From d99093fb4bb5652015c06274d64083daa2439e4f Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Wed, 3 Mar 2021 10:28:17 +0000 Subject: gentoo resync : 03.03.2021 --- sci-libs/linux-gpib/Manifest | 6 +- sci-libs/linux-gpib/linux-gpib-4.3.0.ebuild | 178 ---------------------------- sci-libs/linux-gpib/linux-gpib-4.3.2.ebuild | 178 ---------------------------- sci-libs/linux-gpib/linux-gpib-4.3.3.ebuild | 4 +- 4 files changed, 3 insertions(+), 363 deletions(-) delete mode 100644 sci-libs/linux-gpib/linux-gpib-4.3.0.ebuild delete mode 100644 sci-libs/linux-gpib/linux-gpib-4.3.2.ebuild (limited to 'sci-libs/linux-gpib') diff --git a/sci-libs/linux-gpib/Manifest b/sci-libs/linux-gpib/Manifest index 38959c6acf2f..3e453617b30c 100644 --- a/sci-libs/linux-gpib/Manifest +++ b/sci-libs/linux-gpib/Manifest @@ -1,11 +1,7 @@ AUX linux-gpib-4.3.0-perl.patch 546 BLAKE2B 9695c1a9f48a2a8bcb5f5998c40eb909e6b1b3624defe87a08bc4b91b34f53e8176531678dff3d4810b0b85b811eb477795c0dffe0275b864c0e4d4bac9b0ea9 SHA512 21bf64366d4b68dcfc2f4fa932480f8ff6af62bf792fe90c0dd0330606c3b95c073040dfa87bd1e277391a02ad324612d58b6d618d83c637b3df60c638289d06 DIST gpib_firmware-2006-11-12.tar.gz 169357 BLAKE2B 05f1be78545e025d76e2b9819a5dcac5a6715dfbb6df5c6fbe8b78900adf8ca7b1c28db350674ff1dd9c77e24507e98b536ca1af8b558c9a46ef8c25034c9769 SHA512 164d6fcfb3af43933f0a16645276f7d527a7aa24ef311f6ae3dcd7f45c41f92c855cf221bc946772f43fc2f9524057abc34bbd7d805c89b33ed7e111bc6870af -DIST linux-gpib-4.3.0.tar.gz 1375852 BLAKE2B e2daa444ddf4c0c34084f264247051d4ce1c8103d8ae5d91b02d4742131c1f92ded02775eb0f8b0ea29820e2ae7b61c3132c74084a876e86fbb4efaf11688773 SHA512 8db4eb6d606c68ffacc67988479684fec815fc552756a6c93466ef0dfc93368771bb551944e3afc31db83e72e464ec1fb289fdcf80b4a6be1617e734fe3b9d65 -DIST linux-gpib-4.3.2.tar.gz 1377406 BLAKE2B 57ec8b3788606ffb42d204ad0e2476c432bc82f929b1854c6a1d48c73f48a149716d05b13906b4597a4bf03e4c10a0ffe2c66e6de8cf9a5891b86c3d459713fc SHA512 bf9963d885e0c974f41eed96359501bd41c7d4f051026f64d835e52f1031f39e6bba6ce976a27e660a8b36087e56b81205206066c68b42db9a1d578d351a8f8b DIST linux-gpib-4.3.3.tar.gz 1381420 BLAKE2B 0ee8c4d740272a55be03f07bd49c9a93d0ec4808465c9b0abc4ede2ee9ef4bcb8a48fb8c98617d007c8b7af970eae185de65094a8814b05cb81bfc983bf9df3e SHA512 91b2c345dc82778b757122dc41ae74138831223a73057ddf9f04d10b8f6a059760e17134378df46a1ecb13c42bec1383aced0f2446f803af425391193a77066e DIST linux-gpib-4.3.4.tar.gz 1395770 BLAKE2B 3c7182ac127851ebf0f5416ea639d7f858c160ba00f01aa7f7e423f6fb7b3be5b089424d3a473497562d040c194483ebc93d8a2a0f64582fb8907b42e2c4b832 SHA512 397ad86883bf562b004673ae47218108d392f2a15121c95926ea38764e7a76b382cb199fd48c35c9777f34c8eb99965e3d4ea2028e86ce02bcda4bd23127cbd5 -EBUILD linux-gpib-4.3.0.ebuild 4791 BLAKE2B 8e0d7ea05b242b60a6c60798cf60ab75b2e5915782ab0f8d269fcbd74e353fbbc358ca3bc0c42a4fe51e4fb6965e618a2caf74849ebf00ab769e075001f7c502 SHA512 aa12ce276ffc241ef5c60659ea52b15a3b2186b3869e17ac74ac9e30ebd2b38bb59d62920e2c4381c1d90783b8f9d187f2d0eb1237f70a74fff391201febfdfe -EBUILD linux-gpib-4.3.2.ebuild 4792 BLAKE2B 1c733c05bd35cab2576b903f0fc0327fc8b28ecd774600b918b209e58288fdab14a5e915531d1de7f87e660c6957463d9c8823a0ef170be0992138fa370b5502 