From ba34ae5a178ff5b2a184f54f7e9d5d59fd9f03ec Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Sun, 14 Oct 2018 11:22:45 +0100 Subject: sys-fs/cryptsetup : add openrc parts --- .../sys-fs/cryptsetup/cryptsetup-1.7.5.exheres-0 | 19 ++ .../sys-fs/cryptsetup/files/openrc/confd/dmcrypt | 11 + .../sys-fs/cryptsetup/files/openrc/initd/dmcrypt | 339 +++++++++++++++++++++ 3 files changed, 369 insertions(+) create mode 100644 packages/sys-fs/cryptsetup/files/openrc/confd/dmcrypt create mode 100644 packages/sys-fs/cryptsetup/files/openrc/initd/dmcrypt diff --git a/packages/sys-fs/cryptsetup/cryptsetup-1.7.5.exheres-0 b/packages/sys-fs/cryptsetup/cryptsetup-1.7.5.exheres-0 index 65f6cec..363457c 100644 --- a/packages/sys-fs/cryptsetup/cryptsetup-1.7.5.exheres-0 +++ b/packages/sys-fs/cryptsetup/cryptsetup-1.7.5.exheres-0 @@ -3,6 +3,8 @@ # Copyright 2011-2012 Wulf C. Krueger # Distributed under the terms of the GNU General Public License v2 +require openrc-service + SUMMARY="Userland utilities for dm-crypt" HOMEPAGE="https://gitlab.com/${PN}/${PN}" DOWNLOADS="mirror://kernel/linux/utils/${PN}/v$(ever range 1-2)/${PNV}.tar.xz" @@ -71,3 +73,20 @@ src_configure() { fi) } +src_install() { + default + + install_openrc_files +} + +pkg_preinst() { + if [[ -f ""${ROOT}"etc/conf.d/dmcrypt" ]]; then + edo mv ""${ROOT}"etc/conf.d/dmcrypt" ""${ROOT}"etc/conf.d/dmcrypt.bak" + fi +} + +pkg_postinst() { + if [[ -f ""${ROOT}"etc/conf.d/dmcrypt.bak" ]]; then + edo mv ""${ROOT}"etc/conf.d/dmcrypt.bak" ""${ROOT}"etc/conf.d/dmcrypt" + fi +} diff --git a/packages/sys-fs/cryptsetup/files/openrc/confd/dmcrypt b/packages/sys-fs/cryptsetup/files/openrc/confd/dmcrypt new file mode 100644 index 0000000..699d7e7 --- /dev/null +++ b/packages/sys-fs/cryptsetup/files/openrc/confd/dmcrypt @@ -0,0 +1,11 @@ +# /etc/conf.d/dmcrypt + +# How long to wait for each timeout (in seconds). +dmcrypt_key_timeout=1 + +# Max number of checks to perform (see dmcrypt_key_timeout). +#dmcrypt_max_timeout=300 + +# Number of password retries. +dmcrypt_retries=5 + diff --git a/packages/sys-fs/cryptsetup/files/openrc/initd/dmcrypt b/packages/sys-fs/cryptsetup/files/openrc/initd/dmcrypt new file mode 100644 index 0000000..cdd20ba --- /dev/null +++ b/packages/sys-fs/cryptsetup/files/openrc/initd/dmcrypt @@ -0,0 +1,339 @@ +#!/sbin/openrc-run +# Copyright 1999-2015 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +depend() { + before checkfs fsck + + if grep -qs ^swap= "${conf_file}" ; then + before swap + fi +} + +# We support multiple dmcrypt instances based on $SVCNAME +conf_file="/etc/conf.d/${SVCNAME}" + +# Get splash helpers if available. +if [ -e /sbin/splash-functions.sh ] ; then + . /sbin/splash-functions.sh +fi + +# Setup mappings for an individual target/swap +# Note: This relies on variables localized in the main body below. +dm_crypt_execute() { + local dev ret mode foo + + if [ -z "${target}" -a -z "${swap}" ] ; then + return + fi + + # Set up default values. + : ${dmcrypt_key_timeout:=1} + : ${dmcrypt_max_timeout:=300} + : ${dmcrypt_retries:=5} + + # Handle automatic look up of the source path. + if [ -z "${source}" -a -n "${loop_file}" ] ; then + source=$(losetup --show -f "${loop_file}") + fi + case ${source} in + *=*) + source=$(blkid -l -t "${source}" -o device) + ;; + esac + if [ -z "${source}" ] || [ ! -e "${source}" ] ; then + ewarn "source \"${source}\" for ${target} missing, skipping..." + return + fi + + if [ -n "${target}" ] ; then + # let user set options, otherwise leave empty + : ${options:=' '} + elif [ -n "${swap}" ] ; then + if cryptsetup isLuks ${source} 2>/dev/null ; then + ewarn "The swap you have defined