From feb0daf81d888e9160f9f94502de09b66f2a63fd Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Sun, 21 Jun 2020 17:50:24 +0100 Subject: gentoo resync : 21.06.2020 --- sys-firmware/intel-microcode/Manifest | 7 +- .../intel-microcode-20200609_p20200601.ebuild | 248 -------------------- .../intel-microcode-20200616_p20200617.ebuild | 259 +++++++++++++++++++++ 3 files changed, 263 insertions(+), 251 deletions(-) delete mode 100644 sys-firmware/intel-microcode/intel-microcode-20200609_p20200601.ebuild create mode 100644 sys-firmware/intel-microcode/intel-microcode-20200616_p20200617.ebuild (limited to 'sys-firmware/intel-microcode') diff --git a/sys-firmware/intel-microcode/Manifest b/sys-firmware/intel-microcode/Manifest index 8efa9c4e2327..20d431faafa5 100644 --- a/sys-firmware/intel-microcode/Manifest +++ b/sys-firmware/intel-microcode/Manifest @@ -1,4 +1,5 @@ -DIST intel-microcode-collection-20200601.tar.xz 6163976 BLAKE2B eb17605a09f771562189924b916b0d2426d6c2b6f9d76447d05d614679f097acf71fc70dd96132c0ad9d3f1a954f5809456fa951ca42fa0db2373da2288417b7 SHA512 60e798dd357ce85d8bd1f78e0447d983d6916aec87bf8a3f375091e4c57ffa8fb654459a8ed7d2d83184a828060509e16aa37e3a23f70684ac1b170736a12d54 -DIST microcode-20200609.tar.gz 3043809 BLAKE2B 08e69e8cf0c6932d6cb9909f18c1c55f359491ed29ad296c28111e6301c9f6371ec25c4ce1c8884a50900b9ba9dfcab38e77c7f3ebb58f3a3d8518ed839c8d22 SHA512 bfcaaea2811214b79445d632e256cd35af82d62f748799d47f7bc2490c5a6fd53f020bcaa3331a96b54c91ded1d17dfd9946b40174694b9a7ad17810f58293ae -EBUILD intel-microcode-20200609_p20200601.ebuild 8552 BLAKE2B 4fb7154e9de1cf7b5b92d1c089ba02efa959dfa2a0d23cd4e26ecb59e4945562fb27042b6ba4f23468113238e286ecea5810c15ad14f5ecaa02fc2ae18fd35d6 SHA512 dfda3995837d46dd2e71bf0bea6529b4f691e405a036de0548e75caf557797e974519d6a2d747210757f4a7dcb082572c091ff2d88a3e12f7d9c351a986e181e +DIST intel-microcode-collection-20200617.tar.xz 6097076 BLAKE2B cbd323fb98569c58c3d89f0f7ae3bb4b215c518d90a83086e19fba9f61cfc591908e24a3d8620f93fbd6b6aa418ceb4e8899684dab3bc9450d4af08314d7a243 SHA512 0e99a75c1632da1e80b6d888b313d280e97e2902b51a21d2551444a5b6a332f85e8a008f69553b7154c50e68f90bfe7f86e152e2babd7a2d0b839ff27d18f8c0 +DIST intel-ucode-sig_0x406e3-rev_0xd6.bin 101376 BLAKE2B 66d55867954d69dda1425febd93bb8c89f7aa836d504f8b5fee127f8505bcf2246f4fcc55cc245bc5e532528d60cca2eee278de7ab5174dc2862db7982a2b36f SHA512 248066b521bf512b5d8e4a8c7e921464ce52169c954d6e4ca580d8c172cd789519e22b4cf56c212e452b4191741f0202019f7061d322c9433b5af9ce5413b567 +DIST microcode-20200616.tar.gz 3036726 BLAKE2B c4db887743c916804624683b51306ba1fdb2281c3583a35706edfd5d6fbd7027793bf6fa952ba96dacd0e9b399a8e632d4997e46e13eba89d55f49328e0b5367 SHA512 39c4de3a292da0aeef4f35624d22ca6116dc8baa7f0683b1c16f5e153ba6d9d52f0879263313ef67922eda551d998521d3721af880c22c63083d8ebce81f413f +EBUILD intel-microcode-20200616_p20200617.ebuild 9108 BLAKE2B bdf8d295609270e2b509971d35bfbc34077b2f3deb86c75c96e049994b86da19ee4e759e4b65eb91f1589439fdbf1142025684028383f6d58e1981a88f548774 SHA512 36103e6a75d21d4a98e0099d8214f65db5ac216f1f696cf65fae9b88e92dfe49947e74a2a342f951b4703743c4fbdf036ac6f809ada661089fce90bf2a3b54db MISC metadata.xml 667 BLAKE2B f229775df839b3ddf34fcc289803ae113ad4b0ce293e036c24f3025bbd146d51c6e3ac55b4a7eb9b2ff0b6829aa020179ea4603f5e481de1c822a1deb66fd594 SHA512 