From d934827bf44b7cfcf6711964418148fa60877668 Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Wed, 25 Nov 2020 22:39:15 +0000 Subject: gentoo resync : 25.11.2020 --- profiles/default/linux/amd64/17.0/deprecated | 59 ++++++++++++++++++++++ .../default/linux/amd64/17.0/desktop/deprecated | 59 ++++++++++++++++++++++ .../linux/amd64/17.0/desktop/gnome/deprecated | 59 ++++++++++++++++++++++ .../amd64/17.0/desktop/gnome/systemd/deprecated | 59 ++++++++++++++++++++++ .../linux/amd64/17.0/desktop/plasma/deprecated | 59 ++++++++++++++++++++++ .../amd64/17.0/desktop/plasma/systemd/deprecated | 59 ++++++++++++++++++++++ .../default/linux/amd64/17.0/developer/deprecated | 59 ++++++++++++++++++++++ .../default/linux/amd64/17.0/hardened/deprecated | 59 ++++++++++++++++++++++ .../linux/amd64/17.0/hardened/selinux/deprecated | 59 ++++++++++++++++++++++ .../linux/amd64/17.0/no-multilib/deprecated | 59 ++++++++++++++++++++++ .../amd64/17.0/no-multilib/hardened/deprecated | 59 ++++++++++++++++++++++ .../17.0/no-multilib/hardened/selinux/deprecated | 59 ++++++++++++++++++++++ .../default/linux/amd64/17.0/selinux/deprecated | 59 ++++++++++++++++++++++ .../default/linux/amd64/17.0/systemd/deprecated | 59 ++++++++++++++++++++++ .../17.1/no-multilib/prefix/kernel-2.6.16+/eapi | 1 + .../17.1/no-multilib/prefix/kernel-2.6.16+/parent | 2 + .../17.1/no-multilib/prefix/kernel-2.6.32+/eapi | 1 + .../17.1/no-multilib/prefix/kernel-2.6.32+/parent | 2 + .../amd64/17.1/no-multilib/prefix/kernel-3.2+/eapi | 1 + .../17.1/no-multilib/prefix/kernel-3.2+/parent | 2 + .../linux/amd64/17.1/no-multilib/prefix/parent | 1 + profiles/default/linux/hppa/package.use.mask | 4 -- profiles/default/linux/musl/package.use.mask | 3 ++ profiles/default/linux/package.use.mask | 10 +--- 24 files changed, 840 insertions(+), 13 deletions(-) create mode 100644 profiles/default/linux/amd64/17.0/deprecated create mode 100644 profiles/default/linux/amd64/17.0/desktop/deprecated create mode 100644 profiles/default/linux/amd64/17.0/desktop/gnome/deprecated create mode 100644 profiles/default/linux/amd64/17.0/desktop/gnome/systemd/deprecated create mode 100644 profiles/default/linux/amd64/17.0/desktop/plasma/deprecated create mode 100644 profiles/default/linux/amd64/17.0/desktop/plasma/systemd/deprecated create mode 100644 profiles/default/linux/amd64/17.0/developer/deprecated create mode 100644 profiles/default/linux/amd64/17.0/hardened/deprecated create mode 100644 profiles/default/linux/amd64/17.0/hardened/selinux/deprecated create mode 100644 profiles/default/linux/amd64/17.0/no-multilib/deprecated create mode 100644 profiles/default/linux/amd64/17.0/no-multilib/hardened/deprecated create mode 100644 profiles/default/linux/amd64/17.0/no-multilib/hardened/selinux/deprecated create mode 100644 profiles/default/linux/amd64/17.0/selinux/deprecated create mode 100644 profiles/default/linux/amd64/17.0/systemd/deprecated create mode 100644 profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.16+/eapi create mode 100644 profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.16+/parent create mode 100644 profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.32+/eapi create mode 100644 profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.32+/parent create mode 100644 profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-3.2+/eapi create mode 100644 profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-3.2+/parent create mode 100644 profiles/default/linux/amd64/17.1/no-multilib/prefix/parent (limited to 'profiles/default/linux') diff --git a/profiles/default/linux/amd64/17.0/deprecated b/profiles/default/linux/amd64/17.0/deprecated new file mode 100644 index 000000000000..c11d41187d8d --- /dev/null +++ b/profiles/default/linux/amd64/17.0/deprecated @@ -0,0 +1,59 @@ +default/linux/amd64/17.1 + +The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' +multilib layout, and require an explicit migration. +The migration is performed using the app-portage/unsymlink-lib tool. +The following steps can be used to upgrade your system: + +1. Sync and upgrade your system to the newest package versions + to reduce the risk of issues. + +2. Install the tool: + # emerge -1v app-portage/unsymlink-lib + +3. Run 'unsymlink-lib --analyze' and check the output for obvious + mistakes. If you need to perform any changes to the system, remember + to run 'unsymlink-lib --analyze' again afterwards. + +[past this point do not call emerge or modify /usr manually] + +4. This is a very good time to make a backup. + +5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see + what is going to happen. + +6. Reboot your system. Check if important programs work. + In particular, verify that e.g. 