From 5a01792340999d37435f5000a3f6b8e0f2d11815 Mon Sep 17 00:00:00 2001 From: BlackNoxis Date: Fri, 7 Nov 2014 12:54:17 +0200 Subject: Added the full elimination of sabayon-version --- dev-libs/openssl/Manifest | 2 + dev-libs/openssl/files/gentoo.config-1.0.1 | 160 +++++ .../openssl/files/openssl-1.0.0a-ldflags.patch | 23 + .../openssl/files/openssl-1.0.0d-windres.patch | 76 +++ .../openssl/files/openssl-1.0.0h-pkg-config.patch | 32 + .../files/openssl-1.0.1-parallel-build.patch | 354 +++++++++++ dev-libs/openssl/files/openssl-1.0.1-x32.patch | 79 +++ .../files/openssl-1.0.1e-bad-mac-aes-ni.patch | 35 ++ dev-libs/openssl/files/openssl-1.0.1e-ipv6.patch | 656 +++++++++++++++++++++ .../openssl/files/openssl-1.0.1e-perl-5.18.patch | 375 ++++++++++++ .../files/openssl-1.0.1e-rdrand-explicit.patch | 28 + .../files/openssl-1.0.1e-s_client-verify.patch | 18 + .../files/openssl-1.0.1e-tls-ver-crash.patch | 34 ++ .../openssl/files/openssl-1.0.1f-perl-5.18.patch | 356 +++++++++++ ...enssl-1.0.1f-revert-alpha-perl-generation.patch | 83 +++ dev-libs/openssl/metadata.xml | 13 + dev-libs/openssl/openssl-1.0.1g-r1.ebuild | 261 ++++++++ 17 files changed, 2585 insertions(+) create mode 100644 dev-libs/openssl/Manifest create mode 100755 dev-libs/openssl/files/gentoo.config-1.0.1 create mode 100644 dev-libs/openssl/files/openssl-1.0.0a-ldflags.patch create mode 100644 dev-libs/openssl/files/openssl-1.0.0d-windres.patch create mode 100644 dev-libs/openssl/files/openssl-1.0.0h-pkg-config.patch create mode 100644 dev-libs/openssl/files/openssl-1.0.1-parallel-build.patch create mode 100644 dev-libs/openssl/files/openssl-1.0.1-x32.patch create mode 100644 dev-libs/openssl/files/openssl-1.0.1e-bad-mac-aes-ni.patch create mode 100644 dev-libs/openssl/files/openssl-1.0.1e-ipv6.patch create mode 100644 dev-libs/openssl/files/openssl-1.0.1e-perl-5.18.patch create mode 100644 dev-libs/openssl/files/openssl-1.0.1e-rdrand-explicit.patch create mode 100644 dev-libs/openssl/files/openssl-1.0.1e-s_client-verify.patch create mode 100644 dev-libs/openssl/files/openssl-1.0.1e-tls-ver-crash.patch create mode 100644 dev-libs/openssl/files/openssl-1.0.1f-perl-5.18.patch create mode 100644 dev-libs/openssl/files/openssl-1.0.1f-revert-alpha-perl-generation.patch create mode 100644 dev-libs/openssl/metadata.xml create mode 100644 dev-libs/openssl/openssl-1.0.1g-r1.ebuild (limited to 'dev-libs/openssl') diff --git a/dev-libs/openssl/Manifest b/dev-libs/openssl/Manifest new file mode 100644 index 00000000..ccf2ca86 --- /dev/null +++ b/dev-libs/openssl/Manifest @@ -0,0 +1,2 @@ +DIST openssl-1.0.1g.tar.gz 4509047 SHA256 53cb818c3b90e507a8348f4f5eaedb05d8bfe5358aabb508b7263cc670c3e028 SHA512 66ebbad3c8ad98a07b486d39d0c3ae62b00133f8f2877cf8b97c461e7c7f40b29cf9c3cae82cf73a92dcf1daa63d33aa76c910fbcbe60158589fc7cb48f41e6d WHIRLPOOL 6bfb30d1f41b051f794e2eb80ad9116b064f6d464c22698538c4e16b85739b80744387ca160fd1a86b92814b5b1b3fc7d0658a709942b7b31b198da8cce37056 +DIST openssl-c_rehash.sh.1.7 4167 SHA256 4999ee79892f52bd6a4a7baba9fac62262454d573bbffd72685d3aae9e48cee0 SHA512 55e8c2e827750a4f375cb83c86bfe2d166c01ffa5d7e9b16657b72b38b747c8985dd2c98f854c911dfbbee2ff3e92aff39fdf089d979b2e3534b7685ee8b80da WHIRLPOOL c88f06a3b8651f76b6289552cccceb64e13f6697c5f0ce3ff114c781ce1c218912b8ee308af9d087cd76a9600fdacda1953175bff07d7d3eb21b0c0b7f4f1ce1 diff --git a/dev-libs/openssl/files/gentoo.config-1.0.1 b/dev-libs/openssl/files/gentoo.config-1.0.1 new file mode 100755 index 00000000..bbc1aa95 --- /dev/null +++ b/dev-libs/openssl/files/gentoo.config-1.0.1 @@ -0,0 +1,160 @@ +#!/usr/bin/env bash +# Copyright 1999-2013 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/dev-libs/openssl/files/gentoo.config-1.0.1,v 1.1 2013/05/21 17:53:19 vapier Exp $ +# +# Openssl doesn't play along nicely with cross-compiling +# like autotools based projects, so let's teach it new tricks. +# +# Review the bundled 'config' script to see why kind of targets +# we can pass to the 'Configure' script. + + +# Testing routines +if [[ $1 == "test" ]] ; then + for c in \ + "arm-gentoo-linux-uclibc |linux-generic32 -DL_ENDIAN" \ + "armv5b-linux-gnu |linux-armv4 -DB_ENDIAN" \ + "x86_64-pc-linux-gnu |linux-x86_64" \ + "alpha-linux-gnu |linux-alpha-gcc" \ + "alphaev56-unknown-linux-gnu |linux-alpha+bwx-gcc" \ + "i686-pc-linux-gnu |linux-elf" \ + "whatever-gentoo-freebsdX.Y |BSD-generic32" \ + "i686-gentoo-freebsdX.Y |BSD-x86-elf" \ + "sparc64-alpha-freebsdX.Y |BSD-sparc64" \ + "ia64-gentoo-freebsd5.99234 |BSD-ia64" \ + "x86_64-gentoo-freebsdX.Y |BSD-x86_64" \ + "hppa64-aldsF-linux-gnu5.3 |linux-generic32 -DB_ENDIAN" \ + "powerpc-gentOO-linux-uclibc |linux-ppc" \ + "powerpc64-unk-linux-gnu |linux-ppc64" \ + "x86_64-apple-darwinX |darwin64-x86_64-cc" \ + "powerpc64-apple-darwinX |darwin64-ppc-cc" \ + "i686-apple-darwinX |darwin-i386-cc" \ + "i386-apple-darwinX |darwin-i386-cc" \ + "powerpc-apple-darwinX |darwin-ppc-cc" \ + "i586-pc-winnt |winnt-parity" \ + "s390-ibm-linux-gnu |linux-generic32 -DB_ENDIAN" \ + "s390x-linux-gnu |linux64-s390x" \ + ;do + CHOST=${c/|*} + ret_want=${c/*|} + ret_got=$(CHOST=${CHOST} "$0") + + if [[ ${ret_want} == "${ret_got}" ]] ; then + echo "PASS: ${CHOST}" + else + echo "FAIL: ${CHOST}" + echo -e "\twanted: ${ret_want}" + echo -e "\twe got: ${ret_got}" + fi + done + exit 0 +fi +[[ -z ${CHOST} && -n $1 ]] && CHOST=$1 + + +# Detect the operating system +case ${CHOST} in + *-aix*) system="aix";; + *-darwin*) system="darwin";; + *-freebsd*) system="BSD";; + *-hpux*) system="hpux";; + *-linux*) system="linux";; + *-solaris*) system="solaris";; + *-winnt*) system="winnt";; + x86_64-*-mingw*) system="mingw64";; + *mingw*) system="mingw";; + *) exit 0;; +esac + + +# Compiler munging +compiler="gcc" +if [[ ${CC} == "ccc" ]] ; then + compiler=${CC} +fi + + +# Detect target arch +machine="" +chost_machine=${CHOST%%-*} +case ${system} in +linux) + case ${chost_machine}:${ABI} in + alphaev56*|\ + alphaev[678]*)machine=alpha+bwx-${compiler};; + alpha*) machine=alpha-${compiler};; + armv[4-9]*b*) machine="armv4 -DB_ENDIAN";; + armv[4-9]*) machine="armv4 -DL_ENDIAN";; + arm*b*) machine="generic32 -DB_ENDIAN";; + arm*) machine="generic32 -DL_ENDIAN";; + avr*) machine="generic32 -DL_ENDIAN";; + bfin*) machine="generic32 -DL_ENDIAN";; + # hppa64*) machine=parisc64;; + hppa*) machine="generic32 -DB_ENDIAN";; + i[0-9]86*|\ + x86_64*:x86) machine=elf;; + ia64*) machine=ia64;; + m68*) machine="generic32 -DB_ENDIAN";; + mips*el*) machine="generic32 -DL_ENDIAN";; + mips*) machine="generic32 -DB_ENDIAN";; + powerpc64*) machine=ppc64;; + powerpc*) machine=ppc;; + # sh64*) machine=elf;; + sh*b*) machine="generic32 -DB_ENDIAN";; + sh*) machine="generic32 -DL_ENDIAN";; + sparc*v7*) machine="generic32 -DB_ENDIAN";; + sparc64*) machine=sparcv9;; + sparc*) machine=sparcv8;; + s390x*) machine=s390x system=linux64;; + s390*) machine="generic32 -DB_ENDIAN";; + x86_64*:x32) machine=x32;; + x86_64*) machine=x86_64;; + esac + ;; +BSD) + case ${chost_machine} in + alpha*) machine=generic64;; + i[6-9]86*) machine=x86-elf;; + ia64*) machine=ia64;; + sparc64*) machine=sparc64;; + x86_64*) machine=x86_64;; + *) machine=generic32;; + esac + ;; +aix) + machine=${compiler} + ;; +darwin) + case ${chost_machine} in + powerpc64) machine=ppc-cc; system=${system}64;; + powerpc) machine=ppc-cc;; + i?86*) machine=i386-cc;; + x86_64) machine=x86_64-cc; system=${system}64;; + esac + ;; +hpux) + case ${chost_machine} in + ia64) machine=ia64-${compiler} ;; + esac + ;; +solaris) + case ${chost_machine} in + i386) machine=x86-${compiler} ;; + x86_64*) machine=x86_64-${compiler}; system=${system}64;; + sparcv9*) machine=sparcv9-${compiler}; system=${system}64;; + sparc*) machine=sparcv8-${compiler};; + esac + ;; +winnt) + machine=parity + ;; +mingw*) + # special case ... no xxx-yyy style name + echo ${system} + ;; +esac + + +# If we have something, show it +[[ -n ${machine} ]] && echo ${system}-${machine} diff --git a/dev-libs/openssl/files/openssl-1.0.0a-ldflags.patch b/dev-libs/openssl/files/openssl-1.0.0a-ldflags.patch new file mode 100644 index 00000000..c0b3bc3f --- /dev/null +++ b/dev-libs/openssl/files/openssl-1.0.0a-ldflags.patch @@ -0,0 +1,23 @@ +http://bugs.gentoo.org/327421 + +--- Makefile.org ++++ Makefile.org +@@ -189,6 +189,7 @@ + MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \ + DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)' \ + MAKEDEPPROG='$(MAKEDEPPROG)' \ ++ LDFLAGS='${LDFLAGS}' \ + SHARED_LDFLAGS='$(SHARED_LDFLAGS)' \ + KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)' \ + ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)' \ +--- Makefile.shared ++++ Makefile.shared +@@ -153,7 +153,7 @@ + NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \ + SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX" + +-DO_GNU_APP=LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)" ++DO_GNU_APP=LDFLAGS="$(LDFLAGS) $(CFLAGS)" + + #This is rather special. It's a special target with which one can link + #applications without bothering with any features that have anything to diff --git a/dev-libs/openssl/files/openssl-1.0.0d-windres.patch b/dev-libs/openssl/files/openssl-1.0.0d-windres.patch new file mode 100644 index 00000000..3f889807 --- /dev/null +++ b/dev-libs/openssl/files/openssl-1.0.0d-windres.patch @@ -0,0 +1,76 @@ +URL: http://rt.openssl.org/Ticket/Display.html?id=2558 +Subject: make windres controllable via build env var settings + +atm, the windres code in openssl is only usable via the cross-compile prefix +option unlike all the other build tools. so add support for the standard $RC +/ $WINDRES env vars as well. + +Index: Configure +=================================================================== +RCS file: /usr/local/src/openssl/CVSROOT/openssl/Configure,v +retrieving revision 1.621.2.40 +diff -u -p -r1.621.2.40 Configure +--- Configure 30 Nov 2010 22:19:26 -0000 1.621.2.40 ++++ Configure 4 Jul 2011 23:12:32 -0000 +@@ -1094,6 +1094,7 @@ my $shared_extension = $fields[$idx_shar + my $ranlib = $ENV{'RANLIB'} || $fields[$idx_ranlib]; + my $ar = $ENV{'AR'} || "ar"; + my $arflags = $fields[$idx_arflags]; ++my $windres = $ENV{'RC'} || $ENV{'WINDRES'} || "windres"; + my $multilib = $fields[$idx_multilib]; + + # if $prefix/lib$multilib is not an existing directory, then +@@ -1511,12 +1512,14 @@ while () + s/^AR=\s*/AR= \$\(CROSS_COMPILE\)/; + s/^NM=\s*/NM= \$\(CROSS_COMPILE\)/; + s/^RANLIB=\s*/RANLIB= \$\(CROSS_COMPILE\)/; ++ s/^WINDRES=\s*/WINDRES= \$\(CROSS_COMPILE\)/; + s/^MAKEDEPPROG=.