a2d6bc54901a9eb12732e8fa0720c03b51ab615383f12a52019453b3a13f5c70233ee88a8d81706ce7e86eaec6d85155484cf32da288c3486d4b1a19647d2698 diff --git a/sys-firmware/intel-microcode/intel-microcode-20200609_p20200601.ebuild b/sys-firmware/intel-microcode/intel-microcode-20200609_p20200601.ebuild deleted file mode 100644 index 0a7fafc268df..000000000000 --- a/sys-firmware/intel-microcode/intel-microcode-20200609_p20200601.ebuild +++ /dev/null @@ -1,248 +0,0 @@ -# Copyright 1999-2020 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI="7" - -inherit linux-info toolchain-funcs mount-boot - -# Find updates by searching and clicking the first link (hopefully it's the one): -# https://www.intel.com/content/www/us/en/search.html?keyword=Processor+Microcode+Data+File - -COLLECTION_SNAPSHOT="${PV##*_p}" -INTEL_SNAPSHOT="${PV/_p*}" -#NUM="28087" -#https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=${NUM} -#https://downloadmirror.intel.com/${NUM}/eng/microcode-${INTEL_SNAPSHOT}.tgz -DESCRIPTION="Intel IA32/IA64 microcode update data" -HOMEPAGE="https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files http://inertiawar.com/microcode/" -SRC_URI="https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/archive/microcode-${INTEL_SNAPSHOT}.tar.gz - https://dev.gentoo.org/~whissi/dist/intel-microcode/intel-microcode-collection-${COLLECTION_SNAPSHOT}.tar.xz" - -LICENSE="intel-ucode" -SLOT="0" -KEYWORDS="-* amd64 x86" -IUSE="hostonly initramfs +split-ucode vanilla" -REQUIRED_USE="|| ( initramfs split-ucode )" - -BDEPEND="sys-apps/iucode_tool" - -# !/dev/null; then - # new tarball format from GitHub - mv * ../ || die "Failed to move Intel-Linux-Processor-Microcode-Data*" - cd .. || die - rm -r Intel-Linux-Processor-Microcode-Data* || die - fi - - # Prevent "invalid file format" errors from iucode_tool - rm -f "${S}"/intel-ucod*/list || die -} - -src_install() { - # This will take ALL of the upstream microcode sources: - # - microcode.dat - # - intel-ucode/ - # In some cases, they have not contained the same content (eg the directory has newer stuff). - MICROCODE_SRC=( - "${S}"/intel-ucode/ - "${S}"/intel-ucode-with-caveats/ - ) - - # Allow users who are scared about microcode updates not included in Intel's official - # microcode tarball to opt-out and comply with Intel marketing - if ! use vanilla; then - MICROCODE_SRC+=( "${S}"/intel-microcode-collection-${COLLECTION_SNAPSHOT} ) - fi - - # These will carry into pkg_preinst via env saving. - : ${MICROCODE_BLACKLIST=${MICROCODE_BLACKLIST_DEFAULT}} - : ${MICROCODE_SIGNATURES=${MICROCODE_SIGNATUES_DEFAULT}} - - opts=( - ${MICROCODE_BLACKLIST} - ${MICROCODE_SIGNATURES} - # be strict about what we are doing - --overwrite - --strict-checks - --no-ignore-broken - # we want to install latest version - --no-downgrade - # show everything we find - --list-all - # show what we selected - --list - ) - - # The earlyfw cpio needs to be in /boot because it must be loaded before - # rootfs is mounted. - use initramfs && dodir /boot && opts+=( --write-earlyfw="${ED}/boot/intel-uc.img" ) - - keepdir /lib/firmware/intel-ucode - opts+=( --write-firmware="${ED}/lib/firmware/intel-ucode" ) - - iucode_tool \ - "${opts[@]}" \ - "${MICROCODE_SRC[@]}" \ - || die "iucode_tool ${opts[@]} ${MICROCODE_SRC[@]}" - - dodoc releasenote -} - -pkg_preinst() { - if [[ ${MICROCODE_BLACKLIST} != ${MICROCODE_BLACKLIST_DEFAULT} ]]; then - ewarn "MICROCODE_BLACKLIST is set to \"${MICROCODE_BLACKLIST}\" instead of default \"${MICROCODE_BLACKLIST_DEFAULT}\". You are on your own!" - fi - - if [[ ${MICROCODE_SIGNATURES} != ${MICROCODE_SIGNATURES_DEFAULT} ]]; then - ewarn "Package was created using advanced options:" - ewarn "MICROCODE_SIGNATURES is set to \"${MICROCODE_SIGNATURES}\" instead of default \"${MICROCODE_SIGNATURES_DEFAULT}\"!" - fi - - # Make sure /boot is available if needed. - use initramfs && mount-boot_pkg_preinst - - local _initramfs_file="${ED}/boot/intel-uc.img" - - if use hostonly; then - # While this output looks redundant we do this check to detect - # rare cases where iucode_tool was unable to detect system's processor(s). - local _detected_processors=$(iucode_tool --scan-system 2>&1) - if [[ -z "${_detected_processors}" ]]; then - ewarn "Looks like iucode_tool was unable to detect any processor!" - else - einfo "Only installing ucode(s) for ${_detected_processors#iucode_tool: system has } due to USE=hostonly ..." - fi - - opts=( - --scan-system - # be strict about what we are doing - --overwrite - --strict-checks - --no-ignore-broken - # we want to install latest version - --no-downgrade - # show everything we find - --list-all - # show what we selected - --list - ) - - # The earlyfw cpio needs to be in /boot because it must be loaded before - # rootfs is mounted. - use initramfs && opts+=( --write-earlyfw=${_initramfs_file} ) - - if use split-ucode; then - opts+=( --write-firmware="${ED}/lib/firmware/intel-ucode" ) - fi - - opts+=( "${ED}/lib/firmware/intel-ucode-temp" ) - - mv "${ED}"/lib/firmware/intel-ucode{,-temp} || die - keepdir /lib/firmware/intel-ucode - - iucode_tool "${opts[@]}" || die "iucode_tool ${opts[@]}" - - rm -r "${ED}"/lib/firmware/intel-ucode-temp || die - - elif ! use split-ucode; then # hostonly disabled - rm -r "${ED}"/lib/firmware/intel-ucode || die - fi - - # Because it is possible that this package will install not one single file - # due to user selection which is still somehow unexpected we add the following - # check to inform user so that the user has at least a chance to detect - # a problem/invalid select. - local _has_installed_something= - if use initramfs && [[ -s "${_initramfs_file}" ]]; then - _has_installed_something="yes" - elif use split-ucode; then - _has_installed_something=$(find "${ED}/lib/firmware/intel-ucode" -maxdepth 0 -not -empty -exec echo yes \;) - fi - - if use hostonly && [[ -n "${_has_installed_something}" ]]; then - elog "You only installed ucode(s) for all currently available (=online)" - elog "processor(s). Remember to re-emerge this package whenever you" - elog "change the system's processor model." - elog "" - elif [[ -z "${_has_installed_something}" ]]; then - ewarn "WARNING:" - if [[ ${MICROCODE_SIGNATURES} != ${MICROCODE_SIGNATURES_DEFAULT} ]]; then - ewarn "No ucode was installed! Because you have created this package" - ewarn "using MICROCODE_SIGNATURES variable please double check if you" - ewarn "have an invalid select." - ewarn "It's rare but it is also possible that just no ucode update" - ewarn "is available for your processor(s). In this case it is safe" - ewarn "to ignore this warning." - else - ewarn "No ucode was installed! It's rare but it is also possible" - ewarn "that just no ucode update is available for your processor(s)." - ewarn "In this case it is safe to ignore this warning." - fi - - ewarn "" - - if use hostonly; then - ewarn "Unset \"hostonly\" USE flag to install all available ucodes." - ewarn "" - fi - fi -} - -pkg_prerm() { - # Make sure /boot is mounted so that we can remove /boot/intel-uc.img! - use initramfs && mount-boot_pkg_prerm -} - -pkg_postrm() { - # Don't forget to umount /boot if it was previously mounted by us. - use initramfs && mount-boot_pkg_postrm -} - -pkg_postinst() { - # Don't forget to umount /boot if it was previously mounted by us. - use initramfs && mount-boot_pkg_postinst - - # We cannot give detailed information if user is affected or not: - # If MICROCODE_BLACKLIST wasn't modified, user can still use MICROCODE_SIGNATURES - # to to force a specific, otherwise blacklisted, microcode. So we - # only show a generic warning based on running kernel version: - if kernel_is -lt 4 14 34; then - ewarn "${P} contains microcode updates which require" - ewarn "additional kernel patches which aren't yet included in kernel <4.14.34." - ewarn "Loading such a microcode through kernel interface from an unpatched kernel" - ewarn "can crash your system!" - ewarn "" - ewarn "Those microcodes are blacklisted per default. However, if you have altered" - ewarn "MICROCODE_BLACKLIST or MICROCODE_SIGNATURES, you maybe have unintentionally" - ewarn "re-enabled those microcodes...!" - ewarn "" - ewarn "Check \"${EROOT}/usr/share/doc/${PN}-*/releasenot*\" if your microcode update" - ewarn "requires additional kernel patches or not." - fi -} diff --git a/sys-firmware/intel-microcode/intel-microcode-20200616_p20200617.ebuild b/sys-firmware/intel-microcode/intel-microcode-20200616_p20200617.ebuild new file mode 100644 index 000000000000..8beb82b50b74 --- /dev/null +++ b/sys-firmware/intel-microcode/intel-microcode-20200616_p20200617.ebuild @@ -0,0 +1,259 @@ +# Copyright 1999-2020 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI="7" + +inherit linux-info toolchain-funcs mount-boot + +# Find updates by searching and clicking the first link (hopefully it's the one): +# https://www.intel.com/content/www/us/en/search.html?keyword=Processor+Microcode+Data+File + +COLLECTION_SNAPSHOT="${PV##*_p}" +INTEL_SNAPSHOT="${PV/_p*}" +#NUM="28087" +#https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=${NUM} +#https://downloadmirror.intel.com/${NUM}/eng/microcode-${INTEL_SNAPSHOT}.tgz +DESCRIPTION="Intel IA32/IA64 microcode update data" +HOMEPAGE="https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files http://inertiawar.com/microcode/" +SRC_URI="https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/archive/microcode-${INTEL_SNAPSHOT}.tar.gz + https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/raw/437f382b1be4412b9d03e2bbdcda46d83d581242/intel-ucode/06-4e-03 -> intel-ucode-sig_0x406e3-rev_0xd6.bin + https://dev.gentoo.org/~whissi/dist/intel-microcode/intel-microcode-collection-${COLLECTION_SNAPSHOT}.tar.xz" + +LICENSE="intel-ucode" +SLOT="0" +KEYWORDS="-* amd64 x86" +IUSE="hostonly initramfs +split-ucode vanilla" +REQUIRED_USE="|| ( initramfs split-ucode )" + +BDEPEND="sys-apps/iucode_tool" + +# !