'emerge --info' works (but do not + install anything). If you hit any serious problems, you can use + 'unsymlink-lib --rollback' to revert the changes and return to + step 3. + +7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see + what is going to happen but note that you're going to see a very long + list of files to remove. + +8. Switch the profile, e.g.: + # eselect profile set default/linux/amd64/17.1/desktop + +[at this point you can start using emerge again. emerge will then + not display this message anymore, but the remaining steps are still + required!] + +9. Rebuild gcc: + # emerge -1v sys-devel/gcc:9.3.0 + [ repeat for other slots you will be using ] + +10. If you are using a multilib profile, rebuild all 32-bit packages. + This can be done using: + # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 + +11. Once the last 32-bit package is rebuilt, your package manager + should remove the orphaned /lib32 and /usr/lib32 symlinks. If that + does not happen, remove them manually: + # rm /lib32 /usr/lib32 + +For known issues, please see bug #506276 [1]. If you have any problems +with the new profiles or the migration procedure, please report a bug +and make it block the tracker. + +[1] https://bugs.gentoo.org/506276 diff --git a/profiles/default/linux/amd64/17.0/desktop/deprecated b/profiles/default/linux/amd64/17.0/desktop/deprecated new file mode 100644 index 000000000000..d29b4ea76578 --- /dev/null +++ b/profiles/default/linux/amd64/17.0/desktop/deprecated @@ -0,0 +1,59 @@ +default/linux/amd64/17.1/desktop + +The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' +multilib layout, and require an explicit migration. +The migration is performed using the app-portage/unsymlink-lib tool. +The following steps can be used to upgrade your system: + +1. Sync and upgrade your system to the newest package versions + to reduce the risk of issues. + +2. Install the tool: + # emerge -1v app-portage/unsymlink-lib + +3. Run 'unsymlink-lib --analyze' and check the output for obvious + mistakes. If you need to perform any changes to the system, remember + to run 'unsymlink-lib --analyze' again afterwards. + +[past this point do not call emerge or modify /usr manually] + +4. This is a very good time to make a backup. + +5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see + what is going to happen. + +6. Reboot your system. Check if important programs work. + In particular, verify that e.g. 'emerge --info' works (but do not + install anything). If you hit any serious problems, you can use + 'unsymlink-lib --rollback' to revert the changes and return to + step 3. + +7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see + what is going to happen but note that you're going to see a very long + list of files to remove. + +8. Switch the profile, e.g.: + # eselect profile set default/linux/amd64/17.1/desktop + +[at this point you can start using emerge again. emerge will then + not display this message anymore, but the remaining steps are still + required!] + +9. Rebuild gcc: + # emerge -1v sys-devel/gcc:9.3.0 + [ repeat for other slots you will be using ] + +10. If you are using a multilib profile, rebuild all 32-bit packages. + This can be done using: + # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 + +11. Once the last 32-bit package is rebuilt, your package manager + should remove the orphaned /lib32 and /usr/lib32 symlinks. If that + does not happen, remove them manually: + # rm /lib32 /usr/lib32 + +For known issues, please see bug #506276 [1]. If you have any problems +with the new profiles or the migration procedure, please report a bug +and make it block the tracker. + +[1] https://bugs.gentoo.org/506276 diff --git a/profiles/default/linux/amd64/17.0/desktop/gnome/deprecated b/profiles/default/linux/amd64/17.0/desktop/gnome/deprecated new file mode 100644 index 000000000000..e65fc37f913d --- /dev/null +++ b/profiles/default/linux/amd64/17.0/desktop/gnome/deprecated @@ -0,0 +1,59 @@ +default/linux/amd64/17.1/desktop/gnome + +The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' +multilib layout, and require an explicit migration. +The migration is performed using the app-portage/unsymlink-lib tool. +The following steps can be used to upgrade your system: + +1. Sync and upgrade your system to the newest package versions + to reduce the risk of issues. + +2. Install the tool: + # emerge -1v app-portage/unsymlink-lib + +3. Run 'unsymlink-lib --analyze' and check the output for obvious + mistakes. If you need to perform any changes to the system, remember + to run 'unsymlink-lib --analyze' again afterwards. + +[past this point do not call emerge or modify /usr manually] + +4. This is a very good time to make a backup. + +5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see + what is going to happen. + +6. Reboot your system. Check if important programs work. + In particular, verify that e.g. 'emerge --info' works (but do not + install anything). If you hit any serious problems, you can use + 'unsymlink-lib --rollback' to revert the changes and return to + step 3. + +7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see + what is going to happen but note that you're going to see a very long + list of files to remove. + +8. Switch the profile, e.g.: + # eselect profile set default/linux/amd64/17.1/desktop + +[at this point you can start using emerge again. emerge will then + not display this message anymore, but the remaining steps are still + required!] + +9. Rebuild gcc: + # emerge -1v sys-devel/gcc:9.3.0 + [ repeat for other slots you will be using ] + +10. If you are using a multilib profile, rebuild all 32-bit packages. + This can be done using: + # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 + +11. Once the last 32-bit package is rebuilt, your package manager + should remove the orphaned /lib32 and /usr/lib32 symlinks. If that + does not happen, remove