SHA512 37829bf5264ed12bbc98d721d80728632b91e00334f6e69711824810725a007f73f52174cb8e8c4d14d255f3e58d249fef638186c75b603ba3018290a72b0e3a -EBUILD linux-gpib-4.3.3.ebuild 4792 BLAKE2B 1c733c05bd35cab2576b903f0fc0327fc8b28ecd774600b918b209e58288fdab14a5e915531d1de7f87e660c6957463d9c8823a0ef170be0992138fa370b5502 SHA512 37829bf5264ed12bbc98d721d80728632b91e00334f6e69711824810725a007f73f52174cb8e8c4d14d255f3e58d249fef638186c75b603ba3018290a72b0e3a +EBUILD linux-gpib-4.3.3.ebuild 4791 BLAKE2B 6cfd15ace01acb85c7e79fd8b743e2ed21ded765e12ddcb0be99ec6502d8e1203bd9b26155185ed3c4392bd4549f9ac0b547ed65f1e600785e0117fb0ac40c22 SHA512 ed878490eca99e6a248eeef1d0634e8a575995066d1f501f093ff5a9c8052517a1b99e4f378699b83d1a34c0646d80d7b023f8dd707c03d5d223dd36530e3e9e EBUILD linux-gpib-4.3.4.ebuild 4798 BLAKE2B 98352a097c293f77d0dd897294a45d6a5b24097aa96884b0aa4377d543ae0d5463cd0988d02a3285b3b1aa065e888be69145d34256beb176020cffc6d75f2f74 SHA512 c48021a17547e256e25fda080c03d0fa31948d746a5bc27c9d888a35b40d09285187a25cc8868a2660b72eb1011f66dd73bc9bc7010c0a1375eb6930de46c66f MISC metadata.xml 547 BLAKE2B 1d0da80dd999dc402dbcdc80628e1fe97ec648b806cbd17cf20f6cbc33279afad81f71728e944a600108f28f90a61111e6bd9c36c7908a557d6cca6e41cdc759 SHA512 a88766b0372a88d090c032b45a973cf087a2172b088396fd1706a7c3818d6bf220de26848cb844d2ed555e3067bda6a00ffff598e0a0a59009ce33b3230b68a1 diff --git a/sci-libs/linux-gpib/linux-gpib-4.3.0.ebuild b/sci-libs/linux-gpib/linux-gpib-4.3.0.ebuild deleted file mode 100644 index 9f44a9c23e67..000000000000 --- a/sci-libs/linux-gpib/linux-gpib-4.3.0.ebuild +++ /dev/null @@ -1,178 +0,0 @@ -# Copyright 1999-2020 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI=6 - -PYTHON_COMPAT=( python3_7 ) - -inherit readme.gentoo-r1 autotools perl-functions python-single-r1 toolchain-funcs udev - -DESCRIPTION="Driver library for GPIB (IEEE 488.2) hardware" -HOMEPAGE="https://linux-gpib.sourceforge.io/" -SRC_URI="mirror://sourceforge/linux-gpib/${P}.tar.gz - firmware? ( https://linux-gpib.sourceforge.io/firmware/gpib_firmware-2006-11-12.tar.gz ) -" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="amd64 ~arm ~x86" -IUSE="pcmcia static guile perl php python tcl doc firmware" - -S="${WORKDIR}/${PN}-user-${PV}" - -COMMONDEPEND=" - sys-libs/readline:= - tcl? ( dev-lang/tcl:0= ) - guile? ( dev-scheme/guile:12 ) - perl? ( dev-lang/perl:= ) - php? ( dev-lang/php:= ) - python? ( ${PYTHON_DEPS} ) - firmware? ( sys-apps/fxload )" -RDEPEND="${COMMONDEPEND} - acct-group/gpib - ~sci-libs/linux-gpib-modules-${PV} -" -DEPEND="${COMMONDEPEND} - virtual/pkgconfig - doc? ( app-text/docbook-sgml-utils ) - perl? ( virtual/perl-ExtUtils-MakeMaker )" - -REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )" - -PATCHES=( - "${FILESDIR}"/${PN}-4.3.0-perl.patch -) - -pkg_setup() { - use perl && perl_set_version - use python && python_setup -} - -src_unpack() { - default - unpack "${WORKDIR}/${P}/${PN}-user-${PV}.tar.gz" -} - -src_prepare() { - default - eautoreconf -} - -src_configure() { - econf \ - $(use_enable static) \ - $(use_enable