/dev/null; then + # new tarball format from GitHub + mv * ../ || die "Failed to move Intel-Linux-Processor-Microcode-Data*" + cd .. || die + rm -r Intel-Linux-Processor-Microcode-Data* || die + fi + + mkdir intel-ucode-old || die + cp "${DISTDIR}"/intel-ucode-sig_0x406e3-rev_0xd6.bin "${S}"/intel-ucode-old/ || die + + # Prevent "invalid file format" errors from iucode_tool + rm -f "${S}"/intel-ucod*/list || die +} + +src_install() { + # This will take ALL of the upstream microcode sources: + # - microcode.dat + # - intel-ucode/ + # In some cases, they have not contained the same content (eg the directory has newer stuff). + MICROCODE_SRC=( + "${S}"/intel-ucode/ + "${S}"/intel-ucode-with-caveats/ + "${S}"/intel-ucode-old/ + ) + + # Allow users who are scared about microcode updates not included in Intel's official + # microcode tarball to opt-out and comply with Intel marketing + if ! use vanilla; then + MICROCODE_SRC+=( "${S}"/intel-microcode-collection-${COLLECTION_SNAPSHOT} ) + fi + + # These will carry into pkg_preinst via env saving. + : ${MICROCODE_BLACKLIST=${MICROCODE_BLACKLIST_DEFAULT}} + : ${MICROCODE_SIGNATURES=${MICROCODE_SIGNATUES_DEFAULT}} + + opts=( + ${MICROCODE_BLACKLIST} + ${MICROCODE_SIGNATURES} + # be strict about what we are doing + --overwrite + --strict-checks + --no-ignore-broken + # we want to install latest version + --no-downgrade + # show everything we find + --list-all + # show what we selected + --list + ) + + # The earlyfw cpio needs to be in /boot because it must be loaded before + # rootfs is mounted. + use initramfs && dodir /boot && opts+=( --write-earlyfw="${ED}/boot/intel-uc.img" ) + + keepdir /lib/firmware/intel-ucode + opts+=( --write-firmware="${ED}/lib/firmware/intel-ucode" ) + + iucode_tool \ + "${opts[@]}" \ + "${MICROCODE_SRC[@]}" \ + || die "iucode_tool ${opts[@]} ${MICROCODE_SRC[@]}" + + dodoc releasenote +} + +pkg_preinst() { + if [[ ${MICROCODE_BLACKLIST} != ${MICROCODE_BLACKLIST_DEFAULT} ]]; then + ewarn "MICROCODE_BLACKLIST is set to \"${MICROCODE_BLACKLIST}\" instead of default \"${MICROCODE_BLACKLIST_DEFAULT}\". You are on your own!" + fi + + if [[ ${MICROCODE_SIGNATURES} != ${MICROCODE_SIGNATURES_DEFAULT} ]]; then + ewarn "Package was created using advanced options:" + ewarn "MICROCODE_SIGNATURES is set to \"${MICROCODE_SIGNATURES}\" instead of default \"${MICROCODE_SIGNATURES_DEFAULT}\"!" + fi + + # Make sure /boot is available if needed. + use initramfs && mount-boot_pkg_preinst + + local _initramfs_file="${ED}/boot/intel-uc.img" + + if use hostonly; then + # While this output looks redundant we do this check to detect + # rare cases where iucode_tool was unable to detect system's processor(s). + local _detected_processors=$(iucode_tool --scan-system 2>&1) + if [[ -z "${_detected_processors}" ]]; then + ewarn "Looks like iucode_tool was unable to detect any processor!" + else + einfo "Only installing ucode(s) for ${_detected_processors#iucode_tool: system has } due to USE=hostonly ..." + fi + + opts=( + --scan-system + # be strict about what we are doing + --overwrite + --strict-checks + --no-ignore-broken + # we want to install latest version + --no-downgrade + # show everything we find + --list-all + # show what we selected + --list + ) + + # The earlyfw cpio needs to be in /boot because it must be loaded before + # rootfs is mounted. + use initramfs && opts+=( --write-earlyfw=${_initramfs_file} ) + + if use split-ucode; then + opts+=( --write-firmware="${ED}/lib/firmware/intel-ucode" ) + fi + + opts+=( "${ED}/lib/firmware/intel-ucode-temp" ) + + mv "${ED}"/lib/firmware/intel-ucode{,-temp} || die + keepdir /lib/firmware/intel-ucode + + iucode_tool "${opts[@]}" || die "iucode_tool ${opts[@]}" + + rm -r "${ED}"/lib/firmware/intel-ucode-temp || die + + elif ! use split-ucode; then # hostonly disabled + rm -r "${ED}"/lib/firmware/intel-ucode || die + fi + + # Because it is possible that this package will install not one single file + # due to user selection which is still somehow unexpected we add the following + # check to inform user so that the user has at least a chance to detect + # a problem/invalid select. + local _has_installed_something= + if use initramfs && [[ -s "${_initramfs_file}" ]]; then + _has_installed_something="yes" + elif use split-ucode; then + _has_installed_something=$(find "${ED}/lib/firmware/intel-ucode" -maxdepth 0 -not -empty -exec echo yes \;) + fi + + if use hostonly && [[ -n "${_has_installed_something}" ]]; then + elog "You only installed ucode(s) for all currently available (=online)" + elog "processor(s). Remember to re-emerge this package whenever you" + elog "change the system's processor model." + elog "" + elif [[ -z "${_has_installed_something}" ]]; then + ewarn "WARNING:" + if [[ ${MICROCODE_SIGNATURES} != ${MICROCODE_SIGNATURES_DEFAULT} ]]; then + ewarn "No ucode was installed! Because you have created this package" + ewarn "using MICROCODE_SIGNATURES variable please double check if you" + ewarn "have an invalid select." + ewarn "It's rare but it is also possible that just no ucode update" + ewarn "is available for your processor(s). In this case it is safe" + ewarn "to ignore this warning." + else + ewarn "No ucode was installed! It's rare but it is also possible" + ewarn "that just no ucode update is available for your processor(s)." + ewarn "In this case it is safe to ignore this warning." + fi + + ewarn "" + + if use hostonly; then + ewarn "Unset \"hostonly\" USE flag to install all available ucodes." + ewarn "" + fi + fi +} + +pkg_prerm() { + # Make sure /boot is mounted so that we can remove /boot/intel-uc.img! + use initramfs && mount-boot_pkg_prerm +} + +pkg_postrm() { + # Don't forget to umount /boot if it was previously mounted by us. + use initramfs && mount-boot_pkg_postrm +} + +pkg_postinst() { + # Don't forget to umount /boot if it was previously mounted by us. + use initramfs && mount-boot_pkg_postinst + + # We cannot give detailed information if user is affected or not: + # If MICROCODE_BLACKLIST wasn't modified, user can still use MICROCODE_SIGNATURES + # to to force a specific, otherwise blacklisted, microcode. So we + # only show a generic warning based on running kernel version: + if kernel_is -lt 4 14 34; then + ewarn "${P} contains microcode updates which require" + ewarn "additional kernel patches which aren't yet included in kernel <4.14.34." + ewarn "Loading such a microcode through kernel interface from an unpatched kernel" + ewarn "can crash your system!" + ewarn "" + ewarn "Those microcodes are blacklisted per default. However, if you have altered" + ewarn "MICROCODE_BLACKLIST or MICROCODE_SIGNATURES, you maybe have unintentionally" + ewarn "re-enabled those microcodes...!" + ewarn "" + ewarn "Check \"${EROOT}/usr/share/doc/${PN}-*/releasenot*\" if your microcode update" + ewarn "requires additional kernel patches or not." + fi +} -- cgit v1.2.3