them manually: + # rm /lib32 /usr/lib32 + +For known issues, please see bug #506276 [1]. If you have any problems +with the new profiles or the migration procedure, please report a bug +and make it block the tracker. + +[1] https://bugs.gentoo.org/506276 diff --git a/profiles/default/linux/amd64/17.0/desktop/gnome/systemd/deprecated b/profiles/default/linux/amd64/17.0/desktop/gnome/systemd/deprecated new file mode 100644 index 000000000000..d5c8416510da --- /dev/null +++ b/profiles/default/linux/amd64/17.0/desktop/gnome/systemd/deprecated @@ -0,0 +1,59 @@ +default/linux/amd64/17.1/desktop/gnome/systemd + +The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' +multilib layout, and require an explicit migration. +The migration is performed using the app-portage/unsymlink-lib tool. +The following steps can be used to upgrade your system: + +1. Sync and upgrade your system to the newest package versions + to reduce the risk of issues. + +2. Install the tool: + # emerge -1v app-portage/unsymlink-lib + +3. Run 'unsymlink-lib --analyze' and check the output for obvious + mistakes. If you need to perform any changes to the system, remember + to run 'unsymlink-lib --analyze' again afterwards. + +[past this point do not call emerge or modify /usr manually] + +4. This is a very good time to make a backup. + +5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see + what is going to happen. + +6. Reboot your system. Check if important programs work. + In particular, verify that e.g. 'emerge --info' works (but do not + install anything). If you hit any serious problems, you can use + 'unsymlink-lib --rollback' to revert the changes and return to + step 3. + +7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see + what is going to happen but note that you're going to see a very long + list of files to remove. + +8. Switch the profile, e.g.: + # eselect profile set default/linux/amd64/17.1/desktop + +[at this point you can start using emerge again. emerge will then + not display this message anymore, but the remaining steps are still + required!] + +9. Rebuild gcc: + # emerge -1v sys-devel/gcc:9.3.0 + [ repeat for other slots you will be using ] + +10. If you are using a multilib profile, rebuild all 32-bit packages. + This can be done using: + # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 + +11. Once the last 32-bit package is rebuilt, your package manager + should remove the orphaned /lib32 and /usr/lib32 symlinks. If that + does not happen, remove them manually: + # rm /lib32 /usr/lib32 + +For known issues, please see bug #506276 [1]. If you have any problems +with the new profiles or the migration procedure, please report a bug +and make it block the tracker. + +[1] https://bugs.gentoo.org/506276 diff --git a/profiles/default/linux/amd64/17.0/desktop/plasma/deprecated b/profiles/default/linux/amd64/17.0/desktop/plasma/deprecated new file mode 100644 index 000000000000..c05ef3691bc5 --- /dev/null +++ b/profiles/default/linux/amd64/17.0/desktop/plasma/deprecated @@ -0,0 +1,59 @@ +default/linux/amd64/17.1/desktop/plasma + +The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' +multilib layout, and require an explicit migration. +The migration is performed using the app-portage/unsymlink-lib tool. +The following steps can be used to upgrade your system: + +1. Sync and upgrade your system to the newest package versions + to reduce the risk of issues. + +2. Install the tool: + # emerge -1v app-portage/unsymlink-lib + +3. Run 'unsymlink-lib --analyze' and check the output for obvious + mistakes. If you need to perform any changes to the system, remember + to run 'unsymlink-lib --analyze' again afterwards. + +[past this point do not call emerge or modify /usr manually] + +4. This is a very good time to make a backup. + +5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see + what is going to happen. + +6. Reboot your system. Check if important programs work. + In particular, verify that e.g. 'emerge --info' works (but do not + install anything). If you hit any serious problems, you can use + 'unsymlink-lib --rollback' to revert the changes and return to + step 3. + +7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see + what is going to happen but note that you're going to see a very long + list of files to remove. + +8. Switch the profile, e.g.: + # eselect profile set default/linux/amd64/17.1/desktop + +[at this point you can start using emerge again. emerge will then + not display this message anymore, but the remaining steps are still + required!] + +9. Rebuild gcc: + # emerge -1v sys-devel/gcc:9.3.0 + [ repeat for other slots you will be using ] + +10. If you are using a multilib profile, rebuild all 32-bit packages. + This can be done using: + # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 + +11. Once the last 32-bit package is rebuilt, your package manager + should remove the orphaned /lib32 and /usr/lib32 symlinks. If that + does not happen, remove them manually: + # rm /lib32 /usr/lib32 + +For known issues, please see bug #506276 [1]. If you have any problems +with the new profiles or the migration procedure, please report a bug +and make it block the tracker. + +[1] https://bugs.gentoo.org/506276 diff --git a/profiles/default/linux/amd64/17.0/desktop/plasma/systemd/deprecated