot *batch_slots[SLOT_TREE_NODE_STORE_SIZE]; -+ -+static void uksm_enter_all_slots(void) -+{ -+ struct vma_slot *slot; -+ unsigned long index; -+ struct list_head empty_vma_list; -+ int i; -+ -+ i = 0; -+ index = 0; -+ INIT_LIST_HEAD(&empty_vma_list); -+ -+ spin_lock(&vma_slot_list_lock); -+ while (!list_empty(&vma_slot_new)) { -+ slot = list_entry(vma_slot_new.next, -+ struct vma_slot, slot_list); -+ -+ if (!slot->vma->anon_vma) { -+ list_move(&slot->slot_list, &empty_vma_list); -+ } else if (vma_can_enter(slot->vma)) { -+ batch_slots[index++] = slot; -+ list_del_init(&slot->slot_list); -+ } else { -+ list_move(&slot->slot_list, &vma_slot_noadd); -+ } -+ -+ if (++i == SPIN_LOCK_PERIOD || -+ (index && !(index % SLOT_TREE_NODE_STORE_SIZE))) { -+ spin_unlock(&vma_slot_list_lock); -+ -+ if (index && !(index % SLOT_TREE_NODE_STORE_SIZE)) { -+ uksm_vma_enter(batch_slots, index); -+ index = 0; -+ } -+ i = 0; -+ cond_resched(); -+ spin_lock(&vma_slot_list_lock); -+ } -+ } -+ -+ list_splice(&empty_vma_list, &vma_slot_new); -+ -+ spin_unlock(&vma_slot_list_lock); -+ -+ if (index) -+ uksm_vma_enter(batch_slots, index); -+ -+} -+ -+static inline int rung_round_finished(struct scan_rung *rung) -+{ -+ return rung->flags & UKSM_RUNG_ROUND_FINISHED; -+} -+ -+static inline void judge_slot(struct vma_slot *slot) -+{ -+ struct scan_rung *rung = slot->rung; -+ unsigned long dedup; -+ int deleted; -+ -+ dedup = cal_dedup_ratio(slot); -+ if (vma_fully_scanned(slot) && uksm_thrash_threshold) -+ deleted = vma_rung_enter(slot, &uksm_scan_ladder[0]); -+ else if (dedup && dedup >= uksm_abundant_threshold) -+ deleted = vma_rung_up(slot); -+ else -+ deleted = vma_rung_down(slot); -+ -+ slot->pages_merged = 0; -+ slot->pages_cowed = 0; -+ slot->this_sampled = 0; -+ -+ if (vma_fully_scanned(slot)) -+ slot->pages_scanned = 0; -+ -+ slot->last_scanned = slot->pages_scanned; -+ -+ /* If its deleted in above, then rung was already advanced. */ -+ if (!deleted) -+ advance_current_scan(rung); -+} -+ -+ -+static inline int hash_round_finished(void) -+{ -+ if (scanned_virtual_pages > (uksm_pages_total >> 2)) { -+ scanned_virtual_pages = 0; -+ if (uksm_pages_scanned) -+ fully_scanned_round++; -+ -+ return 1; -+ } else { -+ return 0; -+ } -+} -+ -+#define UKSM_MMSEM_BATCH 5 -+#define BUSY_RETRY 100 -+ -+/** -+ * uksm_do_scan() - the main worker function. -+ */ -+static noinline void uksm_do_scan(void) -+{ -+ struct vma_slot *slot, *iter; -+ struct mm_struct *busy_mm; -+ unsigned char round_finished, all_rungs_emtpy; -+ int i, err, mmsem_batch; -+ unsigned long pcost; -+ long long delta_exec; -+ unsigned long vpages, max_cpu_ratio; -+ unsigned long long start_time, end_time, scan_time; -+ unsigned int expected_jiffies; -+ -+ might_sleep(); -+ -+ vpages = 0; -+ -+ start_time = task_sched_runtime(current); -+ max_cpu_ratio = 0; -+ mmsem_batch = 0; -+ -+ for (i = 0; i < SCAN_LADDER_SIZE;) { -+ struct scan_rung *rung = &uksm_scan_ladder[i]; -+ unsigned long ratio; -+ int busy_retry; -+ -+ if (!rung->pages_to_scan) { -+ i++; -+ continue; -+ } -+ -+ if (!rung->vma_root.num) { -+ rung->pages_to_scan = 0; -+ i++; -+ continue; -+ } -+ -+ ratio = rung_real_ratio(rung->cpu_ratio); -+ if (ratio > max_cpu_ratio) -+ max_cpu_ratio = ratio; -+ -+ busy_retry = BUSY_RETRY; -+ /* -+ * Do not consider rung_round_finished() here, just used up the -+ * rung->pages_to_scan quota. -+ */ -+ while (rung->pages_to_scan && rung->vma_root.num && -+ likely(!freezing(current))) { -+ int reset = 0; -+ -+ slot = rung->current_scan; -+ -+ BUG_ON(vma_fully_scanned(slot)); -+ -+ if (mmsem_batch) -+ err = 0; -+ else -+ err = try_down_read_slot_mmap_sem(slot); -+ -+ if (err == -ENOENT) { -+rm_slot: -+ rung_rm_slot(slot); -+ continue; -+ } -+ -+ busy_mm = slot->mm; -+ -+ if (err == -EBUSY) { -+ /* skip other vmas on the same mm */ -+ do { -+ reset = advance_current_scan(rung); -+ iter = rung->current_scan; -+ busy_retry--; -+ if (iter->vma->vm_mm != busy_mm || -+ !busy_retry || reset) -+ break; -+ } while (1); -+ -+ if (iter->vma->vm_mm != busy_mm) { -+ continue; -+ } else { -+ /* scan round finsished */ -+ break; -+ } -+ } -+ -+ BUG_ON(!vma_can_enter(slot->vma)); -+ if (uksm_test_exit(slot->vma->vm_mm)) { -+ mmsem_batch = 0; -+ up_read(&slot->vma->vm_mm->mmap_sem); -+ goto rm_slot; -+ } -+ -+ if (mmsem_batch) -+ mmsem_batch--; -+ else -+ mmsem_batch = UKSM_MMSEM_BATCH; -+ -+ /* Ok, we have take the mmap_sem, ready to scan */ -+ scan_vma_one_page(slot); -+ rung->pages_to_scan--; -+ vpages++; -+ -+ if (rung->current_offset + rung->step > slot->pages - 1 -+ || vma_fully_scanned(slot)) { -+ up_read(&slot->vma->vm_mm->mmap_sem); -+ judge_slot(slot); -+ mmsem_batch = 0; -+ } else { -+ rung->current_offset += rung->step; -+ if (!mmsem_batch) -+ up_read(&slot->vma->vm_mm->mmap_sem); -+ } -+ -+ busy_retry = BUSY_RETRY; -+ cond_resched(); -+ } -+ -+ if (mmsem_batch) { -+ up_read(&slot->vma->vm_mm->mmap_sem); -+ mmsem_batch = 0; -+ } -+ -+ if (freezing(current)) -+ break; -+ -+ cond_resched(); -+ } -+ end_time = task_sched_runtime(current); -+ delta_exec = end_time - start_time; -+ -+ if (freezing(current)) -+ return; -+ -+ cleanup_vma_slots(); -+ uksm_enter_all_slots(); -+ -+ round_finished = 1; -+ all_rungs_emtpy = 1; -+ for (i = 0; i < SCAN_LADDER_SIZE; i++) { -+ struct scan_rung *rung = &uksm_scan_ladder[i]; -+ -+ if (rung->vma_root.num) { -+ all_rungs_emtpy = 0; -+ if (!rung_round_finished(rung)) -+ round_finished = 0; -+ } -+ } -+ -+ if (all_rungs_emtpy) -+ round_finished = 0; -+ -+ if (round_finished) { -+ round_update_ladder(); -+ uksm_eval_round++; -+ -+ if (hash_round_finished() && rshash_adjust()) { -+ /* Reset the unstable root iff hash strength changed */ -+ uksm_hash_round++; -+ root_unstable_tree = RB_ROOT; -+ free_all_tree_nodes(&unstable_tree_node_list); -+ } -+ -+ /* -+ * A number of pages can hang around indefinitely on per-cpu -+ * pagevecs, raised page count preventing write_protect_page -+ * from merging them. Though it doesn't really matter much, -+ * it is puzzling to see some stuck in pages_volatile until -+ * other activity jostles them out, and they also prevented -+ * LTP's KSM test from succeeding deterministically; so drain -+ * them here (here rather than on entry to uksm_do_scan(), -+ * so we don't IPI too often when pages_to_scan is set low). -+ */ -+ lru_add_drain_all(); -+ } -+ -+ -+ if (vpages && delta_exec > 0) { -+ pcost = (unsigned long) delta_exec / vpages; -+ if (likely(uksm_ema_page_time)) -+ uksm_ema_page_time = ema(pcost, uksm_ema_page_time); -+ else -+ uksm_ema_page_time = pcost; -+ } -+ -+ uksm_calc_scan_pages(); -+ uksm_sleep_real = uksm_sleep_jiffies; -+ /* in case of radical cpu bursts, apply the upper bound */ -+ end_time = task_sched_runtime(current); -+ if (max_cpu_ratio && end_time > start_time) { -+ scan_time = end_time - start_time; -+ expected_jiffies = msecs_to_jiffies( -+ scan_time_to_sleep(scan_time, max_cpu_ratio)); -+ -+ if (expected_jiffies > uksm_sleep_real) -+ uksm_sleep_real = expected_jiffies; -+ -+ /* We have a 1 second up bound for responsiveness. */ -+ if (jiffies_to_msecs(uksm_sleep_real) > MSEC_PER_SEC) -+ uksm_sleep_real = msecs_to_jiffies(1000); -+ } -+ -+ return; -+} -+ -+static int ksmd_should_run(void) -+{ -+ return uksm_run & UKSM_RUN_MERGE; -+} -+ -+static int uksm_scan_thread(void *nothing) -+{ -+ set_freezable(); -+ set_user_nice(current, 5); -+ -+ while (!kthread_should_stop()) { -+ mutex_lock(&uksm_thread_mutex); -+ if (ksmd_should_run()) -+ uksm_do_scan(); -+ mutex_unlock(&uksm_thread_mutex); -+ -+ try_to_freeze(); -+ -+ if (ksmd_should_run()) { -+ schedule_timeout_interruptible(uksm_sleep_real); -+ uksm_sleep_times++; -+ } else { -+ wait_event_freezable(uksm_thread_wait, -+ ksmd_should_run() || kthread_should_stop()); -+ } -+ } -+ return 0; -+} -+ -+void rmap_walk_ksm(struct page *page, struct rmap_walk_control *rwc) -+{ -+ struct stable_node *stable_node; -+ struct node_vma *node_vma; -+ struct rmap_item *rmap_item; -+ int search_new_forks = 0; -+ unsigned long address; -+ -+ VM_BUG_ON_PAGE(!PageKsm(page), page); -+ VM_BUG_ON_PAGE(!PageLocked(page), page); -+ -+ stable_node = page_stable_node(page); -+ if (!stable_node) -+ return; -+again: -+ hlist_for_each_entry(node_vma, &stable_node->hlist, hlist) { -+ hlist_for_each_entry(rmap_item, &node_vma->rmap_hlist, hlist) { -+ struct anon_vma *anon_vma = rmap_item->anon_vma; -+ struct anon_vma_chain *vmac; -+ struct vm_area_struct *vma; -+ -+ cond_resched(); -+ anon_vma_lock_read(anon_vma); -+ anon_vma_interval_tree_foreach(vmac, &anon_vma->rb_root, -+ 0, ULONG_MAX) { -+ cond_resched(); -+ vma = vmac->vma; -+ address = get_rmap_addr(rmap_item); -+ -+ if (address < vma->vm_start || -+ address >= vma->vm_end) -+ continue; -+ -+ if ((rmap_item->slot->vma == vma) == -+ search_new_forks) -+ continue; -+ -+ if (rwc->invalid_vma && rwc->invalid_vma(vma, rwc->arg)) -+ continue; -+ -+ if (!rwc->rmap_one(page, vma, address, rwc->arg)) { -+ anon_vma_unlock_read(anon_vma); -+ return; -+ } -+ -+ if (rwc->done && rwc->done(page)) { -+ anon_vma_unlock_read(anon_vma); -+ return; -+ } -+ } -+ anon_vma_unlock_read(anon_vma); -+ } -+ } -+ if (!search_new_forks++) -+ goto again; -+} -+ -+#ifdef CONFIG_MIGRATION -+/* Common ksm interface but may be specific to uksm */ -+void ksm_migrate_page(struct page *newpage, struct page *oldpage) -+{ -+ struct stable_node *stable_node; -+ -+ VM_BUG_ON_PAGE(!PageLocked(oldpage), oldpage); -+ VM_BUG_ON_PAGE(!PageLocked(newpage), newpage); -+ VM_BUG_ON(newpage->mapping != oldpage->mapping); -+ -+ stable_node = page_stable_node(newpage); -+ if (stable_node) { -+ VM_BUG_ON(stable_node->kpfn != page_to_pfn(oldpage)); -+ stable_node->kpfn = page_to_pfn(newpage); -+ /* -+ * newpage->mapping was set in advance; now we need smp_wmb() -+ * to make sure that the new stable_node->kpfn is visible -+ * to get_ksm_page() before it can see that oldpage->mapping -+ * has gone stale (or that PageSwapCache has been cleared). -+ */ -+ smp_wmb(); -+ set_page_stable_node(oldpage, NULL); -+ } -+} -+#endif /* CONFIG_MIGRATION */ -+ -+#ifdef CONFIG_MEMORY_HOTREMOVE -+static struct stable_node *uksm_check_stable_tree(unsigned long start_pfn, -+ unsigned long end_pfn) -+{ -+ struct rb_node *node; -+ -+ for (node = rb_first(root_stable_treep); node; node = rb_next(node)) { -+ struct stable_node *stable_node; -+ -+ stable_node = rb_entry(node, struct stable_node, node); -+ if (stable_node->kpfn >= start_pfn && -+ stable_node->kpfn < end_pfn) -+ return stable_node; -+ } -+ return NULL; -+} -+ -+static int uksm_memory_callback(struct notifier_block *self, -+ unsigned long action, void *arg) -+{ -+ struct memory_notify *mn = arg; -+ struct stable_node *stable_node; -+ -+ switch (action) { -+ case MEM_GOING_OFFLINE: -+ /* -+ * Keep it very simple for now: just lock out ksmd and -+ * MADV_UNMERGEABLE while any memory is going offline. -+ * mutex_lock_nested() is necessary because lockdep was alarmed -+ * that here we take uksm_thread_mutex inside notifier chain -+ * mutex, and later take notifier chain mutex inside -+ * uksm_thread_mutex to unlock it. But that's safe because both -+ * are inside mem_hotplug_mutex. -+ */ -+ mutex_lock_nested(&uksm_thread_mutex, SINGLE_DEPTH_NESTING); -+ break; -+ -+ case MEM_OFFLINE: -+ /* -+ * Most of the work is done by page migration; but there might -+ * be a few stable_nodes left over, still pointing to struct -+ * pages which have been offlined: prune those from the tree. -+ */ -+ while ((stable_node = uksm_check_stable_tree(mn->start_pfn, -+ mn->start_pfn + mn->nr_pages)) != NULL) -+ remove_node_from_stable_tree(stable_node, 