From 9aa80713372911cec499b3adb2cd746790920916 Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Tue, 29 Jun 2021 10:15:54 +0100 Subject: gentoo resync : 29.06.2021 --- sys-process/fcron/Manifest | 6 +- sys-process/fcron/fcron-3.2.1-r1.ebuild | 255 -------------------------- sys-process/fcron/fcron-3.2.1-r3.ebuild | 258 -------------------------- sys-process/fcron/fcron-3.2.1-r4.ebuild | 256 ++++++++++++++++++++++++++ sys-process/fcron/fcron-3.2.1-r5.ebuild | 259 ++++++++++++++++++++++++++ sys-process/fcron/fcron-3.3.0_beta-r1.ebuild | 263 -------------------------- sys-process/fcron/fcron-3.3.0_beta-r2.ebuild | 264 +++++++++++++++++++++++++++ 7 files changed, 782 insertions(+), 779 deletions(-) delete mode 100644 sys-process/fcron/fcron-3.2.1-r1.ebuild delete mode 100644 sys-process/fcron/fcron-3.2.1-r3.ebuild create mode 100644 sys-process/fcron/fcron-3.2.1-r4.ebuild create mode 100644 sys-process/fcron/fcron-3.2.1-r5.ebuild delete mode 100644 sys-process/fcron/fcron-3.3.0_beta-r1.ebuild create mode 100644 sys-process/fcron/fcron-3.3.0_beta-r2.ebuild (limited to 'sys-process/fcron') diff --git a/sys-process/fcron/Manifest b/sys-process/fcron/Manifest index ae05662bf8a1..ad65f15c7609 100644 --- a/sys-process/fcron/Manifest +++ b/sys-process/fcron/Manifest @@ -8,7 +8,7 @@ AUX fcron.init.4 2589 BLAKE2B e84ffd9d1b5a3cd1ee60c426cde67a3e7bd5a853d2cbdd943f AUX fcrontab.2 226 BLAKE2B 4fc55d14c44797b1dcc34000de1a9ffa43b1a52037db5dcec76854dfc4c84283dceafdc84f2dec9dfcb95dd5a39d90f31c828b819d29122b2b7b2135f4c65899 SHA512 f0c74c2cd601750f7de8d9926278bd79026b236f2bda4033fe1961c48171b3aa3712bd8d8917f9c784bf0ce54ed09781572cb7e9397d9579a8ba6a114c1e5c2e DIST fcron-3.2.1.src.tar.gz 601142 BLAKE2B 184b74f9d64186b7d3aae87d48ed0107525fd0c73bb8db86408bd246592ff4fbcbc04f8ca0064868a8555d7c6be2f183172d62daeed75275cd836517da504d0f SHA512 ddfd3e3a297b843c924aacccffaa5c1c6b300497f39daa1cdb90dc4cf4bc757042b0b2c1f055c119c8128c64d830ee0e8757091610432f5ffcacca25d369e5cd DIST fcron-3.3.0_beta.tar.gz 592481 BLAKE2B b862dac8e70621e299ec2fbbc75a0e8843e7a085190fa7a18f9444f6f41f28cf55ef0dcd7234a388b9b3e6689f25019a581ded2ae6002643bb3dc472a59207bb SHA512 e5b76e23af774997d9ee1ef58d17009cea95d10b19a2d22b550b178a39bb7c439c055b440eb99c4286db6622901e5deb029318e4425e8cd098766452ffc15bc6 -EBUILD fcron-3.2.1-r1.ebuild 6964 BLAKE2B d9f568fa7ce9d039767c6325f94ad44a75779f04d818fb82f79958751291fb21cb437c03fe05a021d93fa5a4adf28dc9b48430d1b26ff18299b9e6e8132ee399 SHA512 61c714fd91c530c5a84186b1c7cf4290c25f7d21484db9caee0c993ef1c11c5bf7a390b554c3da4a0c3d19d35d0f220168dc92b378fc3eca8e42df4f4add8ccd -EBUILD fcron-3.2.1-r3.ebuild 7066 BLAKE2B 0d649d322fbaa9d0248fe9d7d1c1657f01ecb4288faff7b12266945a9e1352e680b2a5070820ca632b2be9857452b72e7d02fb6e47b965109fb0862514b95d80 SHA512 d6cf7d28e5f29791a7b30c985503daca7c5b0032e08c0d933f66e958b1e3f7461f78e5eda01bad57f23df2d4fdb21ceaa7e60784bc5d29967cd6fa39d67a6dfa -EBUILD fcron-3.3.0_beta-r1.ebuild 7094 BLAKE2B 0c8b148ba06a66d7d8e8d379c7bf09a1c68dd430e48cbe2cb5cca2e31e2f08969ac7f9b895c4b6f8ae9f681d885508e9de4b6c09d39417db41505e7d29715ceb SHA512 cada425b9ab1fe5ff83aa76504c58822130465a0c76dfea35976ecd2b98c9fb74a953483c4ff55654bf0f7e2545a87806c4e59147314824d542abec2478fa74c +EBUILD fcron-3.2.1-r4.ebuild 6984 BLAKE2B a0ffbc0ff0c143eff057010923b90a0fe379c8d9d55e756d7fc9b13ee68390aaf4aed26894bda92ccf5cfe2276a1269db8f517a9adba0aace662dfecee796790 SHA512 a44daaee4c1d15644427faa1f345b7c141e5c3bb27406f2b4a4ccb9c2819cd951a6fd475d508be3f485cb7acc34aaba4581b9527442de3a0e2865258b0c56a52 +EBUILD fcron-3.2.1-r5.ebuild 7086 BLAKE2B 37ca577a208c063388b1a52b14af448d455d4f83840dfe034b31f59d92466ce25e95a6e7e3c19d2eab6d55e80c66647d599d27939e26f1f76e6fa994a14452fa SHA512 5b8ae2ac1f3ed81e7f271afdccbd0a3981adb50134b9492cea9a9a0ad4f56ece462f9958711135c6748740cb7fa22efe664250fb74a8e94f53f023c2d23da375 +EBUILD fcron-3.3.0_beta-r2.ebuild 7114 BLAKE2B 7e302b974f42ad77be822ba97dd94556020b886b2b5e2abf188c4edd3c35bcecdf9a7db0bbc19e743a42284b8a563bb832be293602b47d73d73ff5e27983b98c SHA512 68f9f511885778d7a804012129cddd752859f6cfa23020efc499fc4234e3a1a51eda027042c3be0bdae71cfc4c140409b8c3b82d0ec97fd3f6c5764ab505095e MISC metadata.xml 1236 BLAKE2B cba4b98c8851e5c28d4bdfd06081cea35f8bed59e9f48d3ad094e43cfe72e12242ebd5a656b2a573dffe8e97158810370801b8395f3562eed0600540b60c9248 SHA512 6bc85c005fe5adefd42834bc3448bf97f2757b219ca9f28f03555cdf900044f8814f34386c468de30eb3ea482fc0bb839e59376734921e1cd7761e703858699f diff --git a/sys-process/fcron/fcron-3.2.1-r1.ebuild b/sys-process/fcron/fcron-3.2.1-r1.ebuild deleted file mode 100644 index e1c90a0def31..000000000000 --- a/sys-process/fcron/fcron-3.2.1-r1.ebuild +++ /dev/null @@ -1,255 +0,0 @@ -# Copyright 1999-2021 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI="6" - -WANT_AUTOMAKE=none - -inherit cron pam flag-o-matic user autotools versionator systemd - -DESCRIPTION="A command scheduler with extended capabilities over cron and anacron" -HOMEPAGE="http://fcron.free.fr/" -SRC_URI="http://fcron.free.fr/archives/${P}.src.tar.gz" - -LICENSE="GPL-2" -KEYWORDS="amd64 arm ~hppa ~ia64 ~mips ppc ppc64 sparc x86" -IUSE="audit debug pam selinux l10n_fr +mta +system-crontab readline" - -DEPEND="audit? ( sys-process/audit ) - pam? ( sys-libs/pam ) - readline? ( sys-libs/readline:= ) - selinux? ( sys-libs/libselinux )" - -RDEPEND="${DEPEND} - app-misc/editor-wrapper - mta? ( virtual/mta ) - pam? ( sys-auth/pambase )" - -PATCHES=( - "${FILESDIR}"/${PN}-3.1.1-noreadline.patch - "${FILESDIR}"/${PN}-3.2.1-configure-fix-audit-parameter-check.patch -) - -pkg_setup() { - enewgroup fcron - enewuser fcron -1 -1 -1 fcron - rootuser=$(egetent passwd 0 | cut -d ':' -f 1) - [[ ${rootuser} ]] || rootuser=root - rootgroup=$(egetent group 0 | cut -d ':' -f 1) - [[ ${rootgroup} ]] || rootgroup=root -} - -src_prepare() { - default - - # respect LDFLAGS - sed -i "s:\(@LIBS@\):\$(LDFLAGS) \1:" Makefile.in || die "sed failed" - - # Adjust fcrontab path - sed -i -e 's:/etc/fcrontab:/etc/fcron/fcrontab:' script/check_system_crontabs.sh || die - - mv configure.in