is a LUKS partition. Aborting crypt-swap setup." + return + fi + target=${swap} + # swap contents do not need to be preserved between boots, luks not required. + # suspend2 users should have initramfs's init handling their swap partition either way. + : ${options:='-c aes -h sha1 -d /dev/urandom'} + : ${pre_mount:='mkswap ${dev}'} + fi + + if [ -n "${loop_file}" ] ; then + dev="/dev/mapper/${target}" + ebegin " Setting up loop device ${source}" + losetup ${source} ${loop_file} + fi + + # cryptsetup: + # open # is $source + # create # is $target + local arg1="create" arg2="${target}" arg3="${source}" + if cryptsetup isLuks ${source} 2>/dev/null ; then + arg1="open" + arg2="${source}" + arg3="${target}" + fi + + # Older versions reported: + # ${target} is active: + # Newer versions report: + # ${target} is active[ and is in use.] + if cryptsetup status ${target} | egrep -q ' is active' ; then + einfo "dm-crypt mapping ${target} is already configured" + return + fi + splash svc_input_begin ${SVCNAME} >/dev/null 2>&1 + + # Handle keys + if [ -n "${key}" ] ; then + read_abort() { + # some colors + local ans savetty resettty + [ -z "${NORMAL}" ] && eval $(eval_ecolors) + einfon " $1? (${WARN}yes${NORMAL}/${GOOD}No${NORMAL}) " + shift + # This is ugly as s**t. But POSIX doesn't provide `read -t`, so + # we end up having to implement our own crap with stty/etc... + savetty=$(stty -g) + resettty='stty ${savetty}; trap - EXIT HUP INT TERM' + trap 'eval "${resettty}"' EXIT HUP INT TERM + stty -icanon + stty min 0 time "$(( $2 * 10 ))" + ans=$(dd count=1 bs=1 2>/dev/null) || ans='' + eval "${resettty}" + if [ -z "${ans}" ] ; then + printf '\r' + else + echo + fi + case ${ans} in + [yY]) return 0;; + *) return 1;; + esac + } + + # Notes: sed not used to avoid case where /usr partition is encrypted. + mode=${key##*:} && ( [ "${mode}" = "${key}" ] || [ -z "${mode}" ] ) && mode=reg + key=${key%:*} + case "${mode}" in + gpg|reg) + # handle key on removable device + if [ -n "${remdev}" ] ; then + # temp directory to mount removable device + local mntrem="${RC_SVCDIR}/dm-crypt-remdev.$$" + if [ ! -d "${mntrem}" ] ; then + if ! mkdir -p "${mntrem}" ; then + ewarn "${source} will not be decrypted ..." + einfo "Reason: Unable to create temporary mount point '${mntrem}'" + return + fi + fi + i=0 + einfo "Please insert removable device for ${target}" + while [ ${i} -lt ${dmcrypt_max_timeout} ] ; do + foo="" + if mount -n -o ro "${remdev}" "${mntrem}" 2>/dev/null >/dev/null ; then + # keyfile exists? + if [ ! -e "${mntrem}${key}" ] ; then + umount -n "${mntrem}" + rmdir "${mntrem}" + einfo "Cannot find ${key} on removable media." + read_abort "Abort" ${dmcrypt_key_timeout} && return + else + key="${mntrem}${key}" + break + fi + else + [ -e "${remdev}" ] \ + && foo="mount failed" \ + || foo="mount source not found" + fi + : $((i += 1)) + read_abort "Stop waiting after $i attempts (${foo})" -t 1 && return + done + else # keyfile ! on removable device + if [ ! -e "${key}" ] ; then + ewarn "${source} will not be decrypted ..." + einfo "Reason: keyfile ${key} does not exist." + return + fi + fi + ;; + *) + ewarn "${source} will not be decrypted ..." + einfo "Reason: mode ${mode} is invalid." + return + ;; + esac + else + mode=none + fi + ebegin " ${target} using: ${options} ${arg1} ${arg2} ${arg3}" + if [ "${mode}" = "gpg" ] ; then + : ${gpg_options:='-q -d'} + # gpg available ? + if command -v gpg >/dev/null ; then + i=0 + while [ ${i} -lt ${dmcrypt_retries} ] ; do + # paranoid, don't store key in a variable, pipe it so it stays very little in ram unprotected. + # save stdin stdout stderr "values" + timeout ${dmcrypt_max_timeout} gpg ${gpg_options} ${key} 2>/dev/null | \ + cryptsetup --key-file - ${options} ${arg1} ${arg2} ${arg3} + ret=$? + # The timeout command exits 124 when it times out. + [ ${ret} -eq 0 -o ${ret} -eq 124 ] && break + : $(( i += 1 )) + done + eend ${ret} "failure running cryptsetup" + else + ewarn "${source} will not be decrypted ..." + einfo "Reason: cannot find gpg application." + einfo "You have to install app-crypt/gnupg first." + einfo "If you have /usr on its own partition, try copying gpg to /bin ." + fi + else + if [ "${mode}" = "reg" ] ; then + cryptsetup ${options} -d ${key} ${arg1} ${arg2} ${arg3} + ret=$? + eend ${ret} "failure running cryptsetup" + else + cryptsetup ${options} ${arg1} ${arg2} ${arg3} + ret=$? + eend ${ret} "failure running cryptsetup" + fi + fi + if [ -d "${mntrem}" ] ; then + umount -n ${mntrem} 2>/dev/null >/dev/null + rmdir ${mntrem} 2>/dev/null >/dev/null + fi + splash svc_input_end ${SVCNAME} >/dev/null 2>&1 + + if [ ${ret} -ne 0 ] ; then + cryptfs_status=1 + else + if [ -n "${pre_mount}" ] ; then + dev="/dev/mapper/${target}" + eval ebegin \"" pre_mount: ${pre_mount}"\" + eval "${pre_mount}" > /dev/null + ewend $? || cryptfs_status=1 + fi + fi +} + +# Lookup optional bootparams +get_bootparam_val() { + # We're given something like: + # foo=bar=cow + # Return the "bar=cow" part. + case $1 in + *=*) + echo "${1#*=}" + ;; + esac +} + +start() { + local header=true cryptfs_status=0 + local gpg_options key loop_file target targetline options pre_mount post_mount source swap remdev + + local x + for x in $(cat /proc/cmdline) ; do + case "${x}" in + key_timeout=*) + dmcrypt_key_timeout=$(get_bootparam_val "${x}") + ;; + esac + done + + while read targetline <&3 ; do + case ${targetline} in + # skip comments and blank lines + ""|"#"*) continue ;; + # skip service-specific openrc configs #377927 + rc_*) continue ;; + esac + + ${header} && ebegin "Setting up dm-crypt mappings" + header=false + + # check for the start of a new target/swap + case ${targetline} in + target=*|swap=*) + # If we have a target queued up, then execute it + dm_crypt_execute + + # Prepare for the next target/swap by resetting variables + unset gpg_options key loop_file target options pre_mount post_mount source swap remdev + ;; + + gpg_options=*|remdev=*|key=*|loop_file=*|options=*|pre_mount=*|post_mount=*|source=*) + if [ -z "${target}${swap}" ] ; then + ewarn "Ignoring setting outside target/swap section: ${targetline}" + continue + fi + ;; + + dmcrypt_*=*) + # ignore global options + continue + ;; + + *) + ewarn "Skipping invalid line in ${conf_file}: ${targetline}" + ;; + esac + + # Queue this setting for the next call to dm_crypt_execute + eval "${targetline}" + done 3< ${conf_file} + + # If we have a target queued up, then execute it + dm_crypt_execute + + ewend ${cryptfs_status} "Failed to setup dm-crypt devices" +} + +stop() { + local line header + + # Break down all mappings + header=true + egrep "^(target|swap)=" ${conf_file} | \ + while read line ; do + ${header} && einfo "Removing dm-crypt mappings" + header=false + + target= swap= + eval ${line} + + [ -n "${swap}" ] && target=${swap} + if [ -z "${target}" ] ; then + ewarn "invalid line in ${conf_file}: ${line}" + continue + fi + + ebegin " ${target}" + cryptsetup remove ${target} + eend $? + done + + # Break down loop devices + header=true + grep '^source=./dev/loop' ${conf_file} | \ + while read line ; do + ${header} && einfo "Detaching dm-crypt loop devices" + header=false + + source= + eval ${line} + + ebegin " ${source}" + losetup -d "${source}" + eend $? + done + + return 0 +} -- cgit v1.2.3