b/profiles/default/linux/amd64/17.0/desktop/plasma/systemd/deprecated new file mode 100644 index 000000000000..f817b8c47e0e --- /dev/null +++ b/profiles/default/linux/amd64/17.0/desktop/plasma/systemd/deprecated @@ -0,0 +1,59 @@ +default/linux/amd64/17.1/desktop/plasma/systemd + +The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' +multilib layout, and require an explicit migration. +The migration is performed using the app-portage/unsymlink-lib tool. +The following steps can be used to upgrade your system: + +1. Sync and upgrade your system to the newest package versions + to reduce the risk of issues. + +2. Install the tool: + # emerge -1v app-portage/unsymlink-lib + +3. Run 'unsymlink-lib --analyze' and check the output for obvious + mistakes. If you need to perform any changes to the system, remember + to run 'unsymlink-lib --analyze' again afterwards. + +[past this point do not call emerge or modify /usr manually] + +4. This is a very good time to make a backup. + +5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see + what is going to happen. + +6. Reboot your system. Check if important programs work. + In particular, verify that e.g. 'emerge --info' works (but do not + install anything). If you hit any serious problems, you can use + 'unsymlink-lib --rollback' to revert the changes and return to + step 3. + +7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see + what is going to happen but note that you're going to see a very long + list of files to remove. + +8. Switch the profile, e.g.: + # eselect profile set default/linux/amd64/17.1/desktop + +[at this point you can start using emerge again. emerge will then + not display this message anymore, but the remaining steps are still + required!] + +9. Rebuild gcc: + # emerge -1v sys-devel/gcc:9.3.0 + [ repeat for other slots you will be using ] + +10. If you are using a multilib profile, rebuild all 32-bit packages. + This can be done using: + # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 + +11. Once the last 32-bit package is rebuilt, your package manager + should remove the orphaned /lib32 and /usr/lib32 symlinks. If that + does not happen, remove them manually: + # rm /lib32 /usr/lib32 + +For known issues, please see bug #506276 [1]. If you have any problems +with the new profiles or the migration procedure, please report a bug +and make it block the tracker. + +[1] https://bugs.gentoo.org/506276 diff --git a/profiles/default/linux/amd64/17.0/developer/deprecated b/profiles/default/linux/amd64/17.0/developer/deprecated new file mode 100644 index 000000000000..5628b3931f36 --- /dev/null +++ b/profiles/default/linux/amd64/17.0/developer/deprecated @@ -0,0 +1,59 @@ +default/linux/amd64/17.1/developer + +The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' +multilib layout, and require an explicit migration. +The migration is performed using the app-portage/unsymlink-lib tool. +The following steps can be used to upgrade your system: + +1. Sync and upgrade your system to the newest package versions + to reduce the risk of issues. + +2. Install the tool: + # emerge -1v app-portage/unsymlink-lib + +3. Run 'unsymlink-lib --analyze' and check the output for obvious + mistakes. If you need to perform any changes to the system, remember + to run 'unsymlink-lib --analyze' again afterwards. + +[past this point do not call emerge or modify /usr manually] + +4. This is a very good time to make a backup. + +5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see + what is going to happen. + +6. Reboot your system. Check if important programs work. + In particular, verify that e.g. 'emerge --info' works (but do not + install anything). If you hit any serious problems, you can use + 'unsymlink-lib --rollback' to revert the changes and return to + step 3. + +7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see + what is going to happen but note that you're going to see a very long + list of files to remove. + +8. Switch the profile, e.g.: + # eselect profile set default/linux/amd64/17.1/desktop + +[at this point you can start using emerge again. emerge will then + not display this message anymore, but the remaining steps are still + required!] + +9. Rebuild gcc: + # emerge -1v sys-devel/gcc:9.3.0 + [ repeat for other slots you will be using ] + +10. If you are using a multilib profile, rebuild all 32-bit packages. + This can be done using: + # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 + +11. Once the last 32-bit package is rebuilt, your package manager + should remove the orphaned /lib32 and /usr/lib32 symlinks. If that + does not happen, remove them manually: + # rm /lib32 /usr/lib32 + +For known issues, please see bug #506276 [1]. If you have any problems +with the new profiles or the migration procedure, please report a bug +and make it block the tracker. + +[1] https://bugs.gentoo.org/506276 diff --git a/profiles/default/linux/amd64/17.0/hardened/deprecated b/profiles/default/linux/amd64/17.0/hardened/deprecated new file mode 100644 index 000000000000..1c1eadf982e9 --- /dev/null +++ b/profiles/default/linux/amd64/17.0/hardened/deprecated @@ -0,0 +1,59 @@ +default/linux/amd64/17.1/hardened + +The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' +multilib layout, and require an explicit migration. +The migration is performed using the app-portage/unsymlink-lib tool. +The following steps can be used to upgrade your system: + +1. Sync and upgrade your system to the newest package versions + to reduce the risk of issues. + +2. Install the tool: + # emerge -1v app-portage/unsymlink-lib + +3. Run 'unsymlink-lib --analyze' and check the output for obvious + mistakes. If you need to perform any changes to the system, remember + to run 'unsymlink-lib --analyze' again afterwards. + +[past this point do not call emerge or modify /usr manually] + +4. This is a very good time to make a backup. + +5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see + what is going to happen. + +6. Reboot your system. Check if important programs work. + In particular, verify that e.g. 