#!/sbin/openrc-run
# Copyright 1999-2011 Ultimate Linux Solutions CC
# Distributed under the terms of the GNU General Public License v2

depend() {
	before dahdi
}

dahdi_load_modules() {
	local hwlist loc status mod mod_vname pciid desc

	hwlist=$(/usr/sbin/dahdi_hardware)

	if [ -z "${hwlist}" ]; then
		einfo "No digium hardware found."
		ebegin "Loading module dahdi_dummy"
		/sbin/modprobe dahdi_dummy
		eend $?
		return
	fi

	echo "${hwlist}" | while read loc mod pciid desc; do
		status="${mod:${#mod}-1:1}"
		mod="${mod%[+-]}"
		mod_vname="mod_${mod}"

		einfo "Found $desc at $loc (module: $mod)"

		if [ "${status}" = "-" -a "${!mod_vname-notloaded}" = "notloaded" ]; then
			ebegin "Loading module $mod"
			/sbin/modprobe $mod
			eend

			[ $? -eq 0 ] && eval "$mod_vname=loaded"
		fi
	done
}

dahdi_module_unload() {
	local mod=$1 s
	[ -d /sys/module/${mod} ] || return 0

	for s in $(find /sys/module/${mod}/holders -type l); do
		dahdi_module_unload $(basename $s)
	done

	ebegin "Removing dahdi module: $mod"
	/sbin/rmmod $mod
	eend $?
}

dahdi_gen_fxo_config() {
	local port=$1

	echo "fxs${DAHDI_FXO_SIGNALLING-ks}=${port}"
	[ "${DAHDI_FXO_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${port}"
}

dahdi_gen_fxs_config() {
	local port=$1

	echo "fxo${DAHDI_FXO_SIGNALLING-ks}=${port}"
	[ "${DAHDI_FXS_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${port}"
}

dahdi_gen_bri_te_config() {
	span=$1
	port=$2
	basechan=$3

	echo "span=${span},${port},0,${DAHDI_BRI_FRAMING-CSS},${DAHDI_BRI_CODING-AMI}"
	echo "bchan=${basechan}-$(( basechan + 1 ))"
	echo "hardhdlc=$(( basechan + 2 ))"
	[ "${DAHDI_BRI_TE_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${basechan}-$(( basechan + 1 ))"
}

dahdi_gen_bri_nt_config() {
	span=$1
	port=$2
	basechan=$3

	echo "span=${span},0,0,${DAHDI_BRI_FRAMING-CSS},${DAHDI_BRI_CODING-AMI}"
	echo "bchan=${basechan}-$(( basechan + 1 ))"
	echo "hardhdlc=$(( basechan + 2 ))"
	[ "${DAHDI_BRI_NT_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${basechan}-$(( basechan + 1 ))"
}

dahdi_gen_e1_cpe_config() {
	span=$1
	port=$2
	basechan=$3

	echo "span=${span},${port},0,${DAHDI_E1_FRAMING-CCS},${DAHDI_E1_CODING-HDB3,CRC4}"
	bchans="${basechan}-$(( basechan + 14 )),$(( basechan + 16 ))-$(( basechan + 30 ))"
	echo "bchan=${bchans}"
	echo "dchan=$(( basechan + 15 ))"
	[ "${DAHDI_E1_CPE_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${bchans}"
}

dahdi_gen_e1_net_config() {
	span=$1
	port=$2
	basechan=$3

	echo "span=${span},0,0,${DAHDI_E1_FRAMING-CCS},${DAHDI_E1_CODING-HDB3,CRC4}"
	bchans="${basechan}-$(( basechan + 14 )),$(( basechan + 16 ))-$(( basechan + 30 ))"
	echo "bchan=${bchans}"
	echo "dchan=$(( basechan + 15 ))"
	[ "${DAHDI_E1_NET_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${bchans}"
}

dahdi_gen_t1_cpe_config() {
	span=$1
	port=$2
	basechan=$3

	echo "span=${span},${port},0,${DAHDI_T1_FRAMING-ESF},${DAHDI_T1_CODING-B8ZS}"
	bchans="${basechan}-$(( basechan + 22 ))"
	echo "bchan=${bchans}"
	echo "dchan=$(( basechan + 23 ))"
	[ "${DAHDI_T1_CPE_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${bchans}"
}

dahdi_gen_t1_net_config() {
	span=$1
	port=$2
	basechan=$3

	echo "span=${span},0,0,${DAHDI_T1_FRAMING-ESF},${DAHDI_T1_CODING-B8ZS}"
	bchans="${basechan}-$(( basechan + 22 ))"
	echo "bchan=${bchans}"
	echo "dchan=$(( basechan + 23 ))"
	[ "${DAHDI_T1_NET_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${bchans}"
}

dahdi_conf_span() {
	local span=$1
	local type=$2
	local desc=$3
	local port=$4
	local basechan=$5
	local vname="PRI_SPAN_${span}_NET"
	local cfunc="dahdi_gen_"