*$/MAKEDEPPROG= \$\(CROSS_COMPILE\)$cc/ if $cc eq "gcc"; + } + else { + s/^CC=.*$/CC= $cc/; + s/^AR=\s*ar/AR= $ar/; + s/^RANLIB=.*/RANLIB= $ranlib/; ++ s/^WINDRES=.*/WINDRES= $windres/; + s/^MAKEDEPPROG=.*$/MAKEDEPPROG= $cc/ if $cc eq "gcc"; + } + s/^CFLAG=.*$/CFLAG= $cflags/; +Index: Makefile.org +=================================================================== +RCS file: /usr/local/src/openssl/CVSROOT/openssl/Makefile.org,v +retrieving revision 1.295.2.10 +diff -u -p -r1.295.2.10 Makefile.org +--- Makefile.org 27 Jan 2010 16:06:58 -0000 1.295.2.10 ++++ Makefile.org 4 Jul 2011 23:13:08 -0000 +@@ -66,6 +66,7 @@ EXE_EXT= + ARFLAGS= + AR=ar $(ARFLAGS) r + RANLIB= ranlib ++WINDRES= windres + NM= nm + PERL= perl + TAR= tar +@@ -180,6 +181,7 @@ BUILDENV= PLATFORM='$(PLATFORM)' PROCESS + CC='$(CC)' CFLAG='$(CFLAG)' \ + AS='$(CC)' ASFLAG='$(CFLAG) -c' \ + AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)' \ ++ WINDRES='$(WINDRES)' \ + CROSS_COMPILE='$(CROSS_COMPILE)' \ + PERL='$(PERL)' ENGDIRS='$(ENGDIRS)' \ + SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)' \ +Index: Makefile.shared +=================================================================== +RCS file: /usr/local/src/openssl/CVSROOT/openssl/Makefile.shared,v +retrieving revision 1.72.2.4 +diff -u -p -r1.72.2.4 Makefile.shared +--- Makefile.shared 21 Aug 2010 11:36:49 -0000 1.72.2.4 ++++ Makefile.shared 4 Jul 2011 23:13:52 -0000 +@@ -293,7 +293,7 @@ link_a.cygwin: + fi; \ + dll_name=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \ + $(PERL) util/mkrc.pl $$dll_name | \ +- $(CROSS_COMPILE)windres -o rc.o; \ ++ $(WINDRES) -o rc.o; \ + extras="$$extras rc.o"; \ + ALLSYMSFLAGS='-Wl,--whole-archive'; \ + NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \ diff --git a/dev-libs/openssl/files/openssl-1.0.0h-pkg-config.patch b/dev-libs/openssl/files/openssl-1.0.0h-pkg-config.patch new file mode 100644 index 00000000..6c021825 --- /dev/null +++ b/dev-libs/openssl/files/openssl-1.0.0h-pkg-config.patch @@ -0,0 +1,32 @@ +depend on other pc files rather than encoding library info directly in +every pkg-config file + +--- a/Makefile.org ++++ b/Makefile.org +@@ -335,11 +335,11 @@ libssl.pc: Makefile + echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \ + echo 'includedir=$${prefix}/include'; \ + echo ''; \ +- echo 'Name: OpenSSL'; \ ++ echo 'Name: OpenSSL-libssl'; \ + echo 'Description: Secure Sockets Layer and cryptography libraries'; \ + echo 'Version: '$(VERSION); \ +- echo 'Requires: '; \ +- echo 'Libs: -L$${libdir} -lssl -lcrypto'; \ ++ echo 'Requires.private: libcrypto'; \ ++ echo 'Libs: -L$${libdir} -lssl'; \ + echo 'Libs.private: $(EX_LIBS)'; \ + echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc + +@@ -352,10 +353,7 @@ openssl.pc: Makefile + echo 'Name: OpenSSL'; \ + echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \ + echo 'Version: '$(VERSION); \ +- echo 'Requires: '; \ +- echo 'Libs: -L$${libdir} -lssl -lcrypto'; \ +- echo 'Libs.private: $(EX_LIBS)'; \ +- echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc ++ echo 'Requires: libssl libcrypto' ) > openssl.pc + + Makefile: Makefile.org Configure config + @echo "Makefile is older than Makefile.org, Configure or config." diff --git a/dev-libs/openssl/files/openssl-1.0.1-parallel-build.patch b/dev-libs/openssl/files/openssl-1.0.1-parallel-build.patch new file mode 100644 index 00000000..19f859ab --- /dev/null +++ b/dev-libs/openssl/files/openssl-1.0.1-parallel-build.patch @@ -0,0 +1,354 @@ +http://rt.openssl.org/Ticket/Display.html?id=2084 + +--- a/Makefile.org ++++ b/Makefile.org +@@ -247,17 +247,17 @@ + build_libs: build_crypto build_ssl build_engines + + build_crypto: +- @dir=crypto; target=all; $(BUILD_ONE_CMD) ++ +@dir=crypto; target=all; $(BUILD_ONE_CMD) +-build_ssl: ++build_ssl: build_crypto +- @dir=ssl; target=all; $(BUILD_ONE_CMD) ++ +@dir=ssl; target=all; $(BUILD_ONE_CMD) +-build_engines: ++build_engines: build_crypto +- @dir=engines; target=all; $(BUILD_ONE_CMD) ++ +@dir=engines; target=all; $(BUILD_ONE_CMD) +-build_apps: ++build_apps: build_libs +- @dir=apps; target=all; $(BUILD_ONE_CMD) ++ +@dir=apps; target=all; $(BUILD_ONE_CMD) +-build_tests: ++build_tests: build_libs +- @dir=test; target=all; $(BUILD_ONE_CMD) ++ +@dir=test; target=all; $(BUILD_ONE_CMD) +-build_tools: ++build_tools: build_libs +- @dir=tools; target=all; $(BUILD_ONE_CMD) ++ +@dir=tools; target=all; $(BUILD_ONE_CMD) + + all_testapps: build_libs build_testapps + build_testapps: +@@ -497,9 +497,9 @@ + dist_pem_h: + (cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean) + +-install: all install_docs install_sw ++install: install_docs install_sw + +-install_sw: ++install_dirs: + @$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \ + $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \ + $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \ +@@ -508,6 +508,13 @@ + $(INSTALL_PREFIX)$(OPENSSLDIR)/misc \ + $(INSTALL_PREFIX)$(OPENSSLDIR)/certs \ + $(INSTALL_PREFIX)$(OPENSSLDIR)/private ++ @$(PERL) $(TOP)/util/mkdir-p.pl \ ++ $(INSTALL_PREFIX)$(MANDIR)/man1 \ ++ $(INSTALL_PREFIX)$(MANDIR)/man3 \ ++ $(INSTALL_PREFIX)$(MANDIR)/man5 \ ++ $(INSTALL_PREFIX)$(MANDIR)/man7 ++ ++install_sw: install_dirs + @set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\ + do \ + (cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \ +@@ -511,7 +511,7 @@ + (cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \ + chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \ + done; +- @set -e; target=install; $(RECURSIVE_BUILD_CMD) ++ +@set -e; target=install; $(RECURSIVE_BUILD_CMD) + @set -e; liblist="$(LIBS)"; for i in $$liblist ;\ + do \ + if [ -f "$$i" ]; then \ +@@ -593,12 +600,7 @@ + done; \ + done + +-install_docs: +- @$(PERL) $(TOP)/util/mkdir-p.pl \ +- $(INSTALL_PREFIX)$(MANDIR)/man1 \ +- $(INSTALL_PREFIX)$(MANDIR)/man3 \ +- $(INSTALL_PREFIX)$(MANDIR)/man5 \ +- $(INSTALL_PREFIX)$(MANDIR)/man7 ++install_docs: install_dirs + @pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \ + here="`pwd`"; \ + filecase=; \ +--- a/Makefile.shared ++++ b/Makefile.shared +@@ -105,6 +105,7 @@ LINK_SO= \ + SHAREDFLAGS="$${SHAREDFLAGS:-$(CFLAGS) $(SHARED_LDFLAGS)}"; \ + LIBPATH=`for x in $$LIBDEPS; do echo $$x; done | sed -e 's/^ *-L//;t' -e d | uniq`; \ + LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \ ++ [ -e $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX ] && exit 0; \ + LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \ + $${SHAREDCMD} $${SHAREDFLAGS} \ + -o $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX \ +@@ -122,6 +124,7 @@ SYMLINK_SO= \ + done; \ + fi; \ + if [ -n "$$SHLIB_SOVER" ]; then \ ++ [ -e "$$SHLIB$$SHLIB_SUFFIX" ] || \ + ( $(SET_X); rm -f $$SHLIB$$SHLIB_SUFFIX; \ + ln -s $$prev $$SHLIB$$SHLIB_SUFFIX ); \ + fi; \ +--- a/crypto/Makefile ++++ b/crypto/Makefile +@@ -85,11 +85,11 @@ + @if [ -z "$(THIS)" ]; then $(MAKE) -f $(TOP)/Makefile reflect THIS=$@; fi + + subdirs: +- @target=all; $(RECURSIVE_MAKE) ++ +@target=all; $(RECURSIVE_MAKE) + + files: + $(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO +- @target=files; $(RECURSIVE_MAKE) ++ +@target=files; $(RECURSIVE_MAKE) + + links: + @$(PERL) $(TOP)/util/mklink.pl ../include/openssl $(EXHEADER) +@@ -100,7 +100,7 @@ + # lib: $(LIB): are splitted to avoid end-less loop + lib: $(LIB) + @touch lib +-$(LIB): $(LIBOBJ) ++$(LIB): $(LIBOBJ) | subdirs + $(AR) $(LIB) $(LIBOBJ) + $(RANLIB) $(LIB) || echo Never mind. + +@@ -110,7 +110,7 @@ + fi + + libs: +- @target=lib; $(RECURSIVE_MAKE) ++ +@target=lib; $(RECURSIVE_MAKE) + + install: + @[ -n "$(INSTALLTOP)" ] # should be set by top Makefile... +@@ -119,7 +119,7 @@ + (cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \ + chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \ + done; +- @target=install; $(RECURSIVE_MAKE) ++ +@target=install; $(RECURSIVE_MAKE) + + lint: + @target=lint; $(RECURSIVE_MAKE) +--- a/engines/Makefile ++++ b/engines/Makefile +@@ -72,7 +72,7 @@ + + all: lib subdirs + +-lib: $(LIBOBJ) ++lib: $(LIBOBJ) | subdirs + @if [ -n "$(SHARED_LIBS)" ]; then \ + set -e; \ + for l in $(LIBNAMES); do \ +@@ -89,7 +89,7 @@ + + subdirs: + echo $(EDIRS) +- @target=all; $(RECURSIVE_MAKE) ++ +@target=all; $(RECURSIVE_MAKE) + + files: + $(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO +@@ -128,7 +128,7 @@ + mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines/$$pfx$$l$$sfx.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines/$$pfx$$l$$sfx ); \ + done; \ + fi +- @target=install; $(RECURSIVE_MAKE) ++ +@target=install; $(RECURSIVE_MAKE) + + tags: + ctags $(SRC) +--- a/test/Makefile ++++ b/test/Makefile +@@ -123,7 +123,7 @@ + tags: + ctags $(SRC) + +-tests: exe apps $(TESTS) ++tests: exe $(TESTS) + + apps: + @(cd ..; $(MAKE) DIRS=apps all) +@@ -365,109 +365,109 @@ + link_app.