'emerge --info' works (but do not + install anything). If you hit any serious problems, you can use + 'unsymlink-lib --rollback' to revert the changes and return to + step 3. + +7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see + what is going to happen but note that you're going to see a very long + list of files to remove. + +8. Switch the profile, e.g.: + # eselect profile set default/linux/amd64/17.1/desktop + +[at this point you can start using emerge again. emerge will then + not display this message anymore, but the remaining steps are still + required!] + +9. Rebuild gcc: + # emerge -1v sys-devel/gcc:9.3.0 + [ repeat for other slots you will be using ] + +10. If you are using a multilib profile, rebuild all 32-bit packages. + This can be done using: + # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 + +11. Once the last 32-bit package is rebuilt, your package manager + should remove the orphaned /lib32 and /usr/lib32 symlinks. If that + does not happen, remove them manually: + # rm /lib32 /usr/lib32 + +For known issues, please see bug #506276 [1]. If you have any problems +with the new profiles or the migration procedure, please report a bug +and make it block the tracker. + +[1] https://bugs.gentoo.org/506276 diff --git a/profiles/default/linux/amd64/17.0/hardened/selinux/deprecated b/profiles/default/linux/amd64/17.0/hardened/selinux/deprecated new file mode 100644 index 000000000000..7a9f9d079a5b --- /dev/null +++ b/profiles/default/linux/amd64/17.0/hardened/selinux/deprecated @@ -0,0 +1,59 @@ +default/linux/amd64/17.1/hardened/selinux + +The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' +multilib layout, and require an explicit migration. +The migration is performed using the app-portage/unsymlink-lib tool. +The following steps can be used to upgrade your system: + +1. Sync and upgrade your system to the newest package versions + to reduce the risk of issues. + +2. Install the tool: + # emerge -1v app-portage/unsymlink-lib + +3. Run 'unsymlink-lib --analyze' and check the output for obvious + mistakes. If you need to perform any changes to the system, remember + to run 'unsymlink-lib --analyze' again afterwards. + +[past this point do not call emerge or modify /usr manually] + +4. This is a very good time to make a backup. + +5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see + what is going to happen. + +6. Reboot your system. Check if important programs work. + In particular, verify that e.g. 'emerge --info' works (but do not + install anything). If you hit any serious problems, you can use + 'unsymlink-lib --rollback' to revert the changes and return to + step 3. + +7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see + what is going to happen but note that you're going to see a very long + list of files to remove. + +8. Switch the profile, e.g.: + # eselect profile set default/linux/amd64/17.1/desktop + +[at this point you can start using emerge again. emerge will then + not display this message anymore, but the remaining steps are still + required!] + +9. Rebuild gcc: + # emerge -1v sys-devel/gcc:9.3.0 + [ repeat for other slots you will be using ] + +10. If you are using a multilib profile, rebuild all 32-bit packages. + This can be done using: + # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 + +11. Once the last 32-bit package is rebuilt, your package manager + should remove the orphaned /lib32 and /usr/lib32 symlinks. If that + does not happen, remove them manually: + # rm /lib32 /usr/lib32 + +For known issues, please see bug #506276 [1]. If you have any problems +with the new profiles or the migration procedure, please report a bug +and make it block the tracker. + +[1] https://bugs.gentoo.org/506276 diff --git a/profiles/default/linux/amd64/17.0/no-multilib/deprecated b/profiles/default/linux/amd64/17.0/no-multilib/deprecated new file mode 100644 index 000000000000..7c071d514eed --- /dev/null +++ b/profiles/default/linux/amd64/17.0/no-multilib/deprecated @@ -0,0 +1,59 @@ +default/linux/amd64/17.1/no-multilib + +The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' +multilib layout, and require an explicit migration. +The migration is performed using the app-portage/unsymlink-lib tool. +The following steps can be used to upgrade your system: + +1. Sync and upgrade your system to the newest package versions + to reduce the risk of issues. + +2. Install the tool: + # emerge -1v app-portage/unsymlink-lib + +3. Run 'unsymlink-lib --analyze' and check the output for obvious + mistakes. If you need to perform any changes to the system, remember + to run 'unsymlink-lib --analyze' again afterwards. + +[past this point do not call emerge or modify /usr manually] + +4. This is a very good time to make a backup. + +5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see + what is going to happen. + +6. Reboot your system. Check if important programs work. + In particular, verify that e.g. 