configure.ac || die - - cp "${FILESDIR}"/crontab.2 "${WORKDIR}"/crontab || die - - eautoconf -} - -src_configure() { - # Don't try to pass --with-debug as it'll play with cflags as - # well, and run foreground which is a _very_ nasty idea for - # Gentoo. - use debug && append-cppflags -DDEBUG - - # bindir is used just for calling fcronsighup - econf \ - --with-cflags="${CFLAGS}" \ - --bindir=/usr/libexec \ - --sbindir=/usr/libexec \ - $(use_with audit) \ - $(use_with mta sendmail) \ - $(use_with pam) \ - $(use_with readline) \ - $(use_with selinux) \ - --sysconfdir=/etc/fcron \ - --with-username=fcron \ - --with-groupname=fcron \ - --with-piddir=/run \ - --with-spooldir=/var/spool/fcron \ - --with-fifodir=/run \ - --with-fcrondyn=yes \ - --disable-checks \ - --with-editor=/usr/libexec/editor \ - --with-shell=/bin/sh \ - --without-db2man \ - --without-dsssl-dir \ - --with-rootname=${rootuser} \ - --with-rootgroup=${rootgroup} \ - --with-systemdsystemunitdir="$(systemd_get_systemunitdir)" -} - -src_compile() { - default - - # bug #216460 - sed -i \ - -e 's:/usr/local/etc/fcron:/etc/fcron/fcron:g' \ - -e 's:/usr/local/etc:/etc:g' \ - -e 's:/usr/local/:/usr/:g' \ - doc/*/*/*.{txt,1,5,8,html} \ - || die "unable to fix documentation references" -} - -src_install() { - keepdir /var/spool/fcron - - exeinto /usr/libexec - doexe fcron fcronsighup - - dobin fcrondyn fcrontab - - insinto /etc/fcron - doins files/fcron.{allow,deny,conf} - - if use system-crontab; then - dosym fcrontab /usr/bin/crontab - - exeinto /usr/libexec - newexe script/check_system_crontabs.sh check_system_crontabs - - insinto /etc/fcron - newins "${FILESDIR}"/fcrontab.2 fcrontab - - fowners ${rootuser}:fcron /etc/fcron/fcrontab - fperms 0640 /etc/fcron/fcrontab - - insinto /etc - newins "${FILESDIR}"/crontab.2 crontab - fi - - fowners fcron:fcron \ - /var/spool/fcron \ - /usr/bin/fcron{dyn,tab} - - # fcronsighup needs to be suid root, because it sends a HUP to the - # running fcron daemon, but only has to be called by the fcron group - # anyway - fowners ${rootuser}:fcron \ - /usr/libexec/fcronsighup \ - /etc/fcron/fcron.{allow,deny,conf} \ - /etc/fcron - - fperms 6770 /var/spool/fcron - fperms 6775 /usr/bin/fcron{dyn,tab} - - fperms 4710 /usr/libexec/fcronsighup - - fperms 0750 /etc/fcron - fperms 0640 /etc/fcron/fcron.{allow,deny,conf} - - use pam && pamd_mimic system-services fcron auth account session - cat > "${T}"/fcrontab.pam <<- EOF - # Don't ask for the user's password; fcrontab will only allow to - # change user if running as root. - auth sufficient pam_permit.so - - # Still use the system-auth stack for account and session as the - # sysadmin might have set up stuff properly, and also avoids - # sidestepping limits (since fcrontab will run \$EDITOR). - account include system-auth - session include system-auth - EOF - use pam && newpamd "${T}"/fcrontab.pam fcrontab - - newinitd "${FILESDIR}"/fcron.init.4 fcron - systemd_newunit "${S}/script/fcron.init.systemd" fcron.service - - local DOCS=( MANIFEST VERSION "${WORKDIR}/crontab") - DOCS+=( doc/en/txt/{readme,thanks,faq,todo,relnotes,changes}.txt ) - - local HTML_DOCS=( doc/en/HTML/. ) - - einstalldocs - - newdoc files/fcron.conf fcron.conf.sample - doman doc/en/man/*.{1,5,8} - - for lang in fr; do - use l10n_${lang} || continue - - doman -i18n=${lang} doc/${lang}/man/*.{1,5,8} - - docinto html/${lang} - dodoc -r doc/${lang}/HTML/. - done -} - -pkg_postinst() { - if [[ -z "${REPLACING_VERSIONS}" ]]; then - # This is a new installation - elog "Make sure you execute" - elog "" - elog " # emerge --config ${CATEGORY}/${PN}" - elog "" - elog "to install the default systab on this system." - else - local v - for v in ${REPLACING_VERSIONS}; do - if ! version_is_at_least "3.2.1" ${v}; then - # This is an upgrade - - elog "fcron's default systab was updated since your last installation." - elog "You can use" - elog "" - elog " # emerge --config ${CATEGORY}/${PN}" - elog "" - elog "to re-install systab (do not call this command before you" - elog "have merged your configuration files)." - - # Show this elog only once - break - fi - done - fi - - if ! use system-crontab; then - echo "" - ewarn "Remember that fcron will *not* use /etc/cron.d in this configuration" - ewarn "due to USE=-system-crontab!" - echo "" - fi -} - -pkg_config() { - if [[ $(fcrontab -l -u systab 2>/dev/null) ]]; then - eerror "We're not going to make any change to your systab as long as" - eerror "it contains data; please clear it before proceeding." - eerror "You can do that with" - eerror "" - eerror " # fcrontab -u systab -r" - eerror "" - eerror "However you are advised to do this by hand to review existing" - eerror "systab just in case." - return 1 - fi - - if use system-crontab; then - elog "This is going to set up fcron to execute check_system_crontabs." - elog "In this configuration, /etc/crontab and /etc/cron.d are respected." - elog "Per default fcron will check for modifications every 10 minutes." - /usr/libexec/check_system_crontabs -v -i -f - else - elog "This is going to set up fcron to set up a default systab that" - elog "executes /etc/cron.