$${shlib_target} + + $(RSATEST)$(EXE_EXT): $(RSATEST).o $(DLIBCRYPTO) +- @target=$(RSATEST); $(BUILD_CMD) ++ +@target=$(RSATEST); $(BUILD_CMD) + + $(BNTEST)$(EXE_EXT): $(BNTEST).o $(DLIBCRYPTO) +- @target=$(BNTEST); $(BUILD_CMD) ++ +@target=$(BNTEST); $(BUILD_CMD) + + $(ECTEST)$(EXE_EXT): $(ECTEST).o $(DLIBCRYPTO) +- @target=$(ECTEST); $(BUILD_CMD) ++ +@target=$(ECTEST); $(BUILD_CMD) + + $(EXPTEST)$(EXE_EXT): $(EXPTEST).o $(DLIBCRYPTO) +- @target=$(EXPTEST); $(BUILD_CMD) ++ +@target=$(EXPTEST); $(BUILD_CMD) + + $(IDEATEST)$(EXE_EXT): $(IDEATEST).o $(DLIBCRYPTO) +- @target=$(IDEATEST); $(BUILD_CMD) ++ +@target=$(IDEATEST); $(BUILD_CMD) + + $(MD2TEST)$(EXE_EXT): $(MD2TEST).o $(DLIBCRYPTO) +- @target=$(MD2TEST); $(BUILD_CMD) ++ +@target=$(MD2TEST); $(BUILD_CMD) + + $(SHATEST)$(EXE_EXT): $(SHATEST).o $(DLIBCRYPTO) +- @target=$(SHATEST); $(BUILD_CMD) ++ +@target=$(SHATEST); $(BUILD_CMD) + + $(SHA1TEST)$(EXE_EXT): $(SHA1TEST).o $(DLIBCRYPTO) +- @target=$(SHA1TEST); $(BUILD_CMD) ++ +@target=$(SHA1TEST); $(BUILD_CMD) + + $(SHA256TEST)$(EXE_EXT): $(SHA256TEST).o $(DLIBCRYPTO) +- @target=$(SHA256TEST); $(BUILD_CMD) ++ +@target=$(SHA256TEST); $(BUILD_CMD) + + $(SHA512TEST)$(EXE_EXT): $(SHA512TEST).o $(DLIBCRYPTO) +- @target=$(SHA512TEST); $(BUILD_CMD) ++ +@target=$(SHA512TEST); $(BUILD_CMD) + + $(RMDTEST)$(EXE_EXT): $(RMDTEST).o $(DLIBCRYPTO) +- @target=$(RMDTEST); $(BUILD_CMD) ++ +@target=$(RMDTEST); $(BUILD_CMD) + + $(MDC2TEST)$(EXE_EXT): $(MDC2TEST).o $(DLIBCRYPTO) +- @target=$(MDC2TEST); $(BUILD_CMD) ++ +@target=$(MDC2TEST); $(BUILD_CMD) + + $(MD4TEST)$(EXE_EXT): $(MD4TEST).o $(DLIBCRYPTO) +- @target=$(MD4TEST); $(BUILD_CMD) ++ +@target=$(MD4TEST); $(BUILD_CMD) + + $(MD5TEST)$(EXE_EXT): $(MD5TEST).o $(DLIBCRYPTO) +- @target=$(MD5TEST); $(BUILD_CMD) ++ +@target=$(MD5TEST); $(BUILD_CMD) + + $(HMACTEST)$(EXE_EXT): $(HMACTEST).o $(DLIBCRYPTO) +- @target=$(HMACTEST); $(BUILD_CMD) ++ +@target=$(HMACTEST); $(BUILD_CMD) + + $(WPTEST)$(EXE_EXT): $(WPTEST).o $(DLIBCRYPTO) +- @target=$(WPTEST); $(BUILD_CMD) ++ +@target=$(WPTEST); $(BUILD_CMD) + + $(RC2TEST)$(EXE_EXT): $(RC2TEST).o $(DLIBCRYPTO) +- @target=$(RC2TEST); $(BUILD_CMD) ++ +@target=$(RC2TEST); $(BUILD_CMD) + + $(BFTEST)$(EXE_EXT): $(BFTEST).o $(DLIBCRYPTO) +- @target=$(BFTEST); $(BUILD_CMD) ++ +@target=$(BFTEST); $(BUILD_CMD) + + $(CASTTEST)$(EXE_EXT): $(CASTTEST).o $(DLIBCRYPTO) +- @target=$(CASTTEST); $(BUILD_CMD) ++ +@target=$(CASTTEST); $(BUILD_CMD) + + $(RC4TEST)$(EXE_EXT): $(RC4TEST).o $(DLIBCRYPTO) +- @target=$(RC4TEST); $(BUILD_CMD) ++ +@target=$(RC4TEST); $(BUILD_CMD) + + $(RC5TEST)$(EXE_EXT): $(RC5TEST).o $(DLIBCRYPTO) +- @target=$(RC5TEST); $(BUILD_CMD) ++ +@target=$(RC5TEST); $(BUILD_CMD) + + $(DESTEST)$(EXE_EXT): $(DESTEST).o $(DLIBCRYPTO) +- @target=$(DESTEST); $(BUILD_CMD) ++ +@target=$(DESTEST); $(BUILD_CMD) + + $(RANDTEST)$(EXE_EXT): $(RANDTEST).o $(DLIBCRYPTO) +- @target=$(RANDTEST); $(BUILD_CMD) ++ +@target=$(RANDTEST); $(BUILD_CMD) + + $(DHTEST)$(EXE_EXT): $(DHTEST).o $(DLIBCRYPTO) +- @target=$(DHTEST); $(BUILD_CMD) ++ +@target=$(DHTEST); $(BUILD_CMD) + + $(DSATEST)$(EXE_EXT): $(DSATEST).o $(DLIBCRYPTO) +- @target=$(DSATEST); $(BUILD_CMD) ++ +@target=$(DSATEST); $(BUILD_CMD) + + $(METHTEST)$(EXE_EXT): $(METHTEST).o $(DLIBCRYPTO) +- @target=$(METHTEST); $(BUILD_CMD) ++ +@target=$(METHTEST); $(BUILD_CMD) + + $(SSLTEST)$(EXE_EXT): $(SSLTEST).o $(DLIBSSL) $(DLIBCRYPTO) +- @target=$(SSLTEST); $(FIPS_BUILD_CMD) ++ +@target=$(SSLTEST); $(FIPS_BUILD_CMD) + + $(ENGINETEST)$(EXE_EXT): $(ENGINETEST).o $(DLIBCRYPTO) +- @target=$(ENGINETEST); $(BUILD_CMD) ++ +@target=$(ENGINETEST); $(BUILD_CMD) + + $(EVPTEST)$(EXE_EXT): $(EVPTEST).o $(DLIBCRYPTO) +- @target=$(EVPTEST); $(BUILD_CMD) ++ +@target=$(EVPTEST); $(BUILD_CMD) + + $(ECDSATEST)$(EXE_EXT): $(ECDSATEST).o $(DLIBCRYPTO) +- @target=$(ECDSATEST); $(BUILD_CMD) ++ +@target=$(ECDSATEST); $(BUILD_CMD) + + $(ECDHTEST)$(EXE_EXT): $(ECDHTEST).o $(DLIBCRYPTO) +- @target=$(ECDHTEST); $(BUILD_CMD) ++ +@target=$(ECDHTEST); $(BUILD_CMD) + + $(IGETEST)$(EXE_EXT): $(IGETEST).o $(DLIBCRYPTO) +- @target=$(IGETEST); $(BUILD_CMD) ++ +@target=$(IGETEST); $(BUILD_CMD) + + $(JPAKETEST)$(EXE_EXT): $(JPAKETEST).o $(DLIBCRYPTO) +- @target=$(JPAKETEST); $(BUILD_CMD) ++ +@target=$(JPAKETEST); $(BUILD_CMD) + + $(ASN1TEST)$(EXE_EXT): $(ASN1TEST).o $(DLIBCRYPTO) +- @target=$(ASN1TEST); $(BUILD_CMD) ++ +@target=$(ASN1TEST); $(BUILD_CMD) + + $(SRPTEST)$(EXE_EXT): $(SRPTEST).o $(DLIBCRYPTO) +- @target=$(SRPTEST); $(BUILD_CMD) ++ +@target=$(SRPTEST); $(BUILD_CMD) + + #$(AESTEST).o: $(AESTEST).c + # $(CC) -c $(CFLAGS) -DINTERMEDIATE_VALUE_KAT -DTRACE_KAT_MCT $(AESTEST).c +@@ -480,7 +480,7 @@ + # fi + + dummytest$(EXE_EXT): dummytest.o $(DLIBCRYPTO) +- @target=dummytest; $(BUILD_CMD) ++ +@target=dummytest; $(BUILD_CMD) + + # DO NOT DELETE THIS LINE -- make depend depends on it. + +--- a/crypto/objects/Makefile ++++ b/crypto/objects/Makefile +@@ -44,11 +44,11 @@ obj_dat.h: obj_dat.pl obj_mac.h + # objects.pl both reads and writes obj_mac.num + obj_mac.h: objects.pl objects.txt obj_mac.num + $(PERL) objects.pl objects.txt obj_mac.num obj_mac.h +- @sleep 1; touch obj_mac.h; sleep 1 + +-obj_xref.h: objxref.pl obj_xref.txt obj_mac.num ++# This doesn't really need obj_mac.h, but since that rule reads & writes ++# obj_mac.num, we can't run in parallel with it. ++obj_xref.h: objxref.pl obj_xref.txt obj_mac.num obj_mac.h + $(PERL) objxref.pl obj_mac.num obj_xref.txt > obj_xref.h +- @sleep 1; touch obj_xref.h; sleep 1 + + files: + $(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO diff --git a/dev-libs/openssl/files/openssl-1.0.1-x32.patch b/dev-libs/openssl/files/openssl-1.0.1-x32.patch new file mode 100644 index 00000000..5106cb6e --- /dev/null +++ b/dev-libs/openssl/files/openssl-1.0.1-x32.patch @@ -0,0 +1,79 @@ +http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=51bfed2e26fc13a66e8b5710aa2ce1d7a04af721 + +UpstreamStatus: Pending + +Received from H J Liu @ Intel +Make the assembly syntax compatible with x32 gcc. Othewise x32 gcc throws errors. +Signed-Off-By: Nitin A Kamble 2011/07/13 + +ported the patch to the 1.0.0e version +Signed-Off-By: Nitin A Kamble 2011/12/01 +Index: openssl-1.0.0e/Configure +=================================================================== +--- openssl-1.0.0e.orig/Configure ++++ openssl-1.0.0e/Configure +@@ -393,6 +393,7 @@ my %table=( + "debug-linux-generic32","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DTERMIO -g -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", + "debug-linux-generic64","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DTERMIO -g -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", + "debug-linux-x86_64","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -m64 -DL_ENDIAN -DTERMIO -g -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64", ++"linux-x32", "gcc:-DL_ENDIAN -DTERMIO -O2 -pipe -g -feliminate-unused-debug-types -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-mx32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", + "dist", "cc:-O::(unknown)::::::", + + # Basic configs that should work on any (32 and less bit) box +Index: openssl-1.0.0e/crypto/bn/asm/x86_64-gcc.c +=================================================================== +--- openssl-1.0.0e.orig/crypto/bn/asm/x86_64-gcc.c ++++ openssl-1.0.0e/crypto/bn/asm/x86_64-gcc.c +@@ -55,7 +55,7 @@ + * machine. + */ + +-#ifdef _WIN64 ++#if defined _WIN64 || !defined __LP64__ + #define BN_ULONG unsigned long long + #else + #define BN_ULONG unsigned long +@@ -192,9 +192,9 @@ BN_ULONG bn_add_words (BN_ULONG *rp, con + asm ( + " subq %2,%2 \n" + ".p2align 4 \n" +- "1: movq (%4,%2,8),%0 \n" +- " adcq (%5,%2,8),%0 \n" +- " movq %0,(%3,%2,8) \n" ++ "1: movq (%q4,%2,8),%0 \n" ++ " adcq (%q5,%2,8),%0 \n" ++ " movq %0,(%q3,%2,8) \n" + " leaq 1(%2),%2 \n" + " loop 1b \n" + " sbbq %0,%0 \n" +@@ -215,9 +215,9 @@ BN_ULONG bn_sub_words (BN_ULONG *rp, con + asm ( + " subq %2,%2 \n" + ".p2align 4 \n" +- "1: movq (%4,%2,8),%0 \n" +- " sbbq (%5,%2,8),%0 \n" +- " movq %0,(%3,%2,8) \n" ++ "1: movq (%q4,%2,8),%0 \n" ++ " sbbq (%q5,%2,8),%0 \n" ++ " movq %0,(%q3,%2,8) \n" + " leaq 1(%2),%2 \n" + " loop 1b \n" + " sbbq %0,%0 \n" +Index: openssl-1.0.0e/crypto/bn/bn.h +=================================================================== +--- openssl-1.0.0e.orig/crypto/bn/bn.h ++++ openssl-1.0.0e/crypto/bn/bn.h +@@ -172,6 +172,13 @@ extern "C" { + # endif + #endif + ++/* Address type. */ ++#ifdef _WIN64 ++#define BN_ADDR unsigned long long ++#else ++#define BN_ADDR unsigned long ++#endif ++ + /* assuming long is 64bit - this is the DEC Alpha + * unsigned long long is only 64 bits :-(, don't define + * BN_LLONG for the DEC Alpha */ diff --git a/dev-libs/openssl/files/openssl-1.0.1e-bad-mac-aes-ni.patch b/dev-libs/openssl/files/openssl-1.0.1e-bad-mac-aes-ni.patch new file mode 100644 index 00000000..4422a62c --- /dev/null +++ b/dev-libs/openssl/files/openssl-1.0.1e-bad-mac-aes-ni.patch @@ -0,0 +1,35 @@ +https://bugs.gentoo.org/463444 + +From 9ab3ce124616cb12bd39c6aa1e1bde0f46969b29 Mon Sep 17 00:00:00 2001 +From: Andy Polyakov +Date: Mon, 18 Mar 2013 19:29:41 +0100 +Subject: [PATCH] e_aes_cbc_hmac_sha1.c: fix rare bad record mac on AES-NI + plaforms. + +PR: 3002 +(cherry picked from commit 5c60046553716fcf160718f59160493194f212dc) +--- + crypto/evp/e_aes_cbc_hmac_sha1.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +diff --git a/crypto/evp/e_aes_cbc_hmac_sha1.c b/crypto/evp/e_aes_cbc_hmac_sha1.c +index 483e04b..fb2c884 100644 +--- a/crypto/evp/e_aes_cbc_hmac_sha1.c ++++ b/crypto/evp/e_aes_cbc_hmac_sha1.c +@@ -328,10 +328,11 @@ static int aesni_cbc_hmac_sha1_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out, + + if (res!