'emerge --info' works (but do not + install anything). If you hit any serious problems, you can use + 'unsymlink-lib --rollback' to revert the changes and return to + step 3. + +7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see + what is going to happen but note that you're going to see a very long + list of files to remove. + +8. Switch the profile, e.g.: + # eselect profile set default/linux/amd64/17.1/desktop + +[at this point you can start using emerge again. emerge will then + not display this message anymore, but the remaining steps are still + required!] + +9. Rebuild gcc: + # emerge -1v sys-devel/gcc:9.3.0 + [ repeat for other slots you will be using ] + +10. If you are using a multilib profile, rebuild all 32-bit packages. + This can be done using: + # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 + +11. Once the last 32-bit package is rebuilt, your package manager + should remove the orphaned /lib32 and /usr/lib32 symlinks. If that + does not happen, remove them manually: + # rm /lib32 /usr/lib32 + +For known issues, please see bug #506276 [1]. If you have any problems +with the new profiles or the migration procedure, please report a bug +and make it block the tracker. + +[1] https://bugs.gentoo.org/506276 diff --git a/profiles/default/linux/amd64/17.0/no-multilib/hardened/deprecated b/profiles/default/linux/amd64/17.0/no-multilib/hardened/deprecated new file mode 100644 index 000000000000..b5d8bd8b093d --- /dev/null +++ b/profiles/default/linux/amd64/17.0/no-multilib/hardened/deprecated @@ -0,0 +1,59 @@ +default/linux/amd64/17.1/no-multilib/hardened + +The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' +multilib layout, and require an explicit migration. +The migration is performed using the app-portage/unsymlink-lib tool. +The following steps can be used to upgrade your system: + +1. Sync and upgrade your system to the newest package versions + to reduce the risk of issues. + +2. Install the tool: + # emerge -1v app-portage/unsymlink-lib + +3. Run 'unsymlink-lib --analyze' and check the output for obvious + mistakes. If you need to perform any changes to the system, remember + to run 'unsymlink-lib --analyze' again afterwards. + +[past this point do not call emerge or modify /usr manually] + +4. This is a very good time to make a backup. + +5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see + what is going to happen. + +6. Reboot your system. Check if important programs work. + In particular, verify that e.g. 'emerge --info' works (but do not + install anything). If you hit any serious problems, you can use + 'unsymlink-lib --rollback' to revert the changes and return to + step 3. + +7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see + what is going to happen but note that you're going to see a very long + list of files to remove. + +8. Switch the profile, e.g.: + # eselect profile set default/linux/amd64/17.1/desktop + +[at this point you can start using emerge again. emerge will then + not display this message anymore, but the remaining steps are still + required!] + +9. Rebuild gcc: + # emerge -1v sys-devel/gcc:9.3.0 + [ repeat for other slots you will be using ] + +10. If you are using a multilib profile, rebuild all 32-bit packages. + This can be done using: + # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 + +11. Once the last 32-bit package is rebuilt, your package manager + should remove the orphaned /lib32 and /usr/lib32 symlinks. If that + does not happen, remove them manually: + # rm /lib32 /usr/lib32 + +For known issues, please see bug #506276 [1]. If you have any problems +with the new profiles or the migration procedure, please report a bug +and make it block the tracker. + +[1] https://bugs.gentoo.org/506276 diff --git a/profiles/default/linux/amd64/17.0/no-multilib/hardened/selinux/deprecated b/profiles/default/linux/amd64/17.0/no-multilib/hardened/selinux/deprecated new file mode 100644 index 000000000000..0d123229db03 --- /dev/null +++ b/profiles/default/linux/amd64/17.0/no-multilib/hardened/selinux/deprecated @@ -0,0 +1,59 @@ +default/linux/amd64/17.1/no-multilib/hardened/selinux + +The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' +multilib layout, and require an explicit migration. +The migration is performed using the app-portage/unsymlink-lib tool. +The following steps can be used to upgrade your system: + +1. Sync and upgrade your system to the newest package versions + to reduce the risk of issues. + +2. Install the tool: + # emerge -1v app-portage/unsymlink-lib + +3. Run 'unsymlink-lib --analyze' and check the output for obvious + mistakes. If you need to perform any changes to the system, remember + to run 'unsymlink-lib --analyze' again afterwards. + +[past this point do not call emerge or modify /usr manually] + +4. This is a very good time to make a backup. + +5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see + what is going to happen. + +6. Reboot your system. Check if important programs work. + In particular, verify that e.g. 