From 8b2628ad8526c806375e7b157889e4274b70248b Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Sat, 21 Oct 2017 21:00:58 +0100 Subject: gentoo resync : 21.10.2017 --- sci-libs/linux-gpib/Manifest | 6 +- sci-libs/linux-gpib/linux-gpib-4.0.3-r1.ebuild | 216 ------------------------ sci-libs/linux-gpib/linux-gpib-4.0.4_rc3.ebuild | 215 ----------------------- sci-libs/linux-gpib/linux-gpib-4.1.0.ebuild | 2 +- 4 files changed, 2 insertions(+), 437 deletions(-) delete mode 100644 sci-libs/linux-gpib/linux-gpib-4.0.3-r1.ebuild delete mode 100644 sci-libs/linux-gpib/linux-gpib-4.0.4_rc3.ebuild (limited to 'sci-libs/linux-gpib') diff --git a/sci-libs/linux-gpib/Manifest b/sci-libs/linux-gpib/Manifest index 2d09a7ad0ed1..149c8c83a26c 100644 --- a/sci-libs/linux-gpib/Manifest +++ b/sci-libs/linux-gpib/Manifest @@ -3,12 +3,8 @@ AUX linux-gpib-3.2.21-build.patch 1676 SHA256 f0f2aadc12a7180dc1237f1e991d4a7d0b AUX linux-gpib-4.0.3-reallydie.patch 621 SHA256 bb6ee69d9c5b059b95d710c387024642dd3d2db6ac6e50ccfd76bb2275269bbb SHA512 919229d276d5fddaa28c4ae7f9c8871966839cfb37be50903e92f43a5781345acfe512e6f07e90a55197cbf3fffb866695b308546a3fae88f480df9cf2e994a6 WHIRLPOOL 249ef2ea1a41f7ab54b1c33dc72fc897d1c10a053fa670e160e3bf4e70015d6c8d517df6b5ce241c3570f2b36dc824477faeb30c75dfe29552b1b80d5dd4611c AUX linux-gpib-4.0.4_rc2-kernel-4.11.0.patch 387 SHA256 c4d00183327826ab1c07f0350399bf9b8f04fc144764b8a113803313191c62c2 SHA512 6f6b25695ae81671a93e8b86978ea1ef9e71ba5a38d14ad95b9a6aa59704bb2d6a8064c1ac006b1e7c4740d059184d4d4cefef88a2fd0c2a09406f64f6597187 WHIRLPOOL ce48b5c6ea8db9b13c379c32cfb0e0d809bf0105b90b8b5090f0d902647a3cb7b990411cf999c567582318164e4f5dacbaa13ed82b40d68112b2c49750b1d720 DIST gpib_firmware-2006-11-12.tar.gz 169357 SHA256 98380a8d12e6e34dccc0c1d82b48ed796c0c0f5571107d6a685524560aa8d701 SHA512 164d6fcfb3af43933f0a16645276f7d527a7aa24ef311f6ae3dcd7f45c41f92c855cf221bc946772f43fc2f9524057abc34bbd7d805c89b33ed7e111bc6870af WHIRLPOOL 44506c9d03e746f5bc88f9a2f20e07879a4c4c72f52a5dae97accb381f8ac7f5b5c0cf5c58d1045b18ed6cbda20549a1fdb7e5ab0151a1081da1ec798c683e67 -DIST linux-gpib-4.0.3.tar.gz 1311963 SHA256 6af5113978d179d2f281f5d779f235935371bdfbb15c6c7ca848bca5c3f17c4a SHA512 6eb65cae5220d3c7ca607eed5a641e8a68b422d0e76a787e767d3bffd0695672d5137d44a097483176e933ded5eb376ff57e3a61cddd62aceaa43192218c9cfe WHIRLPOOL f0df699fbdaa7d77abd114c8fef1b6ff3aacd67cc233a68f78b0db67b30baeab615beff89861ed47a70216e1fe0d73c518050f80c9d70d0c8199b2b159e068a1 -DIST linux-gpib-4.0.4rc3.tar.gz 1276866 SHA256 437c58fe9f1dc37a7dae7378821dcb7709b30de3701a92d3c67d63867f2ced3f SHA512 915db5c41b613706053b431aec5d0c3d1f309e8a949842f18ee011614fa126ee464c6d5d46744d10a4ae85a73bb7489280d25dddbf7724b0d5e32f65eae67829 WHIRLPOOL f492694b709aba1e06fc3d45c4c266e73230a4e494fb9ff64dec91ab25142b3a2c96546a4cc226718c236e57d4961cbdfa7ebb14d7867986de4ca05f91c6c9b3 DIST linux-gpib-4.1.0.tar.gz 1529480 SHA256 4cdd7f38e5b02aa6efe27745dae0e21084dbe3ff90b576fc0867be87a1791e26 SHA512 037ed9e484a83caccb15d2d142eef6f1eec356ae972480ca7a676a318d3e9f844fc1911c1b30869b4bb14ef0b4cd10587a803426df9145966bafe22ca7316bd8 WHIRLPOOL 598f66281577034c842d137015e03364a988f8e752901a0de87d26b3a9d50dc54cf73a4543880c846781e9613336794aeb0c28a7018b0046a45d358395fb94e9 -EBUILD linux-gpib-4.0.3-r1.ebuild 