guile guile-binding) \ - $(use_enable perl perl-binding) \ - $(use_enable php php-binding) \ - $(use_enable python python-binding) \ - $(use_enable tcl tcl-binding) \ - $(use_enable doc documentation) -} - -src_compile() { - FIRM_DIR=/usr/share/usb - emake \ - DESTDIR="${D}" \ - INSTALL_MOD_PATH="${D}" \ - HOTPLUG_USB_CONF_DIR=/etc/hotplug/usb \ - UDEV_RULES_DIR="$(get_udevdir)"/rules.d \ - USB_FIRMWARE_DIR=${FIRM_DIR} \ - docdir=/usr/share/doc/${PF}/html -} - -src_install() { - FIRM_DIR=/usr/share/usb - emake \ - DESTDIR="${D}" \ - INSTALL_MOD_PATH="${D}" \ - HOTPLUG_USB_CONF_DIR=/etc/hotplug/usb \ - UDEV_RULES_DIR="$(get_udevdir)"/rules.d \ - USB_FIRMWARE_DIR=${FIRM_DIR} \ - docdir=/usr/share/doc/${PF}/html install - - if use perl; then - einfo "Installing perl module" - cd "${S}"/language/perl || die - DESTDIR=${D} emake install - perl_fix_packlist - perl_delete_emptybsdir - cd "${S}" || die - fi - - echo "KERNEL==\"gpib[0-9]*\", MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules - udev_dorules 99-gpib.rules - - dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS - - insinto /etc - newins util/templates/gpib.conf gpib.conf - newins util/templates/gpib.conf gpib.conf.example - - if use pcmcia; then - insinto /etc/pcmcia - doins "${S}"/etc/pcmcia/* - fi - - # fix rules files - local f - find "${D}$(get_udevdir)"/rules.d -type f -print0 | while read -rd '' f ; do - grep -q "${D}" "${f}" && einfo "File ${f} contains a temporary path, fixing." - sed -i -e "s:${D}:/:g" "${f}" - done - - DOC_CONTENTS=" -As the udev rules were changed and refactored in this release it is -necessary to remove any manually installed pre-4.3.0 gpib udev rules files -in /etc/udev/rules.d/. The files to remove are: -\n - 99-agilent_82357a.rules\n - 99-gpib-generic.rules\n - 99-ni_usb_gpib.rules\n -\n -You need to run the 'gpib_config' utility to setup the driver before -you can use it. In order to do it automatically you can add to your -start script something like this (supposing the appropriate driver -is loaded on the startup): -\n - gpib_config --minor 0 -\n -To give a user access to the computer's gpib board you will have to add -them to the group 'gpib' or, you could change the permissions on the device -files /dev/gpib[0-15] to something you like better, using 'chmod' -\n -Edit /etc/gpib.conf to match your interface board, and any devices you wish -to open via ibfind(). See the documentation in /usr/share/linux-gpib/html for -more information. -\n -" - - if use pcmcia; then - DOC_CONTENTS+=' -For PCMCIA cards:\n -All files needed for a PCMCIA board were copied to /etc/pcmcia. -You may wish to edit the options passed to the gpib_config call in the -/etc/pcmcia/linux-gpib-pcmcia script. -You may need to send a SIGHUP signal to the cardmgr daemon to force it -to reload the files in /etc/pcmcia \(alternatively you could use your -pcmcia init.d script to restart the cardmgr, or you could just reboot\). -The driver module will be loaded as needed by the cardmgr. - -' - fi - - if use firmware; then - DOC_CONTENTS+=' -For Agilent \(HP\) 82341C and 82341D cards: -The firmware