	# Analog we need to deal with on a port-by-port basis.
	[ "${type}" = "analog" ] && return 0

	echo ""
	echo "# ${desc}"

	case "${type}" in
		digital-TE)
			cfunc="${cfunc}bri_te"
		;;
		digital-NT)
			cfunc="${cfunc}bri_nt"
		;;
		digital-[TE]1)
			cfunc="${cfunc}$(echo "${type##*-}" | tr 'TE' 'te')"
			# Use CPE by default.  Unfortunately there is no easy
			# way to detect CPE vs NET as far as I know and specifying
			# in a config that you want NET mode seems the sanest way.
			if yesno "${vname}"; then
				cfunc="${cfunc}_net"
			else
				cfunc="${cfunc}_cpe"
			fi
		;;
		*)
			echo "# Don't know how to configure this (type=${type})."
			echo "# Please file a bug on bugs.gentoo.org and add jaco@uls.co.za as CC."
			return 1
		;;
	esac

	"${cfunc}_config" "${span}" "${port}" "${basechan}"
}

dahdi_gen_config() {
	local type manufacturer devicetype basechan aport atype
	local span=
	local tfile="$(mktemp)"
	local sfile="$(mktemp)"
	local plocation=""
	local isdnport=0

	/usr/sbin/dahdi_scan > "${sfile}" 
	exec 3<"${sfile}"
	exec 4>"${tfile}"

	echo "# Automatically dahdi-autoconf generated file ($(date))." >&4
	echo "# This file WILL get regenerated whenever you restart dahdi-autoconf." >&4

	while read LINE <&3; do
		case "$LINE" in
			\[*\])
				if [ -n "${span}" ]; then
					ebegin "Configuring ${manufacturer} ${devicetype} (${name})"
					dahdi_conf_span "${span}" "${type}" "${manufacturer} ${devicetype} (${name})" "${isdnport}" "${basechan}" >&4
					eend $?
				fi
				span="${LINE%?}"
				span="${span#?}"
			;;
			type=*|manufacturer=*|devicetype=*|basechan=*|name=*)
				eval "${LINE%%=*}='${LINE#*=}'"
			;;
			location=*)
				eval "${LINE%%=*}='${LINE#*=}'"
				if [ "${location}" = "${plocation}" ]; then
					isdnport=$(( isdnport + 1 ))
				else
					plocation="${location}"
					isdnport=1
				fi
			;;
			port=*)
				# For analog cards only.
				aport="${LINE#*=}"; aport="${aport%,*}"
				atype="${LINE#*,}"
				if [ "${aport}" -eq "${basechan}" ]; then
					echo "" >&4
					echo "# ${manufacturer} ${devicetype} (${name})" >&4
				fi
				case "${atype}" in
					FXO)
						dahdi_gen_fxo_config $aport >&4
					;;
					FXS)
						dahdi_gen_fxs_config $aport >&4
					;;
				esac
			;;
		esac
	done
	
	if [ -n "${span}" ]; then
		ebegin "Configuring ${manufacturer} ${devicetype} (${name})"
		dahdi_conf_span "${span}" "${type}" "${manufacturer} ${devicetype} (${name})" "${isdnport}" "${basechan}" >&4
		eend $?
	fi

	echo "" >&4
	echo "loadzone = ${DAHDI_ZONE}" >&4
	echo "defaultzone = ${DAHDI_ZONE}" >&4
	echo "## END OF AUTOCONFIGURED FILE ##" >&4

	exec 3<&-
	exec 4<&-

	rm -f "${sfile}"
	[ -r /etc/dahdi/system.conf ] && mv /etc/dahdi/system.conf /etc/dahdi/system.conf.bck
	mv "${tfile}" /etc/dahdi/system.conf
}

start() {
	dahdi_load_modules

	if [ ! -r /dev/dahdi/ctl ]; then
		eerror "No DAHDI compatible cards detected."
		return 1
	fi

	ebegin "Generating DAHDI Configuration"
	dahdi_gen_config
	eend $?
}

stop() {
	dahdi_module_unload dahdi
}