{hourly,daily,weekly,monthly} but will ignore" - elog "/etc/crontab and /etc/cron.d." - fcrontab -u systab - <<- EOF - !serial(true) - 00 * * * * /bin/rm -f /var/spool/cron/lastrun/cron.hourly - 00 00 * * * /bin/rm -f /var/spool/cron/lastrun/cron.daily - 00 00 * * 6 /bin/rm -f /var/spool/cron/lastrun/cron.weekly - 00 00 1 * * /bin/rm -f /var/spool/cron/lastrun/cron.monthly - */10 * * * * /usr/bin/test -x /usr/sbin/run-crons && /usr/sbin/run-crons - !serial(false) - EOF - fi -} diff --git a/sys-process/fcron/fcron-3.2.1-r3.ebuild b/sys-process/fcron/fcron-3.2.1-r3.ebuild deleted file mode 100644 index a564610b6fc0..000000000000 --- a/sys-process/fcron/fcron-3.2.1-r3.ebuild +++ /dev/null @@ -1,258 +0,0 @@ -# Copyright 1999-2021 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI="6" - -WANT_AUTOMAKE=none - -inherit cron pam flag-o-matic user autotools versionator systemd - -DESCRIPTION="A command scheduler with extended capabilities over cron and anacron" -HOMEPAGE="http://fcron.free.fr/" -SRC_URI="http://fcron.free.fr/archives/${P}.src.tar.gz" - -LICENSE="GPL-2" -KEYWORDS="amd64 arm ~arm64 ~hppa ~ia64 ~mips ppc ppc64 sparc x86" -IUSE="audit debug pam selinux l10n_fr +mta +system-crontab readline" - -DEPEND="audit? ( sys-process/audit ) - pam? ( sys-libs/pam ) - readline? ( sys-libs/readline:= ) - selinux? ( sys-libs/libselinux )" - -RDEPEND="${DEPEND} - app-misc/editor-wrapper - mta? ( virtual/mta ) - pam? ( sys-auth/pambase )" - -PATCHES=( - "${FILESDIR}"/${PN}-3.1.1-noreadline.patch - "${FILESDIR}"/${PN}-3.2.1-configure-fix-audit-parameter-check.patch - "${FILESDIR}"/${PN}-3.2.1-musl-getopt-order.patch -) - -pkg_setup() { - enewgroup fcron - enewuser fcron -1 -1 -1 fcron - rootuser=$(egetent passwd 0 | cut -d ':' -f 1) - [[ ${rootuser} ]] || rootuser=root - rootgroup=$(egetent group 0 | cut -d ':' -f 1) - [[ ${rootgroup} ]] || rootgroup=root -} - -src_prepare() { - default - - # respect LDFLAGS - sed -i "s:\(@LIBS@\):\$(LDFLAGS) \1:" Makefile.in || die "sed failed" - - # Adjust fcrontab path - sed -i -e 's:/etc/fcrontab:/etc/fcron/fcrontab:' script/check_system_crontabs.sh || die - - mv configure.in configure.ac || die - - cp "${FILESDIR}"/crontab.2 "${WORKDIR}"/crontab || die - - eautoconf -} - -src_configure() { - # Don't try to pass --with-debug as it'll play with cflags as - # well, and run foreground which is a _very_ nasty idea for - # Gentoo. - use debug && append-cppflags -DDEBUG - - # bindir is used just for calling fcronsighup - econf \ - --with-cflags="${CFLAGS}" \ - --bindir=/usr/libexec \ - --sbindir=/usr/libexec \ - $(use_with audit) \ - $(use_with mta sendmail) \ - $(use_with pam) \ - $(use_with readline) \ - $(use_with selinux) \ - --sysconfdir=/etc/fcron \ - --with-username=fcron \ - --with-groupname=fcron \ - --with-piddir=/run \ - --with-spooldir=/var/spool/fcron \ - --with-fifodir=/run \ - --with-fcrondyn=yes \ - --disable-checks \ - --with-editor=/usr/libexec/editor \ - --with-shell=/bin/sh \ - --without-db2man \ - --without-dsssl-dir \ - --with-rootname=${rootuser} \ - --with-rootgroup=${rootgroup} \ - --with-systemdsystemunitdir="$(systemd_get_systemunitdir)" -} - -src_compile() { - default - - # bug #216460 - sed -i \ - -e 's:/usr/local/etc/fcron:/etc/fcron/fcron:g' \ - -e 's:/usr/local/etc:/etc:g' \ - -e 's:/usr/local/:/usr/:g' \ - doc/*/*/*.{txt,1,5,8,html} \ - || die "unable to fix documentation references" -} - -src_install() { - keepdir /var/spool/fcron - - exeinto /usr/libexec - doexe fcron fcronsighup - - dobin fcrondyn fcrontab - - insinto /etc/fcron - doins files/fcron.{allow,deny,conf} - - if use system-crontab; then - dosym fcrontab /usr/bin/crontab - - exeinto /usr/libexec - newexe script/check_system_crontabs.sh check_system_crontabs - - insinto /etc/fcron - newins "${FILESDIR}"/fcrontab.2 fcrontab - - fowners ${rootuser}:fcron /etc/fcron/fcrontab - fperms 0640 /etc/fcron/fcrontab - - insinto /etc - newins "${FILESDIR}"/crontab.2 crontab - fi - - fowners fcron:fcron \ - /var/spool/fcron \ - /usr/bin/fcron{dyn,tab} - - # fcronsighup needs to be suid root, because it sends a HUP to the - # running fcron daemon, but only has to be called by the fcron group - # anyway - fowners ${rootuser}:fcron \ - /usr/libexec/fcronsighup \ - /etc/fcron/fcron.{allow,deny,conf} \ - /etc/fcron - - fperms 6770 /var/spool/fcron - fperms 6775 /usr/bin/fcron{dyn,tab} - - fperms 4710 /usr/libexec/fcronsighup - - fperms 0750 /etc/fcron - fperms 0640 /etc/fcron/fcron.{allow,deny,conf} - - use pam && pamd_mimic system-services fcron auth account session - cat > "${T}"/fcrontab.pam <<- EOF - # Don't ask for the user's password; fcrontab will only allow to - # change user if running as root. - auth sufficient pam_permit.so - - # Still use the system-auth stack for account and session as the - # sysadmin might have set up stuff properly, and also avoids - # sidestepping limits (since fcrontab will run \$EDITOR). - account include system-auth - session include system-auth - EOF - use pam && newpamd "${T}"/fcrontab.pam fcrontab - - newinitd "${FILESDIR}"/fcron.init-r5 fcron - systemd_newunit "${S}/script/fcron.init.systemd" fcron.service - - newconfd "${FILESDIR}"/fcron.confd fcron - - local DOCS=( MANIFEST VERSION "${WORKDIR}/crontab") - DOCS+=( doc/en/txt/{readme,thanks,faq,todo,relnotes,changes}.txt ) - - local HTML_DOCS=( doc/en/HTML/. ) - - einstalldocs - - newdoc files/fcron.conf fcron.conf.sample - doman doc/en/man/*.{1,5,8} - - for lang in fr; do - use l10n_${lang} || continue - - doman -i18n=${lang} doc/${lang}/man/*.{1,5,8} - - docinto html/${lang} - dodoc -r doc/${lang}/HTML/. - done -} - -pkg_postinst() { - if [[ -z "${REPLACING_VERSIONS}" ]]; then - # This is a new installation - elog "Make sure you execute" - elog "" - elog " # emerge --config ${CATEGORY}/${PN}" - elog "" - elog "to install the default systab on this system." - else - local v - for v in ${REPLACING_VERSIONS}; do - if ! version_is_at_least "3.2.1" ${v}; then - # This is an upgrade - - elog "fcron's default systab was updated since your last installation." - elog "You can use" - elog "" - elog " # emerge --config ${CATEGORY}/${PN}" - elog "" - elog "to re-install systab (do not call this command before you" - elog "have merged your configuration files)." - - # Show this elog only once - break - fi - done - fi - - if ! use system-crontab; then - echo "" - ewarn "Remember that fcron will *not* use /etc/cron.d in this configuration" - ewarn "due to USE=-system-crontab!" - echo "" - fi -} - -pkg_config() { - if [[ $(fcrontab -l -u systab 2>/dev/null) ]]; then - eerror "We're not going to make any change to your systab as long as" - eerror "it contains data; please clear it before proceeding." - eerror "You can do that with" - eerror "" - eerror " # fcrontab -u systab -r" - eerror "" - eerror "However you are advised to do this by hand to review existing" - eerror "systab just in case." - return 1 - fi - - if use system-crontab; then - elog "This is going to set up fcron to execute check_system_crontabs." - elog "In this configuration, /etc/crontab and /etc/cron.d are respected." - elog "Per default fcron will check for modifications every 10 minutes." - /usr/libexec/check_system_crontabs -v -i -f - else - elog "This is going to set up fcron to set up a default systab that" - elog "executes /etc/cron.