1, 1); -+ /* fallthrough */ -+ -+ case MEM_CANCEL_OFFLINE: -+ mutex_unlock(&uksm_thread_mutex); -+ break; -+ } -+ return NOTIFY_OK; -+} -+#endif /* CONFIG_MEMORY_HOTREMOVE */ -+ -+#ifdef CONFIG_SYSFS -+/* -+ * This all compiles without CONFIG_SYSFS, but is a waste of space. -+ */ -+ -+#define UKSM_ATTR_RO(_name) \ -+ static struct kobj_attribute _name##_attr = __ATTR_RO(_name) -+#define UKSM_ATTR(_name) \ -+ static struct kobj_attribute _name##_attr = \ -+ __ATTR(_name, 0644, _name##_show, _name##_store) -+ -+static ssize_t max_cpu_percentage_show(struct kobject *kobj, -+ struct kobj_attribute *attr, char *buf) -+{ -+ return sprintf(buf, "%u\n", uksm_max_cpu_percentage); -+} -+ -+static ssize_t max_cpu_percentage_store(struct kobject *kobj, -+ struct kobj_attribute *attr, -+ const char *buf, size_t count) -+{ -+ unsigned long max_cpu_percentage; -+ int err; -+ -+ err = kstrtoul(buf, 10, &max_cpu_percentage); -+ if (err || max_cpu_percentage > 100) -+ return -EINVAL; -+ -+ if (max_cpu_percentage == 100) -+ max_cpu_percentage = 99; -+ else if (max_cpu_percentage < 10) -+ max_cpu_percentage = 10; -+ -+ uksm_max_cpu_percentage = max_cpu_percentage; -+ -+ return count; -+} -+UKSM_ATTR(max_cpu_percentage); -+ -+static ssize_t sleep_millisecs_show(struct kobject *kobj, -+ struct kobj_attribute *attr, char *buf) -+{ -+ return sprintf(buf, "%u\n", jiffies_to_msecs(uksm_sleep_jiffies)); -+} -+ -+static ssize_t sleep_millisecs_store(struct kobject *kobj, -+ struct kobj_attribute *attr, -+ const char *buf, size_t count) -+{ -+ unsigned long msecs; -+ int err; -+ -+ err = kstrtoul(buf, 10, &msecs); -+ if (err || msecs > MSEC_PER_SEC) -+ return -EINVAL; -+ -+ uksm_sleep_jiffies = msecs_to_jiffies(msecs); -+ uksm_sleep_saved = uksm_sleep_jiffies; -+ -+ return count; -+} -+UKSM_ATTR(sleep_millisecs); -+ -+ -+static ssize_t cpu_governor_show(struct kobject *kobj, -+ struct kobj_attribute *attr, char *buf) -+{ -+ int n = sizeof(uksm_cpu_governor_str) / sizeof(char *); -+ int i; -+ -+ buf[0] = '\0'; -+ for (i = 0; i < n ; i++) { -+ if (uksm_cpu_governor == i) -+ strcat(buf, "["); -+ -+ strcat(buf, uksm_cpu_governor_str[i]); -+ -+ if (uksm_cpu_governor == i) -+ strcat(buf, "]"); -+ -+ strcat(buf, " "); -+ } -+ strcat(buf, "\n"); -+ -+ return strlen(buf); -+} -+ -+static inline void init_performance_values(void) -+{ -+ int i; -+ struct scan_rung *rung; -+ struct uksm_cpu_preset_s *preset = uksm_cpu_preset + uksm_cpu_governor; -+ -+ -+ for (i = 0; i < SCAN_LADDER_SIZE; i++) { -+ rung = uksm_scan_ladder + i; -+ rung->cpu_ratio = preset->cpu_ratio[i]; -+ rung->cover_msecs = preset->cover_msecs[i]; -+ } -+ -+ uksm_max_cpu_percentage = preset->max_cpu; -+} -+ -+static ssize_t cpu_governor_store(struct kobject *kobj, -+ struct kobj_attribute *attr, -+ const char *buf, size_t count) -+{ -+ int n = sizeof(uksm_cpu_governor_str) / sizeof(char *); -+ -+ for (n--; n >= 0 ; n--) { -+ if (!strncmp(buf, uksm_cpu_governor_str[n], -+ strlen(uksm_cpu_governor_str[n]))) -+ break; -+ } -+ -+ if (n < 0) -+ return -EINVAL; -+ else -+ uksm_cpu_governor = n; -+ -+ init_performance_values(); -+ -+ return count; -+} -+UKSM_ATTR(cpu_governor); -+ -+static ssize_t run_show(struct kobject *kobj, struct kobj_attribute *attr, -+ char *buf) -+{ -+ return sprintf(buf, "%u\n", uksm_run); -+} -+ -+static ssize_t run_store(struct kobject *kobj, struct kobj_attribute *attr, -+ const char *buf, size_t count) -+{ -+ int err; -+ unsigned long flags; -+ -+ err = kstrtoul(buf, 10, &flags); -+ if (err || flags > UINT_MAX) -+ return -EINVAL; -+ if (flags > UKSM_RUN_MERGE) -+ return -EINVAL; -+ -+ mutex_lock(&uksm_thread_mutex); -+ if (uksm_run != flags) -+ uksm_run = flags; -+ mutex_unlock(&uksm_thread_mutex); -+ -+ if (flags & UKSM_RUN_MERGE) -+ wake_up_interruptible(&uksm_thread_wait); -+ -+ return count; -+} -+UKSM_ATTR(run); -+ -+static ssize_t abundant_threshold_show(struct kobject *kobj, -+ struct kobj_attribute *attr, char *buf) -+{ -+ return sprintf(buf, "%u\n", uksm_abundant_threshold); -+} -+ -+static ssize_t abundant_threshold_store(struct kobject *kobj, -+ struct kobj_attribute *attr, -+ const char *buf, size_t count) -+{ -+ int err; -+ unsigned long flags; -+ -+ err = kstrtoul(buf, 10, &flags); -+ if (err || flags > 99) -+ return -EINVAL; -+ -+ uksm_abundant_threshold = flags; -+ -+ return count; -+} -+UKSM_ATTR(abundant_threshold); -+ -+static ssize_t thrash_threshold_show(struct kobject *kobj, -+ struct kobj_attribute *attr, char *buf) -+{ -+ return sprintf(buf, "%u\n", uksm_thrash_threshold); -+} -+ -+static ssize_t thrash_threshold_store(struct kobject *kobj, -+ struct kobj_attribute *attr, -+ const char *buf, size_t count) -+{ -+ int err; -+ unsigned long flags; -+ -+ err = kstrtoul(buf, 10, &flags); -+ if (err || flags > 99) -+ return -EINVAL; -+ -+ uksm_thrash_threshold = flags; -+ -+ return count; -+} -+UKSM_ATTR(thrash_threshold); -+ -+static ssize_t cpu_ratios_show(struct kobject *kobj, -+ struct kobj_attribute *attr, char *buf) -+{ -+ int i, size; -+ struct scan_rung *rung; -+ char *p = buf; -+ -+ for (i = 0; i < SCAN_LADDER_SIZE; i++) { -+ rung = &uksm_scan_ladder[i]; -+ -+ if (rung->cpu_ratio > 0) -+ size = sprintf(p, "%d ", rung->cpu_ratio); -+ else -+ size = sprintf(p, "MAX/%d ", -+ TIME_RATIO_SCALE / -rung->cpu_ratio); -+ -+ p += size; -+ } -+ -+ *p++ = '\n'; -+ *p = '\0'; -+ -+ return p - buf; -+} -+ -+static ssize_t cpu_ratios_store(struct kobject *kobj, -+ struct kobj_attribute *attr, -+ const char *buf, size_t count) -+{ -+ int i, cpuratios[SCAN_LADDER_SIZE], err; -+ unsigned long value; -+ struct scan_rung *rung; -+ char *p, *end = NULL; -+ -+ p = kzalloc(count, GFP_KERNEL); -+ if (!p) -+ return -ENOMEM; -+ -+ memcpy(p, buf, count); -+ -+ for (i = 0; i < SCAN_LADDER_SIZE; i++) { -+ if (i != SCAN_LADDER_SIZE - 1) { -+ end = strchr(p, ' '); -+ if (!end) -+ return -EINVAL; -+ -+ *end = '\0'; -+ } -+ -+ if (strstr(p, "MAX/")) { -+ p = strchr(p, '/') + 1; -+ err = kstrtoul(p, 10, &value); -+ if (err || value > TIME_RATIO_SCALE || !value) -+ return -EINVAL; -+ -+ cpuratios[i] = -(int) (TIME_RATIO_SCALE / value); -+ } else { -+ err = kstrtoul(p, 10, &value); -+ if (err || value > TIME_RATIO_SCALE || !value) -+ return -EINVAL; -+ -+ cpuratios[i] = value; -+ } -+ -+ p = end + 1; -+ } -+ -+ for (i = 0; i < SCAN_LADDER_SIZE; i++) { -+ rung = &uksm_scan_ladder[i]; -+ -+ rung->cpu_ratio = cpuratios[i]; -+ } -+ -+ return count; -+} -+UKSM_ATTR(cpu_ratios); -+ -+static ssize_t eval_intervals_show(struct kobject *kobj, -+ struct kobj_attribute *attr, char *buf) -+{ -+ int i, size; -+ struct scan_rung *rung; -+ char *p = buf; -+ -+ for (i = 0; i < SCAN_LADDER_SIZE; i++) { -+ rung = &uksm_scan_ladder[i]; -+ size = sprintf(p, "%u ", rung->cover_msecs); -+ p += size; -+ } -+ -+ *p++ = '\n'; -+ *p = '\0'; -+ -+ return p - buf; -+} -+ -+static ssize_t eval_intervals_store(struct kobject *kobj, -+ struct kobj_attribute *attr, -+ const char *buf, size_t count) -+{ -+ int i, err; -+ unsigned long values[SCAN_LADDER_SIZE]; -+ struct scan_rung *rung; -+ char *p, *end = NULL; -+ ssize_t ret = count; -+ -+ p = kzalloc(count + 2, GFP_KERNEL); -+ if (!p) -+ return -ENOMEM; -+ -+ memcpy(p, buf, count); -+ -+ for (i = 0; i < SCAN_LADDER_SIZE; i++) { -+ if (i != SCAN_LADDER_SIZE - 1) { -+ end = strchr(p, ' '); -+ if (!end) { -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ *end = '\0'; -+ } -+ -+ err = kstrtoul(p, 10, &values[i]); -+ if (err) { -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ p = end + 1; -+ } -+ -+ for (i = 0; i < SCAN_LADDER_SIZE; i++) { -+ rung = &uksm_scan_ladder[i]; -+ -+ rung->cover_msecs = values[i]; -+ } -+ -+out: -+ kfree(p); -+ return ret; -+} -+UKSM_ATTR(eval_intervals); -+ -+static ssize_t ema_per_page_time_show(struct kobject *kobj, -+ struct kobj_attribute *attr, char *buf) -+{ -+ return sprintf(buf, "%lu\n", uksm_ema_page_time); -+} -+UKSM_ATTR_RO(ema_per_page_time); -+ -+static ssize_t pages_shared_show(struct kobject *kobj, -+ struct kobj_attribute *attr, char *buf) -+{ -+ return sprintf(buf, "%lu\n", uksm_pages_shared); -+} -+UKSM_ATTR_RO(pages_shared); -+ -+static ssize_t pages_sharing_show(struct kobject *kobj, -+ struct kobj_attribute *attr, char *buf) -+{ -+ return sprintf(buf, "%lu\n", uksm_pages_sharing); -+} -+UKSM_ATTR_RO(pages_sharing); -+ -+static ssize_t pages_unshared_show(struct kobject *kobj, -+ struct kobj_attribute *attr, char *buf) -+{ -+ return sprintf(buf, "%lu\n", uksm_pages_unshared); -+} -+UKSM_ATTR_RO(pages_unshared); -+ -+static ssize_t full_scans_show(struct kobject *kobj, -+ struct kobj_attribute *attr, char *buf) -+{ -+ return sprintf(buf, "%llu\n", fully_scanned_round); -+} -+UKSM_ATTR_RO(full_scans); -+ -+static ssize_t pages_scanned_show(struct kobject *kobj, -+ struct kobj_attribute *attr, char *buf) -+{ -+ unsigned long base = 0; -+ u64 delta, ret; -+ -+ if (pages_scanned_stored) { -+ base = pages_scanned_base; -+ ret = pages_scanned_stored; -+ delta = uksm_pages_scanned >> base; -+ if (CAN_OVERFLOW_U64(ret, delta)) { -+ ret >>= 1; -+ delta >>= 1; -+ base++; -+ ret += delta; -+ } -+ } else { -+ ret = uksm_pages_scanned; -+ } -+ -+ while (ret > ULONG_MAX) { -+ ret >>= 1; -+ base++; -+ } -+ -+ if (base) -+ return sprintf(buf, "%lu * 2^%lu\n", (unsigned long)ret, base); -+ else -+ return sprintf(buf, "%lu\n", (unsigned long)ret); -+} -+UKSM_ATTR_RO(pages_scanned); -+ -+static ssize_t hash_strength_show(struct kobject *kobj, -+ struct kobj_attribute *attr, char *buf) -+{ -+ return sprintf(buf, "%lu\n", hash_strength); -+} -+UKSM_ATTR_RO(hash_strength); -+ -+static ssize_t sleep_times_show(struct kobject *kobj, -+ struct kobj_attribute *attr, char *buf) -+{ -+ return sprintf(buf, "%llu\n", uksm_sleep_times); -+} -+UKSM_ATTR_RO(sleep_times); -+ -+ -+static struct attribute *uksm_attrs[] = { -+ &max_cpu_percentage_attr.attr, -+ &sleep_millisecs_attr.attr, -+ &cpu_governor_attr.attr, -+ &run_attr.attr, -+ &ema_per_page_time_attr.attr, -+ &pages_shared_attr.attr, -+ &pages_sharing_attr.attr, -+ &pages_unshared_attr.attr, -+ &full_scans_attr.attr, -+ &pages_scanned_attr.attr, -+ &hash_strength_attr.attr, -+ &sleep_times_attr.attr, -+ &thrash_threshold_attr.attr, -+ &abundant_threshold_attr.attr, -+ &cpu_ratios_attr.attr, -+ &eval_intervals_attr.attr, -+ NULL, -+}; -+ -+static struct attribute_group uksm_attr_group = { -+ .attrs = uksm_attrs, -+ .name = "uksm", -+}; -+#endif /* CONFIG_SYSFS */ -+ -+static inline void init_scan_ladder(void) -+{ -+ int i; -+ struct scan_rung *rung; -+ -+ for (i = 0; i < SCAN_LADDER_SIZE; i++) { -+ rung = uksm_scan_ladder + i; -+ slot_tree_init_root(&rung->vma_root); -+ } -+ -+ init_performance_values(); -+ uksm_calc_scan_pages(); -+} -+ -+static inline int cal_positive_negative_costs(void) -+{ -+ struct page *p1, *p2; -+ unsigned char *addr1, *addr2; -+ unsigned long i, time_start, hash_cost; -+ unsigned long loopnum = 0; -+ -+ /*IMPORTANT: volatile is needed to prevent over-optimization by gcc. */ -+ volatile u32 hash; -+ volatile int ret; -+ -+ p1 = alloc_page(GFP_KERNEL); -+ if (!p1) -+ return -ENOMEM; -+ -+ p2 = alloc_page(GFP_KERNEL); -+ if (!p2) -+ return -ENOMEM; -+ -+ addr1 = kmap_atomic(p1); -+ addr2 = kmap_atomic(p2); -+ memset(addr1, prandom_u32(), PAGE_SIZE); -+ memcpy(addr2, addr1, PAGE_SIZE); -+ -+ /* make sure that the two pages differ in last byte */ -+ addr2[PAGE_SIZE-1] = ~addr2[PAGE_SIZE-1]; -+ kunmap_atomic(addr2); -+ kunmap_atomic(addr1); -+ -+ time_start = jiffies; -+ while (jiffies - time_start < 100) { -+ for (i = 0; i < 100; i++) -+ hash = page_hash(p1, HASH_STRENGTH_FULL, 0); -+ loopnum += 100; -+ } -+ hash_cost = (jiffies - time_start); -+ -+ time_start = jiffies; -+ for (i = 0; i < loopnum; i++) -+ ret = pages_identical(p1, p2); -+ memcmp_cost = HASH_STRENGTH_FULL * (jiffies - time_start); -+ memcmp_cost /= hash_cost; -+ pr_info("UKSM: relative memcmp_cost = %lu " -+ "hash=%u cmp_ret=%d.