=SHA_CBLOCK) continue; + +- mask = 0-((inp_len+8-j)>>(sizeof(j)*8-1)); ++ /* j is not incremented yet */ ++ mask = 0-((inp_len+7-j)>>(sizeof(j)*8-1)); + data->u[SHA_LBLOCK-1] |= bitlen&mask; + sha1_block_data_order(&key->md,data,1); +- mask &= 0-((j-inp_len-73)>>(sizeof(j)*8-1)); ++ mask &= 0-((j-inp_len-72)>>(sizeof(j)*8-1)); + pmac->u[0] |= key->md.h0 & mask; + pmac->u[1] |= key->md.h1 & mask; + pmac->u[2] |= key->md.h2 & mask; +-- +1.8.2.1 + diff --git a/dev-libs/openssl/files/openssl-1.0.1e-ipv6.patch b/dev-libs/openssl/files/openssl-1.0.1e-ipv6.patch new file mode 100644 index 00000000..521cfb5e --- /dev/null +++ b/dev-libs/openssl/files/openssl-1.0.1e-ipv6.patch @@ -0,0 +1,656 @@ +http://rt.openssl.org/Ticket/Display.html?id=2051 +user/pass: guest/guest + +Index: apps/s_apps.h +=================================================================== +RCS file: /v/openssl/cvs/openssl/apps/s_apps.h,v +retrieving revision 1.21.2.1 +diff -u -r1.21.2.1 s_apps.h +--- apps/s_apps.h 4 Sep 2009 17:42:04 -0000 1.21.2.1 ++++ apps/s_apps.h 28 Dec 2011 00:28:14 -0000 +@@ -148,7 +148,7 @@ + #define PORT_STR "4433" + #define PROTOCOL "tcp" + +-int do_server(int port, int type, int *ret, int (*cb) (char *hostname, int s, unsigned char *context), unsigned char *context); ++int do_server(int port, int type, int *ret, int (*cb) (char *hostname, int s, unsigned char *context), unsigned char *context, int use_ipv4, int use_ipv6); + #ifdef HEADER_X509_H + int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx); + #endif +@@ -156,7 +156,7 @@ + int set_cert_stuff(SSL_CTX *ctx, char *cert_file, char *key_file); + int set_cert_key_stuff(SSL_CTX *ctx, X509 *cert, EVP_PKEY *key); + #endif +-int init_client(int *sock, char *server, int port, int type); ++int init_client(int *sock, char *server, int port, int type, int use_ipv4, int use_ipv6); + int should_retry(int i); + int extract_port(char *str, short *port_ptr); + int extract_host_port(char *str,char **host_ptr,unsigned char *ip,short *p); +Index: apps/s_client.c +=================================================================== +RCS file: /v/openssl/cvs/openssl/apps/s_client.c,v +retrieving revision 1.123.2.6.2.10 +diff -u -r1.123.2.6.2.10 s_client.c +--- apps/s_client.c 14 Dec 2011 22:18:02 -0000 1.123.2.6.2.10 ++++ apps/s_client.c 28 Dec 2011 00:28:14 -0000 +@@ -285,6 +285,10 @@ + { + BIO_printf(bio_err,"usage: s_client args\n"); + BIO_printf(bio_err,"\n"); ++ BIO_printf(bio_err," -4 - use IPv4 only\n"); ++#if OPENSSL_USE_IPV6 ++ BIO_printf(bio_err," -6 - use IPv6 only\n"); ++#endif + BIO_printf(bio_err," -host host - use -connect instead\n"); + BIO_printf(bio_err," -port port - use -connect instead\n"); + BIO_printf(bio_err," -connect host:port - who to connect to (default is %s:%s)\n",SSL_HOST_NAME,PORT_STR); +@@ -564,6 +567,7 @@ + int sbuf_len,sbuf_off; + fd_set readfds,writefds; + short port=PORT; ++ int use_ipv4, use_ipv6; + int full_log=1; + char *host=SSL_HOST_NAME; + char *cert_file=NULL,*key_file=NULL; +@@ -609,7 +613,11 @@ + #endif + char *sess_in = NULL; + char *sess_out = NULL; +- struct sockaddr peer; ++#if OPENSSL_USE_IPV6 ++ struct sockaddr_storage peer; ++#else ++ struct sockaddr_in peer; ++#endif + int peerlen = sizeof(peer); + int enable_timeouts = 0 ; + long socket_mtu = 0; +@@ -630,6 +638,12 @@ + meth=SSLv2_client_method(); + #endif + ++ use_ipv4 = 1; ++#if OPENSSL_USE_IPV6 ++ use_ipv6 = 1; ++#else ++ use_ipv6 = 0; ++#endif + apps_startup(); + c_Pause=0; + c_quiet=0; +@@ -951,6 +961,18 @@ + jpake_secret = *++argv; + } + #endif ++ else if (strcmp(*argv,"-4") == 0) ++ { ++ use_ipv4 = 1; ++ use_ipv6 = 0; ++ } ++#if OPENSSL_USE_IPV6 ++ else if (strcmp(*argv,"-6") == 0) ++ { ++ use_ipv4 = 0; ++ use_ipv6 = 1; ++ } ++#endif + #ifndef OPENSSL_NO_SRTP + else if (strcmp(*argv,"-use_srtp") == 0) + { +@@ -1259,7 +1276,7 @@ + + re_start: + +- if (init_client(&s,host,port,socket_type) == 0) ++ if (init_client(&s,host,port,socket_type,use_ipv4,use_ipv6) == 0) + { + BIO_printf(bio_err,"connect:errno=%d\n",get_last_socket_error()); + SHUTDOWN(s); +@@ -1285,7 +1302,7 @@ + { + + sbio=BIO_new_dgram(s,BIO_NOCLOSE); +- if (getsockname(s, &peer, (void *)&peerlen) < 0) ++ if (getsockname(s, (struct sockaddr *)&peer, (void *)&peerlen) < 0) + { + BIO_printf(bio_err, "getsockname:errno=%d\n", + get_last_socket_error()); +=================================================================== +RCS file: /v/openssl/cvs/openssl/apps/s_server.c,v +retrieving revision 1.136.2.15.2.13 +diff -u -r1.136.2.15.2.13 s_server.c +--- apps/s_server.c 27 Dec 2011 14:23:22 -0000 1.136.2.15.2.13 ++++ apps/s_server.c 28 Dec 2011 00:28:14 -0000 +@@ -558,6 +558,10 @@ + # endif + BIO_printf(bio_err," -use_srtp profiles - Offer SRTP key management with a colon-separated profile list"); + #endif ++ BIO_printf(bio_err," -4 - use IPv4 only\n"); ++#if OPENSSL_USE_IPV6 ++ BIO_printf(bio_err," -6 - use IPv6 only\n"); ++#endif + BIO_printf(bio_err," -keymatexport label - Export keying material using label\n"); + BIO_printf(bio_err," -keymatexportlen len - Export len bytes of keying material (default 20)\n"); + } +@@ -943,6 +947,7 @@ + int state=0; + const SSL_METHOD *meth=NULL; + int socket_type=SOCK_STREAM; ++ int use_ipv4, use_ipv6; + ENGINE *e=NULL; + char *inrand=NULL; + int s_cert_format = FORMAT_PEM, s_key_format = FORMAT_PEM; +@@ -981,6 +986,12 @@ + /* #error no SSL version enabled */ + #endif + ++ use_ipv4 = 1; ++#if OPENSSL_USE_IPV6 ++ use_ipv6 = 1; ++#else ++ use_ipv6 = 0; ++#endif + local_argc=argc; + local_argv=argv; + +@@ -1329,6 +1340,18 @@ + jpake_secret = *(++argv); + } + #endif ++ else if (strcmp(*argv,"-4") == 0) ++ { ++ use_ipv4 = 1; ++ use_ipv6 = 0; ++ } ++#if OPENSSL_USE_IPV6 ++ else if (strcmp(*argv,"-6") == 0) ++ { ++ use_ipv4 = 0; ++ use_ipv6 = 1; ++ } ++#endif + #ifndef OPENSSL_NO_SRTP + else if (strcmp(*argv,"-use_srtp") == 0) + { +@@ -1884,9 +1907,9 @@ + BIO_printf(bio_s_out,"ACCEPT\n"); + (void)BIO_flush(bio_s_out); + if (www) +- do_server(port,socket_type,&accept_socket,www_body, context); ++ do_server(port,socket_type,&accept_socket,www_body, context, use_ipv4, use_ipv6); + else +- do_server(port,socket_type,&accept_socket,sv_body, context); ++ do_server(port,socket_type,&accept_socket,sv_body, context, use_ipv4, use_ipv6); + print_stats(bio_s_out,ctx); + ret=0; + end: +Index: apps/s_socket.c +=================================================================== +RCS file: /v/openssl/cvs/openssl/apps/s_socket.c,v +retrieving revision 1.43.2.3.2.2 +diff -u -r1.43.2.3.2.2 s_socket.c +--- apps/s_socket.c 2 Dec 2011 14:39:40 -0000 1.43.2.3.2.2 ++++ apps/s_socket.c 28 Dec 2011 00:28:14 -0000 +@@ -97,16 +97,16 @@ + #include "netdb.h" + #endif + +-static struct hostent *GetHostByName(char *name); ++static struct hostent *GetHostByName(char *name, int domain); + #if defined(OPENSSL_SYS_WINDOWS) || (defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK)) + static void ssl_sock_cleanup(void); + #endif + static int ssl_sock_init(void); +-static int init_client_ip(int *sock,unsigned char ip[4], int port, int type); +-static int init_server(int *sock, int port, int type); +-static int init_server_long(int *sock, int port,char *ip, int type); ++static int init_client_ip(int *sock,unsigned char *ip, int port, int type, int domain); ++static int init_server(int *sock, int port, int type, int use_ipv4, int use_ipv6); ++static int init_server_long(int *sock, int port,char *ip, int type, int use_ipv4, int use_ipv6); + static int do_accept(int acc_sock, int *sock, char **host); +-static int host_ip(char *str, unsigned char ip[4]); ++static int host_ip(char *str, unsigned char *ip, int domain); + + #ifdef OPENSSL_SYS_WIN16 + #define SOCKET_PROTOCOL 0 /* more microsoft stupidity */ +@@ -234,38 +234,68 @@ + return(1); + } + +-int init_client(int *sock, char *host, int port, int type) ++int init_client(int *sock, char *host, int port, int type, int use_ipv4, int use_ipv6) + { ++#if OPENSSL_USE_IPV6 ++ unsigned char ip[16]; ++#else + unsigned char ip[4]; ++#endif + +- memset(ip, '\0', sizeof ip); +- if (!host_ip(host,&(ip[0]))) +- return 0; +- return init_client_ip(sock,ip,port,type); +- } +- +-static int init_client_ip(int *sock, unsigned char ip[4], int port, int type) +- { +- unsigned long addr; ++ if (use_ipv4) ++ if (host_ip(host,ip,AF_INET)) ++ return(init_client_ip(sock,ip,port,type,AF_INET)); ++#if OPENSSL_USE_IPV6 ++ if (use_ipv6) ++ if (host_ip(host,ip,AF_INET6)) ++ return(init_client_ip(sock,ip,port,type,AF_INET6)); ++#endif ++ return 0; ++ } ++ ++static int init_client_ip(int *sock, unsigned char ip[4], int port, int type, int domain) ++ { ++#if OPENSSL_USE_IPV6 ++ struct sockaddr_storage them; ++ struct sockaddr_in *them_in = (struct sockaddr_in *)&them; ++ struct sockaddr_in6 *them_in6 = (struct sockaddr_in6 *)&them; ++#else + struct sockaddr_in them; ++ struct sockaddr_in *them_in = &them; ++#endif ++ socklen_t addr_len; + int s,i; + + if (!ssl_sock_init()) return(0); + + memset((char *)&them,0,sizeof(them)); +- them.sin_family=AF_INET; +- them.sin_port=htons((unsigned short)port); +- addr=(unsigned long) +- ((unsigned long)ip[0]<<24L)| +- ((unsigned long)ip[1]<<16L)| +- ((unsigned long)ip[2]<< 8L)| +- ((unsigned long)ip[3]); +- them.sin_addr.s_addr=htonl(addr); ++ if (domain == AF_INET) ++ { ++ addr_len = (socklen_t)sizeof(struct sockaddr_in); ++ them_in->sin_family=AF_INET; ++ them_in->sin_port=htons((unsigned short)port); ++#ifndef BIT_FIELD_LIMITS ++ memcpy(&them_in->sin_addr.s_addr, ip, 4); ++#else ++ memcpy(&them_in->sin_addr, ip, 4); ++#endif ++ } ++ else ++#if OPENSSL_USE_IPV6 ++ { ++ addr_len = (socklen_t)sizeof(struct sockaddr_in6); ++ them_in6->sin6_family=AF_INET6; ++ them_in6->sin6_port=htons((unsigned short)port); ++ memcpy(&(them_in6->sin6_addr), ip, sizeof(struct in6_addr)); ++ } ++#else ++ return(0); ++#endif + + if (type == SOCK_STREAM) +- s=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL); ++ s=socket(domain,SOCK_STREAM,SOCKET_PROTOCOL); + else /* ( type == SOCK_DGRAM) */ +- s=socket(AF_INET,SOCK_DGRAM,IPPROTO_UDP); ++ s=socket(domain,SOCK_DGRAM,IPPROTO_UDP); + + if (s == INVALID_SOCKET) { perror("socket"); return(0); } + +@@ -277,29 +315,27 @@ + if (i < 0) { perror("keepalive"); return(0); } + } + #endif +- +- if (connect(s,(struct sockaddr *)&them,sizeof(them)) == -1) ++ if (connect(s,(struct sockaddr *)&them,addr_len) == -1) + { closesocket(s); perror("connect"); return(0); } + *sock=s; + return(1); + } + +-int do_server(int port, int type, int *ret, int (*cb)(char *hostname, int s, unsigned char *context), unsigned char *context) ++int do_server(int port, int type, int *ret, int (*cb)(char *hostname, int s, unsigned char *context), unsigned char *context, int use_ipv4, int use_ipv6) + { + int sock; + char *name = NULL; + int accept_socket = 0; + int i; + +- if (!init_server(&accept_socket,port,type)) return(0); +- ++ if (!init_server(&accept_socket,port,type, use_ipv4, use_ipv6)) return(0); + if (ret != NULL) + { + *ret=accept_socket; + /* return(1);*/ + } +- for (;;) +- { ++ for (;;) ++ { + if (type==SOCK_STREAM) + { + if (do_accept(accept_socket,&sock,&name) == 0) +@@ -322,41 +358,88 @@ + } + } + +-static int init_server_long(int *sock, int port, char *ip, int type) ++static int init_server_long(int *sock, int port, char *ip, int type, int use_ipv4, int use_ipv6) + { + int ret=0; ++ int domain; ++#if OPENSSL_USE_IPV6 ++ struct sockaddr_storage