From ceeeb463cc1eef97fd62eaee8bf2196ba04bc384 Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Sat, 29 Feb 2020 18:01:47 +0000 Subject: gentoo (leap year) resync : 29.02.2020 --- net-analyzer/zabbix/files/3.0/zabbix_proxy.conf | 674 ------------------------ 1 file changed, 674 deletions(-) delete mode 100644 net-analyzer/zabbix/files/3.0/zabbix_proxy.conf (limited to 'net-analyzer/zabbix/files/3.0/zabbix_proxy.conf') diff --git a/net-analyzer/zabbix/files/3.0/zabbix_proxy.conf b/net-analyzer/zabbix/files/3.0/zabbix_proxy.conf deleted file mode 100644 index f96b0d01f51e..000000000000 --- a/net-analyzer/zabbix/files/3.0/zabbix_proxy.conf +++ /dev/null @@ -1,674 +0,0 @@ -# This is a configuration file for Zabbix proxy daemon -# To get more information about Zabbix, visit http://www.zabbix.com - -############ GENERAL PARAMETERS ################# - -### Option: ProxyMode -# Proxy operating mode. -# 0 - proxy in the active mode -# 1 - proxy in the passive mode -# -# Mandatory: no -# Default: -# ProxyMode=0 - -### Option: Server -# IP address (or hostname) of Zabbix server. -# Active proxy will get configuration data from the server. -# For a proxy in the passive mode this parameter will be ignored. -# -# Mandatory: yes (if ProxyMode is set to 0) -# Default: -# Server= - -Server=127.0.0.1 - -### Option: ServerPort -# Port of Zabbix trapper on Zabbix server. -# For a proxy in the passive mode this parameter will be ignored. -# -# Mandatory: no -# Range: 1024-32767 -# Default: -# ServerPort=10051 - -### Option: Hostname -# Unique, case sensitive Proxy name. Make sure the Proxy name is known to the server! -# Value is acquired from HostnameItem if undefined. -# -# Mandatory: no -# Default: -# Hostname= - -Hostname=Zabbix proxy - -### Option: HostnameItem -# Item used for generating Hostname if it is undefined. -# Ignored if Hostname is defined. -# -# Mandatory: no -# Default: -# HostnameItem=system.hostname - -### Option: ListenPort -# Listen port for trapper. -# -# Mandatory: no -# Range: 1024-32767 -# Default: -# ListenPort=10051 - -### Option: SourceIP -# Source IP address for outgoing connections. -# -# Mandatory: no -# Default: -# SourceIP= - -### Option: LogType -# Specifies where log messages are written to: -# system - syslog -# file - file specified with LogFile parameter -# console - standard output -# -# Mandatory: no -# Default: -# LogType=file - -### Option: LogFile -# Log file name for LogType 'file' parameter. -# -# Mandatory: no -# Default: -# LogFile= - -LogFile=/var/log/zabbix/zabbix_proxy.log - -### Option: LogFileSize -# Maximum size of log file in MB. -# 0 - disable automatic log rotation. -# -# Mandatory: no -# Range: 0-1024 -# Default: -# LogFileSize=1 -LogFileSize=128 - -### Option: DebugLevel -# Specifies debug level: -# 0 - basic information about starting and stopping of Zabbix processes -# 1 - critical information -# 2 - error information -# 3 - warnings -# 4 - for debugging (produces lots of information) -# 5 - extended debugging (produces even more information) -# -# Mandatory: no -# Range: 0-5 -# Default: -# DebugLevel=3 - -### Option: PidFile -# Name of PID file. -# -# Mandatory: no -# Default: -# PidFile=/tmp/zabbix_proxy.pid -PidFile=/run/zabbix/zabbix_proxy.pid - -### Option: DBHost -# Database host name. -# If set to localhost, socket is used for MySQL. -# If set to empty string, socket is used for PostgreSQL. -# -# Mandatory: no -# Default: -# DBHost=localhost - -### Option: DBName -# Database name. -# For SQLite3 path to database file must be provided. DBUser and DBPassword are ignored. -# Warning: do not attempt to use the same database Zabbix server is using. -# -# Mandatory: yes -# Default: -# DBName= - -DBName=zabbix_proxy - -### Option: DBSchema -# Schema name. Used for IBM DB2 and PostgreSQL. -# -# Mandatory: no -# Default: -# DBSchema= - -### Option: DBUser -# Database user. Ignored for SQLite. -# -# Default: -# DBUser= - -DBUser=zabbix - -### Option: DBPassword -# Database password. Ignored for SQLite. -# Comment this line if no password is used. -# -# Mandatory: no -# Default: -# DBPassword= - -### Option: DBSocket -# Path to MySQL socket. -# -# Mandatory: no -# Default: -# DBSocket=/tmp/mysql.sock - -# Option: DBPort -# Database