From a80e14f4928139917933da5f765751e1ca4676b8 Mon Sep 17 00:00:00 2001
From: V3n3RiX <venerix@redcorelinux.org>
Date: Sun, 23 Sep 2018 23:07:21 +0100
Subject: sys-boot/dracut : recommend sys-boot/dracut-config-redcore (new
 exheres)

---
 .../dracut-config-redcore-1337.exheres-0           | 39 ++++++++++++++++++++++
 .../files/redcore-dracut.conf                      | 11 ++++++
 packages/sys-boot/dracut/dracut.exlib              |  3 ++
 3 files changed, 53 insertions(+)
 create mode 100644 packages/sys-boot/dracut-config-redcore/dracut-config-redcore-1337.exheres-0
 create mode 100644 packages/sys-boot/dracut-config-redcore/files/redcore-dracut.conf

diff --git a/packages/sys-boot/dracut-config-redcore/dracut-config-redcore-1337.exheres-0 b/packages/sys-boot/dracut-config-redcore/dracut-config-redcore-1337.exheres-0
new file mode 100644
index 0000000..5110049
--- /dev/null
+++ b/packages/sys-boot/dracut-config-redcore/dracut-config-redcore-1337.exheres-0
@@ -0,0 +1,39 @@
+# Copyright 2018 Redcore Linux Project
+# Distributed under the terms of the GNU General Public License v2
+
+SUMMARY="Redcore Linux Project dracut config"
+DESCRIPTION="Dracut configuration file for Redcore Linux Project"
+HOMEPAGE="https://redcorelinux.org"
+
+LICENCES="GPL-2"
+SLOT="0"
+PLATFORMS="~amd64"
+MYOPTIONS=""
+
+DEPENDENCIES="
+    run:
+        firmware/intel-microcode [[
+            description = [ early microcode for Intel CPU's ]
+        ]]
+        firmware/linux-firmware [[
+            description = [ early microcode for AMD CPU's ]
+        ]]
+"
+
+src_prepare() {
+    :
+}
+
+src_configure() {
+    :
+}
+
+src_compile() {
+    :
+}
+
+src_install() {
+    dodir /etc/dracut.conf.d
+    insinto /etc/dracut.conf.d
+    doins "${FILES}"/redcore-dracut.conf
+}
diff --git a/packages/sys-boot/dracut-config-redcore/files/redcore-dracut.conf b/packages/sys-boot/dracut-config-redcore/files/redcore-dracut.conf
new file mode 100644
index 0000000..0791417
--- /dev/null
+++ b/packages/sys-boot/dracut-config-redcore/files/redcore-dracut.conf
@@ -0,0 +1,11 @@
+# Host-Only mode: Install only what is needed for booting the local host instead of a generic host and generate host-specific configuration. 
+hostonly="no"
+
+# Combine early microcode with ramdisk. Uncomment the line bellow, and run "dracut -f" if you want early microcode update.
+early_microcode="yes"
+
+# Dracut modules to add when building the iniframfs
+add_dracutmodules+=" drm plymouth "
+
+# Dracut modules to ommit when building the initramfs.
+omit_dracutmodules+=" systemd systemd-initrd systemd-networkd dracut-systemd "
diff --git a/packages/sys-boot/dracut/dracut.exlib b/packages/sys-boot/dracut/dracut.exlib
index bc674db..84b58b7 100644
--- a/packages/sys-boot/dracut/dracut.exlib
+++ b/packages/sys-boot/dracut/dracut.exlib
@@ -46,6 +46,9 @@ DEPENDENCIES="
     test:
         app-shells/dash
     recommendation:
+        sys-boot/dracut-config-redcore [[
+            description = [ Redcore Linux Project dracut config ]
+        ]]
         sys-process/procps [[
             description = [ Required by the base module for pidof if not using busybox ]
         ]]
-- 
cgit v1.2.3