server; ++ struct sockaddr_in *server_in = (struct sockaddr_in *)&server; ++ struct sockaddr_in6 *server_in6 = (struct sockaddr_in6 *)&server; ++#else + struct sockaddr_in server; ++ struct sockaddr_in *server_in = &server; ++#endif ++ socklen_t addr_len; + int s= -1; + ++ if (!use_ipv4 && !use_ipv6) ++ goto err; ++#if OPENSSL_USE_IPV6 ++ /* we are fine here */ ++#else ++ if (use_ipv6) ++ goto err; ++#endif + if (!ssl_sock_init()) return(0); + +- memset((char *)&server,0,sizeof(server)); +- server.sin_family=AF_INET; +- server.sin_port=htons((unsigned short)port); +- if (ip == NULL) +- server.sin_addr.s_addr=INADDR_ANY; +- else +-/* Added for T3E, address-of fails on bit field (beckman@acl.lanl.gov) */ +-#ifndef BIT_FIELD_LIMITS +- memcpy(&server.sin_addr.s_addr,ip,4); ++#if OPENSSL_USE_IPV6 ++ domain = use_ipv6 ? AF_INET6 : AF_INET; + #else +- memcpy(&server.sin_addr,ip,4); ++ domain = AF_INET; + #endif +- +- if (type == SOCK_STREAM) +- s=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL); +- else /* type == SOCK_DGRAM */ +- s=socket(AF_INET, SOCK_DGRAM,IPPROTO_UDP); ++ if (type == SOCK_STREAM) ++ s=socket(domain,SOCK_STREAM,SOCKET_PROTOCOL); ++ else /* type == SOCK_DGRAM */ ++ s=socket(domain, SOCK_DGRAM,IPPROTO_UDP); + + if (s == INVALID_SOCKET) goto err; + #if defined SOL_SOCKET && defined SO_REUSEADDR ++ { ++ int j = 1; ++ setsockopt(s, SOL_SOCKET, SO_REUSEADDR, ++ (void *) &j, sizeof j); ++ } ++#endif ++#if OPENSSL_USE_IPV6 ++ if ((use_ipv4 == 0) && (use_ipv6 == 1)) + { +- int j = 1; +- setsockopt(s, SOL_SOCKET, SO_REUSEADDR, +- (void *) &j, sizeof j); ++ const int on = 1; ++ ++ setsockopt(s, IPPROTO_IPV6, IPV6_V6ONLY, ++ (const void *) &on, sizeof(int)); + } + #endif +- if (bind(s,(struct sockaddr *)&server,sizeof(server)) == -1) ++ if (domain == AF_INET) ++ { ++ addr_len = (socklen_t)sizeof(struct sockaddr_in); ++ memset(server_in, 0, sizeof(struct sockaddr_in)); ++ server_in->sin_family=AF_INET; ++ server_in->sin_port = htons((unsigned short)port); ++ if (ip == NULL) ++ server_in->sin_addr.s_addr = htonl(INADDR_ANY); ++ else ++/* Added for T3E, address-of fails on bit field (beckman@acl.lanl.gov) */ ++#ifndef BIT_FIELD_LIMITS ++ memcpy(&server_in->sin_addr.s_addr, ip, 4); ++#else ++ memcpy(&server_in->sin_addr, ip, 4); ++#endif ++ } ++#if OPENSSL_USE_IPV6 ++ else ++ { ++ addr_len = (socklen_t)sizeof(struct sockaddr_in6); ++ memset(server_in6, 0, sizeof(struct sockaddr_in6)); ++ server_in6->sin6_family = AF_INET6; ++ server_in6->sin6_port = htons((unsigned short)port); ++ if (ip == NULL) ++ server_in6->sin6_addr = in6addr_any; ++ else ++ memcpy(&server_in6->sin6_addr, ip, sizeof(struct in6_addr)); ++ } ++#endif ++ if (bind(s, (struct sockaddr *)&server, addr_len) == -1) + { + #ifndef OPENSSL_SYS_WINDOWS + perror("bind"); +@@ -375,16 +458,23 @@ + return(ret); + } + +-static int init_server(int *sock, int port, int type) ++static int init_server(int *sock, int port, int type, int use_ipv4, int use_ipv6) + { +- return(init_server_long(sock, port, NULL, type)); ++ return(init_server_long(sock, port, NULL, type, use_ipv4, use_ipv6)); + } + + static int do_accept(int acc_sock, int *sock, char **host) + { + int ret; + struct hostent *h1,*h2; +- static struct sockaddr_in from; ++#if OPENSSL_USE_IPV6 ++ struct sockaddr_storage from; ++ struct sockaddr_in *from_in = (struct sockaddr_in *)&from; ++ struct sockaddr_in6 *from_in6 = (struct sockaddr_in6 *)&from; ++#else ++ struct sockaddr_in from; ++ struct sockaddr_in *from_in = &from; ++#endif + int len; + /* struct linger ling; */ + +@@ -431,13 +521,23 @@ + */ + + if (host == NULL) goto end; ++#if OPENSSL_USE_IPV6 ++ if (from.ss_family == AF_INET) ++#else ++ if (from.sin_family == AF_INET) ++#endif + #ifndef BIT_FIELD_LIMITS +- /* I should use WSAAsyncGetHostByName() under windows */ +- h1=gethostbyaddr((char *)&from.sin_addr.s_addr, +- sizeof(from.sin_addr.s_addr),AF_INET); ++ /* I should use WSAAsyncGetHostByName() under windows */ ++ h1=gethostbyaddr((char *)&from_in->sin_addr.s_addr, ++ sizeof(from_in->sin_addr.s_addr), AF_INET); + #else +- h1=gethostbyaddr((char *)&from.sin_addr, +- sizeof(struct in_addr),AF_INET); ++ h1=gethostbyaddr((char *)&from_in->sin_addr, ++ sizeof(struct in_addr), AF_INET); ++#endif ++#if OPENSSL_USE_IPV6 ++ else ++ h1=gethostbyaddr((char *)&from_in6->sin6_addr, ++ sizeof(struct in6_addr), AF_INET6); + #endif + if (h1 == NULL) + { +@@ -454,15 +554,23 @@ + } + BUF_strlcpy(*host,h1->h_name,strlen(h1->h_name)+1); + +- h2=GetHostByName(*host); ++#if OPENSSL_USE_IPV6 ++ h2=GetHostByName(*host, from.ss_family); ++#else ++ h2=GetHostByName(*host, from.sin_family); ++#endif + if (h2 == NULL) + { + BIO_printf(bio_err,"gethostbyname failure\n"); + return(0); + } +- if (h2->h_addrtype != AF_INET) ++#if OPENSSL_USE_IPV6 ++ if (h2->h_addrtype != from.ss_family) ++#else ++ if (h2->h_addrtype != from.sin_family) ++#endif + { +- BIO_printf(bio_err,"gethostbyname addr is not AF_INET\n"); ++ BIO_printf(bio_err,"gethostbyname addr address is not correct\n"); + return(0); + } + } +@@ -477,7 +585,7 @@ + char *h,*p; + + h=str; +- p=strchr(str,':'); ++ p=strrchr(str,':'); + if (p == NULL) + { + BIO_printf(bio_err,"no port defined\n"); +@@ -485,7 +593,7 @@ + } + *(p++)='\0'; + +- if ((ip != NULL) && !host_ip(str,ip)) ++ if ((ip != NULL) && !host_ip(str,ip,AF_INET)) + goto err; + if (host_ptr != NULL) *host_ptr=h; + +@@ -496,48 +604,58 @@ + return(0); + } + +-static int host_ip(char *str, unsigned char ip[4]) ++static int host_ip(char *str, unsigned char *ip, int domain) + { +- unsigned int in[4]; ++ unsigned int in[4]; ++ unsigned long l; + int i; + +- if (sscanf(str,"%u.%u.%u.%u",&(in[0]),&(in[1]),&(in[2]),&(in[3])) == 4) ++ if ((domain == AF_INET) && ++ (sscanf(str,"%u.%u.%u.%u",&(in[0]),&(in[1]),&(in[2]),&(in[3])) == 4)) + { ++ + for (i=0; i<4; i++) + if (in[i] > 255) + { + BIO_printf(bio_err,"invalid IP address\n"); + goto err; + } +- ip[0]=in[0]; +- ip[1]=in[1]; +- ip[2]=in[2]; +- ip[3]=in[3]; +- } ++ l=htonl((in[0]<<24L)|(in[1]<<16L)|(in[2]<<8L)|in[3]); ++ memcpy(ip, &l, 4); ++ return 1; ++ } ++#if OPENSSL_USE_IPV6 ++ else if ((domain == AF_INET6) && ++ (inet_pton(AF_INET6, str, ip) == 1)) ++ return 1; ++#endif + else + { /* do a gethostbyname */ + struct hostent *he; + + if (!ssl_sock_init()) return(0); + +- he=GetHostByName(str); ++ he=GetHostByName(str,domain); + if (he == NULL) + { + BIO_printf(bio_err,"gethostbyname failure\n"); + goto err; + } + /* cast to short because of win16 winsock definition */ +- if ((short)he->h_addrtype != AF_INET) ++ if ((short)he->h_addrtype != domain) + { +- BIO_printf(bio_err,"gethostbyname addr is not AF_INET\n"); ++ BIO_printf(bio_err,"gethostbyname addr family is not correct\n"); + return(0); + } +- ip[0]=he->h_addr_list[0][0]; +- ip[1]=he->h_addr_list[0][1]; +- ip[2]=he->h_addr_list[0][2]; +- ip[3]=he->h_addr_list[0][3]; ++ if (domain == AF_INET) ++ memset(ip, 0, 4); ++#if OPENSSL_USE_IPV6 ++ else ++ memset(ip, 0, 16); ++#endif ++ memcpy(ip, he->h_addr_list[0], he->h_length); ++ return 1; + } +- return(1); + err: + return(0); + } +@@ -574,7 +692,7 @@ + static unsigned long ghbn_hits=0L; + static unsigned long ghbn_miss=0L; + +-static struct hostent *GetHostByName(char *name) ++static struct hostent *GetHostByName(char *name, int domain) + { + struct hostent *ret; + int i,lowi=0; +@@ -589,14 +707,20 @@ + } + if (ghbn_cache[i].order > 0) + { +- if (strncmp(name,ghbn_cache[i].name,128) == 0) ++ if ((strncmp(name,ghbn_cache[i].name,128) == 0) && ++ (ghbn_cache[i].ent.h_addrtype == domain)) + break; + } + } + if (i == GHBN_NUM) /* no hit*/ + { + ghbn_miss++; +- ret=gethostbyname(name); ++ if (domain == AF_INET) ++ ret=gethostbyname(name); ++#if OPENSSL_USE_IPV6 ++ else ++ ret=gethostbyname2(name, AF_INET6); ++#endif + if (ret == NULL) return(NULL); + /* else add to cache */ + if(strlen(name) < sizeof ghbn_cache[0].name) diff --git a/dev-libs/openssl/files/openssl-1.0.1e-perl-5.18.patch b/dev-libs/openssl/files/openssl-1.0.1e-perl-5.18.patch new file mode 100644 index 00000000..6427c535 --- /dev/null +++ b/dev-libs/openssl/files/openssl-1.0.1e-perl-5.18.patch @@ -0,0 +1,375 @@ +https://bugs.gentoo.org/483820 + +Submitted By: Martin Ward +Date: 2013-06-18 +Initial Package Version: 1.0.1e +Upstream Status: Unknown +Origin: self, based on fedora +Description: Fixes install with perl-5.18. + +--- openssl-1.0.1e.orig/doc/apps/cms.pod ++++ openssl-1.0.1e/doc/apps/cms.pod +@@ -450,28 +450,28 @@ + + =over 4 + +-=item 0 ++=item C<0> + + the operation was completely successfully. + +-=item 1 ++=item C<1> + + an error occurred parsing the command options. + +-=item 2 ++=item C<2> + + one of the input files could not be read. + +-=item 3 ++=item C<3> + + an error occurred creating the CMS file or when reading the MIME + message. + +-=item 4 ++=item C<4> + + an error occurred decrypting or verifying the message. + +-=item 5 ++=item C<5> + + the message was verified correctly but an error occurred writing out + the signers certificates. +--- openssl-1.0.1e.orig/doc/apps/smime.pod ++++ openssl-1.0.1e/doc/apps/smime.pod +@@ -308,28 +308,28 @@ + + =over 4 + +-=item 0 ++=item C<0> + + the operation was completely successfully. + +-=item 1 ++=item C<1> + + an error occurred parsing the command options. + +-=item 2 ++=item C<2> + + one of the input files could not be read. + +-=item 3 ++=item C<3> + + an error occurred creating the PKCS#7 file or when reading the MIME + message. + +-=item 4 ++=item C<4> + + an error occurred decrypting or verifying the message. + +-=item 5 ++=item C<5> + + the message was verified correctly but an error occurred writing out + the signers certificates. +--- openssl-1.0.1e.orig/doc/crypto/X509_STORE_CTX_get_error.pod ++++ openssl-1.0.1e/doc/crypto/X509_STORE_CTX_get_error.pod +@@ -278,6 +278,8 @@ + an application specific error. This will never be returned unless explicitly + set by an application. + ++=back ++ + =head1 NOTES + + The above functions should be used instead of directly referencing the fields +--- openssl-1.0.1e.orig/doc/ssl/SSL_accept.pod ++++ openssl-1.0.1e/doc/ssl/SSL_accept.pod +@@ -44,12 +44,12 @@ + + =over 4 + +-=item 1 ++=item C<1> + + The TLS/SSL handshake was successfully completed, a TLS/SSL connection has been + established. + +-=item 0 ++=item C<0> + + The TLS/SSL handshake was not successful but was shut down controlled and + by the specifications of the TLS/SSL protocol. Call SSL_get_error() with the +--- openssl-1.0.1e.orig/doc/ssl/SSL_clear.pod ++++ openssl-1.0.1e/doc/ssl/SSL_clear.pod +@@ -56,12 +56,12 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The SSL_clear() operation could not be performed. Check the error stack to + find out the reason. + +-=item 1 ++=item C<1> + + The SSL_clear() operation was successful. + +--- openssl-1.0.1e.orig/doc/ssl/SSL_COMP_add_compression_method.pod ++++ openssl-1.0.1e/doc/ssl/SSL_COMP_add_compression_method.pod +@@ -53,11 +53,11 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The operation succeeded. + +-=item 1 ++=item C<1> + + The operation failed. Check the error queue to find out the reason. + +--- openssl-1.0.1e.orig/doc/ssl/SSL_connect.pod ++++ openssl-1.0.1e/doc/ssl/SSL_connect.pod +@@ -41,12 +41,12 @@ + + =over 4 + +-=item 1 ++=item C<1> + + The TLS/SSL handshake was successfully completed, a TLS/SSL connection has been + established. + +-=item 0 ++=item C<0> + + The TLS/SSL handshake was not successful but was shut down controlled and + by the specifications of the TLS/SSL protocol. Call SSL_get_error() with the +--- openssl-1.0.1e.orig/doc/ssl/SSL_CTX_add_session.pod ++++ openssl-1.0.1e/doc/ssl/SSL_CTX_add_session.pod +@@ -52,13 +52,13 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The operation failed. In case of the add operation, it was tried to add + the same (identical) session twice. In case of the remove operation, the + session was not found in the cache. + +-=item 1 ++=item C<1> + + The operation succeeded. + +--- openssl-1.0.1e.orig/doc/ssl/SSL_CTX_load_verify_locations.pod ++++ openssl-1.0.1e/doc/ssl/SSL_CTX_load_verify_locations.pod +@@ -100,13 +100,13 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The operation failed because B and B are NULL or the + processing at one of the locations specified failed. Check the error + stack to find out the reason. + +-=item 1 ++=item C<1> + + The operation succeeded. + +--- openssl-1.0.1e.orig/doc/ssl/SSL_CTX_set_client_CA_list.pod ++++ openssl-1.0.1e/doc/ssl/SSL_CTX_set_client_CA_list.pod +@@ -66,11 +66,11 @@ + + =over 4 + +-=item 1 ++=item C<1> + + The operation succeeded. + +-=item 0 ++=item C<0> + + A failure while manipulating the STACK_OF(X509_NAME) object occurred or + the X509_NAME could not be extracted from B. Check the error stack +--- openssl-1.0.1e.orig/doc/ssl/SSL_CTX_set_session_id_context.pod ++++ openssl-1.0.1e/doc/ssl/SSL_CTX_set_session_id_context.pod +@@ -64,13 +64,13 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The length B of the session id context B exceeded + the maximum allowed length of B. The error + is logged to the error stack. + +-=item 1 ++=item C<1> + + The operation succeeded. + +--- openssl-1.0.1e.orig/doc/ssl/SSL_CTX_set_ssl_version.pod ++++ openssl-1.0.1e/doc/ssl/SSL_CTX_set_ssl_version.pod +@@ -42,11 +42,11 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The new choice failed, check the error stack to find out the reason. + +-=item 1 ++=item C<1> + + The operation succeeded. + +--- openssl-1.0.1e.orig/doc/ssl/SSL_CTX_use_psk_identity_hint.pod ++++ openssl-1.0.1e/doc/ssl/SSL_CTX_use_psk_identity_hint.pod +@@ -81,6 +81,8 @@ + + Return values from the server callback are interpreted as follows: + ++=over ++ + =item > 0 + + PSK identity was found and the server callback has provided the PSK +@@ -94,9 +96,11 @@ + connection will fail with decryption_error before it will be finished + completely. + +-=item 0 ++=item C<0> + + PSK identity was not found. An "unknown_psk_identity" alert message + will be sent and the connection setup fails. + ++=back ++ + =cut +--- openssl-1.0.1e.orig/doc/ssl/SSL_do_handshake.pod ++++ openssl-1.0.1e/doc/ssl/SSL_do_handshake.pod +@@ -45,12 +45,12 @@ + + =over 4 + +-=item 1 ++=item C<1> + + The TLS/SSL handshake was successfully completed, a TLS/SSL connection has been + established. + +-=item 0 ++=item C<0> + + The TLS/SSL handshake was not successful but was shut down controlled and + by the specifications of the TLS/SSL protocol. Call SSL_get_error() with the +--- openssl-1.0.1e.orig/doc/ssl/SSL_read.pod ++++ openssl-1.0.1e/doc/ssl/SSL_read.pod +@@ -86,7 +86,7 @@ + The read operation was successful; the return value is the number of + bytes actually read from the TLS/SSL connection. + +-=item 0 ++=item C<0> + + The read operation was not successful. The reason may either be a clean + shutdown due to a "close notify" alert sent by the peer (in which case +--- openssl-1.0.1e.orig/doc/ssl/SSL_session_reused.pod ++++ openssl-1.0.1e/doc/ssl/SSL_session_reused.pod +@@ -27,11 +27,11 @@ + + =over 4 + +-=item 0 ++=item C<0> + + A new session was negotiated. + +-=item 1 ++=item C<1> + + A session was reused. + +--- openssl-1.0.1e.orig/doc/ssl/SSL_set_fd.pod ++++ openssl-1.0.1e/doc/ssl/SSL_set_fd.pod +@@ -35,11 +35,11 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The operation failed. Check the error stack to find out why. + +-=item 1 ++=item C<1> + + The operation succeeded. + +--- openssl-1.0.1e.orig/doc/ssl/SSL_set_session.pod ++++ openssl-1.0.1e/doc/ssl/SSL_set_session.pod +@@ -37,11 +37,11 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The operation failed; check the error stack to find out the reason. + +-=item 1 ++=item C<1> + + The operation succeeded. + +--- openssl-1.0.1e.orig/doc/ssl/SSL_shutdown.pod ++++ openssl-1.0.1e/doc/ssl/SSL_shutdown.pod +@@ -92,12 +92,12 @@ + + =over 4 + +-=item 1 ++=item C<1> + + The shutdown was successfully completed. The "close notify" alert was sent + and the peer's "close notify" alert was received. + +-=item 0 ++=item C<0> + + The shutdown is not yet finished. Call SSL_shutdown() for a second time, + if a bidirectional shutdown shall be performed. +--- openssl-1.0.1e.orig/doc/ssl/SSL_write.pod ++++ openssl-1.0.1e/doc/ssl/SSL_write.pod +@@ -79,7 +79,7 @@ + The write operation was successful, the return value is the number of + bytes actually written to the TLS/SSL connection. + +-=item 0 ++=item C<0> + + The write operation was not successful. Probably the underlying connection + was closed. Call SSL_get_error() with the return value B to find out, diff --git a/dev-libs/openssl/files/openssl-1.0.1e-rdrand-explicit.patch b/dev-libs/openssl/files/openssl-1.0.1e-rdrand-explicit.patch new file mode 100644 index 00000000..8c414a42 --- /dev/null +++ b/dev-libs/openssl/files/openssl-1.0.1e-rdrand-explicit.patch @@ -0,0 +1,28 @@ +https://chromium-review.googlesource.com/181001 + +From 8a1956f3eac8b164f8c741ff1a259008bab3bac1 Mon Sep 17 00:00:00 2001 +From: "Dr. Stephen Henson" +Date: Wed, 11 Dec 2013 14:45:12 +0000 +Subject: [PATCH] Don't use rdrand engine as default unless explicitly + requested. (cherry picked from commit + 16898401bd47a153fbf799127ff57fdcfcbd324f) + +--- + crypto/engine/eng_rdrand.c | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/crypto/engine/eng_rdrand.c b/crypto/engine/eng_rdrand.c +index a9ba5ae..4e9e91d 100644 +--- a/crypto/engine/eng_rdrand.c ++++ b/crypto/engine/eng_rdrand.c +@@ -104,6 +104,7 @@ static int bind_helper(ENGINE *e) + { + if (!ENGINE_set_id(e, engine_e_rdrand_id) || + !ENGINE_set_name(e, engine_e_rdrand_name) || ++ !ENGINE_set_flags(e, ENGINE_FLAGS_NO_REGISTER_ALL) || + !ENGINE_set_init_function(e, rdrand_init) || + !ENGINE_set_RAND(e, &rdrand_meth) ) + return 0; +-- +1.8.4.3 + diff --git a/dev-libs/openssl/files/openssl-1.0.1e-s_client-verify.patch b/dev-libs/openssl/files/openssl-1.0.1e-s_client-verify.patch new file mode 100644 index 00000000..03e4f599 --- /dev/null +++ b/dev-libs/openssl/files/openssl-1.0.1e-s_client-verify.patch @@ -0,0 +1,18 @@ +https://bugs.gentoo.org/472584 +http://rt.openssl.org/Ticket/Display.html?id=2387&user=guest&pass=guest + +fix verification handling in s_client. when loading paths, make sure +we properly fallback to setting the default paths. + +--- a/apps/s_client.c ++++ b/apps/s_client.c +@@ -899,7 +899,7 @@ + if (!set_cert_key_stuff(ctx,cert,key)) + goto end; + +- if ((!SSL_CTX_load_verify_locations(ctx,CAfile,CApath)) || ++ if ((!SSL_CTX_load_verify_locations(ctx,CAfile,CApath)) && + (!SSL_CTX_set_default_verify_paths(ctx))) + { + /* BIO_printf(bio_err,"error setting default verify locations\n"); */ + diff --git a/dev-libs/openssl/files/openssl-1.0.1e-tls-ver-crash.patch b/dev-libs/openssl/files/openssl-1.0.1e-tls-ver-crash.patch new file mode 100644 index 00000000..034da7d4 --- /dev/null +++ b/dev-libs/openssl/files/openssl-1.0.1e-tls-ver-crash.patch @@ -0,0 +1,34 @@ +https://bugs.gentoo.org/494816 +https://bugzilla.redhat.com/show_bug.cgi?id=1045363 +http://rt.openssl.org/Ticket/Display.html?id=3200&user=guest&pass=guest + +From ca989269a2876bae79393bd54c3e72d49975fc75 Mon Sep 17 00:00:00 2001 +From: "Dr. Stephen Henson" +Date: Thu, 19 Dec 2013 14:37:39 +0000 +Subject: [PATCH] Use version in SSL_METHOD not SSL structure. + +When deciding whether to use TLS 1.2 PRF and record hash algorithms +use the version number in the corresponding SSL_METHOD structure +instead of the SSL structure. The SSL structure version is sometimes +inaccurate. Note: OpenSSL 1.0.2 and later effectively do this already. +(CVE-2013-6449) +--- + ssl/s3_lib.