'emerge --info' works (but do not + install anything). If you hit any serious problems, you can use + 'unsymlink-lib --rollback' to revert the changes and return to + step 3. + +7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see + what is going to happen but note that you're going to see a very long + list of files to remove. + +8. Switch the profile, e.g.: + # eselect profile set default/linux/amd64/17.1/desktop + +[at this point you can start using emerge again. emerge will then + not display this message anymore, but the remaining steps are still + required!] + +9. Rebuild gcc: + # emerge -1v sys-devel/gcc:9.3.0 + [ repeat for other slots you will be using ] + +10. If you are using a multilib profile, rebuild all 32-bit packages. + This can be done using: + # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 + +11. Once the last 32-bit package is rebuilt, your package manager + should remove the orphaned /lib32 and /usr/lib32 symlinks. If that + does not happen, remove them manually: + # rm /lib32 /usr/lib32 + +For known issues, please see bug #506276 [1]. If you have any problems +with the new profiles or the migration procedure, please report a bug +and make it block the tracker. + +[1] https://bugs.gentoo.org/506276 diff --git a/profiles/default/linux/amd64/17.0/selinux/deprecated b/profiles/default/linux/amd64/17.0/selinux/deprecated new file mode 100644 index 000000000000..06df9d539675 --- /dev/null +++ b/profiles/default/linux/amd64/17.0/selinux/deprecated @@ -0,0 +1,59 @@ +default/linux/amd64/17.1/selinux + +The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' +multilib layout, and require an explicit migration. +The migration is performed using the app-portage/unsymlink-lib tool. +The following steps can be used to upgrade your system: + +1. Sync and upgrade your system to the newest package versions + to reduce the risk of issues. + +2. Install the tool: + # emerge -1v app-portage/unsymlink-lib + +3. Run 'unsymlink-lib --analyze' and check the output for obvious + mistakes. If you need to perform any changes to the system, remember + to run 'unsymlink-lib --analyze' again afterwards. + +[past this point do not call emerge or modify /usr manually] + +4. This is a very good time to make a backup. + +5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see + what is going to happen. + +6. Reboot your system. Check if important programs work. + In particular, verify that e.g. 'emerge --info' works (but do not + install anything). If you hit any serious problems, you can use + 'unsymlink-lib --rollback' to revert the changes and return to + step 3. + +7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see + what is going to happen but note that you're going to see a very long + list of files to remove. + +8. Switch the profile, e.g.: + # eselect profile set default/linux/amd64/17.1/desktop + +[at this point you can start using emerge again. emerge will then + not display this message anymore, but the remaining steps are still + required!] + +9. Rebuild gcc: + # emerge -1v sys-devel/gcc:9.3.0 + [ repeat for other slots you will be using ] + +10. If you are using a multilib profile, rebuild all 32-bit packages. + This can be done using: + # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 + +11. Once the last 32-bit package is rebuilt, your package manager + should remove the orphaned /lib32 and /usr/lib32 symlinks. If that + does not happen, remove them manually: + # rm /lib32 /usr/lib32 + +For known issues, please see bug #506276 [1]. If you have any problems +with the new profiles or the migration procedure, please report a bug +and make it block the tracker. + +[1] https://bugs.gentoo.org/506276 diff --git a/profiles/default/linux/amd64/17.0/systemd/deprecated b/profiles/default/linux/amd64/17.0/systemd/deprecated new file mode 100644 index 000000000000..9d35e3be2e3f --- /dev/null +++ b/profiles/default/linux/amd64/17.0/systemd/deprecated @@ -0,0 +1,59 @@ +default/linux/amd64/17.1/systemd + +The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' +multilib layout, and require an explicit migration. +The migration is performed using the app-portage/unsymlink-lib tool. +The following steps can be used to upgrade your system: + +1. Sync and upgrade your system to the newest package versions + to reduce the risk of issues. + +2. Install the tool: + # emerge -1v app-portage/unsymlink-lib + +3. Run 'unsymlink-lib --analyze' and check the output for obvious + mistakes. If you need to perform any changes to the system, remember + to run 'unsymlink-lib --analyze' again afterwards. + +[past this point do not call emerge or modify /usr manually] + +4. This is a very good time to make a backup. + +5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see + what is going to happen. + +6. Reboot your system. Check if important programs work. + In particular, verify that e.g. 