6155 SHA256 8a7ffb56a94caa0ac83ada0d12a23d0bb1b6055dcdafc853183c5627a8712c0e SHA512 ee62238b2be5a4be8175909b9741706ca2ae00f420100fdbe3352b9f56ea3a59bf9ee7db9f28a1eff00ad40fc04e4d8641f33689741b196e70db15ecb7e4cca5 WHIRLPOOL 14d3782f1de23e0a45dfc88eb503816ceec913d67ea5f4aff96529966bab404471e47765309a562aa04d2b974509ddfe2635dd3a696257d60f77dd5c0186d2d4 -EBUILD linux-gpib-4.0.4_rc3.ebuild 6128 SHA256 fc4490e0b5b5256d64aa829d0e26a22f6384a4af9673918118df15fb1577b5d4 SHA512 82b837565e9144470866fb2ccf9915dcfa5c5cdc5afd64f258416e3c212fc6d7c83a836a1ebba1511e8fae26cad3c45526e3060a2c077ee6414abaff676bec2c WHIRLPOOL ac1043ab2bcb073722ce418158a3b5181371e87dcf7a1f8e6e9d1b81622f1f907659be3840b116e2935b51bd8661219348fea370b5b44a13486fdbec8d25208a -EBUILD linux-gpib-4.1.0.ebuild 6128 SHA256 fc4490e0b5b5256d64aa829d0e26a22f6384a4af9673918118df15fb1577b5d4 SHA512 82b837565e9144470866fb2ccf9915dcfa5c5cdc5afd64f258416e3c212fc6d7c83a836a1ebba1511e8fae26cad3c45526e3060a2c077ee6414abaff676bec2c WHIRLPOOL ac1043ab2bcb073722ce418158a3b5181371e87dcf7a1f8e6e9d1b81622f1f907659be3840b116e2935b51bd8661219348fea370b5b44a13486fdbec8d25208a +EBUILD linux-gpib-4.1.0.ebuild 6127 SHA256 fef3399afbfca95ec81baed751642c44a5f1fc4a9244891a7caf5a284769c118 SHA512 a6df0070dd9ce9a98e291422b07c9ac3e9f146f43290a65cf44d239ae324877e891a90c25978251e2c0e79af04d85ac8fb8bbb0415004050f7289b8900969a7c WHIRLPOOL f2a8a3785701602c80887be4e469408179fe6daab991f1934e26490202e97c9bcb21ceb4d303567b41c0e5f609f493eb92e5d535e51168434dadbce3554bae64 MISC ChangeLog 3889 SHA256 633a5041c1732f93cd651918a1ebb1932396560448a5840e263afa399048554a SHA512 ca93c03abdfc2857f253330b1aca5c9601c1e88cb7c3c16a76a468662818e83c0b91377f43c16616c2aff1542ed95c79c407bd4ee253f17f8c36b2e58f6bbfb1 WHIRLPOOL 01ce4ad3112c71ba40ae76bfbbbe21b9bd616ceac0816f25b4521262d1f609f9e0d5e7ad3c7a86fdc6f989f9d1b5a8846b25b47a005aabeb7395cfbd59885110 MISC ChangeLog-2015 6862 SHA256 3eda2a217dd7265d8a2af46341d3f86dc5005925be1d5fe061b4efd635a7dc67 SHA512 d7f46b46e7d593bfe8305be676e9b17961715ba4390463d1b9563d18f9dd9936a7d33ec9f39cf73fa8b4793be5b4b117ad22e330031958a0eae2709e1b18cbce WHIRLPOOL ff17c56a2d6aae9de86a75d98f8f6d35557dd1eef478fa157e38ad61bfdf615ec8dce590200dac18e0517529013c934d030bc90eb9d5bde3ac36c457c0405fc3 MISC metadata.xml 688 SHA256 ef2d671cdf67ec75d794b09fcdbed7c8017cc394557938d4407da51c58659b48 SHA512 d5af868c802d6c01b8267038cc5bdffc61677403ecb88cdfaf97f31d6b80d1e9318bcd507199d6a850df221cda2baf2869a1de4d732cde75a4aea2ec54f944b8 WHIRLPOOL dc3581d03a2f9dd5598c8217c04086ea6512ee23a226bd4fb0cdf48d1bf2742e9a5cfb89f7af9f239e93f9ed85188a5c226e6b643a144117c1646df7e17c690f diff --git a/sci-libs/linux-gpib/linux-gpib-4.0.3-r1.ebuild b/sci-libs/linux-gpib/linux-gpib-4.0.3-r1.ebuild deleted file mode 100644 index 8e7b27438b4f..000000000000 --- a/sci-libs/linux-gpib/linux-gpib-4.0.3-r1.ebuild +++ /dev/null @@ -1,216 +0,0 @@ -# Copyright 1999-2017 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -EAPI=6 - -PYTHON_COMPAT=( python2_7 ) - -inherit linux-info readme.gentoo-r1 versionator eutils linux-mod autotools perl-functions python-single-r1 toolchain-funcs udev user - -MY_PV=${PV/_/} - -DESCRIPTION="Kernel module and driver library for GPIB (IEEE 488.2) hardware" -HOMEPAGE="http://linux-gpib.sourceforge.net/" -SRC_URI="mirror://sourceforge/linux-gpib/${PN}-${MY_PV}.tar.gz - firmware? ( http://linux-gpib.sourceforge.net/firmware/gpib_firmware-2006-11-12.tar.gz ) -" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="amd64 ~arm ~x86" -IUSE="isa pcmcia static debug guile perl php python tcl doc firmware" - -COMMONDEPEND=" - tcl? ( dev-lang/tcl:0= ) - guile? ( dev-scheme/guile:12 ) - perl? ( dev-lang/perl:= ) - php? ( dev-lang/php:= ) - python? ( ${PYTHON_DEPS} ) - firmware? ( sys-apps/fxload )" -RDEPEND="${COMMONDEPEND}" -DEPEND="${COMMONDEPEND} - virtual/pkgconfig - doc? ( app-text/docbook-sgml-utils ) - perl? ( virtual/perl-ExtUtils-MakeMaker )" - -REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )" - -PATCHES=( - "${FILESDIR}"/${PN}-3.2.21-build.patch - "${FILESDIR}"/${PN}-3.2.16-perl.patch - "${FILESDIR}"/${PN}-4.0.3-reallydie.patch -) - -S=${WORKDIR}/${PN}-${MY_PV} - -pkg_setup () { - use perl && perl_set_version - use python && python_setup - - CONFIG_CHECK="!VMAP_STACK" - linux-mod_pkg_setup - - if kernel_is -lt 2 6 8; then - die "Kernel versions older than 2.6.8 are not supported." - fi - - # https://sourceforge.net/tracker/?func=detail&aid=3285657&group_id=42378&atid=432940 - if use pcmcia && kernel_is -ge 2 6 38; then - die "pcmcia support is broken on kernels newer 2.6.38" - fi -} - -src_prepare () { - default - kernel_is ge 4 11 0 && eapply "${FILESDIR}"/${PN}-4.0.4_rc2-kernel-4.11.0.patch - eautoreconf -} - -src_configure() { - set_arch_to_kernel - econf \ - $(use_enable isa) \ - $(use_enable pcmcia) \ - $(use_enable static) \ - $(use_enable debug driver-debug) \ - $(use_enable guile guile-binding) \ - $(use_enable perl perl-binding) \ - $(use_enable php php-binding) \ - $(use_enable python python-binding) \ - $(use_enable tcl tcl-binding) \ - $(use_enable doc documentation) \ - --with-linux-srcdir=${KV_DIR} -} - -src_compile() { - set_arch_to_kernel - FIRM_DIR=/usr/share/usb - emake \ - DESTDIR="${D}" \ - INSTALL_MOD_PATH="${D}" \ - HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \ - UDEV_RULES_DIR="${D}$(get_udevdir)"/rules.d \ - USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \ - docdir=/usr/share/doc/${PF}/html -} - -src_install() { - set_arch_to_kernel - FIRM_DIR=/usr/share/usb - emake \ - DESTDIR="${D}" \ - INSTALL_MOD_PATH="${D}" \ - HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \ - UDEV_RULES_DIR="${D}/$(get_udevdir)"/rules.d \ - USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \ - docdir=/usr/share/doc/${PF}/html install - - if use perl; then - einfo "Installing perl module" - cd "${S}"/language/perl || die - DESTDIR=${D} emake install - perl_fix_packlist - perl_delete_emptybsdir - cd "${S}" || die - fi - - echo "KERNEL==\"gpib[0-9]*\", MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules - udev_dorules 99-gpib.rules - - dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS - - insinto /etc - newins util/templates/gpib.conf gpib.conf - newins util/templates/gpib.conf gpib.conf.example - - if use pcmcia; then - dodir /etc/pcmcia - insinto /etc/pcmcia - doins "${S}"/etc/pcmcia/* - fi - - if use firmware; then - insinto "${FIRM_DIR}"/agilent_82357a - doins "${WORKDIR}"/gpib_firmware-2006-11-12/agilent_82357a/* - - insinto "${FIRM_DIR}"/ni_gpib_usb_b - doins "${WORKDIR}"/gpib_firmware-2006-11-12/ni_gpib_usb_b/* - - insinto /usr/share/linux-gpib/hp_82341 - # do not install precompiled generate_firmware - doins "${WORKDIR}"/gpib_firmware-2006-11-12/hp_82341/{*.bin,README} - fi - - # fix rules files - local f - find "${D}$(get_udevdir)"/rules.d -type f -print0 | while read -rd '' f ; do - grep -q "${D}" "${f}" && einfo "File ${f} contains a temporary path, fixing." - sed -i -e "s:${D}:/:g" "${f}" - done - - DOC_CONTENTS=" -You need to run the 'gpib_config' utility to setup the driver before -you can use it. In order to do it automatically you can add to your -start script something like this (supposing the appropriate driver -is loaded on the startup): -\n - gpib_config --minor 0 -\n -To give a user access to the computer's gpib board you will have to add -them to the group 'gpib' or, you could change the permissions on the device -files /dev/gpib[0-15] to something you like better, using 'chmod' -\n -Edit /etc/gpib.conf to match your interface board, and any devices you wish -to open via ibfind(). See the documentation in /usr/share/linux-gpib/html for -more information. -\n -" - - if use pcmcia; then - DOC_CONTENTS+=' -For PCMCIA cards:\n -All files needed for a PCMCIA board were copied to /etc/pcmcia. -You may wish to edit the options passed to the gpib_config call in the -/etc/pcmcia/linux-gpib-pcmcia script. -You may need to send a SIGHUP signal to the cardmgr daemon to force it -to reload the files in /etc/pcmcia \(alternatively you could use your -pcmcia init.d script to restart the cardmgr, or you could just reboot\). -The driver module will be loaded as needed by the cardmgr. - -' - fi - - if use firmware; then - DOC_CONTENTS+=' -For Agilent \(HP\) 82341C and 82341D cards: -The firmware for these boards is uploaded by passing the appropriate -firmware file from /usr/share/linux-gpib/hp_82341 directory to -gpib_config using the -I or --init-data command line option. Example:\n -gpib_config --minor 0 --init-data /usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin -' - fi - - readme.gentoo_create_doc -} - -pkg_preinst () { - linux-mod_pkg_preinst - use perl && perl_set_version - enewgroup gpib -} - -pkg_postinst () { - linux-mod_pkg_postinst - readme.gentoo_print_elog - - local v - for v in ${REPLACING_VERSIONS}; do - if ! version_is_at_least 3.2.21-r1 ${v}; then - ewarn "sci-libs/linux-gpib-3.2.21-r1 introduces incompatible changes to the kernel" - ewarn "interface. You may need to reboot to make sure the newly built driver modules" - ewarn "are used (some of the driver modules cannot be unloaded)." - ewarn "If you do not do this, every gpib call will just result in an error message." - break - fi - done -} diff --git a/sci-libs/linux-gpib/linux-gpib-4.0.4_rc3.ebuild b/sci-libs/linux-gpib/linux-gpib-4.0.4_rc3.ebuild deleted file mode 100644 index 16db1db66082..000000000000 --- a/sci-libs/linux-gpib/linux-gpib-4.0.4_rc3.ebuild +++ /dev/null @@ -1,215 +0,0 @@ -# Copyright 1999-2017 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -EAPI=6 - -PYTHON_COMPAT=( python2_7 ) - -inherit linux-info readme.gentoo-r1 versionator eutils linux-mod autotools perl-functions python-single-r1 toolchain-funcs udev user - -MY_PV=${PV/_/} - -DESCRIPTION="Kernel module and driver