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/ssl/s3_lib.c b/ssl/s3_lib.c +index bf832bb..c4ef273 100644 +--- a/ssl/s3_lib.c ++++ b/ssl/s3_lib.c +@@ -4286,7 +4286,7 @@ need to go to SSL_ST_ACCEPT. + long ssl_get_algorithm2(SSL *s) + { + long alg2 = s->s3->tmp.new_cipher->algorithm2; +- if (TLS1_get_version(s) >= TLS1_2_VERSION && ++ if (s->method->version == TLS1_2_VERSION && + alg2 == (SSL_HANDSHAKE_MAC_DEFAULT|TLS1_PRF)) + return SSL_HANDSHAKE_MAC_SHA256 | TLS1_PRF_SHA256; + return alg2; +-- +1.8.4.3 + diff --git a/dev-libs/openssl/files/openssl-1.0.1f-perl-5.18.patch b/dev-libs/openssl/files/openssl-1.0.1f-perl-5.18.patch new file mode 100644 index 00000000..c6620963 --- /dev/null +++ b/dev-libs/openssl/files/openssl-1.0.1f-perl-5.18.patch @@ -0,0 +1,356 @@ +Forward-ported from openssl-1.0.1e-perl-5.18.patch +Fixes install with perl-5.18. + +https://bugs.gentoo.org/show_bug.cgi?id=497286 + +Signed-off-by: Lars Wendler + +--- openssl-1.0.1f/doc/apps/cms.pod ++++ openssl-1.0.1f/doc/apps/cms.pod +@@ -450,28 +450,28 @@ + + =over 4 + +-=item 0 ++=item C<0> + + the operation was completely successfully. + +-=item 1 ++=item C<1> + + an error occurred parsing the command options. + +-=item 2 ++=item C<2> + + one of the input files could not be read. + +-=item 3 ++=item C<3> + + an error occurred creating the CMS file or when reading the MIME + message. + +-=item 4 ++=item C<4> + + an error occurred decrypting or verifying the message. + +-=item 5 ++=item C<5> + + the message was verified correctly but an error occurred writing out + the signers certificates. +--- openssl-1.0.1f/doc/apps/smime.pod ++++ openssl-1.0.1f/doc/apps/smime.pod +@@ -308,28 +308,28 @@ + + =over 4 + +-=item 0 ++=item C<0> + + the operation was completely successfully. + +-=item 1 ++=item C<1> + + an error occurred parsing the command options. + +-=item 2 ++=item C<2> + + one of the input files could not be read. + +-=item 3 ++=item C<3> + + an error occurred creating the PKCS#7 file or when reading the MIME + message. + +-=item 4 ++=item C<4> + + an error occurred decrypting or verifying the message. + +-=item 5 ++=item C<5> + + the message was verified correctly but an error occurred writing out + the signers certificates. +--- openssl-1.0.1f/doc/ssl/SSL_accept.pod ++++ openssl-1.0.1f/doc/ssl/SSL_accept.pod +@@ -44,13 +44,13 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The TLS/SSL handshake was not successful but was shut down controlled and + by the specifications of the TLS/SSL protocol. Call SSL_get_error() with the + return value B to find out the reason. + +-=item 1 ++=item C<1> + + The TLS/SSL handshake was successfully completed, a TLS/SSL connection has been + established. +--- openssl-1.0.1f/doc/ssl/SSL_clear.pod ++++ openssl-1.0.1f/doc/ssl/SSL_clear.pod +@@ -56,12 +56,12 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The SSL_clear() operation could not be performed. Check the error stack to + find out the reason. + +-=item 1 ++=item C<1> + + The SSL_clear() operation was successful. + +--- openssl-1.0.1f/doc/ssl/SSL_COMP_add_compression_method.pod ++++ openssl-1.0.1f/doc/ssl/SSL_COMP_add_compression_method.pod +@@ -53,11 +53,11 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The operation succeeded. + +-=item 1 ++=item C<1> + + The operation failed. Check the error queue to find out the reason. + +--- openssl-1.0.1f/doc/ssl/SSL_connect.pod ++++ openssl-1.0.1f/doc/ssl/SSL_connect.pod +@@ -41,13 +41,13 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The TLS/SSL handshake was not successful but was shut down controlled and + by the specifications of the TLS/SSL protocol. Call SSL_get_error() with the + return value B to find out the reason. + +-=item 1 ++=item C<1> + + The TLS/SSL handshake was successfully completed, a TLS/SSL connection has been + established. +--- openssl-1.0.1f/doc/ssl/SSL_CTX_add_session.pod ++++ openssl-1.0.1f/doc/ssl/SSL_CTX_add_session.pod +@@ -52,13 +52,13 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The operation failed. In case of the add operation, it was tried to add + the same (identical) session twice. In case of the remove operation, the + session was not found in the cache. + +-=item 1 ++=item C<1> + + The operation succeeded. + +--- openssl-1.0.1f/doc/ssl/SSL_CTX_load_verify_locations.pod ++++ openssl-1.0.1f/doc/ssl/SSL_CTX_load_verify_locations.pod +@@ -100,13 +100,13 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The operation failed because B and B are NULL or the + processing at one of the locations specified failed. Check the error + stack to find out the reason. + +-=item 1 ++=item C<1> + + The operation succeeded. + +--- openssl-1.0.1f/doc/ssl/SSL_CTX_set_client_CA_list.pod ++++ openssl-1.0.1f/doc/ssl/SSL_CTX_set_client_CA_list.pod +@@ -66,13 +66,13 @@ + + =over 4 + +-=item 0 ++=item C<0> + + A failure while manipulating the STACK_OF(X509_NAME) object occurred or + the X509_NAME could not be extracted from B. Check the error stack + to find out the reason. + +-=item 1 ++=item C<1> + + The operation succeeded. + +--- openssl-1.0.1f/doc/ssl/SSL_CTX_set_session_id_context.pod ++++ openssl-1.0.1f/doc/ssl/SSL_CTX_set_session_id_context.pod +@@ -64,13 +64,13 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The length B of the session id context B exceeded + the maximum allowed length of B. The error + is logged to the error stack. + +-=item 1 ++=item C<1> + + The operation succeeded. + +--- openssl-1.0.1f/doc/ssl/SSL_CTX_set_ssl_version.pod ++++ openssl-1.0.1f/doc/ssl/SSL_CTX_set_ssl_version.pod +@@ -42,11 +42,11 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The new choice failed, check the error stack to find out the reason. + +-=item 1 ++=item C<1> + + The operation succeeded. + +--- openssl-1.0.1f/doc/ssl/SSL_CTX_use_psk_identity_hint.pod ++++ openssl-1.0.1f/doc/ssl/SSL_CTX_use_psk_identity_hint.pod +@@ -96,7 +96,7 @@ + connection will fail with decryption_error before it will be finished + completely. + +-=item 0 ++=item C<0> + + PSK identity was not found. An "unknown_psk_identity" alert message + will be sent and the connection setup fails. +--- openssl-1.0.1f/doc/ssl/SSL_do_handshake.pod ++++ openssl-1.0.1f/doc/ssl/SSL_do_handshake.pod +@@ -45,13 +45,13 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The TLS/SSL handshake was not successful but was shut down controlled and + by the specifications of the TLS/SSL protocol. Call SSL_get_error() with the + return value B to find out the reason. + +-=item 1 ++=item C<1> + + The TLS/SSL handshake was successfully completed, a TLS/SSL connection has been + established. +--- openssl-1.0.1f/doc/ssl/SSL_read.pod ++++ openssl-1.0.1f/doc/ssl/SSL_read.pod +@@ -86,7 +86,7 @@ + The read operation was successful; the return value is the number of + bytes actually read from the TLS/SSL connection. + +-=item 0 ++=item C<0> + + The read operation was not successful. The reason may either be a clean + shutdown due to a "close notify" alert sent by the peer (in which case +--- openssl-1.0.1f/doc/ssl/SSL_session_reused.pod ++++ openssl-1.0.1f/doc/ssl/SSL_session_reused.pod +@@ -27,11 +27,11 @@ + + =over 4 + +-=item 0 ++=item C<0> + + A new session was negotiated. + +-=item 1 ++=item C<1> + + A session was reused. + +--- openssl-1.0.1f/doc/ssl/SSL_set_fd.pod ++++ openssl-1.0.1f/doc/ssl/SSL_set_fd.pod +@@ -35,11 +35,11 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The operation failed. Check the error stack to find out why. + +-=item 1 ++=item C<1> + + The operation succeeded. + +--- openssl-1.0.1f/doc/ssl/SSL_set_session.pod ++++ openssl-1.0.1f/doc/ssl/SSL_set_session.pod +@@ -37,11 +37,11 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The operation failed; check the error stack to find out the reason. + +-=item 1 ++=item C<1> + + The operation succeeded. + +--- openssl-1.0.1f/doc/ssl/SSL_shutdown.pod ++++ openssl-1.0.1f/doc/ssl/SSL_shutdown.pod +@@ -92,14 +92,14 @@ + + =over 4 + +-=item 0 ++=item C<0> + + The shutdown is not yet finished. Call SSL_shutdown() for a second time, + if a bidirectional shutdown shall be performed. + The output of L may be misleading, as an + erroneous SSL_ERROR_SYSCALL may be flagged even though no error occurred. + +-=item 1 ++=item C<1> + + The shutdown was successfully completed. The "close notify" alert was sent + and the peer's "close notify" alert was received. +--- openssl-1.0.1f/doc/ssl/SSL_write.pod ++++ openssl-1.0.1f/doc/ssl/SSL_write.pod +@@ -79,7 +79,7 @@ + The write operation was successful, the return value is the number of + bytes actually written to the TLS/SSL connection. + +-=item 0 ++=item C<0> + + The write operation was not successful. Probably the underlying connection + was closed. Call SSL_get_error() with the return value B to find out, diff --git a/dev-libs/openssl/files/openssl-1.0.1f-revert-alpha-perl-generation.patch b/dev-libs/openssl/files/openssl-1.0.1f-revert-alpha-perl-generation.patch new file mode 100644 index 00000000..42a6fbd5 --- /dev/null +++ b/dev-libs/openssl/files/openssl-1.0.1f-revert-alpha-perl-generation.patch @@ -0,0 +1,83 @@ +when gcc is given a .s file and told to preprocess it, it outputs nothing + +https://bugs.gentoo.org/499086 + +From a2976461784ce463fc7f336cd0dce607d21c2fad Mon Sep 17 00:00:00 2001 +From: Mike Frysinger +Date: Sat, 25 Jan 2014 05:44:47 -0500 +Subject: [PATCH] Revert "Make Makefiles OSF-make-friendly." + +This reverts commit d1cf23ac86c05b22b8780e2c03b67230564d2d34. +--- + crypto/Makefile | 4 +--- + crypto/bn/Makefile | 4 +--- + crypto/evp/Makefile | 2 +- + crypto/modes/Makefile | 5 +---- + crypto/sha/Makefile | 4 +--- + util/shlib_wrap.sh | 6 +----- + 6 files changed, 6 insertions(+), 19 deletions(-) + +diff --git a/crypto/Makefile b/crypto/Makefile +index b253f50..1de9d5f 100644 +--- a/crypto/Makefile ++++ b/crypto/Makefile +@@ -86,9 +86,7 @@ ia64cpuid.s: ia64cpuid.S; $(CC) $(CFLAGS) -E ia64cpuid.S > $@ + ppccpuid.s: ppccpuid.pl; $(PERL) ppccpuid.pl $(PERLASM_SCHEME) $@ + pariscid.s: pariscid.pl; $(PERL) pariscid.pl $(PERLASM_SCHEME) $@ + alphacpuid.s: alphacpuid.pl +- (preproc=/tmp/$$$$.$@; trap "rm $$preproc" INT; \ +- $(PERL) alphacpuid.pl > $$preproc && \ +- $(CC) -E $$preproc > $@ && rm $$preproc) ++ $(PERL) $< | $(CC) -E - | tee $@ > /dev/null + + subdirs: + @target=all; $(RECURSIVE_MAKE) +diff --git a/crypto/bn/Makefile b/crypto/bn/Makefile +index b62b676..6c03363 100644 +--- a/crypto/bn/Makefile ++++ b/crypto/bn/Makefile +@@ -136,9 +136,7 @@ ppc-mont.s: asm/ppc-mont.pl;$(PERL) asm/ppc-mont.pl $(PERLASM_SCHEME) $@ + ppc64-mont.s: asm/ppc64-mont.pl;$(PERL) asm/ppc64-mont.pl $(PERLASM_SCHEME) $@ + + alpha-mont.s: asm/alpha-mont.pl +- (preproc=/tmp/$$$$.