{hourly,daily,weekly,monthly} but will ignore" - elog "/etc/crontab and /etc/cron.d." - fcrontab -u systab - <<- EOF - !serial(true) - 00 * * * * /bin/rm -f /var/spool/cron/lastrun/cron.hourly - 00 00 * * * /bin/rm -f /var/spool/cron/lastrun/cron.daily - 00 00 * * 6 /bin/rm -f /var/spool/cron/lastrun/cron.weekly - 00 00 1 * * /bin/rm -f /var/spool/cron/lastrun/cron.monthly - */10 * * * * /usr/bin/test -x /usr/sbin/run-crons && /usr/sbin/run-crons - !serial(false) - EOF - fi -} diff --git a/sys-process/fcron/fcron-3.2.1-r4.ebuild b/sys-process/fcron/fcron-3.2.1-r4.ebuild new file mode 100644 index 000000000000..1c7ecc01a742 --- /dev/null +++ b/sys-process/fcron/fcron-3.2.1-r4.ebuild @@ -0,0 +1,256 @@ +# Copyright 1999-2021 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI="6" + +WANT_AUTOMAKE=none + +inherit cron pam flag-o-matic user autotools versionator systemd + +DESCRIPTION="A command scheduler with extended capabilities over cron and anacron" +HOMEPAGE="http://fcron.free.fr/" +SRC_URI="http://fcron.free.fr/archives/${P}.src.tar.gz" + +LICENSE="GPL-2" +KEYWORDS="amd64 arm ~hppa ~ia64 ~mips ppc ppc64 sparc x86" +IUSE="audit debug pam selinux l10n_fr +mta +system-crontab readline" + +DEPEND="virtual/libcrypt:= + audit? ( sys-process/audit ) + pam? ( sys-libs/pam ) + readline? ( sys-libs/readline:= ) + selinux? ( sys-libs/libselinux )" + +RDEPEND="${DEPEND} + app-misc/editor-wrapper + mta? ( virtual/mta ) + pam? ( sys-auth/pambase )" + +PATCHES=( + "${FILESDIR}"/${PN}-3.1.1-noreadline.patch + "${FILESDIR}"/${PN}-3.2.1-configure-fix-audit-parameter-check.patch +) + +pkg_setup() { + enewgroup fcron + enewuser fcron -1 -1 -1 fcron + rootuser=$(egetent passwd 0 | cut -d ':' -f 1) + [[ ${rootuser} ]] || rootuser=root + rootgroup=$(egetent group 0 | cut -d ':' -f 1) + [[ ${rootgroup} ]] || rootgroup=root +} + +src_prepare() { + default + + # respect LDFLAGS + sed -i "s:\(@LIBS@\):\$(LDFLAGS) \1:" Makefile.in || die "sed failed" + + # Adjust fcrontab path + sed -i -e 's:/etc/fcrontab:/etc/fcron/fcrontab:' script/check_system_crontabs.sh || die + + mv configure.in configure.ac || die + + cp "${FILESDIR}"/crontab.2 "${WORKDIR}"/crontab || die + + eautoconf +} + +src_configure() { + # Don't try to pass --with-debug as it'll play with cflags as + # well, and run foreground which is a _very_ nasty idea for + # Gentoo. + use debug && append-cppflags -DDEBUG + + # bindir is used just for calling fcronsighup + econf \ + --with-cflags="${CFLAGS}" \ + --bindir=/usr/libexec \ + --sbindir=/usr/libexec \ + $(use_with audit) \ + $(use_with mta sendmail) \ + $(use_with pam) \ + $(use_with readline) \ + $(use_with selinux) \ + --sysconfdir=/etc/fcron \ + --with-username=fcron \ + --with-groupname=fcron \ + --with-piddir=/run \ + --with-spooldir=/var/spool/fcron \ + --with-fifodir=/run \ + --with-fcrondyn=yes \ + --disable-checks \ + --with-editor=/usr/libexec/editor \ + --with-shell=/bin/sh \ + --without-db2man \ + --without-dsssl-dir \ + --with-rootname=${rootuser} \ + --with-rootgroup=${rootgroup} \ + --with-systemdsystemunitdir="$(systemd_get_systemunitdir)" +} + +src_compile() { + default + + # bug #216460 + sed -i \ + -e 's:/usr/local/etc/fcron:/etc/fcron/fcron:g' \ + -e 's:/usr/local/etc:/etc:g' \ + -e 's:/usr/local/:/usr/:g' \ + doc/*/*/*.{txt,1,5,8,html} \ + || die "unable to fix documentation references" +} + +src_install() { + keepdir /var/spool/fcron + + exeinto /usr/libexec + doexe fcron fcronsighup + + dobin fcrondyn fcrontab + + insinto /etc/fcron + doins files/fcron.{allow,deny,conf} + + if use system-crontab; then + dosym fcrontab /usr/bin/crontab + + exeinto /usr/libexec + newexe script/check_system_crontabs.sh check_system_crontabs + + insinto /etc/fcron + newins "${FILESDIR}"/fcrontab.2 fcrontab + + fowners ${rootuser}:fcron /etc/fcron/fcrontab + fperms 0640 /etc/fcron/fcrontab + + insinto /etc + newins "${FILESDIR}"/crontab.2 crontab + fi + + fowners fcron:fcron \ + /var/spool/fcron \ + /usr/bin/fcron{dyn,tab} + + # fcronsighup needs to be suid root, because it sends a HUP to the + # running fcron daemon, but only has to be called by the fcron group + # anyway + fowners ${rootuser}:fcron \ + /usr/libexec/fcronsighup \ + /etc/fcron/fcron.{allow,deny,conf} \ + /etc/fcron + + fperms 6770 /var/spool/fcron + fperms 6775 /usr/bin/fcron{dyn,tab} + + fperms 4710 /usr/libexec/fcronsighup + + fperms 0750 /etc/fcron + fperms 0640 /etc/fcron/fcron.{allow,deny,conf} + + use pam && pamd_mimic system-services fcron auth account session + cat > "${T}"/fcrontab.pam <<- EOF + # Don't ask for the user's password; fcrontab will only allow to + # change user if running as root. + auth sufficient pam_permit.so + + # Still use the system-auth stack for account and session as the + # sysadmin might have set up stuff properly, and also avoids + # sidestepping limits (since fcrontab will run \$EDITOR). + account include system-auth + session include system-auth + EOF + use pam && newpamd "${T}"/fcrontab.pam fcrontab + + newinitd "${FILESDIR}"/fcron.init.4 fcron + systemd_newunit "${S}/script/fcron.init.systemd" fcron.service + + local DOCS=( MANIFEST VERSION "${WORKDIR}/crontab") + DOCS+=( doc/en/txt/{readme,thanks,faq,todo,relnotes,changes}.txt ) + + local HTML_DOCS=( doc/en/HTML/. ) + + einstalldocs + + newdoc files/fcron.conf fcron.conf.sample + doman doc/en/man/*.{1,5,8} + + for lang in fr; do + use l10n_${lang} || continue + + doman -i18n=${lang} doc/${lang}/man/*.