library for GPIB (IEEE 488.2) hardware" -HOMEPAGE="http://linux-gpib.sourceforge.net/" -SRC_URI="mirror://sourceforge/linux-gpib/${PN}-${MY_PV}.tar.gz - firmware? ( http://linux-gpib.sourceforge.net/firmware/gpib_firmware-2006-11-12.tar.gz ) -" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="~amd64 ~arm ~x86" -IUSE="isa pcmcia static debug guile perl php python tcl doc firmware" - -COMMONDEPEND=" - tcl? ( dev-lang/tcl:0= ) - guile? ( dev-scheme/guile:12 ) - perl? ( dev-lang/perl:= ) - php? ( dev-lang/php:= ) - python? ( ${PYTHON_DEPS} ) - firmware? ( sys-apps/fxload )" -RDEPEND="${COMMONDEPEND}" -DEPEND="${COMMONDEPEND} - virtual/pkgconfig - doc? ( app-text/docbook-sgml-utils ) - perl? ( virtual/perl-ExtUtils-MakeMaker )" - -REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )" - -PATCHES=( - "${FILESDIR}"/${PN}-3.2.21-build.patch - "${FILESDIR}"/${PN}-3.2.16-perl.patch - "${FILESDIR}"/${PN}-4.0.3-reallydie.patch -) - -S=${WORKDIR}/${PN}-${MY_PV} - -pkg_setup () { - use perl && perl_set_version - use python && python_setup - - linux-mod_pkg_setup - - if kernel_is -lt 2 6 8; then - die "Kernel versions older than 2.6.8 are not supported." - fi - - # https://sourceforge.net/tracker/?func=detail&aid=3285657&group_id=42378&atid=432940 - if use pcmcia && kernel_is -ge 2 6 38; then - die "pcmcia support is broken on kernels newer 2.6.38" - fi -} - -src_prepare () { - default - kernel_is ge 4 11 0 && eapply "${FILESDIR}"/${PN}-4.0.4_rc2-kernel-4.11.0.patch - eautoreconf -} - -src_configure() { - set_arch_to_kernel - econf \ - $(use_enable isa) \ - $(use_enable pcmcia) \ - $(use_enable static) \ - $(use_enable debug driver-debug) \ - $(use_enable guile guile-binding) \ - $(use_enable perl perl-binding) \ - $(use_enable php php-binding) \ - $(use_enable python python-binding) \ - $(use_enable tcl tcl-binding) \ - $(use_enable doc documentation) \ - --with-linux-srcdir=${KV_DIR} -} - -src_compile() { - set_arch_to_kernel - FIRM_DIR=/usr/share/usb - emake \ - DESTDIR="${D}" \ - INSTALL_MOD_PATH="${D}" \ - HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \ - UDEV_RULES_DIR="${D}$(get_udevdir)"/rules.d \ - USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \ - docdir=/usr/share/doc/${PF}/html -} - -src_install() { - set_arch_to_kernel - FIRM_DIR=/usr/share/usb - emake \ - DESTDIR="${D}" \ - INSTALL_MOD_PATH="${D}" \ - HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \ - UDEV_RULES_DIR="${D}/$(get_udevdir)"/rules.d \ - USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \ - docdir=/usr/share/doc/${PF}/html install - - if use perl; then - einfo "Installing perl module" - cd "${S}"/language/perl || die - DESTDIR=${D} emake install - perl_fix_packlist - perl_delete_emptybsdir - cd "${S}" || die - fi - - echo "KERNEL==\"gpib[0-9]*\", MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules - udev_dorules 99-gpib.rules - - dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS - - insinto /etc - newins util/templates/gpib.conf gpib.conf - newins util/templates/gpib.conf gpib.conf.example - - if use pcmcia; then - dodir /etc/pcmcia - insinto /etc/pcmcia - doins "${S}"/etc/pcmcia/* - fi - - if use firmware; then - insinto "${FIRM_DIR}"/agilent_82357a - doins "${WORKDIR}"/gpib_firmware-2006-11-12/agilent_82357a/* - - insinto "${FIRM_DIR}"/ni_gpib_usb_b - doins "${WORKDIR}"/gpib_firmware-2006-11-12/ni_gpib_usb_b/* - - insinto /usr/share/linux-gpib/hp_82341 - # do not install precompiled generate_firmware - doins "${WORKDIR}"/gpib_firmware-2006-11-12/hp_82341/{*.bin,README} - fi - - # fix rules files - local f - find "${D}$(get_udevdir)"/rules.d -type f -print0 | while read -rd '' f ; do - grep -q "${D}" "${f}" && einfo "File ${f} contains a temporary path, fixing." - sed -i -e "s:${D}:/:g" "${f}" - done - - DOC_CONTENTS=" -You need to run the 'gpib_config' utility to setup the driver before -you can use it. In order to do it automatically you can add to your -start script something like this (supposing the appropriate driver -is loaded on the startup): -\n - gpib_config --minor 0 -\n -To give a user access to the computer's gpib board you will have to add -them to the group 'gpib' or, you could change the permissions on the device -files /dev/gpib[0-15] to something you like better, using 'chmod' -\n -Edit /etc/gpib.conf to match your interface board, and any devices you wish -to open via ibfind(). See the documentation in /usr/share/linux-gpib/html for -more information. -\n -" - - if use pcmcia; then - DOC_CONTENTS+=' -For PCMCIA cards:\n -All files needed for a PCMCIA board were copied to /etc/pcmcia. -You may wish to edit the options passed to the gpib_config call in the -/etc/pcmcia/linux-gpib-pcmcia script. -You may need to send a SIGHUP signal to the cardmgr daemon to force it -to reload the files in /etc/pcmcia \(alternatively you could use your -pcmcia init.d script to restart the cardmgr, or you could just reboot\). -The driver module will be loaded as needed by the cardmgr. - -' - fi - - if use firmware; then - DOC_CONTENTS+=' -For Agilent \(HP\) 82341C and 82341D cards: -The firmware for these boards is uploaded by passing the appropriate -firmware file from /usr/share/linux-gpib/hp_82341 directory to -gpib_config using the -I or --init-data command line option. Example:\n -gpib_config --minor 0 --init-data /usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin -' - fi - - readme.gentoo_create_doc -} - -pkg_preinst () { - linux-mod_pkg_preinst - use perl && perl_set_version - enewgroup gpib -} - -pkg_postinst () { - linux-mod_pkg_postinst - readme.gentoo_print_elog - - local v - for v in ${REPLACING_VERSIONS}; do - if ! version_is_at_least 3.2.21-r1 ${v}; then - ewarn "sci-libs/linux-gpib-3.2.21-r1 introduces incompatible changes to the kernel" - ewarn "interface. You may need to reboot to make sure the newly built driver modules" - ewarn "are used (some of the driver modules cannot be unloaded)." - ewarn "If you do not do this, every gpib call will just result in an error message." - break - fi - done -} diff --git a/sci-libs/linux-gpib/linux-gpib-4.1.0.ebuild b/sci-libs/linux-gpib/linux-gpib-4.1.0.ebuild index 16db1db66082..8430c062a4bf 100644 --- a/sci-libs/linux-gpib/linux-gpib-4.1.0.ebuild +++ b/sci-libs/linux-gpib/linux-gpib-4.1.0.ebuild @@ -17,7 +17,7 @@ SRC_URI="mirror://sourceforge/linux-gpib/${PN}-${MY_PV}.tar.gz LICENSE="GPL-2" SLOT="0" -KEYWORDS="~amd64 ~arm ~x86" +KEYWORDS="amd64 ~arm ~x86" IUSE="isa pcmcia static debug guile perl php python tcl doc firmware" COMMONDEPEND=" -- cgit v1.2.3