$@; trap "rm $$preproc" INT; \ +- $(PERL) asm/alpha-mont.pl > $$preproc && \ +- $(CC) -E $$preproc > $@ && rm $$preproc) ++ $(PERL) $< | $(CC) -E - | tee $@ > /dev/null + + # GNU make "catch all" + %-mont.S: asm/%-mont.pl; $(PERL) $< $(PERLASM_SCHEME) $@ +diff --git a/crypto/modes/Makefile b/crypto/modes/Makefile +index ce0dcd6..88ac65e 100644 +--- a/crypto/modes/Makefile ++++ b/crypto/modes/Makefile +@@ -55,10 +55,7 @@ aesni-gcm-x86_64.s: asm/aesni-gcm-x86_64.pl + ghash-sparcv9.s: asm/ghash-sparcv9.pl + $(PERL) asm/ghash-sparcv9.pl $@ $(CFLAGS) + ghash-alpha.s: asm/ghash-alpha.pl +- (preproc=/tmp/$$$$.$@; trap "rm $$preproc" INT; \ +- $(PERL) asm/ghash-alpha.pl > $$preproc && \ +- $(CC) -E $$preproc > $@ && rm $$preproc) +- ++ $(PERL) $< | $(CC) -E - | tee $@ > /dev/null + ghash-parisc.s: asm/ghash-parisc.pl + $(PERL) asm/ghash-parisc.pl $(PERLASM_SCHEME) $@ + +diff --git a/crypto/sha/Makefile b/crypto/sha/Makefile +index 64eab6c..63fba69 100644 +--- a/crypto/sha/Makefile ++++ b/crypto/sha/Makefile +@@ -60,9 +60,7 @@ sha256-armv4.S: asm/sha256-armv4.pl + $(PERL) $< $(PERLASM_SCHEME) $@ + + sha1-alpha.s: asm/sha1-alpha.pl +- (preproc=/tmp/$$$$.$@; trap "rm $$preproc" INT; \ +- $(PERL) asm/sha1-alpha.pl > $$preproc && \ +- $(CC) -E $$preproc > $@ && rm $$preproc) ++ $(PERL) $< | $(CC) -E - | tee $@ > /dev/null + + # Solaris make has to be explicitly told + sha1-x86_64.s: asm/sha1-x86_64.pl; $(PERL) asm/sha1-x86_64.pl $(PERLASM_SCHEME) > $@ +-- +1.8.5.3 + diff --git a/dev-libs/openssl/metadata.xml b/dev-libs/openssl/metadata.xml new file mode 100644 index 00000000..84ddb514 --- /dev/null +++ b/dev-libs/openssl/metadata.xml @@ -0,0 +1,13 @@ + + + +base-system + + Disable EC/RC5 algorithms (as they seem to be patented) + Enable support for RFC 3779 (X.509 Extensions for IP Addresses and AS Identifiers) + Enable the Heartbeat Extension in TLS and DTLS + + + cpe:/a:openssl:openssl + + diff --git a/dev-libs/openssl/openssl-1.0.1g-r1.ebuild b/dev-libs/openssl/openssl-1.0.1g-r1.ebuild new file mode 100644 index 00000000..d5a38708 --- /dev/null +++ b/dev-libs/openssl/openssl-1.0.1g-r1.ebuild @@ -0,0 +1,261 @@ +# Copyright 1999-2013 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: $ + +EAPI="4" + +inherit eutils flag-o-matic toolchain-funcs multilib multilib-minimal + +REV="1.7" +DESCRIPTION="full-strength general purpose cryptography library (including SSL and TLS)" +HOMEPAGE="http://www.openssl.org/" +SRC_URI="mirror://openssl/source/${P}.tar.gz + http://cvs.pld-linux.org/cgi-bin/cvsweb.cgi/packages/${PN}/${PN}-c_rehash.sh?rev=${REV} -> ${PN}-c_rehash.sh.${REV}" + +LICENSE="openssl" +SLOT="0" +KEYWORDS="~alpha amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc -ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd ~arm-linux ~x86-linux" +IUSE="bindist gmp kerberos rfc3779 sse2 static-libs test +tls-heartbeat vanilla zlib" + +# Have the sub-libs in RDEPEND with [static-libs] since, logically, +# our libssl.a depends on libz.a/etc... at runtime. +LIB_DEPEND="gmp? ( dev-libs/gmp[static-libs(+)] ) + zlib? ( sys-libs/zlib[static-libs(+)] ) + kerberos? ( app-crypt/mit-krb5 )" +# The blocks are temporary just to make sure people upgrade to a +# version that lack runtime version checking. We'll drop them in +# the future. +RDEPEND="static-libs? ( ${LIB_DEPEND} ) + abi_x86_32? ( + !<=app-emulation/emul-linux-x86-baselibs-20131008-r5 + !app-emulation/emul-linux-x86-baselibs[-abi_x86_32(-)] + ) + !static-libs? ( ${LIB_DEPEND//\[static-libs(+)]} ) + ! "${WORKDIR}"/c_rehash || die #416717 +} + +src_prepare() { + # Make sure we only ever touch Makefile.org and avoid patching a file + # that gets blown away anyways by the Configure script in src_configure + rm -f Makefile + + if ! use vanilla ; then + epatch "${FILESDIR}"/${PN}-1.0.0a-ldflags.patch #327421 + epatch "${FILESDIR}"/${PN}-1.0.0d-windres.patch #373743 + epatch "${FILESDIR}"/${PN}-1.0.0h-pkg-config.patch + epatch "${FILESDIR}"/${PN}-1.0.1-parallel-build.patch + epatch "${FILESDIR}"/${PN}-1.0.1-x32.patch + epatch "${FILESDIR}"/${PN}-1.0.1e-ipv6.patch + epatch "${FILESDIR}"/${PN}-1.0.1f-perl-5.18.patch #497286 + epatch "${FILESDIR}"/${PN}-1.0.1e-s_client-verify.patch #472584 + epatch "${FILESDIR}"/${PN}-1.0.1f-revert-alpha-perl-generation.patch #499086 + + epatch_user #332661 + fi + + # disable fips in the build + # make sure the man pages are suffixed #302165 + # don't bother building man pages if they're disabled + sed -i \ + -e '/DIRS/s: fips : :g' \ + -e '/^MANSUFFIX/s:=.*:=ssl:' \ + -e '/^MAKEDEPPROG/s:=.*:=$(CC):' \ + -e $(has noman FEATURES \ + && echo '/^install:/s:install_docs::' \ + || echo '/^MANDIR=/s:=.*:='${EPREFIX}'/usr/share/man:') \ + Makefile.org \ + || die + # show the actual commands in the log + sed -i '/^SET_X/s:=.*:=set -x:' Makefile.shared + + # allow openssl to be cross-compiled + cp "${FILESDIR}"/gentoo.config-1.0.1 gentoo.config || die + chmod a+rx gentoo.config + + append-flags -fno-strict-aliasing + append-flags $(test-flags-CC -Wa,--noexecstack) + + sed -i '1s,^:$,#!'${EPREFIX}'/usr/bin/perl,' Configure #141906 + # The config script does stupid stuff to prompt the user. Kill it. + sed -i '/stty -icanon min 0 time 50; read waste/d' config || die + ./config --test-sanity || die "I AM NOT SANE" + multilib_copy_sources +} + +multilib_src_configure() { + unset APPS #197996 + unset SCRIPTS #312551 + unset CROSS_COMPILE #311473 + + tc-export CC AR RANLIB RC + + # Clean out patent-or-otherwise-encumbered code + # Camellia: Royalty Free http://en.wikipedia.org/wiki/Camellia_(cipher) + # IDEA: Expired http://en.wikipedia.org/wiki/International_Data_Encryption_Algorithm + # EC: ????????? ??/??/2015 http://en.wikipedia.org/wiki/Elliptic_Curve_Cryptography + # MDC2: Expired http://en.wikipedia.org/wiki/MDC-2 + # RC5: 5,724,428 03/03/2015 http://en.wikipedia.org/wiki/RC5 + + use_ssl() { usex $1 "enable-${2:-$1}" "no-${2:-$1}" " ${*:3}" ; } + echoit() { echo "$@" ; "$@" ; } + + local krb5=$(has_version app-crypt/mit-krb5 && echo "MIT" || echo "Heimdal") + + # See if our toolchain supports __uint128_t. If so, it's 64bit + # friendly and can use the nicely optimized code paths. #460790 + local ec_nistp_64_gcc_128 + # Disable it for now though #469976 + #if ! use bindist ; then + # echo "__uint128_t i;" > "${T}"/128.c + # if ${CC} ${CFLAGS} -c "${T}"/128.c -o /dev/null >&/dev/null ; then + # ec_nistp_64_gcc_128="enable-ec_nistp_64_gcc_128" + # fi + #fi + + local sslout=$(./gentoo.config) + einfo "Use configuration ${sslout:-(openssl knows best)}" + local config="Configure" + [[ -z ${sslout} ]] && config="config" + ECONF_SOURCE=${S} \ + echoit \ + ./${config} \ + ${sslout} \ + $(use sse2 || echo "no-sse2") \ + enable-camellia \ + $(use_ssl !bindist ec) \ + ${ec_nistp_64_gcc_128} \ + enable-idea \ + enable-mdc2 \ + $(use_ssl !bindist rc5) \ + enable-tlsext \ + $(use_ssl gmp gmp -lgmp) \ + $(use_ssl kerberos krb5 --with-krb5-flavor=${krb5}) \ + $(use_ssl rfc3779) \ + $(use_ssl tls-heartbeat heartbeats) \ + $(use_ssl zlib) \ + --prefix="${EPREFIX}"/usr \ + --openssldir="${EPREFIX}"${SSL_CNF_DIR} \ + --libdir=$(get_libdir) \ + shared threads \ + || die + + # Clean out hardcoded flags that openssl uses + local CFLAG=$(grep ^CFLAG= Makefile | LC_ALL=C sed \ + -e 's:^CFLAG=::' \ + -e 's:-fomit-frame-pointer ::g' \ + -e 's:-O[0-9] ::g' \ + -e 's:-march=[-a-z0-9]* ::g' \ + -e 's:-mcpu=[-a-z0-9]* ::g' \ + -e 's:-m[a-z0-9]* ::g' \ + ) + sed -i \ + -e "/^CFLAG/s|=.*|=${CFLAG} ${CFLAGS}|" \ + -e "/^SHARED_LDFLAGS=/s|$| ${LDFLAGS}|" \ + Makefile || die +} + +multilib_src_compile() { + # depend is needed to use $confopts; it also doesn't matter + # that it's -j1 as the code itself serializes subdirs + emake -j1 depend + emake all + # rehash is needed to prep the certs/ dir; do this + # separately to avoid parallel build issues. + emake rehash +} + +multilib_src_test() { + emake -j1 test +} + +multilib_src_install() { + emake INSTALL_PREFIX="${D}" install +} + +multilib_src_install_all() { + dobin "${WORKDIR}"/c_rehash #333117 + dodoc CHANGES* FAQ NEWS README doc/*.txt doc/c-indentation.el + dohtml -r doc/* + use rfc3779 && dodoc engines/ccgost/README.gost + + # This is crappy in that the static archives are still built even + # when USE=static-libs. But this is due to a failing in the openssl + # build system: the static archives are built as PIC all the time. + # Only way around this would be to manually configure+compile openssl + # twice; once with shared lib support enabled and once without. + use static-libs || rm -f "${ED}"/usr/lib*/lib*.a + + # create the certs directory + dodir ${SSL_CNF_DIR}/certs + cp -RP certs/* "${ED}"${SSL_CNF_DIR}/certs/ || die + rm -r "${ED}"${SSL_CNF_DIR}/certs/{demo,expired} + + # Namespace openssl programs to prevent conflicts with other man pages + cd "${ED}"/usr/share/man + local m d s + for m in $(find . -type f | xargs grep -L '#include') ; do + d=${m%/*} ; d=${d#./} ; m=${m##*/} + [[ ${m} == openssl.1* ]] && continue + [[ -n $(find -L ${d} -type l) ]] && die "erp, broken links already!" + mv ${d}/{,ssl-}${m} + # fix up references to renamed man pages + sed -i '/^[.]SH "SEE ALSO"/,/^[.]/s:\([^(, ]*(1)\):ssl-\1:g' ${d}/ssl-${m} + ln -s ssl-${m} ${d}/openssl-${m} + # locate any symlinks that point to this man page ... we assume + # that any broken links are due to the above renaming + for s in $(find -L ${d} -type l) ; do + s=${s##*/} + rm -f ${d}/${s} + ln -s ssl-${m} ${d}/ssl-${s} + ln -s ssl-${s} ${d}/openssl-${s} + done + done + [[ -n $(find -L ${d} -type l) ]] && die "broken manpage links found :(" + + dodir /etc/sandbox.d #254521 + echo 'SANDBOX_PREDICT="/dev/crypto"' > "${ED}"/etc/sandbox.d/10openssl + + diropts -m0700 + keepdir ${SSL_CNF_DIR}/private +} + +pkg_preinst() { + has_version ${CATEGORY}/${PN}:0.9.8 && return 0 + preserve_old_lib /usr/$(get_libdir)/lib{crypto,ssl}.so.0.9.8 +} + +pkg_postinst() { + ebegin "Running 'c_rehash ${EROOT%/}${SSL_CNF_DIR}/certs/' to rebuild hashes #333069" + c_rehash "${EROOT%/}${SSL_CNF_DIR}/certs" >/dev/null + eend $? + + has_version ${CATEGORY}/${PN}:0.9.8 && return 0 + preserve_old_lib_notify /usr/$(get_libdir)/lib{crypto,ssl}.so.0.9.8 +} -- cgit v1.2.3