{1,5,8} + + docinto html/${lang} + dodoc -r doc/${lang}/HTML/. + done +} + +pkg_postinst() { + if [[ -z "${REPLACING_VERSIONS}" ]]; then + # This is a new installation + elog "Make sure you execute" + elog "" + elog " # emerge --config ${CATEGORY}/${PN}" + elog "" + elog "to install the default systab on this system." + else + local v + for v in ${REPLACING_VERSIONS}; do + if ! version_is_at_least "3.2.1" ${v}; then + # This is an upgrade + + elog "fcron's default systab was updated since your last installation." + elog "You can use" + elog "" + elog " # emerge --config ${CATEGORY}/${PN}" + elog "" + elog "to re-install systab (do not call this command before you" + elog "have merged your configuration files)." + + # Show this elog only once + break + fi + done + fi + + if ! use system-crontab; then + echo "" + ewarn "Remember that fcron will *not* use /etc/cron.d in this configuration" + ewarn "due to USE=-system-crontab!" + echo "" + fi +} + +pkg_config() { + if [[ $(fcrontab -l -u systab 2>/dev/null) ]]; then + eerror "We're not going to make any change to your systab as long as" + eerror "it contains data; please clear it before proceeding." + eerror "You can do that with" + eerror "" + eerror " # fcrontab -u systab -r" + eerror "" + eerror "However you are advised to do this by hand to review existing" + eerror "systab just in case." + return 1 + fi + + if use system-crontab; then + elog "This is going to set up fcron to execute check_system_crontabs." + elog "In this configuration, /etc/crontab and /etc/cron.d are respected." + elog "Per default fcron will check for modifications every 10 minutes." + /usr/libexec/check_system_crontabs -v -i -f + else + elog "This is going to set up fcron to set up a default systab that" + elog "executes /etc/cron.{hourly,daily,weekly,monthly} but will ignore" + elog "/etc/crontab and /etc/cron.d." + fcrontab -u systab - <<- EOF + !serial(true) + 00 * * * * /bin/rm -f /var/spool/cron/lastrun/cron.hourly + 00 00 * * * /bin/rm -f /var/spool/cron/lastrun/cron.daily + 00 00 * * 6 /bin/rm -f /var/spool/cron/lastrun/cron.weekly + 00 00 1 * * /bin/rm -f /var/spool/cron/lastrun/cron.monthly + */10 * * * * /usr/bin/test -x /usr/sbin/run-crons && /usr/sbin/run-crons + !serial(false) + EOF + fi +} diff --git a/sys-process/fcron/fcron-3.2.1-r5.ebuild b/sys-process/fcron/fcron-3.2.1-r5.ebuild new file mode 100644 index 000000000000..fefe1afcd1b9 --- /dev/null +++ b/sys-process/fcron/fcron-3.2.1-r5.ebuild @@ -0,0 +1,259 @@ +# Copyright 1999-2021 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI="6" + +WANT_AUTOMAKE=none + +inherit cron pam flag-o-matic user autotools versionator systemd + +DESCRIPTION="A command scheduler with extended capabilities over cron and anacron" +HOMEPAGE="http://fcron.free.fr/" +SRC_URI="http://fcron.free.fr/archives/${P}.src.tar.gz" + +LICENSE="GPL-2" +KEYWORDS="amd64 arm ~arm64 ~hppa ~ia64 ~mips ppc ppc64 sparc x86" +IUSE="audit debug pam selinux l10n_fr +mta +system-crontab readline" + +DEPEND="virtual/libcrypt:= + audit? ( sys-process/audit ) + pam? ( sys-libs/pam ) + readline? ( sys-libs/readline:= ) + selinux? ( sys-libs/libselinux )" + +RDEPEND="${DEPEND} + app-misc/editor-wrapper + mta? ( virtual/mta ) + pam? ( sys-auth/pambase )" + +PATCHES=( + "${FILESDIR}"/${PN}-3.1.1-noreadline.patch + "${FILESDIR}"/${PN}-3.2.1-configure-fix-audit-parameter-check.patch + "${FILESDIR}"/${PN}-3.2.1-musl-getopt-order.patch +) + +pkg_setup() { + enewgroup fcron + enewuser fcron -1 -1 -1 fcron + rootuser=$(egetent passwd 0 | cut -d ':' -f 1) + [[ ${rootuser} ]] || rootuser=root + rootgroup=$(egetent group 0 | cut -d ':' -f 1) + [[ ${rootgroup} ]] || rootgroup=root +} + +src_prepare() { + default + + # respect LDFLAGS + sed -i "s:\(@LIBS@\):\$(LDFLAGS) \1:" Makefile.in || die "sed failed" + + # Adjust fcrontab path + sed -i -e 's:/etc/fcrontab:/etc/fcron/fcrontab:' script/check_system_crontabs.sh || die + + mv configure.in configure.ac || die + + cp "${FILESDIR}"/crontab.2 "${WORKDIR}"/crontab || die + + eautoconf +} + +src_configure() { + # Don't try to pass --with-debug as it'll play with cflags as + # well, and run foreground which is a _very_ nasty idea for + # Gentoo. + use debug && append-cppflags -DDEBUG + + # bindir is used just for calling fcronsighup + econf \ + --with-cflags="${CFLAGS}" \ + --bindir=/usr/libexec \ + --sbindir=/usr/libexec \ + $(use_with audit) \ + $(use_with mta sendmail) \ + $(use_with pam) \ + $(use_with readline) \ + $(use_with selinux) \ + --sysconfdir=/etc/fcron \ + --with-username=fcron \ + --with-groupname=fcron \ + --with-piddir=/run \ + --with-spooldir=/var/spool/fcron \ + --with-fifodir=/run \ + --with-fcrondyn=yes \ + --disable-checks \ + --with-editor=/usr/libexec/editor \ + --with-shell=/bin/sh \ + --without-db2man \ + --without-dsssl-dir \ + --with-rootname=${rootuser} \ + --with-rootgroup=${rootgroup} \ + --with-systemdsystemunitdir="$(systemd_get_systemunitdir)" +} + +src_compile() { + default + + # bug #216460 + sed -i \ + -e 's:/usr/local/etc/fcron:/etc/fcron/fcron:g' \ + -e 's:/usr/local/etc:/etc:g' \ + -e 's:/usr/local/:/usr/:g' \ + doc/*/*/*.{txt,1,5,8,html} \ + || die "unable to fix documentation references" +} + +src_install() { + keepdir /var/spool/fcron + + exeinto /usr/libexec + doexe fcron fcronsighup + + dobin fcrondyn fcrontab + + insinto /etc/fcron + doins files/fcron.{allow,deny,conf} + + if use system-crontab; then + dosym fcrontab /usr/bin/crontab + + exeinto /usr/libexec + newexe script/check_system_crontabs.sh check_system_crontabs + + insinto /etc/fcron + newins "${FILESDIR}"/fcrontab.2 fcrontab + + fowners ${rootuser}:fcron /etc/fcron/fcrontab + fperms 0640 /etc/fcron/fcrontab + + insinto /etc + newins "${FILESDIR}"/crontab.2 crontab + fi + + fowners fcron:fcron \ + /var/spool/fcron \ + /usr/bin/fcron{dyn,tab} + + # fcronsighup needs to be suid root, because it sends a HUP to the + # running fcron daemon, but only has to be called by the fcron group + # anyway + fowners ${rootuser}:fcron \ + /usr/libexec/fcronsighup \ + /etc/fcron/fcron.{allow,deny,conf} \ + /etc/fcron + + fperms 6770 /var/spool/fcron + fperms 6775 /usr/bin/fcron{dyn,tab} + + fperms 4710 /usr/libexec/fcronsighup + + fperms 0750 /etc/fcron + fperms 0640 /etc/fcron/fcron.