'emerge --info' works (but do not + install anything). If you hit any serious problems, you can use + 'unsymlink-lib --rollback' to revert the changes and return to + step 3. + +7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see + what is going to happen but note that you're going to see a very long + list of files to remove. + +8. Switch the profile, e.g.: + # eselect profile set default/linux/amd64/17.1/desktop + +[at this point you can start using emerge again. emerge will then + not display this message anymore, but the remaining steps are still + required!] + +9. Rebuild gcc: + # emerge -1v sys-devel/gcc:9.3.0 + [ repeat for other slots you will be using ] + +10. If you are using a multilib profile, rebuild all 32-bit packages. + This can be done using: + # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 + +11. Once the last 32-bit package is rebuilt, your package manager + should remove the orphaned /lib32 and /usr/lib32 symlinks. If that + does not happen, remove them manually: + # rm /lib32 /usr/lib32 + +For known issues, please see bug #506276 [1]. If you have any problems +with the new profiles or the migration procedure, please report a bug +and make it block the tracker. + +[1] https://bugs.gentoo.org/506276 diff --git a/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.16+/eapi b/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.16+/eapi new file mode 100644 index 000000000000..7ed6ff82de6b --- /dev/null +++ b/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.16+/eapi @@ -0,0 +1 @@ +5 diff --git a/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.16+/parent b/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.16+/parent new file mode 100644 index 000000000000..665aafbea8db --- /dev/null +++ b/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.16+/parent @@ -0,0 +1,2 @@ +.. +../../../../../../../features/prefix/standalone/kernel-2.6.16+ diff --git a/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.32+/eapi b/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.32+/eapi new file mode 100644 index 000000000000..7ed6ff82de6b --- /dev/null +++ b/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.32+/eapi @@ -0,0 +1 @@ +5 diff --git a/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.32+/parent b/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.32+/parent new file mode 100644 index 000000000000..7eed652658f8 --- /dev/null +++ b/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-2.6.32+/parent @@ -0,0 +1,2 @@ +.. +../../../../../../../features/prefix/standalone/kernel-2.6.32+ diff --git a/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-3.2+/eapi b/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-3.2+/eapi new file mode 100644 index 000000000000..7ed6ff82de6b --- /dev/null +++ b/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-3.2+/eapi @@ -0,0 +1 @@ +5 diff --git a/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-3.2+/parent b/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-3.2+/parent new file mode 100644 index 000000000000..b3da232ba558 --- /dev/null +++ b/profiles/default/linux/amd64/17.1/no-multilib/prefix/kernel-3.2+/parent @@ -0,0 +1,2 @@ +.. +../../../../../../../features/prefix/standalone diff --git a/profiles/default/linux/amd64/17.1/no-multilib/prefix/parent b/profiles/default/linux/amd64/17.1/no-multilib/prefix/parent new file mode 100644 index 000000000000..f3229c5b9876 --- /dev/null +++ b/profiles/default/linux/amd64/17.1/no-multilib/prefix/parent @@ -0,0 +1 @@ +.. diff --git a/profiles/default/linux/hppa/package.use.mask b/profiles/default/linux/hppa/package.use.mask index 129881bf303d..60580e813822 100644 --- a/profiles/default/linux/hppa/package.use.mask +++ b/profiles/default/linux/hppa/package.use.mask @@ -7,8 +7,4 @@ # No hardware support for NUMA (bug #381313) sys-apps/hwloc numa -# Jeroen Roovers (2008-08-15) -# HPPA still isn't supported with anything but -O0. -www-client/firefox custom-optimization - # DON'T TOUCH THIS FILE. Instead, file a bug and assign it to . diff --git a/profiles/default/linux/musl/package.use.mask b/profiles/default/linux/musl/package.use.mask index ed9d78166df7..113ac0bd81a2 100644 --- a/profiles/default/linux/musl/package.use.mask +++ b/profiles/default/linux/musl/package.use.mask @@ -7,6 +7,9 @@ net-misc/iputils idn # See bug #504200 sys-devel/gcc sanitize +# Disable sanitizers for LLVM, see bug #753935 +sys-devel/clang-runtime sanitize + # These cause collisions with # even with --without-included-gettext sys-devel/gettext nls diff --git a/profiles/default/linux/package.use.mask b/profiles/default/linux/package.use.mask index 2210983ff5a8..e9696e924b91 100644 --- a/profiles/default/linux/package.use.mask +++ b/profiles/default/linux/package.use.mask @@ -2,7 +2,7 @@ # Distributed under the terms of the GNU General Public License v2 # Tony Vroon (2020-10-01) -# Upstream requires Lua 5.2 which is not a satisfiable +# Upstream requires Lua 5.2 which is not a satisfiable # dependency at this point in time. app-arch/rpm lua @@ -20,10 +20,6 @@ net-fs/samba fam # One example: https://tracker.ceph.com/issues/41523 >=sys-cluster/ceph-14.2 dpdk -# Jason Zaman (2015-09-06) -# This is masked in base/package.use.mask as Linux only. -sys-auth/consolekit -cgroups - # Michael Palimaka (2015-09-03) # Native inotify support is preferred on linux. kde-frameworks/kcoreaddons fam @@ -44,10 +40,6 @@ sys-auth/pam_mktemp -prevent-removal sys-devel/gcc hardened sys-libs/glibc hardened -# Samuli Suominen (2012-01-10) # Masked in base/package.use.mask as Linux -only feature app-arch/libarchive -e2fsprogs -- cgit v1.2.3