port when not using local socket. Ignored for SQLite. -# -# Mandatory: no -# Default (for MySQL): -# DBPort=3306 - -######### PROXY SPECIFIC PARAMETERS ############# - -### Option: ProxyLocalBuffer -# Proxy will keep data locally for N hours, even if the data have already been synced with the server. -# This parameter may be used if local data will be used by third party applications. -# -# Mandatory: no -# Range: 0-720 -# Default: -# ProxyLocalBuffer=0 - -### Option: ProxyOfflineBuffer -# Proxy will keep data for N hours in case if no connectivity with Zabbix Server. -# Older data will be lost. -# -# Mandatory: no -# Range: 1-720 -# Default: -# ProxyOfflineBuffer=1 - -### Option: HeartbeatFrequency -# Frequency of heartbeat messages in seconds. -# Used for monitoring availability of Proxy on server side. -# 0 - heartbeat messages disabled. -# For a proxy in the passive mode this parameter will be ignored. -# -# Mandatory: no -# Range: 0-3600 -# Default: -# HeartbeatFrequency=60 - -### Option: ConfigFrequency -# How often proxy retrieves configuration data from Zabbix Server in seconds. -# For a proxy in the passive mode this parameter will be ignored. -# -# Mandatory: no -# Range: 1-3600*24*7 -# Default: -# ConfigFrequency=3600 - -### Option: DataSenderFrequency -# Proxy will send collected data to the Server every N seconds. -# For a proxy in the passive mode this parameter will be ignored. -# -# Mandatory: no -# Range: 1-3600 -# Default: -# DataSenderFrequency=1 - -############ ADVANCED PARAMETERS ################ - -### Option: StartPollers -# Number of pre-forked instances of pollers. -# -# Mandatory: no -# Range: 0-1000 -# Default: -# StartPollers=5 - -### Option: StartIPMIPollers -# Number of pre-forked instances of IPMI pollers. -# -# Mandatory: no -# Range: 0-1000 -# Default: -# StartIPMIPollers=0 - -### Option: StartPollersUnreachable -# Number of pre-forked instances of pollers for unreachable hosts (including IPMI and Java). -# At least one poller for unreachable hosts must be running if regular, IPMI or Java pollers -# are started. -# -# Mandatory: no -# Range: 0-1000 -# Default: -# StartPollersUnreachable=1 - -### Option: StartTrappers -# Number of pre-forked instances of trappers. -# Trappers accept incoming connections from Zabbix sender and active agents. -# -# Mandatory: no -# Range: 0-1000 -# Default: -# StartTrappers=5 - -### Option: StartPingers -# Number of pre-forked instances of ICMP pingers. -# -# Mandatory: no -# Range: 0-1000 -# Default: -# StartPingers=1 - -### Option: StartDiscoverers -# Number of pre-forked instances of discoverers. -# -# Mandatory: no -# Range: 0-250 -# Default: -# StartDiscoverers=1 - -### Option: StartHTTPPollers -# Number of pre-forked instances of HTTP pollers. -# -# Mandatory: no -# Range: 0-1000 -# Default: -# StartHTTPPollers=1 - -### Option: JavaGateway -# IP address (or hostname) of Zabbix Java gateway. -# Only required if Java pollers are started. -# -# Mandatory: no -# Default: -# JavaGateway= - -### Option: JavaGatewayPort -# Port that Zabbix Java gateway listens on. -# -# Mandatory: no -# Range: 1024-32767 -# Default: -# JavaGatewayPort=10052 - -### Option: StartJavaPollers -# Number of pre-forked instances of Java pollers. -# -# Mandatory: no -# Range: 0-1000 -# Default: -# StartJavaPollers=0 - -### Option: StartVMwareCollectors -# Number of pre-forked vmware collector instances. -# -# Mandatory: no -# Range: 0-250 -# Default: -# StartVMwareCollectors=0 - -### Option: VMwareFrequency -# How often Zabbix will connect to VMware service to obtain a new data. -# -# Mandatory: no -# Range: 10-86400 -# Default: -# VMwareFrequency=60 - -### Option: VMwarePerfFrequency -# How often Zabbix will connect to VMware service to obtain performance data. -# -# Mandatory: no -# Range: 10-86400 -# Default: -# VMwarePerfFrequency=60 - -### Option: VMwareCacheSize -# Size of VMware cache, in bytes. -# Shared memory size for storing VMware data. -# Only used if VMware collectors are started. -# -# Mandatory: no -# Range: 256K-2G -# Default: -# VMwareCacheSize=8M - -### Option: VMwareTimeout -# Specifies how many seconds vmware collector waits for response from VMware service. -# -# Mandatory: no -# Range: 1-300 -# Default: -# VMwareTimeout=10 - -### Option: SNMPTrapperFile -# Temporary file used for passing data from SNMP trap daemon to the proxy. -# Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file. -# -# Mandatory: no -# Default: -# SNMPTrapperFile=/tmp/zabbix_traps.tmp - -### Option: StartSNMPTrapper -# If 1, SNMP trapper process is started. -# -# Mandatory: no -# Range: 0-1 -# Default: -# StartSNMPTrapper=0 - -### Option: ListenIP -# List of comma delimited IP addresses that the trapper should listen on. -# Trapper will listen on all network interfaces if this parameter is missing. -# -# Mandatory: no -# Default: -# ListenIP=0.0.0.0 - -### Option: HousekeepingFrequency -# How often Zabbix will perform housekeeping procedure (in hours). -# Housekeeping is removing outdated information from the database. -# To prevent Housekeeper from being overloaded, no more than 4 times HousekeepingFrequency -# hours of outdated information are deleted in one housekeeping cycle. -# To lower load on proxy startup housekeeping is postponed for 30 minutes after proxy start. -# With HousekeepingFrequency=0 the housekeeper can be only executed using the runtime control option. -# In this case the period of outdated information deleted in one housekeeping cycle is 4 times the -# period since the last housekeeping cycle, but not less than 4 hours and not greater than 4 days. -# -# Mandatory: no -# Range: 0-24 -# Default: -# HousekeepingFrequency=1 - -### Option: CacheSize -# Size of configuration cache, in bytes. -# Shared memory size, for storing hosts and items data. -# -# Mandatory: no -# Range: 128K-8G -# Default: -# CacheSize=8M - -### Option: StartDBSyncers -# Number of pre-forked instances of DB Syncers. -# -# Mandatory: no -# Range: 1-100 -# Default: -# StartDBSyncers=4 - -### Option: HistoryCacheSize -# Size of history cache, in bytes. -# Shared memory size for storing history data. -# -# Mandatory: no -# Range: 128K-2G -# Default: -# HistoryCacheSize=16M - -### Option: HistoryIndexCacheSize -# Size of history index cache, in bytes. -# Shared memory size for indexing history cache. -# -# Mandatory: no -# Range: 128K-2G -# Default: -# HistoryIndexCacheSize=4M - -### Option: Timeout -# Specifies how long we wait for agent, SNMP device or external check (in seconds). -# -# Mandatory: no -# Range: 1-30 -# Default: -# Timeout=3 - -Timeout=4 - -### Option: TrapperTimeout -# Specifies how many seconds trapper may spend processing new data. -# -# Mandatory: no -# Range: 1-300 -# Default: -# TrapperTimeout=300 - -### Option: UnreachablePeriod -# After how many seconds of unreachability treat a host as unavailable. -# -# Mandatory: no -# Range: 1-3600 -# Default: -# UnreachablePeriod=45 - -### Option: UnavailableDelay -# How often host is checked for availability during the unavailability period, in seconds. -# -# Mandatory: no -# Range: 1-3600 -# Default: -# UnavailableDelay=60 - -### Option: UnreachableDelay -# How often host is checked for availability during the unreachability period, in seconds. -# -# Mandatory: no -# Range: 1-3600 -# Default: -# UnreachableDelay=15 - -### Option: ExternalScripts -# Full path to location of external scripts. -# Default depends on compilation options. -# -# Mandatory: no -# Default: -# ExternalScripts=${datadir}/zabbix/externalscripts - -### Option: FpingLocation -# Location of fping. -# Make sure that fping binary has root ownership and SUID flag set. -# -# Mandatory: no -# Default: -# FpingLocation=/usr/sbin/fping - -### Option: Fping6Location -# Location of fping6. -# Make sure that fping6 binary has root ownership and SUID flag set. -# Make empty if your fping utility is capable to process IPv6 addresses. -# -# Mandatory: no -# Default: -# Fping6Location=/usr/sbin/fping6 - -### Option: SSHKeyLocation -# Location of public and private keys for SSH checks and actions. -# -# Mandatory: no -# Default: -# SSHKeyLocation= - -### Option: LogSlowQueries -# How long a database query may take before being logged (in milliseconds). -# Only works if DebugLevel set to 3 or 4. -# 0 - don't log slow queries. -# -# Mandatory: no -# Range: 1-3600000 -# Default: -# LogSlowQueries=0 - -LogSlowQueries=3000 - -### Option: TmpDir -# Temporary directory. -# -# Mandatory: no -# Default: -# TmpDir=/tmp - -### Option: AllowRoot -# Allow the proxy to run as 'root'. If disabled and the proxy is started by 'root', the proxy -# will try to switch to the user specified by the User configuration option instead. -# Has no effect if started under a regular user. -# 0 - do not allow -# 1 - allow -# -# Mandatory: no -# Default: -# AllowRoot=0 - -### Option: User -# Drop privileges to a specific, existing user on the system. -# Only has effect if run as 'root' and AllowRoot is disabled. -# -# Mandatory: no -# Default: -# User=zabbix - -### Option: Include -# You may include individual files or all files in a directory in the configuration file. -# Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time. -# -# Mandatory: no -# Default: -# Include= - -# Include=/usr/local/etc/zabbix_proxy.general.conf -# Include=/usr/local/etc/zabbix_proxy.conf.d/ -# Include=/usr/local/etc/zabbix_proxy.conf.d/*.conf - -### Option: SSLCertLocation -# Location of SSL client certificates. -# This parameter is used only in web monitoring. -# -# Mandatory: no -# Default: -# SSLCertLocation=${datadir}/zabbix/ssl/certs - -### Option: SSLKeyLocation -# Location of private keys for SSL client certificates. -# This parameter is used only in web monitoring. -# -# Mandatory: no -# Default: -# SSLKeyLocation=${datadir}/zabbix/ssl/keys - -### Option: SSLCALocation -# Location of certificate authority (CA) files for SSL server certificate verification. -# If not set, system-wide directory will be used. -# This parameter is used only in web monitoring. -# -# Mandatory: no -# Default: -# SSLCALocation= - -####### LOADABLE MODULES ####### - -### Option: LoadModulePath -# Full path to location of proxy modules. -# Default depends on compilation options. -# -# Mandatory: no -# Default: -# LoadModulePath=${libdir}/modules - -### Option: LoadModule -# Module to load at proxy startup. Modules are used to extend functionality of the proxy. -# Format: LoadModule= -# The modules must be located in directory specified by LoadModulePath. -# It is allowed to include multiple LoadModule parameters. -# -# Mandatory: no -# Default: -# LoadModule= - -####### TLS-RELATED PARAMETERS ####### - -### Option: TLSConnect -# How the proxy should connect to Zabbix server. Used for an active proxy, ignored on a passive proxy. -# Only one value can be specified: -# unencrypted - connect without encryption -# psk - connect using TLS and a pre-shared key -# cert - connect using TLS and a certificate -# -# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection) -# Default: -# TLSConnect=unencrypted - -### Option: TLSAccept -# What incoming connections to accept from Zabbix server. Used for a passive proxy, ignored on an active proxy. -# Multiple values can be specified, separated by comma: -# unencrypted - accept connections without encryption -# psk - accept connections secured with TLS and a pre-shared key -# cert - accept connections secured with TLS and a certificate -# -# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection) -# Default: -# TLSAccept=unencrypted - -### Option: TLSCAFile -# Full pathname of a file containing the top-level CA(s) certificates for -# peer certificate verification. -# -# Mandatory: no -# Default: -# TLSCAFile= - -### Option: TLSCRLFile -# Full pathname of a file containing revoked certificates. -# -# Mandatory: no -# Default: -# TLSCRLFile= - -### Option: TLSServerCertIssuer -# Allowed server certificate issuer. -# -# Mandatory: no -# Default: -# TLSServerCertIssuer= - -### Option: TLSServerCertSubject -# Allowed server certificate subject. -# -# Mandatory: no -# Default: -# TLSServerCertSubject= - -### Option: TLSCertFile -# Full pathname of a file containing the proxy certificate or certificate chain. -# -# Mandatory: no -# Default: -# TLSCertFile= - -### Option: TLSKeyFile -# Full pathname of a file containing the proxy private key. -# -# Mandatory: no -# Default: -# TLSKeyFile= - -### Option: TLSPSKIdentity -# Unique, case sensitive string used to identify the pre-shared key. -# -# Mandatory: no -# Default: -# TLSPSKIdentity= - -### Option: TLSPSKFile -# Full pathname of a file containing the pre-shared key. -# -# Mandatory: no -# Default: -# TLSPSKFile= -- cgit v1.2.3