{allow,deny,conf} + + use pam && pamd_mimic system-services fcron auth account session + cat > "${T}"/fcrontab.pam <<- EOF + # Don't ask for the user's password; fcrontab will only allow to + # change user if running as root. + auth sufficient pam_permit.so + + # Still use the system-auth stack for account and session as the + # sysadmin might have set up stuff properly, and also avoids + # sidestepping limits (since fcrontab will run \$EDITOR). + account include system-auth + session include system-auth + EOF + use pam && newpamd "${T}"/fcrontab.pam fcrontab + + newinitd "${FILESDIR}"/fcron.init-r5 fcron + systemd_newunit "${S}/script/fcron.init.systemd" fcron.service + + newconfd "${FILESDIR}"/fcron.confd fcron + + local DOCS=( MANIFEST VERSION "${WORKDIR}/crontab") + DOCS+=( doc/en/txt/{readme,thanks,faq,todo,relnotes,changes}.txt ) + + local HTML_DOCS=( doc/en/HTML/. ) + + einstalldocs + + newdoc files/fcron.conf fcron.conf.sample + doman doc/en/man/*.{1,5,8} + + for lang in fr; do + use l10n_${lang} || continue + + doman -i18n=${lang} doc/${lang}/man/*.{1,5,8} + + docinto html/${lang} + dodoc -r doc/${lang}/HTML/. + done +} + +pkg_postinst() { + if [[ -z "${REPLACING_VERSIONS}" ]]; then + # This is a new installation + elog "Make sure you execute" + elog "" + elog " # emerge --config ${CATEGORY}/${PN}" + elog "" + elog "to install the default systab on this system." + else + local v + for v in ${REPLACING_VERSIONS}; do + if ! version_is_at_least "3.2.1" ${v}; then + # This is an upgrade + + elog "fcron's default systab was updated since your last installation." + elog "You can use" + elog "" + elog " # emerge --config ${CATEGORY}/${PN}" + elog "" + elog "to re-install systab (do not call this command before you" + elog "have merged your configuration files)." + + # Show this elog only once + break + fi + done + fi + + if ! use system-crontab; then + echo "" + ewarn "Remember that fcron will *not* use /etc/cron.d in this configuration" + ewarn "due to USE=-system-crontab!" + echo "" + fi +} + +pkg_config() { + if [[ $(fcrontab -l -u systab 2>/dev/null) ]]; then + eerror "We're not going to make any change to your systab as long as" + eerror "it contains data; please clear it before proceeding." + eerror "You can do that with" + eerror "" + eerror " # fcrontab -u systab -r" + eerror "" + eerror "However you are advised to do this by hand to review existing" + eerror "systab just in case." + return 1 + fi + + if use system-crontab; then + elog "This is going to set up fcron to execute check_system_crontabs." + elog "In this configuration, /etc/crontab and /etc/cron.d are respected." + elog "Per default fcron will check for modifications every 10 minutes." + /usr/libexec/check_system_crontabs -v -i -f + else + elog "This is going to set up fcron to set up a default systab that" + elog "executes /etc/cron.{hourly,daily,weekly,monthly} but will ignore" + elog "/etc/crontab and /etc/cron.d." + fcrontab -u systab - <<- EOF + !serial(true) + 00 * * * * /bin/rm -f /var/spool/cron/lastrun/cron.hourly + 00 00 * * * /bin/rm -f /var/spool/cron/lastrun/cron.daily + 00 00 * * 6 /bin/rm -f /var/spool/cron/lastrun/cron.weekly + 00 00 1 * * /bin/rm -f /var/spool/cron/lastrun/cron.monthly + */10 * * * * /usr/bin/test -x /usr/sbin/run-crons && /usr/sbin/run-crons + !serial(false) + EOF + fi +} diff --git a/sys-process/fcron/fcron-3.3.0_beta-r1.ebuild b/sys-process/fcron/fcron-3.3.0_beta-r1.ebuild deleted file mode 100644 index 0e7915a8d603..000000000000 --- a/sys-process/fcron/fcron-3.3.0_beta-r1.ebuild +++ /dev/null @@ -1,263 +0,0 @@ -# Copyright 1999-2021 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI="6" - -WANT_AUTOMAKE=none - -inherit cron pam flag-o-matic user autotools versionator systemd - -MY_PV=${PV/_beta/} -MY_P=${PN}-${MY_PV} - -DESCRIPTION="A command scheduler with extended capabilities over cron and anacron" -HOMEPAGE="http://fcron.free.fr/" -SRC_URI="http://fcron.free.fr/archives/${MY_P}.src.tar.gz -> ${P}.tar.gz" - -LICENSE="GPL-2" -KEYWORDS="" -IUSE="audit debug pam selinux l10n_fr +mta +system-crontab readline" - -DEPEND="audit? ( sys-process/audit ) - pam? ( sys-libs/pam ) - readline? ( sys-libs/readline:= ) - selinux? ( sys-libs/libselinux )" - -RDEPEND="${DEPEND} - app-misc/editor-wrapper - mta? ( virtual/mta ) - pam? ( sys-auth/pambase )" - -PATCHES=( - "${FILESDIR}"/${PN}-3.1.1-noreadline.patch - "${FILESDIR}"/${PN}-3.2.1-configure-fix-audit-parameter-check.patch - "${FILESDIR}"/${PN}-3.2.1-musl-getopt-order.patch -) - -S="${WORKDIR}/${MY_P}" - -pkg_setup() { - enewgroup fcron - enewuser fcron -1 -1 -1 fcron - rootuser=$(egetent passwd 0 | cut -d ':' -f 1) - [[ ${rootuser} ]] || rootuser=root - rootgroup=$(egetent group 0 | cut -d ':' -f 1) - [[ ${rootgroup} ]] || rootgroup=root -} - -src_prepare() { - default - - # respect LDFLAGS - sed -i "s:\(@LIBS@\):\$(LDFLAGS) \1:" Makefile.in || die "sed failed" - - # Adjust fcrontab path - sed -i -e 's:/etc/fcrontab:/etc/fcron/fcrontab:' script/check_system_crontabs.sh || die - - mv configure.in configure.ac || die - - cp "${FILESDIR}"/crontab.2 "${WORKDIR}"/crontab || die - - eautoconf -} - -src_configure() { - # Don't try to pass --with-debug as it'll play with cflags as - # well, and run foreground which is a _very_ nasty idea for - # Gentoo. - use debug && append-cppflags -DDEBUG - - # bindir is used just for calling fcronsighup - econf \ - --with-cflags="${CFLAGS}" \ - --bindir=/usr/libexec \ - --sbindir=/usr/libexec \ - $(use_with audit) \ - $(use_with mta sendmail) \ - $(use_with pam) \ - $(use_with readline) \ - $(use_with selinux) \ - --sysconfdir=/etc/fcron \ - --with-username=fcron \ - --with-groupname=fcron \ - --with-piddir=/run \ - --with-spooldir=/var/spool/fcron \ - --with-fifodir=/run \ - --with-fcrondyn=yes \ - --disable-checks \ - --with-editor=/usr/libexec/editor \ - --with-shell=/bin/sh \ - --without-db2man \ - --without-dsssl-dir \ - --with-rootname=${rootuser} \ - --with-rootgroup=${rootgroup} \ - --with-systemdsystemunitdir="$(systemd_get_systemunitdir)" -} - -src_compile() { - default - - # bug #216460 - sed -i \ - -e 's:/usr/local/etc/fcron:/etc/fcron/fcron:g' \ - -e 's:/usr/local/etc:/etc:g' \ - -e 's:/usr/local/:/usr/:g' \ - doc/*/*/*.