\n", -+ memcmp_cost, hash, ret); -+ -+ __free_page(p1); -+ __free_page(p2); -+ return 0; -+} -+ -+static int init_zeropage_hash_table(void) -+{ -+ struct page *page; -+ char *addr; -+ int i; -+ -+ page = alloc_page(GFP_KERNEL); -+ if (!page) -+ return -ENOMEM; -+ -+ addr = kmap_atomic(page); -+ memset(addr, 0, PAGE_SIZE); -+ kunmap_atomic(addr); -+ -+ zero_hash_table = kmalloc_array(HASH_STRENGTH_MAX, sizeof(u32), -+ GFP_KERNEL); -+ if (!zero_hash_table) -+ return -ENOMEM; -+ -+ for (i = 0; i < HASH_STRENGTH_MAX; i++) -+ zero_hash_table[i] = page_hash(page, i, 0); -+ -+ __free_page(page); -+ -+ return 0; -+} -+ -+static inline int init_random_sampling(void) -+{ -+ unsigned long i; -+ -+ random_nums = kmalloc(PAGE_SIZE, GFP_KERNEL); -+ if (!random_nums) -+ return -ENOMEM; -+ -+ for (i = 0; i < HASH_STRENGTH_FULL; i++) -+ random_nums[i] = i; -+ -+ for (i = 0; i < HASH_STRENGTH_FULL; i++) { -+ unsigned long rand_range, swap_index, tmp; -+ -+ rand_range = HASH_STRENGTH_FULL - i; -+ swap_index = i + prandom_u32() % rand_range; -+ tmp = random_nums[i]; -+ random_nums[i] = random_nums[swap_index]; -+ random_nums[swap_index] = tmp; -+ } -+ -+ rshash_state.state = RSHASH_NEW; -+ rshash_state.below_count = 0; -+ rshash_state.lookup_window_index = 0; -+ -+ return cal_positive_negative_costs(); -+} -+ -+static int __init uksm_slab_init(void) -+{ -+ rmap_item_cache = UKSM_KMEM_CACHE(rmap_item, 0); -+ if (!rmap_item_cache) -+ goto out; -+ -+ stable_node_cache = UKSM_KMEM_CACHE(stable_node, 0); -+ if (!stable_node_cache) -+ goto out_free1; -+ -+ node_vma_cache = UKSM_KMEM_CACHE(node_vma, 0); -+ if (!node_vma_cache) -+ goto out_free2; -+ -+ vma_slot_cache = UKSM_KMEM_CACHE(vma_slot, 0); -+ if (!vma_slot_cache) -+ goto out_free3; -+ -+ tree_node_cache = UKSM_KMEM_CACHE(tree_node, 0); -+ if (!tree_node_cache) -+ goto out_free4; -+ -+ return 0; -+ -+out_free4: -+ kmem_cache_destroy(vma_slot_cache); -+out_free3: -+ kmem_cache_destroy(node_vma_cache); -+out_free2: -+ kmem_cache_destroy(stable_node_cache); -+out_free1: -+ kmem_cache_destroy(rmap_item_cache); -+out: -+ return -ENOMEM; -+} -+ -+static void __init uksm_slab_free(void) -+{ -+ kmem_cache_destroy(stable_node_cache); -+ kmem_cache_destroy(rmap_item_cache); -+ kmem_cache_destroy(node_vma_cache); -+ kmem_cache_destroy(vma_slot_cache); -+ kmem_cache_destroy(tree_node_cache); -+} -+ -+/* Common interface to ksm, different to it. */ -+int ksm_madvise(struct vm_area_struct *vma, unsigned long start, -+ unsigned long end, int advice, unsigned long *vm_flags) -+{ -+ int err; -+ -+ switch (advice) { -+ case MADV_MERGEABLE: -+ return 0; /* just ignore the advice */ -+ -+ case MADV_UNMERGEABLE: -+ if (!(*vm_flags & VM_MERGEABLE) || !uksm_flags_can_scan(*vm_flags)) -+ return 0; /* just ignore the advice */ -+ -+ if (vma->anon_vma) { -+ err = unmerge_uksm_pages(vma, start, end); -+ if (err) -+ return err; -+ } -+ -+ uksm_remove_vma(vma); -+ *vm_flags &= ~VM_MERGEABLE; -+ break; -+ } -+ -+ return 0; -+} -+ -+/* Common interface to ksm, actually the same. */ -+struct page *ksm_might_need_to_copy(struct page *page, -+ struct vm_area_struct *vma, unsigned long address) -+{ -+ struct anon_vma *anon_vma = page_anon_vma(page); -+ struct page *new_page; -+ -+ if (PageKsm(page)) { -+ if (page_stable_node(page)) -+ return page; /* no need to copy it */ -+ } else if (!anon_vma) { -+ return page; /* no need to copy it */ -+ } else if (anon_vma->root == vma->anon_vma->root && -+ page->index == linear_page_index(vma, address)) { -+ return page; /* still no need to copy it */ -+ } -+ if (!PageUptodate(page)) -+ return page; /* let do_swap_page report the error */ -+ -+ new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, address); -+ if (new_page) { -+ copy_user_highpage(new_page, page, address, vma); -+ -+ SetPageDirty(new_page); -+ __SetPageUptodate(new_page); -+ __SetPageLocked(new_page); -+ } -+ -+ return new_page; -+} -+ -+static int __init uksm_init(void) -+{ -+ struct task_struct *uksm_thread; -+ int err; -+ -+ uksm_sleep_jiffies = msecs_to_jiffies(100); -+ uksm_sleep_saved = uksm_sleep_jiffies; -+ -+ slot_tree_init(); -+ init_scan_ladder(); -+ -+ -+ err = init_random_sampling(); -+ if (err) -+ goto out_free2; -+ -+ err = uksm_slab_init(); -+ if (err) -+ goto out_free1; -+ -+ err = init_zeropage_hash_table(); -+ if (err) -+ goto out_free0; -+ -+ uksm_thread = kthread_run(uksm_scan_thread, NULL, "uksmd"); -+ if (IS_ERR(uksm_thread)) { -+ pr_err("uksm: creating kthread failed\n"); -+ err = PTR_ERR(uksm_thread); -+ goto out_free; -+ } -+ -+#ifdef CONFIG_SYSFS -+ err = sysfs_create_group(mm_kobj, &uksm_attr_group); -+ if (err) { -+ pr_err("uksm: register sysfs failed\n"); -+ kthread_stop(uksm_thread); -+ goto out_free; -+ } -+#else -+ uksm_run = UKSM_RUN_MERGE; /* no way for user to start it */ -+ -+#endif /* CONFIG_SYSFS */ -+ -+#ifdef CONFIG_MEMORY_HOTREMOVE -+ /* -+ * Choose a high priority since the callback takes uksm_thread_mutex: -+ * later callbacks could only be taking locks which nest within that. -+ */ -+ hotplug_memory_notifier(uksm_memory_callback, 100); -+#endif -+ return 0; -+ -+out_free: -+ kfree(zero_hash_table); -+out_free0: -+ uksm_slab_free(); -+out_free1: -+ kfree(random_nums); -+out_free2: -+ kfree(uksm_scan_ladder); -+ return err; -+} -+ -+#ifdef MODULE -+subsys_initcall(ksm_init); -+#else -+late_initcall(uksm_init); -+#endif -+ -diff -Nur a/mm/vmstat.c b/mm/vmstat.c ---- a/mm/vmstat.c 2018-05-25 15:18:02.000000000 +0100 -+++ b/mm/vmstat.c 2018-05-26 19:30:55.791140570 +0100 -@@ -1091,6 +1091,9 @@ - "nr_dirtied", - "nr_written", - -+#ifdef CONFIG_UKSM -+ "nr_uksm_zero_pages", -+#endif - /* enum writeback_stat_item counters */ - "nr_dirty_threshold", - "nr_dirty_background_threshold", diff --git a/sys-kernel/linux-image-redcore-lts/linux-image-redcore-lts-4.14.95-r1.ebuild b/sys-kernel/linux-image-redcore-lts/linux-image-redcore-lts-4.14.95-r1.ebuild deleted file mode 100644 index 333a4b50..00000000 --- a/sys-kernel/linux-image-redcore-lts/linux-image-redcore-lts-4.14.95-r1.ebuild +++ /dev/null @@ -1,165 +0,0 @@ -# Copyright 1999-2017 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -EAPI=6 - -inherit eutils - -EXTRAVERSION="redcore-lts-r1" -KV_FULL="${PV}-${EXTRAVERSION}" -KV_MAJOR="4.14" - -DESCRIPTION="Official Redcore Linux Kernel Image" -HOMEPAGE="https://redcorelinux.org" -SRC_URI="https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz" - -KEYWORDS="amd64" -LICENSE="GPL-2" -SLOT="${PVR}" -IUSE="+cryptsetup +dmraid +dracut +dkms +mdadm" - -RESTRICT="binchecks strip mirror" -DEPEND=" - app-arch/lz4 - app-arch/xz-utils - sys-devel/autoconf - sys-devel/bc - sys-devel/make - cryptsetup? ( sys-fs/cryptsetup ) - dmraid? ( sys-fs/dmraid ) - dracut? ( >=sys-kernel/dracut-0.44-r8 ) - dkms? ( sys-kernel/dkms sys-kernel/linux-sources-redcore-lts:${SLOT} ) - mdadm? ( sys-fs/mdadm ) - >=sys-kernel/linux-firmware-20180314" -RDEPEND="${DEPEND}" - -PATCHES=( - "${FILESDIR}"/"${KV_MAJOR}"-introduce-NUMA-identity-node-sched-domain.patch - "${FILESDIR}"/"${KV_MAJOR}"-k10temp-add-ZEN-support.patch - "${FILESDIR}"/"${KV_MAJOR}"-mute-pps_state_mismatch.patch - "${FILESDIR}"/"${KV_MAJOR}"-restore-SD_PREFER_SIBLING-on-MC-domains.patch - "${FILESDIR}"/"${KV_MAJOR}"-Revert-ath10k-activate-user-space-firmware-loading.patch - "${FILESDIR}"/"${KV_MAJOR}"-linux-hardened.patch - "${FILESDIR}"/"${KV_MAJOR}"-uksm-linux-hardened.patch - "${FILESDIR}"/"${KV_MAJOR}"-0001-MuQSS-version-0.162-CPU-scheduler-linux-hardened.patch - "${FILESDIR}"/"${KV_MAJOR}"-0002-Make-preemptible-kernel-default.patch - "${FILESDIR}"/"${KV_MAJOR}"-0003-Expose-vmsplit-for-our-poor-32-bit-users.patch - "${FILESDIR}"/"${KV_MAJOR}"-0004-Create-highres-timeout-variants-of-schedule_timeout-.patch - "${FILESDIR}"/"${KV_MAJOR}"-0005-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch - "${FILESDIR}"/"${KV_MAJOR}"-0006-Convert-msleep-to-use-hrtimers-when-active.patch - "${FILESDIR}"/"${KV_MAJOR}"-0007-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch - "${FILESDIR}"/"${KV_MAJOR}"-0008-Replace-all-calls-to-schedule_timeout_interruptible-.patch - "${FILESDIR}"/"${KV_MAJOR}"-0009-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch - "${FILESDIR}"/"${KV_MAJOR}"-0010-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch - "${FILESDIR}"/"${KV_MAJOR}"-0011-Make-hrtimer-granularity-and-minimum-hrtimeout-confi.patch - "${FILESDIR}"/"${KV_MAJOR}"-0012-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch - "${FILESDIR}"/"${KV_MAJOR}"-0013-Make-threaded-IRQs-optionally-the-default-which-can-.patch - "${FILESDIR}"/"${KV_MAJOR}"-0014-Swap-sucks.patch - "${FILESDIR}"/"${KV_MAJOR}"-0015-MuQSS.c-needs-irq_regs.h-to-use-get_irq_regs.patch - "${FILESDIR}"/"${KV_MAJOR}"-0016-unfuck-MuQSS-on-linux-4_14_15+.patch - "${FILESDIR}"/"${KV_MAJOR}"-0017-unfuck-MuQSS-on-linux-4_14_75+.patch -) - -S="${WORKDIR}"/linux-"${PV}" - -pkg_setup() { - export KBUILD_BUILD_USER="nexus" - export KBUILD_BUILD_HOST="nexus.redcorelinux.org" - - export REAL_ARCH="$ARCH" - unset ARCH ; unset LDFLAGS #will interfere with Makefile if set -} - -src_prepare() { - default - emake mrproper - sed -ri "s|^(EXTRAVERSION =).*|\1 -${EXTRAVERSION}|" Makefile - cp "${FILESDIR}"/"${KV_MAJOR}"-amd64.config .config - rm -rf $(find . -type f|grep -F \.orig) -} - -src_compile() { - emake prepare modules_prepare bzImage modules -} - -src_install() { - dodir boot - insinto boot - newins .config config-"${KV_FULL}" - newins System.map System.map-"${KV_FULL}" - newins arch/x86/boot/bzImage vmlinuz-"${KV_FULL}" - - dodir usr/src/linux-"${KV_FULL}" - insinto usr/src/linux-"${KV_FULL}" - doins Module.symvers - doins System.map - exeinto usr/src/linux-"${KV_FULL}" - doexe vmlinux - - emake INSTALL_MOD_PATH="${D}" modules_install - - rm -f "${D}"lib/modules/"${KV_FULL}"/build - rm -f "${D}"lib/modules/"${KV_FULL}"/source - export local KSYMS - for KSYMS in build source ; do - dosym ../../../usr/src/linux-"${KV_FULL}" lib/modules/"${KV_FULL}"/"${KSYMS}" - done -} - -_grub2_update_grubcfg() { - if [[ -x $(which grub2-mkconfig) ]]; then - elog "Updating GRUB-2 bootloader configuration, please wait" - grub2-mkconfig -o "${ROOT}"boot/grub/grub.cfg - else - elog "It looks like you're not using GRUB-2, you must update bootloader configuration by hand" - fi -} - -_dracut_initrd_create() { - if [[ -x $(which dracut) ]]; then - elog "Generating initrd for "${KV_FULL}", please wait" - addpredict /etc/ld.so.cache~ - dracut -N -f --kver="${KV_FULL}" "${ROOT}"boot/initrd-"${KV_FULL}" - else - elog "It looks like you're not using dracut, you must generate an initrd by hand" - fi -} - -_dracut_initrd_delete() { - rm -rf "${ROOT}"boot/initrd-"${KV_FULL}" -} - -_dkms_modules_delete() { - if [[ -x $(which dkms) ]] ; then - export local DKMSMOD - for DKMSMOD in $(dkms status | cut -d " " -f1,2 | sed -e 's/,//g' | sed -e 's/ /\//g' | sed -e 's/://g') ; do - dkms remove "${DKMSMOD}" -k "${KV_FULL}" - done - fi -} - -_kernel_modules_delete() { - rm -rf "${ROOT}"lib/modules/"${KV_FULL}" -} - -pkg_postinst() { - if [ $(stat -c %d:%i /) == $(stat -c %d:%i /proc/1/root/.) ]; then - if use dracut; then - _dracut_initrd_create - fi - _grub2_update_grubcfg - fi -} - -pkg_postrm() { - if [ $(stat -c %d:%i /) == $(stat -c %d:%i /proc/1/root/.) ]; then - if use dracut; then - _dracut_initrd_delete - fi - _grub2_update_grubcfg - fi - if use dkms; then - _dkms_modules_delete - fi - _kernel_modules_delete -} diff --git a/sys-kernel/linux-image-redcore-lts/linux-image-redcore-lts-4.19.20-r1.ebuild b/sys-kernel/linux-image-redcore-lts/linux-image-redcore-lts-4.19.20-r1.ebuild deleted file mode 100644 index 19bc96c9..00000000 --- a/sys-kernel/linux-image-redcore-lts/linux-image-redcore-lts-4.19.20-r1.ebuild +++ /dev/null @@ -1,166 +0,0 @@ -# Copyright 1999-2017 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -EAPI=6 - -inherit eutils - -EXTRAVERSION="redcore-lts-r1" -KV_FULL="${PV}-${EXTRAVERSION}" -KV_MAJOR="4.19" - -DESCRIPTION="Official Redcore Linux Kernel Image" -HOMEPAGE="https://redcorelinux.org" -SRC_URI="https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz" - -KEYWORDS="amd64" -LICENSE="GPL-2" -SLOT="${PVR}" -IUSE="+cryptsetup +dmraid +dracut +dkms +mdadm" - -RESTRICT="binchecks strip mirror" -DEPEND=" - app-arch/lz4 - app-arch/xz-utils - sys-devel/autoconf - sys-devel/bc - sys-devel/make - cryptsetup? ( sys-fs/cryptsetup ) - dmraid? ( sys-fs/dmraid ) - dracut? ( >=sys-kernel/dracut-0.44-r8 ) - dkms? ( sys-kernel/dkms sys-kernel/linux-sources-redcore-lts:${SLOT} ) - mdadm? ( sys-fs/mdadm ) - >=sys-kernel/linux-firmware-20180314" -RDEPEND="${DEPEND}" - -PATCHES=( - "${FILESDIR}"/"${KV_MAJOR}"-ata-fix-NCQ-LOG-strings-and-move-to-debug.patch - "${FILESDIR}"/"${KV_MAJOR}"-ath10k-drop-WARN_ON-added-in-cd93b83ad927b2c7979e0add0343ace59328b461.patch - "${FILESDIR}"/"${KV_MAJOR}"-drop_ancient-and-wrong-msg.patch - "${FILESDIR}"/"${KV_MAJOR}"-enable_alx_wol.patch - "${FILESDIR}"/"${KV_MAJOR}"-mute-pps_state_mismatch.patch - "${FILESDIR}"/"${KV_MAJOR}"-nouveau-pascal-backlight.patch - "${FILESDIR}"/"${KV_MAJOR}"-radeon_dp_aux_transfer_native-no-ratelimited_debug.patch - "${FILESDIR}"/"${KV_MAJOR}"-revert-patches-causing-instant-reboot.patch - "${FILESDIR}"/"${KV_MAJOR}"-linux-hardened.patch - "${FILESDIR}"/"${KV_MAJOR}"-uksm-linux-hardened.patch - "${FILESDIR}"/"${KV_MAJOR}"-0001-MultiQueue-Skiplist-Scheduler-version-v0.180-linux-hardened.patch - "${FILESDIR}"/"${KV_MAJOR}"-0002-Fix-Werror-build-failure-in-tools.patch - "${FILESDIR}"/"${KV_MAJOR}"-0003-Make-preemptible-kernel-default.patch - "${FILESDIR}"/"${KV_MAJOR}"-0004-Expose-vmsplit-for-our-poor-32-bit-users.patch - "${FILESDIR}"/"${KV_MAJOR}"-0005-Create-highres-timeout-variants-of-schedule_timeout-.patch - "${FILESDIR}"/"${KV_MAJOR}"-0006-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch - "${FILESDIR}"/"${KV_MAJOR}"-0007-Convert-msleep-to-use-hrtimers-when-active.patch - "${FILESDIR}"/"${KV_MAJOR}"-0008-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch - "${FILESDIR}"/"${KV_MAJOR}"-0009-Replace-all-calls-to-schedule_timeout_interruptible-.patch - "${FILESDIR}"/"${KV_MAJOR}"-0010-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch - "${FILESDIR}"/"${KV_MAJOR}"-0011-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch - "${FILESDIR}"/"${KV_MAJOR}"-0012-Make-threaded-IRQs-optionally-the-default-which-can-.patch - "${FILESDIR}"/"${KV_MAJOR}"-0013-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch - "${FILESDIR}"/"${KV_MAJOR}"-0014-Swap-sucks.patch - "${FILESDIR}"/"${KV_MAJOR}"-0015-unfuck-MuQSS-on-linux-4_19_10+.patch -) - -S="${WORKDIR}"/linux-"${PV}" - -pkg_setup() { - export KBUILD_BUILD_USER="nexus" - export KBUILD_BUILD_HOST="nexus.redcorelinux.org" - - export REAL_ARCH="$ARCH" - unset ARCH ; unset LDFLAGS #will interfere with Makefile if set -} - -src_prepare() { - default - emake mrproper - sed -ri "s|^(EXTRAVERSION =).*|\1 -${EXTRAVERSION}|" Makefile - cp "${FILESDIR}"/"${KV_MAJOR}"-amd64.config .config - rm -rf $(find . -type f|grep -F \.orig) -} - -src_compile() { - emake prepare modules_prepare bzImage modules -} - -src_install() { - dodir boot - insinto boot - newins .config config-"${KV_FULL}" - newins System.map System.map-"${KV_FULL}" - newins arch/x86/boot/bzImage vmlinuz-"${KV_FULL}" - - dodir usr/src/linux-"${KV_FULL}" - insinto usr/src/linux-"${KV_FULL}" - doins Module.symvers - doins System.map - exeinto usr/src/linux-"${KV_FULL}" - doexe vmlinux - - emake INSTALL_MOD_PATH="${D}" modules_install - - rm -f "${D}"lib/modules/"${KV_FULL}"/build - rm -f "${D}"lib/modules/"${KV_FULL}"/source - export local KSYMS - for KSYMS in build source ; do - dosym ../../../usr/src/linux-"${KV_FULL}" lib/modules/"${KV_FULL}"/"${KSYMS}" - done -} - -_grub2_update_grubcfg() { - if [[ -x $(which grub2-mkconfig) ]]; then - elog "Updating GRUB-2 bootloader configuration, please wait" - grub2-mkconfig -o "${ROOT}"boot/grub/grub.cfg - else - elog "It looks like you're not using GRUB-2, you must update bootloader configuration by hand" - fi -} - -_dracut_initrd_create() { - if [[ -x $(which dracut) ]]; then - elog "Generating initrd for "${KV_FULL}", please wait" - addpredict /etc/ld.so.cache~ - dracut -N -f --kver="${KV_FULL}" "${ROOT}"boot/initrd-"${KV_FULL}" - else - elog "It looks like you're not using dracut, you must generate an initrd by hand" - fi -} - -_dracut_initrd_delete() { - rm -rf "${ROOT}"boot/initrd-"${KV_FULL}" -} - -_dkms_modules_delete() { - if [[ -x $(which dkms) ]] ; then - export local DKMSMOD - for DKMSMOD in $(dkms status | cut -d " " -f1,2 | sed -e 's/,//g' | sed -e 's/ /\//g' | sed -e 's/://g') ; do - dkms remove "${DKMSMOD}" -k "${KV_FULL}" - done - fi -} - -_kernel_modules_delete() { - rm -rf "${ROOT}"lib/modules/"${KV_FULL}" -} - -pkg_postinst() { - if [ $(stat -c %d:%i /) == $(stat -c %d:%i /proc/1/root/.) ]; then - if use dracut; then - _dracut_initrd_create - fi - _grub2_update_grubcfg - fi -} - -pkg_postrm() { - if [ $(stat -c %d:%i /) == $(stat -c %d:%i /proc/1/root/.) ]; then - if use dracut; then - _dracut_initrd_delete - fi - _grub2_update_grubcfg - fi - if use dkms; then - _dkms_modules_delete - fi - _kernel_modules_delete -} diff --git a/sys-kernel/linux-image-redcore-lts/linux-image-redcore-lts-4.19.20-r2.ebuild b/sys-kernel/linux-image-redcore-lts/linux-image-redcore-lts-4.19.20-r2.ebuild new file mode 100644 index 00000000..0e5c5507 --- /dev/null +++ b/sys-kernel/linux-image-redcore-lts/linux-image-redcore-lts-4.19.20-r2.ebuild @@ -0,0 +1,166 @@ +# Copyright 1999-2017 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +EAPI=6 + +inherit eutils + +EXTRAVERSION="redcore-lts-r2" +KV_FULL="${PV}-${EXTRAVERSION}" +KV_MAJOR="4.19" + +DESCRIPTION="Official Redcore Linux Kernel Image" +HOMEPAGE="https://redcorelinux.org" +SRC_URI="https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz" + +KEYWORDS="amd64" +LICENSE="GPL-2" +SLOT="${PVR}" +IUSE="+cryptsetup +dmraid +dracut +dkms +mdadm" + +RESTRICT="binchecks strip mirror" +DEPEND=" + app-arch/lz4 + app-arch/xz-utils + sys-devel/autoconf + sys-devel/bc + sys-devel/make + cryptsetup? ( sys-fs/cryptsetup ) + dmraid? ( sys-fs/dmraid ) + dracut? ( >=sys-kernel/dracut-0.44-r8 ) + dkms? ( sys-kernel/dkms sys-kernel/linux-sources-redcore-lts:${SLOT} ) + mdadm? ( sys-fs/mdadm ) + >=sys-kernel/linux-firmware-20180314" +RDEPEND="${DEPEND}" + +PATCHES=( + "${FILESDIR}"/"${KV_MAJOR}"-ata-fix-NCQ-LOG-strings-and-move-to-debug.patch + "${FILESDIR}"/"${KV_MAJOR}"-ath10k-drop-WARN_ON-added-in-cd93b83ad927b2c7979e0add0343ace59328b461.patch + "${FILESDIR}"/"${KV_MAJOR}"-drop_ancient-and-wrong-msg.patch + "${FILESDIR}"/"${KV_MAJOR}"-enable_alx_wol.patch + "${FILESDIR}"/"${KV_MAJOR}"-mute-pps_state_mismatch.patch + "${FILESDIR}"/"${KV_MAJOR}"-nouveau-pascal-backlight.patch + "${FILESDIR}"/"${KV_MAJOR}"-radeon_dp_aux_transfer_native-no-ratelimited_debug.patch + "${FILESDIR}"/"${KV_MAJOR}"-revert-patches-causing-instant-reboot.patch + "${FILESDIR}"/"${KV_MAJOR}"-linux-hardened.patch + "${FILESDIR}"/"${KV_MAJOR}"-uksm-linux-hardened.patch + "${FILESDIR}"/"${KV_MAJOR}"-0001-MultiQueue-Skiplist-Scheduler-version-v0.180-linux-hardened.patch + "${FILESDIR}"/"${KV_MAJOR}"-0002-Fix-Werror-build-failure-in-tools.patch + "${FILESDIR}"/"${KV_MAJOR}"-0003-Make-preemptible-kernel-default.patch + "${FILESDIR}"/"${KV_MAJOR}"-0004-Expose-vmsplit-for-our-poor-32-bit-users.patch + "${FILESDIR}"/"${KV_MAJOR}"-0005-Create-highres-timeout-variants-of-schedule_timeout-.patch + "${FILESDIR}"/"${KV_MAJOR}"-0006-Special-case-calls-of-schedule_timeout-1-to-use-the-.patch + "${FILESDIR}"/"${KV_MAJOR}"-0007-Convert-msleep-to-use-hrtimers-when-active.patch + "${FILESDIR}"/"${KV_MAJOR}"-0008-Replace-all-schedule-timeout-1-with-schedule_min_hrt.patch + "${FILESDIR}"/"${KV_MAJOR}"-0009-Replace-all-calls-to-schedule_timeout_interruptible-.patch + "${FILESDIR}"/"${KV_MAJOR}"-0010-Replace-all-calls-to-schedule_timeout_uninterruptibl.patch + "${FILESDIR}"/"${KV_MAJOR}"-0011-Don-t-use-hrtimer-overlay-when-pm_freezing-since-som.patch + "${FILESDIR}"/"${KV_MAJOR}"-0012-Make-threaded-IRQs-optionally-the-default-which-can-.patch + "${FILESDIR}"/"${KV_MAJOR}"-0013-Reinstate-default-Hz-of-100-in-combination-with-MuQS.patch + "${FILESDIR}"/"${KV_MAJOR}"-0014-Swap-sucks.patch + "${FILESDIR}"/"${KV_MAJOR}"-0015-unfuck-MuQSS-on-linux-4_19_10+.patch +) + +S="${WORKDIR}"/linux-"${PV}" + +pkg_setup() { + export KBUILD_BUILD_USER="nexus" + export KBUILD_BUILD_HOST="nexus.redcorelinux.org" + + export REAL_ARCH="$ARCH" + unset ARCH ; unset LDFLAGS #will interfere with Makefile if set +} + +src_prepare() { + default + emake mrproper + sed -ri "s|^(EXTRAVERSION =).*|\1 -${EXTRAVERSION}|" Makefile + cp "${FILESDIR}"/"${KV_MAJOR}"-amd64.config .config + rm -rf $(find . -type f|grep -F \.orig) +} + +src_compile() { + emake prepare modules_prepare bzImage modules +} + +src_install() { + dodir boot + insinto boot + newins .config config-"${KV_FULL}" + newins System.map System.map-"${KV_FULL}" + newins arch/x86/boot/bzImage vmlinuz-"${KV_FULL}" + + dodir usr/src/linux-"${KV_FULL}" + insinto usr/src/linux-"${KV_FULL}" + doins Module.symvers + doins System.map + exeinto usr/src/linux-"${KV_FULL}" + doexe vmlinux + + emake INSTALL_MOD_PATH="${D}" modules_install + + rm -f "${D}"lib/modules/"${KV_FULL}"/build + rm -f "${D}"lib/modules/"${KV_FULL}"/source + export local KSYMS + for KSYMS in build source ; do + dosym ../../../usr/src/linux-"${KV_FULL}" lib/modules/"${KV_FULL}"/"${KSYMS}" + done +} + +_grub2_update_grubcfg() { + if [[ -x $(which grub2-mkconfig) ]]; then + elog "Updating GRUB-2 bootloader configuration, please wait" + grub2-mkconfig -o "${ROOT}"boot/grub/grub.cfg + else + elog "It looks like you're not using GRUB-2, you must update bootloader configuration by hand" + fi +} + +_dracut_initrd_create() { + if [[ -x $(which dracut) ]]; then + elog "Generating initrd for "${KV_FULL}", please wait" + addpredict /etc/ld.so.cache~ + dracut -N -f --kver="${KV_FULL}" "${ROOT}"boot/initrd-"${KV_FULL}" + else + elog "It looks like you're not using dracut, you must generate an initrd by hand" + fi +} + +_dracut_initrd_delete() { + rm -rf "${ROOT}"boot/initrd-"${KV_FULL}" +} + +_dkms_modules_delete() { + if [[ -x $(which dkms) ]] ; then + export local DKMSMOD + for DKMSMOD in $(dkms status | cut -d " " -f1,2 | sed -e 's/,//g' | sed -e 's/ /\//g' | sed -e 's/://g') ; do + dkms remove "${DKMSMOD}" -k "${KV_FULL}" + done + fi +} + +_kernel_modules_delete() { + rm -rf "${ROOT}"lib/modules/"${KV_FULL}" +} + +pkg_postinst() { + if [ $(stat -c %d:%i /) == $(stat -c %d:%i /proc/1/root/.) ]; then + if use dracut; then + _dracut_initrd_create + fi + _grub2_update_grubcfg + fi +} + +pkg_postrm() { + if [ $(stat -c %d:%i /) == $(stat -c %d:%i /proc/1/root/.) ]; then + if use dracut; then + _dracut_initrd_delete + fi + _grub2_update_grubcfg + fi + if use dkms; then + _dkms_modules_delete + fi + _kernel_modules_delete +} -- cgit v1.2.3