for these boards is uploaded by passing the appropriate -firmware file from /usr/share/linux-gpib/hp_82341 directory to -gpib_config using the -I or --init-data command line option. Example:\n -gpib_config --minor 0 --init-data /usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin -' - fi - - readme.gentoo_create_doc -} - -pkg_postinst() { - readme.gentoo_print_elog -} diff --git a/sci-libs/linux-gpib/linux-gpib-4.3.2.ebuild b/sci-libs/linux-gpib/linux-gpib-4.3.2.ebuild deleted file mode 100644 index 73b3efa1d020..000000000000 --- a/sci-libs/linux-gpib/linux-gpib-4.3.2.ebuild +++ /dev/null @@ -1,178 +0,0 @@ -# Copyright 1999-2020 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI=6 - -PYTHON_COMPAT=( python3_7 ) - -inherit readme.gentoo-r1 autotools perl-functions python-single-r1 toolchain-funcs udev - -DESCRIPTION="Driver library for GPIB (IEEE 488.2) hardware" -HOMEPAGE="https://linux-gpib.sourceforge.io/" -SRC_URI="mirror://sourceforge/linux-gpib/${P}.tar.gz - firmware? ( https://linux-gpib.sourceforge.io/firmware/gpib_firmware-2006-11-12.tar.gz ) -" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="~amd64 ~arm ~x86" -IUSE="pcmcia static guile perl php python tcl doc firmware" - -S="${WORKDIR}/${PN}-user-${PV}" - -COMMONDEPEND=" - sys-libs/readline:= - tcl? ( dev-lang/tcl:0= ) - guile? ( dev-scheme/guile:12 ) - perl? ( dev-lang/perl:= ) - php? ( dev-lang/php:= ) - python? ( ${PYTHON_DEPS} ) - firmware? ( sys-apps/fxload )" -RDEPEND="${COMMONDEPEND} - acct-group/gpib - ~sci-libs/linux-gpib-modules-${PV} -" -DEPEND="${COMMONDEPEND} - virtual/pkgconfig - doc? ( app-text/docbook-sgml-utils ) - perl? ( virtual/perl-ExtUtils-MakeMaker )" - -REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )" - -PATCHES=( - "${FILESDIR}"/${PN}-4.3.0-perl.patch -) - -pkg_setup() { - use perl && perl_set_version - use python && python_setup -} - -src_unpack() { - default - unpack "${WORKDIR}/${P}/${PN}-user-${PV}.tar.gz" -} - -src_prepare() { - default - eautoreconf -} - -src_configure() { - econf \ - $(use_enable static) \ - $(use_enable guile guile-binding) \ - $(use_enable perl perl-binding) \ - $(use_enable php php-binding) \ - $(use_enable python python-binding) \ - $(use_enable tcl tcl-binding) \ - $(use_enable doc documentation) -} - -src_compile() { - FIRM_DIR=/usr/share/usb - emake \ - DESTDIR="${D}" \ - INSTALL_MOD_PATH="${D}" \ - HOTPLUG_USB_CONF_DIR=/etc/hotplug/usb \ - UDEV_RULES_DIR="$(get_udevdir)"/rules.d \ - USB_FIRMWARE_DIR=${FIRM_DIR} \ - docdir=/usr/share/doc/${PF}/html -} - -src_install() { - FIRM_DIR=/usr/share/usb - emake \ - DESTDIR="${D}" \ - INSTALL_MOD_PATH="${D}" \ - HOTPLUG_USB_CONF_DIR=/etc/hotplug/usb \ - UDEV_RULES_DIR="$(get_udevdir)"/rules.d \ - USB_FIRMWARE_DIR=${FIRM_DIR} \ - docdir=/usr/share/doc/${PF}/html install - - if use perl; then - einfo "Installing perl module" - cd "${S}"/language/perl || die - DESTDIR=${D} emake install - perl_fix_packlist - perl_delete_emptybsdir - cd "${S}" || die - fi - - echo "KERNEL==\"gpib[0-9]*\", MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules - udev_dorules 99-gpib.rules - - dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS - - insinto /etc - newins util/templates/gpib.conf gpib.conf - newins util/templates/gpib.conf gpib.conf.example - - if use pcmcia; then - insinto /etc/pcmcia - doins "${S}"/etc/pcmcia/* - fi - - # fix rules files - local f - find "${D}$(get_udevdir)"/rules.d -type f -print0 | while read -rd '' f ; do - grep -q "${D}" "${f}" && einfo "File ${f} contains a temporary path, fixing." - sed -i -e "s:${D}:/:g" "${f}" - done - - DOC_CONTENTS=" -As the udev rules were changed and refactored in this release it is -necessary to remove any manually installed pre-4.3.0 gpib udev rules files -in /etc/udev/rules.d/. The files to remove are: -\n - 99-agilent_82357a.rules\n - 99-gpib-generic.rules\n - 99-ni_usb_gpib.rules\n -\n -You need to run the 'gpib_config' utility to setup the driver before -you can use it. In order to do it automatically you can add to your -start script something like this (supposing the appropriate driver -is loaded on the startup): -\n - gpib_config --minor 0 -\n -To give a user access to the computer's gpib board you will have to add -them to the group 'gpib' or, you could change the permissions on the device -files /dev/gpib[0-15] to something you like better, using 'chmod' -\n -Edit /etc/gpib.conf to match your interface board, and any devices you wish -to open via ibfind(). See the documentation in /usr/share/linux-gpib/html for -more information. -\n -" - - if use pcmcia; then - DOC_CONTENTS+=' -For PCMCIA cards:\n -All files needed for a PCMCIA board were copied to /etc/pcmcia. -You may wish to edit the options passed to the gpib_config call in the -/etc/pcmcia/linux-gpib-pcmcia script. -You may need to send a SIGHUP signal to the cardmgr daemon to force it -to reload the files in /etc/pcmcia \(alternatively you could use your -pcmcia init.d script to restart the cardmgr, or you could just reboot\). -The driver module will be loaded as needed by the cardmgr. - -' - fi - - if use firmware; then - DOC_CONTENTS+=' -For Agilent \(HP\) 82341C and 82341D cards: -The firmware for these boards is uploaded by passing the appropriate -firmware file from /usr/share/linux-gpib/hp_82341 directory to -gpib_config using the -I or --init-data command line option. Example:\n -gpib_config --minor 0 --init-data /usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin -' - fi - - readme.gentoo_create_doc -} - -pkg_postinst() { - readme.gentoo_print_elog -} diff --git a/sci-libs/linux-gpib/linux-gpib-4.3.3.ebuild b/sci-libs/linux-gpib/linux-gpib-4.3.3.ebuild index 73b3efa1d020..eeecbc6b2319 100644 --- a/sci-libs/linux-gpib/linux-gpib-4.3.3.ebuild +++ b/sci-libs/linux-gpib/linux-gpib-4.3.3.ebuild @@ -1,4 +1,4 @@ -# Copyright 1999-2020 Gentoo Authors +# Copyright 1999-2021 Gentoo Authors # Distributed under the terms of the GNU General Public License v2 EAPI=6 @@ -15,7 +15,7 @@ SRC_URI="mirror://sourceforge/linux-gpib/${P}.tar.gz LICENSE="GPL-2" SLOT="0" -KEYWORDS="~amd64 ~arm ~x86" +KEYWORDS="amd64 ~arm ~x86" IUSE="pcmcia static guile perl php python tcl doc firmware" S="${WORKDIR}/${PN}-user-${PV}" -- cgit v1.2.3