{txt,1,5,8,html} \ - || die "unable to fix documentation references" -} - -src_install() { - keepdir /var/spool/fcron - - exeinto /usr/libexec - doexe fcron fcronsighup - - dobin fcrondyn fcrontab - - insinto /etc/fcron - doins files/fcron.{allow,deny,conf} - - if use system-crontab; then - dosym fcrontab /usr/bin/crontab - - exeinto /usr/libexec - newexe script/check_system_crontabs.sh check_system_crontabs - - insinto /etc/fcron - newins "${FILESDIR}"/fcrontab.2 fcrontab - - fowners ${rootuser}:fcron /etc/fcron/fcrontab - fperms 0640 /etc/fcron/fcrontab - - insinto /etc - newins "${FILESDIR}"/crontab.2 crontab - fi - - fowners fcron:fcron \ - /var/spool/fcron \ - /usr/bin/fcron{dyn,tab} - - # fcronsighup needs to be suid root, because it sends a HUP to the - # running fcron daemon, but only has to be called by the fcron group - # anyway - fowners ${rootuser}:fcron \ - /usr/libexec/fcronsighup \ - /etc/fcron/fcron.{allow,deny,conf} \ - /etc/fcron - - fperms 6770 /var/spool/fcron - fperms 6775 /usr/bin/fcron{dyn,tab} - - fperms 4710 /usr/libexec/fcronsighup - - fperms 0750 /etc/fcron - fperms 0640 /etc/fcron/fcron.{allow,deny,conf} - - use pam && pamd_mimic system-services fcron auth account session - cat > "${T}"/fcrontab.pam <<- EOF - # Don't ask for the user's password; fcrontab will only allow to - # change user if running as root. - auth sufficient pam_permit.so - - # Still use the system-auth stack for account and session as the - # sysadmin might have set up stuff properly, and also avoids - # sidestepping limits (since fcrontab will run \$EDITOR). - account include system-auth - session include system-auth - EOF - use pam && newpamd "${T}"/fcrontab.pam fcrontab - - newinitd "${FILESDIR}"/fcron.init-r5 fcron - systemd_newunit "${S}/script/fcron.init.systemd" fcron.service - - newconfd "${FILESDIR}"/fcron.confd fcron - - local DOCS=( MANIFEST VERSION "${WORKDIR}/crontab") - DOCS+=( doc/en/txt/{readme,thanks,faq,todo,relnotes,changes}.txt ) - - local HTML_DOCS=( doc/en/HTML/. ) - - einstalldocs - - newdoc files/fcron.conf fcron.conf.sample - doman doc/en/man/*.{1,5,8} - - for lang in fr; do - use l10n_${lang} || continue - - doman -i18n=${lang} doc/${lang}/man/*.{1,5,8} - - docinto html/${lang} - dodoc -r doc/${lang}/HTML/. - done -} - -pkg_postinst() { - if [[ -z "${REPLACING_VERSIONS}" ]]; then - # This is a new installation - elog "Make sure you execute" - elog "" - elog " # emerge --config ${CATEGORY}/${PN}" - elog "" - elog "to install the default systab on this system." - else - local v - for v in ${REPLACING_VERSIONS}; do - if ! version_is_at_least "3.2.1" ${v}; then - # This is an upgrade - - elog "fcron's default systab was updated since your last installation." - elog "You can use" - elog "" - elog " # emerge --config ${CATEGORY}/${PN}" - elog "" - elog "to re-install systab (do not call this command before you" - elog "have merged your configuration files)." - - # Show this elog only once - break - fi - done - fi - - if ! use system-crontab; then - echo "" - ewarn "Remember that fcron will *not* use /etc/cron.d in this configuration" - ewarn "due to USE=-system-crontab!" - echo "" - fi -} - -pkg_config() { - if [[ $(fcrontab -l -u systab 2>/dev/null) ]]; then - eerror "We're not going to make any change to your systab as long as" - eerror "it contains data; please clear it before proceeding." - eerror "You can do that with" - eerror "" - eerror " # fcrontab -u systab -r" - eerror "" - eerror "However you are advised to do this by hand to review existing" - eerror "systab just in case." - return 1 - fi - - if use system-crontab; then - elog "This is going to set up fcron to execute check_system_crontabs." - elog "In this configuration, /etc/crontab and /etc/cron.d are respected." - elog "Per default fcron will check for modifications every 10 minutes." - /usr/libexec/check_system_crontabs -v -i -f - else - elog "This is going to set up fcron to set up a default systab that" - elog "executes /etc/cron.{hourly,daily,weekly,monthly} but will ignore" - elog "/etc/crontab and /etc/cron.d." - fcrontab -u systab - <<- EOF - !serial(true) - 00 * * * * /bin/rm -f /var/spool/cron/lastrun/cron.hourly - 00 00 * * * /bin/rm -f /var/spool/cron/lastrun/cron.daily - 00 00 * * 6 /bin/rm -f /var/spool/cron/lastrun/cron.weekly - 00 00 1 * * /bin/rm -f /var/spool/cron/lastrun/cron.monthly - */10 * * * * /usr/bin/test -x /usr/sbin/run-crons && /usr/sbin/run-crons - !serial(false) - EOF - fi -} diff --git a/sys-process/fcron/fcron-3.3.0_beta-r2.ebuild b/sys-process/fcron/fcron-3.3.0_beta-r2.ebuild new file mode 100644 index 000000000000..f670bb69dd3d --- /dev/null +++ b/sys-process/fcron/fcron-3.3.0_beta-r2.ebuild @@ -0,0 +1,264 @@ +# Copyright 1999-2021 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI="6" + +WANT_AUTOMAKE=none + +inherit cron pam flag-o-matic user autotools versionator systemd + +MY_PV=${PV/_beta/} +MY_P=${PN}-${MY_PV} + +DESCRIPTION="A command scheduler with extended capabilities over cron and anacron" +HOMEPAGE="http://fcron.free.fr/" +SRC_URI="http://fcron.free.fr/archives/${MY_P}.src.tar.gz -> ${P}.tar.gz" + +LICENSE="GPL-2" +KEYWORDS="" +IUSE="audit debug pam selinux l10n_fr +mta +system-crontab readline" + +DEPEND="virtual/libcrypt:= + audit? ( sys-process/audit ) + pam? ( sys-libs/pam ) + readline? ( sys-libs/readline:= ) + selinux? ( sys-libs/libselinux )" + +RDEPEND="${DEPEND} + app-misc/editor-wrapper + mta? ( virtual/mta ) + pam? ( sys-auth/pambase )" + +PATCHES=( + "${FILESDIR}"/${PN}-3.1.1-noreadline.patch + "${FILESDIR}"/${PN}-3.2.1-configure-fix-audit-parameter-check.patch + "${FILESDIR}"/${PN}-3.2.1-musl-getopt-order.patch +) + +S="${WORKDIR}/${MY_P}" + +pkg_setup() { + enewgroup fcron + enewuser fcron -1 -1 -1 fcron + rootuser=$(egetent passwd 0 | cut -d ':' -f 1) + [[ ${rootuser} ]] || rootuser=root + rootgroup=$(egetent group 0 | cut -d ':' -f 1) + [[ ${rootgroup} ]] || rootgroup=root +} + +src_prepare() { + default + + # respect LDFLAGS + sed -i "s:\(@LIBS@\):\$(LDFLAGS) \1:" Makefile.in || die "sed failed" + + # Adjust fcrontab path + sed -i -e 's:/etc/fcrontab:/etc/fcron/fcrontab:' script/check_system_crontabs.sh || die + + mv configure.in configure.ac || die + + cp "${FILESDIR}"/crontab.2 "${WORKDIR}"/crontab || die + + eautoconf +} + +src_configure() { + # Don't try to pass --with-debug as it'll play with cflags as + # well, and run foreground which is a _very_ nasty idea for + # Gentoo. + use debug && append-cppflags -DDEBUG + + # bindir is used just for calling fcronsighup + econf \ + --with-cflags="${CFLAGS}" \ + --bindir=/usr/libexec \ + --sbindir=/usr/libexec \ + $(use_with audit) \ + $(use_with mta sendmail) \ + $(use_with pam) \ + $(use_with readline) \ + $(use_with selinux) \ + --sysconfdir=/etc/fcron \ + --with-username=fcron \ + --with-groupname=fcron \ + --with-piddir=/run \ + --with-spooldir=/var/spool/fcron \ + --with-fifodir=/run \ + --with-fcrondyn=yes \ + --disable-checks \ + --with-editor=/usr/libexec/editor \ + --with-shell=/bin/sh \ + --without-db2man \ + --without-dsssl-dir \ + --with-rootname=${rootuser} \ + --with-rootgroup=${rootgroup} \ + --with-systemdsystemunitdir="$(systemd_get_systemunitdir)" +} + +src_compile() { + default + + # bug #216460 + sed -i \ + -e 's:/usr/local/etc/fcron:/etc/fcron/fcron:g' \ + -e 's:/usr/local/etc:/etc:g' \ + -e 's:/usr/local/:/usr/:g' \ + doc/*/*/*.{txt,1,5,8,html} \ + || die "unable to fix documentation references" +} + +src_install() { + keepdir /var/spool/fcron + + exeinto /usr/libexec + doexe fcron fcronsighup + + dobin fcrondyn fcrontab + + insinto /etc/fcron + doins files/fcron.{allow,deny,conf} + + if use system-crontab; then + dosym fcrontab /usr/bin/crontab + + exeinto /usr/libexec + newexe script/check_system_crontabs.sh check_system_crontabs + + insinto /etc/fcron + newins "${FILESDIR}"/fcrontab.2 fcrontab + + fowners ${rootuser}:fcron /etc/fcron/fcrontab + fperms 0640 /etc/fcron/fcrontab + + insinto /etc + newins "${FILESDIR}"/crontab.2 crontab + fi + + fowners fcron:fcron \ + /var/spool/fcron \ + /usr/bin/fcron{dyn,tab} + + # fcronsighup needs to be suid root, because it sends a HUP to the + # running fcron daemon, but only has to be called by the fcron group + # anyway + fowners ${rootuser}:fcron \ + /usr/libexec/fcronsighup \ + /etc/fcron/fcron.{allow,deny,conf} \ + /etc/fcron + + fperms 6770 /var/spool/fcron + fperms 6775 /usr/bin/fcron{dyn,tab} + + fperms 4710 /usr/libexec/fcronsighup + + fperms 0750 /etc/fcron + fperms 0640 /etc/fcron/fcron.{allow,deny,conf} + + use pam && pamd_mimic system-services fcron auth account session + cat > "${T}"/fcrontab.pam <<- EOF + # Don't ask for the user's password; fcrontab will only allow to + # change user if running as root. + auth sufficient pam_permit.so + + # Still use the system-auth stack for account and session as the + # sysadmin might have set up stuff properly, and also avoids + # sidestepping limits (since fcrontab will run \$EDITOR). + account include system-auth + session include system-auth + EOF + use pam && newpamd "${T}"/fcrontab.pam fcrontab + + newinitd "${FILESDIR}"/fcron.init-r5 fcron + systemd_newunit "${S}/script/fcron.init.systemd" fcron.service + + newconfd "${FILESDIR}"/fcron.confd fcron + + local DOCS=( MANIFEST VERSION "${WORKDIR}/crontab") + DOCS+=( doc/en/txt/{readme,thanks,faq,todo,relnotes,changes}.txt ) + + local HTML_DOCS=( doc/en/HTML/. ) + + einstalldocs + + newdoc files/fcron.conf fcron.conf.sample + doman doc/en/man/*.{1,5,8} + + for lang in fr; do + use l10n_${lang} || continue + + doman -i18n=${lang} doc/${lang}/man/*.{1,5,8} + + docinto html/${lang} + dodoc -r doc/${lang}/HTML/. + done +} + +pkg_postinst() { + if [[ -z "${REPLACING_VERSIONS}" ]]; then + # This is a new installation + elog "Make sure you execute" + elog "" + elog " # emerge --config ${CATEGORY}/${PN}" + elog "" + elog "to install the default systab on this system." + else + local v + for v in ${REPLACING_VERSIONS}; do + if ! version_is_at_least "3.2.1" ${v}; then + # This is an upgrade + + elog "fcron's default systab was updated since your last installation." + elog "You can use" + elog "" + elog " # emerge --config ${CATEGORY}/${PN}" + elog "" + elog "to re-install systab (do not call this command before you" + elog "have merged your configuration files)." + + # Show this elog only once + break + fi + done + fi + + if ! use system-crontab; then + echo "" + ewarn "Remember that fcron will *not* use /etc/cron.d in this configuration" + ewarn "due to USE=-system-crontab!" + echo "" + fi +} + +pkg_config() { + if [[ $(fcrontab -l -u systab 2>/dev/null) ]]; then + eerror "We're not going to make any change to your systab as long as" + eerror "it contains data; please clear it before proceeding." + eerror "You can do that with" + eerror "" + eerror " # fcrontab -u systab -r" + eerror "" + eerror "However you are advised to do this by hand to review existing" + eerror "systab just in case." + return 1 + fi + + if use system-crontab; then + elog "This is going to set up fcron to execute check_system_crontabs." + elog "In this configuration, /etc/crontab and /etc/cron.d are respected." + elog "Per default fcron will check for modifications every 10 minutes." + /usr/libexec/check_system_crontabs -v -i -f + else + elog "This is going to set up fcron to set up a default systab that" + elog "executes /etc/cron.{hourly,daily,weekly,monthly} but will ignore" + elog "/etc/crontab and /etc/cron.d." + fcrontab -u systab - <<- EOF + !serial(true) + 00 * * * * /bin/rm -f /var/spool/cron/lastrun/cron.hourly + 00 00 * * * /bin/rm -f /var/spool/cron/lastrun/cron.daily + 00 00 * * 6 /bin/rm -f /var/spool/cron/lastrun/cron.weekly + 00 00 1 * * /bin/rm -f /var/spool/cron/lastrun/cron.monthly + */10 * * * * /usr/bin/test -x /usr/sbin/run-crons && /usr/sbin/run-crons + !serial(false) + EOF + fi +} -- cgit v1.2.3